| /* |
| * Here is where the ball gets rolling as far as the kernel is concerned. |
| * When control is transferred to _start, the bootload has already |
| * loaded us to the correct address. All that's left to do here is |
| * to set up the kernel's global pointer and jump to the kernel |
| * entry point. |
| * |
| * Copyright (C) 1998-2001, 2003, 2005 Hewlett-Packard Co |
| * David Mosberger-Tang <davidm@hpl.hp.com> |
| * Stephane Eranian <eranian@hpl.hp.com> |
| * Copyright (C) 1999 VA Linux Systems |
| * Copyright (C) 1999 Walt Drummond <drummond@valinux.com> |
| * Copyright (C) 1999 Intel Corp. |
| * Copyright (C) 1999 Asit Mallick <Asit.K.Mallick@intel.com> |
| * Copyright (C) 1999 Don Dugger <Don.Dugger@intel.com> |
| * Copyright (C) 2002 Fenghua Yu <fenghua.yu@intel.com> |
| * -Optimize __ia64_save_fpu() and __ia64_load_fpu() for Itanium 2. |
| * Copyright (C) 2004 Ashok Raj <ashok.raj@intel.com> |
| * Support for CPU Hotplug |
| */ |
| |
| |
| #include <asm/asmmacro.h> |
| #include <asm/fpu.h> |
| #include <asm/kregs.h> |
| #include <asm/mmu_context.h> |
| #include <asm/asm-offsets.h> |
| #include <asm/pal.h> |
| #include <asm/paravirt.h> |
| #include <asm/pgtable.h> |
| #include <asm/processor.h> |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <asm/mca_asm.h> |
| #include <linux/init.h> |
| #include <linux/linkage.h> |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| #define SAL_PSR_BITS_TO_SET \ |
| (IA64_PSR_AC | IA64_PSR_BN | IA64_PSR_MFH | IA64_PSR_MFL) |
| |
| #define SAVE_FROM_REG(src, ptr, dest) \ |
| mov dest=src;; \ |
| st8 [ptr]=dest,0x08 |
| |
| #define RESTORE_REG(reg, ptr, _tmp) \ |
| ld8 _tmp=[ptr],0x08;; \ |
| mov reg=_tmp |
| |
| #define SAVE_BREAK_REGS(ptr, _idx, _breg, _dest)\ |
| mov ar.lc=IA64_NUM_DBG_REGS-1;; \ |
| mov _idx=0;; \ |
| 1: \ |
| SAVE_FROM_REG(_breg[_idx], ptr, _dest);; \ |
| add _idx=1,_idx;; \ |
| br.cloop.sptk.many 1b |
| |
| #define RESTORE_BREAK_REGS(ptr, _idx, _breg, _tmp, _lbl)\ |
| mov ar.lc=IA64_NUM_DBG_REGS-1;; \ |
| mov _idx=0;; \ |
| _lbl: RESTORE_REG(_breg[_idx], ptr, _tmp);; \ |
| add _idx=1, _idx;; \ |
| br.cloop.sptk.many _lbl |
| |
| #define SAVE_ONE_RR(num, _reg, _tmp) \ |
| movl _tmp=(num<<61);; \ |
| mov _reg=rr[_tmp] |
| |
| #define SAVE_REGION_REGS(_tmp, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7) \ |
| SAVE_ONE_RR(0,_r0, _tmp);; \ |
| SAVE_ONE_RR(1,_r1, _tmp);; \ |
| SAVE_ONE_RR(2,_r2, _tmp);; \ |
| SAVE_ONE_RR(3,_r3, _tmp);; \ |
| SAVE_ONE_RR(4,_r4, _tmp);; \ |
| SAVE_ONE_RR(5,_r5, _tmp);; \ |
