| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/err.h> | |
| #include <linux/slab.h> | |
| #include <linux/mm_types.h> | |
| #include <linux/sched/task.h> | |
| #include <asm/branch.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/fpu_emulator.h> | |
| #include <asm/inst.h> | |
| #include <asm/mipsregs.h> | |
| #include <linux/uaccess.h> | |
| /** | |
| * struct emuframe - The 'emulation' frame structure | |
| * @emul: The instruction to 'emulate'. | |
| * @badinst: A break instruction to cause a return to the kernel. | |
| * | |
| * This structure defines the frames placed within the delay slot emulation | |
| * page in response to a call to mips_dsemul(). Each thread may be allocated | |
| * only one frame at any given time. The kernel stores within it the | |
| * instruction to be 'emulated' followed by a break instruction, then | |
| * executes the frame in user mode. The break causes a trap to the kernel | |
| * which leads to do_dsemulret() being called unless the instruction in | |
| * @emul causes a trap itself, is a branch, or a signal is delivered to | |
| * the thread. In these cases the allocated frame will either be reused by | |
| * a subsequent delay slot 'emulation', or be freed during signal delivery or | |
| * upon thread exit. | |
| * | |
| * This approach is used because: | |
| * | |
| * - Actually emulating all instructions isn't feasible. We would need to | |
| * be able to handle instructions from all revisions of the MIPS ISA, | |
| * all ASEs & all vendor instruction set extensions. This would be a | |
| * whole lot of work & continual maintenance burden as new instructions | |
| * are introduced, and in the case of some vendor extensions may not | |
| * even be possible. Thus we need to take the approach of actually | |
| * executing the instruction. | |
| * | |
| * - We must execute the instruction within user context. If we were to | |
| * execute the instruction in kernel mode then it would have access to | |
| * kernel resources without very careful checks, leaving us with a | |
| * high potential for security or stability issues to arise. | |
| * | |
| * - We used to place the frame on the users stack, but this requires | |
| * that the stack be executable. This is bad for security so the | |
| * per-process page is now used instead. | |
| * | |
| * - The instruction in @emul may be something entirely invalid for a | |
| * delay slot. The user may (intentionally or otherwise) place a branch | |
| * in a delay slot, or a kernel mode instruction, or something else | |
| * which generates an exception. Thus we can't rely upon the break in | |
| * @badinst always being hit. For this reason we track the index of the | |
| * frame allocated to each thread, allowing us to clean it up at later | |
| * points such as signal delivery or thread exit. | |
| * | |
| * - The user may generate a fake struct emuframe if they wish, invoking | |
| * the BRK_MEMU break instruction themselves. We must therefore not | |
| * trust that BRK_MEMU means there's actually a valid frame allocated | |
| * to the thread, and must not allow the user to do anything they | |
| * couldn't already. | |
| */ | |
| struct emuframe { | |
| mips_instruction emul; | |
| mips_instruction badinst; | |
| }; | |
| static const int emupage_frame_count = PAGE_SIZE / sizeof(struct emuframe); | |
| static inline __user struct emuframe *dsemul_page(void) | |
| { | |
| return (__user struct emuframe *)STACK_TOP; | |
