| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> | |
| * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> | |
| * Copyright 2013-2014 Intel Mobile Communications GmbH | |
| * Copyright (C) 2018 Intel Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * | |
| * Transmit and frame generation functions. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/slab.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/if_vlan.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/bitmap.h> | |
| #include <linux/rcupdate.h> | |
| #include <linux/export.h> | |
| #include <net/net_namespace.h> | |
| #include <net/ieee80211_radiotap.h> | |
| #include <net/cfg80211.h> | |
| #include <net/mac80211.h> | |
| #include <net/codel.h> | |
| #include <net/codel_impl.h> | |
| #include <asm/unaligned.h> | |
| #include <net/fq_impl.h> | |
| #include "ieee80211_i.h" | |
| #include "driver-ops.h" | |
| #include "led.h" | |
| #include "mesh.h" | |
| #include "wep.h" | |
| #include "wpa.h" | |
| #include "wme.h" | |
| #include "rate.h" | |
| /* misc utils */ | |
| static inline void ieee80211_tx_stats(struct net_device *dev, u32 len) | |
| { | |
| struct pcpu_sw_netstats *tstats = this_cpu_ptr(dev->tstats); | |
| u64_stats_update_begin(&tstats->syncp); | |
| tstats->tx_packets++; | |
| tstats->tx_bytes += len; | |
| u64_stats_update_end(&tstats->syncp); | |
| } | |
| static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, | |
| struct sk_buff *skb, int group_addr, | |
| int next_frag_len) | |
| { | |
| int rate, mrate, erp, dur, i, shift = 0; | |
| struct ieee80211_rate *txrate; | |
| struct ieee80211_local *local = tx->local; | |
| struct ieee80211_supported_band *sband; | |
| struct ieee80211_hdr *hdr; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| u32 rate_flags = 0; | |
| /* assume HW handles this */ | |
| if (tx->rate.flags & (IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS)) | |
| return 0; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(tx->sdata->vif.chanctx_conf); | |
| if (chanctx_conf) { | |
| shift = ieee80211_chandef_get_shift(&chanctx_conf->def); | |
| rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def); | |
| } | |
| rcu_read_unlock(); | |
| /* uh huh? */ | |
| if (WARN_ON_ONCE(tx->rate.idx < 0)) | |
| return 0; | |
| sband = local->hw.wiphy->bands[info->band]; | |
| txrate = &sband->bitrates[tx->rate.idx]; | |
| erp = txrate->flags & IEEE80211_RATE_ERP_G; | |
| /* | |
| * data and mgmt (except PS Poll): | |
| * - during CFP: 32768 | |
| * - during contention period: | |
| * if addr1 is group address: 0 | |
| * if more fragments = 0 and addr1 is individual address: time to | |
| * transmit one ACK plus SIFS | |
| * if more fragments = 1 and addr1 is individual address: time to | |
| * transmit next fragment plus 2 x ACK plus 3 x SIFS | |
| * | |
| * IEEE 802.11, 9.6: | |
| * - control response frame (CTS or ACK) shall be transmitted using the | |
| * same rate as the immediately previous frame in the frame exchange | |
| * sequence, if this rate belongs to the PHY mandatory rates, or else | |
| * at the highest possible rate belonging to the PHY rates in the | |
| * BSSBasicRateSet | |
| */ | |
| hdr = (struct ieee80211_hdr *)skb->data; | |
| if (ieee80211_is_ctl(hdr->frame_control)) { | |
| /* TODO: These control frames are not currently sent by | |
| * mac80211, but should they be implemented, this function | |
| * needs to be updated to support duration field calculation. | |
| * | |
| * RTS: time needed to transmit pending data/mgmt frame plus | |
| * one CTS frame plus one ACK frame plus 3 x SIFS | |
| * CTS: duration of immediately previous RTS minus time | |
| * required to transmit CTS and its SIFS | |
| * ACK: 0 if immediately previous directed data/mgmt had | |
| * more=0, with more=1 duration in ACK frame is duration | |
| * from previous frame minus time needed to transmit ACK | |
| * and its SIFS | |
| * PS Poll: BIT(15) | BIT(14) | aid | |
| */ | |
| return 0; | |
| } | |
| /* data/mgmt */ | |
| if (0 /* FIX: data/mgmt during CFP */) | |
| return cpu_to_le16(32768); | |
| if (group_addr) /* Group address as the destination - no ACK */ | |
| return 0; | |
| /* Individual destination address: | |
| * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes) | |
| * CTS and ACK frames shall be transmitted using the highest rate in | |
| * basic rate set that is less than or equal to the rate of the | |
| * immediately previous frame and that is using the same modulation | |
| * (CCK or OFDM). If no basic rate set matches with these requirements, | |
| * the highest mandatory rate of the PHY that is less than or equal to | |
| * the rate of the previous frame is used. | |
| * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps | |
| */ | |
| rate = -1; | |
| /* use lowest available if everything fails */ | |
| mrate = sband->bitrates[0].bitrate; | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| struct ieee80211_rate *r = &sband->bitrates[i]; | |
| if (r->bitrate > txrate->bitrate) | |
| break; | |
| if ((rate_flags & r->flags) != rate_flags) | |
| continue; | |
| if (tx->sdata->vif.bss_conf.basic_rates & BIT(i)) | |
| rate = DIV_ROUND_UP(r->bitrate, 1 << shift); | |
| switch (sband->band) { | |
| case NL80211_BAND_2GHZ: { | |
| u32 flag; | |
| if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) | |
| flag = IEEE80211_RATE_MANDATORY_G; | |
| else | |
| flag = IEEE80211_RATE_MANDATORY_B; | |
| if (r->flags & flag) | |
| mrate = r->bitrate; | |
| break; | |
| } | |
| case NL80211_BAND_5GHZ: | |
| if (r->flags & IEEE80211_RATE_MANDATORY_A) | |
| mrate = r->bitrate; | |
| break; | |
| case NL80211_BAND_60GHZ: | |
| /* TODO, for now fall through */ | |
| case NUM_NL80211_BANDS: | |
| WARN_ON(1); | |
| break; | |
| } | |
| } | |
| if (rate == -1) { | |
| /* No matching basic rate found; use highest suitable mandatory | |
| * PHY rate */ | |
| rate = DIV_ROUND_UP(mrate, 1 << shift); | |
| } | |
| /* Don't calculate ACKs for QoS Frames with NoAck Policy set */ | |
| if (ieee80211_is_data_qos(hdr->frame_control) && | |
| *(ieee80211_get_qos_ctl(hdr)) & IEEE80211_QOS_CTL_ACK_POLICY_NOACK) | |
| dur = 0; | |
| else | |
| /* Time needed to transmit ACK | |
| * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up | |
| * to closest integer */ | |
| dur = ieee80211_frame_duration(sband->band, 10, rate, erp, | |
| tx->sdata->vif.bss_conf.use_short_preamble, | |
| shift); | |
| if (next_frag_len) { | |
| /* Frame is fragmented: duration increases with time needed to | |
| * transmit next fragment plus ACK and 2 x SIFS. */ | |
| dur *= 2; /* ACK + SIFS */ | |
| /* next fragment */ | |
| dur += ieee80211_frame_duration(sband->band, next_frag_len, | |
| txrate->bitrate, erp, | |
| tx->sdata->vif.bss_conf.use_short_preamble, | |
| shift); | |
| } | |
| return cpu_to_le16(dur); | |
| } | |
| /* tx handlers */ | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_local *local = tx->local; | |
| struct ieee80211_if_managed *ifmgd; | |
| /* driver doesn't support power save */ | |
| if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) | |
| return TX_CONTINUE; | |
| /* hardware does dynamic power save */ | |
| if (ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) | |
| return TX_CONTINUE; | |
| /* dynamic power save disabled */ | |
| if (local->hw.conf.dynamic_ps_timeout <= 0) | |
| return TX_CONTINUE; | |
| /* we are scanning, don't enable power save */ | |
| if (local->scanning) | |
| return TX_CONTINUE; | |
| if (!local->ps_sdata) | |
| return TX_CONTINUE; | |
| /* No point if we're going to suspend */ | |
| if (local->quiescing) | |
| return TX_CONTINUE; | |
| /* dynamic ps is supported only in managed mode */ | |
| if (tx->sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return TX_CONTINUE; | |
| ifmgd = &tx->sdata->u.mgd; | |
| /* | |
| * Don't wakeup from power save if u-apsd is enabled, voip ac has | |
| * u-apsd enabled and the frame is in voip class. This effectively | |
| * means that even if all access categories have u-apsd enabled, in | |
| * practise u-apsd is only used with the voip ac. This is a | |
| * workaround for the case when received voip class packets do not | |
| * have correct qos tag for some reason, due the network or the | |
| * peer application. | |
| * | |
| * Note: ifmgd->uapsd_queues access is racy here. If the value is | |
| * changed via debugfs, user needs to reassociate manually to have | |
| * everything in sync. | |
| */ | |
| if ((ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) && | |
| (ifmgd->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) && | |
| skb_get_queue_mapping(tx->skb) == IEEE80211_AC_VO) | |
| return TX_CONTINUE; | |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { | |
| ieee80211_stop_queues_by_reason(&local->hw, | |
| IEEE80211_MAX_QUEUE_MAP, | |
| IEEE80211_QUEUE_STOP_REASON_PS, | |
| false); | |
| ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; | |
| ieee80211_queue_work(&local->hw, | |
| &local->dynamic_ps_disable_work); | |
| } | |
| /* Don't restart the timer if we're not disassociated */ | |
| if (!ifmgd->associated) | |
| return TX_CONTINUE; | |
| mod_timer(&local->dynamic_ps_timer, jiffies + | |
| msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout)); | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| bool assoc = false; | |
| if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) | |
| return TX_CONTINUE; | |
| if (unlikely(test_bit(SCAN_SW_SCANNING, &tx->local->scanning)) && | |
| test_bit(SDATA_STATE_OFFCHANNEL, &tx->sdata->state) && | |
| !ieee80211_is_probe_req(hdr->frame_control) && | |
| !ieee80211_is_nullfunc(hdr->frame_control)) | |
| /* | |
| * When software scanning only nullfunc frames (to notify | |
| * the sleep state to the AP) and probe requests (for the | |
| * active scan) are allowed, all other frames should not be | |
| * sent and we should not get here, but if we do | |
| * nonetheless, drop them to avoid sending them | |
| * off-channel. See the link below and | |
| * ieee80211_start_scan() for more. | |
| * | |
| * http://article.gmane.org/gmane.linux.kernel.wireless.general/30089 | |
| */ | |
| return TX_DROP; | |
| if (tx->sdata->vif.type == NL80211_IFTYPE_OCB) | |
| return TX_CONTINUE; | |
| if (tx->sdata->vif.type == NL80211_IFTYPE_WDS) | |
| return TX_CONTINUE; | |
| if (tx->flags & IEEE80211_TX_PS_BUFFERED) | |
| return TX_CONTINUE; | |
| if (tx->sta) | |
| assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); | |
| if (likely(tx->flags & IEEE80211_TX_UNICAST)) { | |
| if (unlikely(!assoc && | |
| ieee80211_is_data(hdr->frame_control))) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| sdata_info(tx->sdata, | |
| "dropped data frame to not associated station %pM\n", | |
| hdr->addr1); | |
| #endif | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc); | |
| return TX_DROP; | |
| } | |
| } else if (unlikely(ieee80211_is_data(hdr->frame_control) && | |
| ieee80211_vif_get_num_mcast_if(tx->sdata) == 0)) { | |
| /* | |
| * No associated STAs - no need to send multicast | |
| * frames. | |
| */ | |
| return TX_DROP; | |
| } | |
| return TX_CONTINUE; | |
| } | |
| /* This function is called whenever the AP is about to exceed the maximum limit | |
| * of buffered frames for power saving STAs. This situation should not really | |
| * happen often during normal operation, so dropping the oldest buffered packet | |
| * from each queue should be OK to make some room for new frames. */ | |
| static void purge_old_ps_buffers(struct ieee80211_local *local) | |
| { | |
| int total = 0, purged = 0; | |
| struct sk_buff *skb; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct sta_info *sta; | |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { | |
| struct ps_data *ps; | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) | |
| ps = &sdata->u.ap.ps; | |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) | |
| ps = &sdata->u.mesh.ps; | |
| else | |
| continue; | |
| skb = skb_dequeue(&ps->bc_buf); | |
| if (skb) { | |
| purged++; | |
| ieee80211_free_txskb(&local->hw, skb); | |
| } | |
| total += skb_queue_len(&ps->bc_buf); | |
| } | |
| /* | |
| * Drop one frame from each station from the lowest-priority | |
| * AC that has frames at all. | |
| */ | |
| list_for_each_entry_rcu(sta, &local->sta_list, list) { | |
| int ac; | |
| for (ac = IEEE80211_AC_BK; ac >= IEEE80211_AC_VO; ac--) { | |
| skb = skb_dequeue(&sta->ps_tx_buf[ac]); | |
| total += skb_queue_len(&sta->ps_tx_buf[ac]); | |
| if (skb) { | |
| purged++; | |
| ieee80211_free_txskb(&local->hw, skb); | |
| break; | |
| } | |
| } | |
| } | |
| local->total_ps_buffered = total; | |
| ps_dbg_hw(&local->hw, "PS buffers full - purged %d frames\n", purged); | |
| } | |
| static ieee80211_tx_result | |
| ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| struct ps_data *ps; | |
| /* | |
| * broadcast/multicast frame | |
| * | |
| * If any of the associated/peer stations is in power save mode, | |
| * the frame is buffered to be sent after DTIM beacon frame. | |
| * This is done either by the hardware or us. | |
| */ | |
| /* powersaving STAs currently only in AP/VLAN/mesh mode */ | |
| if (tx->sdata->vif.type == NL80211_IFTYPE_AP || | |
| tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | |
| if (!tx->sdata->bss) | |
| return TX_CONTINUE; | |
| ps = &tx->sdata->bss->ps; | |
| } else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) { | |
| ps = &tx->sdata->u.mesh.ps; | |
| } else { | |
| return TX_CONTINUE; | |
| } | |
| /* no buffering for ordered frames */ | |
| if (ieee80211_has_order(hdr->frame_control)) | |
| return TX_CONTINUE; | |
| if (ieee80211_is_probe_req(hdr->frame_control)) | |
| return TX_CONTINUE; | |
| if (ieee80211_hw_check(&tx->local->hw, QUEUE_CONTROL)) | |
| info->hw_queue = tx->sdata->vif.cab_queue; | |
| /* no stations in PS mode and no buffered packets */ | |
| if (!atomic_read(&ps->num_sta_ps) && skb_queue_empty(&ps->bc_buf)) | |
| return TX_CONTINUE; | |
| info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM; | |
| /* device releases frame after DTIM beacon */ | |
| if (!ieee80211_hw_check(&tx->local->hw, HOST_BROADCAST_PS_BUFFERING)) | |
| return TX_CONTINUE; | |
| /* buffered in mac80211 */ | |
| if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | |
| purge_old_ps_buffers(tx->local); | |
| if (skb_queue_len(&ps->bc_buf) >= AP_MAX_BC_BUFFER) { | |
| ps_dbg(tx->sdata, | |
| "BC TX buffer full - dropping the oldest frame\n"); | |
| ieee80211_free_txskb(&tx->local->hw, skb_dequeue(&ps->bc_buf)); | |
| } else | |
| tx->local->total_ps_buffered++; | |
| skb_queue_tail(&ps->bc_buf, tx->skb); | |
| return TX_QUEUED; | |
| } | |
| static int ieee80211_use_mfp(__le16 fc, struct sta_info *sta, | |
| struct sk_buff *skb) | |
| { | |
| if (!ieee80211_is_mgmt(fc)) | |
| return 0; | |
| if (sta == NULL || !test_sta_flag(sta, WLAN_STA_MFP)) | |
| return 0; | |
| if (!ieee80211_is_robust_mgmt_frame(skb)) | |
| return 0; | |
| return 1; | |
| } | |
| static ieee80211_tx_result | |
| ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) | |
| { | |
| struct sta_info *sta = tx->sta; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| struct ieee80211_local *local = tx->local; | |
| if (unlikely(!sta)) | |
| return TX_CONTINUE; | |
| if (unlikely((test_sta_flag(sta, WLAN_STA_PS_STA) || | |
| test_sta_flag(sta, WLAN_STA_PS_DRIVER) || | |
| test_sta_flag(sta, WLAN_STA_PS_DELIVER)) && | |
| !(info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER))) { | |
| int ac = skb_get_queue_mapping(tx->skb); | |
| if (ieee80211_is_mgmt(hdr->frame_control) && | |
| !ieee80211_is_bufferable_mmpdu(hdr->frame_control)) { | |
| info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; | |
| return TX_CONTINUE; | |
| } | |
| ps_dbg(sta->sdata, "STA %pM aid %d: PS buffer for AC %d\n", | |
| sta->sta.addr, sta->sta.aid, ac); | |
| if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) | |
| purge_old_ps_buffers(tx->local); | |
| /* sync with ieee80211_sta_ps_deliver_wakeup */ | |
| spin_lock(&sta->ps_lock); | |
| /* | |
| * STA woke up the meantime and all the frames on ps_tx_buf have | |
| * been queued to pending queue. No reordering can happen, go | |
| * ahead and Tx the packet. | |
| */ | |
| if (!test_sta_flag(sta, WLAN_STA_PS_STA) && | |
| !test_sta_flag(sta, WLAN_STA_PS_DRIVER) && | |
| !test_sta_flag(sta, WLAN_STA_PS_DELIVER)) { | |
| spin_unlock(&sta->ps_lock); | |
| return TX_CONTINUE; | |
| } | |
| if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) { | |
| struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]); | |
| ps_dbg(tx->sdata, | |
| "STA %pM TX buffer for AC %d full - dropping oldest frame\n", | |
| sta->sta.addr, ac); | |
| ieee80211_free_txskb(&local->hw, old); | |
| } else | |
| tx->local->total_ps_buffered++; | |
| info->control.jiffies = jiffies; | |
| info->control.vif = &tx->sdata->vif; | |
| info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; | |
| info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS; | |
| skb_queue_tail(&sta->ps_tx_buf[ac], tx->skb); | |
| spin_unlock(&sta->ps_lock); | |
| if (!timer_pending(&local->sta_cleanup)) | |
| mod_timer(&local->sta_cleanup, | |
| round_jiffies(jiffies + | |
| STA_INFO_CLEANUP_INTERVAL)); | |
| /* | |
| * We queued up some frames, so the TIM bit might | |
