| // SPDX-License-Identifier: GPL-2.0 | |
| #include <linux/kernel.h> | |
| #include <linux/string.h> | |
| #include <linux/bitops.h> | |
| #include <linux/smp.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/clock.h> | |
| #include <linux/thread_info.h> | |
| #include <linux/init.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/cpufeature.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/msr.h> | |
| #include <asm/bugs.h> | |
| #include <asm/cpu.h> | |
| #include <asm/intel-family.h> | |
| #include <asm/microcode_intel.h> | |
| #include <asm/hwcap2.h> | |
| #include <asm/elf.h> | |
| #ifdef CONFIG_X86_64 | |
| #include <linux/topology.h> | |
| #endif | |
| #include "cpu.h" | |
| #ifdef CONFIG_X86_LOCAL_APIC | |
| #include <asm/mpspec.h> | |
| #include <asm/apic.h> | |
| #endif | |
| /* | |
| * Just in case our CPU detection goes bad, or you have a weird system, | |
| * allow a way to override the automatic disabling of MPX. | |
| */ | |
| static int forcempx; | |
| static int __init forcempx_setup(char *__unused) | |
| { | |
| forcempx = 1; | |
| return 1; | |
| } | |
| __setup("intel-skd-046-workaround=disable", forcempx_setup); | |
| void check_mpx_erratum(struct cpuinfo_x86 *c) | |
| { | |
| if (forcempx) | |
| return; | |
| /* | |
| * Turn off the MPX feature on CPUs where SMEP is not | |
| * available or disabled. | |
| * | |
| * Works around Intel Erratum SKD046: "Branch Instructions | |
| * May Initialize MPX Bound Registers Incorrectly". | |
| * | |
| * This might falsely disable MPX on systems without | |
| * SMEP, like Atom processors without SMEP. But there | |
| * is no such hardware known at the moment. | |
| */ | |
| if (cpu_has(c, X86_FEATURE_MPX) && !cpu_has(c, X86_FEATURE_SMEP)) { | |
| setup_clear_cpu_cap(X86_FEATURE_MPX); | |
| pr_warn("x86/mpx: Disabling MPX since SMEP not present\n"); | |
| } | |
| } | |
| static bool ring3mwait_disabled __read_mostly; | |
| static int __init ring3mwait_disable(char *__unused) | |
| { | |
| ring3mwait_disabled = true; | |
| return 0; | |
| } | |
| __setup("ring3mwait=disable", ring3mwait_disable); | |
| static void probe_xeon_phi_r3mwait(struct cpuinfo_x86 *c) | |
| { | |
| /* | |
| * Ring 3 MONITOR/MWAIT feature cannot be detected without | |
| * cpu model and family comparison. | |
| */ | |
| if (c->x86 != 6) | |
| return; | |
| switch (c->x86_model) { | |
| case INTEL_FAM6_XEON_PHI_KNL: | |
| case INTEL_FAM6_XEON_PHI_KNM: | |
| break; | |
| default: | |
| return; | |
| } | |
| if (ring3mwait_disabled) | |
| return; | |
| set_cpu_cap(c, X86_FEATURE_RING3MWAIT); | |
| this_cpu_or(msr_misc_features_shadow, | |
| 1UL << MSR_MISC_FEATURES_ENABLES_RING3MWAIT_BIT); | |
| if (c == &boot_cpu_data) | |
| ELF_HWCAP2 |= HWCAP2_RING3MWAIT; | |
| } | |
| /* | |
| * Early microcode releases for the Spectre v2 mitigation were broken. | |
| * Information taken from; | |
| * - https://newsroom.intel.com/wp-content/uploads/sites/11/2018/03/microcode-update-guidance.pdf | |
| * - https://kb.vmware.com/s/article/52345 | |
| * - Microcode revisions observed in the wild | |
| * - Release note from 20180108 microcode release | |
| */ | |
| struct sku_microcode { | |
| u8 model; | |
| u8 stepping; | |
| u32 microcode; | |
| }; | |
| static const struct sku_microcode spectre_bad_microcodes[] = { | |
| { INTEL_FAM6_KABYLAKE_DESKTOP, 0x0B, 0x80 }, | |
| { INTEL_FAM6_KABYLAKE_DESKTOP, 0x0A, 0x80 }, | |
| { INTEL_FAM6_KABYLAKE_DESKTOP, 0x09, 0x80 }, | |
| { INTEL_FAM6_KABYLAKE_MOBILE, 0x0A, 0x80 }, | |
| { INTEL_FAM6_KABYLAKE_MOBILE, 0x09, 0x80 }, | |
| { INTEL_FAM6_SKYLAKE_X, 0x03, 0x0100013e }, | |
| { INTEL_FAM6_SKYLAKE_X, 0x04, 0x0200003c }, | |
| { INTEL_FAM6_BROADWELL_CORE, 0x04, 0x28 }, | |
| { INTEL_FAM6_BROADWELL_GT3E, 0x01, 0x1b }, | |
| { INTEL_FAM6_BROADWELL_XEON_D, 0x02, 0x14 }, | |
| { INTEL_FAM6_BROADWELL_XEON_D, 0x03, 0x07000011 }, | |
| { INTEL_FAM6_BROADWELL_X, 0x01, 0x0b000025 }, | |
| { INTEL_FAM6_HASWELL_ULT, 0x01, 0x21 }, | |
| { INTEL_FAM6_HASWELL_GT3E, 0x01, 0x18 }, | |
