| /* |
| * Copyright (C) 2005, 2006 |
| * Avishay Traeger (avishay@gmail.com) |
| * Copyright (C) 2008, 2009 |
| * Boaz Harrosh <ooo@electrozaur.com> |
| * |
| * This file is part of exofs. |
| * |
| * exofs is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation. Since it is based on ext2, and the only |
| * valid version of GPL for the Linux kernel is version 2, the only valid |
| * version of GPL for exofs is version 2. |
| * |
| * exofs is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with exofs; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <asm/div64.h> |
| #include <linux/lcm.h> |
| |
| #include "ore_raid.h" |
| |
| MODULE_AUTHOR("Boaz Harrosh <ooo@electrozaur.com>"); |
| MODULE_DESCRIPTION("Objects Raid Engine ore.ko"); |
| MODULE_LICENSE("GPL"); |
| |
| /* ore_verify_layout does a couple of things: |
| * 1. Given a minimum number of needed parameters fixes up the rest of the |
| * members to be operatonals for the ore. The needed parameters are those |
| * that are defined by the pnfs-objects layout STD. |
| * 2. Check to see if the current ore code actually supports these parameters |
| * for example stripe_unit must be a multple of the system PAGE_SIZE, |
| * and etc... |
| * 3. Cache some havily used calculations that will be needed by users. |
| */ |
| |
| enum { BIO_MAX_PAGES_KMALLOC = |
| (PAGE_SIZE - sizeof(struct bio)) / sizeof(struct bio_vec),}; |
| |
| int ore_verify_layout(unsigned total_comps, struct ore_layout *layout) |
| { |
| u64 stripe_length; |
| |
| switch (layout->raid_algorithm) { |
| case PNFS_OSD_RAID_0: |
| layout->parity = 0; |
| break; |
| case PNFS_OSD_RAID_5: |
| layout->parity = 1; |
| break; |
| case PNFS_OSD_RAID_PQ: |
| layout->parity = 2; |
| break; |
| case PNFS_OSD_RAID_4: |
| default: |
| ORE_ERR("Only RAID_0/5/6 for now received-enum=%d\n", |
| layout->raid_algorithm); |
| return -EINVAL; |
| } |
| if (0 != (layout->stripe_unit & ~PAGE_MASK)) { |
| ORE_ERR("Stripe Unit(0x%llx)" |
| " must be Multples of PAGE_SIZE(0x%lx)\n", |
| _LLU(layout->stripe_unit), PAGE_SIZE); |
| return -EINVAL; |
| } |
| if (layout->group_width) { |
| if (!layout->group_depth) { |
| ORE_ERR("group_depth == 0 && group_width != 0\n"); |
| return -EINVAL; |
| } |
| if (total_comps < (layout->group_width * layout->mirrors_p1)) { |
| ORE_ERR("Data Map wrong, " |
| "numdevs=%d < group_width=%d * mirrors=%d\n", |
| total_comps, layout->group_width, |
| layout->mirrors_p1); |
| return -EINVAL; |
| } |
| layout->group_count = total_comps / layout->mirrors_p1 / |
| layout->group_width; |
| } else { |
| if (layout->group_depth) { |
| printk(KERN_NOTICE "Warning: group_depth ignored " |
| "group_width == 0 && group_depth == %lld\n", |
| _LLU(layout->group_depth)); |
| } |
| layout->group_width = total_comps / layout->mirrors_p1; |
| layout->group_depth = -1; |
| layout->group_count = 1; |
| } |
| |
| stripe_length = (u64)layout->group_width * layout->stripe_unit; |
| if (stripe_length >= (1ULL << 32)) { |
| ORE_ERR("Stripe_length(0x%llx) >= 32bit is not supported\n", |
| _LLU(stripe_length)); |
| return -EINVAL; |
| } |
| |
| layout->max_io_length = |
| (BIO_MAX_PAGES_KMALLOC * PAGE_SIZE - layout->stripe_unit) * |
| (layout->group_width - layout->parity); |
| if (layout->parity) { |
| unsigned stripe_length = |
| (layout->group_width - layout->parity) * |
| layout->stripe_unit; |
| |
| layout->max_io_length /= stripe_length; |
| layout->max_io_length *= stripe_length; |
| } |
| ORE_DBGMSG("max_io_length=0x%lx\n", layout->max_io_length); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ore_verify_layout); |
| |
| static u8 *_ios_cred(struct ore_io_state *ios, unsigned index) |
| { |
| return ios->oc->comps[index & ios->oc->single_comp].cred; |
| } |
| |
| static struct osd_obj_id *_ios_obj(struct ore_io_state *ios, unsigned index) |
| { |
| return &ios->oc->comps[index & ios->oc->single_comp].obj; |
| } |
| |
| static struct osd_dev *_ios_od(struct ore_io_state *ios, unsigned index) |
| { |
| ORE_DBGMSG2("oc->first_dev=%d oc->numdevs=%d i=%d oc->ods=%p\n", |
| ios->oc->first_dev, ios->oc->numdevs, index, |
| ios->oc->ods); |
