| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2000-2003,2005 Silicon Graphics, Inc. |
| * All Rights Reserved. |
| */ |
| #ifndef __XFS_LOG_FORMAT_H__ |
| #define __XFS_LOG_FORMAT_H__ |
| |
| struct xfs_mount; |
| struct xfs_trans_res; |
| |
| /* |
| * On-disk Log Format definitions. |
| * |
| * This file contains all the on-disk format definitions used within the log. It |
| * includes the physical log structure itself, as well as all the log item |
| * format structures that are written into the log and intepreted by log |
| * recovery. We start with the physical log format definitions, and then work |
| * through all the log items definitions and everything they encode into the |
| * log. |
| */ |
| typedef uint32_t xlog_tid_t; |
| |
| #define XLOG_MIN_ICLOGS 2 |
| #define XLOG_MAX_ICLOGS 8 |
| #define XLOG_HEADER_MAGIC_NUM 0xFEEDbabe /* Invalid cycle number */ |
| #define XLOG_VERSION_1 1 |
| #define XLOG_VERSION_2 2 /* Large IClogs, Log sunit */ |
| #define XLOG_VERSION_OKBITS (XLOG_VERSION_1 | XLOG_VERSION_2) |
| #define XLOG_MIN_RECORD_BSIZE (16*1024) /* eventually 32k */ |
| #define XLOG_BIG_RECORD_BSIZE (32*1024) /* 32k buffers */ |
| #define XLOG_MAX_RECORD_BSIZE (256*1024) |
| #define XLOG_HEADER_CYCLE_SIZE (32*1024) /* cycle data in header */ |
| #define XLOG_MIN_RECORD_BSHIFT 14 /* 16384 == 1 << 14 */ |
| #define XLOG_BIG_RECORD_BSHIFT 15 /* 32k == 1 << 15 */ |
| #define XLOG_MAX_RECORD_BSHIFT 18 /* 256k == 1 << 18 */ |
| #define XLOG_BTOLSUNIT(log, b) (((b)+(log)->l_mp->m_sb.sb_logsunit-1) / \ |
| (log)->l_mp->m_sb.sb_logsunit) |
| #define XLOG_LSUNITTOB(log, su) ((su) * (log)->l_mp->m_sb.sb_logsunit) |
| |
| #define XLOG_HEADER_SIZE 512 |
| |
| /* Minimum number of transactions that must fit in the log (defined by mkfs) */ |
| #define XFS_MIN_LOG_FACTOR 3 |
| |
| #define XLOG_REC_SHIFT(log) \ |
| BTOBB(1 << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \ |
| XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) |
| #define XLOG_TOTAL_REC_SHIFT(log) \ |
| BTOBB(XLOG_MAX_ICLOGS << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \ |
| XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT)) |
| |
| /* get lsn fields */ |
| #define CYCLE_LSN(lsn) ((uint)((lsn)>>32)) |
| #define BLOCK_LSN(lsn) ((uint)(lsn)) |
| |
| /* this is used in a spot where we might otherwise double-endian-flip */ |
| #define CYCLE_LSN_DISK(lsn) (((__be32 *)&(lsn))[0]) |
| |
| static inline xfs_lsn_t xlog_assign_lsn(uint cycle, uint block) |
| { |
| return ((xfs_lsn_t)cycle << 32) | block; |
| } |
| |
| static inline uint xlog_get_cycle(char *ptr) |
| { |
| if (be32_to_cpu(*(__be32 *)ptr) == XLOG_HEADER_MAGIC_NUM) |
| return be32_to_cpu(*((__be32 *)ptr + 1)); |
| else |
| return be32_to_cpu(*(__be32 *)ptr); |
| } |
| |
| /* Log Clients */ |
| #define XFS_TRANSACTION 0x69 |
| #define XFS_VOLUME 0x2 |
| #define XFS_LOG 0xaa |
| |
| #define XLOG_UNMOUNT_TYPE 0x556e /* Un for Unmount */ |
| |
| /* Region types for iovec's i_type */ |
| #define XLOG_REG_TYPE_BFORMAT 1 |
| #define XLOG_REG_TYPE_BCHUNK 2 |
| #define XLOG_REG_TYPE_EFI_FORMAT 3 |
| #define XLOG_REG_TYPE_EFD_FORMAT 4 |
| #define XLOG_REG_TYPE_IFORMAT 5 |
| #define XLOG_REG_TYPE_ICORE 6 |
| #define XLOG_REG_TYPE_IEXT 7 |
| #define XLOG_REG_TYPE_IBROOT 8 |
| #define XLOG_REG_TYPE_ILOCAL 9 |
| #define XLOG_REG_TYPE_IATTR_EXT 10 |
| #define XLOG_REG_TYPE_IATTR_BROOT 11 |
| #define XLOG_REG_TYPE_IATTR_LOCAL 12 |
| #define XLOG_REG_TYPE_QFORMAT 13 |
| #define XLOG_REG_TYPE_DQUOT 14 |
| #define XLOG_REG_TYPE_QUOTAOFF 15 |
| #define XLOG_REG_TYPE_LRHEADER 16 |
| #define XLOG_REG_TYPE_UNMOUNT 17 |
| #define XLOG_REG_TYPE_COMMIT 18 |
| #define XLOG_REG_TYPE_TRANSHDR 19 |
| #define XLOG_REG_TYPE_ICREATE 20 |
| #define XLOG_REG_TYPE_RUI_FORMAT 21 |
| #define XLOG_REG_TYPE_RUD_FORMAT 22 |
| #define XLOG_REG_TYPE_CUI_FORMAT 23 |
| #define XLOG_REG_TYPE_CUD_FORMAT 24 |