| { INTEL_FAM6_HASWELL_CORE, 0x03, 0x23 }, | |
| { INTEL_FAM6_HASWELL_X, 0x02, 0x3b }, | |
| { INTEL_FAM6_HASWELL_X, 0x04, 0x10 }, | |
| { INTEL_FAM6_IVYBRIDGE_X, 0x04, 0x42a }, | |
| /* Observed in the wild */ | |
| { INTEL_FAM6_SANDYBRIDGE_X, 0x06, 0x61b }, | |
| { INTEL_FAM6_SANDYBRIDGE_X, 0x07, 0x712 }, | |
| }; | |
| static bool bad_spectre_microcode(struct cpuinfo_x86 *c) | |
| { | |
| int i; | |
| /* | |
| * We know that the hypervisor lie to us on the microcode version so | |
| * we may as well hope that it is running the correct version. | |
| */ | |
| if (cpu_has(c, X86_FEATURE_HYPERVISOR)) | |
| return false; | |
| if (c->x86 != 6) | |
| return false; | |
| for (i = 0; i < ARRAY_SIZE(spectre_bad_microcodes); i++) { | |
| if (c->x86_model == spectre_bad_microcodes[i].model && | |
| c->x86_stepping == spectre_bad_microcodes[i].stepping) | |
| return (c->microcode <= spectre_bad_microcodes[i].microcode); | |
| } | |
| return false; | |
| } | |
| static void early_init_intel(struct cpuinfo_x86 *c) | |
| { | |
| u64 misc_enable; | |
| /* Unmask CPUID levels if masked: */ | |
| if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { | |
| if (msr_clear_bit(MSR_IA32_MISC_ENABLE, | |
| MSR_IA32_MISC_ENABLE_LIMIT_CPUID_BIT) > 0) { | |
| c->cpuid_level = cpuid_eax(0); | |
| get_cpu_cap(c); | |
| } | |
| } | |
| if ((c->x86 == 0xf && c->x86_model >= 0x03) || | |
| (c->x86 == 0x6 && c->x86_model >= 0x0e)) | |
| set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); | |
| if (c->x86 >= 6 && !cpu_has(c, X86_FEATURE_IA64)) | |
| c->microcode = intel_get_microcode_revision(); | |
| /* Now if any of them are set, check the blacklist and clear the lot */ | |
| if ((cpu_has(c, X86_FEATURE_SPEC_CTRL) || | |
| cpu_has(c, X86_FEATURE_INTEL_STIBP) || | |
| cpu_has(c, X86_FEATURE_IBRS) || cpu_has(c, X86_FEATURE_IBPB) || | |
| cpu_has(c, X86_FEATURE_STIBP)) && bad_spectre_microcode(c)) { | |
| pr_warn("Intel Spectre v2 broken microcode detected; disabling Speculation Control\n"); | |
| setup_clear_cpu_cap(X86_FEATURE_IBRS); | |
| setup_clear_cpu_cap(X86_FEATURE_IBPB); | |
| setup_clear_cpu_cap(X86_FEATURE_STIBP); | |
| setup_clear_cpu_cap(X86_FEATURE_SPEC_CTRL); | |
| setup_clear_cpu_cap(X86_FEATURE_MSR_SPEC_CTRL); | |
| setup_clear_cpu_cap(X86_FEATURE_INTEL_STIBP); | |
| setup_clear_cpu_cap(X86_FEATURE_SSBD); | |
| setup_clear_cpu_cap(X86_FEATURE_SPEC_CTRL_SSBD); | |
| } | |
| /* | |
| * Atom erratum AAE44/AAF40/AAG38/AAH41: | |
| * | |
| * A race condition between speculative fetches and invalidating | |
| * a large page. This is worked around in microcode, but we | |
| * need the microcode to have already been loaded... so if it is | |
| * not, recommend a BIOS update and disable large pages. | |
| */ | |
| if (c->x86 == 6 && c->x86_model == 0x1c && c->x86_stepping <= 2 && | |
| c->microcode < 0x20e) { | |
| pr_warn("Atom PSE erratum detected, BIOS microcode update recommended\n"); | |
| clear_cpu_cap(c, X86_FEATURE_PSE); | |
| } | |
| #ifdef CONFIG_X86_64 | |
| set_cpu_cap(c, X86_FEATURE_SYSENTER32); | |
| #else | |
| /* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */ | |
| if (c->x86 == 15 && c->x86_cache_alignment == 64) | |
| c->x86_cache_alignment = 128; | |
| #endif | |
| /* CPUID workaround for 0F33/0F34 CPU */ | |
| if (c->x86 == 0xF && c->x86_model == 0x3 | |
| && (c->x86_stepping == 0x3 || c->x86_stepping == 0x4)) | |
| c->x86_phys_bits = 36; | |
| /* | |
| * c->x86_power is 8000_0007 edx. Bit 8 is TSC runs at constant rate | |
| * with P/T states and does not stop in deep C-states. | |
| * | |
| * It is also reliable across cores and sockets. (but not across | |
| * cabinets - we turn it off in that case explicitly.) | |
| */ | |
| if (c->x86_power & (1 << 8)) { | |
| set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); | |
| set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); | |
| } | |
| /* Penwell and Cloverview have the TSC which doesn't sleep on S3 */ | |
| if (c->x86 == 6) { | |
