| /* Advanced Micro Devices Inc. AMD8111E Linux Network Driver | |
| * Copyright (C) 2004 Advanced Micro Devices | |
| * | |
| * | |
| * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ] | |
| * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c] | |
| * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ] | |
| * Derived from the lance driver written 1993,1994,1995 by Donald Becker. | |
| * Copyright 1993 United States Government as represented by the | |
| * Director, National Security Agency.[ pcnet32.c ] | |
| * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ] | |
| * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. | |
| * | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, see <http://www.gnu.org/licenses/>. | |
| Module Name: | |
| amd8111e.c | |
| Abstract: | |
| AMD8111 based 10/100 Ethernet Controller Driver. | |
| Environment: | |
| Kernel Mode | |
| Revision History: | |
| 3.0.0 | |
| Initial Revision. | |
| 3.0.1 | |
| 1. Dynamic interrupt coalescing. | |
| 2. Removed prev_stats. | |
| 3. MII support. | |
| 4. Dynamic IPG support | |
| 3.0.2 05/29/2003 | |
| 1. Bug fix: Fixed failure to send jumbo packets larger than 4k. | |
| 2. Bug fix: Fixed VLAN support failure. | |
| 3. Bug fix: Fixed receive interrupt coalescing bug. | |
| 4. Dynamic IPG support is disabled by default. | |
| 3.0.3 06/05/2003 | |
| 1. Bug fix: Fixed failure to close the interface if SMP is enabled. | |
| 3.0.4 12/09/2003 | |
| 1. Added set_mac_address routine for bonding driver support. | |
| 2. Tested the driver for bonding support | |
| 3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth | |
| indicated to the h/w. | |
| 4. Modified amd8111e_rx() routine to receive all the received packets | |
| in the first interrupt. | |
| 5. Bug fix: Corrected rx_errors reported in get_stats() function. | |
| 3.0.5 03/22/2004 | |
| 1. Added NAPI support | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/types.h> | |
| #include <linux/compiler.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/ioport.h> | |
| #include <linux/pci.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/ethtool.h> | |
| #include <linux/mii.h> | |
| #include <linux/if_vlan.h> | |
| #include <linux/ctype.h> | |
| #include <linux/crc32.h> | |
| #include <linux/dma-mapping.h> | |
| #include <asm/io.h> | |
| #include <asm/byteorder.h> | |
| #include <linux/uaccess.h> | |
| #if IS_ENABLED(CONFIG_VLAN_8021Q) | |
| #define AMD8111E_VLAN_TAG_USED 1 | |
| #else | |
| #define AMD8111E_VLAN_TAG_USED 0 | |
| #endif | |
| #include "amd8111e.h" | |
| #define MODULE_NAME "amd8111e" | |
| #define MODULE_VERS "3.0.7" | |
| MODULE_AUTHOR("Advanced Micro Devices, Inc."); | |
| MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS); | |
| MODULE_LICENSE("GPL"); | |
| module_param_array(speed_duplex, int, NULL, 0); | |
| MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex"); | |
| module_param_array(coalesce, bool, NULL, 0); | |
| MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable"); | |
| module_param_array(dynamic_ipg, bool, NULL, 0); | |
| MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable"); | |
| /* This function will read the PHY registers. */ | |
| static int amd8111e_read_phy(struct amd8111e_priv *lp, | |
| int phy_id, int reg, u32 *val) | |
| { | |
| void __iomem *mmio = lp->mmio; | |
| unsigned int reg_val; | |
| unsigned int repeat= REPEAT_CNT; | |
| reg_val = readl(mmio + PHY_ACCESS); | |
| while (reg_val & PHY_CMD_ACTIVE) | |
| reg_val = readl( mmio + PHY_ACCESS ); | |
| writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) | | |
| ((reg & 0x1f) << 16), mmio +PHY_ACCESS); | |
| do{ | |
| reg_val = readl(mmio + PHY_ACCESS); | |
| udelay(30); /* It takes 30 us to read/write data */ | |
| } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); | |
| if(reg_val & PHY_RD_ERR) | |
| goto err_phy_read; | |
| *val = reg_val & 0xffff; | |
| return 0; | |
| err_phy_read: | |
| *val = 0; | |
| return -EINVAL; | |
| } | |
| /* This function will write into PHY registers. */ | |
| static int amd8111e_write_phy(struct amd8111e_priv *lp, | |
| int phy_id, int reg, u32 val) | |
| { | |
| unsigned int repeat = REPEAT_CNT; | |
| void __iomem *mmio = lp->mmio; | |
| unsigned int reg_val; | |
| reg_val = readl(mmio + PHY_ACCESS); | |
| while (reg_val & PHY_CMD_ACTIVE) | |
| reg_val = readl( mmio + PHY_ACCESS ); | |
| writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) | | |
| ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS); | |
| do{ | |
| reg_val = readl(mmio + PHY_ACCESS); | |
| udelay(30); /* It takes 30 us to read/write the data */ | |
| } while (--repeat && (reg_val & PHY_CMD_ACTIVE)); | |
| if(reg_val & PHY_RD_ERR) | |
| goto err_phy_write; | |
| return 0; | |
| err_phy_write: | |
| return -EINVAL; | |
| } | |
| /* This is the mii register read function provided to the mii interface. */ | |
| static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| unsigned int reg_val; | |
| amd8111e_read_phy(lp,phy_id,reg_num,®_val); | |
| return reg_val; | |
| } | |
| /* This is the mii register write function provided to the mii interface. */ | |
| static void amd8111e_mdio_write(struct net_device *dev, | |
| int phy_id, int reg_num, int val) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| amd8111e_write_phy(lp, phy_id, reg_num, val); | |
| } | |
| /* This function will set PHY speed. During initialization sets | |
| * the original speed to 100 full | |
| */ | |
| static void amd8111e_set_ext_phy(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| u32 bmcr,advert,tmp; | |
| /* Determine mii register values to set the speed */ | |
| advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE); | |
| tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4); | |
| switch (lp->ext_phy_option){ | |
| default: | |
| case SPEED_AUTONEG: /* advertise all values */ | |
| tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL| | |
| ADVERTISE_100HALF|ADVERTISE_100FULL) ; | |
| break; | |
| case SPEED10_HALF: | |
| tmp |= ADVERTISE_10HALF; | |
| break; | |
| case SPEED10_FULL: | |
| tmp |= ADVERTISE_10FULL; | |
| break; | |
| case SPEED100_HALF: | |
| tmp |= ADVERTISE_100HALF; | |
| break; | |
| case SPEED100_FULL: | |
| tmp |= ADVERTISE_100FULL; | |
| break; | |
| } | |
| if(advert != tmp) | |
| amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp); | |
| /* Restart auto negotiation */ | |
| bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR); | |
| bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART); | |
| amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr); | |
| } | |
| /* This function will unmap skb->data space and will free | |
| * all transmit and receive skbuffs. | |
| */ | |
| static int amd8111e_free_skbs(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| struct sk_buff *rx_skbuff; | |
| int i; | |
| /* Freeing transmit skbs */ | |
| for(i = 0; i < NUM_TX_BUFFERS; i++){ | |
| if(lp->tx_skbuff[i]){ | |
| pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE); | |
