| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| USB Driver layer for GSM modems | |
| Copyright (C) 2005 Matthias Urlichs <smurf@smurf.noris.de> | |
| Portions copied from the Keyspan driver by Hugh Blemings <hugh@blemings.org> | |
| History: see the git log. | |
| Work sponsored by: Sigos GmbH, Germany <info@sigos.de> | |
| This driver exists because the "normal" serial driver doesn't work too well | |
| with GSM modems. Issues: | |
| - data loss -- one single Receive URB is not nearly enough | |
| - controlling the baud rate doesn't make sense | |
| */ | |
| #define DRIVER_AUTHOR "Matthias Urlichs <smurf@smurf.noris.de>" | |
| #define DRIVER_DESC "USB Driver for GSM modems" | |
| #include <linux/kernel.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/errno.h> | |
| #include <linux/slab.h> | |
| #include <linux/tty.h> | |
| #include <linux/tty_flip.h> | |
| #include <linux/module.h> | |
| #include <linux/bitops.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/usb.h> | |
| #include <linux/usb/serial.h> | |
| #include <linux/serial.h> | |
| #include "usb-wwan.h" | |
| /* | |
| * Generate DTR/RTS signals on the port using the SET_CONTROL_LINE_STATE request | |
| * in CDC ACM. | |
| */ | |
| static int usb_wwan_send_setup(struct usb_serial_port *port) | |
| { | |
| struct usb_serial *serial = port->serial; | |
| struct usb_wwan_port_private *portdata; | |
| int val = 0; | |
| int ifnum; | |
| int res; | |
| portdata = usb_get_serial_port_data(port); | |
| if (portdata->dtr_state) | |
| val |= 0x01; | |
| if (portdata->rts_state) | |
| val |= 0x02; | |
| ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber; | |
| res = usb_autopm_get_interface(serial->interface); | |
| if (res) | |
| return res; | |
| res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), | |
| 0x22, 0x21, val, ifnum, NULL, 0, | |
| USB_CTRL_SET_TIMEOUT); | |
| usb_autopm_put_interface(port->serial->interface); | |
| return res; | |
| } | |
| void usb_wwan_dtr_rts(struct usb_serial_port *port, int on) | |
| { | |
| struct usb_wwan_port_private *portdata; | |
| struct usb_wwan_intf_private *intfdata; | |
| intfdata = usb_get_serial_data(port->serial); | |
| if (!intfdata->use_send_setup) | |
| return; | |
| portdata = usb_get_serial_port_data(port); | |
| /* FIXME: locking */ | |
| portdata->rts_state = on; | |
| portdata->dtr_state = on; | |
| usb_wwan_send_setup(port); | |
| } | |
| EXPORT_SYMBOL(usb_wwan_dtr_rts); | |
| int usb_wwan_tiocmget(struct tty_struct *tty) | |
| { | |
| struct usb_serial_port *port = tty->driver_data; | |
| unsigned int value; | |
| struct usb_wwan_port_private *portdata; | |
| portdata = usb_get_serial_port_data(port); | |
| value = ((portdata->rts_state) ? TIOCM_RTS : 0) | | |
| ((portdata->dtr_state) ? TIOCM_DTR : 0) | | |
| ((portdata->cts_state) ? TIOCM_CTS : 0) | | |
| ((portdata->dsr_state) ? TIOCM_DSR : 0) | | |
| ((portdata->dcd_state) ? TIOCM_CAR : 0) | | |
| ((portdata->ri_state) ? TIOCM_RNG : 0); | |
| return value; | |
| } | |
| EXPORT_SYMBOL(usb_wwan_tiocmget); | |
| int usb_wwan_tiocmset(struct tty_struct *tty, | |
| unsigned int set, unsigned int clear) | |
| { | |
| struct usb_serial_port *port = tty->driver_data; | |
| struct usb_wwan_port_private *portdata; | |
| struct usb_wwan_intf_private *intfdata; | |
| portdata = usb_get_serial_port_data(port); | |