| #define XLOG_REG_TYPE_BUI_FORMAT 25 |
| #define XLOG_REG_TYPE_BUD_FORMAT 26 |
| #define XLOG_REG_TYPE_MAX 26 |
| |
| /* |
| * Flags to log operation header |
| * |
| * The first write of a new transaction will be preceded with a start |
| * record, XLOG_START_TRANS. Once a transaction is committed, a commit |
| * record is written, XLOG_COMMIT_TRANS. If a single region can not fit into |
| * the remainder of the current active in-core log, it is split up into |
| * multiple regions. Each partial region will be marked with a |
| * XLOG_CONTINUE_TRANS until the last one, which gets marked with XLOG_END_TRANS. |
| * |
| */ |
| #define XLOG_START_TRANS 0x01 /* Start a new transaction */ |
| #define XLOG_COMMIT_TRANS 0x02 /* Commit this transaction */ |
| #define XLOG_CONTINUE_TRANS 0x04 /* Cont this trans into new region */ |
| #define XLOG_WAS_CONT_TRANS 0x08 /* Cont this trans into new region */ |
| #define XLOG_END_TRANS 0x10 /* End a continued transaction */ |
| #define XLOG_UNMOUNT_TRANS 0x20 /* Unmount a filesystem transaction */ |
| |
| |
| typedef struct xlog_op_header { |
| __be32 oh_tid; /* transaction id of operation : 4 b */ |
| __be32 oh_len; /* bytes in data region : 4 b */ |
| __u8 oh_clientid; /* who sent me this : 1 b */ |
| __u8 oh_flags; /* : 1 b */ |
| __u16 oh_res2; /* 32 bit align : 2 b */ |
| } xlog_op_header_t; |
| |
| /* valid values for h_fmt */ |
| #define XLOG_FMT_UNKNOWN 0 |
| #define XLOG_FMT_LINUX_LE 1 |
| #define XLOG_FMT_LINUX_BE 2 |
| #define XLOG_FMT_IRIX_BE 3 |
| |
| /* our fmt */ |
| #ifdef XFS_NATIVE_HOST |
| #define XLOG_FMT XLOG_FMT_LINUX_BE |
| #else |
| #define XLOG_FMT XLOG_FMT_LINUX_LE |
| #endif |
| |
| typedef struct xlog_rec_header { |
| __be32 h_magicno; /* log record (LR) identifier : 4 */ |
| __be32 h_cycle; /* write cycle of log : 4 */ |
| __be32 h_version; /* LR version : 4 */ |
| __be32 h_len; /* len in bytes; should be 64-bit aligned: 4 */ |
| __be64 h_lsn; /* lsn of this LR : 8 */ |
| __be64 h_tail_lsn; /* lsn of 1st LR w/ buffers not committed: 8 */ |
| __le32 h_crc; /* crc of log record : 4 */ |
| __be32 h_prev_block; /* block number to previous LR : 4 */ |
| __be32 h_num_logops; /* number of log operations in this LR : 4 */ |
| __be32 h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; |
| /* new fields */ |
| __be32 h_fmt; /* format of log record : 4 */ |
| uuid_t h_fs_uuid; /* uuid of FS : 16 */ |
| __be32 h_size; /* iclog size : 4 */ |
| } xlog_rec_header_t; |
| |
| typedef struct xlog_rec_ext_header { |
| __be32 xh_cycle; /* write cycle of log : 4 */ |
| __be32 xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */ |
| } xlog_rec_ext_header_t; |
| |
| /* |
| * Quite misnamed, because this union lays out the actual on-disk log buffer. |
| */ |
| typedef union xlog_in_core2 { |
| xlog_rec_header_t hic_header; |
| xlog_rec_ext_header_t hic_xheader; |
| char hic_sector[XLOG_HEADER_SIZE]; |
| } xlog_in_core_2_t; |
| |
| /* not an on-disk structure, but needed by log recovery in userspace */ |
| typedef struct xfs_log_iovec { |
| void *i_addr; /* beginning address of region */ |
| int i_len; /* length in bytes of region */ |
| uint i_type; /* type of region */ |
| } xfs_log_iovec_t; |
| |
| |
| /* |
| * Transaction Header definitions. |
| * |
| * This is the structure written in the log at the head of every transaction. It |
| * identifies the type and id of the transaction, and contains the number of |
| * items logged by the transaction so we know how many to expect during |
| * recovery. |
| * |
| * Do not change the below structure without redoing the code in |
| * xlog_recover_add_to_trans() and xlog_recover_add_to_cont_trans(). |
| */ |
| typedef struct xfs_trans_header { |
| uint th_magic; /* magic number */ |
| uint th_type; /* transaction type */ |
| int32_t th_tid; /* transaction id (unused) */ |
| uint th_num_items; /* num items logged by trans */ |