| switch (c->x86_model) { | |
| case 0x27: /* Penwell */ | |
| case 0x35: /* Cloverview */ | |
| case 0x4a: /* Merrifield */ | |
| set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC_S3); | |
| break; | |
| default: | |
| break; | |
| } | |
| } | |
| /* | |
| * There is a known erratum on Pentium III and Core Solo | |
| * and Core Duo CPUs. | |
| * " Page with PAT set to WC while associated MTRR is UC | |
| * may consolidate to UC " | |
| * Because of this erratum, it is better to stick with | |
| * setting WC in MTRR rather than using PAT on these CPUs. | |
| * | |
| * Enable PAT WC only on P4, Core 2 or later CPUs. | |
| */ | |
| if (c->x86 == 6 && c->x86_model < 15) | |
| clear_cpu_cap(c, X86_FEATURE_PAT); | |
| /* | |
| * If fast string is not enabled in IA32_MISC_ENABLE for any reason, | |
| * clear the fast string and enhanced fast string CPU capabilities. | |
| */ | |
| if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { | |
| rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); | |
| if (!(misc_enable & MSR_IA32_MISC_ENABLE_FAST_STRING)) { | |
| pr_info("Disabled fast string operations\n"); | |
| setup_clear_cpu_cap(X86_FEATURE_REP_GOOD); | |
| setup_clear_cpu_cap(X86_FEATURE_ERMS); | |
| } | |
| } | |
| /* | |
| * Intel Quark Core DevMan_001.pdf section 6.4.11 | |
| * "The operating system also is required to invalidate (i.e., flush) | |
| * the TLB when any changes are made to any of the page table entries. | |
| * The operating system must reload CR3 to cause the TLB to be flushed" | |
| * | |
| * As a result, boot_cpu_has(X86_FEATURE_PGE) in arch/x86/include/asm/tlbflush.h | |
| * should be false so that __flush_tlb_all() causes CR3 insted of CR4.PGE | |
| * to be modified. | |
| */ | |
| if (c->x86 == 5 && c->x86_model == 9) { | |
| pr_info("Disabling PGE capability bit\n"); | |
| setup_clear_cpu_cap(X86_FEATURE_PGE); | |
| } | |
| if (c->cpuid_level >= 0x00000001) { | |
| u32 eax, ebx, ecx, edx; | |
| cpuid(0x00000001, &eax, &ebx, &ecx, &edx); | |
| /* | |
| * If HTT (EDX[28]) is set EBX[16:23] contain the number of | |
| * apicids which are reserved per package. Store the resulting | |
| * shift value for the package management code. | |
| */ | |
| if (edx & (1U << 28)) | |
| c->x86_coreid_bits = get_count_order((ebx >> 16) & 0xff); | |
| } | |
| check_mpx_erratum(c); | |
| /* | |
| * Get the number of SMT siblings early from the extended topology | |
| * leaf, if available. Otherwise try the legacy SMT detection. | |
| */ | |
| if (detect_extended_topology_early(c) < 0) | |
| detect_ht_early(c); | |
| } | |
| #ifdef CONFIG_X86_32 | |
| /* | |
| * Early probe support logic for ppro memory erratum #50 | |
| * | |
| * This is called before we do cpu ident work | |
| */ | |
| int ppro_with_ram_bug(void) | |
| { | |
| /* Uses data from early_cpu_detect now */ | |
| if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && | |
| boot_cpu_data.x86 == 6 && | |
| boot_cpu_data.x86_model == 1 && | |
| boot_cpu_data.x86_stepping < 8) { | |
| pr_info("Pentium Pro with Errata#50 detected. Taking evasive action.\n"); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| static void intel_smp_check(struct cpuinfo_x86 *c) | |
| { | |
| /* calling is from identify_secondary_cpu() ? */ | |
| if (!c->cpu_index) | |
| return; | |
| /* | |
| * Mask B, Pentium, but not Pentium MMX | |
| */ | |
| if (c->x86 == 5 && | |
| c->x86_stepping >= 1 && c->x86_stepping <= 4 && | |
| c->x86_model <= 3) { | |
| /* | |
| * Remember we have B step Pentia with bugs | |
| */ | |
| WARN_ONCE(1, "WARNING: SMP operation may be unreliable" | |
| "with B stepping processors.\n"); | |
| } | |
| } | |
| static int forcepae; | |
| static int __init forcepae_setup(char *__unused) | |
| { | |
| forcepae = 1; | |
| return 1; | |
| } | |
| __setup("forcepae", forcepae_setup); | |
| static void intel_workarounds(struct cpuinfo_x86 *c) | |
| { | |
| #ifdef CONFIG_X86_F00F_BUG | |
| /* | |
| * All models of Pentium and Pentium with MMX technology CPUs | |
