| /* Copyright (c) 2009 - 2016 Freescale Semiconductor, Inc. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * * Neither the name of Freescale Semiconductor nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * ALTERNATIVELY, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") as published by the Free Software |
| * Foundation, either version 2 of that License or (at your option) any |
| * later version. |
| * |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "bman_priv.h" |
| |
| u16 bman_ip_rev; |
| EXPORT_SYMBOL(bman_ip_rev); |
| |
| /* Register offsets */ |
| #define REG_FBPR_FPC 0x0800 |
| #define REG_ECSR 0x0a00 |
| #define REG_ECIR 0x0a04 |
| #define REG_EADR 0x0a08 |
| #define REG_EDATA(n) (0x0a10 + ((n) * 0x04)) |
| #define REG_SBEC(n) (0x0a80 + ((n) * 0x04)) |
| #define REG_IP_REV_1 0x0bf8 |
| #define REG_IP_REV_2 0x0bfc |
| #define REG_FBPR_BARE 0x0c00 |
| #define REG_FBPR_BAR 0x0c04 |
| #define REG_FBPR_AR 0x0c10 |
| #define REG_SRCIDR 0x0d04 |
| #define REG_LIODNR 0x0d08 |
| #define REG_ERR_ISR 0x0e00 |
| #define REG_ERR_IER 0x0e04 |
| #define REG_ERR_ISDR 0x0e08 |
| |
| /* Used by all error interrupt registers except 'inhibit' */ |
| #define BM_EIRQ_IVCI 0x00000010 /* Invalid Command Verb */ |
| #define BM_EIRQ_FLWI 0x00000008 /* FBPR Low Watermark */ |
| #define BM_EIRQ_MBEI 0x00000004 /* Multi-bit ECC Error */ |
| #define BM_EIRQ_SBEI 0x00000002 /* Single-bit ECC Error */ |
| #define BM_EIRQ_BSCN 0x00000001 /* pool State Change Notification */ |
| |
| struct bman_hwerr_txt { |
| u32 mask; |
| const char *txt; |
| }; |
| |
| static const struct bman_hwerr_txt bman_hwerr_txts[] = { |
| { BM_EIRQ_IVCI, "Invalid Command Verb" }, |
| { BM_EIRQ_FLWI, "FBPR Low Watermark" }, |
| { BM_EIRQ_MBEI, "Multi-bit ECC Error" }, |
| { BM_EIRQ_SBEI, "Single-bit ECC Error" }, |
| { BM_EIRQ_BSCN, "Pool State Change Notification" }, |
| }; |
| |
| /* Only trigger low water mark interrupt once only */ |
| #define BMAN_ERRS_TO_DISABLE BM_EIRQ_FLWI |
| |
| /* Pointer to the start of the BMan's CCSR space */ |
| static u32 __iomem *bm_ccsr_start; |
| |
| static inline u32 bm_ccsr_in(u32 offset) |
| { |
| return ioread32be(bm_ccsr_start + offset/4); |
| } |
| static inline void bm_ccsr_out(u32 offset, u32 val) |
| { |
| iowrite32be(val, bm_ccsr_start + offset/4); |
| } |
| |
| static void bm_get_version(u16 *id, u8 *major, u8 *minor) |
| { |
| u32 v = bm_ccsr_in(REG_IP_REV_1); |
| *id = (v >> 16); |
| *major = (v >> 8) & 0xff; |
| *minor = v & 0xff; |
| } |
| |
| /* signal transactions for FBPRs with higher priority */ |
| #define FBPR_AR_RPRIO_HI BIT(30) |
| |
| static void bm_set_memory(u64 ba, u32 size) |
| { |
| u32 exp = ilog2(size); |
| /* choke if size isn't within range */ |
| DPAA_ASSERT(size >= 4096 && size <= 1024*1024*1024 && |
| is_power_of_2(size)); |
| /* choke if '[e]ba' has lower-alignment than 'size' */ |
| DPAA_ASSERT(!(ba & (size - 1))); |
| bm_ccsr_out(REG_FBPR_BARE, upper_32_bits(ba)); |
| bm_ccsr_out(REG_FBPR_BAR, lower_32_bits(ba)); |
| bm_ccsr_out(REG_FBPR_AR, exp - 1); |
| } |
| |
| /* |
| * Location and size of BMan private memory |
| * |
| * Ideally we would use the DMA API to turn rmem->base into a DMA address |
| * (especially if iommu translations ever get involved). Unfortunately, the |
| * DMA API currently does not allow mapping anything that is not backed with |
| * a struct page. |
| */ |
| static dma_addr_t fbpr_a; |
| static size_t fbpr_sz; |
| |
| static int bman_fbpr(struct reserved_mem *rmem) |
| { |
| fbpr_a = rmem->base; |
| fbpr_sz = rmem->size; |
| |
| WARN_ON(!(fbpr_a && fbpr_sz)); |
| |
| return 0; |
| } |
| RESERVEDMEM_OF_DECLARE(bman_fbpr, "fsl,bman-fbpr", bman_fbpr); |
| |
| static irqreturn_t bman_isr(int irq, void *ptr) |
| { |
| u32 isr_val, ier_val, ecsr_val, isr_mask, i; |
