| /* |
| * This is the Fusion MPT base driver providing common API layer interface |
| * for access to MPT (Message Passing Technology) firmware. |
| * |
| * This code is based on drivers/scsi/mpt3sas/mpt3sas_base.c |
| * Copyright (C) 2012-2014 LSI Corporation |
| * Copyright (C) 2013-2014 Avago Technologies |
| * (mailto: MPT-FusionLinux.pdl@avagotech.com) |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * NO WARRANTY |
| * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR |
| * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT |
| * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT, |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is |
| * solely responsible for determining the appropriateness of using and |
| * distributing the Program and assumes all risks associated with its |
| * exercise of rights under this Agreement, including but not limited to |
| * the risks and costs of program errors, damage to or loss of data, |
| * programs or equipment, and unavailability or interruption of operations. |
| |
| * DISCLAIMER OF LIABILITY |
| * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR |
| * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE |
| * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED |
| * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES |
| |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, |
| * USA. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kdev_t.h> |
| #include <linux/blkdev.h> |
| #include <linux/delay.h> |
| #include <linux/interrupt.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/io.h> |
| #include <linux/time.h> |
| #include <linux/ktime.h> |
| #include <linux/kthread.h> |
| #include <asm/page.h> /* To get host page size per arch */ |
| #include <linux/aer.h> |
| |
| |
| #include "mpt3sas_base.h" |
| |
| static MPT_CALLBACK mpt_callbacks[MPT_MAX_CALLBACKS]; |
| |
| |
| #define FAULT_POLLING_INTERVAL 1000 /* in milliseconds */ |
| |
| /* maximum controller queue depth */ |
| #define MAX_HBA_QUEUE_DEPTH 30000 |
| #define MAX_CHAIN_DEPTH 100000 |
| static int max_queue_depth = -1; |
| module_param(max_queue_depth, int, 0444); |
| MODULE_PARM_DESC(max_queue_depth, " max controller queue depth "); |
| |
| static int max_sgl_entries = -1; |
| module_param(max_sgl_entries, int, 0444); |
| MODULE_PARM_DESC(max_sgl_entries, " max sg entries "); |
| |
| static int msix_disable = -1; |
| module_param(msix_disable, int, 0444); |
| MODULE_PARM_DESC(msix_disable, " disable msix routed interrupts (default=0)"); |
| |
| static int smp_affinity_enable = 1; |
| module_param(smp_affinity_enable, int, 0444); |
| MODULE_PARM_DESC(smp_affinity_enable, "SMP affinity feature enable/disable Default: enable(1)"); |
| |
| static int max_msix_vectors = -1; |
| module_param(max_msix_vectors, int, 0444); |
| MODULE_PARM_DESC(max_msix_vectors, |
| " max msix vectors"); |
| |
| static int irqpoll_weight = -1; |
| module_param(irqpoll_weight, int, 0444); |
| MODULE_PARM_DESC(irqpoll_weight, |
| "irq poll weight (default= one fourth of HBA queue depth)"); |
| |
| static int mpt3sas_fwfault_debug; |
| MODULE_PARM_DESC(mpt3sas_fwfault_debug, |
| " enable detection of firmware fault and halt firmware - (default=0)"); |
| |
| static int perf_mode = -1; |
| module_param(perf_mode, int, 0444); |
| MODULE_PARM_DESC(perf_mode, |
| "Performance mode (only for Aero/Sea Generation), options:\n\t\t" |
| "0 - balanced: high iops mode is enabled &\n\t\t" |
| "interrupt coalescing is enabled only on high iops queues,\n\t\t" |
| "1 - iops: high iops mode is disabled &\n\t\t" |
| "interrupt coalescing is enabled on all queues,\n\t\t" |
| "2 - latency: high iops mode is disabled &\n\t\t" |
| "interrupt coalescing is enabled on all queues with timeout value 0xA,\n" |
| "\t\tdefault - default perf_mode is 'balanced'" |
| ); |
| |
| enum mpt3sas_perf_mode { |
| MPT_PERF_MODE_DEFAULT = -1, |
| MPT_PERF_MODE_BALANCED = 0, |
| MPT_PERF_MODE_IOPS = 1, |
| MPT_PERF_MODE_LATENCY = 2, |
| }; |
| |
| static int |
| _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, |
| u32 ioc_state, int timeout); |
| static int |
| _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc); |
| static void |
| _base_clear_outstanding_commands(struct MPT3SAS_ADAPTER *ioc); |
| |
| /** |
| * mpt3sas_base_check_cmd_timeout - Function |
| * to check timeout and command termination due |
| * to Host reset. |
| * |
| * @ioc: per adapter object. |
| * @status: Status of issued command. |
| * @mpi_request:mf request pointer. |
| * @sz: size of buffer. |
| * |
| * @Returns - 1/0 Reset to be done or Not |
| */ |
| u8 |
| mpt3sas_base_check_cmd_timeout(struct MPT3SAS_ADAPTER *ioc, |
| u8 status, void *mpi_request, int sz) |
| { |
| u8 issue_reset = 0; |
| |
| if (!(status & MPT3_CMD_RESET)) |
| issue_reset = 1; |
| |
| ioc_err(ioc, "Command %s\n", |
| issue_reset == 0 ? "terminated due to Host Reset" : "Timeout"); |
| _debug_dump_mf(mpi_request, sz); |
| |
| return issue_reset; |
| } |
| |
| /** |
| * _scsih_set_fwfault_debug - global setting of ioc->fwfault_debug. |
| * @val: ? |
| * @kp: ? |
| * |
| * Return: ? |
| */ |
| static int |
| _scsih_set_fwfault_debug(const char *val, const struct kernel_param *kp) |
| { |
| int ret = param_set_int(val, kp); |
| struct MPT3SAS_ADAPTER *ioc; |
| |
| if (ret) |
| return ret; |
| |
| /* global ioc spinlock to protect controller list on list operations */ |
| pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug); |
| spin_lock(&gioc_lock); |
| list_for_each_entry(ioc, &mpt3sas_ioc_list, list) |
| ioc->fwfault_debug = mpt3sas_fwfault_debug; |
| spin_unlock(&gioc_lock); |
| return 0; |
| } |
| module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug, |
| param_get_int, &mpt3sas_fwfault_debug, 0644); |
| |
| /** |
| * _base_readl_aero - retry readl for max three times. |
| * @addr: MPT Fusion system interface register address |
| * |
| * Retry the readl() for max three times if it gets zero value |
| * while reading the system interface register. |
| */ |
| static inline u32 |
| _base_readl_aero(const volatile void __iomem *addr) |
| { |
| u32 i = 0, ret_val; |
| |
| do { |
| ret_val = readl(addr); |
| i++; |
| } while (ret_val == 0 && i < 3); |
| |
| return ret_val; |
| } |
| |
| static inline u32 |
| _base_readl(const volatile void __iomem *addr) |
| { |
| return readl(addr); |
| } |
| |
| /** |
| * _base_clone_reply_to_sys_mem - copies reply to reply free iomem |
| * in BAR0 space. |
| * |
| * @ioc: per adapter object |
| * @reply: reply message frame(lower 32bit addr) |
| * @index: System request message index. |
| */ |
| static void |
| _base_clone_reply_to_sys_mem(struct MPT3SAS_ADAPTER *ioc, u32 reply, |
| u32 index) |
| { |
| /* |
| * 256 is offset within sys register. |
| * 256 offset MPI frame starts. Max MPI frame supported is 32. |
| * 32 * 128 = 4K. From here, Clone of reply free for mcpu starts |
| */ |
| u16 cmd_credit = ioc->facts.RequestCredit + 1; |
| void __iomem *reply_free_iomem = (void __iomem *)ioc->chip + |
| MPI_FRAME_START_OFFSET + |
| (cmd_credit * ioc->request_sz) + (index * sizeof(u32)); |
| |
| writel(reply, reply_free_iomem); |
| } |
| |
| /** |
| * _base_clone_mpi_to_sys_mem - Writes/copies MPI frames |
| * to system/BAR0 region. |
| * |
| * @dst_iomem: Pointer to the destination location in BAR0 space. |
| * @src: Pointer to the Source data. |
| * @size: Size of data to be copied. |
| */ |
| static void |
| _base_clone_mpi_to_sys_mem(void *dst_iomem, void *src, u32 size) |
| { |
| int i; |
| u32 *src_virt_mem = (u32 *)src; |
| |
| for (i = 0; i < size/4; i++) |
| writel((u32)src_virt_mem[i], |
| (void __iomem *)dst_iomem + (i * 4)); |
| } |
| |
| /** |
| * _base_clone_to_sys_mem - Writes/copies data to system/BAR0 region |
| * |
| * @dst_iomem: Pointer to the destination location in BAR0 space. |
| * @src: Pointer to the Source data. |
| * @size: Size of data to be copied. |
| */ |
| static void |
| _base_clone_to_sys_mem(void __iomem *dst_iomem, void *src, u32 size) |
| { |
| int i; |
| u32 *src_virt_mem = (u32 *)(src); |
| |
| for (i = 0; i < size/4; i++) |
| writel((u32)src_virt_mem[i], |
| (void __iomem *)dst_iomem + (i * 4)); |
| } |
| |
| /** |
| * _base_get_chain - Calculates and Returns virtual chain address |
| * for the provided smid in BAR0 space. |
| * |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @sge_chain_count: Scatter gather chain count. |
| * |
| * Return: the chain address. |
| */ |
| static inline void __iomem* |
| _base_get_chain(struct MPT3SAS_ADAPTER *ioc, u16 smid, |
| u8 sge_chain_count) |
| { |
| void __iomem *base_chain, *chain_virt; |
| u16 cmd_credit = ioc->facts.RequestCredit + 1; |
| |
| base_chain = (void __iomem *)ioc->chip + MPI_FRAME_START_OFFSET + |
| (cmd_credit * ioc->request_sz) + |
| REPLY_FREE_POOL_SIZE; |
| chain_virt = base_chain + (smid * ioc->facts.MaxChainDepth * |
| ioc->request_sz) + (sge_chain_count * ioc->request_sz); |
| return chain_virt; |
| } |
| |
| /** |
| * _base_get_chain_phys - Calculates and Returns physical address |
| * in BAR0 for scatter gather chains, for |
| * the provided smid. |
| * |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @sge_chain_count: Scatter gather chain count. |
| * |
| * Return: Physical chain address. |
| */ |
| static inline phys_addr_t |
| _base_get_chain_phys(struct MPT3SAS_ADAPTER *ioc, u16 smid, |
| u8 sge_chain_count) |
| { |
| phys_addr_t base_chain_phys, chain_phys; |
| u16 cmd_credit = ioc->facts.RequestCredit + 1; |
| |
| base_chain_phys = ioc->chip_phys + MPI_FRAME_START_OFFSET + |
| (cmd_credit * ioc->request_sz) + |
| REPLY_FREE_POOL_SIZE; |
| chain_phys = base_chain_phys + (smid * ioc->facts.MaxChainDepth * |
| ioc->request_sz) + (sge_chain_count * ioc->request_sz); |
| return chain_phys; |
| } |
| |
| /** |
| * _base_get_buffer_bar0 - Calculates and Returns BAR0 mapped Host |
| * buffer address for the provided smid. |
| * (Each smid can have 64K starts from 17024) |
| * |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return: Pointer to buffer location in BAR0. |
| */ |
| |
| static void __iomem * |
| _base_get_buffer_bar0(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| u16 cmd_credit = ioc->facts.RequestCredit + 1; |
| // Added extra 1 to reach end of chain. |
| void __iomem *chain_end = _base_get_chain(ioc, |
| cmd_credit + 1, |
| ioc->facts.MaxChainDepth); |
| return chain_end + (smid * 64 * 1024); |
| } |
| |
| /** |
| * _base_get_buffer_phys_bar0 - Calculates and Returns BAR0 mapped |
| * Host buffer Physical address for the provided smid. |
| * (Each smid can have 64K starts from 17024) |
| * |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return: Pointer to buffer location in BAR0. |
| */ |
| static phys_addr_t |
| _base_get_buffer_phys_bar0(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| u16 cmd_credit = ioc->facts.RequestCredit + 1; |
| phys_addr_t chain_end_phys = _base_get_chain_phys(ioc, |
| cmd_credit + 1, |
| ioc->facts.MaxChainDepth); |
| return chain_end_phys + (smid * 64 * 1024); |
| } |
| |
| /** |
| * _base_get_chain_buffer_dma_to_chain_buffer - Iterates chain |
| * lookup list and Provides chain_buffer |
| * address for the matching dma address. |
| * (Each smid can have 64K starts from 17024) |
| * |
| * @ioc: per adapter object |
| * @chain_buffer_dma: Chain buffer dma address. |
| * |
| * Return: Pointer to chain buffer. Or Null on Failure. |
| */ |
| static void * |
| _base_get_chain_buffer_dma_to_chain_buffer(struct MPT3SAS_ADAPTER *ioc, |
| dma_addr_t chain_buffer_dma) |
| { |
| u16 index, j; |
| struct chain_tracker *ct; |
| |
| for (index = 0; index < ioc->scsiio_depth; index++) { |
| for (j = 0; j < ioc->chains_needed_per_io; j++) { |
| ct = &ioc->chain_lookup[index].chains_per_smid[j]; |
| if (ct && ct->chain_buffer_dma == chain_buffer_dma) |
| return ct->chain_buffer; |
| } |
| } |
| ioc_info(ioc, "Provided chain_buffer_dma address is not in the lookup list\n"); |
| return NULL; |
| } |
| |
| /** |
| * _clone_sg_entries - MPI EP's scsiio and config requests |
| * are handled here. Base function for |
| * double buffering, before submitting |
| * the requests. |
| * |
| * @ioc: per adapter object. |
| * @mpi_request: mf request pointer. |
| * @smid: system request message index. |
| */ |
| static void _clone_sg_entries(struct MPT3SAS_ADAPTER *ioc, |
| void *mpi_request, u16 smid) |
| { |
| Mpi2SGESimple32_t *sgel, *sgel_next; |
| u32 sgl_flags, sge_chain_count = 0; |
| bool is_write = false; |
| u16 i = 0; |
| void __iomem *buffer_iomem; |
| phys_addr_t buffer_iomem_phys; |
| void __iomem *buff_ptr; |
| phys_addr_t buff_ptr_phys; |
| void __iomem *dst_chain_addr[MCPU_MAX_CHAINS_PER_IO]; |
| void *src_chain_addr[MCPU_MAX_CHAINS_PER_IO]; |
| phys_addr_t dst_addr_phys; |
| MPI2RequestHeader_t *request_hdr; |
| struct scsi_cmnd *scmd; |
| struct scatterlist *sg_scmd = NULL; |
| int is_scsiio_req = 0; |
| |
| request_hdr = (MPI2RequestHeader_t *) mpi_request; |
| |
| if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST) { |
| Mpi25SCSIIORequest_t *scsiio_request = |
| (Mpi25SCSIIORequest_t *)mpi_request; |
| sgel = (Mpi2SGESimple32_t *) &scsiio_request->SGL; |
| is_scsiio_req = 1; |
| } else if (request_hdr->Function == MPI2_FUNCTION_CONFIG) { |
| Mpi2ConfigRequest_t *config_req = |
| (Mpi2ConfigRequest_t *)mpi_request; |
| sgel = (Mpi2SGESimple32_t *) &config_req->PageBufferSGE; |
| } else |
| return; |
| |
| /* From smid we can get scsi_cmd, once we have sg_scmd, |
| * we just need to get sg_virt and sg_next to get virual |
| * address associated with sgel->Address. |
| */ |
| |
| if (is_scsiio_req) { |
| /* Get scsi_cmd using smid */ |
| scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid); |
| if (scmd == NULL) { |
| ioc_err(ioc, "scmd is NULL\n"); |
| return; |
| } |
| |
| /* Get sg_scmd from scmd provided */ |
| sg_scmd = scsi_sglist(scmd); |
| } |
| |
| /* |
| * 0 - 255 System register |
| * 256 - 4352 MPI Frame. (This is based on maxCredit 32) |
| * 4352 - 4864 Reply_free pool (512 byte is reserved |
| * considering maxCredit 32. Reply need extra |
| * room, for mCPU case kept four times of |
| * maxCredit). |
| * 4864 - 17152 SGE chain element. (32cmd * 3 chain of |
| * 128 byte size = 12288) |
| * 17152 - x Host buffer mapped with smid. |
| * (Each smid can have 64K Max IO.) |
| * BAR0+Last 1K MSIX Addr and Data |
| * Total size in use 2113664 bytes of 4MB BAR0 |
| */ |
| |
| buffer_iomem = _base_get_buffer_bar0(ioc, smid); |
| buffer_iomem_phys = _base_get_buffer_phys_bar0(ioc, smid); |
| |
| buff_ptr = buffer_iomem; |
| buff_ptr_phys = buffer_iomem_phys; |
| WARN_ON(buff_ptr_phys > U32_MAX); |
| |
| if (le32_to_cpu(sgel->FlagsLength) & |
| (MPI2_SGE_FLAGS_HOST_TO_IOC << MPI2_SGE_FLAGS_SHIFT)) |
| is_write = true; |
| |
| for (i = 0; i < MPT_MIN_PHYS_SEGMENTS + ioc->facts.MaxChainDepth; i++) { |
| |
| sgl_flags = |
| (le32_to_cpu(sgel->FlagsLength) >> MPI2_SGE_FLAGS_SHIFT); |
| |
| switch (sgl_flags & MPI2_SGE_FLAGS_ELEMENT_MASK) { |
| case MPI2_SGE_FLAGS_CHAIN_ELEMENT: |
| /* |
| * Helper function which on passing |
| * chain_buffer_dma returns chain_buffer. Get |
| * the virtual address for sgel->Address |
| */ |
| sgel_next = |
| _base_get_chain_buffer_dma_to_chain_buffer(ioc, |
| le32_to_cpu(sgel->Address)); |
| if (sgel_next == NULL) |
| return; |
| /* |
| * This is coping 128 byte chain |
| * frame (not a host buffer) |
| */ |
| dst_chain_addr[sge_chain_count] = |
| _base_get_chain(ioc, |
| smid, sge_chain_count); |
| src_chain_addr[sge_chain_count] = |
| (void *) sgel_next; |
| dst_addr_phys = _base_get_chain_phys(ioc, |
| smid, sge_chain_count); |
| WARN_ON(dst_addr_phys > U32_MAX); |
| sgel->Address = |
| cpu_to_le32(lower_32_bits(dst_addr_phys)); |
| sgel = sgel_next; |
| sge_chain_count++; |
| break; |
| case MPI2_SGE_FLAGS_SIMPLE_ELEMENT: |
| if (is_write) { |
| if (is_scsiio_req) { |
| _base_clone_to_sys_mem(buff_ptr, |
| sg_virt(sg_scmd), |
| (le32_to_cpu(sgel->FlagsLength) & |
| 0x00ffffff)); |
| /* |
| * FIXME: this relies on a a zero |
| * PCI mem_offset. |
| */ |
| sgel->Address = |
| cpu_to_le32((u32)buff_ptr_phys); |
| } else { |
| _base_clone_to_sys_mem(buff_ptr, |
| ioc->config_vaddr, |
| (le32_to_cpu(sgel->FlagsLength) & |
| 0x00ffffff)); |
| sgel->Address = |
| cpu_to_le32((u32)buff_ptr_phys); |
| } |
| } |
| buff_ptr += (le32_to_cpu(sgel->FlagsLength) & |
| 0x00ffffff); |
| buff_ptr_phys += (le32_to_cpu(sgel->FlagsLength) & |
| 0x00ffffff); |
| if ((le32_to_cpu(sgel->FlagsLength) & |
| (MPI2_SGE_FLAGS_END_OF_BUFFER |
| << MPI2_SGE_FLAGS_SHIFT))) |
| goto eob_clone_chain; |
| else { |
| /* |
| * Every single element in MPT will have |
| * associated sg_next. Better to sanity that |
| * sg_next is not NULL, but it will be a bug |
| * if it is null. |
| */ |
| if (is_scsiio_req) { |
| sg_scmd = sg_next(sg_scmd); |
| if (sg_scmd) |
| sgel++; |
| else |
| goto eob_clone_chain; |
| } |
| } |
| break; |
| } |
| } |
| |
| eob_clone_chain: |
| for (i = 0; i < sge_chain_count; i++) { |
| if (is_scsiio_req) |
| _base_clone_to_sys_mem(dst_chain_addr[i], |
| src_chain_addr[i], ioc->request_sz); |
| } |
| } |
| |
| /** |
| * mpt3sas_remove_dead_ioc_func - kthread context to remove dead ioc |
| * @arg: input argument, used to derive ioc |
| * |
| * Return: |
| * 0 if controller is removed from pci subsystem. |
| * -1 for other case. |
| */ |
| static int mpt3sas_remove_dead_ioc_func(void *arg) |
| { |
| struct MPT3SAS_ADAPTER *ioc = (struct MPT3SAS_ADAPTER *)arg; |
| struct pci_dev *pdev; |
| |
| if (!ioc) |
| return -1; |
| |
| pdev = ioc->pdev; |
| if (!pdev) |
| return -1; |
| pci_stop_and_remove_bus_device_locked(pdev); |
| return 0; |
| } |
| |
| /** |
| * _base_fault_reset_work - workq handling ioc fault conditions |
| * @work: input argument, used to derive ioc |
| * |
| * Context: sleep. |
| */ |
| static void |
| _base_fault_reset_work(struct work_struct *work) |
| { |
| struct MPT3SAS_ADAPTER *ioc = |
| container_of(work, struct MPT3SAS_ADAPTER, fault_reset_work.work); |
| unsigned long flags; |
| u32 doorbell; |
| int rc; |
| struct task_struct *p; |
| |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| if ((ioc->shost_recovery && (ioc->ioc_coredump_loop == 0)) || |
| ioc->pci_error_recovery) |
| goto rearm_timer; |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| |
| doorbell = mpt3sas_base_get_iocstate(ioc, 0); |
| if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_MASK) { |
| ioc_err(ioc, "SAS host is non-operational !!!!\n"); |
| |
| /* It may be possible that EEH recovery can resolve some of |
| * pci bus failure issues rather removing the dead ioc function |
| * by considering controller is in a non-operational state. So |
| * here priority is given to the EEH recovery. If it doesn't |
| * not resolve this issue, mpt3sas driver will consider this |
| * controller to non-operational state and remove the dead ioc |
| * function. |
| */ |
| if (ioc->non_operational_loop++ < 5) { |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, |
| flags); |
| goto rearm_timer; |
| } |
| |
| /* |
| * Call _scsih_flush_pending_cmds callback so that we flush all |
| * pending commands back to OS. This call is required to aovid |
| * deadlock at block layer. Dead IOC will fail to do diag reset, |
| * and this call is safe since dead ioc will never return any |
| * command back from HW. |
| */ |
| ioc->schedule_dead_ioc_flush_running_cmds(ioc); |
| /* |
| * Set remove_host flag early since kernel thread will |
| * take some time to execute. |
| */ |
| ioc->remove_host = 1; |
| /*Remove the Dead Host */ |
| p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc, |
| "%s_dead_ioc_%d", ioc->driver_name, ioc->id); |
| if (IS_ERR(p)) |
| ioc_err(ioc, "%s: Running mpt3sas_dead_ioc thread failed !!!!\n", |
| __func__); |
| else |
| ioc_err(ioc, "%s: Running mpt3sas_dead_ioc thread success !!!!\n", |
| __func__); |
| return; /* don't rearm timer */ |
| } |
| |
| if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_COREDUMP) { |
| u8 timeout = (ioc->manu_pg11.CoreDumpTOSec) ? |
| ioc->manu_pg11.CoreDumpTOSec : |
| MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS; |
| |
| timeout /= (FAULT_POLLING_INTERVAL/1000); |
| |
| if (ioc->ioc_coredump_loop == 0) { |
| mpt3sas_print_coredump_info(ioc, |
| doorbell & MPI2_DOORBELL_DATA_MASK); |
| /* do not accept any IOs and disable the interrupts */ |
| spin_lock_irqsave( |
| &ioc->ioc_reset_in_progress_lock, flags); |
| ioc->shost_recovery = 1; |
| spin_unlock_irqrestore( |
| &ioc->ioc_reset_in_progress_lock, flags); |
| mpt3sas_base_mask_interrupts(ioc); |
| _base_clear_outstanding_commands(ioc); |
| } |
| |
| ioc_info(ioc, "%s: CoreDump loop %d.", |
| __func__, ioc->ioc_coredump_loop); |
| |
| /* Wait until CoreDump completes or times out */ |
| if (ioc->ioc_coredump_loop++ < timeout) { |
| spin_lock_irqsave( |
| &ioc->ioc_reset_in_progress_lock, flags); |
| goto rearm_timer; |
| } |
| } |
| |
| if (ioc->ioc_coredump_loop) { |
| if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_COREDUMP) |
| ioc_err(ioc, "%s: CoreDump completed. LoopCount: %d", |
| __func__, ioc->ioc_coredump_loop); |
| else |
| ioc_err(ioc, "%s: CoreDump Timed out. LoopCount: %d", |
| __func__, ioc->ioc_coredump_loop); |
| ioc->ioc_coredump_loop = MPT3SAS_COREDUMP_LOOP_DONE; |
| } |
| ioc->non_operational_loop = 0; |
| if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) { |
| rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); |
| ioc_warn(ioc, "%s: hard reset: %s\n", |
| __func__, rc == 0 ? "success" : "failed"); |
| doorbell = mpt3sas_base_get_iocstate(ioc, 0); |
| if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { |
| mpt3sas_print_fault_code(ioc, doorbell & |
| MPI2_DOORBELL_DATA_MASK); |
| } else if ((doorbell & MPI2_IOC_STATE_MASK) == |
| MPI2_IOC_STATE_COREDUMP) |
| mpt3sas_print_coredump_info(ioc, doorbell & |
| MPI2_DOORBELL_DATA_MASK); |
| if (rc && (doorbell & MPI2_IOC_STATE_MASK) != |
| MPI2_IOC_STATE_OPERATIONAL) |
| return; /* don't rearm timer */ |
| } |
| ioc->ioc_coredump_loop = 0; |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| rearm_timer: |
| if (ioc->fault_reset_work_q) |
| queue_delayed_work(ioc->fault_reset_work_q, |
| &ioc->fault_reset_work, |
| msecs_to_jiffies(FAULT_POLLING_INTERVAL)); |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| } |
| |
| /** |
| * mpt3sas_base_start_watchdog - start the fault_reset_work_q |
| * @ioc: per adapter object |
| * |
| * Context: sleep. |
| */ |
| void |
| mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc) |
| { |
| unsigned long flags; |
| |
| if (ioc->fault_reset_work_q) |
| return; |
| |
| /* initialize fault polling */ |
| |
| INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); |
| snprintf(ioc->fault_reset_work_q_name, |
| sizeof(ioc->fault_reset_work_q_name), "poll_%s%d_status", |
| ioc->driver_name, ioc->id); |
| ioc->fault_reset_work_q = |
| create_singlethread_workqueue(ioc->fault_reset_work_q_name); |
| if (!ioc->fault_reset_work_q) { |
| ioc_err(ioc, "%s: failed (line=%d)\n", __func__, __LINE__); |
| return; |
| } |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| if (ioc->fault_reset_work_q) |
| queue_delayed_work(ioc->fault_reset_work_q, |
| &ioc->fault_reset_work, |
| msecs_to_jiffies(FAULT_POLLING_INTERVAL)); |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| } |
| |
| /** |
| * mpt3sas_base_stop_watchdog - stop the fault_reset_work_q |
| * @ioc: per adapter object |
| * |
| * Context: sleep. |
| */ |
| void |
| mpt3sas_base_stop_watchdog(struct MPT3SAS_ADAPTER *ioc) |
| { |
| unsigned long flags; |
| struct workqueue_struct *wq; |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| wq = ioc->fault_reset_work_q; |
| ioc->fault_reset_work_q = NULL; |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| if (wq) { |
| if (!cancel_delayed_work_sync(&ioc->fault_reset_work)) |
| flush_workqueue(wq); |
| destroy_workqueue(wq); |
| } |
| } |
| |
| /** |
| * mpt3sas_base_fault_info - verbose translation of firmware FAULT code |
| * @ioc: per adapter object |
| * @fault_code: fault code |
| */ |
| void |
| mpt3sas_base_fault_info(struct MPT3SAS_ADAPTER *ioc , u16 fault_code) |
| { |
| ioc_err(ioc, "fault_state(0x%04x)!\n", fault_code); |
| } |
| |
| /** |
| * mpt3sas_base_coredump_info - verbose translation of firmware CoreDump state |
| * @ioc: per adapter object |
| * @fault_code: fault code |
| * |
| * Return nothing. |
| */ |
| void |
| mpt3sas_base_coredump_info(struct MPT3SAS_ADAPTER *ioc, u16 fault_code) |
| { |
| ioc_err(ioc, "coredump_state(0x%04x)!\n", fault_code); |
| } |
| |
| /** |
| * mpt3sas_base_wait_for_coredump_completion - Wait until coredump |
| * completes or times out |
| * @ioc: per adapter object |
| * @caller: caller function name |
| * |
| * Returns 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_wait_for_coredump_completion(struct MPT3SAS_ADAPTER *ioc, |
| const char *caller) |
| { |
| u8 timeout = (ioc->manu_pg11.CoreDumpTOSec) ? |
| ioc->manu_pg11.CoreDumpTOSec : |
| MPT3SAS_DEFAULT_COREDUMP_TIMEOUT_SECONDS; |
| |
| int ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_FAULT, |
| timeout); |
| |
| if (ioc_state) |
| ioc_err(ioc, |
| "%s: CoreDump timed out. (ioc_state=0x%x)\n", |
| caller, ioc_state); |
| else |
| ioc_info(ioc, |
| "%s: CoreDump completed. (ioc_state=0x%x)\n", |
| caller, ioc_state); |
| |
| return ioc_state; |
| } |
| |
| /** |
| * mpt3sas_halt_firmware - halt's mpt controller firmware |
| * @ioc: per adapter object |
| * |
| * For debugging timeout related issues. Writing 0xCOFFEE00 |
| * to the doorbell register will halt controller firmware. With |
| * the purpose to stop both driver and firmware, the enduser can |
| * obtain a ring buffer from controller UART. |
| */ |
| void |
| mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u32 doorbell; |
| |
| if (!ioc->fwfault_debug) |
| return; |
| |
| dump_stack(); |
| |
| doorbell = ioc->base_readl(&ioc->chip->Doorbell); |
| if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { |
| mpt3sas_print_fault_code(ioc, doorbell & |
| MPI2_DOORBELL_DATA_MASK); |
| } else if ((doorbell & MPI2_IOC_STATE_MASK) == |
| MPI2_IOC_STATE_COREDUMP) { |
| mpt3sas_print_coredump_info(ioc, doorbell & |
| MPI2_DOORBELL_DATA_MASK); |
| } else { |
| writel(0xC0FFEE00, &ioc->chip->Doorbell); |
| ioc_err(ioc, "Firmware is halted due to command timeout\n"); |
| } |
| |
| if (ioc->fwfault_debug == 2) |
| for (;;) |
| ; |
| else |
| panic("panic in %s\n", __func__); |
| } |
| |
| /** |
| * _base_sas_ioc_info - verbose translation of the ioc status |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| * @request_hdr: request mf |
| */ |
| static void |
| _base_sas_ioc_info(struct MPT3SAS_ADAPTER *ioc, MPI2DefaultReply_t *mpi_reply, |
| MPI2RequestHeader_t *request_hdr) |
| { |
| u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & |
| MPI2_IOCSTATUS_MASK; |
| char *desc = NULL; |
| u16 frame_sz; |
| char *func_str = NULL; |
| |
| /* SCSI_IO, RAID_PASS are handled from _scsih_scsi_ioc_info */ |
| if (request_hdr->Function == MPI2_FUNCTION_SCSI_IO_REQUEST || |
| request_hdr->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || |
| request_hdr->Function == MPI2_FUNCTION_EVENT_NOTIFICATION) |
| return; |
| |
| if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE) |
| return; |
| |
| switch (ioc_status) { |
| |
| /**************************************************************************** |
| * Common IOCStatus values for all replies |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_INVALID_FUNCTION: |
| desc = "invalid function"; |
| break; |
| case MPI2_IOCSTATUS_BUSY: |
| desc = "busy"; |
| break; |
| case MPI2_IOCSTATUS_INVALID_SGL: |
| desc = "invalid sgl"; |
| break; |
| case MPI2_IOCSTATUS_INTERNAL_ERROR: |
| desc = "internal error"; |
| break; |
| case MPI2_IOCSTATUS_INVALID_VPID: |
| desc = "invalid vpid"; |
| break; |
| case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES: |
| desc = "insufficient resources"; |
| break; |
| case MPI2_IOCSTATUS_INSUFFICIENT_POWER: |
| desc = "insufficient power"; |
| break; |
| case MPI2_IOCSTATUS_INVALID_FIELD: |
| desc = "invalid field"; |
| break; |
| case MPI2_IOCSTATUS_INVALID_STATE: |
| desc = "invalid state"; |
| break; |
| case MPI2_IOCSTATUS_OP_STATE_NOT_SUPPORTED: |
| desc = "op state not supported"; |
| break; |
| |
| /**************************************************************************** |
| * Config IOCStatus values |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_CONFIG_INVALID_ACTION: |
| desc = "config invalid action"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_INVALID_TYPE: |
| desc = "config invalid type"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_INVALID_PAGE: |
| desc = "config invalid page"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_INVALID_DATA: |
| desc = "config invalid data"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_NO_DEFAULTS: |
| desc = "config no defaults"; |
| break; |
| case MPI2_IOCSTATUS_CONFIG_CANT_COMMIT: |
| desc = "config cant commit"; |
| break; |
| |
| /**************************************************************************** |
| * SCSI IO Reply |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR: |
| case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE: |
| case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE: |
| case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN: |
| case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN: |
| case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR: |
| case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR: |
| case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED: |
| case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: |
| case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED: |
| case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED: |
| case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED: |
| break; |
| |
| /**************************************************************************** |
