| /* | |
| * TI LP855x Backlight Driver | |
| * | |
| * Copyright (C) 2011 Texas Instruments | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/slab.h> | |
| #include <linux/i2c.h> | |
| #include <linux/backlight.h> | |
| #include <linux/delay.h> | |
| #include <linux/err.h> | |
| #include <linux/of.h> | |
| #include <linux/platform_data/lp855x.h> | |
| #include <linux/pwm.h> | |
| #include <linux/regulator/consumer.h> | |
| /* LP8550/1/2/3/6 Registers */ | |
| #define LP855X_BRIGHTNESS_CTRL 0x00 | |
| #define LP855X_DEVICE_CTRL 0x01 | |
| #define LP855X_EEPROM_START 0xA0 | |
| #define LP855X_EEPROM_END 0xA7 | |
| #define LP8556_EPROM_START 0xA0 | |
| #define LP8556_EPROM_END 0xAF | |
| /* LP8555/7 Registers */ | |
| #define LP8557_BL_CMD 0x00 | |
| #define LP8557_BL_MASK 0x01 | |
| #define LP8557_BL_ON 0x01 | |
| #define LP8557_BL_OFF 0x00 | |
| #define LP8557_BRIGHTNESS_CTRL 0x04 | |
| #define LP8557_CONFIG 0x10 | |
| #define LP8555_EPROM_START 0x10 | |
| #define LP8555_EPROM_END 0x7A | |
| #define LP8557_EPROM_START 0x10 | |
| #define LP8557_EPROM_END 0x1E | |
| #define DEFAULT_BL_NAME "lcd-backlight" | |
| #define MAX_BRIGHTNESS 255 | |
| enum lp855x_brightness_ctrl_mode { | |
| PWM_BASED = 1, | |
| REGISTER_BASED, | |
| }; | |
| struct lp855x; | |
| /* | |
| * struct lp855x_device_config | |
| * @pre_init_device: init device function call before updating the brightness | |
| * @reg_brightness: register address for brigthenss control | |
| * @reg_devicectrl: register address for device control | |
| * @post_init_device: late init device function call | |
| */ | |
| struct lp855x_device_config { | |
| int (*pre_init_device)(struct lp855x *); | |
| u8 reg_brightness; | |
| u8 reg_devicectrl; | |
| int (*post_init_device)(struct lp855x *); | |
| }; | |
| struct lp855x { | |
| const char *chipname; | |
| enum lp855x_chip_id chip_id; | |
| enum lp855x_brightness_ctrl_mode mode; | |
| struct lp855x_device_config *cfg; | |
| struct i2c_client *client; | |
| struct backlight_device *bl; | |
| struct device *dev; | |
| struct lp855x_platform_data *pdata; | |
| struct pwm_device *pwm; | |
| struct regulator *supply; /* regulator for VDD input */ | |
| struct regulator *enable; /* regulator for EN/VDDIO input */ | |
| }; | |
| static int lp855x_write_byte(struct lp855x *lp, u8 reg, u8 data) | |
| { | |
| return i2c_smbus_write_byte_data(lp->client, reg, data); | |
| } | |
| static int lp855x_update_bit(struct lp855x *lp, u8 reg, u8 mask, u8 data) | |
| { | |
| int ret; | |
| u8 tmp; | |
| ret = i2c_smbus_read_byte_data(lp->client, reg); | |
| if (ret < 0) { | |
| dev_err(lp->dev, "failed to read 0x%.2x\n", reg); | |
| return ret; | |
| } | |
| tmp = (u8)ret; | |
| tmp &= ~mask; | |
| tmp |= data & mask; | |
| return lp855x_write_byte(lp, reg, tmp); | |
| } | |
| static bool lp855x_is_valid_rom_area(struct lp855x *lp, u8 addr) | |
| { | |
| u8 start, end; | |
| switch (lp->chip_id) { | |
| case LP8550: | |
| case LP8551: | |
| case LP8552: | |
| case LP8553: | |
| start = LP855X_EEPROM_START; | |
| end = LP855X_EEPROM_END; | |
| break; | |
| case LP8556: | |
| start = LP8556_EPROM_START; | |
| end = LP8556_EPROM_END; | |
| break; | |
| case LP8555: | |
| start = LP8555_EPROM_START; | |
| end = LP8555_EPROM_END; | |
| break; | |
| case LP8557: | |
| start = LP8557_EPROM_START; | |
| end = LP8557_EPROM_END; | |
| break; | |
| default: | |
| return false; | |
| } | |
| return addr >= start && addr <= end; | |
| } | |
| static int lp8557_bl_off(struct lp855x *lp) | |
| { | |
| /* BL_ON = 0 before updating EPROM settings */ | |