| } | |
| static int alloc_emuframe(void) | |
| { | |
| mm_context_t *mm_ctx = ¤t->mm->context; | |
| int idx; | |
| retry: | |
| spin_lock(&mm_ctx->bd_emupage_lock); | |
| /* Ensure we have an allocation bitmap */ | |
| if (!mm_ctx->bd_emupage_allocmap) { | |
| mm_ctx->bd_emupage_allocmap = | |
| kcalloc(BITS_TO_LONGS(emupage_frame_count), | |
| sizeof(unsigned long), | |
| GFP_ATOMIC); | |
| if (!mm_ctx->bd_emupage_allocmap) { | |
| idx = BD_EMUFRAME_NONE; | |
| goto out_unlock; | |
| } | |
| } | |
| /* Attempt to allocate a single bit/frame */ | |
| idx = bitmap_find_free_region(mm_ctx->bd_emupage_allocmap, | |
| emupage_frame_count, 0); | |
| if (idx < 0) { | |
| /* | |
| * Failed to allocate a frame. We'll wait until one becomes | |
| * available. We unlock the page so that other threads actually | |
| * get the opportunity to free their frames, which means | |
| * technically the result of bitmap_full may be incorrect. | |
| * However the worst case is that we repeat all this and end up | |
| * back here again. | |
| */ | |
| spin_unlock(&mm_ctx->bd_emupage_lock); | |
| if (!wait_event_killable(mm_ctx->bd_emupage_queue, | |
| !bitmap_full(mm_ctx->bd_emupage_allocmap, | |
| emupage_frame_count))) | |
| goto retry; | |
| /* Received a fatal signal - just give in */ | |
| return BD_EMUFRAME_NONE; | |
| } | |
| /* Success! */ | |
| pr_debug("allocate emuframe %d to %d\n", idx, current->pid); | |
| out_unlock: | |
| spin_unlock(&mm_ctx->bd_emupage_lock); | |
| return idx; | |
| } | |
| static void free_emuframe(int idx, struct mm_struct *mm) | |
| { | |
| mm_context_t *mm_ctx = &mm->context; | |
| spin_lock(&mm_ctx->bd_emupage_lock); | |
| pr_debug("free emuframe %d from %d\n", idx, current->pid); | |
| bitmap_clear(mm_ctx->bd_emupage_allocmap, idx, 1); | |
| /* If some thread is waiting for a frame, now's its chance */ | |
| wake_up(&mm_ctx->bd_emupage_queue); | |
| spin_unlock(&mm_ctx->bd_emupage_lock); | |
| } | |
| static bool within_emuframe(struct pt_regs *regs) | |
| { | |
| unsigned long base = (unsigned long)dsemul_page(); | |
| if (regs->cp0_epc < base) | |
| return false; | |
| if (regs->cp0_epc >= (base + PAGE_SIZE)) | |
| return false; | |
| return true; | |
| } | |
| bool dsemul_thread_cleanup(struct task_struct *tsk) | |
| { | |
| int fr_idx; | |
| /* Clear any allocated frame, retrieving its index */ | |
| fr_idx = atomic_xchg(&tsk->thread.bd_emu_frame, BD_EMUFRAME_NONE); | |
| /* If no frame was allocated, we're done */ | |
| if (fr_idx == BD_EMUFRAME_NONE) | |
| return false; | |
| task_lock(tsk); | |
| /* Free the frame that this thread had allocated */ | |
| if (tsk->mm) | |
| free_emuframe(fr_idx, tsk->mm); | |
| task_unlock(tsk); | |
| return true; | |
| } | |
| bool dsemul_thread_rollback(struct pt_regs *regs) | |
| { | |
| struct emuframe __user *fr; | |
| int fr_idx; | |
| /* Do nothing if we're not executing from a frame */ | |
| if (!within_emuframe(regs)) | |
| return false; | |
| /* Find the frame being executed */ | |
| fr_idx = atomic_read(¤t->thread.bd_emu_frame); | |
| if (fr_idx == BD_EMUFRAME_NONE) | |
| return false; | |
| fr = &dsemul_page()[fr_idx]; | |
| /* | |
| * If the PC is at the emul instruction, roll back to the branch. If | |
| * PC is at the badinst (break) instruction, we've already emulated the | |
| * instruction so progress to the continue PC. If it's anything else | |
| * then something is amiss & the user has branched into some other area | |
