| /****************************************************************************** | 
 |  * | 
 |  * GPL LICENSE SUMMARY | 
 |  * | 
 |  * Copyright(c) 2008 - 2009 Intel Corporation. All rights reserved. | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of version 2 of the GNU General Public License as | 
 |  * published by the Free Software Foundation. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, but | 
 |  * WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU | 
 |  * General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, write to the Free Software | 
 |  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, | 
 |  * USA | 
 |  * | 
 |  * The full GNU General Public License is included in this distribution | 
 |  * in the file called LICENSE.GPL. | 
 |  * | 
 |  * Contact Information: | 
 |  *  Intel Linux Wireless <ilw@linux.intel.com> | 
 |  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 | 
 |  *****************************************************************************/ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/module.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <net/mac80211.h> | 
 |  | 
 | #include "iwl-eeprom.h" | 
 | #include "iwl-dev.h" /* FIXME: remove */ | 
 | #include "iwl-debug.h" | 
 | #include "iwl-core.h" | 
 | #include "iwl-io.h" | 
 | #include "iwl-power.h" | 
 | #include "iwl-sta.h" | 
 | #include "iwl-helpers.h" | 
 |  | 
 |  | 
 | MODULE_DESCRIPTION("iwl core"); | 
 | MODULE_VERSION(IWLWIFI_VERSION); | 
 | MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np)    \ | 
 | 	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,      \ | 
 | 				    IWL_RATE_SISO_##s##M_PLCP, \ | 
 | 				    IWL_RATE_MIMO2_##s##M_PLCP,\ | 
 | 				    IWL_RATE_MIMO3_##s##M_PLCP,\ | 
 | 				    IWL_RATE_##r##M_IEEE,      \ | 
 | 				    IWL_RATE_##ip##M_INDEX,    \ | 
 | 				    IWL_RATE_##in##M_INDEX,    \ | 
 | 				    IWL_RATE_##rp##M_INDEX,    \ | 
 | 				    IWL_RATE_##rn##M_INDEX,    \ | 
 | 				    IWL_RATE_##pp##M_INDEX,    \ | 
 | 				    IWL_RATE_##np##M_INDEX } | 
 |  | 
 | u32 iwl_debug_level; | 
 | EXPORT_SYMBOL(iwl_debug_level); | 
 |  | 
 | static irqreturn_t iwl_isr(int irq, void *data); | 
 |  | 
 | /* | 
 |  * Parameter order: | 
 |  *   rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate | 
 |  * | 
 |  * If there isn't a valid next or previous rate then INV is used which | 
 |  * maps to IWL_RATE_INVALID | 
 |  * | 
 |  */ | 
 | const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = { | 
 | 	IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2),    /*  1mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5),          /*  2mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11),        /*5.5mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18),      /* 11mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11),        /*  6mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11),       /*  9mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18),   /* 12mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24),   /* 18mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36),   /* 24mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48),   /* 36mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54),   /* 48mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */ | 
 | 	IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */ | 
 | 	/* FIXME:RS:          ^^    should be INV (legacy) */ | 
 | }; | 
 | EXPORT_SYMBOL(iwl_rates); | 
 |  | 
 | /** | 
 |  * translate ucode response to mac80211 tx status control values | 
 |  */ | 
 | void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags, | 
 | 				  struct ieee80211_tx_info *info) | 
 | { | 
 | 	struct ieee80211_tx_rate *r = &info->control.rates[0]; | 
 |  | 
 | 	info->antenna_sel_tx = | 
 | 		((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); | 
 | 	if (rate_n_flags & RATE_MCS_HT_MSK) | 
 | 		r->flags |= IEEE80211_TX_RC_MCS; | 
 | 	if (rate_n_flags & RATE_MCS_GF_MSK) | 
 | 		r->flags |= IEEE80211_TX_RC_GREEN_FIELD; | 
 | 	if (rate_n_flags & RATE_MCS_HT40_MSK) | 
 | 		r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | 
 | 	if (rate_n_flags & RATE_MCS_DUP_MSK) | 
 | 		r->flags |= IEEE80211_TX_RC_DUP_DATA; | 
 | 	if (rate_n_flags & RATE_MCS_SGI_MSK) | 
 | 		r->flags |= IEEE80211_TX_RC_SHORT_GI; | 
 | 	r->idx = iwl_hwrate_to_mac80211_idx(rate_n_flags, info->band); | 
 | } | 
 | EXPORT_SYMBOL(iwl_hwrate_to_tx_control); | 
 |  | 
 | int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) | 
 | { | 
 | 	int idx = 0; | 
 |  | 
 | 	/* HT rate format */ | 
 | 	if (rate_n_flags & RATE_MCS_HT_MSK) { | 
 | 		idx = (rate_n_flags & 0xff); | 
 |  | 
 | 		if (idx >= IWL_RATE_MIMO3_6M_PLCP) | 
 | 			idx = idx - IWL_RATE_MIMO3_6M_PLCP; | 
 | 		else if (idx >= IWL_RATE_MIMO2_6M_PLCP) | 
 | 			idx = idx - IWL_RATE_MIMO2_6M_PLCP; | 
 |  | 
 | 		idx += IWL_FIRST_OFDM_RATE; | 
 | 		/* skip 9M not supported in ht*/ | 
 | 		if (idx >= IWL_RATE_9M_INDEX) | 
 | 			idx += 1; | 
 | 		if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE)) | 
 | 			return idx; | 
 |  | 
 | 	/* legacy rate format, search for match in table */ | 
 | 	} else { | 
 | 		for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) | 
 | 			if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) | 
 | 				return idx; | 
 | 	} | 
 |  | 
 | 	return -1; | 
 | } | 
 | EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx); | 
 |  | 
 | int iwl_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band) | 
 | { | 
 | 	int idx = 0; | 
 | 	int band_offset = 0; | 
 |  | 
 | 	/* HT rate format: mac80211 wants an MCS number, which is just LSB */ | 
 | 	if (rate_n_flags & RATE_MCS_HT_MSK) { | 
 | 		idx = (rate_n_flags & 0xff); | 
 | 		return idx; | 
 | 	/* Legacy rate format, search for match in table */ | 
 | 	} else { | 
 | 		if (band == IEEE80211_BAND_5GHZ) | 
 | 			band_offset = IWL_FIRST_OFDM_RATE; | 
 | 		for (idx = band_offset; idx < IWL_RATE_COUNT_LEGACY; idx++) | 
 | 			if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF)) | 
 | 				return idx - band_offset; | 
 | 	} | 
 |  | 
 | 	return -1; | 
 | } | 
 |  | 
 | u8 iwl_toggle_tx_ant(struct iwl_priv *priv, u8 ant) | 
 | { | 
 | 	int i; | 
 | 	u8 ind = ant; | 
 | 	for (i = 0; i < RATE_ANT_NUM - 1; i++) { | 
 | 		ind = (ind + 1) < RATE_ANT_NUM ?  ind + 1 : 0; | 
 | 		if (priv->hw_params.valid_tx_ant & BIT(ind)) | 
 | 			return ind; | 
 | 	} | 
 | 	return ant; | 
 | } | 
 |  | 
 | const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }; | 
 | EXPORT_SYMBOL(iwl_bcast_addr); | 
 |  | 
 |  | 
 | /* This function both allocates and initializes hw and priv. */ | 
 | struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg, | 
 | 		struct ieee80211_ops *hw_ops) | 
 | { | 
 | 	struct iwl_priv *priv; | 
 |  | 
 | 	/* mac80211 allocates memory for this device instance, including | 
 | 	 *   space for this driver's private structure */ | 
 | 	struct ieee80211_hw *hw = | 
 | 		ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops); | 
 | 	if (hw == NULL) { | 
 | 		printk(KERN_ERR "%s: Can not allocate network device\n", | 
 | 		       cfg->name); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	priv = hw->priv; | 
 | 	priv->hw = hw; | 
 |  | 
 | out: | 
 | 	return hw; | 
 | } | 
 | EXPORT_SYMBOL(iwl_alloc_all); | 
 |  | 
 | void iwl_hw_detect(struct iwl_priv *priv) | 
 | { | 
 | 	priv->hw_rev = _iwl_read32(priv, CSR_HW_REV); | 
 | 	priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG); | 
 | 	pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id); | 
 | } | 
 | EXPORT_SYMBOL(iwl_hw_detect); | 
 |  | 
 | int iwl_hw_nic_init(struct iwl_priv *priv) | 
 | { | 
 | 	unsigned long flags; | 
 | 	struct iwl_rx_queue *rxq = &priv->rxq; | 
 | 	int ret; | 
 |  | 
 | 	/* nic_init */ | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 | 	priv->cfg->ops->lib->apm_ops.init(priv); | 
 | 	iwl_write32(priv, CSR_INT_COALESCING, 512 / 32); | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 |  | 
 | 	ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN); | 
 |  | 
 | 	priv->cfg->ops->lib->apm_ops.config(priv); | 
 |  | 
 | 	/* Allocate the RX queue, or reset if it is already allocated */ | 
 | 	if (!rxq->bd) { | 
 | 		ret = iwl_rx_queue_alloc(priv); | 
 | 		if (ret) { | 
 | 			IWL_ERR(priv, "Unable to initialize Rx queue\n"); | 
 | 			return -ENOMEM; | 
 | 		} | 
 | 	} else | 
 | 		iwl_rx_queue_reset(priv, rxq); | 
 |  | 
 | 	iwl_rx_replenish(priv); | 
 |  | 
 | 	iwl_rx_init(priv, rxq); | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 |  | 
 | 	rxq->need_update = 1; | 
 | 	iwl_rx_queue_update_write_ptr(priv, rxq); | 
 |  | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 |  | 
 | 	/* Allocate and init all Tx and Command queues */ | 
 | 	ret = iwl_txq_ctx_reset(priv); | 
 | 	if (ret) | 
 | 		return ret; | 
 |  | 
 | 	set_bit(STATUS_INIT, &priv->status); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_hw_nic_init); | 
 |  | 
 | /* | 
 |  * QoS  support | 
 | */ | 
 | void iwl_activate_qos(struct iwl_priv *priv, u8 force) | 
 | { | 
 | 	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) | 
 | 		return; | 
 |  | 
 | 	priv->qos_data.def_qos_parm.qos_flags = 0; | 
 |  | 
 | 	if (priv->qos_data.qos_cap.q_AP.queue_request && | 
 | 	    !priv->qos_data.qos_cap.q_AP.txop_request) | 
 | 		priv->qos_data.def_qos_parm.qos_flags |= | 
 | 			QOS_PARAM_FLG_TXOP_TYPE_MSK; | 
 | 	if (priv->qos_data.qos_active) | 
 | 		priv->qos_data.def_qos_parm.qos_flags |= | 
 | 			QOS_PARAM_FLG_UPDATE_EDCA_MSK; | 
 |  | 
 | 	if (priv->current_ht_config.is_ht) | 
 | 		priv->qos_data.def_qos_parm.qos_flags |= QOS_PARAM_FLG_TGN_MSK; | 
 |  | 
 | 	if (force || iwl_is_associated(priv)) { | 
 | 		IWL_DEBUG_QOS(priv, "send QoS cmd with Qos active=%d FLAGS=0x%X\n", | 
 | 				priv->qos_data.qos_active, | 
 | 				priv->qos_data.def_qos_parm.qos_flags); | 
 |  | 
 | 		iwl_send_cmd_pdu_async(priv, REPLY_QOS_PARAM, | 
 | 				       sizeof(struct iwl_qosparam_cmd), | 
 | 				       &priv->qos_data.def_qos_parm, NULL); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(iwl_activate_qos); | 
 |  | 
 | /* | 
 |  * AC        CWmin         CW max      AIFSN      TXOP Limit    TXOP Limit | 
 |  *                                              (802.11b)      (802.11a/g) | 
 |  * AC_BK      15            1023        7           0               0 | 
 |  * AC_BE      15            1023        3           0               0 | 
 |  * AC_VI       7              15        2          6.016ms       3.008ms | 
 |  * AC_VO       3               7        2          3.264ms       1.504ms | 
 |  */ | 
 | void iwl_reset_qos(struct iwl_priv *priv) | 
 | { | 
 | 	u16 cw_min = 15; | 
 | 	u16 cw_max = 1023; | 
 | 	u8 aifs = 2; | 
 | 	bool is_legacy = false; | 
 | 	unsigned long flags; | 
 | 	int i; | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 | 	/* QoS always active in AP and ADHOC mode | 
 | 	 * In STA mode wait for association | 
 | 	 */ | 
 | 	if (priv->iw_mode == NL80211_IFTYPE_ADHOC || | 
 | 	    priv->iw_mode == NL80211_IFTYPE_AP) | 
 | 		priv->qos_data.qos_active = 1; | 
 | 	else | 
 | 		priv->qos_data.qos_active = 0; | 
 |  | 
 | 	/* check for legacy mode */ | 
 | 	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC && | 
 | 	    (priv->active_rate & IWL_OFDM_RATES_MASK) == 0) || | 
 | 	    (priv->iw_mode == NL80211_IFTYPE_STATION && | 
 | 	    (priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK) == 0)) { | 
 | 		cw_min = 31; | 
 | 		is_legacy = 1; | 
 | 	} | 
 |  | 
 | 	if (priv->qos_data.qos_active) | 
 | 		aifs = 3; | 
 |  | 
 | 	/* AC_BE */ | 
 | 	priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min); | 
 | 	priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max); | 
 | 	priv->qos_data.def_qos_parm.ac[0].aifsn = aifs; | 
 | 	priv->qos_data.def_qos_parm.ac[0].edca_txop = 0; | 
 | 	priv->qos_data.def_qos_parm.ac[0].reserved1 = 0; | 
 |  | 
 | 	if (priv->qos_data.qos_active) { | 
 | 		/* AC_BK */ | 
 | 		i = 1; | 
 | 		priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min); | 
 | 		priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max); | 
 | 		priv->qos_data.def_qos_parm.ac[i].aifsn = 7; | 
 | 		priv->qos_data.def_qos_parm.ac[i].edca_txop = 0; | 
 | 		priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; | 
 |  | 
 | 		/* AC_VI */ | 
 | 		i = 2; | 
 | 		priv->qos_data.def_qos_parm.ac[i].cw_min = | 
 | 			cpu_to_le16((cw_min + 1) / 2 - 1); | 
 | 		priv->qos_data.def_qos_parm.ac[i].cw_max = | 
 | 			cpu_to_le16(cw_min); | 
 | 		priv->qos_data.def_qos_parm.ac[i].aifsn = 2; | 
 | 		if (is_legacy) | 
 | 			priv->qos_data.def_qos_parm.ac[i].edca_txop = | 
 | 				cpu_to_le16(6016); | 
 | 		else | 
 | 			priv->qos_data.def_qos_parm.ac[i].edca_txop = | 
 | 				cpu_to_le16(3008); | 
 | 		priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; | 
 |  | 
 | 		/* AC_VO */ | 
 | 		i = 3; | 
 | 		priv->qos_data.def_qos_parm.ac[i].cw_min = | 
 | 			cpu_to_le16((cw_min + 1) / 4 - 1); | 
 | 		priv->qos_data.def_qos_parm.ac[i].cw_max = | 
 | 			cpu_to_le16((cw_min + 1) / 2 - 1); | 
 | 		priv->qos_data.def_qos_parm.ac[i].aifsn = 2; | 
 | 		priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; | 
 | 		if (is_legacy) | 
 | 			priv->qos_data.def_qos_parm.ac[i].edca_txop = | 
 | 				cpu_to_le16(3264); | 
 | 		else | 
 | 			priv->qos_data.def_qos_parm.ac[i].edca_txop = | 
 | 				cpu_to_le16(1504); | 
 | 	} else { | 
 | 		for (i = 1; i < 4; i++) { | 
 | 			priv->qos_data.def_qos_parm.ac[i].cw_min = | 
 | 				cpu_to_le16(cw_min); | 
 | 			priv->qos_data.def_qos_parm.ac[i].cw_max = | 
 | 				cpu_to_le16(cw_max); | 
 | 			priv->qos_data.def_qos_parm.ac[i].aifsn = aifs; | 
 | 			priv->qos_data.def_qos_parm.ac[i].edca_txop = 0; | 
 | 			priv->qos_data.def_qos_parm.ac[i].reserved1 = 0; | 
 | 		} | 
 | 	} | 
 | 	IWL_DEBUG_QOS(priv, "set QoS to default \n"); | 
 |  | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 | } | 
 | EXPORT_SYMBOL(iwl_reset_qos); | 
 |  | 
 | #define MAX_BIT_RATE_40_MHZ 150 /* Mbps */ | 
 | #define MAX_BIT_RATE_20_MHZ 72 /* Mbps */ | 
 | static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv, | 