| } xfs_trans_header_t; |
| |
| #define XFS_TRANS_HEADER_MAGIC 0x5452414e /* TRAN */ |
| |
| /* |
| * The only type valid for th_type in CIL-enabled file system logs: |
| */ |
| #define XFS_TRANS_CHECKPOINT 40 |
| |
| /* |
| * Log item types. |
| */ |
| #define XFS_LI_EFI 0x1236 |
| #define XFS_LI_EFD 0x1237 |
| #define XFS_LI_IUNLINK 0x1238 |
| #define XFS_LI_INODE 0x123b /* aligned ino chunks, var-size ibufs */ |
| #define XFS_LI_BUF 0x123c /* v2 bufs, variable sized inode bufs */ |
| #define XFS_LI_DQUOT 0x123d |
| #define XFS_LI_QUOTAOFF 0x123e |
| #define XFS_LI_ICREATE 0x123f |
| #define XFS_LI_RUI 0x1240 /* rmap update intent */ |
| #define XFS_LI_RUD 0x1241 |
| #define XFS_LI_CUI 0x1242 /* refcount update intent */ |
| #define XFS_LI_CUD 0x1243 |
| #define XFS_LI_BUI 0x1244 /* bmbt update intent */ |
| #define XFS_LI_BUD 0x1245 |
| |
| #define XFS_LI_TYPE_DESC \ |
| { XFS_LI_EFI, "XFS_LI_EFI" }, \ |
| { XFS_LI_EFD, "XFS_LI_EFD" }, \ |
| { XFS_LI_IUNLINK, "XFS_LI_IUNLINK" }, \ |
| { XFS_LI_INODE, "XFS_LI_INODE" }, \ |
| { XFS_LI_BUF, "XFS_LI_BUF" }, \ |
| { XFS_LI_DQUOT, "XFS_LI_DQUOT" }, \ |
| { XFS_LI_QUOTAOFF, "XFS_LI_QUOTAOFF" }, \ |
| { XFS_LI_ICREATE, "XFS_LI_ICREATE" }, \ |
| { XFS_LI_RUI, "XFS_LI_RUI" }, \ |
| { XFS_LI_RUD, "XFS_LI_RUD" }, \ |
| { XFS_LI_CUI, "XFS_LI_CUI" }, \ |
| { XFS_LI_CUD, "XFS_LI_CUD" }, \ |
| { XFS_LI_BUI, "XFS_LI_BUI" }, \ |
| { XFS_LI_BUD, "XFS_LI_BUD" } |
| |
| /* |
| * Inode Log Item Format definitions. |
| * |
| * This is the structure used to lay out an inode log item in the |
| * log. The size of the inline data/extents/b-tree root to be logged |
| * (if any) is indicated in the ilf_dsize field. Changes to this structure |
| * must be added on to the end. |
| */ |
| struct xfs_inode_log_format { |
| uint16_t ilf_type; /* inode log item type */ |
| uint16_t ilf_size; /* size of this item */ |
| uint32_t ilf_fields; /* flags for fields logged */ |
| uint16_t ilf_asize; /* size of attr d/ext/root */ |
| uint16_t ilf_dsize; /* size of data/ext/root */ |
| uint32_t ilf_pad; /* pad for 64 bit boundary */ |
| uint64_t ilf_ino; /* inode number */ |
| union { |
| uint32_t ilfu_rdev; /* rdev value for dev inode*/ |
| uint8_t __pad[16]; /* unused */ |
| } ilf_u; |
| int64_t ilf_blkno; /* blkno of inode buffer */ |
| int32_t ilf_len; /* len of inode buffer */ |
| int32_t ilf_boffset; /* off of inode in buffer */ |
| }; |
| |
| /* |
| * Old 32 bit systems will log in this format without the 64 bit |
| * alignment padding. Recovery will detect this and convert it to the |
| * correct format. |
| */ |
| struct xfs_inode_log_format_32 { |
| uint16_t ilf_type; /* inode log item type */ |
| uint16_t ilf_size; /* size of this item */ |
| uint32_t ilf_fields; /* flags for fields logged */ |
| uint16_t ilf_asize; /* size of attr d/ext/root */ |
| uint16_t ilf_dsize; /* size of data/ext/root */ |
| uint64_t ilf_ino; /* inode number */ |
| union { |
| uint32_t ilfu_rdev; /* rdev value for dev inode*/ |
| uint8_t __pad[16]; /* unused */ |
| } ilf_u; |
| int64_t ilf_blkno; /* blkno of inode buffer */ |
| int32_t ilf_len; /* len of inode buffer */ |
| int32_t ilf_boffset; /* off of inode in buffer */ |
| } __attribute__((packed)); |
| |
| |
| /* |
| * Flags for xfs_trans_log_inode flags field. |
| */ |
| #define XFS_ILOG_CORE 0x001 /* log standard inode fields */ |
| #define XFS_ILOG_DDATA 0x002 /* log i_df.if_data */ |
| #define XFS_ILOG_DEXT 0x004 /* log i_df.if_extents */ |
| #define XFS_ILOG_DBROOT 0x008 /* log i_df.i_broot */ |
| #define XFS_ILOG_DEV 0x010 /* log the dev field */ |
| #define XFS_ILOG_UUID 0x020 /* added long ago, but never used */ |
| #define XFS_ILOG_ADATA 0x040 /* log i_af.if_data */ |
| #define XFS_ILOG_AEXT 0x080 /* log i_af.if_extents */ |
| #define XFS_ILOG_ABROOT 0x100 /* log i_af.i_broot */ |
| #define XFS_ILOG_DOWNER 0x200 /* change the data fork owner on replay */ |
