| /* | 
 |  * Kernel Debug Core | 
 |  * | 
 |  * Maintainer: Jason Wessel <jason.wessel@windriver.com> | 
 |  * | 
 |  * Copyright (C) 2000-2001 VERITAS Software Corporation. | 
 |  * Copyright (C) 2002-2004 Timesys Corporation | 
 |  * Copyright (C) 2003-2004 Amit S. Kale <amitkale@linsyssoft.com> | 
 |  * Copyright (C) 2004 Pavel Machek <pavel@ucw.cz> | 
 |  * Copyright (C) 2004-2006 Tom Rini <trini@kernel.crashing.org> | 
 |  * Copyright (C) 2004-2006 LinSysSoft Technologies Pvt. Ltd. | 
 |  * Copyright (C) 2005-2009 Wind River Systems, Inc. | 
 |  * Copyright (C) 2007 MontaVista Software, Inc. | 
 |  * Copyright (C) 2008 Red Hat, Inc., Ingo Molnar <mingo@redhat.com> | 
 |  * | 
 |  * Contributors at various stages not listed above: | 
 |  *  Jason Wessel ( jason.wessel@windriver.com ) | 
 |  *  George Anzinger <george@mvista.com> | 
 |  *  Anurekh Saxena (anurekh.saxena@timesys.com) | 
 |  *  Lake Stevens Instrument Division (Glenn Engel) | 
 |  *  Jim Kingdon, Cygnus Support. | 
 |  * | 
 |  * Original KGDB stub: David Grothe <dave@gcom.com>, | 
 |  * Tigran Aivazian <tigran@sco.com> | 
 |  * | 
 |  * This file is licensed under the terms of the GNU General Public License | 
 |  * version 2. This program is licensed "as is" without any warranty of any | 
 |  * kind, whether express or implied. | 
 |  */ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/kgdb.h> | 
 | #include <linux/kdb.h> | 
 | #include <linux/reboot.h> | 
 | #include <linux/uaccess.h> | 
 | #include <asm/cacheflush.h> | 
 | #include <asm/unaligned.h> | 
 | #include "debug_core.h" | 
 |  | 
 | #define KGDB_MAX_THREAD_QUERY 17 | 
 |  | 
 | /* Our I/O buffers. */ | 
 | static char			remcom_in_buffer[BUFMAX]; | 
 | static char			remcom_out_buffer[BUFMAX]; | 
 | static int			gdbstub_use_prev_in_buf; | 
 | static int			gdbstub_prev_in_buf_pos; | 
 |  | 
 | /* Storage for the registers, in GDB format. */ | 
 | static unsigned long		gdb_regs[(NUMREGBYTES + | 
 | 					sizeof(unsigned long) - 1) / | 
 | 					sizeof(unsigned long)]; | 
 |  | 
 | /* | 
 |  * GDB remote protocol parser: | 
 |  */ | 
 |  | 
 | #ifdef CONFIG_KGDB_KDB | 
 | static int gdbstub_read_wait(void) | 
 | { | 
 | 	int ret = -1; | 
 | 	int i; | 
 |  | 
 | 	if (unlikely(gdbstub_use_prev_in_buf)) { | 
 | 		if (gdbstub_prev_in_buf_pos < gdbstub_use_prev_in_buf) | 
 | 			return remcom_in_buffer[gdbstub_prev_in_buf_pos++]; | 
 | 		else | 
 | 			gdbstub_use_prev_in_buf = 0; | 
 | 	} | 
 |  | 
 | 	/* poll any additional I/O interfaces that are defined */ | 
 | 	while (ret < 0) | 
 | 		for (i = 0; kdb_poll_funcs[i] != NULL; i++) { | 
 | 			ret = kdb_poll_funcs[i](); | 
 | 			if (ret > 0) | 
 | 				break; | 
 | 		} | 
 | 	return ret; | 
 | } | 
 | #else | 
 | static int gdbstub_read_wait(void) | 
 | { | 
 | 	int ret = dbg_io_ops->read_char(); | 
 | 	while (ret == NO_POLL_CHAR) | 
 | 		ret = dbg_io_ops->read_char(); | 
 | 	return ret; | 
 | } | 
 | #endif | 
 | /* scan for the sequence $<data>#<checksum> */ | 
 | static void get_packet(char *buffer) | 
 | { | 
 | 	unsigned char checksum; | 
 | 	unsigned char xmitcsum; | 
 | 	int count; | 
 | 	char ch; | 
 |  | 
 | 	do { | 
 | 		/* | 
 | 		 * Spin and wait around for the start character, ignore all | 
 | 		 * other characters: | 
 | 		 */ | 
 | 		while ((ch = (gdbstub_read_wait())) != '$') | 
 | 			/* nothing */; | 
 |  | 
 | 		kgdb_connected = 1; | 
 | 		checksum = 0; | 
 | 		xmitcsum = -1; | 
 |  | 
 | 		count = 0; | 
 |  | 
 | 		/* | 
 | 		 * now, read until a # or end of buffer is found: | 
 | 		 */ | 
 | 		while (count < (BUFMAX - 1)) { | 
 | 			ch = gdbstub_read_wait(); | 
 | 			if (ch == '#') | 
 | 				break; | 
 | 			checksum = checksum + ch; | 
 | 			buffer[count] = ch; | 
 | 			count = count + 1; | 
 | 		} | 
 |  | 
 | 		if (ch == '#') { | 
 | 			xmitcsum = hex_to_bin(gdbstub_read_wait()) << 4; | 
 | 			xmitcsum += hex_to_bin(gdbstub_read_wait()); | 
 |  | 
 | 			if (checksum != xmitcsum) | 
 | 				/* failed checksum */ | 
 | 				dbg_io_ops->write_char('-'); | 
 | 			else | 
 | 				/* successful transfer */ | 
 | 				dbg_io_ops->write_char('+'); | 
