| /* SPDX-License-Identifier: GPL-2.0 */ | |
| #ifndef __ASM_SPINLOCK_H | |
| #define __ASM_SPINLOCK_H | |
| #if __LINUX_ARM_ARCH__ < 6 | |
| #error SMP not supported on pre-ARMv6 CPUs | |
| #endif | |
| #include <linux/prefetch.h> | |
| #include <asm/barrier.h> | |
| #include <asm/processor.h> | |
| /* | |
| * sev and wfe are ARMv6K extensions. Uniprocessor ARMv6 may not have the K | |
| * extensions, so when running on UP, we have to patch these instructions away. | |
| */ | |
| #ifdef CONFIG_THUMB2_KERNEL | |
| /* | |
| * For Thumb-2, special care is needed to ensure that the conditional WFE | |
| * instruction really does assemble to exactly 4 bytes (as required by | |
| * the SMP_ON_UP fixup code). By itself "wfene" might cause the | |
| * assembler to insert a extra (16-bit) IT instruction, depending on the | |
| * presence or absence of neighbouring conditional instructions. | |
| * | |
| * To avoid this unpredictableness, an approprite IT is inserted explicitly: | |
| * the assembler won't change IT instructions which are explicitly present | |
| * in the input. | |
| */ | |
| #define WFE(cond) __ALT_SMP_ASM( \ | |
| "it " cond "\n\t" \ | |
| "wfe" cond ".n", \ | |
| \ | |
| "nop.w" \ | |
| ) | |
| #else | |
| #define WFE(cond) __ALT_SMP_ASM("wfe" cond, "nop") | |
| #endif | |
| #define SEV __ALT_SMP_ASM(WASM(sev), WASM(nop)) | |
| static inline void dsb_sev(void) | |
| { | |
| dsb(ishst); | |
| __asm__(SEV); | |
| } | |
| /* | |
| * ARMv6 ticket-based spin-locking. | |
| * | |
| * A memory barrier is required after we get a lock, and before we | |
| * release it, because V6 CPUs are assumed to have weakly ordered | |
| * memory. | |
| */ | |
| #define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock) | |
| static inline void arch_spin_lock(arch_spinlock_t *lock) | |
| { | |
| unsigned long tmp; | |
| u32 newval; | |
| arch_spinlock_t lockval; | |
| prefetchw(&lock->slock); | |
| __asm__ __volatile__( | |
| "1: ldrex %0, [%3]\n" | |
| " add %1, %0, %4\n" | |
| " strex %2, %1, [%3]\n" | |
| " teq %2, #0\n" | |
| " bne 1b" | |
| : "=&r" (lockval), "=&r" (newval), "=&r" (tmp) | |
| : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) | |
| : "cc"); | |
| while (lockval.tickets.next != lockval.tickets.owner) { | |
| wfe(); | |
| lockval.tickets.owner = ACCESS_ONCE(lock->tickets.owner); | |
| } | |
| smp_mb(); | |
| } | |
| static inline int arch_spin_trylock(arch_spinlock_t *lock) | |
| { | |
| unsigned long contended, res; | |
| u32 slock; | |
| prefetchw(&lock->slock); | |
| do { | |
| __asm__ __volatile__( | |
| " ldrex %0, [%3]\n" | |
| " mov %2, #0\n" | |
| " subs %1, %0, %0, ror #16\n" | |
| " addeq %0, %0, %4\n" | |
| " strexeq %2, %0, [%3]" | |
| : "=&r" (slock), "=&r" (contended), "=&r" (res) | |
| : "r" (&lock->slock), "I" (1 << TICKET_SHIFT) | |
| : "cc"); | |
| } while (res); | |
| if (!contended) { | |
| smp_mb(); | |
| return 1; | |
| } else { | |
| return 0; | |
| } | |
| } | |
| static inline void arch_spin_unlock(arch_spinlock_t *lock) | |
| { | |
| smp_mb(); | |
| lock->tickets.owner++; | |
| dsb_sev(); | |
| } | |
| static inline int arch_spin_value_unlocked(arch_spinlock_t lock) | |
| { | |
| return lock.tickets.owner == lock.tickets.next; | |
| } | |
| static inline int arch_spin_is_locked(arch_spinlock_t *lock) | |
| { | |
| return !arch_spin_value_unlocked(READ_ONCE(*lock)); | |
| } | |
| static inline int arch_spin_is_contended(arch_spinlock_t *lock) | |
| { | |
| struct __raw_tickets tickets = READ_ONCE(lock->tickets); | |
| return (tickets.next - tickets.owner) > 1; | |
| } | |
| #define arch_spin_is_contended arch_spin_is_contended | |
| /* | |
| * RWLOCKS | |
| * | |
| * | |
