| /* SPDX-License-Identifier: GPL-2.0 */ | |
| #include <asm/asm-offsets.h> | |
| #include <asm/thread_info.h> | |
| #define PAGE_SIZE _PAGE_SIZE | |
| /* | |
| * Put .bss..swapper_pg_dir as the first thing in .bss. This will | |
| * ensure that it has .bss alignment (64K). | |
| */ | |
| #define BSS_FIRST_SECTIONS *(.bss..swapper_pg_dir) | |
| #include <asm-generic/vmlinux.lds.h> | |
| #undef mips | |
| #define mips mips | |
| OUTPUT_ARCH(mips) | |
| ENTRY(kernel_entry) | |
| PHDRS { | |
| text PT_LOAD FLAGS(7); /* RWX */ | |
| #ifndef CONFIG_CAVIUM_OCTEON_SOC | |
| note PT_NOTE FLAGS(4); /* R__ */ | |
| #endif /* CAVIUM_OCTEON_SOC */ | |
| } | |
| #ifdef CONFIG_32BIT | |
| #ifdef CONFIG_CPU_LITTLE_ENDIAN | |
| jiffies = jiffies_64; | |
| #else | |
| jiffies = jiffies_64 + 4; | |
| #endif | |
| #else | |
| jiffies = jiffies_64; | |
| #endif | |
| SECTIONS | |
| { | |
| #ifdef CONFIG_BOOT_ELF64 | |
| /* Read-only sections, merged into text segment: */ | |
| /* . = 0xc000000000000000; */ | |
| /* This is the value for an Origin kernel, taken from an IRIX kernel. */ | |
| /* . = 0xc00000000001c000; */ | |
| /* Set the vaddr for the text segment to a value | |
| * >= 0xa800 0000 0001 9000 if no symmon is going to configured | |
| * >= 0xa800 0000 0030 0000 otherwise | |
| */ | |
| /* . = 0xa800000000300000; */ | |
| . = 0xffffffff80300000; | |
| #endif | |
| . = VMLINUX_LOAD_ADDRESS; | |
| /* read-only */ | |
| _text = .; /* Text and read-only data */ | |
| .text : { | |
| TEXT_TEXT | |
| SCHED_TEXT | |
| CPUIDLE_TEXT | |
| LOCK_TEXT | |
| KPROBES_TEXT | |
| IRQENTRY_TEXT | |
| SOFTIRQENTRY_TEXT | |
| *(.text.*) | |
| *(.fixup) | |
| *(.gnu.warning) | |
| } :text = 0 | |
| _etext = .; /* End of text section */ | |
| EXCEPTION_TABLE(16) | |
| /* Exception table for data bus errors */ | |
| __dbe_table : { | |
| __start___dbe_table = .; | |
| *(__dbe_table) | |
| __stop___dbe_table = .; | |
| } | |
| #ifdef CONFIG_CAVIUM_OCTEON_SOC | |
| #define NOTES_HEADER | |
| #else /* CONFIG_CAVIUM_OCTEON_SOC */ | |
| #define NOTES_HEADER :note | |
| #endif /* CONFIG_CAVIUM_OCTEON_SOC */ | |
| NOTES :text NOTES_HEADER | |
| .dummy : { *(.dummy) } :text | |
| _sdata = .; /* Start of data section */ | |
| RODATA | |
| /* writeable */ | |
| .data : { /* Data */ | |
| . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ | |
| INIT_TASK_DATA(THREAD_SIZE) | |
| NOSAVE_DATA | |
| CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) | |
| READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) | |
| DATA_DATA | |
| CONSTRUCTORS | |
| } | |
| BUG_TABLE | |
| _gp = . + 0x8000; | |
| .lit8 : { | |
| *(.lit8) | |
| } | |
| .lit4 : { | |
| *(.lit4) | |
| } | |
| /* We want the small data sections together, so single-instruction offsets | |
| can access them all, and initialized data all before uninitialized, so | |
| we can shorten the on-disk segment size. */ | |