 | 			if (dbg_io_ops->flush) | 
 | 				dbg_io_ops->flush(); | 
 | 		} | 
 | 		buffer[count] = 0; | 
 | 	} while (checksum != xmitcsum); | 
 | } | 
 |  | 
 | /* | 
 |  * Send the packet in buffer. | 
 |  * Check for gdb connection if asked for. | 
 |  */ | 
 | static void put_packet(char *buffer) | 
 | { | 
 | 	unsigned char checksum; | 
 | 	int count; | 
 | 	char ch; | 
 |  | 
 | 	/* | 
 | 	 * $<packet info>#<checksum>. | 
 | 	 */ | 
 | 	while (1) { | 
 | 		dbg_io_ops->write_char('$'); | 
 | 		checksum = 0; | 
 | 		count = 0; | 
 |  | 
 | 		while ((ch = buffer[count])) { | 
 | 			dbg_io_ops->write_char(ch); | 
 | 			checksum += ch; | 
 | 			count++; | 
 | 		} | 
 |  | 
 | 		dbg_io_ops->write_char('#'); | 
 | 		dbg_io_ops->write_char(hex_asc_hi(checksum)); | 
 | 		dbg_io_ops->write_char(hex_asc_lo(checksum)); | 
 | 		if (dbg_io_ops->flush) | 
 | 			dbg_io_ops->flush(); | 
 |  | 
 | 		/* Now see what we get in reply. */ | 
 | 		ch = gdbstub_read_wait(); | 
 |  | 
 | 		if (ch == 3) | 
 | 			ch = gdbstub_read_wait(); | 
 |  | 
 | 		/* If we get an ACK, we are done. */ | 
 | 		if (ch == '+') | 
 | 			return; | 
 |  | 
 | 		/* | 
 | 		 * If we get the start of another packet, this means | 
 | 		 * that GDB is attempting to reconnect.  We will NAK | 
 | 		 * the packet being sent, and stop trying to send this | 
 | 		 * packet. | 
 | 		 */ | 
 | 		if (ch == '$') { | 
 | 			dbg_io_ops->write_char('-'); | 
 | 			if (dbg_io_ops->flush) | 
 | 				dbg_io_ops->flush(); | 
 | 			return; | 
 | 		} | 
 | 	} | 
 | } | 
 |  | 
 | static char gdbmsgbuf[BUFMAX + 1]; | 
 |  | 
 | void gdbstub_msg_write(const char *s, int len) | 
 | { | 
 | 	char *bufptr; | 
 | 	int wcount; | 
 | 	int i; | 
 |  | 
 | 	if (len == 0) | 
 | 		len = strlen(s); | 
 |  | 
 | 	/* 'O'utput */ | 
 | 	gdbmsgbuf[0] = 'O'; | 
 |  | 
 | 	/* Fill and send buffers... */ | 
 | 	while (len > 0) { | 
 | 		bufptr = gdbmsgbuf + 1; | 
 |  | 
 | 		/* Calculate how many this time */ | 
 | 		if ((len << 1) > (BUFMAX - 2)) | 
 | 			wcount = (BUFMAX - 2) >> 1; | 
 | 		else | 
 | 			wcount = len; | 
 |  | 
 | 		/* Pack in hex chars */ | 
 | 		for (i = 0; i < wcount; i++) | 
 | 			bufptr = hex_byte_pack(bufptr, s[i]); | 
 | 		*bufptr = '\0'; | 
 |  | 
 | 		/* Move up */ | 
 | 		s += wcount; | 
 | 		len -= wcount; | 
 |  | 
 | 		/* Write packet */ | 
 | 		put_packet(gdbmsgbuf); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * Convert the memory pointed to by mem into hex, placing result in | 
 |  * buf.  Return a pointer to the last char put in buf (null). May | 
 |  * return an error. | 
 |  */ | 
 | char *kgdb_mem2hex(char *mem, char *buf, int count) | 
 | { | 
 | 	char *tmp; | 
 | 	int err; | 
 |  | 
 | 	/* | 
 | 	 * We use the upper half of buf as an intermediate buffer for the | 
 | 	 * raw memory copy.  Hex conversion will work against this one. | 
 | 	 */ | 
 | 	tmp = buf + count; | 
 |  | 
 | 	err = probe_kernel_read(tmp, mem, count); | 
 | 	if (err) | 
 | 		return NULL; | 
 | 	while (count > 0) { | 
 | 		buf = hex_byte_pack(buf, *tmp); | 
 | 		tmp++; | 
 | 		count--; | 
 | 	} | 
 | 	*buf = 0; | 
 |  | 
 | 	return buf; | 
 | } | 
 |  | 
 | /* | 
 |  * Convert the hex array pointed to by buf into binary to be placed in | 
 |  * mem.  Return a pointer to the character AFTER the last byte | 
 |  * written.  May return an error. | 
 |  */ | 
 | int kgdb_hex2mem(char *buf, char *mem, int count) | 
 | { | 
 | 	char *tmp_raw; | 
 | 	char *tmp_hex; | 
 |  | 
 | 	/* | 
 | 	 * We use the upper half of buf as an intermediate buffer for the | 
 | 	 * raw memory that is converted from hex. | 
 | 	 */ | 
 | 	tmp_raw = buf + count * 2; | 
 |  | 
 | 	tmp_hex = tmp_raw - 1; | 
 | 	while (tmp_hex >= buf) { | 
 | 		tmp_raw--; | 
 | 		*tmp_raw = hex_to_bin(*tmp_hex--); | 
 | 		*tmp_raw |= hex_to_bin(*tmp_hex--) << 4; | 
 | 	} | 
 |  | 
 | 	return probe_kernel_write(mem, tmp_raw, count); | 
 | } | 
 |  | 
 | /* | 
 |  * While we find nice hex chars, build a long_val. | 
 |  * Return number of chars processed. | 
 |  */ | 
 | int kgdb_hex2long(char **ptr, unsigned long *long_val) | 
 | { | 
 | 	int hex_val; | 
 | 	int num = 0; | 