| * have the F0 0F bug, which lets nonprivileged users lock up the | |
| * system. Announce that the fault handler will be checking for it. | |
| * The Quark is also family 5, but does not have the same bug. | |
| */ | |
| clear_cpu_bug(c, X86_BUG_F00F); | |
| if (c->x86 == 5 && c->x86_model < 9) { | |
| static int f00f_workaround_enabled; | |
| set_cpu_bug(c, X86_BUG_F00F); | |
| if (!f00f_workaround_enabled) { | |
| pr_notice("Intel Pentium with F0 0F bug - workaround enabled.\n"); | |
| f00f_workaround_enabled = 1; | |
| } | |
| } | |
| #endif | |
| /* | |
| * SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until | |
| * model 3 mask 3 | |
| */ | |
| if ((c->x86<<8 | c->x86_model<<4 | c->x86_stepping) < 0x633) | |
| clear_cpu_cap(c, X86_FEATURE_SEP); | |
| /* | |
| * PAE CPUID issue: many Pentium M report no PAE but may have a | |
| * functionally usable PAE implementation. | |
| * Forcefully enable PAE if kernel parameter "forcepae" is present. | |
| */ | |
| if (forcepae) { | |
| pr_warn("PAE forced!\n"); | |
| set_cpu_cap(c, X86_FEATURE_PAE); | |
| add_taint(TAINT_CPU_OUT_OF_SPEC, LOCKDEP_NOW_UNRELIABLE); | |
| } | |
| /* | |
| * P4 Xeon erratum 037 workaround. | |
| * Hardware prefetcher may cause stale data to be loaded into the cache. | |
| */ | |
| if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_stepping == 1)) { | |
| if (msr_set_bit(MSR_IA32_MISC_ENABLE, | |
| MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT) > 0) { | |
| pr_info("CPU: C0 stepping P4 Xeon detected.\n"); | |
| pr_info("CPU: Disabling hardware prefetching (Erratum 037)\n"); | |
| } | |
| } | |
| /* | |
| * See if we have a good local APIC by checking for buggy Pentia, | |
| * i.e. all B steppings and the C2 stepping of P54C when using their | |
| * integrated APIC (see 11AP erratum in "Pentium Processor | |
| * Specification Update"). | |
| */ | |
| if (boot_cpu_has(X86_FEATURE_APIC) && (c->x86<<8 | c->x86_model<<4) == 0x520 && | |
| (c->x86_stepping < 0x6 || c->x86_stepping == 0xb)) | |
| set_cpu_bug(c, X86_BUG_11AP); | |
| #ifdef CONFIG_X86_INTEL_USERCOPY | |
| /* | |
| * Set up the preferred alignment for movsl bulk memory moves | |
| */ | |
| switch (c->x86) { | |
| case 4: /* 486: untested */ | |
| break; | |
| case 5: /* Old Pentia: untested */ | |
| break; | |
| case 6: /* PII/PIII only like movsl with 8-byte alignment */ | |
| movsl_mask.mask = 7; | |
| break; | |
| case 15: /* P4 is OK down to 8-byte alignment */ | |
| movsl_mask.mask = 7; | |
| break; | |
| } | |
| #endif | |
| intel_smp_check(c); | |
| } | |
| #else | |
| static void intel_workarounds(struct cpuinfo_x86 *c) | |
| { | |
| } | |
| #endif | |
| static void srat_detect_node(struct cpuinfo_x86 *c) | |
| { | |
| #ifdef CONFIG_NUMA | |
| unsigned node; | |
| int cpu = smp_processor_id(); | |
| /* Don't do the funky fallback heuristics the AMD version employs | |
| for now. */ | |
| node = numa_cpu_node(cpu); | |
| if (node == NUMA_NO_NODE || !node_online(node)) { | |
| /* reuse the value from init_cpu_to_node() */ | |
| node = cpu_to_node(cpu); | |
| } | |
| numa_set_node(cpu, node); | |
| #endif | |
| } | |
| /* | |
| * find out the number of processor cores on the die | |
| */ | |
| static int intel_num_cpu_cores(struct cpuinfo_x86 *c) | |
| { | |
| unsigned int eax, ebx, ecx, edx; | |
| if (!IS_ENABLED(CONFIG_SMP) || c->cpuid_level < 4) | |
| return 1; | |
| /* Intel has a non-standard dependency on %ecx for this CPUID level. */ | |
| cpuid_count(4, 0, &eax, &ebx, &ecx, &edx); | |
| if (eax & 0x1f) | |
| return (eax >> 26) + 1; | |
| else | |
| return 1; | |
| } | |
| static void detect_vmx_virtcap(struct cpuinfo_x86 *c) | |
| { | |
| /* Intel VMX MSR indicated features */ | |
| #define X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW 0x00200000 | |
| #define X86_VMX_FEATURE_PROC_CTLS_VNMI 0x00400000 | |
| #define X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS 0x80000000 | |
| #define X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC 0x00000001 | |
