| /* | 
 |  *  linux/drivers/block/loop.c | 
 |  * | 
 |  *  Written by Theodore Ts'o, 3/29/93 | 
 |  * | 
 |  * Copyright 1993 by Theodore Ts'o.  Redistribution of this file is | 
 |  * permitted under the GNU General Public License. | 
 |  * | 
 |  * DES encryption plus some minor changes by Werner Almesberger, 30-MAY-1993 | 
 |  * more DES encryption plus IDEA encryption by Nicholas J. Leon, June 20, 1996 | 
 |  * | 
 |  * Modularized and updated for 1.1.16 kernel - Mitch Dsouza 28th May 1994 | 
 |  * Adapted for 1.3.59 kernel - Andries Brouwer, 1 Feb 1996 | 
 |  * | 
 |  * Fixed do_loop_request() re-entrancy - Vincent.Renardias@waw.com Mar 20, 1997 | 
 |  * | 
 |  * Added devfs support - Richard Gooch <rgooch@atnf.csiro.au> 16-Jan-1998 | 
 |  * | 
 |  * Handle sparse backing files correctly - Kenn Humborg, Jun 28, 1998 | 
 |  * | 
 |  * Loadable modules and other fixes by AK, 1998 | 
 |  * | 
 |  * Make real block number available to downstream transfer functions, enables | 
 |  * CBC (and relatives) mode encryption requiring unique IVs per data block. | 
 |  * Reed H. Petty, rhp@draper.net | 
 |  * | 
 |  * Maximum number of loop devices now dynamic via max_loop module parameter. | 
 |  * Russell Kroll <rkroll@exploits.org> 19990701 | 
 |  * | 
 |  * Maximum number of loop devices when compiled-in now selectable by passing | 
 |  * max_loop=<1-255> to the kernel on boot. | 
 |  * Erik I. Bolsø, <eriki@himolde.no>, Oct 31, 1999 | 
 |  * | 
 |  * Completely rewrite request handling to be make_request_fn style and | 
 |  * non blocking, pushing work to a helper thread. Lots of fixes from | 
 |  * Al Viro too. | 
 |  * Jens Axboe <axboe@suse.de>, Nov 2000 | 
 |  * | 
 |  * Support up to 256 loop devices | 
 |  * Heinz Mauelshagen <mge@sistina.com>, Feb 2002 | 
 |  * | 
 |  * Support for falling back on the write file operation when the address space | 
 |  * operations write_begin is not available on the backing filesystem. | 
 |  * Anton Altaparmakov, 16 Feb 2005 | 
 |  * | 
 |  * Still To Fix: | 
 |  * - Advisory locking is ignored here. | 
 |  * - Should use an own CAP_* category instead of CAP_SYS_ADMIN | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 | #include <linux/moduleparam.h> | 
 | #include <linux/sched.h> | 
 | #include <linux/fs.h> | 
 | #include <linux/file.h> | 
 | #include <linux/stat.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/major.h> | 
 | #include <linux/wait.h> | 
 | #include <linux/blkdev.h> | 
 | #include <linux/blkpg.h> | 
 | #include <linux/init.h> | 
 | #include <linux/swap.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/compat.h> | 
 | #include <linux/suspend.h> | 
 | #include <linux/freezer.h> | 
 | #include <linux/mutex.h> | 
 | #include <linux/writeback.h> | 
 | #include <linux/completion.h> | 
 | #include <linux/highmem.h> | 
 | #include <linux/kthread.h> | 
 | #include <linux/splice.h> | 
 | #include <linux/sysfs.h> | 
 | #include <linux/miscdevice.h> | 
 | #include <linux/falloc.h> | 
 | #include "loop.h" | 
 |  | 
 | #include <asm/uaccess.h> | 
 |  | 
 | static DEFINE_IDR(loop_index_idr); | 
 | static DEFINE_MUTEX(loop_index_mutex); | 
 |  | 
 | static int max_part; | 
 | static int part_shift; | 
 |  | 
 | /* | 
 |  * Transfer functions | 
 |  */ | 
 | static int transfer_none(struct loop_device *lo, int cmd, | 
 | 			 struct page *raw_page, unsigned raw_off, | 
 | 			 struct page *loop_page, unsigned loop_off, | 
 | 			 int size, sector_t real_block) | 
 | { | 
 | 	char *raw_buf = kmap_atomic(raw_page) + raw_off; | 
 | 	char *loop_buf = kmap_atomic(loop_page) + loop_off; | 
 |  | 
 | 	if (cmd == READ) | 
 | 		memcpy(loop_buf, raw_buf, size); | 
 | 	else | 
 | 		memcpy(raw_buf, loop_buf, size); | 
 |  | 
 | 	kunmap_atomic(loop_buf); | 
 | 	kunmap_atomic(raw_buf); | 
 | 	cond_resched(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int transfer_xor(struct loop_device *lo, int cmd, | 
 | 			struct page *raw_page, unsigned raw_off, | 
 | 			struct page *loop_page, unsigned loop_off, | 
 | 			int size, sector_t real_block) | 
 | { | 
 | 	char *raw_buf = kmap_atomic(raw_page) + raw_off; | 
 | 	char *loop_buf = kmap_atomic(loop_page) + loop_off; | 
 | 	char *in, *out, *key; | 
 | 	int i, keysize; | 
 |  | 
 | 	if (cmd == READ) { | 
 | 		in = raw_buf; | 
 | 		out = loop_buf; | 
 | 	} else { | 
 | 		in = loop_buf; | 
 | 		out = raw_buf; | 
 | 	} | 
 |  | 
 | 	key = lo->lo_encrypt_key; | 
 | 	keysize = lo->lo_encrypt_key_size; | 
 | 	for (i = 0; i < size; i++) | 
 | 		*out++ = *in++ ^ key[(i & 511) % keysize]; | 
 |  | 
 | 	kunmap_atomic(loop_buf); | 
 | 	kunmap_atomic(raw_buf); | 
 | 	cond_resched(); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int xor_init(struct loop_device *lo, const struct loop_info64 *info) | 
 | { | 
 | 	if (unlikely(info->lo_encrypt_key_size <= 0)) | 
 | 		return -EINVAL; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static struct loop_func_table none_funcs = { | 
 | 	.number = LO_CRYPT_NONE, | 
 | 	.transfer = transfer_none, | 
 | }; 	 | 
 |  | 
 | static struct loop_func_table xor_funcs = { | 
 | 	.number = LO_CRYPT_XOR, | 
 | 	.transfer = transfer_xor, | 
 | 	.init = xor_init | 
 | }; 	 | 
 |  | 
 | /* xfer_funcs[0] is special - its release function is never called */ | 
 | static struct loop_func_table *xfer_funcs[MAX_LO_CRYPT] = { | 
 | 	&none_funcs, | 
 | 	&xor_funcs | 
 | }; | 
 |  | 
 | static loff_t get_size(loff_t offset, loff_t sizelimit, struct file *file) | 
 | { | 
 | 	loff_t loopsize; | 
 |  | 
 | 	/* Compute loopsize in bytes */ | 
 | 	loopsize = i_size_read(file->f_mapping->host); | 
 | 	if (offset > 0) | 
 | 		loopsize -= offset; | 
 | 	/* offset is beyond i_size, weird but possible */ | 
 | 	if (loopsize < 0) | 
 | 		return 0; | 
 |  | 
 | 	if (sizelimit > 0 && sizelimit < loopsize) | 
 | 		loopsize = sizelimit; | 
 | 	/* | 
 | 	 * Unfortunately, if we want to do I/O on the device, | 
 | 	 * the number of 512-byte sectors has to fit into a sector_t. | 
 | 	 */ | 
 | 	return loopsize >> 9; | 
 | } | 
 |  | 
 | static loff_t get_loop_size(struct loop_device *lo, struct file *file) | 
 | { | 
 | 	return get_size(lo->lo_offset, lo->lo_sizelimit, file); | 
 | } | 
 |  | 
 | static int | 
 | figure_loop_size(struct loop_device *lo, loff_t offset, loff_t sizelimit) | 
 | { | 
 | 	loff_t size = get_size(offset, sizelimit, lo->lo_backing_file); | 
 | 	sector_t x = (sector_t)size; | 
 | 	struct block_device *bdev = lo->lo_device; | 
 |  | 
 | 	if (unlikely((loff_t)x != size)) | 
 | 		return -EFBIG; | 
 | 	if (lo->lo_offset != offset) | 
 | 		lo->lo_offset = offset; | 
 | 	if (lo->lo_sizelimit != sizelimit) | 
 | 		lo->lo_sizelimit = sizelimit; | 
 | 	set_capacity(lo->lo_disk, x); | 
 | 	bd_set_size(bdev, (loff_t)get_capacity(bdev->bd_disk) << 9); | 
 | 	/* let user-space know about the new size */ | 
 | 	kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static inline int | 
 | lo_do_transfer(struct loop_device *lo, int cmd, | 
 | 	       struct page *rpage, unsigned roffs, | 
 | 	       struct page *lpage, unsigned loffs, | 
 | 	       int size, sector_t rblock) | 
 | { | 
 | 	if (unlikely(!lo->transfer)) | 
 | 		return 0; | 
 |  | 
 | 	return lo->transfer(lo, cmd, rpage, roffs, lpage, loffs, size, rblock); | 
 | } | 
 |  | 
 | /** | 
 |  * __do_lo_send_write - helper for writing data to a loop device | 
 |  * | 
 |  * This helper just factors out common code between do_lo_send_direct_write() | 
 |  * and do_lo_send_write(). | 
 |  */ | 