| dev_kfree_skb (lp->tx_skbuff[i]); | |
| lp->tx_skbuff[i] = NULL; | |
| lp->tx_dma_addr[i] = 0; | |
| } | |
| } | |
| /* Freeing previously allocated receive buffers */ | |
| for (i = 0; i < NUM_RX_BUFFERS; i++){ | |
| rx_skbuff = lp->rx_skbuff[i]; | |
| if(rx_skbuff != NULL){ | |
| pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i], | |
| lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE); | |
| dev_kfree_skb(lp->rx_skbuff[i]); | |
| lp->rx_skbuff[i] = NULL; | |
| lp->rx_dma_addr[i] = 0; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* This will set the receive buffer length corresponding | |
| * to the mtu size of networkinterface. | |
| */ | |
| static inline void amd8111e_set_rx_buff_len(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| unsigned int mtu = dev->mtu; | |
| if (mtu > ETH_DATA_LEN){ | |
| /* MTU + ethernet header + FCS | |
| * + optional VLAN tag + skb reserve space 2 | |
| */ | |
| lp->rx_buff_len = mtu + ETH_HLEN + 10; | |
| lp->options |= OPTION_JUMBO_ENABLE; | |
| } else{ | |
| lp->rx_buff_len = PKT_BUFF_SZ; | |
| lp->options &= ~OPTION_JUMBO_ENABLE; | |
| } | |
| } | |
| /* This function will free all the previously allocated buffers, | |
| * determine new receive buffer length and will allocate new receive buffers. | |
| * This function also allocates and initializes both the transmitter | |
| * and receive hardware descriptors. | |
| */ | |
| static int amd8111e_init_ring(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int i; | |
| lp->rx_idx = lp->tx_idx = 0; | |
| lp->tx_complete_idx = 0; | |
| lp->tx_ring_idx = 0; | |
| if(lp->opened) | |
| /* Free previously allocated transmit and receive skbs */ | |
| amd8111e_free_skbs(dev); | |
| else{ | |
| /* allocate the tx and rx descriptors */ | |
| if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev, | |
| sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR, | |
| &lp->tx_ring_dma_addr)) == NULL) | |
| goto err_no_mem; | |
| if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev, | |
| sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR, | |
| &lp->rx_ring_dma_addr)) == NULL) | |
| goto err_free_tx_ring; | |
| } | |
| /* Set new receive buff size */ | |
| amd8111e_set_rx_buff_len(dev); | |
| /* Allocating receive skbs */ | |
| for (i = 0; i < NUM_RX_BUFFERS; i++) { | |
| lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len); | |
| if (!lp->rx_skbuff[i]) { | |
| /* Release previos allocated skbs */ | |
| for(--i; i >= 0 ;i--) | |
| dev_kfree_skb(lp->rx_skbuff[i]); | |
| goto err_free_rx_ring; | |
| } | |
| skb_reserve(lp->rx_skbuff[i],2); | |
| } | |
| /* Initilaizing receive descriptors */ | |
| for (i = 0; i < NUM_RX_BUFFERS; i++) { | |
| lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev, | |
| lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE); | |
| lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]); | |
| lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2); | |
| wmb(); | |
| lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT); | |
| } | |
| /* Initializing transmit descriptors */ | |
| for (i = 0; i < NUM_TX_RING_DR; i++) { | |
| lp->tx_ring[i].buff_phy_addr = 0; | |
| lp->tx_ring[i].tx_flags = 0; | |
| lp->tx_ring[i].buff_count = 0; | |
| } | |
| return 0; | |
| err_free_rx_ring: | |
| pci_free_consistent(lp->pci_dev, | |
| sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring, | |
| lp->rx_ring_dma_addr); | |
| err_free_tx_ring: | |
| pci_free_consistent(lp->pci_dev, | |
| sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring, | |
| lp->tx_ring_dma_addr); | |
| err_no_mem: | |
| return -ENOMEM; | |
| } | |
| /* This function will set the interrupt coalescing according | |
| * to the input arguments | |
| */ | |
| static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod) | |
| { | |
| unsigned int timeout; | |
| unsigned int event_count; | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| void __iomem *mmio = lp->mmio; | |
| struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; | |
| switch(cmod) | |
| { | |
| case RX_INTR_COAL : | |
| timeout = coal_conf->rx_timeout; | |
| event_count = coal_conf->rx_event_count; | |
| if( timeout > MAX_TIMEOUT || | |
| event_count > MAX_EVENT_COUNT ) | |
| return -EINVAL; | |
| timeout = timeout * DELAY_TIMER_CONV; | |
| writel(VAL0|STINTEN, mmio+INTEN0); | |
| writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout, | |
| mmio+DLY_INT_A); | |
| break; | |
| case TX_INTR_COAL : | |
| timeout = coal_conf->tx_timeout; | |
| event_count = coal_conf->tx_event_count; | |
| if( timeout > MAX_TIMEOUT || | |
| event_count > MAX_EVENT_COUNT ) | |
| return -EINVAL; | |
| timeout = timeout * DELAY_TIMER_CONV; | |
| writel(VAL0|STINTEN,mmio+INTEN0); | |
| writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout, | |
| mmio+DLY_INT_B); | |
| break; | |
| case DISABLE_COAL: | |
| writel(0,mmio+STVAL); | |
| writel(STINTEN, mmio+INTEN0); | |
| writel(0, mmio +DLY_INT_B); | |
| writel(0, mmio+DLY_INT_A); | |
| break; | |
| case ENABLE_COAL: | |
| /* Start the timer */ | |
| writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */ | |
| writel(VAL0|STINTEN, mmio+INTEN0); | |
| break; | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| /* This function initializes the device registers and starts the device. */ | |
| static int amd8111e_restart(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| void __iomem *mmio = lp->mmio; | |
| int i,reg_val; | |
| /* stop the chip */ | |
| writel(RUN, mmio + CMD0); | |
| if(amd8111e_init_ring(dev)) | |
| return -ENOMEM; | |
| /* enable the port manager and set auto negotiation always */ | |
| writel((u32) VAL1|EN_PMGR, mmio + CMD3 ); | |
| writel((u32)XPHYANE|XPHYRST , mmio + CTRL2); | |
| amd8111e_set_ext_phy(dev); | |
| /* set control registers */ | |
| reg_val = readl(mmio + CTRL1); | |
| reg_val &= ~XMTSP_MASK; | |
| writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 ); | |
| /* enable interrupt */ | |
| writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN | | |
| APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN | | |
| SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0); | |
| writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0); | |
| /* initialize tx and rx ring base addresses */ | |
| writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0); | |
| writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0); | |
| writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0); | |
| writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0); | |
| /* set default IPG to 96 */ | |
| writew((u32)DEFAULT_IPG,mmio+IPG); | |
| writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1); | |
| if(lp->options & OPTION_JUMBO_ENABLE){ | |
| writel((u32)VAL2|JUMBO, mmio + CMD3); | |
| /* Reset REX_UFLO */ | |
| writel( REX_UFLO, mmio + CMD2); | |
| /* Should not set REX_UFLO for jumbo frames */ | |
| writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2); | |
| }else{ | |
| writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2); | |