| * For use by SCSI Initiator and SCSI Target end-to-end data protection |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_EEDP_GUARD_ERROR: |
| desc = "eedp guard error"; |
| break; |
| case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR: |
| desc = "eedp ref tag error"; |
| break; |
| case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR: |
| desc = "eedp app tag error"; |
| break; |
| |
| /**************************************************************************** |
| * SCSI Target values |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_TARGET_INVALID_IO_INDEX: |
| desc = "target invalid io index"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_ABORTED: |
| desc = "target aborted"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: |
| desc = "target no conn retryable"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_NO_CONNECTION: |
| desc = "target no connection"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: |
| desc = "target xfer count mismatch"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: |
| desc = "target data offset error"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: |
| desc = "target too much write data"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_IU_TOO_SHORT: |
| desc = "target iu too short"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: |
| desc = "target ack nak timeout"; |
| break; |
| case MPI2_IOCSTATUS_TARGET_NAK_RECEIVED: |
| desc = "target nak received"; |
| break; |
| |
| /**************************************************************************** |
| * Serial Attached SCSI values |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_SAS_SMP_REQUEST_FAILED: |
| desc = "smp request failed"; |
| break; |
| case MPI2_IOCSTATUS_SAS_SMP_DATA_OVERRUN: |
| desc = "smp data overrun"; |
| break; |
| |
| /**************************************************************************** |
| * Diagnostic Buffer Post / Diagnostic Release values |
| ****************************************************************************/ |
| |
| case MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED: |
| desc = "diagnostic released"; |
| break; |
| default: |
| break; |
| } |
| |
| if (!desc) |
| return; |
| |
| switch (request_hdr->Function) { |
| case MPI2_FUNCTION_CONFIG: |
| frame_sz = sizeof(Mpi2ConfigRequest_t) + ioc->sge_size; |
| func_str = "config_page"; |
| break; |
| case MPI2_FUNCTION_SCSI_TASK_MGMT: |
| frame_sz = sizeof(Mpi2SCSITaskManagementRequest_t); |
| func_str = "task_mgmt"; |
| break; |
| case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL: |
| frame_sz = sizeof(Mpi2SasIoUnitControlRequest_t); |
| func_str = "sas_iounit_ctl"; |
| break; |
| case MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR: |
| frame_sz = sizeof(Mpi2SepRequest_t); |
| func_str = "enclosure"; |
| break; |
| case MPI2_FUNCTION_IOC_INIT: |
| frame_sz = sizeof(Mpi2IOCInitRequest_t); |
| func_str = "ioc_init"; |
| break; |
| case MPI2_FUNCTION_PORT_ENABLE: |
| frame_sz = sizeof(Mpi2PortEnableRequest_t); |
| func_str = "port_enable"; |
| break; |
| case MPI2_FUNCTION_SMP_PASSTHROUGH: |
| frame_sz = sizeof(Mpi2SmpPassthroughRequest_t) + ioc->sge_size; |
| func_str = "smp_passthru"; |
| break; |
| case MPI2_FUNCTION_NVME_ENCAPSULATED: |
| frame_sz = sizeof(Mpi26NVMeEncapsulatedRequest_t) + |
| ioc->sge_size; |
| func_str = "nvme_encapsulated"; |
| break; |
| default: |
| frame_sz = 32; |
| func_str = "unknown"; |
| break; |
| } |
| |
| ioc_warn(ioc, "ioc_status: %s(0x%04x), request(0x%p),(%s)\n", |
| desc, ioc_status, request_hdr, func_str); |
| |
| _debug_dump_mf(request_hdr, frame_sz/4); |
| } |
| |
| /** |
| * _base_display_event_data - verbose translation of firmware asyn events |
| * @ioc: per adapter object |
| * @mpi_reply: reply mf payload returned from firmware |
| */ |
| static void |
| _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, |
| Mpi2EventNotificationReply_t *mpi_reply) |
| { |
| char *desc = NULL; |
| u16 event; |
| |
| if (!(ioc->logging_level & MPT_DEBUG_EVENTS)) |
| return; |
| |
| event = le16_to_cpu(mpi_reply->Event); |
| |
| switch (event) { |
| case MPI2_EVENT_LOG_DATA: |
| desc = "Log Data"; |
| break; |
| case MPI2_EVENT_STATE_CHANGE: |
| desc = "Status Change"; |
| break; |
| case MPI2_EVENT_HARD_RESET_RECEIVED: |
| desc = "Hard Reset Received"; |
| break; |
| case MPI2_EVENT_EVENT_CHANGE: |
| desc = "Event Change"; |
| break; |
| case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE: |
| desc = "Device Status Change"; |
| break; |
| case MPI2_EVENT_IR_OPERATION_STATUS: |
| if (!ioc->hide_ir_msg) |
| desc = "IR Operation Status"; |
| break; |
| case MPI2_EVENT_SAS_DISCOVERY: |
| { |
| Mpi2EventDataSasDiscovery_t *event_data = |
| (Mpi2EventDataSasDiscovery_t *)mpi_reply->EventData; |
| ioc_info(ioc, "Discovery: (%s)", |
| event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED ? |
| "start" : "stop"); |
| if (event_data->DiscoveryStatus) |
| pr_cont(" discovery_status(0x%08x)", |
| le32_to_cpu(event_data->DiscoveryStatus)); |
| pr_cont("\n"); |
| return; |
| } |
| case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE: |
| desc = "SAS Broadcast Primitive"; |
| break; |
| case MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE: |
| desc = "SAS Init Device Status Change"; |
| break; |
| case MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW: |
| desc = "SAS Init Table Overflow"; |
| break; |
| case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST: |
| desc = "SAS Topology Change List"; |
| break; |
| case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE: |
| desc = "SAS Enclosure Device Status Change"; |
| break; |
| case MPI2_EVENT_IR_VOLUME: |
| if (!ioc->hide_ir_msg) |
| desc = "IR Volume"; |
| break; |
| case MPI2_EVENT_IR_PHYSICAL_DISK: |
| if (!ioc->hide_ir_msg) |
| desc = "IR Physical Disk"; |
| break; |
| case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: |
| if (!ioc->hide_ir_msg) |
| desc = "IR Configuration Change List"; |
| break; |
| case MPI2_EVENT_LOG_ENTRY_ADDED: |
| if (!ioc->hide_ir_msg) |
| desc = "Log Entry Added"; |
| break; |
| case MPI2_EVENT_TEMP_THRESHOLD: |
| desc = "Temperature Threshold"; |
| break; |
| case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION: |
| desc = "Cable Event"; |
| break; |
| case MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR: |
| desc = "SAS Device Discovery Error"; |
| break; |
| case MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE: |
| desc = "PCIE Device Status Change"; |
| break; |
| case MPI2_EVENT_PCIE_ENUMERATION: |
| { |
| Mpi26EventDataPCIeEnumeration_t *event_data = |
| (Mpi26EventDataPCIeEnumeration_t *)mpi_reply->EventData; |
| ioc_info(ioc, "PCIE Enumeration: (%s)", |
| event_data->ReasonCode == MPI26_EVENT_PCIE_ENUM_RC_STARTED ? |
| "start" : "stop"); |
| if (event_data->EnumerationStatus) |
| pr_cont("enumeration_status(0x%08x)", |
| le32_to_cpu(event_data->EnumerationStatus)); |
| pr_cont("\n"); |
| return; |
| } |
| case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST: |
| desc = "PCIE Topology Change List"; |
| break; |
| } |
| |
| if (!desc) |
| return; |
| |
| ioc_info(ioc, "%s\n", desc); |
| } |
| |
| /** |
| * _base_sas_log_info - verbose translation of firmware log info |
| * @ioc: per adapter object |
| * @log_info: log info |
| */ |
| static void |
| _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info) |
| { |
| union loginfo_type { |
| u32 loginfo; |
| struct { |
| u32 subcode:16; |
| u32 code:8; |
| u32 originator:4; |
| u32 bus_type:4; |
| } dw; |
| }; |
| union loginfo_type sas_loginfo; |
| char *originator_str = NULL; |
| |
| sas_loginfo.loginfo = log_info; |
| if (sas_loginfo.dw.bus_type != 3 /*SAS*/) |
| return; |
| |
| /* each nexus loss loginfo */ |
| if (log_info == 0x31170000) |
| return; |
| |
| /* eat the loginfos associated with task aborts */ |
| if (ioc->ignore_loginfos && (log_info == 0x30050000 || log_info == |
| 0x31140000 || log_info == 0x31130000)) |
| return; |
| |
| switch (sas_loginfo.dw.originator) { |
| case 0: |
| originator_str = "IOP"; |
| break; |
| case 1: |
| originator_str = "PL"; |
| break; |
| case 2: |
| if (!ioc->hide_ir_msg) |
| originator_str = "IR"; |
| else |
| originator_str = "WarpDrive"; |
| break; |
| } |
| |
| ioc_warn(ioc, "log_info(0x%08x): originator(%s), code(0x%02x), sub_code(0x%04x)\n", |
| log_info, |
| originator_str, sas_loginfo.dw.code, sas_loginfo.dw.subcode); |
| } |
| |
| /** |
| * _base_display_reply_info - |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| */ |
| static void |
| _base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, |
| u32 reply) |
| { |
| MPI2DefaultReply_t *mpi_reply; |
| u16 ioc_status; |
| u32 loginfo = 0; |
| |
| mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); |
| if (unlikely(!mpi_reply)) { |
| ioc_err(ioc, "mpi_reply not valid at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return; |
| } |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus); |
| |
| if ((ioc_status & MPI2_IOCSTATUS_MASK) && |
| (ioc->logging_level & MPT_DEBUG_REPLY)) { |
| _base_sas_ioc_info(ioc , mpi_reply, |
| mpt3sas_base_get_msg_frame(ioc, smid)); |
| } |
| |
| if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { |
| loginfo = le32_to_cpu(mpi_reply->IOCLogInfo); |
| _base_sas_log_info(ioc, loginfo); |
| } |
| |
| if (ioc_status || loginfo) { |
| ioc_status &= MPI2_IOCSTATUS_MASK; |
| mpt3sas_trigger_mpi(ioc, ioc_status, loginfo); |
| } |
| } |
| |
| /** |
| * mpt3sas_base_done - base internal command completion routine |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| * |
| * Return: |
| * 1 meaning mf should be freed from _base_interrupt |
| * 0 means the mf is freed from this function. |
| */ |
| u8 |
| mpt3sas_base_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, |
| u32 reply) |
| { |
| MPI2DefaultReply_t *mpi_reply; |
| |
| mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); |
| if (mpi_reply && mpi_reply->Function == MPI2_FUNCTION_EVENT_ACK) |
| return mpt3sas_check_for_pending_internal_cmds(ioc, smid); |
| |
| if (ioc->base_cmds.status == MPT3_CMD_NOT_USED) |
| return 1; |
| |
| ioc->base_cmds.status |= MPT3_CMD_COMPLETE; |
| if (mpi_reply) { |
| ioc->base_cmds.status |= MPT3_CMD_REPLY_VALID; |
| memcpy(ioc->base_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); |
| } |
| ioc->base_cmds.status &= ~MPT3_CMD_PENDING; |
| |
| complete(&ioc->base_cmds.done); |
| return 1; |
| } |
| |
| /** |
| * _base_async_event - main callback handler for firmware asyn events |
| * @ioc: per adapter object |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| * |
| * Return: |
| * 1 meaning mf should be freed from _base_interrupt |
| * 0 means the mf is freed from this function. |
| */ |
| static u8 |
| _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply) |
| { |
| Mpi2EventNotificationReply_t *mpi_reply; |
| Mpi2EventAckRequest_t *ack_request; |
| u16 smid; |
| struct _event_ack_list *delayed_event_ack; |
| |
| mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); |
| if (!mpi_reply) |
| return 1; |
| if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION) |
| return 1; |
| |
| _base_display_event_data(ioc, mpi_reply); |
| |
| if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED)) |
| goto out; |
| smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); |
| if (!smid) { |
| delayed_event_ack = kzalloc(sizeof(*delayed_event_ack), |
| GFP_ATOMIC); |
| if (!delayed_event_ack) |
| goto out; |
| INIT_LIST_HEAD(&delayed_event_ack->list); |
| delayed_event_ack->Event = mpi_reply->Event; |
| delayed_event_ack->EventContext = mpi_reply->EventContext; |
| list_add_tail(&delayed_event_ack->list, |
| &ioc->delayed_event_ack_list); |
| dewtprintk(ioc, |
| ioc_info(ioc, "DELAYED: EVENT ACK: event (0x%04x)\n", |
| le16_to_cpu(mpi_reply->Event))); |
| goto out; |
| } |
| |
| ack_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t)); |
| ack_request->Function = MPI2_FUNCTION_EVENT_ACK; |
| ack_request->Event = mpi_reply->Event; |
| ack_request->EventContext = mpi_reply->EventContext; |
| ack_request->VF_ID = 0; /* TODO */ |
| ack_request->VP_ID = 0; |
| ioc->put_smid_default(ioc, smid); |
| |
| out: |
| |
| /* scsih callback handler */ |
| mpt3sas_scsih_event_callback(ioc, msix_index, reply); |
| |
| /* ctl callback handler */ |
| mpt3sas_ctl_event_callback(ioc, msix_index, reply); |
| |
| return 1; |
| } |
| |
| static struct scsiio_tracker * |
| _get_st_from_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| struct scsi_cmnd *cmd; |
| |
| if (WARN_ON(!smid) || |
| WARN_ON(smid >= ioc->hi_priority_smid)) |
| return NULL; |
| |
| cmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid); |
| if (cmd) |
| return scsi_cmd_priv(cmd); |
| |
| return NULL; |
| } |
| |
| /** |
| * _base_get_cb_idx - obtain the callback index |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return: callback index. |
| */ |
| static u8 |
| _base_get_cb_idx(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| int i; |
| u16 ctl_smid = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT + 1; |
| u8 cb_idx = 0xFF; |
| |
| if (smid < ioc->hi_priority_smid) { |
| struct scsiio_tracker *st; |
| |
| if (smid < ctl_smid) { |
| st = _get_st_from_smid(ioc, smid); |
| if (st) |
| cb_idx = st->cb_idx; |
| } else if (smid == ctl_smid) |
| cb_idx = ioc->ctl_cb_idx; |
| } else if (smid < ioc->internal_smid) { |
| i = smid - ioc->hi_priority_smid; |
| cb_idx = ioc->hpr_lookup[i].cb_idx; |
| } else if (smid <= ioc->hba_queue_depth) { |
| i = smid - ioc->internal_smid; |
| cb_idx = ioc->internal_lookup[i].cb_idx; |
| } |
| return cb_idx; |
| } |
| |
| /** |
| * mpt3sas_base_mask_interrupts - disable interrupts |
| * @ioc: per adapter object |
| * |
| * Disabling ResetIRQ, Reply and Doorbell Interrupts |
| */ |
| void |
| mpt3sas_base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u32 him_register; |
| |
| ioc->mask_interrupts = 1; |
| him_register = ioc->base_readl(&ioc->chip->HostInterruptMask); |
| him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK; |
| writel(him_register, &ioc->chip->HostInterruptMask); |
| ioc->base_readl(&ioc->chip->HostInterruptMask); |
| } |
| |
| /** |
| * mpt3sas_base_unmask_interrupts - enable interrupts |
| * @ioc: per adapter object |
| * |
| * Enabling only Reply Interrupts |
| */ |
| void |
| mpt3sas_base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u32 him_register; |
| |
| him_register = ioc->base_readl(&ioc->chip->HostInterruptMask); |
| him_register &= ~MPI2_HIM_RIM; |
| writel(him_register, &ioc->chip->HostInterruptMask); |
| ioc->mask_interrupts = 0; |
| } |
| |
| union reply_descriptor { |
| u64 word; |
| struct { |
| u32 low; |
| u32 high; |
| } u; |
| }; |
| |
| static u32 base_mod64(u64 dividend, u32 divisor) |
| { |
| u32 remainder; |
| |
| if (!divisor) |
| pr_err("mpt3sas: DIVISOR is zero, in div fn\n"); |
| remainder = do_div(dividend, divisor); |
| return remainder; |
| } |
| |
| /** |
| * _base_process_reply_queue - Process reply descriptors from reply |
| * descriptor post queue. |
| * @reply_q: per IRQ's reply queue object. |
| * |
| * Return: number of reply descriptors processed from reply |
| * descriptor queue. |
| */ |
| static int |
| _base_process_reply_queue(struct adapter_reply_queue *reply_q) |
| { |
| union reply_descriptor rd; |
| u64 completed_cmds; |
| u8 request_descript_type; |
| u16 smid; |
| u8 cb_idx; |
| u32 reply; |
| u8 msix_index = reply_q->msix_index; |
| struct MPT3SAS_ADAPTER *ioc = reply_q->ioc; |
| Mpi2ReplyDescriptorsUnion_t *rpf; |
| u8 rc; |
| |
| completed_cmds = 0; |
| if (!atomic_add_unless(&reply_q->busy, 1, 1)) |
| return completed_cmds; |
| |
| rpf = &reply_q->reply_post_free[reply_q->reply_post_host_index]; |
| request_descript_type = rpf->Default.ReplyFlags |
| & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; |
| if (request_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) { |
| atomic_dec(&reply_q->busy); |
| return completed_cmds; |
| } |
| |
| cb_idx = 0xFF; |
| do { |
| rd.word = le64_to_cpu(rpf->Words); |
| if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX) |
| goto out; |
| reply = 0; |
| smid = le16_to_cpu(rpf->Default.DescriptorTypeDependent1); |
| if (request_descript_type == |
| MPI25_RPY_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO_SUCCESS || |
| request_descript_type == |
| MPI2_RPY_DESCRIPT_FLAGS_SCSI_IO_SUCCESS || |
| request_descript_type == |
| MPI26_RPY_DESCRIPT_FLAGS_PCIE_ENCAPSULATED_SUCCESS) { |
| cb_idx = _base_get_cb_idx(ioc, smid); |
| if ((likely(cb_idx < MPT_MAX_CALLBACKS)) && |
| (likely(mpt_callbacks[cb_idx] != NULL))) { |
| rc = mpt_callbacks[cb_idx](ioc, smid, |
| msix_index, 0); |
| if (rc) |
| mpt3sas_base_free_smid(ioc, smid); |
| } |
| } else if (request_descript_type == |
| MPI2_RPY_DESCRIPT_FLAGS_ADDRESS_REPLY) { |
| reply = le32_to_cpu( |
| rpf->AddressReply.ReplyFrameAddress); |
| if (reply > ioc->reply_dma_max_address || |
| reply < ioc->reply_dma_min_address) |
| reply = 0; |
| if (smid) { |
| cb_idx = _base_get_cb_idx(ioc, smid); |
| if ((likely(cb_idx < MPT_MAX_CALLBACKS)) && |
| (likely(mpt_callbacks[cb_idx] != NULL))) { |
| rc = mpt_callbacks[cb_idx](ioc, smid, |
| msix_index, reply); |
| if (reply) |
| _base_display_reply_info(ioc, |
| smid, msix_index, reply); |
| if (rc) |
| mpt3sas_base_free_smid(ioc, |
| smid); |
| } |
| } else { |
| _base_async_event(ioc, msix_index, reply); |
| } |
| |
| /* reply free queue handling */ |
| if (reply) { |
| ioc->reply_free_host_index = |
| (ioc->reply_free_host_index == |
| (ioc->reply_free_queue_depth - 1)) ? |
| 0 : ioc->reply_free_host_index + 1; |
| ioc->reply_free[ioc->reply_free_host_index] = |
| cpu_to_le32(reply); |
| if (ioc->is_mcpu_endpoint) |
| _base_clone_reply_to_sys_mem(ioc, |
| reply, |
| ioc->reply_free_host_index); |
| writel(ioc->reply_free_host_index, |
| &ioc->chip->ReplyFreeHostIndex); |
| } |
| } |
| |
| rpf->Words = cpu_to_le64(ULLONG_MAX); |
| reply_q->reply_post_host_index = |
| (reply_q->reply_post_host_index == |
| (ioc->reply_post_queue_depth - 1)) ? 0 : |
| reply_q->reply_post_host_index + 1; |
| request_descript_type = |
| reply_q->reply_post_free[reply_q->reply_post_host_index]. |
| Default.ReplyFlags & MPI2_RPY_DESCRIPT_FLAGS_TYPE_MASK; |
| completed_cmds++; |
| /* Update the reply post host index after continuously |
| * processing the threshold number of Reply Descriptors. |
| * So that FW can find enough entries to post the Reply |
| * Descriptors in the reply descriptor post queue. |
| */ |
| if (completed_cmds >= ioc->thresh_hold) { |
| if (ioc->combined_reply_queue) { |
| writel(reply_q->reply_post_host_index | |
| ((msix_index & 7) << |
| MPI2_RPHI_MSIX_INDEX_SHIFT), |
| ioc->replyPostRegisterIndex[msix_index/8]); |
| } else { |
| writel(reply_q->reply_post_host_index | |
| (msix_index << |
| MPI2_RPHI_MSIX_INDEX_SHIFT), |
| &ioc->chip->ReplyPostHostIndex); |
| } |
| if (!reply_q->irq_poll_scheduled) { |
| reply_q->irq_poll_scheduled = true; |
| irq_poll_sched(&reply_q->irqpoll); |
| } |
| atomic_dec(&reply_q->busy); |
| return completed_cmds; |
| } |
| if (request_descript_type == MPI2_RPY_DESCRIPT_FLAGS_UNUSED) |
| goto out; |
| if (!reply_q->reply_post_host_index) |
| rpf = reply_q->reply_post_free; |
| else |
| rpf++; |
| } while (1); |
| |
| out: |
| |
| if (!completed_cmds) { |
| atomic_dec(&reply_q->busy); |
| return completed_cmds; |
| } |
| |
| if (ioc->is_warpdrive) { |
| writel(reply_q->reply_post_host_index, |
| ioc->reply_post_host_index[msix_index]); |
| atomic_dec(&reply_q->busy); |
| return completed_cmds; |
| } |
| |
| /* Update Reply Post Host Index. |
| * For those HBA's which support combined reply queue feature |
| * 1. Get the correct Supplemental Reply Post Host Index Register. |
| * i.e. (msix_index / 8)th entry from Supplemental Reply Post Host |
| * Index Register address bank i.e replyPostRegisterIndex[], |
| * 2. Then update this register with new reply host index value |
| * in ReplyPostIndex field and the MSIxIndex field with |
| * msix_index value reduced to a value between 0 and 7, |
| * using a modulo 8 operation. Since each Supplemental Reply Post |
| * Host Index Register supports 8 MSI-X vectors. |
| * |
| * For other HBA's just update the Reply Post Host Index register with |
| * new reply host index value in ReplyPostIndex Field and msix_index |
| * value in MSIxIndex field. |
| */ |
| if (ioc->combined_reply_queue) |
| writel(reply_q->reply_post_host_index | ((msix_index & 7) << |
| MPI2_RPHI_MSIX_INDEX_SHIFT), |
| ioc->replyPostRegisterIndex[msix_index/8]); |
| else |
| writel(reply_q->reply_post_host_index | (msix_index << |
| MPI2_RPHI_MSIX_INDEX_SHIFT), |
| &ioc->chip->ReplyPostHostIndex); |
| atomic_dec(&reply_q->busy); |
| return completed_cmds; |
| } |
| |
| /** |
| * _base_interrupt - MPT adapter (IOC) specific interrupt handler. |
| * @irq: irq number (not used) |
| * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure |
| * |
| * Return: IRQ_HANDLED if processed, else IRQ_NONE. |
| */ |
| static irqreturn_t |
| _base_interrupt(int irq, void *bus_id) |
| { |
| struct adapter_reply_queue *reply_q = bus_id; |
| struct MPT3SAS_ADAPTER *ioc = reply_q->ioc; |
| |
| if (ioc->mask_interrupts) |
| return IRQ_NONE; |
| if (reply_q->irq_poll_scheduled) |
| return IRQ_HANDLED; |
| return ((_base_process_reply_queue(reply_q) > 0) ? |
| IRQ_HANDLED : IRQ_NONE); |
| } |
| |
| /** |
| * _base_irqpoll - IRQ poll callback handler |
| * @irqpoll: irq_poll object |
| * @budget: irq poll weight |
| * |
| * returns number of reply descriptors processed |
| */ |
| static int |
| _base_irqpoll(struct irq_poll *irqpoll, int budget) |
| { |
| struct adapter_reply_queue *reply_q; |
| int num_entries = 0; |
| |
| reply_q = container_of(irqpoll, struct adapter_reply_queue, |
| irqpoll); |
| if (reply_q->irq_line_enable) { |
| disable_irq_nosync(reply_q->os_irq); |
| reply_q->irq_line_enable = false; |
| } |
| num_entries = _base_process_reply_queue(reply_q); |
| if (num_entries < budget) { |
| irq_poll_complete(irqpoll); |
| reply_q->irq_poll_scheduled = false; |
| reply_q->irq_line_enable = true; |
| enable_irq(reply_q->os_irq); |
| /* |
| * Go for one more round of processing the |
| * reply descriptor post queue incase if HBA |
| * Firmware has posted some reply descriptors |
| * while reenabling the IRQ. |
| */ |
| _base_process_reply_queue(reply_q); |
| } |
| |
| return num_entries; |
| } |
| |
| /** |
| * _base_init_irqpolls - initliaze IRQ polls |
| * @ioc: per adapter object |
| * |
| * returns nothing |
| */ |
| static void |
| _base_init_irqpolls(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct adapter_reply_queue *reply_q, *next; |
| |
| if (list_empty(&ioc->reply_queue_list)) |
| return; |
| |
| list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { |
| irq_poll_init(&reply_q->irqpoll, |
| ioc->hba_queue_depth/4, _base_irqpoll); |
| reply_q->irq_poll_scheduled = false; |
| reply_q->irq_line_enable = true; |
| reply_q->os_irq = pci_irq_vector(ioc->pdev, |
| reply_q->msix_index); |
| } |
| } |
| |
| /** |
| * _base_is_controller_msix_enabled - is controller support muli-reply queues |
| * @ioc: per adapter object |
| * |
| * Return: Whether or not MSI/X is enabled. |
| */ |
| static inline int |
| _base_is_controller_msix_enabled(struct MPT3SAS_ADAPTER *ioc) |
| { |
| return (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable; |
| } |
| |
| /** |
| * mpt3sas_base_sync_reply_irqs - flush pending MSIX interrupts |
| * @ioc: per adapter object |
| * @poll: poll over reply descriptor pools incase interrupt for |
| * timed-out SCSI command got delayed |
| * Context: non ISR conext |
| * |
| * Called when a Task Management request has completed. |
| */ |
| void |
| mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc, u8 poll) |
| { |
| struct adapter_reply_queue *reply_q; |
| |
| /* If MSIX capability is turned off |
| * then multi-queues are not enabled |
| */ |
| if (!_base_is_controller_msix_enabled(ioc)) |
| return; |
| |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { |
| if (ioc->shost_recovery || ioc->remove_host || |
| ioc->pci_error_recovery) |
| return; |
| /* TMs are on msix_index == 0 */ |
| if (reply_q->msix_index == 0) |
| continue; |
| synchronize_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index)); |
| if (reply_q->irq_poll_scheduled) { |
| /* Calling irq_poll_disable will wait for any pending |
| * callbacks to have completed. |
| */ |
| irq_poll_disable(&reply_q->irqpoll); |
| irq_poll_enable(&reply_q->irqpoll); |
| /* check how the scheduled poll has ended, |
| * clean up only if necessary |
| */ |
| if (reply_q->irq_poll_scheduled) { |
| reply_q->irq_poll_scheduled = false; |
| reply_q->irq_line_enable = true; |
| enable_irq(reply_q->os_irq); |
| } |
| } |
| |
| if (poll) |
| _base_process_reply_queue(reply_q); |
| } |
| } |
| |
| /** |
| * mpt3sas_base_release_callback_handler - clear interrupt callback handler |
| * @cb_idx: callback index |
| */ |
| void |
| mpt3sas_base_release_callback_handler(u8 cb_idx) |
| { |
| mpt_callbacks[cb_idx] = NULL; |
| } |
| |
| /** |
| * mpt3sas_base_register_callback_handler - obtain index for the interrupt callback handler |
| * @cb_func: callback function |
| * |
| * Return: Index of @cb_func. |
| */ |
| u8 |
| mpt3sas_base_register_callback_handler(MPT_CALLBACK cb_func) |
| { |
| u8 cb_idx; |
| |
| for (cb_idx = MPT_MAX_CALLBACKS-1; cb_idx; cb_idx--) |
| if (mpt_callbacks[cb_idx] == NULL) |
| break; |
| |
| mpt_callbacks[cb_idx] = cb_func; |
| return cb_idx; |
| } |
| |
| /** |
| * mpt3sas_base_initialize_callback_handler - initialize the interrupt callback handler |
| */ |
| void |
| mpt3sas_base_initialize_callback_handler(void) |
| { |
| u8 cb_idx; |
| |
| for (cb_idx = 0; cb_idx < MPT_MAX_CALLBACKS; cb_idx++) |
| mpt3sas_base_release_callback_handler(cb_idx); |
| } |
| |
| |
| /** |
| * _base_build_zero_len_sge - build zero length sg entry |
| * @ioc: per adapter object |
| * @paddr: virtual address for SGE |
| * |
| * Create a zero length scatter gather entry to insure the IOCs hardware has |
| * something to use if the target device goes brain dead and tries |
| * to send data even when none is asked for. |
| */ |
| static void |
| _base_build_zero_len_sge(struct MPT3SAS_ADAPTER *ioc, void *paddr) |
| { |
| u32 flags_length = (u32)((MPI2_SGE_FLAGS_LAST_ELEMENT | |
| MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST | |
| MPI2_SGE_FLAGS_SIMPLE_ELEMENT) << |
| MPI2_SGE_FLAGS_SHIFT); |
| ioc->base_add_sg_single(paddr, flags_length, -1); |
| } |
| |
| /** |
| * _base_add_sg_single_32 - Place a simple 32 bit SGE at address pAddr. |
| * @paddr: virtual address for SGE |
| * @flags_length: SGE flags and data transfer length |
| * @dma_addr: Physical address |
| */ |
| static void |
| _base_add_sg_single_32(void *paddr, u32 flags_length, dma_addr_t dma_addr) |
| { |
| Mpi2SGESimple32_t *sgel = paddr; |
| |
| flags_length |= (MPI2_SGE_FLAGS_32_BIT_ADDRESSING | |
| MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; |
| sgel->FlagsLength = cpu_to_le32(flags_length); |
| sgel->Address = cpu_to_le32(dma_addr); |
| } |
| |
| |
| /** |
| * _base_add_sg_single_64 - Place a simple 64 bit SGE at address pAddr. |
| * @paddr: virtual address for SGE |
| * @flags_length: SGE flags and data transfer length |
| * @dma_addr: Physical address |
| */ |
| static void |
| _base_add_sg_single_64(void *paddr, u32 flags_length, dma_addr_t dma_addr) |
| { |
| Mpi2SGESimple64_t *sgel = paddr; |
| |
| flags_length |= (MPI2_SGE_FLAGS_64_BIT_ADDRESSING | |
| MPI2_SGE_FLAGS_SYSTEM_ADDRESS) << MPI2_SGE_FLAGS_SHIFT; |
| sgel->FlagsLength = cpu_to_le32(flags_length); |
| sgel->Address = cpu_to_le64(dma_addr); |
| } |
| |
| /** |
| * _base_get_chain_buffer_tracker - obtain chain tracker |
| * @ioc: per adapter object |
| * @scmd: SCSI commands of the IO request |
| * |
| * Return: chain tracker from chain_lookup table using key as |
| * smid and smid's chain_offset. |
| */ |
| static struct chain_tracker * |
| _base_get_chain_buffer_tracker(struct MPT3SAS_ADAPTER *ioc, |
| struct scsi_cmnd *scmd) |
| { |
| struct chain_tracker *chain_req; |
| struct scsiio_tracker *st = scsi_cmd_priv(scmd); |
| u16 smid = st->smid; |
| u8 chain_offset = |
| atomic_read(&ioc->chain_lookup[smid - 1].chain_offset); |
| |
| if (chain_offset == ioc->chains_needed_per_io) |
| return NULL; |
| |
| chain_req = &ioc->chain_lookup[smid - 1].chains_per_smid[chain_offset]; |
| atomic_inc(&ioc->chain_lookup[smid - 1].chain_offset); |
| return chain_req; |
| } |
| |
| |
| /** |
| * _base_build_sg - build generic sg |
| * @ioc: per adapter object |
| * @psge: virtual address for SGE |
| * @data_out_dma: physical address for WRITES |
| * @data_out_sz: data xfer size for WRITES |
| * @data_in_dma: physical address for READS |
| * @data_in_sz: data xfer size for READS |
| */ |
| static void |
| _base_build_sg(struct MPT3SAS_ADAPTER *ioc, void *psge, |
| dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma, |
| size_t data_in_sz) |
| { |
| u32 sgl_flags; |
| |
| if (!data_out_sz && !data_in_sz) { |
| _base_build_zero_len_sge(ioc, psge); |
| return; |
| } |
| |
| if (data_out_sz && data_in_sz) { |
| /* WRITE sgel first */ |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_HOST_TO_IOC); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_out_sz, data_out_dma); |
| |
| /* incr sgel */ |
| psge += ioc->sge_size; |
| |
| /* READ sgel last */ |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | |
| MPI2_SGE_FLAGS_END_OF_LIST); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_in_sz, data_in_dma); |
| } else if (data_out_sz) /* WRITE */ { |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | |
| MPI2_SGE_FLAGS_END_OF_LIST | MPI2_SGE_FLAGS_HOST_TO_IOC); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_out_sz, data_out_dma); |
| } else if (data_in_sz) /* READ */ { |
| sgl_flags = (MPI2_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_SGE_FLAGS_LAST_ELEMENT | MPI2_SGE_FLAGS_END_OF_BUFFER | |