 | 			      struct ieee80211_sta_ht_cap *ht_info, | 
 | 			      enum ieee80211_band band) | 
 | { | 
 | 	u16 max_bit_rate = 0; | 
 | 	u8 rx_chains_num = priv->hw_params.rx_chains_num; | 
 | 	u8 tx_chains_num = priv->hw_params.tx_chains_num; | 
 |  | 
 | 	ht_info->cap = 0; | 
 | 	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs)); | 
 |  | 
 | 	ht_info->ht_supported = true; | 
 |  | 
 | 	if (priv->cfg->ht_greenfield_support) | 
 | 		ht_info->cap |= IEEE80211_HT_CAP_GRN_FLD; | 
 | 	ht_info->cap |= IEEE80211_HT_CAP_SGI_20; | 
 | 	ht_info->cap |= (IEEE80211_HT_CAP_SM_PS & | 
 | 			     (WLAN_HT_CAP_SM_PS_DISABLED << 2)); | 
 |  | 
 | 	max_bit_rate = MAX_BIT_RATE_20_MHZ; | 
 | 	if (priv->hw_params.ht40_channel & BIT(band)) { | 
 | 		ht_info->cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; | 
 | 		ht_info->cap |= IEEE80211_HT_CAP_SGI_40; | 
 | 		ht_info->mcs.rx_mask[4] = 0x01; | 
 | 		max_bit_rate = MAX_BIT_RATE_40_MHZ; | 
 | 	} | 
 |  | 
 | 	if (priv->cfg->mod_params->amsdu_size_8K) | 
 | 		ht_info->cap |= IEEE80211_HT_CAP_MAX_AMSDU; | 
 |  | 
 | 	ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF; | 
 | 	ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF; | 
 |  | 
 | 	ht_info->mcs.rx_mask[0] = 0xFF; | 
 | 	if (rx_chains_num >= 2) | 
 | 		ht_info->mcs.rx_mask[1] = 0xFF; | 
 | 	if (rx_chains_num >= 3) | 
 | 		ht_info->mcs.rx_mask[2] = 0xFF; | 
 |  | 
 | 	/* Highest supported Rx data rate */ | 
 | 	max_bit_rate *= rx_chains_num; | 
 | 	WARN_ON(max_bit_rate & ~IEEE80211_HT_MCS_RX_HIGHEST_MASK); | 
 | 	ht_info->mcs.rx_highest = cpu_to_le16(max_bit_rate); | 
 |  | 
 | 	/* Tx MCS capabilities */ | 
 | 	ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; | 
 | 	if (tx_chains_num != rx_chains_num) { | 
 | 		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF; | 
 | 		ht_info->mcs.tx_params |= ((tx_chains_num - 1) << | 
 | 				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT); | 
 | 	} | 
 | } | 
 |  | 
 | static void iwlcore_init_hw_rates(struct iwl_priv *priv, | 
 | 			      struct ieee80211_rate *rates) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < IWL_RATE_COUNT_LEGACY; i++) { | 
 | 		rates[i].bitrate = iwl_rates[i].ieee * 5; | 
 | 		rates[i].hw_value = i; /* Rate scaling will work on indexes */ | 
 | 		rates[i].hw_value_short = i; | 
 | 		rates[i].flags = 0; | 
 | 		if ((i >= IWL_FIRST_CCK_RATE) && (i <= IWL_LAST_CCK_RATE)) { | 
 | 			/* | 
 | 			 * If CCK != 1M then set short preamble rate flag. | 
 | 			 */ | 
 | 			rates[i].flags |= | 
 | 				(iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ? | 
 | 					0 : IEEE80211_RATE_SHORT_PREAMBLE; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 |  | 
 | /** | 
 |  * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom | 
 |  */ | 
 | int iwlcore_init_geos(struct iwl_priv *priv) | 
 | { | 
 | 	struct iwl_channel_info *ch; | 
 | 	struct ieee80211_supported_band *sband; | 
 | 	struct ieee80211_channel *channels; | 
 | 	struct ieee80211_channel *geo_ch; | 
 | 	struct ieee80211_rate *rates; | 
 | 	int i = 0; | 
 |  | 
 | 	if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates || | 
 | 	    priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) { | 
 | 		IWL_DEBUG_INFO(priv, "Geography modes already initialized.\n"); | 
 | 		set_bit(STATUS_GEO_CONFIGURED, &priv->status); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	channels = kzalloc(sizeof(struct ieee80211_channel) * | 
 | 			   priv->channel_count, GFP_KERNEL); | 
 | 	if (!channels) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	rates = kzalloc((sizeof(struct ieee80211_rate) * IWL_RATE_COUNT_LEGACY), | 
 | 			GFP_KERNEL); | 
 | 	if (!rates) { | 
 | 		kfree(channels); | 
 | 		return -ENOMEM; | 
 | 	} | 
 |  | 
 | 	/* 5.2GHz channels start after the 2.4GHz channels */ | 
 | 	sband = &priv->bands[IEEE80211_BAND_5GHZ]; | 
 | 	sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)]; | 
 | 	/* just OFDM */ | 
 | 	sband->bitrates = &rates[IWL_FIRST_OFDM_RATE]; | 
 | 	sband->n_bitrates = IWL_RATE_COUNT_LEGACY - IWL_FIRST_OFDM_RATE; | 
 |  | 
 | 	if (priv->cfg->sku & IWL_SKU_N) | 
 | 		iwlcore_init_ht_hw_capab(priv, &sband->ht_cap, | 
 | 					 IEEE80211_BAND_5GHZ); | 
 |  | 
 | 	sband = &priv->bands[IEEE80211_BAND_2GHZ]; | 
 | 	sband->channels = channels; | 
 | 	/* OFDM & CCK */ | 
 | 	sband->bitrates = rates; | 
 | 	sband->n_bitrates = IWL_RATE_COUNT_LEGACY; | 
 |  | 
 | 	if (priv->cfg->sku & IWL_SKU_N) | 
 | 		iwlcore_init_ht_hw_capab(priv, &sband->ht_cap, | 
 | 					 IEEE80211_BAND_2GHZ); | 
 |  | 
 | 	priv->ieee_channels = channels; | 
 | 	priv->ieee_rates = rates; | 
 |  | 
 | 	for (i = 0;  i < priv->channel_count; i++) { | 
 | 		ch = &priv->channel_info[i]; | 
 |  | 
 | 		/* FIXME: might be removed if scan is OK */ | 
 | 		if (!is_channel_valid(ch)) | 
 | 			continue; | 
 |  | 
 | 		if (is_channel_a_band(ch)) | 
 | 			sband =  &priv->bands[IEEE80211_BAND_5GHZ]; | 
 | 		else | 
 | 			sband =  &priv->bands[IEEE80211_BAND_2GHZ]; | 
 |  | 
 | 		geo_ch = &sband->channels[sband->n_channels++]; | 
 |  | 
 | 		geo_ch->center_freq = | 
 | 				ieee80211_channel_to_frequency(ch->channel); | 
 | 		geo_ch->max_power = ch->max_power_avg; | 
 | 		geo_ch->max_antenna_gain = 0xff; | 
 | 		geo_ch->hw_value = ch->channel; | 
 |  | 
 | 		if (is_channel_valid(ch)) { | 
 | 			if (!(ch->flags & EEPROM_CHANNEL_IBSS)) | 
 | 				geo_ch->flags |= IEEE80211_CHAN_NO_IBSS; | 
 |  | 
 | 			if (!(ch->flags & EEPROM_CHANNEL_ACTIVE)) | 
 | 				geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN; | 
 |  | 
 | 			if (ch->flags & EEPROM_CHANNEL_RADAR) | 
 | 				geo_ch->flags |= IEEE80211_CHAN_RADAR; | 
 |  | 
 | 			geo_ch->flags |= ch->ht40_extension_channel; | 
 |  | 
 | 			if (ch->max_power_avg > priv->tx_power_device_lmt) | 
 | 				priv->tx_power_device_lmt = ch->max_power_avg; | 
 | 		} else { | 
 | 			geo_ch->flags |= IEEE80211_CHAN_DISABLED; | 
 | 		} | 
 |  | 
 | 		IWL_DEBUG_INFO(priv, "Channel %d Freq=%d[%sGHz] %s flag=0x%X\n", | 
 | 				ch->channel, geo_ch->center_freq, | 
 | 				is_channel_a_band(ch) ?  "5.2" : "2.4", | 
 | 				geo_ch->flags & IEEE80211_CHAN_DISABLED ? | 
 | 				"restricted" : "valid", | 
 | 				 geo_ch->flags); | 
 | 	} | 
 |  | 
 | 	if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) && | 
 | 	     priv->cfg->sku & IWL_SKU_A) { | 
 | 		IWL_INFO(priv, "Incorrectly detected BG card as ABG. " | 
 | 			"Please send your PCI ID 0x%04X:0x%04X to maintainer.\n", | 
 | 			   priv->pci_dev->device, | 
 | 			   priv->pci_dev->subsystem_device); | 
 | 		priv->cfg->sku &= ~IWL_SKU_A; | 
 | 	} | 
 |  | 
 | 	IWL_INFO(priv, "Tunable channels: %d 802.11bg, %d 802.11a channels\n", | 
 | 		   priv->bands[IEEE80211_BAND_2GHZ].n_channels, | 
 | 		   priv->bands[IEEE80211_BAND_5GHZ].n_channels); | 
 |  | 
 | 	set_bit(STATUS_GEO_CONFIGURED, &priv->status); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwlcore_init_geos); | 
 |  | 
 | /* | 
 |  * iwlcore_free_geos - undo allocations in iwlcore_init_geos | 
 |  */ | 
 | void iwlcore_free_geos(struct iwl_priv *priv) | 
 | { | 
 | 	kfree(priv->ieee_channels); | 
 | 	kfree(priv->ieee_rates); | 
 | 	clear_bit(STATUS_GEO_CONFIGURED, &priv->status); | 
 | } | 
 | EXPORT_SYMBOL(iwlcore_free_geos); | 
 |  | 
 | static bool is_single_rx_stream(struct iwl_priv *priv) | 
 | { | 
 | 	return !priv->current_ht_config.is_ht || | 
 | 	       ((priv->current_ht_config.mcs.rx_mask[1] == 0) && | 
 | 		(priv->current_ht_config.mcs.rx_mask[2] == 0)); | 
 | } | 
 |  | 
 | static u8 iwl_is_channel_extension(struct iwl_priv *priv, | 
 | 				   enum ieee80211_band band, | 
 | 				   u16 channel, u8 extension_chan_offset) | 
 | { | 
 | 	const struct iwl_channel_info *ch_info; | 
 |  | 
 | 	ch_info = iwl_get_channel_info(priv, band, channel); | 
 | 	if (!is_channel_valid(ch_info)) | 
 | 		return 0; | 
 |  | 
 | 	if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) | 
 | 		return !(ch_info->ht40_extension_channel & | 
 | 					IEEE80211_CHAN_NO_HT40PLUS); | 
 | 	else if (extension_chan_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) | 
 | 		return !(ch_info->ht40_extension_channel & | 
 | 					IEEE80211_CHAN_NO_HT40MINUS); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv, | 
 | 			 struct ieee80211_sta_ht_cap *sta_ht_inf) | 
 | { | 
 | 	struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config; | 
 |  | 
 | 	if ((!iwl_ht_conf->is_ht) || | 
 | 	    (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ)) | 
 | 		return 0; | 
 |  | 
 | 	/* We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40 | 
 | 	 * the bit will not set if it is pure 40MHz case | 
 | 	 */ | 
 | 	if (sta_ht_inf) { | 
 | 		if (!sta_ht_inf->ht_supported) | 
 | 			return 0; | 
 | 	} | 
 | #ifdef CONFIG_IWLWIFI_DEBUG | 
 | 	if (priv->disable_ht40) | 
 | 		return 0; | 
 | #endif | 
 | 	return iwl_is_channel_extension(priv, priv->band, | 
 | 			le16_to_cpu(priv->staging_rxon.channel), | 
 | 			iwl_ht_conf->extension_chan_offset); | 
 | } | 
 | EXPORT_SYMBOL(iwl_is_ht40_tx_allowed); | 
 |  | 
 | static u16 iwl_adjust_beacon_interval(u16 beacon_val, u16 max_beacon_val) | 
 | { | 
 | 	u16 new_val = 0; | 
 | 	u16 beacon_factor = 0; | 
 |  | 
 | 	beacon_factor = (beacon_val + max_beacon_val) / max_beacon_val; | 
 | 	new_val = beacon_val / beacon_factor; | 
 |  | 
 | 	if (!new_val) | 
 | 		new_val = max_beacon_val; | 
 |  | 
 | 	return new_val; | 
 | } | 
 |  | 
 | void iwl_setup_rxon_timing(struct iwl_priv *priv) | 
 | { | 
 | 	u64 tsf; | 
 | 	s32 interval_tm, rem; | 
 | 	unsigned long flags; | 
 | 	struct ieee80211_conf *conf = NULL; | 
 | 	u16 beacon_int; | 
 |  | 
 | 	conf = ieee80211_get_hw_conf(priv->hw); | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 | 	priv->rxon_timing.timestamp = cpu_to_le64(priv->timestamp); | 
 | 	priv->rxon_timing.listen_interval = cpu_to_le16(conf->listen_interval); | 
 |  | 
 | 	if (priv->iw_mode == NL80211_IFTYPE_STATION) { | 
 | 		beacon_int = priv->beacon_int; | 
 | 		priv->rxon_timing.atim_window = 0; | 
 | 	} else { | 
 | 		beacon_int = priv->vif->bss_conf.beacon_int; | 
 |  | 
 | 		/* TODO: we need to get atim_window from upper stack | 
 | 		 * for now we set to 0 */ | 
 | 		priv->rxon_timing.atim_window = 0; | 
 | 	} | 
 |  | 
 | 	beacon_int = iwl_adjust_beacon_interval(beacon_int, | 
 | 				priv->hw_params.max_beacon_itrvl * 1024); | 
 | 	priv->rxon_timing.beacon_interval = cpu_to_le16(beacon_int); | 
 |  | 
 | 	tsf = priv->timestamp; /* tsf is modifed by do_div: copy it */ | 
 | 	interval_tm = beacon_int * 1024; | 
 | 	rem = do_div(tsf, interval_tm); | 
 | 	priv->rxon_timing.beacon_init_val = cpu_to_le32(interval_tm - rem); | 
 |  | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 | 	IWL_DEBUG_ASSOC(priv, | 
 | 			"beacon interval %d beacon timer %d beacon tim %d\n", | 
 | 			le16_to_cpu(priv->rxon_timing.beacon_interval), | 
 | 			le32_to_cpu(priv->rxon_timing.beacon_init_val), | 
 | 			le16_to_cpu(priv->rxon_timing.atim_window)); | 
 | } | 
 | EXPORT_SYMBOL(iwl_setup_rxon_timing); | 
 |  | 
 | void iwl_set_rxon_hwcrypto(struct iwl_priv *priv, int hw_decrypt) | 
 | { | 
 | 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon; | 
 |  | 
 | 	if (hw_decrypt) | 
 | 		rxon->filter_flags &= ~RXON_FILTER_DIS_DECRYPT_MSK; | 
 | 	else | 
 | 		rxon->filter_flags |= RXON_FILTER_DIS_DECRYPT_MSK; | 
 |  | 
 | } | 
 | EXPORT_SYMBOL(iwl_set_rxon_hwcrypto); | 
 |  | 
 | /** | 
 |  * iwl_check_rxon_cmd - validate RXON structure is valid | 
 |  * | 
 |  * NOTE:  This is really only useful during development and can eventually | 
 |  * be #ifdef'd out once the driver is stable and folks aren't actively | 
 |  * making changes | 
 |  */ | 
 | int iwl_check_rxon_cmd(struct iwl_priv *priv) | 
 | { | 
 | 	int error = 0; | 
 | 	int counter = 1; | 
 | 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon; | 
 |  | 
 | 	if (rxon->flags & RXON_FLG_BAND_24G_MSK) { | 
 | 		error |= le32_to_cpu(rxon->flags & | 
 | 				(RXON_FLG_TGJ_NARROW_BAND_MSK | | 
 | 				 RXON_FLG_RADAR_DETECT_MSK)); | 
 | 		if (error) | 
 | 			IWL_WARN(priv, "check 24G fields %d | %d\n", | 
 | 				    counter++, error); | 
 | 	} else { | 
 | 		error |= (rxon->flags & RXON_FLG_SHORT_SLOT_MSK) ? | 
 | 				0 : le32_to_cpu(RXON_FLG_SHORT_SLOT_MSK); | 
 | 		if (error) | 
 | 			IWL_WARN(priv, "check 52 fields %d | %d\n", | 
 | 				    counter++, error); | 
 | 		error |= le32_to_cpu(rxon->flags & RXON_FLG_CCK_MSK); | 
 | 		if (error) | 
 | 			IWL_WARN(priv, "check 52 CCK %d | %d\n", | 
 | 				    counter++, error); | 
 | 	} | 
 | 	error |= (rxon->node_addr[0] | rxon->bssid_addr[0]) & 0x1; | 
 | 	if (error) | 
 | 		IWL_WARN(priv, "check mac addr %d | %d\n", counter++, error); | 
 |  | 
 | 	/* make sure basic rates 6Mbps and 1Mbps are supported */ | 
 | 	error |= (((rxon->ofdm_basic_rates & IWL_RATE_6M_MASK) == 0) && | 
 | 		  ((rxon->cck_basic_rates & IWL_RATE_1M_MASK) == 0)); | 
 | 	if (error) | 
 | 		IWL_WARN(priv, "check basic rate %d | %d\n", counter++, error); | 
 |  | 
 | 	error |= (le16_to_cpu(rxon->assoc_id) > 2007); | 
 | 	if (error) | 
 | 		IWL_WARN(priv, "check assoc id %d | %d\n", counter++, error); | 
 |  | 
 | 	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)) | 
 | 			== (RXON_FLG_CCK_MSK | RXON_FLG_SHORT_SLOT_MSK)); | 
 | 	if (error) | 
 | 		IWL_WARN(priv, "check CCK and short slot %d | %d\n", | 
 | 			    counter++, error); | 
 |  | 
 | 	error |= ((rxon->flags & (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)) | 
 | 			== (RXON_FLG_CCK_MSK | RXON_FLG_AUTO_DETECT_MSK)); | 
 | 	if (error) | 
 | 		IWL_WARN(priv, "check CCK & auto detect %d | %d\n", | 
 | 			    counter++, error); | 
 |  | 
 | 	error |= ((rxon->flags & (RXON_FLG_AUTO_DETECT_MSK | | 
 | 			RXON_FLG_TGG_PROTECT_MSK)) == RXON_FLG_TGG_PROTECT_MSK); | 
 | 	if (error) | 
 | 		IWL_WARN(priv, "check TGG and auto detect %d | %d\n", | 
 | 			    counter++, error); | 
 |  | 
 | 	if (error) | 
 | 		IWL_WARN(priv, "Tuning to channel %d\n", | 
 | 			    le16_to_cpu(rxon->channel)); | 
 |  | 
 | 	if (error) { | 
 | 		IWL_ERR(priv, "Not a valid iwl_rxon_assoc_cmd field values\n"); | 
 | 		return -1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_check_rxon_cmd); | 