| writel((u32)JUMBO, mmio + CMD3); | |
| } | |
| #if AMD8111E_VLAN_TAG_USED | |
| writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3); | |
| #endif | |
| writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 ); | |
| /* Setting the MAC address to the device */ | |
| for (i = 0; i < ETH_ALEN; i++) | |
| writeb( dev->dev_addr[i], mmio + PADR + i ); | |
| /* Enable interrupt coalesce */ | |
| if(lp->options & OPTION_INTR_COAL_ENABLE){ | |
| netdev_info(dev, "Interrupt Coalescing Enabled.\n"); | |
| amd8111e_set_coalesce(dev,ENABLE_COAL); | |
| } | |
| /* set RUN bit to start the chip */ | |
| writel(VAL2 | RDMD0, mmio + CMD0); | |
| writel(VAL0 | INTREN | RUN, mmio + CMD0); | |
| /* To avoid PCI posting bug */ | |
| readl(mmio+CMD0); | |
| return 0; | |
| } | |
| /* This function clears necessary the device registers. */ | |
| static void amd8111e_init_hw_default(struct amd8111e_priv *lp) | |
| { | |
| unsigned int reg_val; | |
| unsigned int logic_filter[2] ={0,}; | |
| void __iomem *mmio = lp->mmio; | |
| /* stop the chip */ | |
| writel(RUN, mmio + CMD0); | |
| /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */ | |
| writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0); | |
| /* Clear RCV_RING_BASE_ADDR */ | |
| writel(0, mmio + RCV_RING_BASE_ADDR0); | |
| /* Clear XMT_RING_BASE_ADDR */ | |
| writel(0, mmio + XMT_RING_BASE_ADDR0); | |
| writel(0, mmio + XMT_RING_BASE_ADDR1); | |
| writel(0, mmio + XMT_RING_BASE_ADDR2); | |
| writel(0, mmio + XMT_RING_BASE_ADDR3); | |
| /* Clear CMD0 */ | |
| writel(CMD0_CLEAR,mmio + CMD0); | |
| /* Clear CMD2 */ | |
| writel(CMD2_CLEAR, mmio +CMD2); | |
| /* Clear CMD7 */ | |
| writel(CMD7_CLEAR , mmio + CMD7); | |
| /* Clear DLY_INT_A and DLY_INT_B */ | |
| writel(0x0, mmio + DLY_INT_A); | |
| writel(0x0, mmio + DLY_INT_B); | |
| /* Clear FLOW_CONTROL */ | |
| writel(0x0, mmio + FLOW_CONTROL); | |
| /* Clear INT0 write 1 to clear register */ | |
| reg_val = readl(mmio + INT0); | |
| writel(reg_val, mmio + INT0); | |
| /* Clear STVAL */ | |
| writel(0x0, mmio + STVAL); | |
| /* Clear INTEN0 */ | |
| writel( INTEN0_CLEAR, mmio + INTEN0); | |
| /* Clear LADRF */ | |
| writel(0x0 , mmio + LADRF); | |
| /* Set SRAM_SIZE & SRAM_BOUNDARY registers */ | |
| writel( 0x80010,mmio + SRAM_SIZE); | |
| /* Clear RCV_RING0_LEN */ | |
| writel(0x0, mmio + RCV_RING_LEN0); | |
| /* Clear XMT_RING0/1/2/3_LEN */ | |
| writel(0x0, mmio + XMT_RING_LEN0); | |
| writel(0x0, mmio + XMT_RING_LEN1); | |
| writel(0x0, mmio + XMT_RING_LEN2); | |
| writel(0x0, mmio + XMT_RING_LEN3); | |
| /* Clear XMT_RING_LIMIT */ | |
| writel(0x0, mmio + XMT_RING_LIMIT); | |
| /* Clear MIB */ | |
| writew(MIB_CLEAR, mmio + MIB_ADDR); | |
| /* Clear LARF */ | |
| amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF); | |
| /* SRAM_SIZE register */ | |
| reg_val = readl(mmio + SRAM_SIZE); | |
| if(lp->options & OPTION_JUMBO_ENABLE) | |
| writel( VAL2|JUMBO, mmio + CMD3); | |
| #if AMD8111E_VLAN_TAG_USED | |
| writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 ); | |
| #endif | |
| /* Set default value to CTRL1 Register */ | |
| writel(CTRL1_DEFAULT, mmio + CTRL1); | |
| /* To avoid PCI posting bug */ | |
| readl(mmio + CMD2); | |
| } | |
| /* This function disables the interrupt and clears all the pending | |
| * interrupts in INT0 | |
| */ | |
| static void amd8111e_disable_interrupt(struct amd8111e_priv *lp) | |
| { | |
| u32 intr0; | |
| /* Disable interrupt */ | |
| writel(INTREN, lp->mmio + CMD0); | |
| /* Clear INT0 */ | |
| intr0 = readl(lp->mmio + INT0); | |
| writel(intr0, lp->mmio + INT0); | |
| /* To avoid PCI posting bug */ | |
| readl(lp->mmio + INT0); | |
| } | |
| /* This function stops the chip. */ | |
| static void amd8111e_stop_chip(struct amd8111e_priv *lp) | |
| { | |
| writel(RUN, lp->mmio + CMD0); | |
| /* To avoid PCI posting bug */ | |
| readl(lp->mmio + CMD0); | |
| } | |
| /* This function frees the transmiter and receiver descriptor rings. */ | |
| static void amd8111e_free_ring(struct amd8111e_priv *lp) | |
| { | |
| /* Free transmit and receive descriptor rings */ | |
| if(lp->rx_ring){ | |
| pci_free_consistent(lp->pci_dev, | |
| sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR, | |
| lp->rx_ring, lp->rx_ring_dma_addr); | |
| lp->rx_ring = NULL; | |
| } | |
| if(lp->tx_ring){ | |
| pci_free_consistent(lp->pci_dev, | |
| sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR, | |
| lp->tx_ring, lp->tx_ring_dma_addr); | |
| lp->tx_ring = NULL; | |
| } | |
| } | |
| /* This function will free all the transmit skbs that are actually | |
| * transmitted by the device. It will check the ownership of the | |
| * skb before freeing the skb. | |
| */ | |
| static int amd8111e_tx(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int tx_index; | |
| int status; | |
| /* Complete all the transmit packet */ | |
| while (lp->tx_complete_idx != lp->tx_idx){ | |
| tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK; | |
| status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags); | |
| if(status & OWN_BIT) | |
| break; /* It still hasn't been Txed */ | |
| lp->tx_ring[tx_index].buff_phy_addr = 0; | |
| /* We must free the original skb */ | |
| if (lp->tx_skbuff[tx_index]) { | |
| pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index], | |
| lp->tx_skbuff[tx_index]->len, | |
| PCI_DMA_TODEVICE); | |
| dev_kfree_skb_irq (lp->tx_skbuff[tx_index]); | |
| lp->tx_skbuff[tx_index] = NULL; | |
| lp->tx_dma_addr[tx_index] = 0; | |
| } | |
| lp->tx_complete_idx++; | |
| /*COAL update tx coalescing parameters */ | |
| lp->coal_conf.tx_packets++; | |
| lp->coal_conf.tx_bytes += | |
| le16_to_cpu(lp->tx_ring[tx_index].buff_count); | |
| if (netif_queue_stopped(dev) && | |
| lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){ | |
| /* The ring is no longer full, clear tbusy. */ | |
| /* lp->tx_full = 0; */ | |
| netif_wake_queue (dev); | |
| } | |
| } | |
| return 0; | |
| } | |
| /* This function handles the driver receive operation in polling mode */ | |
| static int amd8111e_rx_poll(struct napi_struct *napi, int budget) | |
| { | |
| struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi); | |
| struct net_device *dev = lp->amd8111e_net_dev; | |
| int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK; | |
| void __iomem *mmio = lp->mmio; | |
| struct sk_buff *skb,*new_skb; | |
| int min_pkt_len, status; | |
| int num_rx_pkt = 0; | |
| short pkt_len; | |
| #if AMD8111E_VLAN_TAG_USED | |
| short vtag; | |
| #endif | |
| while (num_rx_pkt < budget) { | |
| status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags); | |
| if (status & OWN_BIT) | |
| break; | |
| /* There is a tricky error noted by John Murphy, | |
| * <murf@perftech.com> to Russ Nelson: Even with | |
| * full-sized * buffers it's possible for a | |
| * jabber packet to use two buffers, with only | |
| * the last correctly noting the error. | |
| */ | |
| if (status & ERR_BIT) { | |
| /* resetting flags */ | |
| lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; | |