| return lp855x_update_bit(lp, LP8557_BL_CMD, LP8557_BL_MASK, | |
| LP8557_BL_OFF); | |
| } | |
| static int lp8557_bl_on(struct lp855x *lp) | |
| { | |
| /* BL_ON = 1 after updating EPROM settings */ | |
| return lp855x_update_bit(lp, LP8557_BL_CMD, LP8557_BL_MASK, | |
| LP8557_BL_ON); | |
| } | |
| static struct lp855x_device_config lp855x_dev_cfg = { | |
| .reg_brightness = LP855X_BRIGHTNESS_CTRL, | |
| .reg_devicectrl = LP855X_DEVICE_CTRL, | |
| }; | |
| static struct lp855x_device_config lp8557_dev_cfg = { | |
| .reg_brightness = LP8557_BRIGHTNESS_CTRL, | |
| .reg_devicectrl = LP8557_CONFIG, | |
| .pre_init_device = lp8557_bl_off, | |
| .post_init_device = lp8557_bl_on, | |
| }; | |
| /* | |
| * Device specific configuration flow | |
| * | |
| * a) pre_init_device(optional) | |
| * b) update the brightness register | |
| * c) update device control register | |
| * d) update ROM area(optional) | |
| * e) post_init_device(optional) | |
| * | |
| */ | |
| static int lp855x_configure(struct lp855x *lp) | |
| { | |
| u8 val, addr; | |
| int i, ret; | |
| struct lp855x_platform_data *pd = lp->pdata; | |
| switch (lp->chip_id) { | |
| case LP8550: | |
| case LP8551: | |
| case LP8552: | |
| case LP8553: | |
| case LP8556: | |
| lp->cfg = &lp855x_dev_cfg; | |
| break; | |
| case LP8555: | |
| case LP8557: | |
| lp->cfg = &lp8557_dev_cfg; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| if (lp->cfg->pre_init_device) { | |
| ret = lp->cfg->pre_init_device(lp); | |
| if (ret) { | |
| dev_err(lp->dev, "pre init device err: %d\n", ret); | |
| goto err; | |
| } | |
| } | |
| val = pd->initial_brightness; | |
| ret = lp855x_write_byte(lp, lp->cfg->reg_brightness, val); | |
| if (ret) | |
| goto err; | |
| val = pd->device_control; | |
| ret = lp855x_write_byte(lp, lp->cfg->reg_devicectrl, val); | |
| if (ret) | |
| goto err; | |
| if (pd->size_program > 0) { | |
| for (i = 0; i < pd->size_program; i++) { | |
| addr = pd->rom_data[i].addr; | |
| val = pd->rom_data[i].val; | |
| if (!lp855x_is_valid_rom_area(lp, addr)) | |
| continue; | |
| ret = lp855x_write_byte(lp, addr, val); | |
| if (ret) | |
| goto err; | |
| } | |
| } | |
| if (lp->cfg->post_init_device) { | |
| ret = lp->cfg->post_init_device(lp); | |
| if (ret) { | |
| dev_err(lp->dev, "post init device err: %d\n", ret); | |
| goto err; | |
| } | |
| } | |
| return 0; | |
| err: | |
| return ret; | |
| } | |
| static void lp855x_pwm_ctrl(struct lp855x *lp, int br, int max_br) | |
| { | |
| unsigned int period = lp->pdata->period_ns; | |
| unsigned int duty = br * period / max_br; | |
| struct pwm_device *pwm; | |
| /* request pwm device with the consumer name */ | |
| if (!lp->pwm) { | |
| pwm = devm_pwm_get(lp->dev, lp->chipname); | |
| if (IS_ERR(pwm)) | |
| return; | |
| lp->pwm = pwm; | |
| /* | |
| * FIXME: pwm_apply_args() should be removed when switching to | |
| * the atomic PWM API. | |
| */ | |
| pwm_apply_args(pwm); | |
| } | |
| pwm_config(lp->pwm, duty, period); | |
| if (duty) | |
| pwm_enable(lp->pwm); | |
| else | |
| pwm_disable(lp->pwm); | |
| } | |
| static int lp855x_bl_update_status(struct backlight_device *bl) | |
| { | |
| struct lp855x *lp = bl_get_data(bl); | |
| int brightness = bl->props.brightness; | |
| if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) | |
| brightness = 0; | |
| if (lp->mode == PWM_BASED) | |
| lp855x_pwm_ctrl(lp, brightness, bl->props.max_brightness); | |
| else if (lp->mode == REGISTER_BASED) | |
| lp855x_write_byte(lp, lp->cfg->reg_brightness, (u8)brightness); | |
