drivers/mtd/devices/m25p80.c - third_party/linux - Git at Google

 /*
  * MTD SPI driver for ST M25Pxx (and similar) serial flash chips
  *
  * Author: Mike Lavender, mike@steroidmicros.com
  *
  * Copyright (c) 2005, Intec Automation Inc.
  *
  * Some parts are based on lart.c by Abraham Van Der Merwe
  *
  * Cleaned up and generalized based on mtd_dataflash.c
  *
  * This code is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  */

 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/module.h>
 #include <linux/device.h>

 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>

 #include <linux/spi/spi.h>
 #include <linux/spi/spi-mem.h>
 #include <linux/spi/flash.h>
 #include <linux/mtd/spi-nor.h>

 #define	MAX_CMD_SIZE		6
 struct m25p {
 	struct spi_mem		*spimem;
 	struct spi_nor		spi_nor;
 	u8			command[MAX_CMD_SIZE];
 };

 static int m25p80_read_reg(struct spi_nor *nor, u8 code, u8 *val, int len)
 {
 	struct m25p *flash = nor->priv;
 	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1),
 					  SPI_MEM_OP_NO_ADDR,
 					  SPI_MEM_OP_NO_DUMMY,
 					  SPI_MEM_OP_DATA_IN(len, val, 1));
 	int ret;

 	ret = spi_mem_exec_op(flash->spimem, &op);
 	if (ret < 0)
 		dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret,
 			code);

 	return ret;
 }

 static int m25p80_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
 {
 	struct m25p *flash = nor->priv;
 	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1),
 					  SPI_MEM_OP_NO_ADDR,
 					  SPI_MEM_OP_NO_DUMMY,
 					  SPI_MEM_OP_DATA_OUT(len, buf, 1));

 	return spi_mem_exec_op(flash->spimem, &op);
 }

 static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
 			    const u_char *buf)
 {
 	struct m25p *flash = nor->priv;
 	struct spi_mem_op op =
 			SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
 				   SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
 				   SPI_MEM_OP_DUMMY(0, 1),
 				   SPI_MEM_OP_DATA_OUT(len, buf, 1));
 	size_t remaining = len;
 	int ret;

 	/* get transfer protocols. */
 	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
 	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
 	op.dummy.buswidth = op.addr.buswidth;
 	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);

 	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
 		op.addr.nbytes = 0;

 	while (remaining) {
 		op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
 		ret = spi_mem_adjust_op_size(flash->spimem, &op);
 		if (ret)
 			return ret;

 		ret = spi_mem_exec_op(flash->spimem, &op);
 		if (ret)
 			return ret;

 		op.addr.val += op.data.nbytes;
 		remaining -= op.data.nbytes;
 		op.data.buf.out += op.data.nbytes;
 	}

 	return len;
 }

 /*
  * Read an address range from the nor chip.  The address range
  * may be any size provided it is within the physical boundaries.
  */
 static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
 			   u_char *buf)
 {
 	struct m25p *flash = nor->priv;
 	struct spi_mem_op op =
 			SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
 				   SPI_MEM_OP_ADDR(nor->addr_width, from, 1),
 				   SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
 				   SPI_MEM_OP_DATA_IN(len, buf, 1));
 	size_t remaining = len;
 	int ret;

 	/* get transfer protocols. */
 	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
 	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
 	op.dummy.buswidth = op.addr.buswidth;
 	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);

 	/* convert the dummy cycles to the number of bytes */
 	op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;

 	while (remaining) {
 		op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
 		ret = spi_mem_adjust_op_size(flash->spimem, &op);
 		if (ret)
 			return ret;

 		ret = spi_mem_exec_op(flash->spimem, &op);
 		if (ret)
 			return ret;

 		op.addr.val += op.data.nbytes;
 		remaining -= op.data.nbytes;
 		op.data.buf.in += op.data.nbytes;
 	}

 	return len;
 }

 /*
  * board specific setup should have ensured the SPI clock used here
  * matches what the READ command supports, at least until this driver
  * understands FAST_READ (for clocks over 25 MHz).
  */
 static int m25p_probe(struct spi_mem *spimem)
 {
 	struct spi_device *spi = spimem->spi;
 	struct flash_platform_data	*data;
 	struct m25p *flash;
 	struct spi_nor *nor;
 	struct spi_nor_hwcaps hwcaps = {
 		.mask = SNOR_HWCAPS_READ |
 			SNOR_HWCAPS_READ_FAST |
 			SNOR_HWCAPS_PP,
 	};
 	char *flash_name;
 	int ret;

 	data = dev_get_platdata(&spimem->spi->dev);

 	flash = devm_kzalloc(&spimem->spi->dev, sizeof(*flash), GFP_KERNEL);
 	if (!flash)
 		return -ENOMEM;

 	nor = &flash->spi_nor;