| intfdata = usb_get_serial_data(port->serial); | |
| if (!intfdata->use_send_setup) | |
| return -EINVAL; | |
| /* FIXME: what locks portdata fields ? */ | |
| if (set & TIOCM_RTS) | |
| portdata->rts_state = 1; | |
| if (set & TIOCM_DTR) | |
| portdata->dtr_state = 1; | |
| if (clear & TIOCM_RTS) | |
| portdata->rts_state = 0; | |
| if (clear & TIOCM_DTR) | |
| portdata->dtr_state = 0; | |
| return usb_wwan_send_setup(port); | |
| } | |
| EXPORT_SYMBOL(usb_wwan_tiocmset); | |
| static int get_serial_info(struct usb_serial_port *port, | |
| struct serial_struct __user *retinfo) | |
| { | |
| struct serial_struct tmp; | |
| memset(&tmp, 0, sizeof(tmp)); | |
| tmp.line = port->minor; | |
| tmp.port = port->port_number; | |
| tmp.baud_base = tty_get_baud_rate(port->port.tty); | |
| tmp.close_delay = port->port.close_delay / 10; | |
| tmp.closing_wait = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ? | |
| ASYNC_CLOSING_WAIT_NONE : | |
| port->port.closing_wait / 10; | |
| if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) | |
| return -EFAULT; | |
| return 0; | |
| } | |
| static int set_serial_info(struct usb_serial_port *port, | |
| struct serial_struct __user *newinfo) | |
| { | |
| struct serial_struct new_serial; | |
| unsigned int closing_wait, close_delay; | |
| int retval = 0; | |
| if (copy_from_user(&new_serial, newinfo, sizeof(new_serial))) | |
| return -EFAULT; | |
| close_delay = new_serial.close_delay * 10; | |
| closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? | |
| ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; | |
| mutex_lock(&port->port.mutex); | |
| if (!capable(CAP_SYS_ADMIN)) { | |
| if ((close_delay != port->port.close_delay) || | |
| (closing_wait != port->port.closing_wait)) | |
| retval = -EPERM; | |
| else | |
| retval = -EOPNOTSUPP; | |
| } else { | |
| port->port.close_delay = close_delay; | |
| port->port.closing_wait = closing_wait; | |
| } | |
| mutex_unlock(&port->port.mutex); | |
| return retval; | |
| } | |
| int usb_wwan_ioctl(struct tty_struct *tty, | |
| unsigned int cmd, unsigned long arg) | |
| { | |
| struct usb_serial_port *port = tty->driver_data; | |
| dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); | |
| switch (cmd) { | |
| case TIOCGSERIAL: | |
| return get_serial_info(port, | |
| (struct serial_struct __user *) arg); | |
| case TIOCSSERIAL: | |
| return set_serial_info(port, | |
| (struct serial_struct __user *) arg); | |
| default: | |
| break; | |
| } | |
| dev_dbg(&port->dev, "%s arg not supported\n", __func__); | |
| return -ENOIOCTLCMD; | |
| } | |
| EXPORT_SYMBOL(usb_wwan_ioctl); | |
| int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port, | |
| const unsigned char *buf, int count) | |
| { | |
| struct usb_wwan_port_private *portdata; | |
| struct usb_wwan_intf_private *intfdata; | |
| int i; | |
| int left, todo; | |
| struct urb *this_urb = NULL; /* spurious */ | |
| int err; | |
| unsigned long flags; | |
| portdata = usb_get_serial_port_data(port); | |
| intfdata = usb_get_serial_data(port->serial); | |
| dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count); | |
| i = 0; | |
| left = count; | |
| for (i = 0; left > 0 && i < N_OUT_URB; i++) { | |
| todo = left; | |
| if (todo > OUT_BUFLEN) | |
| todo = OUT_BUFLEN; | |
| this_urb = portdata->out_urbs[i]; | |
| if (test_and_set_bit(i, &portdata->out_busy)) { | |
