| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * linux/fs/ioctl.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| */ | |
| #include <linux/syscalls.h> | |
| #include <linux/mm.h> | |
| #include <linux/capability.h> | |
| #include <linux/file.h> | |
| #include <linux/fs.h> | |
| #include <linux/security.h> | |
| #include <linux/export.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/writeback.h> | |
| #include <linux/buffer_head.h> | |
| #include <linux/falloc.h> | |
| #include <linux/sched/signal.h> | |
| #include "internal.h" | |
| #include <asm/ioctls.h> | |
| /* So that the fiemap access checks can't overflow on 32 bit machines. */ | |
| #define FIEMAP_MAX_EXTENTS (UINT_MAX / sizeof(struct fiemap_extent)) | |
| /** | |
| * vfs_ioctl - call filesystem specific ioctl methods | |
| * @filp: open file to invoke ioctl method on | |
| * @cmd: ioctl command to execute | |
| * @arg: command-specific argument for ioctl | |
| * | |
| * Invokes filesystem specific ->unlocked_ioctl, if one exists; otherwise | |
| * returns -ENOTTY. | |
| * | |
| * Returns 0 on success, -errno on error. | |
| */ | |
| long vfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) | |
| { | |
| int error = -ENOTTY; | |
| if (!filp->f_op->unlocked_ioctl) | |
| goto out; | |
| error = filp->f_op->unlocked_ioctl(filp, cmd, arg); | |
| if (error == -ENOIOCTLCMD) | |
| error = -ENOTTY; | |
| out: | |
| return error; | |
| } | |
| static int ioctl_fibmap(struct file *filp, int __user *p) | |
| { | |
| struct address_space *mapping = filp->f_mapping; | |
| int res, block; | |
| /* do we support this mess? */ | |
| if (!mapping->a_ops->bmap) | |
| return -EINVAL; | |
| if (!capable(CAP_SYS_RAWIO)) | |
| return -EPERM; | |
| res = get_user(block, p); | |
| if (res) | |
| return res; | |
| res = mapping->a_ops->bmap(mapping, block); | |
| return put_user(res, p); | |
| } | |
| /** | |
| * fiemap_fill_next_extent - Fiemap helper function | |
| * @fieinfo: Fiemap context passed into ->fiemap | |
| * @logical: Extent logical start offset, in bytes | |
| * @phys: Extent physical start offset, in bytes | |
| * @len: Extent length, in bytes | |
| * @flags: FIEMAP_EXTENT flags that describe this extent | |
| * | |
| * Called from file system ->fiemap callback. Will populate extent | |
| * info as passed in via arguments and copy to user memory. On | |
| * success, extent count on fieinfo is incremented. | |
| * | |
| * Returns 0 on success, -errno on error, 1 if this was the last | |
| * extent that will fit in user array. | |
| */ | |
| #define SET_UNKNOWN_FLAGS (FIEMAP_EXTENT_DELALLOC) | |
| #define SET_NO_UNMOUNTED_IO_FLAGS (FIEMAP_EXTENT_DATA_ENCRYPTED) | |
| #define SET_NOT_ALIGNED_FLAGS (FIEMAP_EXTENT_DATA_TAIL|FIEMAP_EXTENT_DATA_INLINE) | |
| int fiemap_fill_next_extent(struct fiemap_extent_info *fieinfo, u64 logical, | |
| u64 phys, u64 len, u32 flags) | |
| { | |
| struct fiemap_extent extent; | |
| struct fiemap_extent __user *dest = fieinfo->fi_extents_start; | |
| /* only count the extents */ | |
| if (fieinfo->fi_extents_max == 0) { | |
| fieinfo->fi_extents_mapped++; | |
| return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; | |
| } | |
| if (fieinfo->fi_extents_mapped >= fieinfo->fi_extents_max) | |
| return 1; | |
| if (flags & SET_UNKNOWN_FLAGS) | |
| flags |= FIEMAP_EXTENT_UNKNOWN; | |
| if (flags & SET_NO_UNMOUNTED_IO_FLAGS) | |