 	/* install the hooks */
 	nor->read = m25p80_read;
 	nor->write = m25p80_write;
 	nor->write_reg = m25p80_write_reg;
 	nor->read_reg = m25p80_read_reg;

 	nor->dev = &spimem->spi->dev;
 	spi_nor_set_flash_node(nor, spi->dev.of_node);
 	nor->priv = flash;

 	spi_mem_set_drvdata(spimem, flash);
 	flash->spimem = spimem;

 	if (spi->mode & SPI_RX_QUAD) {
 		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_4;

 		if (spi->mode & SPI_TX_QUAD)
 			hwcaps.mask |= (SNOR_HWCAPS_READ_1_4_4 |
 					SNOR_HWCAPS_PP_1_1_4 |
 					SNOR_HWCAPS_PP_1_4_4);
 	} else if (spi->mode & SPI_RX_DUAL) {
 		hwcaps.mask |= SNOR_HWCAPS_READ_1_1_2;

 		if (spi->mode & SPI_TX_DUAL)
 			hwcaps.mask |= SNOR_HWCAPS_READ_1_2_2;
 	}

 	if (data && data->name)
 		nor->mtd.name = data->name;

 	/* For some (historical?) reason many platforms provide two different
 	 * names in flash_platform_data: "name" and "type". Quite often name is
 	 * set to "m25p80" and then "type" provides a real chip name.
 	 * If that's the case, respect "type" and ignore a "name".
 	 */
 	if (data && data->type)
 		flash_name = data->type;
 	else if (!strcmp(spi->modalias, "spi-nor"))
 		flash_name = NULL; /* auto-detect */
 	else
 		flash_name = spi->modalias;

 	ret = spi_nor_scan(nor, flash_name, &hwcaps);
 	if (ret)
 		return ret;

 	return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
 				   data ? data->nr_parts : 0);
 }


 static int m25p_remove(struct spi_mem *spimem)
 {
 	struct m25p	*flash = spi_mem_get_drvdata(spimem);

 	spi_nor_restore(&flash->spi_nor);

 	/* Clean up MTD stuff. */
 	return mtd_device_unregister(&flash->spi_nor.mtd);
 }

 static void m25p_shutdown(struct spi_mem *spimem)
 {
 	struct m25p *flash = spi_mem_get_drvdata(spimem);

 	spi_nor_restore(&flash->spi_nor);
 }
 /*
  * Do NOT add to this array without reading the following:
  *
  * Historically, many flash devices are bound to this driver by their name. But
  * since most of these flash are compatible to some extent, and their
  * differences can often be differentiated by the JEDEC read-ID command, we
  * encourage new users to add support to the spi-nor library, and simply bind
  * against a generic string here (e.g., "jedec,spi-nor").
  *
  * Many flash names are kept here in this list (as well as in spi-nor.c) to
  * keep them available as module aliases for existing platforms.
  */
 static const struct spi_device_id m25p_ids[] = {
 	/*
 	 * Allow non-DT platform devices to bind to the "spi-nor" modalias, and
 	 * hack around the fact that the SPI core does not provide uevent
 	 * matching for .of_match_table
 	 */
 	{"spi-nor"},

 	/*
 	 * Entries not used in DTs that should be safe to drop after replacing
 	 * them with "spi-nor" in platform data.
 	 */
 	{"s25sl064a"},	{"w25x16"},	{"m25p10"},	{"m25px64"},

 	/*
 	 * Entries that were used in DTs without "jedec,spi-nor" fallback and
 	 * should be kept for backward compatibility.
 	 */
 	{"at25df321a"},	{"at25df641"},	{"at26df081a"},
 	{"mx25l4005a"},	{"mx25l1606e"},	{"mx25l6405d"},	{"mx25l12805d"},
 	{"mx25l25635e"},{"mx66l51235l"},
 	{"n25q064"},	{"n25q128a11"},	{"n25q128a13"},	{"n25q512a"},
 	{"s25fl256s1"},	{"s25fl512s"},	{"s25sl12801"},	{"s25fl008k"},
 	{"s25fl064k"},
 	{"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
 	{"m25p40"},	{"m25p80"},	{"m25p16"},	{"m25p32"},
 	{"m25p64"},	{"m25p128"},
 	{"w25x80"},	{"w25x32"},	{"w25q32"},	{"w25q32dw"},
 	{"w25q80bl"},	{"w25q128"},	{"w25q256"},