| goto err_next_pkt; | |
| } | |
| /* check for STP and ENP */ | |
| if (!((status & STP_BIT) && (status & ENP_BIT))){ | |
| /* resetting flags */ | |
| lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; | |
| goto err_next_pkt; | |
| } | |
| pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4; | |
| #if AMD8111E_VLAN_TAG_USED | |
| vtag = status & TT_MASK; | |
| /* MAC will strip vlan tag */ | |
| if (vtag != 0) | |
| min_pkt_len = MIN_PKT_LEN - 4; | |
| else | |
| #endif | |
| min_pkt_len = MIN_PKT_LEN; | |
| if (pkt_len < min_pkt_len) { | |
| lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; | |
| lp->drv_rx_errors++; | |
| goto err_next_pkt; | |
| } | |
| new_skb = netdev_alloc_skb(dev, lp->rx_buff_len); | |
| if (!new_skb) { | |
| /* if allocation fail, | |
| * ignore that pkt and go to next one | |
| */ | |
| lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS; | |
| lp->drv_rx_errors++; | |
| goto err_next_pkt; | |
| } | |
| skb_reserve(new_skb, 2); | |
| skb = lp->rx_skbuff[rx_index]; | |
| pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index], | |
| lp->rx_buff_len-2, PCI_DMA_FROMDEVICE); | |
| skb_put(skb, pkt_len); | |
| lp->rx_skbuff[rx_index] = new_skb; | |
| lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev, | |
| new_skb->data, | |
| lp->rx_buff_len-2, | |
| PCI_DMA_FROMDEVICE); | |
| skb->protocol = eth_type_trans(skb, dev); | |
| #if AMD8111E_VLAN_TAG_USED | |
| if (vtag == TT_VLAN_TAGGED){ | |
| u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info); | |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag); | |
| } | |
| #endif | |
| napi_gro_receive(napi, skb); | |
| /* COAL update rx coalescing parameters */ | |
| lp->coal_conf.rx_packets++; | |
| lp->coal_conf.rx_bytes += pkt_len; | |
| num_rx_pkt++; | |
| err_next_pkt: | |
| lp->rx_ring[rx_index].buff_phy_addr | |
| = cpu_to_le32(lp->rx_dma_addr[rx_index]); | |
| lp->rx_ring[rx_index].buff_count = | |
| cpu_to_le16(lp->rx_buff_len-2); | |
| wmb(); | |
| lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT); | |
| rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK; | |
| } | |
| if (num_rx_pkt < budget && napi_complete_done(napi, num_rx_pkt)) { | |
| unsigned long flags; | |
| /* Receive descriptor is empty now */ | |
| spin_lock_irqsave(&lp->lock, flags); | |
| writel(VAL0|RINTEN0, mmio + INTEN0); | |
| writel(VAL2 | RDMD0, mmio + CMD0); | |
| spin_unlock_irqrestore(&lp->lock, flags); | |
| } | |
| return num_rx_pkt; | |
| } | |
| /* This function will indicate the link status to the kernel. */ | |
| static int amd8111e_link_change(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int status0,speed; | |
| /* read the link change */ | |
| status0 = readl(lp->mmio + STAT0); | |
| if(status0 & LINK_STATS){ | |
| if(status0 & AUTONEG_COMPLETE) | |
| lp->link_config.autoneg = AUTONEG_ENABLE; | |
| else | |
| lp->link_config.autoneg = AUTONEG_DISABLE; | |
| if(status0 & FULL_DPLX) | |
| lp->link_config.duplex = DUPLEX_FULL; | |
| else | |
| lp->link_config.duplex = DUPLEX_HALF; | |
| speed = (status0 & SPEED_MASK) >> 7; | |
| if(speed == PHY_SPEED_10) | |
| lp->link_config.speed = SPEED_10; | |
| else if(speed == PHY_SPEED_100) | |
| lp->link_config.speed = SPEED_100; | |
| netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n", | |
| (lp->link_config.speed == SPEED_100) ? | |
| "100" : "10", | |
| (lp->link_config.duplex == DUPLEX_FULL) ? | |
| "Full" : "Half"); | |
| netif_carrier_on(dev); | |
| } | |
| else{ | |
| lp->link_config.speed = SPEED_INVALID; | |
| lp->link_config.duplex = DUPLEX_INVALID; | |
| lp->link_config.autoneg = AUTONEG_INVALID; | |
| netdev_info(dev, "Link is Down.\n"); | |
| netif_carrier_off(dev); | |
| } | |
| return 0; | |
| } | |
| /* This function reads the mib counters. */ | |
| static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER) | |
| { | |
| unsigned int status; | |
| unsigned int data; | |
| unsigned int repeat = REPEAT_CNT; | |
| writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR); | |
| do { | |
| status = readw(mmio + MIB_ADDR); | |
| udelay(2); /* controller takes MAX 2 us to get mib data */ | |
| } | |
| while (--repeat && (status & MIB_CMD_ACTIVE)); | |
| data = readl(mmio + MIB_DATA); | |
| return data; | |
| } | |
| /* This function reads the mib registers and returns the hardware statistics. | |
| * It updates previous internal driver statistics with new values. | |
| */ | |
| static struct net_device_stats *amd8111e_get_stats(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| void __iomem *mmio = lp->mmio; | |
| unsigned long flags; | |
| struct net_device_stats *new_stats = &dev->stats; | |
| if (!lp->opened) | |
| return new_stats; | |
| spin_lock_irqsave (&lp->lock, flags); | |
| /* stats.rx_packets */ | |
| new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+ | |
| amd8111e_read_mib(mmio, rcv_multicast_pkts)+ | |
| amd8111e_read_mib(mmio, rcv_unicast_pkts); | |
| /* stats.tx_packets */ | |
| new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets); | |
| /*stats.rx_bytes */ | |
| new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets); | |
| /* stats.tx_bytes */ | |
| new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets); | |
| /* stats.rx_errors */ | |
| /* hw errors + errors driver reported */ | |
| new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+ | |
| amd8111e_read_mib(mmio, rcv_fragments)+ | |
| amd8111e_read_mib(mmio, rcv_jabbers)+ | |
| amd8111e_read_mib(mmio, rcv_alignment_errors)+ | |
| amd8111e_read_mib(mmio, rcv_fcs_errors)+ | |
| amd8111e_read_mib(mmio, rcv_miss_pkts)+ | |
| lp->drv_rx_errors; | |
| /* stats.tx_errors */ | |
| new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); | |
| /* stats.rx_dropped*/ | |
| new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts); | |
| /* stats.tx_dropped*/ | |
| new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts); | |
| /* stats.multicast*/ | |
| new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts); | |
| /* stats.collisions*/ | |
| new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions); | |
| /* stats.rx_length_errors*/ | |
| new_stats->rx_length_errors = | |
| amd8111e_read_mib(mmio, rcv_undersize_pkts)+ | |
| amd8111e_read_mib(mmio, rcv_oversize_pkts); | |
| /* stats.rx_over_errors*/ | |
| new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); | |
| /* stats.rx_crc_errors*/ | |
| new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors); | |
| /* stats.rx_frame_errors*/ | |
| new_stats->rx_frame_errors = | |
| amd8111e_read_mib(mmio, rcv_alignment_errors); | |
| /* stats.rx_fifo_errors */ | |
| new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); | |
| /* stats.rx_missed_errors */ | |
| new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts); | |
| /* stats.tx_aborted_errors*/ | |
| new_stats->tx_aborted_errors = | |
| amd8111e_read_mib(mmio, xmt_excessive_collision); | |
| /* stats.tx_carrier_errors*/ | |
| new_stats->tx_carrier_errors = | |
| amd8111e_read_mib(mmio, xmt_loss_carrier); | |