| #define XFS_ILOG_AOWNER 0x400 /* change the attr fork owner on replay */ |
| |
| |
| /* |
| * The timestamps are dirty, but not necessarily anything else in the inode |
| * core. Unlike the other fields above this one must never make it to disk |
| * in the ilf_fields of the inode_log_format, but is purely store in-memory in |
| * ili_fields in the inode_log_item. |
| */ |
| #define XFS_ILOG_TIMESTAMP 0x4000 |
| |
| #define XFS_ILOG_NONCORE (XFS_ILOG_DDATA | XFS_ILOG_DEXT | \ |
| XFS_ILOG_DBROOT | XFS_ILOG_DEV | \ |
| XFS_ILOG_ADATA | XFS_ILOG_AEXT | \ |
| XFS_ILOG_ABROOT | XFS_ILOG_DOWNER | \ |
| XFS_ILOG_AOWNER) |
| |
| #define XFS_ILOG_DFORK (XFS_ILOG_DDATA | XFS_ILOG_DEXT | \ |
| XFS_ILOG_DBROOT) |
| |
| #define XFS_ILOG_AFORK (XFS_ILOG_ADATA | XFS_ILOG_AEXT | \ |
| XFS_ILOG_ABROOT) |
| |
| #define XFS_ILOG_ALL (XFS_ILOG_CORE | XFS_ILOG_DDATA | \ |
| XFS_ILOG_DEXT | XFS_ILOG_DBROOT | \ |
| XFS_ILOG_DEV | XFS_ILOG_ADATA | \ |
| XFS_ILOG_AEXT | XFS_ILOG_ABROOT | \ |
| XFS_ILOG_TIMESTAMP | XFS_ILOG_DOWNER | \ |
| XFS_ILOG_AOWNER) |
| |
| static inline int xfs_ilog_fbroot(int w) |
| { |
| return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT); |
| } |
| |
| static inline int xfs_ilog_fext(int w) |
| { |
| return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT); |
| } |
| |
| static inline int xfs_ilog_fdata(int w) |
| { |
| return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA); |
| } |
| |
| /* |
| * Incore version of the on-disk inode core structures. We log this directly |
| * into the journal in host CPU format (for better or worse) and as such |
| * directly mirrors the xfs_dinode structure as it must contain all the same |
| * information. |
| */ |
| typedef struct xfs_ictimestamp { |
| int32_t t_sec; /* timestamp seconds */ |
| int32_t t_nsec; /* timestamp nanoseconds */ |
| } xfs_ictimestamp_t; |
| |
| /* |
| * Define the format of the inode core that is logged. This structure must be |
| * kept identical to struct xfs_dinode except for the endianness annotations. |
| */ |
| struct xfs_log_dinode { |
| uint16_t di_magic; /* inode magic # = XFS_DINODE_MAGIC */ |
| uint16_t di_mode; /* mode and type of file */ |
| int8_t di_version; /* inode version */ |
| int8_t di_format; /* format of di_c data */ |
| uint8_t di_pad3[2]; /* unused in v2/3 inodes */ |
| uint32_t di_uid; /* owner's user id */ |
| uint32_t di_gid; /* owner's group id */ |
| uint32_t di_nlink; /* number of links to file */ |
| uint16_t di_projid_lo; /* lower part of owner's project id */ |
| uint16_t di_projid_hi; /* higher part of owner's project id */ |
| uint8_t di_pad[6]; /* unused, zeroed space */ |
| uint16_t di_flushiter; /* incremented on flush */ |
| xfs_ictimestamp_t di_atime; /* time last accessed */ |
| xfs_ictimestamp_t di_mtime; /* time last modified */ |
| xfs_ictimestamp_t di_ctime; /* time created/inode modified */ |
| xfs_fsize_t di_size; /* number of bytes in file */ |
| xfs_rfsblock_t di_nblocks; /* # of direct & btree blocks used */ |
| xfs_extlen_t di_extsize; /* basic/minimum extent size for file */ |
| xfs_extnum_t di_nextents; /* number of extents in data fork */ |
| xfs_aextnum_t di_anextents; /* number of extents in attribute fork*/ |
| uint8_t di_forkoff; /* attr fork offs, <<3 for 64b align */ |
| int8_t di_aformat; /* format of attr fork's data */ |
| uint32_t di_dmevmask; /* DMIG event mask */ |
| uint16_t di_dmstate; /* DMIG state info */ |
| uint16_t di_flags; /* random flags, XFS_DIFLAG_... */ |
| uint32_t di_gen; /* generation number */ |
| |
| /* di_next_unlinked is the only non-core field in the old dinode */ |
| xfs_agino_t di_next_unlinked;/* agi unlinked list ptr */ |
| |
| /* start of the extended dinode, writable fields */ |
| uint32_t di_crc; /* CRC of the inode */ |
| uint64_t di_changecount; /* number of attribute changes */ |
| xfs_lsn_t di_lsn; /* flush sequence */ |
