| config HOSTAP |
| tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)" |
| select WIRELESS_EXT |
| select WEXT_SPY |
| select WEXT_PRIV |
| select CRYPTO |
| select CRYPTO_ARC4 |
| select CRYPTO_ECB |
| select CRYPTO_AES |
| select CRYPTO_MICHAEL_MIC |
| select CRYPTO_ECB |
| select CRC32 |
| select LIB80211 |
| select LIB80211_CRYPT_WEP |
| select LIB80211_CRYPT_TKIP |
| select LIB80211_CRYPT_CCMP |
| ---help--- |
| Shared driver code for IEEE 802.11b wireless cards based on |
| Intersil Prism2/2.5/3 chipset. This driver supports so called |
| Host AP mode that allows the card to act as an IEEE 802.11 |
| access point. |
| |
| See <http://hostap.epitest.fi/> for more information about the |
| Host AP driver configuration and tools. This site includes |
| information and tools (hostapd and wpa_supplicant) for WPA/WPA2 |
| support. |
| |
| This option includes the base Host AP driver code that is shared by |
| different hardware models. You will also need to enable support for |
| PLX/PCI/CS version of the driver to actually use the driver. |
| |
| The driver can be compiled as a module and it will be called |
| hostap. |
| |
| config HOSTAP_FIRMWARE |
| bool "Support downloading firmware images with Host AP driver" |
| depends on HOSTAP |
| ---help--- |
| Configure Host AP driver to include support for firmware image |
| download. This option by itself only enables downloading to the |
| volatile memory, i.e. the card RAM. This option is required to |
| support cards that don't have firmware in flash, such as D-Link |
| DWL-520 rev E and D-Link DWL-650 rev P. |
| |
| Firmware image downloading needs a user space tool, prism2_srec. |
| It is available from http://hostap.epitest.fi/. |
| |
| config HOSTAP_FIRMWARE_NVRAM |
| bool "Support for non-volatile firmware download" |
| depends on HOSTAP_FIRMWARE |
| ---help--- |
| Allow Host AP driver to write firmware images to the non-volatile |
| card memory, i.e. flash memory that survives power cycling. |
| Enable this option if you want to be able to change card firmware |
| permanently. |
| |
| Firmware image downloading needs a user space tool, prism2_srec. |
| It is available from http://hostap.epitest.fi/. |
| |
| config HOSTAP_PLX |
| tristate "Host AP driver for Prism2/2.5/3 in PLX9052 PCI adaptors" |
| depends on PCI && HOSTAP |
| ---help--- |
| Host AP driver's version for Prism2/2.5/3 PC Cards in PLX9052 based |
| PCI adaptors. |
| |
| "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this |
| driver and its help text includes more information about the Host AP |
| driver. |
| |
| The driver can be compiled as a module and will be named |
| hostap_plx. |
| |
| config HOSTAP_PCI |
| tristate "Host AP driver for Prism2.5 PCI adaptors" |
| depends on PCI && HOSTAP |
| ---help--- |
| Host AP driver's version for Prism2.5 PCI adaptors. |
| |
| "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this |
| driver and its help text includes more information about the Host AP |
| driver. |
| |
| The driver can be compiled as a module and will be named |
| hostap_pci. |
| |
| config HOSTAP_CS |
| tristate "Host AP driver for Prism2/2.5/3 PC Cards" |
| depends on PCMCIA && HOSTAP |
| ---help--- |
| Host AP driver's version for Prism2/2.5/3 PC Cards. |
| |
| "Host AP support for Prism2/2.5/3 IEEE 802.11b" is required for this |
| driver and its help text includes more information about the Host AP |
| driver. |
| |
| The driver can be compiled as a module and will be named |
| hostap_cs. |