| |
| return ore_comp_dev(ios->oc, index); |
| } |
| |
| int _ore_get_io_state(struct ore_layout *layout, |
| struct ore_components *oc, unsigned numdevs, |
| unsigned sgs_per_dev, unsigned num_par_pages, |
| struct ore_io_state **pios) |
| { |
| struct ore_io_state *ios; |
| size_t size_ios, size_extra, size_total; |
| void *ios_extra; |
| |
| /* |
| * The desired layout looks like this, with the extra_allocation |
| * items pointed at from fields within ios or per_dev: |
| |
| struct __alloc_all_io_state { |
| struct ore_io_state ios; |
| struct ore_per_dev_state per_dev[numdevs]; |
| union { |
| struct osd_sg_entry sglist[sgs_per_dev * numdevs]; |
| struct page *pages[num_par_pages]; |
| } extra_allocation; |
| } whole_allocation; |
| |
| */ |
| |
| /* This should never happen, so abort early if it ever does. */ |
| if (sgs_per_dev && num_par_pages) { |
| ORE_DBGMSG("Tried to use both pages and sglist\n"); |
| *pios = NULL; |
| return -EINVAL; |
| } |
| |
| if (numdevs > (INT_MAX - sizeof(*ios)) / |
| sizeof(struct ore_per_dev_state)) |
| return -ENOMEM; |
| size_ios = sizeof(*ios) + sizeof(struct ore_per_dev_state) * numdevs; |
| |
| if (sgs_per_dev * numdevs > INT_MAX / sizeof(struct osd_sg_entry)) |
| return -ENOMEM; |
| if (num_par_pages > INT_MAX / sizeof(struct page *)) |
| return -ENOMEM; |
| size_extra = max(sizeof(struct osd_sg_entry) * (sgs_per_dev * numdevs), |
| sizeof(struct page *) * num_par_pages); |
| |
| size_total = size_ios + size_extra; |
| |
| if (likely(size_total <= PAGE_SIZE)) { |
| ios = kzalloc(size_total, GFP_KERNEL); |
| if (unlikely(!ios)) { |
| ORE_DBGMSG("Failed kzalloc bytes=%zd\n", size_total); |
| *pios = NULL; |
| return -ENOMEM; |
| } |
| ios_extra = (char *)ios + size_ios; |
| } else { |
| ios = kzalloc(size_ios, GFP_KERNEL); |
| if (unlikely(!ios)) { |
| ORE_DBGMSG("Failed alloc first part bytes=%zd\n", |
| size_ios); |
| *pios = NULL; |
| return -ENOMEM; |
| } |
| ios_extra = kzalloc(size_extra, GFP_KERNEL); |
| if (unlikely(!ios_extra)) { |
| ORE_DBGMSG("Failed alloc second part bytes=%zd\n", |
| size_extra); |
| kfree(ios); |
| *pios = NULL; |
| return -ENOMEM; |
| } |
| |
| /* In this case the per_dev[0].sgilist holds the pointer to |
| * be freed |
| */ |
| ios->extra_part_alloc = true; |
| } |
| |
| if (num_par_pages) { |
| ios->parity_pages = ios_extra; |
| ios->max_par_pages = num_par_pages; |
| } |
| if (sgs_per_dev) { |
| struct osd_sg_entry *sgilist = ios_extra; |
| unsigned d; |
| |
| for (d = 0; d < numdevs; ++d) { |
| ios->per_dev[d].sglist = sgilist; |
| sgilist += sgs_per_dev; |
| } |
| ios->sgs_per_dev = sgs_per_dev; |
| } |
| |
| ios->layout = layout; |
| ios->oc = oc; |
| *pios = ios; |
| return 0; |
| } |
| |
| /* Allocate an io_state for only a single group of devices |
| * |
| * If a user needs to call ore_read/write() this version must be used becase it |
| * allocates extra stuff for striping and raid. |
| * The ore might decide to only IO less then @length bytes do to alignmets |
| * and constrains as follows: |
| * - The IO cannot cross group boundary. |
| * - In raid5/6 The end of the IO must align at end of a stripe eg. |
| * (@offset + @length) % strip_size == 0. Or the complete range is within a |
| * single stripe. |
| * - Memory condition only permitted a shorter IO. (A user can use @length=~0 |
| * And check the returned ios->length for max_io_size.) |
| * |
| * The caller must check returned ios->length (and/or ios->nr_pages) and |
| * re-issue these pages that fall outside of ios->length |
| */ |
| int ore_get_rw_state(struct ore_layout *layout, struct ore_components *oc, |
| bool is_reading, u64 offset, u64 length, |
| struct ore_io_state **pios) |
| { |
| struct ore_io_state *ios; |
| unsigned numdevs = layout->group_width * layout->mirrors_p1; |
| unsigned sgs_per_dev = 0, max_par_pages = 0; |
| int ret; |
| |
| if (layout->parity && length) { |
| unsigned data_devs = layout->group_width - layout->parity; |
| unsigned stripe_size = layout->stripe_unit * data_devs; |
| unsigned pages_in_unit = layout->stripe_unit / PAGE_SIZE; |
| u32 remainder; |
| u64 num_stripes; |