| * need to be set, recalculate it. | |
| */ | |
| sta_info_recalc_tim(sta); | |
| return TX_QUEUED; | |
| } else if (unlikely(test_sta_flag(sta, WLAN_STA_PS_STA))) { | |
| ps_dbg(tx->sdata, | |
| "STA %pM in PS mode, but polling/in SP -> send frame\n", | |
| sta->sta.addr); | |
| } | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx) | |
| { | |
| if (unlikely(tx->flags & IEEE80211_TX_PS_BUFFERED)) | |
| return TX_CONTINUE; | |
| if (tx->flags & IEEE80211_TX_UNICAST) | |
| return ieee80211_tx_h_unicast_ps_buf(tx); | |
| else | |
| return ieee80211_tx_h_multicast_ps_buf(tx); | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_check_control_port_protocol(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol)) { | |
| if (tx->sdata->control_port_no_encrypt) | |
| info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | |
| info->control.flags |= IEEE80211_TX_CTRL_PORT_CTRL_PROTO; | |
| info->flags |= IEEE80211_TX_CTL_USE_MINRATE; | |
| } | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_key *key; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) | |
| tx->key = NULL; | |
| else if (tx->sta && | |
| (key = rcu_dereference(tx->sta->ptk[tx->sta->ptk_idx]))) | |
| tx->key = key; | |
| else if (ieee80211_is_group_privacy_action(tx->skb) && | |
| (key = rcu_dereference(tx->sdata->default_multicast_key))) | |
| tx->key = key; | |
| else if (ieee80211_is_mgmt(hdr->frame_control) && | |
| is_multicast_ether_addr(hdr->addr1) && | |
| ieee80211_is_robust_mgmt_frame(tx->skb) && | |
| (key = rcu_dereference(tx->sdata->default_mgmt_key))) | |
| tx->key = key; | |
| else if (is_multicast_ether_addr(hdr->addr1) && | |
| (key = rcu_dereference(tx->sdata->default_multicast_key))) | |
| tx->key = key; | |
| else if (!is_multicast_ether_addr(hdr->addr1) && | |
| (key = rcu_dereference(tx->sdata->default_unicast_key))) | |
| tx->key = key; | |
| else | |
| tx->key = NULL; | |
| if (tx->key) { | |
| bool skip_hw = false; | |
| /* TODO: add threshold stuff again */ | |
| switch (tx->key->conf.cipher) { | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| if (!ieee80211_is_data_present(hdr->frame_control)) | |
| tx->key = NULL; | |
| break; | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| case WLAN_CIPHER_SUITE_CCMP_256: | |
| case WLAN_CIPHER_SUITE_GCMP: | |
| case WLAN_CIPHER_SUITE_GCMP_256: | |
| if (!ieee80211_is_data_present(hdr->frame_control) && | |
| !ieee80211_use_mfp(hdr->frame_control, tx->sta, | |
| tx->skb) && | |
| !ieee80211_is_group_privacy_action(tx->skb)) | |
| tx->key = NULL; | |
| else | |
| skip_hw = (tx->key->conf.flags & | |
| IEEE80211_KEY_FLAG_SW_MGMT_TX) && | |
| ieee80211_is_mgmt(hdr->frame_control); | |
| break; | |
| case WLAN_CIPHER_SUITE_AES_CMAC: | |
| case WLAN_CIPHER_SUITE_BIP_CMAC_256: | |
| case WLAN_CIPHER_SUITE_BIP_GMAC_128: | |
| case WLAN_CIPHER_SUITE_BIP_GMAC_256: | |
| if (!ieee80211_is_mgmt(hdr->frame_control)) | |
| tx->key = NULL; | |
| break; | |
| } | |
| if (unlikely(tx->key && tx->key->flags & KEY_FLAG_TAINTED && | |
| !ieee80211_is_deauth(hdr->frame_control))) | |
| return TX_DROP; | |
| if (!skip_hw && tx->key && | |
| tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) | |
| info->control.hw_key = &tx->key->conf; | |
| } | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (void *)tx->skb->data; | |
| struct ieee80211_supported_band *sband; | |
| u32 len; | |
| struct ieee80211_tx_rate_control txrc; | |
| struct ieee80211_sta_rates *ratetbl = NULL; | |
| bool assoc = false; | |
| memset(&txrc, 0, sizeof(txrc)); | |
| sband = tx->local->hw.wiphy->bands[info->band]; | |
| len = min_t(u32, tx->skb->len + FCS_LEN, | |
| tx->local->hw.wiphy->frag_threshold); | |
| /* set up the tx rate control struct we give the RC algo */ | |
| txrc.hw = &tx->local->hw; | |
| txrc.sband = sband; | |
| txrc.bss_conf = &tx->sdata->vif.bss_conf; | |
| txrc.skb = tx->skb; | |
| txrc.reported_rate.idx = -1; | |
| txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[info->band]; | |
| if (tx->sdata->rc_has_mcs_mask[info->band]) | |
| txrc.rate_idx_mcs_mask = | |
| tx->sdata->rc_rateidx_mcs_mask[info->band]; | |
| txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP || | |
| tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT || | |
| tx->sdata->vif.type == NL80211_IFTYPE_ADHOC || | |
| tx->sdata->vif.type == NL80211_IFTYPE_OCB); | |
| /* set up RTS protection if desired */ | |
| if (len > tx->local->hw.wiphy->rts_threshold) { | |
| txrc.rts = true; | |
| } | |
| info->control.use_rts = txrc.rts; | |
| info->control.use_cts_prot = tx->sdata->vif.bss_conf.use_cts_prot; | |
| /* | |
| * Use short preamble if the BSS can handle it, but not for | |
| * management frames unless we know the receiver can handle | |
| * that -- the management frame might be to a station that | |
| * just wants a probe response. | |
| */ | |
| if (tx->sdata->vif.bss_conf.use_short_preamble && | |
| (ieee80211_is_data(hdr->frame_control) || | |
| (tx->sta && test_sta_flag(tx->sta, WLAN_STA_SHORT_PREAMBLE)))) | |
| txrc.short_preamble = true; | |
| info->control.short_preamble = txrc.short_preamble; | |
| /* don't ask rate control when rate already injected via radiotap */ | |
| if (info->control.flags & IEEE80211_TX_CTRL_RATE_INJECT) | |
| return TX_CONTINUE; | |
| if (tx->sta) | |
| assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); | |
| /* | |
| * Lets not bother rate control if we're associated and cannot | |
| * talk to the sta. This should not happen. | |
| */ | |
| if (WARN(test_bit(SCAN_SW_SCANNING, &tx->local->scanning) && assoc && | |
| !rate_usable_index_exists(sband, &tx->sta->sta), | |
| "%s: Dropped data frame as no usable bitrate found while " | |
| "scanning and associated. Target station: " | |
| "%pM on %d GHz band\n", | |
| tx->sdata->name, hdr->addr1, | |
| info->band ? 5 : 2)) | |
| return TX_DROP; | |
| /* | |
| * If we're associated with the sta at this point we know we can at | |
| * least send the frame at the lowest bit rate. | |
| */ | |
| rate_control_get_rate(tx->sdata, tx->sta, &txrc); | |
| if (tx->sta && !info->control.skip_table) | |
| ratetbl = rcu_dereference(tx->sta->sta.rates); | |
| if (unlikely(info->control.rates[0].idx < 0)) { | |
| if (ratetbl) { | |
| struct ieee80211_tx_rate rate = { | |
| .idx = ratetbl->rate[0].idx, | |
| .flags = ratetbl->rate[0].flags, | |
| .count = ratetbl->rate[0].count | |
| }; | |
| if (ratetbl->rate[0].idx < 0) | |
| return TX_DROP; | |
| tx->rate = rate; | |
| } else { | |
| return TX_DROP; | |
| } | |
| } else { | |
| tx->rate = info->control.rates[0]; | |
| } | |
| if (txrc.reported_rate.idx < 0) { | |
| txrc.reported_rate = tx->rate; | |
| if (tx->sta && ieee80211_is_data(hdr->frame_control)) | |
| tx->sta->tx_stats.last_rate = txrc.reported_rate; | |
| } else if (tx->sta) | |
| tx->sta->tx_stats.last_rate = txrc.reported_rate; | |
| if (ratetbl) | |
| return TX_CONTINUE; | |
| if (unlikely(!info->control.rates[0].count)) | |
| info->control.rates[0].count = 1; | |
| if (WARN_ON_ONCE((info->control.rates[0].count > 1) && | |
| (info->flags & IEEE80211_TX_CTL_NO_ACK))) | |
| info->control.rates[0].count = 1; | |
| return TX_CONTINUE; | |
| } | |
| static __le16 ieee80211_tx_next_seq(struct sta_info *sta, int tid) | |
| { | |
| u16 *seq = &sta->tid_seq[tid]; | |
| __le16 ret = cpu_to_le16(*seq); | |
| /* Increase the sequence number. */ | |
| *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ; | |
| return ret; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; | |
| u8 *qc; | |
| int tid; | |
| /* | |
| * Packet injection may want to control the sequence | |
| * number, if we have no matching interface then we | |
| * neither assign one ourselves nor ask the driver to. | |
| */ | |
| if (unlikely(info->control.vif->type == NL80211_IFTYPE_MONITOR)) | |
| return TX_CONTINUE; | |
| if (unlikely(ieee80211_is_ctl(hdr->frame_control))) | |
| return TX_CONTINUE; | |
| if (ieee80211_hdrlen(hdr->frame_control) < 24) | |
| return TX_CONTINUE; | |
| if (ieee80211_is_qos_nullfunc(hdr->frame_control)) | |
| return TX_CONTINUE; | |
| /* | |
| * Anything but QoS data that has a sequence number field | |
| * (is long enough) gets a sequence number from the global | |
| * counter. QoS data frames with a multicast destination | |
| * also use the global counter (802.11-2012 9.3.2.10). | |
| */ | |
| if (!ieee80211_is_data_qos(hdr->frame_control) || | |
| is_multicast_ether_addr(hdr->addr1)) { | |
| /* driver should assign sequence number */ | |
| info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; | |
| /* for pure STA mode without beacons, we can do it */ | |
| hdr->seq_ctrl = cpu_to_le16(tx->sdata->sequence_number); | |
| tx->sdata->sequence_number += 0x10; | |
| if (tx->sta) | |
| tx->sta->tx_stats.msdu[IEEE80211_NUM_TIDS]++; | |
| return TX_CONTINUE; | |
| } | |
| /* | |
| * This should be true for injected/management frames only, for | |
| * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ | |
| * above since they are not QoS-data frames. | |
| */ | |
| if (!tx->sta) | |
| return TX_CONTINUE; | |
| /* include per-STA, per-TID sequence counter */ | |
| qc = ieee80211_get_qos_ctl(hdr); | |
| tid = *qc & IEEE80211_QOS_CTL_TID_MASK; | |
| tx->sta->tx_stats.msdu[tid]++; | |
| hdr->seq_ctrl = ieee80211_tx_next_seq(tx->sta, tid); | |
| return TX_CONTINUE; | |
| } | |
| static int ieee80211_fragment(struct ieee80211_tx_data *tx, | |
| struct sk_buff *skb, int hdrlen, | |
| int frag_threshold) | |
| { | |
| struct ieee80211_local *local = tx->local; | |
| struct ieee80211_tx_info *info; | |
| struct sk_buff *tmp; | |
| int per_fragm = frag_threshold - hdrlen - FCS_LEN; | |
| int pos = hdrlen + per_fragm; | |
| int rem = skb->len - hdrlen - per_fragm; | |
| if (WARN_ON(rem < 0)) | |
| return -EINVAL; | |
| /* first fragment was already added to queue by caller */ | |
| while (rem) { | |
| int fraglen = per_fragm; | |
| if (fraglen > rem) | |
| fraglen = rem; | |
| rem -= fraglen; | |
| tmp = dev_alloc_skb(local->tx_headroom + | |
| frag_threshold + | |
| tx->sdata->encrypt_headroom + | |
| IEEE80211_ENCRYPT_TAILROOM); | |
| if (!tmp) | |
| return -ENOMEM; | |
| __skb_queue_tail(&tx->skbs, tmp); | |
| skb_reserve(tmp, | |
| local->tx_headroom + tx->sdata->encrypt_headroom); | |
| /* copy control information */ | |
| memcpy(tmp->cb, skb->cb, sizeof(tmp->cb)); | |
| info = IEEE80211_SKB_CB(tmp); | |
| info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT | | |
| IEEE80211_TX_CTL_FIRST_FRAGMENT); | |
| if (rem) | |
| info->flags |= IEEE80211_TX_CTL_MORE_FRAMES; | |
| skb_copy_queue_mapping(tmp, skb); | |
| tmp->priority = skb->priority; | |
| tmp->dev = skb->dev; | |
| /* copy header and data */ | |
| skb_put_data(tmp, skb->data, hdrlen); | |
| skb_put_data(tmp, skb->data + pos, fraglen); | |
| pos += fraglen; | |
| } | |
| /* adjust first fragment's length */ | |
| skb_trim(skb, hdrlen + per_fragm); | |
| return 0; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) | |
| { | |
| struct sk_buff *skb = tx->skb; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr = (void *)skb->data; | |
| int frag_threshold = tx->local->hw.wiphy->frag_threshold; | |
| int hdrlen; | |
| int fragnum; | |
| /* no matter what happens, tx->skb moves to tx->skbs */ | |
| __skb_queue_tail(&tx->skbs, skb); | |
| tx->skb = NULL; | |
| if (info->flags & IEEE80211_TX_CTL_DONTFRAG) | |
| return TX_CONTINUE; | |
| if (ieee80211_hw_check(&tx->local->hw, SUPPORTS_TX_FRAG)) | |
| return TX_CONTINUE; | |
| /* | |
| * Warn when submitting a fragmented A-MPDU frame and drop it. | |
| * This scenario is handled in ieee80211_tx_prepare but extra | |
| * caution taken here as fragmented ampdu may cause Tx stop. | |
| */ | |
| if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU)) | |
| return TX_DROP; | |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); | |
| /* internal error, why isn't DONTFRAG set? */ | |
| if (WARN_ON(skb->len + FCS_LEN <= frag_threshold)) | |
| return TX_DROP; | |
| /* | |
| * Now fragment the frame. This will allocate all the fragments and | |
| * chain them (using skb as the first fragment) to skb->next. | |
| * During transmission, we will remove the successfully transmitted | |
| * fragments from this list. When the low-level driver rejects one | |
| * of the fragments then we will simply pretend to accept the skb | |
| * but store it away as pending. | |
| */ | |
| if (ieee80211_fragment(tx, skb, hdrlen, frag_threshold)) | |
| return TX_DROP; | |
| /* update duration/seq/flags of fragments */ | |
| fragnum = 0; | |
| skb_queue_walk(&tx->skbs, skb) { | |
| const __le16 morefrags = cpu_to_le16(IEEE80211_FCTL_MOREFRAGS); | |
| hdr = (void *)skb->data; | |
| info = IEEE80211_SKB_CB(skb); | |
| if (!skb_queue_is_last(&tx->skbs, skb)) { | |
| hdr->frame_control |= morefrags; | |
| /* | |
| * No multi-rate retries for fragmented frames, that | |
| * would completely throw off the NAV at other STAs. | |
| */ | |
| info->control.rates[1].idx = -1; | |
| info->control.rates[2].idx = -1; | |
| info->control.rates[3].idx = -1; | |
| BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 4); | |
| info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; | |
| } else { | |
| hdr->frame_control &= ~morefrags; | |
| } | |
| hdr->seq_ctrl |= cpu_to_le16(fragnum & IEEE80211_SCTL_FRAG); | |
| fragnum++; | |
| } | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_stats(struct ieee80211_tx_data *tx) | |
| { | |
| struct sk_buff *skb; | |
| int ac = -1; | |
| if (!tx->sta) | |
| return TX_CONTINUE; | |
| skb_queue_walk(&tx->skbs, skb) { | |
| ac = skb_get_queue_mapping(skb); | |
| tx->sta->tx_stats.bytes[ac] += skb->len; | |
| } | |
| if (ac >= 0) | |
| tx->sta->tx_stats.packets[ac]++; | |
| return TX_CONTINUE; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx) | |
| { | |
| if (!tx->key) | |
| return TX_CONTINUE; | |
| switch (tx->key->conf.cipher) { | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| return ieee80211_crypto_wep_encrypt(tx); | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| return ieee80211_crypto_tkip_encrypt(tx); | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| return ieee80211_crypto_ccmp_encrypt( | |
| tx, IEEE80211_CCMP_MIC_LEN); | |
| case WLAN_CIPHER_SUITE_CCMP_256: | |
| return ieee80211_crypto_ccmp_encrypt( | |
| tx, IEEE80211_CCMP_256_MIC_LEN); | |
| case WLAN_CIPHER_SUITE_AES_CMAC: | |
| return ieee80211_crypto_aes_cmac_encrypt(tx); | |
| case WLAN_CIPHER_SUITE_BIP_CMAC_256: | |
| return ieee80211_crypto_aes_cmac_256_encrypt(tx); | |
| case WLAN_CIPHER_SUITE_BIP_GMAC_128: | |
| case WLAN_CIPHER_SUITE_BIP_GMAC_256: | |
| return ieee80211_crypto_aes_gmac_encrypt(tx); | |
| case WLAN_CIPHER_SUITE_GCMP: | |
| case WLAN_CIPHER_SUITE_GCMP_256: | |
| return ieee80211_crypto_gcmp_encrypt(tx); | |
| default: | |
| return ieee80211_crypto_hw_encrypt(tx); | |
| } | |
| return TX_DROP; | |
| } | |
| static ieee80211_tx_result debug_noinline | |
| ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx) | |
| { | |
| struct sk_buff *skb; | |
| struct ieee80211_hdr *hdr; | |
| int next_len; | |
| bool group_addr; | |
| skb_queue_walk(&tx->skbs, skb) { | |
| hdr = (void *) skb->data; | |
| if (unlikely(ieee80211_is_pspoll(hdr->frame_control))) | |
| break; /* must not overwrite AID */ | |
| if (!skb_queue_is_last(&tx->skbs, skb)) { | |
| struct sk_buff *next = skb_queue_next(&tx->skbs, skb); | |
| next_len = next->len; | |
| } else | |
| next_len = 0; | |
| group_addr = is_multicast_ether_addr(hdr->addr1); | |
| hdr->duration_id = | |
| ieee80211_duration(tx, skb, group_addr, next_len); | |
| } | |
| return TX_CONTINUE; | |
| } | |
| /* actual transmit path */ | |
| static bool ieee80211_tx_prep_agg(struct ieee80211_tx_data *tx, | |
| struct sk_buff *skb, | |
| struct ieee80211_tx_info *info, | |
| struct tid_ampdu_tx *tid_tx, | |
| int tid) | |
| { | |
| bool queued = false; | |
| bool reset_agg_timer = false; | |
| struct sk_buff *purge_skb = NULL; | |
| if (test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { | |
| info->flags |= IEEE80211_TX_CTL_AMPDU; | |
| reset_agg_timer = true; | |
| } else if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { | |
| /* | |
| * nothing -- this aggregation session is being started | |
| * but that might still fail with the driver | |
| */ | |
| } else if (!tx->sta->sta.txq[tid]) { | |
| spin_lock(&tx->sta->lock); | |
| /* | |
| * Need to re-check now, because we may get here | |
| * | |
| * 1) in the window during which the setup is actually | |
| * already done, but not marked yet because not all | |
| * packets are spliced over to the driver pending | |
| * queue yet -- if this happened we acquire the lock | |
| * either before or after the splice happens, but | |
| * need to recheck which of these cases happened. | |
| * | |
| * 2) during session teardown, if the OPERATIONAL bit | |
| * was cleared due to the teardown but the pointer | |
| * hasn't been assigned NULL yet (or we loaded it | |
| * before it was assigned) -- in this case it may | |
| * now be NULL which means we should just let the | |
| * packet pass through because splicing the frames | |
| * back is already done. | |
| */ | |
| tid_tx = rcu_dereference_protected_tid_tx(tx->sta, tid); | |
| if (!tid_tx) { | |
| /* do nothing, let packet pass through */ | |