 |  | 
 | /** | 
 |  * iwl_full_rxon_required - check if full RXON (vs RXON_ASSOC) cmd is needed | 
 |  * @priv: staging_rxon is compared to active_rxon | 
 |  * | 
 |  * If the RXON structure is changing enough to require a new tune, | 
 |  * or is clearing the RXON_FILTER_ASSOC_MSK, then return 1 to indicate that | 
 |  * a new tune (full RXON command, rather than RXON_ASSOC cmd) is required. | 
 |  */ | 
 | int iwl_full_rxon_required(struct iwl_priv *priv) | 
 | { | 
 |  | 
 | 	/* These items are only settable from the full RXON command */ | 
 | 	if (!(iwl_is_associated(priv)) || | 
 | 	    compare_ether_addr(priv->staging_rxon.bssid_addr, | 
 | 			       priv->active_rxon.bssid_addr) || | 
 | 	    compare_ether_addr(priv->staging_rxon.node_addr, | 
 | 			       priv->active_rxon.node_addr) || | 
 | 	    compare_ether_addr(priv->staging_rxon.wlap_bssid_addr, | 
 | 			       priv->active_rxon.wlap_bssid_addr) || | 
 | 	    (priv->staging_rxon.dev_type != priv->active_rxon.dev_type) || | 
 | 	    (priv->staging_rxon.channel != priv->active_rxon.channel) || | 
 | 	    (priv->staging_rxon.air_propagation != | 
 | 	     priv->active_rxon.air_propagation) || | 
 | 	    (priv->staging_rxon.ofdm_ht_single_stream_basic_rates != | 
 | 	     priv->active_rxon.ofdm_ht_single_stream_basic_rates) || | 
 | 	    (priv->staging_rxon.ofdm_ht_dual_stream_basic_rates != | 
 | 	     priv->active_rxon.ofdm_ht_dual_stream_basic_rates) || | 
 | 	    (priv->staging_rxon.ofdm_ht_triple_stream_basic_rates != | 
 | 	     priv->active_rxon.ofdm_ht_triple_stream_basic_rates) || | 
 | 	    (priv->staging_rxon.assoc_id != priv->active_rxon.assoc_id)) | 
 | 		return 1; | 
 |  | 
 | 	/* flags, filter_flags, ofdm_basic_rates, and cck_basic_rates can | 
 | 	 * be updated with the RXON_ASSOC command -- however only some | 
 | 	 * flag transitions are allowed using RXON_ASSOC */ | 
 |  | 
 | 	/* Check if we are not switching bands */ | 
 | 	if ((priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) != | 
 | 	    (priv->active_rxon.flags & RXON_FLG_BAND_24G_MSK)) | 
 | 		return 1; | 
 |  | 
 | 	/* Check if we are switching association toggle */ | 
 | 	if ((priv->staging_rxon.filter_flags & RXON_FILTER_ASSOC_MSK) != | 
 | 		(priv->active_rxon.filter_flags & RXON_FILTER_ASSOC_MSK)) | 
 | 		return 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_full_rxon_required); | 
 |  | 
 | u8 iwl_rate_get_lowest_plcp(struct iwl_priv *priv) | 
 | { | 
 | 	int i; | 
 | 	int rate_mask; | 
 |  | 
 | 	/* Set rate mask*/ | 
 | 	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) | 
 | 		rate_mask = priv->active_rate_basic & IWL_CCK_RATES_MASK; | 
 | 	else | 
 | 		rate_mask = priv->active_rate_basic & IWL_OFDM_RATES_MASK; | 
 |  | 
 | 	/* Find lowest valid rate */ | 
 | 	for (i = IWL_RATE_1M_INDEX; i != IWL_RATE_INVALID; | 
 | 					i = iwl_rates[i].next_ieee) { | 
 | 		if (rate_mask & (1 << i)) | 
 | 			return iwl_rates[i].plcp; | 
 | 	} | 
 |  | 
 | 	/* No valid rate was found. Assign the lowest one */ | 
 | 	if (priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) | 
 | 		return IWL_RATE_1M_PLCP; | 
 | 	else | 
 | 		return IWL_RATE_6M_PLCP; | 
 | } | 
 | EXPORT_SYMBOL(iwl_rate_get_lowest_plcp); | 
 |  | 
 | void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info) | 
 | { | 
 | 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon; | 
 |  | 
 | 	if (!ht_info->is_ht) { | 
 | 		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | | 
 | 			RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK | | 
 | 			RXON_FLG_HT40_PROT_MSK | | 
 | 			RXON_FLG_HT_PROT_MSK); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* FIXME: if the definition of ht_protection changed, the "translation" | 
 | 	 * will be needed for rxon->flags | 
 | 	 */ | 
 | 	rxon->flags |= cpu_to_le32(ht_info->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS); | 
 |  | 
 | 	/* Set up channel bandwidth: | 
 | 	 * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */ | 
 | 	/* clear the HT channel mode before set the mode */ | 
 | 	rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK | | 
 | 			 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); | 
 | 	if (iwl_is_ht40_tx_allowed(priv, NULL)) { | 
 | 		/* pure ht40 */ | 
 | 		if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) { | 
 | 			rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40; | 
 | 			/* Note: control channel is opposite of extension channel */ | 
 | 			switch (ht_info->extension_chan_offset) { | 
 | 			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | 
 | 				rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; | 
 | 				break; | 
 | 			case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | 
 | 				rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; | 
 | 				break; | 
 | 			} | 
 | 		} else { | 
 | 			/* Note: control channel is opposite of extension channel */ | 
 | 			switch (ht_info->extension_chan_offset) { | 
 | 			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: | 
 | 				rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK); | 
 | 				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; | 
 | 				break; | 
 | 			case IEEE80211_HT_PARAM_CHA_SEC_BELOW: | 
 | 				rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK; | 
 | 				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED; | 
 | 				break; | 
 | 			case IEEE80211_HT_PARAM_CHA_SEC_NONE: | 
 | 			default: | 
 | 				/* channel location only valid if in Mixed mode */ | 
 | 				IWL_ERR(priv, "invalid extension channel offset\n"); | 
 | 				break; | 
 | 			} | 
 | 		} | 
 | 	} else { | 
 | 		rxon->flags |= RXON_FLG_CHANNEL_MODE_LEGACY; | 
 | 	} | 
 |  | 
 | 	if (priv->cfg->ops->hcmd->set_rxon_chain) | 
 | 		priv->cfg->ops->hcmd->set_rxon_chain(priv); | 
 |  | 
 | 	IWL_DEBUG_ASSOC(priv, "supported HT rate 0x%X 0x%X 0x%X " | 
 | 			"rxon flags 0x%X operation mode :0x%X " | 
 | 			"extension channel offset 0x%x\n", | 
 | 			ht_info->mcs.rx_mask[0], | 
 | 			ht_info->mcs.rx_mask[1], | 
 | 			ht_info->mcs.rx_mask[2], | 
 | 			le32_to_cpu(rxon->flags), ht_info->ht_protection, | 
 | 			ht_info->extension_chan_offset); | 
 | 	return; | 
 | } | 
 | EXPORT_SYMBOL(iwl_set_rxon_ht); | 
 |  | 
 | #define IWL_NUM_RX_CHAINS_MULTIPLE	3 | 
 | #define IWL_NUM_RX_CHAINS_SINGLE	2 | 
 | #define IWL_NUM_IDLE_CHAINS_DUAL	2 | 
 | #define IWL_NUM_IDLE_CHAINS_SINGLE	1 | 
 |  | 
 | /* Determine how many receiver/antenna chains to use. | 
 |  * More provides better reception via diversity.  Fewer saves power. | 
 |  * MIMO (dual stream) requires at least 2, but works better with 3. | 
 |  * This does not determine *which* chains to use, just how many. | 
 |  */ | 
 | static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) | 
 | { | 
 | 	bool is_single = is_single_rx_stream(priv); | 
 | 	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); | 
 |  | 
 | 	/* # of Rx chains to use when expecting MIMO. */ | 
 | 	if (is_single || (!is_cam && (priv->current_ht_config.sm_ps == | 
 | 						 WLAN_HT_CAP_SM_PS_STATIC))) | 
 | 		return IWL_NUM_RX_CHAINS_SINGLE; | 
 | 	else | 
 | 		return IWL_NUM_RX_CHAINS_MULTIPLE; | 
 | } | 
 |  | 
 | static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) | 
 | { | 
 | 	int idle_cnt; | 
 | 	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); | 
 | 	/* # Rx chains when idling and maybe trying to save power */ | 
 | 	switch (priv->current_ht_config.sm_ps) { | 
 | 	case WLAN_HT_CAP_SM_PS_STATIC: | 
 | 	case WLAN_HT_CAP_SM_PS_DYNAMIC: | 
 | 		idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL : | 
 | 					IWL_NUM_IDLE_CHAINS_SINGLE; | 
 | 		break; | 
 | 	case WLAN_HT_CAP_SM_PS_DISABLED: | 
 | 		idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE; | 
 | 		break; | 
 | 	case WLAN_HT_CAP_SM_PS_INVALID: | 
 | 	default: | 
 | 		IWL_ERR(priv, "invalid mimo ps mode %d\n", | 
 | 			   priv->current_ht_config.sm_ps); | 
 | 		WARN_ON(1); | 
 | 		idle_cnt = -1; | 
 | 		break; | 
 | 	} | 
 | 	return idle_cnt; | 
 | } | 
 |  | 
 | /* up to 4 chains */ | 
 | static u8 iwl_count_chain_bitmap(u32 chain_bitmap) | 
 | { | 
 | 	u8 res; | 
 | 	res = (chain_bitmap & BIT(0)) >> 0; | 
 | 	res += (chain_bitmap & BIT(1)) >> 1; | 
 | 	res += (chain_bitmap & BIT(2)) >> 2; | 
 | 	res += (chain_bitmap & BIT(4)) >> 4; | 
 | 	return res; | 
 | } | 
 |  | 
 | /** | 
 |  * iwl_is_monitor_mode - Determine if interface in monitor mode | 
 |  * | 
 |  * priv->iw_mode is set in add_interface, but add_interface is | 
 |  * never called for monitor mode. The only way mac80211 informs us about | 
 |  * monitor mode is through configuring filters (call to configure_filter). | 
 |  */ | 
 | bool iwl_is_monitor_mode(struct iwl_priv *priv) | 
 | { | 
 | 	return !!(priv->staging_rxon.filter_flags & RXON_FILTER_PROMISC_MSK); | 
 | } | 
 | EXPORT_SYMBOL(iwl_is_monitor_mode); | 
 |  | 
 | /** | 
 |  * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image | 
 |  * | 
 |  * Selects how many and which Rx receivers/antennas/chains to use. | 
 |  * This should not be used for scan command ... it puts data in wrong place. | 
 |  */ | 
 | void iwl_set_rxon_chain(struct iwl_priv *priv) | 
 | { | 
 | 	bool is_single = is_single_rx_stream(priv); | 
 | 	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); | 
 | 	u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt; | 
 | 	u32 active_chains; | 
 | 	u16 rx_chain; | 
 |  | 
 | 	/* Tell uCode which antennas are actually connected. | 
 | 	 * Before first association, we assume all antennas are connected. | 
 | 	 * Just after first association, iwl_chain_noise_calibration() | 
 | 	 *    checks which antennas actually *are* connected. */ | 
 | 	 if (priv->chain_noise_data.active_chains) | 
 | 		active_chains = priv->chain_noise_data.active_chains; | 
 | 	else | 
 | 		active_chains = priv->hw_params.valid_rx_ant; | 
 |  | 
 | 	rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS; | 
 |  | 
 | 	/* How many receivers should we use? */ | 
 | 	active_rx_cnt = iwl_get_active_rx_chain_count(priv); | 
 | 	idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); | 
 |  | 
 |  | 
 | 	/* correct rx chain count according hw settings | 
 | 	 * and chain noise calibration | 
 | 	 */ | 
 | 	valid_rx_cnt = iwl_count_chain_bitmap(active_chains); | 
 | 	if (valid_rx_cnt < active_rx_cnt) | 
 | 		active_rx_cnt = valid_rx_cnt; | 
 |  | 
 | 	if (valid_rx_cnt < idle_rx_cnt) | 
 | 		idle_rx_cnt = valid_rx_cnt; | 
 |  | 
 | 	rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; | 
 | 	rx_chain |= idle_rx_cnt  << RXON_RX_CHAIN_CNT_POS; | 
 |  | 
 | 	/* copied from 'iwl_bg_request_scan()' */ | 
 | 	/* Force use of chains B and C (0x6) for Rx for 4965 | 
 | 	 * Avoid A (0x1) because of its off-channel reception on A-band. | 
 | 	 * MIMO is not used here, but value is required */ | 
 | 	if (iwl_is_monitor_mode(priv) && | 
 | 	    !(priv->staging_rxon.flags & RXON_FLG_BAND_24G_MSK) && | 
 | 	    ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)) { | 
 | 		rx_chain = ANT_ABC << RXON_RX_CHAIN_VALID_POS; | 
 | 		rx_chain |= ANT_BC << RXON_RX_CHAIN_FORCE_SEL_POS; | 
 | 		rx_chain |= ANT_ABC << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS; | 
 | 		rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS; | 
 | 	} | 
 |  | 
 | 	priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain); | 
 |  | 
 | 	if (!is_single && (active_rx_cnt >= IWL_NUM_RX_CHAINS_SINGLE) && is_cam) | 
 | 		priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; | 
 | 	else | 
 | 		priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; | 
 |  | 
 | 	IWL_DEBUG_ASSOC(priv, "rx_chain=0x%X active=%d idle=%d\n", | 
 | 			priv->staging_rxon.rx_chain, | 
 | 			active_rx_cnt, idle_rx_cnt); | 
 |  | 
 | 	WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || | 
 | 		active_rx_cnt < idle_rx_cnt); | 
 | } | 
 | EXPORT_SYMBOL(iwl_set_rxon_chain); | 
 |  | 
 | /** | 
 |  * iwl_set_rxon_channel - Set the phymode and channel values in staging RXON | 
 |  * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz | 
 |  * @channel: Any channel valid for the requested phymode | 
 |  | 
 |  * In addition to setting the staging RXON, priv->phymode is also set. | 
 |  * | 
 |  * NOTE:  Does not commit to the hardware; it sets appropriate bit fields | 
 |  * in the staging RXON flag structure based on the phymode | 
 |  */ | 
 | int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch) | 
 | { | 
 | 	enum ieee80211_band band = ch->band; | 
 | 	u16 channel = ieee80211_frequency_to_channel(ch->center_freq); | 
 |  | 
 | 	if (!iwl_get_channel_info(priv, band, channel)) { | 
 | 		IWL_DEBUG_INFO(priv, "Could not set channel to %d [%d]\n", | 
 | 			       channel, band); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if ((le16_to_cpu(priv->staging_rxon.channel) == channel) && | 
 | 	    (priv->band == band)) | 
 | 		return 0; | 
 |  | 
 | 	priv->staging_rxon.channel = cpu_to_le16(channel); | 
 | 	if (band == IEEE80211_BAND_5GHZ) | 
 | 		priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK; | 
 | 	else | 
 | 		priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; | 
 |  | 
 | 	priv->band = band; | 
 |  | 
 | 	IWL_DEBUG_INFO(priv, "Staging channel set to %d [%d]\n", channel, band); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_set_rxon_channel); | 
 |  | 
 | void iwl_set_flags_for_band(struct iwl_priv *priv, | 
 | 			    enum ieee80211_band band) | 
 | { | 
 | 	if (band == IEEE80211_BAND_5GHZ) { | 
 | 		priv->staging_rxon.flags &= | 
 | 		    ~(RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK | 
 | 		      | RXON_FLG_CCK_MSK); | 
 | 		priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; | 
 | 	} else { | 
 | 		/* Copied from iwl_post_associate() */ | 
 | 		if (priv->assoc_capability & WLAN_CAPABILITY_SHORT_SLOT_TIME) | 
 | 			priv->staging_rxon.flags |= RXON_FLG_SHORT_SLOT_MSK; | 
 | 		else | 
 | 			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | 
 |  | 
 | 		if (priv->iw_mode == NL80211_IFTYPE_ADHOC) | 
 | 			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_SLOT_MSK; | 
 |  | 
 | 		priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK; | 
