|  | /* | 
|  | * Copyright (c) 2012 Qualcomm Atheros, Inc. | 
|  | * | 
|  | * Permission to use, copy, modify, and/or distribute this software for any | 
|  | * purpose with or without fee is hereby granted, provided that the above | 
|  | * copyright notice and this permission notice appear in all copies. | 
|  | * | 
|  | * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | 
|  | * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | 
|  | * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | 
|  | * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | 
|  | * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | 
|  | * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | 
|  | * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | 
|  | */ | 
|  |  | 
|  | #include "ath9k.h" | 
|  |  | 
|  | /* | 
|  | * TX polling - checks if the TX engine is stuck somewhere | 
|  | * and issues a chip reset if so. | 
|  | */ | 
|  | void ath_tx_complete_poll_work(struct work_struct *work) | 
|  | { | 
|  | struct ath_softc *sc = container_of(work, struct ath_softc, | 
|  | tx_complete_work.work); | 
|  | struct ath_txq *txq; | 
|  | int i; | 
|  | bool needreset = false; | 
|  | #ifdef CONFIG_ATH9K_DEBUGFS | 
|  | sc->tx_complete_poll_work_seen++; | 
|  | #endif | 
|  |  | 
|  | for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) | 
|  | if (ATH_TXQ_SETUP(sc, i)) { | 
|  | txq = &sc->tx.txq[i]; | 
|  | ath_txq_lock(sc, txq); | 
|  | if (txq->axq_depth) { | 
|  | if (txq->axq_tx_inprogress) { | 
|  | needreset = true; | 
|  | ath_txq_unlock(sc, txq); | 
|  | break; | 
|  | } else { | 
|  | txq->axq_tx_inprogress = true; | 
|  | } | 
|  | } | 
|  | ath_txq_unlock_complete(sc, txq); | 
|  | } | 
|  |  | 
|  | if (needreset) { | 
|  | ath_dbg(ath9k_hw_common(sc->sc_ah), RESET, | 
|  | "tx hung, resetting the chip\n"); | 
|  | ath9k_queue_reset(sc, RESET_TYPE_TX_HANG); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, | 
|  | msecs_to_jiffies(ATH_TX_COMPLETE_POLL_INT)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Checks if the BB/MAC is hung. | 
|  | */ | 
|  | void ath_hw_check(struct work_struct *work) | 
|  | { | 
|  | struct ath_softc *sc = container_of(work, struct ath_softc, hw_check_work); | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  | unsigned long flags; | 
|  | int busy; | 
|  | u8 is_alive, nbeacon = 1; | 
|  | enum ath_reset_type type; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | is_alive = ath9k_hw_check_alive(sc->sc_ah); | 
|  |  | 
|  | if (is_alive && !AR_SREV_9300(sc->sc_ah)) | 
|  | goto out; | 
|  | else if (!is_alive && AR_SREV_9300(sc->sc_ah)) { | 
|  | ath_dbg(common, RESET, | 
|  | "DCU stuck is detected. Schedule chip reset\n"); | 
|  | type = RESET_TYPE_MAC_HANG; | 
|  | goto sched_reset; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&common->cc_lock, flags); | 
|  | busy = ath_update_survey_stats(sc); | 
|  | spin_unlock_irqrestore(&common->cc_lock, flags); | 
|  |  | 
|  | ath_dbg(common, RESET, "Possible baseband hang, busy=%d (try %d)\n", | 
|  | busy, sc->hw_busy_count + 1); | 
|  | if (busy >= 99) { | 
|  | if (++sc->hw_busy_count >= 3) { | 
|  | type = RESET_TYPE_BB_HANG; | 
|  | goto sched_reset; | 
|  | } | 
|  | } else if (busy >= 0) { | 
|  | sc->hw_busy_count = 0; | 
|  | nbeacon = 3; | 
|  | } | 
|  |  | 
|  | ath_start_rx_poll(sc, nbeacon); | 
|  | goto out; | 
|  |  | 
|  | sched_reset: | 
|  | ath9k_queue_reset(sc, type); | 
|  | out: | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * PLL-WAR for AR9485/AR9340 | 
|  | */ | 
