| /* | |
| * BSG helper library | |
| * | |
| * Copyright (C) 2008 James Smart, Emulex Corporation | |
| * Copyright (C) 2011 Red Hat, Inc. All rights reserved. | |
| * Copyright (C) 2011 Mike Christie | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| * | |
| */ | |
| #include <linux/slab.h> | |
| #include <linux/blkdev.h> | |
| #include <linux/delay.h> | |
| #include <linux/scatterlist.h> | |
| #include <linux/bsg-lib.h> | |
| #include <linux/export.h> | |
| #include <scsi/scsi_cmnd.h> | |
| #include <scsi/sg.h> | |
| #define uptr64(val) ((void __user *)(uintptr_t)(val)) | |
| static int bsg_transport_check_proto(struct sg_io_v4 *hdr) | |
| { | |
| if (hdr->protocol != BSG_PROTOCOL_SCSI || | |
| hdr->subprotocol != BSG_SUB_PROTOCOL_SCSI_TRANSPORT) | |
| return -EINVAL; | |
| if (!capable(CAP_SYS_RAWIO)) | |
| return -EPERM; | |
| return 0; | |
| } | |
| static int bsg_transport_fill_hdr(struct request *rq, struct sg_io_v4 *hdr, | |
| fmode_t mode) | |
| { | |
| struct bsg_job *job = blk_mq_rq_to_pdu(rq); | |
| job->request_len = hdr->request_len; | |
| job->request = memdup_user(uptr64(hdr->request), hdr->request_len); | |
| if (IS_ERR(job->request)) | |
| return PTR_ERR(job->request); | |
| return 0; | |
| } | |
| static int bsg_transport_complete_rq(struct request *rq, struct sg_io_v4 *hdr) | |
| { | |
| struct bsg_job *job = blk_mq_rq_to_pdu(rq); | |
| int ret = 0; | |
| /* | |
| * The assignments below don't make much sense, but are kept for | |
| * bug by bug backwards compatibility: | |
| */ | |
| hdr->device_status = job->result & 0xff; | |
| hdr->transport_status = host_byte(job->result); | |
| hdr->driver_status = driver_byte(job->result); | |
| hdr->info = 0; | |
| if (hdr->device_status || hdr->transport_status || hdr->driver_status) | |
| hdr->info |= SG_INFO_CHECK; | |
| hdr->response_len = 0; | |
| if (job->result < 0) { | |
| /* we're only returning the result field in the reply */ | |
| job->reply_len = sizeof(u32); | |
| ret = job->result; | |
| } | |
| if (job->reply_len && hdr->response) { | |
| int len = min(hdr->max_response_len, job->reply_len); | |
| if (copy_to_user(uptr64(hdr->response), job->reply, len)) | |
| ret = -EFAULT; | |
| else | |
| hdr->response_len = len; | |
| } | |
| /* we assume all request payload was transferred, residual == 0 */ | |
| hdr->dout_resid = 0; | |
| if (rq->next_rq) { | |
| unsigned int rsp_len = job->reply_payload.payload_len; | |
| if (WARN_ON(job->reply_payload_rcv_len > rsp_len)) | |
| hdr->din_resid = 0; | |
| else | |
| hdr->din_resid = rsp_len - job->reply_payload_rcv_len; | |
| } else { | |
| hdr->din_resid = 0; | |
| } | |
| return ret; | |
| } | |
| static void bsg_transport_free_rq(struct request *rq) | |
| { | |
| struct bsg_job *job = blk_mq_rq_to_pdu(rq); | |
| kfree(job->request); | |
| } | |
| static const struct bsg_ops bsg_transport_ops = { | |
| .check_proto = bsg_transport_check_proto, | |
| .fill_hdr = bsg_transport_fill_hdr, | |
| .complete_rq = bsg_transport_complete_rq, | |
| .free_rq = bsg_transport_free_rq, | |
| }; | |
| /** | |
| * bsg_teardown_job - routine to teardown a bsg job | |
| * @kref: kref inside bsg_job that is to be torn down | |
| */ | |