| MPI2_SGE_FLAGS_END_OF_LIST); |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| ioc->base_add_sg_single(psge, sgl_flags | |
| data_in_sz, data_in_dma); |
| } |
| } |
| |
| /* IEEE format sgls */ |
| |
| /** |
| * _base_build_nvme_prp - This function is called for NVMe end devices to build |
| * a native SGL (NVMe PRP). The native SGL is built starting in the first PRP |
| * entry of the NVMe message (PRP1). If the data buffer is small enough to be |
| * described entirely using PRP1, then PRP2 is not used. If needed, PRP2 is |
| * used to describe a larger data buffer. If the data buffer is too large to |
| * describe using the two PRP entriess inside the NVMe message, then PRP1 |
| * describes the first data memory segment, and PRP2 contains a pointer to a PRP |
| * list located elsewhere in memory to describe the remaining data memory |
| * segments. The PRP list will be contiguous. |
| * |
| * The native SGL for NVMe devices is a Physical Region Page (PRP). A PRP |
| * consists of a list of PRP entries to describe a number of noncontigous |
| * physical memory segments as a single memory buffer, just as a SGL does. Note |
| * however, that this function is only used by the IOCTL call, so the memory |
| * given will be guaranteed to be contiguous. There is no need to translate |
| * non-contiguous SGL into a PRP in this case. All PRPs will describe |
| * contiguous space that is one page size each. |
| * |
| * Each NVMe message contains two PRP entries. The first (PRP1) either contains |
| * a PRP list pointer or a PRP element, depending upon the command. PRP2 |
| * contains the second PRP element if the memory being described fits within 2 |
| * PRP entries, or a PRP list pointer if the PRP spans more than two entries. |
| * |
| * A PRP list pointer contains the address of a PRP list, structured as a linear |
| * array of PRP entries. Each PRP entry in this list describes a segment of |
| * physical memory. |
| * |
| * Each 64-bit PRP entry comprises an address and an offset field. The address |
| * always points at the beginning of a 4KB physical memory page, and the offset |
| * describes where within that 4KB page the memory segment begins. Only the |
| * first element in a PRP list may contain a non-zero offest, implying that all |
| * memory segments following the first begin at the start of a 4KB page. |
| * |
| * Each PRP element normally describes 4KB of physical memory, with exceptions |
| * for the first and last elements in the list. If the memory being described |
| * by the list begins at a non-zero offset within the first 4KB page, then the |
| * first PRP element will contain a non-zero offset indicating where the region |
| * begins within the 4KB page. The last memory segment may end before the end |
| * of the 4KB segment, depending upon the overall size of the memory being |
| * described by the PRP list. |
| * |
| * Since PRP entries lack any indication of size, the overall data buffer length |
| * is used to determine where the end of the data memory buffer is located, and |
| * how many PRP entries are required to describe it. |
| * |
| * @ioc: per adapter object |
| * @smid: system request message index for getting asscociated SGL |
| * @nvme_encap_request: the NVMe request msg frame pointer |
| * @data_out_dma: physical address for WRITES |
| * @data_out_sz: data xfer size for WRITES |
| * @data_in_dma: physical address for READS |
| * @data_in_sz: data xfer size for READS |
| */ |
| static void |
| _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid, |
| Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request, |
| dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma, |
| size_t data_in_sz) |
| { |
| int prp_size = NVME_PRP_SIZE; |
| __le64 *prp_entry, *prp1_entry, *prp2_entry; |
| __le64 *prp_page; |
| dma_addr_t prp_entry_dma, prp_page_dma, dma_addr; |
| u32 offset, entry_len; |
| u32 page_mask_result, page_mask; |
| size_t length; |
| struct mpt3sas_nvme_cmd *nvme_cmd = |
| (void *)nvme_encap_request->NVMe_Command; |
| |
| /* |
| * Not all commands require a data transfer. If no data, just return |
| * without constructing any PRP. |
| */ |
| if (!data_in_sz && !data_out_sz) |
| return; |
| prp1_entry = &nvme_cmd->prp1; |
| prp2_entry = &nvme_cmd->prp2; |
| prp_entry = prp1_entry; |
| /* |
| * For the PRP entries, use the specially allocated buffer of |
| * contiguous memory. |
| */ |
| prp_page = (__le64 *)mpt3sas_base_get_pcie_sgl(ioc, smid); |
| prp_page_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid); |
| |
| /* |
| * Check if we are within 1 entry of a page boundary we don't |
| * want our first entry to be a PRP List entry. |
| */ |
| page_mask = ioc->page_size - 1; |
| page_mask_result = (uintptr_t)((u8 *)prp_page + prp_size) & page_mask; |
| if (!page_mask_result) { |
| /* Bump up to next page boundary. */ |
| prp_page = (__le64 *)((u8 *)prp_page + prp_size); |
| prp_page_dma = prp_page_dma + prp_size; |
| } |
| |
| /* |
| * Set PRP physical pointer, which initially points to the current PRP |
| * DMA memory page. |
| */ |
| prp_entry_dma = prp_page_dma; |
| |
| /* Get physical address and length of the data buffer. */ |
| if (data_in_sz) { |
| dma_addr = data_in_dma; |
| length = data_in_sz; |
| } else { |
| dma_addr = data_out_dma; |
| length = data_out_sz; |
| } |
| |
| /* Loop while the length is not zero. */ |
| while (length) { |
| /* |
| * Check if we need to put a list pointer here if we are at |
| * page boundary - prp_size (8 bytes). |
| */ |
| page_mask_result = (prp_entry_dma + prp_size) & page_mask; |
| if (!page_mask_result) { |
| /* |
| * This is the last entry in a PRP List, so we need to |
| * put a PRP list pointer here. What this does is: |
| * - bump the current memory pointer to the next |
| * address, which will be the next full page. |
| * - set the PRP Entry to point to that page. This |
| * is now the PRP List pointer. |
| * - bump the PRP Entry pointer the start of the |
| * next page. Since all of this PRP memory is |
| * contiguous, no need to get a new page - it's |
| * just the next address. |
| */ |
| prp_entry_dma++; |
| *prp_entry = cpu_to_le64(prp_entry_dma); |
| prp_entry++; |
| } |
| |
| /* Need to handle if entry will be part of a page. */ |
| offset = dma_addr & page_mask; |
| entry_len = ioc->page_size - offset; |
| |
| if (prp_entry == prp1_entry) { |
| /* |
| * Must fill in the first PRP pointer (PRP1) before |
| * moving on. |
| */ |
| *prp1_entry = cpu_to_le64(dma_addr); |
| |
| /* |
| * Now point to the second PRP entry within the |
| * command (PRP2). |
| */ |
| prp_entry = prp2_entry; |
| } else if (prp_entry == prp2_entry) { |
| /* |
| * Should the PRP2 entry be a PRP List pointer or just |
| * a regular PRP pointer? If there is more than one |
| * more page of data, must use a PRP List pointer. |
| */ |
| if (length > ioc->page_size) { |
| /* |
| * PRP2 will contain a PRP List pointer because |
| * more PRP's are needed with this command. The |
| * list will start at the beginning of the |
| * contiguous buffer. |
| */ |
| *prp2_entry = cpu_to_le64(prp_entry_dma); |
| |
| /* |
| * The next PRP Entry will be the start of the |
| * first PRP List. |
| */ |
| prp_entry = prp_page; |
| } else { |
| /* |
| * After this, the PRP Entries are complete. |
| * This command uses 2 PRP's and no PRP list. |
| */ |
| *prp2_entry = cpu_to_le64(dma_addr); |
| } |
| } else { |
| /* |
| * Put entry in list and bump the addresses. |
| * |
| * After PRP1 and PRP2 are filled in, this will fill in |
| * all remaining PRP entries in a PRP List, one per |
| * each time through the loop. |
| */ |
| *prp_entry = cpu_to_le64(dma_addr); |
| prp_entry++; |
| prp_entry_dma++; |
| } |
| |
| /* |
| * Bump the phys address of the command's data buffer by the |
| * entry_len. |
| */ |
| dma_addr += entry_len; |
| |
| /* Decrement length accounting for last partial page. */ |
| if (entry_len > length) |
| length = 0; |
| else |
| length -= entry_len; |
| } |
| } |
| |
| /** |
| * base_make_prp_nvme - |
| * Prepare PRPs(Physical Region Page)- SGLs specific to NVMe drives only |
| * |
| * @ioc: per adapter object |
| * @scmd: SCSI command from the mid-layer |
| * @mpi_request: mpi request |
| * @smid: msg Index |
| * @sge_count: scatter gather element count. |
| * |
| * Return: true: PRPs are built |
| * false: IEEE SGLs needs to be built |
| */ |
| static void |
| base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc, |
| struct scsi_cmnd *scmd, |
| Mpi25SCSIIORequest_t *mpi_request, |
| u16 smid, int sge_count) |
| { |
| int sge_len, num_prp_in_chain = 0; |
| Mpi25IeeeSgeChain64_t *main_chain_element, *ptr_first_sgl; |
| __le64 *curr_buff; |
| dma_addr_t msg_dma, sge_addr, offset; |
| u32 page_mask, page_mask_result; |
| struct scatterlist *sg_scmd; |
| u32 first_prp_len; |
| int data_len = scsi_bufflen(scmd); |
| u32 nvme_pg_size; |
| |
| nvme_pg_size = max_t(u32, ioc->page_size, NVME_PRP_PAGE_SIZE); |
| /* |
| * Nvme has a very convoluted prp format. One prp is required |
| * for each page or partial page. Driver need to split up OS sg_list |
| * entries if it is longer than one page or cross a page |
| * boundary. Driver also have to insert a PRP list pointer entry as |
| * the last entry in each physical page of the PRP list. |
| * |
| * NOTE: The first PRP "entry" is actually placed in the first |
| * SGL entry in the main message as IEEE 64 format. The 2nd |
| * entry in the main message is the chain element, and the rest |
| * of the PRP entries are built in the contiguous pcie buffer. |
| */ |
| page_mask = nvme_pg_size - 1; |
| |
| /* |
| * Native SGL is needed. |
| * Put a chain element in main message frame that points to the first |
| * chain buffer. |
| * |
| * NOTE: The ChainOffset field must be 0 when using a chain pointer to |
| * a native SGL. |
| */ |
| |
| /* Set main message chain element pointer */ |
| main_chain_element = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL; |
| /* |
| * For NVMe the chain element needs to be the 2nd SG entry in the main |
| * message. |
| */ |
| main_chain_element = (Mpi25IeeeSgeChain64_t *) |
| ((u8 *)main_chain_element + sizeof(MPI25_IEEE_SGE_CHAIN64)); |
| |
| /* |
| * For the PRP entries, use the specially allocated buffer of |
| * contiguous memory. Normal chain buffers can't be used |
| * because each chain buffer would need to be the size of an OS |
| * page (4k). |
| */ |
| curr_buff = mpt3sas_base_get_pcie_sgl(ioc, smid); |
| msg_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid); |
| |
| main_chain_element->Address = cpu_to_le64(msg_dma); |
| main_chain_element->NextChainOffset = 0; |
| main_chain_element->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR | |
| MPI26_IEEE_SGE_FLAGS_NSF_NVME_PRP; |
| |
| /* Build first prp, sge need not to be page aligned*/ |
| ptr_first_sgl = (pMpi25IeeeSgeChain64_t)&mpi_request->SGL; |
| sg_scmd = scsi_sglist(scmd); |
| sge_addr = sg_dma_address(sg_scmd); |
| sge_len = sg_dma_len(sg_scmd); |
| |
| offset = sge_addr & page_mask; |
| first_prp_len = nvme_pg_size - offset; |
| |
| ptr_first_sgl->Address = cpu_to_le64(sge_addr); |
| ptr_first_sgl->Length = cpu_to_le32(first_prp_len); |
| |
| data_len -= first_prp_len; |
| |
| if (sge_len > first_prp_len) { |
| sge_addr += first_prp_len; |
| sge_len -= first_prp_len; |
| } else if (data_len && (sge_len == first_prp_len)) { |
| sg_scmd = sg_next(sg_scmd); |
| sge_addr = sg_dma_address(sg_scmd); |
| sge_len = sg_dma_len(sg_scmd); |
| } |
| |
| for (;;) { |
| offset = sge_addr & page_mask; |
| |
| /* Put PRP pointer due to page boundary*/ |
| page_mask_result = (uintptr_t)(curr_buff + 1) & page_mask; |
| if (unlikely(!page_mask_result)) { |
| scmd_printk(KERN_NOTICE, |
| scmd, "page boundary curr_buff: 0x%p\n", |
| curr_buff); |
| msg_dma += 8; |
| *curr_buff = cpu_to_le64(msg_dma); |
| curr_buff++; |
| num_prp_in_chain++; |
| } |
| |
| *curr_buff = cpu_to_le64(sge_addr); |
| curr_buff++; |
| msg_dma += 8; |
| num_prp_in_chain++; |
| |
| sge_addr += nvme_pg_size; |
| sge_len -= nvme_pg_size; |
| data_len -= nvme_pg_size; |
| |
| if (data_len <= 0) |
| break; |
| |
| if (sge_len > 0) |
| continue; |
| |
| sg_scmd = sg_next(sg_scmd); |
| sge_addr = sg_dma_address(sg_scmd); |
| sge_len = sg_dma_len(sg_scmd); |
| } |
| |
| main_chain_element->Length = |
| cpu_to_le32(num_prp_in_chain * sizeof(u64)); |
| return; |
| } |
| |
| static bool |
| base_is_prp_possible(struct MPT3SAS_ADAPTER *ioc, |
| struct _pcie_device *pcie_device, struct scsi_cmnd *scmd, int sge_count) |
| { |
| u32 data_length = 0; |
| bool build_prp = true; |
| |
| data_length = scsi_bufflen(scmd); |
| if (pcie_device && |
| (mpt3sas_scsih_is_pcie_scsi_device(pcie_device->device_info))) { |
| build_prp = false; |
| return build_prp; |
| } |
| |
| /* If Datalenth is <= 16K and number of SGE’s entries are <= 2 |
| * we built IEEE SGL |
| */ |
| if ((data_length <= NVME_PRP_PAGE_SIZE*4) && (sge_count <= 2)) |
| build_prp = false; |
| |
| return build_prp; |
| } |
| |
| /** |
| * _base_check_pcie_native_sgl - This function is called for PCIe end devices to |
| * determine if the driver needs to build a native SGL. If so, that native |
| * SGL is built in the special contiguous buffers allocated especially for |
| * PCIe SGL creation. If the driver will not build a native SGL, return |
| * TRUE and a normal IEEE SGL will be built. Currently this routine |
| * supports NVMe. |
| * @ioc: per adapter object |
| * @mpi_request: mf request pointer |
| * @smid: system request message index |
| * @scmd: scsi command |
| * @pcie_device: points to the PCIe device's info |
| * |
| * Return: 0 if native SGL was built, 1 if no SGL was built |
| */ |
| static int |
| _base_check_pcie_native_sgl(struct MPT3SAS_ADAPTER *ioc, |
| Mpi25SCSIIORequest_t *mpi_request, u16 smid, struct scsi_cmnd *scmd, |
| struct _pcie_device *pcie_device) |
| { |
| int sges_left; |
| |
| /* Get the SG list pointer and info. */ |
| sges_left = scsi_dma_map(scmd); |
| if (sges_left < 0) { |
| sdev_printk(KERN_ERR, scmd->device, |
| "scsi_dma_map failed: request for %d bytes!\n", |
| scsi_bufflen(scmd)); |
| return 1; |
| } |
| |
| /* Check if we need to build a native SG list. */ |
| if (base_is_prp_possible(ioc, pcie_device, |
| scmd, sges_left) == 0) { |
| /* We built a native SG list, just return. */ |
| goto out; |
| } |
| |
| /* |
| * Build native NVMe PRP. |
| */ |
| base_make_prp_nvme(ioc, scmd, mpi_request, |
| smid, sges_left); |
| |
| return 0; |
| out: |
| scsi_dma_unmap(scmd); |
| return 1; |
| } |
| |
| /** |
| * _base_add_sg_single_ieee - add sg element for IEEE format |
| * @paddr: virtual address for SGE |
| * @flags: SGE flags |
| * @chain_offset: number of 128 byte elements from start of segment |
| * @length: data transfer length |
| * @dma_addr: Physical address |
| */ |
| static void |
| _base_add_sg_single_ieee(void *paddr, u8 flags, u8 chain_offset, u32 length, |
| dma_addr_t dma_addr) |
| { |
| Mpi25IeeeSgeChain64_t *sgel = paddr; |
| |
| sgel->Flags = flags; |
| sgel->NextChainOffset = chain_offset; |
| sgel->Length = cpu_to_le32(length); |
| sgel->Address = cpu_to_le64(dma_addr); |
| } |
| |
| /** |
| * _base_build_zero_len_sge_ieee - build zero length sg entry for IEEE format |
| * @ioc: per adapter object |
| * @paddr: virtual address for SGE |
| * |
| * Create a zero length scatter gather entry to insure the IOCs hardware has |
| * something to use if the target device goes brain dead and tries |
| * to send data even when none is asked for. |
| */ |
| static void |
| _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr) |
| { |
| u8 sgl_flags = (MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR | |
| MPI25_IEEE_SGE_FLAGS_END_OF_LIST); |
| |
| _base_add_sg_single_ieee(paddr, sgl_flags, 0, 0, -1); |
| } |
| |
| /** |
| * _base_build_sg_scmd - main sg creation routine |
| * pcie_device is unused here! |
| * @ioc: per adapter object |
| * @scmd: scsi command |
| * @smid: system request message index |
| * @unused: unused pcie_device pointer |
| * Context: none. |
| * |
| * The main routine that builds scatter gather table from a given |
| * scsi request sent via the .queuecommand main handler. |
| * |
| * Return: 0 success, anything else error |
| */ |
| static int |
| _base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc, |
| struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *unused) |
| { |
| Mpi2SCSIIORequest_t *mpi_request; |
| dma_addr_t chain_dma; |
| struct scatterlist *sg_scmd; |
| void *sg_local, *chain; |
| u32 chain_offset; |
| u32 chain_length; |
| u32 chain_flags; |
| int sges_left; |
| u32 sges_in_segment; |
| u32 sgl_flags; |
| u32 sgl_flags_last_element; |
| u32 sgl_flags_end_buffer; |
| struct chain_tracker *chain_req; |
| |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| |
| /* init scatter gather flags */ |
| sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT; |
| if (scmd->sc_data_direction == DMA_TO_DEVICE) |
| sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC; |
| sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT) |
| << MPI2_SGE_FLAGS_SHIFT; |
| sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT | |
| MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST) |
| << MPI2_SGE_FLAGS_SHIFT; |
| sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; |
| |
| sg_scmd = scsi_sglist(scmd); |
| sges_left = scsi_dma_map(scmd); |
| if (sges_left < 0) { |
| sdev_printk(KERN_ERR, scmd->device, |
| "scsi_dma_map failed: request for %d bytes!\n", |
| scsi_bufflen(scmd)); |
| return -ENOMEM; |
| } |
| |
| sg_local = &mpi_request->SGL; |
| sges_in_segment = ioc->max_sges_in_main_message; |
| if (sges_left <= sges_in_segment) |
| goto fill_in_last_segment; |
| |
| mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) + |
| (sges_in_segment * ioc->sge_size))/4; |
| |
| /* fill in main message segment when there is a chain following */ |
| while (sges_in_segment) { |
| if (sges_in_segment == 1) |
| ioc->base_add_sg_single(sg_local, |
| sgl_flags_last_element | sg_dma_len(sg_scmd), |
| sg_dma_address(sg_scmd)); |
| else |
| ioc->base_add_sg_single(sg_local, sgl_flags | |
| sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); |
| sg_scmd = sg_next(sg_scmd); |
| sg_local += ioc->sge_size; |
| sges_left--; |
| sges_in_segment--; |
| } |
| |
| /* initializing the chain flags and pointers */ |
| chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT; |
| chain_req = _base_get_chain_buffer_tracker(ioc, scmd); |
| if (!chain_req) |
| return -1; |
| chain = chain_req->chain_buffer; |
| chain_dma = chain_req->chain_buffer_dma; |
| do { |
| sges_in_segment = (sges_left <= |
| ioc->max_sges_in_chain_message) ? sges_left : |
| ioc->max_sges_in_chain_message; |
| chain_offset = (sges_left == sges_in_segment) ? |
| 0 : (sges_in_segment * ioc->sge_size)/4; |
| chain_length = sges_in_segment * ioc->sge_size; |
| if (chain_offset) { |
| chain_offset = chain_offset << |
| MPI2_SGE_CHAIN_OFFSET_SHIFT; |
| chain_length += ioc->sge_size; |
| } |
| ioc->base_add_sg_single(sg_local, chain_flags | chain_offset | |
| chain_length, chain_dma); |
| sg_local = chain; |
| if (!chain_offset) |
| goto fill_in_last_segment; |
| |
| /* fill in chain segments */ |
| while (sges_in_segment) { |
| if (sges_in_segment == 1) |
| ioc->base_add_sg_single(sg_local, |
| sgl_flags_last_element | |
| sg_dma_len(sg_scmd), |
| sg_dma_address(sg_scmd)); |
| else |
| ioc->base_add_sg_single(sg_local, sgl_flags | |
| sg_dma_len(sg_scmd), |
| sg_dma_address(sg_scmd)); |
| sg_scmd = sg_next(sg_scmd); |
| sg_local += ioc->sge_size; |
| sges_left--; |
| sges_in_segment--; |
| } |
| |
| chain_req = _base_get_chain_buffer_tracker(ioc, scmd); |
| if (!chain_req) |
| return -1; |
| chain = chain_req->chain_buffer; |
| chain_dma = chain_req->chain_buffer_dma; |
| } while (1); |
| |
| |
| fill_in_last_segment: |
| |
| /* fill the last segment */ |
| while (sges_left) { |
| if (sges_left == 1) |
| ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer | |
| sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); |
| else |
| ioc->base_add_sg_single(sg_local, sgl_flags | |
| sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); |
| sg_scmd = sg_next(sg_scmd); |
| sg_local += ioc->sge_size; |
| sges_left--; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format |
| * @ioc: per adapter object |
| * @scmd: scsi command |
| * @smid: system request message index |
| * @pcie_device: Pointer to pcie_device. If set, the pcie native sgl will be |
| * constructed on need. |
| * Context: none. |
| * |
| * The main routine that builds scatter gather table from a given |
| * scsi request sent via the .queuecommand main handler. |
| * |
| * Return: 0 success, anything else error |
| */ |
| static int |
| _base_build_sg_scmd_ieee(struct MPT3SAS_ADAPTER *ioc, |
| struct scsi_cmnd *scmd, u16 smid, struct _pcie_device *pcie_device) |
| { |
| Mpi25SCSIIORequest_t *mpi_request; |
| dma_addr_t chain_dma; |
| struct scatterlist *sg_scmd; |
| void *sg_local, *chain; |
| u32 chain_offset; |
| u32 chain_length; |
| int sges_left; |
| u32 sges_in_segment; |
| u8 simple_sgl_flags; |
| u8 simple_sgl_flags_last; |
| u8 chain_sgl_flags; |
| struct chain_tracker *chain_req; |
| |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| |
| /* init scatter gather flags */ |
| simple_sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| simple_sgl_flags_last = simple_sgl_flags | |
| MPI25_IEEE_SGE_FLAGS_END_OF_LIST; |
| chain_sgl_flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| |
| /* Check if we need to build a native SG list. */ |
| if ((pcie_device) && (_base_check_pcie_native_sgl(ioc, mpi_request, |
| smid, scmd, pcie_device) == 0)) { |
| /* We built a native SG list, just return. */ |
| return 0; |
| } |
| |
| sg_scmd = scsi_sglist(scmd); |
| sges_left = scsi_dma_map(scmd); |
| if (sges_left < 0) { |
| sdev_printk(KERN_ERR, scmd->device, |
| "scsi_dma_map failed: request for %d bytes!\n", |
| scsi_bufflen(scmd)); |
| return -ENOMEM; |
| } |
| |
| sg_local = &mpi_request->SGL; |
| sges_in_segment = (ioc->request_sz - |
| offsetof(Mpi25SCSIIORequest_t, SGL))/ioc->sge_size_ieee; |
| if (sges_left <= sges_in_segment) |
| goto fill_in_last_segment; |
| |
| mpi_request->ChainOffset = (sges_in_segment - 1 /* chain element */) + |
| (offsetof(Mpi25SCSIIORequest_t, SGL)/ioc->sge_size_ieee); |
| |
| /* fill in main message segment when there is a chain following */ |
| while (sges_in_segment > 1) { |
| _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, |
| sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); |
| sg_scmd = sg_next(sg_scmd); |
| sg_local += ioc->sge_size_ieee; |
| sges_left--; |
| sges_in_segment--; |
| } |
| |
| /* initializing the pointers */ |
| chain_req = _base_get_chain_buffer_tracker(ioc, scmd); |
| if (!chain_req) |
| return -1; |
| chain = chain_req->chain_buffer; |
| chain_dma = chain_req->chain_buffer_dma; |
| do { |
| sges_in_segment = (sges_left <= |
| ioc->max_sges_in_chain_message) ? sges_left : |
| ioc->max_sges_in_chain_message; |
| chain_offset = (sges_left == sges_in_segment) ? |
| 0 : sges_in_segment; |
| chain_length = sges_in_segment * ioc->sge_size_ieee; |
| if (chain_offset) |
| chain_length += ioc->sge_size_ieee; |
| _base_add_sg_single_ieee(sg_local, chain_sgl_flags, |
| chain_offset, chain_length, chain_dma); |
| |
| sg_local = chain; |
| if (!chain_offset) |
| goto fill_in_last_segment; |
| |
| /* fill in chain segments */ |
| while (sges_in_segment) { |
| _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, |
| sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); |
| sg_scmd = sg_next(sg_scmd); |
| sg_local += ioc->sge_size_ieee; |
| sges_left--; |
| sges_in_segment--; |
| } |
| |
| chain_req = _base_get_chain_buffer_tracker(ioc, scmd); |
| if (!chain_req) |
| return -1; |
| chain = chain_req->chain_buffer; |
| chain_dma = chain_req->chain_buffer_dma; |
| } while (1); |
| |
| |
| fill_in_last_segment: |
| |
| /* fill the last segment */ |
| while (sges_left > 0) { |
| if (sges_left == 1) |
| _base_add_sg_single_ieee(sg_local, |
| simple_sgl_flags_last, 0, sg_dma_len(sg_scmd), |
| sg_dma_address(sg_scmd)); |
| else |
| _base_add_sg_single_ieee(sg_local, simple_sgl_flags, 0, |
| sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); |
| sg_scmd = sg_next(sg_scmd); |
| sg_local += ioc->sge_size_ieee; |
| sges_left--; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * _base_build_sg_ieee - build generic sg for IEEE format |
| * @ioc: per adapter object |
| * @psge: virtual address for SGE |
| * @data_out_dma: physical address for WRITES |
| * @data_out_sz: data xfer size for WRITES |
| * @data_in_dma: physical address for READS |
| * @data_in_sz: data xfer size for READS |
| */ |
| static void |
| _base_build_sg_ieee(struct MPT3SAS_ADAPTER *ioc, void *psge, |
| dma_addr_t data_out_dma, size_t data_out_sz, dma_addr_t data_in_dma, |
| size_t data_in_sz) |
| { |
| u8 sgl_flags; |
| |
| if (!data_out_sz && !data_in_sz) { |
| _base_build_zero_len_sge_ieee(ioc, psge); |
| return; |
| } |
| |
| if (data_out_sz && data_in_sz) { |
| /* WRITE sgel first */ |
| sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz, |
| data_out_dma); |
| |
| /* incr sgel */ |
| psge += ioc->sge_size_ieee; |
| |
| /* READ sgel last */ |
| sgl_flags |= MPI25_IEEE_SGE_FLAGS_END_OF_LIST; |
| _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz, |
| data_in_dma); |
| } else if (data_out_sz) /* WRITE */ { |
| sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI25_IEEE_SGE_FLAGS_END_OF_LIST | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| _base_add_sg_single_ieee(psge, sgl_flags, 0, data_out_sz, |
| data_out_dma); |
| } else if (data_in_sz) /* READ */ { |
| sgl_flags = MPI2_IEEE_SGE_FLAGS_SIMPLE_ELEMENT | |
| MPI25_IEEE_SGE_FLAGS_END_OF_LIST | |
| MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR; |
| _base_add_sg_single_ieee(psge, sgl_flags, 0, data_in_sz, |
| data_in_dma); |
| } |
| } |
| |
| #define convert_to_kb(x) ((x) << (PAGE_SHIFT - 10)) |
| |
| /** |
| * _base_config_dma_addressing - set dma addressing |
| * @ioc: per adapter object |
| * @pdev: PCI device struct |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_config_dma_addressing(struct MPT3SAS_ADAPTER *ioc, struct pci_dev *pdev) |
| { |
| struct sysinfo s; |
| |
| if (ioc->is_mcpu_endpoint || |
| sizeof(dma_addr_t) == 4 || ioc->use_32bit_dma || |
| dma_get_required_mask(&pdev->dev) <= DMA_BIT_MASK(32)) |
| ioc->dma_mask = 32; |
| /* Set 63 bit DMA mask for all SAS3 and SAS35 controllers */ |
| else if (ioc->hba_mpi_version_belonged > MPI2_VERSION) |
| ioc->dma_mask = 63; |
| else |
| ioc->dma_mask = 64; |
| |
| if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask)) || |
| dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(ioc->dma_mask))) |
| return -ENODEV; |
| |
| if (ioc->dma_mask > 32) { |
| ioc->base_add_sg_single = &_base_add_sg_single_64; |
| ioc->sge_size = sizeof(Mpi2SGESimple64_t); |
| } else { |
| ioc->base_add_sg_single = &_base_add_sg_single_32; |
| ioc->sge_size = sizeof(Mpi2SGESimple32_t); |
| } |
| |
| si_meminfo(&s); |
| ioc_info(ioc, "%d BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (%ld kB)\n", |
| ioc->dma_mask, convert_to_kb(s.totalram)); |
| |
| return 0; |
| } |
| |
| /** |
| * _base_check_enable_msix - checks MSIX capabable. |
| * @ioc: per adapter object |
| * |
| * Check to see if card is capable of MSIX, and set number |
| * of available msix vectors |
| */ |
| static int |
| _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int base; |
| u16 message_control; |
| |
| /* Check whether controller SAS2008 B0 controller, |
| * if it is SAS2008 B0 controller use IO-APIC instead of MSIX |
| */ |
| if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 && |
| ioc->pdev->revision == SAS2_PCI_DEVICE_B0_REVISION) { |
| return -EINVAL; |
| } |
| |
| base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); |
| if (!base) { |
| dfailprintk(ioc, ioc_info(ioc, "msix not supported\n")); |
| return -EINVAL; |
| } |
| |
| /* get msix vector count */ |
| /* NUMA_IO not supported for older controllers */ |
| if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 || |
| ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 || |
| ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 || |
| ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 || |
| ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 || |
| ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 || |
| ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2) |
| ioc->msix_vector_count = 1; |
| else { |
| pci_read_config_word(ioc->pdev, base + 2, &message_control); |
| ioc->msix_vector_count = (message_control & 0x3FF) + 1; |
| } |
| dinitprintk(ioc, ioc_info(ioc, "msix is supported, vector_count(%d)\n", |
| ioc->msix_vector_count)); |
| return 0; |
| } |
| |
| /** |
| * _base_free_irq - free irq |
| * @ioc: per adapter object |
| * |
| * Freeing respective reply_queue from the list. |
| */ |
| static void |
| _base_free_irq(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct adapter_reply_queue *reply_q, *next; |
| |
| if (list_empty(&ioc->reply_queue_list)) |
| return; |
| |
| list_for_each_entry_safe(reply_q, next, &ioc->reply_queue_list, list) { |
| list_del(&reply_q->list); |
| if (ioc->smp_affinity_enable) |
| irq_set_affinity_hint(pci_irq_vector(ioc->pdev, |
| reply_q->msix_index), NULL); |
| free_irq(pci_irq_vector(ioc->pdev, reply_q->msix_index), |
| reply_q); |
| kfree(reply_q); |
| } |
| } |
| |
| /** |
| * _base_request_irq - request irq |
| * @ioc: per adapter object |
| * @index: msix index into vector table |
| * |
| * Inserting respective reply_queue into the list. |
| */ |
| static int |
| _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index) |
| { |
| struct pci_dev *pdev = ioc->pdev; |
| struct adapter_reply_queue *reply_q; |
| int r; |
| |
| reply_q = kzalloc(sizeof(struct adapter_reply_queue), GFP_KERNEL); |
| if (!reply_q) { |