|  | static bool ath_hw_pll_rx_hang_check(struct ath_softc *sc, u32 pll_sqsum) | 
|  | { | 
|  | static int count; | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  |  | 
|  | if (pll_sqsum >= 0x40000) { | 
|  | count++; | 
|  | if (count == 3) { | 
|  | ath_dbg(common, RESET, "PLL WAR, resetting the chip\n"); | 
|  | ath9k_queue_reset(sc, RESET_TYPE_PLL_HANG); | 
|  | count = 0; | 
|  | return true; | 
|  | } | 
|  | } else { | 
|  | count = 0; | 
|  | } | 
|  |  | 
|  | return false; | 
|  | } | 
|  |  | 
|  | void ath_hw_pll_work(struct work_struct *work) | 
|  | { | 
|  | u32 pll_sqsum; | 
|  | struct ath_softc *sc = container_of(work, struct ath_softc, | 
|  | hw_pll_work.work); | 
|  | /* | 
|  | * ensure that the PLL WAR is executed only | 
|  | * after the STA is associated (or) if the | 
|  | * beaconing had started in interfaces that | 
|  | * uses beacons. | 
|  | */ | 
|  | if (!test_bit(SC_OP_BEACONS, &sc->sc_flags)) | 
|  | return; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | pll_sqsum = ar9003_get_pll_sqsum_dvc(sc->sc_ah); | 
|  | ath9k_ps_restore(sc); | 
|  | if (ath_hw_pll_rx_hang_check(sc, pll_sqsum)) | 
|  | return; | 
|  |  | 
|  | ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, | 
|  | msecs_to_jiffies(ATH_PLL_WORK_INTERVAL)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * RX Polling - monitors baseband hangs. | 
|  | */ | 
|  | void ath_start_rx_poll(struct ath_softc *sc, u8 nbeacon) | 
|  | { | 
|  | if (!AR_SREV_9300(sc->sc_ah)) | 
|  | return; | 
|  |  | 
|  | if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) | 
|  | return; | 
|  |  | 
|  | mod_timer(&sc->rx_poll_timer, jiffies + msecs_to_jiffies | 
|  | (nbeacon * sc->cur_beacon_conf.beacon_interval)); | 
|  | } | 
|  |  | 
|  | void ath_rx_poll(unsigned long data) | 
|  | { | 
|  | struct ath_softc *sc = (struct ath_softc *)data; | 
|  |  | 
|  | ieee80211_queue_work(sc->hw, &sc->hw_check_work); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * PA Pre-distortion. | 
|  | */ | 
|  | static void ath_paprd_activate(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath9k_hw_cal_data *caldata = ah->caldata; | 
|  | int chain; | 
|  |  | 
|  | if (!caldata || !caldata->paprd_done) | 
|  | return; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  | ar9003_paprd_enable(ah, false); | 
|  | for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) { | 
|  | if (!(ah->txchainmask & BIT(chain))) | 
|  | continue; | 
|  |  | 
|  | ar9003_paprd_populate_single_table(ah, caldata, chain); | 
|  | } | 
|  |  | 
|  | ar9003_paprd_enable(ah, true); | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | static bool ath_paprd_send_frame(struct ath_softc *sc, struct sk_buff *skb, int chain) | 
|  | { | 
|  | struct ieee80211_hw *hw = sc->hw; | 
|  | struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | struct ath_tx_control txctl; | 
|  | int time_left; | 
|  |  | 
|  | memset(&txctl, 0, sizeof(txctl)); | 
|  | txctl.txq = sc->tx.txq_map[WME_AC_BE]; | 
|  |  | 
|  | memset(tx_info, 0, sizeof(*tx_info)); | 
|  | tx_info->band = hw->conf.channel->band; | 
|  | tx_info->flags |= IEEE80211_TX_CTL_NO_ACK; | 
|  | tx_info->control.rates[0].idx = 0; | 
|  | tx_info->control.rates[0].count = 1; | 
|  | tx_info->control.rates[0].flags = IEEE80211_TX_RC_MCS; | 
|  | tx_info->control.rates[1].idx = -1; | 
|  |  | 
|  | init_completion(&sc->paprd_complete); | 
|  | txctl.paprd = BIT(chain); | 
|  |  | 
|  | if (ath_tx_start(hw, skb, &txctl) != 0) { | 
|  | ath_dbg(common, CALIBRATE, "PAPRD TX failed\n"); | 
|  | dev_kfree_skb_any(skb); | 