| u64 num_raid_units; |
| |
| num_stripes = div_u64_rem(length, stripe_size, &remainder); |
| if (remainder) |
| ++num_stripes; |
| |
| num_raid_units = num_stripes * layout->parity; |
| |
| if (is_reading) { |
| /* For reads add per_dev sglist array */ |
| /* TODO: Raid 6 we need twice more. Actually: |
| * num_stripes / LCMdP(W,P); |
| * if (W%P != 0) num_stripes *= parity; |
| */ |
| |
| /* first/last seg is split */ |
| num_raid_units += layout->group_width; |
| sgs_per_dev = div_u64(num_raid_units, data_devs) + 2; |
| } else { |
| /* For Writes add parity pages array. */ |
| max_par_pages = num_raid_units * pages_in_unit * |
| sizeof(struct page *); |
| } |
| } |
| |
| ret = _ore_get_io_state(layout, oc, numdevs, sgs_per_dev, max_par_pages, |
| pios); |
| if (unlikely(ret)) |
| return ret; |
| |
| ios = *pios; |
| ios->reading = is_reading; |
| ios->offset = offset; |
| |
| if (length) { |
| ore_calc_stripe_info(layout, offset, length, &ios->si); |
| ios->length = ios->si.length; |
| ios->nr_pages = ((ios->offset & (PAGE_SIZE - 1)) + |
| ios->length + PAGE_SIZE - 1) / PAGE_SIZE; |
| if (layout->parity) |
| _ore_post_alloc_raid_stuff(ios); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(ore_get_rw_state); |
| |
| /* Allocate an io_state for all the devices in the comps array |
| * |
| * This version of io_state allocation is used mostly by create/remove |
| * and trunc where we currently need all the devices. The only wastful |
| * bit is the read/write_attributes with no IO. Those sites should |
| * be converted to use ore_get_rw_state() with length=0 |
| */ |
| int ore_get_io_state(struct ore_layout *layout, struct ore_components *oc, |
| struct ore_io_state **pios) |
| { |
| return _ore_get_io_state(layout, oc, oc->numdevs, 0, 0, pios); |
| } |
| EXPORT_SYMBOL(ore_get_io_state); |
| |
| void ore_put_io_state(struct ore_io_state *ios) |
| { |
| if (ios) { |
| unsigned i; |
| |
| for (i = 0; i < ios->numdevs; i++) { |
| struct ore_per_dev_state *per_dev = &ios->per_dev[i]; |
| |
| if (per_dev->or) |
| osd_end_request(per_dev->or); |
| if (per_dev->bio) |
| bio_put(per_dev->bio); |
| } |
| |
| _ore_free_raid_stuff(ios); |
| kfree(ios); |
| } |
| } |
| EXPORT_SYMBOL(ore_put_io_state); |
| |
| static void _sync_done(struct ore_io_state *ios, void *p) |
| { |
| struct completion *waiting = p; |
| |
| complete(waiting); |
| } |
| |
| static void _last_io(struct kref *kref) |
| { |
| struct ore_io_state *ios = container_of( |
| kref, struct ore_io_state, kref); |
| |
| ios->done(ios, ios->private); |
| } |
| |
| static void _done_io(struct osd_request *or, void *p) |
| { |
| struct ore_io_state *ios = p; |
| |
| kref_put(&ios->kref, _last_io); |
| } |
| |
| int ore_io_execute(struct ore_io_state *ios) |
| { |
| DECLARE_COMPLETION_ONSTACK(wait); |
| bool sync = (ios->done == NULL); |
| int i, ret; |
| |
| if (sync) { |
| ios->done = _sync_done; |
| ios->private = &wait; |
| } |
| |
| for (i = 0; i < ios->numdevs; i++) { |
| struct osd_request *or = ios->per_dev[i].or; |
| if (unlikely(!or)) |
| continue; |
| |
| ret = osd_finalize_request(or, 0, _ios_cred(ios, i), NULL); |
| if (unlikely(ret)) { |
| ORE_DBGMSG("Failed to osd_finalize_request() => %d\n", |
| ret); |
| return ret; |
| } |
| } |
| |
| kref_init(&ios->kref); |
| |
| for (i = 0; i < ios->numdevs; i++) { |
| struct osd_request *or = ios->per_dev[i].or; |
| if (unlikely(!or)) |
| continue; |
| |
| kref_get(&ios->kref); |
| osd_execute_request_async(or, _done_io, ios); |
| } |
| |
| kref_put(&ios->kref, _last_io); |
| ret = 0; |
| |
| if (sync) { |
| wait_for_completion(&wait); |
| ret = ore_check_io(ios, NULL); |
| } |
| return ret; |
| } |
| |
| static void _clear_bio(struct bio *bio) |
| { |
| struct bio_vec *bv; |
| unsigned i; |
| |
| bio_for_each_segment_all(bv, bio, i) { |
| unsigned this_count = bv->bv_len; |
| |
| if (likely(PAGE_SIZE == this_count)) |
| clear_highpage(bv->bv_page); |
| else |
| zero_user(bv->bv_page, bv->bv_offset, this_count); |
| } |
| } |
| |
| int ore_check_io(struct ore_io_state *ios, ore_on_dev_error on_dev_error) |
| { |