| SAVE_ONE_RR(6,_r6, _tmp);; \ |
| SAVE_ONE_RR(7,_r7, _tmp);; |
| |
| #define STORE_REGION_REGS(ptr, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7) \ |
| st8 [ptr]=_r0, 8;; \ |
| st8 [ptr]=_r1, 8;; \ |
| st8 [ptr]=_r2, 8;; \ |
| st8 [ptr]=_r3, 8;; \ |
| st8 [ptr]=_r4, 8;; \ |
| st8 [ptr]=_r5, 8;; \ |
| st8 [ptr]=_r6, 8;; \ |
| st8 [ptr]=_r7, 8;; |
| |
| #define RESTORE_REGION_REGS(ptr, _idx1, _idx2, _tmp) \ |
| mov ar.lc=0x08-1;; \ |
| movl _idx1=0x00;; \ |
| RestRR: \ |
| dep.z _idx2=_idx1,61,3;; \ |
| ld8 _tmp=[ptr],8;; \ |
| mov rr[_idx2]=_tmp;; \ |
| srlz.d;; \ |
| add _idx1=1,_idx1;; \ |
| br.cloop.sptk.few RestRR |
| |
| #define SET_AREA_FOR_BOOTING_CPU(reg1, reg2) \ |
| movl reg1=sal_state_for_booting_cpu;; \ |
| ld8 reg2=[reg1];; |
| |
| /* |
| * Adjust region registers saved before starting to save |
| * break regs and rest of the states that need to be preserved. |
| */ |
| #define SAL_TO_OS_BOOT_HANDOFF_STATE_SAVE(_reg1,_reg2,_pred) \ |
| SAVE_FROM_REG(b0,_reg1,_reg2);; \ |
| SAVE_FROM_REG(b1,_reg1,_reg2);; \ |
| SAVE_FROM_REG(b2,_reg1,_reg2);; \ |
| SAVE_FROM_REG(b3,_reg1,_reg2);; \ |
| SAVE_FROM_REG(b4,_reg1,_reg2);; \ |
| SAVE_FROM_REG(b5,_reg1,_reg2);; \ |
| st8 [_reg1]=r1,0x08;; \ |
| st8 [_reg1]=r12,0x08;; \ |
| st8 [_reg1]=r13,0x08;; \ |
| SAVE_FROM_REG(ar.fpsr,_reg1,_reg2);; \ |
| SAVE_FROM_REG(ar.pfs,_reg1,_reg2);; \ |
| SAVE_FROM_REG(ar.rnat,_reg1,_reg2);; \ |
| SAVE_FROM_REG(ar.unat,_reg1,_reg2);; \ |
| SAVE_FROM_REG(ar.bspstore,_reg1,_reg2);; \ |
| SAVE_FROM_REG(cr.dcr,_reg1,_reg2);; \ |
| SAVE_FROM_REG(cr.iva,_reg1,_reg2);; \ |
| SAVE_FROM_REG(cr.pta,_reg1,_reg2);; \ |
| SAVE_FROM_REG(cr.itv,_reg1,_reg2);; \ |
| SAVE_FROM_REG(cr.pmv,_reg1,_reg2);; \ |
| SAVE_FROM_REG(cr.cmcv,_reg1,_reg2);; \ |
| SAVE_FROM_REG(cr.lrr0,_reg1,_reg2);; \ |
| SAVE_FROM_REG(cr.lrr1,_reg1,_reg2);; \ |
| st8 [_reg1]=r4,0x08;; \ |
| st8 [_reg1]=r5,0x08;; \ |
| st8 [_reg1]=r6,0x08;; \ |
| st8 [_reg1]=r7,0x08;; \ |
| st8 [_reg1]=_pred,0x08;; \ |
| SAVE_FROM_REG(ar.lc, _reg1, _reg2);; \ |
| stf.spill.nta [_reg1]=f2,16;; \ |
| stf.spill.nta [_reg1]=f3,16;; \ |
| stf.spill.nta [_reg1]=f4,16;; \ |
| stf.spill.nta [_reg1]=f5,16;; \ |
| stf.spill.nta [_reg1]=f16,16;; \ |
| stf.spill.nta [_reg1]=f17,16;; \ |
| stf.spill.nta [_reg1]=f18,16;; \ |
| stf.spill.nta [_reg1]=f19,16;; \ |
| stf.spill.nta [_reg1]=f20,16;; \ |
| stf.spill.nta [_reg1]=f21,16;; \ |
| stf.spill.nta [_reg1]=f22,16;; \ |
| stf.spill.nta [_reg1]=f23,16;; \ |
| stf.spill.nta [_reg1]=f24,16;; \ |
| stf.spill.nta [_reg1]=f25,16;; \ |
