| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * MAX3420 Device Controller driver for USB. |
| * |
| * Author: Jaswinder Singh Brar <jaswinder.singh@linaro.org> |
| * (C) Copyright 2019-2020 Linaro Ltd |
| * |
| * Based on: |
| * o MAX3420E datasheet |
| * https://datasheets.maximintegrated.com/en/ds/MAX3420E.pdf |
| * o MAX342{0,1}E Programming Guides |
| * https://pdfserv.maximintegrated.com/en/an/AN3598.pdf |
| * https://pdfserv.maximintegrated.com/en/an/AN3785.pdf |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/bitfield.h> |
| #include <linux/of_address.h> |
| #include <linux/of_device.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_irq.h> |
| #include <linux/prefetch.h> |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/spi/spi.h> |
| #include <linux/gpio/consumer.h> |
| |
| #define MAX3420_MAX_EPS 4 |
| #define MAX3420_EP_MAX_PACKET 64 /* Same for all Endpoints */ |
| #define MAX3420_EPNAME_SIZE 16 /* Buffer size for endpoint name */ |
| |
| #define MAX3420_ACKSTAT BIT(0) |
| |
| #define MAX3420_SPI_DIR_RD 0 /* read register from MAX3420 */ |
| #define MAX3420_SPI_DIR_WR 1 /* write register to MAX3420 */ |
| |
| /* SPI commands: */ |
| #define MAX3420_SPI_DIR_SHIFT 1 |
| #define MAX3420_SPI_REG_SHIFT 3 |
| |
| #define MAX3420_REG_EP0FIFO 0 |
| #define MAX3420_REG_EP1FIFO 1 |
| #define MAX3420_REG_EP2FIFO 2 |
| #define MAX3420_REG_EP3FIFO 3 |
| #define MAX3420_REG_SUDFIFO 4 |
| #define MAX3420_REG_EP0BC 5 |
| #define MAX3420_REG_EP1BC 6 |
| #define MAX3420_REG_EP2BC 7 |
| #define MAX3420_REG_EP3BC 8 |
| |
| #define MAX3420_REG_EPSTALLS 9 |
| #define ACKSTAT BIT(6) |
| #define STLSTAT BIT(5) |
| #define STLEP3IN BIT(4) |
| #define STLEP2IN BIT(3) |
| #define STLEP1OUT BIT(2) |
| #define STLEP0OUT BIT(1) |
| #define STLEP0IN BIT(0) |
| |
| #define MAX3420_REG_CLRTOGS 10 |
| #define EP3DISAB BIT(7) |
| #define EP2DISAB BIT(6) |
| #define EP1DISAB BIT(5) |
| #define CTGEP3IN BIT(4) |
| #define CTGEP2IN BIT(3) |
| #define CTGEP1OUT BIT(2) |
| |
| #define MAX3420_REG_EPIRQ 11 |
| #define MAX3420_REG_EPIEN 12 |
| #define SUDAVIRQ BIT(5) |
| #define IN3BAVIRQ BIT(4) |
| #define IN2BAVIRQ BIT(3) |
| #define OUT1DAVIRQ BIT(2) |
| #define OUT0DAVIRQ BIT(1) |
| #define IN0BAVIRQ BIT(0) |
| |
| #define MAX3420_REG_USBIRQ 13 |
| #define MAX3420_REG_USBIEN 14 |
| #define OSCOKIRQ BIT(0) |
| #define RWUDNIRQ BIT(1) |
| #define BUSACTIRQ BIT(2) |
| #define URESIRQ BIT(3) |
| #define SUSPIRQ BIT(4) |
| #define NOVBUSIRQ BIT(5) |
| #define VBUSIRQ BIT(6) |
| #define URESDNIRQ BIT(7) |
| |
| #define MAX3420_REG_USBCTL 15 |
| #define HOSCSTEN BIT(7) |
| #define VBGATE BIT(6) |
| #define CHIPRES BIT(5) |
| #define PWRDOWN BIT(4) |
| #define CONNECT BIT(3) |
| #define SIGRWU BIT(2) |
| |
| #define MAX3420_REG_CPUCTL 16 |
| #define IE BIT(0) |
| |
| #define MAX3420_REG_PINCTL 17 |
| #define EP3INAK BIT(7) |
| #define EP2INAK BIT(6) |
| #define EP0INAK BIT(5) |
| #define FDUPSPI BIT(4) |
| #define INTLEVEL BIT(3) |
| #define POSINT BIT(2) |
| #define GPXB BIT(1) |
| #define GPXA BIT(0) |
| |
| #define MAX3420_REG_REVISION 18 |
| |
| #define MAX3420_REG_FNADDR 19 |
| #define FNADDR_MASK 0x7f |
| |
| #define MAX3420_REG_IOPINS 20 |
| #define MAX3420_REG_IOPINS2 21 |
| #define MAX3420_REG_GPINIRQ 22 |
| #define MAX3420_REG_GPINIEN 23 |
| #define MAX3420_REG_GPINPOL 24 |
| #define MAX3420_REG_HIRQ 25 |
| #define MAX3420_REG_HIEN 26 |
| #define MAX3420_REG_MODE 27 |
| #define MAX3420_REG_PERADDR 28 |
| #define MAX3420_REG_HCTL 29 |
| #define MAX3420_REG_HXFR 30 |
| #define MAX3420_REG_HRSL 31 |
| |
| #define ENABLE_IRQ BIT(0) |
| #define IOPIN_UPDATE BIT(1) |
| #define REMOTE_WAKEUP BIT(2) |
| #define CONNECT_HOST GENMASK(4, 3) |
| #define HCONNECT (1 << 3) |
| #define HDISCONNECT (3 << 3) |
| #define UDC_START GENMASK(6, 5) |
| #define START (1 << 5) |
| #define STOP (3 << 5) |
| #define ENABLE_EP GENMASK(8, 7) |
| #define ENABLE (1 << 7) |
| #define DISABLE (3 << 7) |
| #define STALL_EP GENMASK(10, 9) |
| #define STALL (1 << 9) |
| #define UNSTALL (3 << 9) |
| |
| #define MAX3420_CMD(c) FIELD_PREP(GENMASK(7, 3), c) |
| #define MAX3420_SPI_CMD_RD(c) (MAX3420_CMD(c) | (0 << 1)) |
| #define MAX3420_SPI_CMD_WR(c) (MAX3420_CMD(c) | (1 << 1)) |
| |
| struct max3420_req { |
| struct usb_request usb_req; |