| enum osd_err_priority acumulated_osd_err = 0; |
| int acumulated_lin_err = 0; |
| int i; |
| |
| for (i = 0; i < ios->numdevs; i++) { |
| struct osd_sense_info osi; |
| struct ore_per_dev_state *per_dev = &ios->per_dev[i]; |
| struct osd_request *or = per_dev->or; |
| int ret; |
| |
| if (unlikely(!or)) |
| continue; |
| |
| ret = osd_req_decode_sense(or, &osi); |
| if (likely(!ret)) |
| continue; |
| |
| if ((OSD_ERR_PRI_CLEAR_PAGES == osi.osd_err_pri) && |
| per_dev->bio) { |
| /* start read offset passed endof file. |
| * Note: if we do not have bio it means read-attributes |
| * In this case we should return error to caller. |
| */ |
| _clear_bio(per_dev->bio); |
| ORE_DBGMSG("start read offset passed end of file " |
| "offset=0x%llx, length=0x%llx\n", |
| _LLU(per_dev->offset), |
| _LLU(per_dev->length)); |
| |
| continue; /* we recovered */ |
| } |
| |
| if (on_dev_error) { |
| u64 residual = ios->reading ? |
| or->in.residual : or->out.residual; |
| u64 offset = (ios->offset + ios->length) - residual; |
| unsigned dev = per_dev->dev - ios->oc->first_dev; |
| struct ore_dev *od = ios->oc->ods[dev]; |
| |
| on_dev_error(ios, od, dev, osi.osd_err_pri, |
| offset, residual); |
| } |
| if (osi.osd_err_pri >= acumulated_osd_err) { |
| acumulated_osd_err = osi.osd_err_pri; |
| acumulated_lin_err = ret; |
| } |
| } |
| |
| return acumulated_lin_err; |
| } |
| EXPORT_SYMBOL(ore_check_io); |
| |
| /* |
| * L - logical offset into the file |
| * |
| * D - number of Data devices |
| * D = group_width - parity |
| * |
| * U - The number of bytes in a stripe within a group |
| * U = stripe_unit * D |
| * |
| * T - The number of bytes striped within a group of component objects |
| * (before advancing to the next group) |
| * T = U * group_depth |
| * |
| * S - The number of bytes striped across all component objects |
| * before the pattern repeats |
| * S = T * group_count |
| * |
| * M - The "major" (i.e., across all components) cycle number |
| * M = L / S |
| * |
| * G - Counts the groups from the beginning of the major cycle |
| * G = (L - (M * S)) / T [or (L % S) / T] |
| * |
| * H - The byte offset within the group |
| * H = (L - (M * S)) % T [or (L % S) % T] |
| * |
| * N - The "minor" (i.e., across the group) stripe number |
| * N = H / U |
| * |
| * C - The component index coresponding to L |
| * |
| * C = (H - (N * U)) / stripe_unit + G * D |
| * [or (L % U) / stripe_unit + G * D] |
| * |
| * O - The component offset coresponding to L |
| * O = L % stripe_unit + N * stripe_unit + M * group_depth * stripe_unit |
| * |
| * LCMdP – Parity cycle: Lowest Common Multiple of group_width, parity |
| * divide by parity |
| * LCMdP = lcm(group_width, parity) / parity |
| * |
| * R - The parity Rotation stripe |
| * (Note parity cycle always starts at a group's boundary) |
| * R = N % LCMdP |
| * |
| * I = the first parity device index |
| * I = (group_width + group_width - R*parity - parity) % group_width |
| * |
| * Craid - The component index Rotated |
| * Craid = (group_width + C - R*parity) % group_width |
| * (We add the group_width to avoid negative numbers modulo math) |
| */ |
| void ore_calc_stripe_info(struct ore_layout *layout, u64 file_offset, |
| u64 length, struct ore_striping_info *si) |
| { |
| u32 stripe_unit = layout->stripe_unit; |
| u32 group_width = layout->group_width; |
| u64 group_depth = layout->group_depth; |
| u32 parity = layout->parity; |
| |
| u32 D = group_width - parity; |
| u32 U = D * stripe_unit; |
| u64 T = U * group_depth; |
| u64 S = T * layout->group_count; |
| u64 M = div64_u64(file_offset, S); |
| |
| /* |
| G = (L - (M * S)) / T |
| H = (L - (M * S)) % T |
| */ |
| u64 LmodS = file_offset - M * S; |
| u32 G = div64_u64(LmodS, T); |
| u64 H = LmodS - G * T; |
| |
| u32 N = div_u64(H, U); |
| u32 Nlast; |
| |
| /* "H - (N * U)" is just "H % U" so it's bound to u32 */ |
| u32 C = (u32)(H - (N * U)) / stripe_unit + G * group_width; |
| u32 first_dev = C - C % group_width; |
| |
| div_u64_rem(file_offset, stripe_unit, &si->unit_off); |
| |
| si->obj_offset = si->unit_off + (N * stripe_unit) + |
| (M * group_depth * stripe_unit); |
