| /* | |
| * Copyright 2010 Tilera Corporation. All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation, version 2. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or | |
| * NON INFRINGEMENT. See the GNU General Public License for | |
| * more details. | |
| * | |
| * copy new kernel into place and then call hv_reexec | |
| * | |
| */ | |
| #include <linux/linkage.h> | |
| #include <arch/chip.h> | |
| #include <asm/page.h> | |
| #include <hv/hypervisor.h> | |
| #undef RELOCATE_NEW_KERNEL_VERBOSE | |
| STD_ENTRY(relocate_new_kernel) | |
| move r30, r0 /* page list */ | |
| move r31, r1 /* address of page we are on */ | |
| move r32, r2 /* start address of new kernel */ | |
| shri r1, r1, PAGE_SHIFT | |
| addi r1, r1, 1 | |
| shli sp, r1, PAGE_SHIFT | |
| addi sp, sp, -8 | |
| /* we now have a stack (whether we need one or not) */ | |
| moveli r40, lo16(hv_console_putc) | |
| auli r40, r40, ha16(hv_console_putc) | |
| #ifdef RELOCATE_NEW_KERNEL_VERBOSE | |
| moveli r0, 'r' | |
| jalr r40 | |
| moveli r0, '_' | |
| jalr r40 | |
| moveli r0, 'n' | |
| jalr r40 | |
| moveli r0, '_' | |
| jalr r40 | |
| moveli r0, 'k' | |
| jalr r40 | |
| moveli r0, '\n' | |
| jalr r40 | |
| #endif | |
| /* | |
| * Throughout this code r30 is pointer to the element of page | |
| * list we are working on. | |
| * | |
| * Normally we get to the next element of the page list by | |
| * incrementing r30 by four. The exception is if the element | |
| * on the page list is an IND_INDIRECTION in which case we use | |
| * the element with the low bits masked off as the new value | |
| * of r30. | |
| * | |
| * To get this started, we need the value passed to us (which | |
| * will always be an IND_INDIRECTION) in memory somewhere with | |
| * r30 pointing at it. To do that, we push the value passed | |
| * to us on the stack and make r30 point to it. | |
| */ | |
| sw sp, r30 | |
| move r30, sp | |
| addi sp, sp, -8 | |
| /* | |
| * On TILEPro, we need to flush all tiles' caches, since we may | |
| * have been doing hash-for-home caching there. Note that we | |
| * must do this _after_ we're completely done modifying any memory | |
| * other than our output buffer (which we know is locally cached). | |
| * We want the caches to be fully clean when we do the reexec, | |
| * because the hypervisor is going to do this flush again at that | |
| * point, and we don't want that second flush to overwrite any memory. | |
| */ | |
| { | |
| move r0, zero /* cache_pa */ | |
| move r1, zero | |
| } | |
| { | |
| auli r2, zero, ha16(HV_FLUSH_EVICT_L2) /* cache_control */ | |
| movei r3, -1 /* cache_cpumask; -1 means all client tiles */ | |
| } | |
| { | |
| move r4, zero /* tlb_va */ | |
| move r5, zero /* tlb_length */ | |
| } | |
| { | |
| move r6, zero /* tlb_pgsize */ | |
| move r7, zero /* tlb_cpumask */ | |
| } | |
| { | |
| move r8, zero /* asids */ | |
| moveli r20, lo16(hv_flush_remote) | |
| } | |
| { | |
| move r9, zero /* asidcount */ | |
| auli r20, r20, ha16(hv_flush_remote) | |
| } | |
| jalr r20 | |
| /* r33 is destination pointer, default to zero */ | |
| moveli r33, 0 | |
| .Lloop: lw r10, r30 | |
| andi r9, r10, 0xf /* low 4 bits tell us what type it is */ | |
| xor r10, r10, r9 /* r10 is now value with low 4 bits stripped */ | |
| seqi r0, r9, 0x1 /* IND_DESTINATION */ | |
| bzt r0, .Ltry2 | |
| move r33, r10 | |
| #ifdef RELOCATE_NEW_KERNEL_VERBOSE | |
| moveli r0, 'd' | |
| jalr r40 | |
| #endif | |
| addi r30, r30, 4 | |
| j .Lloop | |
| .Ltry2: | |
| seqi r0, r9, 0x2 /* IND_INDIRECTION */ | |
| bzt r0, .Ltry4 | |
| move r30, r10 | |
| #ifdef RELOCATE_NEW_KERNEL_VERBOSE | |
| moveli r0, 'i' | |
| jalr r40 | |
| #endif | |
| j .Lloop | |
| .Ltry4: | |
| seqi r0, r9, 0x4 /* IND_DONE */ | |
| bzt r0, .Ltry8 | |
| mf | |
| #ifdef RELOCATE_NEW_KERNEL_VERBOSE | |
| moveli r0, 'D' | |
| jalr r40 | |
| moveli r0, '\n' | |
| jalr r40 | |
| #endif | |
| move r0, r32 | |
| moveli r1, 0 /* arg to hv_reexec is 64 bits */ | |
| moveli r41, lo16(hv_reexec) | |
| auli r41, r41, ha16(hv_reexec) | |
| jalr r41 | |
| /* we should not get here */ | |
| moveli r0, '?' | |
| jalr r40 | |
| moveli r0, '\n' | |
| jalr r40 | |
| j .Lhalt | |
| .Ltry8: seqi r0, r9, 0x8 /* IND_SOURCE */ | |
| bz r0, .Lerr /* unknown type */ | |
| /* copy page at r10 to page at r33 */ | |
| move r11, r33 | |
| moveli r0, lo16(PAGE_SIZE) | |
| auli r0, r0, ha16(PAGE_SIZE) | |
| add r33, r33, r0 | |
| /* copy word at r10 to word at r11 until r11 equals r33 */ | |
| /* We know page size must be multiple of 16, so we can unroll | |
| * 16 times safely without any edge case checking. | |
| * | |
| * Issue a flush of the destination every 16 words to avoid | |
| * incoherence when starting the new kernel. (Now this is | |
| * just good paranoia because the hv_reexec call will also | |
| * take care of this.) | |
| */ | |
| 1: | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0; addi r11, r11, 4 } | |
| { lw r0, r10; addi r10, r10, 4 } | |
| { sw r11, r0 } | |
| { flush r11 ; addi r11, r11, 4 } | |
| seq r0, r33, r11 | |
| bzt r0, 1b | |
| #ifdef RELOCATE_NEW_KERNEL_VERBOSE | |
| moveli r0, 's' | |
| jalr r40 | |
| #endif | |
| addi r30, r30, 4 | |
| j .Lloop | |
| .Lerr: moveli r0, 'e' | |
| jalr r40 | |
| moveli r0, 'r' | |
| jalr r40 | |
| moveli r0, 'r' | |
| jalr r40 | |
| moveli r0, '\n' | |
| jalr r40 | |
| .Lhalt: | |
| moveli r41, lo16(hv_halt) | |
| auli r41, r41, ha16(hv_halt) | |
| jalr r41 | |
| STD_ENDPROC(relocate_new_kernel) | |
| .section .rodata,"a" | |
| .globl relocate_new_kernel_size | |
| relocate_new_kernel_size: | |
| .long .Lend_relocate_new_kernel - relocate_new_kernel |