 | static int __do_lo_send_write(struct file *file, | 
 | 		u8 *buf, const int len, loff_t pos) | 
 | { | 
 | 	ssize_t bw; | 
 | 	mm_segment_t old_fs = get_fs(); | 
 |  | 
 | 	file_start_write(file); | 
 | 	set_fs(get_ds()); | 
 | 	bw = file->f_op->write(file, buf, len, &pos); | 
 | 	set_fs(old_fs); | 
 | 	file_end_write(file); | 
 | 	if (likely(bw == len)) | 
 | 		return 0; | 
 | 	printk_ratelimited(KERN_ERR "loop: Write error at byte offset %llu, length %i.\n", | 
 | 			(unsigned long long)pos, len); | 
 | 	if (bw >= 0) | 
 | 		bw = -EIO; | 
 | 	return bw; | 
 | } | 
 |  | 
 | /** | 
 |  * do_lo_send_direct_write - helper for writing data to a loop device | 
 |  * | 
 |  * This is the fast, non-transforming version that does not need double | 
 |  * buffering. | 
 |  */ | 
 | static int do_lo_send_direct_write(struct loop_device *lo, | 
 | 		struct bio_vec *bvec, loff_t pos, struct page *page) | 
 | { | 
 | 	ssize_t bw = __do_lo_send_write(lo->lo_backing_file, | 
 | 			kmap(bvec->bv_page) + bvec->bv_offset, | 
 | 			bvec->bv_len, pos); | 
 | 	kunmap(bvec->bv_page); | 
 | 	cond_resched(); | 
 | 	return bw; | 
 | } | 
 |  | 
 | /** | 
 |  * do_lo_send_write - helper for writing data to a loop device | 
 |  * | 
 |  * This is the slow, transforming version that needs to double buffer the | 
 |  * data as it cannot do the transformations in place without having direct | 
 |  * access to the destination pages of the backing file. | 
 |  */ | 
 | static int do_lo_send_write(struct loop_device *lo, struct bio_vec *bvec, | 
 | 		loff_t pos, struct page *page) | 
 | { | 
 | 	int ret = lo_do_transfer(lo, WRITE, page, 0, bvec->bv_page, | 
 | 			bvec->bv_offset, bvec->bv_len, pos >> 9); | 
 | 	if (likely(!ret)) | 
 | 		return __do_lo_send_write(lo->lo_backing_file, | 
 | 				page_address(page), bvec->bv_len, | 
 | 				pos); | 
 | 	printk_ratelimited(KERN_ERR "loop: Transfer error at byte offset %llu, " | 
 | 			"length %i.\n", (unsigned long long)pos, bvec->bv_len); | 
 | 	if (ret > 0) | 
 | 		ret = -EIO; | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int lo_send(struct loop_device *lo, struct bio *bio, loff_t pos) | 
 | { | 
 | 	int (*do_lo_send)(struct loop_device *, struct bio_vec *, loff_t, | 
 | 			struct page *page); | 
 | 	struct bio_vec bvec; | 
 | 	struct bvec_iter iter; | 
 | 	struct page *page = NULL; | 
 | 	int ret = 0; | 
 |  | 
 | 	if (lo->transfer != transfer_none) { | 
 | 		page = alloc_page(GFP_NOIO | __GFP_HIGHMEM); | 
 | 		if (unlikely(!page)) | 
 | 			goto fail; | 
 | 		kmap(page); | 
 | 		do_lo_send = do_lo_send_write; | 
 | 	} else { | 
 | 		do_lo_send = do_lo_send_direct_write; | 
 | 	} | 
 |  | 
 | 	bio_for_each_segment(bvec, bio, iter) { | 
 | 		ret = do_lo_send(lo, &bvec, pos, page); | 
 | 		if (ret < 0) | 
 | 			break; | 
 | 		pos += bvec.bv_len; | 
 | 	} | 
 | 	if (page) { | 
 | 		kunmap(page); | 
 | 		__free_page(page); | 
 | 	} | 
 | out: | 
 | 	return ret; | 
 | fail: | 
 | 	printk_ratelimited(KERN_ERR "loop: Failed to allocate temporary page for write.\n"); | 
 | 	ret = -ENOMEM; | 
 | 	goto out; | 
 | } | 
 |  | 
 | struct lo_read_data { | 
 | 	struct loop_device *lo; | 
 | 	struct page *page; | 
 | 	unsigned offset; | 
 | 	int bsize; | 
 | }; | 
 |  | 
 | static int | 
 | lo_splice_actor(struct pipe_inode_info *pipe, struct pipe_buffer *buf, | 
 | 		struct splice_desc *sd) | 
 | { | 
 | 	struct lo_read_data *p = sd->u.data; | 
 | 	struct loop_device *lo = p->lo; | 
 | 	struct page *page = buf->page; | 
 | 	sector_t IV; | 
 | 	int size; | 
 |  | 
 | 	IV = ((sector_t) page->index << (PAGE_CACHE_SHIFT - 9)) + | 
 | 							(buf->offset >> 9); | 
 | 	size = sd->len; | 
 | 	if (size > p->bsize) | 
 | 		size = p->bsize; | 
 |  | 
 | 	if (lo_do_transfer(lo, READ, page, buf->offset, p->page, p->offset, size, IV)) { | 
 | 		printk_ratelimited(KERN_ERR "loop: transfer error block %ld\n", | 
 | 		       page->index); | 
 | 		size = -EINVAL; | 
 | 	} | 
 |  | 
 | 	flush_dcache_page(p->page); | 
 |  | 
 | 	if (size > 0) | 
 | 		p->offset += size; | 
 |  | 
 | 	return size; | 
 | } | 
 |  | 
 | static int | 
 | lo_direct_splice_actor(struct pipe_inode_info *pipe, struct splice_desc *sd) | 
 | { | 
 | 	return __splice_from_pipe(pipe, sd, lo_splice_actor); | 
 | } | 
 |  | 
 | static ssize_t | 
 | do_lo_receive(struct loop_device *lo, | 
 | 	      struct bio_vec *bvec, int bsize, loff_t pos) | 
 | { | 
 | 	struct lo_read_data cookie; | 
 | 	struct splice_desc sd; | 
 | 	struct file *file; | 
 | 	ssize_t retval; | 
 |  | 
 | 	cookie.lo = lo; | 
 | 	cookie.page = bvec->bv_page; | 
 | 	cookie.offset = bvec->bv_offset; | 
 | 	cookie.bsize = bsize; | 
 |  | 
 | 	sd.len = 0; | 
 | 	sd.total_len = bvec->bv_len; | 
 | 	sd.flags = 0; | 
 | 	sd.pos = pos; | 
 | 	sd.u.data = &cookie; | 
 |  | 
 | 	file = lo->lo_backing_file; | 
 | 	retval = splice_direct_to_actor(file, &sd, lo_direct_splice_actor); | 
 |  | 
 | 	return retval; | 
 | } | 
 |  | 
 | static int | 
 | lo_receive(struct loop_device *lo, struct bio *bio, int bsize, loff_t pos) | 
 | { | 
 | 	struct bio_vec bvec; | 
 | 	struct bvec_iter iter; | 
 | 	ssize_t s; | 
 |  | 
 | 	bio_for_each_segment(bvec, bio, iter) { | 
 | 		s = do_lo_receive(lo, &bvec, bsize, pos); | 
 | 		if (s < 0) | 
 | 			return s; | 
 |  | 
 | 		if (s != bvec.bv_len) { | 
 | 			zero_fill_bio(bio); | 
 | 			break; | 
 | 		} | 
 | 		pos += bvec.bv_len; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) | 
 | { | 
 | 	loff_t pos; | 
 | 	int ret; | 
 |  | 
 | 	pos = ((loff_t) bio->bi_iter.bi_sector << 9) + lo->lo_offset; | 
 |  | 
 | 	if (bio_rw(bio) == WRITE) { | 
 | 		struct file *file = lo->lo_backing_file; | 
 |  | 
 | 		if (bio->bi_rw & REQ_FLUSH) { | 
 | 			ret = vfs_fsync(file, 0); | 
 | 			if (unlikely(ret && ret != -EINVAL)) { | 
 | 				ret = -EIO; | 
 | 				goto out; | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* | 
 | 		 * We use punch hole to reclaim the free space used by the | 
 | 		 * image a.k.a. discard. However we do not support discard if | 
 | 		 * encryption is enabled, because it may give an attacker | 
 | 		 * useful information. | 
 | 		 */ | 
 | 		if (bio->bi_rw & REQ_DISCARD) { | 
 | 			struct file *file = lo->lo_backing_file; | 
 | 			int mode = FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE; | 
 |  | 
 | 			if ((!file->f_op->fallocate) || | 
 | 			    lo->lo_encrypt_key_size) { | 
 | 				ret = -EOPNOTSUPP; | 
 | 				goto out; | 
 | 			} | 
 | 			ret = file->f_op->fallocate(file, mode, pos, | 
 | 						    bio->bi_iter.bi_size); | 
 | 			if (unlikely(ret && ret != -EINVAL && | 
 | 				     ret != -EOPNOTSUPP)) | 
 | 				ret = -EIO; | 
 | 			goto out; | 
 | 		} | 
 |  | 
 | 		ret = lo_send(lo, bio, pos); | 
 |  | 
 | 		if ((bio->bi_rw & REQ_FUA) && !ret) { | 
 | 			ret = vfs_fsync(file, 0); | 
 | 			if (unlikely(ret && ret != -EINVAL)) | 
 | 				ret = -EIO; | 
 | 		} | 
 | 	} else | 
 | 		ret = lo_receive(lo, bio, lo->lo_blocksize, pos); | 
 |  | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | /* | 
 |  * Add bio to back of pending list | 
 |  */ | 
 | static void loop_add_bio(struct loop_device *lo, struct bio *bio) | 
 | { | 
 | 	lo->lo_bio_count++; | 
 | 	bio_list_add(&lo->lo_bio_list, bio); | 
 | } | 
 |  | 
 | /* | 
 |  * Grab first pending buffer | 
 |  */ | 
 | static struct bio *loop_get_bio(struct loop_device *lo) | 
 | { | 
 | 	lo->lo_bio_count--; | 
 | 	return bio_list_pop(&lo->lo_bio_list); | 
 | } | 
 |  | 
 | static void loop_make_request(struct request_queue *q, struct bio *old_bio) | 