| si->cur_comp = C - first_dev; |
| si->cur_pg = si->unit_off / PAGE_SIZE; |
| |
| if (parity) { |
| u32 LCMdP = lcm(group_width, parity) / parity; |
| /* R = N % LCMdP; */ |
| u32 RxP = (N % LCMdP) * parity; |
| |
| si->par_dev = (group_width + group_width - parity - RxP) % |
| group_width + first_dev; |
| si->dev = (group_width + group_width + C - RxP) % |
| group_width + first_dev; |
| si->bytes_in_stripe = U; |
| si->first_stripe_start = M * S + G * T + N * U; |
| } else { |
| /* Make the math correct see _prepare_one_group */ |
| si->par_dev = group_width; |
| si->dev = C; |
| } |
| |
| si->dev *= layout->mirrors_p1; |
| si->par_dev *= layout->mirrors_p1; |
| si->offset = file_offset; |
| si->length = T - H; |
| if (si->length > length) |
| si->length = length; |
| |
| Nlast = div_u64(H + si->length + U - 1, U); |
| si->maxdevUnits = Nlast - N; |
| |
| si->M = M; |
| } |
| EXPORT_SYMBOL(ore_calc_stripe_info); |
| |
| int _ore_add_stripe_unit(struct ore_io_state *ios, unsigned *cur_pg, |
| unsigned pgbase, struct page **pages, |
| struct ore_per_dev_state *per_dev, int cur_len) |
| { |
| unsigned pg = *cur_pg; |
| struct request_queue *q = |
| osd_request_queue(_ios_od(ios, per_dev->dev)); |
| unsigned len = cur_len; |
| int ret; |
| |
| if (per_dev->bio == NULL) { |
| unsigned bio_size; |
| |
| if (!ios->reading) { |
| bio_size = ios->si.maxdevUnits; |
| } else { |
| bio_size = (ios->si.maxdevUnits + 1) * |
| (ios->layout->group_width - ios->layout->parity) / |
| ios->layout->group_width; |
| } |
| bio_size *= (ios->layout->stripe_unit / PAGE_SIZE); |
| |
| per_dev->bio = bio_kmalloc(GFP_KERNEL, bio_size); |
| if (unlikely(!per_dev->bio)) { |
| ORE_DBGMSG("Failed to allocate BIO size=%u\n", |
| bio_size); |
| ret = -ENOMEM; |
| goto out; |
| } |
| } |
| |
| while (cur_len > 0) { |
| unsigned pglen = min_t(unsigned, PAGE_SIZE - pgbase, cur_len); |
| unsigned added_len; |
| |
| cur_len -= pglen; |
| |
| added_len = bio_add_pc_page(q, per_dev->bio, pages[pg], |
| pglen, pgbase); |
| if (unlikely(pglen != added_len)) { |
| /* If bi_vcnt == bi_max then this is a SW BUG */ |
| ORE_DBGMSG("Failed bio_add_pc_page bi_vcnt=0x%x " |
| "bi_max=0x%x BIO_MAX=0x%x cur_len=0x%x\n", |
| per_dev->bio->bi_vcnt, |
| per_dev->bio->bi_max_vecs, |
| BIO_MAX_PAGES_KMALLOC, cur_len); |
| ret = -ENOMEM; |
| goto out; |
| } |
| _add_stripe_page(ios->sp2d, &ios->si, pages[pg]); |
| |
| pgbase = 0; |
| ++pg; |
| } |
| BUG_ON(cur_len); |
| |
| per_dev->length += len; |
| *cur_pg = pg; |
| ret = 0; |
| out: /* we fail the complete unit on an error eg don't advance |
| * per_dev->length and cur_pg. This means that we might have a bigger |
| * bio than the CDB requested length (per_dev->length). That's fine |
| * only the oposite is fatal. |
| */ |
| return ret; |
| } |
| |
| static int _add_parity_units(struct ore_io_state *ios, |
| struct ore_striping_info *si, |
| unsigned dev, unsigned first_dev, |
| unsigned mirrors_p1, unsigned devs_in_group, |
| unsigned cur_len) |
| { |
| unsigned do_parity; |
| int ret = 0; |
| |
| for (do_parity = ios->layout->parity; do_parity; --do_parity) { |
| struct ore_per_dev_state *per_dev; |
| |
| per_dev = &ios->per_dev[dev - first_dev]; |
| if (!per_dev->length && !per_dev->offset) { |
| /* Only/always the parity unit of the first |
| * stripe will be empty. So this is a chance to |
| * initialize the per_dev info. |
| */ |
| per_dev->dev = dev; |
| per_dev->offset = si->obj_offset - si->unit_off; |
| } |
| |
| ret = _ore_add_parity_unit(ios, si, per_dev, cur_len, |
| do_parity == 1); |
| if (unlikely(ret)) |
| break; |
| |
| if (do_parity != 1) { |
| dev = ((dev + mirrors_p1) % devs_in_group) + first_dev; |
| si->cur_comp = (si->cur_comp + 1) % |
| ios->layout->group_width; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int _prepare_for_striping(struct ore_io_state *ios) |
| { |
| struct ore_striping_info *si = &ios->si; |
| unsigned stripe_unit = ios->layout->stripe_unit; |
| unsigned mirrors_p1 = ios->layout->mirrors_p1; |
| unsigned group_width = ios->layout->group_width; |
| unsigned devs_in_group = group_width * mirrors_p1; |