 | 	int negate = 0; | 
 |  | 
 | 	*long_val = 0; | 
 |  | 
 | 	if (**ptr == '-') { | 
 | 		negate = 1; | 
 | 		(*ptr)++; | 
 | 	} | 
 | 	while (**ptr) { | 
 | 		hex_val = hex_to_bin(**ptr); | 
 | 		if (hex_val < 0) | 
 | 			break; | 
 |  | 
 | 		*long_val = (*long_val << 4) | hex_val; | 
 | 		num++; | 
 | 		(*ptr)++; | 
 | 	} | 
 |  | 
 | 	if (negate) | 
 | 		*long_val = -*long_val; | 
 |  | 
 | 	return num; | 
 | } | 
 |  | 
 | /* | 
 |  * Copy the binary array pointed to by buf into mem.  Fix $, #, and | 
 |  * 0x7d escaped with 0x7d. Return -EFAULT on failure or 0 on success. | 
 |  * The input buf is overwitten with the result to write to mem. | 
 |  */ | 
 | static int kgdb_ebin2mem(char *buf, char *mem, int count) | 
 | { | 
 | 	int size = 0; | 
 | 	char *c = buf; | 
 |  | 
 | 	while (count-- > 0) { | 
 | 		c[size] = *buf++; | 
 | 		if (c[size] == 0x7d) | 
 | 			c[size] = *buf++ ^ 0x20; | 
 | 		size++; | 
 | 	} | 
 |  | 
 | 	return probe_kernel_write(mem, c, size); | 
 | } | 
 |  | 
 | #if DBG_MAX_REG_NUM > 0 | 
 | void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs) | 
 | { | 
 | 	int i; | 
 | 	int idx = 0; | 
 | 	char *ptr = (char *)gdb_regs; | 
 |  | 
 | 	for (i = 0; i < DBG_MAX_REG_NUM; i++) { | 
 | 		dbg_get_reg(i, ptr + idx, regs); | 
 | 		idx += dbg_reg_def[i].size; | 
 | 	} | 
 | } | 
 |  | 
 | void gdb_regs_to_pt_regs(unsigned long *gdb_regs, struct pt_regs *regs) | 
 | { | 
 | 	int i; | 
 | 	int idx = 0; | 
 | 	char *ptr = (char *)gdb_regs; | 
 |  | 
 | 	for (i = 0; i < DBG_MAX_REG_NUM; i++) { | 
 | 		dbg_set_reg(i, ptr + idx, regs); | 
 | 		idx += dbg_reg_def[i].size; | 
 | 	} | 
 | } | 
 | #endif /* DBG_MAX_REG_NUM > 0 */ | 
 |  | 
 | /* Write memory due to an 'M' or 'X' packet. */ | 
 | static int write_mem_msg(int binary) | 
 | { | 
 | 	char *ptr = &remcom_in_buffer[1]; | 
 | 	unsigned long addr; | 
 | 	unsigned long length; | 
 | 	int err; | 
 |  | 
 | 	if (kgdb_hex2long(&ptr, &addr) > 0 && *(ptr++) == ',' && | 
 | 	    kgdb_hex2long(&ptr, &length) > 0 && *(ptr++) == ':') { | 
 | 		if (binary) | 
 | 			err = kgdb_ebin2mem(ptr, (char *)addr, length); | 
 | 		else | 
 | 			err = kgdb_hex2mem(ptr, (char *)addr, length); | 
 | 		if (err) | 
 | 			return err; | 
 | 		if (CACHE_FLUSH_IS_SAFE) | 
 | 			flush_icache_range(addr, addr + length); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return -EINVAL; | 
 | } | 
 |  | 
 | static void error_packet(char *pkt, int error) | 
 | { | 
 | 	error = -error; | 
 | 	pkt[0] = 'E'; | 
 | 	pkt[1] = hex_asc[(error / 10)]; | 
 | 	pkt[2] = hex_asc[(error % 10)]; | 
 | 	pkt[3] = '\0'; | 
 | } | 
 |  | 
 | /* | 
 |  * Thread ID accessors. We represent a flat TID space to GDB, where | 
 |  * the per CPU idle threads (which under Linux all have PID 0) are | 
 |  * remapped to negative TIDs. | 
 |  */ | 
 |  | 
 | #define BUF_THREAD_ID_SIZE	8 | 
 |  | 
 | static char *pack_threadid(char *pkt, unsigned char *id) | 
 | { | 
 | 	unsigned char *limit; | 
 | 	int lzero = 1; | 
 |  | 
 | 	limit = id + (BUF_THREAD_ID_SIZE / 2); | 
 | 	while (id < limit) { | 
 | 		if (!lzero || *id != 0) { | 
 | 			pkt = hex_byte_pack(pkt, *id); | 
 | 			lzero = 0; | 
 | 		} | 
 | 		id++; | 
 | 	} | 
 |  | 
 | 	if (lzero) | 
 | 		pkt = hex_byte_pack(pkt, 0); | 
 |  | 
 | 	return pkt; | 
 | } | 
 |  | 
 | static void int_to_threadref(unsigned char *id, int value) | 
 | { | 
 | 	put_unaligned_be32(value, id); | 
 | } | 
 |  | 
 | static struct task_struct *getthread(struct pt_regs *regs, int tid) | 
 | { | 
 | 	/* | 
 | 	 * Non-positive TIDs are remapped to the cpu shadow information | 
 | 	 */ | 
 | 	if (tid == 0 || tid == -1) | 
 | 		tid = -atomic_read(&kgdb_active) - 2; | 
 | 	if (tid < -1 && tid > -NR_CPUS - 2) { | 
 | 		if (kgdb_info[-tid - 2].task) | 
 | 			return kgdb_info[-tid - 2].task; | 
 | 		else | 
 | 			return idle_task(-tid - 2); | 
 | 	} | 
 | 	if (tid <= 0) { | 
 | 		printk(KERN_ERR "KGDB: Internal thread select error\n"); | 
 | 		dump_stack(); | 
 | 		return NULL; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * find_task_by_pid_ns() does not take the tasklist lock anymore | 