| return 0; | |
| } | |
| static const struct backlight_ops lp855x_bl_ops = { | |
| .options = BL_CORE_SUSPENDRESUME, | |
| .update_status = lp855x_bl_update_status, | |
| }; | |
| static int lp855x_backlight_register(struct lp855x *lp) | |
| { | |
| struct backlight_device *bl; | |
| struct backlight_properties props; | |
| struct lp855x_platform_data *pdata = lp->pdata; | |
| const char *name = pdata->name ? : DEFAULT_BL_NAME; | |
| memset(&props, 0, sizeof(props)); | |
| props.type = BACKLIGHT_PLATFORM; | |
| props.max_brightness = MAX_BRIGHTNESS; | |
| if (pdata->initial_brightness > props.max_brightness) | |
| pdata->initial_brightness = props.max_brightness; | |
| props.brightness = pdata->initial_brightness; | |
| bl = devm_backlight_device_register(lp->dev, name, lp->dev, lp, | |
| &lp855x_bl_ops, &props); | |
| if (IS_ERR(bl)) | |
| return PTR_ERR(bl); | |
| lp->bl = bl; | |
| return 0; | |
| } | |
| static ssize_t lp855x_get_chip_id(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct lp855x *lp = dev_get_drvdata(dev); | |
| return scnprintf(buf, PAGE_SIZE, "%s\n", lp->chipname); | |
| } | |
| static ssize_t lp855x_get_bl_ctl_mode(struct device *dev, | |
| struct device_attribute *attr, char *buf) | |
| { | |
| struct lp855x *lp = dev_get_drvdata(dev); | |
| char *strmode = NULL; | |
| if (lp->mode == PWM_BASED) | |
| strmode = "pwm based"; | |
| else if (lp->mode == REGISTER_BASED) | |
| strmode = "register based"; | |
| return scnprintf(buf, PAGE_SIZE, "%s\n", strmode); | |
| } | |
| static DEVICE_ATTR(chip_id, S_IRUGO, lp855x_get_chip_id, NULL); | |
| static DEVICE_ATTR(bl_ctl_mode, S_IRUGO, lp855x_get_bl_ctl_mode, NULL); | |
| static struct attribute *lp855x_attributes[] = { | |
| &dev_attr_chip_id.attr, | |
| &dev_attr_bl_ctl_mode.attr, | |
| NULL, | |
| }; | |
| static const struct attribute_group lp855x_attr_group = { | |
| .attrs = lp855x_attributes, | |
| }; | |
| #ifdef CONFIG_OF | |
| static int lp855x_parse_dt(struct lp855x *lp) | |
| { | |
| struct device *dev = lp->dev; | |
| struct device_node *node = dev->of_node; | |
| struct lp855x_platform_data *pdata; | |
| int rom_length; | |
| if (!node) { | |
| dev_err(dev, "no platform data\n"); | |
| return -EINVAL; | |
| } | |
| pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) | |
| return -ENOMEM; | |
| of_property_read_string(node, "bl-name", &pdata->name); | |
| of_property_read_u8(node, "dev-ctrl", &pdata->device_control); | |
| of_property_read_u8(node, "init-brt", &pdata->initial_brightness); | |
| of_property_read_u32(node, "pwm-period", &pdata->period_ns); | |
| /* Fill ROM platform data if defined */ | |
| rom_length = of_get_child_count(node); | |
| if (rom_length > 0) { | |
| struct lp855x_rom_data *rom; | |
| struct device_node *child; | |
| int i = 0; | |
| rom = devm_kcalloc(dev, rom_length, sizeof(*rom), GFP_KERNEL); | |
| if (!rom) | |
| return -ENOMEM; | |
| for_each_child_of_node(node, child) { | |
| of_property_read_u8(child, "rom-addr", &rom[i].addr); | |
| of_property_read_u8(child, "rom-val", &rom[i].val); | |
| i++; | |
| } | |
| pdata->size_program = rom_length; | |
| pdata->rom_data = &rom[0]; | |
| } | |
| lp->pdata = pdata; | |
| return 0; | |
| } | |
| #else | |
| static int lp855x_parse_dt(struct lp855x *lp) | |
| { | |
| return -EINVAL; | |
| } | |
| #endif | |
| static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) | |
| { | |
| struct lp855x *lp; | |
| int ret; | |
| if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) | |
| return -EIO; | |
| lp = devm_kzalloc(&cl->dev, sizeof(struct lp855x), GFP_KERNEL); | |
