|  | /* | 
|  | * Copyright 2012 Freescale Semiconductor, Inc. | 
|  | * Copyright (C) 2012 Marek Vasut <marex@denx.de> | 
|  | * on behalf of DENX Software Engineering GmbH | 
|  | * | 
|  | * The code contained herein is licensed under the GNU General Public | 
|  | * License. You may obtain a copy of the GNU General Public License | 
|  | * Version 2 or later at the following locations: | 
|  | * | 
|  | * http://www.opensource.org/licenses/gpl-license.html | 
|  | * http://www.gnu.org/copyleft/gpl.html | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/of_platform.h> | 
|  | #include <linux/of_gpio.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/pm_runtime.h> | 
|  | #include <linux/dma-mapping.h> | 
|  | #include <linux/usb/chipidea.h> | 
|  | #include <linux/clk.h> | 
|  | #include <linux/regulator/consumer.h> | 
|  | #include <linux/pinctrl/consumer.h> | 
|  |  | 
|  | #include "ci.h" | 
|  | #include "ci13xxx_imx.h" | 
|  |  | 
|  | #define pdev_to_phy(pdev) \ | 
|  | ((struct usb_phy *)platform_get_drvdata(pdev)) | 
|  |  | 
|  | struct ci13xxx_imx_data { | 
|  | struct device_node *phy_np; | 
|  | struct usb_phy *phy; | 
|  | struct platform_device *ci_pdev; | 
|  | struct clk *clk; | 
|  | struct regulator *reg_vbus; | 
|  | }; | 
|  |  | 
|  | static const struct usbmisc_ops *usbmisc_ops; | 
|  |  | 
|  | /* Common functions shared by usbmisc drivers */ | 
|  |  | 
|  | int usbmisc_set_ops(const struct usbmisc_ops *ops) | 
|  | { | 
|  | if (usbmisc_ops) | 
|  | return -EBUSY; | 
|  |  | 
|  | usbmisc_ops = ops; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usbmisc_set_ops); | 
|  |  | 
|  | void usbmisc_unset_ops(const struct usbmisc_ops *ops) | 
|  | { | 
|  | usbmisc_ops = NULL; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usbmisc_unset_ops); | 
|  |  | 
|  | int usbmisc_get_init_data(struct device *dev, struct usbmisc_usb_device *usbdev) | 
|  | { | 
|  | struct device_node *np = dev->of_node; | 
|  | struct of_phandle_args args; | 
|  | int ret; | 
|  |  | 
|  | usbdev->dev = dev; | 
|  |  | 
|  | ret = of_parse_phandle_with_args(np, "fsl,usbmisc", "#index-cells", | 
|  | 0, &args); | 
|  | if (ret) { | 
|  | dev_err(dev, "Failed to parse property fsl,usbmisc, errno %d\n", | 
|  | ret); | 
|  | memset(usbdev, 0, sizeof(*usbdev)); | 
|  | return ret; | 
|  | } | 
|  | usbdev->index = args.args[0]; | 
|  | of_node_put(args.np); | 
|  |  | 
|  | if (of_find_property(np, "disable-over-current", NULL)) | 
|  | usbdev->disable_oc = 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(usbmisc_get_init_data); | 
|  |  | 
|  | /* End of common functions shared by usbmisc drivers*/ | 
|  |  | 
|  | static struct ci13xxx_platform_data ci13xxx_imx_platdata __devinitdata  = { | 
|  | .name			= "ci13xxx_imx", | 
|  | .flags			= CI13XXX_REQUIRE_TRANSCEIVER | | 
|  | CI13XXX_PULLUP_ON_VBUS | | 
|  | CI13XXX_DISABLE_STREAMING, | 
|  | .capoffset		= DEF_CAPOFFSET, | 
|  | }; | 
|  |  | 
|  | static int __devinit ci13xxx_imx_probe(struct platform_device *pdev) | 
|  | { | 
|  | struct ci13xxx_imx_data *data; | 
|  | struct platform_device *plat_ci, *phy_pdev; | 
|  | struct device_node *phy_np; | 
|  | struct resource *res; | 
|  | struct regulator *reg_vbus; | 
|  | struct pinctrl *pinctrl; | 
|  | int ret; | 
|  |  | 
|  | if (of_find_property(pdev->dev.of_node, "fsl,usbmisc", NULL) | 
|  | && !usbmisc_ops) | 
|  | return -EPROBE_DEFER; | 
|  |  | 
|  | data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); | 
|  | if (!data) { | 
|  | dev_err(&pdev->dev, "Failed to allocate CI13xxx-IMX data!\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | 
|  | if (!res) { | 
|  | dev_err(&pdev->dev, "Can't get device resources!\n"); | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | pinctrl = devm_pinctrl_get_select_default(&pdev->dev); | 
|  | if (IS_ERR(pinctrl)) | 
|  | dev_warn(&pdev->dev, "pinctrl get/select failed, err=%ld\n", | 
|  | PTR_ERR(pinctrl)); | 
|  |  | 
|  | data->clk = devm_clk_get(&pdev->dev, NULL); | 
|  | if (IS_ERR(data->clk)) { | 
|  | dev_err(&pdev->dev, | 