 | 	 * but is nicely RCU locked - hence is a pretty resilient | 
 | 	 * thing to use: | 
 | 	 */ | 
 | 	return find_task_by_pid_ns(tid, &init_pid_ns); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * Remap normal tasks to their real PID, | 
 |  * CPU shadow threads are mapped to -CPU - 2 | 
 |  */ | 
 | static inline int shadow_pid(int realpid) | 
 | { | 
 | 	if (realpid) | 
 | 		return realpid; | 
 |  | 
 | 	return -raw_smp_processor_id() - 2; | 
 | } | 
 |  | 
 | /* | 
 |  * All the functions that start with gdb_cmd are the various | 
 |  * operations to implement the handlers for the gdbserial protocol | 
 |  * where KGDB is communicating with an external debugger | 
 |  */ | 
 |  | 
 | /* Handle the '?' status packets */ | 
 | static void gdb_cmd_status(struct kgdb_state *ks) | 
 | { | 
 | 	/* | 
 | 	 * We know that this packet is only sent | 
 | 	 * during initial connect.  So to be safe, | 
 | 	 * we clear out our breakpoints now in case | 
 | 	 * GDB is reconnecting. | 
 | 	 */ | 
 | 	dbg_remove_all_break(); | 
 |  | 
 | 	remcom_out_buffer[0] = 'S'; | 
 | 	hex_byte_pack(&remcom_out_buffer[1], ks->signo); | 
 | } | 
 |  | 
 | static void gdb_get_regs_helper(struct kgdb_state *ks) | 
 | { | 
 | 	struct task_struct *thread; | 
 | 	void *local_debuggerinfo; | 
 | 	int i; | 
 |  | 
 | 	thread = kgdb_usethread; | 
 | 	if (!thread) { | 
 | 		thread = kgdb_info[ks->cpu].task; | 
 | 		local_debuggerinfo = kgdb_info[ks->cpu].debuggerinfo; | 
 | 	} else { | 
 | 		local_debuggerinfo = NULL; | 
 | 		for_each_online_cpu(i) { | 
 | 			/* | 
 | 			 * Try to find the task on some other | 
 | 			 * or possibly this node if we do not | 
 | 			 * find the matching task then we try | 
 | 			 * to approximate the results. | 
 | 			 */ | 
 | 			if (thread == kgdb_info[i].task) | 
 | 				local_debuggerinfo = kgdb_info[i].debuggerinfo; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * All threads that don't have debuggerinfo should be | 
 | 	 * in schedule() sleeping, since all other CPUs | 
 | 	 * are in kgdb_wait, and thus have debuggerinfo. | 
 | 	 */ | 
 | 	if (local_debuggerinfo) { | 
 | 		pt_regs_to_gdb_regs(gdb_regs, local_debuggerinfo); | 
 | 	} else { | 
 | 		/* | 
 | 		 * Pull stuff saved during switch_to; nothing | 
 | 		 * else is accessible (or even particularly | 
 | 		 * relevant). | 
 | 		 * | 
 | 		 * This should be enough for a stack trace. | 
 | 		 */ | 
 | 		sleeping_thread_to_gdb_regs(gdb_regs, thread); | 
 | 	} | 
 | } | 
 |  | 
 | /* Handle the 'g' get registers request */ | 
 | static void gdb_cmd_getregs(struct kgdb_state *ks) | 
 | { | 
 | 	gdb_get_regs_helper(ks); | 
 | 	kgdb_mem2hex((char *)gdb_regs, remcom_out_buffer, NUMREGBYTES); | 
 | } | 
 |  | 
 | /* Handle the 'G' set registers request */ | 
 | static void gdb_cmd_setregs(struct kgdb_state *ks) | 
 | { | 
 | 	kgdb_hex2mem(&remcom_in_buffer[1], (char *)gdb_regs, NUMREGBYTES); | 
 |  | 
 | 	if (kgdb_usethread && kgdb_usethread != current) { | 
 | 		error_packet(remcom_out_buffer, -EINVAL); | 
 | 	} else { | 
 | 		gdb_regs_to_pt_regs(gdb_regs, ks->linux_regs); | 
 | 		strcpy(remcom_out_buffer, "OK"); | 
 | 	} | 
 | } | 
 |  | 
 | /* Handle the 'm' memory read bytes */ | 
 | static void gdb_cmd_memread(struct kgdb_state *ks) | 
 | { | 
 | 	char *ptr = &remcom_in_buffer[1]; | 
 | 	unsigned long length; | 
 | 	unsigned long addr; | 
 | 	char *err; | 
 |  | 
 | 	if (kgdb_hex2long(&ptr, &addr) > 0 && *ptr++ == ',' && | 
 | 					kgdb_hex2long(&ptr, &length) > 0) { | 
 | 		err = kgdb_mem2hex((char *)addr, remcom_out_buffer, length); | 
 | 		if (!err) | 
 | 			error_packet(remcom_out_buffer, -EINVAL); | 
 | 	} else { | 
 | 		error_packet(remcom_out_buffer, -EINVAL); | 
 | 	} | 
 | } | 
 |  | 
 | /* Handle the 'M' memory write bytes */ | 
 | static void gdb_cmd_memwrite(struct kgdb_state *ks) | 
 | { | 
 | 	int err = write_mem_msg(0); | 
 |  | 
 | 	if (err) | 
 | 		error_packet(remcom_out_buffer, err); | 
 | 	else | 
 | 		strcpy(remcom_out_buffer, "OK"); | 
 | } | 
 |  | 
 | #if DBG_MAX_REG_NUM > 0 | 
 | static char *gdb_hex_reg_helper(int regnum, char *out) | 
 | { | 
 | 	int i; | 
