Documentation/devicetree/bindings/riscv/cpus.txt

===================
RISC-V CPU Bindings
===================

The device tree allows to describe the layout of CPUs in a system through
the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
defining properties for every cpu.

Bindings for CPU nodes follow the Devicetree Specification, available from:

https://www.devicetree.org/specifications/

with updates for 32-bit and 64-bit RISC-V systems provided in this document.

===========
Terminology
===========

This document uses some terminology common to the RISC-V community that is not
widely used, the definitions of which are listed here:

* hart: A hardware execution context, which contains all the state mandated by
  the RISC-V ISA: a PC and some registers.  This terminology is designed to
  disambiguate software's view of execution contexts from any particular
  microarchitectural implementation strategy.  For example, my Intel laptop is
  described as having one socket with two cores, each of which has two hyper
  threads.  Therefore this system has four harts.

=====================================
cpus and cpu node bindings definition
=====================================

The RISC-V architecture, in accordance with the Devicetree Specification,
requires the cpus and cpu nodes to be present and contain the properties
described below.

- cpus node

        Description: Container of cpu nodes

        The node name must be "cpus".

        A cpus node must define the following properties:

        - #address-cells
                Usage: required
                Value type: <u32>
                Definition: must be set to 1
        - #size-cells
                Usage: required
                Value type: <u32>
                Definition: must be set to 0

- cpu node

        Description: Describes a hart context

        PROPERTIES

        - device_type
                Usage: required
                Value type: <string>
                Definition: must be "cpu"
        - reg
                Usage: required
                Value type: <u32>
                Definition: The hart ID of this CPU node
        - compatible:
                Usage: required
                Value type: <stringlist>
                Definition: must contain "riscv", may contain one of
                            "sifive,rocket0"
        - mmu-type:
                Usage: optional
                Value type: <string>
                Definition: Specifies the CPU's MMU type.  Possible values are
                            "riscv,sv32"
                            "riscv,sv39"
                            "riscv,sv48"
        - riscv,isa:
                Usage: required
                Value type: <string>
                Definition: Contains the RISC-V ISA string of this hart.  These
                            ISA strings are defined by the RISC-V ISA manual.

Example: SiFive Freedom U540G Development Kit
---------------------------------------------

This system contains two harts: a hart marked as disabled that's used for
low-level system tasks and should be ignored by Linux, and a second hart that
Linux is allowed to run on.

        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
                timebase-frequency = <1000000>;
                cpu@0 {
                        clock-frequency = <1600000000>;
                        compatible = "sifive,rocket0", "riscv";
                        device_type = "cpu";
                        i-cache-block-size = <64>;
                        i-cache-sets = <128>;
                        i-cache-size = <16384>;
                        next-level-cache = <&L15 &L0>;
                        reg = <0>;
                        riscv,isa = "rv64imac";
                        status = "disabled";
                        L10: interrupt-controller {
                                #interrupt-cells = <1>;
                                compatible = "riscv,cpu-intc";
                                interrupt-controller;
                        };
                };
                cpu@1 {
                        clock-frequency = <1600000000>;
                        compatible = "sifive,rocket0", "riscv";
                        d-cache-block-size = <64>;
                        d-cache-sets = <64>;
                        d-cache-size = <32768>;
                        d-tlb-sets = <1>;
                        d-tlb-size = <32>;
                        device_type = "cpu";
                        i-cache-block-size = <64>;
                        i-cache-sets = <64>;
                        i-cache-size = <32768>;
                        i-tlb-sets = <1>;
                        i-tlb-size = <32>;
                        mmu-type = "riscv,sv39";
                        next-level-cache = <&L15 &L0>;
                        reg = <1>;
                        riscv,isa = "rv64imafdc";
                        status = "okay";
                        tlb-split;
                        L13: interrupt-controller {
                                #interrupt-cells = <1>;
                                compatible = "riscv,cpu-intc";
                                interrupt-controller;
                        };
                };
        };

Example: Spike ISA Simulator with 1 Hart
----------------------------------------

This device tree matches the Spike ISA golden model as run with `spike -p1`.

        cpus {
                cpu@0 {
                        device_type = "cpu";
                        reg = <0x00000000>;
                        status = "okay";
                        compatible = "riscv";
                        riscv,isa = "rv64imafdc";
                        mmu-type = "riscv,sv48";
                        clock-frequency = <0x3b9aca00>;
                        interrupt-controller {
                                #interrupt-cells = <0x00000001>;
                                interrupt-controller;
                                compatible = "riscv,cpu-intc";
                        }
                }
        }