| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * linux/kernel/irq/autoprobe.c | |
| * | |
| * Copyright (C) 1992, 1998-2004 Linus Torvalds, Ingo Molnar | |
| * | |
| * This file contains the interrupt probing code and driver APIs. | |
| */ | |
| #include <linux/irq.h> | |
| #include <linux/module.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #include <linux/async.h> | |
| #include "internals.h" | |
| /* | |
| * Autodetection depends on the fact that any interrupt that | |
| * comes in on to an unassigned handler will get stuck with | |
| * "IRQS_WAITING" cleared and the interrupt disabled. | |
| */ | |
| static DEFINE_MUTEX(probing_active); | |
| /** | |
| * probe_irq_on - begin an interrupt autodetect | |
| * | |
| * Commence probing for an interrupt. The interrupts are scanned | |
| * and a mask of potential interrupt lines is returned. | |
| * | |
| */ | |
| unsigned long probe_irq_on(void) | |
| { | |
| struct irq_desc *desc; | |
| unsigned long mask = 0; | |
| int i; | |
| /* | |
| * quiesce the kernel, or at least the asynchronous portion | |
| */ | |
| async_synchronize_full(); | |
| mutex_lock(&probing_active); | |
| /* | |
| * something may have generated an irq long ago and we want to | |
| * flush such a longstanding irq before considering it as spurious. | |
| */ | |
| for_each_irq_desc_reverse(i, desc) { | |
| raw_spin_lock_irq(&desc->lock); | |
| if (!desc->action && irq_settings_can_probe(desc)) { | |
| /* | |
| * Some chips need to know about probing in | |
| * progress: | |
| */ | |
| if (desc->irq_data.chip->irq_set_type) | |
| desc->irq_data.chip->irq_set_type(&desc->irq_data, | |
| IRQ_TYPE_PROBE); | |
| irq_startup(desc, IRQ_NORESEND, IRQ_START_FORCE); | |
| } | |
| raw_spin_unlock_irq(&desc->lock); | |
| } | |
| /* Wait for longstanding interrupts to trigger. */ | |
| msleep(20); | |
| /* | |
| * enable any unassigned irqs | |
| * (we must startup again here because if a longstanding irq | |
| * happened in the previous stage, it may have masked itself) | |
| */ | |
| for_each_irq_desc_reverse(i, desc) { | |
| raw_spin_lock_irq(&desc->lock); | |
| if (!desc->action && irq_settings_can_probe(desc)) { | |
| desc->istate |= IRQS_AUTODETECT | IRQS_WAITING; | |
| if (irq_startup(desc, IRQ_NORESEND, IRQ_START_FORCE)) | |
| desc->istate |= IRQS_PENDING; | |
| } | |
| raw_spin_unlock_irq(&desc->lock); | |
| } | |
| /* | |
| * Wait for spurious interrupts to trigger | |
| */ | |
| msleep(100); | |
| /* | |
| * Now filter out any obviously spurious interrupts | |
| */ | |
| for_each_irq_desc(i, desc) { | |
| raw_spin_lock_irq(&desc->lock); | |
| if (desc->istate & IRQS_AUTODETECT) { | |
| /* It triggered already - consider it spurious. */ | |
| if (!(desc->istate & IRQS_WAITING)) { | |
| desc->istate &= ~IRQS_AUTODETECT; | |
| irq_shutdown(desc); | |
| } else | |
| if (i < 32) | |
| mask |= 1 << i; | |
| } | |
| raw_spin_unlock_irq(&desc->lock); | |
| } | |
| return mask; | |
| } | |
| EXPORT_SYMBOL(probe_irq_on); | |
| /** | |
| * probe_irq_mask - scan a bitmap of interrupt lines | |
| * @val: mask of interrupts to consider | |
| * | |
| * Scan the interrupt lines and return a bitmap of active | |
| * autodetect interrupts. The interrupt probe logic state | |
| * is then returned to its previous value. | |
| * | |
| * Note: we need to scan all the irq's even though we will | |
| * only return autodetect irq numbers - just so that we reset | |
| * them all to a known state. | |
| */ | |
| unsigned int probe_irq_mask(unsigned long val) | |
| { | |
| unsigned int mask = 0; | |
| struct irq_desc *desc; | |
| int i; | |
| for_each_irq_desc(i, desc) { | |
| raw_spin_lock_irq(&desc->lock); | |
| if (desc->istate & IRQS_AUTODETECT) { | |
| if (i < 16 && !(desc->istate & IRQS_WAITING)) | |
| mask |= 1 << i; | |
| desc->istate &= ~IRQS_AUTODETECT; | |
| irq_shutdown(desc); | |
| } | |
| raw_spin_unlock_irq(&desc->lock); | |
| } | |
| mutex_unlock(&probing_active); | |
| return mask & val; | |
| } | |
| EXPORT_SYMBOL(probe_irq_mask); | |
| /** | |
| * probe_irq_off - end an interrupt autodetect | |
| * @val: mask of potential interrupts (unused) | |
| * | |
| * Scans the unused interrupt lines and returns the line which | |
| * appears to have triggered the interrupt. If no interrupt was | |
| * found then zero is returned. If more than one interrupt is | |
| * found then minus the first candidate is returned to indicate | |
| * their is doubt. | |
| * | |
| * The interrupt probe logic state is returned to its previous | |
| * value. | |
| * | |
| * BUGS: When used in a module (which arguably shouldn't happen) | |
| * nothing prevents two IRQ probe callers from overlapping. The | |
| * results of this are non-optimal. | |
| */ | |
| int probe_irq_off(unsigned long val) | |
| { | |
| int i, irq_found = 0, nr_of_irqs = 0; | |
| struct irq_desc *desc; | |
| for_each_irq_desc(i, desc) { | |
| raw_spin_lock_irq(&desc->lock); | |
| if (desc->istate & IRQS_AUTODETECT) { | |
| if (!(desc->istate & IRQS_WAITING)) { | |
| if (!nr_of_irqs) | |
| irq_found = i; | |
| nr_of_irqs++; | |
| } | |
| desc->istate &= ~IRQS_AUTODETECT; | |
| irq_shutdown(desc); | |
| } | |
| raw_spin_unlock_irq(&desc->lock); | |
| } | |
| mutex_unlock(&probing_active); | |
| if (nr_of_irqs > 1) | |
| irq_found = -irq_found; | |
| return irq_found; | |
| } | |
| EXPORT_SYMBOL(probe_irq_off); | |