| /* | 
 |  * File:         sound/soc/blackfin/bf5xx-ssm2602.c | 
 |  * Author:       Cliff Cai <Cliff.Cai@analog.com> | 
 |  * | 
 |  * Created:      Tue June 06 2008 | 
 |  * Description:  board driver for SSM2602 sound chip | 
 |  * | 
 |  * Modified: | 
 |  *               Copyright 2008 Analog Devices Inc. | 
 |  * | 
 |  * Bugs:         Enter bugs at http://blackfin.uclinux.org/ | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  * This program is distributed in the hope that it will be useful, | 
 |  * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
 |  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
 |  * GNU General Public License for more details. | 
 |  * | 
 |  * You should have received a copy of the GNU General Public License | 
 |  * along with this program; if not, see the file COPYING, or write | 
 |  * to the Free Software Foundation, Inc., | 
 |  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/device.h> | 
 |  | 
 | #include <sound/core.h> | 
 | #include <sound/pcm.h> | 
 | #include <sound/soc.h> | 
 | #include <sound/pcm_params.h> | 
 |  | 
 | #include <asm/dma.h> | 
 | #include <asm/portmux.h> | 
 | #include <linux/gpio.h> | 
 | #include "../codecs/ssm2602.h" | 
 | #include "bf5xx-sport.h" | 
 | #include "bf5xx-i2s-pcm.h" | 
 |  | 
 | static struct snd_soc_card bf5xx_ssm2602; | 
 |  | 
 | static int bf5xx_ssm2602_hw_params(struct snd_pcm_substream *substream, | 
 | 	struct snd_pcm_hw_params *params) | 
 | { | 
 | 	struct snd_soc_pcm_runtime *rtd = substream->private_data; | 
 | 	struct snd_soc_dai *codec_dai = rtd->codec_dai; | 
 | 	unsigned int clk = 0; | 
 | 	int ret = 0; | 
 |  | 
 | 	pr_debug("%s rate %d format %x\n", __func__, params_rate(params), | 
 | 		params_format(params)); | 
 | 	/* | 
 | 	 * If you are using a crystal source which frequency is not 12MHz | 
 | 	 * then modify the below case statement with frequency of the crystal. | 
 | 	 * | 
 | 	 * If you are using the SPORT to generate clocking then this is | 
 | 	 * where to do it. | 
 | 	 */ | 
 |  | 
 | 	switch (params_rate(params)) { | 
 | 	case 8000: | 
 | 	case 16000: | 
 | 	case 48000: | 
 | 	case 96000: | 
 | 	case 11025: | 
 | 	case 22050: | 
 | 	case 44100: | 
 | 		clk = 12000000; | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	ret = snd_soc_dai_set_sysclk(codec_dai, SSM2602_SYSCLK, clk, | 
 | 		SND_SOC_CLOCK_IN); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct snd_soc_ops bf5xx_ssm2602_ops = { | 
 | 	.hw_params = bf5xx_ssm2602_hw_params, | 
 | }; | 
 |  | 
 | /* CODEC is master for BCLK and LRC in this configuration. */ | 
 | #define BF5XX_SSM2602_DAIFMT (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | \ | 
 | 				SND_SOC_DAIFMT_CBM_CFM) | 
 |  | 
 | static struct snd_soc_dai_link bf5xx_ssm2602_dai[] = { | 
 | 	{ | 
 | 		.name = "ssm2602", | 
 | 		.stream_name = "SSM2602", | 
 | 		.cpu_dai_name = "bfin-i2s.0", | 
 | 		.codec_dai_name = "ssm2602-hifi", | 
 | 		.platform_name = "bfin-i2s-pcm-audio", | 
 | 		.codec_name = "ssm2602.0-001b", | 
 | 		.ops = &bf5xx_ssm2602_ops, | 
 | 	}, | 
 | 	{ | 
 | 		.name = "ssm2602", | 
 | 		.stream_name = "SSM2602", | 
 | 		.cpu_dai_name = "bfin-i2s.1", | 
 | 		.codec_dai_name = "ssm2602-hifi", | 
 | 		.platform_name = "bfin-i2s-pcm-audio", | 
 | 		.codec_name = "ssm2602.0-001b", | 
 | 		.ops = &bf5xx_ssm2602_ops, | 
 | 	}, | 
 | }; | 
 |  | 
 | static struct snd_soc_card bf5xx_ssm2602 = { | 
 | 	.name = "bfin-ssm2602", | 
 | 	.owner = THIS_MODULE, | 
 | 	.dai_link = &bf5xx_ssm2602_dai[CONFIG_SND_BF5XX_SPORT_NUM], | 
 | 	.num_links = 1, | 
 | }; | 
 |  | 
 | static struct platform_device *bf5xx_ssm2602_snd_device; | 
 |  | 
 | static int __init bf5xx_ssm2602_init(void) | 
 | { | 
 | 	int ret; | 
 |  | 
 | 	pr_debug("%s enter\n", __func__); | 
 | 	bf5xx_ssm2602_snd_device = platform_device_alloc("soc-audio", -1); | 
 | 	if (!bf5xx_ssm2602_snd_device) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	platform_set_drvdata(bf5xx_ssm2602_snd_device, &bf5xx_ssm2602); | 
 | 	ret = platform_device_add(bf5xx_ssm2602_snd_device); | 
 |  | 
 | 	if (ret) | 
 | 		platform_device_put(bf5xx_ssm2602_snd_device); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void __exit bf5xx_ssm2602_exit(void) | 
 | { | 
 | 	pr_debug("%s enter\n", __func__); | 
 | 	platform_device_unregister(bf5xx_ssm2602_snd_device); | 
 | } | 
 |  | 
 | module_init(bf5xx_ssm2602_init); | 
 | module_exit(bf5xx_ssm2602_exit); | 
 |  | 
 | /* Module information */ | 
 | MODULE_AUTHOR("Cliff Cai"); | 
 | MODULE_DESCRIPTION("ALSA SoC SSM2602 BF527-EZKIT"); | 
 | MODULE_LICENSE("GPL"); | 
 |  |