 | 		priv->staging_rxon.flags |= RXON_FLG_AUTO_DETECT_MSK; | 
 | 		priv->staging_rxon.flags &= ~RXON_FLG_CCK_MSK; | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * initialize rxon structure with default values from eeprom | 
 |  */ | 
 | void iwl_connection_init_rx_config(struct iwl_priv *priv, int mode) | 
 | { | 
 | 	const struct iwl_channel_info *ch_info; | 
 |  | 
 | 	memset(&priv->staging_rxon, 0, sizeof(priv->staging_rxon)); | 
 |  | 
 | 	switch (mode) { | 
 | 	case NL80211_IFTYPE_AP: | 
 | 		priv->staging_rxon.dev_type = RXON_DEV_TYPE_AP; | 
 | 		break; | 
 |  | 
 | 	case NL80211_IFTYPE_STATION: | 
 | 		priv->staging_rxon.dev_type = RXON_DEV_TYPE_ESS; | 
 | 		priv->staging_rxon.filter_flags = RXON_FILTER_ACCEPT_GRP_MSK; | 
 | 		break; | 
 |  | 
 | 	case NL80211_IFTYPE_ADHOC: | 
 | 		priv->staging_rxon.dev_type = RXON_DEV_TYPE_IBSS; | 
 | 		priv->staging_rxon.flags = RXON_FLG_SHORT_PREAMBLE_MSK; | 
 | 		priv->staging_rxon.filter_flags = RXON_FILTER_BCON_AWARE_MSK | | 
 | 						  RXON_FILTER_ACCEPT_GRP_MSK; | 
 | 		break; | 
 |  | 
 | 	default: | 
 | 		IWL_ERR(priv, "Unsupported interface type %d\n", mode); | 
 | 		break; | 
 | 	} | 
 |  | 
 | #if 0 | 
 | 	/* TODO:  Figure out when short_preamble would be set and cache from | 
 | 	 * that */ | 
 | 	if (!hw_to_local(priv->hw)->short_preamble) | 
 | 		priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; | 
 | 	else | 
 | 		priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; | 
 | #endif | 
 |  | 
 | 	ch_info = iwl_get_channel_info(priv, priv->band, | 
 | 				       le16_to_cpu(priv->active_rxon.channel)); | 
 |  | 
 | 	if (!ch_info) | 
 | 		ch_info = &priv->channel_info[0]; | 
 |  | 
 | 	/* | 
 | 	 * in some case A channels are all non IBSS | 
 | 	 * in this case force B/G channel | 
 | 	 */ | 
 | 	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) && | 
 | 	    !(is_channel_ibss(ch_info))) | 
 | 		ch_info = &priv->channel_info[0]; | 
 |  | 
 | 	priv->staging_rxon.channel = cpu_to_le16(ch_info->channel); | 
 | 	priv->band = ch_info->band; | 
 |  | 
 | 	iwl_set_flags_for_band(priv, priv->band); | 
 |  | 
 | 	priv->staging_rxon.ofdm_basic_rates = | 
 | 	    (IWL_OFDM_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; | 
 | 	priv->staging_rxon.cck_basic_rates = | 
 | 	    (IWL_CCK_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; | 
 |  | 
 | 	/* clear both MIX and PURE40 mode flag */ | 
 | 	priv->staging_rxon.flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED | | 
 | 					RXON_FLG_CHANNEL_MODE_PURE_40); | 
 | 	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); | 
 | 	memcpy(priv->staging_rxon.wlap_bssid_addr, priv->mac_addr, ETH_ALEN); | 
 | 	priv->staging_rxon.ofdm_ht_single_stream_basic_rates = 0xff; | 
 | 	priv->staging_rxon.ofdm_ht_dual_stream_basic_rates = 0xff; | 
 | 	priv->staging_rxon.ofdm_ht_triple_stream_basic_rates = 0xff; | 
 | } | 
 | EXPORT_SYMBOL(iwl_connection_init_rx_config); | 
 |  | 
 | static void iwl_set_rate(struct iwl_priv *priv) | 
 | { | 
 | 	const struct ieee80211_supported_band *hw = NULL; | 
 | 	struct ieee80211_rate *rate; | 
 | 	int i; | 
 |  | 
 | 	hw = iwl_get_hw_mode(priv, priv->band); | 
 | 	if (!hw) { | 
 | 		IWL_ERR(priv, "Failed to set rate: unable to get hw mode\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	priv->active_rate = 0; | 
 | 	priv->active_rate_basic = 0; | 
 |  | 
 | 	for (i = 0; i < hw->n_bitrates; i++) { | 
 | 		rate = &(hw->bitrates[i]); | 
 | 		if (rate->hw_value < IWL_RATE_COUNT_LEGACY) | 
 | 			priv->active_rate |= (1 << rate->hw_value); | 
 | 	} | 
 |  | 
 | 	IWL_DEBUG_RATE(priv, "Set active_rate = %0x, active_rate_basic = %0x\n", | 
 | 		       priv->active_rate, priv->active_rate_basic); | 
 |  | 
 | 	/* | 
 | 	 * If a basic rate is configured, then use it (adding IWL_RATE_1M_MASK) | 
 | 	 * otherwise set it to the default of all CCK rates and 6, 12, 24 for | 
 | 	 * OFDM | 
 | 	 */ | 
 | 	if (priv->active_rate_basic & IWL_CCK_BASIC_RATES_MASK) | 
 | 		priv->staging_rxon.cck_basic_rates = | 
 | 		    ((priv->active_rate_basic & | 
 | 		      IWL_CCK_RATES_MASK) >> IWL_FIRST_CCK_RATE) & 0xF; | 
 | 	else | 
 | 		priv->staging_rxon.cck_basic_rates = | 
 | 		    (IWL_CCK_BASIC_RATES_MASK >> IWL_FIRST_CCK_RATE) & 0xF; | 
 |  | 
 | 	if (priv->active_rate_basic & IWL_OFDM_BASIC_RATES_MASK) | 
 | 		priv->staging_rxon.ofdm_basic_rates = | 
 | 		    ((priv->active_rate_basic & | 
 | 		      (IWL_OFDM_BASIC_RATES_MASK | IWL_RATE_6M_MASK)) >> | 
 | 		      IWL_FIRST_OFDM_RATE) & 0xFF; | 
 | 	else | 
 | 		priv->staging_rxon.ofdm_basic_rates = | 
 | 		   (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; | 
 | } | 
 |  | 
 | void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) | 
 | { | 
 | 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; | 
 | 	struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon; | 
 | 	struct iwl_csa_notification *csa = &(pkt->u.csa_notif); | 
 | 	IWL_DEBUG_11H(priv, "CSA notif: channel %d, status %d\n", | 
 | 		      le16_to_cpu(csa->channel), le32_to_cpu(csa->status)); | 
 | 	rxon->channel = csa->channel; | 
 | 	priv->staging_rxon.channel = csa->channel; | 
 | } | 
 | EXPORT_SYMBOL(iwl_rx_csa); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUG | 
 | static void iwl_print_rx_config_cmd(struct iwl_priv *priv) | 
 | { | 
 | 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon; | 
 |  | 
 | 	IWL_DEBUG_RADIO(priv, "RX CONFIG:\n"); | 
 | 	iwl_print_hex_dump(priv, IWL_DL_RADIO, (u8 *) rxon, sizeof(*rxon)); | 
 | 	IWL_DEBUG_RADIO(priv, "u16 channel: 0x%x\n", le16_to_cpu(rxon->channel)); | 
 | 	IWL_DEBUG_RADIO(priv, "u32 flags: 0x%08X\n", le32_to_cpu(rxon->flags)); | 
 | 	IWL_DEBUG_RADIO(priv, "u32 filter_flags: 0x%08x\n", | 
 | 			le32_to_cpu(rxon->filter_flags)); | 
 | 	IWL_DEBUG_RADIO(priv, "u8 dev_type: 0x%x\n", rxon->dev_type); | 
 | 	IWL_DEBUG_RADIO(priv, "u8 ofdm_basic_rates: 0x%02x\n", | 
 | 			rxon->ofdm_basic_rates); | 
 | 	IWL_DEBUG_RADIO(priv, "u8 cck_basic_rates: 0x%02x\n", rxon->cck_basic_rates); | 
 | 	IWL_DEBUG_RADIO(priv, "u8[6] node_addr: %pM\n", rxon->node_addr); | 
 | 	IWL_DEBUG_RADIO(priv, "u8[6] bssid_addr: %pM\n", rxon->bssid_addr); | 
 | 	IWL_DEBUG_RADIO(priv, "u16 assoc_id: 0x%x\n", le16_to_cpu(rxon->assoc_id)); | 
 | } | 
 |  | 
 | static const char *desc_lookup_text[] = { | 
 | 	"OK", | 
 | 	"FAIL", | 
 | 	"BAD_PARAM", | 
 | 	"BAD_CHECKSUM", | 
 | 	"NMI_INTERRUPT_WDG", | 
 | 	"SYSASSERT", | 
 | 	"FATAL_ERROR", | 
 | 	"BAD_COMMAND", | 
 | 	"HW_ERROR_TUNE_LOCK", | 
 | 	"HW_ERROR_TEMPERATURE", | 
 | 	"ILLEGAL_CHAN_FREQ", | 
 | 	"VCC_NOT_STABLE", | 
 | 	"FH_ERROR", | 
 | 	"NMI_INTERRUPT_HOST", | 
 | 	"NMI_INTERRUPT_ACTION_PT", | 
 | 	"NMI_INTERRUPT_UNKNOWN", | 
 | 	"UCODE_VERSION_MISMATCH", | 
 | 	"HW_ERROR_ABS_LOCK", | 
 | 	"HW_ERROR_CAL_LOCK_FAIL", | 
 | 	"NMI_INTERRUPT_INST_ACTION_PT", | 
 | 	"NMI_INTERRUPT_DATA_ACTION_PT", | 
 | 	"NMI_TRM_HW_ER", | 
 | 	"NMI_INTERRUPT_TRM", | 
 | 	"NMI_INTERRUPT_BREAK_POINT" | 
 | 	"DEBUG_0", | 
 | 	"DEBUG_1", | 
 | 	"DEBUG_2", | 
 | 	"DEBUG_3", | 
 | 	"UNKNOWN" | 
 | }; | 
 |  | 
 | static const char *desc_lookup(int i) | 
 | { | 
 | 	int max = ARRAY_SIZE(desc_lookup_text) - 1; | 
 |  | 
 | 	if (i < 0 || i > max) | 
 | 		i = max; | 
 |  | 
 | 	return desc_lookup_text[i]; | 
 | } | 
 |  | 
 | #define ERROR_START_OFFSET  (1 * sizeof(u32)) | 
 | #define ERROR_ELEM_SIZE     (7 * sizeof(u32)) | 
 |  | 
 | static void iwl_dump_nic_error_log(struct iwl_priv *priv) | 
 | { | 
 | 	u32 data2, line; | 
 | 	u32 desc, time, count, base, data1; | 
 | 	u32 blink1, blink2, ilink1, ilink2; | 
 |  | 
 | 	if (priv->ucode_type == UCODE_INIT) | 
 | 		base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr); | 
 | 	else | 
 | 		base = le32_to_cpu(priv->card_alive.error_event_table_ptr); | 
 |  | 
 | 	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { | 
 | 		IWL_ERR(priv, "Not valid error log pointer 0x%08X\n", base); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	count = iwl_read_targ_mem(priv, base); | 
 |  | 
 | 	if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) { | 
 | 		IWL_ERR(priv, "Start IWL Error Log Dump:\n"); | 
 | 		IWL_ERR(priv, "Status: 0x%08lX, count: %d\n", | 
 | 			priv->status, count); | 
 | 	} | 
 |  | 
 | 	desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32)); | 
 | 	blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32)); | 
 | 	blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32)); | 
 | 	ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32)); | 
 | 	ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32)); | 
 | 	data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32)); | 
 | 	data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32)); | 
 | 	line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32)); | 
 | 	time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32)); | 
 |  | 
 | 	IWL_ERR(priv, "Desc                               Time       " | 
 | 		"data1      data2      line\n"); | 
 | 	IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n", | 
 | 		desc_lookup(desc), desc, time, data1, data2, line); | 
 | 	IWL_ERR(priv, "blink1  blink2  ilink1  ilink2\n"); | 
 | 	IWL_ERR(priv, "0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2, | 
 | 		ilink1, ilink2); | 
 |  | 
 | } | 
 |  | 
 | #define EVENT_START_OFFSET  (4 * sizeof(u32)) | 
 |  | 
 | /** | 
 |  * iwl_print_event_log - Dump error event log to syslog | 
 |  * | 
 |  */ | 
 | static void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx, | 
 | 				u32 num_events, u32 mode) | 
 | { | 
 | 	u32 i; | 
 | 	u32 base;       /* SRAM byte address of event log header */ | 
 | 	u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */ | 
 | 	u32 ptr;        /* SRAM byte address of log data */ | 
 | 	u32 ev, time, data; /* event log data */ | 
 |  | 
 | 	if (num_events == 0) | 
 | 		return; | 
 | 	if (priv->ucode_type == UCODE_INIT) | 
 | 		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); | 
 | 	else | 
 | 		base = le32_to_cpu(priv->card_alive.log_event_table_ptr); | 
 |  | 
 | 	if (mode == 0) | 
 | 		event_size = 2 * sizeof(u32); | 
 | 	else | 
 | 		event_size = 3 * sizeof(u32); | 
 |  | 
 | 	ptr = base + EVENT_START_OFFSET + (start_idx * event_size); | 
 |  | 
 | 	/* "time" is actually "data" for mode 0 (no timestamp). | 
 | 	* place event id # at far right for easier visual parsing. */ | 
 | 	for (i = 0; i < num_events; i++) { | 
 | 		ev = iwl_read_targ_mem(priv, ptr); | 
 | 		ptr += sizeof(u32); | 
 | 		time = iwl_read_targ_mem(priv, ptr); | 
 | 		ptr += sizeof(u32); | 
 | 		if (mode == 0) { | 
 | 			/* data, ev */ | 
 | 			IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev); | 
 | 		} else { | 
 | 			data = iwl_read_targ_mem(priv, ptr); | 
 | 			ptr += sizeof(u32); | 
 | 			IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n", | 
 | 					time, data, ev); | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | void iwl_dump_nic_event_log(struct iwl_priv *priv) | 
 | { | 
 | 	u32 base;       /* SRAM byte address of event log header */ | 
 | 	u32 capacity;   /* event log capacity in # entries */ | 
 | 	u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */ | 
 | 	u32 num_wraps;  /* # times uCode wrapped to top of log */ | 
 | 	u32 next_entry; /* index of next entry to be written by uCode */ | 
 | 	u32 size;       /* # entries that we'll print */ | 
 |  | 
 | 	if (priv->ucode_type == UCODE_INIT) | 
 | 		base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr); | 
 | 	else | 
 | 		base = le32_to_cpu(priv->card_alive.log_event_table_ptr); | 
 |  | 
 | 	if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) { | 
 | 		IWL_ERR(priv, "Invalid event log pointer 0x%08X\n", base); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* event log header */ | 
 | 	capacity = iwl_read_targ_mem(priv, base); | 
 | 	mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32))); | 
 | 	num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32))); | 
 | 	next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32))); | 
 |  | 
 | 	size = num_wraps ? capacity : next_entry; | 
 |  | 
 | 	/* bail out if nothing in log */ | 
 | 	if (size == 0) { | 
 | 		IWL_ERR(priv, "Start IWL Event Log Dump: nothing in log\n"); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	IWL_ERR(priv, "Start IWL Event Log Dump: display count %d, wraps %d\n", | 
 | 			size, num_wraps); | 
 |  | 
 | 	/* if uCode has wrapped back to top of log, start at the oldest entry, | 
 | 	 * i.e the next one that uCode would fill. */ | 
 | 	if (num_wraps) | 
 | 		iwl_print_event_log(priv, next_entry, | 
 | 					capacity - next_entry, mode); | 
 | 	/* (then/else) start at top of log */ | 
 | 	iwl_print_event_log(priv, 0, next_entry, mode); | 
 |  | 
 | } | 
 | #endif | 
 | /** | 
 |  * iwl_irq_handle_error - called for HW or SW error interrupt from card | 
 |  */ | 
 | void iwl_irq_handle_error(struct iwl_priv *priv) | 
 | { | 
 | 	/* Set the FW error flag -- cleared on iwl_down */ | 
 | 	set_bit(STATUS_FW_ERROR, &priv->status); | 
 |  | 
 | 	/* Cancel currently queued command. */ | 
 | 	clear_bit(STATUS_HCMD_ACTIVE, &priv->status); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUG | 
 | 	if (iwl_get_debug_level(priv) & IWL_DL_FW_ERRORS) { | 
 | 		iwl_dump_nic_error_log(priv); | 
 | 		iwl_dump_nic_event_log(priv); | 
 | 		iwl_print_rx_config_cmd(priv); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	wake_up_interruptible(&priv->wait_command_queue); | 
 |  | 
 | 	/* Keep the restart process from trying to send host | 
 | 	 * commands by clearing the INIT status bit */ | 
 | 	clear_bit(STATUS_READY, &priv->status); | 
 |  | 
 | 	if (!test_bit(STATUS_EXIT_PENDING, &priv->status)) { | 
 | 		IWL_DEBUG(priv, IWL_DL_FW_ERRORS, | 
 | 			  "Restarting adapter due to uCode error.\n"); | 
 |  | 
 | 		if (priv->cfg->mod_params->restart_fw) | 
 | 			queue_work(priv->workqueue, &priv->restart); | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(iwl_irq_handle_error); | 
 |  | 
 | void iwl_configure_filter(struct ieee80211_hw *hw, | 
 | 			  unsigned int changed_flags, | 
 | 			  unsigned int *total_flags, | 