| } else if (test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { | |
| info->flags |= IEEE80211_TX_CTL_AMPDU; | |
| reset_agg_timer = true; | |
| } else { | |
| queued = true; | |
| if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) { | |
| clear_sta_flag(tx->sta, WLAN_STA_SP); | |
| ps_dbg(tx->sta->sdata, | |
| "STA %pM aid %d: SP frame queued, close the SP w/o telling the peer\n", | |
| tx->sta->sta.addr, tx->sta->sta.aid); | |
| } | |
| info->control.vif = &tx->sdata->vif; | |
| info->flags |= IEEE80211_TX_INTFL_NEED_TXPROCESSING; | |
| info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS; | |
| __skb_queue_tail(&tid_tx->pending, skb); | |
| if (skb_queue_len(&tid_tx->pending) > STA_MAX_TX_BUFFER) | |
| purge_skb = __skb_dequeue(&tid_tx->pending); | |
| } | |
| spin_unlock(&tx->sta->lock); | |
| if (purge_skb) | |
| ieee80211_free_txskb(&tx->local->hw, purge_skb); | |
| } | |
| /* reset session timer */ | |
| if (reset_agg_timer) | |
| tid_tx->last_tx = jiffies; | |
| return queued; | |
| } | |
| /* | |
| * initialises @tx | |
| * pass %NULL for the station if unknown, a valid pointer if known | |
| * or an ERR_PTR() if the station is known not to exist | |
| */ | |
| static ieee80211_tx_result | |
| ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_tx_data *tx, | |
| struct sta_info *sta, struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_hdr *hdr; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| int tid; | |
| u8 *qc; | |
| memset(tx, 0, sizeof(*tx)); | |
| tx->skb = skb; | |
| tx->local = local; | |
| tx->sdata = sdata; | |
| __skb_queue_head_init(&tx->skbs); | |
| /* | |
| * If this flag is set to true anywhere, and we get here, | |
| * we are doing the needed processing, so remove the flag | |
| * now. | |
| */ | |
| info->flags &= ~IEEE80211_TX_INTFL_NEED_TXPROCESSING; | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| if (likely(sta)) { | |
| if (!IS_ERR(sta)) | |
| tx->sta = sta; | |
| } else { | |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | |
| tx->sta = rcu_dereference(sdata->u.vlan.sta); | |
| if (!tx->sta && sdata->wdev.use_4addr) | |
| return TX_DROP; | |
| } else if (info->flags & (IEEE80211_TX_INTFL_NL80211_FRAME_TX | | |
| IEEE80211_TX_CTL_INJECTED) || | |
| tx->sdata->control_port_protocol == tx->skb->protocol) { | |
| tx->sta = sta_info_get_bss(sdata, hdr->addr1); | |
| } | |
| if (!tx->sta && !is_multicast_ether_addr(hdr->addr1)) | |
| tx->sta = sta_info_get(sdata, hdr->addr1); | |
| } | |
| if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) && | |
| !ieee80211_is_qos_nullfunc(hdr->frame_control) && | |
| ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) && | |
| !ieee80211_hw_check(&local->hw, TX_AMPDU_SETUP_IN_HW)) { | |
| struct tid_ampdu_tx *tid_tx; | |
| qc = ieee80211_get_qos_ctl(hdr); | |
| tid = *qc & IEEE80211_QOS_CTL_TID_MASK; | |
| tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]); | |
| if (tid_tx) { | |
| bool queued; | |
| queued = ieee80211_tx_prep_agg(tx, skb, info, | |
| tid_tx, tid); | |
| if (unlikely(queued)) | |
| return TX_QUEUED; | |
| } | |
| } | |
| if (is_multicast_ether_addr(hdr->addr1)) { | |
| tx->flags &= ~IEEE80211_TX_UNICAST; | |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; | |
| } else | |
| tx->flags |= IEEE80211_TX_UNICAST; | |
| if (!(info->flags & IEEE80211_TX_CTL_DONTFRAG)) { | |
| if (!(tx->flags & IEEE80211_TX_UNICAST) || | |
| skb->len + FCS_LEN <= local->hw.wiphy->frag_threshold || | |
| info->flags & IEEE80211_TX_CTL_AMPDU) | |
| info->flags |= IEEE80211_TX_CTL_DONTFRAG; | |
| } | |
| if (!tx->sta) | |
| info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; | |
| else if (test_and_clear_sta_flag(tx->sta, WLAN_STA_CLEAR_PS_FILT)) { | |
| info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; | |
| ieee80211_check_fast_xmit(tx->sta); | |
| } | |
| info->flags |= IEEE80211_TX_CTL_FIRST_FRAGMENT; | |
| return TX_CONTINUE; | |
| } | |
| static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local, | |
| struct ieee80211_vif *vif, | |
| struct sta_info *sta, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_txq *txq = NULL; | |
| if ((info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) || | |
| (info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE)) | |
| return NULL; | |
| if (!ieee80211_is_data(hdr->frame_control)) | |
| return NULL; | |
| if (sta) { | |
| u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK; | |
| if (!sta->uploaded) | |
| return NULL; | |
| txq = sta->sta.txq[tid]; | |
| } else if (vif) { | |
| txq = vif->txq; | |
| } | |
| if (!txq) | |
| return NULL; | |
| return to_txq_info(txq); | |
| } | |
| static void ieee80211_set_skb_enqueue_time(struct sk_buff *skb) | |
| { | |
| IEEE80211_SKB_CB(skb)->control.enqueue_time = codel_get_time(); | |
| } | |
| static u32 codel_skb_len_func(const struct sk_buff *skb) | |
| { | |
| return skb->len; | |
| } | |
| static codel_time_t codel_skb_time_func(const struct sk_buff *skb) | |
| { | |
| const struct ieee80211_tx_info *info; | |
| info = (const struct ieee80211_tx_info *)skb->cb; | |
| return info->control.enqueue_time; | |
| } | |
| static struct sk_buff *codel_dequeue_func(struct codel_vars *cvars, | |
| void *ctx) | |
| { | |
| struct ieee80211_local *local; | |
| struct txq_info *txqi; | |
| struct fq *fq; | |
| struct fq_flow *flow; | |
| txqi = ctx; | |
| local = vif_to_sdata(txqi->txq.vif)->local; | |
| fq = &local->fq; | |
| if (cvars == &txqi->def_cvars) | |
| flow = &txqi->def_flow; | |
| else | |
| flow = &fq->flows[cvars - local->cvars]; | |
| return fq_flow_dequeue(fq, flow); | |
| } | |
| static void codel_drop_func(struct sk_buff *skb, | |
| void *ctx) | |
| { | |
| struct ieee80211_local *local; | |
| struct ieee80211_hw *hw; | |
| struct txq_info *txqi; | |
| txqi = ctx; | |
| local = vif_to_sdata(txqi->txq.vif)->local; | |
| hw = &local->hw; | |
| ieee80211_free_txskb(hw, skb); | |
| } | |
| static struct sk_buff *fq_tin_dequeue_func(struct fq *fq, | |
| struct fq_tin *tin, | |
| struct fq_flow *flow) | |
| { | |
| struct ieee80211_local *local; | |
| struct txq_info *txqi; | |
| struct codel_vars *cvars; | |
| struct codel_params *cparams; | |
| struct codel_stats *cstats; | |
| local = container_of(fq, struct ieee80211_local, fq); | |
| txqi = container_of(tin, struct txq_info, tin); | |
| cstats = &txqi->cstats; | |
| if (txqi->txq.sta) { | |
| struct sta_info *sta = container_of(txqi->txq.sta, | |
| struct sta_info, sta); | |
| cparams = &sta->cparams; | |
| } else { | |
| cparams = &local->cparams; | |
| } | |
| if (flow == &txqi->def_flow) | |
| cvars = &txqi->def_cvars; | |
| else | |
| cvars = &local->cvars[flow - fq->flows]; | |
| return codel_dequeue(txqi, | |
| &flow->backlog, | |
| cparams, | |
| cvars, | |
| cstats, | |
| codel_skb_len_func, | |
| codel_skb_time_func, | |
| codel_drop_func, | |
| codel_dequeue_func); | |
| } | |
| static void fq_skb_free_func(struct fq *fq, | |
| struct fq_tin *tin, | |
| struct fq_flow *flow, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local; | |
| local = container_of(fq, struct ieee80211_local, fq); | |
| ieee80211_free_txskb(&local->hw, skb); | |
| } | |
| static struct fq_flow *fq_flow_get_default_func(struct fq *fq, | |
| struct fq_tin *tin, | |
| int idx, | |
| struct sk_buff *skb) | |
| { | |
| struct txq_info *txqi; | |
| txqi = container_of(tin, struct txq_info, tin); | |
| return &txqi->def_flow; | |
| } | |
| static void ieee80211_txq_enqueue(struct ieee80211_local *local, | |
| struct txq_info *txqi, | |
| struct sk_buff *skb) | |
| { | |
| struct fq *fq = &local->fq; | |
| struct fq_tin *tin = &txqi->tin; | |
| ieee80211_set_skb_enqueue_time(skb); | |
| fq_tin_enqueue(fq, tin, skb, | |
| fq_skb_free_func, | |
| fq_flow_get_default_func); | |
| } | |
| void ieee80211_txq_init(struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta, | |
| struct txq_info *txqi, int tid) | |
| { | |
| fq_tin_init(&txqi->tin); | |
| fq_flow_init(&txqi->def_flow); | |
| codel_vars_init(&txqi->def_cvars); | |
| codel_stats_init(&txqi->cstats); | |
| __skb_queue_head_init(&txqi->frags); | |
| txqi->txq.vif = &sdata->vif; | |
| if (sta) { | |
| txqi->txq.sta = &sta->sta; | |
| sta->sta.txq[tid] = &txqi->txq; | |
| txqi->txq.tid = tid; | |
| txqi->txq.ac = ieee80211_ac_from_tid(tid); | |
| } else { | |
| sdata->vif.txq = &txqi->txq; | |
| txqi->txq.tid = 0; | |
| txqi->txq.ac = IEEE80211_AC_BE; | |
| } | |
| } | |
| void ieee80211_txq_purge(struct ieee80211_local *local, | |
| struct txq_info *txqi) | |
| { | |
| struct fq *fq = &local->fq; | |
| struct fq_tin *tin = &txqi->tin; | |
| fq_tin_reset(fq, tin, fq_skb_free_func); | |
| ieee80211_purge_tx_queue(&local->hw, &txqi->frags); | |
| } | |
| int ieee80211_txq_setup_flows(struct ieee80211_local *local) | |
| { | |
| struct fq *fq = &local->fq; | |
| int ret; | |
| int i; | |
| bool supp_vht = false; | |
| enum nl80211_band band; | |
| if (!local->ops->wake_tx_queue) | |
| return 0; | |
| ret = fq_init(fq, 4096); | |
| if (ret) | |
| return ret; | |
| /* | |
| * If the hardware doesn't support VHT, it is safe to limit the maximum | |
| * queue size. 4 Mbytes is 64 max-size aggregates in 802.11n. | |
| */ | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { | |
| struct ieee80211_supported_band *sband; | |
| sband = local->hw.wiphy->bands[band]; | |
| if (!sband) | |
| continue; | |
| supp_vht = supp_vht || sband->vht_cap.vht_supported; | |
| } | |
| if (!supp_vht) | |
| fq->memory_limit = 4 << 20; /* 4 Mbytes */ | |
| codel_params_init(&local->cparams); | |
| local->cparams.interval = MS2TIME(100); | |
| local->cparams.target = MS2TIME(20); | |
| local->cparams.ecn = true; | |
| local->cvars = kcalloc(fq->flows_cnt, sizeof(local->cvars[0]), | |
| GFP_KERNEL); | |
| if (!local->cvars) { | |
| spin_lock_bh(&fq->lock); | |
| fq_reset(fq, fq_skb_free_func); | |
| spin_unlock_bh(&fq->lock); | |
| return -ENOMEM; | |
| } | |
| for (i = 0; i < fq->flows_cnt; i++) | |
| codel_vars_init(&local->cvars[i]); | |
| return 0; | |
| } | |
| void ieee80211_txq_teardown_flows(struct ieee80211_local *local) | |
| { | |
| struct fq *fq = &local->fq; | |
| if (!local->ops->wake_tx_queue) | |
| return; | |
| kfree(local->cvars); | |
| local->cvars = NULL; | |
| spin_lock_bh(&fq->lock); | |
| fq_reset(fq, fq_skb_free_func); | |
| spin_unlock_bh(&fq->lock); | |
| } | |
| static bool ieee80211_queue_skb(struct ieee80211_local *local, | |
| struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta, | |
| struct sk_buff *skb) | |
| { | |
| struct fq *fq = &local->fq; | |
| struct ieee80211_vif *vif; | |
| struct txq_info *txqi; | |
| if (!local->ops->wake_tx_queue || | |
| sdata->vif.type == NL80211_IFTYPE_MONITOR) | |
| return false; | |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| sdata = container_of(sdata->bss, | |
| struct ieee80211_sub_if_data, u.ap); | |
| vif = &sdata->vif; | |
| txqi = ieee80211_get_txq(local, vif, sta, skb); | |
| if (!txqi) | |
| return false; | |
| spin_lock_bh(&fq->lock); | |
| ieee80211_txq_enqueue(local, txqi, skb); | |
| spin_unlock_bh(&fq->lock); | |
| drv_wake_tx_queue(local, txqi); | |
| return true; | |
| } | |
| static bool ieee80211_tx_frags(struct ieee80211_local *local, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_sta *sta, | |
| struct sk_buff_head *skbs, | |
| bool txpending) | |
| { | |
| struct ieee80211_tx_control control = {}; | |
| struct sk_buff *skb, *tmp; | |
| unsigned long flags; | |
| skb_queue_walk_safe(skbs, skb, tmp) { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| int q = info->hw_queue; | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| if (WARN_ON_ONCE(q >= local->hw.queues)) { | |
| __skb_unlink(skb, skbs); | |
| ieee80211_free_txskb(&local->hw, skb); | |
| continue; | |
| } | |
| #endif | |
| spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | |
| if (local->queue_stop_reasons[q] || | |
| (!txpending && !skb_queue_empty(&local->pending[q]))) { | |
| if (unlikely(info->flags & | |
| IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) { | |
| if (local->queue_stop_reasons[q] & | |
| ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL)) { | |
| /* | |
| * Drop off-channel frames if queues | |
| * are stopped for any reason other | |
| * than off-channel operation. Never | |
| * queue them. | |
| */ | |
| spin_unlock_irqrestore( | |
| &local->queue_stop_reason_lock, | |
| flags); | |
| ieee80211_purge_tx_queue(&local->hw, | |
| skbs); | |
| return true; | |
| } | |
| } else { | |
| /* | |
| * Since queue is stopped, queue up frames for | |
| * later transmission from the tx-pending | |
| * tasklet when the queue is woken again. | |
| */ | |
| if (txpending) | |
| skb_queue_splice_init(skbs, | |
| &local->pending[q]); | |
| else | |
| skb_queue_splice_tail_init(skbs, | |
| &local->pending[q]); | |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, | |
| flags); | |
| return false; | |
| } | |
| } | |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | |
| info->control.vif = vif; | |
| control.sta = sta; | |
| __skb_unlink(skb, skbs); | |
| drv_tx(local, &control, skb); | |
| } | |
| return true; | |
| } | |
| /* | |
| * Returns false if the frame couldn't be transmitted but was queued instead. | |
| */ | |
| static bool __ieee80211_tx(struct ieee80211_local *local, | |
| struct sk_buff_head *skbs, int led_len, | |
| struct sta_info *sta, bool txpending) | |
| { | |
| struct ieee80211_tx_info *info; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_vif *vif; | |
| struct ieee80211_sta *pubsta; | |
| struct sk_buff *skb; | |
| bool result = true; | |
| __le16 fc; | |
| if (WARN_ON(skb_queue_empty(skbs))) | |
| return true; | |
| skb = skb_peek(skbs); | |
| fc = ((struct ieee80211_hdr *)skb->data)->frame_control; | |
| info = IEEE80211_SKB_CB(skb); | |
| sdata = vif_to_sdata(info->control.vif); | |
| if (sta && !sta->uploaded) | |
| sta = NULL; | |
| if (sta) | |
| pubsta = &sta->sta; | |
| else | |
| pubsta = NULL; | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_MONITOR: | |
| if (sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) { | |
| vif = &sdata->vif; | |
| break; | |
| } | |
| sdata = rcu_dereference(local->monitor_sdata); | |
| if (sdata) { | |
| vif = &sdata->vif; | |
| info->hw_queue = | |
| vif->hw_queue[skb_get_queue_mapping(skb)]; | |
| } else if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) { | |
| ieee80211_purge_tx_queue(&local->hw, skbs); | |
| return true; | |
| } else | |
| vif = NULL; | |
| break; | |
| case NL80211_IFTYPE_AP_VLAN: | |
| sdata = container_of(sdata->bss, | |
| struct ieee80211_sub_if_data, u.ap); | |
| /* fall through */ | |
| default: | |
| vif = &sdata->vif; | |
| break; | |
| } | |
| result = ieee80211_tx_frags(local, vif, pubsta, skbs, | |
| txpending); | |
| ieee80211_tpt_led_trig_tx(local, fc, led_len); | |
| WARN_ON_ONCE(!skb_queue_empty(skbs)); | |
| return result; | |
| } | |
| /* | |
| * Invoke TX handlers, return 0 on success and non-zero if the | |
| * frame was dropped or queued. | |
| * | |
| * The handlers are split into an early and late part. The latter is everything | |
| * that can be sensitive to reordering, and will be deferred to after packets | |
| * are dequeued from the intermediate queues (when they are enabled). | |
| */ | |
| static int invoke_tx_handlers_early(struct ieee80211_tx_data *tx) | |
| { | |
| ieee80211_tx_result res = TX_DROP; | |
| #define CALL_TXH(txh) \ | |
| do { \ | |
| res = txh(tx); \ | |
| if (res != TX_CONTINUE) \ | |
| goto txh_done; \ | |
| } while (0) | |
| CALL_TXH(ieee80211_tx_h_dynamic_ps); | |
| CALL_TXH(ieee80211_tx_h_check_assoc); | |
| CALL_TXH(ieee80211_tx_h_ps_buf); | |
| CALL_TXH(ieee80211_tx_h_check_control_port_protocol); | |
| CALL_TXH(ieee80211_tx_h_select_key); | |
| if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL)) | |
| CALL_TXH(ieee80211_tx_h_rate_ctrl); | |
| txh_done: | |
| if (unlikely(res == TX_DROP)) { | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop); | |
| if (tx->skb) | |
| ieee80211_free_txskb(&tx->local->hw, tx->skb); | |
| else | |
| ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs); | |
| return -1; | |
| } else if (unlikely(res == TX_QUEUED)) { | |
| I802_DEBUG_INC(tx->local->tx_handlers_queued); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * Late handlers can be called while the sta lock is held. Handlers that can | |
| * cause packets to be generated will cause deadlock! | |
| */ | |
| static int invoke_tx_handlers_late(struct ieee80211_tx_data *tx) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); | |
| ieee80211_tx_result res = TX_CONTINUE; | |
| if (unlikely(info->flags & IEEE80211_TX_INTFL_RETRANSMISSION)) { | |
| __skb_queue_tail(&tx->skbs, tx->skb); | |
| tx->skb = NULL; | |
| goto txh_done; | |
| } | |
| CALL_TXH(ieee80211_tx_h_michael_mic_add); | |
| CALL_TXH(ieee80211_tx_h_sequence); | |
| CALL_TXH(ieee80211_tx_h_fragment); | |
| /* handlers after fragment must be aware of tx info fragmentation! */ | |
| CALL_TXH(ieee80211_tx_h_stats); | |
| CALL_TXH(ieee80211_tx_h_encrypt); | |
| if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL)) | |
| CALL_TXH(ieee80211_tx_h_calculate_duration); | |
| #undef CALL_TXH | |
| txh_done: | |
| if (unlikely(res == TX_DROP)) { | |