| struct list_head queue; |
| struct max3420_ep *ep; |
| }; |
| |
| struct max3420_ep { |
| struct usb_ep ep_usb; |
| struct max3420_udc *udc; |
| struct list_head queue; |
| char name[MAX3420_EPNAME_SIZE]; |
| unsigned int maxpacket; |
| spinlock_t lock; |
| int halted; |
| u32 todo; |
| int id; |
| }; |
| |
| struct max3420_udc { |
| struct usb_gadget gadget; |
| struct max3420_ep ep[MAX3420_MAX_EPS]; |
| struct usb_gadget_driver *driver; |
| struct task_struct *thread_task; |
| int remote_wkp, is_selfpowered; |
| bool vbus_active, softconnect; |
| struct usb_ctrlrequest setup; |
| struct mutex spi_bus_mutex; |
| struct max3420_req ep0req; |
| struct spi_device *spi; |
| struct device *dev; |
| spinlock_t lock; |
| bool suspended; |
| u8 ep0buf[64]; |
| u32 todo; |
| }; |
| |
| #define to_max3420_req(r) container_of((r), struct max3420_req, usb_req) |
| #define to_max3420_ep(e) container_of((e), struct max3420_ep, ep_usb) |
| #define to_udc(g) container_of((g), struct max3420_udc, gadget) |
| |
| #define DRIVER_DESC "MAX3420 USB Device-Mode Driver" |
| static const char driver_name[] = "max3420-udc"; |
| |
| /* Control endpoint configuration.*/ |
| static const struct usb_endpoint_descriptor ep0_desc = { |
| .bEndpointAddress = USB_DIR_OUT, |
| .bmAttributes = USB_ENDPOINT_XFER_CONTROL, |
| .wMaxPacketSize = cpu_to_le16(MAX3420_EP_MAX_PACKET), |
| }; |
| |
| static void spi_ack_ctrl(struct max3420_udc *udc) |
| { |
| struct spi_device *spi = udc->spi; |
| struct spi_transfer transfer; |
| struct spi_message msg; |
| u8 txdata[1]; |
| |
| memset(&transfer, 0, sizeof(transfer)); |
| |
| spi_message_init(&msg); |
| |
| txdata[0] = MAX3420_ACKSTAT; |
| transfer.tx_buf = txdata; |
| transfer.len = 1; |
| |
| spi_message_add_tail(&transfer, &msg); |
| spi_sync(spi, &msg); |
| } |
| |
| static u8 spi_rd8_ack(struct max3420_udc *udc, u8 reg, int actstat) |
| { |
| struct spi_device *spi = udc->spi; |
| struct spi_transfer transfer; |
| struct spi_message msg; |
| u8 txdata[2], rxdata[2]; |
| |
| memset(&transfer, 0, sizeof(transfer)); |
| |
| spi_message_init(&msg); |
| |
| txdata[0] = MAX3420_SPI_CMD_RD(reg) | (actstat ? MAX3420_ACKSTAT : 0); |
| transfer.tx_buf = txdata; |
| transfer.rx_buf = rxdata; |
| transfer.len = 2; |
| |
| spi_message_add_tail(&transfer, &msg); |
| spi_sync(spi, &msg); |
| |
| return rxdata[1]; |
| } |
| |
| static u8 spi_rd8(struct max3420_udc *udc, u8 reg) |
| { |
| return spi_rd8_ack(udc, reg, 0); |
| } |
| |
| static void spi_wr8_ack(struct max3420_udc *udc, u8 reg, u8 val, int actstat) |
| { |
| struct spi_device *spi = udc->spi; |
| struct spi_transfer transfer; |
| struct spi_message msg; |
| u8 txdata[2]; |
| |
| memset(&transfer, 0, sizeof(transfer)); |
| |
| spi_message_init(&msg); |
| |
| txdata[0] = MAX3420_SPI_CMD_WR(reg) | (actstat ? MAX3420_ACKSTAT : 0); |
| txdata[1] = val; |
| |
| transfer.tx_buf = txdata; |
| transfer.len = 2; |
| |
| spi_message_add_tail(&transfer, &msg); |
| spi_sync(spi, &msg); |
| } |
| |
| static void spi_wr8(struct max3420_udc *udc, u8 reg, u8 val) |
| { |
| spi_wr8_ack(udc, reg, val, 0); |
| } |
| |
| static void spi_rd_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len) |
| { |
| struct spi_device *spi = udc->spi; |
| struct spi_transfer transfer; |
| struct spi_message msg; |
| u8 local_buf[MAX3420_EP_MAX_PACKET + 1] = {}; |
| |
| memset(&transfer, 0, sizeof(transfer)); |
| |
| spi_message_init(&msg); |
| |
| local_buf[0] = MAX3420_SPI_CMD_RD(reg); |
| transfer.tx_buf = &local_buf[0]; |
| transfer.rx_buf = &local_buf[0]; |
| transfer.len = len + 1; |
| |
| spi_message_add_tail(&transfer, &msg); |
| spi_sync(spi, &msg); |
| |
| memcpy(buf, &local_buf[1], len); |
| } |
| |
| static void spi_wr_buf(struct max3420_udc *udc, u8 reg, void *buf, u8 len) |
| { |
| struct spi_device *spi = udc->spi; |
| struct spi_transfer transfer; |
| struct spi_message msg; |
| u8 local_buf[MAX3420_EP_MAX_PACKET + 1] = {}; |
| |
| memset(&transfer, 0, sizeof(transfer)); |
| |
| spi_message_init(&msg); |
| |
| local_buf[0] = MAX3420_SPI_CMD_WR(reg); |
| memcpy(&local_buf[1], buf, len); |
| |
| transfer.tx_buf = local_buf; |
| transfer.len = len + 1; |
| |
| spi_message_add_tail(&transfer, &msg); |
| spi_sync(spi, &msg); |
| } |
| |