 | 			  u64 multicast) | 
 | { | 
 | 	struct iwl_priv *priv = hw->priv; | 
 | 	__le32 *filter_flags = &priv->staging_rxon.filter_flags; | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "Enter: changed: 0x%x, total: 0x%x\n", | 
 | 			changed_flags, *total_flags); | 
 |  | 
 | 	if (changed_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) { | 
 | 		if (*total_flags & (FIF_OTHER_BSS | FIF_PROMISC_IN_BSS)) | 
 | 			*filter_flags |= RXON_FILTER_PROMISC_MSK; | 
 | 		else | 
 | 			*filter_flags &= ~RXON_FILTER_PROMISC_MSK; | 
 | 	} | 
 | 	if (changed_flags & FIF_ALLMULTI) { | 
 | 		if (*total_flags & FIF_ALLMULTI) | 
 | 			*filter_flags |= RXON_FILTER_ACCEPT_GRP_MSK; | 
 | 		else | 
 | 			*filter_flags &= ~RXON_FILTER_ACCEPT_GRP_MSK; | 
 | 	} | 
 | 	if (changed_flags & FIF_CONTROL) { | 
 | 		if (*total_flags & FIF_CONTROL) | 
 | 			*filter_flags |= RXON_FILTER_CTL2HOST_MSK; | 
 | 		else | 
 | 			*filter_flags &= ~RXON_FILTER_CTL2HOST_MSK; | 
 | 	} | 
 | 	if (changed_flags & FIF_BCN_PRBRESP_PROMISC) { | 
 | 		if (*total_flags & FIF_BCN_PRBRESP_PROMISC) | 
 | 			*filter_flags |= RXON_FILTER_BCON_AWARE_MSK; | 
 | 		else | 
 | 			*filter_flags &= ~RXON_FILTER_BCON_AWARE_MSK; | 
 | 	} | 
 |  | 
 | 	/* We avoid iwl_commit_rxon here to commit the new filter flags | 
 | 	 * since mac80211 will call ieee80211_hw_config immediately. | 
 | 	 * (mc_list is not supported at this time). Otherwise, we need to | 
 | 	 * queue a background iwl_commit_rxon work. | 
 | 	 */ | 
 |  | 
 | 	*total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS | | 
 | 			FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL; | 
 | } | 
 | EXPORT_SYMBOL(iwl_configure_filter); | 
 |  | 
 | int iwl_setup_mac(struct iwl_priv *priv) | 
 | { | 
 | 	int ret; | 
 | 	struct ieee80211_hw *hw = priv->hw; | 
 | 	hw->rate_control_algorithm = "iwl-agn-rs"; | 
 |  | 
 | 	/* Tell mac80211 our characteristics */ | 
 | 	hw->flags = IEEE80211_HW_SIGNAL_DBM | | 
 | 		    IEEE80211_HW_NOISE_DBM | | 
 | 		    IEEE80211_HW_AMPDU_AGGREGATION | | 
 | 		    IEEE80211_HW_SPECTRUM_MGMT; | 
 |  | 
 | 	if (!priv->cfg->broken_powersave) | 
 | 		hw->flags |= IEEE80211_HW_SUPPORTS_PS | | 
 | 			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS; | 
 |  | 
 | 	hw->wiphy->interface_modes = | 
 | 		BIT(NL80211_IFTYPE_STATION) | | 
 | 		BIT(NL80211_IFTYPE_ADHOC); | 
 |  | 
 | 	hw->wiphy->custom_regulatory = true; | 
 |  | 
 | 	/* Firmware does not support this */ | 
 | 	hw->wiphy->disable_beacon_hints = true; | 
 |  | 
 | 	/* | 
 | 	 * For now, disable PS by default because it affects | 
 | 	 * RX performance significantly. | 
 | 	 */ | 
 | 	hw->wiphy->ps_default = false; | 
 |  | 
 | 	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX; | 
 | 	/* we create the 802.11 header and a zero-length SSID element */ | 
 | 	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2; | 
 |  | 
 | 	/* Default value; 4 EDCA QOS priorities */ | 
 | 	hw->queues = 4; | 
 |  | 
 | 	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL; | 
 |  | 
 | 	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels) | 
 | 		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = | 
 | 			&priv->bands[IEEE80211_BAND_2GHZ]; | 
 | 	if (priv->bands[IEEE80211_BAND_5GHZ].n_channels) | 
 | 		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = | 
 | 			&priv->bands[IEEE80211_BAND_5GHZ]; | 
 |  | 
 | 	ret = ieee80211_register_hw(priv->hw); | 
 | 	if (ret) { | 
 | 		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret); | 
 | 		return ret; | 
 | 	} | 
 | 	priv->mac80211_registered = 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_setup_mac); | 
 |  | 
 | int iwl_set_hw_params(struct iwl_priv *priv) | 
 | { | 
 | 	priv->hw_params.max_rxq_size = RX_QUEUE_SIZE; | 
 | 	priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG; | 
 | 	if (priv->cfg->mod_params->amsdu_size_8K) | 
 | 		priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K; | 
 | 	else | 
 | 		priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K; | 
 | 	priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256; | 
 |  | 
 | 	priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL; | 
 |  | 
 | 	if (priv->cfg->mod_params->disable_11n) | 
 | 		priv->cfg->sku &= ~IWL_SKU_N; | 
 |  | 
 | 	/* Device-specific setup */ | 
 | 	return priv->cfg->ops->lib->set_hw_params(priv); | 
 | } | 
 | EXPORT_SYMBOL(iwl_set_hw_params); | 
 |  | 
 | int iwl_init_drv(struct iwl_priv *priv) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	priv->ibss_beacon = NULL; | 
 |  | 
 | 	spin_lock_init(&priv->lock); | 
 | 	spin_lock_init(&priv->sta_lock); | 
 | 	spin_lock_init(&priv->hcmd_lock); | 
 |  | 
 | 	INIT_LIST_HEAD(&priv->free_frames); | 
 |  | 
 | 	mutex_init(&priv->mutex); | 
 |  | 
 | 	/* Clear the driver's (not device's) station table */ | 
 | 	iwl_clear_stations_table(priv); | 
 |  | 
 | 	priv->data_retry_limit = -1; | 
 | 	priv->ieee_channels = NULL; | 
 | 	priv->ieee_rates = NULL; | 
 | 	priv->band = IEEE80211_BAND_2GHZ; | 
 |  | 
 | 	priv->iw_mode = NL80211_IFTYPE_STATION; | 
 |  | 
 | 	priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED; | 
 |  | 
 | 	/* Choose which receivers/antennas to use */ | 
 | 	if (priv->cfg->ops->hcmd->set_rxon_chain) | 
 | 		priv->cfg->ops->hcmd->set_rxon_chain(priv); | 
 |  | 
 | 	iwl_init_scan_params(priv); | 
 |  | 
 | 	iwl_reset_qos(priv); | 
 |  | 
 | 	priv->qos_data.qos_active = 0; | 
 | 	priv->qos_data.qos_cap.val = 0; | 
 |  | 
 | 	priv->rates_mask = IWL_RATES_MASK; | 
 | 	/* Set the tx_power_user_lmt to the lowest power level | 
 | 	 * this value will get overwritten by channel max power avg | 
 | 	 * from eeprom */ | 
 | 	priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MIN; | 
 |  | 
 | 	ret = iwl_init_channel_map(priv); | 
 | 	if (ret) { | 
 | 		IWL_ERR(priv, "initializing regulatory failed: %d\n", ret); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	ret = iwlcore_init_geos(priv); | 
 | 	if (ret) { | 
 | 		IWL_ERR(priv, "initializing geos failed: %d\n", ret); | 
 | 		goto err_free_channel_map; | 
 | 	} | 
 | 	iwlcore_init_hw_rates(priv, priv->ieee_rates); | 
 |  | 
 | 	return 0; | 
 |  | 
 | err_free_channel_map: | 
 | 	iwl_free_channel_map(priv); | 
 | err: | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(iwl_init_drv); | 
 |  | 
 | int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force) | 
 | { | 
 | 	int ret = 0; | 
 | 	s8 prev_tx_power = priv->tx_power_user_lmt; | 
 |  | 
 | 	if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) { | 
 | 		IWL_WARN(priv, "Requested user TXPOWER %d below lower limit %d.\n", | 
 | 			 tx_power, | 
 | 			 IWL_TX_POWER_TARGET_POWER_MIN); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (tx_power > priv->tx_power_device_lmt) { | 
 | 		IWL_WARN(priv, | 
 | 			"Requested user TXPOWER %d above upper limit %d.\n", | 
 | 			 tx_power, priv->tx_power_device_lmt); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	if (priv->tx_power_user_lmt != tx_power) | 
 | 		force = true; | 
 |  | 
 | 	/* if nic is not up don't send command */ | 
 | 	if (iwl_is_ready_rf(priv)) { | 
 | 		priv->tx_power_user_lmt = tx_power; | 
 | 		if (force && priv->cfg->ops->lib->send_tx_power) | 
 | 			ret = priv->cfg->ops->lib->send_tx_power(priv); | 
 | 		else if (!priv->cfg->ops->lib->send_tx_power) | 
 | 			ret = -EOPNOTSUPP; | 
 | 		/* | 
 | 		 * if fail to set tx_power, restore the orig. tx power | 
 | 		 */ | 
 | 		if (ret) | 
 | 			priv->tx_power_user_lmt = prev_tx_power; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Even this is an async host command, the command | 
 | 	 * will always report success from uCode | 
 | 	 * So once driver can placing the command into the queue | 
 | 	 * successfully, driver can use priv->tx_power_user_lmt | 
 | 	 * to reflect the current tx power | 
 | 	 */ | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(iwl_set_tx_power); | 
 |  | 
 | void iwl_uninit_drv(struct iwl_priv *priv) | 
 | { | 
 | 	iwl_calib_free_results(priv); | 
 | 	iwlcore_free_geos(priv); | 
 | 	iwl_free_channel_map(priv); | 
 | 	kfree(priv->scan); | 
 | } | 
 | EXPORT_SYMBOL(iwl_uninit_drv); | 
 |  | 
 | #define ICT_COUNT (PAGE_SIZE/sizeof(u32)) | 
 |  | 
 | /* Free dram table */ | 
 | void iwl_free_isr_ict(struct iwl_priv *priv) | 
 | { | 
 | 	if (priv->ict_tbl_vir) { | 
 | 		pci_free_consistent(priv->pci_dev, (sizeof(u32) * ICT_COUNT) + | 
 | 					PAGE_SIZE, priv->ict_tbl_vir, | 
 | 					priv->ict_tbl_dma); | 
 | 		priv->ict_tbl_vir = NULL; | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(iwl_free_isr_ict); | 
 |  | 
 |  | 
 | /* allocate dram shared table it is a PAGE_SIZE aligned | 
 |  * also reset all data related to ICT table interrupt. | 
 |  */ | 
 | int iwl_alloc_isr_ict(struct iwl_priv *priv) | 
 | { | 
 |  | 
 | 	if (priv->cfg->use_isr_legacy) | 
 | 		return 0; | 
 | 	/* allocate shrared data table */ | 
 | 	priv->ict_tbl_vir = pci_alloc_consistent(priv->pci_dev, (sizeof(u32) * | 
 | 						  ICT_COUNT) + PAGE_SIZE, | 
 | 						  &priv->ict_tbl_dma); | 
 | 	if (!priv->ict_tbl_vir) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	/* align table to PAGE_SIZE boundry */ | 
 | 	priv->aligned_ict_tbl_dma = ALIGN(priv->ict_tbl_dma, PAGE_SIZE); | 
 |  | 
 | 	IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n", | 
 | 			     (unsigned long long)priv->ict_tbl_dma, | 
 | 			     (unsigned long long)priv->aligned_ict_tbl_dma, | 
 | 			(int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma)); | 
 |  | 
 | 	priv->ict_tbl =  priv->ict_tbl_vir + | 
 | 			  (priv->aligned_ict_tbl_dma - priv->ict_tbl_dma); | 
 |  | 
 | 	IWL_DEBUG_ISR(priv, "ict vir addr %p vir aligned %p diff %d\n", | 
 | 			     priv->ict_tbl, priv->ict_tbl_vir, | 
 | 			(int)(priv->aligned_ict_tbl_dma - priv->ict_tbl_dma)); | 
 |  | 
 | 	/* reset table and index to all 0 */ | 
 | 	memset(priv->ict_tbl_vir,0, (sizeof(u32) * ICT_COUNT) + PAGE_SIZE); | 
 | 	priv->ict_index = 0; | 
 |  | 
 | 	/* add periodic RX interrupt */ | 
 | 	priv->inta_mask |= CSR_INT_BIT_RX_PERIODIC; | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_alloc_isr_ict); | 
 |  | 
 | /* Device is going up inform it about using ICT interrupt table, | 
 |  * also we need to tell the driver to start using ICT interrupt. | 
 |  */ | 
 | int iwl_reset_ict(struct iwl_priv *priv) | 
 | { | 
 | 	u32 val; | 
 | 	unsigned long flags; | 
 |  | 
 | 	if (!priv->ict_tbl_vir) | 
 | 		return 0; | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 | 	iwl_disable_interrupts(priv); | 
 |  | 
 | 	memset(&priv->ict_tbl[0], 0, sizeof(u32) * ICT_COUNT); | 
 |  | 
 | 	val = priv->aligned_ict_tbl_dma >> PAGE_SHIFT; | 
 |  | 
 | 	val |= CSR_DRAM_INT_TBL_ENABLE; | 
 | 	val |= CSR_DRAM_INIT_TBL_WRAP_CHECK; | 
 |  | 
 | 	IWL_DEBUG_ISR(priv, "CSR_DRAM_INT_TBL_REG =0x%X " | 
 | 			"aligned dma address %Lx\n", | 
 | 			val, (unsigned long long)priv->aligned_ict_tbl_dma); | 
 |  | 
 | 	iwl_write32(priv, CSR_DRAM_INT_TBL_REG, val); | 
 | 	priv->use_ict = true; | 
 | 	priv->ict_index = 0; | 
 | 	iwl_write32(priv, CSR_INT, priv->inta_mask); | 
 | 	iwl_enable_interrupts(priv); | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_reset_ict); | 
 |  | 
 | /* Device is going down disable ict interrupt usage */ | 
 | void iwl_disable_ict(struct iwl_priv *priv) | 
 | { | 
 | 	unsigned long flags; | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 | 	priv->use_ict = false; | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 | } | 
 | EXPORT_SYMBOL(iwl_disable_ict); | 
 |  | 
 | /* interrupt handler using ict table, with this interrupt driver will | 
 |  * stop using INTA register to get device's interrupt, reading this register | 
 |  * is expensive, device will write interrupts in ICT dram table, increment | 
 |  * index then will fire interrupt to driver, driver will OR all ICT table | 
 |  * entries from current index up to table entry with 0 value. the result is | 
 |  * the interrupt we need to service, driver will set the entries back to 0 and | 
 |  * set index. | 
 |  */ | 
 | irqreturn_t iwl_isr_ict(int irq, void *data) | 
 | { | 
 | 	struct iwl_priv *priv = data; | 
 | 	u32 inta, inta_mask; | 
 | 	u32 val = 0; | 
 |  | 
 | 	if (!priv) | 
 | 		return IRQ_NONE; | 
 |  | 
 | 	/* dram interrupt table not set yet, | 
 | 	 * use legacy interrupt. | 
 | 	 */ | 
 | 	if (!priv->use_ict) | 
 | 		return iwl_isr(irq, data); | 
 |  | 
 | 	spin_lock(&priv->lock); | 
 |  | 
 | 	/* Disable (but don't clear!) interrupts here to avoid | 
 | 	 * back-to-back ISRs and sporadic interrupts from our NIC. | 
 | 	 * If we have something to service, the tasklet will re-enable ints. | 
 | 	 * If we *don't* have something, we'll re-enable before leaving here. | 
 | 	 */ | 
 | 	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */ | 
 | 	iwl_write32(priv, CSR_INT_MASK, 0x00000000); | 
 |  | 
 |  | 
 | 	/* Ignore interrupt if there's nothing in NIC to service. | 
 | 	 * This may be due to IRQ shared with another device, | 
 | 	 * or due to sporadic interrupts thrown from our NIC. */ | 
 | 	if (!priv->ict_tbl[priv->ict_index]) { | 
 | 		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n"); | 
 | 		goto none; | 
 | 	} | 
 |  | 
 | 	/* read all entries that not 0 start with ict_index */ | 
 | 	while (priv->ict_tbl[priv->ict_index]) { | 
 |  | 
 | 		val |= le32_to_cpu(priv->ict_tbl[priv->ict_index]); | 
 | 		IWL_DEBUG_ISR(priv, "ICT index %d value 0x%08X\n", | 
 | 				priv->ict_index, | 
 | 				le32_to_cpu(priv->ict_tbl[priv->ict_index])); | 
 | 		priv->ict_tbl[priv->ict_index] = 0; | 
 | 		priv->ict_index = iwl_queue_inc_wrap(priv->ict_index, | 
 | 						     ICT_COUNT); | 
 |  | 
 | 	} | 
 |  | 
 | 	/* We should not get this value, just ignore it. */ | 
 | 	if (val == 0xffffffff) | 
 | 		val = 0; | 
 |  | 
 | 	inta = (0xff & val) | ((0xff00 & val) << 16); | 
 | 	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x ict 0x%08x\n", | 
 | 			inta, inta_mask, val); | 
 |  | 
 | 	inta &= priv->inta_mask; | 
 | 	priv->inta |= inta; | 
 |  | 
 | 	/* iwl_irq_tasklet() will service interrupts and re-enable them */ | 
 | 	if (likely(inta)) | 
 | 		tasklet_schedule(&priv->irq_tasklet); | 