| I802_DEBUG_INC(tx->local->tx_handlers_drop); | |
| if (tx->skb) | |
| ieee80211_free_txskb(&tx->local->hw, tx->skb); | |
| else | |
| ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs); | |
| return -1; | |
| } else if (unlikely(res == TX_QUEUED)) { | |
| I802_DEBUG_INC(tx->local->tx_handlers_queued); | |
| return -1; | |
| } | |
| return 0; | |
| } | |
| static int invoke_tx_handlers(struct ieee80211_tx_data *tx) | |
| { | |
| int r = invoke_tx_handlers_early(tx); | |
| if (r) | |
| return r; | |
| return invoke_tx_handlers_late(tx); | |
| } | |
| bool ieee80211_tx_prepare_skb(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, struct sk_buff *skb, | |
| int band, struct ieee80211_sta **sta) | |
| { | |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_tx_data tx; | |
| struct sk_buff *skb2; | |
| if (ieee80211_tx_prepare(sdata, &tx, NULL, skb) == TX_DROP) | |
| return false; | |
| info->band = band; | |
| info->control.vif = vif; | |
| info->hw_queue = vif->hw_queue[skb_get_queue_mapping(skb)]; | |
| if (invoke_tx_handlers(&tx)) | |
| return false; | |
| if (sta) { | |
| if (tx.sta) | |
| *sta = &tx.sta->sta; | |
| else | |
| *sta = NULL; | |
| } | |
| /* this function isn't suitable for fragmented data frames */ | |
| skb2 = __skb_dequeue(&tx.skbs); | |
| if (WARN_ON(skb2 != skb || !skb_queue_empty(&tx.skbs))) { | |
| ieee80211_free_txskb(hw, skb2); | |
| ieee80211_purge_tx_queue(hw, &tx.skbs); | |
| return false; | |
| } | |
| return true; | |
| } | |
| EXPORT_SYMBOL(ieee80211_tx_prepare_skb); | |
| /* | |
| * Returns false if the frame couldn't be transmitted but was queued instead. | |
| */ | |
| static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta, struct sk_buff *skb, | |
| bool txpending) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_tx_data tx; | |
| ieee80211_tx_result res_prepare; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| bool result = true; | |
| int led_len; | |
| if (unlikely(skb->len < 10)) { | |
| dev_kfree_skb(skb); | |
| return true; | |
| } | |
| /* initialises tx */ | |
| led_len = skb->len; | |
| res_prepare = ieee80211_tx_prepare(sdata, &tx, sta, skb); | |
| if (unlikely(res_prepare == TX_DROP)) { | |
| ieee80211_free_txskb(&local->hw, skb); | |
| return true; | |
| } else if (unlikely(res_prepare == TX_QUEUED)) { | |
| return true; | |
| } | |
| /* set up hw_queue value early */ | |
| if (!(info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) || | |
| !ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) | |
| info->hw_queue = | |
| sdata->vif.hw_queue[skb_get_queue_mapping(skb)]; | |
| if (invoke_tx_handlers_early(&tx)) | |
| return true; | |
| if (ieee80211_queue_skb(local, sdata, tx.sta, tx.skb)) | |
| return true; | |
| if (!invoke_tx_handlers_late(&tx)) | |
| result = __ieee80211_tx(local, &tx.skbs, led_len, | |
| tx.sta, txpending); | |
| return result; | |
| } | |
| /* device xmit handlers */ | |
| static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb, | |
| int head_need, bool may_encrypt) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_hdr *hdr; | |
| bool enc_tailroom; | |
| int tail_need = 0; | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| enc_tailroom = may_encrypt && | |
| (sdata->crypto_tx_tailroom_needed_cnt || | |
| ieee80211_is_mgmt(hdr->frame_control)); | |
| if (enc_tailroom) { | |
| tail_need = IEEE80211_ENCRYPT_TAILROOM; | |
| tail_need -= skb_tailroom(skb); | |
| tail_need = max_t(int, tail_need, 0); | |
| } | |
| if (skb_cloned(skb) && | |
| (!ieee80211_hw_check(&local->hw, SUPPORTS_CLONED_SKBS) || | |
| !skb_clone_writable(skb, ETH_HLEN) || enc_tailroom)) | |
| I802_DEBUG_INC(local->tx_expand_skb_head_cloned); | |
| else if (head_need || tail_need) | |
| I802_DEBUG_INC(local->tx_expand_skb_head); | |
| else | |
| return 0; | |
| if (pskb_expand_head(skb, head_need, tail_need, GFP_ATOMIC)) { | |
| wiphy_debug(local->hw.wiphy, | |
| "failed to reallocate TX buffer\n"); | |
| return -ENOMEM; | |
| } | |
| return 0; | |
| } | |
| void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta, struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; | |
| int headroom; | |
| bool may_encrypt; | |
| may_encrypt = !(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT); | |
| headroom = local->tx_headroom; | |
| if (may_encrypt) | |
| headroom += sdata->encrypt_headroom; | |
| headroom -= skb_headroom(skb); | |
| headroom = max_t(int, 0, headroom); | |
| if (ieee80211_skb_resize(sdata, skb, headroom, may_encrypt)) { | |
| ieee80211_free_txskb(&local->hw, skb); | |
| return; | |
| } | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| info->control.vif = &sdata->vif; | |
| if (ieee80211_vif_is_mesh(&sdata->vif)) { | |
| if (ieee80211_is_data(hdr->frame_control) && | |
| is_unicast_ether_addr(hdr->addr1)) { | |
| if (mesh_nexthop_resolve(sdata, skb)) | |
| return; /* skb queued: don't free */ | |
| } else { | |
| ieee80211_mps_set_frame_flags(sdata, NULL, hdr); | |
| } | |
| } | |
| ieee80211_set_qos_hdr(sdata, skb); | |
| ieee80211_tx(sdata, sta, skb, false); | |
| } | |
| static bool ieee80211_parse_tx_radiotap(struct ieee80211_local *local, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_radiotap_iterator iterator; | |
| struct ieee80211_radiotap_header *rthdr = | |
| (struct ieee80211_radiotap_header *) skb->data; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_supported_band *sband = | |
| local->hw.wiphy->bands[info->band]; | |
| int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len, | |
| NULL); | |
| u16 txflags; | |
| u16 rate = 0; | |
| bool rate_found = false; | |
| u8 rate_retries = 0; | |
| u16 rate_flags = 0; | |
| u8 mcs_known, mcs_flags, mcs_bw; | |
| u16 vht_known; | |
| u8 vht_mcs = 0, vht_nss = 0; | |
| int i; | |
| info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | | |
| IEEE80211_TX_CTL_DONTFRAG; | |
| /* | |
| * for every radiotap entry that is present | |
| * (ieee80211_radiotap_iterator_next returns -ENOENT when no more | |
| * entries present, or -EINVAL on error) | |
| */ | |
| while (!ret) { | |
| ret = ieee80211_radiotap_iterator_next(&iterator); | |
| if (ret) | |
| continue; | |
| /* see if this argument is something we can use */ | |
| switch (iterator.this_arg_index) { | |
| /* | |
| * You must take care when dereferencing iterator.this_arg | |
| * for multibyte types... the pointer is not aligned. Use | |
| * get_unaligned((type *)iterator.this_arg) to dereference | |
| * iterator.this_arg for type "type" safely on all arches. | |
| */ | |
| case IEEE80211_RADIOTAP_FLAGS: | |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { | |
| /* | |
| * this indicates that the skb we have been | |
| * handed has the 32-bit FCS CRC at the end... | |
| * we should react to that by snipping it off | |
| * because it will be recomputed and added | |
| * on transmission | |
| */ | |
| if (skb->len < (iterator._max_length + FCS_LEN)) | |
| return false; | |
| skb_trim(skb, skb->len - FCS_LEN); | |
| } | |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) | |
| info->flags &= ~IEEE80211_TX_INTFL_DONT_ENCRYPT; | |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) | |
| info->flags &= ~IEEE80211_TX_CTL_DONTFRAG; | |
| break; | |
| case IEEE80211_RADIOTAP_TX_FLAGS: | |
| txflags = get_unaligned_le16(iterator.this_arg); | |
| if (txflags & IEEE80211_RADIOTAP_F_TX_NOACK) | |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; | |
| break; | |
| case IEEE80211_RADIOTAP_RATE: | |
| rate = *iterator.this_arg; | |
| rate_flags = 0; | |
| rate_found = true; | |
| break; | |
| case IEEE80211_RADIOTAP_DATA_RETRIES: | |
| rate_retries = *iterator.this_arg; | |
| break; | |
| case IEEE80211_RADIOTAP_MCS: | |
| mcs_known = iterator.this_arg[0]; | |
| mcs_flags = iterator.this_arg[1]; | |
| if (!(mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_MCS)) | |
| break; | |
| rate_found = true; | |
| rate = iterator.this_arg[2]; | |
| rate_flags = IEEE80211_TX_RC_MCS; | |
| if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_GI && | |
| mcs_flags & IEEE80211_RADIOTAP_MCS_SGI) | |
| rate_flags |= IEEE80211_TX_RC_SHORT_GI; | |
| mcs_bw = mcs_flags & IEEE80211_RADIOTAP_MCS_BW_MASK; | |
| if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW && | |
| mcs_bw == IEEE80211_RADIOTAP_MCS_BW_40) | |
| rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; | |
| break; | |
| case IEEE80211_RADIOTAP_VHT: | |
| vht_known = get_unaligned_le16(iterator.this_arg); | |
| rate_found = true; | |
| rate_flags = IEEE80211_TX_RC_VHT_MCS; | |
| if ((vht_known & IEEE80211_RADIOTAP_VHT_KNOWN_GI) && | |
| (iterator.this_arg[2] & | |
| IEEE80211_RADIOTAP_VHT_FLAG_SGI)) | |
| rate_flags |= IEEE80211_TX_RC_SHORT_GI; | |
| if (vht_known & | |
| IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH) { | |
| if (iterator.this_arg[3] == 1) | |
| rate_flags |= | |
| IEEE80211_TX_RC_40_MHZ_WIDTH; | |
| else if (iterator.this_arg[3] == 4) | |
| rate_flags |= | |
| IEEE80211_TX_RC_80_MHZ_WIDTH; | |
| else if (iterator.this_arg[3] == 11) | |
| rate_flags |= | |
| IEEE80211_TX_RC_160_MHZ_WIDTH; | |
| } | |
| vht_mcs = iterator.this_arg[4] >> 4; | |
| vht_nss = iterator.this_arg[4] & 0xF; | |
| break; | |
| /* | |
| * Please update the file | |
| * Documentation/networking/mac80211-injection.txt | |
| * when parsing new fields here. | |
| */ | |
| default: | |
| break; | |
| } | |
| } | |
| if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ | |
| return false; | |
| if (rate_found) { | |
| info->control.flags |= IEEE80211_TX_CTRL_RATE_INJECT; | |
| for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { | |
| info->control.rates[i].idx = -1; | |
| info->control.rates[i].flags = 0; | |
| info->control.rates[i].count = 0; | |
| } | |
| if (rate_flags & IEEE80211_TX_RC_MCS) { | |
| info->control.rates[0].idx = rate; | |
| } else if (rate_flags & IEEE80211_TX_RC_VHT_MCS) { | |
| ieee80211_rate_set_vht(info->control.rates, vht_mcs, | |
| vht_nss); | |
| } else { | |
| for (i = 0; i < sband->n_bitrates; i++) { | |
| if (rate * 5 != sband->bitrates[i].bitrate) | |
| continue; | |
| info->control.rates[0].idx = i; | |
| break; | |
| } | |
| } | |
| if (info->control.rates[0].idx < 0) | |
| info->control.flags &= ~IEEE80211_TX_CTRL_RATE_INJECT; | |
| info->control.rates[0].flags = rate_flags; | |
| info->control.rates[0].count = min_t(u8, rate_retries + 1, | |
| local->hw.max_rate_tries); | |
| } | |
| /* | |
| * remove the radiotap header | |
| * iterator->_max_length was sanity-checked against | |
| * skb->len by iterator init | |
| */ | |
| skb_pull(skb, iterator._max_length); | |
| return true; | |
| } | |
| netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| struct ieee80211_radiotap_header *prthdr = | |
| (struct ieee80211_radiotap_header *)skb->data; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr; | |
| struct ieee80211_sub_if_data *tmp_sdata, *sdata; | |
| struct cfg80211_chan_def *chandef; | |
| u16 len_rthdr; | |
| int hdrlen; | |
| /* check for not even having the fixed radiotap header part */ | |
| if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header))) | |
| goto fail; /* too short to be possibly valid */ | |
| /* is it a header version we can trust to find length from? */ | |
| if (unlikely(prthdr->it_version)) | |
| goto fail; /* only version 0 is supported */ | |
| /* then there must be a radiotap header with a length we can use */ | |
| len_rthdr = ieee80211_get_radiotap_len(skb->data); | |
| /* does the skb contain enough to deliver on the alleged length? */ | |
| if (unlikely(skb->len < len_rthdr)) | |
| goto fail; /* skb too short for claimed rt header extent */ | |
| /* | |
| * fix up the pointers accounting for the radiotap | |
| * header still being in there. We are being given | |
| * a precooked IEEE80211 header so no need for | |
| * normal processing | |
| */ | |
| skb_set_mac_header(skb, len_rthdr); | |
| /* | |
| * these are just fixed to the end of the rt area since we | |
| * don't have any better information and at this point, nobody cares | |
| */ | |
| skb_set_network_header(skb, len_rthdr); | |
| skb_set_transport_header(skb, len_rthdr); | |
| if (skb->len < len_rthdr + 2) | |
| goto fail; | |
| hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr); | |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); | |
| if (skb->len < len_rthdr + hdrlen) | |
| goto fail; | |
| /* | |
| * Initialize skb->protocol if the injected frame is a data frame | |
| * carrying a rfc1042 header | |
| */ | |
| if (ieee80211_is_data(hdr->frame_control) && | |
| skb->len >= len_rthdr + hdrlen + sizeof(rfc1042_header) + 2) { | |
| u8 *payload = (u8 *)hdr + hdrlen; | |
| if (ether_addr_equal(payload, rfc1042_header)) | |
| skb->protocol = cpu_to_be16((payload[6] << 8) | | |
| payload[7]); | |
| } | |
| memset(info, 0, sizeof(*info)); | |
| info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS | | |
| IEEE80211_TX_CTL_INJECTED; | |
| rcu_read_lock(); | |
| /* | |
| * We process outgoing injected frames that have a local address | |
| * we handle as though they are non-injected frames. | |
| * This code here isn't entirely correct, the local MAC address | |
| * isn't always enough to find the interface to use; for proper | |
| * VLAN/WDS support we will need a different mechanism (which | |
| * likely isn't going to be monitor interfaces). | |
| */ | |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| list_for_each_entry_rcu(tmp_sdata, &local->interfaces, list) { | |
| if (!ieee80211_sdata_running(tmp_sdata)) | |
| continue; | |
| if (tmp_sdata->vif.type == NL80211_IFTYPE_MONITOR || | |
| tmp_sdata->vif.type == NL80211_IFTYPE_AP_VLAN || | |
| tmp_sdata->vif.type == NL80211_IFTYPE_WDS) | |
| continue; | |
| if (ether_addr_equal(tmp_sdata->vif.addr, hdr->addr2)) { | |
| sdata = tmp_sdata; | |
| break; | |
| } | |
| } | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) { | |
| tmp_sdata = rcu_dereference(local->monitor_sdata); | |
| if (tmp_sdata) | |
| chanctx_conf = | |
| rcu_dereference(tmp_sdata->vif.chanctx_conf); | |
| } | |
| if (chanctx_conf) | |
| chandef = &chanctx_conf->def; | |
| else if (!local->use_chanctx) | |
| chandef = &local->_oper_chandef; | |
| else | |
| goto fail_rcu; | |
| /* | |
| * Frame injection is not allowed if beaconing is not allowed | |
| * or if we need radar detection. Beaconing is usually not allowed when | |
| * the mode or operation (Adhoc, AP, Mesh) does not support DFS. | |
| * Passive scan is also used in world regulatory domains where | |
| * your country is not known and as such it should be treated as | |
| * NO TX unless the channel is explicitly allowed in which case | |
| * your current regulatory domain would not have the passive scan | |
| * flag. | |
| * | |
| * Since AP mode uses monitor interfaces to inject/TX management | |
| * frames we can make AP mode the exception to this rule once it | |
| * supports radar detection as its implementation can deal with | |
| * radar detection by itself. We can do that later by adding a | |
| * monitor flag interfaces used for AP support. | |
| */ | |
| if (!cfg80211_reg_can_beacon(local->hw.wiphy, chandef, | |
| sdata->vif.type)) | |
| goto fail_rcu; | |
| info->band = chandef->chan->band; | |
| /* process and remove the injection radiotap header */ | |
| if (!ieee80211_parse_tx_radiotap(local, skb)) | |
| goto fail_rcu; | |
| ieee80211_xmit(sdata, NULL, skb); | |
| rcu_read_unlock(); | |
| return NETDEV_TX_OK; | |
| fail_rcu: | |
| rcu_read_unlock(); | |
| fail: | |
| dev_kfree_skb(skb); | |
| return NETDEV_TX_OK; /* meaning, we dealt with the skb */ | |
| } | |
| static inline bool ieee80211_is_tdls_setup(struct sk_buff *skb) | |
| { | |
| u16 ethertype = (skb->data[12] << 8) | skb->data[13]; | |
| return ethertype == ETH_P_TDLS && | |
| skb->len > 14 && | |
| skb->data[14] == WLAN_TDLS_SNAP_RFTYPE; | |
| } | |
| static int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb, | |
| struct sta_info **sta_out) | |
| { | |
| struct sta_info *sta; | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP_VLAN: | |
| sta = rcu_dereference(sdata->u.vlan.sta); | |
| if (sta) { | |
| *sta_out = sta; | |
| return 0; | |
| } else if (sdata->wdev.use_4addr) { | |
| return -ENOLINK; | |
| } | |
| /* fall through */ | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_OCB: | |
| case NL80211_IFTYPE_ADHOC: | |
| if (is_multicast_ether_addr(skb->data)) { | |
| *sta_out = ERR_PTR(-ENOENT); | |
| return 0; | |
| } | |
| sta = sta_info_get_bss(sdata, skb->data); | |
| break; | |
| case NL80211_IFTYPE_WDS: | |
| sta = sta_info_get(sdata, sdata->u.wds.remote_addr); | |
| break; | |
| #ifdef CONFIG_MAC80211_MESH | |
| case NL80211_IFTYPE_MESH_POINT: | |
| /* determined much later */ | |
| *sta_out = NULL; | |
| return 0; | |
| #endif | |
| case NL80211_IFTYPE_STATION: | |
| if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) { | |
| sta = sta_info_get(sdata, skb->data); | |
| if (sta && test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | |
| if (test_sta_flag(sta, | |
| WLAN_STA_TDLS_PEER_AUTH)) { | |
| *sta_out = sta; | |
| return 0; | |
| } | |
| /* | |
| * TDLS link during setup - throw out frames to | |
| * peer. Allow TDLS-setup frames to unauthorized | |
| * peers for the special case of a link teardown | |
| * after a TDLS sta is removed due to being | |
