| /* | |
| * Copyright (C) Ericsson AB 2007-2008 | |
| * Copyright (C) ST-Ericsson SA 2008-2010 | |
| * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson | |
| * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson | |
| * License terms: GNU General Public License (GPL) version 2 | |
| */ | |
| #include <linux/dma-mapping.h> | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/export.h> | |
| #include <linux/dmaengine.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/log2.h> | |
| #include <linux/pm.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/err.h> | |
| #include <linux/of.h> | |
| #include <linux/of_dma.h> | |
| #include <linux/amba/bus.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/platform_data/dma-ste-dma40.h> | |
| #include "dmaengine.h" | |
| #include "ste_dma40_ll.h" | |
| #define D40_NAME "dma40" | |
| #define D40_PHY_CHAN -1 | |
| /* For masking out/in 2 bit channel positions */ | |
| #define D40_CHAN_POS(chan) (2 * (chan / 2)) | |
| #define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan)) | |
| /* Maximum iterations taken before giving up suspending a channel */ | |
| #define D40_SUSPEND_MAX_IT 500 | |
| /* Milliseconds */ | |
| #define DMA40_AUTOSUSPEND_DELAY 100 | |
| /* Hardware requirement on LCLA alignment */ | |
| #define LCLA_ALIGNMENT 0x40000 | |
| /* Max number of links per event group */ | |
| #define D40_LCLA_LINK_PER_EVENT_GRP 128 | |
| #define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP | |
| /* Max number of logical channels per physical channel */ | |
| #define D40_MAX_LOG_CHAN_PER_PHY 32 | |
| /* Attempts before giving up to trying to get pages that are aligned */ | |
| #define MAX_LCLA_ALLOC_ATTEMPTS 256 | |
| /* Bit markings for allocation map */ | |
| #define D40_ALLOC_FREE BIT(31) | |
| #define D40_ALLOC_PHY BIT(30) | |
| #define D40_ALLOC_LOG_FREE 0 | |
| #define D40_MEMCPY_MAX_CHANS 8 | |
| /* Reserved event lines for memcpy only. */ | |
| #define DB8500_DMA_MEMCPY_EV_0 51 | |
| #define DB8500_DMA_MEMCPY_EV_1 56 | |
| #define DB8500_DMA_MEMCPY_EV_2 57 | |
| #define DB8500_DMA_MEMCPY_EV_3 58 | |
| #define DB8500_DMA_MEMCPY_EV_4 59 | |
| #define DB8500_DMA_MEMCPY_EV_5 60 | |
| static int dma40_memcpy_channels[] = { | |
| DB8500_DMA_MEMCPY_EV_0, | |
| DB8500_DMA_MEMCPY_EV_1, | |
| DB8500_DMA_MEMCPY_EV_2, | |
| DB8500_DMA_MEMCPY_EV_3, | |
| DB8500_DMA_MEMCPY_EV_4, | |
| DB8500_DMA_MEMCPY_EV_5, | |
| }; | |
| /* Default configuration for physcial memcpy */ | |
| static const struct stedma40_chan_cfg dma40_memcpy_conf_phy = { | |
| .mode = STEDMA40_MODE_PHYSICAL, | |
| .dir = DMA_MEM_TO_MEM, | |
| .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, | |
| .src_info.psize = STEDMA40_PSIZE_PHY_1, | |
| .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, | |
| .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, | |
| .dst_info.psize = STEDMA40_PSIZE_PHY_1, | |
| .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, | |
| }; | |
| /* Default configuration for logical memcpy */ | |
| static const struct stedma40_chan_cfg dma40_memcpy_conf_log = { | |
| .mode = STEDMA40_MODE_LOGICAL, | |
| .dir = DMA_MEM_TO_MEM, | |
| .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, | |
| .src_info.psize = STEDMA40_PSIZE_LOG_1, | |
| .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, | |
| .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE, | |
| .dst_info.psize = STEDMA40_PSIZE_LOG_1, | |
| .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL, | |
| }; | |
| /** | |
| * enum 40_command - The different commands and/or statuses. | |
| * | |
| * @D40_DMA_STOP: DMA channel command STOP or status STOPPED, | |
| * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN. | |
| * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible. | |
| * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED. | |
| */ | |
| enum d40_command { | |
| D40_DMA_STOP = 0, | |
| D40_DMA_RUN = 1, | |
| D40_DMA_SUSPEND_REQ = 2, | |
| D40_DMA_SUSPENDED = 3 | |
| }; | |
| /* | |
| * enum d40_events - The different Event Enables for the event lines. | |
| * | |
| * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan. | |
| * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan. | |
| * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line. | |
| * @D40_ROUND_EVENTLINE: Status check for event line. | |
| */ | |
| enum d40_events { | |
| D40_DEACTIVATE_EVENTLINE = 0, | |
| D40_ACTIVATE_EVENTLINE = 1, | |
| D40_SUSPEND_REQ_EVENTLINE = 2, | |
| D40_ROUND_EVENTLINE = 3 | |
| }; | |
| /* | |
| * These are the registers that has to be saved and later restored | |
| * when the DMA hw is powered off. | |
| * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works. | |
| */ | |
| static u32 d40_backup_regs[] = { | |
| D40_DREG_LCPA, | |
| D40_DREG_LCLA, | |
| D40_DREG_PRMSE, | |
| D40_DREG_PRMSO, | |
| D40_DREG_PRMOE, | |
| D40_DREG_PRMOO, | |
| }; | |
| #define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs) | |
| /* | |
| * since 9540 and 8540 has the same HW revision | |
| * use v4a for 9540 or ealier | |
| * use v4b for 8540 or later | |
| * HW revision: | |
| * DB8500ed has revision 0 | |
| * DB8500v1 has revision 2 | |
| * DB8500v2 has revision 3 | |
| * AP9540v1 has revision 4 | |
| * DB8540v1 has revision 4 | |
| * TODO: Check if all these registers have to be saved/restored on dma40 v4a | |
| */ | |
| static u32 d40_backup_regs_v4a[] = { | |
| D40_DREG_PSEG1, | |
| D40_DREG_PSEG2, | |
| D40_DREG_PSEG3, | |
| D40_DREG_PSEG4, | |
| D40_DREG_PCEG1, | |
| D40_DREG_PCEG2, | |
| D40_DREG_PCEG3, | |
| D40_DREG_PCEG4, | |
| D40_DREG_RSEG1, | |
| D40_DREG_RSEG2, | |
| D40_DREG_RSEG3, | |
| D40_DREG_RSEG4, | |
| D40_DREG_RCEG1, | |
| D40_DREG_RCEG2, | |
| D40_DREG_RCEG3, | |
| D40_DREG_RCEG4, | |
| }; | |
| #define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a) | |
| static u32 d40_backup_regs_v4b[] = { | |
| D40_DREG_CPSEG1, | |
| D40_DREG_CPSEG2, | |
| D40_DREG_CPSEG3, | |
| D40_DREG_CPSEG4, | |
| D40_DREG_CPSEG5, | |
| D40_DREG_CPCEG1, | |
| D40_DREG_CPCEG2, | |
| D40_DREG_CPCEG3, | |
| D40_DREG_CPCEG4, | |
| D40_DREG_CPCEG5, | |
| D40_DREG_CRSEG1, | |
| D40_DREG_CRSEG2, | |
| D40_DREG_CRSEG3, | |
| D40_DREG_CRSEG4, | |
| D40_DREG_CRSEG5, | |
| D40_DREG_CRCEG1, | |
| D40_DREG_CRCEG2, | |
| D40_DREG_CRCEG3, | |
| D40_DREG_CRCEG4, | |
| D40_DREG_CRCEG5, | |
| }; | |
| #define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b) | |
| static u32 d40_backup_regs_chan[] = { | |
| D40_CHAN_REG_SSCFG, | |
| D40_CHAN_REG_SSELT, | |
| D40_CHAN_REG_SSPTR, | |
| D40_CHAN_REG_SSLNK, | |
| D40_CHAN_REG_SDCFG, | |
| D40_CHAN_REG_SDELT, | |
| D40_CHAN_REG_SDPTR, | |
| D40_CHAN_REG_SDLNK, | |
| }; | |
| #define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \ | |
| BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B) | |
| /** | |
| * struct d40_interrupt_lookup - lookup table for interrupt handler | |
| * | |
| * @src: Interrupt mask register. | |
| * @clr: Interrupt clear register. | |
| * @is_error: true if this is an error interrupt. | |
| * @offset: start delta in the lookup_log_chans in d40_base. If equals to | |
| * D40_PHY_CHAN, the lookup_phy_chans shall be used instead. | |
| */ | |
| struct d40_interrupt_lookup { | |
| u32 src; | |
| u32 clr; | |
| bool is_error; | |
| int offset; | |
| }; | |
| static struct d40_interrupt_lookup il_v4a[] = { | |
| {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0}, | |
| {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32}, | |
| {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64}, | |
| {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96}, | |
| {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0}, | |
| {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32}, | |
| {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64}, | |
| {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96}, | |
| {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN}, | |
| {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN}, | |
| }; | |
| static struct d40_interrupt_lookup il_v4b[] = { | |
| {D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false, 0}, | |
| {D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32}, | |
| {D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64}, | |
| {D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96}, | |
| {D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128}, | |
| {D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true, 0}, | |
| {D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true, 32}, | |
| {D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true, 64}, | |
| {D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true, 96}, | |
| {D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true, 128}, | |
| {D40_DREG_CPCTIS, D40_DREG_CPCICR, false, D40_PHY_CHAN}, | |
| {D40_DREG_CPCEIS, D40_DREG_CPCICR, true, D40_PHY_CHAN}, | |
| }; | |
| /** | |
| * struct d40_reg_val - simple lookup struct | |
| * | |
| * @reg: The register. | |
| * @val: The value that belongs to the register in reg. | |
| */ | |
| struct d40_reg_val { | |
| unsigned int reg; | |
| unsigned int val; | |
| }; | |
| static __initdata struct d40_reg_val dma_init_reg_v4a[] = { | |
| /* Clock every part of the DMA block from start */ | |
| { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL}, | |
| /* Interrupts on all logical channels */ | |
| { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF} | |
| }; | |
| static __initdata struct d40_reg_val dma_init_reg_v4b[] = { | |
| /* Clock every part of the DMA block from start */ | |
| { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL}, | |
| /* Interrupts on all logical channels */ | |
| { .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF}, | |
| { .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF} | |
| }; | |
| /** | |
| * struct d40_lli_pool - Structure for keeping LLIs in memory | |
| * | |
| * @base: Pointer to memory area when the pre_alloc_lli's are not large | |
| * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if | |
| * pre_alloc_lli is used. | |
| * @dma_addr: DMA address, if mapped | |
| * @size: The size in bytes of the memory at base or the size of pre_alloc_lli. | |
| * @pre_alloc_lli: Pre allocated area for the most common case of transfers, | |
| * one buffer to one buffer. | |
| */ | |
| struct d40_lli_pool { | |
| void *base; | |
| int size; | |
| dma_addr_t dma_addr; | |
| /* Space for dst and src, plus an extra for padding */ | |
| u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)]; | |
| }; | |
| /** | |
| * struct d40_desc - A descriptor is one DMA job. | |
| * | |
| * @lli_phy: LLI settings for physical channel. Both src and dst= | |
| * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if | |
| * lli_len equals one. | |
| * @lli_log: Same as above but for logical channels. | |
| * @lli_pool: The pool with two entries pre-allocated. | |
| * @lli_len: Number of llis of current descriptor. | |
| * @lli_current: Number of transferred llis. | |
| * @lcla_alloc: Number of LCLA entries allocated. | |
| * @txd: DMA engine struct. Used for among other things for communication | |
| * during a transfer. | |
| * @node: List entry. | |
| * @is_in_client_list: true if the client owns this descriptor. | |
| * @cyclic: true if this is a cyclic job | |
| * | |
| * This descriptor is used for both logical and physical transfers. | |
| */ | |
| struct d40_desc { | |
| /* LLI physical */ | |
| struct d40_phy_lli_bidir lli_phy; | |
| /* LLI logical */ | |
| struct d40_log_lli_bidir lli_log; | |
| struct d40_lli_pool lli_pool; | |
| int lli_len; | |
| int lli_current; | |
| int lcla_alloc; | |
| struct dma_async_tx_descriptor txd; | |
| struct list_head node; | |
| bool is_in_client_list; | |
| bool cyclic; | |
| }; | |
| /** | |
| * struct d40_lcla_pool - LCLA pool settings and data. | |
| * | |
| * @base: The virtual address of LCLA. 18 bit aligned. | |
| * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used. | |
| * This pointer is only there for clean-up on error. | |
| * @pages: The number of pages needed for all physical channels. | |
| * Only used later for clean-up on error | |
| * @lock: Lock to protect the content in this struct. | |
| * @alloc_map: big map over which LCLA entry is own by which job. | |
| */ | |
| struct d40_lcla_pool { | |
| void *base; | |
| dma_addr_t dma_addr; | |
| void *base_unaligned; | |
| int pages; | |
| spinlock_t lock; | |
| struct d40_desc **alloc_map; | |
| }; | |
| /** | |
| * struct d40_phy_res - struct for handling eventlines mapped to physical | |
| * channels. | |
| * | |
| * @lock: A lock protection this entity. | |
| * @reserved: True if used by secure world or otherwise. | |
| * @num: The physical channel number of this entity. | |
| * @allocated_src: Bit mapped to show which src event line's are mapped to | |
| * this physical channel. Can also be free or physically allocated. | |
| * @allocated_dst: Same as for src but is dst. | |
| * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as | |
| * event line number. | |
| * @use_soft_lli: To mark if the linked lists of channel are managed by SW. | |
| */ | |
| struct d40_phy_res { | |
| spinlock_t lock; | |
| bool reserved; | |
| int num; | |
| u32 allocated_src; | |
| u32 allocated_dst; | |
| bool use_soft_lli; | |
| }; | |
| struct d40_base; | |
| /** | |
| * struct d40_chan - Struct that describes a channel. | |
| * | |
| * @lock: A spinlock to protect this struct. | |
| * @log_num: The logical number, if any of this channel. | |
| * @pending_tx: The number of pending transfers. Used between interrupt handler | |
