| /* |
| * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c |
| * |
| * Marvell Orion-1-90 AP GE Reference Design Setup |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| #include <linux/gpio.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/pci.h> |
| #include <linux/irq.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/mv643xx_eth.h> |
| #include <linux/spi/spi.h> |
| #include <linux/spi/flash.h> |
| #include <linux/ethtool.h> |
| #include <net/dsa.h> |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/pci.h> |
| #include "common.h" |
| #include "orion5x.h" |
| |
| static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = { |
| .phy_addr = -1, |
| .speed = SPEED_1000, |
| .duplex = DUPLEX_FULL, |
| }; |
| |
| static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = { |
| .port_names[0] = "lan1", |
| .port_names[1] = "lan2", |
| .port_names[2] = "lan3", |
| .port_names[3] = "lan4", |
| .port_names[4] = "wan", |
| .port_names[5] = "cpu", |
| }; |
| |
| static struct mtd_partition rd88f6183ap_ge_partitions[] = { |
| { |
| .name = "kernel", |
| .offset = 0x00000000, |
| .size = 0x00200000, |
| }, { |
| .name = "rootfs", |
| .offset = 0x00200000, |
| .size = 0x00500000, |
| }, { |
| .name = "nvram", |
| .offset = 0x00700000, |
| .size = 0x00080000, |
| }, |
| }; |
| |
| static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = { |
| .type = "m25p64", |
| .nr_parts = ARRAY_SIZE(rd88f6183ap_ge_partitions), |
| .parts = rd88f6183ap_ge_partitions, |
| }; |
| |
| static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = { |
| { |
| .modalias = "m25p80", |
| .platform_data = &rd88f6183ap_ge_spi_slave_data, |
| .max_speed_hz = 20000000, |
| .bus_num = 0, |
| .chip_select = 0, |
| }, |
| }; |
| |
| static void __init rd88f6183ap_ge_init(void) |
| { |
| /* |
| * Setup basic Orion functions. Need to be called early. |
| */ |
| orion5x_init(); |
| |
| /* |
| * Configure peripherals. |
| */ |
| orion5x_ehci0_init(); |
| orion5x_eth_init(&rd88f6183ap_ge_eth_data); |
| orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data); |
| spi_register_board_info(rd88f6183ap_ge_spi_slave_info, |
| ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info)); |
| orion5x_spi_init(); |
| orion5x_uart0_init(); |
| } |
| |
| static struct hw_pci rd88f6183ap_ge_pci __initdata = { |
| .nr_controllers = 2, |
| .setup = orion5x_pci_sys_setup, |
| .scan = orion5x_pci_sys_scan_bus, |
| .map_irq = orion5x_pci_map_irq, |
| }; |
| |
| static int __init rd88f6183ap_ge_pci_init(void) |
| { |
| if (machine_is_rd88f6183ap_ge()) { |
| orion5x_pci_disable(); |
| pci_common_init(&rd88f6183ap_ge_pci); |
| } |
| |
| return 0; |
| } |
| subsys_initcall(rd88f6183ap_ge_pci_init); |
| |
| MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design") |
| /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */ |
| .atag_offset = 0x100, |
| .nr_irqs = ORION5X_NR_IRQS, |
| .init_machine = rd88f6183ap_ge_init, |
| .map_io = orion5x_map_io, |
| .init_early = orion5x_init_early, |
| .init_irq = orion5x_init_irq, |
| .init_time = orion5x_timer_init, |
| .fixup = tag_fixup_mem32, |
| .restart = orion5x_restart, |
| MACHINE_END |