| * unreachable. | |
| */ | |
| if (!ieee80211_is_tdls_setup(skb)) | |
| return -EINVAL; | |
| } | |
| } | |
| sta = sta_info_get(sdata, sdata->u.mgd.bssid); | |
| if (!sta) | |
| return -ENOLINK; | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| *sta_out = sta ?: ERR_PTR(-ENOENT); | |
| return 0; | |
| } | |
| /** | |
| * ieee80211_build_hdr - build 802.11 header in the given frame | |
| * @sdata: virtual interface to build the header for | |
| * @skb: the skb to build the header in | |
| * @info_flags: skb flags to set | |
| * | |
| * This function takes the skb with 802.3 header and reformats the header to | |
| * the appropriate IEEE 802.11 header based on which interface the packet is | |
| * being transmitted on. | |
| * | |
| * Note that this function also takes care of the TX status request and | |
| * potential unsharing of the SKB - this needs to be interleaved with the | |
| * header building. | |
| * | |
| * The function requires the read-side RCU lock held | |
| * | |
| * Returns: the (possibly reallocated) skb or an ERR_PTR() code | |
| */ | |
| static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb, u32 info_flags, | |
| struct sta_info *sta) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_tx_info *info; | |
| int head_need; | |
| u16 ethertype, hdrlen, meshhdrlen = 0; | |
| __le16 fc; | |
| struct ieee80211_hdr hdr; | |
| struct ieee80211s_hdr mesh_hdr __maybe_unused; | |
| struct mesh_path __maybe_unused *mppath = NULL, *mpath = NULL; | |
| const u8 *encaps_data; | |
| int encaps_len, skip_header_bytes; | |
| bool wme_sta = false, authorized = false; | |
| bool tdls_peer; | |
| bool multicast; | |
| u16 info_id = 0; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| struct ieee80211_sub_if_data *ap_sdata; | |
| enum nl80211_band band; | |
| int ret; | |
| if (IS_ERR(sta)) | |
| sta = NULL; | |
| /* convert Ethernet header to proper 802.11 header (based on | |
| * operation mode) */ | |
| ethertype = (skb->data[12] << 8) | skb->data[13]; | |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP_VLAN: | |
| if (sdata->wdev.use_4addr) { | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | |
| /* RA TA DA SA */ | |
| memcpy(hdr.addr1, sta->sta.addr, ETH_ALEN); | |
| memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | |
| hdrlen = 30; | |
| authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); | |
| wme_sta = sta->sta.wme; | |
| } | |
| ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, | |
| u.ap); | |
| chanctx_conf = rcu_dereference(ap_sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) { | |
| ret = -ENOTCONN; | |
| goto free; | |
| } | |
| band = chanctx_conf->def.chan->band; | |
| if (sdata->wdev.use_4addr) | |
| break; | |
| /* fall through */ | |
| case NL80211_IFTYPE_AP: | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) { | |
| ret = -ENOTCONN; | |
| goto free; | |
| } | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | |
| /* DA BSSID SA */ | |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); | |
| hdrlen = 24; | |
| band = chanctx_conf->def.chan->band; | |
| break; | |
| case NL80211_IFTYPE_WDS: | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); | |
| /* RA TA DA SA */ | |
| memcpy(hdr.addr1, sdata->u.wds.remote_addr, ETH_ALEN); | |
| memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | |
| hdrlen = 30; | |
| /* | |
| * This is the exception! WDS style interfaces are prohibited | |
| * when channel contexts are in used so this must be valid | |
| */ | |
| band = local->hw.conf.chandef.chan->band; | |
| break; | |
| #ifdef CONFIG_MAC80211_MESH | |
| case NL80211_IFTYPE_MESH_POINT: | |
| if (!is_multicast_ether_addr(skb->data)) { | |
| struct sta_info *next_hop; | |
| bool mpp_lookup = true; | |
| mpath = mesh_path_lookup(sdata, skb->data); | |
| if (mpath) { | |
| mpp_lookup = false; | |
| next_hop = rcu_dereference(mpath->next_hop); | |
| if (!next_hop || | |
| !(mpath->flags & (MESH_PATH_ACTIVE | | |
| MESH_PATH_RESOLVING))) | |
| mpp_lookup = true; | |
| } | |
| if (mpp_lookup) { | |
| mppath = mpp_path_lookup(sdata, skb->data); | |
| if (mppath) | |
| mppath->exp_time = jiffies; | |
| } | |
| if (mppath && mpath) | |
| mesh_path_del(sdata, mpath->dst); | |
| } | |
| /* | |
| * Use address extension if it is a packet from | |
| * another interface or if we know the destination | |
| * is being proxied by a portal (i.e. portal address | |
| * differs from proxied address) | |
| */ | |
| if (ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN) && | |
| !(mppath && !ether_addr_equal(mppath->mpp, skb->data))) { | |
| hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, | |
| skb->data, skb->data + ETH_ALEN); | |
| meshhdrlen = ieee80211_new_mesh_header(sdata, &mesh_hdr, | |
| NULL, NULL); | |
| } else { | |
| /* DS -> MBSS (802.11-2012 13.11.3.3). | |
| * For unicast with unknown forwarding information, | |
| * destination might be in the MBSS or if that fails | |
| * forwarded to another mesh gate. In either case | |
| * resolution will be handled in ieee80211_xmit(), so | |
| * leave the original DA. This also works for mcast */ | |
| const u8 *mesh_da = skb->data; | |
| if (mppath) | |
| mesh_da = mppath->mpp; | |
| else if (mpath) | |
| mesh_da = mpath->dst; | |
| hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, | |
| mesh_da, sdata->vif.addr); | |
| if (is_multicast_ether_addr(mesh_da)) | |
| /* DA TA mSA AE:SA */ | |
| meshhdrlen = ieee80211_new_mesh_header( | |
| sdata, &mesh_hdr, | |
| skb->data + ETH_ALEN, NULL); | |
| else | |
| /* RA TA mDA mSA AE:DA SA */ | |
| meshhdrlen = ieee80211_new_mesh_header( | |
| sdata, &mesh_hdr, skb->data, | |
| skb->data + ETH_ALEN); | |
| } | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) { | |
| ret = -ENOTCONN; | |
| goto free; | |
| } | |
| band = chanctx_conf->def.chan->band; | |
| break; | |
| #endif | |
| case NL80211_IFTYPE_STATION: | |
| /* we already did checks when looking up the RA STA */ | |
| tdls_peer = test_sta_flag(sta, WLAN_STA_TDLS_PEER); | |
| if (tdls_peer) { | |
| /* DA SA BSSID */ | |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | |
| memcpy(hdr.addr3, sdata->u.mgd.bssid, ETH_ALEN); | |
| hdrlen = 24; | |
| } else if (sdata->u.mgd.use_4addr && | |
| cpu_to_be16(ethertype) != sdata->control_port_protocol) { | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | | |
| IEEE80211_FCTL_TODS); | |
| /* RA TA DA SA */ | |
| memcpy(hdr.addr1, sdata->u.mgd.bssid, ETH_ALEN); | |
| memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); | |
| hdrlen = 30; | |
| } else { | |
| fc |= cpu_to_le16(IEEE80211_FCTL_TODS); | |
| /* BSSID SA DA */ | |
| memcpy(hdr.addr1, sdata->u.mgd.bssid, ETH_ALEN); | |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); | |
| hdrlen = 24; | |
| } | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) { | |
| ret = -ENOTCONN; | |
| goto free; | |
| } | |
| band = chanctx_conf->def.chan->band; | |
| break; | |
| case NL80211_IFTYPE_OCB: | |
| /* DA SA BSSID */ | |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | |
| eth_broadcast_addr(hdr.addr3); | |
| hdrlen = 24; | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) { | |
| ret = -ENOTCONN; | |
| goto free; | |
| } | |
| band = chanctx_conf->def.chan->band; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| /* DA SA BSSID */ | |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); | |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); | |
| memcpy(hdr.addr3, sdata->u.ibss.bssid, ETH_ALEN); | |
| hdrlen = 24; | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) { | |
| ret = -ENOTCONN; | |
| goto free; | |
| } | |
| band = chanctx_conf->def.chan->band; | |
| break; | |
| default: | |
| ret = -EINVAL; | |
| goto free; | |
| } | |
| multicast = is_multicast_ether_addr(hdr.addr1); | |
| /* sta is always NULL for mesh */ | |
| if (sta) { | |
| authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); | |
| wme_sta = sta->sta.wme; | |
| } else if (ieee80211_vif_is_mesh(&sdata->vif)) { | |
| /* For mesh, the use of the QoS header is mandatory */ | |
| wme_sta = true; | |
| } | |
| /* receiver does QoS (which also means we do) use it */ | |
| if (wme_sta) { | |
| fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | |
| hdrlen += 2; | |
| } | |
| /* | |
| * Drop unicast frames to unauthorised stations unless they are | |
| * EAPOL frames from the local station. | |
| */ | |
| if (unlikely(!ieee80211_vif_is_mesh(&sdata->vif) && | |
| (sdata->vif.type != NL80211_IFTYPE_OCB) && | |
| !multicast && !authorized && | |
| (cpu_to_be16(ethertype) != sdata->control_port_protocol || | |
| !ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN)))) { | |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG | |
| net_info_ratelimited("%s: dropped frame to %pM (unauthorized port)\n", | |
| sdata->name, hdr.addr1); | |
| #endif | |
| I802_DEBUG_INC(local->tx_handlers_drop_unauth_port); | |
| ret = -EPERM; | |
| goto free; | |
| } | |
| if (unlikely(!multicast && skb->sk && | |
| skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS)) { | |
| struct sk_buff *ack_skb = skb_clone_sk(skb); | |
| if (ack_skb) { | |
| unsigned long flags; | |
| int id; | |
| spin_lock_irqsave(&local->ack_status_lock, flags); | |
| id = idr_alloc(&local->ack_status_frames, ack_skb, | |
| 1, 0x10000, GFP_ATOMIC); | |
| spin_unlock_irqrestore(&local->ack_status_lock, flags); | |
| if (id >= 0) { | |
| info_id = id; | |
| info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; | |
| } else { | |
| kfree_skb(ack_skb); | |
| } | |
| } | |
| } | |
| /* | |
| * If the skb is shared we need to obtain our own copy. | |
| */ | |
| if (skb_shared(skb)) { | |
| struct sk_buff *tmp_skb = skb; | |
| /* can't happen -- skb is a clone if info_id != 0 */ | |
| WARN_ON(info_id); | |
| skb = skb_clone(skb, GFP_ATOMIC); | |
| kfree_skb(tmp_skb); | |
| if (!skb) { | |
| ret = -ENOMEM; | |
| goto free; | |
| } | |
| } | |
| hdr.frame_control = fc; | |
| hdr.duration_id = 0; | |
| hdr.seq_ctrl = 0; | |
| skip_header_bytes = ETH_HLEN; | |
| if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { | |
| encaps_data = bridge_tunnel_header; | |
| encaps_len = sizeof(bridge_tunnel_header); | |
| skip_header_bytes -= 2; | |
| } else if (ethertype >= ETH_P_802_3_MIN) { | |
| encaps_data = rfc1042_header; | |
| encaps_len = sizeof(rfc1042_header); | |
| skip_header_bytes -= 2; | |
| } else { | |
| encaps_data = NULL; | |
| encaps_len = 0; | |
| } | |
| skb_pull(skb, skip_header_bytes); | |
| head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb); | |
| /* | |
| * So we need to modify the skb header and hence need a copy of | |
| * that. The head_need variable above doesn't, so far, include | |
| * the needed header space that we don't need right away. If we | |
| * can, then we don't reallocate right now but only after the | |
| * frame arrives at the master device (if it does...) | |
| * | |
| * If we cannot, however, then we will reallocate to include all | |
| * the ever needed space. Also, if we need to reallocate it anyway, | |
| * make it big enough for everything we may ever need. | |
| */ | |
| if (head_need > 0 || skb_cloned(skb)) { | |
| head_need += sdata->encrypt_headroom; | |
| head_need += local->tx_headroom; | |
| head_need = max_t(int, 0, head_need); | |
| if (ieee80211_skb_resize(sdata, skb, head_need, true)) { | |
| ieee80211_free_txskb(&local->hw, skb); | |
| skb = NULL; | |
| return ERR_PTR(-ENOMEM); | |
| } | |
| } | |
| if (encaps_data) | |
| memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); | |
| #ifdef CONFIG_MAC80211_MESH | |
| if (meshhdrlen > 0) | |
| memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen); | |
| #endif | |
| if (ieee80211_is_data_qos(fc)) { | |
| __le16 *qos_control; | |
| qos_control = skb_push(skb, 2); | |
| memcpy(skb_push(skb, hdrlen - 2), &hdr, hdrlen - 2); | |
| /* | |
| * Maybe we could actually set some fields here, for now just | |
| * initialise to zero to indicate no special operation. | |
| */ | |
| *qos_control = 0; | |
| } else | |
| memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); | |
| skb_reset_mac_header(skb); | |
| info = IEEE80211_SKB_CB(skb); | |
| memset(info, 0, sizeof(*info)); | |
| info->flags = info_flags; | |
| info->ack_frame_id = info_id; | |
| info->band = band; | |
| return skb; | |
| free: | |
| kfree_skb(skb); | |
| return ERR_PTR(ret); | |
| } | |
| /* | |
| * fast-xmit overview | |
| * | |
| * The core idea of this fast-xmit is to remove per-packet checks by checking | |
| * them out of band. ieee80211_check_fast_xmit() implements the out-of-band | |
| * checks that are needed to get the sta->fast_tx pointer assigned, after which | |
| * much less work can be done per packet. For example, fragmentation must be | |
| * disabled or the fast_tx pointer will not be set. All the conditions are seen | |
| * in the code here. | |
| * | |
| * Once assigned, the fast_tx data structure also caches the per-packet 802.11 | |
| * header and other data to aid packet processing in ieee80211_xmit_fast(). | |
| * | |
| * The most difficult part of this is that when any of these assumptions | |
| * change, an external trigger (i.e. a call to ieee80211_clear_fast_xmit(), | |
| * ieee80211_check_fast_xmit() or friends) is required to reset the data, | |
| * since the per-packet code no longer checks the conditions. This is reflected | |
| * by the calls to these functions throughout the rest of the code, and must be | |
| * maintained if any of the TX path checks change. | |
| */ | |
| void ieee80211_check_fast_xmit(struct sta_info *sta) | |
| { | |
| struct ieee80211_fast_tx build = {}, *fast_tx = NULL, *old; | |
| struct ieee80211_local *local = sta->local; | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| struct ieee80211_hdr *hdr = (void *)build.hdr; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| __le16 fc; | |
| if (!ieee80211_hw_check(&local->hw, SUPPORT_FAST_XMIT)) | |
| return; | |
| /* Locking here protects both the pointer itself, and against concurrent | |
| * invocations winning data access races to, e.g., the key pointer that | |
| * is used. | |
| * Without it, the invocation of this function right after the key | |
| * pointer changes wouldn't be sufficient, as another CPU could access | |
| * the pointer, then stall, and then do the cache update after the CPU | |
| * that invalidated the key. | |
| * With the locking, such scenarios cannot happen as the check for the | |
| * key and the fast-tx assignment are done atomically, so the CPU that | |
| * modifies the key will either wait or other one will see the key | |
| * cleared/changed already. | |
| */ | |
| spin_lock_bh(&sta->lock); | |
| if (ieee80211_hw_check(&local->hw, SUPPORTS_PS) && | |
| !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS) && | |
| sdata->vif.type == NL80211_IFTYPE_STATION) | |
| goto out; | |
| if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED)) | |
| goto out; | |
| if (test_sta_flag(sta, WLAN_STA_PS_STA) || | |
| test_sta_flag(sta, WLAN_STA_PS_DRIVER) || | |
| test_sta_flag(sta, WLAN_STA_PS_DELIVER) || | |
| test_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT)) | |
| goto out; | |
| if (sdata->noack_map) | |
| goto out; | |
| /* fast-xmit doesn't handle fragmentation at all */ | |
| if (local->hw.wiphy->frag_threshold != (u32)-1 && | |
| !ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG)) | |
| goto out; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) { | |
| rcu_read_unlock(); | |
| goto out; | |
| } | |
| build.band = chanctx_conf->def.chan->band; | |
| rcu_read_unlock(); | |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_ADHOC: | |
| /* DA SA BSSID */ | |
| build.da_offs = offsetof(struct ieee80211_hdr, addr1); | |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr2); | |
| memcpy(hdr->addr3, sdata->u.ibss.bssid, ETH_ALEN); | |
| build.hdr_len = 24; | |
| break; | |
| case NL80211_IFTYPE_STATION: | |
| if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { | |
| /* DA SA BSSID */ | |
| build.da_offs = offsetof(struct ieee80211_hdr, addr1); | |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr2); | |
| memcpy(hdr->addr3, sdata->u.mgd.bssid, ETH_ALEN); | |
| build.hdr_len = 24; | |
| break; | |
| } | |
| if (sdata->u.mgd.use_4addr) { | |
| /* non-regular ethertype cannot use the fastpath */ | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | | |
| IEEE80211_FCTL_TODS); | |
| /* RA TA DA SA */ | |
| memcpy(hdr->addr1, sdata->u.mgd.bssid, ETH_ALEN); | |
| memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); | |
| build.da_offs = offsetof(struct ieee80211_hdr, addr3); | |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr4); | |
| build.hdr_len = 30; | |
| break; | |
| } | |
| fc |= cpu_to_le16(IEEE80211_FCTL_TODS); | |
| /* BSSID SA DA */ | |
| memcpy(hdr->addr1, sdata->u.mgd.bssid, ETH_ALEN); | |
| build.da_offs = offsetof(struct ieee80211_hdr, addr3); | |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr2); | |
| build.hdr_len = 24; | |
| break; | |
| case NL80211_IFTYPE_AP_VLAN: | |
| if (sdata->wdev.use_4addr) { | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | | |
| IEEE80211_FCTL_TODS); | |
| /* RA TA DA SA */ | |
| memcpy(hdr->addr1, sta->sta.addr, ETH_ALEN); | |
| memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); | |