| * and tasklet. | |
| * @busy: Set to true when transfer is ongoing on this channel. | |
| * @phy_chan: Pointer to physical channel which this instance runs on. If this | |
| * point is NULL, then the channel is not allocated. | |
| * @chan: DMA engine handle. | |
| * @tasklet: Tasklet that gets scheduled from interrupt context to complete a | |
| * transfer and call client callback. | |
| * @client: Cliented owned descriptor list. | |
| * @pending_queue: Submitted jobs, to be issued by issue_pending() | |
| * @active: Active descriptor. | |
| * @done: Completed jobs | |
| * @queue: Queued jobs. | |
| * @prepare_queue: Prepared jobs. | |
| * @dma_cfg: The client configuration of this dma channel. | |
| * @configured: whether the dma_cfg configuration is valid | |
| * @base: Pointer to the device instance struct. | |
| * @src_def_cfg: Default cfg register setting for src. | |
| * @dst_def_cfg: Default cfg register setting for dst. | |
| * @log_def: Default logical channel settings. | |
| * @lcpa: Pointer to dst and src lcpa settings. | |
| * @runtime_addr: runtime configured address. | |
| * @runtime_direction: runtime configured direction. | |
| * | |
| * This struct can either "be" a logical or a physical channel. | |
| */ | |
| struct d40_chan { | |
| spinlock_t lock; | |
| int log_num; | |
| int pending_tx; | |
| bool busy; | |
| struct d40_phy_res *phy_chan; | |
| struct dma_chan chan; | |
| struct tasklet_struct tasklet; | |
| struct list_head client; | |
| struct list_head pending_queue; | |
| struct list_head active; | |
| struct list_head done; | |
| struct list_head queue; | |
| struct list_head prepare_queue; | |
| struct stedma40_chan_cfg dma_cfg; | |
| bool configured; | |
| struct d40_base *base; | |
| /* Default register configurations */ | |
| u32 src_def_cfg; | |
| u32 dst_def_cfg; | |
| struct d40_def_lcsp log_def; | |
| struct d40_log_lli_full *lcpa; | |
| /* Runtime reconfiguration */ | |
| dma_addr_t runtime_addr; | |
| enum dma_transfer_direction runtime_direction; | |
| }; | |
| /** | |
| * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA | |
| * controller | |
| * | |
| * @backup: the pointer to the registers address array for backup | |
| * @backup_size: the size of the registers address array for backup | |
| * @realtime_en: the realtime enable register | |
| * @realtime_clear: the realtime clear register | |
| * @high_prio_en: the high priority enable register | |
| * @high_prio_clear: the high priority clear register | |
| * @interrupt_en: the interrupt enable register | |
| * @interrupt_clear: the interrupt clear register | |
| * @il: the pointer to struct d40_interrupt_lookup | |
| * @il_size: the size of d40_interrupt_lookup array | |
| * @init_reg: the pointer to the struct d40_reg_val | |
| * @init_reg_size: the size of d40_reg_val array | |
| */ | |
| struct d40_gen_dmac { | |
| u32 *backup; | |
| u32 backup_size; | |
| u32 realtime_en; | |
| u32 realtime_clear; | |
| u32 high_prio_en; | |
| u32 high_prio_clear; | |
| u32 interrupt_en; | |
| u32 interrupt_clear; | |
| struct d40_interrupt_lookup *il; | |
| u32 il_size; | |
| struct d40_reg_val *init_reg; | |
| u32 init_reg_size; | |
| }; | |
| /** | |
| * struct d40_base - The big global struct, one for each probe'd instance. | |
| * | |
| * @interrupt_lock: Lock used to make sure one interrupt is handle a time. | |
| * @execmd_lock: Lock for execute command usage since several channels share | |
| * the same physical register. | |
| * @dev: The device structure. | |
| * @virtbase: The virtual base address of the DMA's register. | |
| * @rev: silicon revision detected. | |
| * @clk: Pointer to the DMA clock structure. | |
| * @phy_start: Physical memory start of the DMA registers. | |
| * @phy_size: Size of the DMA register map. | |
| * @irq: The IRQ number. | |
| * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem | |
| * transfers). | |
| * @num_phy_chans: The number of physical channels. Read from HW. This | |
| * is the number of available channels for this driver, not counting "Secure | |
| * mode" allocated physical channels. | |
| * @num_log_chans: The number of logical channels. Calculated from | |
| * num_phy_chans. | |
| * @dma_both: dma_device channels that can do both memcpy and slave transfers. | |
| * @dma_slave: dma_device channels that can do only do slave transfers. | |
| * @dma_memcpy: dma_device channels that can do only do memcpy transfers. | |
| * @phy_chans: Room for all possible physical channels in system. | |
| * @log_chans: Room for all possible logical channels in system. | |
| * @lookup_log_chans: Used to map interrupt number to logical channel. Points | |
| * to log_chans entries. | |
| * @lookup_phy_chans: Used to map interrupt number to physical channel. Points | |
| * to phy_chans entries. | |
| * @plat_data: Pointer to provided platform_data which is the driver | |
| * configuration. | |
| * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla. | |
| * @phy_res: Vector containing all physical channels. | |
| * @lcla_pool: lcla pool settings and data. | |
| * @lcpa_base: The virtual mapped address of LCPA. | |
| * @phy_lcpa: The physical address of the LCPA. | |
| * @lcpa_size: The size of the LCPA area. | |
| * @desc_slab: cache for descriptors. | |
| * @reg_val_backup: Here the values of some hardware registers are stored | |
| * before the DMA is powered off. They are restored when the power is back on. | |
| * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and | |
| * later | |
| * @reg_val_backup_chan: Backup data for standard channel parameter registers. | |
| * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off. | |
| * @gen_dmac: the struct for generic registers values to represent u8500/8540 | |
| * DMA controller | |
| */ | |
| struct d40_base { | |
| spinlock_t interrupt_lock; | |
| spinlock_t execmd_lock; | |
| struct device *dev; | |
| void __iomem *virtbase; | |
| u8 rev:4; | |
| struct clk *clk; | |
| phys_addr_t phy_start; | |
| resource_size_t phy_size; | |
| int irq; | |
| int num_memcpy_chans; | |
| int num_phy_chans; | |
| int num_log_chans; | |
| struct device_dma_parameters dma_parms; | |
| struct dma_device dma_both; | |
| struct dma_device dma_slave; | |
| struct dma_device dma_memcpy; | |
| struct d40_chan *phy_chans; | |
| struct d40_chan *log_chans; | |
| struct d40_chan **lookup_log_chans; | |
| struct d40_chan **lookup_phy_chans; | |
| struct stedma40_platform_data *plat_data; | |
| struct regulator *lcpa_regulator; | |
| /* Physical half channels */ | |
| struct d40_phy_res *phy_res; | |
| struct d40_lcla_pool lcla_pool; | |
| void *lcpa_base; | |
| dma_addr_t phy_lcpa; | |
| resource_size_t lcpa_size; | |
| struct kmem_cache *desc_slab; | |
| u32 reg_val_backup[BACKUP_REGS_SZ]; | |
| u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX]; | |
| u32 *reg_val_backup_chan; | |
| u16 gcc_pwr_off_mask; | |
| struct d40_gen_dmac gen_dmac; | |
| }; | |
| static struct device *chan2dev(struct d40_chan *d40c) | |
| { | |
| return &d40c->chan.dev->device; | |
| } | |
| static bool chan_is_physical(struct d40_chan *chan) | |
| { | |
| return chan->log_num == D40_PHY_CHAN; | |
| } | |
| static bool chan_is_logical(struct d40_chan *chan) | |
| { | |
| return !chan_is_physical(chan); | |
| } | |
| static void __iomem *chan_base(struct d40_chan *chan) | |
| { | |
| return chan->base->virtbase + D40_DREG_PCBASE + | |
| chan->phy_chan->num * D40_DREG_PCDELTA; | |
| } | |
| #define d40_err(dev, format, arg...) \ | |
| dev_err(dev, "[%s] " format, __func__, ## arg) | |
| #define chan_err(d40c, format, arg...) \ | |
| d40_err(chan2dev(d40c), format, ## arg) | |
| static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d, | |
| int lli_len) | |
| { | |
| bool is_log = chan_is_logical(d40c); | |
| u32 align; | |
| void *base; | |
| if (is_log) | |
| align = sizeof(struct d40_log_lli); | |
| else | |
| align = sizeof(struct d40_phy_lli); | |
| if (lli_len == 1) { | |
| base = d40d->lli_pool.pre_alloc_lli; | |
| d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli); | |
| d40d->lli_pool.base = NULL; | |
| } else { | |
| d40d->lli_pool.size = lli_len * 2 * align; | |
| base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT); | |
| d40d->lli_pool.base = base; | |
| if (d40d->lli_pool.base == NULL) | |
| return -ENOMEM; | |
| } | |
| if (is_log) { | |
| d40d->lli_log.src = PTR_ALIGN(base, align); | |
| d40d->lli_log.dst = d40d->lli_log.src + lli_len; | |
| d40d->lli_pool.dma_addr = 0; | |
| } else { | |
| d40d->lli_phy.src = PTR_ALIGN(base, align); | |
| d40d->lli_phy.dst = d40d->lli_phy.src + lli_len; | |
| d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev, | |
| d40d->lli_phy.src, | |
| d40d->lli_pool.size, | |
| DMA_TO_DEVICE); | |
| if (dma_mapping_error(d40c->base->dev, | |
| d40d->lli_pool.dma_addr)) { | |
| kfree(d40d->lli_pool.base); | |
| d40d->lli_pool.base = NULL; | |
| d40d->lli_pool.dma_addr = 0; | |
| return -ENOMEM; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d) | |
| { | |
| if (d40d->lli_pool.dma_addr) | |
| dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr, | |
| d40d->lli_pool.size, DMA_TO_DEVICE); | |
| kfree(d40d->lli_pool.base); | |
| d40d->lli_pool.base = NULL; | |
| d40d->lli_pool.size = 0; | |
| d40d->lli_log.src = NULL; | |
| d40d->lli_log.dst = NULL; | |
| d40d->lli_phy.src = NULL; | |
| d40d->lli_phy.dst = NULL; | |
| } | |
| static int d40_lcla_alloc_one(struct d40_chan *d40c, | |
| struct d40_desc *d40d) | |
| { | |
| unsigned long flags; | |
| int i; | |
| int ret = -EINVAL; | |
| spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); | |
| /* | |
| * Allocate both src and dst at the same time, therefore the half | |
| * start on 1 since 0 can't be used since zero is used as end marker. | |
| */ | |
| for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) { | |
| int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i; | |
| if (!d40c->base->lcla_pool.alloc_map[idx]) { | |
| d40c->base->lcla_pool.alloc_map[idx] = d40d; | |
| d40d->lcla_alloc++; | |
| ret = i; | |
| break; | |
| } | |
| } | |
| spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); | |
| return ret; | |
| } | |
| static int d40_lcla_free_all(struct d40_chan *d40c, | |
| struct d40_desc *d40d) | |
| { | |
| unsigned long flags; | |
| int i; | |
| int ret = -EINVAL; | |
| if (chan_is_physical(d40c)) | |
| return 0; | |
| spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags); | |
| for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) { | |
| int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i; | |
| if (d40c->base->lcla_pool.alloc_map[idx] == d40d) { | |
| d40c->base->lcla_pool.alloc_map[idx] = NULL; | |
| d40d->lcla_alloc--; | |
| if (d40d->lcla_alloc == 0) { | |
| ret = 0; | |
| break; | |
| } | |
| } | |
| } | |
| spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags); | |
| return ret; | |
| } | |
| static void d40_desc_remove(struct d40_desc *d40d) | |
| { | |
| list_del(&d40d->node); | |
| } | |
| static struct d40_desc *d40_desc_get(struct d40_chan *d40c) | |
| { | |
| struct d40_desc *desc = NULL; | |
| if (!list_empty(&d40c->client)) { | |
| struct d40_desc *d; | |
| struct d40_desc *_d; | |
| list_for_each_entry_safe(d, _d, &d40c->client, node) { | |
| if (async_tx_test_ack(&d->txd)) { | |
| d40_desc_remove(d); | |
| desc = d; | |
| memset(desc, 0, sizeof(*desc)); | |
| break; | |
| } | |
| } | |
| } | |
| if (!desc) | |
| desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT); | |
| if (desc) | |
| INIT_LIST_HEAD(&desc->node); | |
| return desc; | |
| } | |
| static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d) | |
| { | |
| d40_pool_lli_free(d40c, d40d); | |
| d40_lcla_free_all(d40c, d40d); | |
| kmem_cache_free(d40c->base->desc_slab, d40d); | |
| } | |
| static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc) | |
| { | |
| list_add_tail(&desc->node, &d40c->active); | |
| } | |
| static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc) | |
| { | |
| struct d40_phy_lli *lli_dst = desc->lli_phy.dst; | |
| struct d40_phy_lli *lli_src = desc->lli_phy.src; | |
| void __iomem *base = chan_base(chan); | |
| writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG); | |
| writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT); | |
| writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR); | |
| writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK); | |
| writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG); | |
| writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT); | |
| writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR); | |
| writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK); | |
| } | |
| static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc) | |
| { | |
| list_add_tail(&desc->node, &d40c->done); | |
| } | |
| static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc) | |
| { | |
| struct d40_lcla_pool *pool = &chan->base->lcla_pool; | |
| struct d40_log_lli_bidir *lli = &desc->lli_log; | |
| int lli_current = desc->lli_current; | |
| int lli_len = desc->lli_len; | |
| bool cyclic = desc->cyclic; | |
| int curr_lcla = -EINVAL; | |
| int first_lcla = 0; | |
| bool use_esram_lcla = chan->base->plat_data->use_esram_lcla; | |
| bool linkback; | |
| /* | |
| * We may have partially running cyclic transfers, in case we did't get | |
| * enough LCLA entries. | |
| */ | |
| linkback = cyclic && lli_current == 0; | |
| /* | |
| * For linkback, we need one LCLA even with only one link, because we | |
| * can't link back to the one in LCPA space | |
| */ | |
| if (linkback || (lli_len - lli_current > 1)) { | |