 	/* Flashes that can't be detected using JEDEC */
 	{"m25p05-nonjedec"},	{"m25p10-nonjedec"},	{"m25p20-nonjedec"},
 	{"m25p40-nonjedec"},	{"m25p80-nonjedec"},	{"m25p16-nonjedec"},
 	{"m25p32-nonjedec"},	{"m25p64-nonjedec"},	{"m25p128-nonjedec"},

 	/* Everspin MRAMs (non-JEDEC) */
 	{ "mr25h128" }, /* 128 Kib, 40 MHz */
 	{ "mr25h256" }, /* 256 Kib, 40 MHz */
 	{ "mr25h10" },  /*   1 Mib, 40 MHz */
 	{ "mr25h40" },  /*   4 Mib, 40 MHz */

 	{ },
 };
 MODULE_DEVICE_TABLE(spi, m25p_ids);

 static const struct of_device_id m25p_of_table[] = {
 	/*
 	 * Generic compatibility for SPI NOR that can be identified by the
 	 * JEDEC READ ID opcode (0x9F). Use this, if possible.
 	 */
 	{ .compatible = "jedec,spi-nor" },
 	{}
 };
 MODULE_DEVICE_TABLE(of, m25p_of_table);

 static struct spi_mem_driver m25p80_driver = {
 	.spidrv = {
 		.driver = {
 			.name	= "m25p80",
 			.of_match_table = m25p_of_table,
 		},
 		.id_table	= m25p_ids,
 	},
 	.probe	= m25p_probe,
 	.remove	= m25p_remove,
 	.shutdown	= m25p_shutdown,

 	/* REVISIT: many of these chips have deep power-down modes, which
 	 * should clearly be entered on suspend() to minimize power use.
 	 * And also when they're otherwise idle...
 	 */
 };

 module_spi_mem_driver(m25p80_driver);

 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Mike Lavender");
 MODULE_DESCRIPTION("MTD SPI driver for ST M25Pxx flash chips");
	/*
	* MTD SPI driver for ST M25Pxx (and similar) serial flash chips
	*
	* Author: Mike Lavender, mike@steroidmicros.com
	*
	* Copyright (c) 2005, Intec Automation Inc.
	*
	* Some parts are based on lart.c by Abraham Van Der Merwe
	*
	* Cleaned up and generalized based on mtd_dataflash.c
	*
	* This code is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	*/

	#include <linux/err.h>
	#include <linux/errno.h>
	#include <linux/module.h>
	#include <linux/device.h>

	#include <linux/mtd/mtd.h>
	#include <linux/mtd/partitions.h>

	#include <linux/spi/spi.h>
	#include <linux/spi/spi-mem.h>
	#include <linux/spi/flash.h>
	#include <linux/mtd/spi-nor.h>

	#define MAX_CMD_SIZE 6
	struct m25p {
	struct spi_mem *spimem;
	struct spi_nor spi_nor;
	u8 command[MAX_CMD_SIZE];
	};

	static int m25p80_read_reg(struct spi_nor nor, u8 code, u8 val, int len)
	{
	struct m25p *flash = nor->priv;
	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(code, 1),
	SPI_MEM_OP_NO_ADDR,
	SPI_MEM_OP_NO_DUMMY,
	SPI_MEM_OP_DATA_IN(len, val, 1));
	int ret;

	ret = spi_mem_exec_op(flash->spimem, &op);
	if (ret < 0)
	dev_err(&flash->spimem->spi->dev, "error %d reading %x\n", ret,
	code);

	return ret;
	}

	static int m25p80_write_reg(struct spi_nor nor, u8 opcode, u8 buf, int len)
	{
	struct m25p *flash = nor->priv;
	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(opcode, 1),
	SPI_MEM_OP_NO_ADDR,
	SPI_MEM_OP_NO_DUMMY,
	SPI_MEM_OP_DATA_OUT(len, buf, 1));

	return spi_mem_exec_op(flash->spimem, &op);
	}

	static ssize_t m25p80_write(struct spi_nor *nor, loff_t to, size_t len,
	const u_char *buf)
	{
	struct m25p *flash = nor->priv;
	struct spi_mem_op op =
	SPI_MEM_OP(SPI_MEM_OP_CMD(nor->program_opcode, 1),
	SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
	SPI_MEM_OP_DUMMY(0, 1),
	SPI_MEM_OP_DATA_OUT(len, buf, 1));
	size_t remaining = len;
	int ret;