| * of the emupage - we'll free the allocated frame anyway. | |
| */ | |
| if (msk_isa16_mode(regs->cp0_epc) == (unsigned long)&fr->emul) | |
| regs->cp0_epc = current->thread.bd_emu_branch_pc; | |
| else if (msk_isa16_mode(regs->cp0_epc) == (unsigned long)&fr->badinst) | |
| regs->cp0_epc = current->thread.bd_emu_cont_pc; | |
| atomic_set(¤t->thread.bd_emu_frame, BD_EMUFRAME_NONE); | |
| free_emuframe(fr_idx, current->mm); | |
| return true; | |
| } | |
| void dsemul_mm_cleanup(struct mm_struct *mm) | |
| { | |
| mm_context_t *mm_ctx = &mm->context; | |
| kfree(mm_ctx->bd_emupage_allocmap); | |
| } | |
| int mips_dsemul(struct pt_regs *regs, mips_instruction ir, | |
| unsigned long branch_pc, unsigned long cont_pc) | |
| { | |
| int isa16 = get_isa16_mode(regs->cp0_epc); | |
| mips_instruction break_math; | |
| unsigned long fr_uaddr; | |
| struct emuframe fr; | |
| int fr_idx, ret; | |
| /* NOP is easy */ | |
| if (ir == 0) | |
| return -1; | |
| /* microMIPS instructions */ | |
| if (isa16) { | |
| union mips_instruction insn = { .word = ir }; | |
| /* NOP16 aka MOVE16 $0, $0 */ | |
| if ((ir >> 16) == MM_NOP16) | |
| return -1; | |
| /* ADDIUPC */ | |
| if (insn.mm_a_format.opcode == mm_addiupc_op) { | |
| unsigned int rs; | |
| s32 v; | |
| rs = (((insn.mm_a_format.rs + 0xe) & 0xf) + 2); | |
| v = regs->cp0_epc & ~3; | |
| v += insn.mm_a_format.simmediate << 2; | |
| regs->regs[rs] = (long)v; | |
| return -1; | |
| } | |
| } | |
| pr_debug("dsemul 0x%08lx cont at 0x%08lx\n", regs->cp0_epc, cont_pc); | |
| /* Allocate a frame if we don't already have one */ | |
| fr_idx = atomic_read(¤t->thread.bd_emu_frame); | |
| if (fr_idx == BD_EMUFRAME_NONE) | |
| fr_idx = alloc_emuframe(); | |
| if (fr_idx == BD_EMUFRAME_NONE) | |
| return SIGBUS; | |
| /* Retrieve the appropriately encoded break instruction */ | |
| break_math = BREAK_MATH(isa16); | |
| /* Write the instructions to the frame */ | |
| if (isa16) { | |
| union mips_instruction _emul = { | |
| .halfword = { ir >> 16, ir } | |
| }; | |
| union mips_instruction _badinst = { | |
| .halfword = { break_math >> 16, break_math } | |
| }; | |
| fr.emul = _emul.word; | |
| fr.badinst = _badinst.word; | |
| } else { | |
| fr.emul = ir; | |
| fr.badinst = break_math; | |
| } | |
| /* Write the frame to user memory */ | |
| fr_uaddr = (unsigned long)&dsemul_page()[fr_idx]; | |
| ret = access_process_vm(current, fr_uaddr, &fr, sizeof(fr), | |
| FOLL_FORCE | FOLL_WRITE); | |
| if (unlikely(ret != sizeof(fr))) { | |
| MIPS_FPU_EMU_INC_STATS(errors); | |
| free_emuframe(fr_idx, current->mm); | |
| return SIGBUS; | |
| } | |
| /* Record the PC of the branch, PC to continue from & frame index */ | |
| current->thread.bd_emu_branch_pc = branch_pc; | |
| current->thread.bd_emu_cont_pc = cont_pc; | |
| atomic_set(¤t->thread.bd_emu_frame, fr_idx); | |
| /* Change user register context to execute the frame */ | |
| regs->cp0_epc = fr_uaddr | isa16; | |
| return 0; | |
| } | |
| bool do_dsemulret(struct pt_regs *xcp) | |
| { | |
| /* Cleanup the allocated frame, returning if there wasn't one */ | |
| if (!dsemul_thread_cleanup(current)) { | |
| MIPS_FPU_EMU_INC_STATS(errors); | |
| return false; | |
| } | |
| /* Set EPC to return to post-branch instruction */ | |
| xcp->cp0_epc = current->thread.bd_emu_cont_pc; | |
| pr_debug("dsemulret to 0x%08lx\n", xcp->cp0_epc); | |
| MIPS_FPU_EMU_INC_STATS(ds_emul); | |
| return true; | |
| } |