| flags |= FIEMAP_EXTENT_ENCODED; | |
| if (flags & SET_NOT_ALIGNED_FLAGS) | |
| flags |= FIEMAP_EXTENT_NOT_ALIGNED; | |
| memset(&extent, 0, sizeof(extent)); | |
| extent.fe_logical = logical; | |
| extent.fe_physical = phys; | |
| extent.fe_length = len; | |
| extent.fe_flags = flags; | |
| dest += fieinfo->fi_extents_mapped; | |
| if (copy_to_user(dest, &extent, sizeof(extent))) | |
| return -EFAULT; | |
| fieinfo->fi_extents_mapped++; | |
| if (fieinfo->fi_extents_mapped == fieinfo->fi_extents_max) | |
| return 1; | |
| return (flags & FIEMAP_EXTENT_LAST) ? 1 : 0; | |
| } | |
| EXPORT_SYMBOL(fiemap_fill_next_extent); | |
| /** | |
| * fiemap_check_flags - check validity of requested flags for fiemap | |
| * @fieinfo: Fiemap context passed into ->fiemap | |
| * @fs_flags: Set of fiemap flags that the file system understands | |
| * | |
| * Called from file system ->fiemap callback. This will compute the | |
| * intersection of valid fiemap flags and those that the fs supports. That | |
| * value is then compared against the user supplied flags. In case of bad user | |
| * flags, the invalid values will be written into the fieinfo structure, and | |
| * -EBADR is returned, which tells ioctl_fiemap() to return those values to | |
| * userspace. For this reason, a return code of -EBADR should be preserved. | |
| * | |
| * Returns 0 on success, -EBADR on bad flags. | |
| */ | |
| int fiemap_check_flags(struct fiemap_extent_info *fieinfo, u32 fs_flags) | |
| { | |
| u32 incompat_flags; | |
| incompat_flags = fieinfo->fi_flags & ~(FIEMAP_FLAGS_COMPAT & fs_flags); | |
| if (incompat_flags) { | |
| fieinfo->fi_flags = incompat_flags; | |
| return -EBADR; | |
| } | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(fiemap_check_flags); | |
| static int fiemap_check_ranges(struct super_block *sb, | |
| u64 start, u64 len, u64 *new_len) | |
| { | |
| u64 maxbytes = (u64) sb->s_maxbytes; | |
| *new_len = len; | |
| if (len == 0) | |
| return -EINVAL; | |
| if (start > maxbytes) | |
| return -EFBIG; | |
| /* | |
| * Shrink request scope to what the fs can actually handle. | |
| */ | |
| if (len > maxbytes || (maxbytes - len) < start) | |
| *new_len = maxbytes - start; | |
| return 0; | |
| } | |
| static int ioctl_fiemap(struct file *filp, unsigned long arg) | |
| { | |
| struct fiemap fiemap; | |
| struct fiemap __user *ufiemap = (struct fiemap __user *) arg; | |
| struct fiemap_extent_info fieinfo = { 0, }; | |
| struct inode *inode = file_inode(filp); | |
| struct super_block *sb = inode->i_sb; | |
| u64 len; | |
| int error; | |
| if (!inode->i_op->fiemap) | |
| return -EOPNOTSUPP; | |
| if (copy_from_user(&fiemap, ufiemap, sizeof(fiemap))) | |
| return -EFAULT; | |
| if (fiemap.fm_extent_count > FIEMAP_MAX_EXTENTS) | |
| return -EINVAL; | |
| error = fiemap_check_ranges(sb, fiemap.fm_start, fiemap.fm_length, | |
| &len); | |
| if (error) | |
| return error; | |
| fieinfo.fi_flags = fiemap.fm_flags; | |
| fieinfo.fi_extents_max = fiemap.fm_extent_count; | |
| fieinfo.fi_extents_start = ufiemap->fm_extents; | |
| if (fiemap.fm_extent_count != 0 && | |
| !access_ok(VERIFY_WRITE, fieinfo.fi_extents_start, | |
| fieinfo.fi_extents_max * sizeof(struct fiemap_extent))) | |
| return -EFAULT; | |
| if (fieinfo.fi_flags & FIEMAP_FLAG_SYNC) | |
| filemap_write_and_wait(inode->i_mapping); | |
| error = inode->i_op->fiemap(inode, &fieinfo, fiemap.fm_start, len); | |