| stf.spill.nta [_reg1]=f26,16;; \ |
| stf.spill.nta [_reg1]=f27,16;; \ |
| stf.spill.nta [_reg1]=f28,16;; \ |
| stf.spill.nta [_reg1]=f29,16;; \ |
| stf.spill.nta [_reg1]=f30,16;; \ |
| stf.spill.nta [_reg1]=f31,16;; |
| |
| #else |
| #define SET_AREA_FOR_BOOTING_CPU(a1, a2) |
| #define SAL_TO_OS_BOOT_HANDOFF_STATE_SAVE(a1,a2, a3) |
| #define SAVE_REGION_REGS(_tmp, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7) |
| #define STORE_REGION_REGS(ptr, _r0, _r1, _r2, _r3, _r4, _r5, _r6, _r7) |
| #endif |
| |
| #define SET_ONE_RR(num, pgsize, _tmp1, _tmp2, vhpt) \ |
| movl _tmp1=(num << 61);; \ |
| mov _tmp2=((ia64_rid(IA64_REGION_ID_KERNEL, (num<<61)) << 8) | (pgsize << 2) | vhpt);; \ |
| mov rr[_tmp1]=_tmp2 |
| |
| __PAGE_ALIGNED_DATA |
| |
| .global empty_zero_page |
| empty_zero_page: |
| .skip PAGE_SIZE |
| |
| .global swapper_pg_dir |
| swapper_pg_dir: |
| .skip PAGE_SIZE |
| |
| .rodata |
| halt_msg: |
| stringz "Halting kernel\n" |
| |
| __REF |
| |
| .global start_ap |
| |
| /* |
| * Start the kernel. When the bootloader passes control to _start(), r28 |
| * points to the address of the boot parameter area. Execution reaches |
| * here in physical mode. |
| */ |
| GLOBAL_ENTRY(_start) |
| start_ap: |
| .prologue |
| .save rp, r0 // terminate unwind chain with a NULL rp |
| .body |
| |
| rsm psr.i | psr.ic |
| ;; |
| srlz.i |
| ;; |
| { |
| flushrs // must be first insn in group |
| srlz.i |
| } |
| ;; |
| /* |
| * Save the region registers, predicate before they get clobbered |
| */ |
| SAVE_REGION_REGS(r2, r8,r9,r10,r11,r12,r13,r14,r15); |
| mov r25=pr;; |
| |
| /* |
| * Initialize kernel region registers: |
| * rr[0]: VHPT enabled, page size = PAGE_SHIFT |
| * rr[1]: VHPT enabled, page size = PAGE_SHIFT |
| * rr[2]: VHPT enabled, page size = PAGE_SHIFT |
| * rr[3]: VHPT enabled, page size = PAGE_SHIFT |
| * rr[4]: VHPT enabled, page size = PAGE_SHIFT |
| * rr[5]: VHPT enabled, page size = PAGE_SHIFT |
| * rr[6]: VHPT disabled, page size = IA64_GRANULE_SHIFT |
| * rr[7]: VHPT disabled, page size = IA64_GRANULE_SHIFT |
| * We initialize all of them to prevent inadvertently assuming |
| * something about the state of address translation early in boot. |
| */ |
| SET_ONE_RR(0, PAGE_SHIFT, r2, r16, 1);; |
| SET_ONE_RR(1, PAGE_SHIFT, r2, r16, 1);; |
| SET_ONE_RR(2, PAGE_SHIFT, r2, r16, 1);; |
| SET_ONE_RR(3, PAGE_SHIFT, r2, r16, 1);; |
| SET_ONE_RR(4, PAGE_SHIFT, r2, r16, 1);; |
| SET_ONE_RR(5, PAGE_SHIFT, r2, r16, 1);; |
| SET_ONE_RR(6, IA64_GRANULE_SHIFT, r2, r16, 0);; |
