| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2005-2006, Devicescape Software, Inc. | |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> | |
| * Copyright 2013-2014 Intel Mobile Communications GmbH | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <net/mac80211.h> | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/types.h> | |
| #include <linux/slab.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/rtnetlink.h> | |
| #include <linux/bitmap.h> | |
| #include <linux/inetdevice.h> | |
| #include <net/net_namespace.h> | |
| #include <net/cfg80211.h> | |
| #include <net/addrconf.h> | |
| #include "ieee80211_i.h" | |
| #include "driver-ops.h" | |
| #include "rate.h" | |
| #include "mesh.h" | |
| #include "wep.h" | |
| #include "led.h" | |
| #include "debugfs.h" | |
| void ieee80211_configure_filter(struct ieee80211_local *local) | |
| { | |
| u64 mc; | |
| unsigned int changed_flags; | |
| unsigned int new_flags = 0; | |
| if (atomic_read(&local->iff_allmultis)) | |
| new_flags |= FIF_ALLMULTI; | |
| if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) || | |
| test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning)) | |
| new_flags |= FIF_BCN_PRBRESP_PROMISC; | |
| if (local->fif_probe_req || local->probe_req_reg) | |
| new_flags |= FIF_PROBE_REQ; | |
| if (local->fif_fcsfail) | |
| new_flags |= FIF_FCSFAIL; | |
| if (local->fif_plcpfail) | |
| new_flags |= FIF_PLCPFAIL; | |
| if (local->fif_control) | |
| new_flags |= FIF_CONTROL; | |
| if (local->fif_other_bss) | |
| new_flags |= FIF_OTHER_BSS; | |
| if (local->fif_pspoll) | |
| new_flags |= FIF_PSPOLL; | |
| spin_lock_bh(&local->filter_lock); | |
| changed_flags = local->filter_flags ^ new_flags; | |
| mc = drv_prepare_multicast(local, &local->mc_list); | |
| spin_unlock_bh(&local->filter_lock); | |
| /* be a bit nasty */ | |
| new_flags |= (1<<31); | |
| drv_configure_filter(local, changed_flags, &new_flags, mc); | |
| WARN_ON(new_flags & (1<<31)); | |
| local->filter_flags = new_flags & ~(1<<31); | |
| } | |
| static void ieee80211_reconfig_filter(struct work_struct *work) | |
| { | |
| struct ieee80211_local *local = | |
| container_of(work, struct ieee80211_local, reconfig_filter); | |
| ieee80211_configure_filter(local); | |
| } | |
| static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local) | |
| { | |
| struct ieee80211_sub_if_data *sdata; | |
| struct cfg80211_chan_def chandef = {}; | |
| u32 changed = 0; | |
| int power; | |
| u32 offchannel_flag; | |
| offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; | |
| if (local->scan_chandef.chan) { | |
| chandef = local->scan_chandef; | |
| } else if (local->tmp_channel) { | |
| chandef.chan = local->tmp_channel; | |
| chandef.width = NL80211_CHAN_WIDTH_20_NOHT; | |
| chandef.center_freq1 = chandef.chan->center_freq; | |
| } else | |
| chandef = local->_oper_chandef; | |
| WARN(!cfg80211_chandef_valid(&chandef), | |
| "control:%d MHz width:%d center: %d/%d MHz", | |
| chandef.chan->center_freq, chandef.width, | |
| chandef.center_freq1, chandef.center_freq2); | |
| if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef)) | |
| local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL; | |
| else | |
| local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL; | |
| offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL; | |
| if (offchannel_flag || | |
| !cfg80211_chandef_identical(&local->hw.conf.chandef, | |
| &local->_oper_chandef)) { | |
| local->hw.conf.chandef = chandef; | |
| changed |= IEEE80211_CONF_CHANGE_CHANNEL; | |
| } | |
| if (!conf_is_ht(&local->hw.conf)) { | |
| /* | |
| * mac80211.h documents that this is only valid | |
| * when the channel is set to an HT type, and | |
| * that otherwise STATIC is used. | |
| */ | |
| local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC; | |
| } else if (local->hw.conf.smps_mode != local->smps_mode) { | |
| local->hw.conf.smps_mode = local->smps_mode; | |
| changed |= IEEE80211_CONF_CHANGE_SMPS; | |
| } | |
| power = ieee80211_chandef_max_power(&chandef); | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { | |
| if (!rcu_access_pointer(sdata->vif.chanctx_conf)) | |
| continue; | |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| continue; | |
| power = min(power, sdata->vif.bss_conf.txpower); | |
| } | |
| rcu_read_unlock(); | |
| if (local->hw.conf.power_level != power) { | |
| changed |= IEEE80211_CONF_CHANGE_POWER; | |
| local->hw.conf.power_level = power; | |
| } | |
| return changed; | |
| } | |
| int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) | |
| { | |
| int ret = 0; | |
| might_sleep(); | |
| if (!local->use_chanctx) | |
| changed |= ieee80211_hw_conf_chan(local); | |
| else | |
| changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL | | |
| IEEE80211_CONF_CHANGE_POWER); | |
| if (changed && local->open_count) { | |
| ret = drv_config(local, changed); | |
| /* | |
| * Goal: | |
| * HW reconfiguration should never fail, the driver has told | |
| * us what it can support so it should live up to that promise. | |