| static int spi_max3420_enable(struct max3420_ep *ep) |
| { |
| struct max3420_udc *udc = ep->udc; |
| unsigned long flags; |
| u8 epdis, epien; |
| int todo; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| todo = ep->todo & ENABLE_EP; |
| ep->todo &= ~ENABLE_EP; |
| spin_unlock_irqrestore(&ep->lock, flags); |
| |
| if (!todo || ep->id == 0) |
| return false; |
| |
| epien = spi_rd8(udc, MAX3420_REG_EPIEN); |
| epdis = spi_rd8(udc, MAX3420_REG_CLRTOGS); |
| |
| if (todo == ENABLE) { |
| epdis &= ~BIT(ep->id + 4); |
| epien |= BIT(ep->id + 1); |
| } else { |
| epdis |= BIT(ep->id + 4); |
| epien &= ~BIT(ep->id + 1); |
| } |
| |
| spi_wr8(udc, MAX3420_REG_CLRTOGS, epdis); |
| spi_wr8(udc, MAX3420_REG_EPIEN, epien); |
| |
| return true; |
| } |
| |
| static int spi_max3420_stall(struct max3420_ep *ep) |
| { |
| struct max3420_udc *udc = ep->udc; |
| unsigned long flags; |
| u8 epstalls; |
| int todo; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| todo = ep->todo & STALL_EP; |
| ep->todo &= ~STALL_EP; |
| spin_unlock_irqrestore(&ep->lock, flags); |
| |
| if (!todo || ep->id == 0) |
| return false; |
| |
| epstalls = spi_rd8(udc, MAX3420_REG_EPSTALLS); |
| if (todo == STALL) { |
| ep->halted = 1; |
| epstalls |= BIT(ep->id + 1); |
| } else { |
| u8 clrtogs; |
| |
| ep->halted = 0; |
| epstalls &= ~BIT(ep->id + 1); |
| clrtogs = spi_rd8(udc, MAX3420_REG_CLRTOGS); |
| clrtogs |= BIT(ep->id + 1); |
| spi_wr8(udc, MAX3420_REG_CLRTOGS, clrtogs); |
| } |
| spi_wr8(udc, MAX3420_REG_EPSTALLS, epstalls | ACKSTAT); |
| |
| return true; |
| } |
| |
| static int spi_max3420_rwkup(struct max3420_udc *udc) |
| { |
| unsigned long flags; |
| int wake_remote; |
| u8 usbctl; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| wake_remote = udc->todo & REMOTE_WAKEUP; |
| udc->todo &= ~REMOTE_WAKEUP; |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| if (!wake_remote || !udc->suspended) |
| return false; |
| |
| /* Set Remote-WkUp Signal*/ |
| usbctl = spi_rd8(udc, MAX3420_REG_USBCTL); |
| usbctl |= SIGRWU; |
| spi_wr8(udc, MAX3420_REG_USBCTL, usbctl); |
| |
| msleep_interruptible(5); |
| |
| /* Clear Remote-WkUp Signal*/ |
| usbctl = spi_rd8(udc, MAX3420_REG_USBCTL); |
| usbctl &= ~SIGRWU; |
| spi_wr8(udc, MAX3420_REG_USBCTL, usbctl); |
| |
| udc->suspended = false; |
| |
| return true; |
| } |
| |
| static void max3420_nuke(struct max3420_ep *ep, int status); |
| static void __max3420_stop(struct max3420_udc *udc) |
| { |
| u8 val; |
| int i; |
| |
| /* clear all pending requests */ |
| for (i = 1; i < MAX3420_MAX_EPS; i++) |
| max3420_nuke(&udc->ep[i], -ECONNRESET); |
| |
| /* Disable IRQ to CPU */ |
| spi_wr8(udc, MAX3420_REG_CPUCTL, 0); |
| |
| val = spi_rd8(udc, MAX3420_REG_USBCTL); |
| val |= PWRDOWN; |
| if (udc->is_selfpowered) |
| val &= ~HOSCSTEN; |
| else |
| val |= HOSCSTEN; |
| spi_wr8(udc, MAX3420_REG_USBCTL, val); |
| } |
| |
| static void __max3420_start(struct max3420_udc *udc) |
| { |
| u8 val; |
| |
| /* Need this delay if bus-powered, |
| * but even for self-powered it helps stability |
| */ |
| msleep_interruptible(250); |
| |
| /* configure SPI */ |
| spi_wr8(udc, MAX3420_REG_PINCTL, FDUPSPI); |
| |
| /* Chip Reset */ |
| spi_wr8(udc, MAX3420_REG_USBCTL, CHIPRES); |
| msleep_interruptible(5); |
| spi_wr8(udc, MAX3420_REG_USBCTL, 0); |
| |
| /* Poll for OSC to stabilize */ |
| while (1) { |
| val = spi_rd8(udc, MAX3420_REG_USBIRQ); |
| if (val & OSCOKIRQ) |
| break; |
| cond_resched(); |
| } |
| |
| /* Enable PULL-UP only when Vbus detected */ |
| val = spi_rd8(udc, MAX3420_REG_USBCTL); |
| val |= VBGATE | CONNECT; |
| spi_wr8(udc, MAX3420_REG_USBCTL, val); |
| |
| val = URESDNIRQ | URESIRQ; |
| if (udc->is_selfpowered) |
| val |= NOVBUSIRQ; |
| spi_wr8(udc, MAX3420_REG_USBIEN, val); |
| |
| /* Enable only EP0 interrupts */ |
| val = IN0BAVIRQ | OUT0DAVIRQ | SUDAVIRQ; |
| spi_wr8(udc, MAX3420_REG_EPIEN, val); |
| |
| /* Enable IRQ to CPU */ |
| spi_wr8(udc, MAX3420_REG_CPUCTL, IE); |
| } |
| |
| static int max3420_start(struct max3420_udc *udc) |
| { |
| unsigned long flags; |
| int todo; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| todo = udc->todo & UDC_START; |
| udc->todo &= ~UDC_START; |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| if (!todo) |
| return false; |
| |