| #define X86_VMX_FEATURE_PROC_CTLS2_EPT 0x00000002 | |
| #define X86_VMX_FEATURE_PROC_CTLS2_VPID 0x00000020 | |
| u32 vmx_msr_low, vmx_msr_high, msr_ctl, msr_ctl2; | |
| clear_cpu_cap(c, X86_FEATURE_TPR_SHADOW); | |
| clear_cpu_cap(c, X86_FEATURE_VNMI); | |
| clear_cpu_cap(c, X86_FEATURE_FLEXPRIORITY); | |
| clear_cpu_cap(c, X86_FEATURE_EPT); | |
| clear_cpu_cap(c, X86_FEATURE_VPID); | |
| rdmsr(MSR_IA32_VMX_PROCBASED_CTLS, vmx_msr_low, vmx_msr_high); | |
| msr_ctl = vmx_msr_high | vmx_msr_low; | |
| if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW) | |
| set_cpu_cap(c, X86_FEATURE_TPR_SHADOW); | |
| if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_VNMI) | |
| set_cpu_cap(c, X86_FEATURE_VNMI); | |
| if (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_2ND_CTLS) { | |
| rdmsr(MSR_IA32_VMX_PROCBASED_CTLS2, | |
| vmx_msr_low, vmx_msr_high); | |
| msr_ctl2 = vmx_msr_high | vmx_msr_low; | |
| if ((msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VIRT_APIC) && | |
| (msr_ctl & X86_VMX_FEATURE_PROC_CTLS_TPR_SHADOW)) | |
| set_cpu_cap(c, X86_FEATURE_FLEXPRIORITY); | |
| if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_EPT) | |
| set_cpu_cap(c, X86_FEATURE_EPT); | |
| if (msr_ctl2 & X86_VMX_FEATURE_PROC_CTLS2_VPID) | |
| set_cpu_cap(c, X86_FEATURE_VPID); | |
| } | |
| } | |
| static void init_intel_energy_perf(struct cpuinfo_x86 *c) | |
| { | |
| u64 epb; | |
| /* | |
| * Initialize MSR_IA32_ENERGY_PERF_BIAS if not already initialized. | |
| * (x86_energy_perf_policy(8) is available to change it at run-time.) | |
| */ | |
| if (!cpu_has(c, X86_FEATURE_EPB)) | |
| return; | |
| rdmsrl(MSR_IA32_ENERGY_PERF_BIAS, epb); | |
| if ((epb & 0xF) != ENERGY_PERF_BIAS_PERFORMANCE) | |
| return; | |
| pr_warn_once("ENERGY_PERF_BIAS: Set to 'normal', was 'performance'\n"); | |
| pr_warn_once("ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)\n"); | |
| epb = (epb & ~0xF) | ENERGY_PERF_BIAS_NORMAL; | |
| wrmsrl(MSR_IA32_ENERGY_PERF_BIAS, epb); | |
| } | |
| static void intel_bsp_resume(struct cpuinfo_x86 *c) | |
| { | |
| /* | |
| * MSR_IA32_ENERGY_PERF_BIAS is lost across suspend/resume, | |
| * so reinitialize it properly like during bootup: | |
| */ | |
| init_intel_energy_perf(c); | |
| } | |
| static void init_cpuid_fault(struct cpuinfo_x86 *c) | |
| { | |
| u64 msr; | |
| if (!rdmsrl_safe(MSR_PLATFORM_INFO, &msr)) { | |
| if (msr & MSR_PLATFORM_INFO_CPUID_FAULT) | |
| set_cpu_cap(c, X86_FEATURE_CPUID_FAULT); | |
| } | |
| } | |
| static void init_intel_misc_features(struct cpuinfo_x86 *c) | |
| { | |
| u64 msr; | |
| if (rdmsrl_safe(MSR_MISC_FEATURES_ENABLES, &msr)) | |
| return; | |
| /* Clear all MISC features */ | |
| this_cpu_write(msr_misc_features_shadow, 0); | |
| /* Check features and update capabilities and shadow control bits */ | |
| init_cpuid_fault(c); | |
| probe_xeon_phi_r3mwait(c); | |
| msr = this_cpu_read(msr_misc_features_shadow); | |
| wrmsrl(MSR_MISC_FEATURES_ENABLES, msr); | |
| } | |
| static void init_intel(struct cpuinfo_x86 *c) | |
| { | |
| unsigned int l2 = 0; | |
| early_init_intel(c); | |
| intel_workarounds(c); | |
| /* | |
| * Detect the extended topology information if available. This | |
| * will reinitialise the initial_apicid which will be used | |
| * in init_intel_cacheinfo() | |
| */ | |
| detect_extended_topology(c); | |
| if (!cpu_has(c, X86_FEATURE_XTOPOLOGY)) { | |
| /* | |
| * let's use the legacy cpuid vector 0x1 and 0x4 for topology | |
| * detection. | |
| */ | |
| c->x86_max_cores = intel_num_cpu_cores(c); | |
| #ifdef CONFIG_X86_32 | |
| detect_ht(c); | |
| #endif | |
| } | |
| l2 = init_intel_cacheinfo(c); | |
| /* Detect legacy cache sizes if init_intel_cacheinfo did not */ | |
| if (l2 == 0) { | |
| cpu_detect_cache_sizes(c); | |
| l2 = c->x86_cache_size; | |
| } | |
| if (c->cpuid_level > 9) { | |
| unsigned eax = cpuid_eax(10); | |
| /* Check for version and the number of counters */ | |
| if ((eax & 0xff) && (((eax>>8) & 0xff) > 1)) | |