 | 	else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) { | 
 | 		/* Allow interrupt if was disabled by this handler and | 
 | 		 * no tasklet was schedules, We should not enable interrupt, | 
 | 		 * tasklet will enable it. | 
 | 		 */ | 
 | 		iwl_enable_interrupts(priv); | 
 | 	} | 
 |  | 
 | 	spin_unlock(&priv->lock); | 
 | 	return IRQ_HANDLED; | 
 |  | 
 |  none: | 
 | 	/* re-enable interrupts here since we don't have anything to service. | 
 | 	 * only Re-enable if disabled by irq. | 
 | 	 */ | 
 | 	if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) | 
 | 		iwl_enable_interrupts(priv); | 
 |  | 
 | 	spin_unlock(&priv->lock); | 
 | 	return IRQ_NONE; | 
 | } | 
 | EXPORT_SYMBOL(iwl_isr_ict); | 
 |  | 
 |  | 
 | static irqreturn_t iwl_isr(int irq, void *data) | 
 | { | 
 | 	struct iwl_priv *priv = data; | 
 | 	u32 inta, inta_mask; | 
 | #ifdef CONFIG_IWLWIFI_DEBUG | 
 | 	u32 inta_fh; | 
 | #endif | 
 | 	if (!priv) | 
 | 		return IRQ_NONE; | 
 |  | 
 | 	spin_lock(&priv->lock); | 
 |  | 
 | 	/* Disable (but don't clear!) interrupts here to avoid | 
 | 	 *    back-to-back ISRs and sporadic interrupts from our NIC. | 
 | 	 * If we have something to service, the tasklet will re-enable ints. | 
 | 	 * If we *don't* have something, we'll re-enable before leaving here. */ | 
 | 	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */ | 
 | 	iwl_write32(priv, CSR_INT_MASK, 0x00000000); | 
 |  | 
 | 	/* Discover which interrupts are active/pending */ | 
 | 	inta = iwl_read32(priv, CSR_INT); | 
 |  | 
 | 	/* Ignore interrupt if there's nothing in NIC to service. | 
 | 	 * This may be due to IRQ shared with another device, | 
 | 	 * or due to sporadic interrupts thrown from our NIC. */ | 
 | 	if (!inta) { | 
 | 		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0\n"); | 
 | 		goto none; | 
 | 	} | 
 |  | 
 | 	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { | 
 | 		/* Hardware disappeared. It might have already raised | 
 | 		 * an interrupt */ | 
 | 		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta); | 
 | 		goto unplugged; | 
 | 	} | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUG | 
 | 	if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) { | 
 | 		inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); | 
 | 		IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, " | 
 | 			      "fh 0x%08x\n", inta, inta_mask, inta_fh); | 
 | 	} | 
 | #endif | 
 |  | 
 | 	priv->inta |= inta; | 
 | 	/* iwl_irq_tasklet() will service interrupts and re-enable them */ | 
 | 	if (likely(inta)) | 
 | 		tasklet_schedule(&priv->irq_tasklet); | 
 | 	else if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) | 
 | 		iwl_enable_interrupts(priv); | 
 |  | 
 |  unplugged: | 
 | 	spin_unlock(&priv->lock); | 
 | 	return IRQ_HANDLED; | 
 |  | 
 |  none: | 
 | 	/* re-enable interrupts here since we don't have anything to service. */ | 
 | 	/* only Re-enable if diabled by irq  and no schedules tasklet. */ | 
 | 	if (test_bit(STATUS_INT_ENABLED, &priv->status) && !priv->inta) | 
 | 		iwl_enable_interrupts(priv); | 
 |  | 
 | 	spin_unlock(&priv->lock); | 
 | 	return IRQ_NONE; | 
 | } | 
 |  | 
 | irqreturn_t iwl_isr_legacy(int irq, void *data) | 
 | { | 
 | 	struct iwl_priv *priv = data; | 
 | 	u32 inta, inta_mask; | 
 | 	u32 inta_fh; | 
 | 	if (!priv) | 
 | 		return IRQ_NONE; | 
 |  | 
 | 	spin_lock(&priv->lock); | 
 |  | 
 | 	/* Disable (but don't clear!) interrupts here to avoid | 
 | 	 *    back-to-back ISRs and sporadic interrupts from our NIC. | 
 | 	 * If we have something to service, the tasklet will re-enable ints. | 
 | 	 * If we *don't* have something, we'll re-enable before leaving here. */ | 
 | 	inta_mask = iwl_read32(priv, CSR_INT_MASK);  /* just for debug */ | 
 | 	iwl_write32(priv, CSR_INT_MASK, 0x00000000); | 
 |  | 
 | 	/* Discover which interrupts are active/pending */ | 
 | 	inta = iwl_read32(priv, CSR_INT); | 
 | 	inta_fh = iwl_read32(priv, CSR_FH_INT_STATUS); | 
 |  | 
 | 	/* Ignore interrupt if there's nothing in NIC to service. | 
 | 	 * This may be due to IRQ shared with another device, | 
 | 	 * or due to sporadic interrupts thrown from our NIC. */ | 
 | 	if (!inta && !inta_fh) { | 
 | 		IWL_DEBUG_ISR(priv, "Ignore interrupt, inta == 0, inta_fh == 0\n"); | 
 | 		goto none; | 
 | 	} | 
 |  | 
 | 	if ((inta == 0xFFFFFFFF) || ((inta & 0xFFFFFFF0) == 0xa5a5a5a0)) { | 
 | 		/* Hardware disappeared. It might have already raised | 
 | 		 * an interrupt */ | 
 | 		IWL_WARN(priv, "HARDWARE GONE?? INTA == 0x%08x\n", inta); | 
 | 		goto unplugged; | 
 | 	} | 
 |  | 
 | 	IWL_DEBUG_ISR(priv, "ISR inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", | 
 | 		      inta, inta_mask, inta_fh); | 
 |  | 
 | 	inta &= ~CSR_INT_BIT_SCD; | 
 |  | 
 | 	/* iwl_irq_tasklet() will service interrupts and re-enable them */ | 
 | 	if (likely(inta || inta_fh)) | 
 | 		tasklet_schedule(&priv->irq_tasklet); | 
 |  | 
 |  unplugged: | 
 | 	spin_unlock(&priv->lock); | 
 | 	return IRQ_HANDLED; | 
 |  | 
 |  none: | 
 | 	/* re-enable interrupts here since we don't have anything to service. */ | 
 | 	/* only Re-enable if diabled by irq */ | 
 | 	if (test_bit(STATUS_INT_ENABLED, &priv->status)) | 
 | 		iwl_enable_interrupts(priv); | 
 | 	spin_unlock(&priv->lock); | 
 | 	return IRQ_NONE; | 
 | } | 
 | EXPORT_SYMBOL(iwl_isr_legacy); | 
 |  | 
 | int iwl_send_bt_config(struct iwl_priv *priv) | 
 | { | 
 | 	struct iwl_bt_cmd bt_cmd = { | 
 | 		.flags = 3, | 
 | 		.lead_time = 0xAA, | 
 | 		.max_kill = 1, | 
 | 		.kill_ack_mask = 0, | 
 | 		.kill_cts_mask = 0, | 
 | 	}; | 
 |  | 
 | 	return iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, | 
 | 				sizeof(struct iwl_bt_cmd), &bt_cmd); | 
 | } | 
 | EXPORT_SYMBOL(iwl_send_bt_config); | 
 |  | 
 | int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags) | 
 | { | 
 | 	u32 stat_flags = 0; | 
 | 	struct iwl_host_cmd cmd = { | 
 | 		.id = REPLY_STATISTICS_CMD, | 
 | 		.flags = flags, | 
 | 		.len = sizeof(stat_flags), | 
 | 		.data = (u8 *) &stat_flags, | 
 | 	}; | 
 | 	return iwl_send_cmd(priv, &cmd); | 
 | } | 
 | EXPORT_SYMBOL(iwl_send_statistics_request); | 
 |  | 
 | /** | 
 |  * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host, | 
 |  *   using sample data 100 bytes apart.  If these sample points are good, | 
 |  *   it's a pretty good bet that everything between them is good, too. | 
 |  */ | 
 | static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len) | 
 | { | 
 | 	u32 val; | 
 | 	int ret = 0; | 
 | 	u32 errcnt = 0; | 
 | 	u32 i; | 
 |  | 
 | 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); | 
 |  | 
 | 	for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) { | 
 | 		/* read data comes through single port, auto-incr addr */ | 
 | 		/* NOTE: Use the debugless read so we don't flood kernel log | 
 | 		 * if IWL_DL_IO is set */ | 
 | 		iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, | 
 | 			i + IWL49_RTC_INST_LOWER_BOUND); | 
 | 		val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); | 
 | 		if (val != le32_to_cpu(*image)) { | 
 | 			ret = -EIO; | 
 | 			errcnt++; | 
 | 			if (errcnt >= 3) | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host, | 
 |  *     looking at all data. | 
 |  */ | 
 | static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image, | 
 | 				 u32 len) | 
 | { | 
 | 	u32 val; | 
 | 	u32 save_len = len; | 
 | 	int ret = 0; | 
 | 	u32 errcnt; | 
 |  | 
 | 	IWL_DEBUG_INFO(priv, "ucode inst image size is %u\n", len); | 
 |  | 
 | 	iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, | 
 | 			   IWL49_RTC_INST_LOWER_BOUND); | 
 |  | 
 | 	errcnt = 0; | 
 | 	for (; len > 0; len -= sizeof(u32), image++) { | 
 | 		/* read data comes through single port, auto-incr addr */ | 
 | 		/* NOTE: Use the debugless read so we don't flood kernel log | 
 | 		 * if IWL_DL_IO is set */ | 
 | 		val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT); | 
 | 		if (val != le32_to_cpu(*image)) { | 
 | 			IWL_ERR(priv, "uCode INST section is invalid at " | 
 | 				  "offset 0x%x, is 0x%x, s/b 0x%x\n", | 
 | 				  save_len - len, val, le32_to_cpu(*image)); | 
 | 			ret = -EIO; | 
 | 			errcnt++; | 
 | 			if (errcnt >= 20) | 
 | 				break; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	if (!errcnt) | 
 | 		IWL_DEBUG_INFO(priv, | 
 | 		    "ucode image in INSTRUCTION memory is good\n"); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | /** | 
 |  * iwl_verify_ucode - determine which instruction image is in SRAM, | 
 |  *    and verify its contents | 
 |  */ | 
 | int iwl_verify_ucode(struct iwl_priv *priv) | 
 | { | 
 | 	__le32 *image; | 
 | 	u32 len; | 
 | 	int ret; | 
 |  | 
 | 	/* Try bootstrap */ | 
 | 	image = (__le32 *)priv->ucode_boot.v_addr; | 
 | 	len = priv->ucode_boot.len; | 
 | 	ret = iwlcore_verify_inst_sparse(priv, image, len); | 
 | 	if (!ret) { | 
 | 		IWL_DEBUG_INFO(priv, "Bootstrap uCode is good in inst SRAM\n"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* Try initialize */ | 
 | 	image = (__le32 *)priv->ucode_init.v_addr; | 
 | 	len = priv->ucode_init.len; | 
 | 	ret = iwlcore_verify_inst_sparse(priv, image, len); | 
 | 	if (!ret) { | 
 | 		IWL_DEBUG_INFO(priv, "Initialize uCode is good in inst SRAM\n"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* Try runtime/protocol */ | 
 | 	image = (__le32 *)priv->ucode_code.v_addr; | 
 | 	len = priv->ucode_code.len; | 
 | 	ret = iwlcore_verify_inst_sparse(priv, image, len); | 
 | 	if (!ret) { | 
 | 		IWL_DEBUG_INFO(priv, "Runtime uCode is good in inst SRAM\n"); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	IWL_ERR(priv, "NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n"); | 
 |  | 
 | 	/* Since nothing seems to match, show first several data entries in | 
 | 	 * instruction SRAM, so maybe visual inspection will give a clue. | 
 | 	 * Selection of bootstrap image (vs. other images) is arbitrary. */ | 
 | 	image = (__le32 *)priv->ucode_boot.v_addr; | 
 | 	len = priv->ucode_boot.len; | 
 | 	ret = iwl_verify_inst_full(priv, image, len); | 
 |  | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(iwl_verify_ucode); | 
 |  | 
 |  | 
 | void iwl_rf_kill_ct_config(struct iwl_priv *priv) | 
 | { | 
 | 	struct iwl_ct_kill_config cmd; | 
 | 	struct iwl_ct_kill_throttling_config adv_cmd; | 
 | 	unsigned long flags; | 
 | 	int ret = 0; | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 | 	iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, | 
 | 		    CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT); | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 | 	priv->thermal_throttle.ct_kill_toggle = false; | 
 |  | 
 | 	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { | 
 | 	case CSR_HW_REV_TYPE_1000: | 
 | 	case CSR_HW_REV_TYPE_6x00: | 
 | 	case CSR_HW_REV_TYPE_6x50: | 
 | 		adv_cmd.critical_temperature_enter = | 
 | 			cpu_to_le32(priv->hw_params.ct_kill_threshold); | 
 | 		adv_cmd.critical_temperature_exit = | 
 | 			cpu_to_le32(priv->hw_params.ct_kill_exit_threshold); | 
 |  | 
 | 		ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, | 
 | 				       sizeof(adv_cmd), &adv_cmd); | 
 | 		if (ret) | 
 | 			IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); | 
 | 		else | 
 | 			IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " | 
 | 					"succeeded, " | 
 | 					"critical temperature enter is %d," | 
 | 					"exit is %d\n", | 
 | 				       priv->hw_params.ct_kill_threshold, | 
 | 				       priv->hw_params.ct_kill_exit_threshold); | 
 | 		break; | 
 | 	default: | 
 | 		cmd.critical_temperature_R = | 
 | 			cpu_to_le32(priv->hw_params.ct_kill_threshold); | 
 |  | 
 | 		ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD, | 
 | 				       sizeof(cmd), &cmd); | 
 | 		if (ret) | 
 | 			IWL_ERR(priv, "REPLY_CT_KILL_CONFIG_CMD failed\n"); | 
 | 		else | 
 | 			IWL_DEBUG_INFO(priv, "REPLY_CT_KILL_CONFIG_CMD " | 
 | 					"succeeded, " | 
 | 					"critical temperature is %d\n", | 
 | 					priv->hw_params.ct_kill_threshold); | 
 | 		break; | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(iwl_rf_kill_ct_config); | 
 |  | 
 |  | 
 | /* | 
 |  * CARD_STATE_CMD | 
 |  * | 
 |  * Use: Sets the device's internal card state to enable, disable, or halt | 
 |  * | 
 |  * When in the 'enable' state the card operates as normal. | 
 |  * When in the 'disable' state, the card enters into a low power mode. | 
 |  * When in the 'halt' state, the card is shut down and must be fully | 
 |  * restarted to come back on. | 
 |  */ | 
 | int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag) | 
 | { | 
 | 	struct iwl_host_cmd cmd = { | 
 | 		.id = REPLY_CARD_STATE_CMD, | 
 | 		.len = sizeof(u32), | 
 | 		.data = &flags, | 
 | 		.flags = meta_flag, | 
 | 	}; | 
 |  | 
 | 	return iwl_send_cmd(priv, &cmd); | 
 | } | 
 |  | 
 | void iwl_rx_pm_sleep_notif(struct iwl_priv *priv, | 
 | 			   struct iwl_rx_mem_buffer *rxb) | 
 | { | 
 | #ifdef CONFIG_IWLWIFI_DEBUG | 
 | 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; | 
 | 	struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif); | 
 | 	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n", | 
 | 		     sleep->pm_sleep_mode, sleep->pm_wakeup_src); | 
 | #endif | 
 | } | 
 | EXPORT_SYMBOL(iwl_rx_pm_sleep_notif); | 
 |  | 
 | void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv, | 
 | 				      struct iwl_rx_mem_buffer *rxb) | 
 | { | 
 | 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; | 
 | 	u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK; | 
 | 	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled " | 
 | 			"notification for %s:\n", len, | 
 | 			get_cmd_string(pkt->hdr.cmd)); | 
 | 	iwl_print_hex_dump(priv, IWL_DL_RADIO, pkt->u.raw, len); | 
 | } | 
 | EXPORT_SYMBOL(iwl_rx_pm_debug_statistics_notif); | 
 |  | 
 | void iwl_rx_reply_error(struct iwl_priv *priv, | 
 | 			struct iwl_rx_mem_buffer *rxb) | 
 | { | 
 | 	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; | 
 |  | 
 | 	IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) " | 
 | 		"seq 0x%04X ser 0x%08X\n", | 
 | 		le32_to_cpu(pkt->u.err_resp.error_type), | 
 | 		get_cmd_string(pkt->u.err_resp.cmd_id), | 