 | { | 
 | 	struct loop_device *lo = q->queuedata; | 
 | 	int rw = bio_rw(old_bio); | 
 |  | 
 | 	if (rw == READA) | 
 | 		rw = READ; | 
 |  | 
 | 	BUG_ON(!lo || (rw != READ && rw != WRITE)); | 
 |  | 
 | 	spin_lock_irq(&lo->lo_lock); | 
 | 	if (lo->lo_state != Lo_bound) | 
 | 		goto out; | 
 | 	if (unlikely(rw == WRITE && (lo->lo_flags & LO_FLAGS_READ_ONLY))) | 
 | 		goto out; | 
 | 	if (lo->lo_bio_count >= q->nr_congestion_on) | 
 | 		wait_event_lock_irq(lo->lo_req_wait, | 
 | 				    lo->lo_bio_count < q->nr_congestion_off, | 
 | 				    lo->lo_lock); | 
 | 	loop_add_bio(lo, old_bio); | 
 | 	wake_up(&lo->lo_event); | 
 | 	spin_unlock_irq(&lo->lo_lock); | 
 | 	return; | 
 |  | 
 | out: | 
 | 	spin_unlock_irq(&lo->lo_lock); | 
 | 	bio_io_error(old_bio); | 
 | } | 
 |  | 
 | struct switch_request { | 
 | 	struct file *file; | 
 | 	struct completion wait; | 
 | }; | 
 |  | 
 | static void do_loop_switch(struct loop_device *, struct switch_request *); | 
 |  | 
 | static inline void loop_handle_bio(struct loop_device *lo, struct bio *bio) | 
 | { | 
 | 	if (unlikely(!bio->bi_bdev)) { | 
 | 		do_loop_switch(lo, bio->bi_private); | 
 | 		bio_put(bio); | 
 | 	} else { | 
 | 		int ret = do_bio_filebacked(lo, bio); | 
 | 		bio_endio(bio, ret); | 
 | 	} | 
 | } | 
 |  | 
 | /* | 
 |  * worker thread that handles reads/writes to file backed loop devices, | 
 |  * to avoid blocking in our make_request_fn. it also does loop decrypting | 
 |  * on reads for block backed loop, as that is too heavy to do from | 
 |  * b_end_io context where irqs may be disabled. | 
 |  * | 
 |  * Loop explanation:  loop_clr_fd() sets lo_state to Lo_rundown before | 
 |  * calling kthread_stop().  Therefore once kthread_should_stop() is | 
 |  * true, make_request will not place any more requests.  Therefore | 
 |  * once kthread_should_stop() is true and lo_bio is NULL, we are | 
 |  * done with the loop. | 
 |  */ | 
 | static int loop_thread(void *data) | 
 | { | 
 | 	struct loop_device *lo = data; | 
 | 	struct bio *bio; | 
 |  | 
 | 	set_user_nice(current, MIN_NICE); | 
 |  | 
 | 	while (!kthread_should_stop() || !bio_list_empty(&lo->lo_bio_list)) { | 
 |  | 
 | 		wait_event_interruptible(lo->lo_event, | 
 | 				!bio_list_empty(&lo->lo_bio_list) || | 
 | 				kthread_should_stop()); | 
 |  | 
 | 		if (bio_list_empty(&lo->lo_bio_list)) | 
 | 			continue; | 
 | 		spin_lock_irq(&lo->lo_lock); | 
 | 		bio = loop_get_bio(lo); | 
 | 		if (lo->lo_bio_count < lo->lo_queue->nr_congestion_off) | 
 | 			wake_up(&lo->lo_req_wait); | 
 | 		spin_unlock_irq(&lo->lo_lock); | 
 |  | 
 | 		BUG_ON(!bio); | 
 | 		loop_handle_bio(lo, bio); | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * loop_switch performs the hard work of switching a backing store. | 
 |  * First it needs to flush existing IO, it does this by sending a magic | 
 |  * BIO down the pipe. The completion of this BIO does the actual switch. | 
 |  */ | 
 | static int loop_switch(struct loop_device *lo, struct file *file) | 
 | { | 
 | 	struct switch_request w; | 
 | 	struct bio *bio = bio_alloc(GFP_KERNEL, 0); | 
 | 	if (!bio) | 
 | 		return -ENOMEM; | 
 | 	init_completion(&w.wait); | 
 | 	w.file = file; | 
 | 	bio->bi_private = &w; | 
 | 	bio->bi_bdev = NULL; | 
 | 	loop_make_request(lo->lo_queue, bio); | 
 | 	wait_for_completion(&w.wait); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Helper to flush the IOs in loop, but keeping loop thread running | 
 |  */ | 
 | static int loop_flush(struct loop_device *lo) | 
 | { | 
 | 	/* loop not yet configured, no running thread, nothing to flush */ | 
 | 	if (!lo->lo_thread) | 
 | 		return 0; | 
 |  | 
 | 	return loop_switch(lo, NULL); | 
 | } | 
 |  | 
 | /* | 
 |  * Do the actual switch; called from the BIO completion routine | 
 |  */ | 
 | static void do_loop_switch(struct loop_device *lo, struct switch_request *p) | 
 | { | 
 | 	struct file *file = p->file; | 
 | 	struct file *old_file = lo->lo_backing_file; | 
 | 	struct address_space *mapping; | 
 |  | 
 | 	/* if no new file, only flush of queued bios requested */ | 
 | 	if (!file) | 
 | 		goto out; | 
 |  | 
 | 	mapping = file->f_mapping; | 
 | 	mapping_set_gfp_mask(old_file->f_mapping, lo->old_gfp_mask); | 
 | 	lo->lo_backing_file = file; | 
 | 	lo->lo_blocksize = S_ISBLK(mapping->host->i_mode) ? | 
 | 		mapping->host->i_bdev->bd_block_size : PAGE_SIZE; | 
 | 	lo->old_gfp_mask = mapping_gfp_mask(mapping); | 
 | 	mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS)); | 
 | out: | 
 | 	complete(&p->wait); | 
 | } | 
 |  | 
 |  | 
 | /* | 
 |  * loop_change_fd switched the backing store of a loopback device to | 
 |  * a new file. This is useful for operating system installers to free up | 
 |  * the original file and in High Availability environments to switch to | 
 |  * an alternative location for the content in case of server meltdown. | 
 |  * This can only work if the loop device is used read-only, and if the | 
 |  * new backing store is the same size and type as the old backing store. | 
 |  */ | 
 | static int loop_change_fd(struct loop_device *lo, struct block_device *bdev, | 
 | 			  unsigned int arg) | 
 | { | 
 | 	struct file	*file, *old_file; | 
 | 	struct inode	*inode; | 
 | 	int		error; | 
 |  | 
 | 	error = -ENXIO; | 
 | 	if (lo->lo_state != Lo_bound) | 
 | 		goto out; | 
 |  | 
 | 	/* the loop device has to be read-only */ | 
 | 	error = -EINVAL; | 
 | 	if (!(lo->lo_flags & LO_FLAGS_READ_ONLY)) | 
 | 		goto out; | 
 |  | 
 | 	error = -EBADF; | 
 | 	file = fget(arg); | 
 | 	if (!file) | 
 | 		goto out; | 
 |  | 
 | 	inode = file->f_mapping->host; | 
 | 	old_file = lo->lo_backing_file; | 
 |  | 
 | 	error = -EINVAL; | 
 |  | 
 | 	if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode)) | 
 | 		goto out_putf; | 
 |  | 
 | 	/* size of the new backing store needs to be the same */ | 
 | 	if (get_loop_size(lo, file) != get_loop_size(lo, old_file)) | 
 | 		goto out_putf; | 
 |  | 
 | 	/* and ... switch */ | 
 | 	error = loop_switch(lo, file); | 
 | 	if (error) | 
 | 		goto out_putf; | 
 |  | 
 | 	fput(old_file); | 
 | 	if (lo->lo_flags & LO_FLAGS_PARTSCAN) | 
 | 		ioctl_by_bdev(bdev, BLKRRPART, 0); | 
 | 	return 0; | 
 |  | 
 |  out_putf: | 
 | 	fput(file); | 
 |  out: | 
 | 	return error; | 
 | } | 
 |  | 
 | static inline int is_loop_device(struct file *file) | 
 | { | 
 | 	struct inode *i = file->f_mapping->host; | 
 |  | 
 | 	return i && S_ISBLK(i->i_mode) && MAJOR(i->i_rdev) == LOOP_MAJOR; | 
 | } | 
 |  | 
 | /* loop sysfs attributes */ | 
 |  | 
 | static ssize_t loop_attr_show(struct device *dev, char *page, | 
 | 			      ssize_t (*callback)(struct loop_device *, char *)) | 
 | { | 
 | 	struct gendisk *disk = dev_to_disk(dev); | 
 | 	struct loop_device *lo = disk->private_data; | 
 |  | 
 | 	return callback(lo, page); | 
 | } | 
 |  | 
 | #define LOOP_ATTR_RO(_name)						\ | 
 | static ssize_t loop_attr_##_name##_show(struct loop_device *, char *);	\ | 
 | static ssize_t loop_attr_do_show_##_name(struct device *d,		\ | 
 | 				struct device_attribute *attr, char *b)	\ | 
 | {									\ | 
 | 	return loop_attr_show(d, b, loop_attr_##_name##_show);		\ | 
 | }									\ | 
 | static struct device_attribute loop_attr_##_name =			\ | 
 | 	__ATTR(_name, S_IRUGO, loop_attr_do_show_##_name, NULL); | 
 |  | 
 | static ssize_t loop_attr_backing_file_show(struct loop_device *lo, char *buf) | 
 | { | 
 | 	ssize_t ret; | 
 | 	char *p = NULL; | 
 |  | 
 | 	spin_lock_irq(&lo->lo_lock); | 