 | 	int offset = 0; | 
 |  | 
 | 	for (i = 0; i < regnum; i++) | 
 | 		offset += dbg_reg_def[i].size; | 
 | 	return kgdb_mem2hex((char *)gdb_regs + offset, out, | 
 | 			    dbg_reg_def[i].size); | 
 | } | 
 |  | 
 | /* Handle the 'p' individual regster get */ | 
 | static void gdb_cmd_reg_get(struct kgdb_state *ks) | 
 | { | 
 | 	unsigned long regnum; | 
 | 	char *ptr = &remcom_in_buffer[1]; | 
 |  | 
 | 	kgdb_hex2long(&ptr, ®num); | 
 | 	if (regnum >= DBG_MAX_REG_NUM) { | 
 | 		error_packet(remcom_out_buffer, -EINVAL); | 
 | 		return; | 
 | 	} | 
 | 	gdb_get_regs_helper(ks); | 
 | 	gdb_hex_reg_helper(regnum, remcom_out_buffer); | 
 | } | 
 |  | 
 | /* Handle the 'P' individual regster set */ | 
 | static void gdb_cmd_reg_set(struct kgdb_state *ks) | 
 | { | 
 | 	unsigned long regnum; | 
 | 	char *ptr = &remcom_in_buffer[1]; | 
 | 	int i = 0; | 
 |  | 
 | 	kgdb_hex2long(&ptr, ®num); | 
 | 	if (*ptr++ != '=' || | 
 | 	    !(!kgdb_usethread || kgdb_usethread == current) || | 
 | 	    !dbg_get_reg(regnum, gdb_regs, ks->linux_regs)) { | 
 | 		error_packet(remcom_out_buffer, -EINVAL); | 
 | 		return; | 
 | 	} | 
 | 	memset(gdb_regs, 0, sizeof(gdb_regs)); | 
 | 	while (i < sizeof(gdb_regs) * 2) | 
 | 		if (hex_to_bin(ptr[i]) >= 0) | 
 | 			i++; | 
 | 		else | 
 | 			break; | 
 | 	i = i / 2; | 
 | 	kgdb_hex2mem(ptr, (char *)gdb_regs, i); | 
 | 	dbg_set_reg(regnum, gdb_regs, ks->linux_regs); | 
 | 	strcpy(remcom_out_buffer, "OK"); | 
 | } | 
 | #endif /* DBG_MAX_REG_NUM > 0 */ | 
 |  | 
 | /* Handle the 'X' memory binary write bytes */ | 
 | static void gdb_cmd_binwrite(struct kgdb_state *ks) | 
 | { | 
 | 	int err = write_mem_msg(1); | 
 |  | 
 | 	if (err) | 
 | 		error_packet(remcom_out_buffer, err); | 
 | 	else | 
 | 		strcpy(remcom_out_buffer, "OK"); | 
 | } | 
 |  | 
 | /* Handle the 'D' or 'k', detach or kill packets */ | 
 | static void gdb_cmd_detachkill(struct kgdb_state *ks) | 
 | { | 
 | 	int error; | 
 |  | 
 | 	/* The detach case */ | 
 | 	if (remcom_in_buffer[0] == 'D') { | 
 | 		error = dbg_remove_all_break(); | 
 | 		if (error < 0) { | 
 | 			error_packet(remcom_out_buffer, error); | 
 | 		} else { | 
 | 			strcpy(remcom_out_buffer, "OK"); | 
 | 			kgdb_connected = 0; | 
 | 		} | 
 | 		put_packet(remcom_out_buffer); | 
 | 	} else { | 
 | 		/* | 
 | 		 * Assume the kill case, with no exit code checking, | 
 | 		 * trying to force detach the debugger: | 
 | 		 */ | 
 | 		dbg_remove_all_break(); | 
 | 		kgdb_connected = 0; | 
 | 	} | 
 | } | 
 |  | 
 | /* Handle the 'R' reboot packets */ | 
 | static int gdb_cmd_reboot(struct kgdb_state *ks) | 
 | { | 
 | 	/* For now, only honor R0 */ | 
 | 	if (strcmp(remcom_in_buffer, "R0") == 0) { | 
 | 		printk(KERN_CRIT "Executing emergency reboot\n"); | 
 | 		strcpy(remcom_out_buffer, "OK"); | 
 | 		put_packet(remcom_out_buffer); | 
 |  | 
 | 		/* | 
 | 		 * Execution should not return from | 
 | 		 * machine_emergency_restart() | 
 | 		 */ | 
 | 		machine_emergency_restart(); | 
 | 		kgdb_connected = 0; | 
 |  | 
 | 		return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* Handle the 'q' query packets */ | 
 | static void gdb_cmd_query(struct kgdb_state *ks) | 
 | { | 
 | 	struct task_struct *g; | 
 | 	struct task_struct *p; | 
 | 	unsigned char thref[BUF_THREAD_ID_SIZE]; | 
 | 	char *ptr; | 
 | 	int i; | 
 | 	int cpu; | 
 | 	int finished = 0; | 
 |  | 
 | 	switch (remcom_in_buffer[1]) { | 
 | 	case 's': | 
 | 	case 'f': | 
 | 		if (memcmp(remcom_in_buffer + 2, "ThreadInfo", 10)) | 
 | 			break; | 
 |  | 
 | 		i = 0; | 
 | 		remcom_out_buffer[0] = 'm'; | 
 | 		ptr = remcom_out_buffer + 1; | 
 | 		if (remcom_in_buffer[1] == 'f') { | 
 | 			/* Each cpu is a shadow thread */ | 
 | 			for_each_online_cpu(cpu) { | 
 | 				ks->thr_query = 0; | 
 | 				int_to_threadref(thref, -cpu - 2); | 
 | 				ptr = pack_threadid(ptr, thref); | 
 | 				*(ptr++) = ','; | 
 | 				i++; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		do_each_thread(g, p) { | 
 | 			if (i >= ks->thr_query && !finished) { | 
 | 				int_to_threadref(thref, p->pid); | 
 | 				ptr = pack_threadid(ptr, thref); | 
 | 				*(ptr++) = ','; | 