| if (udc->vbus_active && udc->softconnect) |
| __max3420_start(udc); |
| else |
| __max3420_stop(udc); |
| |
| return true; |
| } |
| |
| static irqreturn_t max3420_vbus_handler(int irq, void *dev_id) |
| { |
| struct max3420_udc *udc = dev_id; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| /* its a vbus change interrupt */ |
| udc->vbus_active = !udc->vbus_active; |
| udc->todo |= UDC_START; |
| usb_udc_vbus_handler(&udc->gadget, udc->vbus_active); |
| usb_gadget_set_state(&udc->gadget, udc->vbus_active |
| ? USB_STATE_POWERED : USB_STATE_NOTATTACHED); |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| if (udc->thread_task) |
| wake_up_process(udc->thread_task); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t max3420_irq_handler(int irq, void *dev_id) |
| { |
| struct max3420_udc *udc = dev_id; |
| struct spi_device *spi = udc->spi; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| if ((udc->todo & ENABLE_IRQ) == 0) { |
| disable_irq_nosync(spi->irq); |
| udc->todo |= ENABLE_IRQ; |
| } |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| if (udc->thread_task) |
| wake_up_process(udc->thread_task); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void max3420_getstatus(struct max3420_udc *udc) |
| { |
| struct max3420_ep *ep; |
| u16 status = 0; |
| |
| switch (udc->setup.bRequestType & USB_RECIP_MASK) { |
| case USB_RECIP_DEVICE: |
| /* Get device status */ |
| status = udc->gadget.is_selfpowered << USB_DEVICE_SELF_POWERED; |
| status |= (udc->remote_wkp << USB_DEVICE_REMOTE_WAKEUP); |
| break; |
| case USB_RECIP_INTERFACE: |
| if (udc->driver->setup(&udc->gadget, &udc->setup) < 0) |
| goto stall; |
| break; |
| case USB_RECIP_ENDPOINT: |
| ep = &udc->ep[udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK]; |
| if (udc->setup.wIndex & USB_DIR_IN) { |
| if (!ep->ep_usb.caps.dir_in) |
| goto stall; |
| } else { |
| if (!ep->ep_usb.caps.dir_out) |
| goto stall; |
| } |
| if (ep->halted) |
| status = 1 << USB_ENDPOINT_HALT; |
| break; |
| default: |
| goto stall; |
| } |
| |
| status = cpu_to_le16(status); |
| spi_wr_buf(udc, MAX3420_REG_EP0FIFO, &status, 2); |
| spi_wr8_ack(udc, MAX3420_REG_EP0BC, 2, 1); |
| return; |
| stall: |
| dev_err(udc->dev, "Can't respond to getstatus request\n"); |
| spi_wr8(udc, MAX3420_REG_EPSTALLS, STLEP0IN | STLEP0OUT | STLSTAT); |
| } |
| |
| static void max3420_set_clear_feature(struct max3420_udc *udc) |
| { |
| struct max3420_ep *ep; |
| int set = udc->setup.bRequest == USB_REQ_SET_FEATURE; |
| unsigned long flags; |
| int id; |
| |
| switch (udc->setup.bRequestType) { |
| case USB_RECIP_DEVICE: |
| if (udc->setup.wValue != USB_DEVICE_REMOTE_WAKEUP) |
| break; |
| |
| if (udc->setup.bRequest == USB_REQ_SET_FEATURE) |
| udc->remote_wkp = 1; |
| else |
| udc->remote_wkp = 0; |
| |
| return spi_ack_ctrl(udc); |
| |
| case USB_RECIP_ENDPOINT: |
| if (udc->setup.wValue != USB_ENDPOINT_HALT) |
| break; |
| |
| id = udc->setup.wIndex & USB_ENDPOINT_NUMBER_MASK; |
| ep = &udc->ep[id]; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| ep->todo &= ~STALL_EP; |
| if (set) |
| ep->todo |= STALL; |
| else |
| ep->todo |= UNSTALL; |
| spin_unlock_irqrestore(&ep->lock, flags); |
| |
| spi_max3420_stall(ep); |
| return; |
| default: |
| break; |
| } |
| |
| dev_err(udc->dev, "Can't respond to SET/CLEAR FEATURE\n"); |
| spi_wr8(udc, MAX3420_REG_EPSTALLS, STLEP0IN | STLEP0OUT | STLSTAT); |
| } |
| |
| static void max3420_handle_setup(struct max3420_udc *udc) |
| { |
| struct usb_ctrlrequest setup; |
| |
| spi_rd_buf(udc, MAX3420_REG_SUDFIFO, (void *)&setup, 8); |
| |
| udc->setup = setup; |
| udc->setup.wValue = cpu_to_le16(setup.wValue); |
| udc->setup.wIndex = cpu_to_le16(setup.wIndex); |
| udc->setup.wLength = cpu_to_le16(setup.wLength); |
| |
| switch (udc->setup.bRequest) { |
| case USB_REQ_GET_STATUS: |
| /* Data+Status phase form udc */ |
| if ((udc->setup.bRequestType & |
| (USB_DIR_IN | USB_TYPE_MASK)) != |
| (USB_DIR_IN | USB_TYPE_STANDARD)) { |
| break; |
| } |
| return max3420_getstatus(udc); |
| case USB_REQ_SET_ADDRESS: |
| /* Status phase from udc */ |
| if (udc->setup.bRequestType != (USB_DIR_OUT | |
| USB_TYPE_STANDARD | USB_RECIP_DEVICE)) { |
| break; |
| } |
| spi_rd8_ack(udc, MAX3420_REG_FNADDR, 1); |
| dev_dbg(udc->dev, "Assigned Address=%d\n", udc->setup.wValue); |