| set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON); | |
| } | |
| if (cpu_has(c, X86_FEATURE_XMM2)) | |
| set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC); | |
| if (boot_cpu_has(X86_FEATURE_DS)) { | |
| unsigned int l1; | |
| rdmsr(MSR_IA32_MISC_ENABLE, l1, l2); | |
| if (!(l1 & (1<<11))) | |
| set_cpu_cap(c, X86_FEATURE_BTS); | |
| if (!(l1 & (1<<12))) | |
| set_cpu_cap(c, X86_FEATURE_PEBS); | |
| } | |
| if (c->x86 == 6 && boot_cpu_has(X86_FEATURE_CLFLUSH) && | |
| (c->x86_model == 29 || c->x86_model == 46 || c->x86_model == 47)) | |
| set_cpu_bug(c, X86_BUG_CLFLUSH_MONITOR); | |
| if (c->x86 == 6 && boot_cpu_has(X86_FEATURE_MWAIT) && | |
| ((c->x86_model == INTEL_FAM6_ATOM_GOLDMONT))) | |
| set_cpu_bug(c, X86_BUG_MONITOR); | |
| #ifdef CONFIG_X86_64 | |
| if (c->x86 == 15) | |
| c->x86_cache_alignment = c->x86_clflush_size * 2; | |
| if (c->x86 == 6) | |
| set_cpu_cap(c, X86_FEATURE_REP_GOOD); | |
| #else | |
| /* | |
| * Names for the Pentium II/Celeron processors | |
| * detectable only by also checking the cache size. | |
| * Dixon is NOT a Celeron. | |
| */ | |
| if (c->x86 == 6) { | |
| char *p = NULL; | |
| switch (c->x86_model) { | |
| case 5: | |
| if (l2 == 0) | |
| p = "Celeron (Covington)"; | |
| else if (l2 == 256) | |
| p = "Mobile Pentium II (Dixon)"; | |
| break; | |
| case 6: | |
| if (l2 == 128) | |
| p = "Celeron (Mendocino)"; | |
| else if (c->x86_stepping == 0 || c->x86_stepping == 5) | |
| p = "Celeron-A"; | |
| break; | |
| case 8: | |
| if (l2 == 128) | |
| p = "Celeron (Coppermine)"; | |
| break; | |
| } | |
| if (p) | |
| strcpy(c->x86_model_id, p); | |
| } | |
| if (c->x86 == 15) | |
| set_cpu_cap(c, X86_FEATURE_P4); | |
| if (c->x86 == 6) | |
| set_cpu_cap(c, X86_FEATURE_P3); | |
| #endif | |
| /* Work around errata */ | |
| srat_detect_node(c); | |
| if (cpu_has(c, X86_FEATURE_VMX)) | |
| detect_vmx_virtcap(c); | |
| init_intel_energy_perf(c); | |
| init_intel_misc_features(c); | |
| } | |
| #ifdef CONFIG_X86_32 | |
| static unsigned int intel_size_cache(struct cpuinfo_x86 *c, unsigned int size) | |
| { | |
| /* | |
| * Intel PIII Tualatin. This comes in two flavours. | |
| * One has 256kb of cache, the other 512. We have no way | |
| * to determine which, so we use a boottime override | |
| * for the 512kb model, and assume 256 otherwise. | |
| */ | |
| if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0)) | |
| size = 256; | |
| /* | |
| * Intel Quark SoC X1000 contains a 4-way set associative | |
| * 16K cache with a 16 byte cache line and 256 lines per tag | |
| */ | |
| if ((c->x86 == 5) && (c->x86_model == 9)) | |
| size = 16; | |
| return size; | |
| } | |
| #endif | |
| #define TLB_INST_4K 0x01 | |
| #define TLB_INST_4M 0x02 | |
| #define TLB_INST_2M_4M 0x03 | |
| #define TLB_INST_ALL 0x05 | |
| #define TLB_INST_1G 0x06 | |
| #define TLB_DATA_4K 0x11 | |
| #define TLB_DATA_4M 0x12 | |
| #define TLB_DATA_2M_4M 0x13 | |
| #define TLB_DATA_4K_4M 0x14 | |
| #define TLB_DATA_1G 0x16 | |
| #define TLB_DATA0_4K 0x21 | |
| #define TLB_DATA0_4M 0x22 | |
| #define TLB_DATA0_2M_4M 0x23 | |
| #define STLB_4K 0x41 | |
| #define STLB_4K_2M 0x42 | |
| static const struct _tlb_table intel_tlb_table[] = { | |
| { 0x01, TLB_INST_4K, 32, " TLB_INST 4 KByte pages, 4-way set associative" }, | |
| { 0x02, TLB_INST_4M, 2, " TLB_INST 4 MByte pages, full associative" }, | |
| { 0x03, TLB_DATA_4K, 64, " TLB_DATA 4 KByte pages, 4-way set associative" }, | |
| { 0x04, TLB_DATA_4M, 8, " TLB_DATA 4 MByte pages, 4-way set associative" }, | |
| { 0x05, TLB_DATA_4M, 32, " TLB_DATA 4 MByte pages, 4-way set associative" }, | |
| { 0x0b, TLB_INST_4M, 4, " TLB_INST 4 MByte pages, 4-way set associative" }, | |
| { 0x4f, TLB_INST_4K, 32, " TLB_INST 4 KByte pages */" }, | |
| { 0x50, TLB_INST_ALL, 64, " TLB_INST 4 KByte and 2-MByte or 4-MByte pages" }, | |
| { 0x51, TLB_INST_ALL, 128, " TLB_INST 4 KByte and 2-MByte or 4-MByte pages" }, | |
| { 0x52, TLB_INST_ALL, 256, " TLB_INST 4 KByte and 2-MByte or 4-MByte pages" }, | |