|  | "Failed to get clock, err=%ld\n", PTR_ERR(data->clk)); | 
|  | return PTR_ERR(data->clk); | 
|  | } | 
|  |  | 
|  | ret = clk_prepare_enable(data->clk); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, | 
|  | "Failed to prepare or enable clock, err=%d\n", ret); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | phy_np = of_parse_phandle(pdev->dev.of_node, "fsl,usbphy", 0); | 
|  | if (phy_np) { | 
|  | data->phy_np = phy_np; | 
|  | phy_pdev = of_find_device_by_node(phy_np); | 
|  | if (phy_pdev) { | 
|  | struct usb_phy *phy; | 
|  | phy = pdev_to_phy(phy_pdev); | 
|  | if (phy && | 
|  | try_module_get(phy_pdev->dev.driver->owner)) { | 
|  | usb_phy_init(phy); | 
|  | data->phy = phy; | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /* we only support host now, so enable vbus here */ | 
|  | reg_vbus = devm_regulator_get(&pdev->dev, "vbus"); | 
|  | if (!IS_ERR(reg_vbus)) { | 
|  | ret = regulator_enable(reg_vbus); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, | 
|  | "Failed to enable vbus regulator, err=%d\n", | 
|  | ret); | 
|  | goto put_np; | 
|  | } | 
|  | data->reg_vbus = reg_vbus; | 
|  | } else { | 
|  | reg_vbus = NULL; | 
|  | } | 
|  |  | 
|  | ci13xxx_imx_platdata.phy = data->phy; | 
|  |  | 
|  | if (!pdev->dev.dma_mask) { | 
|  | pdev->dev.dma_mask = devm_kzalloc(&pdev->dev, | 
|  | sizeof(*pdev->dev.dma_mask), GFP_KERNEL); | 
|  | if (!pdev->dev.dma_mask) { | 
|  | ret = -ENOMEM; | 
|  | dev_err(&pdev->dev, "Failed to alloc dma_mask!\n"); | 
|  | goto err; | 
|  | } | 
|  | *pdev->dev.dma_mask = DMA_BIT_MASK(32); | 
|  | dma_set_coherent_mask(&pdev->dev, *pdev->dev.dma_mask); | 
|  | } | 
|  |  | 
|  | if (usbmisc_ops && usbmisc_ops->init) { | 
|  | ret = usbmisc_ops->init(&pdev->dev); | 
|  | if (ret) { | 
|  | dev_err(&pdev->dev, | 
|  | "usbmisc init failed, ret=%d\n", ret); | 
|  | goto err; | 
|  | } | 
|  | } | 
|  |  | 
|  | plat_ci = ci13xxx_add_device(&pdev->dev, | 
|  | pdev->resource, pdev->num_resources, | 
|  | &ci13xxx_imx_platdata); | 
|  | if (IS_ERR(plat_ci)) { | 
|  | ret = PTR_ERR(plat_ci); | 
|  | dev_err(&pdev->dev, | 
|  | "Can't register ci_hdrc platform device, err=%d\n", | 
|  | ret); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | data->ci_pdev = plat_ci; | 
|  | platform_set_drvdata(pdev, data); | 
|  |  | 
|  | pm_runtime_no_callbacks(&pdev->dev); | 
|  | pm_runtime_enable(&pdev->dev); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | if (reg_vbus) | 
|  | regulator_disable(reg_vbus); | 
|  | put_np: | 
|  | if (phy_np) | 
|  | of_node_put(phy_np); | 
|  | clk_disable_unprepare(data->clk); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit ci13xxx_imx_remove(struct platform_device *pdev) | 
|  | { | 
|  | struct ci13xxx_imx_data *data = platform_get_drvdata(pdev); | 
|  |  | 
|  | pm_runtime_disable(&pdev->dev); | 
|  | ci13xxx_remove_device(data->ci_pdev); | 
|  |  | 
|  | if (data->reg_vbus) | 
|  | regulator_disable(data->reg_vbus); | 
|  |  | 
|  | if (data->phy) { | 
|  | usb_phy_shutdown(data->phy); | 
|  | module_put(data->phy->dev->driver->owner); | 
|  | } | 
|  |  | 
|  | of_node_put(data->phy_np); | 
|  |  | 
|  | clk_disable_unprepare(data->clk); | 
|  |  | 
|  | platform_set_drvdata(pdev, NULL); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct of_device_id ci13xxx_imx_dt_ids[] = { | 
|  | { .compatible = "fsl,imx27-usb", }, | 
|  | { /* sentinel */ } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(of, ci13xxx_imx_dt_ids); | 
|  |  | 
|  | static struct platform_driver ci13xxx_imx_driver = { | 
|  | .probe = ci13xxx_imx_probe, | 
|  | .remove = __devexit_p(ci13xxx_imx_remove), | 
|  | .driver = { | 
|  | .name = "imx_usb", | 
|  | .owner = THIS_MODULE, | 
|  | .of_match_table = ci13xxx_imx_dt_ids, | 
|  | }, | 
|  | }; | 
|  |  | 
|  | module_platform_driver(ci13xxx_imx_driver); | 
|  |  | 
|  | MODULE_ALIAS("platform:imx-usb"); | 
|  | MODULE_LICENSE("GPL v2"); | 
|  | MODULE_DESCRIPTION("CI13xxx i.MX USB binding"); | 
|  | MODULE_AUTHOR("Marek Vasut <marex@denx.de>"); | 
|  | MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>"); |