 | 	if (lo->lo_backing_file) | 
 | 		p = d_path(&lo->lo_backing_file->f_path, buf, PAGE_SIZE - 1); | 
 | 	spin_unlock_irq(&lo->lo_lock); | 
 |  | 
 | 	if (IS_ERR_OR_NULL(p)) | 
 | 		ret = PTR_ERR(p); | 
 | 	else { | 
 | 		ret = strlen(p); | 
 | 		memmove(buf, p, ret); | 
 | 		buf[ret++] = '\n'; | 
 | 		buf[ret] = 0; | 
 | 	} | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static ssize_t loop_attr_offset_show(struct loop_device *lo, char *buf) | 
 | { | 
 | 	return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_offset); | 
 | } | 
 |  | 
 | static ssize_t loop_attr_sizelimit_show(struct loop_device *lo, char *buf) | 
 | { | 
 | 	return sprintf(buf, "%llu\n", (unsigned long long)lo->lo_sizelimit); | 
 | } | 
 |  | 
 | static ssize_t loop_attr_autoclear_show(struct loop_device *lo, char *buf) | 
 | { | 
 | 	int autoclear = (lo->lo_flags & LO_FLAGS_AUTOCLEAR); | 
 |  | 
 | 	return sprintf(buf, "%s\n", autoclear ? "1" : "0"); | 
 | } | 
 |  | 
 | static ssize_t loop_attr_partscan_show(struct loop_device *lo, char *buf) | 
 | { | 
 | 	int partscan = (lo->lo_flags & LO_FLAGS_PARTSCAN); | 
 |  | 
 | 	return sprintf(buf, "%s\n", partscan ? "1" : "0"); | 
 | } | 
 |  | 
 | LOOP_ATTR_RO(backing_file); | 
 | LOOP_ATTR_RO(offset); | 
 | LOOP_ATTR_RO(sizelimit); | 
 | LOOP_ATTR_RO(autoclear); | 
 | LOOP_ATTR_RO(partscan); | 
 |  | 
 | static struct attribute *loop_attrs[] = { | 
 | 	&loop_attr_backing_file.attr, | 
 | 	&loop_attr_offset.attr, | 
 | 	&loop_attr_sizelimit.attr, | 
 | 	&loop_attr_autoclear.attr, | 
 | 	&loop_attr_partscan.attr, | 
 | 	NULL, | 
 | }; | 
 |  | 
 | static struct attribute_group loop_attribute_group = { | 
 | 	.name = "loop", | 
 | 	.attrs= loop_attrs, | 
 | }; | 
 |  | 
 | static int loop_sysfs_init(struct loop_device *lo) | 
 | { | 
 | 	return sysfs_create_group(&disk_to_dev(lo->lo_disk)->kobj, | 
 | 				  &loop_attribute_group); | 
 | } | 
 |  | 
 | static void loop_sysfs_exit(struct loop_device *lo) | 
 | { | 
 | 	sysfs_remove_group(&disk_to_dev(lo->lo_disk)->kobj, | 
 | 			   &loop_attribute_group); | 
 | } | 
 |  | 
 | static void loop_config_discard(struct loop_device *lo) | 
 | { | 
 | 	struct file *file = lo->lo_backing_file; | 
 | 	struct inode *inode = file->f_mapping->host; | 
 | 	struct request_queue *q = lo->lo_queue; | 
 |  | 
 | 	/* | 
 | 	 * We use punch hole to reclaim the free space used by the | 
 | 	 * image a.k.a. discard. However we do not support discard if | 
 | 	 * encryption is enabled, because it may give an attacker | 
 | 	 * useful information. | 
 | 	 */ | 
 | 	if ((!file->f_op->fallocate) || | 
 | 	    lo->lo_encrypt_key_size) { | 
 | 		q->limits.discard_granularity = 0; | 
 | 		q->limits.discard_alignment = 0; | 
 | 		q->limits.max_discard_sectors = 0; | 
 | 		q->limits.discard_zeroes_data = 0; | 
 | 		queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q); | 
 | 		return; | 
 | 	} | 
 |  | 
 | 	q->limits.discard_granularity = inode->i_sb->s_blocksize; | 
 | 	q->limits.discard_alignment = 0; | 
 | 	q->limits.max_discard_sectors = UINT_MAX >> 9; | 
 | 	q->limits.discard_zeroes_data = 1; | 
 | 	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); | 
 | } | 
 |  | 
 | static int loop_set_fd(struct loop_device *lo, fmode_t mode, | 
 | 		       struct block_device *bdev, unsigned int arg) | 
 | { | 
 | 	struct file	*file, *f; | 
 | 	struct inode	*inode; | 
 | 	struct address_space *mapping; | 
 | 	unsigned lo_blocksize; | 
 | 	int		lo_flags = 0; | 
 | 	int		error; | 
 | 	loff_t		size; | 
 |  | 
 | 	/* This is safe, since we have a reference from open(). */ | 
 | 	__module_get(THIS_MODULE); | 
 |  | 
 | 	error = -EBADF; | 
 | 	file = fget(arg); | 
 | 	if (!file) | 
 | 		goto out; | 
 |  | 
 | 	error = -EBUSY; | 
 | 	if (lo->lo_state != Lo_unbound) | 
 | 		goto out_putf; | 
 |  | 
 | 	/* Avoid recursion */ | 
 | 	f = file; | 
 | 	while (is_loop_device(f)) { | 
 | 		struct loop_device *l; | 
 |  | 
 | 		if (f->f_mapping->host->i_bdev == bdev) | 
 | 			goto out_putf; | 
 |  | 
 | 		l = f->f_mapping->host->i_bdev->bd_disk->private_data; | 
 | 		if (l->lo_state == Lo_unbound) { | 
 | 			error = -EINVAL; | 
 | 			goto out_putf; | 
 | 		} | 
 | 		f = l->lo_backing_file; | 
 | 	} | 
 |  | 
 | 	mapping = file->f_mapping; | 
 | 	inode = mapping->host; | 
 |  | 
 | 	error = -EINVAL; | 
 | 	if (!S_ISREG(inode->i_mode) && !S_ISBLK(inode->i_mode)) | 
 | 		goto out_putf; | 
 |  | 
 | 	if (!(file->f_mode & FMODE_WRITE) || !(mode & FMODE_WRITE) || | 
 | 	    !file->f_op->write) | 
 | 		lo_flags |= LO_FLAGS_READ_ONLY; | 
 |  | 
 | 	lo_blocksize = S_ISBLK(inode->i_mode) ? | 
 | 		inode->i_bdev->bd_block_size : PAGE_SIZE; | 
 |  | 
 | 	error = -EFBIG; | 
 | 	size = get_loop_size(lo, file); | 
 | 	if ((loff_t)(sector_t)size != size) | 
 | 		goto out_putf; | 
 |  | 
 | 	error = 0; | 
 |  | 
 | 	set_device_ro(bdev, (lo_flags & LO_FLAGS_READ_ONLY) != 0); | 
 |  | 
 | 	lo->lo_blocksize = lo_blocksize; | 
 | 	lo->lo_device = bdev; | 
 | 	lo->lo_flags = lo_flags; | 
 | 	lo->lo_backing_file = file; | 
 | 	lo->transfer = transfer_none; | 
 | 	lo->ioctl = NULL; | 
 | 	lo->lo_sizelimit = 0; | 
 | 	lo->lo_bio_count = 0; | 
 | 	lo->old_gfp_mask = mapping_gfp_mask(mapping); | 
 | 	mapping_set_gfp_mask(mapping, lo->old_gfp_mask & ~(__GFP_IO|__GFP_FS)); | 
 |  | 
 | 	bio_list_init(&lo->lo_bio_list); | 
 |  | 
 | 	if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync) | 
 | 		blk_queue_flush(lo->lo_queue, REQ_FLUSH); | 
 |  | 
 | 	set_capacity(lo->lo_disk, size); | 
 | 	bd_set_size(bdev, size << 9); | 
 | 	loop_sysfs_init(lo); | 
 | 	/* let user-space know about the new size */ | 
 | 	kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE); | 
 |  | 
 | 	set_blocksize(bdev, lo_blocksize); | 
 |  | 
 | 	lo->lo_thread = kthread_create(loop_thread, lo, "loop%d", | 
 | 						lo->lo_number); | 
 | 	if (IS_ERR(lo->lo_thread)) { | 
 | 		error = PTR_ERR(lo->lo_thread); | 
 | 		goto out_clr; | 
 | 	} | 
 | 	lo->lo_state = Lo_bound; | 
 | 	wake_up_process(lo->lo_thread); | 
 | 	if (part_shift) | 
 | 		lo->lo_flags |= LO_FLAGS_PARTSCAN; | 
 | 	if (lo->lo_flags & LO_FLAGS_PARTSCAN) | 
 | 		ioctl_by_bdev(bdev, BLKRRPART, 0); | 
 |  | 
 | 	/* Grab the block_device to prevent its destruction after we | 
 | 	 * put /dev/loopXX inode. Later in loop_clr_fd() we bdput(bdev). | 
 | 	 */ | 
 | 	bdgrab(bdev); | 
 | 	return 0; | 
 |  | 
 | out_clr: | 
 | 	loop_sysfs_exit(lo); | 
 | 	lo->lo_thread = NULL; | 
 | 	lo->lo_device = NULL; | 
 | 	lo->lo_backing_file = NULL; | 
 | 	lo->lo_flags = 0; | 
 | 	set_capacity(lo->lo_disk, 0); | 
 | 	invalidate_bdev(bdev); | 
 | 	bd_set_size(bdev, 0); | 
 | 	kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE); | 
 | 	mapping_set_gfp_mask(mapping, lo->old_gfp_mask); | 
 | 	lo->lo_state = Lo_unbound; | 
 |  out_putf: | 
 | 	fput(file); | 
 |  out: | 
 | 	/* This is safe: open() is still holding a reference. */ | 
 | 	module_put(THIS_MODULE); | 
 | 	return error; | 
 | } | 
 |  | 
 | static int | 
 | loop_release_xfer(struct loop_device *lo) | 
 | { | 
 | 	int err = 0; | 
 | 	struct loop_func_table *xfer = lo->lo_encryption; | 
 |  | 
 | 	if (xfer) { | 
 | 		if (xfer->release) | 
 | 			err = xfer->release(lo); | 
 | 		lo->transfer = NULL; | 
 | 		lo->lo_encryption = NULL; | 
 | 		module_put(xfer->owner); | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | static int | 
 | loop_init_xfer(struct loop_device *lo, struct loop_func_table *xfer, | 
 | 	       const struct loop_info64 *i) | 
 | { | 
 | 	int err = 0; | 