| /* stats.tx_fifo_errors*/ | |
| new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts); | |
| /* stats.tx_window_errors*/ | |
| new_stats->tx_window_errors = | |
| amd8111e_read_mib(mmio, xmt_late_collision); | |
| /* Reset the mibs for collecting new statistics */ | |
| /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/ | |
| spin_unlock_irqrestore (&lp->lock, flags); | |
| return new_stats; | |
| } | |
| /* This function recalculate the interrupt coalescing mode on every interrupt | |
| * according to the datarate and the packet rate. | |
| */ | |
| static int amd8111e_calc_coalesce(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf; | |
| int tx_pkt_rate; | |
| int rx_pkt_rate; | |
| int tx_data_rate; | |
| int rx_data_rate; | |
| int rx_pkt_size; | |
| int tx_pkt_size; | |
| tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets; | |
| coal_conf->tx_prev_packets = coal_conf->tx_packets; | |
| tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes; | |
| coal_conf->tx_prev_bytes = coal_conf->tx_bytes; | |
| rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets; | |
| coal_conf->rx_prev_packets = coal_conf->rx_packets; | |
| rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes; | |
| coal_conf->rx_prev_bytes = coal_conf->rx_bytes; | |
| if(rx_pkt_rate < 800){ | |
| if(coal_conf->rx_coal_type != NO_COALESCE){ | |
| coal_conf->rx_timeout = 0x0; | |
| coal_conf->rx_event_count = 0; | |
| amd8111e_set_coalesce(dev,RX_INTR_COAL); | |
| coal_conf->rx_coal_type = NO_COALESCE; | |
| } | |
| } | |
| else{ | |
| rx_pkt_size = rx_data_rate/rx_pkt_rate; | |
| if (rx_pkt_size < 128){ | |
| if(coal_conf->rx_coal_type != NO_COALESCE){ | |
| coal_conf->rx_timeout = 0; | |
| coal_conf->rx_event_count = 0; | |
| amd8111e_set_coalesce(dev,RX_INTR_COAL); | |
| coal_conf->rx_coal_type = NO_COALESCE; | |
| } | |
| } | |
| else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){ | |
| if(coal_conf->rx_coal_type != LOW_COALESCE){ | |
| coal_conf->rx_timeout = 1; | |
| coal_conf->rx_event_count = 4; | |
| amd8111e_set_coalesce(dev,RX_INTR_COAL); | |
| coal_conf->rx_coal_type = LOW_COALESCE; | |
| } | |
| } | |
| else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){ | |
| if(coal_conf->rx_coal_type != MEDIUM_COALESCE){ | |
| coal_conf->rx_timeout = 1; | |
| coal_conf->rx_event_count = 4; | |
| amd8111e_set_coalesce(dev,RX_INTR_COAL); | |
| coal_conf->rx_coal_type = MEDIUM_COALESCE; | |
| } | |
| } | |
| else if(rx_pkt_size >= 1024){ | |
| if(coal_conf->rx_coal_type != HIGH_COALESCE){ | |
| coal_conf->rx_timeout = 2; | |
| coal_conf->rx_event_count = 3; | |
| amd8111e_set_coalesce(dev,RX_INTR_COAL); | |
| coal_conf->rx_coal_type = HIGH_COALESCE; | |
| } | |
| } | |
| } | |
| /* NOW FOR TX INTR COALESC */ | |
| if(tx_pkt_rate < 800){ | |
| if(coal_conf->tx_coal_type != NO_COALESCE){ | |
| coal_conf->tx_timeout = 0x0; | |
| coal_conf->tx_event_count = 0; | |
| amd8111e_set_coalesce(dev,TX_INTR_COAL); | |
| coal_conf->tx_coal_type = NO_COALESCE; | |
| } | |
| } | |
| else{ | |
| tx_pkt_size = tx_data_rate/tx_pkt_rate; | |
| if (tx_pkt_size < 128){ | |
| if(coal_conf->tx_coal_type != NO_COALESCE){ | |
| coal_conf->tx_timeout = 0; | |
| coal_conf->tx_event_count = 0; | |
| amd8111e_set_coalesce(dev,TX_INTR_COAL); | |
| coal_conf->tx_coal_type = NO_COALESCE; | |
| } | |
| } | |
| else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){ | |
| if(coal_conf->tx_coal_type != LOW_COALESCE){ | |
| coal_conf->tx_timeout = 1; | |
| coal_conf->tx_event_count = 2; | |
| amd8111e_set_coalesce(dev,TX_INTR_COAL); | |
| coal_conf->tx_coal_type = LOW_COALESCE; | |
| } | |
| } | |
| else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){ | |
| if(coal_conf->tx_coal_type != MEDIUM_COALESCE){ | |
| coal_conf->tx_timeout = 2; | |
| coal_conf->tx_event_count = 5; | |
| amd8111e_set_coalesce(dev,TX_INTR_COAL); | |
| coal_conf->tx_coal_type = MEDIUM_COALESCE; | |
| } | |
| } else if (tx_pkt_size >= 1024) { | |
| if (coal_conf->tx_coal_type != HIGH_COALESCE) { | |
| coal_conf->tx_timeout = 4; | |
| coal_conf->tx_event_count = 8; | |
| amd8111e_set_coalesce(dev, TX_INTR_COAL); | |
| coal_conf->tx_coal_type = HIGH_COALESCE; | |
| } | |
| } | |
| } | |
| return 0; | |
| } | |
| /* This is device interrupt function. It handles transmit, | |
| * receive,link change and hardware timer interrupts. | |
| */ | |
| static irqreturn_t amd8111e_interrupt(int irq, void *dev_id) | |
| { | |
| struct net_device *dev = (struct net_device *)dev_id; | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| void __iomem *mmio = lp->mmio; | |
| unsigned int intr0, intren0; | |
| unsigned int handled = 1; | |
| if(unlikely(dev == NULL)) | |
| return IRQ_NONE; | |
| spin_lock(&lp->lock); | |
| /* disabling interrupt */ | |
| writel(INTREN, mmio + CMD0); | |
| /* Read interrupt status */ | |
| intr0 = readl(mmio + INT0); | |
| intren0 = readl(mmio + INTEN0); | |
| /* Process all the INT event until INTR bit is clear. */ | |
| if (!(intr0 & INTR)){ | |
| handled = 0; | |
| goto err_no_interrupt; | |
| } | |
| /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */ | |
| writel(intr0, mmio + INT0); | |
| /* Check if Receive Interrupt has occurred. */ | |
| if (intr0 & RINT0) { | |
| if (napi_schedule_prep(&lp->napi)) { | |
| /* Disable receive interupts */ | |
| writel(RINTEN0, mmio + INTEN0); | |
| /* Schedule a polling routine */ | |
| __napi_schedule(&lp->napi); | |
| } else if (intren0 & RINTEN0) { | |
| netdev_dbg(dev, "************Driver bug! interrupt while in poll\n"); | |
| /* Fix by disable receive interrupts */ | |
| writel(RINTEN0, mmio + INTEN0); | |
| } | |
| } | |
| /* Check if Transmit Interrupt has occurred. */ | |
| if (intr0 & TINT0) | |
| amd8111e_tx(dev); | |
| /* Check if Link Change Interrupt has occurred. */ | |
| if (intr0 & LCINT) | |
| amd8111e_link_change(dev); | |
| /* Check if Hardware Timer Interrupt has occurred. */ | |
| if (intr0 & STINT) | |
| amd8111e_calc_coalesce(dev); | |
| err_no_interrupt: | |
| writel( VAL0 | INTREN,mmio + CMD0); | |
| spin_unlock(&lp->lock); | |
| return IRQ_RETVAL(handled); | |
| } | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| static void amd8111e_poll(struct net_device *dev) | |
| { | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| amd8111e_interrupt(0, dev); | |
| local_irq_restore(flags); | |
| } | |
| #endif | |
| /* This function closes the network interface and updates | |
| * the statistics so that most recent statistics will be | |
| * available after the interface is down. | |
| */ | |
| static int amd8111e_close(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| netif_stop_queue(dev); | |
| napi_disable(&lp->napi); | |
| spin_lock_irq(&lp->lock); | |
| amd8111e_disable_interrupt(lp); | |
| amd8111e_stop_chip(lp); | |
| /* Free transmit and receive skbs */ | |
| amd8111e_free_skbs(lp->amd8111e_net_dev); | |
| netif_carrier_off(lp->amd8111e_net_dev); | |
| /* Delete ipg timer */ | |
| if(lp->options & OPTION_DYN_IPG_ENABLE) | |