| { 0x55, TLB_INST_2M_4M, 7, " TLB_INST 2-MByte or 4-MByte pages, fully associative" }, | |
| { 0x56, TLB_DATA0_4M, 16, " TLB_DATA0 4 MByte pages, 4-way set associative" }, | |
| { 0x57, TLB_DATA0_4K, 16, " TLB_DATA0 4 KByte pages, 4-way associative" }, | |
| { 0x59, TLB_DATA0_4K, 16, " TLB_DATA0 4 KByte pages, fully associative" }, | |
| { 0x5a, TLB_DATA0_2M_4M, 32, " TLB_DATA0 2-MByte or 4 MByte pages, 4-way set associative" }, | |
| { 0x5b, TLB_DATA_4K_4M, 64, " TLB_DATA 4 KByte and 4 MByte pages" }, | |
| { 0x5c, TLB_DATA_4K_4M, 128, " TLB_DATA 4 KByte and 4 MByte pages" }, | |
| { 0x5d, TLB_DATA_4K_4M, 256, " TLB_DATA 4 KByte and 4 MByte pages" }, | |
| { 0x61, TLB_INST_4K, 48, " TLB_INST 4 KByte pages, full associative" }, | |
| { 0x63, TLB_DATA_1G, 4, " TLB_DATA 1 GByte pages, 4-way set associative" }, | |
| { 0x6b, TLB_DATA_4K, 256, " TLB_DATA 4 KByte pages, 8-way associative" }, | |
| { 0x6c, TLB_DATA_2M_4M, 128, " TLB_DATA 2 MByte or 4 MByte pages, 8-way associative" }, | |
| { 0x6d, TLB_DATA_1G, 16, " TLB_DATA 1 GByte pages, fully associative" }, | |
| { 0x76, TLB_INST_2M_4M, 8, " TLB_INST 2-MByte or 4-MByte pages, fully associative" }, | |
| { 0xb0, TLB_INST_4K, 128, " TLB_INST 4 KByte pages, 4-way set associative" }, | |
| { 0xb1, TLB_INST_2M_4M, 4, " TLB_INST 2M pages, 4-way, 8 entries or 4M pages, 4-way entries" }, | |
| { 0xb2, TLB_INST_4K, 64, " TLB_INST 4KByte pages, 4-way set associative" }, | |
| { 0xb3, TLB_DATA_4K, 128, " TLB_DATA 4 KByte pages, 4-way set associative" }, | |
| { 0xb4, TLB_DATA_4K, 256, " TLB_DATA 4 KByte pages, 4-way associative" }, | |
| { 0xb5, TLB_INST_4K, 64, " TLB_INST 4 KByte pages, 8-way set associative" }, | |
| { 0xb6, TLB_INST_4K, 128, " TLB_INST 4 KByte pages, 8-way set associative" }, | |
| { 0xba, TLB_DATA_4K, 64, " TLB_DATA 4 KByte pages, 4-way associative" }, | |
| { 0xc0, TLB_DATA_4K_4M, 8, " TLB_DATA 4 KByte and 4 MByte pages, 4-way associative" }, | |
| { 0xc1, STLB_4K_2M, 1024, " STLB 4 KByte and 2 MByte pages, 8-way associative" }, | |
| { 0xc2, TLB_DATA_2M_4M, 16, " DTLB 2 MByte/4MByte pages, 4-way associative" }, | |
| { 0xca, STLB_4K, 512, " STLB 4 KByte pages, 4-way associative" }, | |
| { 0x00, 0, 0 } | |
| }; | |
| static void intel_tlb_lookup(const unsigned char desc) | |
| { | |
| unsigned char k; | |
| if (desc == 0) | |
| return; | |
| /* look up this descriptor in the table */ | |
| for (k = 0; intel_tlb_table[k].descriptor != desc && \ | |
| intel_tlb_table[k].descriptor != 0; k++) | |
| ; | |
| if (intel_tlb_table[k].tlb_type == 0) | |
| return; | |
| switch (intel_tlb_table[k].tlb_type) { | |
| case STLB_4K: | |
| if (tlb_lli_4k[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_4k[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lld_4k[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_4k[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case STLB_4K_2M: | |
| if (tlb_lli_4k[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_4k[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lld_4k[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_4k[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lli_2m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_2m[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lld_2m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_2m[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lli_4m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_4m[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lld_4m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_4m[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case TLB_INST_ALL: | |
| if (tlb_lli_4k[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_4k[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lli_2m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_2m[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lli_4m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_4m[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case TLB_INST_4K: | |