| ioc_err(ioc, "unable to allocate memory %zu!\n", |
| sizeof(struct adapter_reply_queue)); |
| return -ENOMEM; |
| } |
| reply_q->ioc = ioc; |
| reply_q->msix_index = index; |
| |
| atomic_set(&reply_q->busy, 0); |
| if (ioc->msix_enable) |
| snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", |
| ioc->driver_name, ioc->id, index); |
| else |
| snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d", |
| ioc->driver_name, ioc->id); |
| r = request_irq(pci_irq_vector(pdev, index), _base_interrupt, |
| IRQF_SHARED, reply_q->name, reply_q); |
| if (r) { |
| pr_err("%s: unable to allocate interrupt %d!\n", |
| reply_q->name, pci_irq_vector(pdev, index)); |
| kfree(reply_q); |
| return -EBUSY; |
| } |
| |
| INIT_LIST_HEAD(&reply_q->list); |
| list_add_tail(&reply_q->list, &ioc->reply_queue_list); |
| return 0; |
| } |
| |
| /** |
| * _base_assign_reply_queues - assigning msix index for each cpu |
| * @ioc: per adapter object |
| * |
| * The enduser would need to set the affinity via /proc/irq/#/smp_affinity |
| * |
| * It would nice if we could call irq_set_affinity, however it is not |
| * an exported symbol |
| */ |
| static void |
| _base_assign_reply_queues(struct MPT3SAS_ADAPTER *ioc) |
| { |
| unsigned int cpu, nr_cpus, nr_msix, index = 0; |
| struct adapter_reply_queue *reply_q; |
| int local_numa_node; |
| |
| if (!_base_is_controller_msix_enabled(ioc)) |
| return; |
| |
| if (ioc->msix_load_balance) |
| return; |
| |
| memset(ioc->cpu_msix_table, 0, ioc->cpu_msix_table_sz); |
| |
| nr_cpus = num_online_cpus(); |
| nr_msix = ioc->reply_queue_count = min(ioc->reply_queue_count, |
| ioc->facts.MaxMSIxVectors); |
| if (!nr_msix) |
| return; |
| |
| if (ioc->smp_affinity_enable) { |
| |
| /* |
| * set irq affinity to local numa node for those irqs |
| * corresponding to high iops queues. |
| */ |
| if (ioc->high_iops_queues) { |
| local_numa_node = dev_to_node(&ioc->pdev->dev); |
| for (index = 0; index < ioc->high_iops_queues; |
| index++) { |
| irq_set_affinity_hint(pci_irq_vector(ioc->pdev, |
| index), cpumask_of_node(local_numa_node)); |
| } |
| } |
| |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { |
| const cpumask_t *mask; |
| |
| if (reply_q->msix_index < ioc->high_iops_queues) |
| continue; |
| |
| mask = pci_irq_get_affinity(ioc->pdev, |
| reply_q->msix_index); |
| if (!mask) { |
| ioc_warn(ioc, "no affinity for msi %x\n", |
| reply_q->msix_index); |
| goto fall_back; |
| } |
| |
| for_each_cpu_and(cpu, mask, cpu_online_mask) { |
| if (cpu >= ioc->cpu_msix_table_sz) |
| break; |
| ioc->cpu_msix_table[cpu] = reply_q->msix_index; |
| } |
| } |
| return; |
| } |
| |
| fall_back: |
| cpu = cpumask_first(cpu_online_mask); |
| nr_msix -= ioc->high_iops_queues; |
| index = 0; |
| |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { |
| unsigned int i, group = nr_cpus / nr_msix; |
| |
| if (reply_q->msix_index < ioc->high_iops_queues) |
| continue; |
| |
| if (cpu >= nr_cpus) |
| break; |
| |
| if (index < nr_cpus % nr_msix) |
| group++; |
| |
| for (i = 0 ; i < group ; i++) { |
| ioc->cpu_msix_table[cpu] = reply_q->msix_index; |
| cpu = cpumask_next(cpu, cpu_online_mask); |
| } |
| index++; |
| } |
| } |
| |
| /** |
| * _base_check_and_enable_high_iops_queues - enable high iops mode |
| * @ioc: per adapter object |
| * @hba_msix_vector_count: msix vectors supported by HBA |
| * |
| * Enable high iops queues only if |
| * - HBA is a SEA/AERO controller and |
| * - MSI-Xs vector supported by the HBA is 128 and |
| * - total CPU count in the system >=16 and |
| * - loaded driver with default max_msix_vectors module parameter and |
| * - system booted in non kdump mode |
| * |
| * returns nothing. |
| */ |
| static void |
| _base_check_and_enable_high_iops_queues(struct MPT3SAS_ADAPTER *ioc, |
| int hba_msix_vector_count) |
| { |
| u16 lnksta, speed; |
| |
| if (perf_mode == MPT_PERF_MODE_IOPS || |
| perf_mode == MPT_PERF_MODE_LATENCY) { |
| ioc->high_iops_queues = 0; |
| return; |
| } |
| |
| if (perf_mode == MPT_PERF_MODE_DEFAULT) { |
| |
| pcie_capability_read_word(ioc->pdev, PCI_EXP_LNKSTA, &lnksta); |
| speed = lnksta & PCI_EXP_LNKSTA_CLS; |
| |
| if (speed < 0x4) { |
| ioc->high_iops_queues = 0; |
| return; |
| } |
| } |
| |
| if (!reset_devices && ioc->is_aero_ioc && |
| hba_msix_vector_count == MPT3SAS_GEN35_MAX_MSIX_QUEUES && |
| num_online_cpus() >= MPT3SAS_HIGH_IOPS_REPLY_QUEUES && |
| max_msix_vectors == -1) |
| ioc->high_iops_queues = MPT3SAS_HIGH_IOPS_REPLY_QUEUES; |
| else |
| ioc->high_iops_queues = 0; |
| } |
| |
| /** |
| * _base_disable_msix - disables msix |
| * @ioc: per adapter object |
| * |
| */ |
| static void |
| _base_disable_msix(struct MPT3SAS_ADAPTER *ioc) |
| { |
| if (!ioc->msix_enable) |
| return; |
| pci_free_irq_vectors(ioc->pdev); |
| ioc->msix_enable = 0; |
| } |
| |
| /** |
| * _base_alloc_irq_vectors - allocate msix vectors |
| * @ioc: per adapter object |
| * |
| */ |
| static int |
| _base_alloc_irq_vectors(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int i, irq_flags = PCI_IRQ_MSIX; |
| struct irq_affinity desc = { .pre_vectors = ioc->high_iops_queues }; |
| struct irq_affinity *descp = &desc; |
| |
| if (ioc->smp_affinity_enable) |
| irq_flags |= PCI_IRQ_AFFINITY; |
| else |
| descp = NULL; |
| |
| ioc_info(ioc, " %d %d\n", ioc->high_iops_queues, |
| ioc->reply_queue_count); |
| |
| i = pci_alloc_irq_vectors_affinity(ioc->pdev, |
| ioc->high_iops_queues, |
| ioc->reply_queue_count, irq_flags, descp); |
| |
| return i; |
| } |
| |
| /** |
| * _base_enable_msix - enables msix, failback to io_apic |
| * @ioc: per adapter object |
| * |
| */ |
| static int |
| _base_enable_msix(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int r; |
| int i, local_max_msix_vectors; |
| u8 try_msix = 0; |
| |
| ioc->msix_load_balance = false; |
| |
| if (msix_disable == -1 || msix_disable == 0) |
| try_msix = 1; |
| |
| if (!try_msix) |
| goto try_ioapic; |
| |
| if (_base_check_enable_msix(ioc) != 0) |
| goto try_ioapic; |
| |
| ioc_info(ioc, "MSI-X vectors supported: %d\n", ioc->msix_vector_count); |
| pr_info("\t no of cores: %d, max_msix_vectors: %d\n", |
| ioc->cpu_count, max_msix_vectors); |
| if (ioc->is_aero_ioc) |
| _base_check_and_enable_high_iops_queues(ioc, |
| ioc->msix_vector_count); |
| ioc->reply_queue_count = |
| min_t(int, ioc->cpu_count + ioc->high_iops_queues, |
| ioc->msix_vector_count); |
| |
| if (!ioc->rdpq_array_enable && max_msix_vectors == -1) |
| local_max_msix_vectors = (reset_devices) ? 1 : 8; |
| else |
| local_max_msix_vectors = max_msix_vectors; |
| |
| if (local_max_msix_vectors > 0) |
| ioc->reply_queue_count = min_t(int, local_max_msix_vectors, |
| ioc->reply_queue_count); |
| else if (local_max_msix_vectors == 0) |
| goto try_ioapic; |
| |
| /* |
| * Enable msix_load_balance only if combined reply queue mode is |
| * disabled on SAS3 & above generation HBA devices. |
| */ |
| if (!ioc->combined_reply_queue && |
| ioc->hba_mpi_version_belonged != MPI2_VERSION) { |
| ioc_info(ioc, |
| "combined ReplyQueue is off, Enabling msix load balance\n"); |
| ioc->msix_load_balance = true; |
| } |
| |
| /* |
| * smp affinity setting is not need when msix load balance |
| * is enabled. |
| */ |
| if (ioc->msix_load_balance) |
| ioc->smp_affinity_enable = 0; |
| |
| r = _base_alloc_irq_vectors(ioc); |
| if (r < 0) { |
| ioc_info(ioc, "pci_alloc_irq_vectors failed (r=%d) !!!\n", r); |
| goto try_ioapic; |
| } |
| |
| ioc->msix_enable = 1; |
| ioc->reply_queue_count = r; |
| for (i = 0; i < ioc->reply_queue_count; i++) { |
| r = _base_request_irq(ioc, i); |
| if (r) { |
| _base_free_irq(ioc); |
| _base_disable_msix(ioc); |
| goto try_ioapic; |
| } |
| } |
| |
| ioc_info(ioc, "High IOPs queues : %s\n", |
| ioc->high_iops_queues ? "enabled" : "disabled"); |
| |
| return 0; |
| |
| /* failback to io_apic interrupt routing */ |
| try_ioapic: |
| ioc->high_iops_queues = 0; |
| ioc_info(ioc, "High IOPs queues : disabled\n"); |
| ioc->reply_queue_count = 1; |
| r = pci_alloc_irq_vectors(ioc->pdev, 1, 1, PCI_IRQ_LEGACY); |
| if (r < 0) { |
| dfailprintk(ioc, |
| ioc_info(ioc, "pci_alloc_irq_vector(legacy) failed (r=%d) !!!\n", |
| r)); |
| } else |
| r = _base_request_irq(ioc, 0); |
| |
| return r; |
| } |
| |
| /** |
| * mpt3sas_base_unmap_resources - free controller resources |
| * @ioc: per adapter object |
| */ |
| static void |
| mpt3sas_base_unmap_resources(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct pci_dev *pdev = ioc->pdev; |
| |
| dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| _base_free_irq(ioc); |
| _base_disable_msix(ioc); |
| |
| kfree(ioc->replyPostRegisterIndex); |
| ioc->replyPostRegisterIndex = NULL; |
| |
| |
| if (ioc->chip_phys) { |
| iounmap(ioc->chip); |
| ioc->chip_phys = 0; |
| } |
| |
| if (pci_is_enabled(pdev)) { |
| pci_release_selected_regions(ioc->pdev, ioc->bars); |
| pci_disable_pcie_error_reporting(pdev); |
| pci_disable_device(pdev); |
| } |
| } |
| |
| static int |
| _base_diag_reset(struct MPT3SAS_ADAPTER *ioc); |
| |
| /** |
| * _base_check_for_fault_and_issue_reset - check if IOC is in fault state |
| * and if it is in fault state then issue diag reset. |
| * @ioc: per adapter object |
| * |
| * Returns: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_check_for_fault_and_issue_reset(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u32 ioc_state; |
| int rc = -EFAULT; |
| |
| dinitprintk(ioc, pr_info("%s\n", __func__)); |
| if (ioc->pci_error_recovery) |
| return 0; |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| dhsprintk(ioc, pr_info("%s: ioc_state(0x%08x)\n", __func__, ioc_state)); |
| |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { |
| mpt3sas_print_fault_code(ioc, ioc_state & |
| MPI2_DOORBELL_DATA_MASK); |
| rc = _base_diag_reset(ioc); |
| } else if ((ioc_state & MPI2_IOC_STATE_MASK) == |
| MPI2_IOC_STATE_COREDUMP) { |
| mpt3sas_print_coredump_info(ioc, ioc_state & |
| MPI2_DOORBELL_DATA_MASK); |
| mpt3sas_base_wait_for_coredump_completion(ioc, __func__); |
| rc = _base_diag_reset(ioc); |
| } |
| |
| return rc; |
| } |
| |
| /** |
| * mpt3sas_base_map_resources - map in controller resources (io/irq/memap) |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct pci_dev *pdev = ioc->pdev; |
| u32 memap_sz; |
| u32 pio_sz; |
| int i, r = 0, rc; |
| u64 pio_chip = 0; |
| phys_addr_t chip_phys = 0; |
| struct adapter_reply_queue *reply_q; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM); |
| if (pci_enable_device_mem(pdev)) { |
| ioc_warn(ioc, "pci_enable_device_mem: failed\n"); |
| ioc->bars = 0; |
| return -ENODEV; |
| } |
| |
| |
| if (pci_request_selected_regions(pdev, ioc->bars, |
| ioc->driver_name)) { |
| ioc_warn(ioc, "pci_request_selected_regions: failed\n"); |
| ioc->bars = 0; |
| r = -ENODEV; |
| goto out_fail; |
| } |
| |
| /* AER (Advanced Error Reporting) hooks */ |
| pci_enable_pcie_error_reporting(pdev); |
| |
| pci_set_master(pdev); |
| |
| |
| if (_base_config_dma_addressing(ioc, pdev) != 0) { |
| ioc_warn(ioc, "no suitable DMA mask for %s\n", pci_name(pdev)); |
| r = -ENODEV; |
| goto out_fail; |
| } |
| |
| for (i = 0, memap_sz = 0, pio_sz = 0; (i < DEVICE_COUNT_RESOURCE) && |
| (!memap_sz || !pio_sz); i++) { |
| if (pci_resource_flags(pdev, i) & IORESOURCE_IO) { |
| if (pio_sz) |
| continue; |
| pio_chip = (u64)pci_resource_start(pdev, i); |
| pio_sz = pci_resource_len(pdev, i); |
| } else if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) { |
| if (memap_sz) |
| continue; |
| ioc->chip_phys = pci_resource_start(pdev, i); |
| chip_phys = ioc->chip_phys; |
| memap_sz = pci_resource_len(pdev, i); |
| ioc->chip = ioremap(ioc->chip_phys, memap_sz); |
| } |
| } |
| |
| if (ioc->chip == NULL) { |
| ioc_err(ioc, |
| "unable to map adapter memory! or resource not found\n"); |
| r = -EINVAL; |
| goto out_fail; |
| } |
| |
| mpt3sas_base_mask_interrupts(ioc); |
| |
| r = _base_get_ioc_facts(ioc); |
| if (r) { |
| rc = _base_check_for_fault_and_issue_reset(ioc); |
| if (rc || (_base_get_ioc_facts(ioc))) |
| goto out_fail; |
| } |
| |
| if (!ioc->rdpq_array_enable_assigned) { |
| ioc->rdpq_array_enable = ioc->rdpq_array_capable; |
| ioc->rdpq_array_enable_assigned = 1; |
| } |
| |
| r = _base_enable_msix(ioc); |
| if (r) |
| goto out_fail; |
| |
| if (!ioc->is_driver_loading) |
| _base_init_irqpolls(ioc); |
| /* Use the Combined reply queue feature only for SAS3 C0 & higher |
| * revision HBAs and also only when reply queue count is greater than 8 |
| */ |
| if (ioc->combined_reply_queue) { |
| /* Determine the Supplemental Reply Post Host Index Registers |
| * Addresse. Supplemental Reply Post Host Index Registers |
| * starts at offset MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET and |
| * each register is at offset bytes of |
| * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET from previous one. |
| */ |
| ioc->replyPostRegisterIndex = kcalloc( |
| ioc->combined_reply_index_count, |
| sizeof(resource_size_t *), GFP_KERNEL); |
| if (!ioc->replyPostRegisterIndex) { |
| ioc_err(ioc, |
| "allocation for replyPostRegisterIndex failed!\n"); |
| r = -ENOMEM; |
| goto out_fail; |
| } |
| |
| for (i = 0; i < ioc->combined_reply_index_count; i++) { |
| ioc->replyPostRegisterIndex[i] = (resource_size_t *) |
| ((u8 __force *)&ioc->chip->Doorbell + |
| MPI25_SUP_REPLY_POST_HOST_INDEX_OFFSET + |
| (i * MPT3_SUP_REPLY_POST_HOST_INDEX_REG_OFFSET)); |
| } |
| } |
| |
| if (ioc->is_warpdrive) { |
| ioc->reply_post_host_index[0] = (resource_size_t __iomem *) |
| &ioc->chip->ReplyPostHostIndex; |
| |
| for (i = 1; i < ioc->cpu_msix_table_sz; i++) |
| ioc->reply_post_host_index[i] = |
| (resource_size_t __iomem *) |
| ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1) |
| * 4))); |
| } |
| |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) |
| pr_info("%s: %s enabled: IRQ %d\n", |
| reply_q->name, |
| ioc->msix_enable ? "PCI-MSI-X" : "IO-APIC", |
| pci_irq_vector(ioc->pdev, reply_q->msix_index)); |
| |
| ioc_info(ioc, "iomem(%pap), mapped(0x%p), size(%d)\n", |
| &chip_phys, ioc->chip, memap_sz); |
| ioc_info(ioc, "ioport(0x%016llx), size(%d)\n", |
| (unsigned long long)pio_chip, pio_sz); |
| |
| /* Save PCI configuration state for recovery from PCI AER/EEH errors */ |
| pci_save_state(pdev); |
| return 0; |
| |
| out_fail: |
| mpt3sas_base_unmap_resources(ioc); |
| return r; |
| } |
| |
| /** |
| * mpt3sas_base_get_msg_frame - obtain request mf pointer |
| * @ioc: per adapter object |
| * @smid: system request message index(smid zero is invalid) |
| * |
| * Return: virt pointer to message frame. |
| */ |
| void * |
| mpt3sas_base_get_msg_frame(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| return (void *)(ioc->request + (smid * ioc->request_sz)); |
| } |
| |
| /** |
| * mpt3sas_base_get_sense_buffer - obtain a sense buffer virt addr |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return: virt pointer to sense buffer. |
| */ |
| void * |
| mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| return (void *)(ioc->sense + ((smid - 1) * SCSI_SENSE_BUFFERSIZE)); |
| } |
| |
| /** |
| * mpt3sas_base_get_sense_buffer_dma - obtain a sense buffer dma addr |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return: phys pointer to the low 32bit address of the sense buffer. |
| */ |
| __le32 |
| mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| return cpu_to_le32(ioc->sense_dma + ((smid - 1) * |
| SCSI_SENSE_BUFFERSIZE)); |
| } |
| |
| /** |
| * mpt3sas_base_get_pcie_sgl - obtain a PCIe SGL virt addr |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return: virt pointer to a PCIe SGL. |
| */ |
| void * |
| mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| return (void *)(ioc->pcie_sg_lookup[smid - 1].pcie_sgl); |
| } |
| |
| /** |
| * mpt3sas_base_get_pcie_sgl_dma - obtain a PCIe SGL dma addr |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return: phys pointer to the address of the PCIe buffer. |
| */ |
| dma_addr_t |
| mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| return ioc->pcie_sg_lookup[smid - 1].pcie_sgl_dma; |
| } |
| |
| /** |
| * mpt3sas_base_get_reply_virt_addr - obtain reply frames virt address |
| * @ioc: per adapter object |
| * @phys_addr: lower 32 physical addr of the reply |
| * |
| * Converts 32bit lower physical addr into a virt address. |
| */ |
| void * |
| mpt3sas_base_get_reply_virt_addr(struct MPT3SAS_ADAPTER *ioc, u32 phys_addr) |
| { |
| if (!phys_addr) |
| return NULL; |
| return ioc->reply + (phys_addr - (u32)ioc->reply_dma); |
| } |
| |
| /** |
| * _base_get_msix_index - get the msix index |
| * @ioc: per adapter object |
| * @scmd: scsi_cmnd object |
| * |
| * returns msix index of general reply queues, |
| * i.e. reply queue on which IO request's reply |
| * should be posted by the HBA firmware. |
| */ |
| static inline u8 |
| _base_get_msix_index(struct MPT3SAS_ADAPTER *ioc, |
| struct scsi_cmnd *scmd) |
| { |
| /* Enables reply_queue load balancing */ |
| if (ioc->msix_load_balance) |
| return ioc->reply_queue_count ? |
| base_mod64(atomic64_add_return(1, |
| &ioc->total_io_cnt), ioc->reply_queue_count) : 0; |
| |
| return ioc->cpu_msix_table[raw_smp_processor_id()]; |
| } |
| |
| /** |
| * _base_sdev_nr_inflight_request -get number of inflight requests |
| * of a request queue. |
| * @q: request_queue object |
| * |
| * returns number of inflight request of a request queue. |
| */ |
| inline unsigned long |
| _base_sdev_nr_inflight_request(struct request_queue *q) |
| { |
| struct blk_mq_hw_ctx *hctx = q->queue_hw_ctx[0]; |
| |
| return atomic_read(&hctx->nr_active); |
| } |
| |
| |
| /** |
| * _base_get_high_iops_msix_index - get the msix index of |
| * high iops queues |
| * @ioc: per adapter object |
| * @scmd: scsi_cmnd object |
| * |
| * Returns: msix index of high iops reply queues. |
| * i.e. high iops reply queue on which IO request's |
| * reply should be posted by the HBA firmware. |
| */ |
| static inline u8 |
| _base_get_high_iops_msix_index(struct MPT3SAS_ADAPTER *ioc, |
| struct scsi_cmnd *scmd) |
| { |
| /** |
| * Round robin the IO interrupts among the high iops |
| * reply queues in terms of batch count 16 when outstanding |
| * IOs on the target device is >=8. |
| */ |
| if (_base_sdev_nr_inflight_request(scmd->device->request_queue) > |
| MPT3SAS_DEVICE_HIGH_IOPS_DEPTH) |
| return base_mod64(( |
| atomic64_add_return(1, &ioc->high_iops_outstanding) / |
| MPT3SAS_HIGH_IOPS_BATCH_COUNT), |
| MPT3SAS_HIGH_IOPS_REPLY_QUEUES); |
| |
| return _base_get_msix_index(ioc, scmd); |
| } |
| |
| /** |
| * mpt3sas_base_get_smid - obtain a free smid from internal queue |
| * @ioc: per adapter object |
| * @cb_idx: callback index |
| * |
| * Return: smid (zero is invalid) |
| */ |
| u16 |
| mpt3sas_base_get_smid(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx) |
| { |
| unsigned long flags; |
| struct request_tracker *request; |
| u16 smid; |
| |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| if (list_empty(&ioc->internal_free_list)) { |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| ioc_err(ioc, "%s: smid not available\n", __func__); |
| return 0; |
| } |
| |
| request = list_entry(ioc->internal_free_list.next, |
| struct request_tracker, tracker_list); |
| request->cb_idx = cb_idx; |
| smid = request->smid; |
| list_del(&request->tracker_list); |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| return smid; |
| } |
| |
| /** |
| * mpt3sas_base_get_smid_scsiio - obtain a free smid from scsiio queue |
| * @ioc: per adapter object |
| * @cb_idx: callback index |
| * @scmd: pointer to scsi command object |
| * |
| * Return: smid (zero is invalid) |
| */ |
| u16 |
| mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx, |
| struct scsi_cmnd *scmd) |
| { |
| struct scsiio_tracker *request = scsi_cmd_priv(scmd); |
| unsigned int tag = scmd->request->tag; |
| u16 smid; |
| |
| smid = tag + 1; |
| request->cb_idx = cb_idx; |
| request->smid = smid; |
| request->scmd = scmd; |
| INIT_LIST_HEAD(&request->chain_list); |
| return smid; |
| } |
| |
| /** |
| * mpt3sas_base_get_smid_hpr - obtain a free smid from hi-priority queue |
| * @ioc: per adapter object |
| * @cb_idx: callback index |
| * |
| * Return: smid (zero is invalid) |
| */ |
| u16 |
| mpt3sas_base_get_smid_hpr(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx) |
| { |
| unsigned long flags; |
| struct request_tracker *request; |
| u16 smid; |
| |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| if (list_empty(&ioc->hpr_free_list)) { |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| return 0; |
| } |
| |
| request = list_entry(ioc->hpr_free_list.next, |
| struct request_tracker, tracker_list); |
| request->cb_idx = cb_idx; |
| smid = request->smid; |
| list_del(&request->tracker_list); |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| return smid; |
| } |
| |
| static void |
| _base_recovery_check(struct MPT3SAS_ADAPTER *ioc) |
| { |
| /* |
| * See _wait_for_commands_to_complete() call with regards to this code. |
| */ |
| if (ioc->shost_recovery && ioc->pending_io_count) { |
| ioc->pending_io_count = scsi_host_busy(ioc->shost); |
| if (ioc->pending_io_count == 0) |
| wake_up(&ioc->reset_wq); |
| } |
| } |
| |
| void mpt3sas_base_clear_st(struct MPT3SAS_ADAPTER *ioc, |
| struct scsiio_tracker *st) |
| { |
| if (WARN_ON(st->smid == 0)) |
| return; |
| st->cb_idx = 0xFF; |
| st->direct_io = 0; |
| st->scmd = NULL; |
| atomic_set(&ioc->chain_lookup[st->smid - 1].chain_offset, 0); |
| st->smid = 0; |
| } |
| |
| /** |
| * mpt3sas_base_free_smid - put smid back on free_list |
| * @ioc: per adapter object |
| * @smid: system request message index |
| */ |
| void |
| mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| unsigned long flags; |
| int i; |
| |
| if (smid < ioc->hi_priority_smid) { |
| struct scsiio_tracker *st; |
| void *request; |
| |
| st = _get_st_from_smid(ioc, smid); |
| if (!st) { |
| _base_recovery_check(ioc); |
| return; |
| } |
| |
| /* Clear MPI request frame */ |
| request = mpt3sas_base_get_msg_frame(ioc, smid); |
| memset(request, 0, ioc->request_sz); |
| |
| mpt3sas_base_clear_st(ioc, st); |
| _base_recovery_check(ioc); |
| return; |
| } |
| |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| if (smid < ioc->internal_smid) { |
| /* hi-priority */ |
| i = smid - ioc->hi_priority_smid; |
| ioc->hpr_lookup[i].cb_idx = 0xFF; |
| list_add(&ioc->hpr_lookup[i].tracker_list, &ioc->hpr_free_list); |
| } else if (smid <= ioc->hba_queue_depth) { |
| /* internal queue */ |
| i = smid - ioc->internal_smid; |
| ioc->internal_lookup[i].cb_idx = 0xFF; |
| list_add(&ioc->internal_lookup[i].tracker_list, |
| &ioc->internal_free_list); |
| } |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| } |
| |
| /** |
| * _base_mpi_ep_writeq - 32 bit write to MMIO |
| * @b: data payload |
| * @addr: address in MMIO space |
| * @writeq_lock: spin lock |
| * |
| * This special handling for MPI EP to take care of 32 bit |
| * environment where its not quarenteed to send the entire word |
| * in one transfer. |
| */ |
| static inline void |
| _base_mpi_ep_writeq(__u64 b, volatile void __iomem *addr, |
| spinlock_t *writeq_lock) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(writeq_lock, flags); |
| __raw_writel((u32)(b), addr); |
| __raw_writel((u32)(b >> 32), (addr + 4)); |
| spin_unlock_irqrestore(writeq_lock, flags); |
| } |
| |
| /** |
| * _base_writeq - 64 bit write to MMIO |
| * @b: data payload |
| * @addr: address in MMIO space |
| * @writeq_lock: spin lock |
| * |
| * Glue for handling an atomic 64 bit word to MMIO. This special handling takes |
| * care of 32 bit environment where its not quarenteed to send the entire word |
| * in one transfer. |
| */ |
| #if defined(writeq) && defined(CONFIG_64BIT) |
| static inline void |
| _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) |
| { |
| wmb(); |
| __raw_writeq(b, addr); |
| barrier(); |
| } |
| #else |
| static inline void |
| _base_writeq(__u64 b, volatile void __iomem *addr, spinlock_t *writeq_lock) |
| { |
| _base_mpi_ep_writeq(b, addr, writeq_lock); |
| } |
| #endif |
| |
| /** |
| * _base_set_and_get_msix_index - get the msix index and assign to msix_io |
| * variable of scsi tracker |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * returns msix index. |
| */ |
| static u8 |
| _base_set_and_get_msix_index(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| struct scsiio_tracker *st = NULL; |
| |
| if (smid < ioc->hi_priority_smid) |
| st = _get_st_from_smid(ioc, smid); |
| |
| if (st == NULL) |
| return _base_get_msix_index(ioc, NULL); |
| |
| st->msix_io = ioc->get_msix_index_for_smlio(ioc, st->scmd); |
| return st->msix_io; |
| } |
| |
| /** |
| * _base_put_smid_mpi_ep_scsi_io - send SCSI_IO request to firmware |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @handle: device handle |
| */ |
| static void |
| _base_put_smid_mpi_ep_scsi_io(struct MPT3SAS_ADAPTER *ioc, |
| u16 smid, u16 handle) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| u64 *request = (u64 *)&descriptor; |
| void *mpi_req_iomem; |
| __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid); |
| |
| _clone_sg_entries(ioc, (void *) mfp, smid); |
| mpi_req_iomem = (void __force *)ioc->chip + |
| MPI_FRAME_START_OFFSET + (smid * ioc->request_sz); |
| _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp, |
| ioc->request_sz); |
| descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; |
| descriptor.SCSIIO.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); |
| descriptor.SCSIIO.SMID = cpu_to_le16(smid); |
| descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); |
| descriptor.SCSIIO.LMID = 0; |
| _base_mpi_ep_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * _base_put_smid_scsi_io - send SCSI_IO request to firmware |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @handle: device handle |
| */ |
| static void |
| _base_put_smid_scsi_io(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 handle) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| u64 *request = (u64 *)&descriptor; |
| |
| |
| descriptor.SCSIIO.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; |
| descriptor.SCSIIO.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); |
| descriptor.SCSIIO.SMID = cpu_to_le16(smid); |
| descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); |
| descriptor.SCSIIO.LMID = 0; |
| _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * _base_put_smid_fast_path - send fast path request to firmware |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @handle: device handle |
| */ |
| static void |
| _base_put_smid_fast_path(struct MPT3SAS_ADAPTER *ioc, u16 smid, |
| u16 handle) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| u64 *request = (u64 *)&descriptor; |
| |
| descriptor.SCSIIO.RequestFlags = |
| MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO; |
| descriptor.SCSIIO.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); |
| descriptor.SCSIIO.SMID = cpu_to_le16(smid); |
| descriptor.SCSIIO.DevHandle = cpu_to_le16(handle); |
| descriptor.SCSIIO.LMID = 0; |
| _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * _base_put_smid_hi_priority - send Task Management request to firmware |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @msix_task: msix_task will be same as msix of IO incase of task abort else 0. |
| */ |
| static void |
| _base_put_smid_hi_priority(struct MPT3SAS_ADAPTER *ioc, u16 smid, |
| u16 msix_task) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| void *mpi_req_iomem; |
| u64 *request; |
| |
| if (ioc->is_mcpu_endpoint) { |
| __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid); |
| |
| /* TBD 256 is offset within sys register. */ |
| mpi_req_iomem = (void __force *)ioc->chip |
| + MPI_FRAME_START_OFFSET |
| + (smid * ioc->request_sz); |
| _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp, |
| ioc->request_sz); |
| } |
| |
| request = (u64 *)&descriptor; |
| |
| descriptor.HighPriority.RequestFlags = |
| MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; |
| descriptor.HighPriority.MSIxIndex = msix_task; |
| descriptor.HighPriority.SMID = cpu_to_le16(smid); |
| descriptor.HighPriority.LMID = 0; |
| descriptor.HighPriority.Reserved1 = 0; |
| if (ioc->is_mcpu_endpoint) |
| _base_mpi_ep_writeq(*request, |
| &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| else |
| _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * mpt3sas_base_put_smid_nvme_encap - send NVMe encapsulated request to |
| * firmware |
| * @ioc: per adapter object |
| * @smid: system request message index |
| */ |
| void |
| mpt3sas_base_put_smid_nvme_encap(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| u64 *request = (u64 *)&descriptor; |
| |
| descriptor.Default.RequestFlags = |
| MPI26_REQ_DESCRIPT_FLAGS_PCIE_ENCAPSULATED; |
| descriptor.Default.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); |
| descriptor.Default.SMID = cpu_to_le16(smid); |
| descriptor.Default.LMID = 0; |
| descriptor.Default.DescriptorTypeDependent = 0; |
| _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * _base_put_smid_default - Default, primarily used for config pages |
| * @ioc: per adapter object |
| * @smid: system request message index |
| */ |
| static void |
| _base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| Mpi2RequestDescriptorUnion_t descriptor; |
| void *mpi_req_iomem; |
| u64 *request; |
| |
| if (ioc->is_mcpu_endpoint) { |
| __le32 *mfp = (__le32 *)mpt3sas_base_get_msg_frame(ioc, smid); |
| |
| _clone_sg_entries(ioc, (void *) mfp, smid); |
| /* TBD 256 is offset within sys register */ |
| mpi_req_iomem = (void __force *)ioc->chip + |
| MPI_FRAME_START_OFFSET + (smid * ioc->request_sz); |
| _base_clone_mpi_to_sys_mem(mpi_req_iomem, (void *)mfp, |
| ioc->request_sz); |
| } |
| request = (u64 *)&descriptor; |
| descriptor.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; |
| descriptor.Default.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); |
| descriptor.Default.SMID = cpu_to_le16(smid); |
| descriptor.Default.LMID = 0; |