 | 				ks->thr_query++; | 
 | 				if (ks->thr_query % KGDB_MAX_THREAD_QUERY == 0) | 
 | 					finished = 1; | 
 | 			} | 
 | 			i++; | 
 | 		} while_each_thread(g, p); | 
 |  | 
 | 		*(--ptr) = '\0'; | 
 | 		break; | 
 |  | 
 | 	case 'C': | 
 | 		/* Current thread id */ | 
 | 		strcpy(remcom_out_buffer, "QC"); | 
 | 		ks->threadid = shadow_pid(current->pid); | 
 | 		int_to_threadref(thref, ks->threadid); | 
 | 		pack_threadid(remcom_out_buffer + 2, thref); | 
 | 		break; | 
 | 	case 'T': | 
 | 		if (memcmp(remcom_in_buffer + 1, "ThreadExtraInfo,", 16)) | 
 | 			break; | 
 |  | 
 | 		ks->threadid = 0; | 
 | 		ptr = remcom_in_buffer + 17; | 
 | 		kgdb_hex2long(&ptr, &ks->threadid); | 
 | 		if (!getthread(ks->linux_regs, ks->threadid)) { | 
 | 			error_packet(remcom_out_buffer, -EINVAL); | 
 | 			break; | 
 | 		} | 
 | 		if ((int)ks->threadid > 0) { | 
 | 			kgdb_mem2hex(getthread(ks->linux_regs, | 
 | 					ks->threadid)->comm, | 
 | 					remcom_out_buffer, 16); | 
 | 		} else { | 
 | 			static char tmpstr[23 + BUF_THREAD_ID_SIZE]; | 
 |  | 
 | 			sprintf(tmpstr, "shadowCPU%d", | 
 | 					(int)(-ks->threadid - 2)); | 
 | 			kgdb_mem2hex(tmpstr, remcom_out_buffer, strlen(tmpstr)); | 
 | 		} | 
 | 		break; | 
 | #ifdef CONFIG_KGDB_KDB | 
 | 	case 'R': | 
 | 		if (strncmp(remcom_in_buffer, "qRcmd,", 6) == 0) { | 
 | 			int len = strlen(remcom_in_buffer + 6); | 
 |  | 
 | 			if ((len % 2) != 0) { | 
 | 				strcpy(remcom_out_buffer, "E01"); | 
 | 				break; | 
 | 			} | 
 | 			kgdb_hex2mem(remcom_in_buffer + 6, | 
 | 				     remcom_out_buffer, len); | 
 | 			len = len / 2; | 
 | 			remcom_out_buffer[len++] = 0; | 
 |  | 
 | 			kdb_parse(remcom_out_buffer); | 
 | 			strcpy(remcom_out_buffer, "OK"); | 
 | 		} | 
 | 		break; | 
 | #endif | 
 | 	} | 
 | } | 
 |  | 
 | /* Handle the 'H' task query packets */ | 
 | static void gdb_cmd_task(struct kgdb_state *ks) | 
 | { | 
 | 	struct task_struct *thread; | 
 | 	char *ptr; | 
 |  | 
 | 	switch (remcom_in_buffer[1]) { | 
 | 	case 'g': | 
 | 		ptr = &remcom_in_buffer[2]; | 
 | 		kgdb_hex2long(&ptr, &ks->threadid); | 
 | 		thread = getthread(ks->linux_regs, ks->threadid); | 
 | 		if (!thread && ks->threadid > 0) { | 
 | 			error_packet(remcom_out_buffer, -EINVAL); | 
 | 			break; | 
 | 		} | 
 | 		kgdb_usethread = thread; | 
 | 		ks->kgdb_usethreadid = ks->threadid; | 
 | 		strcpy(remcom_out_buffer, "OK"); | 
 | 		break; | 
 | 	case 'c': | 
 | 		ptr = &remcom_in_buffer[2]; | 
 | 		kgdb_hex2long(&ptr, &ks->threadid); | 
 | 		if (!ks->threadid) { | 
 | 			kgdb_contthread = NULL; | 
 | 		} else { | 
 | 			thread = getthread(ks->linux_regs, ks->threadid); | 
 | 			if (!thread && ks->threadid > 0) { | 
 | 				error_packet(remcom_out_buffer, -EINVAL); | 
 | 				break; | 
 | 			} | 
 | 			kgdb_contthread = thread; | 
 | 		} | 
 | 		strcpy(remcom_out_buffer, "OK"); | 
 | 		break; | 
 | 	} | 
 | } | 
 |  | 
 | /* Handle the 'T' thread query packets */ | 
 | static void gdb_cmd_thread(struct kgdb_state *ks) | 
 | { | 
 | 	char *ptr = &remcom_in_buffer[1]; | 
 | 	struct task_struct *thread; | 
 |  | 
 | 	kgdb_hex2long(&ptr, &ks->threadid); | 
 | 	thread = getthread(ks->linux_regs, ks->threadid); | 
 | 	if (thread) | 
 | 		strcpy(remcom_out_buffer, "OK"); | 
 | 	else | 
 | 		error_packet(remcom_out_buffer, -EINVAL); | 
 | } | 
 |  | 
 | /* Handle the 'z' or 'Z' breakpoint remove or set packets */ | 
 | static void gdb_cmd_break(struct kgdb_state *ks) | 
 | { | 
 | 	/* | 
 | 	 * Since GDB-5.3, it's been drafted that '0' is a software | 
 | 	 * breakpoint, '1' is a hardware breakpoint, so let's do that. | 
 | 	 */ | 
 | 	char *bpt_type = &remcom_in_buffer[1]; | 
 | 	char *ptr = &remcom_in_buffer[2]; | 
 | 	unsigned long addr; | 
 | 	unsigned long length; | 
 | 	int error = 0; | 
 |  | 
 | 	if (arch_kgdb_ops.set_hw_breakpoint && *bpt_type >= '1') { | 
 | 		/* Unsupported */ | 
 | 		if (*bpt_type > '4') | 
 | 			return; | 
 | 	} else { | 
 | 		if (*bpt_type != '0' && *bpt_type != '1') | 
 | 			/* Unsupported. */ | 
 | 			return; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Test if this is a hardware breakpoint, and | 