| * | |
| * Current status: | |
| * rfkill is not integrated with mac80211 and a | |
| * configuration command can thus fail if hardware rfkill | |
| * is enabled | |
| * | |
| * FIXME: integrate rfkill with mac80211 and then add this | |
| * WARN_ON() back | |
| * | |
| */ | |
| /* WARN_ON(ret); */ | |
| } | |
| return ret; | |
| } | |
| void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, | |
| u32 changed) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| return; | |
| drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed); | |
| } | |
| u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata) | |
| { | |
| sdata->vif.bss_conf.use_cts_prot = false; | |
| sdata->vif.bss_conf.use_short_preamble = false; | |
| sdata->vif.bss_conf.use_short_slot = false; | |
| return BSS_CHANGED_ERP_CTS_PROT | | |
| BSS_CHANGED_ERP_PREAMBLE | | |
| BSS_CHANGED_ERP_SLOT; | |
| } | |
| static void ieee80211_tasklet_handler(unsigned long data) | |
| { | |
| struct ieee80211_local *local = (struct ieee80211_local *) data; | |
| struct sk_buff *skb; | |
| while ((skb = skb_dequeue(&local->skb_queue)) || | |
| (skb = skb_dequeue(&local->skb_queue_unreliable))) { | |
| switch (skb->pkt_type) { | |
| case IEEE80211_RX_MSG: | |
| /* Clear skb->pkt_type in order to not confuse kernel | |
| * netstack. */ | |
| skb->pkt_type = 0; | |
| ieee80211_rx(&local->hw, skb); | |
| break; | |
| case IEEE80211_TX_STATUS_MSG: | |
| skb->pkt_type = 0; | |
| ieee80211_tx_status(&local->hw, skb); | |
| break; | |
| default: | |
| WARN(1, "mac80211: Packet is of unknown type %d\n", | |
| skb->pkt_type); | |
| dev_kfree_skb(skb); | |
| break; | |
| } | |
| } | |
| } | |
| static void ieee80211_restart_work(struct work_struct *work) | |
| { | |
| struct ieee80211_local *local = | |
| container_of(work, struct ieee80211_local, restart_work); | |
| struct ieee80211_sub_if_data *sdata; | |
| /* wait for scan work complete */ | |
| flush_workqueue(local->workqueue); | |
| flush_work(&local->sched_scan_stopped_work); | |
| WARN(test_bit(SCAN_HW_SCANNING, &local->scanning), | |
| "%s called with hardware scan in progress\n", __func__); | |
| flush_work(&local->radar_detected_work); | |
| rtnl_lock(); | |
| list_for_each_entry(sdata, &local->interfaces, list) { | |
| /* | |
| * XXX: there may be more work for other vif types and even | |
| * for station mode: a good thing would be to run most of | |
| * the iface type's dependent _stop (ieee80211_mg_stop, | |
| * ieee80211_ibss_stop) etc... | |
| * For now, fix only the specific bug that was seen: race | |
| * between csa_connection_drop_work and us. | |
| */ | |
| if (sdata->vif.type == NL80211_IFTYPE_STATION) { | |
| /* | |
| * This worker is scheduled from the iface worker that | |
| * runs on mac80211's workqueue, so we can't be | |
| * scheduling this worker after the cancel right here. | |
| * The exception is ieee80211_chswitch_done. | |
| * Then we can have a race... | |
| */ | |
| cancel_work_sync(&sdata->u.mgd.csa_connection_drop_work); | |
| } | |
| flush_delayed_work(&sdata->dec_tailroom_needed_wk); | |
| } | |
| ieee80211_scan_cancel(local); | |
| /* make sure any new ROC will consider local->in_reconfig */ | |
| flush_delayed_work(&local->roc_work); | |
| flush_work(&local->hw_roc_done); | |
| ieee80211_reconfig(local); | |
| rtnl_unlock(); | |
| } | |
| void ieee80211_restart_hw(struct ieee80211_hw *hw) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| trace_api_restart_hw(local); | |
| wiphy_info(hw->wiphy, | |
| "Hardware restart was requested\n"); | |
| /* use this reason, ieee80211_reconfig will unblock it */ | |
| ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP, | |
| IEEE80211_QUEUE_STOP_REASON_SUSPEND, | |
| false); | |
| /* | |
| * Stop all Rx during the reconfig. We don't want state changes | |
| * or driver callbacks while this is in progress. | |
| */ | |
| local->in_reconfig = true; | |
| barrier(); | |
| queue_work(system_freezable_wq, &local->restart_work); | |
| } | |
| EXPORT_SYMBOL(ieee80211_restart_hw); | |
| #ifdef CONFIG_INET | |
| static int ieee80211_ifa_changed(struct notifier_block *nb, | |
| unsigned long data, void *arg) | |
| { | |
| struct in_ifaddr *ifa = arg; | |
| struct ieee80211_local *local = | |
| container_of(nb, struct ieee80211_local, | |
| ifa_notifier); | |
| struct net_device *ndev = ifa->ifa_dev->dev; | |
| struct wireless_dev *wdev = ndev->ieee80211_ptr; | |
| struct in_device *idev; | |
| struct ieee80211_sub_if_data *sdata; | |
| struct ieee80211_bss_conf *bss_conf; | |
| struct ieee80211_if_managed *ifmgd; | |
| int c = 0; | |
| /* Make sure it's our interface that got changed */ | |
| if (!wdev) | |
| return NOTIFY_DONE; | |
| if (wdev->wiphy != local->hw.wiphy) | |
| return NOTIFY_DONE; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(ndev); | |
| bss_conf = &sdata->vif.bss_conf; | |
| /* ARP filtering is only supported in managed mode */ | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return NOTIFY_DONE; | |
| idev = __in_dev_get_rtnl(sdata->dev); | |