| descriptor.Default.DescriptorTypeDependent = 0; |
| if (ioc->is_mcpu_endpoint) |
| _base_mpi_ep_writeq(*request, |
| &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| else |
| _base_writeq(*request, &ioc->chip->RequestDescriptorPostLow, |
| &ioc->scsi_lookup_lock); |
| } |
| |
| /** |
| * _base_put_smid_scsi_io_atomic - send SCSI_IO request to firmware using |
| * Atomic Request Descriptor |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @handle: device handle, unused in this function, for function type match |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_put_smid_scsi_io_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, |
| u16 handle) |
| { |
| Mpi26AtomicRequestDescriptor_t descriptor; |
| u32 *request = (u32 *)&descriptor; |
| |
| descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO; |
| descriptor.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); |
| descriptor.SMID = cpu_to_le16(smid); |
| |
| writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost); |
| } |
| |
| /** |
| * _base_put_smid_fast_path_atomic - send fast path request to firmware |
| * using Atomic Request Descriptor |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @handle: device handle, unused in this function, for function type match |
| * Return nothing |
| */ |
| static void |
| _base_put_smid_fast_path_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, |
| u16 handle) |
| { |
| Mpi26AtomicRequestDescriptor_t descriptor; |
| u32 *request = (u32 *)&descriptor; |
| |
| descriptor.RequestFlags = MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO; |
| descriptor.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); |
| descriptor.SMID = cpu_to_le16(smid); |
| |
| writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost); |
| } |
| |
| /** |
| * _base_put_smid_hi_priority_atomic - send Task Management request to |
| * firmware using Atomic Request Descriptor |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @msix_task: msix_task will be same as msix of IO incase of task abort else 0 |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_put_smid_hi_priority_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid, |
| u16 msix_task) |
| { |
| Mpi26AtomicRequestDescriptor_t descriptor; |
| u32 *request = (u32 *)&descriptor; |
| |
| descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY; |
| descriptor.MSIxIndex = msix_task; |
| descriptor.SMID = cpu_to_le16(smid); |
| |
| writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost); |
| } |
| |
| /** |
| * _base_put_smid_default - Default, primarily used for config pages |
| * use Atomic Request Descriptor |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_put_smid_default_atomic(struct MPT3SAS_ADAPTER *ioc, u16 smid) |
| { |
| Mpi26AtomicRequestDescriptor_t descriptor; |
| u32 *request = (u32 *)&descriptor; |
| |
| descriptor.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE; |
| descriptor.MSIxIndex = _base_set_and_get_msix_index(ioc, smid); |
| descriptor.SMID = cpu_to_le16(smid); |
| |
| writel(cpu_to_le32(*request), &ioc->chip->AtomicRequestDescriptorPost); |
| } |
| |
| /** |
| * _base_display_OEMs_branding - Display branding string |
| * @ioc: per adapter object |
| */ |
| static void |
| _base_display_OEMs_branding(struct MPT3SAS_ADAPTER *ioc) |
| { |
| if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL) |
| return; |
| |
| switch (ioc->pdev->subsystem_vendor) { |
| case PCI_VENDOR_ID_INTEL: |
| switch (ioc->pdev->device) { |
| case MPI2_MFGPAGE_DEVID_SAS2008: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT2SAS_INTEL_RMS2LL080_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_RMS2LL080_BRANDING); |
| break; |
| case MPT2SAS_INTEL_RMS2LL040_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_RMS2LL040_BRANDING); |
| break; |
| case MPT2SAS_INTEL_SSD910_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_SSD910_BRANDING); |
| break; |
| default: |
| ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| case MPI2_MFGPAGE_DEVID_SAS2308_2: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT2SAS_INTEL_RS25GB008_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_RS25GB008_BRANDING); |
| break; |
| case MPT2SAS_INTEL_RMS25JB080_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_RMS25JB080_BRANDING); |
| break; |
| case MPT2SAS_INTEL_RMS25JB040_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_RMS25JB040_BRANDING); |
| break; |
| case MPT2SAS_INTEL_RMS25KB080_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_RMS25KB080_BRANDING); |
| break; |
| case MPT2SAS_INTEL_RMS25KB040_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_RMS25KB040_BRANDING); |
| break; |
| case MPT2SAS_INTEL_RMS25LB040_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_RMS25LB040_BRANDING); |
| break; |
| case MPT2SAS_INTEL_RMS25LB080_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_INTEL_RMS25LB080_BRANDING); |
| break; |
| default: |
| ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| case MPI25_MFGPAGE_DEVID_SAS3008: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT3SAS_INTEL_RMS3JC080_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_INTEL_RMS3JC080_BRANDING); |
| break; |
| |
| case MPT3SAS_INTEL_RS3GC008_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_INTEL_RS3GC008_BRANDING); |
| break; |
| case MPT3SAS_INTEL_RS3FC044_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_INTEL_RS3FC044_BRANDING); |
| break; |
| case MPT3SAS_INTEL_RS3UC080_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_INTEL_RS3UC080_BRANDING); |
| break; |
| default: |
| ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| default: |
| ioc_info(ioc, "Intel(R) Controller: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| case PCI_VENDOR_ID_DELL: |
| switch (ioc->pdev->device) { |
| case MPI2_MFGPAGE_DEVID_SAS2008: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING); |
| break; |
| case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING); |
| break; |
| case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING); |
| break; |
| case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING); |
| break; |
| case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING); |
| break; |
| case MPT2SAS_DELL_PERC_H200_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_DELL_PERC_H200_BRANDING); |
| break; |
| case MPT2SAS_DELL_6GBPS_SAS_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_DELL_6GBPS_SAS_BRANDING); |
| break; |
| default: |
| ioc_info(ioc, "Dell 6Gbps HBA: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| case MPI25_MFGPAGE_DEVID_SAS3008: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT3SAS_DELL_12G_HBA_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_DELL_12G_HBA_BRANDING); |
| break; |
| default: |
| ioc_info(ioc, "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| default: |
| ioc_info(ioc, "Dell HBA: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| case PCI_VENDOR_ID_CISCO: |
| switch (ioc->pdev->device) { |
| case MPI25_MFGPAGE_DEVID_SAS3008: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT3SAS_CISCO_12G_8E_HBA_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_CISCO_12G_8E_HBA_BRANDING); |
| break; |
| case MPT3SAS_CISCO_12G_8I_HBA_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_CISCO_12G_8I_HBA_BRANDING); |
| break; |
| case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING); |
| break; |
| default: |
| ioc_info(ioc, "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| case MPI25_MFGPAGE_DEVID_SAS3108_1: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING); |
| break; |
| case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING); |
| break; |
| default: |
| ioc_info(ioc, "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| default: |
| ioc_info(ioc, "Cisco SAS HBA: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| case MPT2SAS_HP_3PAR_SSVID: |
| switch (ioc->pdev->device) { |
| case MPI2_MFGPAGE_DEVID_SAS2004: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING); |
| break; |
| default: |
| ioc_info(ioc, "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| case MPI2_MFGPAGE_DEVID_SAS2308_2: |
| switch (ioc->pdev->subsystem_device) { |
| case MPT2SAS_HP_2_4_INTERNAL_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_HP_2_4_INTERNAL_BRANDING); |
| break; |
| case MPT2SAS_HP_2_4_EXTERNAL_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_HP_2_4_EXTERNAL_BRANDING); |
| break; |
| case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING); |
| break; |
| case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID: |
| ioc_info(ioc, "%s\n", |
| MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING); |
| break; |
| default: |
| ioc_info(ioc, "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| break; |
| default: |
| ioc_info(ioc, "HP SAS HBA: Subsystem ID: 0x%X\n", |
| ioc->pdev->subsystem_device); |
| break; |
| } |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * _base_display_fwpkg_version - sends FWUpload request to pull FWPkg |
| * version from FW Image Header. |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_display_fwpkg_version(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2FWImageHeader_t *fw_img_hdr; |
| Mpi26ComponentImageHeader_t *cmp_img_hdr; |
| Mpi25FWUploadRequest_t *mpi_request; |
| Mpi2FWUploadReply_t mpi_reply; |
| int r = 0; |
| u32 package_version = 0; |
| void *fwpkg_data = NULL; |
| dma_addr_t fwpkg_data_dma; |
| u16 smid, ioc_status; |
| size_t data_length; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| if (ioc->base_cmds.status & MPT3_CMD_PENDING) { |
| ioc_err(ioc, "%s: internal command already in use\n", __func__); |
| return -EAGAIN; |
| } |
| |
| data_length = sizeof(Mpi2FWImageHeader_t); |
| fwpkg_data = dma_alloc_coherent(&ioc->pdev->dev, data_length, |
| &fwpkg_data_dma, GFP_KERNEL); |
| if (!fwpkg_data) { |
| ioc_err(ioc, |
| "Memory allocation for fwpkg data failed at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| return -ENOMEM; |
| } |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); |
| if (!smid) { |
| ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); |
| r = -EAGAIN; |
| goto out; |
| } |
| |
| ioc->base_cmds.status = MPT3_CMD_PENDING; |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->base_cmds.smid = smid; |
| memset(mpi_request, 0, sizeof(Mpi25FWUploadRequest_t)); |
| mpi_request->Function = MPI2_FUNCTION_FW_UPLOAD; |
| mpi_request->ImageType = MPI2_FW_UPLOAD_ITYPE_FW_FLASH; |
| mpi_request->ImageSize = cpu_to_le32(data_length); |
| ioc->build_sg(ioc, &mpi_request->SGL, 0, 0, fwpkg_data_dma, |
| data_length); |
| init_completion(&ioc->base_cmds.done); |
| ioc->put_smid_default(ioc, smid); |
| /* Wait for 15 seconds */ |
| wait_for_completion_timeout(&ioc->base_cmds.done, |
| FW_IMG_HDR_READ_TIMEOUT*HZ); |
| ioc_info(ioc, "%s: complete\n", __func__); |
| if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { |
| ioc_err(ioc, "%s: timeout\n", __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi25FWUploadRequest_t)/4); |
| r = -ETIME; |
| } else { |
| memset(&mpi_reply, 0, sizeof(Mpi2FWUploadReply_t)); |
| if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) { |
| memcpy(&mpi_reply, ioc->base_cmds.reply, |
| sizeof(Mpi2FWUploadReply_t)); |
| ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & |
| MPI2_IOCSTATUS_MASK; |
| if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { |
| fw_img_hdr = (Mpi2FWImageHeader_t *)fwpkg_data; |
| if (le32_to_cpu(fw_img_hdr->Signature) == |
| MPI26_IMAGE_HEADER_SIGNATURE0_MPI26) { |
| cmp_img_hdr = |
| (Mpi26ComponentImageHeader_t *) |
| (fwpkg_data); |
| package_version = |
| le32_to_cpu( |
| cmp_img_hdr->ApplicationSpecific); |
| } else |
| package_version = |
| le32_to_cpu( |
| fw_img_hdr->PackageVersion.Word); |
| if (package_version) |
| ioc_info(ioc, |
| "FW Package Ver(%02d.%02d.%02d.%02d)\n", |
| ((package_version) & 0xFF000000) >> 24, |
| ((package_version) & 0x00FF0000) >> 16, |
| ((package_version) & 0x0000FF00) >> 8, |
| (package_version) & 0x000000FF); |
| } else { |
| _debug_dump_mf(&mpi_reply, |
| sizeof(Mpi2FWUploadReply_t)/4); |
| } |
| } |
| } |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| out: |
| if (fwpkg_data) |
| dma_free_coherent(&ioc->pdev->dev, data_length, fwpkg_data, |
| fwpkg_data_dma); |
| return r; |
| } |
| |
| /** |
| * _base_display_ioc_capabilities - Disply IOC's capabilities. |
| * @ioc: per adapter object |
| */ |
| static void |
| _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int i = 0; |
| char desc[16]; |
| u32 iounit_pg1_flags; |
| u32 bios_version; |
| |
| bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion); |
| strncpy(desc, ioc->manu_pg0.ChipName, 16); |
| ioc_info(ioc, "%s: FWVersion(%02d.%02d.%02d.%02d), ChipRevision(0x%02x), BiosVersion(%02d.%02d.%02d.%02d)\n", |
| desc, |
| (ioc->facts.FWVersion.Word & 0xFF000000) >> 24, |
| (ioc->facts.FWVersion.Word & 0x00FF0000) >> 16, |
| (ioc->facts.FWVersion.Word & 0x0000FF00) >> 8, |
| ioc->facts.FWVersion.Word & 0x000000FF, |
| ioc->pdev->revision, |
| (bios_version & 0xFF000000) >> 24, |
| (bios_version & 0x00FF0000) >> 16, |
| (bios_version & 0x0000FF00) >> 8, |
| bios_version & 0x000000FF); |
| |
| _base_display_OEMs_branding(ioc); |
| |
| if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) { |
| pr_info("%sNVMe", i ? "," : ""); |
| i++; |
| } |
| |
| ioc_info(ioc, "Protocol=("); |
| |
| if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR) { |
| pr_cont("Initiator"); |
| i++; |
| } |
| |
| if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET) { |
| pr_cont("%sTarget", i ? "," : ""); |
| i++; |
| } |
| |
| i = 0; |
| pr_cont("), Capabilities=("); |
| |
| if (!ioc->hide_ir_msg) { |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { |
| pr_cont("Raid"); |
| i++; |
| } |
| } |
| |
| if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { |
| pr_cont("%sTLR", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_MULTICAST) { |
| pr_cont("%sMulticast", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET) { |
| pr_cont("%sBIDI Target", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_EEDP) { |
| pr_cont("%sEEDP", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER) { |
| pr_cont("%sSnapshot Buffer", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER) { |
| pr_cont("%sDiag Trace Buffer", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER) { |
| pr_cont("%sDiag Extended Buffer", i ? "," : ""); |
| i++; |
| } |
| |
| if (ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING) { |
| pr_cont("%sTask Set Full", i ? "," : ""); |
| i++; |
| } |
| |
| iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); |
| if (!(iounit_pg1_flags & MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE)) { |
| pr_cont("%sNCQ", i ? "," : ""); |
| i++; |
| } |
| |
| pr_cont(")\n"); |
| } |
| |
| /** |
| * mpt3sas_base_update_missing_delay - change the missing delay timers |
| * @ioc: per adapter object |
| * @device_missing_delay: amount of time till device is reported missing |
| * @io_missing_delay: interval IO is returned when there is a missing device |
| * |
| * Passed on the command line, this function will modify the device missing |
| * delay, as well as the io missing delay. This should be called at driver |
| * load time. |
| */ |
| void |
| mpt3sas_base_update_missing_delay(struct MPT3SAS_ADAPTER *ioc, |
| u16 device_missing_delay, u8 io_missing_delay) |
| { |
| u16 dmd, dmd_new, dmd_orignal; |
| u8 io_missing_delay_original; |
| u16 sz; |
| Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL; |
| Mpi2ConfigReply_t mpi_reply; |
| u8 num_phys = 0; |
| u16 ioc_status; |
| |
| mpt3sas_config_get_number_hba_phys(ioc, &num_phys); |
| if (!num_phys) |
| return; |
| |
| sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (num_phys * |
| sizeof(Mpi2SasIOUnit1PhyData_t)); |
| sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL); |
| if (!sas_iounit_pg1) { |
| ioc_err(ioc, "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| goto out; |
| } |
| if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply, |
| sas_iounit_pg1, sz))) { |
| ioc_err(ioc, "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| goto out; |
| } |
| ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & |
| MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { |
| ioc_err(ioc, "failure at %s:%d/%s()!\n", |
| __FILE__, __LINE__, __func__); |
| goto out; |
| } |
| |
| /* device missing delay */ |
| dmd = sas_iounit_pg1->ReportDeviceMissingDelay; |
| if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) |
| dmd = (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; |
| else |
| dmd = dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; |
| dmd_orignal = dmd; |
| if (device_missing_delay > 0x7F) { |
| dmd = (device_missing_delay > 0x7F0) ? 0x7F0 : |
| device_missing_delay; |
| dmd = dmd / 16; |
| dmd |= MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16; |
| } else |
| dmd = device_missing_delay; |
| sas_iounit_pg1->ReportDeviceMissingDelay = dmd; |
| |
| /* io missing delay */ |
| io_missing_delay_original = sas_iounit_pg1->IODeviceMissingDelay; |
| sas_iounit_pg1->IODeviceMissingDelay = io_missing_delay; |
| |
| if (!mpt3sas_config_set_sas_iounit_pg1(ioc, &mpi_reply, sas_iounit_pg1, |
| sz)) { |
| if (dmd & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16) |
| dmd_new = (dmd & |
| MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16; |
| else |
| dmd_new = |
| dmd & MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK; |
| ioc_info(ioc, "device_missing_delay: old(%d), new(%d)\n", |
| dmd_orignal, dmd_new); |
| ioc_info(ioc, "ioc_missing_delay: old(%d), new(%d)\n", |
| io_missing_delay_original, |
| io_missing_delay); |
| ioc->device_missing_delay = dmd_new; |
| ioc->io_missing_delay = io_missing_delay; |
| } |
| |
| out: |
| kfree(sas_iounit_pg1); |
| } |
| |
| /** |
| * _base_update_ioc_page1_inlinewith_perf_mode - Update IOC Page1 fields |
| * according to performance mode. |
| * @ioc : per adapter object |
| * |
| * Return nothing. |
| */ |
| static void |
| _base_update_ioc_page1_inlinewith_perf_mode(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2IOCPage1_t ioc_pg1; |
| Mpi2ConfigReply_t mpi_reply; |
| |
| mpt3sas_config_get_ioc_pg1(ioc, &mpi_reply, &ioc->ioc_pg1_copy); |
| memcpy(&ioc_pg1, &ioc->ioc_pg1_copy, sizeof(Mpi2IOCPage1_t)); |
| |
| switch (perf_mode) { |
| case MPT_PERF_MODE_DEFAULT: |
| case MPT_PERF_MODE_BALANCED: |
| if (ioc->high_iops_queues) { |
| ioc_info(ioc, |
| "Enable interrupt coalescing only for first\t" |
| "%d reply queues\n", |
| MPT3SAS_HIGH_IOPS_REPLY_QUEUES); |
| /* |
| * If 31st bit is zero then interrupt coalescing is |
| * enabled for all reply descriptor post queues. |
| * If 31st bit is set to one then user can |
| * enable/disable interrupt coalescing on per reply |
| * descriptor post queue group(8) basis. So to enable |
| * interrupt coalescing only on first reply descriptor |
| * post queue group 31st bit and zero th bit is enabled. |
| */ |
| ioc_pg1.ProductSpecific = cpu_to_le32(0x80000000 | |
| ((1 << MPT3SAS_HIGH_IOPS_REPLY_QUEUES/8) - 1)); |
| mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); |
| ioc_info(ioc, "performance mode: balanced\n"); |
| return; |
| } |
| fallthrough; |
| case MPT_PERF_MODE_LATENCY: |
| /* |
| * Enable interrupt coalescing on all reply queues |
| * with timeout value 0xA |
| */ |
| ioc_pg1.CoalescingTimeout = cpu_to_le32(0xa); |
| ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING); |
| ioc_pg1.ProductSpecific = 0; |
| mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); |
| ioc_info(ioc, "performance mode: latency\n"); |
| break; |
| case MPT_PERF_MODE_IOPS: |
| /* |
| * Enable interrupt coalescing on all reply queues. |
| */ |
| ioc_info(ioc, |
| "performance mode: iops with coalescing timeout: 0x%x\n", |
| le32_to_cpu(ioc_pg1.CoalescingTimeout)); |
| ioc_pg1.Flags |= cpu_to_le32(MPI2_IOCPAGE1_REPLY_COALESCING); |
| ioc_pg1.ProductSpecific = 0; |
| mpt3sas_config_set_ioc_pg1(ioc, &mpi_reply, &ioc_pg1); |
| break; |
| } |
| } |
| |
| /** |
| * _base_static_config_pages - static start of day config pages |
| * @ioc: per adapter object |
| */ |
| static void |
| _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2ConfigReply_t mpi_reply; |
| u32 iounit_pg1_flags; |
| |
| ioc->nvme_abort_timeout = 30; |
| mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); |
| if (ioc->ir_firmware) |
| mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply, |
| &ioc->manu_pg10); |
| |
| /* |
| * Ensure correct T10 PI operation if vendor left EEDPTagMode |
| * flag unset in NVDATA. |
| */ |
| mpt3sas_config_get_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11); |
| if (!ioc->is_gen35_ioc && ioc->manu_pg11.EEDPTagMode == 0) { |
| pr_err("%s: overriding NVDATA EEDPTagMode setting\n", |
| ioc->name); |
| ioc->manu_pg11.EEDPTagMode &= ~0x3; |
| ioc->manu_pg11.EEDPTagMode |= 0x1; |
| mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply, |
| &ioc->manu_pg11); |
| } |
| if (ioc->manu_pg11.AddlFlags2 & NVME_TASK_MNGT_CUSTOM_MASK) |
| ioc->tm_custom_handling = 1; |
| else { |
| ioc->tm_custom_handling = 0; |
| if (ioc->manu_pg11.NVMeAbortTO < NVME_TASK_ABORT_MIN_TIMEOUT) |
| ioc->nvme_abort_timeout = NVME_TASK_ABORT_MIN_TIMEOUT; |
| else if (ioc->manu_pg11.NVMeAbortTO > |
| NVME_TASK_ABORT_MAX_TIMEOUT) |
| ioc->nvme_abort_timeout = NVME_TASK_ABORT_MAX_TIMEOUT; |
| else |
| ioc->nvme_abort_timeout = ioc->manu_pg11.NVMeAbortTO; |
| } |
| |
| mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); |
| mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); |
| mpt3sas_config_get_ioc_pg8(ioc, &mpi_reply, &ioc->ioc_pg8); |
| mpt3sas_config_get_iounit_pg0(ioc, &mpi_reply, &ioc->iounit_pg0); |
| mpt3sas_config_get_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); |
| mpt3sas_config_get_iounit_pg8(ioc, &mpi_reply, &ioc->iounit_pg8); |
| _base_display_ioc_capabilities(ioc); |
| |
| /* |
| * Enable task_set_full handling in iounit_pg1 when the |
| * facts capabilities indicate that its supported. |
| */ |
| iounit_pg1_flags = le32_to_cpu(ioc->iounit_pg1.Flags); |
| if ((ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING)) |
| iounit_pg1_flags &= |
| ~MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; |
| else |
| iounit_pg1_flags |= |
| MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING; |
| ioc->iounit_pg1.Flags = cpu_to_le32(iounit_pg1_flags); |
| mpt3sas_config_set_iounit_pg1(ioc, &mpi_reply, &ioc->iounit_pg1); |
| |
| if (ioc->iounit_pg8.NumSensors) |
| ioc->temp_sensors_count = ioc->iounit_pg8.NumSensors; |
| if (ioc->is_aero_ioc) |
| _base_update_ioc_page1_inlinewith_perf_mode(ioc); |
| } |
| |
| /** |
| * mpt3sas_free_enclosure_list - release memory |
| * @ioc: per adapter object |
| * |
| * Free memory allocated during encloure add. |
| */ |
| void |
| mpt3sas_free_enclosure_list(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct _enclosure_node *enclosure_dev, *enclosure_dev_next; |
| |
| /* Free enclosure list */ |
| list_for_each_entry_safe(enclosure_dev, |
| enclosure_dev_next, &ioc->enclosure_list, list) { |
| list_del(&enclosure_dev->list); |
| kfree(enclosure_dev); |
| } |
| } |
| |
| /** |
| * _base_release_memory_pools - release memory |
| * @ioc: per adapter object |
| * |
| * Free memory allocated from _base_allocate_memory_pools. |
| */ |
| static void |
| _base_release_memory_pools(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int i = 0; |
| int j = 0; |
| int dma_alloc_count = 0; |
| struct chain_tracker *ct; |
| int count = ioc->rdpq_array_enable ? ioc->reply_queue_count : 1; |
| |
| dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| if (ioc->request) { |
| dma_free_coherent(&ioc->pdev->dev, ioc->request_dma_sz, |
| ioc->request, ioc->request_dma); |
| dexitprintk(ioc, |
| ioc_info(ioc, "request_pool(0x%p): free\n", |
| ioc->request)); |
| ioc->request = NULL; |
| } |
| |
| if (ioc->sense) { |
| dma_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); |
| dma_pool_destroy(ioc->sense_dma_pool); |
| dexitprintk(ioc, |
| ioc_info(ioc, "sense_pool(0x%p): free\n", |
| ioc->sense)); |
| ioc->sense = NULL; |
| } |
| |
| if (ioc->reply) { |
| dma_pool_free(ioc->reply_dma_pool, ioc->reply, ioc->reply_dma); |
| dma_pool_destroy(ioc->reply_dma_pool); |
| dexitprintk(ioc, |
| ioc_info(ioc, "reply_pool(0x%p): free\n", |
| ioc->reply)); |
| ioc->reply = NULL; |
| } |
| |
| if (ioc->reply_free) { |
| dma_pool_free(ioc->reply_free_dma_pool, ioc->reply_free, |
| ioc->reply_free_dma); |
| dma_pool_destroy(ioc->reply_free_dma_pool); |
| dexitprintk(ioc, |
| ioc_info(ioc, "reply_free_pool(0x%p): free\n", |
| ioc->reply_free)); |
| ioc->reply_free = NULL; |
| } |
| |
| if (ioc->reply_post) { |
| dma_alloc_count = DIV_ROUND_UP(count, |
| RDPQ_MAX_INDEX_IN_ONE_CHUNK); |
| for (i = 0; i < count; i++) { |
| if (i % RDPQ_MAX_INDEX_IN_ONE_CHUNK == 0 |
| && dma_alloc_count) { |
| if (ioc->reply_post[i].reply_post_free) { |
| dma_pool_free( |
| ioc->reply_post_free_dma_pool, |
| ioc->reply_post[i].reply_post_free, |
| ioc->reply_post[i].reply_post_free_dma); |
| dexitprintk(ioc, ioc_info(ioc, |
| "reply_post_free_pool(0x%p): free\n", |
| ioc->reply_post[i].reply_post_free)); |
| ioc->reply_post[i].reply_post_free = |
| NULL; |
| } |
| --dma_alloc_count; |
| } |
| } |
| dma_pool_destroy(ioc->reply_post_free_dma_pool); |
| if (ioc->reply_post_free_array && |
| ioc->rdpq_array_enable) { |
| dma_pool_free(ioc->reply_post_free_array_dma_pool, |
| ioc->reply_post_free_array, |
| ioc->reply_post_free_array_dma); |
| ioc->reply_post_free_array = NULL; |
| } |
| dma_pool_destroy(ioc->reply_post_free_array_dma_pool); |
| kfree(ioc->reply_post); |
| } |
| |
| if (ioc->pcie_sgl_dma_pool) { |
| for (i = 0; i < ioc->scsiio_depth; i++) { |
| dma_pool_free(ioc->pcie_sgl_dma_pool, |
| ioc->pcie_sg_lookup[i].pcie_sgl, |
| ioc->pcie_sg_lookup[i].pcie_sgl_dma); |
| ioc->pcie_sg_lookup[i].pcie_sgl = NULL; |
| } |
| dma_pool_destroy(ioc->pcie_sgl_dma_pool); |
| } |
| if (ioc->config_page) { |
| dexitprintk(ioc, |
| ioc_info(ioc, "config_page(0x%p): free\n", |
| ioc->config_page)); |
| dma_free_coherent(&ioc->pdev->dev, ioc->config_page_sz, |
| ioc->config_page, ioc->config_page_dma); |
| } |
| |
| kfree(ioc->hpr_lookup); |
| ioc->hpr_lookup = NULL; |
| kfree(ioc->internal_lookup); |
| ioc->internal_lookup = NULL; |
| if (ioc->chain_lookup) { |
| for (i = 0; i < ioc->scsiio_depth; i++) { |
| for (j = ioc->chains_per_prp_buffer; |
| j < ioc->chains_needed_per_io; j++) { |
| ct = &ioc->chain_lookup[i].chains_per_smid[j]; |
| if (ct && ct->chain_buffer) |
| dma_pool_free(ioc->chain_dma_pool, |
| ct->chain_buffer, |
| ct->chain_buffer_dma); |
| } |
| kfree(ioc->chain_lookup[i].chains_per_smid); |
| } |
| dma_pool_destroy(ioc->chain_dma_pool); |
| kfree(ioc->chain_lookup); |
| ioc->chain_lookup = NULL; |
| } |
| } |
| |
| /** |
| * mpt3sas_check_same_4gb_region - checks whether all reply queues in a set are |
| * having same upper 32bits in their base memory address. |
| * @reply_pool_start_address: Base address of a reply queue set |
| * @pool_sz: Size of single Reply Descriptor Post Queues pool size |
| * |
| * Return: 1 if reply queues in a set have a same upper 32bits in their base |
| * memory address, else 0. |
| */ |
| |
| static int |
| mpt3sas_check_same_4gb_region(long reply_pool_start_address, u32 pool_sz) |
| { |
| long reply_pool_end_address; |
| |
| reply_pool_end_address = reply_pool_start_address + pool_sz; |
| |
| if (upper_32_bits(reply_pool_start_address) == |
| upper_32_bits(reply_pool_end_address)) |
| return 1; |
| else |
| return 0; |
| } |
| |
| /** |
| * _base_reduce_hba_queue_depth- Retry with reduced queue depth |
| * @ioc: Adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| **/ |
| static inline int |
| _base_reduce_hba_queue_depth(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int reduce_sz = 64; |
| |
| if ((ioc->hba_queue_depth - reduce_sz) > |
| (ioc->internal_depth + INTERNAL_SCSIIO_CMDS_COUNT)) { |
| ioc->hba_queue_depth -= reduce_sz; |
| return 0; |
| } else |
| return -ENOMEM; |
| } |
| |
| /** |
| * _base_allocate_pcie_sgl_pool - Allocating DMA'able memory |
| * for pcie sgl pools. |
| * @ioc: Adapter object |
| * @sz: DMA Pool size |
| * @ct: Chain tracker |
| * Return: 0 for success, non-zero for failure. |
| */ |
| |
| static int |
| _base_allocate_pcie_sgl_pool(struct MPT3SAS_ADAPTER *ioc, u32 sz) |
| { |
| int i = 0, j = 0; |
| struct chain_tracker *ct; |
| |
| ioc->pcie_sgl_dma_pool = |
| dma_pool_create("PCIe SGL pool", &ioc->pdev->dev, sz, |
| ioc->page_size, 0); |
| if (!ioc->pcie_sgl_dma_pool) { |
| ioc_err(ioc, "PCIe SGL pool: dma_pool_create failed\n"); |
| return -ENOMEM; |
| } |
| |
| ioc->chains_per_prp_buffer = sz/ioc->chain_segment_sz; |
| ioc->chains_per_prp_buffer = |
| min(ioc->chains_per_prp_buffer, ioc->chains_needed_per_io); |
| for (i = 0; i < ioc->scsiio_depth; i++) { |
| ioc->pcie_sg_lookup[i].pcie_sgl = |
| dma_pool_alloc(ioc->pcie_sgl_dma_pool, GFP_KERNEL, |
| &ioc->pcie_sg_lookup[i].pcie_sgl_dma); |
| if (!ioc->pcie_sg_lookup[i].pcie_sgl) { |
| ioc_err(ioc, "PCIe SGL pool: dma_pool_alloc failed\n"); |
| return -EAGAIN; |
| } |
| |
| if (!mpt3sas_check_same_4gb_region( |
| (long)ioc->pcie_sg_lookup[i].pcie_sgl, sz)) { |
| ioc_err(ioc, "PCIE SGLs are not in same 4G !! pcie sgl (0x%p) dma = (0x%llx)\n", |
| ioc->pcie_sg_lookup[i].pcie_sgl, |
| (unsigned long long) |
| ioc->pcie_sg_lookup[i].pcie_sgl_dma); |
| ioc->use_32bit_dma = true; |
| return -EAGAIN; |
| } |
| |
| for (j = 0; j < ioc->chains_per_prp_buffer; j++) { |
| ct = &ioc->chain_lookup[i].chains_per_smid[j]; |
| ct->chain_buffer = |
| ioc->pcie_sg_lookup[i].pcie_sgl + |
| (j * ioc->chain_segment_sz); |
| ct->chain_buffer_dma = |
| ioc->pcie_sg_lookup[i].pcie_sgl_dma + |
| (j * ioc->chain_segment_sz); |
| } |
| } |
| dinitprintk(ioc, ioc_info(ioc, |
| "PCIe sgl pool depth(%d), element_size(%d), pool_size(%d kB)\n", |