| if (time_before(jiffies, | |
| portdata->tx_start_time[i] + 10 * HZ)) | |
| continue; | |
| usb_unlink_urb(this_urb); | |
| continue; | |
| } | |
| dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__, | |
| usb_pipeendpoint(this_urb->pipe), i); | |
| err = usb_autopm_get_interface_async(port->serial->interface); | |
| if (err < 0) { | |
| clear_bit(i, &portdata->out_busy); | |
| break; | |
| } | |
| /* send the data */ | |
| memcpy(this_urb->transfer_buffer, buf, todo); | |
| this_urb->transfer_buffer_length = todo; | |
| spin_lock_irqsave(&intfdata->susp_lock, flags); | |
| if (intfdata->suspended) { | |
| usb_anchor_urb(this_urb, &portdata->delayed); | |
| spin_unlock_irqrestore(&intfdata->susp_lock, flags); | |
| } else { | |
| intfdata->in_flight++; | |
| spin_unlock_irqrestore(&intfdata->susp_lock, flags); | |
| err = usb_submit_urb(this_urb, GFP_ATOMIC); | |
| if (err) { | |
| dev_err(&port->dev, | |
| "%s: submit urb %d failed: %d\n", | |
| __func__, i, err); | |
| clear_bit(i, &portdata->out_busy); | |
| spin_lock_irqsave(&intfdata->susp_lock, flags); | |
| intfdata->in_flight--; | |
| spin_unlock_irqrestore(&intfdata->susp_lock, | |
| flags); | |
| usb_autopm_put_interface_async(port->serial->interface); | |
| break; | |
| } | |
| } | |
| portdata->tx_start_time[i] = jiffies; | |
| buf += todo; | |
| left -= todo; | |
| } | |
| count -= left; | |
| dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count); | |
| return count; | |
| } | |
| EXPORT_SYMBOL(usb_wwan_write); | |
| static void usb_wwan_indat_callback(struct urb *urb) | |
| { | |
| int err; | |
| int endpoint; | |
| struct usb_serial_port *port; | |
| struct device *dev; | |
| unsigned char *data = urb->transfer_buffer; | |
| int status = urb->status; | |
| endpoint = usb_pipeendpoint(urb->pipe); | |
| port = urb->context; | |
| dev = &port->dev; | |
| if (status) { | |
| dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n", | |
| __func__, status, endpoint); | |
| } else { | |
| if (urb->actual_length) { | |
| tty_insert_flip_string(&port->port, data, | |
| urb->actual_length); | |
| tty_flip_buffer_push(&port->port); | |
| } else | |
| dev_dbg(dev, "%s: empty read urb received\n", __func__); | |
| } | |
| /* Resubmit urb so we continue receiving */ | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err) { | |
| if (err != -EPERM && err != -ENODEV) { | |
| dev_err(dev, "%s: resubmit read urb failed. (%d)\n", | |
| __func__, err); | |
| /* busy also in error unless we are killed */ | |
| usb_mark_last_busy(port->serial->dev); | |
| } | |
| } else { | |
| usb_mark_last_busy(port->serial->dev); | |
| } | |
| } | |
| static void usb_wwan_outdat_callback(struct urb *urb) | |
| { | |
| struct usb_serial_port *port; | |
| struct usb_wwan_port_private *portdata; | |
| struct usb_wwan_intf_private *intfdata; | |
| int i; | |
| port = urb->context; | |
| intfdata = usb_get_serial_data(port->serial); | |
| usb_serial_port_softint(port); | |
| usb_autopm_put_interface_async(port->serial->interface); | |
| portdata = usb_get_serial_port_data(port); | |
| spin_lock(&intfdata->susp_lock); | |
| intfdata->in_flight--; | |
| spin_unlock(&intfdata->susp_lock); | |
| for (i = 0; i < N_OUT_URB; ++i) { | |
| if (portdata->out_urbs[i] == urb) { | |
| smp_mb__before_atomic(); | |
| clear_bit(i, &portdata->out_busy); | |
| break; | |
| } | |
| } | |
| } | |
