| /* | |
| * Derived from "arch/i386/kernel/process.c" | |
| * Copyright (C) 1995 Linus Torvalds | |
| * | |
| * Updated and modified by Cort Dougan (cort@cs.nmt.edu) and | |
| * Paul Mackerras (paulus@cs.anu.edu.au) | |
| * | |
| * PowerPC version | |
| * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/debug.h> | |
| #include <linux/sched/task.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/stddef.h> | |
| #include <linux/unistd.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/slab.h> | |
| #include <linux/user.h> | |
| #include <linux/elf.h> | |
| #include <linux/prctl.h> | |
| #include <linux/init_task.h> | |
| #include <linux/export.h> | |
| #include <linux/kallsyms.h> | |
| #include <linux/mqueue.h> | |
| #include <linux/hardirq.h> | |
| #include <linux/utsname.h> | |
| #include <linux/ftrace.h> | |
| #include <linux/kernel_stat.h> | |
| #include <linux/personality.h> | |
| #include <linux/random.h> | |
| #include <linux/hw_breakpoint.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/elf-randomize.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/io.h> | |
| #include <asm/processor.h> | |
| #include <asm/mmu.h> | |
| #include <asm/prom.h> | |
| #include <asm/machdep.h> | |
| #include <asm/time.h> | |
| #include <asm/runlatch.h> | |
| #include <asm/syscalls.h> | |
| #include <asm/switch_to.h> | |
| #include <asm/tm.h> | |
| #include <asm/debug.h> | |
| #ifdef CONFIG_PPC64 | |
| #include <asm/firmware.h> | |
| #endif | |
| #include <asm/code-patching.h> | |
| #include <asm/exec.h> | |
| #include <asm/livepatch.h> | |
| #include <asm/cpu_has_feature.h> | |
| #include <asm/asm-prototypes.h> | |
| #include <linux/kprobes.h> | |
| #include <linux/kdebug.h> | |
| /* Transactional Memory debug */ | |
| #ifdef TM_DEBUG_SW | |
| #define TM_DEBUG(x...) printk(KERN_INFO x) | |
| #else | |
| #define TM_DEBUG(x...) do { } while(0) | |
| #endif | |
| extern unsigned long _get_SP(void); | |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | |
| static void check_if_tm_restore_required(struct task_struct *tsk) | |
| { | |
| /* | |
| * If we are saving the current thread's registers, and the | |
| * thread is in a transactional state, set the TIF_RESTORE_TM | |
| * bit so that we know to restore the registers before | |
| * returning to userspace. | |
| */ | |
| if (tsk == current && tsk->thread.regs && | |
| MSR_TM_ACTIVE(tsk->thread.regs->msr) && | |
| !test_thread_flag(TIF_RESTORE_TM)) { | |
| tsk->thread.ckpt_regs.msr = tsk->thread.regs->msr; | |
| set_thread_flag(TIF_RESTORE_TM); | |
| } | |
| } | |
| static inline bool msr_tm_active(unsigned long msr) | |
| { | |
| return MSR_TM_ACTIVE(msr); | |
| } | |
| #else | |
| static inline bool msr_tm_active(unsigned long msr) { return false; } | |
| static inline void check_if_tm_restore_required(struct task_struct *tsk) { } | |
| #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ | |
| bool strict_msr_control; | |
| EXPORT_SYMBOL(strict_msr_control); | |
| static int __init enable_strict_msr_control(char *str) | |
| { | |
| strict_msr_control = true; | |
| pr_info("Enabling strict facility control\n"); | |
| return 0; | |
| } | |
| early_param("ppc_strict_facility_enable", enable_strict_msr_control); | |
| unsigned long msr_check_and_set(unsigned long bits) | |
| { | |
| unsigned long oldmsr = mfmsr(); | |
| unsigned long newmsr; | |
| newmsr = oldmsr | bits; | |
| #ifdef CONFIG_VSX | |
| if (cpu_has_feature(CPU_FTR_VSX) && (bits & MSR_FP)) | |
| newmsr |= MSR_VSX; | |
| #endif | |
| if (oldmsr != newmsr) | |
| mtmsr_isync(newmsr); | |
| return newmsr; | |
| } | |
| void __msr_check_and_clear(unsigned long bits) | |
| { | |
| unsigned long oldmsr = mfmsr(); | |
| unsigned long newmsr; | |
| newmsr = oldmsr & ~bits; | |
| #ifdef CONFIG_VSX | |
| if (cpu_has_feature(CPU_FTR_VSX) && (bits & MSR_FP)) | |
| newmsr &= ~MSR_VSX; | |
| #endif | |
| if (oldmsr != newmsr) | |
| mtmsr_isync(newmsr); | |
| } | |
| EXPORT_SYMBOL(__msr_check_and_clear); | |
| #ifdef CONFIG_PPC_FPU | |
| void __giveup_fpu(struct task_struct *tsk) | |
| { | |
| unsigned long msr; | |
| save_fpu(tsk); | |
| msr = tsk->thread.regs->msr; | |
| msr &= ~(MSR_FP|MSR_FE0|MSR_FE1); | |
| #ifdef CONFIG_VSX | |
| if (cpu_has_feature(CPU_FTR_VSX)) | |
| msr &= ~MSR_VSX; | |
| #endif | |
| tsk->thread.regs->msr = msr; | |
| } | |
| void giveup_fpu(struct task_struct *tsk) | |
| { | |
| check_if_tm_restore_required(tsk); | |
| msr_check_and_set(MSR_FP); | |
| __giveup_fpu(tsk); | |
| msr_check_and_clear(MSR_FP); | |
| } | |
| EXPORT_SYMBOL(giveup_fpu); | |
| /* | |
| * Make sure the floating-point register state in the | |
| * the thread_struct is up to date for task tsk. | |
| */ | |
| void flush_fp_to_thread(struct task_struct *tsk) | |
| { | |
| if (tsk->thread.regs) { | |
| /* | |
| * We need to disable preemption here because if we didn't, | |
| * another process could get scheduled after the regs->msr | |
| * test but before we have finished saving the FP registers | |
| * to the thread_struct. That process could take over the | |
| * FPU, and then when we get scheduled again we would store | |
| * bogus values for the remaining FP registers. | |
| */ | |
| preempt_disable(); | |
| if (tsk->thread.regs->msr & MSR_FP) { | |
| /* | |
| * This should only ever be called for current or | |
| * for a stopped child process. Since we save away | |
| * the FP register state on context switch, | |
| * there is something wrong if a stopped child appears | |
| * to still have its FP state in the CPU registers. | |
| */ | |
| BUG_ON(tsk != current); | |
| giveup_fpu(tsk); | |
| } | |
| preempt_enable(); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(flush_fp_to_thread); | |
| void enable_kernel_fp(void) | |
| { | |
| unsigned long cpumsr; | |
| WARN_ON(preemptible()); | |
| cpumsr = msr_check_and_set(MSR_FP); | |
| if (current->thread.regs && (current->thread.regs->msr & MSR_FP)) { | |
| check_if_tm_restore_required(current); | |
| /* | |
| * If a thread has already been reclaimed then the | |
| * checkpointed registers are on the CPU but have definitely | |
| * been saved by the reclaim code. Don't need to and *cannot* | |
| * giveup as this would save to the 'live' structure not the | |
| * checkpointed structure. | |
| */ | |
| if(!msr_tm_active(cpumsr) && msr_tm_active(current->thread.regs->msr)) | |
| return; | |
| __giveup_fpu(current); | |
| } | |
| } | |
| EXPORT_SYMBOL(enable_kernel_fp); | |
| static int restore_fp(struct task_struct *tsk) | |
| { | |
| if (tsk->thread.load_fp || msr_tm_active(tsk->thread.regs->msr)) { | |
| load_fp_state(¤t->thread.fp_state); | |
| current->thread.load_fp++; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| #else | |
| static int restore_fp(struct task_struct *tsk) { return 0; } | |
| #endif /* CONFIG_PPC_FPU */ | |
| #ifdef CONFIG_ALTIVEC | |
| #define loadvec(thr) ((thr).load_vec) | |
| static void __giveup_altivec(struct task_struct *tsk) | |
| { | |
| unsigned long msr; | |
| save_altivec(tsk); | |
| msr = tsk->thread.regs->msr; | |
| msr &= ~MSR_VEC; | |
| #ifdef CONFIG_VSX | |
| if (cpu_has_feature(CPU_FTR_VSX)) | |
| msr &= ~MSR_VSX; | |
| #endif | |
| tsk->thread.regs->msr = msr; | |
| } | |
| void giveup_altivec(struct task_struct *tsk) | |
| { | |
| check_if_tm_restore_required(tsk); | |
| msr_check_and_set(MSR_VEC); | |
| __giveup_altivec(tsk); | |
| msr_check_and_clear(MSR_VEC); | |
| } | |
| EXPORT_SYMBOL(giveup_altivec); | |
| void enable_kernel_altivec(void) | |
| { | |
| unsigned long cpumsr; | |
| WARN_ON(preemptible()); | |
| cpumsr = msr_check_and_set(MSR_VEC); | |