| SET_ONE_RR(7, IA64_GRANULE_SHIFT, r2, r16, 0);; |
| /* |
| * Now pin mappings into the TLB for kernel text and data |
| */ |
| mov r18=KERNEL_TR_PAGE_SHIFT<<2 |
| movl r17=KERNEL_START |
| ;; |
| mov cr.itir=r18 |
| mov cr.ifa=r17 |
| mov r16=IA64_TR_KERNEL |
| mov r3=ip |
| movl r18=PAGE_KERNEL |
| ;; |
| dep r2=0,r3,0,KERNEL_TR_PAGE_SHIFT |
| ;; |
| or r18=r2,r18 |
| ;; |
| srlz.i |
| ;; |
| itr.i itr[r16]=r18 |
| ;; |
| itr.d dtr[r16]=r18 |
| ;; |
| srlz.i |
| |
| /* |
| * Switch into virtual mode: |
| */ |
| movl r16=(IA64_PSR_IT|IA64_PSR_IC|IA64_PSR_DT|IA64_PSR_RT|IA64_PSR_DFH|IA64_PSR_BN \ |
| |IA64_PSR_DI|IA64_PSR_AC) |
| ;; |
| mov cr.ipsr=r16 |
| movl r17=1f |
| ;; |
| mov cr.iip=r17 |
| mov cr.ifs=r0 |
| ;; |
| rfi |
| ;; |
| 1: // now we are in virtual mode |
| |
| SET_AREA_FOR_BOOTING_CPU(r2, r16); |
| |
| STORE_REGION_REGS(r16, r8,r9,r10,r11,r12,r13,r14,r15); |
| SAL_TO_OS_BOOT_HANDOFF_STATE_SAVE(r16,r17,r25) |
| ;; |
| |
| // set IVT entry point---can't access I/O ports without it |
| movl r3=ia64_ivt |
| ;; |
| mov cr.iva=r3 |
| movl r2=FPSR_DEFAULT |
| ;; |
| srlz.i |
| movl gp=__gp |
| |
| mov ar.fpsr=r2 |
| ;; |
| |
| #define isAP p2 // are we an Application Processor? |
| #define isBP p3 // are we the Bootstrap Processor? |
| |
| #ifdef CONFIG_SMP |
| /* |
| * Find the init_task for the currently booting CPU. At poweron, and in |
| * UP mode, task_for_booting_cpu is NULL. |
| */ |
| movl r3=task_for_booting_cpu |
| ;; |
| ld8 r3=[r3] |
| movl r2=init_task |
| ;; |
| cmp.eq isBP,isAP=r3,r0 |
| ;; |
| (isAP) mov r2=r3 |
| #else |
| movl r2=init_task |
| cmp.eq isBP,isAP=r0,r0 |
| #endif |
| ;; |
| tpa r3=r2 // r3 == phys addr of task struct |
| mov r16=-1 |
| (isBP) br.cond.dpnt .load_current // BP stack is on region 5 --- no need to map it |
| |
| // load mapping for stack (virtaddr in r2, physaddr in r3) |
| rsm psr.ic |
| movl r17=PAGE_KERNEL |
| ;; |
| srlz.d |
| dep r18=0,r3,0,12 |
| ;; |
| or r18=r17,r18 |
| dep r2=-1,r3,61,3 // IMVA of task |
| ;; |
| mov r17=rr[r2] |
| shr.u r16=r3,IA64_GRANULE_SHIFT |
| ;; |
| dep r17=0,r17,8,24 |
| ;; |
| mov cr.itir=r17 |
| mov cr.ifa=r2 |
| |
| mov r19=IA64_TR_CURRENT_STACK |
| ;; |
| itr.d dtr[r19]=r18 |
| ;; |
| ssm psr.ic |
| srlz.d |
| ;; |
| |
| .load_current: |
| // load the "current" pointer (r13) and ar.k6 with the current task |
| mov IA64_KR(CURRENT)=r2 // virtual address |
| mov IA64_KR(CURRENT_STACK)=r16 |
| mov r13=r2 |
| /* |
| * Reserve space at the top of the stack for "struct pt_regs". Kernel |