| static void bsg_teardown_job(struct kref *kref) | |
| { | |
| struct bsg_job *job = container_of(kref, struct bsg_job, kref); | |
| struct request *rq = blk_mq_rq_from_pdu(job); | |
| put_device(job->dev); /* release reference for the request */ | |
| kfree(job->request_payload.sg_list); | |
| kfree(job->reply_payload.sg_list); | |
| blk_end_request_all(rq, BLK_STS_OK); | |
| } | |
| void bsg_job_put(struct bsg_job *job) | |
| { | |
| kref_put(&job->kref, bsg_teardown_job); | |
| } | |
| EXPORT_SYMBOL_GPL(bsg_job_put); | |
| int bsg_job_get(struct bsg_job *job) | |
| { | |
| return kref_get_unless_zero(&job->kref); | |
| } | |
| EXPORT_SYMBOL_GPL(bsg_job_get); | |
| /** | |
| * bsg_job_done - completion routine for bsg requests | |
| * @job: bsg_job that is complete | |
| * @result: job reply result | |
| * @reply_payload_rcv_len: length of payload recvd | |
| * | |
| * The LLD should call this when the bsg job has completed. | |
| */ | |
| void bsg_job_done(struct bsg_job *job, int result, | |
| unsigned int reply_payload_rcv_len) | |
| { | |
| job->result = result; | |
| job->reply_payload_rcv_len = reply_payload_rcv_len; | |
| blk_complete_request(blk_mq_rq_from_pdu(job)); | |
| } | |
| EXPORT_SYMBOL_GPL(bsg_job_done); | |
| /** | |
| * bsg_softirq_done - softirq done routine for destroying the bsg requests | |
| * @rq: BSG request that holds the job to be destroyed | |
| */ | |
| static void bsg_softirq_done(struct request *rq) | |
| { | |
| struct bsg_job *job = blk_mq_rq_to_pdu(rq); | |
| bsg_job_put(job); | |
| } | |
| static int bsg_map_buffer(struct bsg_buffer *buf, struct request *req) | |
| { | |
| size_t sz = (sizeof(struct scatterlist) * req->nr_phys_segments); | |
| BUG_ON(!req->nr_phys_segments); | |
| buf->sg_list = kzalloc(sz, GFP_KERNEL); | |
| if (!buf->sg_list) | |
| return -ENOMEM; | |
| sg_init_table(buf->sg_list, req->nr_phys_segments); | |
| buf->sg_cnt = blk_rq_map_sg(req->q, req, buf->sg_list); | |
| buf->payload_len = blk_rq_bytes(req); | |
| return 0; | |
| } | |
| /** | |
| * bsg_prepare_job - create the bsg_job structure for the bsg request | |
| * @dev: device that is being sent the bsg request | |
| * @req: BSG request that needs a job structure | |
| */ | |
| static bool bsg_prepare_job(struct device *dev, struct request *req) | |
| { | |
| struct request *rsp = req->next_rq; | |
| struct bsg_job *job = blk_mq_rq_to_pdu(req); | |
| int ret; | |
| job->timeout = req->timeout; | |
| if (req->bio) { | |
| ret = bsg_map_buffer(&job->request_payload, req); | |
| if (ret) | |
| goto failjob_rls_job; | |
| } | |
| if (rsp && rsp->bio) { | |
| ret = bsg_map_buffer(&job->reply_payload, rsp); | |
| if (ret) | |
| goto failjob_rls_rqst_payload; | |
| } | |
| job->dev = dev; | |
| /* take a reference for the request */ | |
| get_device(job->dev); | |
| kref_init(&job->kref); | |
| return true; | |
| failjob_rls_rqst_payload: | |
| kfree(job->request_payload.sg_list); | |
| failjob_rls_job: | |
| job->result = -ENOMEM; | |
| return false; | |
| } | |
| /** | |
| * bsg_request_fn - generic handler for bsg requests | |
| * @q: request queue to manage | |
| * | |
| * On error the create_bsg_job function should return a -Exyz error value | |