| uint64_t di_flags2; /* more random flags */ |
| uint32_t di_cowextsize; /* basic cow extent size for file */ |
| uint8_t di_pad2[12]; /* more padding for future expansion */ |
| |
| /* fields only written to during inode creation */ |
| xfs_ictimestamp_t di_crtime; /* time created */ |
| xfs_ino_t di_ino; /* inode number */ |
| uuid_t di_uuid; /* UUID of the filesystem */ |
| |
| /* structure must be padded to 64 bit alignment */ |
| }; |
| |
| static inline uint xfs_log_dinode_size(int version) |
| { |
| if (version == 3) |
| return sizeof(struct xfs_log_dinode); |
| return offsetof(struct xfs_log_dinode, di_next_unlinked); |
| } |
| |
| /* |
| * Buffer Log Format defintions |
| * |
| * These are the physical dirty bitmap defintions for the log format structure. |
| */ |
| #define XFS_BLF_CHUNK 128 |
| #define XFS_BLF_SHIFT 7 |
| #define BIT_TO_WORD_SHIFT 5 |
| #define NBWORD (NBBY * sizeof(unsigned int)) |
| |
| /* |
| * This flag indicates that the buffer contains on disk inodes |
| * and requires special recovery handling. |
| */ |
| #define XFS_BLF_INODE_BUF (1<<0) |
| |
| /* |
| * This flag indicates that the buffer should not be replayed |
| * during recovery because its blocks are being freed. |
| */ |
| #define XFS_BLF_CANCEL (1<<1) |
| |
| /* |
| * This flag indicates that the buffer contains on disk |
| * user or group dquots and may require special recovery handling. |
| */ |
| #define XFS_BLF_UDQUOT_BUF (1<<2) |
| #define XFS_BLF_PDQUOT_BUF (1<<3) |
| #define XFS_BLF_GDQUOT_BUF (1<<4) |
| |
| /* |
| * This is the structure used to lay out a buf log item in the |
| * log. The data map describes which 128 byte chunks of the buffer |
| * have been logged. |
| */ |
| #define XFS_BLF_DATAMAP_SIZE ((XFS_MAX_BLOCKSIZE / XFS_BLF_CHUNK) / NBWORD) |
| |
| typedef struct xfs_buf_log_format { |
| unsigned short blf_type; /* buf log item type indicator */ |
| unsigned short blf_size; /* size of this item */ |
| unsigned short blf_flags; /* misc state */ |
| unsigned short blf_len; /* number of blocks in this buf */ |
| int64_t blf_blkno; /* starting blkno of this buf */ |
| unsigned int blf_map_size; /* used size of data bitmap in words */ |
| unsigned int blf_data_map[XFS_BLF_DATAMAP_SIZE]; /* dirty bitmap */ |
| } xfs_buf_log_format_t; |
| |
| /* |
| * All buffers now need to tell recovery where the magic number |
| * is so that it can verify and calculate the CRCs on the buffer correctly |
| * once the changes have been replayed into the buffer. |
| * |
| * The type value is held in the upper 5 bits of the blf_flags field, which is |
| * an unsigned 16 bit field. Hence we need to shift it 11 bits up and down. |
| */ |
| #define XFS_BLFT_BITS 5 |
| #define XFS_BLFT_SHIFT 11 |
| #define XFS_BLFT_MASK (((1 << XFS_BLFT_BITS) - 1) << XFS_BLFT_SHIFT) |
| |
| enum xfs_blft { |
| XFS_BLFT_UNKNOWN_BUF = 0, |
| XFS_BLFT_UDQUOT_BUF, |
| XFS_BLFT_PDQUOT_BUF, |
| XFS_BLFT_GDQUOT_BUF, |
| XFS_BLFT_BTREE_BUF, |
| XFS_BLFT_AGF_BUF, |
| XFS_BLFT_AGFL_BUF, |
| XFS_BLFT_AGI_BUF, |
| XFS_BLFT_DINO_BUF, |
| XFS_BLFT_SYMLINK_BUF, |
| XFS_BLFT_DIR_BLOCK_BUF, |
| XFS_BLFT_DIR_DATA_BUF, |
| XFS_BLFT_DIR_FREE_BUF, |
| XFS_BLFT_DIR_LEAF1_BUF, |
| XFS_BLFT_DIR_LEAFN_BUF, |
| XFS_BLFT_DA_NODE_BUF, |
| XFS_BLFT_ATTR_LEAF_BUF, |
| XFS_BLFT_ATTR_RMT_BUF, |
| XFS_BLFT_SB_BUF, |
| XFS_BLFT_RTBITMAP_BUF, |
| XFS_BLFT_RTSUMMARY_BUF, |
| XFS_BLFT_MAX_BUF = (1 << XFS_BLFT_BITS), |
| }; |
| |
| static inline void |
| xfs_blft_to_flags(struct xfs_buf_log_format *blf, enum xfs_blft type) |
| { |
| ASSERT(type > XFS_BLFT_UNKNOWN_BUF && type < XFS_BLFT_MAX_BUF); |
| blf->blf_flags &= ~XFS_BLFT_MASK; |
| blf->blf_flags |= ((type << XFS_BLFT_SHIFT) & XFS_BLFT_MASK); |
| } |
| |
| static inline uint16_t |
| xfs_blft_from_flags(struct xfs_buf_log_format *blf) |
| { |
| return (blf->blf_flags & XFS_BLFT_MASK) >> XFS_BLFT_SHIFT; |
| } |
| |
| /* |