| fiemap.fm_flags = fieinfo.fi_flags; | |
| fiemap.fm_mapped_extents = fieinfo.fi_extents_mapped; | |
| if (copy_to_user(ufiemap, &fiemap, sizeof(fiemap))) | |
| error = -EFAULT; | |
| return error; | |
| } | |
| static long ioctl_file_clone(struct file *dst_file, unsigned long srcfd, | |
| u64 off, u64 olen, u64 destoff) | |
| { | |
| struct fd src_file = fdget(srcfd); | |
| int ret; | |
| if (!src_file.file) | |
| return -EBADF; | |
| ret = -EXDEV; | |
| if (src_file.file->f_path.mnt != dst_file->f_path.mnt) | |
| goto fdput; | |
| ret = do_clone_file_range(src_file.file, off, dst_file, destoff, olen); | |
| fdput: | |
| fdput(src_file); | |
| return ret; | |
| } | |
| static long ioctl_file_clone_range(struct file *file, void __user *argp) | |
| { | |
| struct file_clone_range args; | |
| if (copy_from_user(&args, argp, sizeof(args))) | |
| return -EFAULT; | |
| return ioctl_file_clone(file, args.src_fd, args.src_offset, | |
| args.src_length, args.dest_offset); | |
| } | |
| #ifdef CONFIG_BLOCK | |
| static inline sector_t logical_to_blk(struct inode *inode, loff_t offset) | |
| { | |
| return (offset >> inode->i_blkbits); | |
| } | |
| static inline loff_t blk_to_logical(struct inode *inode, sector_t blk) | |
| { | |
| return (blk << inode->i_blkbits); | |
| } | |
| /** | |
| * __generic_block_fiemap - FIEMAP for block based inodes (no locking) | |
| * @inode: the inode to map | |
| * @fieinfo: the fiemap info struct that will be passed back to userspace | |
| * @start: where to start mapping in the inode | |
| * @len: how much space to map | |
| * @get_block: the fs's get_block function | |
| * | |
| * This does FIEMAP for block based inodes. Basically it will just loop | |
| * through get_block until we hit the number of extents we want to map, or we | |
| * go past the end of the file and hit a hole. | |
| * | |
| * If it is possible to have data blocks beyond a hole past @inode->i_size, then | |
| * please do not use this function, it will stop at the first unmapped block | |
| * beyond i_size. | |
| * | |
| * If you use this function directly, you need to do your own locking. Use | |
| * generic_block_fiemap if you want the locking done for you. | |
| */ | |
| int __generic_block_fiemap(struct inode *inode, | |
| struct fiemap_extent_info *fieinfo, loff_t start, | |
| loff_t len, get_block_t *get_block) | |
| { | |
| struct buffer_head map_bh; | |
| sector_t start_blk, last_blk; | |
| loff_t isize = i_size_read(inode); | |
| u64 logical = 0, phys = 0, size = 0; | |
| u32 flags = FIEMAP_EXTENT_MERGED; | |
| bool past_eof = false, whole_file = false; | |
| int ret = 0; | |
| ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC); | |
| if (ret) | |
| return ret; | |
| /* | |
| * Either the i_mutex or other appropriate locking needs to be held | |
| * since we expect isize to not change at all through the duration of | |
| * this call. | |
| */ | |
| if (len >= isize) { | |
| whole_file = true; | |
| len = isize; | |
| } | |
| /* | |
| * Some filesystems can't deal with being asked to map less than | |
| * blocksize, so make sure our len is at least block length. | |
| */ | |
| if (logical_to_blk(inode, len) == 0) | |
| len = blk_to_logical(inode, 1); | |
| start_blk = logical_to_blk(inode, start); | |
| last_blk = logical_to_blk(inode, start + len - 1); | |
| do { | |
| /* | |
| * we set b_size to the total size we want so it will map as | |