 | 		pkt->u.err_resp.cmd_id, | 
 | 		le16_to_cpu(pkt->u.err_resp.bad_cmd_seq_num), | 
 | 		le32_to_cpu(pkt->u.err_resp.error_info)); | 
 | } | 
 | EXPORT_SYMBOL(iwl_rx_reply_error); | 
 |  | 
 | void iwl_clear_isr_stats(struct iwl_priv *priv) | 
 | { | 
 | 	memset(&priv->isr_stats, 0, sizeof(priv->isr_stats)); | 
 | } | 
 |  | 
 | int iwl_mac_conf_tx(struct ieee80211_hw *hw, u16 queue, | 
 | 			   const struct ieee80211_tx_queue_params *params) | 
 | { | 
 | 	struct iwl_priv *priv = hw->priv; | 
 | 	unsigned long flags; | 
 | 	int q; | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "enter\n"); | 
 |  | 
 | 	if (!iwl_is_ready_rf(priv)) { | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (queue >= AC_NUM) { | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - queue >= AC_NUM %d\n", queue); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	q = AC_NUM - 1 - queue; | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 |  | 
 | 	priv->qos_data.def_qos_parm.ac[q].cw_min = cpu_to_le16(params->cw_min); | 
 | 	priv->qos_data.def_qos_parm.ac[q].cw_max = cpu_to_le16(params->cw_max); | 
 | 	priv->qos_data.def_qos_parm.ac[q].aifsn = params->aifs; | 
 | 	priv->qos_data.def_qos_parm.ac[q].edca_txop = | 
 | 			cpu_to_le16((params->txop * 32)); | 
 |  | 
 | 	priv->qos_data.def_qos_parm.ac[q].reserved1 = 0; | 
 | 	priv->qos_data.qos_active = 1; | 
 |  | 
 | 	if (priv->iw_mode == NL80211_IFTYPE_AP) | 
 | 		iwl_activate_qos(priv, 1); | 
 | 	else if (priv->assoc_id && iwl_is_associated(priv)) | 
 | 		iwl_activate_qos(priv, 0); | 
 |  | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "leave\n"); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_mac_conf_tx); | 
 |  | 
 | static void iwl_ht_conf(struct iwl_priv *priv, | 
 | 			    struct ieee80211_bss_conf *bss_conf) | 
 | { | 
 | 	struct ieee80211_sta_ht_cap *ht_conf; | 
 | 	struct iwl_ht_info *iwl_conf = &priv->current_ht_config; | 
 | 	struct ieee80211_sta *sta; | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "enter: \n"); | 
 |  | 
 | 	if (!iwl_conf->is_ht) | 
 | 		return; | 
 |  | 
 |  | 
 | 	/* | 
 | 	 * It is totally wrong to base global information on something | 
 | 	 * that is valid only when associated, alas, this driver works | 
 | 	 * that way and I don't know how to fix it. | 
 | 	 */ | 
 |  | 
 | 	rcu_read_lock(); | 
 | 	sta = ieee80211_find_sta(priv->hw, priv->bssid); | 
 | 	if (!sta) { | 
 | 		rcu_read_unlock(); | 
 | 		return; | 
 | 	} | 
 | 	ht_conf = &sta->ht_cap; | 
 |  | 
 | 	iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2); | 
 |  | 
 | 	memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16); | 
 |  | 
 | 	iwl_conf->ht_protection = | 
 | 		bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION; | 
 | 	iwl_conf->non_GF_STA_present = | 
 | 		!!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT); | 
 |  | 
 | 	rcu_read_unlock(); | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "leave\n"); | 
 | } | 
 |  | 
 | #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6) | 
 | void iwl_bss_info_changed(struct ieee80211_hw *hw, | 
 | 			  struct ieee80211_vif *vif, | 
 | 			  struct ieee80211_bss_conf *bss_conf, | 
 | 			  u32 changes) | 
 | { | 
 | 	struct iwl_priv *priv = hw->priv; | 
 | 	int ret; | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "changes = 0x%X\n", changes); | 
 |  | 
 | 	if (!iwl_is_alive(priv)) | 
 | 		return; | 
 |  | 
 | 	mutex_lock(&priv->mutex); | 
 |  | 
 | 	if (changes & BSS_CHANGED_BEACON && | 
 | 	    priv->iw_mode == NL80211_IFTYPE_AP) { | 
 | 		dev_kfree_skb(priv->ibss_beacon); | 
 | 		priv->ibss_beacon = ieee80211_beacon_get(hw, vif); | 
 | 	} | 
 |  | 
 | 	if (changes & BSS_CHANGED_BEACON_INT) { | 
 | 		priv->beacon_int = bss_conf->beacon_int; | 
 | 		/* TODO: in AP mode, do something to make this take effect */ | 
 | 	} | 
 |  | 
 | 	if (changes & BSS_CHANGED_BSSID) { | 
 | 		IWL_DEBUG_MAC80211(priv, "BSSID %pM\n", bss_conf->bssid); | 
 |  | 
 | 		/* | 
 | 		 * If there is currently a HW scan going on in the | 
 | 		 * background then we need to cancel it else the RXON | 
 | 		 * below/in post_associate will fail. | 
 | 		 */ | 
 | 		if (iwl_scan_cancel_timeout(priv, 100)) { | 
 | 			IWL_WARN(priv, "Aborted scan still in progress after 100ms\n"); | 
 | 			IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n"); | 
 | 			mutex_unlock(&priv->mutex); | 
 | 			return; | 
 | 		} | 
 |  | 
 | 		/* mac80211 only sets assoc when in STATION mode */ | 
 | 		if (priv->iw_mode == NL80211_IFTYPE_ADHOC || | 
 | 		    bss_conf->assoc) { | 
 | 			memcpy(priv->staging_rxon.bssid_addr, | 
 | 			       bss_conf->bssid, ETH_ALEN); | 
 |  | 
 | 			/* currently needed in a few places */ | 
 | 			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN); | 
 | 		} else { | 
 | 			priv->staging_rxon.filter_flags &= | 
 | 				~RXON_FILTER_ASSOC_MSK; | 
 | 		} | 
 |  | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * This needs to be after setting the BSSID in case | 
 | 	 * mac80211 decides to do both changes at once because | 
 | 	 * it will invoke post_associate. | 
 | 	 */ | 
 | 	if (priv->iw_mode == NL80211_IFTYPE_ADHOC && | 
 | 	    changes & BSS_CHANGED_BEACON) { | 
 | 		struct sk_buff *beacon = ieee80211_beacon_get(hw, vif); | 
 |  | 
 | 		if (beacon) | 
 | 			iwl_mac_beacon_update(hw, beacon); | 
 | 	} | 
 |  | 
 | 	if (changes & BSS_CHANGED_ERP_PREAMBLE) { | 
 | 		IWL_DEBUG_MAC80211(priv, "ERP_PREAMBLE %d\n", | 
 | 				   bss_conf->use_short_preamble); | 
 | 		if (bss_conf->use_short_preamble) | 
 | 			priv->staging_rxon.flags |= RXON_FLG_SHORT_PREAMBLE_MSK; | 
 | 		else | 
 | 			priv->staging_rxon.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK; | 
 | 	} | 
 |  | 
 | 	if (changes & BSS_CHANGED_ERP_CTS_PROT) { | 
 | 		IWL_DEBUG_MAC80211(priv, "ERP_CTS %d\n", bss_conf->use_cts_prot); | 
 | 		if (bss_conf->use_cts_prot && (priv->band != IEEE80211_BAND_5GHZ)) | 
 | 			priv->staging_rxon.flags |= RXON_FLG_TGG_PROTECT_MSK; | 
 | 		else | 
 | 			priv->staging_rxon.flags &= ~RXON_FLG_TGG_PROTECT_MSK; | 
 | 	} | 
 |  | 
 | 	if (changes & BSS_CHANGED_BASIC_RATES) { | 
 | 		/* XXX use this information | 
 | 		 * | 
 | 		 * To do that, remove code from iwl_set_rate() and put something | 
 | 		 * like this here: | 
 | 		 * | 
 | 		if (A-band) | 
 | 			priv->staging_rxon.ofdm_basic_rates = | 
 | 				bss_conf->basic_rates; | 
 | 		else | 
 | 			priv->staging_rxon.ofdm_basic_rates = | 
 | 				bss_conf->basic_rates >> 4; | 
 | 			priv->staging_rxon.cck_basic_rates = | 
 | 				bss_conf->basic_rates & 0xF; | 
 | 		 */ | 
 | 	} | 
 |  | 
 | 	if (changes & BSS_CHANGED_HT) { | 
 | 		iwl_ht_conf(priv, bss_conf); | 
 |  | 
 | 		if (priv->cfg->ops->hcmd->set_rxon_chain) | 
 | 			priv->cfg->ops->hcmd->set_rxon_chain(priv); | 
 | 	} | 
 |  | 
 | 	if (changes & BSS_CHANGED_ASSOC) { | 
 | 		IWL_DEBUG_MAC80211(priv, "ASSOC %d\n", bss_conf->assoc); | 
 | 		if (bss_conf->assoc) { | 
 | 			priv->assoc_id = bss_conf->aid; | 
 | 			priv->beacon_int = bss_conf->beacon_int; | 
 | 			priv->timestamp = bss_conf->timestamp; | 
 | 			priv->assoc_capability = bss_conf->assoc_capability; | 
 |  | 
 | 			/* | 
 | 			 * We have just associated, don't start scan too early | 
 | 			 * leave time for EAPOL exchange to complete. | 
 | 			 * | 
 | 			 * XXX: do this in mac80211 | 
 | 			 */ | 
 | 			priv->next_scan_jiffies = jiffies + | 
 | 					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC; | 
 | 			if (!iwl_is_rfkill(priv)) | 
 | 				priv->cfg->ops->lib->post_associate(priv); | 
 | 		} else | 
 | 			priv->assoc_id = 0; | 
 |  | 
 | 	} | 
 |  | 
 | 	if (changes && iwl_is_associated(priv) && priv->assoc_id) { | 
 | 		IWL_DEBUG_MAC80211(priv, "Changes (%#x) while associated\n", | 
 | 				   changes); | 
 | 		ret = iwl_send_rxon_assoc(priv); | 
 | 		if (!ret) { | 
 | 			/* Sync active_rxon with latest change. */ | 
 | 			memcpy((void *)&priv->active_rxon, | 
 | 				&priv->staging_rxon, | 
 | 				sizeof(struct iwl_rxon_cmd)); | 
 | 		} | 
 | 	} | 
 |  | 
 | 	mutex_unlock(&priv->mutex); | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "leave\n"); | 
 | } | 
 | EXPORT_SYMBOL(iwl_bss_info_changed); | 
 |  | 
 | int iwl_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb) | 
 | { | 
 | 	struct iwl_priv *priv = hw->priv; | 
 | 	unsigned long flags; | 
 | 	__le64 timestamp; | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "enter\n"); | 
 |  | 
 | 	if (!iwl_is_ready_rf(priv)) { | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - not IBSS\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 |  | 
 | 	if (priv->ibss_beacon) | 
 | 		dev_kfree_skb(priv->ibss_beacon); | 
 |  | 
 | 	priv->ibss_beacon = skb; | 
 |  | 
 | 	priv->assoc_id = 0; | 
 | 	timestamp = ((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp; | 
 | 	priv->timestamp = le64_to_cpu(timestamp); | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "leave\n"); | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 |  | 
 | 	iwl_reset_qos(priv); | 
 |  | 
 | 	priv->cfg->ops->lib->post_associate(priv); | 
 |  | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_mac_beacon_update); | 
 |  | 
 | int iwl_set_mode(struct iwl_priv *priv, int mode) | 
 | { | 
 | 	if (mode == NL80211_IFTYPE_ADHOC) { | 
 | 		const struct iwl_channel_info *ch_info; | 
 |  | 
 | 		ch_info = iwl_get_channel_info(priv, | 
 | 			priv->band, | 
 | 			le16_to_cpu(priv->staging_rxon.channel)); | 
 |  | 
 | 		if (!ch_info || !is_channel_ibss(ch_info)) { | 
 | 			IWL_ERR(priv, "channel %d not IBSS channel\n", | 
 | 				  le16_to_cpu(priv->staging_rxon.channel)); | 
 | 			return -EINVAL; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	iwl_connection_init_rx_config(priv, mode); | 
 |  | 
 | 	if (priv->cfg->ops->hcmd->set_rxon_chain) | 
 | 		priv->cfg->ops->hcmd->set_rxon_chain(priv); | 
 |  | 
 | 	memcpy(priv->staging_rxon.node_addr, priv->mac_addr, ETH_ALEN); | 
 |  | 
 | 	iwl_clear_stations_table(priv); | 
 |  | 
 | 	/* dont commit rxon if rf-kill is on*/ | 
 | 	if (!iwl_is_ready_rf(priv)) | 
 | 		return -EAGAIN; | 
 |  | 
 | 	iwlcore_commit_rxon(priv); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_set_mode); | 
 |  | 
 | int iwl_mac_add_interface(struct ieee80211_hw *hw, | 
 | 				 struct ieee80211_if_init_conf *conf) | 
 | { | 
 | 	struct iwl_priv *priv = hw->priv; | 
 | 	unsigned long flags; | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "enter: type %d\n", conf->type); | 
 |  | 
 | 	if (priv->vif) { | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - vif != NULL\n"); | 
 | 		return -EOPNOTSUPP; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 | 	priv->vif = conf->vif; | 
 | 	priv->iw_mode = conf->type; | 
 |  | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 |  | 
 | 	mutex_lock(&priv->mutex); | 
 |  | 
 | 	if (conf->mac_addr) { | 
 | 		IWL_DEBUG_MAC80211(priv, "Set %pM\n", conf->mac_addr); | 
 | 		memcpy(priv->mac_addr, conf->mac_addr, ETH_ALEN); | 
 | 	} | 
 |  | 
 | 	if (iwl_set_mode(priv, conf->type) == -EAGAIN) | 
 | 		/* we are not ready, will run again when ready */ | 
 | 		set_bit(STATUS_MODE_PENDING, &priv->status); | 
 |  | 
 | 	mutex_unlock(&priv->mutex); | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "leave\n"); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_mac_add_interface); | 
 |  | 
 | void iwl_mac_remove_interface(struct ieee80211_hw *hw, | 
 | 				     struct ieee80211_if_init_conf *conf) | 
 | { | 
 | 	struct iwl_priv *priv = hw->priv; | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "enter\n"); | 
 |  | 
 | 	mutex_lock(&priv->mutex); | 
 |  | 
 | 	if (iwl_is_ready_rf(priv)) { | 
 | 		iwl_scan_cancel_timeout(priv, 100); | 
 | 		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
 | 		iwlcore_commit_rxon(priv); | 
 | 	} | 
 | 	if (priv->vif == conf->vif) { | 
 | 		priv->vif = NULL; | 
 | 		memset(priv->bssid, 0, ETH_ALEN); | 
 | 	} | 
 | 	mutex_unlock(&priv->mutex); | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "leave\n"); | 
 |  | 
 | } | 
 | EXPORT_SYMBOL(iwl_mac_remove_interface); | 
 |  | 
 | /** | 
 |  * iwl_mac_config - mac80211 config callback | 
 |  * | 
 |  * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to | 
 |  * be set inappropriately and the driver currently sets the hardware up to | 
 |  * use it whenever needed. | 
 |  */ | 
 | int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) | 
 | { | 
 | 	struct iwl_priv *priv = hw->priv; | 
 | 	const struct iwl_channel_info *ch_info; | 
 | 	struct ieee80211_conf *conf = &hw->conf; | 
 | 	struct iwl_ht_info *ht_conf = &priv->current_ht_config; | 
 | 	unsigned long flags = 0; | 
 | 	int ret = 0; | 
 | 	u16 ch; | 
 | 	int scan_active = 0; | 
 |  | 
 | 	mutex_lock(&priv->mutex); | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n", | 
 | 					conf->channel->hw_value, changed); | 
 |  | 
 | 	if (unlikely(!priv->cfg->mod_params->disable_hw_scan && | 
 | 			test_bit(STATUS_SCANNING, &priv->status))) { | 
 | 		scan_active = 1; | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - scanning\n"); | 
 | 	} | 
 |  | 
 |  | 
 | 	/* during scanning mac80211 will delay channel setting until | 
 | 	 * scan finish with changed = 0 | 
 | 	 */ | 
 | 	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) { | 
 | 		if (scan_active) | 
 | 			goto set_ch_out; | 
 |  | 
 | 		ch = ieee80211_frequency_to_channel(conf->channel->center_freq); | 
 | 		ch_info = iwl_get_channel_info(priv, conf->channel->band, ch); | 
 | 		if (!is_channel_valid(ch_info)) { | 
 | 			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n"); | 
 | 			ret = -EINVAL; | 
 | 			goto set_ch_out; | 
 | 		} | 
 |  | 
 | 		if (priv->iw_mode == NL80211_IFTYPE_ADHOC && | 
 | 			!is_channel_ibss(ch_info)) { | 
 | 			IWL_ERR(priv, "channel %d in band %d not " | 
 | 				"IBSS channel\n", | 
 | 				conf->channel->hw_value, conf->channel->band); | 
 | 			ret = -EINVAL; | 
 | 			goto set_ch_out; | 
 | 		} | 
 |  | 
 | 		spin_lock_irqsave(&priv->lock, flags); | 
 |  | 
 | 		/* Configure HT40 channels */ | 
 | 		ht_conf->is_ht = conf_is_ht(conf); | 
 | 		if (ht_conf->is_ht) { | 
 | 			if (conf_is_ht40_minus(conf)) { | 