| * that will be set to ->result. | |
| * | |
| * Drivers/subsys should pass this to the queue init function. | |
| */ | |
| static void bsg_request_fn(struct request_queue *q) | |
| __releases(q->queue_lock) | |
| __acquires(q->queue_lock) | |
| { | |
| struct device *dev = q->queuedata; | |
| struct request *req; | |
| int ret; | |
| if (!get_device(dev)) | |
| return; | |
| while (1) { | |
| req = blk_fetch_request(q); | |
| if (!req) | |
| break; | |
| spin_unlock_irq(q->queue_lock); | |
| if (!bsg_prepare_job(dev, req)) { | |
| blk_end_request_all(req, BLK_STS_OK); | |
| spin_lock_irq(q->queue_lock); | |
| continue; | |
| } | |
| ret = q->bsg_job_fn(blk_mq_rq_to_pdu(req)); | |
| spin_lock_irq(q->queue_lock); | |
| if (ret) | |
| break; | |
| } | |
| spin_unlock_irq(q->queue_lock); | |
| put_device(dev); | |
| spin_lock_irq(q->queue_lock); | |
| } | |
| /* called right after the request is allocated for the request_queue */ | |
| static int bsg_init_rq(struct request_queue *q, struct request *req, gfp_t gfp) | |
| { | |
| struct bsg_job *job = blk_mq_rq_to_pdu(req); | |
| job->reply = kzalloc(SCSI_SENSE_BUFFERSIZE, gfp); | |
| if (!job->reply) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| /* called right before the request is given to the request_queue user */ | |
| static void bsg_initialize_rq(struct request *req) | |
| { | |
| struct bsg_job *job = blk_mq_rq_to_pdu(req); | |
| void *reply = job->reply; | |
| memset(job, 0, sizeof(*job)); | |
| job->reply = reply; | |
| job->reply_len = SCSI_SENSE_BUFFERSIZE; | |
| job->dd_data = job + 1; | |
| } | |
| static void bsg_exit_rq(struct request_queue *q, struct request *req) | |
| { | |
| struct bsg_job *job = blk_mq_rq_to_pdu(req); | |
| kfree(job->reply); | |
| } | |
| /** | |
| * bsg_setup_queue - Create and add the bsg hooks so we can receive requests | |
| * @dev: device to attach bsg device to | |
| * @name: device to give bsg device | |
| * @job_fn: bsg job handler | |
| * @dd_job_size: size of LLD data needed for each job | |
| */ | |
| struct request_queue *bsg_setup_queue(struct device *dev, const char *name, | |
| bsg_job_fn *job_fn, int dd_job_size) | |
| { | |
| struct request_queue *q; | |
| int ret; | |
| q = blk_alloc_queue(GFP_KERNEL); | |
| if (!q) | |
| return ERR_PTR(-ENOMEM); | |
| q->cmd_size = sizeof(struct bsg_job) + dd_job_size; | |
| q->init_rq_fn = bsg_init_rq; | |
| q->exit_rq_fn = bsg_exit_rq; | |
| q->initialize_rq_fn = bsg_initialize_rq; | |
| q->request_fn = bsg_request_fn; | |
| ret = blk_init_allocated_queue(q); | |
| if (ret) | |
| goto out_cleanup_queue; | |
| q->queuedata = dev; | |
| q->bsg_job_fn = job_fn; | |
| blk_queue_flag_set(QUEUE_FLAG_BIDI, q); | |
| blk_queue_softirq_done(q, bsg_softirq_done); | |
| blk_queue_rq_timeout(q, BLK_DEFAULT_SG_TIMEOUT); | |
| ret = bsg_register_queue(q, dev, name, &bsg_transport_ops); | |
| if (ret) { | |
| printk(KERN_ERR "%s: bsg interface failed to " | |
| "initialize - register queue\n", dev->kobj.name); | |
| goto out_cleanup_queue; | |
| } | |
| return q; | |
| out_cleanup_queue: | |
| blk_cleanup_queue(q); | |
| return ERR_PTR(ret); | |
| } | |
| EXPORT_SYMBOL_GPL(bsg_setup_queue); |