| del_timer_sync(&lp->ipg_data.ipg_timer); | |
| spin_unlock_irq(&lp->lock); | |
| free_irq(dev->irq, dev); | |
| amd8111e_free_ring(lp); | |
| /* Update the statistics before closing */ | |
| amd8111e_get_stats(dev); | |
| lp->opened = 0; | |
| return 0; | |
| } | |
| /* This function opens new interface.It requests irq for the device, | |
| * initializes the device,buffers and descriptors, and starts the device. | |
| */ | |
| static int amd8111e_open(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED, | |
| dev->name, dev)) | |
| return -EAGAIN; | |
| napi_enable(&lp->napi); | |
| spin_lock_irq(&lp->lock); | |
| amd8111e_init_hw_default(lp); | |
| if(amd8111e_restart(dev)){ | |
| spin_unlock_irq(&lp->lock); | |
| napi_disable(&lp->napi); | |
| if (dev->irq) | |
| free_irq(dev->irq, dev); | |
| return -ENOMEM; | |
| } | |
| /* Start ipg timer */ | |
| if(lp->options & OPTION_DYN_IPG_ENABLE){ | |
| add_timer(&lp->ipg_data.ipg_timer); | |
| netdev_info(dev, "Dynamic IPG Enabled\n"); | |
| } | |
| lp->opened = 1; | |
| spin_unlock_irq(&lp->lock); | |
| netif_start_queue(dev); | |
| return 0; | |
| } | |
| /* This function checks if there is any transmit descriptors | |
| * available to queue more packet. | |
| */ | |
| static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp) | |
| { | |
| int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK; | |
| if (lp->tx_skbuff[tx_index]) | |
| return -1; | |
| else | |
| return 0; | |
| } | |
| /* This function will queue the transmit packets to the | |
| * descriptors and will trigger the send operation. It also | |
| * initializes the transmit descriptors with buffer physical address, | |
| * byte count, ownership to hardware etc. | |
| */ | |
| static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int tx_index; | |
| unsigned long flags; | |
| spin_lock_irqsave(&lp->lock, flags); | |
| tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK; | |
| lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len); | |
| lp->tx_skbuff[tx_index] = skb; | |
| lp->tx_ring[tx_index].tx_flags = 0; | |
| #if AMD8111E_VLAN_TAG_USED | |
| if (skb_vlan_tag_present(skb)) { | |
| lp->tx_ring[tx_index].tag_ctrl_cmd |= | |
| cpu_to_le16(TCC_VLAN_INSERT); | |
| lp->tx_ring[tx_index].tag_ctrl_info = | |
| cpu_to_le16(skb_vlan_tag_get(skb)); | |
| } | |
| #endif | |
| lp->tx_dma_addr[tx_index] = | |
| pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE); | |
| lp->tx_ring[tx_index].buff_phy_addr = | |
| cpu_to_le32(lp->tx_dma_addr[tx_index]); | |
| /* Set FCS and LTINT bits */ | |
| wmb(); | |
| lp->tx_ring[tx_index].tx_flags |= | |
| cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT); | |
| lp->tx_idx++; | |
| /* Trigger an immediate send poll. */ | |
| writel( VAL1 | TDMD0, lp->mmio + CMD0); | |
| writel( VAL2 | RDMD0,lp->mmio + CMD0); | |
| if(amd8111e_tx_queue_avail(lp) < 0){ | |
| netif_stop_queue(dev); | |
| } | |
| spin_unlock_irqrestore(&lp->lock, flags); | |
| return NETDEV_TX_OK; | |
| } | |
| /* This function returns all the memory mapped registers of the device. */ | |
| static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf) | |
| { | |
| void __iomem *mmio = lp->mmio; | |
| /* Read only necessary registers */ | |
| buf[0] = readl(mmio + XMT_RING_BASE_ADDR0); | |
| buf[1] = readl(mmio + XMT_RING_LEN0); | |
| buf[2] = readl(mmio + RCV_RING_BASE_ADDR0); | |
| buf[3] = readl(mmio + RCV_RING_LEN0); | |
| buf[4] = readl(mmio + CMD0); | |
| buf[5] = readl(mmio + CMD2); | |
| buf[6] = readl(mmio + CMD3); | |
| buf[7] = readl(mmio + CMD7); | |
| buf[8] = readl(mmio + INT0); | |
| buf[9] = readl(mmio + INTEN0); | |
| buf[10] = readl(mmio + LADRF); | |
| buf[11] = readl(mmio + LADRF+4); | |
| buf[12] = readl(mmio + STAT0); | |
| } | |
| /* This function sets promiscuos mode, all-multi mode or the multicast address | |
| * list to the device. | |
| */ | |
| static void amd8111e_set_multicast_list(struct net_device *dev) | |
| { | |
| struct netdev_hw_addr *ha; | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| u32 mc_filter[2] ; | |
| int bit_num; | |
| if(dev->flags & IFF_PROMISC){ | |
| writel( VAL2 | PROM, lp->mmio + CMD2); | |
| return; | |
| } | |
| else | |
| writel( PROM, lp->mmio + CMD2); | |
| if (dev->flags & IFF_ALLMULTI || | |
| netdev_mc_count(dev) > MAX_FILTER_SIZE) { | |
| /* get all multicast packet */ | |
| mc_filter[1] = mc_filter[0] = 0xffffffff; | |
| lp->options |= OPTION_MULTICAST_ENABLE; | |
| amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); | |
| return; | |
| } | |
| if (netdev_mc_empty(dev)) { | |
| /* get only own packets */ | |
| mc_filter[1] = mc_filter[0] = 0; | |
| lp->options &= ~OPTION_MULTICAST_ENABLE; | |
| amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); | |
| /* disable promiscuous mode */ | |
| writel(PROM, lp->mmio + CMD2); | |
| return; | |
| } | |
| /* load all the multicast addresses in the logic filter */ | |
| lp->options |= OPTION_MULTICAST_ENABLE; | |
| mc_filter[1] = mc_filter[0] = 0; | |
| netdev_for_each_mc_addr(ha, dev) { | |
| bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f; | |
| mc_filter[bit_num >> 5] |= 1 << (bit_num & 31); | |
| } | |
| amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF); | |
| /* To eliminate PCI posting bug */ | |
| readl(lp->mmio + CMD2); | |
| } | |
| static void amd8111e_get_drvinfo(struct net_device *dev, | |
| struct ethtool_drvinfo *info) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| struct pci_dev *pci_dev = lp->pci_dev; | |
| strlcpy(info->driver, MODULE_NAME, sizeof(info->driver)); | |
| strlcpy(info->version, MODULE_VERS, sizeof(info->version)); | |
| snprintf(info->fw_version, sizeof(info->fw_version), | |
| "%u", chip_version); | |
| strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info)); | |
| } | |
| static int amd8111e_get_regs_len(struct net_device *dev) | |
| { | |
| return AMD8111E_REG_DUMP_LEN; | |
| } | |
| static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| regs->version = 0; | |
| amd8111e_read_regs(lp, buf); | |
| } | |
| static int amd8111e_get_link_ksettings(struct net_device *dev, | |
| struct ethtool_link_ksettings *cmd) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| spin_lock_irq(&lp->lock); | |
| mii_ethtool_get_link_ksettings(&lp->mii_if, cmd); | |
| spin_unlock_irq(&lp->lock); | |
| return 0; | |
| } | |
| static int amd8111e_set_link_ksettings(struct net_device *dev, | |
| const struct ethtool_link_ksettings *cmd) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int res; | |
| spin_lock_irq(&lp->lock); | |
| res = mii_ethtool_set_link_ksettings(&lp->mii_if, cmd); | |
| spin_unlock_irq(&lp->lock); | |
| return res; | |
| } | |
| static int amd8111e_nway_reset(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| return mii_nway_restart(&lp->mii_if); | |
| } | |
| static u32 amd8111e_get_link(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| return mii_link_ok(&lp->mii_if); | |
| } | |
| static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| wol_info->supported = WAKE_MAGIC|WAKE_PHY; | |