| /* | |
| * If the channel is expected to use only soft_lli don't | |
| * allocate a lcla. This is to avoid a HW issue that exists | |
| * in some controller during a peripheral to memory transfer | |
| * that uses linked lists. | |
| */ | |
| if (!(chan->phy_chan->use_soft_lli && | |
| chan->dma_cfg.dir == DMA_DEV_TO_MEM)) | |
| curr_lcla = d40_lcla_alloc_one(chan, desc); | |
| first_lcla = curr_lcla; | |
| } | |
| /* | |
| * For linkback, we normally load the LCPA in the loop since we need to | |
| * link it to the second LCLA and not the first. However, if we | |
| * couldn't even get a first LCLA, then we have to run in LCPA and | |
| * reload manually. | |
| */ | |
| if (!linkback || curr_lcla == -EINVAL) { | |
| unsigned int flags = 0; | |
| if (curr_lcla == -EINVAL) | |
| flags |= LLI_TERM_INT; | |
| d40_log_lli_lcpa_write(chan->lcpa, | |
| &lli->dst[lli_current], | |
| &lli->src[lli_current], | |
| curr_lcla, | |
| flags); | |
| lli_current++; | |
| } | |
| if (curr_lcla < 0) | |
| goto set_current; | |
| for (; lli_current < lli_len; lli_current++) { | |
| unsigned int lcla_offset = chan->phy_chan->num * 1024 + | |
| 8 * curr_lcla * 2; | |
| struct d40_log_lli *lcla = pool->base + lcla_offset; | |
| unsigned int flags = 0; | |
| int next_lcla; | |
| if (lli_current + 1 < lli_len) | |
| next_lcla = d40_lcla_alloc_one(chan, desc); | |
| else | |
| next_lcla = linkback ? first_lcla : -EINVAL; | |
| if (cyclic || next_lcla == -EINVAL) | |
| flags |= LLI_TERM_INT; | |
| if (linkback && curr_lcla == first_lcla) { | |
| /* First link goes in both LCPA and LCLA */ | |
| d40_log_lli_lcpa_write(chan->lcpa, | |
| &lli->dst[lli_current], | |
| &lli->src[lli_current], | |
| next_lcla, flags); | |
| } | |
| /* | |
| * One unused LCLA in the cyclic case if the very first | |
| * next_lcla fails... | |
| */ | |
| d40_log_lli_lcla_write(lcla, | |
| &lli->dst[lli_current], | |
| &lli->src[lli_current], | |
| next_lcla, flags); | |
| /* | |
| * Cache maintenance is not needed if lcla is | |
| * mapped in esram | |
| */ | |
| if (!use_esram_lcla) { | |
| dma_sync_single_range_for_device(chan->base->dev, | |
| pool->dma_addr, lcla_offset, | |
| 2 * sizeof(struct d40_log_lli), | |
| DMA_TO_DEVICE); | |
| } | |
| curr_lcla = next_lcla; | |
| if (curr_lcla == -EINVAL || curr_lcla == first_lcla) { | |
| lli_current++; | |
| break; | |
| } | |
| } | |
| set_current: | |
| desc->lli_current = lli_current; | |
| } | |
| static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d) | |
| { | |
| if (chan_is_physical(d40c)) { | |
| d40_phy_lli_load(d40c, d40d); | |
| d40d->lli_current = d40d->lli_len; | |
| } else | |
| d40_log_lli_to_lcxa(d40c, d40d); | |
| } | |
| static struct d40_desc *d40_first_active_get(struct d40_chan *d40c) | |
| { | |
| return list_first_entry_or_null(&d40c->active, struct d40_desc, node); | |
| } | |
| /* remove desc from current queue and add it to the pending_queue */ | |
| static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc) | |
| { | |
| d40_desc_remove(desc); | |
| desc->is_in_client_list = false; | |
| list_add_tail(&desc->node, &d40c->pending_queue); | |
| } | |
| static struct d40_desc *d40_first_pending(struct d40_chan *d40c) | |
| { | |
| return list_first_entry_or_null(&d40c->pending_queue, struct d40_desc, | |
| node); | |
| } | |
| static struct d40_desc *d40_first_queued(struct d40_chan *d40c) | |
| { | |
| return list_first_entry_or_null(&d40c->queue, struct d40_desc, node); | |
| } | |
| static struct d40_desc *d40_first_done(struct d40_chan *d40c) | |
| { | |
| return list_first_entry_or_null(&d40c->done, struct d40_desc, node); | |
| } | |
| static int d40_psize_2_burst_size(bool is_log, int psize) | |
| { | |
| if (is_log) { | |
| if (psize == STEDMA40_PSIZE_LOG_1) | |
| return 1; | |
| } else { | |
| if (psize == STEDMA40_PSIZE_PHY_1) | |
| return 1; | |
| } | |
| return 2 << psize; | |
| } | |
| /* | |
| * The dma only supports transmitting packages up to | |
| * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes. | |
| * | |
| * Calculate the total number of dma elements required to send the entire sg list. | |
| */ | |
| static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2) | |
| { | |
| int dmalen; | |
| u32 max_w = max(data_width1, data_width2); | |
| u32 min_w = min(data_width1, data_width2); | |
| u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w); | |
| if (seg_max > STEDMA40_MAX_SEG_SIZE) | |
| seg_max -= max_w; | |
| if (!IS_ALIGNED(size, max_w)) | |
| return -EINVAL; | |
| if (size <= seg_max) | |
| dmalen = 1; | |
| else { | |
| dmalen = size / seg_max; | |
| if (dmalen * seg_max < size) | |
| dmalen++; | |
| } | |
| return dmalen; | |
| } | |
| static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len, | |
| u32 data_width1, u32 data_width2) | |
| { | |
| struct scatterlist *sg; | |
| int i; | |
| int len = 0; | |
| int ret; | |
| for_each_sg(sgl, sg, sg_len, i) { | |
| ret = d40_size_2_dmalen(sg_dma_len(sg), | |
| data_width1, data_width2); | |
| if (ret < 0) | |
| return ret; | |
| len += ret; | |
| } | |
| return len; | |
| } | |
| static int __d40_execute_command_phy(struct d40_chan *d40c, | |
| enum d40_command command) | |
| { | |
| u32 status; | |
| int i; | |
| void __iomem *active_reg; | |
| int ret = 0; | |
| unsigned long flags; | |
| u32 wmask; | |
| if (command == D40_DMA_STOP) { | |
| ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ); | |
| if (ret) | |
| return ret; | |
| } | |
| spin_lock_irqsave(&d40c->base->execmd_lock, flags); | |
| if (d40c->phy_chan->num % 2 == 0) | |
| active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; | |
| else | |
| active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; | |
| if (command == D40_DMA_SUSPEND_REQ) { | |
| status = (readl(active_reg) & | |
| D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> | |
| D40_CHAN_POS(d40c->phy_chan->num); | |
| if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP) | |
| goto unlock; | |
| } | |
| wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num)); | |
| writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)), | |
| active_reg); | |
| if (command == D40_DMA_SUSPEND_REQ) { | |
| for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) { | |
| status = (readl(active_reg) & | |
| D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> | |
| D40_CHAN_POS(d40c->phy_chan->num); | |
| cpu_relax(); | |
| /* | |
| * Reduce the number of bus accesses while | |
| * waiting for the DMA to suspend. | |
| */ | |
| udelay(3); | |
| if (status == D40_DMA_STOP || | |
| status == D40_DMA_SUSPENDED) | |
| break; | |
| } | |
| if (i == D40_SUSPEND_MAX_IT) { | |
| chan_err(d40c, | |
| "unable to suspend the chl %d (log: %d) status %x\n", | |
| d40c->phy_chan->num, d40c->log_num, | |
| status); | |
| dump_stack(); | |
| ret = -EBUSY; | |
| } | |
| } | |
| unlock: | |
| spin_unlock_irqrestore(&d40c->base->execmd_lock, flags); | |
| return ret; | |
| } | |
| static void d40_term_all(struct d40_chan *d40c) | |
| { | |
| struct d40_desc *d40d; | |
| struct d40_desc *_d; | |
| /* Release completed descriptors */ | |
| while ((d40d = d40_first_done(d40c))) { | |
| d40_desc_remove(d40d); | |
| d40_desc_free(d40c, d40d); | |
| } | |
| /* Release active descriptors */ | |
| while ((d40d = d40_first_active_get(d40c))) { | |
| d40_desc_remove(d40d); | |
| d40_desc_free(d40c, d40d); | |
| } | |
| /* Release queued descriptors waiting for transfer */ | |
| while ((d40d = d40_first_queued(d40c))) { | |
| d40_desc_remove(d40d); | |
| d40_desc_free(d40c, d40d); | |
| } | |
| /* Release pending descriptors */ | |
| while ((d40d = d40_first_pending(d40c))) { | |
| d40_desc_remove(d40d); | |
| d40_desc_free(d40c, d40d); | |
| } | |
| /* Release client owned descriptors */ | |
| if (!list_empty(&d40c->client)) | |
| list_for_each_entry_safe(d40d, _d, &d40c->client, node) { | |
| d40_desc_remove(d40d); | |
| d40_desc_free(d40c, d40d); | |
| } | |
| /* Release descriptors in prepare queue */ | |
| if (!list_empty(&d40c->prepare_queue)) | |
| list_for_each_entry_safe(d40d, _d, | |
| &d40c->prepare_queue, node) { | |
| d40_desc_remove(d40d); | |
| d40_desc_free(d40c, d40d); | |
| } | |
| d40c->pending_tx = 0; | |
| } | |
| static void __d40_config_set_event(struct d40_chan *d40c, | |
| enum d40_events event_type, u32 event, | |
| int reg) | |
| { | |
| void __iomem *addr = chan_base(d40c) + reg; | |
| int tries; | |
| u32 status; | |
| switch (event_type) { | |
| case D40_DEACTIVATE_EVENTLINE: | |
| writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) | |
| | ~D40_EVENTLINE_MASK(event), addr); | |
| break; | |
| case D40_SUSPEND_REQ_EVENTLINE: | |
| status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> | |
| D40_EVENTLINE_POS(event); | |
| if (status == D40_DEACTIVATE_EVENTLINE || | |
| status == D40_SUSPEND_REQ_EVENTLINE) | |
| break; | |
| writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event)) | |
| | ~D40_EVENTLINE_MASK(event), addr); | |
| for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) { | |
| status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> | |
| D40_EVENTLINE_POS(event); | |
| cpu_relax(); | |
| /* | |
| * Reduce the number of bus accesses while | |
| * waiting for the DMA to suspend. | |
| */ | |
| udelay(3); | |
| if (status == D40_DEACTIVATE_EVENTLINE) | |
| break; | |
| } | |
| if (tries == D40_SUSPEND_MAX_IT) { | |
| chan_err(d40c, | |
| "unable to stop the event_line chl %d (log: %d)" | |
| "status %x\n", d40c->phy_chan->num, | |
| d40c->log_num, status); | |
| } | |
| break; | |
| case D40_ACTIVATE_EVENTLINE: | |
| /* | |
| * The hardware sometimes doesn't register the enable when src and dst | |
| * event lines are active on the same logical channel. Retry to ensure | |
| * it does. Usually only one retry is sufficient. | |
| */ | |
| tries = 100; | |
| while (--tries) { | |
| writel((D40_ACTIVATE_EVENTLINE << | |
| D40_EVENTLINE_POS(event)) | | |
| ~D40_EVENTLINE_MASK(event), addr); | |
| if (readl(addr) & D40_EVENTLINE_MASK(event)) | |
| break; | |
| } | |
| if (tries != 99) | |
| dev_dbg(chan2dev(d40c), | |
| "[%s] workaround enable S%cLNK (%d tries)\n", | |
| __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', | |
| 100 - tries); | |
| WARN_ON(!tries); | |
| break; | |
| case D40_ROUND_EVENTLINE: | |
| BUG(); | |
| break; | |
| } | |
| } | |
| static void d40_config_set_event(struct d40_chan *d40c, | |
| enum d40_events event_type) | |
| { | |
| u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); | |
| /* Enable event line connected to device (or memcpy) */ | |
| if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || | |
| (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) | |
| __d40_config_set_event(d40c, event_type, event, | |
| D40_CHAN_REG_SSLNK); | |
| if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM) | |
| __d40_config_set_event(d40c, event_type, event, | |
| D40_CHAN_REG_SDLNK); | |
| } | |
| static u32 d40_chan_has_events(struct d40_chan *d40c) | |
| { | |
| void __iomem *chanbase = chan_base(d40c); | |
| u32 val; | |
| val = readl(chanbase + D40_CHAN_REG_SSLNK); | |
| val |= readl(chanbase + D40_CHAN_REG_SDLNK); | |
| return val; | |
| } | |
| static int | |
| __d40_execute_command_log(struct d40_chan *d40c, enum d40_command command) | |
| { | |
| unsigned long flags; | |
| int ret = 0; | |
| u32 active_status; | |
| void __iomem *active_reg; | |
| if (d40c->phy_chan->num % 2 == 0) | |
| active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; | |
| else | |
| active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; | |
| spin_lock_irqsave(&d40c->phy_chan->lock, flags); | |
| switch (command) { | |
| case D40_DMA_STOP: | |
| case D40_DMA_SUSPEND_REQ: | |
| active_status = (readl(active_reg) & | |
| D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> | |
| D40_CHAN_POS(d40c->phy_chan->num); | |
| if (active_status == D40_DMA_RUN) | |
| d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE); | |
| else | |
| d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE); | |
| if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP)) | |
| ret = __d40_execute_command_phy(d40c, command); | |
| break; | |
| case D40_DMA_RUN: | |
| d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE); | |
| ret = __d40_execute_command_phy(d40c, command); | |
| break; | |
| case D40_DMA_SUSPENDED: | |
| BUG(); | |
| break; | |
| } | |
| spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); | |
| return ret; | |
| } | |
| static int d40_channel_execute_command(struct d40_chan *d40c, | |
| enum d40_command command) | |
| { | |
| if (chan_is_logical(d40c)) | |
| return __d40_execute_command_log(d40c, command); | |
| else | |
| return __d40_execute_command_phy(d40c, command); | |
| } | |
| static u32 d40_get_prmo(struct d40_chan *d40c) | |
| { | |
| static const unsigned int phy_map[] = { | |
| [STEDMA40_PCHAN_BASIC_MODE] | |
| = D40_DREG_PRMO_PCHAN_BASIC, | |
| [STEDMA40_PCHAN_MODULO_MODE] | |
| = D40_DREG_PRMO_PCHAN_MODULO, | |
| [STEDMA40_PCHAN_DOUBLE_DST_MODE] | |
| = D40_DREG_PRMO_PCHAN_DOUBLE_DST, | |
| }; | |
| static const unsigned int log_map[] = { | |
| [STEDMA40_LCHAN_SRC_PHY_DST_LOG] | |
| = D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG, | |
| [STEDMA40_LCHAN_SRC_LOG_DST_PHY] | |
| = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY, | |
| [STEDMA40_LCHAN_SRC_LOG_DST_LOG] | |
| = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG, | |
| }; | |
| if (chan_is_physical(d40c)) | |
| return phy_map[d40c->dma_cfg.mode_opt]; | |
| else | |
| return log_map[d40c->dma_cfg.mode_opt]; | |
| } | |