| if (tlb_lli_4k[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_4k[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case TLB_INST_4M: | |
| if (tlb_lli_4m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_4m[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case TLB_INST_2M_4M: | |
| if (tlb_lli_2m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_2m[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lli_4m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lli_4m[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case TLB_DATA_4K: | |
| case TLB_DATA0_4K: | |
| if (tlb_lld_4k[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_4k[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case TLB_DATA_4M: | |
| case TLB_DATA0_4M: | |
| if (tlb_lld_4m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_4m[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case TLB_DATA_2M_4M: | |
| case TLB_DATA0_2M_4M: | |
| if (tlb_lld_2m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_2m[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lld_4m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_4m[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case TLB_DATA_4K_4M: | |
| if (tlb_lld_4k[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_4k[ENTRIES] = intel_tlb_table[k].entries; | |
| if (tlb_lld_4m[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_4m[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| case TLB_DATA_1G: | |
| if (tlb_lld_1g[ENTRIES] < intel_tlb_table[k].entries) | |
| tlb_lld_1g[ENTRIES] = intel_tlb_table[k].entries; | |
| break; | |
| } | |
| } | |
| static void intel_detect_tlb(struct cpuinfo_x86 *c) | |
| { | |
| int i, j, n; | |
| unsigned int regs[4]; | |
| unsigned char *desc = (unsigned char *)regs; | |
| if (c->cpuid_level < 2) | |
| return; | |
| /* Number of times to iterate */ | |
| n = cpuid_eax(2) & 0xFF; | |
| for (i = 0 ; i < n ; i++) { | |
| cpuid(2, ®s[0], ®s[1], ®s[2], ®s[3]); | |
| /* If bit 31 is set, this is an unknown format */ | |
| for (j = 0 ; j < 3 ; j++) | |
| if (regs[j] & (1 << 31)) | |
| regs[j] = 0; | |
| /* Byte 0 is level count, not a descriptor */ | |
| for (j = 1 ; j < 16 ; j++) | |
| intel_tlb_lookup(desc[j]); | |
| } | |
| } | |
| static const struct cpu_dev intel_cpu_dev = { | |
| .c_vendor = "Intel", | |
| .c_ident = { "GenuineIntel" }, | |
| #ifdef CONFIG_X86_32 | |
| .legacy_models = { | |
| { .family = 4, .model_names = | |
| { | |
| [0] = "486 DX-25/33", | |
| [1] = "486 DX-50", | |
| [2] = "486 SX", | |
| [3] = "486 DX/2", | |
| [4] = "486 SL", | |
| [5] = "486 SX/2", | |
| [7] = "486 DX/2-WB", | |
| [8] = "486 DX/4", | |
| [9] = "486 DX/4-WB" | |
| } | |
| }, | |
| { .family = 5, .model_names = | |
| { | |
| [0] = "Pentium 60/66 A-step", | |
| [1] = "Pentium 60/66", | |
| [2] = "Pentium 75 - 200", | |
| [3] = "OverDrive PODP5V83", | |
| [4] = "Pentium MMX", | |
| [7] = "Mobile Pentium 75 - 200", | |
| [8] = "Mobile Pentium MMX", | |
| [9] = "Quark SoC X1000", | |
| } | |
| }, | |
| { .family = 6, .model_names = | |
| { | |
| [0] = "Pentium Pro A-step", | |
| [1] = "Pentium Pro", | |
| [3] = "Pentium II (Klamath)", | |
| [4] = "Pentium II (Deschutes)", | |
| [5] = "Pentium II (Deschutes)", | |
| [6] = "Mobile Pentium II", | |
| [7] = "Pentium III (Katmai)", | |
| [8] = "Pentium III (Coppermine)", | |
| [10] = "Pentium III (Cascades)", | |
| [11] = "Pentium III (Tualatin)", | |
| } | |
| }, | |
| { .family = 15, .model_names = | |
| { | |
| [0] = "Pentium 4 (Unknown)", | |
| [1] = "Pentium 4 (Willamette)", | |
| [2] = "Pentium 4 (Northwood)", | |
| [4] = "Pentium 4 (Foster)", | |
| [5] = "Pentium 4 (Foster)", | |
| } | |
| }, | |
| }, | |
| .legacy_cache_size = intel_size_cache, | |
| #endif | |
| .c_detect_tlb = intel_detect_tlb, | |
| .c_early_init = early_init_intel, | |
| .c_init = init_intel, | |
| .c_bsp_resume = intel_bsp_resume, | |
| .c_x86_vendor = X86_VENDOR_INTEL, | |
| }; | |
| cpu_dev_register(intel_cpu_dev); | |