| ioc->scsiio_depth, sz, (sz * ioc->scsiio_depth)/1024)); |
| dinitprintk(ioc, ioc_info(ioc, |
| "Number of chains can fit in a PRP page(%d)\n", |
| ioc->chains_per_prp_buffer)); |
| return 0; |
| } |
| |
| /** |
| * base_alloc_rdpq_dma_pool - Allocating DMA'able memory |
| * for reply queues. |
| * @ioc: per adapter object |
| * @sz: DMA Pool size |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| base_alloc_rdpq_dma_pool(struct MPT3SAS_ADAPTER *ioc, int sz) |
| { |
| int i = 0; |
| u32 dma_alloc_count = 0; |
| int reply_post_free_sz = ioc->reply_post_queue_depth * |
| sizeof(Mpi2DefaultReplyDescriptor_t); |
| int count = ioc->rdpq_array_enable ? ioc->reply_queue_count : 1; |
| |
| ioc->reply_post = kcalloc(count, sizeof(struct reply_post_struct), |
| GFP_KERNEL); |
| if (!ioc->reply_post) |
| return -ENOMEM; |
| /* |
| * For INVADER_SERIES each set of 8 reply queues(0-7, 8-15, ..) and |
| * VENTURA_SERIES each set of 16 reply queues(0-15, 16-31, ..) should |
| * be within 4GB boundary i.e reply queues in a set must have same |
| * upper 32-bits in their memory address. so here driver is allocating |
| * the DMA'able memory for reply queues according. |
| * Driver uses limitation of |
| * VENTURA_SERIES to manage INVADER_SERIES as well. |
| */ |
| dma_alloc_count = DIV_ROUND_UP(count, |
| RDPQ_MAX_INDEX_IN_ONE_CHUNK); |
| ioc->reply_post_free_dma_pool = |
| dma_pool_create("reply_post_free pool", |
| &ioc->pdev->dev, sz, 16, 0); |
| if (!ioc->reply_post_free_dma_pool) |
| return -ENOMEM; |
| for (i = 0; i < count; i++) { |
| if ((i % RDPQ_MAX_INDEX_IN_ONE_CHUNK == 0) && dma_alloc_count) { |
| ioc->reply_post[i].reply_post_free = |
| dma_pool_zalloc(ioc->reply_post_free_dma_pool, |
| GFP_KERNEL, |
| &ioc->reply_post[i].reply_post_free_dma); |
| if (!ioc->reply_post[i].reply_post_free) |
| return -ENOMEM; |
| /* |
| * Each set of RDPQ pool must satisfy 4gb boundary |
| * restriction. |
| * 1) Check if allocated resources for RDPQ pool are in |
| * the same 4GB range. |
| * 2) If #1 is true, continue with 64 bit DMA. |
| * 3) If #1 is false, return 1. which means free all the |
| * resources and set DMA mask to 32 and allocate. |
| */ |
| if (!mpt3sas_check_same_4gb_region( |
| (long)ioc->reply_post[i].reply_post_free, sz)) { |
| dinitprintk(ioc, |
| ioc_err(ioc, "bad Replypost free pool(0x%p)" |
| "reply_post_free_dma = (0x%llx)\n", |
| ioc->reply_post[i].reply_post_free, |
| (unsigned long long) |
| ioc->reply_post[i].reply_post_free_dma)); |
| return -EAGAIN; |
| } |
| dma_alloc_count--; |
| |
| } else { |
| ioc->reply_post[i].reply_post_free = |
| (Mpi2ReplyDescriptorsUnion_t *) |
| ((long)ioc->reply_post[i-1].reply_post_free |
| + reply_post_free_sz); |
| ioc->reply_post[i].reply_post_free_dma = |
| (dma_addr_t) |
| (ioc->reply_post[i-1].reply_post_free_dma + |
| reply_post_free_sz); |
| } |
| } |
| return 0; |
| } |
| |
| /** |
| * _base_allocate_memory_pools - allocate start of day memory pools |
| * @ioc: per adapter object |
| * |
| * Return: 0 success, anything else error. |
| */ |
| static int |
| _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc) |
| { |
| struct mpt3sas_facts *facts; |
| u16 max_sge_elements; |
| u16 chains_needed_per_io; |
| u32 sz, total_sz, reply_post_free_sz, reply_post_free_array_sz; |
| u32 retry_sz; |
| u32 rdpq_sz = 0; |
| u16 max_request_credit, nvme_blocks_needed; |
| unsigned short sg_tablesize; |
| u16 sge_size; |
| int i, j; |
| int ret = 0, rc = 0; |
| struct chain_tracker *ct; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| |
| retry_sz = 0; |
| facts = &ioc->facts; |
| |
| /* command line tunables for max sgl entries */ |
| if (max_sgl_entries != -1) |
| sg_tablesize = max_sgl_entries; |
| else { |
| if (ioc->hba_mpi_version_belonged == MPI2_VERSION) |
| sg_tablesize = MPT2SAS_SG_DEPTH; |
| else |
| sg_tablesize = MPT3SAS_SG_DEPTH; |
| } |
| |
| /* max sgl entries <= MPT_KDUMP_MIN_PHYS_SEGMENTS in KDUMP mode */ |
| if (reset_devices) |
| sg_tablesize = min_t(unsigned short, sg_tablesize, |
| MPT_KDUMP_MIN_PHYS_SEGMENTS); |
| |
| if (ioc->is_mcpu_endpoint) |
| ioc->shost->sg_tablesize = MPT_MIN_PHYS_SEGMENTS; |
| else { |
| if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS) |
| sg_tablesize = MPT_MIN_PHYS_SEGMENTS; |
| else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) { |
| sg_tablesize = min_t(unsigned short, sg_tablesize, |
| SG_MAX_SEGMENTS); |
| ioc_warn(ioc, "sg_tablesize(%u) is bigger than kernel defined SG_CHUNK_SIZE(%u)\n", |
| sg_tablesize, MPT_MAX_PHYS_SEGMENTS); |
| } |
| ioc->shost->sg_tablesize = sg_tablesize; |
| } |
| |
| ioc->internal_depth = min_t(int, (facts->HighPriorityCredit + (5)), |
| (facts->RequestCredit / 4)); |
| if (ioc->internal_depth < INTERNAL_CMDS_COUNT) { |
| if (facts->RequestCredit <= (INTERNAL_CMDS_COUNT + |
| INTERNAL_SCSIIO_CMDS_COUNT)) { |
| ioc_err(ioc, "IOC doesn't have enough Request Credits, it has just %d number of credits\n", |
| facts->RequestCredit); |
| return -ENOMEM; |
| } |
| ioc->internal_depth = 10; |
| } |
| |
| ioc->hi_priority_depth = ioc->internal_depth - (5); |
| /* command line tunables for max controller queue depth */ |
| if (max_queue_depth != -1 && max_queue_depth != 0) { |
| max_request_credit = min_t(u16, max_queue_depth + |
| ioc->internal_depth, facts->RequestCredit); |
| if (max_request_credit > MAX_HBA_QUEUE_DEPTH) |
| max_request_credit = MAX_HBA_QUEUE_DEPTH; |
| } else if (reset_devices) |
| max_request_credit = min_t(u16, facts->RequestCredit, |
| (MPT3SAS_KDUMP_SCSI_IO_DEPTH + ioc->internal_depth)); |
| else |
| max_request_credit = min_t(u16, facts->RequestCredit, |
| MAX_HBA_QUEUE_DEPTH); |
| |
| /* Firmware maintains additional facts->HighPriorityCredit number of |
| * credits for HiPriprity Request messages, so hba queue depth will be |
| * sum of max_request_credit and high priority queue depth. |
| */ |
| ioc->hba_queue_depth = max_request_credit + ioc->hi_priority_depth; |
| |
| /* request frame size */ |
| ioc->request_sz = facts->IOCRequestFrameSize * 4; |
| |
| /* reply frame size */ |
| ioc->reply_sz = facts->ReplyFrameSize * 4; |
| |
| /* chain segment size */ |
| if (ioc->hba_mpi_version_belonged != MPI2_VERSION) { |
| if (facts->IOCMaxChainSegmentSize) |
| ioc->chain_segment_sz = |
| facts->IOCMaxChainSegmentSize * |
| MAX_CHAIN_ELEMT_SZ; |
| else |
| /* set to 128 bytes size if IOCMaxChainSegmentSize is zero */ |
| ioc->chain_segment_sz = DEFAULT_NUM_FWCHAIN_ELEMTS * |
| MAX_CHAIN_ELEMT_SZ; |
| } else |
| ioc->chain_segment_sz = ioc->request_sz; |
| |
| /* calculate the max scatter element size */ |
| sge_size = max_t(u16, ioc->sge_size, ioc->sge_size_ieee); |
| |
| retry_allocation: |
| total_sz = 0; |
| /* calculate number of sg elements left over in the 1st frame */ |
| max_sge_elements = ioc->request_sz - ((sizeof(Mpi2SCSIIORequest_t) - |
| sizeof(Mpi2SGEIOUnion_t)) + sge_size); |
| ioc->max_sges_in_main_message = max_sge_elements/sge_size; |
| |
| /* now do the same for a chain buffer */ |
| max_sge_elements = ioc->chain_segment_sz - sge_size; |
| ioc->max_sges_in_chain_message = max_sge_elements/sge_size; |
| |
| /* |
| * MPT3SAS_SG_DEPTH = CONFIG_FUSION_MAX_SGE |
| */ |
| chains_needed_per_io = ((ioc->shost->sg_tablesize - |
| ioc->max_sges_in_main_message)/ioc->max_sges_in_chain_message) |
| + 1; |
| if (chains_needed_per_io > facts->MaxChainDepth) { |
| chains_needed_per_io = facts->MaxChainDepth; |
| ioc->shost->sg_tablesize = min_t(u16, |
| ioc->max_sges_in_main_message + (ioc->max_sges_in_chain_message |
| * chains_needed_per_io), ioc->shost->sg_tablesize); |
| } |
| ioc->chains_needed_per_io = chains_needed_per_io; |
| |
| /* reply free queue sizing - taking into account for 64 FW events */ |
| ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; |
| |
| /* mCPU manage single counters for simplicity */ |
| if (ioc->is_mcpu_endpoint) |
| ioc->reply_post_queue_depth = ioc->reply_free_queue_depth; |
| else { |
| /* calculate reply descriptor post queue depth */ |
| ioc->reply_post_queue_depth = ioc->hba_queue_depth + |
| ioc->reply_free_queue_depth + 1; |
| /* align the reply post queue on the next 16 count boundary */ |
| if (ioc->reply_post_queue_depth % 16) |
| ioc->reply_post_queue_depth += 16 - |
| (ioc->reply_post_queue_depth % 16); |
| } |
| |
| if (ioc->reply_post_queue_depth > |
| facts->MaxReplyDescriptorPostQueueDepth) { |
| ioc->reply_post_queue_depth = |
| facts->MaxReplyDescriptorPostQueueDepth - |
| (facts->MaxReplyDescriptorPostQueueDepth % 16); |
| ioc->hba_queue_depth = |
| ((ioc->reply_post_queue_depth - 64) / 2) - 1; |
| ioc->reply_free_queue_depth = ioc->hba_queue_depth + 64; |
| } |
| |
| ioc_info(ioc, |
| "scatter gather: sge_in_main_msg(%d), sge_per_chain(%d), " |
| "sge_per_io(%d), chains_per_io(%d)\n", |
| ioc->max_sges_in_main_message, |
| ioc->max_sges_in_chain_message, |
| ioc->shost->sg_tablesize, |
| ioc->chains_needed_per_io); |
| |
| /* reply post queue, 16 byte align */ |
| reply_post_free_sz = ioc->reply_post_queue_depth * |
| sizeof(Mpi2DefaultReplyDescriptor_t); |
| rdpq_sz = reply_post_free_sz * RDPQ_MAX_INDEX_IN_ONE_CHUNK; |
| if (_base_is_controller_msix_enabled(ioc) && !ioc->rdpq_array_enable) |
| rdpq_sz = reply_post_free_sz * ioc->reply_queue_count; |
| ret = base_alloc_rdpq_dma_pool(ioc, rdpq_sz); |
| if (ret == -EAGAIN) { |
| /* |
| * Free allocated bad RDPQ memory pools. |
| * Change dma coherent mask to 32 bit and reallocate RDPQ |
| */ |
| _base_release_memory_pools(ioc); |
| ioc->use_32bit_dma = true; |
| if (_base_config_dma_addressing(ioc, ioc->pdev) != 0) { |
| ioc_err(ioc, |
| "32 DMA mask failed %s\n", pci_name(ioc->pdev)); |
| return -ENODEV; |
| } |
| if (base_alloc_rdpq_dma_pool(ioc, rdpq_sz)) |
| return -ENOMEM; |
| } else if (ret == -ENOMEM) |
| return -ENOMEM; |
| total_sz = rdpq_sz * (!ioc->rdpq_array_enable ? 1 : |
| DIV_ROUND_UP(ioc->reply_queue_count, RDPQ_MAX_INDEX_IN_ONE_CHUNK)); |
| ioc->scsiio_depth = ioc->hba_queue_depth - |
| ioc->hi_priority_depth - ioc->internal_depth; |
| |
| /* set the scsi host can_queue depth |
| * with some internal commands that could be outstanding |
| */ |
| ioc->shost->can_queue = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT; |
| dinitprintk(ioc, |
| ioc_info(ioc, "scsi host: can_queue depth (%d)\n", |
| ioc->shost->can_queue)); |
| |
| /* contiguous pool for request and chains, 16 byte align, one extra " |
| * "frame for smid=0 |
| */ |
| ioc->chain_depth = ioc->chains_needed_per_io * ioc->scsiio_depth; |
| sz = ((ioc->scsiio_depth + 1) * ioc->request_sz); |
| |
| /* hi-priority queue */ |
| sz += (ioc->hi_priority_depth * ioc->request_sz); |
| |
| /* internal queue */ |
| sz += (ioc->internal_depth * ioc->request_sz); |
| |
| ioc->request_dma_sz = sz; |
| ioc->request = dma_alloc_coherent(&ioc->pdev->dev, sz, |
| &ioc->request_dma, GFP_KERNEL); |
| if (!ioc->request) { |
| ioc_err(ioc, "request pool: dma_alloc_coherent failed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), total(%d kB)\n", |
| ioc->hba_queue_depth, ioc->chains_needed_per_io, |
| ioc->request_sz, sz / 1024); |
| if (ioc->scsiio_depth < MPT3SAS_SAS_QUEUE_DEPTH) |
| goto out; |
| retry_sz = 64; |
| ioc->hba_queue_depth -= retry_sz; |
| _base_release_memory_pools(ioc); |
| goto retry_allocation; |
| } |
| |
| if (retry_sz) |
| ioc_err(ioc, "request pool: dma_alloc_coherent succeed: hba_depth(%d), chains_per_io(%d), frame_sz(%d), total(%d kb)\n", |
| ioc->hba_queue_depth, ioc->chains_needed_per_io, |
| ioc->request_sz, sz / 1024); |
| |
| /* hi-priority queue */ |
| ioc->hi_priority = ioc->request + ((ioc->scsiio_depth + 1) * |
| ioc->request_sz); |
| ioc->hi_priority_dma = ioc->request_dma + ((ioc->scsiio_depth + 1) * |
| ioc->request_sz); |
| |
| /* internal queue */ |
| ioc->internal = ioc->hi_priority + (ioc->hi_priority_depth * |
| ioc->request_sz); |
| ioc->internal_dma = ioc->hi_priority_dma + (ioc->hi_priority_depth * |
| ioc->request_sz); |
| |
| ioc_info(ioc, |
| "request pool(0x%p) - dma(0x%llx): " |
| "depth(%d), frame_size(%d), pool_size(%d kB)\n", |
| ioc->request, (unsigned long long) ioc->request_dma, |
| ioc->hba_queue_depth, ioc->request_sz, |
| (ioc->hba_queue_depth * ioc->request_sz) / 1024); |
| |
| total_sz += sz; |
| |
| dinitprintk(ioc, |
| ioc_info(ioc, "scsiio(0x%p): depth(%d)\n", |
| ioc->request, ioc->scsiio_depth)); |
| |
| ioc->chain_depth = min_t(u32, ioc->chain_depth, MAX_CHAIN_DEPTH); |
| sz = ioc->scsiio_depth * sizeof(struct chain_lookup); |
| ioc->chain_lookup = kzalloc(sz, GFP_KERNEL); |
| if (!ioc->chain_lookup) { |
| ioc_err(ioc, "chain_lookup: __get_free_pages failed\n"); |
| goto out; |
| } |
| |
| sz = ioc->chains_needed_per_io * sizeof(struct chain_tracker); |
| for (i = 0; i < ioc->scsiio_depth; i++) { |
| ioc->chain_lookup[i].chains_per_smid = kzalloc(sz, GFP_KERNEL); |
| if (!ioc->chain_lookup[i].chains_per_smid) { |
| ioc_err(ioc, "chain_lookup: kzalloc failed\n"); |
| goto out; |
| } |
| } |
| |
| /* initialize hi-priority queue smid's */ |
| ioc->hpr_lookup = kcalloc(ioc->hi_priority_depth, |
| sizeof(struct request_tracker), GFP_KERNEL); |
| if (!ioc->hpr_lookup) { |
| ioc_err(ioc, "hpr_lookup: kcalloc failed\n"); |
| goto out; |
| } |
| ioc->hi_priority_smid = ioc->scsiio_depth + 1; |
| dinitprintk(ioc, |
| ioc_info(ioc, "hi_priority(0x%p): depth(%d), start smid(%d)\n", |
| ioc->hi_priority, |
| ioc->hi_priority_depth, ioc->hi_priority_smid)); |
| |
| /* initialize internal queue smid's */ |
| ioc->internal_lookup = kcalloc(ioc->internal_depth, |
| sizeof(struct request_tracker), GFP_KERNEL); |
| if (!ioc->internal_lookup) { |
| ioc_err(ioc, "internal_lookup: kcalloc failed\n"); |
| goto out; |
| } |
| ioc->internal_smid = ioc->hi_priority_smid + ioc->hi_priority_depth; |
| dinitprintk(ioc, |
| ioc_info(ioc, "internal(0x%p): depth(%d), start smid(%d)\n", |
| ioc->internal, |
| ioc->internal_depth, ioc->internal_smid)); |
| /* |
| * The number of NVMe page sized blocks needed is: |
| * (((sg_tablesize * 8) - 1) / (page_size - 8)) + 1 |
| * ((sg_tablesize * 8) - 1) is the max PRP's minus the first PRP entry |
| * that is placed in the main message frame. 8 is the size of each PRP |
| * entry or PRP list pointer entry. 8 is subtracted from page_size |
| * because of the PRP list pointer entry at the end of a page, so this |
| * is not counted as a PRP entry. The 1 added page is a round up. |
| * |
| * To avoid allocation failures due to the amount of memory that could |
| * be required for NVMe PRP's, only each set of NVMe blocks will be |
| * contiguous, so a new set is allocated for each possible I/O. |
| */ |
| |
| ioc->chains_per_prp_buffer = 0; |
| if (ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES) { |
| nvme_blocks_needed = |
| (ioc->shost->sg_tablesize * NVME_PRP_SIZE) - 1; |
| nvme_blocks_needed /= (ioc->page_size - NVME_PRP_SIZE); |
| nvme_blocks_needed++; |
| |
| sz = sizeof(struct pcie_sg_list) * ioc->scsiio_depth; |
| ioc->pcie_sg_lookup = kzalloc(sz, GFP_KERNEL); |
| if (!ioc->pcie_sg_lookup) { |
| ioc_info(ioc, "PCIe SGL lookup: kzalloc failed\n"); |
| goto out; |
| } |
| sz = nvme_blocks_needed * ioc->page_size; |
| rc = _base_allocate_pcie_sgl_pool(ioc, sz); |
| if (rc == -ENOMEM) |
| return -ENOMEM; |
| else if (rc == -EAGAIN) |
| goto try_32bit_dma; |
| total_sz += sz * ioc->scsiio_depth; |
| } |
| |
| ioc->chain_dma_pool = dma_pool_create("chain pool", &ioc->pdev->dev, |
| ioc->chain_segment_sz, 16, 0); |
| if (!ioc->chain_dma_pool) { |
| ioc_err(ioc, "chain_dma_pool: dma_pool_create failed\n"); |
| goto out; |
| } |
| for (i = 0; i < ioc->scsiio_depth; i++) { |
| for (j = ioc->chains_per_prp_buffer; |
| j < ioc->chains_needed_per_io; j++) { |
| ct = &ioc->chain_lookup[i].chains_per_smid[j]; |
| ct->chain_buffer = dma_pool_alloc( |
| ioc->chain_dma_pool, GFP_KERNEL, |
| &ct->chain_buffer_dma); |
| if (!ct->chain_buffer) { |
| ioc_err(ioc, "chain_lookup: pci_pool_alloc failed\n"); |
| goto out; |
| } |
| } |
| total_sz += ioc->chain_segment_sz; |
| } |
| |
| dinitprintk(ioc, |
| ioc_info(ioc, "chain pool depth(%d), frame_size(%d), pool_size(%d kB)\n", |
| ioc->chain_depth, ioc->chain_segment_sz, |
| (ioc->chain_depth * ioc->chain_segment_sz) / 1024)); |
| |
| /* sense buffers, 4 byte align */ |
| sz = ioc->scsiio_depth * SCSI_SENSE_BUFFERSIZE; |
| ioc->sense_dma_pool = dma_pool_create("sense pool", &ioc->pdev->dev, sz, |
| 4, 0); |
| if (!ioc->sense_dma_pool) { |
| ioc_err(ioc, "sense pool: dma_pool_create failed\n"); |
| goto out; |
| } |
| ioc->sense = dma_pool_alloc(ioc->sense_dma_pool, GFP_KERNEL, |
| &ioc->sense_dma); |
| if (!ioc->sense) { |
| ioc_err(ioc, "sense pool: dma_pool_alloc failed\n"); |
| goto out; |
| } |
| /* sense buffer requires to be in same 4 gb region. |
| * Below function will check the same. |
| * In case of failure, new pci pool will be created with updated |
| * alignment. Older allocation and pool will be destroyed. |
| * Alignment will be used such a way that next allocation if |
| * success, will always meet same 4gb region requirement. |
| * Actual requirement is not alignment, but we need start and end of |
| * DMA address must have same upper 32 bit address. |
| */ |
| if (!mpt3sas_check_same_4gb_region((long)ioc->sense, sz)) { |
| //Release Sense pool & Reallocate |
| dma_pool_free(ioc->sense_dma_pool, ioc->sense, ioc->sense_dma); |
| dma_pool_destroy(ioc->sense_dma_pool); |
| ioc->sense = NULL; |
| |
| ioc->sense_dma_pool = |
| dma_pool_create("sense pool", &ioc->pdev->dev, sz, |
| roundup_pow_of_two(sz), 0); |
| if (!ioc->sense_dma_pool) { |
| ioc_err(ioc, "sense pool: pci_pool_create failed\n"); |
| goto out; |
| } |
| ioc->sense = dma_pool_alloc(ioc->sense_dma_pool, GFP_KERNEL, |
| &ioc->sense_dma); |
| if (!ioc->sense) { |
| ioc_err(ioc, "sense pool: pci_pool_alloc failed\n"); |
| goto out; |
| } |
| } |
| ioc_info(ioc, |
| "sense pool(0x%p)- dma(0x%llx): depth(%d)," |
| "element_size(%d), pool_size(%d kB)\n", |
| ioc->sense, (unsigned long long)ioc->sense_dma, ioc->scsiio_depth, |
| SCSI_SENSE_BUFFERSIZE, sz / 1024); |
| |
| total_sz += sz; |
| |
| /* reply pool, 4 byte align */ |
| sz = ioc->reply_free_queue_depth * ioc->reply_sz; |
| ioc->reply_dma_pool = dma_pool_create("reply pool", &ioc->pdev->dev, sz, |
| 4, 0); |
| if (!ioc->reply_dma_pool) { |
| ioc_err(ioc, "reply pool: dma_pool_create failed\n"); |
| goto out; |
| } |
| ioc->reply = dma_pool_alloc(ioc->reply_dma_pool, GFP_KERNEL, |
| &ioc->reply_dma); |
| if (!ioc->reply) { |
| ioc_err(ioc, "reply pool: dma_pool_alloc failed\n"); |
| goto out; |
| } |
| ioc->reply_dma_min_address = (u32)(ioc->reply_dma); |
| ioc->reply_dma_max_address = (u32)(ioc->reply_dma) + sz; |
| dinitprintk(ioc, |
| ioc_info(ioc, "reply pool(0x%p): depth(%d), frame_size(%d), pool_size(%d kB)\n", |
| ioc->reply, ioc->reply_free_queue_depth, |
| ioc->reply_sz, sz / 1024)); |
| dinitprintk(ioc, |
| ioc_info(ioc, "reply_dma(0x%llx)\n", |
| (unsigned long long)ioc->reply_dma)); |
| total_sz += sz; |
| |
| /* reply free queue, 16 byte align */ |
| sz = ioc->reply_free_queue_depth * 4; |
| ioc->reply_free_dma_pool = dma_pool_create("reply_free pool", |
| &ioc->pdev->dev, sz, 16, 0); |
| if (!ioc->reply_free_dma_pool) { |
| ioc_err(ioc, "reply_free pool: dma_pool_create failed\n"); |
| goto out; |
| } |
| ioc->reply_free = dma_pool_zalloc(ioc->reply_free_dma_pool, GFP_KERNEL, |
| &ioc->reply_free_dma); |
| if (!ioc->reply_free) { |
| ioc_err(ioc, "reply_free pool: dma_pool_alloc failed\n"); |
| goto out; |
| } |
| dinitprintk(ioc, |
| ioc_info(ioc, "reply_free pool(0x%p): depth(%d), element_size(%d), pool_size(%d kB)\n", |
| ioc->reply_free, ioc->reply_free_queue_depth, |
| 4, sz / 1024)); |
| dinitprintk(ioc, |
| ioc_info(ioc, "reply_free_dma (0x%llx)\n", |
| (unsigned long long)ioc->reply_free_dma)); |
| total_sz += sz; |
| |
| if (ioc->rdpq_array_enable) { |
| reply_post_free_array_sz = ioc->reply_queue_count * |
| sizeof(Mpi2IOCInitRDPQArrayEntry); |
| ioc->reply_post_free_array_dma_pool = |
| dma_pool_create("reply_post_free_array pool", |
| &ioc->pdev->dev, reply_post_free_array_sz, 16, 0); |
| if (!ioc->reply_post_free_array_dma_pool) { |
| dinitprintk(ioc, |
| ioc_info(ioc, "reply_post_free_array pool: dma_pool_create failed\n")); |
| goto out; |
| } |
| ioc->reply_post_free_array = |
| dma_pool_alloc(ioc->reply_post_free_array_dma_pool, |
| GFP_KERNEL, &ioc->reply_post_free_array_dma); |
| if (!ioc->reply_post_free_array) { |
| dinitprintk(ioc, |
| ioc_info(ioc, "reply_post_free_array pool: dma_pool_alloc failed\n")); |
| goto out; |
| } |
| } |
| ioc->config_page_sz = 512; |
| ioc->config_page = dma_alloc_coherent(&ioc->pdev->dev, |
| ioc->config_page_sz, &ioc->config_page_dma, GFP_KERNEL); |
| if (!ioc->config_page) { |
| ioc_err(ioc, "config page: dma_pool_alloc failed\n"); |
| goto out; |
| } |
| |
| ioc_info(ioc, "config page(0x%p) - dma(0x%llx): size(%d)\n", |
| ioc->config_page, (unsigned long long)ioc->config_page_dma, |
| ioc->config_page_sz); |
| total_sz += ioc->config_page_sz; |
| |
| ioc_info(ioc, "Allocated physical memory: size(%d kB)\n", |
| total_sz / 1024); |
| ioc_info(ioc, "Current Controller Queue Depth(%d),Max Controller Queue Depth(%d)\n", |
| ioc->shost->can_queue, facts->RequestCredit); |
| ioc_info(ioc, "Scatter Gather Elements per IO(%d)\n", |
| ioc->shost->sg_tablesize); |
| return 0; |
| |
| try_32bit_dma: |
| _base_release_memory_pools(ioc); |
| if (ioc->use_32bit_dma && (ioc->dma_mask > 32)) { |
| /* Change dma coherent mask to 32 bit and reallocate */ |
| if (_base_config_dma_addressing(ioc, ioc->pdev) != 0) { |
| pr_err("Setting 32 bit coherent DMA mask Failed %s\n", |
| pci_name(ioc->pdev)); |
| return -ENODEV; |
| } |
| } else if (_base_reduce_hba_queue_depth(ioc) != 0) |
| return -ENOMEM; |
| goto retry_allocation; |
| |
| out: |
| return -ENOMEM; |
| } |
| |
| /** |
| * mpt3sas_base_get_iocstate - Get the current state of a MPT adapter. |
| * @ioc: Pointer to MPT_ADAPTER structure |
| * @cooked: Request raw or cooked IOC state |
| * |
| * Return: all IOC Doorbell register bits if cooked==0, else just the |
| * Doorbell bits in MPI_IOC_STATE_MASK. |
| */ |
| u32 |
| mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked) |
| { |
| u32 s, sc; |
| |
| s = ioc->base_readl(&ioc->chip->Doorbell); |
| sc = s & MPI2_IOC_STATE_MASK; |
| return cooked ? sc : s; |
| } |
| |
| /** |
| * _base_wait_on_iocstate - waiting on a particular ioc state |
| * @ioc: ? |
| * @ioc_state: controller state { READY, OPERATIONAL, or RESET } |
| * @timeout: timeout in second |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_wait_on_iocstate(struct MPT3SAS_ADAPTER *ioc, u32 ioc_state, int timeout) |
| { |
| u32 count, cntdn; |
| u32 current_state; |
| |
| count = 0; |
| cntdn = 1000 * timeout; |
| do { |
| current_state = mpt3sas_base_get_iocstate(ioc, 1); |
| if (current_state == ioc_state) |
| return 0; |
| if (count && current_state == MPI2_IOC_STATE_FAULT) |
| break; |
| if (count && current_state == MPI2_IOC_STATE_COREDUMP) |
| break; |
| |
| usleep_range(1000, 1500); |
| count++; |
| } while (--cntdn); |
| |
| return current_state; |
| } |
| |
| /** |
| * _base_dump_reg_set - This function will print hexdump of register set. |
| * @ioc: per adapter object |
| * |
| * Returns nothing. |
| */ |
| static inline void |
| _base_dump_reg_set(struct MPT3SAS_ADAPTER *ioc) |
| { |
| unsigned int i, sz = 256; |
| u32 __iomem *reg = (u32 __iomem *)ioc->chip; |
| |
| ioc_info(ioc, "System Register set:\n"); |
| for (i = 0; i < (sz / sizeof(u32)); i++) |
| pr_info("%08x: %08x\n", (i * 4), readl(®[i])); |
| } |
| |
| /** |
| * _base_wait_for_doorbell_int - waiting for controller interrupt(generated by |
| * a write to the doorbell) |
| * @ioc: per adapter object |
| * @timeout: timeout in seconds |
| * |
| * Return: 0 for success, non-zero for failure. |
| * |
| * Notes: MPI2_HIS_IOC2SYS_DB_STATUS - set to one when IOC writes to doorbell. |
| */ |
| |
| static int |
| _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout) |
| { |
| u32 cntdn, count; |
| u32 int_status; |
| |
| count = 0; |
| cntdn = 1000 * timeout; |
| do { |
| int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus); |
| if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { |
| dhsprintk(ioc, |
| ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", |
| __func__, count, timeout)); |
| return 0; |
| } |
| |
| usleep_range(1000, 1500); |
| count++; |
| } while (--cntdn); |
| |
| ioc_err(ioc, "%s: failed due to timeout count(%d), int_status(%x)!\n", |
| __func__, count, int_status); |
| return -EFAULT; |
| } |
| |
| static int |
| _base_spin_on_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout) |
| { |
| u32 cntdn, count; |
| u32 int_status; |
| |
| count = 0; |
| cntdn = 2000 * timeout; |
| do { |
| int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus); |
| if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { |
| dhsprintk(ioc, |
| ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", |
| __func__, count, timeout)); |
| return 0; |
| } |
| |
| udelay(500); |
| count++; |
| } while (--cntdn); |
| |
| ioc_err(ioc, "%s: failed due to timeout count(%d), int_status(%x)!\n", |
| __func__, count, int_status); |
| return -EFAULT; |
| |
| } |
| |
| /** |
| * _base_wait_for_doorbell_ack - waiting for controller to read the doorbell. |
| * @ioc: per adapter object |
| * @timeout: timeout in second |
| * |
| * Return: 0 for success, non-zero for failure. |
| * |
| * Notes: MPI2_HIS_SYS2IOC_DB_STATUS - set to one when host writes to |
| * doorbell. |
| */ |
| static int |
| _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout) |
| { |
| u32 cntdn, count; |
| u32 int_status; |
| u32 doorbell; |
| |
| count = 0; |
| cntdn = 1000 * timeout; |
| do { |
| int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus); |
| if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) { |
| dhsprintk(ioc, |
| ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", |
| __func__, count, timeout)); |
| return 0; |
| } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) { |
| doorbell = ioc->base_readl(&ioc->chip->Doorbell); |
| if ((doorbell & MPI2_IOC_STATE_MASK) == |
| MPI2_IOC_STATE_FAULT) { |
| mpt3sas_print_fault_code(ioc, doorbell); |
| return -EFAULT; |
| } |
| if ((doorbell & MPI2_IOC_STATE_MASK) == |
| MPI2_IOC_STATE_COREDUMP) { |
| mpt3sas_print_coredump_info(ioc, doorbell); |
| return -EFAULT; |
| } |
| } else if (int_status == 0xFFFFFFFF) |
| goto out; |
| |
| usleep_range(1000, 1500); |
| count++; |
| } while (--cntdn); |
| |
| out: |
| ioc_err(ioc, "%s: failed due to timeout count(%d), int_status(%x)!\n", |
| __func__, count, int_status); |
| return -EFAULT; |
| } |
| |
| /** |
| * _base_wait_for_doorbell_not_used - waiting for doorbell to not be in use |
| * @ioc: per adapter object |
| * @timeout: timeout in second |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout) |
| { |
| u32 cntdn, count; |
| u32 doorbell_reg; |
| |
| count = 0; |
| cntdn = 1000 * timeout; |
| do { |
| doorbell_reg = ioc->base_readl(&ioc->chip->Doorbell); |
| if (!(doorbell_reg & MPI2_DOORBELL_USED)) { |
| dhsprintk(ioc, |
| ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n", |
| __func__, count, timeout)); |
| return 0; |
| } |
| |
| usleep_range(1000, 1500); |
| count++; |
| } while (--cntdn); |
| |
| ioc_err(ioc, "%s: failed due to timeout count(%d), doorbell_reg(%x)!\n", |
| __func__, count, doorbell_reg); |
| return -EFAULT; |
| } |
| |
| /** |
| * _base_send_ioc_reset - send doorbell reset |
| * @ioc: per adapter object |
| * @reset_type: currently only supports: MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET |
| * @timeout: timeout in second |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_send_ioc_reset(struct MPT3SAS_ADAPTER *ioc, u8 reset_type, int timeout) |
| { |
| u32 ioc_state; |
| int r = 0; |
| unsigned long flags; |
| |
| if (reset_type != MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET) { |
| ioc_err(ioc, "%s: unknown reset_type\n", __func__); |
| return -EFAULT; |
| } |
| |
| if (!(ioc->facts.IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY)) |
| return -EFAULT; |
| |
| ioc_info(ioc, "sending message unit reset !!\n"); |
| |
| writel(reset_type << MPI2_DOORBELL_FUNCTION_SHIFT, |
| &ioc->chip->Doorbell); |
| if ((_base_wait_for_doorbell_ack(ioc, 15))) { |
| r = -EFAULT; |
| goto out; |
| } |
| |
| ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout); |
| if (ioc_state) { |
| ioc_err(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n", |
| __func__, ioc_state); |
| r = -EFAULT; |
| goto out; |
| } |
| out: |
| if (r != 0) { |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| /* |
| * Wait for IOC state CoreDump to clear only during |
| * HBA initialization & release time. |
| */ |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == |
| MPI2_IOC_STATE_COREDUMP && (ioc->is_driver_loading == 1 || |
| ioc->fault_reset_work_q == NULL)) { |
| spin_unlock_irqrestore( |
| &ioc->ioc_reset_in_progress_lock, flags); |
| mpt3sas_print_coredump_info(ioc, ioc_state); |
| mpt3sas_base_wait_for_coredump_completion(ioc, |
| __func__); |
| spin_lock_irqsave( |
| &ioc->ioc_reset_in_progress_lock, flags); |
| } |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| } |
| ioc_info(ioc, "message unit reset: %s\n", |
| r == 0 ? "SUCCESS" : "FAILED"); |
| return r; |
| } |
| |
| /** |
| * mpt3sas_wait_for_ioc - IOC's operational state is checked here. |
| * @ioc: per adapter object |
| * @timeout: timeout in seconds |
| * |
| * Return: Waits up to timeout seconds for the IOC to |
| * become operational. Returns 0 if IOC is present |
| * and operational; otherwise returns -EFAULT. |
| */ |
| |
| int |
| mpt3sas_wait_for_ioc(struct MPT3SAS_ADAPTER *ioc, int timeout) |
| { |
| int wait_state_count = 0; |
| u32 ioc_state; |
| |
| do { |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 1); |
| if (ioc_state == MPI2_IOC_STATE_OPERATIONAL) |
| break; |
| ssleep(1); |
| ioc_info(ioc, "%s: waiting for operational state(count=%d)\n", |
| __func__, ++wait_state_count); |