 | 	 * if we support it: | 
 | 	 */ | 
 | 	if (*bpt_type == '1' && !(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT)) | 
 | 		/* Unsupported. */ | 
 | 		return; | 
 |  | 
 | 	if (*(ptr++) != ',') { | 
 | 		error_packet(remcom_out_buffer, -EINVAL); | 
 | 		return; | 
 | 	} | 
 | 	if (!kgdb_hex2long(&ptr, &addr)) { | 
 | 		error_packet(remcom_out_buffer, -EINVAL); | 
 | 		return; | 
 | 	} | 
 | 	if (*(ptr++) != ',' || | 
 | 		!kgdb_hex2long(&ptr, &length)) { | 
 | 		error_packet(remcom_out_buffer, -EINVAL); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	if (remcom_in_buffer[0] == 'Z' && *bpt_type == '0') | 
 | 		error = dbg_set_sw_break(addr); | 
 | 	else if (remcom_in_buffer[0] == 'z' && *bpt_type == '0') | 
 | 		error = dbg_remove_sw_break(addr); | 
 | 	else if (remcom_in_buffer[0] == 'Z') | 
 | 		error = arch_kgdb_ops.set_hw_breakpoint(addr, | 
 | 			(int)length, *bpt_type - '0'); | 
 | 	else if (remcom_in_buffer[0] == 'z') | 
 | 		error = arch_kgdb_ops.remove_hw_breakpoint(addr, | 
 | 			(int) length, *bpt_type - '0'); | 
 |  | 
 | 	if (error == 0) | 
 | 		strcpy(remcom_out_buffer, "OK"); | 
 | 	else | 
 | 		error_packet(remcom_out_buffer, error); | 
 | } | 
 |  | 
 | /* Handle the 'C' signal / exception passing packets */ | 
 | static int gdb_cmd_exception_pass(struct kgdb_state *ks) | 
 | { | 
 | 	/* C09 == pass exception | 
 | 	 * C15 == detach kgdb, pass exception | 
 | 	 */ | 
 | 	if (remcom_in_buffer[1] == '0' && remcom_in_buffer[2] == '9') { | 
 |  | 
 | 		ks->pass_exception = 1; | 
 | 		remcom_in_buffer[0] = 'c'; | 
 |  | 
 | 	} else if (remcom_in_buffer[1] == '1' && remcom_in_buffer[2] == '5') { | 
 |  | 
 | 		ks->pass_exception = 1; | 
 | 		remcom_in_buffer[0] = 'D'; | 
 | 		dbg_remove_all_break(); | 
 | 		kgdb_connected = 0; | 
 | 		return 1; | 
 |  | 
 | 	} else { | 
 | 		gdbstub_msg_write("KGDB only knows signal 9 (pass)" | 
 | 			" and 15 (pass and disconnect)\n" | 
 | 			"Executing a continue without signal passing\n", 0); | 
 | 		remcom_in_buffer[0] = 'c'; | 
 | 	} | 
 |  | 
 | 	/* Indicate fall through */ | 
 | 	return -1; | 
 | } | 
 |  | 
 | /* | 
 |  * This function performs all gdbserial command procesing | 
 |  */ | 
 | int gdb_serial_stub(struct kgdb_state *ks) | 
 | { | 
 | 	int error = 0; | 
 | 	int tmp; | 
 |  | 
 | 	/* Initialize comm buffer and globals. */ | 
 | 	memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); | 
 | 	kgdb_usethread = kgdb_info[ks->cpu].task; | 
 | 	ks->kgdb_usethreadid = shadow_pid(kgdb_info[ks->cpu].task->pid); | 
 | 	ks->pass_exception = 0; | 
 |  | 
 | 	if (kgdb_connected) { | 
 | 		unsigned char thref[BUF_THREAD_ID_SIZE]; | 
 | 		char *ptr; | 
 |  | 
 | 		/* Reply to host that an exception has occurred */ | 
 | 		ptr = remcom_out_buffer; | 
 | 		*ptr++ = 'T'; | 
 | 		ptr = hex_byte_pack(ptr, ks->signo); | 
 | 		ptr += strlen(strcpy(ptr, "thread:")); | 
 | 		int_to_threadref(thref, shadow_pid(current->pid)); | 
 | 		ptr = pack_threadid(ptr, thref); | 
 | 		*ptr++ = ';'; | 
 | 		put_packet(remcom_out_buffer); | 
 | 	} | 
 |  | 
 | 	while (1) { | 
 | 		error = 0; | 
 |  | 
 | 		/* Clear the out buffer. */ | 
 | 		memset(remcom_out_buffer, 0, sizeof(remcom_out_buffer)); | 
 |  | 
 | 		get_packet(remcom_in_buffer); | 
 |  | 
 | 		switch (remcom_in_buffer[0]) { | 
 | 		case '?': /* gdbserial status */ | 
 | 			gdb_cmd_status(ks); | 
 | 			break; | 
 | 		case 'g': /* return the value of the CPU registers */ | 
 | 			gdb_cmd_getregs(ks); | 
 | 			break; | 
 | 		case 'G': /* set the value of the CPU registers - return OK */ | 
 | 			gdb_cmd_setregs(ks); | 
 | 			break; | 
 | 		case 'm': /* mAA..AA,LLLL  Read LLLL bytes at address AA..AA */ | 
 | 			gdb_cmd_memread(ks); | 
 | 			break; | 
 | 		case 'M': /* MAA..AA,LLLL: Write LLLL bytes at address AA..AA */ | 
 | 			gdb_cmd_memwrite(ks); | 
 | 			break; | 
 | #if DBG_MAX_REG_NUM > 0 | 
 | 		case 'p': /* pXX Return gdb register XX (in hex) */ | 
 | 			gdb_cmd_reg_get(ks); | 
 | 			break; | 
 | 		case 'P': /* PXX=aaaa Set gdb register XX to aaaa (in hex) */ | 
 | 			gdb_cmd_reg_set(ks); | 
 | 			break; | 
 | #endif /* DBG_MAX_REG_NUM > 0 */ | 