| int usb_wwan_write_room(struct tty_struct *tty) | |
| { | |
| struct usb_serial_port *port = tty->driver_data; | |
| struct usb_wwan_port_private *portdata; | |
| int i; | |
| int data_len = 0; | |
| struct urb *this_urb; | |
| portdata = usb_get_serial_port_data(port); | |
| for (i = 0; i < N_OUT_URB; i++) { | |
| this_urb = portdata->out_urbs[i]; | |
| if (this_urb && !test_bit(i, &portdata->out_busy)) | |
| data_len += OUT_BUFLEN; | |
| } | |
| dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); | |
| return data_len; | |
| } | |
| EXPORT_SYMBOL(usb_wwan_write_room); | |
| int usb_wwan_chars_in_buffer(struct tty_struct *tty) | |
| { | |
| struct usb_serial_port *port = tty->driver_data; | |
| struct usb_wwan_port_private *portdata; | |
| int i; | |
| int data_len = 0; | |
| struct urb *this_urb; | |
| portdata = usb_get_serial_port_data(port); | |
| for (i = 0; i < N_OUT_URB; i++) { | |
| this_urb = portdata->out_urbs[i]; | |
| /* FIXME: This locking is insufficient as this_urb may | |
| go unused during the test */ | |
| if (this_urb && test_bit(i, &portdata->out_busy)) | |
| data_len += this_urb->transfer_buffer_length; | |
| } | |
| dev_dbg(&port->dev, "%s: %d\n", __func__, data_len); | |
| return data_len; | |
| } | |
| EXPORT_SYMBOL(usb_wwan_chars_in_buffer); | |
| int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port) | |
| { | |
| struct usb_wwan_port_private *portdata; | |
| struct usb_wwan_intf_private *intfdata; | |
| struct usb_serial *serial = port->serial; | |
| int i, err; | |
| struct urb *urb; | |
| portdata = usb_get_serial_port_data(port); | |
| intfdata = usb_get_serial_data(serial); | |
| if (port->interrupt_in_urb) { | |
| err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); | |
| if (err) { | |
| dev_err(&port->dev, "%s: submit int urb failed: %d\n", | |
| __func__, err); | |
| } | |
| } | |
| /* Start reading from the IN endpoint */ | |
| for (i = 0; i < N_IN_URB; i++) { | |
| urb = portdata->in_urbs[i]; | |
| if (!urb) | |
| continue; | |
| err = usb_submit_urb(urb, GFP_KERNEL); | |
| if (err) { | |
| dev_err(&port->dev, | |
| "%s: submit read urb %d failed: %d\n", | |
| __func__, i, err); | |
| } | |
| } | |
| spin_lock_irq(&intfdata->susp_lock); | |
| if (++intfdata->open_ports == 1) | |
| serial->interface->needs_remote_wakeup = 1; | |
| spin_unlock_irq(&intfdata->susp_lock); | |
| /* this balances a get in the generic USB serial code */ | |
| usb_autopm_put_interface(serial->interface); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(usb_wwan_open); | |
| static void unbusy_queued_urb(struct urb *urb, | |
| struct usb_wwan_port_private *portdata) | |
| { | |
| int i; | |
| for (i = 0; i < N_OUT_URB; i++) { | |
| if (urb == portdata->out_urbs[i]) { | |
| clear_bit(i, &portdata->out_busy); | |
| break; | |
| } | |
| } | |
| } | |
| void usb_wwan_close(struct usb_serial_port *port) | |
| { | |
| int i; | |
| struct usb_serial *serial = port->serial; | |
| struct usb_wwan_port_private *portdata; | |
| struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); | |
| struct urb *urb; | |
| portdata = usb_get_serial_port_data(port); | |
| /* | |
| * Need to take susp_lock to make sure port is not already being | |
| * resumed, but no need to hold it due to initialized | |
| */ | |
| spin_lock_irq(&intfdata->susp_lock); | |
| if (--intfdata->open_ports == 0) | |