|  | return false; | 
|  | } | 
|  |  | 
|  | time_left = wait_for_completion_timeout(&sc->paprd_complete, | 
|  | msecs_to_jiffies(ATH_PAPRD_TIMEOUT)); | 
|  |  | 
|  | if (!time_left) | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "Timeout waiting for paprd training on TX chain %d\n", | 
|  | chain); | 
|  |  | 
|  | return !!time_left; | 
|  | } | 
|  |  | 
|  | void ath_paprd_calibrate(struct work_struct *work) | 
|  | { | 
|  | struct ath_softc *sc = container_of(work, struct ath_softc, paprd_work); | 
|  | struct ieee80211_hw *hw = sc->hw; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ieee80211_hdr *hdr; | 
|  | struct sk_buff *skb = NULL; | 
|  | struct ath9k_hw_cal_data *caldata = ah->caldata; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | int ftype; | 
|  | int chain_ok = 0; | 
|  | int chain; | 
|  | int len = 1800; | 
|  | int ret; | 
|  |  | 
|  | if (!caldata || !caldata->paprd_packet_sent || caldata->paprd_done) | 
|  | return; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  |  | 
|  | if (ar9003_paprd_init_table(ah) < 0) | 
|  | goto fail_paprd; | 
|  |  | 
|  | skb = alloc_skb(len, GFP_KERNEL); | 
|  | if (!skb) | 
|  | goto fail_paprd; | 
|  |  | 
|  | skb_put(skb, len); | 
|  | memset(skb->data, 0, len); | 
|  | hdr = (struct ieee80211_hdr *)skb->data; | 
|  | ftype = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC; | 
|  | hdr->frame_control = cpu_to_le16(ftype); | 
|  | hdr->duration_id = cpu_to_le16(10); | 
|  | memcpy(hdr->addr1, hw->wiphy->perm_addr, ETH_ALEN); | 
|  | memcpy(hdr->addr2, hw->wiphy->perm_addr, ETH_ALEN); | 
|  | memcpy(hdr->addr3, hw->wiphy->perm_addr, ETH_ALEN); | 
|  |  | 
|  | for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) { | 
|  | if (!(ah->txchainmask & BIT(chain))) | 
|  | continue; | 
|  |  | 
|  | chain_ok = 0; | 
|  | ar9003_paprd_setup_gain_table(ah, chain); | 
|  |  | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "Sending PAPRD training frame on chain %d\n", chain); | 
|  | if (!ath_paprd_send_frame(sc, skb, chain)) | 
|  | goto fail_paprd; | 
|  |  | 
|  | if (!ar9003_paprd_is_done(ah)) { | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "PAPRD not yet done on chain %d\n", chain); | 
|  | break; | 
|  | } | 
|  |  | 
|  | ret = ar9003_paprd_create_curve(ah, caldata, chain); | 
|  | if (ret == -EINPROGRESS) { | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "PAPRD curve on chain %d needs to be re-trained\n", | 
|  | chain); | 
|  | break; | 
|  | } else if (ret) { | 
|  | ath_dbg(common, CALIBRATE, | 
|  | "PAPRD create curve failed on chain %d\n", | 
|  | chain); | 
|  | break; | 
|  | } | 
|  |  | 
|  | chain_ok = 1; | 
|  | } | 
|  | kfree_skb(skb); | 
|  |  | 
|  | if (chain_ok) { | 
|  | caldata->paprd_done = true; | 
|  | ath_paprd_activate(sc); | 
|  | } | 
|  |  | 
|  | fail_paprd: | 
|  | ath9k_ps_restore(sc); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *  ANI performs periodic noise floor calibration | 
|  | *  that is used to adjust and optimize the chip performance.  This | 
|  | *  takes environmental changes (location, temperature) into account. | 
|  | *  When the task is complete, it reschedules itself depending on the | 
|  | *  appropriate interval that was calculated. | 
|  | */ | 
|  | void ath_ani_calibrate(unsigned long data) | 
|  | { | 
|  | struct ath_softc *sc = (struct ath_softc *)data; | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | bool longcal = false; | 
|  | bool shortcal = false; | 
|  | bool aniflag = false; | 
|  | unsigned int timestamp = jiffies_to_msecs(jiffies); | 