| unsigned dev = si->dev; |
| unsigned first_dev = dev - (dev % devs_in_group); |
| unsigned cur_pg = ios->pages_consumed; |
| u64 length = ios->length; |
| int ret = 0; |
| |
| if (!ios->pages) { |
| ios->numdevs = ios->layout->mirrors_p1; |
| return 0; |
| } |
| |
| BUG_ON(length > si->length); |
| |
| while (length) { |
| struct ore_per_dev_state *per_dev = |
| &ios->per_dev[dev - first_dev]; |
| unsigned cur_len, page_off = 0; |
| |
| if (!per_dev->length && !per_dev->offset) { |
| /* First time initialize the per_dev info. */ |
| per_dev->dev = dev; |
| if (dev == si->dev) { |
| WARN_ON(dev == si->par_dev); |
| per_dev->offset = si->obj_offset; |
| cur_len = stripe_unit - si->unit_off; |
| page_off = si->unit_off & ~PAGE_MASK; |
| BUG_ON(page_off && (page_off != ios->pgbase)); |
| } else { |
| per_dev->offset = si->obj_offset - si->unit_off; |
| cur_len = stripe_unit; |
| } |
| } else { |
| cur_len = stripe_unit; |
| } |
| if (cur_len >= length) |
| cur_len = length; |
| |
| ret = _ore_add_stripe_unit(ios, &cur_pg, page_off, ios->pages, |
| per_dev, cur_len); |
| if (unlikely(ret)) |
| goto out; |
| |
| length -= cur_len; |
| |
| dev = ((dev + mirrors_p1) % devs_in_group) + first_dev; |
| si->cur_comp = (si->cur_comp + 1) % group_width; |
| if (unlikely((dev == si->par_dev) || (!length && ios->sp2d))) { |
| if (!length && ios->sp2d) { |
| /* If we are writing and this is the very last |
| * stripe. then operate on parity dev. |
| */ |
| dev = si->par_dev; |
| /* If last stripe operate on parity comp */ |
| si->cur_comp = group_width - ios->layout->parity; |
| } |
| |
| /* In writes cur_len just means if it's the |
| * last one. See _ore_add_parity_unit. |
| */ |
| ret = _add_parity_units(ios, si, dev, first_dev, |
| mirrors_p1, devs_in_group, |
| ios->sp2d ? length : cur_len); |
| if (unlikely(ret)) |
| goto out; |
| |
| /* Rotate next par_dev backwards with wraping */ |
| si->par_dev = (devs_in_group + si->par_dev - |
| ios->layout->parity * mirrors_p1) % |
| devs_in_group + first_dev; |
| /* Next stripe, start fresh */ |
| si->cur_comp = 0; |
| si->cur_pg = 0; |
| si->obj_offset += cur_len; |
| si->unit_off = 0; |
| } |
| } |
| out: |
| ios->numdevs = devs_in_group; |
| ios->pages_consumed = cur_pg; |
| return ret; |
| } |
| |
| int ore_create(struct ore_io_state *ios) |
| { |
| int i, ret; |
| |
| for (i = 0; i < ios->oc->numdevs; i++) { |
| struct osd_request *or; |
| |
| or = osd_start_request(_ios_od(ios, i)); |
| if (unlikely(!or)) { |
| ORE_ERR("%s: osd_start_request failed\n", __func__); |
| ret = -ENOMEM; |
| goto out; |
| } |
| ios->per_dev[i].or = or; |
| ios->numdevs++; |
| |
| osd_req_create_object(or, _ios_obj(ios, i)); |
| } |
| ret = ore_io_execute(ios); |
| |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(ore_create); |
| |
| int ore_remove(struct ore_io_state *ios) |
| { |
| int i, ret; |
| |
| for (i = 0; i < ios->oc->numdevs; i++) { |
| struct osd_request *or; |
| |
| or = osd_start_request(_ios_od(ios, i)); |
| if (unlikely(!or)) { |
| ORE_ERR("%s: osd_start_request failed\n", __func__); |
| ret = -ENOMEM; |
| goto out; |
| } |
| ios->per_dev[i].or = or; |
| ios->numdevs++; |
| |
| osd_req_remove_object(or, _ios_obj(ios, i)); |
| } |
| ret = ore_io_execute(ios); |
| |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(ore_remove); |
| |
| static int _write_mirror(struct ore_io_state *ios, int cur_comp) |
| { |
| struct ore_per_dev_state *master_dev = &ios->per_dev[cur_comp]; |
| unsigned dev = ios->per_dev[cur_comp].dev; |
| unsigned last_comp = cur_comp + ios->layout->mirrors_p1; |
| int ret = 0; |
| |
| if (ios->pages && !master_dev->length) |
| return 0; /* Just an empty slot */ |
| |
| for (; cur_comp < last_comp; ++cur_comp, ++dev) { |
| struct ore_per_dev_state *per_dev = &ios->per_dev[cur_comp]; |
| struct osd_request *or; |
| |
| or = osd_start_request(_ios_od(ios, dev)); |
| if (unlikely(!or)) { |
| ORE_ERR("%s: osd_start_request failed\n", __func__); |
| ret = -ENOMEM; |
| goto out; |
| } |
| per_dev->or = or; |
| |
| if (ios->pages) { |
| struct bio *bio; |
| |
| if (per_dev != master_dev) { |