| } while (--timeout); |
| if (!timeout) { |
| ioc_err(ioc, "%s: failed due to ioc not operational\n", __func__); |
| return -EFAULT; |
| } |
| if (wait_state_count) |
| ioc_info(ioc, "ioc is operational\n"); |
| return 0; |
| } |
| |
| /** |
| * _base_handshake_req_reply_wait - send request thru doorbell interface |
| * @ioc: per adapter object |
| * @request_bytes: request length |
| * @request: pointer having request payload |
| * @reply_bytes: reply length |
| * @reply: pointer to reply payload |
| * @timeout: timeout in second |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes, |
| u32 *request, int reply_bytes, u16 *reply, int timeout) |
| { |
| MPI2DefaultReply_t *default_reply = (MPI2DefaultReply_t *)reply; |
| int i; |
| u8 failed; |
| __le32 *mfp; |
| |
| /* make sure doorbell is not in use */ |
| if ((ioc->base_readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) { |
| ioc_err(ioc, "doorbell is in use (line=%d)\n", __LINE__); |
| return -EFAULT; |
| } |
| |
| /* clear pending doorbell interrupts from previous state changes */ |
| if (ioc->base_readl(&ioc->chip->HostInterruptStatus) & |
| MPI2_HIS_IOC2SYS_DB_STATUS) |
| writel(0, &ioc->chip->HostInterruptStatus); |
| |
| /* send message to ioc */ |
| writel(((MPI2_FUNCTION_HANDSHAKE<<MPI2_DOORBELL_FUNCTION_SHIFT) | |
| ((request_bytes/4)<<MPI2_DOORBELL_ADD_DWORDS_SHIFT)), |
| &ioc->chip->Doorbell); |
| |
| if ((_base_spin_on_doorbell_int(ioc, 5))) { |
| ioc_err(ioc, "doorbell handshake int failed (line=%d)\n", |
| __LINE__); |
| return -EFAULT; |
| } |
| writel(0, &ioc->chip->HostInterruptStatus); |
| |
| if ((_base_wait_for_doorbell_ack(ioc, 5))) { |
| ioc_err(ioc, "doorbell handshake ack failed (line=%d)\n", |
| __LINE__); |
| return -EFAULT; |
| } |
| |
| /* send message 32-bits at a time */ |
| for (i = 0, failed = 0; i < request_bytes/4 && !failed; i++) { |
| writel(cpu_to_le32(request[i]), &ioc->chip->Doorbell); |
| if ((_base_wait_for_doorbell_ack(ioc, 5))) |
| failed = 1; |
| } |
| |
| if (failed) { |
| ioc_err(ioc, "doorbell handshake sending request failed (line=%d)\n", |
| __LINE__); |
| return -EFAULT; |
| } |
| |
| /* now wait for the reply */ |
| if ((_base_wait_for_doorbell_int(ioc, timeout))) { |
| ioc_err(ioc, "doorbell handshake int failed (line=%d)\n", |
| __LINE__); |
| return -EFAULT; |
| } |
| |
| /* read the first two 16-bits, it gives the total length of the reply */ |
| reply[0] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell) |
| & MPI2_DOORBELL_DATA_MASK); |
| writel(0, &ioc->chip->HostInterruptStatus); |
| if ((_base_wait_for_doorbell_int(ioc, 5))) { |
| ioc_err(ioc, "doorbell handshake int failed (line=%d)\n", |
| __LINE__); |
| return -EFAULT; |
| } |
| reply[1] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell) |
| & MPI2_DOORBELL_DATA_MASK); |
| writel(0, &ioc->chip->HostInterruptStatus); |
| |
| for (i = 2; i < default_reply->MsgLength * 2; i++) { |
| if ((_base_wait_for_doorbell_int(ioc, 5))) { |
| ioc_err(ioc, "doorbell handshake int failed (line=%d)\n", |
| __LINE__); |
| return -EFAULT; |
| } |
| if (i >= reply_bytes/2) /* overflow case */ |
| ioc->base_readl(&ioc->chip->Doorbell); |
| else |
| reply[i] = le16_to_cpu( |
| ioc->base_readl(&ioc->chip->Doorbell) |
| & MPI2_DOORBELL_DATA_MASK); |
| writel(0, &ioc->chip->HostInterruptStatus); |
| } |
| |
| _base_wait_for_doorbell_int(ioc, 5); |
| if (_base_wait_for_doorbell_not_used(ioc, 5) != 0) { |
| dhsprintk(ioc, |
| ioc_info(ioc, "doorbell is in use (line=%d)\n", |
| __LINE__)); |
| } |
| writel(0, &ioc->chip->HostInterruptStatus); |
| |
| if (ioc->logging_level & MPT_DEBUG_INIT) { |
| mfp = (__le32 *)reply; |
| pr_info("\toffset:data\n"); |
| for (i = 0; i < reply_bytes/4; i++) |
| ioc_info(ioc, "\t[0x%02x]:%08x\n", i*4, |
| le32_to_cpu(mfp[i])); |
| } |
| return 0; |
| } |
| |
| /** |
| * mpt3sas_base_sas_iounit_control - send sas iounit control to FW |
| * @ioc: per adapter object |
| * @mpi_reply: the reply payload from FW |
| * @mpi_request: the request payload sent to FW |
| * |
| * The SAS IO Unit Control Request message allows the host to perform low-level |
| * operations, such as resets on the PHYs of the IO Unit, also allows the host |
| * to obtain the IOC assigned device handles for a device if it has other |
| * identifying information about the device, in addition allows the host to |
| * remove IOC resources associated with the device. |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_sas_iounit_control(struct MPT3SAS_ADAPTER *ioc, |
| Mpi2SasIoUnitControlReply_t *mpi_reply, |
| Mpi2SasIoUnitControlRequest_t *mpi_request) |
| { |
| u16 smid; |
| u8 issue_reset = 0; |
| int rc; |
| void *request; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| mutex_lock(&ioc->base_cmds.mutex); |
| |
| if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) { |
| ioc_err(ioc, "%s: base_cmd in use\n", __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); |
| if (rc) |
| goto out; |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); |
| if (!smid) { |
| ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| rc = 0; |
| ioc->base_cmds.status = MPT3_CMD_PENDING; |
| request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->base_cmds.smid = smid; |
| memcpy(request, mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)); |
| if (mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || |
| mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) |
| ioc->ioc_link_reset_in_progress = 1; |
| init_completion(&ioc->base_cmds.done); |
| ioc->put_smid_default(ioc, smid); |
| wait_for_completion_timeout(&ioc->base_cmds.done, |
| msecs_to_jiffies(10000)); |
| if ((mpi_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET || |
| mpi_request->Operation == MPI2_SAS_OP_PHY_LINK_RESET) && |
| ioc->ioc_link_reset_in_progress) |
| ioc->ioc_link_reset_in_progress = 0; |
| if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { |
| mpt3sas_check_cmd_timeout(ioc, ioc->base_cmds.status, |
| mpi_request, sizeof(Mpi2SasIoUnitControlRequest_t)/4, |
| issue_reset); |
| goto issue_host_reset; |
| } |
| if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) |
| memcpy(mpi_reply, ioc->base_cmds.reply, |
| sizeof(Mpi2SasIoUnitControlReply_t)); |
| else |
| memset(mpi_reply, 0, sizeof(Mpi2SasIoUnitControlReply_t)); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| goto out; |
| |
| issue_host_reset: |
| if (issue_reset) |
| mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| rc = -EFAULT; |
| out: |
| mutex_unlock(&ioc->base_cmds.mutex); |
| return rc; |
| } |
| |
| /** |
| * mpt3sas_base_scsi_enclosure_processor - sending request to sep device |
| * @ioc: per adapter object |
| * @mpi_reply: the reply payload from FW |
| * @mpi_request: the request payload sent to FW |
| * |
| * The SCSI Enclosure Processor request message causes the IOC to |
| * communicate with SES devices to control LED status signals. |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_scsi_enclosure_processor(struct MPT3SAS_ADAPTER *ioc, |
| Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request) |
| { |
| u16 smid; |
| u8 issue_reset = 0; |
| int rc; |
| void *request; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| mutex_lock(&ioc->base_cmds.mutex); |
| |
| if (ioc->base_cmds.status != MPT3_CMD_NOT_USED) { |
| ioc_err(ioc, "%s: base_cmd in use\n", __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| rc = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT); |
| if (rc) |
| goto out; |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); |
| if (!smid) { |
| ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); |
| rc = -EAGAIN; |
| goto out; |
| } |
| |
| rc = 0; |
| ioc->base_cmds.status = MPT3_CMD_PENDING; |
| request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->base_cmds.smid = smid; |
| memset(request, 0, ioc->request_sz); |
| memcpy(request, mpi_request, sizeof(Mpi2SepReply_t)); |
| init_completion(&ioc->base_cmds.done); |
| ioc->put_smid_default(ioc, smid); |
| wait_for_completion_timeout(&ioc->base_cmds.done, |
| msecs_to_jiffies(10000)); |
| if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { |
| mpt3sas_check_cmd_timeout(ioc, |
| ioc->base_cmds.status, mpi_request, |
| sizeof(Mpi2SepRequest_t)/4, issue_reset); |
| goto issue_host_reset; |
| } |
| if (ioc->base_cmds.status & MPT3_CMD_REPLY_VALID) |
| memcpy(mpi_reply, ioc->base_cmds.reply, |
| sizeof(Mpi2SepReply_t)); |
| else |
| memset(mpi_reply, 0, sizeof(Mpi2SepReply_t)); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| goto out; |
| |
| issue_host_reset: |
| if (issue_reset) |
| mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| rc = -EFAULT; |
| out: |
| mutex_unlock(&ioc->base_cmds.mutex); |
| return rc; |
| } |
| |
| /** |
| * _base_get_port_facts - obtain port facts reply and save in ioc |
| * @ioc: per adapter object |
| * @port: ? |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_get_port_facts(struct MPT3SAS_ADAPTER *ioc, int port) |
| { |
| Mpi2PortFactsRequest_t mpi_request; |
| Mpi2PortFactsReply_t mpi_reply; |
| struct mpt3sas_port_facts *pfacts; |
| int mpi_reply_sz, mpi_request_sz, r; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| mpi_reply_sz = sizeof(Mpi2PortFactsReply_t); |
| mpi_request_sz = sizeof(Mpi2PortFactsRequest_t); |
| memset(&mpi_request, 0, mpi_request_sz); |
| mpi_request.Function = MPI2_FUNCTION_PORT_FACTS; |
| mpi_request.PortNumber = port; |
| r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, |
| (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5); |
| |
| if (r != 0) { |
| ioc_err(ioc, "%s: handshake failed (r=%d)\n", __func__, r); |
| return r; |
| } |
| |
| pfacts = &ioc->pfacts[port]; |
| memset(pfacts, 0, sizeof(struct mpt3sas_port_facts)); |
| pfacts->PortNumber = mpi_reply.PortNumber; |
| pfacts->VP_ID = mpi_reply.VP_ID; |
| pfacts->VF_ID = mpi_reply.VF_ID; |
| pfacts->MaxPostedCmdBuffers = |
| le16_to_cpu(mpi_reply.MaxPostedCmdBuffers); |
| |
| return 0; |
| } |
| |
| /** |
| * _base_wait_for_iocstate - Wait until the card is in READY or OPERATIONAL |
| * @ioc: per adapter object |
| * @timeout: |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_wait_for_iocstate(struct MPT3SAS_ADAPTER *ioc, int timeout) |
| { |
| u32 ioc_state; |
| int rc; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| if (ioc->pci_error_recovery) { |
| dfailprintk(ioc, |
| ioc_info(ioc, "%s: host in pci error recovery\n", |
| __func__)); |
| return -EFAULT; |
| } |
| |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| dhsprintk(ioc, |
| ioc_info(ioc, "%s: ioc_state(0x%08x)\n", |
| __func__, ioc_state)); |
| |
| if (((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) || |
| (ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL) |
| return 0; |
| |
| if (ioc_state & MPI2_DOORBELL_USED) { |
| dhsprintk(ioc, ioc_info(ioc, "unexpected doorbell active!\n")); |
| goto issue_diag_reset; |
| } |
| |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { |
| mpt3sas_print_fault_code(ioc, ioc_state & |
| MPI2_DOORBELL_DATA_MASK); |
| goto issue_diag_reset; |
| } else if ((ioc_state & MPI2_IOC_STATE_MASK) == |
| MPI2_IOC_STATE_COREDUMP) { |
| ioc_info(ioc, |
| "%s: Skipping the diag reset here. (ioc_state=0x%x)\n", |
| __func__, ioc_state); |
| return -EFAULT; |
| } |
| |
| ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, timeout); |
| if (ioc_state) { |
| dfailprintk(ioc, |
| ioc_info(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n", |
| __func__, ioc_state)); |
| return -EFAULT; |
| } |
| |
| issue_diag_reset: |
| rc = _base_diag_reset(ioc); |
| return rc; |
| } |
| |
| /** |
| * _base_get_ioc_facts - obtain ioc facts reply and save in ioc |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_get_ioc_facts(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2IOCFactsRequest_t mpi_request; |
| Mpi2IOCFactsReply_t mpi_reply; |
| struct mpt3sas_facts *facts; |
| int mpi_reply_sz, mpi_request_sz, r; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| r = _base_wait_for_iocstate(ioc, 10); |
| if (r) { |
| dfailprintk(ioc, |
| ioc_info(ioc, "%s: failed getting to correct state\n", |
| __func__)); |
| return r; |
| } |
| mpi_reply_sz = sizeof(Mpi2IOCFactsReply_t); |
| mpi_request_sz = sizeof(Mpi2IOCFactsRequest_t); |
| memset(&mpi_request, 0, mpi_request_sz); |
| mpi_request.Function = MPI2_FUNCTION_IOC_FACTS; |
| r = _base_handshake_req_reply_wait(ioc, mpi_request_sz, |
| (u32 *)&mpi_request, mpi_reply_sz, (u16 *)&mpi_reply, 5); |
| |
| if (r != 0) { |
| ioc_err(ioc, "%s: handshake failed (r=%d)\n", __func__, r); |
| return r; |
| } |
| |
| facts = &ioc->facts; |
| memset(facts, 0, sizeof(struct mpt3sas_facts)); |
| facts->MsgVersion = le16_to_cpu(mpi_reply.MsgVersion); |
| facts->HeaderVersion = le16_to_cpu(mpi_reply.HeaderVersion); |
| facts->VP_ID = mpi_reply.VP_ID; |
| facts->VF_ID = mpi_reply.VF_ID; |
| facts->IOCExceptions = le16_to_cpu(mpi_reply.IOCExceptions); |
| facts->MaxChainDepth = mpi_reply.MaxChainDepth; |
| facts->WhoInit = mpi_reply.WhoInit; |
| facts->NumberOfPorts = mpi_reply.NumberOfPorts; |
| facts->MaxMSIxVectors = mpi_reply.MaxMSIxVectors; |
| if (ioc->msix_enable && (facts->MaxMSIxVectors <= |
| MAX_COMBINED_MSIX_VECTORS(ioc->is_gen35_ioc))) |
| ioc->combined_reply_queue = 0; |
| facts->RequestCredit = le16_to_cpu(mpi_reply.RequestCredit); |
| facts->MaxReplyDescriptorPostQueueDepth = |
| le16_to_cpu(mpi_reply.MaxReplyDescriptorPostQueueDepth); |
| facts->ProductID = le16_to_cpu(mpi_reply.ProductID); |
| facts->IOCCapabilities = le32_to_cpu(mpi_reply.IOCCapabilities); |
| if ((facts->IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID)) |
| ioc->ir_firmware = 1; |
| if ((facts->IOCCapabilities & |
| MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE) && (!reset_devices)) |
| ioc->rdpq_array_capable = 1; |
| if ((facts->IOCCapabilities & MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ) |
| && ioc->is_aero_ioc) |
| ioc->atomic_desc_capable = 1; |
| facts->FWVersion.Word = le32_to_cpu(mpi_reply.FWVersion.Word); |
| facts->IOCRequestFrameSize = |
| le16_to_cpu(mpi_reply.IOCRequestFrameSize); |
| if (ioc->hba_mpi_version_belonged != MPI2_VERSION) { |
| facts->IOCMaxChainSegmentSize = |
| le16_to_cpu(mpi_reply.IOCMaxChainSegmentSize); |
| } |
| facts->MaxInitiators = le16_to_cpu(mpi_reply.MaxInitiators); |
| facts->MaxTargets = le16_to_cpu(mpi_reply.MaxTargets); |
| ioc->shost->max_id = -1; |
| facts->MaxSasExpanders = le16_to_cpu(mpi_reply.MaxSasExpanders); |
| facts->MaxEnclosures = le16_to_cpu(mpi_reply.MaxEnclosures); |
| facts->ProtocolFlags = le16_to_cpu(mpi_reply.ProtocolFlags); |
| facts->HighPriorityCredit = |
| le16_to_cpu(mpi_reply.HighPriorityCredit); |
| facts->ReplyFrameSize = mpi_reply.ReplyFrameSize; |
| facts->MaxDevHandle = le16_to_cpu(mpi_reply.MaxDevHandle); |
| facts->CurrentHostPageSize = mpi_reply.CurrentHostPageSize; |
| |
| /* |
| * Get the Page Size from IOC Facts. If it's 0, default to 4k. |
| */ |
| ioc->page_size = 1 << facts->CurrentHostPageSize; |
| if (ioc->page_size == 1) { |
| ioc_info(ioc, "CurrentHostPageSize is 0: Setting default host page size to 4k\n"); |
| ioc->page_size = 1 << MPT3SAS_HOST_PAGE_SIZE_4K; |
| } |
| dinitprintk(ioc, |
| ioc_info(ioc, "CurrentHostPageSize(%d)\n", |
| facts->CurrentHostPageSize)); |
| |
| dinitprintk(ioc, |
| ioc_info(ioc, "hba queue depth(%d), max chains per io(%d)\n", |
| facts->RequestCredit, facts->MaxChainDepth)); |
| dinitprintk(ioc, |
| ioc_info(ioc, "request frame size(%d), reply frame size(%d)\n", |
| facts->IOCRequestFrameSize * 4, |
| facts->ReplyFrameSize * 4)); |
| return 0; |
| } |
| |
| /** |
| * _base_send_ioc_init - send ioc_init to firmware |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2IOCInitRequest_t mpi_request; |
| Mpi2IOCInitReply_t mpi_reply; |
| int i, r = 0; |
| ktime_t current_time; |
| u16 ioc_status; |
| u32 reply_post_free_array_sz = 0; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| memset(&mpi_request, 0, sizeof(Mpi2IOCInitRequest_t)); |
| mpi_request.Function = MPI2_FUNCTION_IOC_INIT; |
| mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER; |
| mpi_request.VF_ID = 0; /* TODO */ |
| mpi_request.VP_ID = 0; |
| mpi_request.MsgVersion = cpu_to_le16(ioc->hba_mpi_version_belonged); |
| mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); |
| mpi_request.HostPageSize = MPT3SAS_HOST_PAGE_SIZE_4K; |
| |
| if (_base_is_controller_msix_enabled(ioc)) |
| mpi_request.HostMSIxVectors = ioc->reply_queue_count; |
| mpi_request.SystemRequestFrameSize = cpu_to_le16(ioc->request_sz/4); |
| mpi_request.ReplyDescriptorPostQueueDepth = |
| cpu_to_le16(ioc->reply_post_queue_depth); |
| mpi_request.ReplyFreeQueueDepth = |
| cpu_to_le16(ioc->reply_free_queue_depth); |
| |
| mpi_request.SenseBufferAddressHigh = |
| cpu_to_le32((u64)ioc->sense_dma >> 32); |
| mpi_request.SystemReplyAddressHigh = |
| cpu_to_le32((u64)ioc->reply_dma >> 32); |
| mpi_request.SystemRequestFrameBaseAddress = |
| cpu_to_le64((u64)ioc->request_dma); |
| mpi_request.ReplyFreeQueueAddress = |
| cpu_to_le64((u64)ioc->reply_free_dma); |
| |
| if (ioc->rdpq_array_enable) { |
| reply_post_free_array_sz = ioc->reply_queue_count * |
| sizeof(Mpi2IOCInitRDPQArrayEntry); |
| memset(ioc->reply_post_free_array, 0, reply_post_free_array_sz); |
| for (i = 0; i < ioc->reply_queue_count; i++) |
| ioc->reply_post_free_array[i].RDPQBaseAddress = |
| cpu_to_le64( |
| (u64)ioc->reply_post[i].reply_post_free_dma); |
| mpi_request.MsgFlags = MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE; |
| mpi_request.ReplyDescriptorPostQueueAddress = |
| cpu_to_le64((u64)ioc->reply_post_free_array_dma); |
| } else { |
| mpi_request.ReplyDescriptorPostQueueAddress = |
| cpu_to_le64((u64)ioc->reply_post[0].reply_post_free_dma); |
| } |
| |
| /* |
| * Set the flag to enable CoreDump state feature in IOC firmware. |
| */ |
| mpi_request.ConfigurationFlags |= |
| cpu_to_le16(MPI26_IOCINIT_CFGFLAGS_COREDUMP_ENABLE); |
| |
| /* This time stamp specifies number of milliseconds |
| * since epoch ~ midnight January 1, 1970. |
| */ |
| current_time = ktime_get_real(); |
| mpi_request.TimeStamp = cpu_to_le64(ktime_to_ms(current_time)); |
| |
| if (ioc->logging_level & MPT_DEBUG_INIT) { |
| __le32 *mfp; |
| int i; |
| |
| mfp = (__le32 *)&mpi_request; |
| ioc_info(ioc, "\toffset:data\n"); |
| for (i = 0; i < sizeof(Mpi2IOCInitRequest_t)/4; i++) |
| ioc_info(ioc, "\t[0x%02x]:%08x\n", i*4, |
| le32_to_cpu(mfp[i])); |
| } |
| |
| r = _base_handshake_req_reply_wait(ioc, |
| sizeof(Mpi2IOCInitRequest_t), (u32 *)&mpi_request, |
| sizeof(Mpi2IOCInitReply_t), (u16 *)&mpi_reply, 30); |
| |
| if (r != 0) { |
| ioc_err(ioc, "%s: handshake failed (r=%d)\n", __func__, r); |
| return r; |
| } |
| |
| ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS || |
| mpi_reply.IOCLogInfo) { |
| ioc_err(ioc, "%s: failed\n", __func__); |
| r = -EIO; |
| } |
| |
| return r; |
| } |
| |
| /** |
| * mpt3sas_port_enable_done - command completion routine for port enable |
| * @ioc: per adapter object |
| * @smid: system request message index |
| * @msix_index: MSIX table index supplied by the OS |
| * @reply: reply message frame(lower 32bit addr) |
| * |
| * Return: 1 meaning mf should be freed from _base_interrupt |
| * 0 means the mf is freed from this function. |
| */ |
| u8 |
| mpt3sas_port_enable_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, |
| u32 reply) |
| { |
| MPI2DefaultReply_t *mpi_reply; |
| u16 ioc_status; |
| |
| if (ioc->port_enable_cmds.status == MPT3_CMD_NOT_USED) |
| return 1; |
| |
| mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply); |
| if (!mpi_reply) |
| return 1; |
| |
| if (mpi_reply->Function != MPI2_FUNCTION_PORT_ENABLE) |
| return 1; |
| |
| ioc->port_enable_cmds.status &= ~MPT3_CMD_PENDING; |
| ioc->port_enable_cmds.status |= MPT3_CMD_COMPLETE; |
| ioc->port_enable_cmds.status |= MPT3_CMD_REPLY_VALID; |
| memcpy(ioc->port_enable_cmds.reply, mpi_reply, mpi_reply->MsgLength*4); |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS) |
| ioc->port_enable_failed = 1; |
| |
| if (ioc->is_driver_loading) { |
| if (ioc_status == MPI2_IOCSTATUS_SUCCESS) { |
| mpt3sas_port_enable_complete(ioc); |
| return 1; |
| } else { |
| ioc->start_scan_failed = ioc_status; |
| ioc->start_scan = 0; |
| return 1; |
| } |
| } |
| complete(&ioc->port_enable_cmds.done); |
| return 1; |
| } |
| |
| /** |
| * _base_send_port_enable - send port_enable(discovery stuff) to firmware |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_send_port_enable(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2PortEnableRequest_t *mpi_request; |
| Mpi2PortEnableReply_t *mpi_reply; |
| int r = 0; |
| u16 smid; |
| u16 ioc_status; |
| |
| ioc_info(ioc, "sending port enable !!\n"); |
| |
| if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { |
| ioc_err(ioc, "%s: internal command already in use\n", __func__); |
| return -EAGAIN; |
| } |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx); |
| if (!smid) { |
| ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); |
| return -EAGAIN; |
| } |
| |
| ioc->port_enable_cmds.status = MPT3_CMD_PENDING; |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->port_enable_cmds.smid = smid; |
| memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); |
| mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; |
| |
| init_completion(&ioc->port_enable_cmds.done); |
| ioc->put_smid_default(ioc, smid); |
| wait_for_completion_timeout(&ioc->port_enable_cmds.done, 300*HZ); |
| if (!(ioc->port_enable_cmds.status & MPT3_CMD_COMPLETE)) { |
| ioc_err(ioc, "%s: timeout\n", __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2PortEnableRequest_t)/4); |
| if (ioc->port_enable_cmds.status & MPT3_CMD_RESET) |
| r = -EFAULT; |
| else |
| r = -ETIME; |
| goto out; |
| } |
| |
| mpi_reply = ioc->port_enable_cmds.reply; |
| ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK; |
| if (ioc_status != MPI2_IOCSTATUS_SUCCESS) { |
| ioc_err(ioc, "%s: failed with (ioc_status=0x%08x)\n", |
| __func__, ioc_status); |
| r = -EFAULT; |
| goto out; |
| } |
| |
| out: |
| ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; |
| ioc_info(ioc, "port enable: %s\n", r == 0 ? "SUCCESS" : "FAILED"); |
| return r; |
| } |
| |
| /** |
| * mpt3sas_port_enable - initiate firmware discovery (don't wait for reply) |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_port_enable(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2PortEnableRequest_t *mpi_request; |
| u16 smid; |
| |
| ioc_info(ioc, "sending port enable !!\n"); |
| |
| if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { |
| ioc_err(ioc, "%s: internal command already in use\n", __func__); |
| return -EAGAIN; |
| } |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->port_enable_cb_idx); |
| if (!smid) { |
| ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); |
| return -EAGAIN; |
| } |
| |
| ioc->port_enable_cmds.status = MPT3_CMD_PENDING; |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->port_enable_cmds.smid = smid; |
| memset(mpi_request, 0, sizeof(Mpi2PortEnableRequest_t)); |
| mpi_request->Function = MPI2_FUNCTION_PORT_ENABLE; |
| |
| ioc->put_smid_default(ioc, smid); |
| return 0; |
| } |
| |
| /** |
| * _base_determine_wait_on_discovery - desposition |
| * @ioc: per adapter object |
| * |
| * Decide whether to wait on discovery to complete. Used to either |
| * locate boot device, or report volumes ahead of physical devices. |
| * |
| * Return: 1 for wait, 0 for don't wait. |
| */ |
| static int |
| _base_determine_wait_on_discovery(struct MPT3SAS_ADAPTER *ioc) |
| { |
| /* We wait for discovery to complete if IR firmware is loaded. |
| * The sas topology events arrive before PD events, so we need time to |
| * turn on the bit in ioc->pd_handles to indicate PD |
| * Also, it maybe required to report Volumes ahead of physical |
| * devices when MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING is set. |
| */ |
| if (ioc->ir_firmware) |
| return 1; |
| |
| /* if no Bios, then we don't need to wait */ |
| if (!ioc->bios_pg3.BiosVersion) |
| return 0; |
| |
| /* Bios is present, then we drop down here. |
| * |
| * If there any entries in the Bios Page 2, then we wait |
| * for discovery to complete. |
| */ |
| |
| /* Current Boot Device */ |
| if ((ioc->bios_pg2.CurrentBootDeviceForm & |
| MPI2_BIOSPAGE2_FORM_MASK) == |
| MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && |
| /* Request Boot Device */ |
| (ioc->bios_pg2.ReqBootDeviceForm & |
| MPI2_BIOSPAGE2_FORM_MASK) == |
| MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED && |
| /* Alternate Request Boot Device */ |
| (ioc->bios_pg2.ReqAltBootDeviceForm & |
| MPI2_BIOSPAGE2_FORM_MASK) == |
| MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED) |
| return 0; |
| |
| return 1; |
| } |
| |
| /** |
| * _base_unmask_events - turn on notification for this event |
| * @ioc: per adapter object |
| * @event: firmware event |
| * |
| * The mask is stored in ioc->event_masks. |
| */ |
| static void |
| _base_unmask_events(struct MPT3SAS_ADAPTER *ioc, u16 event) |
| { |
| u32 desired_event; |
| |
| if (event >= 128) |
| return; |
| |
| desired_event = (1 << (event % 32)); |
| |
| if (event < 32) |
| ioc->event_masks[0] &= ~desired_event; |
| else if (event < 64) |
| ioc->event_masks[1] &= ~desired_event; |
| else if (event < 96) |
| ioc->event_masks[2] &= ~desired_event; |
| else if (event < 128) |
| ioc->event_masks[3] &= ~desired_event; |
| } |
| |
| /** |
| * _base_event_notification - send event notification |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_event_notification(struct MPT3SAS_ADAPTER *ioc) |
| { |
| Mpi2EventNotificationRequest_t *mpi_request; |
| u16 smid; |
| int r = 0; |
| int i; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| if (ioc->base_cmds.status & MPT3_CMD_PENDING) { |
| ioc_err(ioc, "%s: internal command already in use\n", __func__); |
| return -EAGAIN; |
| } |
| |
| smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); |
| if (!smid) { |
| ioc_err(ioc, "%s: failed obtaining a smid\n", __func__); |
| return -EAGAIN; |
| } |
| ioc->base_cmds.status = MPT3_CMD_PENDING; |
| mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); |
| ioc->base_cmds.smid = smid; |
| memset(mpi_request, 0, sizeof(Mpi2EventNotificationRequest_t)); |
| mpi_request->Function = MPI2_FUNCTION_EVENT_NOTIFICATION; |
| mpi_request->VF_ID = 0; /* TODO */ |
| mpi_request->VP_ID = 0; |
| for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) |
| mpi_request->EventMasks[i] = |
| cpu_to_le32(ioc->event_masks[i]); |
| init_completion(&ioc->base_cmds.done); |
| ioc->put_smid_default(ioc, smid); |
| wait_for_completion_timeout(&ioc->base_cmds.done, 30*HZ); |
| if (!(ioc->base_cmds.status & MPT3_CMD_COMPLETE)) { |
| ioc_err(ioc, "%s: timeout\n", __func__); |
| _debug_dump_mf(mpi_request, |
| sizeof(Mpi2EventNotificationRequest_t)/4); |
| if (ioc->base_cmds.status & MPT3_CMD_RESET) |
| r = -EFAULT; |
| else |
| r = -ETIME; |
| } else |
| dinitprintk(ioc, ioc_info(ioc, "%s: complete\n", __func__)); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| return r; |
| } |
| |
| /** |
| * mpt3sas_base_validate_event_type - validating event types |
| * @ioc: per adapter object |
| * @event_type: firmware event |
| * |
| * This will turn on firmware event notification when application |
| * ask for that event. We don't mask events that are already enabled. |
| */ |
| void |
| mpt3sas_base_validate_event_type(struct MPT3SAS_ADAPTER *ioc, u32 *event_type) |
| { |
| int i, j; |
| u32 event_mask, desired_event; |
| u8 send_update_to_fw; |
| |
| for (i = 0, send_update_to_fw = 0; i < |
| MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) { |
| event_mask = ~event_type[i]; |
| desired_event = 1; |
| for (j = 0; j < 32; j++) { |
| if (!(event_mask & desired_event) && |
| (ioc->event_masks[i] & desired_event)) { |
| ioc->event_masks[i] &= ~desired_event; |
| send_update_to_fw = 1; |
| } |
| desired_event = (desired_event << 1); |
| } |
| } |
| |
| if (!send_update_to_fw) |
| return; |
| |
| mutex_lock(&ioc->base_cmds.mutex); |
| _base_event_notification(ioc); |
| mutex_unlock(&ioc->base_cmds.mutex); |
| } |
| |
| /** |
| * _base_diag_reset - the "big hammer" start of day reset |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_diag_reset(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u32 host_diagnostic; |
| u32 ioc_state; |
| u32 count; |
| u32 hcb_size; |
| |
| ioc_info(ioc, "sending diag reset !!\n"); |
| |
| pci_cfg_access_lock(ioc->pdev); |
| |
| drsprintk(ioc, ioc_info(ioc, "clear interrupts\n")); |
| |
| count = 0; |
| do { |
| /* Write magic sequence to WriteSequence register |
| * Loop until in diagnostic mode |
| */ |
| drsprintk(ioc, ioc_info(ioc, "write magic sequence\n")); |
| writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_1ST_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_2ND_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_3RD_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_4TH_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_5TH_KEY_VALUE, &ioc->chip->WriteSequence); |
| writel(MPI2_WRSEQ_6TH_KEY_VALUE, &ioc->chip->WriteSequence); |
| |
| /* wait 100 msec */ |
| msleep(100); |
| |
| if (count++ > 20) { |
| ioc_info(ioc, |
| "Stop writing magic sequence after 20 retries\n"); |
| _base_dump_reg_set(ioc); |
| goto out; |
| } |
| |
| host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); |
| drsprintk(ioc, |
| ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n", |
| count, host_diagnostic)); |
| |
| } while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0); |
| |
| hcb_size = ioc->base_readl(&ioc->chip->HCBSize); |
| |
| drsprintk(ioc, ioc_info(ioc, "diag reset: issued\n")); |
| writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER, |
| &ioc->chip->HostDiagnostic); |
| |
| /*This delay allows the chip PCIe hardware time to finish reset tasks*/ |
| msleep(MPI2_HARD_RESET_PCIE_FIRST_READ_DELAY_MICRO_SEC/1000); |
| |
| /* Approximately 300 second max wait */ |