|  | u32 cal_interval, short_cal_interval, long_cal_interval; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (ah->caldata && ah->caldata->nfcal_interference) | 
|  | long_cal_interval = ATH_LONG_CALINTERVAL_INT; | 
|  | else | 
|  | long_cal_interval = ATH_LONG_CALINTERVAL; | 
|  |  | 
|  | short_cal_interval = (ah->opmode == NL80211_IFTYPE_AP) ? | 
|  | ATH_AP_SHORT_CALINTERVAL : ATH_STA_SHORT_CALINTERVAL; | 
|  |  | 
|  | /* Only calibrate if awake */ | 
|  | if (sc->sc_ah->power_mode != ATH9K_PM_AWAKE) | 
|  | goto set_timer; | 
|  |  | 
|  | ath9k_ps_wakeup(sc); | 
|  |  | 
|  | /* Long calibration runs independently of short calibration. */ | 
|  | if ((timestamp - common->ani.longcal_timer) >= long_cal_interval) { | 
|  | longcal = true; | 
|  | common->ani.longcal_timer = timestamp; | 
|  | } | 
|  |  | 
|  | /* Short calibration applies only while caldone is false */ | 
|  | if (!common->ani.caldone) { | 
|  | if ((timestamp - common->ani.shortcal_timer) >= short_cal_interval) { | 
|  | shortcal = true; | 
|  | common->ani.shortcal_timer = timestamp; | 
|  | common->ani.resetcal_timer = timestamp; | 
|  | } | 
|  | } else { | 
|  | if ((timestamp - common->ani.resetcal_timer) >= | 
|  | ATH_RESTART_CALINTERVAL) { | 
|  | common->ani.caldone = ath9k_hw_reset_calvalid(ah); | 
|  | if (common->ani.caldone) | 
|  | common->ani.resetcal_timer = timestamp; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Verify whether we must check ANI */ | 
|  | if (sc->sc_ah->config.enable_ani | 
|  | && (timestamp - common->ani.checkani_timer) >= | 
|  | ah->config.ani_poll_interval) { | 
|  | aniflag = true; | 
|  | common->ani.checkani_timer = timestamp; | 
|  | } | 
|  |  | 
|  | /* Call ANI routine if necessary */ | 
|  | if (aniflag) { | 
|  | spin_lock_irqsave(&common->cc_lock, flags); | 
|  | ath9k_hw_ani_monitor(ah, ah->curchan); | 
|  | ath_update_survey_stats(sc); | 
|  | spin_unlock_irqrestore(&common->cc_lock, flags); | 
|  | } | 
|  |  | 
|  | /* Perform calibration if necessary */ | 
|  | if (longcal || shortcal) { | 
|  | common->ani.caldone = | 
|  | ath9k_hw_calibrate(ah, ah->curchan, | 
|  | ah->rxchainmask, longcal); | 
|  | } | 
|  |  | 
|  | ath_dbg(common, ANI, | 
|  | "Calibration @%lu finished: %s %s %s, caldone: %s\n", | 
|  | jiffies, | 
|  | longcal ? "long" : "", shortcal ? "short" : "", | 
|  | aniflag ? "ani" : "", common->ani.caldone ? "true" : "false"); | 
|  |  | 
|  | ath9k_debug_samp_bb_mac(sc); | 
|  | ath9k_ps_restore(sc); | 
|  |  | 
|  | set_timer: | 
|  | /* | 
|  | * Set timer interval based on previous results. | 
|  | * The interval must be the shortest necessary to satisfy ANI, | 
|  | * short calibration and long calibration. | 
|  | */ | 
|  | cal_interval = ATH_LONG_CALINTERVAL; | 
|  | if (sc->sc_ah->config.enable_ani) | 
|  | cal_interval = min(cal_interval, | 
|  | (u32)ah->config.ani_poll_interval); | 
|  | if (!common->ani.caldone) | 
|  | cal_interval = min(cal_interval, (u32)short_cal_interval); | 
|  |  | 
|  | mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); | 
|  | if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD) && ah->caldata) { | 
|  | if (!ah->caldata->paprd_done) | 
|  | ieee80211_queue_work(sc->hw, &sc->paprd_work); | 
|  | else if (!ah->paprd_table_write_done) | 
|  | ath_paprd_activate(sc); | 
|  | } | 
|  | } | 
|  |  | 
|  | void ath_start_ani(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | unsigned long timestamp = jiffies_to_msecs(jiffies); | 
|  |  | 
|  | if (common->disable_ani || | 
|  | !test_bit(SC_OP_ANI_RUN, &sc->sc_flags) || | 