| return; |
| case USB_REQ_CLEAR_FEATURE: |
| case USB_REQ_SET_FEATURE: |
| /* Requests with no data phase, status phase from udc */ |
| if ((udc->setup.bRequestType & USB_TYPE_MASK) |
| != USB_TYPE_STANDARD) |
| break; |
| return max3420_set_clear_feature(udc); |
| default: |
| break; |
| } |
| |
| if (udc->driver->setup(&udc->gadget, &setup) < 0) { |
| /* Stall EP0 */ |
| spi_wr8(udc, MAX3420_REG_EPSTALLS, |
| STLEP0IN | STLEP0OUT | STLSTAT); |
| } |
| } |
| |
| static void max3420_req_done(struct max3420_req *req, int status) |
| { |
| struct max3420_ep *ep = req->ep; |
| struct max3420_udc *udc = ep->udc; |
| |
| if (req->usb_req.status == -EINPROGRESS) |
| req->usb_req.status = status; |
| else |
| status = req->usb_req.status; |
| |
| if (status && status != -ESHUTDOWN) |
| dev_err(udc->dev, "%s done %p, status %d\n", |
| ep->ep_usb.name, req, status); |
| |
| if (req->usb_req.complete) |
| req->usb_req.complete(&ep->ep_usb, &req->usb_req); |
| } |
| |
| static int max3420_do_data(struct max3420_udc *udc, int ep_id, int in) |
| { |
| struct max3420_ep *ep = &udc->ep[ep_id]; |
| struct max3420_req *req; |
| int done, length, psz; |
| void *buf; |
| |
| if (list_empty(&ep->queue)) |
| return false; |
| |
| req = list_first_entry(&ep->queue, struct max3420_req, queue); |
| buf = req->usb_req.buf + req->usb_req.actual; |
| |
| psz = ep->ep_usb.maxpacket; |
| length = req->usb_req.length - req->usb_req.actual; |
| length = min(length, psz); |
| |
| if (length == 0) { |
| done = 1; |
| goto xfer_done; |
| } |
| |
| done = 0; |
| if (in) { |
| prefetch(buf); |
| spi_wr_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length); |
| spi_wr8(udc, MAX3420_REG_EP0BC + ep_id, length); |
| if (length < psz) |
| done = 1; |
| } else { |
| psz = spi_rd8(udc, MAX3420_REG_EP0BC + ep_id); |
| length = min(length, psz); |
| prefetchw(buf); |
| spi_rd_buf(udc, MAX3420_REG_EP0FIFO + ep_id, buf, length); |
| if (length < ep->ep_usb.maxpacket) |
| done = 1; |
| } |
| |
| req->usb_req.actual += length; |
| |
| if (req->usb_req.actual == req->usb_req.length) |
| done = 1; |
| |
| xfer_done: |
| if (done) { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| list_del_init(&req->queue); |
| spin_unlock_irqrestore(&ep->lock, flags); |
| |
| if (ep_id == 0) |
| spi_ack_ctrl(udc); |
| |
| max3420_req_done(req, 0); |
| } |
| |
| return true; |
| } |
| |
| static int max3420_handle_irqs(struct max3420_udc *udc) |
| { |
| u8 epien, epirq, usbirq, usbien, reg[4]; |
| bool ret = false; |
| |
| spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 4); |
| epirq = reg[0]; |
| epien = reg[1]; |
| usbirq = reg[2]; |
| usbien = reg[3]; |
| |
| usbirq &= usbien; |
| epirq &= epien; |
| |
| if (epirq & SUDAVIRQ) { |
| spi_wr8(udc, MAX3420_REG_EPIRQ, SUDAVIRQ); |
| max3420_handle_setup(udc); |
| return true; |
| } |
| |
| if (usbirq & VBUSIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, VBUSIRQ); |
| dev_dbg(udc->dev, "Cable plugged in\n"); |
| return true; |
| } |
| |
| if (usbirq & NOVBUSIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, NOVBUSIRQ); |
| dev_dbg(udc->dev, "Cable pulled out\n"); |
| return true; |
| } |
| |
| if (usbirq & URESIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, URESIRQ); |
| dev_dbg(udc->dev, "USB Reset - Start\n"); |
| return true; |
| } |
| |
| if (usbirq & URESDNIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, URESDNIRQ); |
| dev_dbg(udc->dev, "USB Reset - END\n"); |
| spi_wr8(udc, MAX3420_REG_USBIEN, URESDNIRQ | URESIRQ); |
| spi_wr8(udc, MAX3420_REG_EPIEN, SUDAVIRQ | IN0BAVIRQ |
| | OUT0DAVIRQ); |
| return true; |
| } |
| |
| if (usbirq & SUSPIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, SUSPIRQ); |
| dev_dbg(udc->dev, "USB Suspend - Enter\n"); |
| udc->suspended = true; |
| return true; |
| } |
| |
| if (usbirq & BUSACTIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, BUSACTIRQ); |
| dev_dbg(udc->dev, "USB Suspend - Exit\n"); |
| udc->suspended = false; |
| return true; |
| } |
| |
| if (usbirq & RWUDNIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, RWUDNIRQ); |
| dev_dbg(udc->dev, "Asked Host to wakeup\n"); |
| return true; |
| } |
| |
| if (usbirq & OSCOKIRQ) { |
| spi_wr8(udc, MAX3420_REG_USBIRQ, OSCOKIRQ); |