 | 				ht_conf->extension_chan_offset = | 
 | 					IEEE80211_HT_PARAM_CHA_SEC_BELOW; | 
 | 				ht_conf->supported_chan_width = | 
 | 					IWL_CHANNEL_WIDTH_40MHZ; | 
 | 			} else if (conf_is_ht40_plus(conf)) { | 
 | 				ht_conf->extension_chan_offset = | 
 | 					IEEE80211_HT_PARAM_CHA_SEC_ABOVE; | 
 | 				ht_conf->supported_chan_width = | 
 | 					IWL_CHANNEL_WIDTH_40MHZ; | 
 | 			} else { | 
 | 				ht_conf->extension_chan_offset = | 
 | 					IEEE80211_HT_PARAM_CHA_SEC_NONE; | 
 | 				ht_conf->supported_chan_width = | 
 | 					IWL_CHANNEL_WIDTH_20MHZ; | 
 | 			} | 
 | 		} else | 
 | 			ht_conf->supported_chan_width = IWL_CHANNEL_WIDTH_20MHZ; | 
 | 		/* Default to no protection. Protection mode will later be set | 
 | 		 * from BSS config in iwl_ht_conf */ | 
 | 		ht_conf->ht_protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE; | 
 |  | 
 | 		/* if we are switching from ht to 2.4 clear flags | 
 | 		 * from any ht related info since 2.4 does not | 
 | 		 * support ht */ | 
 | 		if ((le16_to_cpu(priv->staging_rxon.channel) != ch)) | 
 | 			priv->staging_rxon.flags = 0; | 
 |  | 
 | 		iwl_set_rxon_channel(priv, conf->channel); | 
 |  | 
 | 		iwl_set_flags_for_band(priv, conf->channel->band); | 
 | 		spin_unlock_irqrestore(&priv->lock, flags); | 
 |  set_ch_out: | 
 | 		/* The list of supported rates and rate mask can be different | 
 | 		 * for each band; since the band may have changed, reset | 
 | 		 * the rate mask to what mac80211 lists */ | 
 | 		iwl_set_rate(priv); | 
 | 	} | 
 |  | 
 | 	if (changed & IEEE80211_CONF_CHANGE_PS) { | 
 | 		ret = iwl_power_update_mode(priv, false); | 
 | 		if (ret) | 
 | 			IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n"); | 
 | 	} | 
 |  | 
 | 	if (changed & IEEE80211_CONF_CHANGE_POWER) { | 
 | 		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n", | 
 | 			priv->tx_power_user_lmt, conf->power_level); | 
 |  | 
 | 		iwl_set_tx_power(priv, conf->power_level, false); | 
 | 	} | 
 |  | 
 | 	/* call to ensure that 4965 rx_chain is set properly in monitor mode */ | 
 | 	if (priv->cfg->ops->hcmd->set_rxon_chain) | 
 | 		priv->cfg->ops->hcmd->set_rxon_chain(priv); | 
 |  | 
 | 	if (!iwl_is_ready(priv)) { | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	if (scan_active) | 
 | 		goto out; | 
 |  | 
 | 	if (memcmp(&priv->active_rxon, | 
 | 		   &priv->staging_rxon, sizeof(priv->staging_rxon))) | 
 | 		iwlcore_commit_rxon(priv); | 
 | 	else | 
 | 		IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration.\n"); | 
 |  | 
 |  | 
 | out: | 
 | 	IWL_DEBUG_MAC80211(priv, "leave\n"); | 
 | 	mutex_unlock(&priv->mutex); | 
 | 	return ret; | 
 | } | 
 | EXPORT_SYMBOL(iwl_mac_config); | 
 |  | 
 | int iwl_mac_get_tx_stats(struct ieee80211_hw *hw, | 
 | 			 struct ieee80211_tx_queue_stats *stats) | 
 | { | 
 | 	struct iwl_priv *priv = hw->priv; | 
 | 	int i, avail; | 
 | 	struct iwl_tx_queue *txq; | 
 | 	struct iwl_queue *q; | 
 | 	unsigned long flags; | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "enter\n"); | 
 |  | 
 | 	if (!iwl_is_ready_rf(priv)) { | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - RF not ready\n"); | 
 | 		return -EIO; | 
 | 	} | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 |  | 
 | 	for (i = 0; i < AC_NUM; i++) { | 
 | 		txq = &priv->txq[i]; | 
 | 		q = &txq->q; | 
 | 		avail = iwl_queue_space(q); | 
 |  | 
 | 		stats[i].len = q->n_window - avail; | 
 | 		stats[i].limit = q->n_window - q->high_mark; | 
 | 		stats[i].count = q->n_window; | 
 |  | 
 | 	} | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "leave\n"); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_mac_get_tx_stats); | 
 |  | 
 | void iwl_mac_reset_tsf(struct ieee80211_hw *hw) | 
 | { | 
 | 	struct iwl_priv *priv = hw->priv; | 
 | 	unsigned long flags; | 
 |  | 
 | 	mutex_lock(&priv->mutex); | 
 | 	IWL_DEBUG_MAC80211(priv, "enter\n"); | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 | 	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info)); | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 |  | 
 | 	iwl_reset_qos(priv); | 
 |  | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 | 	priv->assoc_id = 0; | 
 | 	priv->assoc_capability = 0; | 
 | 	priv->assoc_station_added = 0; | 
 |  | 
 | 	/* new association get rid of ibss beacon skb */ | 
 | 	if (priv->ibss_beacon) | 
 | 		dev_kfree_skb(priv->ibss_beacon); | 
 |  | 
 | 	priv->ibss_beacon = NULL; | 
 |  | 
 | 	priv->beacon_int = priv->vif->bss_conf.beacon_int; | 
 | 	priv->timestamp = 0; | 
 | 	if ((priv->iw_mode == NL80211_IFTYPE_STATION)) | 
 | 		priv->beacon_int = 0; | 
 |  | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 |  | 
 | 	if (!iwl_is_ready_rf(priv)) { | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - not ready\n"); | 
 | 		mutex_unlock(&priv->mutex); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	/* we are restarting association process | 
 | 	 * clear RXON_FILTER_ASSOC_MSK bit | 
 | 	 */ | 
 | 	if (priv->iw_mode != NL80211_IFTYPE_AP) { | 
 | 		iwl_scan_cancel_timeout(priv, 100); | 
 | 		priv->staging_rxon.filter_flags &= ~RXON_FILTER_ASSOC_MSK; | 
 | 		iwlcore_commit_rxon(priv); | 
 | 	} | 
 |  | 
 | 	if (priv->iw_mode != NL80211_IFTYPE_ADHOC) { | 
 | 		IWL_DEBUG_MAC80211(priv, "leave - not in IBSS\n"); | 
 | 		mutex_unlock(&priv->mutex); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	iwl_set_rate(priv); | 
 |  | 
 | 	mutex_unlock(&priv->mutex); | 
 |  | 
 | 	IWL_DEBUG_MAC80211(priv, "leave\n"); | 
 | } | 
 | EXPORT_SYMBOL(iwl_mac_reset_tsf); | 
 |  | 
 | #ifdef CONFIG_IWLWIFI_DEBUGFS | 
 |  | 
 | #define IWL_TRAFFIC_DUMP_SIZE	(IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES) | 
 |  | 
 | void iwl_reset_traffic_log(struct iwl_priv *priv) | 
 | { | 
 | 	priv->tx_traffic_idx = 0; | 
 | 	priv->rx_traffic_idx = 0; | 
 | 	if (priv->tx_traffic) | 
 | 		memset(priv->tx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE); | 
 | 	if (priv->rx_traffic) | 
 | 		memset(priv->rx_traffic, 0, IWL_TRAFFIC_DUMP_SIZE); | 
 | } | 
 |  | 
 | int iwl_alloc_traffic_mem(struct iwl_priv *priv) | 
 | { | 
 | 	u32 traffic_size = IWL_TRAFFIC_DUMP_SIZE; | 
 |  | 
 | 	if (iwl_debug_level & IWL_DL_TX) { | 
 | 		if (!priv->tx_traffic) { | 
 | 			priv->tx_traffic = | 
 | 				kzalloc(traffic_size, GFP_KERNEL); | 
 | 			if (!priv->tx_traffic) | 
 | 				return -ENOMEM; | 
 | 		} | 
 | 	} | 
 | 	if (iwl_debug_level & IWL_DL_RX) { | 
 | 		if (!priv->rx_traffic) { | 
 | 			priv->rx_traffic = | 
 | 				kzalloc(traffic_size, GFP_KERNEL); | 
 | 			if (!priv->rx_traffic) | 
 | 				return -ENOMEM; | 
 | 		} | 
 | 	} | 
 | 	iwl_reset_traffic_log(priv); | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_alloc_traffic_mem); | 
 |  | 
 | void iwl_free_traffic_mem(struct iwl_priv *priv) | 
 | { | 
 | 	kfree(priv->tx_traffic); | 
 | 	priv->tx_traffic = NULL; | 
 |  | 
 | 	kfree(priv->rx_traffic); | 
 | 	priv->rx_traffic = NULL; | 
 | } | 
 | EXPORT_SYMBOL(iwl_free_traffic_mem); | 
 |  | 
 | void iwl_dbg_log_tx_data_frame(struct iwl_priv *priv, | 
 | 		      u16 length, struct ieee80211_hdr *header) | 
 | { | 
 | 	__le16 fc; | 
 | 	u16 len; | 
 |  | 
 | 	if (likely(!(iwl_debug_level & IWL_DL_TX))) | 
 | 		return; | 
 |  | 
 | 	if (!priv->tx_traffic) | 
 | 		return; | 
 |  | 
 | 	fc = header->frame_control; | 
 | 	if (ieee80211_is_data(fc)) { | 
 | 		len = (length > IWL_TRAFFIC_ENTRY_SIZE) | 
 | 		       ? IWL_TRAFFIC_ENTRY_SIZE : length; | 
 | 		memcpy((priv->tx_traffic + | 
 | 		       (priv->tx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)), | 
 | 		       header, len); | 
 | 		priv->tx_traffic_idx = | 
 | 			(priv->tx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(iwl_dbg_log_tx_data_frame); | 
 |  | 
 | void iwl_dbg_log_rx_data_frame(struct iwl_priv *priv, | 
 | 		      u16 length, struct ieee80211_hdr *header) | 
 | { | 
 | 	__le16 fc; | 
 | 	u16 len; | 
 |  | 
 | 	if (likely(!(iwl_debug_level & IWL_DL_RX))) | 
 | 		return; | 
 |  | 
 | 	if (!priv->rx_traffic) | 
 | 		return; | 
 |  | 
 | 	fc = header->frame_control; | 
 | 	if (ieee80211_is_data(fc)) { | 
 | 		len = (length > IWL_TRAFFIC_ENTRY_SIZE) | 
 | 		       ? IWL_TRAFFIC_ENTRY_SIZE : length; | 
 | 		memcpy((priv->rx_traffic + | 
 | 		       (priv->rx_traffic_idx * IWL_TRAFFIC_ENTRY_SIZE)), | 
 | 		       header, len); | 
 | 		priv->rx_traffic_idx = | 
 | 			(priv->rx_traffic_idx + 1) % IWL_TRAFFIC_ENTRIES; | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(iwl_dbg_log_rx_data_frame); | 
 |  | 
 | const char *get_mgmt_string(int cmd) | 
 | { | 
 | 	switch (cmd) { | 
 | 		IWL_CMD(MANAGEMENT_ASSOC_REQ); | 
 | 		IWL_CMD(MANAGEMENT_ASSOC_RESP); | 
 | 		IWL_CMD(MANAGEMENT_REASSOC_REQ); | 
 | 		IWL_CMD(MANAGEMENT_REASSOC_RESP); | 
 | 		IWL_CMD(MANAGEMENT_PROBE_REQ); | 
 | 		IWL_CMD(MANAGEMENT_PROBE_RESP); | 
 | 		IWL_CMD(MANAGEMENT_BEACON); | 
 | 		IWL_CMD(MANAGEMENT_ATIM); | 
 | 		IWL_CMD(MANAGEMENT_DISASSOC); | 
 | 		IWL_CMD(MANAGEMENT_AUTH); | 
 | 		IWL_CMD(MANAGEMENT_DEAUTH); | 
 | 		IWL_CMD(MANAGEMENT_ACTION); | 
 | 	default: | 
 | 		return "UNKNOWN"; | 
 |  | 
 | 	} | 
 | } | 
 |  | 
 | const char *get_ctrl_string(int cmd) | 
 | { | 
 | 	switch (cmd) { | 
 | 		IWL_CMD(CONTROL_BACK_REQ); | 
 | 		IWL_CMD(CONTROL_BACK); | 
 | 		IWL_CMD(CONTROL_PSPOLL); | 
 | 		IWL_CMD(CONTROL_RTS); | 
 | 		IWL_CMD(CONTROL_CTS); | 
 | 		IWL_CMD(CONTROL_ACK); | 
 | 		IWL_CMD(CONTROL_CFEND); | 
 | 		IWL_CMD(CONTROL_CFENDACK); | 
 | 	default: | 
 | 		return "UNKNOWN"; | 
 |  | 
 | 	} | 
 | } | 
 |  | 
 | void iwl_clear_tx_stats(struct iwl_priv *priv) | 
 | { | 
 | 	memset(&priv->tx_stats, 0, sizeof(struct traffic_stats)); | 
 |  | 
 | } | 
 |  | 
 | void iwl_clear_rx_stats(struct iwl_priv *priv) | 
 | { | 
 | 	memset(&priv->rx_stats, 0, sizeof(struct traffic_stats)); | 
 | } | 
 |  | 
 | /* | 
 |  * if CONFIG_IWLWIFI_DEBUGFS defined, iwl_update_stats function will | 
 |  * record all the MGMT, CTRL and DATA pkt for both TX and Rx pass. | 
 |  * Use debugFs to display the rx/rx_statistics | 
 |  * if CONFIG_IWLWIFI_DEBUGFS not being defined, then no MGMT and CTRL | 
 |  * information will be recorded, but DATA pkt still will be recorded | 
 |  * for the reason of iwl_led.c need to control the led blinking based on | 
 |  * number of tx and rx data. | 
 |  * | 
 |  */ | 
 | void iwl_update_stats(struct iwl_priv *priv, bool is_tx, __le16 fc, u16 len) | 
 | { | 
 | 	struct traffic_stats	*stats; | 
 |  | 
 | 	if (is_tx) | 
 | 		stats = &priv->tx_stats; | 
 | 	else | 
 | 		stats = &priv->rx_stats; | 
 |  | 
 | 	if (ieee80211_is_mgmt(fc)) { | 
 | 		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { | 
 | 		case cpu_to_le16(IEEE80211_STYPE_ASSOC_REQ): | 
 | 			stats->mgmt[MANAGEMENT_ASSOC_REQ]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_ASSOC_RESP): | 
 | 			stats->mgmt[MANAGEMENT_ASSOC_RESP]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_REASSOC_REQ): | 
 | 			stats->mgmt[MANAGEMENT_REASSOC_REQ]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_REASSOC_RESP): | 
 | 			stats->mgmt[MANAGEMENT_REASSOC_RESP]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ): | 
 | 			stats->mgmt[MANAGEMENT_PROBE_REQ]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_PROBE_RESP): | 
 | 			stats->mgmt[MANAGEMENT_PROBE_RESP]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_BEACON): | 
 | 			stats->mgmt[MANAGEMENT_BEACON]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_ATIM): | 
 | 			stats->mgmt[MANAGEMENT_ATIM]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_DISASSOC): | 
 | 			stats->mgmt[MANAGEMENT_DISASSOC]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_AUTH): | 
 | 			stats->mgmt[MANAGEMENT_AUTH]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_DEAUTH): | 
 | 			stats->mgmt[MANAGEMENT_DEAUTH]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_ACTION): | 
 | 			stats->mgmt[MANAGEMENT_ACTION]++; | 
 | 			break; | 
 | 		} | 
 | 	} else if (ieee80211_is_ctl(fc)) { | 
 | 		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) { | 
 | 		case cpu_to_le16(IEEE80211_STYPE_BACK_REQ): | 
 | 			stats->ctrl[CONTROL_BACK_REQ]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_BACK): | 
 | 			stats->ctrl[CONTROL_BACK]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_PSPOLL): | 
 | 			stats->ctrl[CONTROL_PSPOLL]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_RTS): | 
 | 			stats->ctrl[CONTROL_RTS]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_CTS): | 
 | 			stats->ctrl[CONTROL_CTS]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_ACK): | 
 | 			stats->ctrl[CONTROL_ACK]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_CFEND): | 
 | 			stats->ctrl[CONTROL_CFEND]++; | 
 | 			break; | 
 | 		case cpu_to_le16(IEEE80211_STYPE_CFENDACK): | 
 | 			stats->ctrl[CONTROL_CFENDACK]++; | 
 | 			break; | 
 | 		} | 
 | 	} else { | 
 | 		/* data */ | 
 | 		stats->data_cnt++; | 
 | 		stats->data_bytes += len; | 
 | 	} | 
 | } | 
 | EXPORT_SYMBOL(iwl_update_stats); | 
 | #endif | 
 |  | 
 | #ifdef CONFIG_PM | 
 |  | 
 | int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state) | 
 | { | 
 | 	struct iwl_priv *priv = pci_get_drvdata(pdev); | 
 |  | 
 | 	/* | 
 | 	 * This function is called when system goes into suspend state | 
 | 	 * mac80211 will call iwl_mac_stop() from the mac80211 suspend function | 
 | 	 * first but since iwl_mac_stop() has no knowledge of who the caller is, | 
 | 	 * it will not call apm_ops.stop() to stop the DMA operation. | 
 | 	 * Calling apm_ops.stop here to make sure we stop the DMA. | 
 | 	 */ | 
 | 	priv->cfg->ops->lib->apm_ops.stop(priv); | 
 |  | 
 | 	pci_save_state(pdev); | 
 | 	pci_disable_device(pdev); | 
 | 	pci_set_power_state(pdev, PCI_D3hot); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_pci_suspend); | 
 |  | 
 | int iwl_pci_resume(struct pci_dev *pdev) | 
 | { | 
 | 	struct iwl_priv *priv = pci_get_drvdata(pdev); | 
 | 	int ret; | 
 |  | 
 | 	pci_set_power_state(pdev, PCI_D0); | 
 | 	ret = pci_enable_device(pdev); | 
 | 	if (ret) | 
 | 		return ret; | 
 | 	pci_restore_state(pdev); | 
 | 	iwl_enable_interrupts(priv); | 
 |  | 
 | 	return 0; | 
 | } | 
 | EXPORT_SYMBOL(iwl_pci_resume); | 
 |  | 
 | #endif /* CONFIG_PM */ |