 | 		case 'X': /* XAA..AA,LLLL: Write LLLL bytes at address AA..AA */ | 
 | 			gdb_cmd_binwrite(ks); | 
 | 			break; | 
 | 			/* kill or detach. KGDB should treat this like a | 
 | 			 * continue. | 
 | 			 */ | 
 | 		case 'D': /* Debugger detach */ | 
 | 		case 'k': /* Debugger detach via kill */ | 
 | 			gdb_cmd_detachkill(ks); | 
 | 			goto default_handle; | 
 | 		case 'R': /* Reboot */ | 
 | 			if (gdb_cmd_reboot(ks)) | 
 | 				goto default_handle; | 
 | 			break; | 
 | 		case 'q': /* query command */ | 
 | 			gdb_cmd_query(ks); | 
 | 			break; | 
 | 		case 'H': /* task related */ | 
 | 			gdb_cmd_task(ks); | 
 | 			break; | 
 | 		case 'T': /* Query thread status */ | 
 | 			gdb_cmd_thread(ks); | 
 | 			break; | 
 | 		case 'z': /* Break point remove */ | 
 | 		case 'Z': /* Break point set */ | 
 | 			gdb_cmd_break(ks); | 
 | 			break; | 
 | #ifdef CONFIG_KGDB_KDB | 
 | 		case '3': /* Escape into back into kdb */ | 
 | 			if (remcom_in_buffer[1] == '\0') { | 
 | 				gdb_cmd_detachkill(ks); | 
 | 				return DBG_PASS_EVENT; | 
 | 			} | 
 | #endif | 
 | 		case 'C': /* Exception passing */ | 
 | 			tmp = gdb_cmd_exception_pass(ks); | 
 | 			if (tmp > 0) | 
 | 				goto default_handle; | 
 | 			if (tmp == 0) | 
 | 				break; | 
 | 			/* Fall through on tmp < 0 */ | 
 | 		case 'c': /* Continue packet */ | 
 | 		case 's': /* Single step packet */ | 
 | 			if (kgdb_contthread && kgdb_contthread != current) { | 
 | 				/* Can't switch threads in kgdb */ | 
 | 				error_packet(remcom_out_buffer, -EINVAL); | 
 | 				break; | 
 | 			} | 
 | 			dbg_activate_sw_breakpoints(); | 
 | 			/* Fall through to default processing */ | 
 | 		default: | 
 | default_handle: | 
 | 			error = kgdb_arch_handle_exception(ks->ex_vector, | 
 | 						ks->signo, | 
 | 						ks->err_code, | 
 | 						remcom_in_buffer, | 
 | 						remcom_out_buffer, | 
 | 						ks->linux_regs); | 
 | 			/* | 
 | 			 * Leave cmd processing on error, detach, | 
 | 			 * kill, continue, or single step. | 
 | 			 */ | 
 | 			if (error >= 0 || remcom_in_buffer[0] == 'D' || | 
 | 			    remcom_in_buffer[0] == 'k') { | 
 | 				error = 0; | 
 | 				goto kgdb_exit; | 
 | 			} | 
 |  | 
 | 		} | 
 |  | 
 | 		/* reply to the request */ | 
 | 		put_packet(remcom_out_buffer); | 
 | 	} | 
 |  | 
 | kgdb_exit: | 
 | 	if (ks->pass_exception) | 
 | 		error = 1; | 
 | 	return error; | 
 | } | 
 |  | 
 | int gdbstub_state(struct kgdb_state *ks, char *cmd) | 
 | { | 
 | 	int error; | 
 |  | 
 | 	switch (cmd[0]) { | 
 | 	case 'e': | 
 | 		error = kgdb_arch_handle_exception(ks->ex_vector, | 
 | 						   ks->signo, | 
 | 						   ks->err_code, | 
 | 						   remcom_in_buffer, | 
 | 						   remcom_out_buffer, | 
 | 						   ks->linux_regs); | 
 | 		return error; | 
 | 	case 's': | 
 | 	case 'c': | 
 | 		strcpy(remcom_in_buffer, cmd); | 
 | 		return 0; | 
 | 	case '$': | 
 | 		strcpy(remcom_in_buffer, cmd); | 
 | 		gdbstub_use_prev_in_buf = strlen(remcom_in_buffer); | 
 | 		gdbstub_prev_in_buf_pos = 0; | 
 | 		return 0; | 
 | 	} | 
 | 	dbg_io_ops->write_char('+'); | 
 | 	put_packet(remcom_out_buffer); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /** | 
 |  * gdbstub_exit - Send an exit message to GDB | 
 |  * @status: The exit code to report. | 
 |  */ | 
 | void gdbstub_exit(int status) | 
 | { | 
 | 	unsigned char checksum, ch, buffer[3]; | 
 | 	int loop; | 
 |  | 
 | 	if (!kgdb_connected) | 
 | 		return; | 
 | 	kgdb_connected = 0; | 
 |  | 
 | 	if (!dbg_io_ops || dbg_kdb_mode) | 
 | 		return; | 
 |  | 
 | 	buffer[0] = 'W'; | 
 | 	buffer[1] = hex_asc_hi(status); | 
 | 	buffer[2] = hex_asc_lo(status); | 
 |  | 
 | 	dbg_io_ops->write_char('$'); | 
 | 	checksum = 0; | 
 |  | 
 | 	for (loop = 0; loop < 3; loop++) { | 
 | 		ch = buffer[loop]; | 
 | 		checksum += ch; | 
 | 		dbg_io_ops->write_char(ch); | 
 | 	} | 
 |  | 
 | 	dbg_io_ops->write_char('#'); | 
 | 	dbg_io_ops->write_char(hex_asc_hi(checksum)); | 
 | 	dbg_io_ops->write_char(hex_asc_lo(checksum)); | 
 |  | 
 | 	/* make sure the output is flushed, lest the bootloader clobber it */ | 
 | 	if (dbg_io_ops->flush) | 
 | 		dbg_io_ops->flush(); | 
 | } |