| if (lp->options & OPTION_WOL_ENABLE) | |
| wol_info->wolopts = WAKE_MAGIC; | |
| } | |
| static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY)) | |
| return -EINVAL; | |
| spin_lock_irq(&lp->lock); | |
| if (wol_info->wolopts & WAKE_MAGIC) | |
| lp->options |= | |
| (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE); | |
| else if(wol_info->wolopts & WAKE_PHY) | |
| lp->options |= | |
| (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE); | |
| else | |
| lp->options &= ~OPTION_WOL_ENABLE; | |
| spin_unlock_irq(&lp->lock); | |
| return 0; | |
| } | |
| static const struct ethtool_ops ops = { | |
| .get_drvinfo = amd8111e_get_drvinfo, | |
| .get_regs_len = amd8111e_get_regs_len, | |
| .get_regs = amd8111e_get_regs, | |
| .nway_reset = amd8111e_nway_reset, | |
| .get_link = amd8111e_get_link, | |
| .get_wol = amd8111e_get_wol, | |
| .set_wol = amd8111e_set_wol, | |
| .get_link_ksettings = amd8111e_get_link_ksettings, | |
| .set_link_ksettings = amd8111e_set_link_ksettings, | |
| }; | |
| /* This function handles all the ethtool ioctls. It gives driver info, | |
| * gets/sets driver speed, gets memory mapped register values, forces | |
| * auto negotiation, sets/gets WOL options for ethtool application. | |
| */ | |
| static int amd8111e_ioctl(struct net_device *dev , struct ifreq *ifr, int cmd) | |
| { | |
| struct mii_ioctl_data *data = if_mii(ifr); | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int err; | |
| u32 mii_regval; | |
| switch(cmd) { | |
| case SIOCGMIIPHY: | |
| data->phy_id = lp->ext_phy_addr; | |
| /* fallthru */ | |
| case SIOCGMIIREG: | |
| spin_lock_irq(&lp->lock); | |
| err = amd8111e_read_phy(lp, data->phy_id, | |
| data->reg_num & PHY_REG_ADDR_MASK, &mii_regval); | |
| spin_unlock_irq(&lp->lock); | |
| data->val_out = mii_regval; | |
| return err; | |
| case SIOCSMIIREG: | |
| spin_lock_irq(&lp->lock); | |
| err = amd8111e_write_phy(lp, data->phy_id, | |
| data->reg_num & PHY_REG_ADDR_MASK, data->val_in); | |
| spin_unlock_irq(&lp->lock); | |
| return err; | |
| default: | |
| /* do nothing */ | |
| break; | |
| } | |
| return -EOPNOTSUPP; | |
| } | |
| static int amd8111e_set_mac_address(struct net_device *dev, void *p) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int i; | |
| struct sockaddr *addr = p; | |
| memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); | |
| spin_lock_irq(&lp->lock); | |
| /* Setting the MAC address to the device */ | |
| for (i = 0; i < ETH_ALEN; i++) | |
| writeb( dev->dev_addr[i], lp->mmio + PADR + i ); | |
| spin_unlock_irq(&lp->lock); | |
| return 0; | |
| } | |
| /* This function changes the mtu of the device. It restarts the device to | |
| * initialize the descriptor with new receive buffers. | |
| */ | |
| static int amd8111e_change_mtu(struct net_device *dev, int new_mtu) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int err; | |
| if (!netif_running(dev)) { | |
| /* new_mtu will be used | |
| * when device starts netxt time | |
| */ | |
| dev->mtu = new_mtu; | |
| return 0; | |
| } | |
| spin_lock_irq(&lp->lock); | |
| /* stop the chip */ | |
| writel(RUN, lp->mmio + CMD0); | |
| dev->mtu = new_mtu; | |
| err = amd8111e_restart(dev); | |
| spin_unlock_irq(&lp->lock); | |
| if(!err) | |
| netif_start_queue(dev); | |
| return err; | |
| } | |
| static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp) | |
| { | |
| writel( VAL1|MPPLBA, lp->mmio + CMD3); | |
| writel( VAL0|MPEN_SW, lp->mmio + CMD7); | |
| /* To eliminate PCI posting bug */ | |
| readl(lp->mmio + CMD7); | |
| return 0; | |
| } | |
| static int amd8111e_enable_link_change(struct amd8111e_priv *lp) | |
| { | |
| /* Adapter is already stoped/suspended/interrupt-disabled */ | |
| writel(VAL0|LCMODE_SW,lp->mmio + CMD7); | |
| /* To eliminate PCI posting bug */ | |
| readl(lp->mmio + CMD7); | |
| return 0; | |
| } | |
| /* This function is called when a packet transmission fails to complete | |
| * within a reasonable period, on the assumption that an interrupt have | |
| * failed or the interface is locked up. This function will reinitialize | |
| * the hardware. | |
| */ | |
| static void amd8111e_tx_timeout(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int err; | |
| netdev_err(dev, "transmit timed out, resetting\n"); | |
| spin_lock_irq(&lp->lock); | |
| err = amd8111e_restart(dev); | |
| spin_unlock_irq(&lp->lock); | |
| if(!err) | |
| netif_wake_queue(dev); | |
| } | |
| static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state) | |
| { | |
| struct net_device *dev = pci_get_drvdata(pci_dev); | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| if (!netif_running(dev)) | |
| return 0; | |
| /* disable the interrupt */ | |
| spin_lock_irq(&lp->lock); | |
| amd8111e_disable_interrupt(lp); | |
| spin_unlock_irq(&lp->lock); | |
| netif_device_detach(dev); | |
| /* stop chip */ | |
| spin_lock_irq(&lp->lock); | |
| if(lp->options & OPTION_DYN_IPG_ENABLE) | |
| del_timer_sync(&lp->ipg_data.ipg_timer); | |
| amd8111e_stop_chip(lp); | |
| spin_unlock_irq(&lp->lock); | |
| if(lp->options & OPTION_WOL_ENABLE){ | |
| /* enable wol */ | |
| if(lp->options & OPTION_WAKE_MAGIC_ENABLE) | |
| amd8111e_enable_magicpkt(lp); | |
| if(lp->options & OPTION_WAKE_PHY_ENABLE) | |
| amd8111e_enable_link_change(lp); | |
| pci_enable_wake(pci_dev, PCI_D3hot, 1); | |
| pci_enable_wake(pci_dev, PCI_D3cold, 1); | |
| } | |
| else{ | |
| pci_enable_wake(pci_dev, PCI_D3hot, 0); | |
| pci_enable_wake(pci_dev, PCI_D3cold, 0); | |
| } | |
| pci_save_state(pci_dev); | |
| pci_set_power_state(pci_dev, PCI_D3hot); | |
| return 0; | |
| } | |
| static int amd8111e_resume(struct pci_dev *pci_dev) | |
| { | |
| struct net_device *dev = pci_get_drvdata(pci_dev); | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| if (!netif_running(dev)) | |
| return 0; | |
| pci_set_power_state(pci_dev, PCI_D0); | |
| pci_restore_state(pci_dev); | |
| pci_enable_wake(pci_dev, PCI_D3hot, 0); | |
| pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */ | |
| netif_device_attach(dev); | |
| spin_lock_irq(&lp->lock); | |
| amd8111e_restart(dev); | |
| /* Restart ipg timer */ | |
| if(lp->options & OPTION_DYN_IPG_ENABLE) | |
| mod_timer(&lp->ipg_data.ipg_timer, | |
| jiffies + IPG_CONVERGE_JIFFIES); | |
| spin_unlock_irq(&lp->lock); | |
| return 0; | |
| } | |
| static void amd8111e_config_ipg(struct timer_list *t) | |
| { | |
| struct amd8111e_priv *lp = from_timer(lp, t, ipg_data.ipg_timer); | |
| struct ipg_info *ipg_data = &lp->ipg_data; | |
| void __iomem *mmio = lp->mmio; | |
| unsigned int prev_col_cnt = ipg_data->col_cnt; | |
| unsigned int total_col_cnt; | |
| unsigned int tmp_ipg; | |
| if(lp->link_config.duplex == DUPLEX_FULL){ | |
| ipg_data->ipg = DEFAULT_IPG; | |
| return; | |
| } | |
| if(ipg_data->ipg_state == SSTATE){ | |
| if(ipg_data->timer_tick == IPG_STABLE_TIME){ | |
| ipg_data->timer_tick = 0; | |
| ipg_data->ipg = MIN_IPG - IPG_STEP; | |
| ipg_data->current_ipg = MIN_IPG; | |
| ipg_data->diff_col_cnt = 0xFFFFFFFF; | |
| ipg_data->ipg_state = CSTATE; | |