| if (current->thread.regs && (current->thread.regs->msr & MSR_VEC)) { | |
| check_if_tm_restore_required(current); | |
| /* | |
| * If a thread has already been reclaimed then the | |
| * checkpointed registers are on the CPU but have definitely | |
| * been saved by the reclaim code. Don't need to and *cannot* | |
| * giveup as this would save to the 'live' structure not the | |
| * checkpointed structure. | |
| */ | |
| if(!msr_tm_active(cpumsr) && msr_tm_active(current->thread.regs->msr)) | |
| return; | |
| __giveup_altivec(current); | |
| } | |
| } | |
| EXPORT_SYMBOL(enable_kernel_altivec); | |
| /* | |
| * Make sure the VMX/Altivec register state in the | |
| * the thread_struct is up to date for task tsk. | |
| */ | |
| void flush_altivec_to_thread(struct task_struct *tsk) | |
| { | |
| if (tsk->thread.regs) { | |
| preempt_disable(); | |
| if (tsk->thread.regs->msr & MSR_VEC) { | |
| BUG_ON(tsk != current); | |
| giveup_altivec(tsk); | |
| } | |
| preempt_enable(); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(flush_altivec_to_thread); | |
| static int restore_altivec(struct task_struct *tsk) | |
| { | |
| if (cpu_has_feature(CPU_FTR_ALTIVEC) && | |
| (tsk->thread.load_vec || msr_tm_active(tsk->thread.regs->msr))) { | |
| load_vr_state(&tsk->thread.vr_state); | |
| tsk->thread.used_vr = 1; | |
| tsk->thread.load_vec++; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| #else | |
| #define loadvec(thr) 0 | |
| static inline int restore_altivec(struct task_struct *tsk) { return 0; } | |
| #endif /* CONFIG_ALTIVEC */ | |
| #ifdef CONFIG_VSX | |
| static void __giveup_vsx(struct task_struct *tsk) | |
| { | |
| unsigned long msr = tsk->thread.regs->msr; | |
| /* | |
| * We should never be ssetting MSR_VSX without also setting | |
| * MSR_FP and MSR_VEC | |
| */ | |
| WARN_ON((msr & MSR_VSX) && !((msr & MSR_FP) && (msr & MSR_VEC))); | |
| /* __giveup_fpu will clear MSR_VSX */ | |
| if (msr & MSR_FP) | |
| __giveup_fpu(tsk); | |
| if (msr & MSR_VEC) | |
| __giveup_altivec(tsk); | |
| } | |
| static void giveup_vsx(struct task_struct *tsk) | |
| { | |
| check_if_tm_restore_required(tsk); | |
| msr_check_and_set(MSR_FP|MSR_VEC|MSR_VSX); | |
| __giveup_vsx(tsk); | |
| msr_check_and_clear(MSR_FP|MSR_VEC|MSR_VSX); | |
| } | |
| void enable_kernel_vsx(void) | |
| { | |
| unsigned long cpumsr; | |
| WARN_ON(preemptible()); | |
| cpumsr = msr_check_and_set(MSR_FP|MSR_VEC|MSR_VSX); | |
| if (current->thread.regs && | |
| (current->thread.regs->msr & (MSR_VSX|MSR_VEC|MSR_FP))) { | |
| check_if_tm_restore_required(current); | |
| /* | |
| * If a thread has already been reclaimed then the | |
| * checkpointed registers are on the CPU but have definitely | |
| * been saved by the reclaim code. Don't need to and *cannot* | |
| * giveup as this would save to the 'live' structure not the | |
| * checkpointed structure. | |
| */ | |
| if(!msr_tm_active(cpumsr) && msr_tm_active(current->thread.regs->msr)) | |
| return; | |
| __giveup_vsx(current); | |
| } | |
| } | |
| EXPORT_SYMBOL(enable_kernel_vsx); | |
| void flush_vsx_to_thread(struct task_struct *tsk) | |
| { | |
| if (tsk->thread.regs) { | |
| preempt_disable(); | |
| if (tsk->thread.regs->msr & (MSR_VSX|MSR_VEC|MSR_FP)) { | |
| BUG_ON(tsk != current); | |
| giveup_vsx(tsk); | |
| } | |
| preempt_enable(); | |
| } | |
| } | |
| EXPORT_SYMBOL_GPL(flush_vsx_to_thread); | |
| static int restore_vsx(struct task_struct *tsk) | |
| { | |
| if (cpu_has_feature(CPU_FTR_VSX)) { | |
| tsk->thread.used_vsr = 1; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| #else | |
| static inline int restore_vsx(struct task_struct *tsk) { return 0; } | |
| #endif /* CONFIG_VSX */ | |
| #ifdef CONFIG_SPE | |
| void giveup_spe(struct task_struct *tsk) | |
| { | |
| check_if_tm_restore_required(tsk); | |
| msr_check_and_set(MSR_SPE); | |
| __giveup_spe(tsk); | |
| msr_check_and_clear(MSR_SPE); | |
| } | |
| EXPORT_SYMBOL(giveup_spe); | |
| void enable_kernel_spe(void) | |
| { | |
| WARN_ON(preemptible()); | |
| msr_check_and_set(MSR_SPE); | |
| if (current->thread.regs && (current->thread.regs->msr & MSR_SPE)) { | |
| check_if_tm_restore_required(current); | |
| __giveup_spe(current); | |
| } | |
| } | |
| EXPORT_SYMBOL(enable_kernel_spe); | |
| void flush_spe_to_thread(struct task_struct *tsk) | |
| { | |
| if (tsk->thread.regs) { | |
| preempt_disable(); | |
| if (tsk->thread.regs->msr & MSR_SPE) { | |
| BUG_ON(tsk != current); | |
| tsk->thread.spefscr = mfspr(SPRN_SPEFSCR); | |
| giveup_spe(tsk); | |
| } | |
| preempt_enable(); | |
| } | |
| } | |
| #endif /* CONFIG_SPE */ | |
| static unsigned long msr_all_available; | |
| static int __init init_msr_all_available(void) | |
| { | |
| #ifdef CONFIG_PPC_FPU | |
| msr_all_available |= MSR_FP; | |
| #endif | |
| #ifdef CONFIG_ALTIVEC | |
| if (cpu_has_feature(CPU_FTR_ALTIVEC)) | |
| msr_all_available |= MSR_VEC; | |
| #endif | |
| #ifdef CONFIG_VSX | |
| if (cpu_has_feature(CPU_FTR_VSX)) | |
| msr_all_available |= MSR_VSX; | |
| #endif | |
| #ifdef CONFIG_SPE | |
| if (cpu_has_feature(CPU_FTR_SPE)) | |
| msr_all_available |= MSR_SPE; | |
| #endif | |
| return 0; | |
| } | |
| early_initcall(init_msr_all_available); | |
| void giveup_all(struct task_struct *tsk) | |
| { | |
| unsigned long usermsr; | |
| if (!tsk->thread.regs) | |
| return; | |
| usermsr = tsk->thread.regs->msr; | |
| if ((usermsr & msr_all_available) == 0) | |
| return; | |
| msr_check_and_set(msr_all_available); | |
| check_if_tm_restore_required(tsk); | |
| WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); | |
| #ifdef CONFIG_PPC_FPU | |
| if (usermsr & MSR_FP) | |
| __giveup_fpu(tsk); | |
| #endif | |
| #ifdef CONFIG_ALTIVEC | |
| if (usermsr & MSR_VEC) | |
| __giveup_altivec(tsk); | |
| #endif | |
| #ifdef CONFIG_SPE | |
| if (usermsr & MSR_SPE) | |
| __giveup_spe(tsk); | |
| #endif | |
| msr_check_and_clear(msr_all_available); | |
| } | |
| EXPORT_SYMBOL(giveup_all); | |
| void restore_math(struct pt_regs *regs) | |
| { | |
| unsigned long msr; | |
| if (!msr_tm_active(regs->msr) && | |
| !current->thread.load_fp && !loadvec(current->thread)) | |
| return; | |
| msr = regs->msr; | |
| msr_check_and_set(msr_all_available); | |
| /* | |
| * Only reload if the bit is not set in the user MSR, the bit BEING set | |
| * indicates that the registers are hot | |
| */ | |
| if ((!(msr & MSR_FP)) && restore_fp(current)) | |
| msr |= MSR_FP | current->thread.fpexc_mode; | |
| if ((!(msr & MSR_VEC)) && restore_altivec(current)) | |
| msr |= MSR_VEC; | |
| if ((msr & (MSR_FP | MSR_VEC)) == (MSR_FP | MSR_VEC) && | |
| restore_vsx(current)) { | |
| msr |= MSR_VSX; | |
| } | |
| msr_check_and_clear(msr_all_available); | |
| regs->msr = msr; | |
| } | |
| void save_all(struct task_struct *tsk) | |
| { | |
| unsigned long usermsr; | |
| if (!tsk->thread.regs) | |
| return; | |
| usermsr = tsk->thread.regs->msr; | |
| if ((usermsr & msr_all_available) == 0) | |
| return; | |
| msr_check_and_set(msr_all_available); | |
| WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); | |
| if (usermsr & MSR_FP) | |
| save_fpu(tsk); | |
| if (usermsr & MSR_VEC) | |
| save_altivec(tsk); | |
| if (usermsr & MSR_SPE) | |
| __giveup_spe(tsk); | |
| msr_check_and_clear(msr_all_available); | |
| } | |
| void flush_all_to_thread(struct task_struct *tsk) | |
| { | |
| if (tsk->thread.regs) { | |
| preempt_disable(); | |
| BUG_ON(tsk != current); | |
| save_all(tsk); | |
| #ifdef CONFIG_SPE | |
| if (tsk->thread.regs->msr & MSR_SPE) | |
| tsk->thread.spefscr = mfspr(SPRN_SPEFSCR); | |
| #endif | |
| preempt_enable(); | |
| } | |