| serial->interface->needs_remote_wakeup = 0; | |
| spin_unlock_irq(&intfdata->susp_lock); | |
| for (;;) { | |
| urb = usb_get_from_anchor(&portdata->delayed); | |
| if (!urb) | |
| break; | |
| unbusy_queued_urb(urb, portdata); | |
| usb_autopm_put_interface_async(serial->interface); | |
| } | |
| for (i = 0; i < N_IN_URB; i++) | |
| usb_kill_urb(portdata->in_urbs[i]); | |
| for (i = 0; i < N_OUT_URB; i++) | |
| usb_kill_urb(portdata->out_urbs[i]); | |
| usb_kill_urb(port->interrupt_in_urb); | |
| usb_autopm_get_interface_no_resume(serial->interface); | |
| } | |
| EXPORT_SYMBOL(usb_wwan_close); | |
| static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port, | |
| int endpoint, | |
| int dir, void *ctx, char *buf, int len, | |
| void (*callback) (struct urb *)) | |
| { | |
| struct usb_serial *serial = port->serial; | |
| struct urb *urb; | |
| urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */ | |
| if (!urb) | |
| return NULL; | |
| usb_fill_bulk_urb(urb, serial->dev, | |
| usb_sndbulkpipe(serial->dev, endpoint) | dir, | |
| buf, len, callback, ctx); | |
| return urb; | |
| } | |
| int usb_wwan_port_probe(struct usb_serial_port *port) | |
| { | |
| struct usb_wwan_port_private *portdata; | |
| struct urb *urb; | |
| u8 *buffer; | |
| int i; | |
| if (!port->bulk_in_size || !port->bulk_out_size) | |
| return -ENODEV; | |
| portdata = kzalloc(sizeof(*portdata), GFP_KERNEL); | |
| if (!portdata) | |
| return -ENOMEM; | |
| init_usb_anchor(&portdata->delayed); | |
| for (i = 0; i < N_IN_URB; i++) { | |
| buffer = (u8 *)__get_free_page(GFP_KERNEL); | |
| if (!buffer) | |
| goto bail_out_error; | |
| portdata->in_buffer[i] = buffer; | |
| urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress, | |
| USB_DIR_IN, port, | |
| buffer, IN_BUFLEN, | |
| usb_wwan_indat_callback); | |
| portdata->in_urbs[i] = urb; | |
| } | |
| for (i = 0; i < N_OUT_URB; i++) { | |
| buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL); | |
| if (!buffer) | |
| goto bail_out_error2; | |
| portdata->out_buffer[i] = buffer; | |
| urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress, | |
| USB_DIR_OUT, port, | |
| buffer, OUT_BUFLEN, | |
| usb_wwan_outdat_callback); | |
| portdata->out_urbs[i] = urb; | |
| } | |
| usb_set_serial_port_data(port, portdata); | |
| return 0; | |
| bail_out_error2: | |
| for (i = 0; i < N_OUT_URB; i++) { | |
| usb_free_urb(portdata->out_urbs[i]); | |
| kfree(portdata->out_buffer[i]); | |
| } | |
| bail_out_error: | |
| for (i = 0; i < N_IN_URB; i++) { | |
| usb_free_urb(portdata->in_urbs[i]); | |
| free_page((unsigned long)portdata->in_buffer[i]); | |
| } | |
| kfree(portdata); | |
| return -ENOMEM; | |
| } | |
| EXPORT_SYMBOL_GPL(usb_wwan_port_probe); | |
| int usb_wwan_port_remove(struct usb_serial_port *port) | |
| { | |
| int i; | |
| struct usb_wwan_port_private *portdata; | |
| portdata = usb_get_serial_port_data(port); | |
| usb_set_serial_port_data(port, NULL); | |
| for (i = 0; i < N_IN_URB; i++) { | |
| usb_free_urb(portdata->in_urbs[i]); | |
| free_page((unsigned long)portdata->in_buffer[i]); | |
| } | |
| for (i = 0; i < N_OUT_URB; i++) { | |
| usb_free_urb(portdata->out_urbs[i]); | |
| kfree(portdata->out_buffer[i]); | |
| } | |
| kfree(portdata); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(usb_wwan_port_remove); | |
| #ifdef CONFIG_PM | |