| bio = bio_clone_kmalloc(master_dev->bio, |
| GFP_KERNEL); |
| if (unlikely(!bio)) { |
| ORE_DBGMSG( |
| "Failed to allocate BIO size=%u\n", |
| master_dev->bio->bi_max_vecs); |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| bio->bi_disk = NULL; |
| bio->bi_next = NULL; |
| per_dev->offset = master_dev->offset; |
| per_dev->length = master_dev->length; |
| per_dev->bio = bio; |
| per_dev->dev = dev; |
| } else { |
| bio = master_dev->bio; |
| /* FIXME: bio_set_dir() */ |
| bio_set_op_attrs(bio, REQ_OP_WRITE, 0); |
| } |
| |
| osd_req_write(or, _ios_obj(ios, cur_comp), |
| per_dev->offset, bio, per_dev->length); |
| ORE_DBGMSG("write(0x%llx) offset=0x%llx " |
| "length=0x%llx dev=%d\n", |
| _LLU(_ios_obj(ios, cur_comp)->id), |
| _LLU(per_dev->offset), |
| _LLU(per_dev->length), dev); |
| } else if (ios->kern_buff) { |
| per_dev->offset = ios->si.obj_offset; |
| per_dev->dev = ios->si.dev + dev; |
| |
| /* no cross device without page array */ |
| BUG_ON((ios->layout->group_width > 1) && |
| (ios->si.unit_off + ios->length > |
| ios->layout->stripe_unit)); |
| |
| ret = osd_req_write_kern(or, _ios_obj(ios, cur_comp), |
| per_dev->offset, |
| ios->kern_buff, ios->length); |
| if (unlikely(ret)) |
| goto out; |
| ORE_DBGMSG2("write_kern(0x%llx) offset=0x%llx " |
| "length=0x%llx dev=%d\n", |
| _LLU(_ios_obj(ios, cur_comp)->id), |
| _LLU(per_dev->offset), |
| _LLU(ios->length), per_dev->dev); |
| } else { |
| osd_req_set_attributes(or, _ios_obj(ios, cur_comp)); |
| ORE_DBGMSG2("obj(0x%llx) set_attributes=%d dev=%d\n", |
| _LLU(_ios_obj(ios, cur_comp)->id), |
| ios->out_attr_len, dev); |
| } |
| |
| if (ios->out_attr) |
| osd_req_add_set_attr_list(or, ios->out_attr, |
| ios->out_attr_len); |
| |
| if (ios->in_attr) |
| osd_req_add_get_attr_list(or, ios->in_attr, |
| ios->in_attr_len); |
| } |
| |
| out: |
| return ret; |
| } |
| |
| int ore_write(struct ore_io_state *ios) |
| { |
| int i; |
| int ret; |
| |
| if (unlikely(ios->sp2d && !ios->r4w)) { |
| /* A library is attempting a RAID-write without providing |
| * a pages lock interface. |
| */ |
| WARN_ON_ONCE(1); |
| return -ENOTSUPP; |
| } |
| |
| ret = _prepare_for_striping(ios); |
| if (unlikely(ret)) |
| return ret; |
| |
| for (i = 0; i < ios->numdevs; i += ios->layout->mirrors_p1) { |
| ret = _write_mirror(ios, i); |
| if (unlikely(ret)) |
| return ret; |
| } |
| |
| ret = ore_io_execute(ios); |
| return ret; |
| } |
| EXPORT_SYMBOL(ore_write); |
| |
| int _ore_read_mirror(struct ore_io_state *ios, unsigned cur_comp) |
| { |
| struct osd_request *or; |
| struct ore_per_dev_state *per_dev = &ios->per_dev[cur_comp]; |
| struct osd_obj_id *obj = _ios_obj(ios, cur_comp); |
| unsigned first_dev = (unsigned)obj->id; |
| |
| if (ios->pages && !per_dev->length) |
| return 0; /* Just an empty slot */ |
| |
| first_dev = per_dev->dev + first_dev % ios->layout->mirrors_p1; |
| or = osd_start_request(_ios_od(ios, first_dev)); |
| if (unlikely(!or)) { |
| ORE_ERR("%s: osd_start_request failed\n", __func__); |
| return -ENOMEM; |
| } |
| per_dev->or = or; |
| |
| if (ios->pages) { |
| if (per_dev->cur_sg) { |
| /* finalize the last sg_entry */ |
| _ore_add_sg_seg(per_dev, 0, false); |
| if (unlikely(!per_dev->cur_sg)) |
| return 0; /* Skip parity only device */ |
| |
| osd_req_read_sg(or, obj, per_dev->bio, |
| per_dev->sglist, per_dev->cur_sg); |
| } else { |
| /* The no raid case */ |
| osd_req_read(or, obj, per_dev->offset, |
| per_dev->bio, per_dev->length); |
| } |
| |
| ORE_DBGMSG("read(0x%llx) offset=0x%llx length=0x%llx" |
| " dev=%d sg_len=%d\n", _LLU(obj->id), |
| _LLU(per_dev->offset), _LLU(per_dev->length), |
| first_dev, per_dev->cur_sg); |
| } else { |
| BUG_ON(ios->kern_buff); |
| |
| osd_req_get_attributes(or, obj); |
| ORE_DBGMSG2("obj(0x%llx) get_attributes=%d dev=%d\n", |
| _LLU(obj->id), |
| ios->in_attr_len, first_dev); |
| } |
| if (ios->out_attr) |
| osd_req_add_set_attr_list(or, ios->out_attr, ios->out_attr_len); |
| |
| if (ios->in_attr) |
| osd_req_add_get_attr_list(or, ios->in_attr, ios->in_attr_len); |
| |
| return 0; |
| } |
| |
| int ore_read(struct ore_io_state *ios) |