| } | |
| EXPORT_SYMBOL(flush_all_to_thread); | |
| #ifdef CONFIG_PPC_ADV_DEBUG_REGS | |
| void do_send_trap(struct pt_regs *regs, unsigned long address, | |
| unsigned long error_code, int signal_code, int breakpt) | |
| { | |
| siginfo_t info; | |
| current->thread.trap_nr = signal_code; | |
| if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, | |
| 11, SIGSEGV) == NOTIFY_STOP) | |
| return; | |
| /* Deliver the signal to userspace */ | |
| info.si_signo = SIGTRAP; | |
| info.si_errno = breakpt; /* breakpoint or watchpoint id */ | |
| info.si_code = signal_code; | |
| info.si_addr = (void __user *)address; | |
| force_sig_info(SIGTRAP, &info, current); | |
| } | |
| #else /* !CONFIG_PPC_ADV_DEBUG_REGS */ | |
| void do_break (struct pt_regs *regs, unsigned long address, | |
| unsigned long error_code) | |
| { | |
| siginfo_t info; | |
| current->thread.trap_nr = TRAP_HWBKPT; | |
| if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, | |
| 11, SIGSEGV) == NOTIFY_STOP) | |
| return; | |
| if (debugger_break_match(regs)) | |
| return; | |
| /* Clear the breakpoint */ | |
| hw_breakpoint_disable(); | |
| /* Deliver the signal to userspace */ | |
| info.si_signo = SIGTRAP; | |
| info.si_errno = 0; | |
| info.si_code = TRAP_HWBKPT; | |
| info.si_addr = (void __user *)address; | |
| force_sig_info(SIGTRAP, &info, current); | |
| } | |
| #endif /* CONFIG_PPC_ADV_DEBUG_REGS */ | |
| static DEFINE_PER_CPU(struct arch_hw_breakpoint, current_brk); | |
| #ifdef CONFIG_PPC_ADV_DEBUG_REGS | |
| /* | |
| * Set the debug registers back to their default "safe" values. | |
| */ | |
| static void set_debug_reg_defaults(struct thread_struct *thread) | |
| { | |
| thread->debug.iac1 = thread->debug.iac2 = 0; | |
| #if CONFIG_PPC_ADV_DEBUG_IACS > 2 | |
| thread->debug.iac3 = thread->debug.iac4 = 0; | |
| #endif | |
| thread->debug.dac1 = thread->debug.dac2 = 0; | |
| #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 | |
| thread->debug.dvc1 = thread->debug.dvc2 = 0; | |
| #endif | |
| thread->debug.dbcr0 = 0; | |
| #ifdef CONFIG_BOOKE | |
| /* | |
| * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) | |
| */ | |
| thread->debug.dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | | |
| DBCR1_IAC3US | DBCR1_IAC4US; | |
| /* | |
| * Force Data Address Compare User/Supervisor bits to be User-only | |
| * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0. | |
| */ | |
| thread->debug.dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; | |
| #else | |
| thread->debug.dbcr1 = 0; | |
| #endif | |
| } | |
| static void prime_debug_regs(struct debug_reg *debug) | |
| { | |
| /* | |
| * We could have inherited MSR_DE from userspace, since | |
| * it doesn't get cleared on exception entry. Make sure | |
| * MSR_DE is clear before we enable any debug events. | |
| */ | |
| mtmsr(mfmsr() & ~MSR_DE); | |
| mtspr(SPRN_IAC1, debug->iac1); | |
| mtspr(SPRN_IAC2, debug->iac2); | |
| #if CONFIG_PPC_ADV_DEBUG_IACS > 2 | |
| mtspr(SPRN_IAC3, debug->iac3); | |
| mtspr(SPRN_IAC4, debug->iac4); | |
| #endif | |
| mtspr(SPRN_DAC1, debug->dac1); | |
| mtspr(SPRN_DAC2, debug->dac2); | |
| #if CONFIG_PPC_ADV_DEBUG_DVCS > 0 | |
| mtspr(SPRN_DVC1, debug->dvc1); | |
| mtspr(SPRN_DVC2, debug->dvc2); | |
| #endif | |
| mtspr(SPRN_DBCR0, debug->dbcr0); | |
| mtspr(SPRN_DBCR1, debug->dbcr1); | |
| #ifdef CONFIG_BOOKE | |
| mtspr(SPRN_DBCR2, debug->dbcr2); | |
| #endif | |
| } | |
| /* | |
| * Unless neither the old or new thread are making use of the | |
| * debug registers, set the debug registers from the values | |
| * stored in the new thread. | |
| */ | |
| void switch_booke_debug_regs(struct debug_reg *new_debug) | |
| { | |
| if ((current->thread.debug.dbcr0 & DBCR0_IDM) | |
| || (new_debug->dbcr0 & DBCR0_IDM)) | |
| prime_debug_regs(new_debug); | |
| } | |
| EXPORT_SYMBOL_GPL(switch_booke_debug_regs); | |
| #else /* !CONFIG_PPC_ADV_DEBUG_REGS */ | |
| #ifndef CONFIG_HAVE_HW_BREAKPOINT | |
| static void set_debug_reg_defaults(struct thread_struct *thread) | |
| { | |
| thread->hw_brk.address = 0; | |
| thread->hw_brk.type = 0; | |
| set_breakpoint(&thread->hw_brk); | |
| } | |
| #endif /* !CONFIG_HAVE_HW_BREAKPOINT */ | |
| #endif /* CONFIG_PPC_ADV_DEBUG_REGS */ | |
| #ifdef CONFIG_PPC_ADV_DEBUG_REGS | |
| static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) | |
| { | |
| mtspr(SPRN_DAC1, dabr); | |
| #ifdef CONFIG_PPC_47x | |
| isync(); | |
| #endif | |
| return 0; | |
| } | |
| #elif defined(CONFIG_PPC_BOOK3S) | |
| static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) | |
| { | |
| mtspr(SPRN_DABR, dabr); | |
| if (cpu_has_feature(CPU_FTR_DABRX)) | |
| mtspr(SPRN_DABRX, dabrx); | |
| return 0; | |
| } | |
| #elif defined(CONFIG_PPC_8xx) | |
| static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) | |
| { | |
| unsigned long addr = dabr & ~HW_BRK_TYPE_DABR; | |
| unsigned long lctrl1 = 0x90000000; /* compare type: equal on E & F */ | |
| unsigned long lctrl2 = 0x8e000002; /* watchpoint 1 on cmp E | F */ | |
| if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_READ) | |
| lctrl1 |= 0xa0000; | |
| else if ((dabr & HW_BRK_TYPE_RDWR) == HW_BRK_TYPE_WRITE) | |
| lctrl1 |= 0xf0000; | |
| else if ((dabr & HW_BRK_TYPE_RDWR) == 0) | |
| lctrl2 = 0; | |
| mtspr(SPRN_LCTRL2, 0); | |
| mtspr(SPRN_CMPE, addr); | |
| mtspr(SPRN_CMPF, addr + 4); | |
| mtspr(SPRN_LCTRL1, lctrl1); | |
| mtspr(SPRN_LCTRL2, lctrl2); | |
| return 0; | |
| } | |
| #else | |
| static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) | |
| { | |
| return -EINVAL; | |
| } | |
| #endif | |
| static inline int set_dabr(struct arch_hw_breakpoint *brk) | |
| { | |
| unsigned long dabr, dabrx; | |
| dabr = brk->address | (brk->type & HW_BRK_TYPE_DABR); | |
| dabrx = ((brk->type >> 3) & 0x7); | |
| if (ppc_md.set_dabr) | |
| return ppc_md.set_dabr(dabr, dabrx); | |
| return __set_dabr(dabr, dabrx); | |
| } | |
| static inline int set_dawr(struct arch_hw_breakpoint *brk) | |
| { | |
| unsigned long dawr, dawrx, mrd; | |
| dawr = brk->address; | |
| dawrx = (brk->type & (HW_BRK_TYPE_READ | HW_BRK_TYPE_WRITE)) \ | |
| << (63 - 58); //* read/write bits */ | |
| dawrx |= ((brk->type & (HW_BRK_TYPE_TRANSLATE)) >> 2) \ | |
| << (63 - 59); //* translate */ | |
| dawrx |= (brk->type & (HW_BRK_TYPE_PRIV_ALL)) \ | |
| >> 3; //* PRIM bits */ | |
| /* dawr length is stored in field MDR bits 48:53. Matches range in | |
| doublewords (64 bits) baised by -1 eg. 0b000000=1DW and | |
| 0b111111=64DW. | |
| brk->len is in bytes. | |
| This aligns up to double word size, shifts and does the bias. | |
| */ | |
| mrd = ((brk->len + 7) >> 3) - 1; | |
| dawrx |= (mrd & 0x3f) << (63 - 53); | |
| if (ppc_md.set_dawr) | |
| return ppc_md.set_dawr(dawr, dawrx); | |
| mtspr(SPRN_DAWR, dawr); | |
| mtspr(SPRN_DAWRX, dawrx); | |
| return 0; | |
| } | |
| void __set_breakpoint(struct arch_hw_breakpoint *brk) | |
| { | |
| memcpy(this_cpu_ptr(¤t_brk), brk, sizeof(*brk)); | |
| if (cpu_has_feature(CPU_FTR_DAWR)) | |
| set_dawr(brk); | |
| else | |
| set_dabr(brk); | |
| } | |
| void set_breakpoint(struct arch_hw_breakpoint *brk) | |
| { | |
| preempt_disable(); | |
| __set_breakpoint(brk); | |
| preempt_enable(); | |
| } | |
| #ifdef CONFIG_PPC64 | |
| DEFINE_PER_CPU(struct cpu_usage, cpu_usage_array); | |
| #endif | |
| static inline bool hw_brk_match(struct arch_hw_breakpoint *a, | |
| struct arch_hw_breakpoint *b) | |
| { | |
| if (a->address != b->address) | |
| return false; | |
| if (a->type != b->type) | |
| return false; | |
| if (a->len != b->len) | |
| return false; | |
| return true; | |