| * many contiguous blocks as possible at once | |
| */ | |
| memset(&map_bh, 0, sizeof(struct buffer_head)); | |
| map_bh.b_size = len; | |
| ret = get_block(inode, start_blk, &map_bh, 0); | |
| if (ret) | |
| break; | |
| /* HOLE */ | |
| if (!buffer_mapped(&map_bh)) { | |
| start_blk++; | |
| /* | |
| * We want to handle the case where there is an | |
| * allocated block at the front of the file, and then | |
| * nothing but holes up to the end of the file properly, | |
| * to make sure that extent at the front gets properly | |
| * marked with FIEMAP_EXTENT_LAST | |
| */ | |
| if (!past_eof && | |
| blk_to_logical(inode, start_blk) >= isize) | |
| past_eof = 1; | |
| /* | |
| * First hole after going past the EOF, this is our | |
| * last extent | |
| */ | |
| if (past_eof && size) { | |
| flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST; | |
| ret = fiemap_fill_next_extent(fieinfo, logical, | |
| phys, size, | |
| flags); | |
| } else if (size) { | |
| ret = fiemap_fill_next_extent(fieinfo, logical, | |
| phys, size, flags); | |
| size = 0; | |
| } | |
| /* if we have holes up to/past EOF then we're done */ | |
| if (start_blk > last_blk || past_eof || ret) | |
| break; | |
| } else { | |
| /* | |
| * We have gone over the length of what we wanted to | |
| * map, and it wasn't the entire file, so add the extent | |
| * we got last time and exit. | |
| * | |
| * This is for the case where say we want to map all the | |
| * way up to the second to the last block in a file, but | |
| * the last block is a hole, making the second to last | |
| * block FIEMAP_EXTENT_LAST. In this case we want to | |
| * see if there is a hole after the second to last block | |
| * so we can mark it properly. If we found data after | |
| * we exceeded the length we were requesting, then we | |
| * are good to go, just add the extent to the fieinfo | |
| * and break | |
| */ | |
| if (start_blk > last_blk && !whole_file) { | |
| ret = fiemap_fill_next_extent(fieinfo, logical, | |
| phys, size, | |
| flags); | |
| break; | |
| } | |
| /* | |
| * if size != 0 then we know we already have an extent | |
| * to add, so add it. | |
| */ | |
| if (size) { | |
| ret = fiemap_fill_next_extent(fieinfo, logical, | |
| phys, size, | |
| flags); | |
| if (ret) | |
| break; | |
| } | |
| logical = blk_to_logical(inode, start_blk); | |
| phys = blk_to_logical(inode, map_bh.b_blocknr); | |
| size = map_bh.b_size; | |
| flags = FIEMAP_EXTENT_MERGED; | |
| start_blk += logical_to_blk(inode, size); | |
| /* | |
| * If we are past the EOF, then we need to make sure as | |
| * soon as we find a hole that the last extent we found | |
| * is marked with FIEMAP_EXTENT_LAST | |
| */ | |
| if (!past_eof && logical + size >= isize) | |
| past_eof = true; | |
| } | |
| cond_resched(); | |
| if (fatal_signal_pending(current)) { | |
| ret = -EINTR; | |
| break; | |
| } | |
| } while (1); | |
| /* If ret is 1 then we just hit the end of the extent array */ | |
| if (ret == 1) | |
| ret = 0; | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(__generic_block_fiemap); | |
| /** | |
| * generic_block_fiemap - FIEMAP for block based inodes | |
| * @inode: The inode to map | |
| * @fieinfo: The mapping information | |
| * @start: The initial block to map | |
| * @len: The length of the extect to attempt to map | |
| * @get_block: The block mapping function for the fs | |