 |  | 
 | 	if (xfer) { | 
 | 		struct module *owner = xfer->owner; | 
 |  | 
 | 		if (!try_module_get(owner)) | 
 | 			return -EINVAL; | 
 | 		if (xfer->init) | 
 | 			err = xfer->init(lo, i); | 
 | 		if (err) | 
 | 			module_put(owner); | 
 | 		else | 
 | 			lo->lo_encryption = xfer; | 
 | 	} | 
 | 	return err; | 
 | } | 
 |  | 
 | static int loop_clr_fd(struct loop_device *lo) | 
 | { | 
 | 	struct file *filp = lo->lo_backing_file; | 
 | 	gfp_t gfp = lo->old_gfp_mask; | 
 | 	struct block_device *bdev = lo->lo_device; | 
 |  | 
 | 	if (lo->lo_state != Lo_bound) | 
 | 		return -ENXIO; | 
 |  | 
 | 	/* | 
 | 	 * If we've explicitly asked to tear down the loop device, | 
 | 	 * and it has an elevated reference count, set it for auto-teardown when | 
 | 	 * the last reference goes away. This stops $!~#$@ udev from | 
 | 	 * preventing teardown because it decided that it needs to run blkid on | 
 | 	 * the loopback device whenever they appear. xfstests is notorious for | 
 | 	 * failing tests because blkid via udev races with a losetup | 
 | 	 * <dev>/do something like mkfs/losetup -d <dev> causing the losetup -d | 
 | 	 * command to fail with EBUSY. | 
 | 	 */ | 
 | 	if (lo->lo_refcnt > 1) { | 
 | 		lo->lo_flags |= LO_FLAGS_AUTOCLEAR; | 
 | 		mutex_unlock(&lo->lo_ctl_mutex); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	if (filp == NULL) | 
 | 		return -EINVAL; | 
 |  | 
 | 	spin_lock_irq(&lo->lo_lock); | 
 | 	lo->lo_state = Lo_rundown; | 
 | 	spin_unlock_irq(&lo->lo_lock); | 
 |  | 
 | 	kthread_stop(lo->lo_thread); | 
 |  | 
 | 	spin_lock_irq(&lo->lo_lock); | 
 | 	lo->lo_backing_file = NULL; | 
 | 	spin_unlock_irq(&lo->lo_lock); | 
 |  | 
 | 	loop_release_xfer(lo); | 
 | 	lo->transfer = NULL; | 
 | 	lo->ioctl = NULL; | 
 | 	lo->lo_device = NULL; | 
 | 	lo->lo_encryption = NULL; | 
 | 	lo->lo_offset = 0; | 
 | 	lo->lo_sizelimit = 0; | 
 | 	lo->lo_encrypt_key_size = 0; | 
 | 	lo->lo_thread = NULL; | 
 | 	memset(lo->lo_encrypt_key, 0, LO_KEY_SIZE); | 
 | 	memset(lo->lo_crypt_name, 0, LO_NAME_SIZE); | 
 | 	memset(lo->lo_file_name, 0, LO_NAME_SIZE); | 
 | 	if (bdev) { | 
 | 		bdput(bdev); | 
 | 		invalidate_bdev(bdev); | 
 | 	} | 
 | 	set_capacity(lo->lo_disk, 0); | 
 | 	loop_sysfs_exit(lo); | 
 | 	if (bdev) { | 
 | 		bd_set_size(bdev, 0); | 
 | 		/* let user-space know about this change */ | 
 | 		kobject_uevent(&disk_to_dev(bdev->bd_disk)->kobj, KOBJ_CHANGE); | 
 | 	} | 
 | 	mapping_set_gfp_mask(filp->f_mapping, gfp); | 
 | 	lo->lo_state = Lo_unbound; | 
 | 	/* This is safe: open() is still holding a reference. */ | 
 | 	module_put(THIS_MODULE); | 
 | 	if (lo->lo_flags & LO_FLAGS_PARTSCAN && bdev) | 
 | 		ioctl_by_bdev(bdev, BLKRRPART, 0); | 
 | 	lo->lo_flags = 0; | 
 | 	if (!part_shift) | 
 | 		lo->lo_disk->flags |= GENHD_FL_NO_PART_SCAN; | 
 | 	mutex_unlock(&lo->lo_ctl_mutex); | 
 | 	/* | 
 | 	 * Need not hold lo_ctl_mutex to fput backing file. | 
 | 	 * Calling fput holding lo_ctl_mutex triggers a circular | 
 | 	 * lock dependency possibility warning as fput can take | 
 | 	 * bd_mutex which is usually taken before lo_ctl_mutex. | 
 | 	 */ | 
 | 	fput(filp); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | loop_set_status(struct loop_device *lo, const struct loop_info64 *info) | 
 | { | 
 | 	int err; | 
 | 	struct loop_func_table *xfer; | 
 | 	kuid_t uid = current_uid(); | 
 |  | 
 | 	if (lo->lo_encrypt_key_size && | 
 | 	    !uid_eq(lo->lo_key_owner, uid) && | 
 | 	    !capable(CAP_SYS_ADMIN)) | 
 | 		return -EPERM; | 
 | 	if (lo->lo_state != Lo_bound) | 
 | 		return -ENXIO; | 
 | 	if ((unsigned int) info->lo_encrypt_key_size > LO_KEY_SIZE) | 
 | 		return -EINVAL; | 
 |  | 
 | 	err = loop_release_xfer(lo); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	if (info->lo_encrypt_type) { | 
 | 		unsigned int type = info->lo_encrypt_type; | 
 |  | 
 | 		if (type >= MAX_LO_CRYPT) | 
 | 			return -EINVAL; | 
 | 		xfer = xfer_funcs[type]; | 
 | 		if (xfer == NULL) | 
 | 			return -EINVAL; | 
 | 	} else | 
 | 		xfer = NULL; | 
 |  | 
 | 	err = loop_init_xfer(lo, xfer, info); | 
 | 	if (err) | 
 | 		return err; | 
 |  | 
 | 	if (lo->lo_offset != info->lo_offset || | 
 | 	    lo->lo_sizelimit != info->lo_sizelimit) | 
 | 		if (figure_loop_size(lo, info->lo_offset, info->lo_sizelimit)) | 
 | 			return -EFBIG; | 
 |  | 
 | 	loop_config_discard(lo); | 
 |  | 
 | 	memcpy(lo->lo_file_name, info->lo_file_name, LO_NAME_SIZE); | 
 | 	memcpy(lo->lo_crypt_name, info->lo_crypt_name, LO_NAME_SIZE); | 
 | 	lo->lo_file_name[LO_NAME_SIZE-1] = 0; | 
 | 	lo->lo_crypt_name[LO_NAME_SIZE-1] = 0; | 
 |  | 
 | 	if (!xfer) | 
 | 		xfer = &none_funcs; | 
 | 	lo->transfer = xfer->transfer; | 
 | 	lo->ioctl = xfer->ioctl; | 
 |  | 
 | 	if ((lo->lo_flags & LO_FLAGS_AUTOCLEAR) != | 
 | 	     (info->lo_flags & LO_FLAGS_AUTOCLEAR)) | 
 | 		lo->lo_flags ^= LO_FLAGS_AUTOCLEAR; | 
 |  | 
 | 	if ((info->lo_flags & LO_FLAGS_PARTSCAN) && | 
 | 	     !(lo->lo_flags & LO_FLAGS_PARTSCAN)) { | 
 | 		lo->lo_flags |= LO_FLAGS_PARTSCAN; | 
 | 		lo->lo_disk->flags &= ~GENHD_FL_NO_PART_SCAN; | 
 | 		ioctl_by_bdev(lo->lo_device, BLKRRPART, 0); | 
 | 	} | 
 |  | 
 | 	lo->lo_encrypt_key_size = info->lo_encrypt_key_size; | 
 | 	lo->lo_init[0] = info->lo_init[0]; | 
 | 	lo->lo_init[1] = info->lo_init[1]; | 
 | 	if (info->lo_encrypt_key_size) { | 
 | 		memcpy(lo->lo_encrypt_key, info->lo_encrypt_key, | 
 | 		       info->lo_encrypt_key_size); | 
 | 		lo->lo_key_owner = uid; | 
 | 	}	 | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | loop_get_status(struct loop_device *lo, struct loop_info64 *info) | 
 | { | 
 | 	struct file *file = lo->lo_backing_file; | 
 | 	struct kstat stat; | 
 | 	int error; | 
 |  | 
 | 	if (lo->lo_state != Lo_bound) | 
 | 		return -ENXIO; | 
 | 	error = vfs_getattr(&file->f_path, &stat); | 
 | 	if (error) | 
 | 		return error; | 
 | 	memset(info, 0, sizeof(*info)); | 
 | 	info->lo_number = lo->lo_number; | 
 | 	info->lo_device = huge_encode_dev(stat.dev); | 
 | 	info->lo_inode = stat.ino; | 
 | 	info->lo_rdevice = huge_encode_dev(lo->lo_device ? stat.rdev : stat.dev); | 
 | 	info->lo_offset = lo->lo_offset; | 
 | 	info->lo_sizelimit = lo->lo_sizelimit; | 
 | 	info->lo_flags = lo->lo_flags; | 
 | 	memcpy(info->lo_file_name, lo->lo_file_name, LO_NAME_SIZE); | 
 | 	memcpy(info->lo_crypt_name, lo->lo_crypt_name, LO_NAME_SIZE); | 
 | 	info->lo_encrypt_type = | 
 | 		lo->lo_encryption ? lo->lo_encryption->number : 0; | 
 | 	if (lo->lo_encrypt_key_size && capable(CAP_SYS_ADMIN)) { | 
 | 		info->lo_encrypt_key_size = lo->lo_encrypt_key_size; | 
 | 		memcpy(info->lo_encrypt_key, lo->lo_encrypt_key, | 
 | 		       lo->lo_encrypt_key_size); | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void | 
 | loop_info64_from_old(const struct loop_info *info, struct loop_info64 *info64) | 
 | { | 
 | 	memset(info64, 0, sizeof(*info64)); | 
 | 	info64->lo_number = info->lo_number; | 
 | 	info64->lo_device = info->lo_device; | 
 | 	info64->lo_inode = info->lo_inode; | 
 | 	info64->lo_rdevice = info->lo_rdevice; | 
 | 	info64->lo_offset = info->lo_offset; | 
 | 	info64->lo_sizelimit = 0; | 
 | 	info64->lo_encrypt_type = info->lo_encrypt_type; | 
 | 	info64->lo_encrypt_key_size = info->lo_encrypt_key_size; | 
 | 	info64->lo_flags = info->lo_flags; | 
 | 	info64->lo_init[0] = info->lo_init[0]; | 
 | 	info64->lo_init[1] = info->lo_init[1]; | 
 | 	if (info->lo_encrypt_type == LO_CRYPT_CRYPTOAPI) | 
 | 		memcpy(info64->lo_crypt_name, info->lo_name, LO_NAME_SIZE); | 
 | 	else | 