| } | |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | |
| static inline bool tm_enabled(struct task_struct *tsk) | |
| { | |
| return tsk && tsk->thread.regs && (tsk->thread.regs->msr & MSR_TM); | |
| } | |
| static void tm_reclaim_thread(struct thread_struct *thr, | |
| struct thread_info *ti, uint8_t cause) | |
| { | |
| /* | |
| * Use the current MSR TM suspended bit to track if we have | |
| * checkpointed state outstanding. | |
| * On signal delivery, we'd normally reclaim the checkpointed | |
| * state to obtain stack pointer (see:get_tm_stackpointer()). | |
| * This will then directly return to userspace without going | |
| * through __switch_to(). However, if the stack frame is bad, | |
| * we need to exit this thread which calls __switch_to() which | |
| * will again attempt to reclaim the already saved tm state. | |
| * Hence we need to check that we've not already reclaimed | |
| * this state. | |
| * We do this using the current MSR, rather tracking it in | |
| * some specific thread_struct bit, as it has the additional | |
| * benefit of checking for a potential TM bad thing exception. | |
| */ | |
| if (!MSR_TM_SUSPENDED(mfmsr())) | |
| return; | |
| /* | |
| * If we are in a transaction and FP is off then we can't have | |
| * used FP inside that transaction. Hence the checkpointed | |
| * state is the same as the live state. We need to copy the | |
| * live state to the checkpointed state so that when the | |
| * transaction is restored, the checkpointed state is correct | |
| * and the aborted transaction sees the correct state. We use | |
| * ckpt_regs.msr here as that's what tm_reclaim will use to | |
| * determine if it's going to write the checkpointed state or | |
| * not. So either this will write the checkpointed registers, | |
| * or reclaim will. Similarly for VMX. | |
| */ | |
| if ((thr->ckpt_regs.msr & MSR_FP) == 0) | |
| memcpy(&thr->ckfp_state, &thr->fp_state, | |
| sizeof(struct thread_fp_state)); | |
| if ((thr->ckpt_regs.msr & MSR_VEC) == 0) | |
| memcpy(&thr->ckvr_state, &thr->vr_state, | |
| sizeof(struct thread_vr_state)); | |
| giveup_all(container_of(thr, struct task_struct, thread)); | |
| tm_reclaim(thr, thr->ckpt_regs.msr, cause); | |
| } | |
| void tm_reclaim_current(uint8_t cause) | |
| { | |
| tm_enable(); | |
| tm_reclaim_thread(¤t->thread, current_thread_info(), cause); | |
| } | |
| static inline void tm_reclaim_task(struct task_struct *tsk) | |
| { | |
| /* We have to work out if we're switching from/to a task that's in the | |
| * middle of a transaction. | |
| * | |
| * In switching we need to maintain a 2nd register state as | |
| * oldtask->thread.ckpt_regs. We tm_reclaim(oldproc); this saves the | |
| * checkpointed (tbegin) state in ckpt_regs, ckfp_state and | |
| * ckvr_state | |
| * | |
| * We also context switch (save) TFHAR/TEXASR/TFIAR in here. | |
| */ | |
| struct thread_struct *thr = &tsk->thread; | |
| if (!thr->regs) | |
| return; | |
| if (!MSR_TM_ACTIVE(thr->regs->msr)) | |
| goto out_and_saveregs; | |
| TM_DEBUG("--- tm_reclaim on pid %d (NIP=%lx, " | |
| "ccr=%lx, msr=%lx, trap=%lx)\n", | |
| tsk->pid, thr->regs->nip, | |
| thr->regs->ccr, thr->regs->msr, | |
| thr->regs->trap); | |
| tm_reclaim_thread(thr, task_thread_info(tsk), TM_CAUSE_RESCHED); | |
| TM_DEBUG("--- tm_reclaim on pid %d complete\n", | |
| tsk->pid); | |
| out_and_saveregs: | |
| /* Always save the regs here, even if a transaction's not active. | |
| * This context-switches a thread's TM info SPRs. We do it here to | |
| * be consistent with the restore path (in recheckpoint) which | |
| * cannot happen later in _switch(). | |
| */ | |
| tm_save_sprs(thr); | |
| } | |
| extern void __tm_recheckpoint(struct thread_struct *thread, | |
| unsigned long orig_msr); | |
| void tm_recheckpoint(struct thread_struct *thread, | |
| unsigned long orig_msr) | |
| { | |
| unsigned long flags; | |
| if (!(thread->regs->msr & MSR_TM)) | |
| return; | |
| /* We really can't be interrupted here as the TEXASR registers can't | |
| * change and later in the trecheckpoint code, we have a userspace R1. | |
| * So let's hard disable over this region. | |
| */ | |
| local_irq_save(flags); | |
| hard_irq_disable(); | |
| /* The TM SPRs are restored here, so that TEXASR.FS can be set | |
| * before the trecheckpoint and no explosion occurs. | |
| */ | |
| tm_restore_sprs(thread); | |
| __tm_recheckpoint(thread, orig_msr); | |
| local_irq_restore(flags); | |
| } | |
| static inline void tm_recheckpoint_new_task(struct task_struct *new) | |
| { | |
| unsigned long msr; | |
| if (!cpu_has_feature(CPU_FTR_TM)) | |
| return; | |
| /* Recheckpoint the registers of the thread we're about to switch to. | |
| * | |
| * If the task was using FP, we non-lazily reload both the original and | |
| * the speculative FP register states. This is because the kernel | |
| * doesn't see if/when a TM rollback occurs, so if we take an FP | |
| * unavailable later, we are unable to determine which set of FP regs | |
| * need to be restored. | |
| */ | |
| if (!tm_enabled(new)) | |
| return; | |
| if (!MSR_TM_ACTIVE(new->thread.regs->msr)){ | |
| tm_restore_sprs(&new->thread); | |
| return; | |
| } | |
| msr = new->thread.ckpt_regs.msr; | |
| /* Recheckpoint to restore original checkpointed register state. */ | |
| TM_DEBUG("*** tm_recheckpoint of pid %d " | |
| "(new->msr 0x%lx, new->origmsr 0x%lx)\n", | |
| new->pid, new->thread.regs->msr, msr); | |
| tm_recheckpoint(&new->thread, msr); | |
| /* | |
| * The checkpointed state has been restored but the live state has | |
| * not, ensure all the math functionality is turned off to trigger | |
| * restore_math() to reload. | |
| */ | |
| new->thread.regs->msr &= ~(MSR_FP | MSR_VEC | MSR_VSX); | |
| TM_DEBUG("*** tm_recheckpoint of pid %d complete " | |
| "(kernel msr 0x%lx)\n", | |
| new->pid, mfmsr()); | |
| } | |
| static inline void __switch_to_tm(struct task_struct *prev, | |
| struct task_struct *new) | |
| { | |
| if (cpu_has_feature(CPU_FTR_TM)) { | |
| if (tm_enabled(prev) || tm_enabled(new)) | |
| tm_enable(); | |
| if (tm_enabled(prev)) { | |
| prev->thread.load_tm++; | |
| tm_reclaim_task(prev); | |
| if (!MSR_TM_ACTIVE(prev->thread.regs->msr) && prev->thread.load_tm == 0) | |
| prev->thread.regs->msr &= ~MSR_TM; | |
| } | |
| tm_recheckpoint_new_task(new); | |
| } | |
| } | |
| /* | |
| * This is called if we are on the way out to userspace and the | |
| * TIF_RESTORE_TM flag is set. It checks if we need to reload | |
| * FP and/or vector state and does so if necessary. | |
| * If userspace is inside a transaction (whether active or | |
| * suspended) and FP/VMX/VSX instructions have ever been enabled | |
| * inside that transaction, then we have to keep them enabled | |
| * and keep the FP/VMX/VSX state loaded while ever the transaction | |
| * continues. The reason is that if we didn't, and subsequently | |
| * got a FP/VMX/VSX unavailable interrupt inside a transaction, | |
| * we don't know whether it's the same transaction, and thus we | |
| * don't know which of the checkpointed state and the transactional | |
| * state to use. | |
| */ | |
| void restore_tm_state(struct pt_regs *regs) | |
| { | |
| unsigned long msr_diff; | |
| /* | |
| * This is the only moment we should clear TIF_RESTORE_TM as | |
| * it is here that ckpt_regs.msr and pt_regs.msr become the same | |
| * again, anything else could lead to an incorrect ckpt_msr being | |
| * saved and therefore incorrect signal contexts. | |
| */ | |
| clear_thread_flag(TIF_RESTORE_TM); | |
| if (!MSR_TM_ACTIVE(regs->msr)) | |
| return; | |