| * | |
| * Calls __generic_block_fiemap to map the inode, after taking | |
| * the inode's mutex lock. | |
| */ | |
| int generic_block_fiemap(struct inode *inode, | |
| struct fiemap_extent_info *fieinfo, u64 start, | |
| u64 len, get_block_t *get_block) | |
| { | |
| int ret; | |
| inode_lock(inode); | |
| ret = __generic_block_fiemap(inode, fieinfo, start, len, get_block); | |
| inode_unlock(inode); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(generic_block_fiemap); | |
| #endif /* CONFIG_BLOCK */ | |
| /* | |
| * This provides compatibility with legacy XFS pre-allocation ioctls | |
| * which predate the fallocate syscall. | |
| * | |
| * Only the l_start, l_len and l_whence fields of the 'struct space_resv' | |
| * are used here, rest are ignored. | |
| */ | |
| int ioctl_preallocate(struct file *filp, void __user *argp) | |
| { | |
| struct inode *inode = file_inode(filp); | |
| struct space_resv sr; | |
| if (copy_from_user(&sr, argp, sizeof(sr))) | |
| return -EFAULT; | |
| switch (sr.l_whence) { | |
| case SEEK_SET: | |
| break; | |
| case SEEK_CUR: | |
| sr.l_start += filp->f_pos; | |
| break; | |
| case SEEK_END: | |
| sr.l_start += i_size_read(inode); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| return vfs_fallocate(filp, FALLOC_FL_KEEP_SIZE, sr.l_start, sr.l_len); | |
| } | |
| static int file_ioctl(struct file *filp, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| struct inode *inode = file_inode(filp); | |
| int __user *p = (int __user *)arg; | |
| switch (cmd) { | |
| case FIBMAP: | |
| return ioctl_fibmap(filp, p); | |
| case FIONREAD: | |
| return put_user(i_size_read(inode) - filp->f_pos, p); | |
| case FS_IOC_RESVSP: | |
| case FS_IOC_RESVSP64: | |
| return ioctl_preallocate(filp, p); | |
| } | |
| return vfs_ioctl(filp, cmd, arg); | |
| } | |
| static int ioctl_fionbio(struct file *filp, int __user *argp) | |
| { | |
| unsigned int flag; | |
| int on, error; | |
| error = get_user(on, argp); | |
| if (error) | |
| return error; | |
| flag = O_NONBLOCK; | |
| #ifdef __sparc__ | |
| /* SunOS compatibility item. */ | |
| if (O_NONBLOCK != O_NDELAY) | |
| flag |= O_NDELAY; | |
| #endif | |
| spin_lock(&filp->f_lock); | |
| if (on) | |
| filp->f_flags |= flag; | |
| else | |
| filp->f_flags &= ~flag; | |
| spin_unlock(&filp->f_lock); | |
| return error; | |
| } | |
| static int ioctl_fioasync(unsigned int fd, struct file *filp, | |
| int __user *argp) | |
| { | |
| unsigned int flag; | |
| int on, error; | |
| error = get_user(on, argp); | |
| if (error) | |
| return error; | |
| flag = on ? FASYNC : 0; | |
| /* Did FASYNC state change ? */ | |
| if ((flag ^ filp->f_flags) & FASYNC) { | |
| if (filp->f_op->fasync) | |
| /* fasync() adjusts filp->f_flags */ | |
| error = filp->f_op->fasync(fd, filp, on); | |
| else | |
| error = -ENOTTY; | |
| } | |
| return error < 0 ? error : 0; | |
| } | |
| static int ioctl_fsfreeze(struct file *filp) | |
| { | |
| struct super_block *sb = file_inode(filp)->i_sb; | |
| if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| /* If filesystem doesn't support freeze feature, return. */ | |
| if (sb->s_op->freeze_fs == NULL && sb->s_op->freeze_super == NULL) | |
| return -EOPNOTSUPP; | |
| /* Freeze */ | |
| if (sb->s_op->freeze_super) | |
| return sb->s_op->freeze_super(sb); | |
| return freeze_super(sb); | |
| } | |
| static int ioctl_fsthaw(struct file *filp) | |