| dev_dbg(udc->dev, "Osc stabilized, start work\n"); |
| return true; |
| } |
| |
| if (epirq & OUT0DAVIRQ && max3420_do_data(udc, 0, 0)) { |
| spi_wr8_ack(udc, MAX3420_REG_EPIRQ, OUT0DAVIRQ, 1); |
| ret = true; |
| } |
| |
| if (epirq & IN0BAVIRQ && max3420_do_data(udc, 0, 1)) |
| ret = true; |
| |
| if (epirq & OUT1DAVIRQ && max3420_do_data(udc, 1, 0)) { |
| spi_wr8_ack(udc, MAX3420_REG_EPIRQ, OUT1DAVIRQ, 1); |
| ret = true; |
| } |
| |
| if (epirq & IN2BAVIRQ && max3420_do_data(udc, 2, 1)) |
| ret = true; |
| |
| if (epirq & IN3BAVIRQ && max3420_do_data(udc, 3, 1)) |
| ret = true; |
| |
| return ret; |
| } |
| |
| static int max3420_thread(void *dev_id) |
| { |
| struct max3420_udc *udc = dev_id; |
| struct spi_device *spi = udc->spi; |
| int i, loop_again = 1; |
| unsigned long flags; |
| |
| while (!kthread_should_stop()) { |
| if (!loop_again) { |
| ktime_t kt = ns_to_ktime(1000 * 1000 * 250); /* 250ms */ |
| |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| if (udc->todo & ENABLE_IRQ) { |
| enable_irq(spi->irq); |
| udc->todo &= ~ENABLE_IRQ; |
| } |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| schedule_hrtimeout(&kt, HRTIMER_MODE_REL); |
| } |
| loop_again = 0; |
| |
| mutex_lock(&udc->spi_bus_mutex); |
| |
| /* If bus-vbus_active and disconnected */ |
| if (!udc->vbus_active || !udc->softconnect) |
| goto loop; |
| |
| if (max3420_start(udc)) { |
| loop_again = 1; |
| goto loop; |
| } |
| |
| if (max3420_handle_irqs(udc)) { |
| loop_again = 1; |
| goto loop; |
| } |
| |
| if (spi_max3420_rwkup(udc)) { |
| loop_again = 1; |
| goto loop; |
| } |
| |
| max3420_do_data(udc, 0, 1); /* get done with the EP0 ZLP */ |
| |
| for (i = 1; i < MAX3420_MAX_EPS; i++) { |
| struct max3420_ep *ep = &udc->ep[i]; |
| |
| if (spi_max3420_enable(ep)) |
| loop_again = 1; |
| if (spi_max3420_stall(ep)) |
| loop_again = 1; |
| } |
| loop: |
| mutex_unlock(&udc->spi_bus_mutex); |
| } |
| |
| set_current_state(TASK_RUNNING); |
| dev_info(udc->dev, "SPI thread exiting\n"); |
| return 0; |
| } |
| |
| static int max3420_ep_set_halt(struct usb_ep *_ep, int stall) |
| { |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| struct max3420_udc *udc = ep->udc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| |
| ep->todo &= ~STALL_EP; |
| if (stall) |
| ep->todo |= STALL; |
| else |
| ep->todo |= UNSTALL; |
| |
| spin_unlock_irqrestore(&ep->lock, flags); |
| |
| wake_up_process(udc->thread_task); |
| |
| dev_dbg(udc->dev, "%sStall %s\n", stall ? "" : "Un", ep->name); |
| return 0; |
| } |
| |
| static int __max3420_ep_enable(struct max3420_ep *ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| unsigned int maxp = usb_endpoint_maxp(desc); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| ep->ep_usb.desc = desc; |
| ep->ep_usb.maxpacket = maxp; |
| |
| ep->todo &= ~ENABLE_EP; |
| ep->todo |= ENABLE; |
| spin_unlock_irqrestore(&ep->lock, flags); |
| |
| return 0; |
| } |
| |
| static int max3420_ep_enable(struct usb_ep *_ep, |
| const struct usb_endpoint_descriptor *desc) |
| { |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| struct max3420_udc *udc = ep->udc; |
| |
| __max3420_ep_enable(ep, desc); |
| |
| wake_up_process(udc->thread_task); |
| |
| return 0; |
| } |
| |
| static void max3420_nuke(struct max3420_ep *ep, int status) |
| { |
| struct max3420_req *req, *r; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| |
| list_for_each_entry_safe(req, r, &ep->queue, queue) { |
| list_del_init(&req->queue); |
| |
| spin_unlock_irqrestore(&ep->lock, flags); |
| max3420_req_done(req, status); |
| spin_lock_irqsave(&ep->lock, flags); |
| } |
| |
| spin_unlock_irqrestore(&ep->lock, flags); |
| } |
| |
| static void __max3420_ep_disable(struct max3420_ep *ep) |
| { |
| struct max3420_udc *udc = ep->udc; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| |
| ep->ep_usb.desc = NULL; |
| |
| ep->todo &= ~ENABLE_EP; |
| ep->todo |= DISABLE; |
| |
| spin_unlock_irqrestore(&ep->lock, flags); |
| |
| dev_dbg(udc->dev, "Disabled %s\n", ep->name); |
| } |
| |
| static int max3420_ep_disable(struct usb_ep *_ep) |
| { |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| struct max3420_udc *udc = ep->udc; |
| |
| max3420_nuke(ep, -ESHUTDOWN); |
| |
| __max3420_ep_disable(ep); |
| |