| msr_diff = current->thread.ckpt_regs.msr & ~regs->msr; | |
| msr_diff &= MSR_FP | MSR_VEC | MSR_VSX; | |
| /* Ensure that restore_math() will restore */ | |
| if (msr_diff & MSR_FP) | |
| current->thread.load_fp = 1; | |
| #ifdef CONFIG_ALTIVEC | |
| if (cpu_has_feature(CPU_FTR_ALTIVEC) && msr_diff & MSR_VEC) | |
| current->thread.load_vec = 1; | |
| #endif | |
| restore_math(regs); | |
| regs->msr |= msr_diff; | |
| } | |
| #else | |
| #define tm_recheckpoint_new_task(new) | |
| #define __switch_to_tm(prev, new) | |
| #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ | |
| static inline void save_sprs(struct thread_struct *t) | |
| { | |
| #ifdef CONFIG_ALTIVEC | |
| if (cpu_has_feature(CPU_FTR_ALTIVEC)) | |
| t->vrsave = mfspr(SPRN_VRSAVE); | |
| #endif | |
| #ifdef CONFIG_PPC_BOOK3S_64 | |
| if (cpu_has_feature(CPU_FTR_DSCR)) | |
| t->dscr = mfspr(SPRN_DSCR); | |
| if (cpu_has_feature(CPU_FTR_ARCH_207S)) { | |
| t->bescr = mfspr(SPRN_BESCR); | |
| t->ebbhr = mfspr(SPRN_EBBHR); | |
| t->ebbrr = mfspr(SPRN_EBBRR); | |
| t->fscr = mfspr(SPRN_FSCR); | |
| /* | |
| * Note that the TAR is not available for use in the kernel. | |
| * (To provide this, the TAR should be backed up/restored on | |
| * exception entry/exit instead, and be in pt_regs. FIXME, | |
| * this should be in pt_regs anyway (for debug).) | |
| */ | |
| t->tar = mfspr(SPRN_TAR); | |
| } | |
| #endif | |
| } | |
| static inline void restore_sprs(struct thread_struct *old_thread, | |
| struct thread_struct *new_thread) | |
| { | |
| #ifdef CONFIG_ALTIVEC | |
| if (cpu_has_feature(CPU_FTR_ALTIVEC) && | |
| old_thread->vrsave != new_thread->vrsave) | |
| mtspr(SPRN_VRSAVE, new_thread->vrsave); | |
| #endif | |
| #ifdef CONFIG_PPC_BOOK3S_64 | |
| if (cpu_has_feature(CPU_FTR_DSCR)) { | |
| u64 dscr = get_paca()->dscr_default; | |
| if (new_thread->dscr_inherit) | |
| dscr = new_thread->dscr; | |
| if (old_thread->dscr != dscr) | |
| mtspr(SPRN_DSCR, dscr); | |
| } | |
| if (cpu_has_feature(CPU_FTR_ARCH_207S)) { | |
| if (old_thread->bescr != new_thread->bescr) | |
| mtspr(SPRN_BESCR, new_thread->bescr); | |
| if (old_thread->ebbhr != new_thread->ebbhr) | |
| mtspr(SPRN_EBBHR, new_thread->ebbhr); | |
| if (old_thread->ebbrr != new_thread->ebbrr) | |
| mtspr(SPRN_EBBRR, new_thread->ebbrr); | |
| if (old_thread->fscr != new_thread->fscr) | |
| mtspr(SPRN_FSCR, new_thread->fscr); | |
| if (old_thread->tar != new_thread->tar) | |
| mtspr(SPRN_TAR, new_thread->tar); | |
| } | |
| #endif | |
| } | |
| #ifdef CONFIG_PPC_BOOK3S_64 | |
| #define CP_SIZE 128 | |
| static const u8 dummy_copy_buffer[CP_SIZE] __attribute__((aligned(CP_SIZE))); | |
| #endif | |
| struct task_struct *__switch_to(struct task_struct *prev, | |
| struct task_struct *new) | |
| { | |
| struct thread_struct *new_thread, *old_thread; | |
| struct task_struct *last; | |
| #ifdef CONFIG_PPC_BOOK3S_64 | |
| struct ppc64_tlb_batch *batch; | |
| #endif | |
| new_thread = &new->thread; | |
| old_thread = ¤t->thread; | |
| WARN_ON(!irqs_disabled()); | |
| #ifdef CONFIG_PPC64 | |
| /* | |
| * Collect processor utilization data per process | |
| */ | |
| if (firmware_has_feature(FW_FEATURE_SPLPAR)) { | |
| struct cpu_usage *cu = this_cpu_ptr(&cpu_usage_array); | |
| long unsigned start_tb, current_tb; | |
| start_tb = old_thread->start_tb; | |
| cu->current_tb = current_tb = mfspr(SPRN_PURR); | |
| old_thread->accum_tb += (current_tb - start_tb); | |
| new_thread->start_tb = current_tb; | |
| } | |
| #endif /* CONFIG_PPC64 */ | |
| #ifdef CONFIG_PPC_STD_MMU_64 | |
| batch = this_cpu_ptr(&ppc64_tlb_batch); | |
| if (batch->active) { | |
| current_thread_info()->local_flags |= _TLF_LAZY_MMU; | |
| if (batch->index) | |
| __flush_tlb_pending(batch); | |
| batch->active = 0; | |
| } | |
| #endif /* CONFIG_PPC_STD_MMU_64 */ | |
| #ifdef CONFIG_PPC_ADV_DEBUG_REGS | |
| switch_booke_debug_regs(&new->thread.debug); | |
| #else | |
| /* | |
| * For PPC_BOOK3S_64, we use the hw-breakpoint interfaces that would | |
| * schedule DABR | |
| */ | |
| #ifndef CONFIG_HAVE_HW_BREAKPOINT | |
| if (unlikely(!hw_brk_match(this_cpu_ptr(¤t_brk), &new->thread.hw_brk))) | |
| __set_breakpoint(&new->thread.hw_brk); | |
| #endif /* CONFIG_HAVE_HW_BREAKPOINT */ | |
| #endif | |
| /* | |
| * We need to save SPRs before treclaim/trecheckpoint as these will | |
| * change a number of them. | |
| */ | |
| save_sprs(&prev->thread); | |
| /* Save FPU, Altivec, VSX and SPE state */ | |
| giveup_all(prev); | |
| __switch_to_tm(prev, new); | |
| if (!radix_enabled()) { | |
| /* | |
| * We can't take a PMU exception inside _switch() since there | |
| * is a window where the kernel stack SLB and the kernel stack | |
| * are out of sync. Hard disable here. | |
| */ | |
| hard_irq_disable(); | |
| } | |
| /* | |
| * Call restore_sprs() before calling _switch(). If we move it after | |
| * _switch() then we miss out on calling it for new tasks. The reason | |
| * for this is we manually create a stack frame for new tasks that | |
| * directly returns through ret_from_fork() or | |
| * ret_from_kernel_thread(). See copy_thread() for details. | |
| */ | |
| restore_sprs(old_thread, new_thread); | |
| last = _switch(old_thread, new_thread); | |
| #ifdef CONFIG_PPC_STD_MMU_64 | |
| if (current_thread_info()->local_flags & _TLF_LAZY_MMU) { | |
| current_thread_info()->local_flags &= ~_TLF_LAZY_MMU; | |
| batch = this_cpu_ptr(&ppc64_tlb_batch); | |
| batch->active = 1; | |
| } | |
| if (current_thread_info()->task->thread.regs) { | |
| restore_math(current_thread_info()->task->thread.regs); | |
| /* | |
| * The copy-paste buffer can only store into foreign real | |
| * addresses, so unprivileged processes can not see the | |
| * data or use it in any way unless they have foreign real | |
| * mappings. We don't have a VAS driver that allocates those | |
| * yet, so no cpabort is required. | |
| */ | |
| if (cpu_has_feature(CPU_FTR_POWER9_DD1)) { | |
| /* | |
| * DD1 allows paste into normal system memory, so we | |
| * do an unpaired copy here to clear the buffer and | |
| * prevent a covert channel being set up. | |
| * | |
| * cpabort is not used because it is quite expensive. | |
| */ | |
| asm volatile(PPC_COPY(%0, %1) | |
| : : "r"(dummy_copy_buffer), "r"(0)); | |
| } | |
| } | |
| #endif /* CONFIG_PPC_STD_MMU_64 */ | |
| return last; | |
| } | |
| static int instructions_to_print = 16; | |
| static void show_instructions(struct pt_regs *regs) | |
| { | |
| int i; | |
| unsigned long pc = regs->nip - (instructions_to_print * 3 / 4 * | |
| sizeof(int)); | |
| printk("Instruction dump:"); | |
| for (i = 0; i < instructions_to_print; i++) { | |
| int instr; | |
| if (!(i % 8)) | |
| pr_cont("\n"); | |
| #if !defined(CONFIG_BOOKE) | |
| /* If executing with the IMMU off, adjust pc rather | |
| * than print XXXXXXXX. | |
| */ | |
| if (!(regs->msr & MSR_IR)) | |
| pc = (unsigned long)phys_to_virt(pc); | |
| #endif | |
| if (!__kernel_text_address(pc) || | |
| probe_kernel_address((unsigned int __user *)pc, instr)) { | |
| pr_cont("XXXXXXXX "); | |
| } else { | |
| if (regs->nip == pc) | |
| pr_cont("<%08x> ", instr); | |
| else | |
| pr_cont("%08x ", instr); | |
| } | |
| pc += sizeof(int); | |
| } | |
| pr_cont("\n"); | |
| } | |
| struct regbit { | |
| unsigned long bit; | |
| const char *name; | |
| }; | |
| static struct regbit msr_bits[] = { | |
| #if defined(CONFIG_PPC64) && !defined(CONFIG_BOOKE) | |
| {MSR_SF, "SF"}, | |
| {MSR_HV, "HV"}, | |
| #endif | |
| {MSR_VEC, "VEC"}, | |
| {MSR_VSX, "VSX"}, | |
| #ifdef CONFIG_BOOKE | |
| {MSR_CE, "CE"}, | |
| #endif | |
| {MSR_EE, "EE"}, | |