| * EFI/EFD log format definitions |
| */ |
| typedef struct xfs_extent { |
| xfs_fsblock_t ext_start; |
| xfs_extlen_t ext_len; |
| } xfs_extent_t; |
| |
| /* |
| * Since an xfs_extent_t has types (start:64, len: 32) |
| * there are different alignments on 32 bit and 64 bit kernels. |
| * So we provide the different variants for use by a |
| * conversion routine. |
| */ |
| typedef struct xfs_extent_32 { |
| uint64_t ext_start; |
| uint32_t ext_len; |
| } __attribute__((packed)) xfs_extent_32_t; |
| |
| typedef struct xfs_extent_64 { |
| uint64_t ext_start; |
| uint32_t ext_len; |
| uint32_t ext_pad; |
| } xfs_extent_64_t; |
| |
| /* |
| * This is the structure used to lay out an efi log item in the |
| * log. The efi_extents field is a variable size array whose |
| * size is given by efi_nextents. |
| */ |
| typedef struct xfs_efi_log_format { |
| uint16_t efi_type; /* efi log item type */ |
| uint16_t efi_size; /* size of this item */ |
| uint32_t efi_nextents; /* # extents to free */ |
| uint64_t efi_id; /* efi identifier */ |
| xfs_extent_t efi_extents[1]; /* array of extents to free */ |
| } xfs_efi_log_format_t; |
| |
| typedef struct xfs_efi_log_format_32 { |
| uint16_t efi_type; /* efi log item type */ |
| uint16_t efi_size; /* size of this item */ |
| uint32_t efi_nextents; /* # extents to free */ |
| uint64_t efi_id; /* efi identifier */ |
| xfs_extent_32_t efi_extents[1]; /* array of extents to free */ |
| } __attribute__((packed)) xfs_efi_log_format_32_t; |
| |
| typedef struct xfs_efi_log_format_64 { |
| uint16_t efi_type; /* efi log item type */ |
| uint16_t efi_size; /* size of this item */ |
| uint32_t efi_nextents; /* # extents to free */ |
| uint64_t efi_id; /* efi identifier */ |
| xfs_extent_64_t efi_extents[1]; /* array of extents to free */ |
| } xfs_efi_log_format_64_t; |
| |
| /* |
| * This is the structure used to lay out an efd log item in the |
| * log. The efd_extents array is a variable size array whose |
| * size is given by efd_nextents; |
| */ |
| typedef struct xfs_efd_log_format { |
| uint16_t efd_type; /* efd log item type */ |
| uint16_t efd_size; /* size of this item */ |
| uint32_t efd_nextents; /* # of extents freed */ |
| uint64_t efd_efi_id; /* id of corresponding efi */ |
| xfs_extent_t efd_extents[1]; /* array of extents freed */ |
| } xfs_efd_log_format_t; |
| |
| typedef struct xfs_efd_log_format_32 { |
| uint16_t efd_type; /* efd log item type */ |
| uint16_t efd_size; /* size of this item */ |
| uint32_t efd_nextents; /* # of extents freed */ |
| uint64_t efd_efi_id; /* id of corresponding efi */ |
| xfs_extent_32_t efd_extents[1]; /* array of extents freed */ |
| } __attribute__((packed)) xfs_efd_log_format_32_t; |
| |
| typedef struct xfs_efd_log_format_64 { |
| uint16_t efd_type; /* efd log item type */ |
| uint16_t efd_size; /* size of this item */ |
| uint32_t efd_nextents; /* # of extents freed */ |
| uint64_t efd_efi_id; /* id of corresponding efi */ |
| xfs_extent_64_t efd_extents[1]; /* array of extents freed */ |
| } xfs_efd_log_format_64_t; |
| |
| /* |
| * RUI/RUD (reverse mapping) log format definitions |
| */ |
| struct xfs_map_extent { |
| uint64_t me_owner; |
| uint64_t me_startblock; |
| uint64_t me_startoff; |
| uint32_t me_len; |
| uint32_t me_flags; |
| }; |
| |
| /* rmap me_flags: upper bits are flags, lower byte is type code */ |
| #define XFS_RMAP_EXTENT_MAP 1 |
| #define XFS_RMAP_EXTENT_MAP_SHARED 2 |
| #define XFS_RMAP_EXTENT_UNMAP 3 |
| #define XFS_RMAP_EXTENT_UNMAP_SHARED 4 |
| #define XFS_RMAP_EXTENT_CONVERT 5 |
| #define XFS_RMAP_EXTENT_CONVERT_SHARED 6 |
| #define XFS_RMAP_EXTENT_ALLOC 7 |
| #define XFS_RMAP_EXTENT_FREE 8 |
| #define XFS_RMAP_EXTENT_TYPE_MASK 0xFF |
| |
| #define XFS_RMAP_EXTENT_ATTR_FORK (1U << 31) |
| #define XFS_RMAP_EXTENT_BMBT_BLOCK (1U << 30) |
| #define XFS_RMAP_EXTENT_UNWRITTEN (1U << 29) |
| |