| if (!idev) | |
| return NOTIFY_DONE; | |
| ifmgd = &sdata->u.mgd; | |
| sdata_lock(sdata); | |
| /* Copy the addresses to the bss_conf list */ | |
| ifa = idev->ifa_list; | |
| while (ifa) { | |
| if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN) | |
| bss_conf->arp_addr_list[c] = ifa->ifa_address; | |
| ifa = ifa->ifa_next; | |
| c++; | |
| } | |
| bss_conf->arp_addr_cnt = c; | |
| /* Configure driver only if associated (which also implies it is up) */ | |
| if (ifmgd->associated) | |
| ieee80211_bss_info_change_notify(sdata, | |
| BSS_CHANGED_ARP_FILTER); | |
| sdata_unlock(sdata); | |
| return NOTIFY_OK; | |
| } | |
| #endif | |
| #if IS_ENABLED(CONFIG_IPV6) | |
| static int ieee80211_ifa6_changed(struct notifier_block *nb, | |
| unsigned long data, void *arg) | |
| { | |
| struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg; | |
| struct inet6_dev *idev = ifa->idev; | |
| struct net_device *ndev = ifa->idev->dev; | |
| struct ieee80211_local *local = | |
| container_of(nb, struct ieee80211_local, ifa6_notifier); | |
| struct wireless_dev *wdev = ndev->ieee80211_ptr; | |
| struct ieee80211_sub_if_data *sdata; | |
| /* Make sure it's our interface that got changed */ | |
| if (!wdev || wdev->wiphy != local->hw.wiphy) | |
| return NOTIFY_DONE; | |
| sdata = IEEE80211_DEV_TO_SUB_IF(ndev); | |
| /* | |
| * For now only support station mode. This is mostly because | |
| * doing AP would have to handle AP_VLAN in some way ... | |
| */ | |
| if (sdata->vif.type != NL80211_IFTYPE_STATION) | |
| return NOTIFY_DONE; | |
| drv_ipv6_addr_change(local, sdata, idev); | |
| return NOTIFY_OK; | |
| } | |
| #endif | |
| /* There isn't a lot of sense in it, but you can transmit anything you like */ | |
| static const struct ieee80211_txrx_stypes | |
| ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = { | |
| [NL80211_IFTYPE_ADHOC] = { | |
| .tx = 0xffff, | |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_AUTH >> 4) | | |
| BIT(IEEE80211_STYPE_DEAUTH >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), | |
| }, | |
| [NL80211_IFTYPE_STATION] = { | |
| .tx = 0xffff, | |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), | |
| }, | |
| [NL80211_IFTYPE_AP] = { | |
| .tx = 0xffff, | |
| .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | | |
| BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | | |
| BIT(IEEE80211_STYPE_DISASSOC >> 4) | | |
| BIT(IEEE80211_STYPE_AUTH >> 4) | | |
| BIT(IEEE80211_STYPE_DEAUTH >> 4) | | |
| BIT(IEEE80211_STYPE_ACTION >> 4), | |
| }, | |
| [NL80211_IFTYPE_AP_VLAN] = { | |
| /* copy AP */ | |
| .tx = 0xffff, | |
| .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | | |
| BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | | |
| BIT(IEEE80211_STYPE_DISASSOC >> 4) | | |
| BIT(IEEE80211_STYPE_AUTH >> 4) | | |
| BIT(IEEE80211_STYPE_DEAUTH >> 4) | | |
| BIT(IEEE80211_STYPE_ACTION >> 4), | |
| }, | |
| [NL80211_IFTYPE_P2P_CLIENT] = { | |
| .tx = 0xffff, | |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), | |
| }, | |
| [NL80211_IFTYPE_P2P_GO] = { | |
| .tx = 0xffff, | |
| .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) | | |
| BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4) | | |
| BIT(IEEE80211_STYPE_DISASSOC >> 4) | | |
| BIT(IEEE80211_STYPE_AUTH >> 4) | | |
| BIT(IEEE80211_STYPE_DEAUTH >> 4) | | |
| BIT(IEEE80211_STYPE_ACTION >> 4), | |
| }, | |
| [NL80211_IFTYPE_MESH_POINT] = { | |
| .tx = 0xffff, | |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_AUTH >> 4) | | |
| BIT(IEEE80211_STYPE_DEAUTH >> 4), | |
| }, | |
| [NL80211_IFTYPE_P2P_DEVICE] = { | |
| .tx = 0xffff, | |
| .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | | |
| BIT(IEEE80211_STYPE_PROBE_REQ >> 4), | |
| }, | |
| }; | |
| static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { | |
| .ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR | | |
| IEEE80211_HT_AMPDU_PARM_DENSITY, | |
| .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 | | |
| IEEE80211_HT_CAP_MAX_AMSDU | | |
| IEEE80211_HT_CAP_SGI_20 | | |
| IEEE80211_HT_CAP_SGI_40 | | |
| IEEE80211_HT_CAP_LDPC_CODING | | |
| IEEE80211_HT_CAP_40MHZ_INTOLERANT), | |
| .mcs = { | |
| .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff, | |
| 0xff, 0xff, 0xff, 0xff, 0xff, }, | |
| }, | |
| }; | |
| static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = { | |
| .vht_cap_info = | |
| cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC | | |
| IEEE80211_VHT_CAP_SHORT_GI_80 | | |
| IEEE80211_VHT_CAP_SHORT_GI_160 | | |
| IEEE80211_VHT_CAP_RXSTBC_MASK | | |
| IEEE80211_VHT_CAP_TXSTBC | | |
| IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE | | |
| IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | | |
| IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN | | |
| IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN | | |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK), | |
| .supp_mcs = { | |
| .rx_mcs_map = cpu_to_le16(~0), | |
| .tx_mcs_map = cpu_to_le16(~0), | |
| }, | |
| }; | |
| struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len, | |
| const struct ieee80211_ops *ops, | |
| const char *requested_name) | |
| { | |
| struct ieee80211_local *local; | |
| int priv_size, i; | |
| struct wiphy *wiphy; | |
| bool use_chanctx; | |
| if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config || | |
| !ops->add_interface || !ops->remove_interface || | |
| !ops->configure_filter)) | |
| return NULL; | |
| if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove))) | |
| return NULL; | |
| /* check all or no channel context operations exist */ | |
| i = !!ops->add_chanctx + !!ops->remove_chanctx + | |
| !!ops->change_chanctx + !!ops->assign_vif_chanctx + | |
| !!ops->unassign_vif_chanctx; | |
| if (WARN_ON(i != 0 && i != 5)) | |
| return NULL; | |
| use_chanctx = i == 5; | |
| /* Ensure 32-byte alignment of our private data and hw private data. | |
| * We use the wiphy priv data for both our ieee80211_local and for | |
| * the driver's private data | |
| * | |
| * In memory it'll be like this: | |
| * | |
| * +-------------------------+ | |
| * | struct wiphy | | |
| * +-------------------------+ | |
| * | struct ieee80211_local | | |
| * +-------------------------+ | |
| * | driver's private data | | |
| * +-------------------------+ | |
| * | |
| */ | |
| priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len; | |
| wiphy = wiphy_new_nm(&mac80211_config_ops, priv_size, requested_name); | |
| if (!wiphy) | |
| return NULL; | |
| wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes; | |
| wiphy->privid = mac80211_wiphy_privid; | |
| wiphy->flags |= WIPHY_FLAG_NETNS_OK | | |
| WIPHY_FLAG_4ADDR_AP | | |
| WIPHY_FLAG_4ADDR_STATION | | |
| WIPHY_FLAG_REPORTS_OBSS | | |
| WIPHY_FLAG_OFFCHAN_TX; | |
| if (ops->remain_on_channel) | |
| wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; | |
| wiphy->features |= NL80211_FEATURE_SK_TX_STATUS | | |
| NL80211_FEATURE_SAE | | |
| NL80211_FEATURE_HT_IBSS | | |
| NL80211_FEATURE_VIF_TXPOWER | | |
| NL80211_FEATURE_MAC_ON_CREATE | | |
| NL80211_FEATURE_USERSPACE_MPM | | |
| NL80211_FEATURE_FULL_AP_CLIENT_STATE; | |
| wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_FILS_STA); | |
| if (!ops->hw_scan) | |
| wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN | | |
| NL80211_FEATURE_AP_SCAN; | |
| if (!ops->set_key) | |
| wiphy->flags |= WIPHY_FLAG_IBSS_RSN; | |
| wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_RRM); | |
| wiphy->bss_priv_size = sizeof(struct ieee80211_bss); | |
| local = wiphy_priv(wiphy); | |
| if (sta_info_init(local)) | |
| goto err_free; | |
| local->hw.wiphy = wiphy; | |
| local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN); | |
| local->ops = ops; | |
| local->use_chanctx = use_chanctx; | |
| /* set up some defaults */ | |
| local->hw.queues = 1; | |
| local->hw.max_rates = 1; | |
| local->hw.max_report_rates = 0; | |
| local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF; | |
| local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF; | |
| local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE; | |
| local->hw.conf.long_frame_max_tx_count = wiphy->retry_long; | |
| local->hw.conf.short_frame_max_tx_count = wiphy->retry_short; | |
| local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS | | |
| IEEE80211_RADIOTAP_MCS_HAVE_GI | | |
| IEEE80211_RADIOTAP_MCS_HAVE_BW; | |
| local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI | | |
| IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH; | |
| local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES; | |
| local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN; | |
| local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; | |
| wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask; | |
| wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask; | |
| local->ext_capa[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF; | |
| wiphy->extended_capabilities = local->ext_capa; | |
| wiphy->extended_capabilities_mask = local->ext_capa; | |
| wiphy->extended_capabilities_len = | |
| ARRAY_SIZE(local->ext_capa); | |
| INIT_LIST_HEAD(&local->interfaces); | |
| INIT_LIST_HEAD(&local->mon_list); | |
| __hw_addr_init(&local->mc_list); | |
| mutex_init(&local->iflist_mtx); | |
| mutex_init(&local->mtx); | |
| mutex_init(&local->key_mtx); | |
| spin_lock_init(&local->filter_lock); | |
| spin_lock_init(&local->rx_path_lock); | |
| spin_lock_init(&local->queue_stop_reason_lock); | |
| INIT_LIST_HEAD(&local->chanctx_list); | |
| mutex_init(&local->chanctx_mtx); | |
| INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work); | |
| INIT_WORK(&local->restart_work, ieee80211_restart_work); | |
| INIT_WORK(&local->radar_detected_work, | |
| ieee80211_dfs_radar_detected_work); | |
| INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter); | |
| local->smps_mode = IEEE80211_SMPS_OFF; | |
| INIT_WORK(&local->dynamic_ps_enable_work, | |
| ieee80211_dynamic_ps_enable_work); | |
| INIT_WORK(&local->dynamic_ps_disable_work, | |