| {MSR_PR, "PR"}, | |
| {MSR_FP, "FP"}, | |
| {MSR_ME, "ME"}, | |
| #ifdef CONFIG_BOOKE | |
| {MSR_DE, "DE"}, | |
| #else | |
| {MSR_SE, "SE"}, | |
| {MSR_BE, "BE"}, | |
| #endif | |
| {MSR_IR, "IR"}, | |
| {MSR_DR, "DR"}, | |
| {MSR_PMM, "PMM"}, | |
| #ifndef CONFIG_BOOKE | |
| {MSR_RI, "RI"}, | |
| {MSR_LE, "LE"}, | |
| #endif | |
| {0, NULL} | |
| }; | |
| static void print_bits(unsigned long val, struct regbit *bits, const char *sep) | |
| { | |
| const char *s = ""; | |
| for (; bits->bit; ++bits) | |
| if (val & bits->bit) { | |
| pr_cont("%s%s", s, bits->name); | |
| s = sep; | |
| } | |
| } | |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | |
| static struct regbit msr_tm_bits[] = { | |
| {MSR_TS_T, "T"}, | |
| {MSR_TS_S, "S"}, | |
| {MSR_TM, "E"}, | |
| {0, NULL} | |
| }; | |
| static void print_tm_bits(unsigned long val) | |
| { | |
| /* | |
| * This only prints something if at least one of the TM bit is set. | |
| * Inside the TM[], the output means: | |
| * E: Enabled (bit 32) | |
| * S: Suspended (bit 33) | |
| * T: Transactional (bit 34) | |
| */ | |
| if (val & (MSR_TM | MSR_TS_S | MSR_TS_T)) { | |
| pr_cont(",TM["); | |
| print_bits(val, msr_tm_bits, ""); | |
| pr_cont("]"); | |
| } | |
| } | |
| #else | |
| static void print_tm_bits(unsigned long val) {} | |
| #endif | |
| static void print_msr_bits(unsigned long val) | |
| { | |
| pr_cont("<"); | |
| print_bits(val, msr_bits, ","); | |
| print_tm_bits(val); | |
| pr_cont(">"); | |
| } | |
| #ifdef CONFIG_PPC64 | |
| #define REG "%016lx" | |
| #define REGS_PER_LINE 4 | |
| #define LAST_VOLATILE 13 | |
| #else | |
| #define REG "%08lx" | |
| #define REGS_PER_LINE 8 | |
| #define LAST_VOLATILE 12 | |
| #endif | |
| void show_regs(struct pt_regs * regs) | |
| { | |
| int i, trap; | |
| show_regs_print_info(KERN_DEFAULT); | |
| printk("NIP: "REG" LR: "REG" CTR: "REG"\n", | |
| regs->nip, regs->link, regs->ctr); | |
| printk("REGS: %p TRAP: %04lx %s (%s)\n", | |
| regs, regs->trap, print_tainted(), init_utsname()->release); | |
| printk("MSR: "REG" ", regs->msr); | |
| print_msr_bits(regs->msr); | |
| pr_cont(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer); | |
| trap = TRAP(regs); | |
| if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR)) | |
| pr_cont("CFAR: "REG" ", regs->orig_gpr3); | |
| if (trap == 0x200 || trap == 0x300 || trap == 0x600) | |
| #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) | |
| pr_cont("DEAR: "REG" ESR: "REG" ", regs->dar, regs->dsisr); | |
| #else | |
| pr_cont("DAR: "REG" DSISR: %08lx ", regs->dar, regs->dsisr); | |
| #endif | |
| #ifdef CONFIG_PPC64 | |
| pr_cont("SOFTE: %ld ", regs->softe); | |
| #endif | |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | |
| if (MSR_TM_ACTIVE(regs->msr)) | |
| pr_cont("\nPACATMSCRATCH: %016llx ", get_paca()->tm_scratch); | |
| #endif | |
| for (i = 0; i < 32; i++) { | |
| if ((i % REGS_PER_LINE) == 0) | |
| pr_cont("\nGPR%02d: ", i); | |
| pr_cont(REG " ", regs->gpr[i]); | |
| if (i == LAST_VOLATILE && !FULL_REGS(regs)) | |
| break; | |
| } | |
| pr_cont("\n"); | |
| #ifdef CONFIG_KALLSYMS | |
| /* | |
| * Lookup NIP late so we have the best change of getting the | |
| * above info out without failing | |
| */ | |
| printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip); | |
| printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link); | |
| #endif | |
| show_stack(current, (unsigned long *) regs->gpr[1]); | |
| if (!user_mode(regs)) | |
| show_instructions(regs); | |
| } | |
| void flush_thread(void) | |
| { | |
| #ifdef CONFIG_HAVE_HW_BREAKPOINT | |
| flush_ptrace_hw_breakpoint(current); | |
| #else /* CONFIG_HAVE_HW_BREAKPOINT */ | |
| set_debug_reg_defaults(¤t->thread); | |
| #endif /* CONFIG_HAVE_HW_BREAKPOINT */ | |
| } | |
| void | |
| release_thread(struct task_struct *t) | |
| { | |
| } | |
| /* | |
| * this gets called so that we can store coprocessor state into memory and | |
| * copy the current task into the new thread. | |
| */ | |
| int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src) | |
| { | |
| flush_all_to_thread(src); | |
| /* | |
| * Flush TM state out so we can copy it. __switch_to_tm() does this | |
| * flush but it removes the checkpointed state from the current CPU and | |
| * transitions the CPU out of TM mode. Hence we need to call | |
| * tm_recheckpoint_new_task() (on the same task) to restore the | |
| * checkpointed state back and the TM mode. | |
| * | |
| * Can't pass dst because it isn't ready. Doesn't matter, passing | |
| * dst is only important for __switch_to() | |
| */ | |
| __switch_to_tm(src, src); | |
| *dst = *src; | |
| clear_task_ebb(dst); | |
| return 0; | |
| } | |
| static void setup_ksp_vsid(struct task_struct *p, unsigned long sp) | |
| { | |
| #ifdef CONFIG_PPC_STD_MMU_64 | |
| unsigned long sp_vsid; | |
| unsigned long llp = mmu_psize_defs[mmu_linear_psize].sllp; | |
| if (radix_enabled()) | |
| return; | |
| if (mmu_has_feature(MMU_FTR_1T_SEGMENT)) | |
| sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_1T) | |
| << SLB_VSID_SHIFT_1T; | |
| else | |
| sp_vsid = get_kernel_vsid(sp, MMU_SEGSIZE_256M) | |
| << SLB_VSID_SHIFT; | |
| sp_vsid |= SLB_VSID_KERNEL | llp; | |
| p->thread.ksp_vsid = sp_vsid; | |
| #endif | |
| } | |
| /* | |
| * Copy a thread.. | |
| */ | |
| /* | |
| * Copy architecture-specific thread state | |
| */ | |
| int copy_thread(unsigned long clone_flags, unsigned long usp, | |
| unsigned long kthread_arg, struct task_struct *p) | |
| { | |
| struct pt_regs *childregs, *kregs; | |
| extern void ret_from_fork(void); | |
| extern void ret_from_kernel_thread(void); | |
| void (*f)(void); | |
| unsigned long sp = (unsigned long)task_stack_page(p) + THREAD_SIZE; | |
| struct thread_info *ti = task_thread_info(p); | |
| klp_init_thread_info(ti); | |
| /* Copy registers */ | |
| sp -= sizeof(struct pt_regs); | |
| childregs = (struct pt_regs *) sp; | |
| if (unlikely(p->flags & PF_KTHREAD)) { | |
| /* kernel thread */ | |
| memset(childregs, 0, sizeof(struct pt_regs)); | |
| childregs->gpr[1] = sp + sizeof(struct pt_regs); | |
| /* function */ | |
| if (usp) | |
| childregs->gpr[14] = ppc_function_entry((void *)usp); | |
| #ifdef CONFIG_PPC64 | |
| clear_tsk_thread_flag(p, TIF_32BIT); | |
| childregs->softe = 1; | |
| #endif | |
| childregs->gpr[15] = kthread_arg; | |
| p->thread.regs = NULL; /* no user register state */ | |
| ti->flags |= _TIF_RESTOREALL; | |
| f = ret_from_kernel_thread; | |
| } else { | |
| /* user thread */ | |
| struct pt_regs *regs = current_pt_regs(); | |
| CHECK_FULL_REGS(regs); | |
| *childregs = *regs; | |
| if (usp) | |
| childregs->gpr[1] = usp; | |
| p->thread.regs = childregs; | |
| childregs->gpr[3] = 0; /* Result from fork() */ | |
| if (clone_flags & CLONE_SETTLS) { | |
| #ifdef CONFIG_PPC64 | |
| if (!is_32bit_task()) | |
| childregs->gpr[13] = childregs->gpr[6]; | |
| else | |
| #endif | |
| childregs->gpr[2] = childregs->gpr[6]; | |
| } | |
| f = ret_from_fork; | |
| } | |
| childregs->msr &= ~(MSR_FP|MSR_VEC|MSR_VSX); | |
| sp -= STACK_FRAME_OVERHEAD; | |
| /* | |
| * The way this works is that at some point in the future | |
| * some task will call _switch to switch to the new task. | |
| * That will pop off the stack frame created below and start | |
| * the new task running at ret_from_fork. The new task will | |
| * do some house keeping and then return from the fork or clone | |
| * system call, using the stack frame created above. | |
| */ | |
| ((unsigned long *)sp)[0] = 0; | |
| sp -= sizeof(struct pt_regs); | |
| kregs = (struct pt_regs *) sp; | |