| static void stop_urbs(struct usb_serial *serial) | |
| { | |
| int i, j; | |
| struct usb_serial_port *port; | |
| struct usb_wwan_port_private *portdata; | |
| for (i = 0; i < serial->num_ports; ++i) { | |
| port = serial->port[i]; | |
| portdata = usb_get_serial_port_data(port); | |
| if (!portdata) | |
| continue; | |
| for (j = 0; j < N_IN_URB; j++) | |
| usb_kill_urb(portdata->in_urbs[j]); | |
| for (j = 0; j < N_OUT_URB; j++) | |
| usb_kill_urb(portdata->out_urbs[j]); | |
| usb_kill_urb(port->interrupt_in_urb); | |
| } | |
| } | |
| int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message) | |
| { | |
| struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); | |
| spin_lock_irq(&intfdata->susp_lock); | |
| if (PMSG_IS_AUTO(message)) { | |
| if (intfdata->in_flight) { | |
| spin_unlock_irq(&intfdata->susp_lock); | |
| return -EBUSY; | |
| } | |
| } | |
| intfdata->suspended = 1; | |
| spin_unlock_irq(&intfdata->susp_lock); | |
| stop_urbs(serial); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(usb_wwan_suspend); | |
| /* Caller must hold susp_lock. */ | |
| static int usb_wwan_submit_delayed_urbs(struct usb_serial_port *port) | |
| { | |
| struct usb_serial *serial = port->serial; | |
| struct usb_wwan_intf_private *data = usb_get_serial_data(serial); | |
| struct usb_wwan_port_private *portdata; | |
| struct urb *urb; | |
| int err_count = 0; | |
| int err; | |
| portdata = usb_get_serial_port_data(port); | |
| for (;;) { | |
| urb = usb_get_from_anchor(&portdata->delayed); | |
| if (!urb) | |
| break; | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err) { | |
| dev_err(&port->dev, "%s: submit urb failed: %d\n", | |
| __func__, err); | |
| err_count++; | |
| unbusy_queued_urb(urb, portdata); | |
| usb_autopm_put_interface_async(serial->interface); | |
| continue; | |
| } | |
| data->in_flight++; | |
| } | |
| if (err_count) | |
| return -EIO; | |
| return 0; | |
| } | |
| int usb_wwan_resume(struct usb_serial *serial) | |
| { | |
| int i, j; | |
| struct usb_serial_port *port; | |
| struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial); | |
| struct usb_wwan_port_private *portdata; | |
| struct urb *urb; | |
| int err; | |
| int err_count = 0; | |
| spin_lock_irq(&intfdata->susp_lock); | |
| for (i = 0; i < serial->num_ports; i++) { | |
| port = serial->port[i]; | |
| if (!tty_port_initialized(&port->port)) | |
| continue; | |
| portdata = usb_get_serial_port_data(port); | |
| if (port->interrupt_in_urb) { | |
| err = usb_submit_urb(port->interrupt_in_urb, | |
| GFP_ATOMIC); | |
| if (err) { | |
| dev_err(&port->dev, | |
| "%s: submit int urb failed: %d\n", | |
| __func__, err); | |
| err_count++; | |
| } | |
| } | |
| err = usb_wwan_submit_delayed_urbs(port); | |
| if (err) | |
| err_count++; | |
| for (j = 0; j < N_IN_URB; j++) { | |
| urb = portdata->in_urbs[j]; | |
| err = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (err < 0) { | |
| dev_err(&port->dev, | |
| "%s: submit read urb %d failed: %d\n", | |
| __func__, i, err); | |
| err_count++; | |
| } | |
| } | |
| } | |
| intfdata->suspended = 0; | |
| spin_unlock_irq(&intfdata->susp_lock); | |
| if (err_count) | |
| return -EIO; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(usb_wwan_resume); | |
| #endif | |
| MODULE_AUTHOR(DRIVER_AUTHOR); | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_LICENSE("GPL v2"); |