| #define XFS_RMAP_EXTENT_FLAGS (XFS_RMAP_EXTENT_TYPE_MASK | \ |
| XFS_RMAP_EXTENT_ATTR_FORK | \ |
| XFS_RMAP_EXTENT_BMBT_BLOCK | \ |
| XFS_RMAP_EXTENT_UNWRITTEN) |
| |
| /* |
| * This is the structure used to lay out an rui log item in the |
| * log. The rui_extents field is a variable size array whose |
| * size is given by rui_nextents. |
| */ |
| struct xfs_rui_log_format { |
| uint16_t rui_type; /* rui log item type */ |
| uint16_t rui_size; /* size of this item */ |
| uint32_t rui_nextents; /* # extents to free */ |
| uint64_t rui_id; /* rui identifier */ |
| struct xfs_map_extent rui_extents[]; /* array of extents to rmap */ |
| }; |
| |
| static inline size_t |
| xfs_rui_log_format_sizeof( |
| unsigned int nr) |
| { |
| return sizeof(struct xfs_rui_log_format) + |
| nr * sizeof(struct xfs_map_extent); |
| } |
| |
| /* |
| * This is the structure used to lay out an rud log item in the |
| * log. The rud_extents array is a variable size array whose |
| * size is given by rud_nextents; |
| */ |
| struct xfs_rud_log_format { |
| uint16_t rud_type; /* rud log item type */ |
| uint16_t rud_size; /* size of this item */ |
| uint32_t __pad; |
| uint64_t rud_rui_id; /* id of corresponding rui */ |
| }; |
| |
| /* |
| * CUI/CUD (refcount update) log format definitions |
| */ |
| struct xfs_phys_extent { |
| uint64_t pe_startblock; |
| uint32_t pe_len; |
| uint32_t pe_flags; |
| }; |
| |
| /* refcount pe_flags: upper bits are flags, lower byte is type code */ |
| /* Type codes are taken directly from enum xfs_refcount_intent_type. */ |
| #define XFS_REFCOUNT_EXTENT_TYPE_MASK 0xFF |
| |
| #define XFS_REFCOUNT_EXTENT_FLAGS (XFS_REFCOUNT_EXTENT_TYPE_MASK) |
| |
| /* |
| * This is the structure used to lay out a cui log item in the |
| * log. The cui_extents field is a variable size array whose |
| * size is given by cui_nextents. |
| */ |
| struct xfs_cui_log_format { |
| uint16_t cui_type; /* cui log item type */ |
| uint16_t cui_size; /* size of this item */ |
| uint32_t cui_nextents; /* # extents to free */ |
| uint64_t cui_id; /* cui identifier */ |
| struct xfs_phys_extent cui_extents[]; /* array of extents */ |
| }; |
| |
| static inline size_t |
| xfs_cui_log_format_sizeof( |
| unsigned int nr) |
| { |
| return sizeof(struct xfs_cui_log_format) + |
| nr * sizeof(struct xfs_phys_extent); |
| } |
| |
| /* |
| * This is the structure used to lay out a cud log item in the |
| * log. The cud_extents array is a variable size array whose |
| * size is given by cud_nextents; |
| */ |
| struct xfs_cud_log_format { |
| uint16_t cud_type; /* cud log item type */ |
| uint16_t cud_size; /* size of this item */ |
| uint32_t __pad; |
| uint64_t cud_cui_id; /* id of corresponding cui */ |
| }; |
| |
| /* |
| * BUI/BUD (inode block mapping) log format definitions |
| */ |
| |
| /* bmbt me_flags: upper bits are flags, lower byte is type code */ |
| /* Type codes are taken directly from enum xfs_bmap_intent_type. */ |
| #define XFS_BMAP_EXTENT_TYPE_MASK 0xFF |
| |
| #define XFS_BMAP_EXTENT_ATTR_FORK (1U << 31) |
| #define XFS_BMAP_EXTENT_UNWRITTEN (1U << 30) |
| |
| #define XFS_BMAP_EXTENT_FLAGS (XFS_BMAP_EXTENT_TYPE_MASK | \ |
| XFS_BMAP_EXTENT_ATTR_FORK | \ |
| XFS_BMAP_EXTENT_UNWRITTEN) |
| |
| /* |
| * This is the structure used to lay out an bui log item in the |
| * log. The bui_extents field is a variable size array whose |
| * size is given by bui_nextents. |
| */ |
| struct xfs_bui_log_format { |
| uint16_t bui_type; /* bui log item type */ |
| uint16_t bui_size; /* size of this item */ |
| uint32_t bui_nextents; /* # extents to free */ |
| uint64_t bui_id; /* bui identifier */ |
| struct xfs_map_extent bui_extents[]; /* array of extents to bmap */ |
| }; |
| |
| static inline size_t |
| xfs_bui_log_format_sizeof( |
| unsigned int nr) |
| { |
| return sizeof(struct xfs_bui_log_format) + |
| nr * sizeof(struct xfs_map_extent); |
| } |
| |
| /* |