|  | (sc->hw->conf.flags & IEEE80211_CONF_OFFCHANNEL)) | 
|  | return; | 
|  |  | 
|  | common->ani.longcal_timer = timestamp; | 
|  | common->ani.shortcal_timer = timestamp; | 
|  | common->ani.checkani_timer = timestamp; | 
|  |  | 
|  | ath_dbg(common, ANI, "Starting ANI\n"); | 
|  | mod_timer(&common->ani.timer, | 
|  | jiffies + msecs_to_jiffies((u32)ah->config.ani_poll_interval)); | 
|  | } | 
|  |  | 
|  | void ath_stop_ani(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_common *common = ath9k_hw_common(sc->sc_ah); | 
|  |  | 
|  | ath_dbg(common, ANI, "Stopping ANI\n"); | 
|  | del_timer_sync(&common->ani.timer); | 
|  | } | 
|  |  | 
|  | void ath_check_ani(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf; | 
|  |  | 
|  | /* | 
|  | * Check for the various conditions in which ANI has to | 
|  | * be stopped. | 
|  | */ | 
|  | if (ah->opmode == NL80211_IFTYPE_ADHOC) { | 
|  | if (!cur_conf->enable_beacon) | 
|  | goto stop_ani; | 
|  | } else if (ah->opmode == NL80211_IFTYPE_AP) { | 
|  | if (!cur_conf->enable_beacon) { | 
|  | /* | 
|  | * Disable ANI only when there are no | 
|  | * associated stations. | 
|  | */ | 
|  | if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) | 
|  | goto stop_ani; | 
|  | } | 
|  | } else if (ah->opmode == NL80211_IFTYPE_STATION) { | 
|  | if (!test_bit(SC_OP_PRIM_STA_VIF, &sc->sc_flags)) | 
|  | goto stop_ani; | 
|  | } | 
|  |  | 
|  | if (!test_bit(SC_OP_ANI_RUN, &sc->sc_flags)) { | 
|  | set_bit(SC_OP_ANI_RUN, &sc->sc_flags); | 
|  | ath_start_ani(sc); | 
|  | } | 
|  |  | 
|  | return; | 
|  |  | 
|  | stop_ani: | 
|  | clear_bit(SC_OP_ANI_RUN, &sc->sc_flags); | 
|  | ath_stop_ani(sc); | 
|  | } | 
|  |  | 
|  | void ath_update_survey_nf(struct ath_softc *sc, int channel) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath9k_channel *chan = &ah->channels[channel]; | 
|  | struct survey_info *survey = &sc->survey[channel]; | 
|  |  | 
|  | if (chan->noisefloor) { | 
|  | survey->filled |= SURVEY_INFO_NOISE_DBM; | 
|  | survey->noise = ath9k_hw_getchan_noise(ah, chan); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Updates the survey statistics and returns the busy time since last | 
|  | * update in %, if the measurement duration was long enough for the | 
|  | * result to be useful, -1 otherwise. | 
|  | */ | 
|  | int ath_update_survey_stats(struct ath_softc *sc) | 
|  | { | 
|  | struct ath_hw *ah = sc->sc_ah; | 
|  | struct ath_common *common = ath9k_hw_common(ah); | 
|  | int pos = ah->curchan - &ah->channels[0]; | 
|  | struct survey_info *survey = &sc->survey[pos]; | 
|  | struct ath_cycle_counters *cc = &common->cc_survey; | 
|  | unsigned int div = common->clockrate * 1000; | 
|  | int ret = 0; | 
|  |  | 
|  | if (!ah->curchan) | 
|  | return -1; | 
|  |  | 
|  | if (ah->power_mode == ATH9K_PM_AWAKE) | 
|  | ath_hw_cycle_counters_update(common); | 
|  |  | 
|  | if (cc->cycles > 0) { | 
|  | survey->filled |= SURVEY_INFO_CHANNEL_TIME | | 
|  | SURVEY_INFO_CHANNEL_TIME_BUSY | | 
|  | SURVEY_INFO_CHANNEL_TIME_RX | | 
|  | SURVEY_INFO_CHANNEL_TIME_TX; | 
|  | survey->channel_time += cc->cycles / div; | 
|  | survey->channel_time_busy += cc->rx_busy / div; | 
|  | survey->channel_time_rx += cc->rx_frame / div; | 
|  | survey->channel_time_tx += cc->tx_frame / div; | 
|  | } | 
|  |  | 
|  | if (cc->cycles < div) | 
|  | return -1; | 
|  |  | 
|  | if (cc->cycles > 0) | 
|  | ret = cc->rx_busy * 100 / cc->cycles; | 
|  |  | 
|  | memset(cc, 0, sizeof(*cc)); | 
|  |  | 
|  | ath_update_survey_nf(sc, pos); | 
|  |  | 
|  | return ret; | 
|  | } |