| wake_up_process(udc->thread_task); |
| |
| return 0; |
| } |
| |
| static struct usb_request *max3420_alloc_request(struct usb_ep *_ep, |
| gfp_t gfp_flags) |
| { |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| struct max3420_req *req; |
| |
| req = kzalloc(sizeof(*req), gfp_flags); |
| if (!req) |
| return NULL; |
| |
| req->ep = ep; |
| |
| return &req->usb_req; |
| } |
| |
| static void max3420_free_request(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| kfree(to_max3420_req(_req)); |
| } |
| |
| static int max3420_ep_queue(struct usb_ep *_ep, struct usb_request *_req, |
| gfp_t ignored) |
| { |
| struct max3420_req *req = to_max3420_req(_req); |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| struct max3420_udc *udc = ep->udc; |
| unsigned long flags; |
| |
| _req->status = -EINPROGRESS; |
| _req->actual = 0; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| list_add_tail(&req->queue, &ep->queue); |
| spin_unlock_irqrestore(&ep->lock, flags); |
| |
| wake_up_process(udc->thread_task); |
| return 0; |
| } |
| |
| static int max3420_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) |
| { |
| struct max3420_req *t, *req = to_max3420_req(_req); |
| struct max3420_ep *ep = to_max3420_ep(_ep); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ep->lock, flags); |
| |
| /* Pluck the descriptor from queue */ |
| list_for_each_entry(t, &ep->queue, queue) |
| if (t == req) { |
| list_del_init(&req->queue); |
| break; |
| } |
| |
| spin_unlock_irqrestore(&ep->lock, flags); |
| |
| if (t == req) |
| max3420_req_done(req, -ECONNRESET); |
| |
| return 0; |
| } |
| |
| static const struct usb_ep_ops max3420_ep_ops = { |
| .enable = max3420_ep_enable, |
| .disable = max3420_ep_disable, |
| .alloc_request = max3420_alloc_request, |
| .free_request = max3420_free_request, |
| .queue = max3420_ep_queue, |
| .dequeue = max3420_ep_dequeue, |
| .set_halt = max3420_ep_set_halt, |
| }; |
| |
| static int max3420_wakeup(struct usb_gadget *gadget) |
| { |
| struct max3420_udc *udc = to_udc(gadget); |
| unsigned long flags; |
| int ret = -EINVAL; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| /* Only if wakeup allowed by host */ |
| if (udc->remote_wkp) { |
| udc->todo |= REMOTE_WAKEUP; |
| ret = 0; |
| } |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| if (udc->thread_task) |
| wake_up_process(udc->thread_task); |
| return ret; |
| } |
| |
| static int max3420_udc_start(struct usb_gadget *gadget, |
| struct usb_gadget_driver *driver) |
| { |
| struct max3420_udc *udc = to_udc(gadget); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| /* hook up the driver */ |
| driver->driver.bus = NULL; |
| udc->driver = driver; |
| udc->gadget.speed = USB_SPEED_FULL; |
| |
| udc->gadget.is_selfpowered = udc->is_selfpowered; |
| udc->remote_wkp = 0; |
| udc->softconnect = true; |
| udc->todo |= UDC_START; |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| if (udc->thread_task) |
| wake_up_process(udc->thread_task); |
| |
| return 0; |
| } |
| |
| static int max3420_udc_stop(struct usb_gadget *gadget) |
| { |
| struct max3420_udc *udc = to_udc(gadget); |
| unsigned long flags; |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| udc->is_selfpowered = udc->gadget.is_selfpowered; |
| udc->gadget.speed = USB_SPEED_UNKNOWN; |
| udc->driver = NULL; |
| udc->softconnect = false; |
| udc->todo |= UDC_START; |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| if (udc->thread_task) |
| wake_up_process(udc->thread_task); |
| |
| return 0; |
| } |
| |
| static const struct usb_gadget_ops max3420_udc_ops = { |
| .udc_start = max3420_udc_start, |
| .udc_stop = max3420_udc_stop, |
| .wakeup = max3420_wakeup, |
| }; |
| |
| static void max3420_eps_init(struct max3420_udc *udc) |
| { |
| int idx; |
| |
| INIT_LIST_HEAD(&udc->gadget.ep_list); |
| |
| for (idx = 0; idx < MAX3420_MAX_EPS; idx++) { |
| struct max3420_ep *ep = &udc->ep[idx]; |
| |
| spin_lock_init(&ep->lock); |
| INIT_LIST_HEAD(&ep->queue); |
| |
| ep->udc = udc; |
| ep->id = idx; |
| ep->halted = 0; |
| ep->maxpacket = 0; |
| ep->ep_usb.name = ep->name; |
| ep->ep_usb.ops = &max3420_ep_ops; |
| usb_ep_set_maxpacket_limit(&ep->ep_usb, MAX3420_EP_MAX_PACKET); |
| |
| if (idx == 0) { /* For EP0 */ |
| ep->ep_usb.desc = &ep0_desc; |