| sp -= STACK_FRAME_OVERHEAD; | |
| p->thread.ksp = sp; | |
| #ifdef CONFIG_PPC32 | |
| p->thread.ksp_limit = (unsigned long)task_stack_page(p) + | |
| _ALIGN_UP(sizeof(struct thread_info), 16); | |
| #endif | |
| #ifdef CONFIG_HAVE_HW_BREAKPOINT | |
| p->thread.ptrace_bps[0] = NULL; | |
| #endif | |
| p->thread.fp_save_area = NULL; | |
| #ifdef CONFIG_ALTIVEC | |
| p->thread.vr_save_area = NULL; | |
| #endif | |
| setup_ksp_vsid(p, sp); | |
| #ifdef CONFIG_PPC64 | |
| if (cpu_has_feature(CPU_FTR_DSCR)) { | |
| p->thread.dscr_inherit = current->thread.dscr_inherit; | |
| p->thread.dscr = mfspr(SPRN_DSCR); | |
| } | |
| if (cpu_has_feature(CPU_FTR_HAS_PPR)) | |
| p->thread.ppr = INIT_PPR; | |
| #endif | |
| kregs->nip = ppc_function_entry(f); | |
| return 0; | |
| } | |
| /* | |
| * Set up a thread for executing a new program | |
| */ | |
| void start_thread(struct pt_regs *regs, unsigned long start, unsigned long sp) | |
| { | |
| #ifdef CONFIG_PPC64 | |
| unsigned long load_addr = regs->gpr[2]; /* saved by ELF_PLAT_INIT */ | |
| #endif | |
| /* | |
| * If we exec out of a kernel thread then thread.regs will not be | |
| * set. Do it now. | |
| */ | |
| if (!current->thread.regs) { | |
| struct pt_regs *regs = task_stack_page(current) + THREAD_SIZE; | |
| current->thread.regs = regs - 1; | |
| } | |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | |
| /* | |
| * Clear any transactional state, we're exec()ing. The cause is | |
| * not important as there will never be a recheckpoint so it's not | |
| * user visible. | |
| */ | |
| if (MSR_TM_SUSPENDED(mfmsr())) | |
| tm_reclaim_current(0); | |
| #endif | |
| memset(regs->gpr, 0, sizeof(regs->gpr)); | |
| regs->ctr = 0; | |
| regs->link = 0; | |
| regs->xer = 0; | |
| regs->ccr = 0; | |
| regs->gpr[1] = sp; | |
| /* | |
| * We have just cleared all the nonvolatile GPRs, so make | |
| * FULL_REGS(regs) return true. This is necessary to allow | |
| * ptrace to examine the thread immediately after exec. | |
| */ | |
| regs->trap &= ~1UL; | |
| #ifdef CONFIG_PPC32 | |
| regs->mq = 0; | |
| regs->nip = start; | |
| regs->msr = MSR_USER; | |
| #else | |
| if (!is_32bit_task()) { | |
| unsigned long entry; | |
| if (is_elf2_task()) { | |
| /* Look ma, no function descriptors! */ | |
| entry = start; | |
| /* | |
| * Ulrich says: | |
| * The latest iteration of the ABI requires that when | |
| * calling a function (at its global entry point), | |
| * the caller must ensure r12 holds the entry point | |
| * address (so that the function can quickly | |
| * establish addressability). | |
| */ | |
| regs->gpr[12] = start; | |
| /* Make sure that's restored on entry to userspace. */ | |
| set_thread_flag(TIF_RESTOREALL); | |
| } else { | |
| unsigned long toc; | |
| /* start is a relocated pointer to the function | |
| * descriptor for the elf _start routine. The first | |
| * entry in the function descriptor is the entry | |
| * address of _start and the second entry is the TOC | |
| * value we need to use. | |
| */ | |
| __get_user(entry, (unsigned long __user *)start); | |
| __get_user(toc, (unsigned long __user *)start+1); | |
| /* Check whether the e_entry function descriptor entries | |
| * need to be relocated before we can use them. | |
| */ | |
| if (load_addr != 0) { | |
| entry += load_addr; | |
| toc += load_addr; | |
| } | |
| regs->gpr[2] = toc; | |
| } | |
| regs->nip = entry; | |
| regs->msr = MSR_USER64; | |
| } else { | |
| regs->nip = start; | |
| regs->gpr[2] = 0; | |
| regs->msr = MSR_USER32; | |
| } | |
| #endif | |
| #ifdef CONFIG_VSX | |
| current->thread.used_vsr = 0; | |
| #endif | |
| current->thread.load_fp = 0; | |
| memset(¤t->thread.fp_state, 0, sizeof(current->thread.fp_state)); | |
| current->thread.fp_save_area = NULL; | |
| #ifdef CONFIG_ALTIVEC | |
| memset(¤t->thread.vr_state, 0, sizeof(current->thread.vr_state)); | |
| current->thread.vr_state.vscr.u[3] = 0x00010000; /* Java mode disabled */ | |
| current->thread.vr_save_area = NULL; | |
| current->thread.vrsave = 0; | |
| current->thread.used_vr = 0; | |
| current->thread.load_vec = 0; | |
| #endif /* CONFIG_ALTIVEC */ | |
| #ifdef CONFIG_SPE | |
| memset(current->thread.evr, 0, sizeof(current->thread.evr)); | |
| current->thread.acc = 0; | |
| current->thread.spefscr = 0; | |
| current->thread.used_spe = 0; | |
| #endif /* CONFIG_SPE */ | |
| #ifdef CONFIG_PPC_TRANSACTIONAL_MEM | |
| current->thread.tm_tfhar = 0; | |
| current->thread.tm_texasr = 0; | |
| current->thread.tm_tfiar = 0; | |
| current->thread.load_tm = 0; | |
| #endif /* CONFIG_PPC_TRANSACTIONAL_MEM */ | |
| } | |
| EXPORT_SYMBOL(start_thread); | |
| #define PR_FP_ALL_EXCEPT (PR_FP_EXC_DIV | PR_FP_EXC_OVF | PR_FP_EXC_UND \ | |
| | PR_FP_EXC_RES | PR_FP_EXC_INV) | |
| int set_fpexc_mode(struct task_struct *tsk, unsigned int val) | |
| { | |
| struct pt_regs *regs = tsk->thread.regs; | |
| /* This is a bit hairy. If we are an SPE enabled processor | |
| * (have embedded fp) we store the IEEE exception enable flags in | |
| * fpexc_mode. fpexc_mode is also used for setting FP exception | |
| * mode (asyn, precise, disabled) for 'Classic' FP. */ | |
| if (val & PR_FP_EXC_SW_ENABLE) { | |
| #ifdef CONFIG_SPE | |
| if (cpu_has_feature(CPU_FTR_SPE)) { | |
| /* | |
| * When the sticky exception bits are set | |
| * directly by userspace, it must call prctl | |
| * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE | |
| * in the existing prctl settings) or | |
| * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in | |
| * the bits being set). <fenv.h> functions | |
| * saving and restoring the whole | |
| * floating-point environment need to do so | |
| * anyway to restore the prctl settings from | |
| * the saved environment. | |
| */ | |
| tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR); | |
| tsk->thread.fpexc_mode = val & | |
| (PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT); | |
| return 0; | |
| } else { | |
| return -EINVAL; | |
| } | |
| #else | |
| return -EINVAL; | |
| #endif | |
| } | |
| /* on a CONFIG_SPE this does not hurt us. The bits that | |
| * __pack_fe01 use do not overlap with bits used for | |
| * PR_FP_EXC_SW_ENABLE. Additionally, the MSR[FE0,FE1] bits | |
| * on CONFIG_SPE implementations are reserved so writing to | |
| * them does not change anything */ | |
| if (val > PR_FP_EXC_PRECISE) | |
| return -EINVAL; | |
| tsk->thread.fpexc_mode = __pack_fe01(val); | |
| if (regs != NULL && (regs->msr & MSR_FP) != 0) | |
| regs->msr = (regs->msr & ~(MSR_FE0|MSR_FE1)) | |
| | tsk->thread.fpexc_mode; | |
| return 0; | |
| } | |
| int get_fpexc_mode(struct task_struct *tsk, unsigned long adr) | |
| { | |
| unsigned int val; | |
| if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE) | |
| #ifdef CONFIG_SPE | |
| if (cpu_has_feature(CPU_FTR_SPE)) { | |
| /* | |
| * When the sticky exception bits are set | |
| * directly by userspace, it must call prctl | |
| * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE | |
| * in the existing prctl settings) or | |
| * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in | |
| * the bits being set). <fenv.h> functions | |
| * saving and restoring the whole | |
| * floating-point environment need to do so | |
| * anyway to restore the prctl settings from | |
| * the saved environment. | |
| */ | |
| tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR); | |
| val = tsk->thread.fpexc_mode; | |
| } else | |
| return -EINVAL; | |
| #else | |
| return -EINVAL; | |
| #endif | |
| else | |
| val = __unpack_fe01(tsk->thread.fpexc_mode); | |
| return put_user(val, (unsigned int __user *) adr); | |