| * This is the structure used to lay out an bud log item in the |
| * log. The bud_extents array is a variable size array whose |
| * size is given by bud_nextents; |
| */ |
| struct xfs_bud_log_format { |
| uint16_t bud_type; /* bud log item type */ |
| uint16_t bud_size; /* size of this item */ |
| uint32_t __pad; |
| uint64_t bud_bui_id; /* id of corresponding bui */ |
| }; |
| |
| /* |
| * Dquot Log format definitions. |
| * |
| * The first two fields must be the type and size fitting into |
| * 32 bits : log_recovery code assumes that. |
| */ |
| typedef struct xfs_dq_logformat { |
| uint16_t qlf_type; /* dquot log item type */ |
| uint16_t qlf_size; /* size of this item */ |
| xfs_dqid_t qlf_id; /* usr/grp/proj id : 32 bits */ |
| int64_t qlf_blkno; /* blkno of dquot buffer */ |
| int32_t qlf_len; /* len of dquot buffer */ |
| uint32_t qlf_boffset; /* off of dquot in buffer */ |
| } xfs_dq_logformat_t; |
| |
| /* |
| * log format struct for QUOTAOFF records. |
| * The first two fields must be the type and size fitting into |
| * 32 bits : log_recovery code assumes that. |
| * We write two LI_QUOTAOFF logitems per quotaoff, the last one keeps a pointer |
| * to the first and ensures that the first logitem is taken out of the AIL |
| * only when the last one is securely committed. |
| */ |
| typedef struct xfs_qoff_logformat { |
| unsigned short qf_type; /* quotaoff log item type */ |
| unsigned short qf_size; /* size of this item */ |
| unsigned int qf_flags; /* USR and/or GRP */ |
| char qf_pad[12]; /* padding for future */ |
| } xfs_qoff_logformat_t; |
| |
| /* |
| * Disk quotas status in m_qflags, and also sb_qflags. 16 bits. |
| */ |
| #define XFS_UQUOTA_ACCT 0x0001 /* user quota accounting ON */ |
| #define XFS_UQUOTA_ENFD 0x0002 /* user quota limits enforced */ |
| #define XFS_UQUOTA_CHKD 0x0004 /* quotacheck run on usr quotas */ |
| #define XFS_PQUOTA_ACCT 0x0008 /* project quota accounting ON */ |
| #define XFS_OQUOTA_ENFD 0x0010 /* other (grp/prj) quota limits enforced */ |
| #define XFS_OQUOTA_CHKD 0x0020 /* quotacheck run on other (grp/prj) quotas */ |
| #define XFS_GQUOTA_ACCT 0x0040 /* group quota accounting ON */ |
| |
| /* |
| * Conversion to and from the combined OQUOTA flag (if necessary) |
| * is done only in xfs_sb_qflags_to_disk() and xfs_sb_qflags_from_disk() |
| */ |
| #define XFS_GQUOTA_ENFD 0x0080 /* group quota limits enforced */ |
| #define XFS_GQUOTA_CHKD 0x0100 /* quotacheck run on group quotas */ |
| #define XFS_PQUOTA_ENFD 0x0200 /* project quota limits enforced */ |
| #define XFS_PQUOTA_CHKD 0x0400 /* quotacheck run on project quotas */ |
| |
| #define XFS_ALL_QUOTA_ACCT \ |
| (XFS_UQUOTA_ACCT | XFS_GQUOTA_ACCT | XFS_PQUOTA_ACCT) |
| #define XFS_ALL_QUOTA_ENFD \ |
| (XFS_UQUOTA_ENFD | XFS_GQUOTA_ENFD | XFS_PQUOTA_ENFD) |
| #define XFS_ALL_QUOTA_CHKD \ |
| (XFS_UQUOTA_CHKD | XFS_GQUOTA_CHKD | XFS_PQUOTA_CHKD) |
| |
| #define XFS_MOUNT_QUOTA_ALL (XFS_UQUOTA_ACCT|XFS_UQUOTA_ENFD|\ |
| XFS_UQUOTA_CHKD|XFS_GQUOTA_ACCT|\ |
| XFS_GQUOTA_ENFD|XFS_GQUOTA_CHKD|\ |
| XFS_PQUOTA_ACCT|XFS_PQUOTA_ENFD|\ |
| XFS_PQUOTA_CHKD) |
| |
| /* |
| * Inode create log item structure |
| * |
| * Log recovery assumes the first two entries are the type and size and they fit |
| * in 32 bits. Also in host order (ugh) so they have to be 32 bit aligned so |
| * decoding can be done correctly. |
| */ |
| struct xfs_icreate_log { |
| uint16_t icl_type; /* type of log format structure */ |
| uint16_t icl_size; /* size of log format structure */ |
| __be32 icl_ag; /* ag being allocated in */ |
| __be32 icl_agbno; /* start block of inode range */ |
| __be32 icl_count; /* number of inodes to initialise */ |
| __be32 icl_isize; /* size of inodes */ |
| __be32 icl_length; /* length of extent to initialise */ |
| __be32 icl_gen; /* inode generation number to use */ |
| }; |
| |
| #endif /* __XFS_LOG_FORMAT_H__ */ |