| ieee80211_dynamic_ps_disable_work); | |
| setup_timer(&local->dynamic_ps_timer, | |
| ieee80211_dynamic_ps_timer, (unsigned long) local); | |
| INIT_WORK(&local->sched_scan_stopped_work, | |
| ieee80211_sched_scan_stopped_work); | |
| INIT_WORK(&local->tdls_chsw_work, ieee80211_tdls_chsw_work); | |
| spin_lock_init(&local->ack_status_lock); | |
| idr_init(&local->ack_status_frames); | |
| for (i = 0; i < IEEE80211_MAX_QUEUES; i++) { | |
| skb_queue_head_init(&local->pending[i]); | |
| atomic_set(&local->agg_queue_stop[i], 0); | |
| } | |
| tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending, | |
| (unsigned long)local); | |
| tasklet_init(&local->tasklet, | |
| ieee80211_tasklet_handler, | |
| (unsigned long) local); | |
| skb_queue_head_init(&local->skb_queue); | |
| skb_queue_head_init(&local->skb_queue_unreliable); | |
| skb_queue_head_init(&local->skb_queue_tdls_chsw); | |
| ieee80211_alloc_led_names(local); | |
| ieee80211_roc_setup(local); | |
| local->hw.radiotap_timestamp.units_pos = -1; | |
| local->hw.radiotap_timestamp.accuracy = -1; | |
| return &local->hw; | |
| err_free: | |
| wiphy_free(wiphy); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(ieee80211_alloc_hw_nm); | |
| static int ieee80211_init_cipher_suites(struct ieee80211_local *local) | |
| { | |
| bool have_wep = !(IS_ERR(local->wep_tx_tfm) || | |
| IS_ERR(local->wep_rx_tfm)); | |
| bool have_mfp = ieee80211_hw_check(&local->hw, MFP_CAPABLE); | |
| int n_suites = 0, r = 0, w = 0; | |
| u32 *suites; | |
| static const u32 cipher_suites[] = { | |
| /* keep WEP first, it may be removed below */ | |
| WLAN_CIPHER_SUITE_WEP40, | |
| WLAN_CIPHER_SUITE_WEP104, | |
| WLAN_CIPHER_SUITE_TKIP, | |
| WLAN_CIPHER_SUITE_CCMP, | |
| WLAN_CIPHER_SUITE_CCMP_256, | |
| WLAN_CIPHER_SUITE_GCMP, | |
| WLAN_CIPHER_SUITE_GCMP_256, | |
| /* keep last -- depends on hw flags! */ | |
| WLAN_CIPHER_SUITE_AES_CMAC, | |
| WLAN_CIPHER_SUITE_BIP_CMAC_256, | |
| WLAN_CIPHER_SUITE_BIP_GMAC_128, | |
| WLAN_CIPHER_SUITE_BIP_GMAC_256, | |
| }; | |
| if (ieee80211_hw_check(&local->hw, SW_CRYPTO_CONTROL) || | |
| local->hw.wiphy->cipher_suites) { | |
| /* If the driver advertises, or doesn't support SW crypto, | |
| * we only need to remove WEP if necessary. | |
| */ | |
| if (have_wep) | |
| return 0; | |
| /* well if it has _no_ ciphers ... fine */ | |
| if (!local->hw.wiphy->n_cipher_suites) | |
| return 0; | |
| /* Driver provides cipher suites, but we need to exclude WEP */ | |
| suites = kmemdup(local->hw.wiphy->cipher_suites, | |
| sizeof(u32) * local->hw.wiphy->n_cipher_suites, | |
| GFP_KERNEL); | |
| if (!suites) | |
| return -ENOMEM; | |
| for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) { | |
| u32 suite = local->hw.wiphy->cipher_suites[r]; | |
| if (suite == WLAN_CIPHER_SUITE_WEP40 || | |
| suite == WLAN_CIPHER_SUITE_WEP104) | |
| continue; | |
| suites[w++] = suite; | |
| } | |
| } else if (!local->hw.cipher_schemes) { | |
| /* If the driver doesn't have cipher schemes, there's nothing | |
| * else to do other than assign the (software supported and | |
| * perhaps offloaded) cipher suites. | |
| */ | |
| local->hw.wiphy->cipher_suites = cipher_suites; | |
| local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); | |
| if (!have_mfp) | |
| local->hw.wiphy->n_cipher_suites -= 4; | |
| if (!have_wep) { | |
| local->hw.wiphy->cipher_suites += 2; | |
| local->hw.wiphy->n_cipher_suites -= 2; | |
| } | |
| /* not dynamically allocated, so just return */ | |
| return 0; | |
| } else { | |
| const struct ieee80211_cipher_scheme *cs; | |
| cs = local->hw.cipher_schemes; | |
| /* Driver specifies cipher schemes only (but not cipher suites | |
| * including the schemes) | |
| * | |
| * We start counting ciphers defined by schemes, TKIP, CCMP, | |
| * CCMP-256, GCMP, and GCMP-256 | |
| */ | |
| n_suites = local->hw.n_cipher_schemes + 5; | |
| /* check if we have WEP40 and WEP104 */ | |
| if (have_wep) | |
| n_suites += 2; | |
| /* check if we have AES_CMAC, BIP-CMAC-256, BIP-GMAC-128, | |
| * BIP-GMAC-256 | |
| */ | |
| if (have_mfp) | |
| n_suites += 4; | |
| suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL); | |
| if (!suites) | |
| return -ENOMEM; | |
| suites[w++] = WLAN_CIPHER_SUITE_CCMP; | |
| suites[w++] = WLAN_CIPHER_SUITE_CCMP_256; | |
| suites[w++] = WLAN_CIPHER_SUITE_TKIP; | |
| suites[w++] = WLAN_CIPHER_SUITE_GCMP; | |
| suites[w++] = WLAN_CIPHER_SUITE_GCMP_256; | |
| if (have_wep) { | |
| suites[w++] = WLAN_CIPHER_SUITE_WEP40; | |
| suites[w++] = WLAN_CIPHER_SUITE_WEP104; | |
| } | |
| if (have_mfp) { | |
| suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC; | |
| suites[w++] = WLAN_CIPHER_SUITE_BIP_CMAC_256; | |
| suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_128; | |
| suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_256; | |
| } | |
| for (r = 0; r < local->hw.n_cipher_schemes; r++) { | |
| suites[w++] = cs[r].cipher; | |
| if (WARN_ON(cs[r].pn_len > IEEE80211_MAX_PN_LEN)) { | |
| kfree(suites); | |
| return -EINVAL; | |
| } | |
| } | |
| } | |
