| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * linux/fs/ext4/fsync.c | |
| * | |
| * Copyright (C) 1993 Stephen Tweedie (sct@redhat.com) | |
| * from | |
| * Copyright (C) 1992 Remy Card (card@masi.ibp.fr) | |
| * Laboratoire MASI - Institut Blaise Pascal | |
| * Universite Pierre et Marie Curie (Paris VI) | |
| * from | |
| * linux/fs/minix/truncate.c Copyright (C) 1991, 1992 Linus Torvalds | |
| * | |
| * ext4fs fsync primitive | |
| * | |
| * Big-endian to little-endian byte-swapping/bitmaps by | |
| * David S. Miller (davem@caip.rutgers.edu), 1995 | |
| * | |
| * Removed unnecessary code duplication for little endian machines | |
| * and excessive __inline__s. | |
| * Andi Kleen, 1997 | |
| * | |
| * Major simplications and cleanup - we only need to do the metadata, because | |
| * we can depend on generic_block_fdatasync() to sync the data blocks. | |
| */ | |
| #include <linux/time.h> | |
| #include <linux/fs.h> | |
| #include <linux/sched.h> | |
| #include <linux/writeback.h> | |
| #include <linux/blkdev.h> | |
| #include "ext4.h" | |
| #include "ext4_jbd2.h" | |
| #include <trace/events/ext4.h> | |
| /* | |
| * If we're not journaling and this is a just-created file, we have to | |
| * sync our parent directory (if it was freshly created) since | |
| * otherwise it will only be written by writeback, leaving a huge | |
| * window during which a crash may lose the file. This may apply for | |
| * the parent directory's parent as well, and so on recursively, if | |
| * they are also freshly created. | |
| */ | |
| static int ext4_sync_parent(struct inode *inode) | |
| { | |
| struct dentry *dentry = NULL; | |
| struct inode *next; | |
| int ret = 0; | |
| if (!ext4_test_inode_state(inode, EXT4_STATE_NEWENTRY)) | |
| return 0; | |
| inode = igrab(inode); | |
| while (ext4_test_inode_state(inode, EXT4_STATE_NEWENTRY)) { | |
| ext4_clear_inode_state(inode, EXT4_STATE_NEWENTRY); | |
| dentry = d_find_any_alias(inode); | |
| if (!dentry) | |
| break; | |
| next = igrab(d_inode(dentry->d_parent)); | |
| dput(dentry); | |
| if (!next) | |
| break; | |
| iput(inode); | |
| inode = next; | |
| /* | |
| * The directory inode may have gone through rmdir by now. But | |
| * the inode itself and its blocks are still allocated (we hold | |
| * a reference to the inode so it didn't go through | |
| * ext4_evict_inode()) and so we are safe to flush metadata | |
| * blocks and the inode. | |
| */ | |
| ret = sync_mapping_buffers(inode->i_mapping); | |
| if (ret) | |
| break; | |
| ret = sync_inode_metadata(inode, 1); | |
| if (ret) | |
| break; | |
| } | |
| iput(inode); | |
| return ret; | |
| } | |
| /* | |
| * akpm: A new design for ext4_sync_file(). | |
| * | |
| * This is only called from sys_fsync(), sys_fdatasync() and sys_msync(). | |
| * There cannot be a transaction open by this task. | |
| * Another task could have dirtied this inode. Its data can be in any | |
| * state in the journalling system. | |
| * | |
| * What we do is just kick off a commit and wait on it. This will snapshot the | |
| * inode to disk. | |
| */ | |
| int ext4_sync_file(struct file *file, loff_t start, loff_t end, int datasync) | |
| { | |
| struct inode *inode = file->f_mapping->host; | |
| struct ext4_inode_info *ei = EXT4_I(inode); | |
| journal_t *journal = EXT4_SB(inode->i_sb)->s_journal; | |
| int ret = 0, err; | |
| tid_t commit_tid; | |
| bool needs_barrier = false; | |
| if (unlikely(ext4_forced_shutdown(EXT4_SB(inode->i_sb)))) | |
| return -EIO; | |
| J_ASSERT(ext4_journal_current_handle() == NULL); | |
| trace_ext4_sync_file_enter(file, datasync); | |
| if (sb_rdonly(inode->i_sb)) { | |
| /* Make sure that we read updated s_mount_flags value */ | |
| smp_rmb(); | |
| if (EXT4_SB(inode->i_sb)->s_mount_flags & EXT4_MF_FS_ABORTED) | |
| ret = -EROFS; | |
| goto out; | |
| } | |
| if (!journal) { | |
| ret = __generic_file_fsync(file, start, end, datasync); | |
| if (!ret) | |
| ret = ext4_sync_parent(inode); | |
| if (test_opt(inode->i_sb, BARRIER)) | |
| goto issue_flush; | |
| goto out; | |
| } | |
| ret = file_write_and_wait_range(file, start, end); | |
| if (ret) | |
| return ret; | |
| /* | |
| * data=writeback,ordered: | |
| * The caller's filemap_fdatawrite()/wait will sync the data. | |
| * Metadata is in the journal, we wait for proper transaction to | |
| * commit here. | |
| * | |
| * data=journal: | |
| * filemap_fdatawrite won't do anything (the buffers are clean). | |
| * ext4_force_commit will write the file data into the journal and | |
| * will wait on that. | |
| * filemap_fdatawait() will encounter a ton of newly-dirtied pages | |
| * (they were dirtied by commit). But that's OK - the blocks are | |
| * safe in-journal, which is all fsync() needs to ensure. | |
| */ | |
| if (ext4_should_journal_data(inode)) { | |
| ret = ext4_force_commit(inode->i_sb); | |
| goto out; | |
| } | |
| commit_tid = datasync ? ei->i_datasync_tid : ei->i_sync_tid; | |
| if (journal->j_flags & JBD2_BARRIER && | |
| !jbd2_trans_will_send_data_barrier(journal, commit_tid)) | |
| needs_barrier = true; | |
| ret = jbd2_complete_transaction(journal, commit_tid); | |
| if (needs_barrier) { | |
| issue_flush: | |
| err = blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL, NULL); | |
| if (!ret) | |
| ret = err; | |
| } | |
| out: | |
| err = file_check_and_advance_wb_err(file); | |
| if (ret == 0) | |
| ret = err; | |
| trace_ext4_sync_file_exit(inode, ret); | |
| return ret; | |
| } |