| if (!lp) | |
| return -ENOMEM; | |
| lp->client = cl; | |
| lp->dev = &cl->dev; | |
| lp->chipname = id->name; | |
| lp->chip_id = id->driver_data; | |
| lp->pdata = dev_get_platdata(&cl->dev); | |
| if (!lp->pdata) { | |
| ret = lp855x_parse_dt(lp); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| if (lp->pdata->period_ns > 0) | |
| lp->mode = PWM_BASED; | |
| else | |
| lp->mode = REGISTER_BASED; | |
| lp->supply = devm_regulator_get(lp->dev, "power"); | |
| if (IS_ERR(lp->supply)) { | |
| if (PTR_ERR(lp->supply) == -EPROBE_DEFER) | |
| return -EPROBE_DEFER; | |
| lp->supply = NULL; | |
| } | |
| lp->enable = devm_regulator_get_optional(lp->dev, "enable"); | |
| if (IS_ERR(lp->enable)) { | |
| ret = PTR_ERR(lp->enable); | |
| if (ret == -ENODEV) { | |
| lp->enable = NULL; | |
| } else { | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(lp->dev, "error getting enable regulator: %d\n", | |
| ret); | |
| return ret; | |
| } | |
| } | |
| if (lp->supply) { | |
| ret = regulator_enable(lp->supply); | |
| if (ret < 0) { | |
| dev_err(&cl->dev, "failed to enable supply: %d\n", ret); | |
| return ret; | |
| } | |
| } | |
| if (lp->enable) { | |
| ret = regulator_enable(lp->enable); | |
| if (ret < 0) { | |
| dev_err(lp->dev, "failed to enable vddio: %d\n", ret); | |
| return ret; | |
| } | |
| /* | |
| * LP8555 datasheet says t_RESPONSE (time between VDDIO and | |
| * I2C) is 1ms. | |
| */ | |
| usleep_range(1000, 2000); | |
| } | |
| i2c_set_clientdata(cl, lp); | |
| ret = lp855x_configure(lp); | |
| if (ret) { | |
| dev_err(lp->dev, "device config err: %d", ret); | |
| return ret; | |
| } | |
| ret = lp855x_backlight_register(lp); | |
| if (ret) { | |
| dev_err(lp->dev, | |
| "failed to register backlight. err: %d\n", ret); | |
| return ret; | |
| } | |
| ret = sysfs_create_group(&lp->dev->kobj, &lp855x_attr_group); | |
| if (ret) { | |
| dev_err(lp->dev, "failed to register sysfs. err: %d\n", ret); | |
| return ret; | |
| } | |
| backlight_update_status(lp->bl); | |
| return 0; | |
| } | |
| static int lp855x_remove(struct i2c_client *cl) | |
| { | |
| struct lp855x *lp = i2c_get_clientdata(cl); | |
| lp->bl->props.brightness = 0; | |
| backlight_update_status(lp->bl); | |
| if (lp->supply) | |
| regulator_disable(lp->supply); | |
| sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group); | |
| return 0; | |
| } | |
| static const struct of_device_id lp855x_dt_ids[] = { | |
| { .compatible = "ti,lp8550", }, | |
| { .compatible = "ti,lp8551", }, | |
| { .compatible = "ti,lp8552", }, | |
| { .compatible = "ti,lp8553", }, | |
| { .compatible = "ti,lp8555", }, | |
| { .compatible = "ti,lp8556", }, | |
| { .compatible = "ti,lp8557", }, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(of, lp855x_dt_ids); | |
| static const struct i2c_device_id lp855x_ids[] = { | |
| {"lp8550", LP8550}, | |
| {"lp8551", LP8551}, | |
| {"lp8552", LP8552}, | |
| {"lp8553", LP8553}, | |
| {"lp8555", LP8555}, | |
| {"lp8556", LP8556}, | |
| {"lp8557", LP8557}, | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(i2c, lp855x_ids); | |
| static struct i2c_driver lp855x_driver = { | |
| .driver = { | |
| .name = "lp855x", | |
| .of_match_table = of_match_ptr(lp855x_dt_ids), | |
| }, | |
| .probe = lp855x_probe, | |
| .remove = lp855x_remove, | |
| .id_table = lp855x_ids, | |
| }; | |
| module_i2c_driver(lp855x_driver); | |
| MODULE_DESCRIPTION("Texas Instruments LP855x Backlight driver"); | |
| MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>"); | |
| MODULE_LICENSE("GPL"); |