| } | |
| int set_endian(struct task_struct *tsk, unsigned int val) | |
| { | |
| struct pt_regs *regs = tsk->thread.regs; | |
| if ((val == PR_ENDIAN_LITTLE && !cpu_has_feature(CPU_FTR_REAL_LE)) || | |
| (val == PR_ENDIAN_PPC_LITTLE && !cpu_has_feature(CPU_FTR_PPC_LE))) | |
| return -EINVAL; | |
| if (regs == NULL) | |
| return -EINVAL; | |
| if (val == PR_ENDIAN_BIG) | |
| regs->msr &= ~MSR_LE; | |
| else if (val == PR_ENDIAN_LITTLE || val == PR_ENDIAN_PPC_LITTLE) | |
| regs->msr |= MSR_LE; | |
| else | |
| return -EINVAL; | |
| return 0; | |
| } | |
| int get_endian(struct task_struct *tsk, unsigned long adr) | |
| { | |
| struct pt_regs *regs = tsk->thread.regs; | |
| unsigned int val; | |
| if (!cpu_has_feature(CPU_FTR_PPC_LE) && | |
| !cpu_has_feature(CPU_FTR_REAL_LE)) | |
| return -EINVAL; | |
| if (regs == NULL) | |
| return -EINVAL; | |
| if (regs->msr & MSR_LE) { | |
| if (cpu_has_feature(CPU_FTR_REAL_LE)) | |
| val = PR_ENDIAN_LITTLE; | |
| else | |
| val = PR_ENDIAN_PPC_LITTLE; | |
| } else | |
| val = PR_ENDIAN_BIG; | |
| return put_user(val, (unsigned int __user *)adr); | |
| } | |
| int set_unalign_ctl(struct task_struct *tsk, unsigned int val) | |
| { | |
| tsk->thread.align_ctl = val; | |
| return 0; | |
| } | |
| int get_unalign_ctl(struct task_struct *tsk, unsigned long adr) | |
| { | |
| return put_user(tsk->thread.align_ctl, (unsigned int __user *)adr); | |
| } | |
| static inline int valid_irq_stack(unsigned long sp, struct task_struct *p, | |
| unsigned long nbytes) | |
| { | |
| unsigned long stack_page; | |
| unsigned long cpu = task_cpu(p); | |
| /* | |
| * Avoid crashing if the stack has overflowed and corrupted | |
| * task_cpu(p), which is in the thread_info struct. | |
| */ | |
| if (cpu < NR_CPUS && cpu_possible(cpu)) { | |
| stack_page = (unsigned long) hardirq_ctx[cpu]; | |
| if (sp >= stack_page + sizeof(struct thread_struct) | |
| && sp <= stack_page + THREAD_SIZE - nbytes) | |
| return 1; | |
| stack_page = (unsigned long) softirq_ctx[cpu]; | |
| if (sp >= stack_page + sizeof(struct thread_struct) | |
| && sp <= stack_page + THREAD_SIZE - nbytes) | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| int validate_sp(unsigned long sp, struct task_struct *p, | |
| unsigned long nbytes) | |
| { | |
| unsigned long stack_page = (unsigned long)task_stack_page(p); | |
| if (sp >= stack_page + sizeof(struct thread_struct) | |
| && sp <= stack_page + THREAD_SIZE - nbytes) | |
| return 1; | |
| return valid_irq_stack(sp, p, nbytes); | |
| } | |
| EXPORT_SYMBOL(validate_sp); | |
| unsigned long get_wchan(struct task_struct *p) | |
| { | |
| unsigned long ip, sp; | |
| int count = 0; | |
| if (!p || p == current || p->state == TASK_RUNNING) | |
| return 0; | |
| sp = p->thread.ksp; | |
| if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD)) | |
| return 0; | |
| do { | |
| sp = *(unsigned long *)sp; | |
| if (!validate_sp(sp, p, STACK_FRAME_OVERHEAD)) | |
| return 0; | |
| if (count > 0) { | |
| ip = ((unsigned long *)sp)[STACK_FRAME_LR_SAVE]; | |
| if (!in_sched_functions(ip)) | |
| return ip; | |
| } | |
| } while (count++ < 16); | |
| return 0; | |
| } | |
| static int kstack_depth_to_print = CONFIG_PRINT_STACK_DEPTH; | |
| void show_stack(struct task_struct *tsk, unsigned long *stack) | |
| { | |
| unsigned long sp, ip, lr, newsp; | |
| int count = 0; | |
| int firstframe = 1; | |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER | |
| int curr_frame = current->curr_ret_stack; | |
| extern void return_to_handler(void); | |
| unsigned long rth = (unsigned long)return_to_handler; | |
| #endif | |
| sp = (unsigned long) stack; | |
| if (tsk == NULL) | |
| tsk = current; | |
| if (sp == 0) { | |
| if (tsk == current) | |
| sp = current_stack_pointer(); | |
| else | |
| sp = tsk->thread.ksp; | |
| } | |
| lr = 0; | |
| printk("Call Trace:\n"); | |
| do { | |
| if (!validate_sp(sp, tsk, STACK_FRAME_OVERHEAD)) | |
| return; | |
| stack = (unsigned long *) sp; | |
| newsp = stack[0]; | |
| ip = stack[STACK_FRAME_LR_SAVE]; | |
| if (!firstframe || ip != lr) { | |
| printk("["REG"] ["REG"] %pS", sp, ip, (void *)ip); | |
| #ifdef CONFIG_FUNCTION_GRAPH_TRACER | |
| if ((ip == rth) && curr_frame >= 0) { | |
| pr_cont(" (%pS)", | |
| (void *)current->ret_stack[curr_frame].ret); | |
| curr_frame--; | |
| } | |
| #endif | |
| if (firstframe) | |
| pr_cont(" (unreliable)"); | |
| pr_cont("\n"); | |
| } | |
| firstframe = 0; | |
| /* | |
| * See if this is an exception frame. | |
| * We look for the "regshere" marker in the current frame. | |
| */ | |
| if (validate_sp(sp, tsk, STACK_INT_FRAME_SIZE) | |
| && stack[STACK_FRAME_MARKER] == STACK_FRAME_REGS_MARKER) { | |
| struct pt_regs *regs = (struct pt_regs *) | |
| (sp + STACK_FRAME_OVERHEAD); | |
| lr = regs->link; | |
| printk("--- interrupt: %lx at %pS\n LR = %pS\n", | |
| regs->trap, (void *)regs->nip, (void *)lr); | |
| firstframe = 1; | |
| } | |
| sp = newsp; | |
| } while (count++ < kstack_depth_to_print); | |
| } | |
| #ifdef CONFIG_PPC64 | |
| /* Called with hard IRQs off */ | |
| void notrace __ppc64_runlatch_on(void) | |
| { | |
| struct thread_info *ti = current_thread_info(); | |
| if (cpu_has_feature(CPU_FTR_ARCH_206)) { | |
| /* | |
| * Least significant bit (RUN) is the only writable bit of | |
| * the CTRL register, so we can avoid mfspr. 2.06 is not the | |
| * earliest ISA where this is the case, but it's convenient. | |
| */ | |
| mtspr(SPRN_CTRLT, CTRL_RUNLATCH); | |
| } else { | |
| unsigned long ctrl; | |
| /* | |
| * Some architectures (e.g., Cell) have writable fields other | |
| * than RUN, so do the read-modify-write. | |
| */ | |
| ctrl = mfspr(SPRN_CTRLF); | |
| ctrl |= CTRL_RUNLATCH; | |
| mtspr(SPRN_CTRLT, ctrl); | |
| } | |
| ti->local_flags |= _TLF_RUNLATCH; | |
| } | |
| /* Called with hard IRQs off */ | |
| void notrace __ppc64_runlatch_off(void) | |
| { | |
| struct thread_info *ti = current_thread_info(); | |
| ti->local_flags &= ~_TLF_RUNLATCH; | |
| if (cpu_has_feature(CPU_FTR_ARCH_206)) { | |
| mtspr(SPRN_CTRLT, 0); | |
| } else { | |
| unsigned long ctrl; | |
| ctrl = mfspr(SPRN_CTRLF); | |
| ctrl &= ~CTRL_RUNLATCH; | |
| mtspr(SPRN_CTRLT, ctrl); | |
| } | |
| } | |
| #endif /* CONFIG_PPC64 */ | |
| unsigned long arch_align_stack(unsigned long sp) | |
| { | |
| if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space) | |
| sp -= get_random_int() & ~PAGE_MASK; | |
| return sp & ~0xf; | |
| } | |
| static inline unsigned long brk_rnd(void) | |
| { | |
| unsigned long rnd = 0; | |
| /* 8MB for 32bit, 1GB for 64bit */ | |
| if (is_32bit_task()) | |
| rnd = (get_random_long() % (1UL<<(23-PAGE_SHIFT))); | |
| else | |
| rnd = (get_random_long() % (1UL<<(30-PAGE_SHIFT))); | |
| return rnd << PAGE_SHIFT; | |
| } | |
| unsigned long arch_randomize_brk(struct mm_struct *mm) | |
| { | |
| unsigned long base = mm->brk; | |
| unsigned long ret; | |
| #ifdef CONFIG_PPC_STD_MMU_64 | |
| /* | |
| * If we are using 1TB segments and we are allowed to randomise | |
| * the heap, we can put it above 1TB so it is backed by a 1TB | |
| * segment. Otherwise the heap will be in the bottom 1TB | |
| * which always uses 256MB segments and this may result in a | |
| * performance penalty. We don't need to worry about radix. For | |
| * radix, mmu_highuser_ssize remains unchanged from 256MB. | |
| */ | |
| if (!is_32bit_task() && (mmu_highuser_ssize == MMU_SEGSIZE_1T)) | |
| base = max_t(unsigned long, mm->brk, 1UL << SID_SHIFT_1T); | |
| #endif | |
| ret = PAGE_ALIGN(base + brk_rnd()); | |
| if (ret < mm->brk) | |
| return mm->brk; | |
| return ret; | |
| } | |