| static void d40_config_write(struct d40_chan *d40c) | |
| { | |
| u32 addr_base; | |
| u32 var; | |
| /* Odd addresses are even addresses + 4 */ | |
| addr_base = (d40c->phy_chan->num % 2) * 4; | |
| /* Setup channel mode to logical or physical */ | |
| var = ((u32)(chan_is_logical(d40c)) + 1) << | |
| D40_CHAN_POS(d40c->phy_chan->num); | |
| writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base); | |
| /* Setup operational mode option register */ | |
| var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num); | |
| writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base); | |
| if (chan_is_logical(d40c)) { | |
| int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS) | |
| & D40_SREG_ELEM_LOG_LIDX_MASK; | |
| void __iomem *chanbase = chan_base(d40c); | |
| /* Set default config for CFG reg */ | |
| writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG); | |
| writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG); | |
| /* Set LIDX for lcla */ | |
| writel(lidx, chanbase + D40_CHAN_REG_SSELT); | |
| writel(lidx, chanbase + D40_CHAN_REG_SDELT); | |
| /* Clear LNK which will be used by d40_chan_has_events() */ | |
| writel(0, chanbase + D40_CHAN_REG_SSLNK); | |
| writel(0, chanbase + D40_CHAN_REG_SDLNK); | |
| } | |
| } | |
| static u32 d40_residue(struct d40_chan *d40c) | |
| { | |
| u32 num_elt; | |
| if (chan_is_logical(d40c)) | |
| num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK) | |
| >> D40_MEM_LCSP2_ECNT_POS; | |
| else { | |
| u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT); | |
| num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK) | |
| >> D40_SREG_ELEM_PHY_ECNT_POS; | |
| } | |
| return num_elt * d40c->dma_cfg.dst_info.data_width; | |
| } | |
| static bool d40_tx_is_linked(struct d40_chan *d40c) | |
| { | |
| bool is_link; | |
| if (chan_is_logical(d40c)) | |
| is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK; | |
| else | |
| is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK) | |
| & D40_SREG_LNK_PHYS_LNK_MASK; | |
| return is_link; | |
| } | |
| static int d40_pause(struct dma_chan *chan) | |
| { | |
| struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); | |
| int res = 0; | |
| unsigned long flags; | |
| if (d40c->phy_chan == NULL) { | |
| chan_err(d40c, "Channel is not allocated!\n"); | |
| return -EINVAL; | |
| } | |
| if (!d40c->busy) | |
| return 0; | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| pm_runtime_get_sync(d40c->base->dev); | |
| res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); | |
| pm_runtime_mark_last_busy(d40c->base->dev); | |
| pm_runtime_put_autosuspend(d40c->base->dev); | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| return res; | |
| } | |
| static int d40_resume(struct dma_chan *chan) | |
| { | |
| struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); | |
| int res = 0; | |
| unsigned long flags; | |
| if (d40c->phy_chan == NULL) { | |
| chan_err(d40c, "Channel is not allocated!\n"); | |
| return -EINVAL; | |
| } | |
| if (!d40c->busy) | |
| return 0; | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| pm_runtime_get_sync(d40c->base->dev); | |
| /* If bytes left to transfer or linked tx resume job */ | |
| if (d40_residue(d40c) || d40_tx_is_linked(d40c)) | |
| res = d40_channel_execute_command(d40c, D40_DMA_RUN); | |
| pm_runtime_mark_last_busy(d40c->base->dev); | |
| pm_runtime_put_autosuspend(d40c->base->dev); | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| return res; | |
| } | |
| static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) | |
| { | |
| struct d40_chan *d40c = container_of(tx->chan, | |
| struct d40_chan, | |
| chan); | |
| struct d40_desc *d40d = container_of(tx, struct d40_desc, txd); | |
| unsigned long flags; | |
| dma_cookie_t cookie; | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| cookie = dma_cookie_assign(tx); | |
| d40_desc_queue(d40c, d40d); | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| return cookie; | |
| } | |
| static int d40_start(struct d40_chan *d40c) | |
| { | |
| return d40_channel_execute_command(d40c, D40_DMA_RUN); | |
| } | |
| static struct d40_desc *d40_queue_start(struct d40_chan *d40c) | |
| { | |
| struct d40_desc *d40d; | |
| int err; | |
| /* Start queued jobs, if any */ | |
| d40d = d40_first_queued(d40c); | |
| if (d40d != NULL) { | |
| if (!d40c->busy) { | |
| d40c->busy = true; | |
| pm_runtime_get_sync(d40c->base->dev); | |
| } | |
| /* Remove from queue */ | |
| d40_desc_remove(d40d); | |
| /* Add to active queue */ | |
| d40_desc_submit(d40c, d40d); | |
| /* Initiate DMA job */ | |
| d40_desc_load(d40c, d40d); | |
| /* Start dma job */ | |
| err = d40_start(d40c); | |
| if (err) | |
| return NULL; | |
| } | |
| return d40d; | |
| } | |
| /* called from interrupt context */ | |
| static void dma_tc_handle(struct d40_chan *d40c) | |
| { | |
| struct d40_desc *d40d; | |
| /* Get first active entry from list */ | |
| d40d = d40_first_active_get(d40c); | |
| if (d40d == NULL) | |
| return; | |
| if (d40d->cyclic) { | |
| /* | |
| * If this was a paritially loaded list, we need to reloaded | |
| * it, and only when the list is completed. We need to check | |
| * for done because the interrupt will hit for every link, and | |
| * not just the last one. | |
| */ | |
| if (d40d->lli_current < d40d->lli_len | |
| && !d40_tx_is_linked(d40c) | |
| && !d40_residue(d40c)) { | |
| d40_lcla_free_all(d40c, d40d); | |
| d40_desc_load(d40c, d40d); | |
| (void) d40_start(d40c); | |
| if (d40d->lli_current == d40d->lli_len) | |
| d40d->lli_current = 0; | |
| } | |
| } else { | |
| d40_lcla_free_all(d40c, d40d); | |
| if (d40d->lli_current < d40d->lli_len) { | |
| d40_desc_load(d40c, d40d); | |
| /* Start dma job */ | |
| (void) d40_start(d40c); | |
| return; | |
| } | |
| if (d40_queue_start(d40c) == NULL) { | |
| d40c->busy = false; | |
| pm_runtime_mark_last_busy(d40c->base->dev); | |
| pm_runtime_put_autosuspend(d40c->base->dev); | |
| } | |
| d40_desc_remove(d40d); | |
| d40_desc_done(d40c, d40d); | |
| } | |
| d40c->pending_tx++; | |
| tasklet_schedule(&d40c->tasklet); | |
| } | |
| static void dma_tasklet(unsigned long data) | |
| { | |
| struct d40_chan *d40c = (struct d40_chan *) data; | |
| struct d40_desc *d40d; | |
| unsigned long flags; | |
| bool callback_active; | |
| struct dmaengine_desc_callback cb; | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| /* Get first entry from the done list */ | |
| d40d = d40_first_done(d40c); | |
| if (d40d == NULL) { | |
| /* Check if we have reached here for cyclic job */ | |
| d40d = d40_first_active_get(d40c); | |
| if (d40d == NULL || !d40d->cyclic) | |
| goto check_pending_tx; | |
| } | |
| if (!d40d->cyclic) | |
| dma_cookie_complete(&d40d->txd); | |
| /* | |
| * If terminating a channel pending_tx is set to zero. | |
| * This prevents any finished active jobs to return to the client. | |
| */ | |
| if (d40c->pending_tx == 0) { | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| return; | |
| } | |
| /* Callback to client */ | |
| callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT); | |
| dmaengine_desc_get_callback(&d40d->txd, &cb); | |
| if (!d40d->cyclic) { | |
| if (async_tx_test_ack(&d40d->txd)) { | |
| d40_desc_remove(d40d); | |
| d40_desc_free(d40c, d40d); | |
| } else if (!d40d->is_in_client_list) { | |
| d40_desc_remove(d40d); | |
| d40_lcla_free_all(d40c, d40d); | |
| list_add_tail(&d40d->node, &d40c->client); | |
| d40d->is_in_client_list = true; | |
| } | |
| } | |
| d40c->pending_tx--; | |
| if (d40c->pending_tx) | |
| tasklet_schedule(&d40c->tasklet); | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| if (callback_active) | |
| dmaengine_desc_callback_invoke(&cb, NULL); | |
| return; | |
| check_pending_tx: | |
| /* Rescue manouver if receiving double interrupts */ | |
| if (d40c->pending_tx > 0) | |
| d40c->pending_tx--; | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| } | |
| static irqreturn_t d40_handle_interrupt(int irq, void *data) | |
| { | |
| int i; | |
| u32 idx; | |
| u32 row; | |
| long chan = -1; | |
| struct d40_chan *d40c; | |
| unsigned long flags; | |
| struct d40_base *base = data; | |
| u32 regs[base->gen_dmac.il_size]; | |
| struct d40_interrupt_lookup *il = base->gen_dmac.il; | |
| u32 il_size = base->gen_dmac.il_size; | |
| spin_lock_irqsave(&base->interrupt_lock, flags); | |
| /* Read interrupt status of both logical and physical channels */ | |
| for (i = 0; i < il_size; i++) | |
| regs[i] = readl(base->virtbase + il[i].src); | |
| for (;;) { | |
| chan = find_next_bit((unsigned long *)regs, | |
| BITS_PER_LONG * il_size, chan + 1); | |
| /* No more set bits found? */ | |
| if (chan == BITS_PER_LONG * il_size) | |
| break; | |
| row = chan / BITS_PER_LONG; | |
| idx = chan & (BITS_PER_LONG - 1); | |
| if (il[row].offset == D40_PHY_CHAN) | |
| d40c = base->lookup_phy_chans[idx]; | |
| else | |
| d40c = base->lookup_log_chans[il[row].offset + idx]; | |
| if (!d40c) { | |
| /* | |
| * No error because this can happen if something else | |
| * in the system is using the channel. | |
| */ | |
| continue; | |
| } | |
| /* ACK interrupt */ | |
| writel(BIT(idx), base->virtbase + il[row].clr); | |
| spin_lock(&d40c->lock); | |
| if (!il[row].is_error) | |
| dma_tc_handle(d40c); | |
| else | |
| d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n", | |
| chan, il[row].offset, idx); | |
| spin_unlock(&d40c->lock); | |
| } | |
| spin_unlock_irqrestore(&base->interrupt_lock, flags); | |
| return IRQ_HANDLED; | |
| } | |
| static int d40_validate_conf(struct d40_chan *d40c, | |
| struct stedma40_chan_cfg *conf) | |
| { | |
| int res = 0; | |
| bool is_log = conf->mode == STEDMA40_MODE_LOGICAL; | |
| if (!conf->dir) { | |
| chan_err(d40c, "Invalid direction.\n"); | |
| res = -EINVAL; | |
| } | |
| if ((is_log && conf->dev_type > d40c->base->num_log_chans) || | |
| (!is_log && conf->dev_type > d40c->base->num_phy_chans) || | |
| (conf->dev_type < 0)) { | |
| chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type); | |
| res = -EINVAL; | |
| } | |
| if (conf->dir == DMA_DEV_TO_DEV) { | |
| /* | |
| * DMAC HW supports it. Will be added to this driver, | |
| * in case any dma client requires it. | |
| */ | |
| chan_err(d40c, "periph to periph not supported\n"); | |
| res = -EINVAL; | |
| } | |
| if (d40_psize_2_burst_size(is_log, conf->src_info.psize) * | |
| conf->src_info.data_width != | |
| d40_psize_2_burst_size(is_log, conf->dst_info.psize) * | |
| conf->dst_info.data_width) { | |
| /* | |
| * The DMAC hardware only supports | |
| * src (burst x width) == dst (burst x width) | |
| */ | |
| chan_err(d40c, "src (burst x width) != dst (burst x width)\n"); | |
| res = -EINVAL; | |
| } | |
| return res; | |
| } | |
| static bool d40_alloc_mask_set(struct d40_phy_res *phy, | |
| bool is_src, int log_event_line, bool is_log, | |
| bool *first_user) | |
| { | |
| unsigned long flags; | |
| spin_lock_irqsave(&phy->lock, flags); | |
| *first_user = ((phy->allocated_src | phy->allocated_dst) | |
| == D40_ALLOC_FREE); | |
| if (!is_log) { | |
| /* Physical interrupts are masked per physical full channel */ | |
| if (phy->allocated_src == D40_ALLOC_FREE && | |
| phy->allocated_dst == D40_ALLOC_FREE) { | |
| phy->allocated_dst = D40_ALLOC_PHY; | |
| phy->allocated_src = D40_ALLOC_PHY; | |
| goto found_unlock; | |
| } else | |
| goto not_found_unlock; | |
| } | |
| /* Logical channel */ | |
| if (is_src) { | |
| if (phy->allocated_src == D40_ALLOC_PHY) | |
| goto not_found_unlock; | |
| if (phy->allocated_src == D40_ALLOC_FREE) | |
| phy->allocated_src = D40_ALLOC_LOG_FREE; | |
| if (!(phy->allocated_src & BIT(log_event_line))) { | |
| phy->allocated_src |= BIT(log_event_line); | |
| goto found_unlock; | |
| } else | |
| goto not_found_unlock; | |
| } else { | |
| if (phy->allocated_dst == D40_ALLOC_PHY) | |
| goto not_found_unlock; | |
| if (phy->allocated_dst == D40_ALLOC_FREE) | |
| phy->allocated_dst = D40_ALLOC_LOG_FREE; | |
| if (!(phy->allocated_dst & BIT(log_event_line))) { | |
| phy->allocated_dst |= BIT(log_event_line); | |
| goto found_unlock; | |
| } | |
| } | |
| not_found_unlock: | |
| spin_unlock_irqrestore(&phy->lock, flags); | |
| return false; | |
| found_unlock: | |
| spin_unlock_irqrestore(&phy->lock, flags); | |
| return true; | |
| } | |
| static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src, | |
| int log_event_line) | |
| { | |
| unsigned long flags; | |
| bool is_free = false; | |
| spin_lock_irqsave(&phy->lock, flags); | |
| if (!log_event_line) { | |
| phy->allocated_dst = D40_ALLOC_FREE; | |
| phy->allocated_src = D40_ALLOC_FREE; | |
| is_free = true; | |
| goto unlock; | |
| } | |
| /* Logical channel */ | |
| if (is_src) { | |
| phy->allocated_src &= ~BIT(log_event_line); | |
| if (phy->allocated_src == D40_ALLOC_LOG_FREE) | |
| phy->allocated_src = D40_ALLOC_FREE; | |
| } else { | |
| phy->allocated_dst &= ~BIT(log_event_line); | |
| if (phy->allocated_dst == D40_ALLOC_LOG_FREE) | |
| phy->allocated_dst = D40_ALLOC_FREE; | |
| } | |
| is_free = ((phy->allocated_src | phy->allocated_dst) == | |
| D40_ALLOC_FREE); | |
| unlock: | |
| spin_unlock_irqrestore(&phy->lock, flags); | |
| return is_free; | |
| } | |
| static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user) | |
| { | |
| int dev_type = d40c->dma_cfg.dev_type; | |
| int event_group; | |
| int event_line; | |
| struct d40_phy_res *phys; | |
| int i; | |
| int j; | |
| int log_num; | |
| int num_phy_chans; | |
| bool is_src; | |
| bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL; | |
| phys = d40c->base->phy_res; | |
| num_phy_chans = d40c->base->num_phy_chans; | |