| * Write locks are easy - we just set bit 31. When unlocking, we can | |
| * just write zero since the lock is exclusively held. | |
| */ | |
| static inline void arch_write_lock(arch_rwlock_t *rw) | |
| { | |
| unsigned long tmp; | |
| prefetchw(&rw->lock); | |
| __asm__ __volatile__( | |
| "1: ldrex %0, [%1]\n" | |
| " teq %0, #0\n" | |
| WFE("ne") | |
| " strexeq %0, %2, [%1]\n" | |
| " teq %0, #0\n" | |
| " bne 1b" | |
| : "=&r" (tmp) | |
| : "r" (&rw->lock), "r" (0x80000000) | |
| : "cc"); | |
| smp_mb(); | |
| } | |
| static inline int arch_write_trylock(arch_rwlock_t *rw) | |
| { | |
| unsigned long contended, res; | |
| prefetchw(&rw->lock); | |
| do { | |
| __asm__ __volatile__( | |
| " ldrex %0, [%2]\n" | |
| " mov %1, #0\n" | |
| " teq %0, #0\n" | |
| " strexeq %1, %3, [%2]" | |
| : "=&r" (contended), "=&r" (res) | |
| : "r" (&rw->lock), "r" (0x80000000) | |
| : "cc"); | |
| } while (res); | |
| if (!contended) { | |
| smp_mb(); | |
| return 1; | |
| } else { | |
| return 0; | |
| } | |
| } | |
| static inline void arch_write_unlock(arch_rwlock_t *rw) | |
| { | |
| smp_mb(); | |
| __asm__ __volatile__( | |
| "str %1, [%0]\n" | |
| : | |
| : "r" (&rw->lock), "r" (0) | |
| : "cc"); | |
| dsb_sev(); | |
| } | |
| /* write_can_lock - would write_trylock() succeed? */ | |
| #define arch_write_can_lock(x) (ACCESS_ONCE((x)->lock) == 0) | |
| /* | |
| * Read locks are a bit more hairy: | |
| * - Exclusively load the lock value. | |
| * - Increment it. | |
| * - Store new lock value if positive, and we still own this location. | |
| * If the value is negative, we've already failed. | |
| * - If we failed to store the value, we want a negative result. | |
| * - If we failed, try again. | |
| * Unlocking is similarly hairy. We may have multiple read locks | |
| * currently active. However, we know we won't have any write | |
| * locks. | |
| */ | |
| static inline void arch_read_lock(arch_rwlock_t *rw) | |
| { | |
| unsigned long tmp, tmp2; | |
| prefetchw(&rw->lock); | |
| __asm__ __volatile__( | |
| "1: ldrex %0, [%2]\n" | |
| " adds %0, %0, #1\n" | |
| " strexpl %1, %0, [%2]\n" | |
| WFE("mi") | |
| " rsbpls %0, %1, #0\n" | |
| " bmi 1b" | |
| : "=&r" (tmp), "=&r" (tmp2) | |
| : "r" (&rw->lock) | |
| : "cc"); | |
| smp_mb(); | |
| } | |
| static inline void arch_read_unlock(arch_rwlock_t *rw) | |
| { | |
| unsigned long tmp, tmp2; | |
| smp_mb(); | |
| prefetchw(&rw->lock); | |
| __asm__ __volatile__( | |
| "1: ldrex %0, [%2]\n" | |
| " sub %0, %0, #1\n" | |
| " strex %1, %0, [%2]\n" | |
| " teq %1, #0\n" | |
| " bne 1b" | |
| : "=&r" (tmp), "=&r" (tmp2) | |
| : "r" (&rw->lock) | |
| : "cc"); | |
| if (tmp == 0) | |
| dsb_sev(); | |
| } | |
| static inline int arch_read_trylock(arch_rwlock_t *rw) | |
| { | |
| unsigned long contended, res; | |
| prefetchw(&rw->lock); | |
| do { | |
| __asm__ __volatile__( | |
| " ldrex %0, [%2]\n" | |
| " mov %1, #0\n" | |
| " adds %0, %0, #1\n" | |
| " strexpl %1, %0, [%2]" | |
| : "=&r" (contended), "=&r" (res) | |
| : "r" (&rw->lock) | |
| : "cc"); | |
| } while (res); | |
| /* If the lock is negative, then it is already held for write. */ | |
| if (contended < 0x80000000) { | |
| smp_mb(); | |
| return 1; | |
| } else { | |
| return 0; | |
| } | |
| } | |
| /* read_can_lock - would read_trylock() succeed? */ | |
| #define arch_read_can_lock(x) (ACCESS_ONCE((x)->lock) < 0x80000000) | |
| #define arch_read_lock_flags(lock, flags) arch_read_lock(lock) | |
| #define arch_write_lock_flags(lock, flags) arch_write_lock(lock) | |
| #define arch_spin_relax(lock) cpu_relax() | |
| #define arch_read_relax(lock) cpu_relax() | |
| #define arch_write_relax(lock) cpu_relax() | |
| #endif /* __ASM_SPINLOCK_H */ |