| for (count = 0; count < (300000000 / |
| MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) { |
| |
| host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic); |
| |
| if (host_diagnostic == 0xFFFFFFFF) { |
| ioc_info(ioc, |
| "Invalid host diagnostic register value\n"); |
| _base_dump_reg_set(ioc); |
| goto out; |
| } |
| if (!(host_diagnostic & MPI2_DIAG_RESET_ADAPTER)) |
| break; |
| |
| msleep(MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC / 1000); |
| } |
| |
| if (host_diagnostic & MPI2_DIAG_HCB_MODE) { |
| |
| drsprintk(ioc, |
| ioc_info(ioc, "restart the adapter assuming the HCB Address points to good F/W\n")); |
| host_diagnostic &= ~MPI2_DIAG_BOOT_DEVICE_SELECT_MASK; |
| host_diagnostic |= MPI2_DIAG_BOOT_DEVICE_SELECT_HCDW; |
| writel(host_diagnostic, &ioc->chip->HostDiagnostic); |
| |
| drsprintk(ioc, ioc_info(ioc, "re-enable the HCDW\n")); |
| writel(hcb_size | MPI2_HCB_SIZE_HCB_ENABLE, |
| &ioc->chip->HCBSize); |
| } |
| |
| drsprintk(ioc, ioc_info(ioc, "restart the adapter\n")); |
| writel(host_diagnostic & ~MPI2_DIAG_HOLD_IOC_RESET, |
| &ioc->chip->HostDiagnostic); |
| |
| drsprintk(ioc, |
| ioc_info(ioc, "disable writes to the diagnostic register\n")); |
| writel(MPI2_WRSEQ_FLUSH_KEY_VALUE, &ioc->chip->WriteSequence); |
| |
| drsprintk(ioc, ioc_info(ioc, "Wait for FW to go to the READY state\n")); |
| ioc_state = _base_wait_on_iocstate(ioc, MPI2_IOC_STATE_READY, 20); |
| if (ioc_state) { |
| ioc_err(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n", |
| __func__, ioc_state); |
| _base_dump_reg_set(ioc); |
| goto out; |
| } |
| |
| pci_cfg_access_unlock(ioc->pdev); |
| ioc_info(ioc, "diag reset: SUCCESS\n"); |
| return 0; |
| |
| out: |
| pci_cfg_access_unlock(ioc->pdev); |
| ioc_err(ioc, "diag reset: FAILED\n"); |
| return -EFAULT; |
| } |
| |
| /** |
| * _base_make_ioc_ready - put controller in READY state |
| * @ioc: per adapter object |
| * @type: FORCE_BIG_HAMMER or SOFT_RESET |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_make_ioc_ready(struct MPT3SAS_ADAPTER *ioc, enum reset_type type) |
| { |
| u32 ioc_state; |
| int rc; |
| int count; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| if (ioc->pci_error_recovery) |
| return 0; |
| |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| dhsprintk(ioc, |
| ioc_info(ioc, "%s: ioc_state(0x%08x)\n", |
| __func__, ioc_state)); |
| |
| /* if in RESET state, it should move to READY state shortly */ |
| count = 0; |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_RESET) { |
| while ((ioc_state & MPI2_IOC_STATE_MASK) != |
| MPI2_IOC_STATE_READY) { |
| if (count++ == 10) { |
| ioc_err(ioc, "%s: failed going to ready state (ioc_state=0x%x)\n", |
| __func__, ioc_state); |
| return -EFAULT; |
| } |
| ssleep(1); |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| } |
| } |
| |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_READY) |
| return 0; |
| |
| if (ioc_state & MPI2_DOORBELL_USED) { |
| ioc_info(ioc, "unexpected doorbell active!\n"); |
| goto issue_diag_reset; |
| } |
| |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) { |
| mpt3sas_print_fault_code(ioc, ioc_state & |
| MPI2_DOORBELL_DATA_MASK); |
| goto issue_diag_reset; |
| } |
| |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_COREDUMP) { |
| /* |
| * if host reset is invoked while watch dog thread is waiting |
| * for IOC state to be changed to Fault state then driver has |
| * to wait here for CoreDump state to clear otherwise reset |
| * will be issued to the FW and FW move the IOC state to |
| * reset state without copying the FW logs to coredump region. |
| */ |
| if (ioc->ioc_coredump_loop != MPT3SAS_COREDUMP_LOOP_DONE) { |
| mpt3sas_print_coredump_info(ioc, ioc_state & |
| MPI2_DOORBELL_DATA_MASK); |
| mpt3sas_base_wait_for_coredump_completion(ioc, |
| __func__); |
| } |
| goto issue_diag_reset; |
| } |
| |
| if (type == FORCE_BIG_HAMMER) |
| goto issue_diag_reset; |
| |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_OPERATIONAL) |
| if (!(_base_send_ioc_reset(ioc, |
| MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET, 15))) { |
| return 0; |
| } |
| |
| issue_diag_reset: |
| rc = _base_diag_reset(ioc); |
| return rc; |
| } |
| |
| /** |
| * _base_make_ioc_operational - put controller in OPERATIONAL state |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| static int |
| _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int r, i, index, rc; |
| unsigned long flags; |
| u32 reply_address; |
| u16 smid; |
| struct _tr_list *delayed_tr, *delayed_tr_next; |
| struct _sc_list *delayed_sc, *delayed_sc_next; |
| struct _event_ack_list *delayed_event_ack, *delayed_event_ack_next; |
| u8 hide_flag; |
| struct adapter_reply_queue *reply_q; |
| Mpi2ReplyDescriptorsUnion_t *reply_post_free_contig; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| /* clean the delayed target reset list */ |
| list_for_each_entry_safe(delayed_tr, delayed_tr_next, |
| &ioc->delayed_tr_list, list) { |
| list_del(&delayed_tr->list); |
| kfree(delayed_tr); |
| } |
| |
| |
| list_for_each_entry_safe(delayed_tr, delayed_tr_next, |
| &ioc->delayed_tr_volume_list, list) { |
| list_del(&delayed_tr->list); |
| kfree(delayed_tr); |
| } |
| |
| list_for_each_entry_safe(delayed_sc, delayed_sc_next, |
| &ioc->delayed_sc_list, list) { |
| list_del(&delayed_sc->list); |
| kfree(delayed_sc); |
| } |
| |
| list_for_each_entry_safe(delayed_event_ack, delayed_event_ack_next, |
| &ioc->delayed_event_ack_list, list) { |
| list_del(&delayed_event_ack->list); |
| kfree(delayed_event_ack); |
| } |
| |
| spin_lock_irqsave(&ioc->scsi_lookup_lock, flags); |
| |
| /* hi-priority queue */ |
| INIT_LIST_HEAD(&ioc->hpr_free_list); |
| smid = ioc->hi_priority_smid; |
| for (i = 0; i < ioc->hi_priority_depth; i++, smid++) { |
| ioc->hpr_lookup[i].cb_idx = 0xFF; |
| ioc->hpr_lookup[i].smid = smid; |
| list_add_tail(&ioc->hpr_lookup[i].tracker_list, |
| &ioc->hpr_free_list); |
| } |
| |
| /* internal queue */ |
| INIT_LIST_HEAD(&ioc->internal_free_list); |
| smid = ioc->internal_smid; |
| for (i = 0; i < ioc->internal_depth; i++, smid++) { |
| ioc->internal_lookup[i].cb_idx = 0xFF; |
| ioc->internal_lookup[i].smid = smid; |
| list_add_tail(&ioc->internal_lookup[i].tracker_list, |
| &ioc->internal_free_list); |
| } |
| |
| spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); |
| |
| /* initialize Reply Free Queue */ |
| for (i = 0, reply_address = (u32)ioc->reply_dma ; |
| i < ioc->reply_free_queue_depth ; i++, reply_address += |
| ioc->reply_sz) { |
| ioc->reply_free[i] = cpu_to_le32(reply_address); |
| if (ioc->is_mcpu_endpoint) |
| _base_clone_reply_to_sys_mem(ioc, |
| reply_address, i); |
| } |
| |
| /* initialize reply queues */ |
| if (ioc->is_driver_loading) |
| _base_assign_reply_queues(ioc); |
| |
| /* initialize Reply Post Free Queue */ |
| index = 0; |
| reply_post_free_contig = ioc->reply_post[0].reply_post_free; |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { |
| /* |
| * If RDPQ is enabled, switch to the next allocation. |
| * Otherwise advance within the contiguous region. |
| */ |
| if (ioc->rdpq_array_enable) { |
| reply_q->reply_post_free = |
| ioc->reply_post[index++].reply_post_free; |
| } else { |
| reply_q->reply_post_free = reply_post_free_contig; |
| reply_post_free_contig += ioc->reply_post_queue_depth; |
| } |
| |
| reply_q->reply_post_host_index = 0; |
| for (i = 0; i < ioc->reply_post_queue_depth; i++) |
| reply_q->reply_post_free[i].Words = |
| cpu_to_le64(ULLONG_MAX); |
| if (!_base_is_controller_msix_enabled(ioc)) |
| goto skip_init_reply_post_free_queue; |
| } |
| skip_init_reply_post_free_queue: |
| |
| r = _base_send_ioc_init(ioc); |
| if (r) { |
| /* |
| * No need to check IOC state for fault state & issue |
| * diag reset during host reset. This check is need |
| * only during driver load time. |
| */ |
| if (!ioc->is_driver_loading) |
| return r; |
| |
| rc = _base_check_for_fault_and_issue_reset(ioc); |
| if (rc || (_base_send_ioc_init(ioc))) |
| return r; |
| } |
| |
| /* initialize reply free host index */ |
| ioc->reply_free_host_index = ioc->reply_free_queue_depth - 1; |
| writel(ioc->reply_free_host_index, &ioc->chip->ReplyFreeHostIndex); |
| |
| /* initialize reply post host index */ |
| list_for_each_entry(reply_q, &ioc->reply_queue_list, list) { |
| if (ioc->combined_reply_queue) |
| writel((reply_q->msix_index & 7)<< |
| MPI2_RPHI_MSIX_INDEX_SHIFT, |
| ioc->replyPostRegisterIndex[reply_q->msix_index/8]); |
| else |
| writel(reply_q->msix_index << |
| MPI2_RPHI_MSIX_INDEX_SHIFT, |
| &ioc->chip->ReplyPostHostIndex); |
| |
| if (!_base_is_controller_msix_enabled(ioc)) |
| goto skip_init_reply_post_host_index; |
| } |
| |
| skip_init_reply_post_host_index: |
| |
| mpt3sas_base_unmask_interrupts(ioc); |
| |
| if (ioc->hba_mpi_version_belonged != MPI2_VERSION) { |
| r = _base_display_fwpkg_version(ioc); |
| if (r) |
| return r; |
| } |
| |
| _base_static_config_pages(ioc); |
| r = _base_event_notification(ioc); |
| if (r) |
| return r; |
| |
| if (ioc->is_driver_loading) { |
| |
| if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier |
| == 0x80) { |
| hide_flag = (u8) ( |
| le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) & |
| MFG_PAGE10_HIDE_SSDS_MASK); |
| if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK) |
| ioc->mfg_pg10_hide_flag = hide_flag; |
| } |
| |
| ioc->wait_for_discovery_to_complete = |
| _base_determine_wait_on_discovery(ioc); |
| |
| return r; /* scan_start and scan_finished support */ |
| } |
| |
| r = _base_send_port_enable(ioc); |
| if (r) |
| return r; |
| |
| return r; |
| } |
| |
| /** |
| * mpt3sas_base_free_resources - free resources controller resources |
| * @ioc: per adapter object |
| */ |
| void |
| mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc) |
| { |
| dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| /* synchronizing freeing resource with pci_access_mutex lock */ |
| mutex_lock(&ioc->pci_access_mutex); |
| if (ioc->chip_phys && ioc->chip) { |
| mpt3sas_base_mask_interrupts(ioc); |
| ioc->shost_recovery = 1; |
| _base_make_ioc_ready(ioc, SOFT_RESET); |
| ioc->shost_recovery = 0; |
| } |
| |
| mpt3sas_base_unmap_resources(ioc); |
| mutex_unlock(&ioc->pci_access_mutex); |
| return; |
| } |
| |
| /** |
| * mpt3sas_base_attach - attach controller instance |
| * @ioc: per adapter object |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) |
| { |
| int r, i, rc; |
| int cpu_id, last_cpu_id = 0; |
| |
| dinitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| /* setup cpu_msix_table */ |
| ioc->cpu_count = num_online_cpus(); |
| for_each_online_cpu(cpu_id) |
| last_cpu_id = cpu_id; |
| ioc->cpu_msix_table_sz = last_cpu_id + 1; |
| ioc->cpu_msix_table = kzalloc(ioc->cpu_msix_table_sz, GFP_KERNEL); |
| ioc->reply_queue_count = 1; |
| if (!ioc->cpu_msix_table) { |
| ioc_info(ioc, "Allocation for cpu_msix_table failed!!!\n"); |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| if (ioc->is_warpdrive) { |
| ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz, |
| sizeof(resource_size_t *), GFP_KERNEL); |
| if (!ioc->reply_post_host_index) { |
| ioc_info(ioc, "Allocation for reply_post_host_index failed!!!\n"); |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| } |
| |
| ioc->smp_affinity_enable = smp_affinity_enable; |
| |
| ioc->rdpq_array_enable_assigned = 0; |
| ioc->use_32bit_dma = false; |
| ioc->dma_mask = 64; |
| if (ioc->is_aero_ioc) |
| ioc->base_readl = &_base_readl_aero; |
| else |
| ioc->base_readl = &_base_readl; |
| r = mpt3sas_base_map_resources(ioc); |
| if (r) |
| goto out_free_resources; |
| |
| pci_set_drvdata(ioc->pdev, ioc->shost); |
| r = _base_get_ioc_facts(ioc); |
| if (r) { |
| rc = _base_check_for_fault_and_issue_reset(ioc); |
| if (rc || (_base_get_ioc_facts(ioc))) |
| goto out_free_resources; |
| } |
| |
| switch (ioc->hba_mpi_version_belonged) { |
| case MPI2_VERSION: |
| ioc->build_sg_scmd = &_base_build_sg_scmd; |
| ioc->build_sg = &_base_build_sg; |
| ioc->build_zero_len_sge = &_base_build_zero_len_sge; |
| ioc->get_msix_index_for_smlio = &_base_get_msix_index; |
| break; |
| case MPI25_VERSION: |
| case MPI26_VERSION: |
| /* |
| * In SAS3.0, |
| * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and |
| * Target Status - all require the IEEE formated scatter gather |
| * elements. |
| */ |
| ioc->build_sg_scmd = &_base_build_sg_scmd_ieee; |
| ioc->build_sg = &_base_build_sg_ieee; |
| ioc->build_nvme_prp = &_base_build_nvme_prp; |
| ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee; |
| ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t); |
| if (ioc->high_iops_queues) |
| ioc->get_msix_index_for_smlio = |
| &_base_get_high_iops_msix_index; |
| else |
| ioc->get_msix_index_for_smlio = &_base_get_msix_index; |
| break; |
| } |
| if (ioc->atomic_desc_capable) { |
| ioc->put_smid_default = &_base_put_smid_default_atomic; |
| ioc->put_smid_scsi_io = &_base_put_smid_scsi_io_atomic; |
| ioc->put_smid_fast_path = |
| &_base_put_smid_fast_path_atomic; |
| ioc->put_smid_hi_priority = |
| &_base_put_smid_hi_priority_atomic; |
| } else { |
| ioc->put_smid_default = &_base_put_smid_default; |
| ioc->put_smid_fast_path = &_base_put_smid_fast_path; |
| ioc->put_smid_hi_priority = &_base_put_smid_hi_priority; |
| if (ioc->is_mcpu_endpoint) |
| ioc->put_smid_scsi_io = |
| &_base_put_smid_mpi_ep_scsi_io; |
| else |
| ioc->put_smid_scsi_io = &_base_put_smid_scsi_io; |
| } |
| /* |
| * These function pointers for other requests that don't |
| * the require IEEE scatter gather elements. |
| * |
| * For example Configuration Pages and SAS IOUNIT Control don't. |
| */ |
| ioc->build_sg_mpi = &_base_build_sg; |
| ioc->build_zero_len_sge_mpi = &_base_build_zero_len_sge; |
| |
| r = _base_make_ioc_ready(ioc, SOFT_RESET); |
| if (r) |
| goto out_free_resources; |
| |
| ioc->pfacts = kcalloc(ioc->facts.NumberOfPorts, |
| sizeof(struct mpt3sas_port_facts), GFP_KERNEL); |
| if (!ioc->pfacts) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| for (i = 0 ; i < ioc->facts.NumberOfPorts; i++) { |
| r = _base_get_port_facts(ioc, i); |
| if (r) { |
| rc = _base_check_for_fault_and_issue_reset(ioc); |
| if (rc || (_base_get_port_facts(ioc, i))) |
| goto out_free_resources; |
| } |
| } |
| |
| r = _base_allocate_memory_pools(ioc); |
| if (r) |
| goto out_free_resources; |
| |
| if (irqpoll_weight > 0) |
| ioc->thresh_hold = irqpoll_weight; |
| else |
| ioc->thresh_hold = ioc->hba_queue_depth/4; |
| |
| _base_init_irqpolls(ioc); |
| init_waitqueue_head(&ioc->reset_wq); |
| |
| /* allocate memory pd handle bitmask list */ |
| ioc->pd_handles_sz = (ioc->facts.MaxDevHandle / 8); |
| if (ioc->facts.MaxDevHandle % 8) |
| ioc->pd_handles_sz++; |
| ioc->pd_handles = kzalloc(ioc->pd_handles_sz, |
| GFP_KERNEL); |
| if (!ioc->pd_handles) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| ioc->blocking_handles = kzalloc(ioc->pd_handles_sz, |
| GFP_KERNEL); |
| if (!ioc->blocking_handles) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| /* allocate memory for pending OS device add list */ |
| ioc->pend_os_device_add_sz = (ioc->facts.MaxDevHandle / 8); |
| if (ioc->facts.MaxDevHandle % 8) |
| ioc->pend_os_device_add_sz++; |
| ioc->pend_os_device_add = kzalloc(ioc->pend_os_device_add_sz, |
| GFP_KERNEL); |
| if (!ioc->pend_os_device_add) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| ioc->device_remove_in_progress_sz = ioc->pend_os_device_add_sz; |
| ioc->device_remove_in_progress = |
| kzalloc(ioc->device_remove_in_progress_sz, GFP_KERNEL); |
| if (!ioc->device_remove_in_progress) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| ioc->fwfault_debug = mpt3sas_fwfault_debug; |
| |
| /* base internal command bits */ |
| mutex_init(&ioc->base_cmds.mutex); |
| ioc->base_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->base_cmds.status = MPT3_CMD_NOT_USED; |
| |
| /* port_enable command bits */ |
| ioc->port_enable_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->port_enable_cmds.status = MPT3_CMD_NOT_USED; |
| |
| /* transport internal command bits */ |
| ioc->transport_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->transport_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->transport_cmds.mutex); |
| |
| /* scsih internal command bits */ |
| ioc->scsih_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->scsih_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->scsih_cmds.mutex); |
| |
| /* task management internal command bits */ |
| ioc->tm_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->tm_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->tm_cmds.mutex); |
| |
| /* config page internal command bits */ |
| ioc->config_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->config_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->config_cmds.mutex); |
| |
| /* ctl module internal command bits */ |
| ioc->ctl_cmds.reply = kzalloc(ioc->reply_sz, GFP_KERNEL); |
| ioc->ctl_cmds.sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL); |
| ioc->ctl_cmds.status = MPT3_CMD_NOT_USED; |
| mutex_init(&ioc->ctl_cmds.mutex); |
| |
| if (!ioc->base_cmds.reply || !ioc->port_enable_cmds.reply || |
| !ioc->transport_cmds.reply || !ioc->scsih_cmds.reply || |
| !ioc->tm_cmds.reply || !ioc->config_cmds.reply || |
| !ioc->ctl_cmds.reply || !ioc->ctl_cmds.sense) { |
| r = -ENOMEM; |
| goto out_free_resources; |
| } |
| |
| for (i = 0; i < MPI2_EVENT_NOTIFY_EVENTMASK_WORDS; i++) |
| ioc->event_masks[i] = -1; |
| |
| /* here we enable the events we care about */ |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_DISCOVERY); |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_BROADCAST_PRIMITIVE); |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST); |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE); |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE); |
| _base_unmask_events(ioc, MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST); |
| _base_unmask_events(ioc, MPI2_EVENT_IR_VOLUME); |
| _base_unmask_events(ioc, MPI2_EVENT_IR_PHYSICAL_DISK); |
| _base_unmask_events(ioc, MPI2_EVENT_IR_OPERATION_STATUS); |
| _base_unmask_events(ioc, MPI2_EVENT_LOG_ENTRY_ADDED); |
| _base_unmask_events(ioc, MPI2_EVENT_TEMP_THRESHOLD); |
| _base_unmask_events(ioc, MPI2_EVENT_ACTIVE_CABLE_EXCEPTION); |
| _base_unmask_events(ioc, MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR); |
| if (ioc->hba_mpi_version_belonged == MPI26_VERSION) { |
| if (ioc->is_gen35_ioc) { |
| _base_unmask_events(ioc, |
| MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE); |
| _base_unmask_events(ioc, MPI2_EVENT_PCIE_ENUMERATION); |
| _base_unmask_events(ioc, |
| MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST); |
| } |
| } |
| r = _base_make_ioc_operational(ioc); |
| if (r) |
| goto out_free_resources; |
| |
| /* |
| * Copy current copy of IOCFacts in prev_fw_facts |
| * and it will be used during online firmware upgrade. |
| */ |
| memcpy(&ioc->prev_fw_facts, &ioc->facts, |
| sizeof(struct mpt3sas_facts)); |
| |
| ioc->non_operational_loop = 0; |
| ioc->ioc_coredump_loop = 0; |
| ioc->got_task_abort_from_ioctl = 0; |
| return 0; |
| |
| out_free_resources: |
| |
| ioc->remove_host = 1; |
| |
| mpt3sas_base_free_resources(ioc); |
| _base_release_memory_pools(ioc); |
| pci_set_drvdata(ioc->pdev, NULL); |
| kfree(ioc->cpu_msix_table); |
| if (ioc->is_warpdrive) |
| kfree(ioc->reply_post_host_index); |
| kfree(ioc->pd_handles); |
| kfree(ioc->blocking_handles); |
| kfree(ioc->device_remove_in_progress); |
| kfree(ioc->pend_os_device_add); |
| kfree(ioc->tm_cmds.reply); |
| kfree(ioc->transport_cmds.reply); |
| kfree(ioc->scsih_cmds.reply); |
| kfree(ioc->config_cmds.reply); |
| kfree(ioc->base_cmds.reply); |
| kfree(ioc->port_enable_cmds.reply); |
| kfree(ioc->ctl_cmds.reply); |
| kfree(ioc->ctl_cmds.sense); |
| kfree(ioc->pfacts); |
| ioc->ctl_cmds.reply = NULL; |
| ioc->base_cmds.reply = NULL; |
| ioc->tm_cmds.reply = NULL; |
| ioc->scsih_cmds.reply = NULL; |
| ioc->transport_cmds.reply = NULL; |
| ioc->config_cmds.reply = NULL; |
| ioc->pfacts = NULL; |
| return r; |
| } |
| |
| |
| /** |
| * mpt3sas_base_detach - remove controller instance |
| * @ioc: per adapter object |
| */ |
| void |
| mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc) |
| { |
| dexitprintk(ioc, ioc_info(ioc, "%s\n", __func__)); |
| |
| mpt3sas_base_stop_watchdog(ioc); |
| mpt3sas_base_free_resources(ioc); |
| _base_release_memory_pools(ioc); |
| mpt3sas_free_enclosure_list(ioc); |
| pci_set_drvdata(ioc->pdev, NULL); |
| kfree(ioc->cpu_msix_table); |
| if (ioc->is_warpdrive) |
| kfree(ioc->reply_post_host_index); |
| kfree(ioc->pd_handles); |
| kfree(ioc->blocking_handles); |
| kfree(ioc->device_remove_in_progress); |
| kfree(ioc->pend_os_device_add); |
| kfree(ioc->pfacts); |
| kfree(ioc->ctl_cmds.reply); |
| kfree(ioc->ctl_cmds.sense); |
| kfree(ioc->base_cmds.reply); |
| kfree(ioc->port_enable_cmds.reply); |
| kfree(ioc->tm_cmds.reply); |
| kfree(ioc->transport_cmds.reply); |
| kfree(ioc->scsih_cmds.reply); |
| kfree(ioc->config_cmds.reply); |
| } |
| |
| /** |
| * _base_pre_reset_handler - pre reset handler |
| * @ioc: per adapter object |
| */ |
| static void _base_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc) |
| { |
| mpt3sas_scsih_pre_reset_handler(ioc); |
| mpt3sas_ctl_pre_reset_handler(ioc); |
| dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__)); |
| } |
| |
| /** |
| * _base_clear_outstanding_mpt_commands - clears outstanding mpt commands |
| * @ioc: per adapter object |
| */ |
| static void |
| _base_clear_outstanding_mpt_commands(struct MPT3SAS_ADAPTER *ioc) |
| { |
| dtmprintk(ioc, |
| ioc_info(ioc, "%s: clear outstanding mpt cmds\n", __func__)); |
| if (ioc->transport_cmds.status & MPT3_CMD_PENDING) { |
| ioc->transport_cmds.status |= MPT3_CMD_RESET; |
| mpt3sas_base_free_smid(ioc, ioc->transport_cmds.smid); |
| complete(&ioc->transport_cmds.done); |
| } |
| if (ioc->base_cmds.status & MPT3_CMD_PENDING) { |
| ioc->base_cmds.status |= MPT3_CMD_RESET; |
| mpt3sas_base_free_smid(ioc, ioc->base_cmds.smid); |
| complete(&ioc->base_cmds.done); |
| } |
| if (ioc->port_enable_cmds.status & MPT3_CMD_PENDING) { |
| ioc->port_enable_failed = 1; |
| ioc->port_enable_cmds.status |= MPT3_CMD_RESET; |
| mpt3sas_base_free_smid(ioc, ioc->port_enable_cmds.smid); |
| if (ioc->is_driver_loading) { |
| ioc->start_scan_failed = |
| MPI2_IOCSTATUS_INTERNAL_ERROR; |
| ioc->start_scan = 0; |
| ioc->port_enable_cmds.status = |
| MPT3_CMD_NOT_USED; |
| } else { |
| complete(&ioc->port_enable_cmds.done); |
| } |
| } |
| if (ioc->config_cmds.status & MPT3_CMD_PENDING) { |
| ioc->config_cmds.status |= MPT3_CMD_RESET; |
| mpt3sas_base_free_smid(ioc, ioc->config_cmds.smid); |
| ioc->config_cmds.smid = USHRT_MAX; |
| complete(&ioc->config_cmds.done); |
| } |
| } |
| |
| /** |
| * _base_clear_outstanding_commands - clear all outstanding commands |
| * @ioc: per adapter object |
| */ |
| static void _base_clear_outstanding_commands(struct MPT3SAS_ADAPTER *ioc) |
| { |
| mpt3sas_scsih_clear_outstanding_scsi_tm_commands(ioc); |
| mpt3sas_ctl_clear_outstanding_ioctls(ioc); |
| _base_clear_outstanding_mpt_commands(ioc); |
| } |
| |
| /** |
| * _base_reset_done_handler - reset done handler |
| * @ioc: per adapter object |
| */ |
| static void _base_reset_done_handler(struct MPT3SAS_ADAPTER *ioc) |
| { |
| mpt3sas_scsih_reset_done_handler(ioc); |
| mpt3sas_ctl_reset_done_handler(ioc); |
| dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__)); |
| } |
| |
| /** |
| * mpt3sas_wait_for_commands_to_complete - reset controller |
| * @ioc: Pointer to MPT_ADAPTER structure |
| * |
| * This function is waiting 10s for all pending commands to complete |
| * prior to putting controller in reset. |
| */ |
| void |
| mpt3sas_wait_for_commands_to_complete(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u32 ioc_state; |
| |
| ioc->pending_io_count = 0; |
| |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| if ((ioc_state & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) |
| return; |
| |
| /* pending command count */ |
| ioc->pending_io_count = scsi_host_busy(ioc->shost); |
| |
| if (!ioc->pending_io_count) |
| return; |
| |
| /* wait for pending commands to complete */ |
| wait_event_timeout(ioc->reset_wq, ioc->pending_io_count == 0, 10 * HZ); |
| } |
| |
| /** |
| * _base_check_ioc_facts_changes - Look for increase/decrease of IOCFacts |
| * attributes during online firmware upgrade and update the corresponding |
| * IOC variables accordingly. |
| * |
| * @ioc: Pointer to MPT_ADAPTER structure |
| */ |
| static int |
| _base_check_ioc_facts_changes(struct MPT3SAS_ADAPTER *ioc) |
| { |
| u16 pd_handles_sz; |
| void *pd_handles = NULL, *blocking_handles = NULL; |
| void *pend_os_device_add = NULL, *device_remove_in_progress = NULL; |
| struct mpt3sas_facts *old_facts = &ioc->prev_fw_facts; |
| |
| if (ioc->facts.MaxDevHandle > old_facts->MaxDevHandle) { |
| pd_handles_sz = (ioc->facts.MaxDevHandle / 8); |
| if (ioc->facts.MaxDevHandle % 8) |
| pd_handles_sz++; |
| |
| pd_handles = krealloc(ioc->pd_handles, pd_handles_sz, |
| GFP_KERNEL); |
| if (!pd_handles) { |
| ioc_info(ioc, |
| "Unable to allocate the memory for pd_handles of sz: %d\n", |
| pd_handles_sz); |
| return -ENOMEM; |
| } |
| memset(pd_handles + ioc->pd_handles_sz, 0, |
| (pd_handles_sz - ioc->pd_handles_sz)); |
| ioc->pd_handles = pd_handles; |
| |
| blocking_handles = krealloc(ioc->blocking_handles, |
| pd_handles_sz, GFP_KERNEL); |
| if (!blocking_handles) { |
| ioc_info(ioc, |
| "Unable to allocate the memory for " |
| "blocking_handles of sz: %d\n", |
| pd_handles_sz); |
| return -ENOMEM; |
| } |
| memset(blocking_handles + ioc->pd_handles_sz, 0, |
| (pd_handles_sz - ioc->pd_handles_sz)); |
| ioc->blocking_handles = blocking_handles; |
| ioc->pd_handles_sz = pd_handles_sz; |
| |
| pend_os_device_add = krealloc(ioc->pend_os_device_add, |
| pd_handles_sz, GFP_KERNEL); |
| if (!pend_os_device_add) { |
| ioc_info(ioc, |
| "Unable to allocate the memory for pend_os_device_add of sz: %d\n", |
| pd_handles_sz); |
| return -ENOMEM; |
| } |
| memset(pend_os_device_add + ioc->pend_os_device_add_sz, 0, |
| (pd_handles_sz - ioc->pend_os_device_add_sz)); |
| ioc->pend_os_device_add = pend_os_device_add; |
| ioc->pend_os_device_add_sz = pd_handles_sz; |
| |
| device_remove_in_progress = krealloc( |
| ioc->device_remove_in_progress, pd_handles_sz, GFP_KERNEL); |
| if (!device_remove_in_progress) { |
| ioc_info(ioc, |
| "Unable to allocate the memory for " |
| "device_remove_in_progress of sz: %d\n " |
| , pd_handles_sz); |
| return -ENOMEM; |
| } |
| memset(device_remove_in_progress + |
| ioc->device_remove_in_progress_sz, 0, |
| (pd_handles_sz - ioc->device_remove_in_progress_sz)); |
| ioc->device_remove_in_progress = device_remove_in_progress; |
| ioc->device_remove_in_progress_sz = pd_handles_sz; |
| } |
| |
| memcpy(&ioc->prev_fw_facts, &ioc->facts, sizeof(struct mpt3sas_facts)); |
| return 0; |
| } |
| |
| /** |
| * mpt3sas_base_hard_reset_handler - reset controller |
| * @ioc: Pointer to MPT_ADAPTER structure |
| * @type: FORCE_BIG_HAMMER or SOFT_RESET |
| * |
| * Return: 0 for success, non-zero for failure. |
| */ |
| int |
| mpt3sas_base_hard_reset_handler(struct MPT3SAS_ADAPTER *ioc, |
| enum reset_type type) |
| { |
| int r; |
| unsigned long flags; |
| u32 ioc_state; |
| u8 is_fault = 0, is_trigger = 0; |
| |
| dtmprintk(ioc, ioc_info(ioc, "%s: enter\n", __func__)); |
| |
| if (ioc->pci_error_recovery) { |
| ioc_err(ioc, "%s: pci error recovery reset\n", __func__); |
| r = 0; |
| goto out_unlocked; |
| } |
| |
| if (mpt3sas_fwfault_debug) |
| mpt3sas_halt_firmware(ioc); |
| |
| /* wait for an active reset in progress to complete */ |
| mutex_lock(&ioc->reset_in_progress_mutex); |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| ioc->shost_recovery = 1; |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| |
| if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_REGISTERED) && |
| (!(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] & |
| MPT3_DIAG_BUFFER_IS_RELEASED))) { |
| is_trigger = 1; |
| ioc_state = mpt3sas_base_get_iocstate(ioc, 0); |
| if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT || |
| (ioc_state & MPI2_IOC_STATE_MASK) == |
| MPI2_IOC_STATE_COREDUMP) |
| is_fault = 1; |
| } |
| _base_pre_reset_handler(ioc); |
| mpt3sas_wait_for_commands_to_complete(ioc); |
| mpt3sas_base_mask_interrupts(ioc); |
| r = _base_make_ioc_ready(ioc, type); |
| if (r) |
| goto out; |
| _base_clear_outstanding_commands(ioc); |
| |
| /* If this hard reset is called while port enable is active, then |
| * there is no reason to call make_ioc_operational |
| */ |
| if (ioc->is_driver_loading && ioc->port_enable_failed) { |
| ioc->remove_host = 1; |
| r = -EFAULT; |
| goto out; |
| } |
| r = _base_get_ioc_facts(ioc); |
| if (r) |
| goto out; |
| |
| r = _base_check_ioc_facts_changes(ioc); |
| if (r) { |
| ioc_info(ioc, |
| "Some of the parameters got changed in this new firmware" |
| " image and it requires system reboot\n"); |
| goto out; |
| } |
| if (ioc->rdpq_array_enable && !ioc->rdpq_array_capable) |
| panic("%s: Issue occurred with flashing controller firmware." |
| "Please reboot the system and ensure that the correct" |
| " firmware version is running\n", ioc->name); |
| |
| r = _base_make_ioc_operational(ioc); |
| if (!r) |
| _base_reset_done_handler(ioc); |
| |
| out: |
| ioc_info(ioc, "%s: %s\n", __func__, r == 0 ? "SUCCESS" : "FAILED"); |
| |
| spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); |
| ioc->shost_recovery = 0; |
| spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); |
| ioc->ioc_reset_count++; |
| mutex_unlock(&ioc->reset_in_progress_mutex); |
| |
| out_unlocked: |
| if ((r == 0) && is_trigger) { |
| if (is_fault) |
| mpt3sas_trigger_master(ioc, MASTER_TRIGGER_FW_FAULT); |
| else |
| mpt3sas_trigger_master(ioc, |
| MASTER_TRIGGER_ADAPTER_RESET); |
| } |
| dtmprintk(ioc, ioc_info(ioc, "%s: exit\n", __func__)); |
| return r; |
| } |