 | 		memcpy(info64->lo_file_name, info->lo_name, LO_NAME_SIZE); | 
 | 	memcpy(info64->lo_encrypt_key, info->lo_encrypt_key, LO_KEY_SIZE); | 
 | } | 
 |  | 
 | static int | 
 | loop_info64_to_old(const struct loop_info64 *info64, struct loop_info *info) | 
 | { | 
 | 	memset(info, 0, sizeof(*info)); | 
 | 	info->lo_number = info64->lo_number; | 
 | 	info->lo_device = info64->lo_device; | 
 | 	info->lo_inode = info64->lo_inode; | 
 | 	info->lo_rdevice = info64->lo_rdevice; | 
 | 	info->lo_offset = info64->lo_offset; | 
 | 	info->lo_encrypt_type = info64->lo_encrypt_type; | 
 | 	info->lo_encrypt_key_size = info64->lo_encrypt_key_size; | 
 | 	info->lo_flags = info64->lo_flags; | 
 | 	info->lo_init[0] = info64->lo_init[0]; | 
 | 	info->lo_init[1] = info64->lo_init[1]; | 
 | 	if (info->lo_encrypt_type == LO_CRYPT_CRYPTOAPI) | 
 | 		memcpy(info->lo_name, info64->lo_crypt_name, LO_NAME_SIZE); | 
 | 	else | 
 | 		memcpy(info->lo_name, info64->lo_file_name, LO_NAME_SIZE); | 
 | 	memcpy(info->lo_encrypt_key, info64->lo_encrypt_key, LO_KEY_SIZE); | 
 |  | 
 | 	/* error in case values were truncated */ | 
 | 	if (info->lo_device != info64->lo_device || | 
 | 	    info->lo_rdevice != info64->lo_rdevice || | 
 | 	    info->lo_inode != info64->lo_inode || | 
 | 	    info->lo_offset != info64->lo_offset) | 
 | 		return -EOVERFLOW; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | loop_set_status_old(struct loop_device *lo, const struct loop_info __user *arg) | 
 | { | 
 | 	struct loop_info info; | 
 | 	struct loop_info64 info64; | 
 |  | 
 | 	if (copy_from_user(&info, arg, sizeof (struct loop_info))) | 
 | 		return -EFAULT; | 
 | 	loop_info64_from_old(&info, &info64); | 
 | 	return loop_set_status(lo, &info64); | 
 | } | 
 |  | 
 | static int | 
 | loop_set_status64(struct loop_device *lo, const struct loop_info64 __user *arg) | 
 | { | 
 | 	struct loop_info64 info64; | 
 |  | 
 | 	if (copy_from_user(&info64, arg, sizeof (struct loop_info64))) | 
 | 		return -EFAULT; | 
 | 	return loop_set_status(lo, &info64); | 
 | } | 
 |  | 
 | static int | 
 | loop_get_status_old(struct loop_device *lo, struct loop_info __user *arg) { | 
 | 	struct loop_info info; | 
 | 	struct loop_info64 info64; | 
 | 	int err = 0; | 
 |  | 
 | 	if (!arg) | 
 | 		err = -EINVAL; | 
 | 	if (!err) | 
 | 		err = loop_get_status(lo, &info64); | 
 | 	if (!err) | 
 | 		err = loop_info64_to_old(&info64, &info); | 
 | 	if (!err && copy_to_user(arg, &info, sizeof(info))) | 
 | 		err = -EFAULT; | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int | 
 | loop_get_status64(struct loop_device *lo, struct loop_info64 __user *arg) { | 
 | 	struct loop_info64 info64; | 
 | 	int err = 0; | 
 |  | 
 | 	if (!arg) | 
 | 		err = -EINVAL; | 
 | 	if (!err) | 
 | 		err = loop_get_status(lo, &info64); | 
 | 	if (!err && copy_to_user(arg, &info64, sizeof(info64))) | 
 | 		err = -EFAULT; | 
 |  | 
 | 	return err; | 
 | } | 
 |  | 
 | static int loop_set_capacity(struct loop_device *lo, struct block_device *bdev) | 
 | { | 
 | 	if (unlikely(lo->lo_state != Lo_bound)) | 
 | 		return -ENXIO; | 
 |  | 
 | 	return figure_loop_size(lo, lo->lo_offset, lo->lo_sizelimit); | 
 | } | 
 |  | 
 | static int lo_ioctl(struct block_device *bdev, fmode_t mode, | 
 | 	unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct loop_device *lo = bdev->bd_disk->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock_nested(&lo->lo_ctl_mutex, 1); | 
 | 	switch (cmd) { | 
 | 	case LOOP_SET_FD: | 
 | 		err = loop_set_fd(lo, mode, bdev, arg); | 
 | 		break; | 
 | 	case LOOP_CHANGE_FD: | 
 | 		err = loop_change_fd(lo, bdev, arg); | 
 | 		break; | 
 | 	case LOOP_CLR_FD: | 
 | 		/* loop_clr_fd would have unlocked lo_ctl_mutex on success */ | 
 | 		err = loop_clr_fd(lo); | 
 | 		if (!err) | 
 | 			goto out_unlocked; | 
 | 		break; | 
 | 	case LOOP_SET_STATUS: | 
 | 		err = -EPERM; | 
 | 		if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN)) | 
 | 			err = loop_set_status_old(lo, | 
 | 					(struct loop_info __user *)arg); | 
 | 		break; | 
 | 	case LOOP_GET_STATUS: | 
 | 		err = loop_get_status_old(lo, (struct loop_info __user *) arg); | 
 | 		break; | 
 | 	case LOOP_SET_STATUS64: | 
 | 		err = -EPERM; | 
 | 		if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN)) | 
 | 			err = loop_set_status64(lo, | 
 | 					(struct loop_info64 __user *) arg); | 
 | 		break; | 
 | 	case LOOP_GET_STATUS64: | 
 | 		err = loop_get_status64(lo, (struct loop_info64 __user *) arg); | 
 | 		break; | 
 | 	case LOOP_SET_CAPACITY: | 
 | 		err = -EPERM; | 
 | 		if ((mode & FMODE_WRITE) || capable(CAP_SYS_ADMIN)) | 
 | 			err = loop_set_capacity(lo, bdev); | 
 | 		break; | 
 | 	default: | 
 | 		err = lo->ioctl ? lo->ioctl(lo, cmd, arg) : -EINVAL; | 
 | 	} | 
 | 	mutex_unlock(&lo->lo_ctl_mutex); | 
 |  | 
 | out_unlocked: | 
 | 	return err; | 
 | } | 
 |  | 
 | #ifdef CONFIG_COMPAT | 
 | struct compat_loop_info { | 
 | 	compat_int_t	lo_number;      /* ioctl r/o */ | 
 | 	compat_dev_t	lo_device;      /* ioctl r/o */ | 
 | 	compat_ulong_t	lo_inode;       /* ioctl r/o */ | 
 | 	compat_dev_t	lo_rdevice;     /* ioctl r/o */ | 
 | 	compat_int_t	lo_offset; | 
 | 	compat_int_t	lo_encrypt_type; | 
 | 	compat_int_t	lo_encrypt_key_size;    /* ioctl w/o */ | 
 | 	compat_int_t	lo_flags;       /* ioctl r/o */ | 
 | 	char		lo_name[LO_NAME_SIZE]; | 
 | 	unsigned char	lo_encrypt_key[LO_KEY_SIZE]; /* ioctl w/o */ | 
 | 	compat_ulong_t	lo_init[2]; | 
 | 	char		reserved[4]; | 
 | }; | 
 |  | 
 | /* | 
 |  * Transfer 32-bit compatibility structure in userspace to 64-bit loop info | 
 |  * - noinlined to reduce stack space usage in main part of driver | 
 |  */ | 
 | static noinline int | 
 | loop_info64_from_compat(const struct compat_loop_info __user *arg, | 
 | 			struct loop_info64 *info64) | 
 | { | 
 | 	struct compat_loop_info info; | 
 |  | 
 | 	if (copy_from_user(&info, arg, sizeof(info))) | 
 | 		return -EFAULT; | 
 |  | 
 | 	memset(info64, 0, sizeof(*info64)); | 
 | 	info64->lo_number = info.lo_number; | 
 | 	info64->lo_device = info.lo_device; | 
 | 	info64->lo_inode = info.lo_inode; | 
 | 	info64->lo_rdevice = info.lo_rdevice; | 
 | 	info64->lo_offset = info.lo_offset; | 
 | 	info64->lo_sizelimit = 0; | 
 | 	info64->lo_encrypt_type = info.lo_encrypt_type; | 
 | 	info64->lo_encrypt_key_size = info.lo_encrypt_key_size; | 
 | 	info64->lo_flags = info.lo_flags; | 
 | 	info64->lo_init[0] = info.lo_init[0]; | 
 | 	info64->lo_init[1] = info.lo_init[1]; | 
 | 	if (info.lo_encrypt_type == LO_CRYPT_CRYPTOAPI) | 
 | 		memcpy(info64->lo_crypt_name, info.lo_name, LO_NAME_SIZE); | 
 | 	else | 
 | 		memcpy(info64->lo_file_name, info.lo_name, LO_NAME_SIZE); | 
 | 	memcpy(info64->lo_encrypt_key, info.lo_encrypt_key, LO_KEY_SIZE); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* | 
 |  * Transfer 64-bit loop info to 32-bit compatibility structure in userspace | 
 |  * - noinlined to reduce stack space usage in main part of driver | 
 |  */ | 
 | static noinline int | 
 | loop_info64_to_compat(const struct loop_info64 *info64, | 
 | 		      struct compat_loop_info __user *arg) | 
 | { | 
 | 	struct compat_loop_info info; | 
 |  | 
 | 	memset(&info, 0, sizeof(info)); | 
 | 	info.lo_number = info64->lo_number; | 
 | 	info.lo_device = info64->lo_device; | 
 | 	info.lo_inode = info64->lo_inode; | 
 | 	info.lo_rdevice = info64->lo_rdevice; | 
 | 	info.lo_offset = info64->lo_offset; | 
 | 	info.lo_encrypt_type = info64->lo_encrypt_type; | 
 | 	info.lo_encrypt_key_size = info64->lo_encrypt_key_size; | 