| local->hw.wiphy->cipher_suites = suites; | |
| local->hw.wiphy->n_cipher_suites = w; | |
| local->wiphy_ciphers_allocated = true; | |
| return 0; | |
| } | |
| int ieee80211_register_hw(struct ieee80211_hw *hw) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| int result, i; | |
| enum nl80211_band band; | |
| int channels, max_bitrates; | |
| bool supp_ht, supp_vht; | |
| netdev_features_t feature_whitelist; | |
| struct cfg80211_chan_def dflt_chandef = {}; | |
| if (ieee80211_hw_check(hw, QUEUE_CONTROL) && | |
| (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE || | |
| local->hw.offchannel_tx_hw_queue >= local->hw.queues)) | |
| return -EINVAL; | |
| if ((hw->wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) && | |
| (!local->ops->tdls_channel_switch || | |
| !local->ops->tdls_cancel_channel_switch || | |
| !local->ops->tdls_recv_channel_switch)) | |
| return -EOPNOTSUPP; | |
| if (WARN_ON(ieee80211_hw_check(hw, SUPPORTS_TX_FRAG) && | |
| !local->ops->set_frag_threshold)) | |
| return -EINVAL; | |
| if (WARN_ON(local->hw.wiphy->interface_modes & | |
| BIT(NL80211_IFTYPE_NAN) && | |
| (!local->ops->start_nan || !local->ops->stop_nan))) | |
| return -EINVAL; | |
| #ifdef CONFIG_PM | |
| if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume)) | |
| return -EINVAL; | |
| #endif | |
| if (!local->use_chanctx) { | |
| for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { | |
| const struct ieee80211_iface_combination *comb; | |
| comb = &local->hw.wiphy->iface_combinations[i]; | |
| if (comb->num_different_channels > 1) | |
| return -EINVAL; | |
| } | |
| } else { | |
| /* | |
| * WDS is currently prohibited when channel contexts are used | |
| * because there's no clear definition of which channel WDS | |
| * type interfaces use | |
| */ | |
| if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS)) | |
| return -EINVAL; | |
| /* DFS is not supported with multi-channel combinations yet */ | |
| for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { | |
| const struct ieee80211_iface_combination *comb; | |
| comb = &local->hw.wiphy->iface_combinations[i]; | |
| if (comb->radar_detect_widths && | |
| comb->num_different_channels > 1) | |
| return -EINVAL; | |
| } | |
| } | |
| /* Only HW csum features are currently compatible with mac80211 */ | |
| feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | | |
| NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA | | |
| NETIF_F_GSO_SOFTWARE | NETIF_F_RXCSUM; | |
| if (WARN_ON(hw->netdev_features & ~feature_whitelist)) | |
| return -EINVAL; | |
| if (hw->max_report_rates == 0) | |
| hw->max_report_rates = hw->max_rates; | |
| local->rx_chains = 1; | |
| /* | |
| * generic code guarantees at least one band, | |
| * set this very early because much code assumes | |
| * that hw.conf.channel is assigned | |
| */ | |
| channels = 0; | |
| max_bitrates = 0; | |
| supp_ht = false; | |
| supp_vht = false; | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { | |
| struct ieee80211_supported_band *sband; | |
| sband = local->hw.wiphy->bands[band]; | |
| if (!sband) | |
| continue; | |
| if (!dflt_chandef.chan) { | |
| cfg80211_chandef_create(&dflt_chandef, | |
| &sband->channels[0], | |
| NL80211_CHAN_NO_HT); | |
| /* init channel we're on */ | |
| if (!local->use_chanctx && !local->_oper_chandef.chan) { | |
| local->hw.conf.chandef = dflt_chandef; | |
| local->_oper_chandef = dflt_chandef; | |
| } | |
| local->monitor_chandef = dflt_chandef; | |
| } | |
| channels += sband->n_channels; | |
| if (max_bitrates < sband->n_bitrates) | |
| max_bitrates = sband->n_bitrates; | |
| supp_ht = supp_ht || sband->ht_cap.ht_supported; | |
| supp_vht = supp_vht || sband->vht_cap.vht_supported; | |
| if (!sband->ht_cap.ht_supported) | |
| continue; | |
| /* TODO: consider VHT for RX chains, hopefully it's the same */ | |
| local->rx_chains = | |
| max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs), | |
| local->rx_chains); | |
| /* no need to mask, SM_PS_DISABLED has all bits set */ | |
| sband->ht_cap.cap |= WLAN_HT_CAP_SM_PS_DISABLED << | |
| IEEE80211_HT_CAP_SM_PS_SHIFT; | |
| } | |
| /* if low-level driver supports AP, we also support VLAN */ | |
| if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) { | |
| hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN); | |
| hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN); | |
| } | |
| /* mac80211 always supports monitor */ | |
| hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); | |
| hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR); | |
| /* mac80211 doesn't support more than one IBSS interface right now */ | |
| for (i = 0; i < hw->wiphy->n_iface_combinations; i++) { | |
| const struct ieee80211_iface_combination *c; | |
| int j; | |
| c = &hw->wiphy->iface_combinations[i]; | |
| for (j = 0; j < c->n_limits; j++) | |
| if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) && | |
| c->limits[j].max > 1) | |
| return -EINVAL; | |
| } | |
| local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) + | |