	/* get transfer protocols. */
	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto);
	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto);
	op.dummy.buswidth = op.addr.buswidth;
	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto);

	if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second)
	op.addr.nbytes = 0;

	while (remaining) {
	op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
	ret = spi_mem_adjust_op_size(flash->spimem, &op);
	if (ret)
	return ret;

	ret = spi_mem_exec_op(flash->spimem, &op);
	if (ret)
	return ret;

	op.addr.val += op.data.nbytes;
	remaining -= op.data.nbytes;
	op.data.buf.out += op.data.nbytes;
	}

	return len;
	}

	/*
	* Read an address range from the nor chip. The address range
	* may be any size provided it is within the physical boundaries.
	*/
	static ssize_t m25p80_read(struct spi_nor *nor, loff_t from, size_t len,
	u_char *buf)
	{
	struct m25p *flash = nor->priv;
	struct spi_mem_op op =
	SPI_MEM_OP(SPI_MEM_OP_CMD(nor->read_opcode, 1),
	SPI_MEM_OP_ADDR(nor->addr_width, from, 1),
	SPI_MEM_OP_DUMMY(nor->read_dummy, 1),
	SPI_MEM_OP_DATA_IN(len, buf, 1));
	size_t remaining = len;
	int ret;

	/* get transfer protocols. */
	op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto);
	op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto);
	op.dummy.buswidth = op.addr.buswidth;
	op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto);

	/* convert the dummy cycles to the number of bytes */
	op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8;

	while (remaining) {
	op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
	ret = spi_mem_adjust_op_size(flash->spimem, &op);
	if (ret)
	return ret;

	ret = spi_mem_exec_op(flash->spimem, &op);
	if (ret)
	return ret;

	op.addr.val += op.data.nbytes;
	remaining -= op.data.nbytes;
	op.data.buf.in += op.data.nbytes;
	}

	return len;
	}

	/*
	* board specific setup should have ensured the SPI clock used here
	* matches what the READ command supports, at least until this driver
	* understands FAST_READ (for clocks over 25 MHz).
	*/
	static int m25p_probe(struct spi_mem *spimem)
	{
	struct spi_device *spi = spimem->spi;
	struct flash_platform_data *data;
	struct m25p *flash;
	struct spi_nor *nor;
	struct spi_nor_hwcaps hwcaps = {
	.mask = SNOR_HWCAPS_READ \|
	SNOR_HWCAPS_READ_FAST \|
	SNOR_HWCAPS_PP,
	};
	char *flash_name;
	int ret;

	data = dev_get_platdata(&spimem->spi->dev);

	flash = devm_kzalloc(&spimem->spi->dev, sizeof(*flash), GFP_KERNEL);
	if (!flash)
	return -ENOMEM;

	nor = &flash->spi_nor;

	/* install the hooks */
	nor->read = m25p80_read;
	nor->write = m25p80_write;
	nor->write_reg = m25p80_write_reg;
	nor->read_reg = m25p80_read_reg;

	nor->dev = &spimem->spi->dev;
	spi_nor_set_flash_node(nor, spi->dev.of_node);
	nor->priv = flash;

	spi_mem_set_drvdata(spimem, flash);
	flash->spimem = spimem;

	if (spi->mode & SPI_RX_QUAD) {
	hwcaps.mask \|= SNOR_HWCAPS_READ_1_1_4;

	if (spi->mode & SPI_TX_QUAD)
	hwcaps.mask \|= (SNOR_HWCAPS_READ_1_4_4 \|
	SNOR_HWCAPS_PP_1_1_4 \|
	SNOR_HWCAPS_PP_1_4_4);
	} else if (spi->mode & SPI_RX_DUAL) {
	hwcaps.mask \|= SNOR_HWCAPS_READ_1_1_2;

	if (spi->mode & SPI_TX_DUAL)
	hwcaps.mask \|= SNOR_HWCAPS_READ_1_2_2;
	}

	if (data && data->name)
	nor->mtd.name = data->name;