| if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { | |
| log_num = 2 * dev_type; | |
| is_src = true; | |
| } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || | |
| d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { | |
| /* dst event lines are used for logical memcpy */ | |
| log_num = 2 * dev_type + 1; | |
| is_src = false; | |
| } else | |
| return -EINVAL; | |
| event_group = D40_TYPE_TO_GROUP(dev_type); | |
| event_line = D40_TYPE_TO_EVENT(dev_type); | |
| if (!is_log) { | |
| if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { | |
| /* Find physical half channel */ | |
| if (d40c->dma_cfg.use_fixed_channel) { | |
| i = d40c->dma_cfg.phy_channel; | |
| if (d40_alloc_mask_set(&phys[i], is_src, | |
| 0, is_log, | |
| first_phy_user)) | |
| goto found_phy; | |
| } else { | |
| for (i = 0; i < num_phy_chans; i++) { | |
| if (d40_alloc_mask_set(&phys[i], is_src, | |
| 0, is_log, | |
| first_phy_user)) | |
| goto found_phy; | |
| } | |
| } | |
| } else | |
| for (j = 0; j < d40c->base->num_phy_chans; j += 8) { | |
| int phy_num = j + event_group * 2; | |
| for (i = phy_num; i < phy_num + 2; i++) { | |
| if (d40_alloc_mask_set(&phys[i], | |
| is_src, | |
| 0, | |
| is_log, | |
| first_phy_user)) | |
| goto found_phy; | |
| } | |
| } | |
| return -EINVAL; | |
| found_phy: | |
| d40c->phy_chan = &phys[i]; | |
| d40c->log_num = D40_PHY_CHAN; | |
| goto out; | |
| } | |
| if (dev_type == -1) | |
| return -EINVAL; | |
| /* Find logical channel */ | |
| for (j = 0; j < d40c->base->num_phy_chans; j += 8) { | |
| int phy_num = j + event_group * 2; | |
| if (d40c->dma_cfg.use_fixed_channel) { | |
| i = d40c->dma_cfg.phy_channel; | |
| if ((i != phy_num) && (i != phy_num + 1)) { | |
| dev_err(chan2dev(d40c), | |
| "invalid fixed phy channel %d\n", i); | |
| return -EINVAL; | |
| } | |
| if (d40_alloc_mask_set(&phys[i], is_src, event_line, | |
| is_log, first_phy_user)) | |
| goto found_log; | |
| dev_err(chan2dev(d40c), | |
| "could not allocate fixed phy channel %d\n", i); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Spread logical channels across all available physical rather | |
| * than pack every logical channel at the first available phy | |
| * channels. | |
| */ | |
| if (is_src) { | |
| for (i = phy_num; i < phy_num + 2; i++) { | |
| if (d40_alloc_mask_set(&phys[i], is_src, | |
| event_line, is_log, | |
| first_phy_user)) | |
| goto found_log; | |
| } | |
| } else { | |
| for (i = phy_num + 1; i >= phy_num; i--) { | |
| if (d40_alloc_mask_set(&phys[i], is_src, | |
| event_line, is_log, | |
| first_phy_user)) | |
| goto found_log; | |
| } | |
| } | |
| } | |
| return -EINVAL; | |
| found_log: | |
| d40c->phy_chan = &phys[i]; | |
| d40c->log_num = log_num; | |
| out: | |
| if (is_log) | |
| d40c->base->lookup_log_chans[d40c->log_num] = d40c; | |
| else | |
| d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c; | |
| return 0; | |
| } | |
| static int d40_config_memcpy(struct d40_chan *d40c) | |
| { | |
| dma_cap_mask_t cap = d40c->chan.device->cap_mask; | |
| if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) { | |
| d40c->dma_cfg = dma40_memcpy_conf_log; | |
| d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id]; | |
| d40_log_cfg(&d40c->dma_cfg, | |
| &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); | |
| } else if (dma_has_cap(DMA_MEMCPY, cap) && | |
| dma_has_cap(DMA_SLAVE, cap)) { | |
| d40c->dma_cfg = dma40_memcpy_conf_phy; | |
| /* Generate interrrupt at end of transfer or relink. */ | |
| d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS); | |
| /* Generate interrupt on error. */ | |
| d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); | |
| d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS); | |
| } else { | |
| chan_err(d40c, "No memcpy\n"); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int d40_free_dma(struct d40_chan *d40c) | |
| { | |
| int res = 0; | |
| u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); | |
| struct d40_phy_res *phy = d40c->phy_chan; | |
| bool is_src; | |
| /* Terminate all queued and active transfers */ | |
| d40_term_all(d40c); | |
| if (phy == NULL) { | |
| chan_err(d40c, "phy == null\n"); | |
| return -EINVAL; | |
| } | |
| if (phy->allocated_src == D40_ALLOC_FREE && | |
| phy->allocated_dst == D40_ALLOC_FREE) { | |
| chan_err(d40c, "channel already free\n"); | |
| return -EINVAL; | |
| } | |
| if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || | |
| d40c->dma_cfg.dir == DMA_MEM_TO_MEM) | |
| is_src = false; | |
| else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) | |
| is_src = true; | |
| else { | |
| chan_err(d40c, "Unknown direction\n"); | |
| return -EINVAL; | |
| } | |
| pm_runtime_get_sync(d40c->base->dev); | |
| res = d40_channel_execute_command(d40c, D40_DMA_STOP); | |
| if (res) { | |
| chan_err(d40c, "stop failed\n"); | |
| goto mark_last_busy; | |
| } | |
| d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0); | |
| if (chan_is_logical(d40c)) | |
| d40c->base->lookup_log_chans[d40c->log_num] = NULL; | |
| else | |
| d40c->base->lookup_phy_chans[phy->num] = NULL; | |
| if (d40c->busy) { | |
| pm_runtime_mark_last_busy(d40c->base->dev); | |
| pm_runtime_put_autosuspend(d40c->base->dev); | |
| } | |
| d40c->busy = false; | |
| d40c->phy_chan = NULL; | |
| d40c->configured = false; | |
| mark_last_busy: | |
| pm_runtime_mark_last_busy(d40c->base->dev); | |
| pm_runtime_put_autosuspend(d40c->base->dev); | |
| return res; | |
| } | |
| static bool d40_is_paused(struct d40_chan *d40c) | |
| { | |
| void __iomem *chanbase = chan_base(d40c); | |
| bool is_paused = false; | |
| unsigned long flags; | |
| void __iomem *active_reg; | |
| u32 status; | |
| u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type); | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| if (chan_is_physical(d40c)) { | |
| if (d40c->phy_chan->num % 2 == 0) | |
| active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; | |
| else | |
| active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; | |
| status = (readl(active_reg) & | |
| D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> | |
| D40_CHAN_POS(d40c->phy_chan->num); | |
| if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP) | |
| is_paused = true; | |
| goto unlock; | |
| } | |
| if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV || | |
| d40c->dma_cfg.dir == DMA_MEM_TO_MEM) { | |
| status = readl(chanbase + D40_CHAN_REG_SDLNK); | |
| } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) { | |
| status = readl(chanbase + D40_CHAN_REG_SSLNK); | |
| } else { | |
| chan_err(d40c, "Unknown direction\n"); | |
| goto unlock; | |
| } | |
| status = (status & D40_EVENTLINE_MASK(event)) >> | |
| D40_EVENTLINE_POS(event); | |
| if (status != D40_DMA_RUN) | |
| is_paused = true; | |
| unlock: | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| return is_paused; | |
| } | |
| static u32 stedma40_residue(struct dma_chan *chan) | |
| { | |
| struct d40_chan *d40c = | |
| container_of(chan, struct d40_chan, chan); | |
| u32 bytes_left; | |
| unsigned long flags; | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| bytes_left = d40_residue(d40c); | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| return bytes_left; | |
| } | |
| static int | |
| d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc, | |
| struct scatterlist *sg_src, struct scatterlist *sg_dst, | |
| unsigned int sg_len, dma_addr_t src_dev_addr, | |
| dma_addr_t dst_dev_addr) | |
| { | |
| struct stedma40_chan_cfg *cfg = &chan->dma_cfg; | |
| struct stedma40_half_channel_info *src_info = &cfg->src_info; | |
| struct stedma40_half_channel_info *dst_info = &cfg->dst_info; | |
| int ret; | |
| ret = d40_log_sg_to_lli(sg_src, sg_len, | |
| src_dev_addr, | |
| desc->lli_log.src, | |
| chan->log_def.lcsp1, | |
| src_info->data_width, | |
| dst_info->data_width); | |
| ret = d40_log_sg_to_lli(sg_dst, sg_len, | |
| dst_dev_addr, | |
| desc->lli_log.dst, | |
| chan->log_def.lcsp3, | |
| dst_info->data_width, | |
| src_info->data_width); | |
| return ret < 0 ? ret : 0; | |
| } | |
| static int | |
| d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc, | |
| struct scatterlist *sg_src, struct scatterlist *sg_dst, | |
| unsigned int sg_len, dma_addr_t src_dev_addr, | |
| dma_addr_t dst_dev_addr) | |
| { | |
| struct stedma40_chan_cfg *cfg = &chan->dma_cfg; | |
| struct stedma40_half_channel_info *src_info = &cfg->src_info; | |
| struct stedma40_half_channel_info *dst_info = &cfg->dst_info; | |
| unsigned long flags = 0; | |
| int ret; | |
| if (desc->cyclic) | |
| flags |= LLI_CYCLIC | LLI_TERM_INT; | |
| ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr, | |
| desc->lli_phy.src, | |
| virt_to_phys(desc->lli_phy.src), | |
| chan->src_def_cfg, | |
| src_info, dst_info, flags); | |
| ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr, | |
| desc->lli_phy.dst, | |
| virt_to_phys(desc->lli_phy.dst), | |
| chan->dst_def_cfg, | |
| dst_info, src_info, flags); | |
| dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr, | |
| desc->lli_pool.size, DMA_TO_DEVICE); | |
| return ret < 0 ? ret : 0; | |
| } | |
| static struct d40_desc * | |
| d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg, | |
| unsigned int sg_len, unsigned long dma_flags) | |
| { | |
| struct stedma40_chan_cfg *cfg; | |
| struct d40_desc *desc; | |
| int ret; | |
| desc = d40_desc_get(chan); | |
| if (!desc) | |
| return NULL; | |
| cfg = &chan->dma_cfg; | |
| desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width, | |
| cfg->dst_info.data_width); | |
| if (desc->lli_len < 0) { | |
| chan_err(chan, "Unaligned size\n"); | |
| goto free_desc; | |
| } | |
| ret = d40_pool_lli_alloc(chan, desc, desc->lli_len); | |
| if (ret < 0) { | |
| chan_err(chan, "Could not allocate lli\n"); | |
| goto free_desc; | |
| } | |
| desc->lli_current = 0; | |
| desc->txd.flags = dma_flags; | |
| desc->txd.tx_submit = d40_tx_submit; | |
| dma_async_tx_descriptor_init(&desc->txd, &chan->chan); | |
| return desc; | |
| free_desc: | |
| d40_desc_free(chan, desc); | |
| return NULL; | |
| } | |
| static struct dma_async_tx_descriptor * | |
| d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, | |
| struct scatterlist *sg_dst, unsigned int sg_len, | |
| enum dma_transfer_direction direction, unsigned long dma_flags) | |
| { | |
| struct d40_chan *chan = container_of(dchan, struct d40_chan, chan); | |
| dma_addr_t src_dev_addr; | |
| dma_addr_t dst_dev_addr; | |
| struct d40_desc *desc; | |
| unsigned long flags; | |
| int ret; | |
| if (!chan->phy_chan) { | |
| chan_err(chan, "Cannot prepare unallocated channel\n"); | |
| return NULL; | |
| } | |
| spin_lock_irqsave(&chan->lock, flags); | |
| desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags); | |
| if (desc == NULL) | |
| goto unlock; | |
| if (sg_next(&sg_src[sg_len - 1]) == sg_src) | |
| desc->cyclic = true; | |
| src_dev_addr = 0; | |
| dst_dev_addr = 0; | |
| if (direction == DMA_DEV_TO_MEM) | |
| src_dev_addr = chan->runtime_addr; | |
| else if (direction == DMA_MEM_TO_DEV) | |
| dst_dev_addr = chan->runtime_addr; | |
| if (chan_is_logical(chan)) | |
| ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst, | |
| sg_len, src_dev_addr, dst_dev_addr); | |
| else | |
| ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst, | |
| sg_len, src_dev_addr, dst_dev_addr); | |
| if (ret) { | |
| chan_err(chan, "Failed to prepare %s sg job: %d\n", | |
| chan_is_logical(chan) ? "log" : "phy", ret); | |
| goto free_desc; | |
| } | |
| /* | |
| * add descriptor to the prepare queue in order to be able | |
| * to free them later in terminate_all | |
| */ | |
| list_add_tail(&desc->node, &chan->prepare_queue); | |
| spin_unlock_irqrestore(&chan->lock, flags); | |
| return &desc->txd; | |
| free_desc: | |
| d40_desc_free(chan, desc); | |
| unlock: | |
| spin_unlock_irqrestore(&chan->lock, flags); | |
| return NULL; | |
| } | |
| bool stedma40_filter(struct dma_chan *chan, void *data) | |
| { | |
| struct stedma40_chan_cfg *info = data; | |
| struct d40_chan *d40c = | |
| container_of(chan, struct d40_chan, chan); | |
| int err; | |
| if (data) { | |
| err = d40_validate_conf(d40c, info); | |
| if (!err) | |
| d40c->dma_cfg = *info; | |
| } else | |
| err = d40_config_memcpy(d40c); | |
| if (!err) | |
| d40c->configured = true; | |
| return err == 0; | |
| } | |
| EXPORT_SYMBOL(stedma40_filter); | |
| static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src) | |
| { | |
| bool realtime = d40c->dma_cfg.realtime; | |
| bool highprio = d40c->dma_cfg.high_priority; | |
| u32 rtreg; | |
| u32 event = D40_TYPE_TO_EVENT(dev_type); | |
| u32 group = D40_TYPE_TO_GROUP(dev_type); | |
| u32 bit = BIT(event); | |
| u32 prioreg; | |
| struct d40_gen_dmac *dmac = &d40c->base->gen_dmac; | |
| rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear; | |
| /* | |
| * Due to a hardware bug, in some cases a logical channel triggered by | |
| * a high priority destination event line can generate extra packet | |
| * transactions. | |
| * | |
| * The workaround is to not set the high priority level for the | |
| * destination event lines that trigger logical channels. | |
| */ | |
| if (!src && chan_is_logical(d40c)) | |
| highprio = false; | |
| prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear; | |
| /* Destination event lines are stored in the upper halfword */ | |
| if (!src) | |
| bit <<= 16; | |
| writel(bit, d40c->base->virtbase + prioreg + group * 4); | |
| writel(bit, d40c->base->virtbase + rtreg + group * 4); | |
| } | |
| static void d40_set_prio_realtime(struct d40_chan *d40c) | |
| { | |
| if (d40c->base->rev < 3) | |
| return; | |