| build.da_offs = offsetof(struct ieee80211_hdr, addr3); | |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr4); | |
| build.hdr_len = 30; | |
| break; | |
| } | |
| /* fall through */ | |
| case NL80211_IFTYPE_AP: | |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); | |
| /* DA BSSID SA */ | |
| build.da_offs = offsetof(struct ieee80211_hdr, addr1); | |
| memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); | |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr3); | |
| build.hdr_len = 24; | |
| break; | |
| default: | |
| /* not handled on fast-xmit */ | |
| goto out; | |
| } | |
| if (sta->sta.wme) { | |
| build.hdr_len += 2; | |
| fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); | |
| } | |
| /* We store the key here so there's no point in using rcu_dereference() | |
| * but that's fine because the code that changes the pointers will call | |
| * this function after doing so. For a single CPU that would be enough, | |
| * for multiple see the comment above. | |
| */ | |
| build.key = rcu_access_pointer(sta->ptk[sta->ptk_idx]); | |
| if (!build.key) | |
| build.key = rcu_access_pointer(sdata->default_unicast_key); | |
| if (build.key) { | |
| bool gen_iv, iv_spc, mmic; | |
| gen_iv = build.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV; | |
| iv_spc = build.key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE; | |
| mmic = build.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_MMIC; | |
| /* don't handle software crypto */ | |
| if (!(build.key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) | |
| goto out; | |
| switch (build.key->conf.cipher) { | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| case WLAN_CIPHER_SUITE_CCMP_256: | |
| /* add fixed key ID */ | |
| if (gen_iv) { | |
| (build.hdr + build.hdr_len)[3] = | |
| 0x20 | (build.key->conf.keyidx << 6); | |
| build.pn_offs = build.hdr_len; | |
| } | |
| if (gen_iv || iv_spc) | |
| build.hdr_len += IEEE80211_CCMP_HDR_LEN; | |
| break; | |
| case WLAN_CIPHER_SUITE_GCMP: | |
| case WLAN_CIPHER_SUITE_GCMP_256: | |
| /* add fixed key ID */ | |
| if (gen_iv) { | |
| (build.hdr + build.hdr_len)[3] = | |
| 0x20 | (build.key->conf.keyidx << 6); | |
| build.pn_offs = build.hdr_len; | |
| } | |
| if (gen_iv || iv_spc) | |
| build.hdr_len += IEEE80211_GCMP_HDR_LEN; | |
| break; | |
| case WLAN_CIPHER_SUITE_TKIP: | |
| /* cannot handle MMIC or IV generation in xmit-fast */ | |
| if (mmic || gen_iv) | |
| goto out; | |
| if (iv_spc) | |
| build.hdr_len += IEEE80211_TKIP_IV_LEN; | |
| break; | |
| case WLAN_CIPHER_SUITE_WEP40: | |
| case WLAN_CIPHER_SUITE_WEP104: | |
| /* cannot handle IV generation in fast-xmit */ | |
| if (gen_iv) | |
| goto out; | |
| if (iv_spc) | |
| build.hdr_len += IEEE80211_WEP_IV_LEN; | |
| break; | |
| case WLAN_CIPHER_SUITE_AES_CMAC: | |
| case WLAN_CIPHER_SUITE_BIP_CMAC_256: | |
| case WLAN_CIPHER_SUITE_BIP_GMAC_128: | |
| case WLAN_CIPHER_SUITE_BIP_GMAC_256: | |
| WARN(1, | |
| "management cipher suite 0x%x enabled for data\n", | |
| build.key->conf.cipher); | |
| goto out; | |
| default: | |
| /* we don't know how to generate IVs for this at all */ | |
| if (WARN_ON(gen_iv)) | |
| goto out; | |
| /* pure hardware keys are OK, of course */ | |
| if (!(build.key->flags & KEY_FLAG_CIPHER_SCHEME)) | |
| break; | |
| /* cipher scheme might require space allocation */ | |
| if (iv_spc && | |
| build.key->conf.iv_len > IEEE80211_FAST_XMIT_MAX_IV) | |
| goto out; | |
| if (iv_spc) | |
| build.hdr_len += build.key->conf.iv_len; | |
| } | |
| fc |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); | |
| } | |
| hdr->frame_control = fc; | |
| memcpy(build.hdr + build.hdr_len, | |
| rfc1042_header, sizeof(rfc1042_header)); | |
| build.hdr_len += sizeof(rfc1042_header); | |
| fast_tx = kmemdup(&build, sizeof(build), GFP_ATOMIC); | |
| /* if the kmemdup fails, continue w/o fast_tx */ | |
| if (!fast_tx) | |
| goto out; | |
| out: | |
| /* we might have raced against another call to this function */ | |
| old = rcu_dereference_protected(sta->fast_tx, | |
| lockdep_is_held(&sta->lock)); | |
| rcu_assign_pointer(sta->fast_tx, fast_tx); | |
| if (old) | |
| kfree_rcu(old, rcu_head); | |
| spin_unlock_bh(&sta->lock); | |
| } | |
| void ieee80211_check_fast_xmit_all(struct ieee80211_local *local) | |
| { | |
| struct sta_info *sta; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sta, &local->sta_list, list) | |
| ieee80211_check_fast_xmit(sta); | |
| rcu_read_unlock(); | |
| } | |
| void ieee80211_check_fast_xmit_iface(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sta, &local->sta_list, list) { | |
| if (sdata != sta->sdata && | |
| (!sta->sdata->bss || sta->sdata->bss != sdata->bss)) | |
| continue; | |
| ieee80211_check_fast_xmit(sta); | |
| } | |
| rcu_read_unlock(); | |
| } | |
| void ieee80211_clear_fast_xmit(struct sta_info *sta) | |
| { | |
| struct ieee80211_fast_tx *fast_tx; | |
| spin_lock_bh(&sta->lock); | |
| fast_tx = rcu_dereference_protected(sta->fast_tx, | |
| lockdep_is_held(&sta->lock)); | |
| RCU_INIT_POINTER(sta->fast_tx, NULL); | |
| spin_unlock_bh(&sta->lock); | |
| if (fast_tx) | |
| kfree_rcu(fast_tx, rcu_head); | |
| } | |
| static bool ieee80211_amsdu_realloc_pad(struct ieee80211_local *local, | |
| struct sk_buff *skb, int headroom) | |
| { | |
| if (skb_headroom(skb) < headroom) { | |
| I802_DEBUG_INC(local->tx_expand_skb_head); | |
| if (pskb_expand_head(skb, headroom, 0, GFP_ATOMIC)) { | |
| wiphy_debug(local->hw.wiphy, | |
| "failed to reallocate TX buffer\n"); | |
| return false; | |
| } | |
| } | |
| return true; | |
| } | |
| static bool ieee80211_amsdu_prepare_head(struct ieee80211_sub_if_data *sdata, | |
| struct ieee80211_fast_tx *fast_tx, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr; | |
| struct ethhdr *amsdu_hdr; | |
| int hdr_len = fast_tx->hdr_len - sizeof(rfc1042_header); | |
| int subframe_len = skb->len - hdr_len; | |
| void *data; | |
| u8 *qc, *h_80211_src, *h_80211_dst; | |
| const u8 *bssid; | |
| if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) | |
| return false; | |
| if (info->control.flags & IEEE80211_TX_CTRL_AMSDU) | |
| return true; | |
| if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(*amsdu_hdr))) | |
| return false; | |
| data = skb_push(skb, sizeof(*amsdu_hdr)); | |
| memmove(data, data + sizeof(*amsdu_hdr), hdr_len); | |
| hdr = data; | |
| amsdu_hdr = data + hdr_len; | |
| /* h_80211_src/dst is addr* field within hdr */ | |
| h_80211_src = data + fast_tx->sa_offs; | |
| h_80211_dst = data + fast_tx->da_offs; | |
| amsdu_hdr->h_proto = cpu_to_be16(subframe_len); | |
| ether_addr_copy(amsdu_hdr->h_source, h_80211_src); | |
| ether_addr_copy(amsdu_hdr->h_dest, h_80211_dst); | |
| /* according to IEEE 802.11-2012 8.3.2 table 8-19, the outer SA/DA | |
| * fields needs to be changed to BSSID for A-MSDU frames depending | |
| * on FromDS/ToDS values. | |
| */ | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_STATION: | |
| bssid = sdata->u.mgd.bssid; | |
| break; | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_AP_VLAN: | |
| bssid = sdata->vif.addr; | |
| break; | |
| default: | |
| bssid = NULL; | |
| } | |
| if (bssid && ieee80211_has_fromds(hdr->frame_control)) | |
| ether_addr_copy(h_80211_src, bssid); | |
| if (bssid && ieee80211_has_tods(hdr->frame_control)) | |
| ether_addr_copy(h_80211_dst, bssid); | |
| qc = ieee80211_get_qos_ctl(hdr); | |
| *qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT; | |
| info->control.flags |= IEEE80211_TX_CTRL_AMSDU; | |
| return true; | |
| } | |
| static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta, | |
| struct ieee80211_fast_tx *fast_tx, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct fq *fq = &local->fq; | |
| struct fq_tin *tin; | |
| struct fq_flow *flow; | |
| u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | |
| struct ieee80211_txq *txq = sta->sta.txq[tid]; | |
| struct txq_info *txqi; | |
| struct sk_buff **frag_tail, *head; | |
| int subframe_len = skb->len - ETH_ALEN; | |
| u8 max_subframes = sta->sta.max_amsdu_subframes; | |
| int max_frags = local->hw.max_tx_fragments; | |
| int max_amsdu_len = sta->sta.max_amsdu_len; | |
| __be16 len; | |
| void *data; | |
| bool ret = false; | |
| unsigned int orig_len; | |
| int n = 2, nfrags, pad = 0; | |
| u16 hdrlen; | |
| if (!ieee80211_hw_check(&local->hw, TX_AMSDU)) | |
| return false; | |
| if (!txq) | |
| return false; | |
| txqi = to_txq_info(txq); | |
| if (test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags)) | |
| return false; | |
| if (sta->sta.max_rc_amsdu_len) | |
| max_amsdu_len = min_t(int, max_amsdu_len, | |
| sta->sta.max_rc_amsdu_len); | |
| spin_lock_bh(&fq->lock); | |
| /* TODO: Ideally aggregation should be done on dequeue to remain | |
| * responsive to environment changes. | |
| */ | |
| tin = &txqi->tin; | |
| flow = fq_flow_classify(fq, tin, skb, fq_flow_get_default_func); | |
| head = skb_peek_tail(&flow->queue); | |
| if (!head) | |
| goto out; | |
| orig_len = head->len; | |
| if (skb->len + head->len > max_amsdu_len) | |
| goto out; | |
| nfrags = 1 + skb_shinfo(skb)->nr_frags; | |
| nfrags += 1 + skb_shinfo(head)->nr_frags; | |
| frag_tail = &skb_shinfo(head)->frag_list; | |
| while (*frag_tail) { | |
| nfrags += 1 + skb_shinfo(*frag_tail)->nr_frags; | |
| frag_tail = &(*frag_tail)->next; | |
| n++; | |
| } | |
| if (max_subframes && n > max_subframes) | |
| goto out; | |
| if (max_frags && nfrags > max_frags) | |
| goto out; | |
| if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head)) | |
| goto out; | |
| /* | |
| * Pad out the previous subframe to a multiple of 4 by adding the | |
| * padding to the next one, that's being added. Note that head->len | |
| * is the length of the full A-MSDU, but that works since each time | |
| * we add a new subframe we pad out the previous one to a multiple | |
| * of 4 and thus it no longer matters in the next round. | |
| */ | |
| hdrlen = fast_tx->hdr_len - sizeof(rfc1042_header); | |
| if ((head->len - hdrlen) & 3) | |
| pad = 4 - ((head->len - hdrlen) & 3); | |
| if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(rfc1042_header) + | |
| 2 + pad)) | |
| goto out_recalc; | |
| ret = true; | |
| data = skb_push(skb, ETH_ALEN + 2); | |
| memmove(data, data + ETH_ALEN + 2, 2 * ETH_ALEN); | |
| data += 2 * ETH_ALEN; | |
| len = cpu_to_be16(subframe_len); | |
| memcpy(data, &len, 2); | |
| memcpy(data + 2, rfc1042_header, sizeof(rfc1042_header)); | |
| memset(skb_push(skb, pad), 0, pad); | |
| head->len += skb->len; | |
| head->data_len += skb->len; | |
| *frag_tail = skb; | |
| out_recalc: | |
| if (head->len != orig_len) { | |
| flow->backlog += head->len - orig_len; | |
| tin->backlog_bytes += head->len - orig_len; | |
| fq_recalc_backlog(fq, tin, flow); | |
| } | |
| out: | |
| spin_unlock_bh(&fq->lock); | |
| return ret; | |
| } | |
| /* | |
| * Can be called while the sta lock is held. Anything that can cause packets to | |
| * be generated will cause deadlock! | |
| */ | |
| static void ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta, u8 pn_offs, | |
| struct ieee80211_key *key, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr = (void *)skb->data; | |
| u8 tid = IEEE80211_NUM_TIDS; | |
| if (key) | |
| info->control.hw_key = &key->conf; | |
| ieee80211_tx_stats(skb->dev, skb->len); | |
| if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { | |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | |
| hdr->seq_ctrl = ieee80211_tx_next_seq(sta, tid); | |
| } else { | |
| info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; | |
| hdr->seq_ctrl = cpu_to_le16(sdata->sequence_number); | |
| sdata->sequence_number += 0x10; | |
| } | |
| if (skb_shinfo(skb)->gso_size) | |
| sta->tx_stats.msdu[tid] += | |
| DIV_ROUND_UP(skb->len, skb_shinfo(skb)->gso_size); | |
| else | |
| sta->tx_stats.msdu[tid]++; | |
| info->hw_queue = sdata->vif.hw_queue[skb_get_queue_mapping(skb)]; | |
| /* statistics normally done by ieee80211_tx_h_stats (but that | |
| * has to consider fragmentation, so is more complex) | |
| */ | |
| sta->tx_stats.bytes[skb_get_queue_mapping(skb)] += skb->len; | |
| sta->tx_stats.packets[skb_get_queue_mapping(skb)]++; | |
| if (pn_offs) { | |
| u64 pn; | |
| u8 *crypto_hdr = skb->data + pn_offs; | |
| switch (key->conf.cipher) { | |
| case WLAN_CIPHER_SUITE_CCMP: | |
| case WLAN_CIPHER_SUITE_CCMP_256: | |
| case WLAN_CIPHER_SUITE_GCMP: | |
| case WLAN_CIPHER_SUITE_GCMP_256: | |
| pn = atomic64_inc_return(&key->conf.tx_pn); | |
| crypto_hdr[0] = pn; | |
| crypto_hdr[1] = pn >> 8; | |
| crypto_hdr[4] = pn >> 16; | |
| crypto_hdr[5] = pn >> 24; | |
| crypto_hdr[6] = pn >> 32; | |
| crypto_hdr[7] = pn >> 40; | |
| break; | |
| } | |
| } | |
| } | |
| static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta, | |
| struct ieee80211_fast_tx *fast_tx, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| u16 ethertype = (skb->data[12] << 8) | skb->data[13]; | |
| int extra_head = fast_tx->hdr_len - (ETH_HLEN - 2); | |
| int hw_headroom = sdata->local->hw.extra_tx_headroom; | |
| struct ethhdr eth; | |
| struct ieee80211_tx_info *info; | |
| struct ieee80211_hdr *hdr = (void *)fast_tx->hdr; | |
| struct ieee80211_tx_data tx; | |
| ieee80211_tx_result r; | |
| struct tid_ampdu_tx *tid_tx = NULL; | |
| u8 tid = IEEE80211_NUM_TIDS; | |
| /* control port protocol needs a lot of special handling */ | |
| if (cpu_to_be16(ethertype) == sdata->control_port_protocol) | |
| return false; | |
| /* only RFC 1042 SNAP */ | |
| if (ethertype < ETH_P_802_3_MIN) | |
| return false; | |
| /* don't handle TX status request here either */ | |
| if (skb->sk && skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS) | |
| return false; | |
| if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { | |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | |
| tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); | |
| if (tid_tx) { | |
| if (!test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) | |
| return false; | |
| if (tid_tx->timeout) | |
| tid_tx->last_tx = jiffies; | |
| } | |
| } | |
| /* after this point (skb is modified) we cannot return false */ | |
| if (skb_shared(skb)) { | |
| struct sk_buff *tmp_skb = skb; | |
| skb = skb_clone(skb, GFP_ATOMIC); | |
| kfree_skb(tmp_skb); | |
| if (!skb) | |
| return true; | |
| } | |
| if ((hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) && | |
| ieee80211_amsdu_aggregate(sdata, sta, fast_tx, skb)) | |
| return true; | |
| /* will not be crypto-handled beyond what we do here, so use false | |
| * as the may-encrypt argument for the resize to not account for | |
| * more room than we already have in 'extra_head' | |
| */ | |
| if (unlikely(ieee80211_skb_resize(sdata, skb, | |
| max_t(int, extra_head + hw_headroom - | |
| skb_headroom(skb), 0), | |
| false))) { | |
| kfree_skb(skb); | |
| return true; | |
| } | |
| memcpy(ð, skb->data, ETH_HLEN - 2); | |
| hdr = skb_push(skb, extra_head); | |
| memcpy(skb->data, fast_tx->hdr, fast_tx->hdr_len); | |
| memcpy(skb->data + fast_tx->da_offs, eth.h_dest, ETH_ALEN); | |
| memcpy(skb->data + fast_tx->sa_offs, eth.h_source, ETH_ALEN); | |
| info = IEEE80211_SKB_CB(skb); | |
| memset(info, 0, sizeof(*info)); | |
| info->band = fast_tx->band; | |
| info->control.vif = &sdata->vif; | |
| info->flags = IEEE80211_TX_CTL_FIRST_FRAGMENT | | |
| IEEE80211_TX_CTL_DONTFRAG | | |
| (tid_tx ? IEEE80211_TX_CTL_AMPDU : 0); | |
| info->control.flags = IEEE80211_TX_CTRL_FAST_XMIT; | |
| if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { | |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; | |
| *ieee80211_get_qos_ctl(hdr) = tid; | |
| } | |
| __skb_queue_head_init(&tx.skbs); | |
| tx.flags = IEEE80211_TX_UNICAST; | |
| tx.local = local; | |
| tx.sdata = sdata; | |
| tx.sta = sta; | |
| tx.key = fast_tx->key; | |
| if (!ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) { | |
| tx.skb = skb; | |
| r = ieee80211_tx_h_rate_ctrl(&tx); | |
| skb = tx.skb; | |
| tx.skb = NULL; | |
| if (r != TX_CONTINUE) { | |
| if (r != TX_QUEUED) | |
| kfree_skb(skb); | |
| return true; | |
| } | |
| } | |
| if (ieee80211_queue_skb(local, sdata, sta, skb)) | |
| return true; | |
| ieee80211_xmit_fast_finish(sdata, sta, fast_tx->pn_offs, | |
| fast_tx->key, skb); | |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| sdata = container_of(sdata->bss, | |
| struct ieee80211_sub_if_data, u.ap); | |
| __skb_queue_tail(&tx.skbs, skb); | |
| ieee80211_tx_frags(local, &sdata->vif, &sta->sta, &tx.skbs, false); | |
| return true; | |
| } | |
| struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, | |
| struct ieee80211_txq *txq) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct txq_info *txqi = container_of(txq, struct txq_info, txq); | |
| struct ieee80211_hdr *hdr; | |
| struct sk_buff *skb = NULL; | |
| struct fq *fq = &local->fq; | |
| struct fq_tin *tin = &txqi->tin; | |
| struct ieee80211_tx_info *info; | |
| struct ieee80211_tx_data tx; | |
| ieee80211_tx_result r; | |
| struct ieee80211_vif *vif; | |
| spin_lock_bh(&fq->lock); | |
| if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags)) | |
| goto out; | |
| /* Make sure fragments stay together. */ | |
| skb = __skb_dequeue(&txqi->frags); | |
| if (skb) | |
| goto out; | |
| begin: | |