 | 	info.lo_flags = info64->lo_flags; | 
 | 	info.lo_init[0] = info64->lo_init[0]; | 
 | 	info.lo_init[1] = info64->lo_init[1]; | 
 | 	if (info.lo_encrypt_type == LO_CRYPT_CRYPTOAPI) | 
 | 		memcpy(info.lo_name, info64->lo_crypt_name, LO_NAME_SIZE); | 
 | 	else | 
 | 		memcpy(info.lo_name, info64->lo_file_name, LO_NAME_SIZE); | 
 | 	memcpy(info.lo_encrypt_key, info64->lo_encrypt_key, LO_KEY_SIZE); | 
 |  | 
 | 	/* error in case values were truncated */ | 
 | 	if (info.lo_device != info64->lo_device || | 
 | 	    info.lo_rdevice != info64->lo_rdevice || | 
 | 	    info.lo_inode != info64->lo_inode || | 
 | 	    info.lo_offset != info64->lo_offset || | 
 | 	    info.lo_init[0] != info64->lo_init[0] || | 
 | 	    info.lo_init[1] != info64->lo_init[1]) | 
 | 		return -EOVERFLOW; | 
 |  | 
 | 	if (copy_to_user(arg, &info, sizeof(info))) | 
 | 		return -EFAULT; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int | 
 | loop_set_status_compat(struct loop_device *lo, | 
 | 		       const struct compat_loop_info __user *arg) | 
 | { | 
 | 	struct loop_info64 info64; | 
 | 	int ret; | 
 |  | 
 | 	ret = loop_info64_from_compat(arg, &info64); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 | 	return loop_set_status(lo, &info64); | 
 | } | 
 |  | 
 | static int | 
 | loop_get_status_compat(struct loop_device *lo, | 
 | 		       struct compat_loop_info __user *arg) | 
 | { | 
 | 	struct loop_info64 info64; | 
 | 	int err = 0; | 
 |  | 
 | 	if (!arg) | 
 | 		err = -EINVAL; | 
 | 	if (!err) | 
 | 		err = loop_get_status(lo, &info64); | 
 | 	if (!err) | 
 | 		err = loop_info64_to_compat(&info64, arg); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int lo_compat_ioctl(struct block_device *bdev, fmode_t mode, | 
 | 			   unsigned int cmd, unsigned long arg) | 
 | { | 
 | 	struct loop_device *lo = bdev->bd_disk->private_data; | 
 | 	int err; | 
 |  | 
 | 	switch(cmd) { | 
 | 	case LOOP_SET_STATUS: | 
 | 		mutex_lock(&lo->lo_ctl_mutex); | 
 | 		err = loop_set_status_compat( | 
 | 			lo, (const struct compat_loop_info __user *) arg); | 
 | 		mutex_unlock(&lo->lo_ctl_mutex); | 
 | 		break; | 
 | 	case LOOP_GET_STATUS: | 
 | 		mutex_lock(&lo->lo_ctl_mutex); | 
 | 		err = loop_get_status_compat( | 
 | 			lo, (struct compat_loop_info __user *) arg); | 
 | 		mutex_unlock(&lo->lo_ctl_mutex); | 
 | 		break; | 
 | 	case LOOP_SET_CAPACITY: | 
 | 	case LOOP_CLR_FD: | 
 | 	case LOOP_GET_STATUS64: | 
 | 	case LOOP_SET_STATUS64: | 
 | 		arg = (unsigned long) compat_ptr(arg); | 
 | 	case LOOP_SET_FD: | 
 | 	case LOOP_CHANGE_FD: | 
 | 		err = lo_ioctl(bdev, mode, cmd, arg); | 
 | 		break; | 
 | 	default: | 
 | 		err = -ENOIOCTLCMD; | 
 | 		break; | 
 | 	} | 
 | 	return err; | 
 | } | 
 | #endif | 
 |  | 
 | static int lo_open(struct block_device *bdev, fmode_t mode) | 
 | { | 
 | 	struct loop_device *lo; | 
 | 	int err = 0; | 
 |  | 
 | 	mutex_lock(&loop_index_mutex); | 
 | 	lo = bdev->bd_disk->private_data; | 
 | 	if (!lo) { | 
 | 		err = -ENXIO; | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	mutex_lock(&lo->lo_ctl_mutex); | 
 | 	lo->lo_refcnt++; | 
 | 	mutex_unlock(&lo->lo_ctl_mutex); | 
 | out: | 
 | 	mutex_unlock(&loop_index_mutex); | 
 | 	return err; | 
 | } | 
 |  | 
 | static void lo_release(struct gendisk *disk, fmode_t mode) | 
 | { | 
 | 	struct loop_device *lo = disk->private_data; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&lo->lo_ctl_mutex); | 
 |  | 
 | 	if (--lo->lo_refcnt) | 
 | 		goto out; | 
 |  | 
 | 	if (lo->lo_flags & LO_FLAGS_AUTOCLEAR) { | 
 | 		/* | 
 | 		 * In autoclear mode, stop the loop thread | 
 | 		 * and remove configuration after last close. | 
 | 		 */ | 
 | 		err = loop_clr_fd(lo); | 
 | 		if (!err) | 
 | 			return; | 
 | 	} else { | 
 | 		/* | 
 | 		 * Otherwise keep thread (if running) and config, | 
 | 		 * but flush possible ongoing bios in thread. | 
 | 		 */ | 
 | 		loop_flush(lo); | 
 | 	} | 
 |  | 
 | out: | 
 | 	mutex_unlock(&lo->lo_ctl_mutex); | 
 | } | 
 |  | 
 | static const struct block_device_operations lo_fops = { | 
 | 	.owner =	THIS_MODULE, | 
 | 	.open =		lo_open, | 
 | 	.release =	lo_release, | 
 | 	.ioctl =	lo_ioctl, | 
 | #ifdef CONFIG_COMPAT | 
 | 	.compat_ioctl =	lo_compat_ioctl, | 
 | #endif | 
 | }; | 
 |  | 
 | /* | 
 |  * And now the modules code and kernel interface. | 
 |  */ | 
 | static int max_loop; | 
 | module_param(max_loop, int, S_IRUGO); | 
 | MODULE_PARM_DESC(max_loop, "Maximum number of loop devices"); | 
 | module_param(max_part, int, S_IRUGO); | 
 | MODULE_PARM_DESC(max_part, "Maximum number of partitions per loop device"); | 
 | MODULE_LICENSE("GPL"); | 
 | MODULE_ALIAS_BLOCKDEV_MAJOR(LOOP_MAJOR); | 
 |  | 
 | int loop_register_transfer(struct loop_func_table *funcs) | 
 | { | 
 | 	unsigned int n = funcs->number; | 
 |  | 
 | 	if (n >= MAX_LO_CRYPT || xfer_funcs[n]) | 
 | 		return -EINVAL; | 
 | 	xfer_funcs[n] = funcs; | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int unregister_transfer_cb(int id, void *ptr, void *data) | 
 | { | 
 | 	struct loop_device *lo = ptr; | 
 | 	struct loop_func_table *xfer = data; | 
 |  | 
 | 	mutex_lock(&lo->lo_ctl_mutex); | 
 | 	if (lo->lo_encryption == xfer) | 
 | 		loop_release_xfer(lo); | 
 | 	mutex_unlock(&lo->lo_ctl_mutex); | 
 | 	return 0; | 
 | } | 
 |  | 
 | int loop_unregister_transfer(int number) | 
 | { | 
 | 	unsigned int n = number; | 
 | 	struct loop_func_table *xfer; | 
 |  | 
 | 	if (n == 0 || n >= MAX_LO_CRYPT || (xfer = xfer_funcs[n]) == NULL) | 
 | 		return -EINVAL; | 
 |  | 
 | 	xfer_funcs[n] = NULL; | 
 | 	idr_for_each(&loop_index_idr, &unregister_transfer_cb, xfer); | 
 | 	return 0; | 
 | } | 
 |  | 
 | EXPORT_SYMBOL(loop_register_transfer); | 
 | EXPORT_SYMBOL(loop_unregister_transfer); | 
 |  | 
 | static int loop_add(struct loop_device **l, int i) | 
 | { | 
 | 	struct loop_device *lo; | 
 | 	struct gendisk *disk; | 
 | 	int err; | 
 |  | 
 | 	err = -ENOMEM; | 
 | 	lo = kzalloc(sizeof(*lo), GFP_KERNEL); | 
 | 	if (!lo) | 
 | 		goto out; | 
 |  | 
 | 	lo->lo_state = Lo_unbound; | 
 |  | 
 | 	/* allocate id, if @id >= 0, we're requesting that specific id */ | 
 | 	if (i >= 0) { | 
 | 		err = idr_alloc(&loop_index_idr, lo, i, i + 1, GFP_KERNEL); | 
 | 		if (err == -ENOSPC) | 
 | 			err = -EEXIST; | 
 | 	} else { | 
 | 		err = idr_alloc(&loop_index_idr, lo, 0, 0, GFP_KERNEL); | 
 | 	} | 
 | 	if (err < 0) | 
 | 		goto out_free_dev; | 
 | 	i = err; | 
 |  | 
 | 	err = -ENOMEM; | 
 | 	lo->lo_queue = blk_alloc_queue(GFP_KERNEL); | 
 | 	if (!lo->lo_queue) | 
 | 		goto out_free_idr; | 
 |  | 
 | 	/* | 
 | 	 * set queue make_request_fn | 
 | 	 */ | 
 | 	blk_queue_make_request(lo->lo_queue, loop_make_request); | 
 | 	lo->lo_queue->queuedata = lo; | 
 |  | 
 | 	disk = lo->lo_disk = alloc_disk(1 << part_shift); | 
 | 	if (!disk) | 
 | 		goto out_free_queue; | 
 |  | 
 | 	/* | 
 | 	 * Disable partition scanning by default. The in-kernel partition | 
 | 	 * scanning can be requested individually per-device during its | 
 | 	 * setup. Userspace can always add and remove partitions from all | 
 | 	 * devices. The needed partition minors are allocated from the | 
 | 	 * extended minor space, the main loop device numbers will continue | 
 | 	 * to match the loop minors, regardless of the number of partitions | 
 | 	 * used. | 
 | 	 * | 
 | 	 * If max_part is given, partition scanning is globally enabled for | 
 | 	 * all loop devices. The minors for the main loop devices will be | 
 | 	 * multiples of max_part. | 
 | 	 * | 