| if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) || | |
| (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) | |
| __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true); | |
| if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) || | |
| (d40c->dma_cfg.dir == DMA_DEV_TO_DEV)) | |
| __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false); | |
| } | |
| #define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1) | |
| #define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1) | |
| #define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1) | |
| #define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1) | |
| #define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1) | |
| static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, | |
| struct of_dma *ofdma) | |
| { | |
| struct stedma40_chan_cfg cfg; | |
| dma_cap_mask_t cap; | |
| u32 flags; | |
| memset(&cfg, 0, sizeof(struct stedma40_chan_cfg)); | |
| dma_cap_zero(cap); | |
| dma_cap_set(DMA_SLAVE, cap); | |
| cfg.dev_type = dma_spec->args[0]; | |
| flags = dma_spec->args[2]; | |
| switch (D40_DT_FLAGS_MODE(flags)) { | |
| case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break; | |
| case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break; | |
| } | |
| switch (D40_DT_FLAGS_DIR(flags)) { | |
| case 0: | |
| cfg.dir = DMA_MEM_TO_DEV; | |
| cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); | |
| break; | |
| case 1: | |
| cfg.dir = DMA_DEV_TO_MEM; | |
| cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags); | |
| break; | |
| } | |
| if (D40_DT_FLAGS_FIXED_CHAN(flags)) { | |
| cfg.phy_channel = dma_spec->args[1]; | |
| cfg.use_fixed_channel = true; | |
| } | |
| if (D40_DT_FLAGS_HIGH_PRIO(flags)) | |
| cfg.high_priority = true; | |
| return dma_request_channel(cap, stedma40_filter, &cfg); | |
| } | |
| /* DMA ENGINE functions */ | |
| static int d40_alloc_chan_resources(struct dma_chan *chan) | |
| { | |
| int err; | |
| unsigned long flags; | |
| struct d40_chan *d40c = | |
| container_of(chan, struct d40_chan, chan); | |
| bool is_free_phy; | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| dma_cookie_init(chan); | |
| /* If no dma configuration is set use default configuration (memcpy) */ | |
| if (!d40c->configured) { | |
| err = d40_config_memcpy(d40c); | |
| if (err) { | |
| chan_err(d40c, "Failed to configure memcpy channel\n"); | |
| goto mark_last_busy; | |
| } | |
| } | |
| err = d40_allocate_channel(d40c, &is_free_phy); | |
| if (err) { | |
| chan_err(d40c, "Failed to allocate channel\n"); | |
| d40c->configured = false; | |
| goto mark_last_busy; | |
| } | |
| pm_runtime_get_sync(d40c->base->dev); | |
| d40_set_prio_realtime(d40c); | |
| if (chan_is_logical(d40c)) { | |
| if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) | |
| d40c->lcpa = d40c->base->lcpa_base + | |
| d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE; | |
| else | |
| d40c->lcpa = d40c->base->lcpa_base + | |
| d40c->dma_cfg.dev_type * | |
| D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA; | |
| /* Unmask the Global Interrupt Mask. */ | |
| d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); | |
| d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS); | |
| } | |
| dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n", | |
| chan_is_logical(d40c) ? "logical" : "physical", | |
| d40c->phy_chan->num, | |
| d40c->dma_cfg.use_fixed_channel ? ", fixed" : ""); | |
| /* | |
| * Only write channel configuration to the DMA if the physical | |
| * resource is free. In case of multiple logical channels | |
| * on the same physical resource, only the first write is necessary. | |
| */ | |
| if (is_free_phy) | |
| d40_config_write(d40c); | |
| mark_last_busy: | |
| pm_runtime_mark_last_busy(d40c->base->dev); | |
| pm_runtime_put_autosuspend(d40c->base->dev); | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| return err; | |
| } | |
| static void d40_free_chan_resources(struct dma_chan *chan) | |
| { | |
| struct d40_chan *d40c = | |
| container_of(chan, struct d40_chan, chan); | |
| int err; | |
| unsigned long flags; | |
| if (d40c->phy_chan == NULL) { | |
| chan_err(d40c, "Cannot free unallocated channel\n"); | |
| return; | |
| } | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| err = d40_free_dma(d40c); | |
| if (err) | |
| chan_err(d40c, "Failed to free channel\n"); | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| } | |
| static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan, | |
| dma_addr_t dst, | |
| dma_addr_t src, | |
| size_t size, | |
| unsigned long dma_flags) | |
| { | |
| struct scatterlist dst_sg; | |
| struct scatterlist src_sg; | |
| sg_init_table(&dst_sg, 1); | |
| sg_init_table(&src_sg, 1); | |
| sg_dma_address(&dst_sg) = dst; | |
| sg_dma_address(&src_sg) = src; | |
| sg_dma_len(&dst_sg) = size; | |
| sg_dma_len(&src_sg) = size; | |
| return d40_prep_sg(chan, &src_sg, &dst_sg, 1, | |
| DMA_MEM_TO_MEM, dma_flags); | |
| } | |
| static struct dma_async_tx_descriptor * | |
| d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, | |
| unsigned int sg_len, enum dma_transfer_direction direction, | |
| unsigned long dma_flags, void *context) | |
| { | |
| if (!is_slave_direction(direction)) | |
| return NULL; | |
| return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags); | |
| } | |
| static struct dma_async_tx_descriptor * | |
| dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr, | |
| size_t buf_len, size_t period_len, | |
| enum dma_transfer_direction direction, unsigned long flags) | |
| { | |
| unsigned int periods = buf_len / period_len; | |
| struct dma_async_tx_descriptor *txd; | |
| struct scatterlist *sg; | |
| int i; | |
| sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT); | |
| if (!sg) | |
| return NULL; | |
| for (i = 0; i < periods; i++) { | |
| sg_dma_address(&sg[i]) = dma_addr; | |
| sg_dma_len(&sg[i]) = period_len; | |
| dma_addr += period_len; | |
| } | |
| sg_chain(sg, periods + 1, sg); | |
| txd = d40_prep_sg(chan, sg, sg, periods, direction, | |
| DMA_PREP_INTERRUPT); | |
| kfree(sg); | |
| return txd; | |
| } | |
| static enum dma_status d40_tx_status(struct dma_chan *chan, | |
| dma_cookie_t cookie, | |
| struct dma_tx_state *txstate) | |
| { | |
| struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); | |
| enum dma_status ret; | |
| if (d40c->phy_chan == NULL) { | |
| chan_err(d40c, "Cannot read status of unallocated channel\n"); | |
| return -EINVAL; | |
| } | |
| ret = dma_cookie_status(chan, cookie, txstate); | |
| if (ret != DMA_COMPLETE && txstate) | |
| dma_set_residue(txstate, stedma40_residue(chan)); | |
| if (d40_is_paused(d40c)) | |
| ret = DMA_PAUSED; | |
| return ret; | |
| } | |
| static void d40_issue_pending(struct dma_chan *chan) | |
| { | |
| struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); | |
| unsigned long flags; | |
| if (d40c->phy_chan == NULL) { | |
| chan_err(d40c, "Channel is not allocated!\n"); | |
| return; | |
| } | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| list_splice_tail_init(&d40c->pending_queue, &d40c->queue); | |
| /* Busy means that queued jobs are already being processed */ | |
| if (!d40c->busy) | |
| (void) d40_queue_start(d40c); | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| } | |
| static int d40_terminate_all(struct dma_chan *chan) | |
| { | |
| unsigned long flags; | |
| struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); | |
| int ret; | |
| if (d40c->phy_chan == NULL) { | |
| chan_err(d40c, "Channel is not allocated!\n"); | |
| return -EINVAL; | |
| } | |
| spin_lock_irqsave(&d40c->lock, flags); | |
| pm_runtime_get_sync(d40c->base->dev); | |
| ret = d40_channel_execute_command(d40c, D40_DMA_STOP); | |
| if (ret) | |
| chan_err(d40c, "Failed to stop channel\n"); | |
| d40_term_all(d40c); | |
| pm_runtime_mark_last_busy(d40c->base->dev); | |
| pm_runtime_put_autosuspend(d40c->base->dev); | |
| if (d40c->busy) { | |
| pm_runtime_mark_last_busy(d40c->base->dev); | |
| pm_runtime_put_autosuspend(d40c->base->dev); | |
| } | |
| d40c->busy = false; | |
| spin_unlock_irqrestore(&d40c->lock, flags); | |
| return 0; | |
| } | |
| static int | |
| dma40_config_to_halfchannel(struct d40_chan *d40c, | |
| struct stedma40_half_channel_info *info, | |
| u32 maxburst) | |
| { | |
| int psize; | |
| if (chan_is_logical(d40c)) { | |
| if (maxburst >= 16) | |
| psize = STEDMA40_PSIZE_LOG_16; | |
| else if (maxburst >= 8) | |
| psize = STEDMA40_PSIZE_LOG_8; | |
| else if (maxburst >= 4) | |
| psize = STEDMA40_PSIZE_LOG_4; | |
| else | |
| psize = STEDMA40_PSIZE_LOG_1; | |
| } else { | |
| if (maxburst >= 16) | |
| psize = STEDMA40_PSIZE_PHY_16; | |
| else if (maxburst >= 8) | |
| psize = STEDMA40_PSIZE_PHY_8; | |
| else if (maxburst >= 4) | |
| psize = STEDMA40_PSIZE_PHY_4; | |
| else | |
| psize = STEDMA40_PSIZE_PHY_1; | |
| } | |
| info->psize = psize; | |
| info->flow_ctrl = STEDMA40_NO_FLOW_CTRL; | |
| return 0; | |
| } | |
| /* Runtime reconfiguration extension */ | |
| static int d40_set_runtime_config(struct dma_chan *chan, | |
| struct dma_slave_config *config) | |
| { | |
| struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); | |
| struct stedma40_chan_cfg *cfg = &d40c->dma_cfg; | |
| enum dma_slave_buswidth src_addr_width, dst_addr_width; | |
| dma_addr_t config_addr; | |
| u32 src_maxburst, dst_maxburst; | |
| int ret; | |
| if (d40c->phy_chan == NULL) { | |
| chan_err(d40c, "Channel is not allocated!\n"); | |
| return -EINVAL; | |
| } | |
| src_addr_width = config->src_addr_width; | |
| src_maxburst = config->src_maxburst; | |
| dst_addr_width = config->dst_addr_width; | |
| dst_maxburst = config->dst_maxburst; | |
| if (config->direction == DMA_DEV_TO_MEM) { | |
| config_addr = config->src_addr; | |
| if (cfg->dir != DMA_DEV_TO_MEM) | |
| dev_dbg(d40c->base->dev, | |
| "channel was not configured for peripheral " | |
| "to memory transfer (%d) overriding\n", | |
| cfg->dir); | |
| cfg->dir = DMA_DEV_TO_MEM; | |
| /* Configure the memory side */ | |
| if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) | |
| dst_addr_width = src_addr_width; | |
| if (dst_maxburst == 0) | |
| dst_maxburst = src_maxburst; | |
| } else if (config->direction == DMA_MEM_TO_DEV) { | |
| config_addr = config->dst_addr; | |
| if (cfg->dir != DMA_MEM_TO_DEV) | |
| dev_dbg(d40c->base->dev, | |
| "channel was not configured for memory " | |
| "to peripheral transfer (%d) overriding\n", | |
| cfg->dir); | |
| cfg->dir = DMA_MEM_TO_DEV; | |
| /* Configure the memory side */ | |
| if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) | |
| src_addr_width = dst_addr_width; | |
| if (src_maxburst == 0) | |
| src_maxburst = dst_maxburst; | |
| } else { | |
| dev_err(d40c->base->dev, | |
| "unrecognized channel direction %d\n", | |
| config->direction); | |
| return -EINVAL; | |
| } | |
| if (config_addr <= 0) { | |
| dev_err(d40c->base->dev, "no address supplied\n"); | |
| return -EINVAL; | |
| } | |
| if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) { | |
| dev_err(d40c->base->dev, | |
| "src/dst width/maxburst mismatch: %d*%d != %d*%d\n", | |
| src_maxburst, | |
| src_addr_width, | |
| dst_maxburst, | |
| dst_addr_width); | |
| return -EINVAL; | |
| } | |
| if (src_maxburst > 16) { | |
| src_maxburst = 16; | |
| dst_maxburst = src_maxburst * src_addr_width / dst_addr_width; | |
| } else if (dst_maxburst > 16) { | |
| dst_maxburst = 16; | |
| src_maxburst = dst_maxburst * dst_addr_width / src_addr_width; | |
| } | |
| /* Only valid widths are; 1, 2, 4 and 8. */ | |
| if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || | |
| src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || | |
| dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED || | |
| dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES || | |
| !is_power_of_2(src_addr_width) || | |
| !is_power_of_2(dst_addr_width)) | |
| return -EINVAL; | |
| cfg->src_info.data_width = src_addr_width; | |
| cfg->dst_info.data_width = dst_addr_width; | |
| ret = dma40_config_to_halfchannel(d40c, &cfg->src_info, | |
| src_maxburst); | |
| if (ret) | |
| return ret; | |
| ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info, | |
| dst_maxburst); | |
| if (ret) | |
| return ret; | |
| /* Fill in register values */ | |
| if (chan_is_logical(d40c)) | |
| d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3); | |
| else | |
| d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg); | |
| /* These settings will take precedence later */ | |
| d40c->runtime_addr = config_addr; | |
| d40c->runtime_direction = config->direction; | |
| dev_dbg(d40c->base->dev, | |
| "configured channel %s for %s, data width %d/%d, " | |
| "maxburst %d/%d elements, LE, no flow control\n", | |
| dma_chan_name(chan), | |
| (config->direction == DMA_DEV_TO_MEM) ? "RX" : "TX", | |
| src_addr_width, dst_addr_width, | |
| src_maxburst, dst_maxburst); | |
| return 0; | |
| } | |
| /* Initialization functions */ | |
| static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma, | |
| struct d40_chan *chans, int offset, | |
| int num_chans) | |
| { | |
| int i = 0; | |
| struct d40_chan *d40c; | |
| INIT_LIST_HEAD(&dma->channels); | |
| for (i = offset; i < offset + num_chans; i++) { | |
| d40c = &chans[i]; | |
| d40c->base = base; | |
| d40c->chan.device = dma; | |
| spin_lock_init(&d40c->lock); | |
| d40c->log_num = D40_PHY_CHAN; | |
| INIT_LIST_HEAD(&d40c->done); | |
| INIT_LIST_HEAD(&d40c->active); | |
| INIT_LIST_HEAD(&d40c->queue); | |
| INIT_LIST_HEAD(&d40c->pending_queue); | |
| INIT_LIST_HEAD(&d40c->client); | |
| INIT_LIST_HEAD(&d40c->prepare_queue); | |