| sizeof(void *) * channels, GFP_KERNEL); | |
| if (!local->int_scan_req) | |
| return -ENOMEM; | |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { | |
| if (!local->hw.wiphy->bands[band]) | |
| continue; | |
| local->int_scan_req->rates[band] = (u32) -1; | |
| } | |
| #ifndef CONFIG_MAC80211_MESH | |
| /* mesh depends on Kconfig, but drivers should set it if they want */ | |
| local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT); | |
| #endif | |
| /* if the underlying driver supports mesh, mac80211 will (at least) | |
| * provide routing of mesh authentication frames to userspace */ | |
| if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT)) | |
| local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH; | |
| /* mac80211 supports control port protocol changing */ | |
| local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL; | |
| if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) { | |
| local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; | |
| } else if (ieee80211_hw_check(&local->hw, SIGNAL_UNSPEC)) { | |
| local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC; | |
| if (hw->max_signal <= 0) { | |
| result = -EINVAL; | |
| goto fail_wiphy_register; | |
| } | |
| } | |
| /* | |
| * Calculate scan IE length -- we need this to alloc | |
| * memory and to subtract from the driver limit. It | |
| * includes the DS Params, (extended) supported rates, and HT | |
| * information -- SSID is the driver's responsibility. | |
| */ | |
| local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ + | |
| 3 /* DS Params */; | |
| if (supp_ht) | |
| local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap); | |
| if (supp_vht) | |
| local->scan_ies_len += | |
| 2 + sizeof(struct ieee80211_vht_cap); | |
| if (!local->ops->hw_scan) { | |
| /* For hw_scan, driver needs to set these up. */ | |
| local->hw.wiphy->max_scan_ssids = 4; | |
| local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN; | |
| } | |
| /* | |
| * If the driver supports any scan IEs, then assume the | |
| * limit includes the IEs mac80211 will add, otherwise | |
| * leave it at zero and let the driver sort it out; we | |
| * still pass our IEs to the driver but userspace will | |
| * not be allowed to in that case. | |
| */ | |
| if (local->hw.wiphy->max_scan_ie_len) | |
| local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len; | |
| WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes, | |
| local->hw.n_cipher_schemes)); | |
| result = ieee80211_init_cipher_suites(local); | |
| if (result < 0) | |
| goto fail_wiphy_register; | |
| if (!local->ops->remain_on_channel) | |
| local->hw.wiphy->max_remain_on_channel_duration = 5000; | |
| /* mac80211 based drivers don't support internal TDLS setup */ | |
| if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) | |
| local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP; | |
| /* mac80211 supports eCSA, if the driver supports STA CSA at all */ | |
| if (ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) | |
| local->ext_capa[0] |= WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING; | |
| local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM; | |
| result = wiphy_register(local->hw.wiphy); | |
| if (result < 0) | |
| goto fail_wiphy_register; | |
| /* | |
| * We use the number of queues for feature tests (QoS, HT) internally | |
| * so restrict them appropriately. | |
| */ | |
| if (hw->queues > IEEE80211_MAX_QUEUES) | |
| hw->queues = IEEE80211_MAX_QUEUES; | |
| local->workqueue = | |
| alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy)); | |
| if (!local->workqueue) { | |
| result = -ENOMEM; | |
| goto fail_workqueue; | |
| } | |
| /* | |
| * The hardware needs headroom for sending the frame, | |
| * and we need some headroom for passing the frame to monitor | |
| * interfaces, but never both at the same time. | |
| */ | |
| local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom, | |
| IEEE80211_TX_STATUS_HEADROOM); | |
| debugfs_hw_add(local); | |
| /* | |
| * if the driver doesn't specify a max listen interval we | |
| * use 5 which should be a safe default | |
| */ | |
| if (local->hw.max_listen_interval == 0) | |
| local->hw.max_listen_interval = 5; | |
| local->hw.conf.listen_interval = local->hw.max_listen_interval; | |
| local->dynamic_ps_forced_timeout = -1; | |
| if (!local->hw.max_nan_de_entries) | |
| local->hw.max_nan_de_entries = IEEE80211_MAX_NAN_INSTANCE_ID; | |
| result = ieee80211_wep_init(local); | |
| if (result < 0) | |
| wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n", | |
| result); | |
| local->hw.conf.flags = IEEE80211_CONF_IDLE; | |
| ieee80211_led_init(local); | |
| rtnl_lock(); | |
| result = ieee80211_init_rate_ctrl_alg(local, | |
| hw->rate_control_algorithm); | |
| if (result < 0) { | |
| wiphy_debug(local->hw.wiphy, | |
| "Failed to initialize rate control algorithm\n"); | |
| goto fail_rate; | |
| } | |
| /* add one default STA interface if supported */ | |
| if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) && | |