 | 	 * Note: Global-for-all-devices, set-only-at-init, read-only module | 
 | 	 * parameteters like 'max_loop' and 'max_part' make things needlessly | 
 | 	 * complicated, are too static, inflexible and may surprise | 
 | 	 * userspace tools. Parameters like this in general should be avoided. | 
 | 	 */ | 
 | 	if (!part_shift) | 
 | 		disk->flags |= GENHD_FL_NO_PART_SCAN; | 
 | 	disk->flags |= GENHD_FL_EXT_DEVT; | 
 | 	mutex_init(&lo->lo_ctl_mutex); | 
 | 	lo->lo_number		= i; | 
 | 	lo->lo_thread		= NULL; | 
 | 	init_waitqueue_head(&lo->lo_event); | 
 | 	init_waitqueue_head(&lo->lo_req_wait); | 
 | 	spin_lock_init(&lo->lo_lock); | 
 | 	disk->major		= LOOP_MAJOR; | 
 | 	disk->first_minor	= i << part_shift; | 
 | 	disk->fops		= &lo_fops; | 
 | 	disk->private_data	= lo; | 
 | 	disk->queue		= lo->lo_queue; | 
 | 	sprintf(disk->disk_name, "loop%d", i); | 
 | 	add_disk(disk); | 
 | 	*l = lo; | 
 | 	return lo->lo_number; | 
 |  | 
 | out_free_queue: | 
 | 	blk_cleanup_queue(lo->lo_queue); | 
 | out_free_idr: | 
 | 	idr_remove(&loop_index_idr, i); | 
 | out_free_dev: | 
 | 	kfree(lo); | 
 | out: | 
 | 	return err; | 
 | } | 
 |  | 
 | static void loop_remove(struct loop_device *lo) | 
 | { | 
 | 	del_gendisk(lo->lo_disk); | 
 | 	blk_cleanup_queue(lo->lo_queue); | 
 | 	put_disk(lo->lo_disk); | 
 | 	kfree(lo); | 
 | } | 
 |  | 
 | static int find_free_cb(int id, void *ptr, void *data) | 
 | { | 
 | 	struct loop_device *lo = ptr; | 
 | 	struct loop_device **l = data; | 
 |  | 
 | 	if (lo->lo_state == Lo_unbound) { | 
 | 		*l = lo; | 
 | 		return 1; | 
 | 	} | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int loop_lookup(struct loop_device **l, int i) | 
 | { | 
 | 	struct loop_device *lo; | 
 | 	int ret = -ENODEV; | 
 |  | 
 | 	if (i < 0) { | 
 | 		int err; | 
 |  | 
 | 		err = idr_for_each(&loop_index_idr, &find_free_cb, &lo); | 
 | 		if (err == 1) { | 
 | 			*l = lo; | 
 | 			ret = lo->lo_number; | 
 | 		} | 
 | 		goto out; | 
 | 	} | 
 |  | 
 | 	/* lookup and return a specific i */ | 
 | 	lo = idr_find(&loop_index_idr, i); | 
 | 	if (lo) { | 
 | 		*l = lo; | 
 | 		ret = lo->lo_number; | 
 | 	} | 
 | out: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static struct kobject *loop_probe(dev_t dev, int *part, void *data) | 
 | { | 
 | 	struct loop_device *lo; | 
 | 	struct kobject *kobj; | 
 | 	int err; | 
 |  | 
 | 	mutex_lock(&loop_index_mutex); | 
 | 	err = loop_lookup(&lo, MINOR(dev) >> part_shift); | 
 | 	if (err < 0) | 
 | 		err = loop_add(&lo, MINOR(dev) >> part_shift); | 
 | 	if (err < 0) | 
 | 		kobj = NULL; | 
 | 	else | 
 | 		kobj = get_disk(lo->lo_disk); | 
 | 	mutex_unlock(&loop_index_mutex); | 
 |  | 
 | 	*part = 0; | 
 | 	return kobj; | 
 | } | 
 |  | 
 | static long loop_control_ioctl(struct file *file, unsigned int cmd, | 
 | 			       unsigned long parm) | 
 | { | 
 | 	struct loop_device *lo; | 
 | 	int ret = -ENOSYS; | 
 |  | 
 | 	mutex_lock(&loop_index_mutex); | 
 | 	switch (cmd) { | 
 | 	case LOOP_CTL_ADD: | 
 | 		ret = loop_lookup(&lo, parm); | 
 | 		if (ret >= 0) { | 
 | 			ret = -EEXIST; | 
 | 			break; | 
 | 		} | 
 | 		ret = loop_add(&lo, parm); | 
 | 		break; | 
 | 	case LOOP_CTL_REMOVE: | 
 | 		ret = loop_lookup(&lo, parm); | 
 | 		if (ret < 0) | 
 | 			break; | 
 | 		mutex_lock(&lo->lo_ctl_mutex); | 
 | 		if (lo->lo_state != Lo_unbound) { | 
 | 			ret = -EBUSY; | 
 | 			mutex_unlock(&lo->lo_ctl_mutex); | 
 | 			break; | 
 | 		} | 
 | 		if (lo->lo_refcnt > 0) { | 
 | 			ret = -EBUSY; | 
 | 			mutex_unlock(&lo->lo_ctl_mutex); | 
 | 			break; | 
 | 		} | 
 | 		lo->lo_disk->private_data = NULL; | 
 | 		mutex_unlock(&lo->lo_ctl_mutex); | 
 | 		idr_remove(&loop_index_idr, lo->lo_number); | 
 | 		loop_remove(lo); | 
 | 		break; | 
 | 	case LOOP_CTL_GET_FREE: | 
 | 		ret = loop_lookup(&lo, -1); | 
 | 		if (ret >= 0) | 
 | 			break; | 
 | 		ret = loop_add(&lo, -1); | 
 | 	} | 
 | 	mutex_unlock(&loop_index_mutex); | 
 |  | 
 | 	return ret; | 
 | } | 
 |  | 
 | static const struct file_operations loop_ctl_fops = { | 
 | 	.open		= nonseekable_open, | 
 | 	.unlocked_ioctl	= loop_control_ioctl, | 
 | 	.compat_ioctl	= loop_control_ioctl, | 
 | 	.owner		= THIS_MODULE, | 
 | 	.llseek		= noop_llseek, | 
 | }; | 
 |  | 
 | static struct miscdevice loop_misc = { | 
 | 	.minor		= LOOP_CTRL_MINOR, | 
 | 	.name		= "loop-control", | 
 | 	.fops		= &loop_ctl_fops, | 
 | }; | 
 |  | 
 | MODULE_ALIAS_MISCDEV(LOOP_CTRL_MINOR); | 
 | MODULE_ALIAS("devname:loop-control"); | 
 |  | 
 | static int __init loop_init(void) | 
 | { | 
 | 	int i, nr; | 
 | 	unsigned long range; | 
 | 	struct loop_device *lo; | 
 | 	int err; | 
 |  | 
 | 	err = misc_register(&loop_misc); | 
 | 	if (err < 0) | 
 | 		return err; | 
 |  | 
 | 	part_shift = 0; | 
 | 	if (max_part > 0) { | 
 | 		part_shift = fls(max_part); | 
 |  | 
 | 		/* | 
 | 		 * Adjust max_part according to part_shift as it is exported | 
 | 		 * to user space so that user can decide correct minor number | 
 | 		 * if [s]he want to create more devices. | 
 | 		 * | 
 | 		 * Note that -1 is required because partition 0 is reserved | 
 | 		 * for the whole disk. | 
 | 		 */ | 
 | 		max_part = (1UL << part_shift) - 1; | 
 | 	} | 
 |  | 
 | 	if ((1UL << part_shift) > DISK_MAX_PARTS) { | 
 | 		err = -EINVAL; | 
 | 		goto misc_out; | 
 | 	} | 
 |  | 
 | 	if (max_loop > 1UL << (MINORBITS - part_shift)) { | 
 | 		err = -EINVAL; | 
 | 		goto misc_out; | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * If max_loop is specified, create that many devices upfront. | 
 | 	 * This also becomes a hard limit. If max_loop is not specified, | 
 | 	 * create CONFIG_BLK_DEV_LOOP_MIN_COUNT loop devices at module | 
 | 	 * init time. Loop devices can be requested on-demand with the | 
 | 	 * /dev/loop-control interface, or be instantiated by accessing | 
 | 	 * a 'dead' device node. | 
 | 	 */ | 
 | 	if (max_loop) { | 
 | 		nr = max_loop; | 
 | 		range = max_loop << part_shift; | 
 | 	} else { | 
 | 		nr = CONFIG_BLK_DEV_LOOP_MIN_COUNT; | 
 | 		range = 1UL << MINORBITS; | 
 | 	} | 
 |  | 
 | 	if (register_blkdev(LOOP_MAJOR, "loop")) { | 
 | 		err = -EIO; | 
 | 		goto misc_out; | 
 | 	} | 
 |  | 
 | 	blk_register_region(MKDEV(LOOP_MAJOR, 0), range, | 
 | 				  THIS_MODULE, loop_probe, NULL, NULL); | 
 |  | 
 | 	/* pre-create number of devices given by config or max_loop */ | 
 | 	mutex_lock(&loop_index_mutex); | 
 | 	for (i = 0; i < nr; i++) | 
 | 		loop_add(&lo, i); | 
 | 	mutex_unlock(&loop_index_mutex); | 
 |  | 
 | 	printk(KERN_INFO "loop: module loaded\n"); | 
 | 	return 0; | 
 |  | 
 | misc_out: | 
 | 	misc_deregister(&loop_misc); | 
 | 	return err; | 
 | } | 
 |  | 
 | static int loop_exit_cb(int id, void *ptr, void *data) | 
 | { | 
 | 	struct loop_device *lo = ptr; | 
 |  | 
 | 	loop_remove(lo); | 
 | 	return 0; | 
 | } | 
 |  | 
 | static void __exit loop_exit(void) | 
 | { | 
 | 	unsigned long range; | 
 |  | 
 | 	range = max_loop ? max_loop << part_shift : 1UL << MINORBITS; | 
 |  | 
 | 	idr_for_each(&loop_index_idr, &loop_exit_cb, NULL); | 
 | 	idr_destroy(&loop_index_idr); | 
 |  | 
 | 	blk_unregister_region(MKDEV(LOOP_MAJOR, 0), range); | 
 | 	unregister_blkdev(LOOP_MAJOR, "loop"); | 
 |  | 
 | 	misc_deregister(&loop_misc); | 
 | } | 
 |  | 
 | module_init(loop_init); | 
 | module_exit(loop_exit); | 
 |  | 
 | #ifndef MODULE | 
 | static int __init max_loop_setup(char *str) | 
 | { | 
 | 	max_loop = simple_strtol(str, NULL, 0); | 
 | 	return 1; | 
 | } | 
 |  | 
 | __setup("max_loop=", max_loop_setup); | 
 | #endif |