| tasklet_init(&d40c->tasklet, dma_tasklet, | |
| (unsigned long) d40c); | |
| list_add_tail(&d40c->chan.device_node, | |
| &dma->channels); | |
| } | |
| } | |
| static void d40_ops_init(struct d40_base *base, struct dma_device *dev) | |
| { | |
| if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) { | |
| dev->device_prep_slave_sg = d40_prep_slave_sg; | |
| dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV); | |
| } | |
| if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) { | |
| dev->device_prep_dma_memcpy = d40_prep_memcpy; | |
| dev->directions = BIT(DMA_MEM_TO_MEM); | |
| /* | |
| * This controller can only access address at even | |
| * 32bit boundaries, i.e. 2^2 | |
| */ | |
| dev->copy_align = DMAENGINE_ALIGN_4_BYTES; | |
| } | |
| if (dma_has_cap(DMA_CYCLIC, dev->cap_mask)) | |
| dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic; | |
| dev->device_alloc_chan_resources = d40_alloc_chan_resources; | |
| dev->device_free_chan_resources = d40_free_chan_resources; | |
| dev->device_issue_pending = d40_issue_pending; | |
| dev->device_tx_status = d40_tx_status; | |
| dev->device_config = d40_set_runtime_config; | |
| dev->device_pause = d40_pause; | |
| dev->device_resume = d40_resume; | |
| dev->device_terminate_all = d40_terminate_all; | |
| dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST; | |
| dev->dev = base->dev; | |
| } | |
| static int __init d40_dmaengine_init(struct d40_base *base, | |
| int num_reserved_chans) | |
| { | |
| int err ; | |
| d40_chan_init(base, &base->dma_slave, base->log_chans, | |
| 0, base->num_log_chans); | |
| dma_cap_zero(base->dma_slave.cap_mask); | |
| dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask); | |
| dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask); | |
| d40_ops_init(base, &base->dma_slave); | |
| err = dma_async_device_register(&base->dma_slave); | |
| if (err) { | |
| d40_err(base->dev, "Failed to register slave channels\n"); | |
| goto exit; | |
| } | |
| d40_chan_init(base, &base->dma_memcpy, base->log_chans, | |
| base->num_log_chans, base->num_memcpy_chans); | |
| dma_cap_zero(base->dma_memcpy.cap_mask); | |
| dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask); | |
| d40_ops_init(base, &base->dma_memcpy); | |
| err = dma_async_device_register(&base->dma_memcpy); | |
| if (err) { | |
| d40_err(base->dev, | |
| "Failed to register memcpy only channels\n"); | |
| goto unregister_slave; | |
| } | |
| d40_chan_init(base, &base->dma_both, base->phy_chans, | |
| 0, num_reserved_chans); | |
| dma_cap_zero(base->dma_both.cap_mask); | |
| dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask); | |
| dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask); | |
| dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask); | |
| d40_ops_init(base, &base->dma_both); | |
| err = dma_async_device_register(&base->dma_both); | |
| if (err) { | |
| d40_err(base->dev, | |
| "Failed to register logical and physical capable channels\n"); | |
| goto unregister_memcpy; | |
| } | |
| return 0; | |
| unregister_memcpy: | |
| dma_async_device_unregister(&base->dma_memcpy); | |
| unregister_slave: | |
| dma_async_device_unregister(&base->dma_slave); | |
| exit: | |
| return err; | |
| } | |
| /* Suspend resume functionality */ | |
| #ifdef CONFIG_PM_SLEEP | |
| static int dma40_suspend(struct device *dev) | |
| { | |
| struct d40_base *base = dev_get_drvdata(dev); | |
| int ret; | |
| ret = pm_runtime_force_suspend(dev); | |
| if (ret) | |
| return ret; | |
| if (base->lcpa_regulator) | |
| ret = regulator_disable(base->lcpa_regulator); | |
| return ret; | |
| } | |
| static int dma40_resume(struct device *dev) | |
| { | |
| struct d40_base *base = dev_get_drvdata(dev); | |
| int ret = 0; | |
| if (base->lcpa_regulator) { | |
| ret = regulator_enable(base->lcpa_regulator); | |
| if (ret) | |
| return ret; | |
| } | |
| return pm_runtime_force_resume(dev); | |
| } | |
| #endif | |
| #ifdef CONFIG_PM | |
| static void dma40_backup(void __iomem *baseaddr, u32 *backup, | |
| u32 *regaddr, int num, bool save) | |
| { | |
| int i; | |
| for (i = 0; i < num; i++) { | |
| void __iomem *addr = baseaddr + regaddr[i]; | |
| if (save) | |
| backup[i] = readl_relaxed(addr); | |
| else | |
| writel_relaxed(backup[i], addr); | |
| } | |
| } | |
| static void d40_save_restore_registers(struct d40_base *base, bool save) | |
| { | |
| int i; | |
| /* Save/Restore channel specific registers */ | |
| for (i = 0; i < base->num_phy_chans; i++) { | |
| void __iomem *addr; | |
| int idx; | |
| if (base->phy_res[i].reserved) | |
| continue; | |
| addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA; | |
| idx = i * ARRAY_SIZE(d40_backup_regs_chan); | |
| dma40_backup(addr, &base->reg_val_backup_chan[idx], | |
| d40_backup_regs_chan, | |
| ARRAY_SIZE(d40_backup_regs_chan), | |
| save); | |
| } | |
| /* Save/Restore global registers */ | |
| dma40_backup(base->virtbase, base->reg_val_backup, | |
| d40_backup_regs, ARRAY_SIZE(d40_backup_regs), | |
| save); | |
| /* Save/Restore registers only existing on dma40 v3 and later */ | |
| if (base->gen_dmac.backup) | |
| dma40_backup(base->virtbase, base->reg_val_backup_v4, | |
| base->gen_dmac.backup, | |
| base->gen_dmac.backup_size, | |
| save); | |
| } | |
| static int dma40_runtime_suspend(struct device *dev) | |
| { | |
| struct d40_base *base = dev_get_drvdata(dev); | |
| d40_save_restore_registers(base, true); | |
| /* Don't disable/enable clocks for v1 due to HW bugs */ | |
| if (base->rev != 1) | |
| writel_relaxed(base->gcc_pwr_off_mask, | |
| base->virtbase + D40_DREG_GCC); | |
| return 0; | |
| } | |
| static int dma40_runtime_resume(struct device *dev) | |
| { | |
| struct d40_base *base = dev_get_drvdata(dev); | |
| d40_save_restore_registers(base, false); | |
| writel_relaxed(D40_DREG_GCC_ENABLE_ALL, | |
| base->virtbase + D40_DREG_GCC); | |
| return 0; | |
| } | |
| #endif | |
| static const struct dev_pm_ops dma40_pm_ops = { | |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume) | |
| SET_RUNTIME_PM_OPS(dma40_runtime_suspend, | |
| dma40_runtime_resume, | |
| NULL) | |
| }; | |
| /* Initialization functions. */ | |
| static int __init d40_phy_res_init(struct d40_base *base) | |
| { | |
| int i; | |
| int num_phy_chans_avail = 0; | |
| u32 val[2]; | |
| int odd_even_bit = -2; | |
| int gcc = D40_DREG_GCC_ENA; | |
| val[0] = readl(base->virtbase + D40_DREG_PRSME); | |
| val[1] = readl(base->virtbase + D40_DREG_PRSMO); | |
| for (i = 0; i < base->num_phy_chans; i++) { | |
| base->phy_res[i].num = i; | |
| odd_even_bit += 2 * ((i % 2) == 0); | |
| if (((val[i % 2] >> odd_even_bit) & 3) == 1) { | |
| /* Mark security only channels as occupied */ | |
| base->phy_res[i].allocated_src = D40_ALLOC_PHY; | |
| base->phy_res[i].allocated_dst = D40_ALLOC_PHY; | |
| base->phy_res[i].reserved = true; | |
| gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i), | |
| D40_DREG_GCC_SRC); | |
| gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i), | |
| D40_DREG_GCC_DST); | |
| } else { | |
| base->phy_res[i].allocated_src = D40_ALLOC_FREE; | |
| base->phy_res[i].allocated_dst = D40_ALLOC_FREE; | |
| base->phy_res[i].reserved = false; | |
| num_phy_chans_avail++; | |
| } | |
| spin_lock_init(&base->phy_res[i].lock); | |
| } | |
| /* Mark disabled channels as occupied */ | |
| for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) { | |
| int chan = base->plat_data->disabled_channels[i]; | |
| base->phy_res[chan].allocated_src = D40_ALLOC_PHY; | |
| base->phy_res[chan].allocated_dst = D40_ALLOC_PHY; | |
| base->phy_res[chan].reserved = true; | |
| gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan), | |
| D40_DREG_GCC_SRC); | |
| gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan), | |
| D40_DREG_GCC_DST); | |
| num_phy_chans_avail--; | |
| } | |
| /* Mark soft_lli channels */ | |
| for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) { | |
| int chan = base->plat_data->soft_lli_chans[i]; | |
| base->phy_res[chan].use_soft_lli = true; | |
| } | |
| dev_info(base->dev, "%d of %d physical DMA channels available\n", | |
| num_phy_chans_avail, base->num_phy_chans); | |
| /* Verify settings extended vs standard */ | |
| val[0] = readl(base->virtbase + D40_DREG_PRTYP); | |
| for (i = 0; i < base->num_phy_chans; i++) { | |
| if (base->phy_res[i].allocated_src == D40_ALLOC_FREE && | |
| (val[0] & 0x3) != 1) | |
| dev_info(base->dev, | |
| "[%s] INFO: channel %d is misconfigured (%d)\n", | |
| __func__, i, val[0] & 0x3); | |
| val[0] = val[0] >> 2; | |
| } | |
| /* | |
| * To keep things simple, Enable all clocks initially. | |
| * The clocks will get managed later post channel allocation. | |
| * The clocks for the event lines on which reserved channels exists | |
| * are not managed here. | |
| */ | |
| writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); | |
| base->gcc_pwr_off_mask = gcc; | |
| return num_phy_chans_avail; | |
| } | |
| static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) | |
| { | |
| struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev); | |
| struct clk *clk; | |
| void __iomem *virtbase; | |
| struct resource *res; | |
| struct d40_base *base; | |
| int num_log_chans; | |
| int num_phy_chans; | |
| int num_memcpy_chans; | |
| int clk_ret = -EINVAL; | |
| int i; | |
| u32 pid; | |
| u32 cid; | |
| u8 rev; | |
| clk = clk_get(&pdev->dev, NULL); | |
| if (IS_ERR(clk)) { | |
| d40_err(&pdev->dev, "No matching clock found\n"); | |
| goto check_prepare_enabled; | |
| } | |
| clk_ret = clk_prepare_enable(clk); | |
| if (clk_ret) { | |
| d40_err(&pdev->dev, "Failed to prepare/enable clock\n"); | |
| goto disable_unprepare; | |
| } | |
| /* Get IO for DMAC base address */ | |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base"); | |
| if (!res) | |
| goto disable_unprepare; | |
| if (request_mem_region(res->start, resource_size(res), | |
| D40_NAME " I/O base") == NULL) | |
| goto release_region; | |
| virtbase = ioremap(res->start, resource_size(res)); | |
| if (!virtbase) | |
| goto release_region; | |
| /* This is just a regular AMBA PrimeCell ID actually */ | |
| for (pid = 0, i = 0; i < 4; i++) | |
| pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i) | |
| & 255) << (i * 8); | |
| for (cid = 0, i = 0; i < 4; i++) | |
| cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i) | |
| & 255) << (i * 8); | |
| if (cid != AMBA_CID) { | |
| d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n"); | |
| goto unmap_io; | |
| } | |
| if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) { | |
| d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n", | |
| AMBA_MANF_BITS(pid), | |
| AMBA_VENDOR_ST); | |
| goto unmap_io; | |
| } | |
| /* | |
| * HW revision: | |
| * DB8500ed has revision 0 | |
| * ? has revision 1 | |
| * DB8500v1 has revision 2 | |
| * DB8500v2 has revision 3 | |
| * AP9540v1 has revision 4 | |
| * DB8540v1 has revision 4 | |
| */ | |
| rev = AMBA_REV_BITS(pid); | |
| if (rev < 2) { | |
| d40_err(&pdev->dev, "hardware revision: %d is not supported", rev); | |
| goto unmap_io; | |
| } | |
| /* The number of physical channels on this HW */ | |
| if (plat_data->num_of_phy_chans) | |
| num_phy_chans = plat_data->num_of_phy_chans; | |
| else | |
| num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4; | |
| /* The number of channels used for memcpy */ | |
| if (plat_data->num_of_memcpy_chans) | |
| num_memcpy_chans = plat_data->num_of_memcpy_chans; | |
| else | |
| num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels); | |
| num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY; | |
| dev_info(&pdev->dev, | |
| "hardware rev: %d @ %pa with %d physical and %d logical channels\n", | |
| rev, &res->start, num_phy_chans, num_log_chans); | |
| base = kzalloc(ALIGN(sizeof(struct d40_base), 4) + | |
| (num_phy_chans + num_log_chans + num_memcpy_chans) * | |
| sizeof(struct d40_chan), GFP_KERNEL); | |
| if (base == NULL) | |
| goto unmap_io; | |
| base->rev = rev; | |
| base->clk = clk; | |
| base->num_memcpy_chans = num_memcpy_chans; | |
| base->num_phy_chans = num_phy_chans; | |
| base->num_log_chans = num_log_chans; | |
| base->phy_start = res->start; | |
| base->phy_size = resource_size(res); | |
| base->virtbase = virtbase; | |
| base->plat_data = plat_data; | |
| base->dev = &pdev->dev; | |
| base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4); | |
| base->log_chans = &base->phy_chans[num_phy_chans]; | |
| if (base->plat_data->num_of_phy_chans == 14) { | |
| base->gen_dmac.backup = d40_backup_regs_v4b; | |
| base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B; | |
| base->gen_dmac.interrupt_en = D40_DREG_CPCMIS; | |
| base->gen_dmac.interrupt_clear = D40_DREG_CPCICR; | |
| base->gen_dmac.realtime_en = D40_DREG_CRSEG1; | |
| base->gen_dmac.realtime_clear = D40_DREG_CRCEG1; | |
| base->gen_dmac.high_prio_en = D40_DREG_CPSEG1; | |
| base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1; | |
| base->gen_dmac.il = il_v4b; | |
| base->gen_dmac.il_size = ARRAY_SIZE(il_v4b); | |
| base->gen_dmac.init_reg = dma_init_reg_v4b; | |
| base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b); | |
| } else { | |
| if (base->rev >= 3) { | |
| base->gen_dmac.backup = d40_backup_regs_v4a; | |
| base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A; | |
| } | |
| base->gen_dmac.interrupt_en = D40_DREG_PCMIS; | |
| base->gen_dmac.interrupt_clear = D40_DREG_PCICR; | |
| base->gen_dmac.realtime_en = D40_DREG_RSEG1; | |
| base->gen_dmac.realtime_clear = D40_DREG_RCEG1; | |
| base->gen_dmac.high_prio_en = D40_DREG_PSEG1; | |
| base->gen_dmac.high_prio_clear = D40_DREG_PCEG1; | |