| { | |
| struct super_block *sb = file_inode(filp)->i_sb; | |
| if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN)) | |
| return -EPERM; | |
| /* Thaw */ | |
| if (sb->s_op->thaw_super) | |
| return sb->s_op->thaw_super(sb); | |
| return thaw_super(sb); | |
| } | |
| static int ioctl_file_dedupe_range(struct file *file, void __user *arg) | |
| { | |
| struct file_dedupe_range __user *argp = arg; | |
| struct file_dedupe_range *same = NULL; | |
| int ret; | |
| unsigned long size; | |
| u16 count; | |
| if (get_user(count, &argp->dest_count)) { | |
| ret = -EFAULT; | |
| goto out; | |
| } | |
| size = offsetof(struct file_dedupe_range __user, info[count]); | |
| if (size > PAGE_SIZE) { | |
| ret = -ENOMEM; | |
| goto out; | |
| } | |
| same = memdup_user(argp, size); | |
| if (IS_ERR(same)) { | |
| ret = PTR_ERR(same); | |
| same = NULL; | |
| goto out; | |
| } | |
| same->dest_count = count; | |
| ret = vfs_dedupe_file_range(file, same); | |
| if (ret) | |
| goto out; | |
| ret = copy_to_user(argp, same, size); | |
| if (ret) | |
| ret = -EFAULT; | |
| out: | |
| kfree(same); | |
| return ret; | |
| } | |
| /* | |
| * When you add any new common ioctls to the switches above and below | |
| * please update compat_sys_ioctl() too. | |
| * | |
| * do_vfs_ioctl() is not for drivers and not intended to be EXPORT_SYMBOL()'d. | |
| * It's just a simple helper for sys_ioctl and compat_sys_ioctl. | |
| */ | |
| int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd, | |
| unsigned long arg) | |
| { | |
| int error = 0; | |
| int __user *argp = (int __user *)arg; | |
| struct inode *inode = file_inode(filp); | |
| switch (cmd) { | |
| case FIOCLEX: | |
| set_close_on_exec(fd, 1); | |
| break; | |
| case FIONCLEX: | |
| set_close_on_exec(fd, 0); | |
| break; | |
| case FIONBIO: | |
| error = ioctl_fionbio(filp, argp); | |
| break; | |
| case FIOASYNC: | |
| error = ioctl_fioasync(fd, filp, argp); | |
| break; | |
| case FIOQSIZE: | |
| if (S_ISDIR(inode->i_mode) || S_ISREG(inode->i_mode) || | |
| S_ISLNK(inode->i_mode)) { | |
| loff_t res = inode_get_bytes(inode); | |
| error = copy_to_user(argp, &res, sizeof(res)) ? | |
| -EFAULT : 0; | |
| } else | |
| error = -ENOTTY; | |
| break; | |
| case FIFREEZE: | |
| error = ioctl_fsfreeze(filp); | |
| break; | |
| case FITHAW: | |
| error = ioctl_fsthaw(filp); | |
| break; | |
| case FS_IOC_FIEMAP: | |
| return ioctl_fiemap(filp, arg); | |
| case FIGETBSZ: | |
| return put_user(inode->i_sb->s_blocksize, argp); | |
| case FICLONE: | |
| return ioctl_file_clone(filp, arg, 0, 0, 0); | |
| case FICLONERANGE: | |
| return ioctl_file_clone_range(filp, argp); | |
| case FIDEDUPERANGE: | |
| return ioctl_file_dedupe_range(filp, argp); | |
| default: | |
| if (S_ISREG(inode->i_mode)) | |
| error = file_ioctl(filp, cmd, arg); | |
| else | |
| error = vfs_ioctl(filp, cmd, arg); | |
| break; | |
| } | |
| return error; | |
| } | |
| int ksys_ioctl(unsigned int fd, unsigned int cmd, unsigned long arg) | |
| { | |
| int error; | |
| struct fd f = fdget(fd); | |
| if (!f.file) | |
| return -EBADF; | |
| error = security_file_ioctl(f.file, cmd, arg); | |
| if (!error) | |
| error = do_vfs_ioctl(f.file, fd, cmd, arg); | |
| fdput(f); | |
| return error; | |
| } | |
| SYSCALL_DEFINE3(ioctl, unsigned int, fd, unsigned int, cmd, unsigned long, arg) | |
| { | |
| return ksys_ioctl(fd, cmd, arg); | |
| } |