| } | |
| else | |
| ipg_data->timer_tick++; | |
| } | |
| if(ipg_data->ipg_state == CSTATE){ | |
| /* Get the current collision count */ | |
| total_col_cnt = ipg_data->col_cnt = | |
| amd8111e_read_mib(mmio, xmt_collisions); | |
| if ((total_col_cnt - prev_col_cnt) < | |
| (ipg_data->diff_col_cnt)){ | |
| ipg_data->diff_col_cnt = | |
| total_col_cnt - prev_col_cnt ; | |
| ipg_data->ipg = ipg_data->current_ipg; | |
| } | |
| ipg_data->current_ipg += IPG_STEP; | |
| if (ipg_data->current_ipg <= MAX_IPG) | |
| tmp_ipg = ipg_data->current_ipg; | |
| else{ | |
| tmp_ipg = ipg_data->ipg; | |
| ipg_data->ipg_state = SSTATE; | |
| } | |
| writew((u32)tmp_ipg, mmio + IPG); | |
| writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1); | |
| } | |
| mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES); | |
| return; | |
| } | |
| static void amd8111e_probe_ext_phy(struct net_device *dev) | |
| { | |
| struct amd8111e_priv *lp = netdev_priv(dev); | |
| int i; | |
| for (i = 0x1e; i >= 0; i--) { | |
| u32 id1, id2; | |
| if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1)) | |
| continue; | |
| if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2)) | |
| continue; | |
| lp->ext_phy_id = (id1 << 16) | id2; | |
| lp->ext_phy_addr = i; | |
| return; | |
| } | |
| lp->ext_phy_id = 0; | |
| lp->ext_phy_addr = 1; | |
| } | |
| static const struct net_device_ops amd8111e_netdev_ops = { | |
| .ndo_open = amd8111e_open, | |
| .ndo_stop = amd8111e_close, | |
| .ndo_start_xmit = amd8111e_start_xmit, | |
| .ndo_tx_timeout = amd8111e_tx_timeout, | |
| .ndo_get_stats = amd8111e_get_stats, | |
| .ndo_set_rx_mode = amd8111e_set_multicast_list, | |
| .ndo_validate_addr = eth_validate_addr, | |
| .ndo_set_mac_address = amd8111e_set_mac_address, | |
| .ndo_do_ioctl = amd8111e_ioctl, | |
| .ndo_change_mtu = amd8111e_change_mtu, | |
| #ifdef CONFIG_NET_POLL_CONTROLLER | |
| .ndo_poll_controller = amd8111e_poll, | |
| #endif | |
| }; | |
| static int amd8111e_probe_one(struct pci_dev *pdev, | |
| const struct pci_device_id *ent) | |
| { | |
| int err, i; | |
| unsigned long reg_addr,reg_len; | |
| struct amd8111e_priv *lp; | |
| struct net_device *dev; | |
| err = pci_enable_device(pdev); | |
| if(err){ | |
| dev_err(&pdev->dev, "Cannot enable new PCI device\n"); | |
| return err; | |
| } | |
| if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){ | |
| dev_err(&pdev->dev, "Cannot find PCI base address\n"); | |
| err = -ENODEV; | |
| goto err_disable_pdev; | |
| } | |
| err = pci_request_regions(pdev, MODULE_NAME); | |
| if(err){ | |
| dev_err(&pdev->dev, "Cannot obtain PCI resources\n"); | |
| goto err_disable_pdev; | |
| } | |
| pci_set_master(pdev); | |
| /* Find power-management capability. */ | |
| if (!pdev->pm_cap) { | |
| dev_err(&pdev->dev, "No Power Management capability\n"); | |
| err = -ENODEV; | |
| goto err_free_reg; | |
| } | |
| /* Initialize DMA */ | |
| if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) { | |
| dev_err(&pdev->dev, "DMA not supported\n"); | |
| err = -ENODEV; | |
| goto err_free_reg; | |
| } | |
| reg_addr = pci_resource_start(pdev, 0); | |
| reg_len = pci_resource_len(pdev, 0); | |
| dev = alloc_etherdev(sizeof(struct amd8111e_priv)); | |
| if (!dev) { | |
| err = -ENOMEM; | |
| goto err_free_reg; | |
| } | |
| SET_NETDEV_DEV(dev, &pdev->dev); | |
| #if AMD8111E_VLAN_TAG_USED | |
| dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX ; | |
| #endif | |
| lp = netdev_priv(dev); | |
| lp->pci_dev = pdev; | |
| lp->amd8111e_net_dev = dev; | |
| lp->pm_cap = pdev->pm_cap; | |
| spin_lock_init(&lp->lock); | |
| lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len); | |
| if (!lp->mmio) { | |
| dev_err(&pdev->dev, "Cannot map device registers\n"); | |
| err = -ENOMEM; | |
| goto err_free_dev; | |
| } | |
| /* Initializing MAC address */ | |
| for (i = 0; i < ETH_ALEN; i++) | |
| dev->dev_addr[i] = readb(lp->mmio + PADR + i); | |
| /* Setting user defined parametrs */ | |
| lp->ext_phy_option = speed_duplex[card_idx]; | |
| if(coalesce[card_idx]) | |
| lp->options |= OPTION_INTR_COAL_ENABLE; | |
| if(dynamic_ipg[card_idx++]) | |
| lp->options |= OPTION_DYN_IPG_ENABLE; | |
| /* Initialize driver entry points */ | |
| dev->netdev_ops = &amd8111e_netdev_ops; | |
| dev->ethtool_ops = &ops; | |
| dev->irq =pdev->irq; | |
| dev->watchdog_timeo = AMD8111E_TX_TIMEOUT; | |
| dev->min_mtu = AMD8111E_MIN_MTU; | |
| dev->max_mtu = AMD8111E_MAX_MTU; | |
| netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32); | |
| #if AMD8111E_VLAN_TAG_USED | |
| dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX; | |
| #endif | |
| /* Probe the external PHY */ | |
| amd8111e_probe_ext_phy(dev); | |
| /* setting mii default values */ | |
| lp->mii_if.dev = dev; | |
| lp->mii_if.mdio_read = amd8111e_mdio_read; | |
| lp->mii_if.mdio_write = amd8111e_mdio_write; | |
| lp->mii_if.phy_id = lp->ext_phy_addr; | |
| /* Set receive buffer length and set jumbo option*/ | |
| amd8111e_set_rx_buff_len(dev); | |
| err = register_netdev(dev); | |
| if (err) { | |
| dev_err(&pdev->dev, "Cannot register net device\n"); | |
| goto err_free_dev; | |
| } | |
| pci_set_drvdata(pdev, dev); | |
| /* Initialize software ipg timer */ | |
| if(lp->options & OPTION_DYN_IPG_ENABLE){ | |
| timer_setup(&lp->ipg_data.ipg_timer, amd8111e_config_ipg, 0); | |
| lp->ipg_data.ipg_timer.expires = jiffies + | |
| IPG_CONVERGE_JIFFIES; | |
| lp->ipg_data.ipg = DEFAULT_IPG; | |
| lp->ipg_data.ipg_state = CSTATE; | |
| } | |
| /* display driver and device information */ | |
| chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28; | |
| dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS); | |
| dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n", | |
| chip_version, dev->dev_addr); | |
| if (lp->ext_phy_id) | |
| dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n", | |
| lp->ext_phy_id, lp->ext_phy_addr); | |
| else | |
| dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n"); | |
| return 0; | |
| err_free_dev: | |
| free_netdev(dev); | |
| err_free_reg: | |
| pci_release_regions(pdev); | |
| err_disable_pdev: | |
| pci_disable_device(pdev); | |
| return err; | |
| } | |
| static void amd8111e_remove_one(struct pci_dev *pdev) | |
| { | |
| struct net_device *dev = pci_get_drvdata(pdev); | |
| if (dev) { | |
| unregister_netdev(dev); | |
| free_netdev(dev); | |
| pci_release_regions(pdev); | |
| pci_disable_device(pdev); | |
| } | |
| } | |
| static const struct pci_device_id amd8111e_pci_tbl[] = { | |
| { | |
| .vendor = PCI_VENDOR_ID_AMD, | |
| .device = PCI_DEVICE_ID_AMD8111E_7462, | |
| }, | |
| { | |
| .vendor = 0, | |
| } | |
| }; | |
| MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl); | |
| static struct pci_driver amd8111e_driver = { | |
| .name = MODULE_NAME, | |
| .id_table = amd8111e_pci_tbl, | |
| .probe = amd8111e_probe_one, | |
| .remove = amd8111e_remove_one, | |
| .suspend = amd8111e_suspend, | |
| .resume = amd8111e_resume | |
| }; | |
| module_pci_driver(amd8111e_driver); |