| base->gen_dmac.il = il_v4a; | |
| base->gen_dmac.il_size = ARRAY_SIZE(il_v4a); | |
| base->gen_dmac.init_reg = dma_init_reg_v4a; | |
| base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a); | |
| } | |
| base->phy_res = kcalloc(num_phy_chans, | |
| sizeof(*base->phy_res), | |
| GFP_KERNEL); | |
| if (!base->phy_res) | |
| goto free_base; | |
| base->lookup_phy_chans = kcalloc(num_phy_chans, | |
| sizeof(*base->lookup_phy_chans), | |
| GFP_KERNEL); | |
| if (!base->lookup_phy_chans) | |
| goto free_phy_res; | |
| base->lookup_log_chans = kcalloc(num_log_chans, | |
| sizeof(*base->lookup_log_chans), | |
| GFP_KERNEL); | |
| if (!base->lookup_log_chans) | |
| goto free_phy_chans; | |
| base->reg_val_backup_chan = kmalloc_array(base->num_phy_chans, | |
| sizeof(d40_backup_regs_chan), | |
| GFP_KERNEL); | |
| if (!base->reg_val_backup_chan) | |
| goto free_log_chans; | |
| base->lcla_pool.alloc_map = kcalloc(num_phy_chans | |
| * D40_LCLA_LINK_PER_EVENT_GRP, | |
| sizeof(*base->lcla_pool.alloc_map), | |
| GFP_KERNEL); | |
| if (!base->lcla_pool.alloc_map) | |
| goto free_backup_chan; | |
| base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc), | |
| 0, SLAB_HWCACHE_ALIGN, | |
| NULL); | |
| if (base->desc_slab == NULL) | |
| goto free_map; | |
| return base; | |
| free_map: | |
| kfree(base->lcla_pool.alloc_map); | |
| free_backup_chan: | |
| kfree(base->reg_val_backup_chan); | |
| free_log_chans: | |
| kfree(base->lookup_log_chans); | |
| free_phy_chans: | |
| kfree(base->lookup_phy_chans); | |
| free_phy_res: | |
| kfree(base->phy_res); | |
| free_base: | |
| kfree(base); | |
| unmap_io: | |
| iounmap(virtbase); | |
| release_region: | |
| release_mem_region(res->start, resource_size(res)); | |
| check_prepare_enabled: | |
| if (!clk_ret) | |
| disable_unprepare: | |
| clk_disable_unprepare(clk); | |
| if (!IS_ERR(clk)) | |
| clk_put(clk); | |
| return NULL; | |
| } | |
| static void __init d40_hw_init(struct d40_base *base) | |
| { | |
| int i; | |
| u32 prmseo[2] = {0, 0}; | |
| u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF}; | |
| u32 pcmis = 0; | |
| u32 pcicr = 0; | |
| struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg; | |
| u32 reg_size = base->gen_dmac.init_reg_size; | |
| for (i = 0; i < reg_size; i++) | |
| writel(dma_init_reg[i].val, | |
| base->virtbase + dma_init_reg[i].reg); | |
| /* Configure all our dma channels to default settings */ | |
| for (i = 0; i < base->num_phy_chans; i++) { | |
| activeo[i % 2] = activeo[i % 2] << 2; | |
| if (base->phy_res[base->num_phy_chans - i - 1].allocated_src | |
| == D40_ALLOC_PHY) { | |
| activeo[i % 2] |= 3; | |
| continue; | |
| } | |
| /* Enable interrupt # */ | |
| pcmis = (pcmis << 1) | 1; | |
| /* Clear interrupt # */ | |
| pcicr = (pcicr << 1) | 1; | |
| /* Set channel to physical mode */ | |
| prmseo[i % 2] = prmseo[i % 2] << 2; | |
| prmseo[i % 2] |= 1; | |
| } | |
| writel(prmseo[1], base->virtbase + D40_DREG_PRMSE); | |
| writel(prmseo[0], base->virtbase + D40_DREG_PRMSO); | |
| writel(activeo[1], base->virtbase + D40_DREG_ACTIVE); | |
| writel(activeo[0], base->virtbase + D40_DREG_ACTIVO); | |
| /* Write which interrupt to enable */ | |
| writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en); | |
| /* Write which interrupt to clear */ | |
| writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear); | |
| /* These are __initdata and cannot be accessed after init */ | |
| base->gen_dmac.init_reg = NULL; | |
| base->gen_dmac.init_reg_size = 0; | |
| } | |
| static int __init d40_lcla_allocate(struct d40_base *base) | |
| { | |
| struct d40_lcla_pool *pool = &base->lcla_pool; | |
| unsigned long *page_list; | |
| int i, j; | |
| int ret; | |
| /* | |
| * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned, | |
| * To full fill this hardware requirement without wasting 256 kb | |
| * we allocate pages until we get an aligned one. | |
| */ | |
| page_list = kmalloc_array(MAX_LCLA_ALLOC_ATTEMPTS, | |
| sizeof(*page_list), | |
| GFP_KERNEL); | |
| if (!page_list) | |
| return -ENOMEM; | |
| /* Calculating how many pages that are required */ | |
| base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE; | |
| for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) { | |
| page_list[i] = __get_free_pages(GFP_KERNEL, | |
| base->lcla_pool.pages); | |
| if (!page_list[i]) { | |
| d40_err(base->dev, "Failed to allocate %d pages.\n", | |
| base->lcla_pool.pages); | |
| ret = -ENOMEM; | |
| for (j = 0; j < i; j++) | |
| free_pages(page_list[j], base->lcla_pool.pages); | |
| goto free_page_list; | |
| } | |
| if ((virt_to_phys((void *)page_list[i]) & | |
| (LCLA_ALIGNMENT - 1)) == 0) | |
| break; | |
| } | |
| for (j = 0; j < i; j++) | |
| free_pages(page_list[j], base->lcla_pool.pages); | |
| if (i < MAX_LCLA_ALLOC_ATTEMPTS) { | |
| base->lcla_pool.base = (void *)page_list[i]; | |
| } else { | |
| /* | |
| * After many attempts and no succees with finding the correct | |
| * alignment, try with allocating a big buffer. | |
| */ | |
| dev_warn(base->dev, | |
| "[%s] Failed to get %d pages @ 18 bit align.\n", | |
| __func__, base->lcla_pool.pages); | |
| base->lcla_pool.base_unaligned = kmalloc(SZ_1K * | |
| base->num_phy_chans + | |
| LCLA_ALIGNMENT, | |
| GFP_KERNEL); | |
| if (!base->lcla_pool.base_unaligned) { | |
| ret = -ENOMEM; | |
| goto free_page_list; | |
| } | |
| base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned, | |
| LCLA_ALIGNMENT); | |
| } | |
| pool->dma_addr = dma_map_single(base->dev, pool->base, | |
| SZ_1K * base->num_phy_chans, | |
| DMA_TO_DEVICE); | |
| if (dma_mapping_error(base->dev, pool->dma_addr)) { | |
| pool->dma_addr = 0; | |
| ret = -ENOMEM; | |
| goto free_page_list; | |
| } | |
| writel(virt_to_phys(base->lcla_pool.base), | |
| base->virtbase + D40_DREG_LCLA); | |
| ret = 0; | |
| free_page_list: | |
| kfree(page_list); | |
| return ret; | |
| } | |
| static int __init d40_of_probe(struct platform_device *pdev, | |
| struct device_node *np) | |
| { | |
| struct stedma40_platform_data *pdata; | |
| int num_phy = 0, num_memcpy = 0, num_disabled = 0; | |
| const __be32 *list; | |
| pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); | |
| if (!pdata) | |
| return -ENOMEM; | |
| /* If absent this value will be obtained from h/w. */ | |
| of_property_read_u32(np, "dma-channels", &num_phy); | |
| if (num_phy > 0) | |
| pdata->num_of_phy_chans = num_phy; | |
| list = of_get_property(np, "memcpy-channels", &num_memcpy); | |
| num_memcpy /= sizeof(*list); | |
| if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) { | |
| d40_err(&pdev->dev, | |
| "Invalid number of memcpy channels specified (%d)\n", | |
| num_memcpy); | |
| return -EINVAL; | |
| } | |
| pdata->num_of_memcpy_chans = num_memcpy; | |
| of_property_read_u32_array(np, "memcpy-channels", | |
| dma40_memcpy_channels, | |
| num_memcpy); | |
| list = of_get_property(np, "disabled-channels", &num_disabled); | |
| num_disabled /= sizeof(*list); | |
| if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) { | |
| d40_err(&pdev->dev, | |
| "Invalid number of disabled channels specified (%d)\n", | |
| num_disabled); | |
| return -EINVAL; | |
| } | |
| of_property_read_u32_array(np, "disabled-channels", | |
| pdata->disabled_channels, | |
| num_disabled); | |
| pdata->disabled_channels[num_disabled] = -1; | |
| pdev->dev.platform_data = pdata; | |
| return 0; | |
| } | |
| static int __init d40_probe(struct platform_device *pdev) | |
| { | |
| struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev); | |
| struct device_node *np = pdev->dev.of_node; | |
| int ret = -ENOENT; | |
| struct d40_base *base; | |
| struct resource *res; | |
| int num_reserved_chans; | |
| u32 val; | |
| if (!plat_data) { | |
| if (np) { | |
| if (d40_of_probe(pdev, np)) { | |
| ret = -ENOMEM; | |
| goto report_failure; | |
| } | |
| } else { | |
| d40_err(&pdev->dev, "No pdata or Device Tree provided\n"); | |
| goto report_failure; | |
| } | |
| } | |
| base = d40_hw_detect_init(pdev); | |
| if (!base) | |
| goto report_failure; | |
| num_reserved_chans = d40_phy_res_init(base); | |
| platform_set_drvdata(pdev, base); | |
| spin_lock_init(&base->interrupt_lock); | |
| spin_lock_init(&base->execmd_lock); | |
| /* Get IO for logical channel parameter address */ | |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcpa"); | |
| if (!res) { | |
| ret = -ENOENT; | |
| d40_err(&pdev->dev, "No \"lcpa\" memory resource\n"); | |
| goto destroy_cache; | |
| } | |
| base->lcpa_size = resource_size(res); | |
| base->phy_lcpa = res->start; | |
| if (request_mem_region(res->start, resource_size(res), | |
| D40_NAME " I/O lcpa") == NULL) { | |
| ret = -EBUSY; | |
| d40_err(&pdev->dev, "Failed to request LCPA region %pR\n", res); | |
| goto destroy_cache; | |
| } | |
| /* We make use of ESRAM memory for this. */ | |
| val = readl(base->virtbase + D40_DREG_LCPA); | |
| if (res->start != val && val != 0) { | |
| dev_warn(&pdev->dev, | |
| "[%s] Mismatch LCPA dma 0x%x, def %pa\n", | |
| __func__, val, &res->start); | |
| } else | |
| writel(res->start, base->virtbase + D40_DREG_LCPA); | |
| base->lcpa_base = ioremap(res->start, resource_size(res)); | |
| if (!base->lcpa_base) { | |
| ret = -ENOMEM; | |
| d40_err(&pdev->dev, "Failed to ioremap LCPA region\n"); | |
| goto destroy_cache; | |
| } | |
| /* If lcla has to be located in ESRAM we don't need to allocate */ | |
| if (base->plat_data->use_esram_lcla) { | |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, | |
| "lcla_esram"); | |
| if (!res) { | |
| ret = -ENOENT; | |
| d40_err(&pdev->dev, | |
| "No \"lcla_esram\" memory resource\n"); | |
| goto destroy_cache; | |
| } | |
| base->lcla_pool.base = ioremap(res->start, | |
| resource_size(res)); | |
| if (!base->lcla_pool.base) { | |
| ret = -ENOMEM; | |
| d40_err(&pdev->dev, "Failed to ioremap LCLA region\n"); | |
| goto destroy_cache; | |
| } | |
| writel(res->start, base->virtbase + D40_DREG_LCLA); | |
| } else { | |
| ret = d40_lcla_allocate(base); | |
| if (ret) { | |
| d40_err(&pdev->dev, "Failed to allocate LCLA area\n"); | |
| goto destroy_cache; | |
| } | |
| } | |
| spin_lock_init(&base->lcla_pool.lock); | |
| base->irq = platform_get_irq(pdev, 0); | |
| ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base); | |
| if (ret) { | |
| d40_err(&pdev->dev, "No IRQ defined\n"); | |
| goto destroy_cache; | |
| } | |
| if (base->plat_data->use_esram_lcla) { | |
| base->lcpa_regulator = regulator_get(base->dev, "lcla_esram"); | |
| if (IS_ERR(base->lcpa_regulator)) { | |
| d40_err(&pdev->dev, "Failed to get lcpa_regulator\n"); | |
| ret = PTR_ERR(base->lcpa_regulator); | |
| base->lcpa_regulator = NULL; | |
| goto destroy_cache; | |
| } | |
| ret = regulator_enable(base->lcpa_regulator); | |
| if (ret) { | |
| d40_err(&pdev->dev, | |
| "Failed to enable lcpa_regulator\n"); | |
| regulator_put(base->lcpa_regulator); | |
| base->lcpa_regulator = NULL; | |
| goto destroy_cache; | |
| } | |
| } | |
| writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC); | |
| pm_runtime_irq_safe(base->dev); | |
| pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY); | |
| pm_runtime_use_autosuspend(base->dev); | |
| pm_runtime_mark_last_busy(base->dev); | |
| pm_runtime_set_active(base->dev); | |
| pm_runtime_enable(base->dev); | |
| ret = d40_dmaengine_init(base, num_reserved_chans); | |
| if (ret) | |
| goto destroy_cache; | |
| base->dev->dma_parms = &base->dma_parms; | |
| ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE); | |
| if (ret) { | |
| d40_err(&pdev->dev, "Failed to set dma max seg size\n"); | |
| goto destroy_cache; | |
| } | |
| d40_hw_init(base); | |
| if (np) { | |
| ret = of_dma_controller_register(np, d40_xlate, NULL); | |
| if (ret) | |
| dev_err(&pdev->dev, | |
| "could not register of_dma_controller\n"); | |
| } | |
| dev_info(base->dev, "initialized\n"); | |
| return 0; | |
| destroy_cache: | |
| kmem_cache_destroy(base->desc_slab); | |
| if (base->virtbase) | |
| iounmap(base->virtbase); | |
| if (base->lcla_pool.base && base->plat_data->use_esram_lcla) { | |
| iounmap(base->lcla_pool.base); | |
| base->lcla_pool.base = NULL; | |
| } | |
| if (base->lcla_pool.dma_addr) | |
| dma_unmap_single(base->dev, base->lcla_pool.dma_addr, | |
| SZ_1K * base->num_phy_chans, | |
| DMA_TO_DEVICE); | |
| if (!base->lcla_pool.base_unaligned && base->lcla_pool.base) | |
| free_pages((unsigned long)base->lcla_pool.base, | |
| base->lcla_pool.pages); | |
| kfree(base->lcla_pool.base_unaligned); | |
| if (base->phy_lcpa) | |
| release_mem_region(base->phy_lcpa, | |
| base->lcpa_size); | |
| if (base->phy_start) | |
| release_mem_region(base->phy_start, | |
| base->phy_size); | |
| if (base->clk) { | |
| clk_disable_unprepare(base->clk); | |
| clk_put(base->clk); | |
| } | |
| if (base->lcpa_regulator) { | |
| regulator_disable(base->lcpa_regulator); | |
| regulator_put(base->lcpa_regulator); | |
| } | |
| kfree(base->lcla_pool.alloc_map); | |
| kfree(base->lookup_log_chans); | |
| kfree(base->lookup_phy_chans); | |
| kfree(base->phy_res); | |
| kfree(base); | |
| report_failure: | |
| d40_err(&pdev->dev, "probe failed\n"); | |
| return ret; | |
| } | |
| static const struct of_device_id d40_match[] = { | |
| { .compatible = "stericsson,dma40", }, | |
| {} | |
| }; | |
| static struct platform_driver d40_driver = { | |
| .driver = { | |
| .name = D40_NAME, | |
| .pm = &dma40_pm_ops, | |
| .of_match_table = d40_match, | |
| }, | |
| }; | |
| static int __init stedma40_init(void) | |
| { | |
| return platform_driver_probe(&d40_driver, d40_probe); | |
| } | |
| subsys_initcall(stedma40_init); |