| .sdata : { | |
| *(.sdata) | |
| } | |
| _edata = .; /* End of data section */ | |
| /* will be freed after init */ | |
| . = ALIGN(PAGE_SIZE); /* Init code and data */ | |
| __init_begin = .; | |
| INIT_TEXT_SECTION(PAGE_SIZE) | |
| INIT_DATA_SECTION(16) | |
| . = ALIGN(4); | |
| .mips.machines.init : AT(ADDR(.mips.machines.init) - LOAD_OFFSET) { | |
| __mips_machines_start = .; | |
| *(.mips.machines.init) | |
| __mips_machines_end = .; | |
| } | |
| /* .exit.text is discarded at runtime, not link time, to deal with | |
| * references from .rodata | |
| */ | |
| .exit.text : { | |
| EXIT_TEXT | |
| } | |
| .exit.data : { | |
| EXIT_DATA | |
| } | |
| #ifdef CONFIG_SMP | |
| PERCPU_SECTION(1 << CONFIG_MIPS_L1_CACHE_SHIFT) | |
| #endif | |
| #ifdef CONFIG_RELOCATABLE | |
| . = ALIGN(4); | |
| .data.reloc : { | |
| _relocation_start = .; | |
| /* | |
| * Space for relocation table | |
| * This needs to be filled so that the | |
| * relocs tool can overwrite the content. | |
| * An invalid value is left at the start of the | |
| * section to abort relocation if the table | |
| * has not been filled in. | |
| */ | |
| LONG(0xFFFFFFFF); | |
| FILL(0); | |
| . += CONFIG_RELOCATION_TABLE_SIZE - 4; | |
| _relocation_end = .; | |
| } | |
| #endif | |
| #ifdef CONFIG_MIPS_RAW_APPENDED_DTB | |
| __appended_dtb = .; | |
| /* leave space for appended DTB */ | |
| . += 0x100000; | |
| #elif defined(CONFIG_MIPS_ELF_APPENDED_DTB) | |
| .appended_dtb : AT(ADDR(.appended_dtb) - LOAD_OFFSET) { | |
| *(.appended_dtb) | |
| KEEP(*(.appended_dtb)) | |
| } | |
| #endif | |
| /* | |
| * Align to 64K in attempt to eliminate holes before the | |
| * .bss..swapper_pg_dir section at the start of .bss. This | |
| * also satisfies PAGE_SIZE alignment as the largest page size | |
| * allowed is 64K. | |
| */ | |
| . = ALIGN(0x10000); | |
| __init_end = .; | |
| /* freed after init ends here */ | |
| /* | |
| * Force .bss to 64K alignment so that .bss..swapper_pg_dir | |
| * gets that alignment. .sbss should be empty, so there will be | |
| * no holes after __init_end. */ | |
| BSS_SECTION(0, 0x10000, 8) | |
| _end = . ; | |
| /* These mark the ABI of the kernel for debuggers. */ | |
| .mdebug.abi32 : { | |
| KEEP(*(.mdebug.abi32)) | |
| } | |
| .mdebug.abi64 : { | |
| KEEP(*(.mdebug.abi64)) | |
| } | |
| /* This is the MIPS specific mdebug section. */ | |
| .mdebug : { | |
| *(.mdebug) | |
| } | |
| STABS_DEBUG | |
| DWARF_DEBUG | |
| /* These must appear regardless of . */ | |
| .gptab.sdata : { | |
| *(.gptab.data) | |
| *(.gptab.sdata) | |
| } | |
| .gptab.sbss : { | |
| *(.gptab.bss) | |
| *(.gptab.sbss) | |
| } | |
| /* Sections to be discarded */ | |
| DISCARDS | |
| /DISCARD/ : { | |
| /* ABI crap starts here */ | |
| *(.MIPS.abiflags) | |
| *(.MIPS.options) | |
| *(.options) | |
| *(.pdr) | |
| *(.reginfo) | |
| *(.eh_frame) | |
| } | |
| } |