	/* For some (historical?) reason many platforms provide two different
	* names in flash_platform_data: "name" and "type". Quite often name is
	* set to "m25p80" and then "type" provides a real chip name.
	* If that's the case, respect "type" and ignore a "name".
	*/
	if (data && data->type)
	flash_name = data->type;
	else if (!strcmp(spi->modalias, "spi-nor"))
	flash_name = NULL; /* auto-detect */
	else
	flash_name = spi->modalias;

	ret = spi_nor_scan(nor, flash_name, &hwcaps);
	if (ret)
	return ret;

	return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
	data ? data->nr_parts : 0);
	}


	static int m25p_remove(struct spi_mem *spimem)
	{
	struct m25p *flash = spi_mem_get_drvdata(spimem);

	spi_nor_restore(&flash->spi_nor);

	/* Clean up MTD stuff. */
	return mtd_device_unregister(&flash->spi_nor.mtd);
	}

	static void m25p_shutdown(struct spi_mem *spimem)
	{
	struct m25p *flash = spi_mem_get_drvdata(spimem);

	spi_nor_restore(&flash->spi_nor);
	}
	/*
	* Do NOT add to this array without reading the following:
	*
	* Historically, many flash devices are bound to this driver by their name. But
	* since most of these flash are compatible to some extent, and their
	* differences can often be differentiated by the JEDEC read-ID command, we
	* encourage new users to add support to the spi-nor library, and simply bind
	* against a generic string here (e.g., "jedec,spi-nor").
	*
	* Many flash names are kept here in this list (as well as in spi-nor.c) to
	* keep them available as module aliases for existing platforms.
	*/
	static const struct spi_device_id m25p_ids[] = {
	/*
	* Allow non-DT platform devices to bind to the "spi-nor" modalias, and
	* hack around the fact that the SPI core does not provide uevent
	* matching for .of_match_table
	*/
	{"spi-nor"},

	/*
	* Entries not used in DTs that should be safe to drop after replacing
	* them with "spi-nor" in platform data.
	*/
	{"s25sl064a"}, {"w25x16"}, {"m25p10"}, {"m25px64"},

	/*
	* Entries that were used in DTs without "jedec,spi-nor" fallback and
	* should be kept for backward compatibility.
	*/
	{"at25df321a"}, {"at25df641"}, {"at26df081a"},
	{"mx25l4005a"}, {"mx25l1606e"}, {"mx25l6405d"}, {"mx25l12805d"},
	{"mx25l25635e"},{"mx66l51235l"},
	{"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q512a"},
	{"s25fl256s1"}, {"s25fl512s"}, {"s25sl12801"}, {"s25fl008k"},
	{"s25fl064k"},
	{"sst25vf040b"},{"sst25vf016b"},{"sst25vf032b"},{"sst25wf040"},
	{"m25p40"}, {"m25p80"}, {"m25p16"}, {"m25p32"},
	{"m25p64"}, {"m25p128"},
	{"w25x80"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
	{"w25q80bl"}, {"w25q128"}, {"w25q256"},

	/* Flashes that can't be detected using JEDEC */
	{"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"},
	{"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
	{"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},

	/* Everspin MRAMs (non-JEDEC) */
	{ "mr25h128" }, /* 128 Kib, 40 MHz */
	{ "mr25h256" }, /* 256 Kib, 40 MHz */
	{ "mr25h10" }, /* 1 Mib, 40 MHz */
	{ "mr25h40" }, /* 4 Mib, 40 MHz */

	{ },
	};
	MODULE_DEVICE_TABLE(spi, m25p_ids);

	static const struct of_device_id m25p_of_table[] = {
	/*
	* Generic compatibility for SPI NOR that can be identified by the
	* JEDEC READ ID opcode (0x9F). Use this, if possible.
	*/
	{ .compatible = "jedec,spi-nor" },
	{}
	};
	MODULE_DEVICE_TABLE(of, m25p_of_table);

	static struct spi_mem_driver m25p80_driver = {
	.spidrv = {
	.driver = {
	.name = "m25p80",
	.of_match_table = m25p_of_table,
	},
	.id_table = m25p_ids,
	},
	.probe = m25p_probe,
	.remove = m25p_remove,
	.shutdown = m25p_shutdown,

	/* REVISIT: many of these chips have deep power-down modes, which
	* should clearly be entered on suspend() to minimize power use.
	* And also when they're otherwise idle...
	*/
	};

	module_spi_mem_driver(m25p80_driver);

	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Mike Lavender");
	MODULE_DESCRIPTION("MTD SPI driver for ST M25Pxx flash chips");