| { |
| int i; |
| int ret; |
| |
| ret = _prepare_for_striping(ios); |
| if (unlikely(ret)) |
| return ret; |
| |
| for (i = 0; i < ios->numdevs; i += ios->layout->mirrors_p1) { |
| ret = _ore_read_mirror(ios, i); |
| if (unlikely(ret)) |
| return ret; |
| } |
| |
| ret = ore_io_execute(ios); |
| return ret; |
| } |
| EXPORT_SYMBOL(ore_read); |
| |
| int extract_attr_from_ios(struct ore_io_state *ios, struct osd_attr *attr) |
| { |
| struct osd_attr cur_attr = {.attr_page = 0}; /* start with zeros */ |
| void *iter = NULL; |
| int nelem; |
| |
| do { |
| nelem = 1; |
| osd_req_decode_get_attr_list(ios->per_dev[0].or, |
| &cur_attr, &nelem, &iter); |
| if ((cur_attr.attr_page == attr->attr_page) && |
| (cur_attr.attr_id == attr->attr_id)) { |
| attr->len = cur_attr.len; |
| attr->val_ptr = cur_attr.val_ptr; |
| return 0; |
| } |
| } while (iter); |
| |
| return -EIO; |
| } |
| EXPORT_SYMBOL(extract_attr_from_ios); |
| |
| static int _truncate_mirrors(struct ore_io_state *ios, unsigned cur_comp, |
| struct osd_attr *attr) |
| { |
| int last_comp = cur_comp + ios->layout->mirrors_p1; |
| |
| for (; cur_comp < last_comp; ++cur_comp) { |
| struct ore_per_dev_state *per_dev = &ios->per_dev[cur_comp]; |
| struct osd_request *or; |
| |
| or = osd_start_request(_ios_od(ios, cur_comp)); |
| if (unlikely(!or)) { |
| ORE_ERR("%s: osd_start_request failed\n", __func__); |
| return -ENOMEM; |
| } |
| per_dev->or = or; |
| |
| osd_req_set_attributes(or, _ios_obj(ios, cur_comp)); |
| osd_req_add_set_attr_list(or, attr, 1); |
| } |
| |
| return 0; |
| } |
| |
| struct _trunc_info { |
| struct ore_striping_info si; |
| u64 prev_group_obj_off; |
| u64 next_group_obj_off; |
| |
| unsigned first_group_dev; |
| unsigned nex_group_dev; |
| }; |
| |
| static void _calc_trunk_info(struct ore_layout *layout, u64 file_offset, |
| struct _trunc_info *ti) |
| { |
| unsigned stripe_unit = layout->stripe_unit; |
| |
| ore_calc_stripe_info(layout, file_offset, 0, &ti->si); |
| |
| ti->prev_group_obj_off = ti->si.M * stripe_unit; |
| ti->next_group_obj_off = ti->si.M ? (ti->si.M - 1) * stripe_unit : 0; |
| |
| ti->first_group_dev = ti->si.dev - (ti->si.dev % layout->group_width); |
| ti->nex_group_dev = ti->first_group_dev + layout->group_width; |
| } |
| |
| int ore_truncate(struct ore_layout *layout, struct ore_components *oc, |
| u64 size) |
| { |
| struct ore_io_state *ios; |
| struct exofs_trunc_attr { |
| struct osd_attr attr; |
| __be64 newsize; |
| } *size_attrs; |
| struct _trunc_info ti; |
| int i, ret; |
| |
| ret = ore_get_io_state(layout, oc, &ios); |
| if (unlikely(ret)) |
| return ret; |
| |
| _calc_trunk_info(ios->layout, size, &ti); |
| |
| size_attrs = kcalloc(ios->oc->numdevs, sizeof(*size_attrs), |
| GFP_KERNEL); |
| if (unlikely(!size_attrs)) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ios->numdevs = ios->oc->numdevs; |
| |
| for (i = 0; i < ios->numdevs; ++i) { |
| struct exofs_trunc_attr *size_attr = &size_attrs[i]; |
| u64 obj_size; |
| |
| if (i < ti.first_group_dev) |
| obj_size = ti.prev_group_obj_off; |
| else if (i >= ti.nex_group_dev) |
| obj_size = ti.next_group_obj_off; |
| else if (i < ti.si.dev) /* dev within this group */ |
| obj_size = ti.si.obj_offset + |
| ios->layout->stripe_unit - ti.si.unit_off; |
| else if (i == ti.si.dev) |
| obj_size = ti.si.obj_offset; |
| else /* i > ti.dev */ |
| obj_size = ti.si.obj_offset - ti.si.unit_off; |
| |
| size_attr->newsize = cpu_to_be64(obj_size); |
| size_attr->attr = g_attr_logical_length; |
| size_attr->attr.val_ptr = &size_attr->newsize; |
| |
| ORE_DBGMSG2("trunc(0x%llx) obj_offset=0x%llx dev=%d\n", |
| _LLU(oc->comps->obj.id), _LLU(obj_size), i); |
| ret = _truncate_mirrors(ios, i * ios->layout->mirrors_p1, |
| &size_attr->attr); |
| if (unlikely(ret)) |
| goto out; |
| } |
| ret = ore_io_execute(ios); |
| |
| out: |
| kfree(size_attrs); |
| ore_put_io_state(ios); |
| return ret; |
| } |
| EXPORT_SYMBOL(ore_truncate); |
| |
| const struct osd_attr g_attr_logical_length = ATTR_DEF( |
| OSD_APAGE_OBJECT_INFORMATION, OSD_ATTR_OI_LOGICAL_LENGTH, 8); |
| EXPORT_SYMBOL(g_attr_logical_length); |