| struct device *dev = ptr; |
| |
| ier_val = bm_ccsr_in(REG_ERR_IER); |
| isr_val = bm_ccsr_in(REG_ERR_ISR); |
| ecsr_val = bm_ccsr_in(REG_ECSR); |
| isr_mask = isr_val & ier_val; |
| |
| if (!isr_mask) |
| return IRQ_NONE; |
| |
| for (i = 0; i < ARRAY_SIZE(bman_hwerr_txts); i++) { |
| if (bman_hwerr_txts[i].mask & isr_mask) { |
| dev_err_ratelimited(dev, "ErrInt: %s\n", |
| bman_hwerr_txts[i].txt); |
| if (bman_hwerr_txts[i].mask & ecsr_val) { |
| /* Re-arm error capture registers */ |
| bm_ccsr_out(REG_ECSR, ecsr_val); |
| } |
| if (bman_hwerr_txts[i].mask & BMAN_ERRS_TO_DISABLE) { |
| dev_dbg(dev, "Disabling error 0x%x\n", |
| bman_hwerr_txts[i].mask); |
| ier_val &= ~bman_hwerr_txts[i].mask; |
| bm_ccsr_out(REG_ERR_IER, ier_val); |
| } |
| } |
| } |
| bm_ccsr_out(REG_ERR_ISR, isr_val); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int fsl_bman_probe(struct platform_device *pdev) |
| { |
| int ret, err_irq; |
| struct device *dev = &pdev->dev; |
| struct device_node *node = dev->of_node; |
| struct resource *res; |
| u16 id, bm_pool_cnt; |
| u8 major, minor; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(dev, "Can't get %pOF property 'IORESOURCE_MEM'\n", |
| node); |
| return -ENXIO; |
| } |
| bm_ccsr_start = devm_ioremap(dev, res->start, resource_size(res)); |
| if (!bm_ccsr_start) |
| return -ENXIO; |
| |
| bm_get_version(&id, &major, &minor); |
| if (major == 1 && minor == 0) { |
| bman_ip_rev = BMAN_REV10; |
| bm_pool_cnt = BM_POOL_MAX; |
| } else if (major == 2 && minor == 0) { |
| bman_ip_rev = BMAN_REV20; |
| bm_pool_cnt = 8; |
| } else if (major == 2 && minor == 1) { |
| bman_ip_rev = BMAN_REV21; |
| bm_pool_cnt = BM_POOL_MAX; |
| } else { |
| dev_err(dev, "Unknown Bman version:%04x,%02x,%02x\n", |
| id, major, minor); |
| return -ENODEV; |
| } |
| |
| /* |
| * If FBPR memory wasn't defined using the qbman compatible string |
| * try using the of_reserved_mem_device method |
| */ |
| if (!fbpr_a) { |
| ret = qbman_init_private_mem(dev, 0, &fbpr_a, &fbpr_sz); |
| if (ret) { |
| dev_err(dev, "qbman_init_private_mem() failed 0x%x\n", |
| ret); |
| return -ENODEV; |
| } |
| } |
| |
| dev_dbg(dev, "Allocated FBPR 0x%llx 0x%zx\n", fbpr_a, fbpr_sz); |
| |
| bm_set_memory(fbpr_a, fbpr_sz); |
| |
| err_irq = platform_get_irq(pdev, 0); |
| if (err_irq <= 0) { |
| dev_info(dev, "Can't get %pOF IRQ\n", node); |
| return -ENODEV; |
| } |
| ret = devm_request_irq(dev, err_irq, bman_isr, IRQF_SHARED, "bman-err", |
| dev); |
| if (ret) { |
| dev_err(dev, "devm_request_irq() failed %d for '%pOF'\n", |
| ret, node); |
| return ret; |
| } |
| /* Disable Buffer Pool State Change */ |
| bm_ccsr_out(REG_ERR_ISDR, BM_EIRQ_BSCN); |
| /* |
| * Write-to-clear any stale bits, (eg. starvation being asserted prior |
| * to resource allocation during driver init). |
| */ |
| bm_ccsr_out(REG_ERR_ISR, 0xffffffff); |
| /* Enable Error Interrupts */ |
| bm_ccsr_out(REG_ERR_IER, 0xffffffff); |
| |
| bm_bpalloc = devm_gen_pool_create(dev, 0, -1, "bman-bpalloc"); |
| if (IS_ERR(bm_bpalloc)) { |
| ret = PTR_ERR(bm_bpalloc); |
| dev_err(dev, "bman-bpalloc pool init failed (%d)\n", ret); |
| return ret; |
| } |
| |
| /* seed BMan resource pool */ |
| ret = gen_pool_add(bm_bpalloc, DPAA_GENALLOC_OFF, bm_pool_cnt, -1); |
| if (ret) { |
| dev_err(dev, "Failed to seed BPID range [%d..%d] (%d)\n", |
| 0, bm_pool_cnt - 1, ret); |
| return ret; |
| } |
| |
| return 0; |
| }; |
| |
| static const struct of_device_id fsl_bman_ids[] = { |
| { |
| .compatible = "fsl,bman", |
| }, |
| {} |
| }; |
| |
| static struct platform_driver fsl_bman_driver = { |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = fsl_bman_ids, |
| .suppress_bind_attrs = true, |
| }, |
| .probe = fsl_bman_probe, |
| }; |
| |
| builtin_platform_driver(fsl_bman_driver); |