| !ieee80211_hw_check(hw, NO_AUTO_VIF)) { | |
| result = ieee80211_if_add(local, "wlan%d", NET_NAME_ENUM, NULL, | |
| NL80211_IFTYPE_STATION, NULL); | |
| if (result) | |
| wiphy_warn(local->hw.wiphy, | |
| "Failed to add default virtual iface\n"); | |
| } | |
| rtnl_unlock(); | |
| result = ieee80211_txq_setup_flows(local); | |
| if (result) | |
| goto fail_flows; | |
| #ifdef CONFIG_INET | |
| local->ifa_notifier.notifier_call = ieee80211_ifa_changed; | |
| result = register_inetaddr_notifier(&local->ifa_notifier); | |
| if (result) | |
| goto fail_ifa; | |
| #endif | |
| #if IS_ENABLED(CONFIG_IPV6) | |
| local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed; | |
| result = register_inet6addr_notifier(&local->ifa6_notifier); | |
| if (result) | |
| goto fail_ifa6; | |
| #endif | |
| return 0; | |
| #if IS_ENABLED(CONFIG_IPV6) | |
| fail_ifa6: | |
| #ifdef CONFIG_INET | |
| unregister_inetaddr_notifier(&local->ifa_notifier); | |
| #endif | |
| #endif | |
| #if defined(CONFIG_INET) || defined(CONFIG_IPV6) | |
| fail_ifa: | |
| #endif | |
| ieee80211_txq_teardown_flows(local); | |
| fail_flows: | |
| rtnl_lock(); | |
| rate_control_deinitialize(local); | |
| ieee80211_remove_interfaces(local); | |
| fail_rate: | |
| rtnl_unlock(); | |
| ieee80211_led_exit(local); | |
| ieee80211_wep_free(local); | |
| destroy_workqueue(local->workqueue); | |
| fail_workqueue: | |
| wiphy_unregister(local->hw.wiphy); | |
| fail_wiphy_register: | |
| if (local->wiphy_ciphers_allocated) | |
| kfree(local->hw.wiphy->cipher_suites); | |
| kfree(local->int_scan_req); | |
| return result; | |
| } | |
| EXPORT_SYMBOL(ieee80211_register_hw); | |
| void ieee80211_unregister_hw(struct ieee80211_hw *hw) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| tasklet_kill(&local->tx_pending_tasklet); | |
| tasklet_kill(&local->tasklet); | |
| #ifdef CONFIG_INET | |
| unregister_inetaddr_notifier(&local->ifa_notifier); | |
| #endif | |
| #if IS_ENABLED(CONFIG_IPV6) | |
| unregister_inet6addr_notifier(&local->ifa6_notifier); | |
| #endif | |
| ieee80211_txq_teardown_flows(local); | |
| rtnl_lock(); | |
| /* | |
| * At this point, interface list manipulations are fine | |
| * because the driver cannot be handing us frames any | |
| * more and the tasklet is killed. | |
| */ | |
| ieee80211_remove_interfaces(local); | |
| rtnl_unlock(); | |
| cancel_delayed_work_sync(&local->roc_work); | |
| cancel_work_sync(&local->restart_work); | |
| cancel_work_sync(&local->reconfig_filter); | |
| cancel_work_sync(&local->tdls_chsw_work); | |
| flush_work(&local->sched_scan_stopped_work); | |
| flush_work(&local->radar_detected_work); | |
| ieee80211_clear_tx_pending(local); | |
| rate_control_deinitialize(local); | |
| if (skb_queue_len(&local->skb_queue) || | |
| skb_queue_len(&local->skb_queue_unreliable)) | |
| wiphy_warn(local->hw.wiphy, "skb_queue not empty\n"); | |
| skb_queue_purge(&local->skb_queue); | |
| skb_queue_purge(&local->skb_queue_unreliable); | |
| skb_queue_purge(&local->skb_queue_tdls_chsw); | |
| destroy_workqueue(local->workqueue); | |
| wiphy_unregister(local->hw.wiphy); | |
| ieee80211_wep_free(local); | |
| ieee80211_led_exit(local); | |
| kfree(local->int_scan_req); | |
| } | |
| EXPORT_SYMBOL(ieee80211_unregister_hw); | |
| static int ieee80211_free_ack_frame(int id, void *p, void *data) | |
| { | |
| WARN_ONCE(1, "Have pending ack frames!\n"); | |
| kfree_skb(p); | |
| return 0; | |
| } | |
| void ieee80211_free_hw(struct ieee80211_hw *hw) | |
| { | |
| struct ieee80211_local *local = hw_to_local(hw); | |
| mutex_destroy(&local->iflist_mtx); | |
| mutex_destroy(&local->mtx); | |
| if (local->wiphy_ciphers_allocated) | |
| kfree(local->hw.wiphy->cipher_suites); | |
| idr_for_each(&local->ack_status_frames, | |
| ieee80211_free_ack_frame, NULL); | |
| idr_destroy(&local->ack_status_frames); | |
| sta_info_stop(local); | |
| ieee80211_free_led_names(local); | |
| wiphy_free(local->hw.wiphy); | |
| } | |
| EXPORT_SYMBOL(ieee80211_free_hw); | |
| static int __init ieee80211_init(void) | |
| { | |
| struct sk_buff *skb; | |
| int ret; | |
| BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb)); | |
| BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) + | |
| IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb)); | |
| ret = rc80211_minstrel_init(); | |
| if (ret) | |
| return ret; | |
| ret = rc80211_minstrel_ht_init(); | |
| if (ret) | |
| goto err_minstrel; | |
| ret = ieee80211_iface_init(); | |
| if (ret) | |
| goto err_netdev; | |
| return 0; | |
| err_netdev: | |
| rc80211_minstrel_ht_exit(); | |
| err_minstrel: | |
| rc80211_minstrel_exit(); | |
| return ret; | |
| } | |
| static void __exit ieee80211_exit(void) | |
| { | |
| rc80211_minstrel_ht_exit(); | |
| rc80211_minstrel_exit(); | |
| ieee80211s_stop(); | |
| ieee80211_iface_exit(); | |
| rcu_barrier(); | |
| } | |
| subsys_initcall(ieee80211_init); | |
| module_exit(ieee80211_exit); | |
| MODULE_DESCRIPTION("IEEE 802.11 subsystem"); | |
| MODULE_LICENSE("GPL"); |