| skb = fq_tin_dequeue(fq, tin, fq_tin_dequeue_func); | |
| if (!skb) | |
| goto out; | |
| hdr = (struct ieee80211_hdr *)skb->data; | |
| info = IEEE80211_SKB_CB(skb); | |
| memset(&tx, 0, sizeof(tx)); | |
| __skb_queue_head_init(&tx.skbs); | |
| tx.local = local; | |
| tx.skb = skb; | |
| tx.sdata = vif_to_sdata(info->control.vif); | |
| if (txq->sta) | |
| tx.sta = container_of(txq->sta, struct sta_info, sta); | |
| /* | |
| * The key can be removed while the packet was queued, so need to call | |
| * this here to get the current key. | |
| */ | |
| r = ieee80211_tx_h_select_key(&tx); | |
| if (r != TX_CONTINUE) { | |
| ieee80211_free_txskb(&local->hw, skb); | |
| goto begin; | |
| } | |
| if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags)) | |
| info->flags |= IEEE80211_TX_CTL_AMPDU; | |
| else | |
| info->flags &= ~IEEE80211_TX_CTL_AMPDU; | |
| if (info->control.flags & IEEE80211_TX_CTRL_FAST_XMIT) { | |
| struct sta_info *sta = container_of(txq->sta, struct sta_info, | |
| sta); | |
| u8 pn_offs = 0; | |
| if (tx.key && | |
| (tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) | |
| pn_offs = ieee80211_hdrlen(hdr->frame_control); | |
| ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs, | |
| tx.key, skb); | |
| } else { | |
| if (invoke_tx_handlers_late(&tx)) | |
| goto begin; | |
| skb = __skb_dequeue(&tx.skbs); | |
| if (!skb_queue_empty(&tx.skbs)) | |
| skb_queue_splice_tail(&tx.skbs, &txqi->frags); | |
| } | |
| if (skb && skb_has_frag_list(skb) && | |
| !ieee80211_hw_check(&local->hw, TX_FRAG_LIST)) { | |
| if (skb_linearize(skb)) { | |
| ieee80211_free_txskb(&local->hw, skb); | |
| goto begin; | |
| } | |
| } | |
| switch (tx.sdata->vif.type) { | |
| case NL80211_IFTYPE_MONITOR: | |
| if (tx.sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) { | |
| vif = &tx.sdata->vif; | |
| break; | |
| } | |
| tx.sdata = rcu_dereference(local->monitor_sdata); | |
| if (tx.sdata) { | |
| vif = &tx.sdata->vif; | |
| info->hw_queue = | |
| vif->hw_queue[skb_get_queue_mapping(skb)]; | |
| } else if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) { | |
| ieee80211_free_txskb(&local->hw, skb); | |
| goto begin; | |
| } else { | |
| vif = NULL; | |
| } | |
| break; | |
| case NL80211_IFTYPE_AP_VLAN: | |
| tx.sdata = container_of(tx.sdata->bss, | |
| struct ieee80211_sub_if_data, u.ap); | |
| /* fall through */ | |
| default: | |
| vif = &tx.sdata->vif; | |
| break; | |
| } | |
| IEEE80211_SKB_CB(skb)->control.vif = vif; | |
| out: | |
| spin_unlock_bh(&fq->lock); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_tx_dequeue); | |
| void __ieee80211_subif_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev, | |
| u32 info_flags) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct sta_info *sta; | |
| struct sk_buff *next; | |
| if (unlikely(skb->len < ETH_HLEN)) { | |
| kfree_skb(skb); | |
| return; | |
| } | |
| rcu_read_lock(); | |
| if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) | |
| goto out_free; | |
| if (!IS_ERR_OR_NULL(sta)) { | |
| struct ieee80211_fast_tx *fast_tx; | |
| fast_tx = rcu_dereference(sta->fast_tx); | |
| if (fast_tx && | |
| ieee80211_xmit_fast(sdata, sta, fast_tx, skb)) | |
| goto out; | |
| } | |
| if (skb_is_gso(skb)) { | |
| struct sk_buff *segs; | |
| segs = skb_gso_segment(skb, 0); | |
| if (IS_ERR(segs)) { | |
| goto out_free; | |
| } else if (segs) { | |
| consume_skb(skb); | |
| skb = segs; | |
| } | |
| } else { | |
| /* we cannot process non-linear frames on this path */ | |
| if (skb_linearize(skb)) { | |
| kfree_skb(skb); | |
| goto out; | |
| } | |
| /* the frame could be fragmented, software-encrypted, and other | |
| * things so we cannot really handle checksum offload with it - | |
| * fix it up in software before we handle anything else. | |
| */ | |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { | |
| skb_set_transport_header(skb, | |
| skb_checksum_start_offset(skb)); | |
| if (skb_checksum_help(skb)) | |
| goto out_free; | |
| } | |
| } | |
| next = skb; | |
| while (next) { | |
| skb = next; | |
| next = skb->next; | |
| skb->prev = NULL; | |
| skb->next = NULL; | |
| skb = ieee80211_build_hdr(sdata, skb, info_flags, sta); | |
| if (IS_ERR(skb)) | |
| goto out; | |
| ieee80211_tx_stats(dev, skb->len); | |
| ieee80211_xmit(sdata, sta, skb); | |
| } | |
| goto out; | |
| out_free: | |
| kfree_skb(skb); | |
| out: | |
| rcu_read_unlock(); | |
| } | |
| static int ieee80211_change_da(struct sk_buff *skb, struct sta_info *sta) | |
| { | |
| struct ethhdr *eth; | |
| int err; | |
| err = skb_ensure_writable(skb, ETH_HLEN); | |
| if (unlikely(err)) | |
| return err; | |
| eth = (void *)skb->data; | |
| ether_addr_copy(eth->h_dest, sta->sta.addr); | |
| return 0; | |
| } | |
| static bool ieee80211_multicast_to_unicast(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| const struct ethhdr *eth = (void *)skb->data; | |
| const struct vlan_ethhdr *ethvlan = (void *)skb->data; | |
| __be16 ethertype; | |
| if (likely(!is_multicast_ether_addr(eth->h_dest))) | |
| return false; | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP_VLAN: | |
| if (sdata->u.vlan.sta) | |
| return false; | |
| if (sdata->wdev.use_4addr) | |
| return false; | |
| /* fall through */ | |
| case NL80211_IFTYPE_AP: | |
| /* check runtime toggle for this bss */ | |
| if (!sdata->bss->multicast_to_unicast) | |
| return false; | |
| break; | |
| default: | |
| return false; | |
| } | |
| /* multicast to unicast conversion only for some payload */ | |
| ethertype = eth->h_proto; | |
| if (ethertype == htons(ETH_P_8021Q) && skb->len >= VLAN_ETH_HLEN) | |
| ethertype = ethvlan->h_vlan_encapsulated_proto; | |
| switch (ethertype) { | |
| case htons(ETH_P_ARP): | |
| case htons(ETH_P_IP): | |
| case htons(ETH_P_IPV6): | |
| break; | |
| default: | |
| return false; | |
| } | |
| return true; | |
| } | |
| static void | |
| ieee80211_convert_to_unicast(struct sk_buff *skb, struct net_device *dev, | |
| struct sk_buff_head *queue) | |
| { | |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); | |
| struct ieee80211_local *local = sdata->local; | |
| const struct ethhdr *eth = (struct ethhdr *)skb->data; | |
| struct sta_info *sta, *first = NULL; | |
| struct sk_buff *cloned_skb; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sta, &local->sta_list, list) { | |
| if (sdata != sta->sdata) | |
| /* AP-VLAN mismatch */ | |
| continue; | |
| if (unlikely(ether_addr_equal(eth->h_source, sta->sta.addr))) | |
| /* do not send back to source */ | |
| continue; | |
| if (!first) { | |
| first = sta; | |
| continue; | |
| } | |
| cloned_skb = skb_clone(skb, GFP_ATOMIC); | |
| if (!cloned_skb) | |
| goto multicast; | |
| if (unlikely(ieee80211_change_da(cloned_skb, sta))) { | |
| dev_kfree_skb(cloned_skb); | |
| goto multicast; | |
| } | |
| __skb_queue_tail(queue, cloned_skb); | |
| } | |
| if (likely(first)) { | |
| if (unlikely(ieee80211_change_da(skb, first))) | |
| goto multicast; | |
| __skb_queue_tail(queue, skb); | |
| } else { | |
| /* no STA connected, drop */ | |
| kfree_skb(skb); | |
| skb = NULL; | |
| } | |
| goto out; | |
| multicast: | |
| __skb_queue_purge(queue); | |
| __skb_queue_tail(queue, skb); | |
| out: | |
| rcu_read_unlock(); | |
| } | |
| /** | |
| * ieee80211_subif_start_xmit - netif start_xmit function for 802.3 vifs | |
| * @skb: packet to be sent | |
| * @dev: incoming interface | |
| * | |
| * On failure skb will be freed. | |
| */ | |
| netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, | |
| struct net_device *dev) | |
| { | |
| if (unlikely(ieee80211_multicast_to_unicast(skb, dev))) { | |
| struct sk_buff_head queue; | |
| __skb_queue_head_init(&queue); | |
| ieee80211_convert_to_unicast(skb, dev, &queue); | |
| while ((skb = __skb_dequeue(&queue))) | |
| __ieee80211_subif_start_xmit(skb, dev, 0); | |
| } else { | |
| __ieee80211_subif_start_xmit(skb, dev, 0); | |
| } | |
| return NETDEV_TX_OK; | |
| } | |
| struct sk_buff * | |
| ieee80211_build_data_template(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb, u32 info_flags) | |
| { | |
| struct ieee80211_hdr *hdr; | |
| struct ieee80211_tx_data tx = { | |
| .local = sdata->local, | |
| .sdata = sdata, | |
| }; | |
| struct sta_info *sta; | |
| rcu_read_lock(); | |
| if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) { | |
| kfree_skb(skb); | |
| skb = ERR_PTR(-EINVAL); | |
| goto out; | |
| } | |
| skb = ieee80211_build_hdr(sdata, skb, info_flags, sta); | |
| if (IS_ERR(skb)) | |
| goto out; | |
| hdr = (void *)skb->data; | |
| tx.sta = sta_info_get(sdata, hdr->addr1); | |
| tx.skb = skb; | |
| if (ieee80211_tx_h_select_key(&tx) != TX_CONTINUE) { | |
| rcu_read_unlock(); | |
| kfree_skb(skb); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| out: | |
| rcu_read_unlock(); | |
| return skb; | |
| } | |
| /* | |
| * ieee80211_clear_tx_pending may not be called in a context where | |
| * it is possible that it packets could come in again. | |
| */ | |
| void ieee80211_clear_tx_pending(struct ieee80211_local *local) | |
| { | |
| struct sk_buff *skb; | |
| int i; | |
| for (i = 0; i < local->hw.queues; i++) { | |
| while ((skb = skb_dequeue(&local->pending[i])) != NULL) | |
| ieee80211_free_txskb(&local->hw, skb); | |
| } | |
| } | |
| /* | |
| * Returns false if the frame couldn't be transmitted but was queued instead, | |
| * which in this case means re-queued -- take as an indication to stop sending | |
| * more pending frames. | |
| */ | |
| static bool ieee80211_tx_pending_skb(struct ieee80211_local *local, | |
| struct sk_buff *skb) | |
| { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_sub_if_data *sdata; | |
| struct sta_info *sta; | |
| struct ieee80211_hdr *hdr; | |
| bool result; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| sdata = vif_to_sdata(info->control.vif); | |
| if (info->flags & IEEE80211_TX_INTFL_NEED_TXPROCESSING) { | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (unlikely(!chanctx_conf)) { | |
| dev_kfree_skb(skb); | |
| return true; | |
| } | |
| info->band = chanctx_conf->def.chan->band; | |
| result = ieee80211_tx(sdata, NULL, skb, true); | |
| } else { | |
| struct sk_buff_head skbs; | |
| __skb_queue_head_init(&skbs); | |
| __skb_queue_tail(&skbs, skb); | |
| hdr = (struct ieee80211_hdr *)skb->data; | |
| sta = sta_info_get(sdata, hdr->addr1); | |
| result = __ieee80211_tx(local, &skbs, skb->len, sta, true); | |
| } | |
| return result; | |
| } | |
| /* | |
| * Transmit all pending packets. Called from tasklet. | |
| */ | |
| void ieee80211_tx_pending(unsigned long data) | |
| { | |
| struct ieee80211_local *local = (struct ieee80211_local *)data; | |
| unsigned long flags; | |
| int i; | |
| bool txok; | |
| rcu_read_lock(); | |
| spin_lock_irqsave(&local->queue_stop_reason_lock, flags); | |
| for (i = 0; i < local->hw.queues; i++) { | |
| /* | |
| * If queue is stopped by something other than due to pending | |
| * frames, or we have no pending frames, proceed to next queue. | |
| */ | |
| if (local->queue_stop_reasons[i] || | |
| skb_queue_empty(&local->pending[i])) | |
| continue; | |
| while (!skb_queue_empty(&local->pending[i])) { | |
| struct sk_buff *skb = __skb_dequeue(&local->pending[i]); | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| if (WARN_ON(!info->control.vif)) { | |
| ieee80211_free_txskb(&local->hw, skb); | |
| continue; | |
| } | |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, | |
| flags); | |
| txok = ieee80211_tx_pending_skb(local, skb); | |
| spin_lock_irqsave(&local->queue_stop_reason_lock, | |
| flags); | |
| if (!txok) | |
| break; | |
| } | |
| if (skb_queue_empty(&local->pending[i])) | |
| ieee80211_propagate_queue_wake(local, i); | |
| } | |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); | |
| rcu_read_unlock(); | |
| } | |
| /* functions for drivers to get certain frames */ | |
| static void __ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, | |
| struct ps_data *ps, struct sk_buff *skb, | |
| bool is_template) | |
| { | |
| u8 *pos, *tim; | |
| int aid0 = 0; | |
| int i, have_bits = 0, n1, n2; | |
| /* Generate bitmap for TIM only if there are any STAs in power save | |
| * mode. */ | |
| if (atomic_read(&ps->num_sta_ps) > 0) | |
| /* in the hope that this is faster than | |
| * checking byte-for-byte */ | |
| have_bits = !bitmap_empty((unsigned long *)ps->tim, | |
| IEEE80211_MAX_AID+1); | |
| if (!is_template) { | |
| if (ps->dtim_count == 0) | |
| ps->dtim_count = sdata->vif.bss_conf.dtim_period - 1; | |
| else | |
| ps->dtim_count--; | |
| } | |
| tim = pos = skb_put(skb, 6); | |
| *pos++ = WLAN_EID_TIM; | |
| *pos++ = 4; | |
| *pos++ = ps->dtim_count; | |
| *pos++ = sdata->vif.bss_conf.dtim_period; | |
| if (ps->dtim_count == 0 && !skb_queue_empty(&ps->bc_buf)) | |
| aid0 = 1; | |
| ps->dtim_bc_mc = aid0 == 1; | |
| if (have_bits) { | |
| /* Find largest even number N1 so that bits numbered 1 through | |
| * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits | |
| * (N2 + 1) x 8 through 2007 are 0. */ | |
| n1 = 0; | |
| for (i = 0; i < IEEE80211_MAX_TIM_LEN; i++) { | |
| if (ps->tim[i]) { | |
| n1 = i & 0xfe; | |
| break; | |
| } | |
| } | |
| n2 = n1; | |
| for (i = IEEE80211_MAX_TIM_LEN - 1; i >= n1; i--) { | |
| if (ps->tim[i]) { | |
| n2 = i; | |
| break; | |
| } | |
| } | |
| /* Bitmap control */ | |
| *pos++ = n1 | aid0; | |
| /* Part Virt Bitmap */ | |
| skb_put(skb, n2 - n1); | |
| memcpy(pos, ps->tim + n1, n2 - n1 + 1); | |
| tim[1] = n2 - n1 + 4; | |
| } else { | |
| *pos++ = aid0; /* Bitmap control */ | |
| *pos++ = 0; /* Part Virt Bitmap */ | |
| } | |
| } | |
| static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, | |
| struct ps_data *ps, struct sk_buff *skb, | |
| bool is_template) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| /* | |
| * Not very nice, but we want to allow the driver to call | |
| * ieee80211_beacon_get() as a response to the set_tim() | |
| * callback. That, however, is already invoked under the | |
| * sta_lock to guarantee consistent and race-free update | |
| * of the tim bitmap in mac80211 and the driver. | |
| */ | |
| if (local->tim_in_locked_section) { | |
| __ieee80211_beacon_add_tim(sdata, ps, skb, is_template); | |
| } else { | |
| spin_lock_bh(&local->tim_lock); | |
| __ieee80211_beacon_add_tim(sdata, ps, skb, is_template); | |
| spin_unlock_bh(&local->tim_lock); | |
| } | |
| return 0; | |
| } | |
| static void ieee80211_set_csa(struct ieee80211_sub_if_data *sdata, | |
| struct beacon_data *beacon) | |
| { | |
| struct probe_resp *resp; | |
| u8 *beacon_data; | |
| size_t beacon_data_len; | |
| int i; | |
| u8 count = beacon->csa_current_counter; | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_AP: | |
| beacon_data = beacon->tail; | |
| beacon_data_len = beacon->tail_len; | |
| break; | |
| case NL80211_IFTYPE_ADHOC: | |
| beacon_data = beacon->head; | |
| beacon_data_len = beacon->head_len; | |
| break; | |
| case NL80211_IFTYPE_MESH_POINT: | |
| beacon_data = beacon->head; | |
| beacon_data_len = beacon->head_len; | |
| break; | |
| default: | |
| return; | |
| } | |
| rcu_read_lock(); | |
| for (i = 0; i < IEEE80211_MAX_CSA_COUNTERS_NUM; ++i) { | |
| resp = rcu_dereference(sdata->u.ap.probe_resp); | |
| if (beacon->csa_counter_offsets[i]) { | |
| if (WARN_ON_ONCE(beacon->csa_counter_offsets[i] >= | |
| beacon_data_len)) { | |
| rcu_read_unlock(); | |
| return; | |
| } | |
| beacon_data[beacon->csa_counter_offsets[i]] = count; | |
| } | |
| if (sdata->vif.type == NL80211_IFTYPE_AP && resp) | |
| resp->data[resp->csa_counter_offsets[i]] = count; | |
| } | |
| rcu_read_unlock(); | |
| } | |
| static u8 __ieee80211_csa_update_counter(struct beacon_data *beacon) | |
| { | |
| beacon->csa_current_counter--; | |
| /* the counter should never reach 0 */ | |
| WARN_ON_ONCE(!beacon->csa_current_counter); | |
| return beacon->csa_current_counter; | |
| } | |
| u8 ieee80211_csa_update_counter(struct ieee80211_vif *vif) | |
| { | |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | |
| struct beacon_data *beacon = NULL; | |
| u8 count = 0; | |
| rcu_read_lock(); | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) | |
| beacon = rcu_dereference(sdata->u.ap.beacon); | |
| else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) | |
| beacon = rcu_dereference(sdata->u.ibss.presp); | |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) | |
| beacon = rcu_dereference(sdata->u.mesh.beacon); | |
| if (!beacon) | |
| goto unlock; | |
| count = __ieee80211_csa_update_counter(beacon); | |
| unlock: | |
| rcu_read_unlock(); | |
| return count; | |
| } | |
| EXPORT_SYMBOL(ieee80211_csa_update_counter); | |
| bool ieee80211_csa_is_complete(struct ieee80211_vif *vif) | |
| { | |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | |
| struct beacon_data *beacon = NULL; | |
| u8 *beacon_data; | |
| size_t beacon_data_len; | |
| int ret = false; | |
| if (!ieee80211_sdata_running(sdata)) | |
| return false; | |
| rcu_read_lock(); | |
| if (vif->type == NL80211_IFTYPE_AP) { | |
| struct ieee80211_if_ap *ap = &sdata->u.ap; | |
| beacon = rcu_dereference(ap->beacon); | |
| if (WARN_ON(!beacon || !beacon->tail)) | |
| goto out; | |
| beacon_data = beacon->tail; | |
| beacon_data_len = beacon->tail_len; | |
| } else if (vif->type == NL80211_IFTYPE_ADHOC) { | |
| struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; | |
| beacon = rcu_dereference(ifibss->presp); | |
| if (!beacon) | |
| goto out; | |
| beacon_data = beacon->head; | |
| beacon_data_len = beacon->head_len; | |
| } else if (vif->type == NL80211_IFTYPE_MESH_POINT) { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| beacon = rcu_dereference(ifmsh->beacon); | |
| if (!beacon) | |
| goto out; | |
| beacon_data = beacon->head; | |
| beacon_data_len = beacon->head_len; | |
| } else { | |
| WARN_ON(1); | |
| goto out; | |
| } | |
| if (!beacon->csa_counter_offsets[0]) | |
| goto out; | |
| if (WARN_ON_ONCE(beacon->csa_counter_offsets[0] > beacon_data_len)) | |
| goto out; | |
| if (beacon_data[beacon->csa_counter_offsets[0]] == 1) | |
| ret = true; | |
| out: | |
| rcu_read_unlock(); | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ieee80211_csa_is_complete); | |
| static struct sk_buff * | |
| __ieee80211_beacon_get(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_mutable_offsets *offs, | |
| bool is_template) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct beacon_data *beacon = NULL; | |
| struct sk_buff *skb = NULL; | |
| struct ieee80211_tx_info *info; | |
| struct ieee80211_sub_if_data *sdata = NULL; | |
| enum nl80211_band band; | |
| struct ieee80211_tx_rate_control txrc; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| int csa_off_base = 0; | |
| rcu_read_lock(); | |
| sdata = vif_to_sdata(vif); | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!ieee80211_sdata_running(sdata) || !chanctx_conf) | |
| goto out; | |
| if (offs) | |
| memset(offs, 0, sizeof(*offs)); | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { | |
| struct ieee80211_if_ap *ap = &sdata->u.ap; | |
| beacon = rcu_dereference(ap->beacon); | |
| if (beacon) { | |
| if (beacon->csa_counter_offsets[0]) { | |
| if (!is_template) | |
| __ieee80211_csa_update_counter(beacon); | |
| ieee80211_set_csa(sdata, beacon); | |
| } | |
| /* | |
| * headroom, head length, | |
| * tail length and maximum TIM length | |
| */ | |
| skb = dev_alloc_skb(local->tx_headroom + | |
| beacon->head_len + | |
| beacon->tail_len + 256 + | |
| local->hw.extra_beacon_tailroom); | |
| if (!skb) | |
| goto out; | |
| skb_reserve(skb, local->tx_headroom); | |
| skb_put_data(skb, beacon->head, beacon->head_len); | |
| ieee80211_beacon_add_tim(sdata, &ap->ps, skb, | |
| is_template); | |
| if (offs) { | |
| offs->tim_offset = beacon->head_len; | |
| offs->tim_length = skb->len - beacon->head_len; | |
| /* for AP the csa offsets are from tail */ | |
| csa_off_base = skb->len; | |
| } | |
| if (beacon->tail) | |
| skb_put_data(skb, beacon->tail, | |
| beacon->tail_len); | |
| } else | |
| goto out; | |
| } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | |
| struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; | |
| struct ieee80211_hdr *hdr; | |
| beacon = rcu_dereference(ifibss->presp); | |
| if (!beacon) | |
| goto out; | |
| if (beacon->csa_counter_offsets[0]) { | |
| if (!is_template) | |
| __ieee80211_csa_update_counter(beacon); | |
| ieee80211_set_csa(sdata, beacon); | |
| } | |
| skb = dev_alloc_skb(local->tx_headroom + beacon->head_len + | |
| local->hw.extra_beacon_tailroom); | |
| if (!skb) | |
| goto out; | |
| skb_reserve(skb, local->tx_headroom); | |
| skb_put_data(skb, beacon->head, beacon->head_len); | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_BEACON); | |
| } else if (ieee80211_vif_is_mesh(&sdata->vif)) { | |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; | |
| beacon = rcu_dereference(ifmsh->beacon); | |
| if (!beacon) | |
| goto out; | |
| if (beacon->csa_counter_offsets[0]) { | |
| if (!is_template) | |
| /* TODO: For mesh csa_counter is in TU, so | |
| * decrementing it by one isn't correct, but | |
| * for now we leave it consistent with overall | |
| * mac80211's behavior. | |
| */ | |
| __ieee80211_csa_update_counter(beacon); | |
| ieee80211_set_csa(sdata, beacon); | |
| } | |
| if (ifmsh->sync_ops) | |
| ifmsh->sync_ops->adjust_tsf(sdata, beacon); | |
| skb = dev_alloc_skb(local->tx_headroom + | |
| beacon->head_len + | |
| 256 + /* TIM IE */ | |
| beacon->tail_len + | |
| local->hw.extra_beacon_tailroom); | |
| if (!skb) | |
| goto out; | |
| skb_reserve(skb, local->tx_headroom); | |
| skb_put_data(skb, beacon->head, beacon->head_len); | |
| ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb, is_template); | |
| if (offs) { | |
| offs->tim_offset = beacon->head_len; | |
| offs->tim_length = skb->len - beacon->head_len; | |
| } | |
| skb_put_data(skb, beacon->tail, beacon->tail_len); | |
| } else { | |
| WARN_ON(1); | |
| goto out; | |
| } | |
| /* CSA offsets */ | |
| if (offs && beacon) { | |
| int i; | |
| for (i = 0; i < IEEE80211_MAX_CSA_COUNTERS_NUM; i++) { | |
| u16 csa_off = beacon->csa_counter_offsets[i]; | |
| if (!csa_off) | |
| continue; | |
| offs->csa_counter_offs[i] = csa_off_base + csa_off; | |
| } | |
| } | |
| band = chanctx_conf->def.chan->band; | |
| info = IEEE80211_SKB_CB(skb); | |
| info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; | |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; | |
| info->band = band; | |
| memset(&txrc, 0, sizeof(txrc)); | |
| txrc.hw = hw; | |
| txrc.sband = local->hw.wiphy->bands[band]; | |
| txrc.bss_conf = &sdata->vif.bss_conf; | |
| txrc.skb = skb; | |
| txrc.reported_rate.idx = -1; | |
| txrc.rate_idx_mask = sdata->rc_rateidx_mask[band]; | |
| txrc.bss = true; | |
| rate_control_get_rate(sdata, NULL, &txrc); | |
| info->control.vif = vif; | |
| info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT | | |
| IEEE80211_TX_CTL_ASSIGN_SEQ | | |
| IEEE80211_TX_CTL_FIRST_FRAGMENT; | |
| out: | |
| rcu_read_unlock(); | |
| return skb; | |
| } | |
| struct sk_buff * | |
| ieee80211_beacon_get_template(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| struct ieee80211_mutable_offsets *offs) | |
| { | |
| return __ieee80211_beacon_get(hw, vif, offs, true); | |
| } | |
| EXPORT_SYMBOL(ieee80211_beacon_get_template); | |
| struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| u16 *tim_offset, u16 *tim_length) | |
| { | |
| struct ieee80211_mutable_offsets offs = {}; | |
| struct sk_buff *bcn = __ieee80211_beacon_get(hw, vif, &offs, false); | |
| struct sk_buff *copy; | |
| struct ieee80211_supported_band *sband; | |
| int shift; | |
| if (!bcn) | |
| return bcn; | |
| if (tim_offset) | |
| *tim_offset = offs.tim_offset; | |
| if (tim_length) | |
| *tim_length = offs.tim_length; | |
| if (ieee80211_hw_check(hw, BEACON_TX_STATUS) || | |
| !hw_to_local(hw)->monitors) | |
| return bcn; | |
| /* send a copy to monitor interfaces */ | |
| copy = skb_copy(bcn, GFP_ATOMIC); | |
| if (!copy) | |
| return bcn; | |
| shift = ieee80211_vif_get_shift(vif); | |
| sband = ieee80211_get_sband(vif_to_sdata(vif)); | |
| if (!sband) | |
| return bcn; | |
| ieee80211_tx_monitor(hw_to_local(hw), copy, sband, 1, shift, false); | |
| return bcn; | |
| } | |
| EXPORT_SYMBOL(ieee80211_beacon_get_tim); | |
| struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ieee80211_if_ap *ap = NULL; | |
| struct sk_buff *skb = NULL; | |
| struct probe_resp *presp = NULL; | |
| struct ieee80211_hdr *hdr; | |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); | |
| if (sdata->vif.type != NL80211_IFTYPE_AP) | |
| return NULL; | |
| rcu_read_lock(); | |
| ap = &sdata->u.ap; | |
| presp = rcu_dereference(ap->probe_resp); | |
| if (!presp) | |
| goto out; | |
| skb = dev_alloc_skb(presp->len); | |
| if (!skb) | |
| goto out; | |
| skb_put_data(skb, presp->data, presp->len); | |
| hdr = (struct ieee80211_hdr *) skb->data; | |
| memset(hdr->addr1, 0, sizeof(hdr->addr1)); | |
| out: | |
| rcu_read_unlock(); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_proberesp_get); | |
| struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_if_managed *ifmgd; | |
| struct ieee80211_pspoll *pspoll; | |
| struct ieee80211_local *local; | |
| struct sk_buff *skb; | |
| if (WARN_ON(vif->type != NL80211_IFTYPE_STATION)) | |
| return NULL; | |
| sdata = vif_to_sdata(vif); | |
| ifmgd = &sdata->u.mgd; | |
| local = sdata->local; | |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*pspoll)); | |
| if (!skb) | |
| return NULL; | |
| skb_reserve(skb, local->hw.extra_tx_headroom); | |
| pspoll = skb_put_zero(skb, sizeof(*pspoll)); | |
| pspoll->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL | | |
| IEEE80211_STYPE_PSPOLL); | |
| pspoll->aid = cpu_to_le16(ifmgd->aid); | |
| /* aid in PS-Poll has its two MSBs each set to 1 */ | |
| pspoll->aid |= cpu_to_le16(1 << 15 | 1 << 14); | |
| memcpy(pspoll->bssid, ifmgd->bssid, ETH_ALEN); | |
| memcpy(pspoll->ta, vif->addr, ETH_ALEN); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_pspoll_get); | |
| struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif, | |
| bool qos_ok) | |
| { | |
| struct ieee80211_hdr_3addr *nullfunc; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_if_managed *ifmgd; | |
| struct ieee80211_local *local; | |
| struct sk_buff *skb; | |
| bool qos = false; | |
| if (WARN_ON(vif->type != NL80211_IFTYPE_STATION)) | |
| return NULL; | |
| sdata = vif_to_sdata(vif); | |
| ifmgd = &sdata->u.mgd; | |
| local = sdata->local; | |
| if (qos_ok) { | |
| struct sta_info *sta; | |
| rcu_read_lock(); | |
| sta = sta_info_get(sdata, ifmgd->bssid); | |
| qos = sta && sta->sta.wme; | |
| rcu_read_unlock(); | |
| } | |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + | |
| sizeof(*nullfunc) + 2); | |
| if (!skb) | |
| return NULL; | |
| skb_reserve(skb, local->hw.extra_tx_headroom); | |
| nullfunc = skb_put_zero(skb, sizeof(*nullfunc)); | |
| nullfunc->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | | |
| IEEE80211_STYPE_NULLFUNC | | |
| IEEE80211_FCTL_TODS); | |
| if (qos) { | |
| __le16 qos = cpu_to_le16(7); | |
| BUILD_BUG_ON((IEEE80211_STYPE_QOS_NULLFUNC | | |
| IEEE80211_STYPE_NULLFUNC) != | |
| IEEE80211_STYPE_QOS_NULLFUNC); | |
| nullfunc->frame_control |= | |
| cpu_to_le16(IEEE80211_STYPE_QOS_NULLFUNC); | |
| skb->priority = 7; | |
| skb_set_queue_mapping(skb, IEEE80211_AC_VO); | |
| skb_put_data(skb, &qos, sizeof(qos)); | |
| } | |
| memcpy(nullfunc->addr1, ifmgd->bssid, ETH_ALEN); | |
| memcpy(nullfunc->addr2, vif->addr, ETH_ALEN); | |
| memcpy(nullfunc->addr3, ifmgd->bssid, ETH_ALEN); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_nullfunc_get); | |
| struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, | |
| const u8 *src_addr, | |
| const u8 *ssid, size_t ssid_len, | |
| size_t tailroom) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct ieee80211_hdr_3addr *hdr; | |
| struct sk_buff *skb; | |
| size_t ie_ssid_len; | |
| u8 *pos; | |
| ie_ssid_len = 2 + ssid_len; | |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*hdr) + | |
| ie_ssid_len + tailroom); | |
| if (!skb) | |
| return NULL; | |
| skb_reserve(skb, local->hw.extra_tx_headroom); | |
| hdr = skb_put_zero(skb, sizeof(*hdr)); | |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | | |
| IEEE80211_STYPE_PROBE_REQ); | |
| eth_broadcast_addr(hdr->addr1); | |
| memcpy(hdr->addr2, src_addr, ETH_ALEN); | |
| eth_broadcast_addr(hdr->addr3); | |
| pos = skb_put(skb, ie_ssid_len); | |
| *pos++ = WLAN_EID_SSID; | |
| *pos++ = ssid_len; | |
| if (ssid_len) | |
| memcpy(pos, ssid, ssid_len); | |
| pos += ssid_len; | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_probereq_get); | |
| void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| const void *frame, size_t frame_len, | |
| const struct ieee80211_tx_info *frame_txctl, | |
| struct ieee80211_rts *rts) | |
| { | |
| const struct ieee80211_hdr *hdr = frame; | |
| rts->frame_control = | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); | |
| rts->duration = ieee80211_rts_duration(hw, vif, frame_len, | |
| frame_txctl); | |
| memcpy(rts->ra, hdr->addr1, sizeof(rts->ra)); | |
| memcpy(rts->ta, hdr->addr2, sizeof(rts->ta)); | |
| } | |
| EXPORT_SYMBOL(ieee80211_rts_get); | |
| void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, | |
| const void *frame, size_t frame_len, | |
| const struct ieee80211_tx_info *frame_txctl, | |
| struct ieee80211_cts *cts) | |
| { | |
| const struct ieee80211_hdr *hdr = frame; | |
| cts->frame_control = | |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); | |
| cts->duration = ieee80211_ctstoself_duration(hw, vif, | |
| frame_len, frame_txctl); | |
| memcpy(cts->ra, hdr->addr1, sizeof(cts->ra)); | |
| } | |
| EXPORT_SYMBOL(ieee80211_ctstoself_get); | |
| struct sk_buff * | |
| ieee80211_get_buffered_bc(struct ieee80211_hw *hw, | |
| struct ieee80211_vif *vif) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| struct sk_buff *skb = NULL; | |
| struct ieee80211_tx_data tx; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ps_data *ps; | |
| struct ieee80211_tx_info *info; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| sdata = vif_to_sdata(vif); | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (!chanctx_conf) | |
| goto out; | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { | |
| struct beacon_data *beacon = | |
| rcu_dereference(sdata->u.ap.beacon); | |
| if (!beacon || !beacon->head) | |
| goto out; | |
| ps = &sdata->u.ap.ps; | |
| } else if (ieee80211_vif_is_mesh(&sdata->vif)) { | |
| ps = &sdata->u.mesh.ps; | |
| } else { | |
| goto out; | |
| } | |
| if (ps->dtim_count != 0 || !ps->dtim_bc_mc) | |
| goto out; /* send buffered bc/mc only after DTIM beacon */ | |
| while (1) { | |
| skb = skb_dequeue(&ps->bc_buf); | |
| if (!skb) | |
| goto out; | |
| local->total_ps_buffered--; | |
| if (!skb_queue_empty(&ps->bc_buf) && skb->len >= 2) { | |
| struct ieee80211_hdr *hdr = | |
| (struct ieee80211_hdr *) skb->data; | |
| /* more buffered multicast/broadcast frames ==> set | |
| * MoreData flag in IEEE 802.11 header to inform PS | |
| * STAs */ | |
| hdr->frame_control |= | |
| cpu_to_le16(IEEE80211_FCTL_MOREDATA); | |
| } | |
| if (sdata->vif.type == NL80211_IFTYPE_AP) | |
| sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); | |
| if (!ieee80211_tx_prepare(sdata, &tx, NULL, skb)) | |
| break; | |
| ieee80211_free_txskb(hw, skb); | |
| } | |
| info = IEEE80211_SKB_CB(skb); | |
| tx.flags |= IEEE80211_TX_PS_BUFFERED; | |
| info->band = chanctx_conf->def.chan->band; | |
| if (invoke_tx_handlers(&tx)) | |
| skb = NULL; | |
| out: | |
| rcu_read_unlock(); | |
| return skb; | |
| } | |
| EXPORT_SYMBOL(ieee80211_get_buffered_bc); | |
| int ieee80211_reserve_tid(struct ieee80211_sta *pubsta, u8 tid) | |
| { | |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| int ret; | |
| u32 queues; | |
| lockdep_assert_held(&local->sta_mtx); | |
| /* only some cases are supported right now */ | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_AP_VLAN: | |
| break; | |
| default: | |
| WARN_ON(1); | |
| return -EINVAL; | |
| } | |
| if (WARN_ON(tid >= IEEE80211_NUM_UPS)) | |
| return -EINVAL; | |
| if (sta->reserved_tid == tid) { | |
| ret = 0; | |
| goto out; | |
| } | |
| if (sta->reserved_tid != IEEE80211_TID_UNRESERVED) { | |
| sdata_err(sdata, "TID reservation already active\n"); | |
| ret = -EALREADY; | |
| goto out; | |
| } | |
| ieee80211_stop_vif_queues(sdata->local, sdata, | |
| IEEE80211_QUEUE_STOP_REASON_RESERVE_TID); | |
| synchronize_net(); | |
| /* Tear down BA sessions so we stop aggregating on this TID */ | |
| if (ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION)) { | |
| set_sta_flag(sta, WLAN_STA_BLOCK_BA); | |
| __ieee80211_stop_tx_ba_session(sta, tid, | |
| AGG_STOP_LOCAL_REQUEST); | |
| } | |
| queues = BIT(sdata->vif.hw_queue[ieee802_1d_to_ac[tid]]); | |
| __ieee80211_flush_queues(local, sdata, queues, false); | |
| sta->reserved_tid = tid; | |
| ieee80211_wake_vif_queues(local, sdata, | |
| IEEE80211_QUEUE_STOP_REASON_RESERVE_TID); | |
| if (ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION)) | |
| clear_sta_flag(sta, WLAN_STA_BLOCK_BA); | |
| ret = 0; | |
| out: | |
| return ret; | |
| } | |
| EXPORT_SYMBOL(ieee80211_reserve_tid); | |
| void ieee80211_unreserve_tid(struct ieee80211_sta *pubsta, u8 tid) | |
| { | |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| lockdep_assert_held(&sdata->local->sta_mtx); | |
| /* only some cases are supported right now */ | |
| switch (sdata->vif.type) { | |
| case NL80211_IFTYPE_STATION: | |
| case NL80211_IFTYPE_AP: | |
| case NL80211_IFTYPE_AP_VLAN: | |
| break; | |
| default: | |
| WARN_ON(1); | |
| return; | |
| } | |
| if (tid != sta->reserved_tid) { | |
| sdata_err(sdata, "TID to unreserve (%d) isn't reserved\n", tid); | |
| return; | |
| } | |
| sta->reserved_tid = IEEE80211_TID_UNRESERVED; | |
| } | |
| EXPORT_SYMBOL(ieee80211_unreserve_tid); | |
| void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata, | |
| struct sk_buff *skb, int tid, | |
| enum nl80211_band band) | |
| { | |
| int ac = ieee80211_ac_from_tid(tid); | |
| skb_reset_mac_header(skb); | |
| skb_set_queue_mapping(skb, ac); | |
| skb->priority = tid; | |
| skb->dev = sdata->dev; | |
| /* | |
| * The other path calling ieee80211_xmit is from the tasklet, | |
| * and while we can handle concurrent transmissions locking | |
| * requirements are that we do not come into tx with bhs on. | |
| */ | |
| local_bh_disable(); | |
| IEEE80211_SKB_CB(skb)->band = band; | |
| ieee80211_xmit(sdata, NULL, skb); | |
| local_bh_enable(); | |
| } |