| ep->ep_usb.maxpacket = usb_endpoint_maxp(&ep0_desc); |
| ep->ep_usb.caps.type_control = true; |
| ep->ep_usb.caps.dir_in = true; |
| ep->ep_usb.caps.dir_out = true; |
| snprintf(ep->name, MAX3420_EPNAME_SIZE, "ep0"); |
| continue; |
| } |
| |
| if (idx == 1) { /* EP1 is OUT */ |
| ep->ep_usb.caps.dir_in = false; |
| ep->ep_usb.caps.dir_out = true; |
| snprintf(ep->name, MAX3420_EPNAME_SIZE, "ep1-bulk-out"); |
| } else { /* EP2 & EP3 are IN */ |
| ep->ep_usb.caps.dir_in = true; |
| ep->ep_usb.caps.dir_out = false; |
| snprintf(ep->name, MAX3420_EPNAME_SIZE, |
| "ep%d-bulk-in", idx); |
| } |
| ep->ep_usb.caps.type_iso = false; |
| ep->ep_usb.caps.type_int = false; |
| ep->ep_usb.caps.type_bulk = true; |
| |
| list_add_tail(&ep->ep_usb.ep_list, |
| &udc->gadget.ep_list); |
| } |
| } |
| |
| static int max3420_probe(struct spi_device *spi) |
| { |
| struct max3420_udc *udc; |
| int err, irq; |
| u8 reg[8]; |
| |
| if (spi->master->flags & SPI_MASTER_HALF_DUPLEX) { |
| dev_err(&spi->dev, "UDC needs full duplex to work\n"); |
| return -EINVAL; |
| } |
| |
| spi->mode = SPI_MODE_3; |
| spi->bits_per_word = 8; |
| |
| err = spi_setup(spi); |
| if (err) { |
| dev_err(&spi->dev, "Unable to setup SPI bus\n"); |
| return -EFAULT; |
| } |
| |
| udc = devm_kzalloc(&spi->dev, sizeof(*udc), GFP_KERNEL); |
| if (!udc) |
| return -ENOMEM; |
| |
| udc->spi = spi; |
| |
| udc->remote_wkp = 0; |
| |
| /* Setup gadget structure */ |
| udc->gadget.ops = &max3420_udc_ops; |
| udc->gadget.max_speed = USB_SPEED_FULL; |
| udc->gadget.speed = USB_SPEED_UNKNOWN; |
| udc->gadget.ep0 = &udc->ep[0].ep_usb; |
| udc->gadget.name = driver_name; |
| |
| spin_lock_init(&udc->lock); |
| mutex_init(&udc->spi_bus_mutex); |
| |
| udc->ep0req.ep = &udc->ep[0]; |
| udc->ep0req.usb_req.buf = udc->ep0buf; |
| INIT_LIST_HEAD(&udc->ep0req.queue); |
| |
| /* setup Endpoints */ |
| max3420_eps_init(udc); |
| |
| /* configure SPI */ |
| spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8); |
| spi_wr8(udc, MAX3420_REG_PINCTL, FDUPSPI); |
| |
| err = usb_add_gadget_udc(&spi->dev, &udc->gadget); |
| if (err) |
| return err; |
| |
| udc->dev = &udc->gadget.dev; |
| |
| spi_set_drvdata(spi, udc); |
| |
| irq = of_irq_get_byname(spi->dev.of_node, "udc"); |
| err = devm_request_irq(&spi->dev, irq, max3420_irq_handler, 0, |
| "max3420", udc); |
| if (err < 0) |
| goto del_gadget; |
| |
| udc->thread_task = kthread_create(max3420_thread, udc, |
| "max3420-thread"); |
| if (IS_ERR(udc->thread_task)) { |
| err = PTR_ERR(udc->thread_task); |
| goto del_gadget; |
| } |
| |
| irq = of_irq_get_byname(spi->dev.of_node, "vbus"); |
| if (irq <= 0) { /* no vbus irq implies self-powered design */ |
| udc->is_selfpowered = 1; |
| udc->vbus_active = true; |
| udc->todo |= UDC_START; |
| usb_udc_vbus_handler(&udc->gadget, udc->vbus_active); |
| usb_gadget_set_state(&udc->gadget, USB_STATE_POWERED); |
| max3420_start(udc); |
| } else { |
| udc->is_selfpowered = 0; |
| /* Detect current vbus status */ |
| spi_rd_buf(udc, MAX3420_REG_EPIRQ, reg, 8); |
| if (reg[7] != 0xff) |
| udc->vbus_active = true; |
| |
| err = devm_request_irq(&spi->dev, irq, |
| max3420_vbus_handler, 0, "vbus", udc); |
| if (err < 0) |
| goto del_gadget; |
| } |
| |
| return 0; |
| |
| del_gadget: |
| usb_del_gadget_udc(&udc->gadget); |
| return err; |
| } |
| |
| static int max3420_remove(struct spi_device *spi) |
| { |
| struct max3420_udc *udc = spi_get_drvdata(spi); |
| unsigned long flags; |
| |
| usb_del_gadget_udc(&udc->gadget); |
| |
| spin_lock_irqsave(&udc->lock, flags); |
| |
| kthread_stop(udc->thread_task); |
| |
| spin_unlock_irqrestore(&udc->lock, flags); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id max3420_udc_of_match[] = { |
| { .compatible = "maxim,max3420-udc"}, |
| { .compatible = "maxim,max3421-udc"}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, max3420_udc_of_match); |
| |
| static struct spi_driver max3420_driver = { |
| .driver = { |
| .name = "max3420-udc", |
| .of_match_table = of_match_ptr(max3420_udc_of_match), |
| }, |
| .probe = max3420_probe, |
| .remove = max3420_remove, |
| }; |
| |
| module_spi_driver(max3420_driver); |
| |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_AUTHOR("Jassi Brar <jaswinder.singh@linaro.org>"); |
| MODULE_LICENSE("GPL"); |