| * threads don't store interesting values in that structure, but the space |
| * still needs to be there because time-critical stuff such as the context |
| * switching can be implemented more efficiently (for example, __switch_to() |
| * always sets the psr.dfh bit of the task it is switching to). |
| */ |
| |
| addl r12=IA64_STK_OFFSET-IA64_PT_REGS_SIZE-16,r2 |
| addl r2=IA64_RBS_OFFSET,r2 // initialize the RSE |
| mov ar.rsc=0 // place RSE in enforced lazy mode |
| ;; |
| loadrs // clear the dirty partition |
| movl r19=__phys_per_cpu_start |
| mov r18=PERCPU_PAGE_SIZE |
| ;; |
| #ifndef CONFIG_SMP |
| add r19=r19,r18 |
| ;; |
| #else |
| (isAP) br.few 2f |
| movl r20=__cpu0_per_cpu |
| ;; |
| shr.u r18=r18,3 |
| 1: |
| ld8 r21=[r19],8;; |
| st8[r20]=r21,8 |
| adds r18=-1,r18;; |
| cmp4.lt p7,p6=0,r18 |
| (p7) br.cond.dptk.few 1b |
| mov r19=r20 |
| ;; |
| 2: |
| #endif |
| tpa r19=r19 |
| ;; |
| .pred.rel.mutex isBP,isAP |
| (isBP) mov IA64_KR(PER_CPU_DATA)=r19 // per-CPU base for cpu0 |
| (isAP) mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base |
| ;; |
| mov ar.bspstore=r2 // establish the new RSE stack |
| ;; |
| mov ar.rsc=0x3 // place RSE in eager mode |
| |
| (isBP) dep r28=-1,r28,61,3 // make address virtual |
| (isBP) movl r2=ia64_boot_param |
| ;; |
| (isBP) st8 [r2]=r28 // save the address of the boot param area passed by the bootloader |
| |
| #ifdef CONFIG_PARAVIRT |
| |
| movl r14=hypervisor_setup_hooks |
| movl r15=hypervisor_type |
| mov r16=num_hypervisor_hooks |
| ;; |
| ld8 r2=[r15] |
| ;; |
| cmp.ltu p7,p0=r2,r16 // array size check |
| shladd r8=r2,3,r14 |
| ;; |
| (p7) ld8 r9=[r8] |
| ;; |
| (p7) mov b1=r9 |
| (p7) cmp.ne.unc p7,p0=r9,r0 // no actual branch to NULL |
| ;; |
| (p7) br.call.sptk.many rp=b1 |
| |
| __INITDATA |
| |
| default_setup_hook = 0 // Currently nothing needs to be done. |
| |
| .weak xen_setup_hook |
| |
| .global hypervisor_type |
| hypervisor_type: |
| data8 PARAVIRT_HYPERVISOR_TYPE_DEFAULT |
| |
| // must have the same order with PARAVIRT_HYPERVISOR_TYPE_xxx |
| |
| hypervisor_setup_hooks: |
| data8 default_setup_hook |
| data8 xen_setup_hook |
| num_hypervisor_hooks = (. - hypervisor_setup_hooks) / 8 |
| .previous |
| |
| #endif |
| |
| #ifdef CONFIG_SMP |
| (isAP) br.call.sptk.many rp=start_secondary |
| .ret0: |
| (isAP) br.cond.sptk self |
| #endif |
| |
| // This is executed by the bootstrap processor (bsp) only: |
| |
| #ifdef CONFIG_IA64_FW_EMU |
| // initialize PAL & SAL emulator: |
| br.call.sptk.many rp=sys_fw_init |
| .ret1: |
| #endif |
| br.call.sptk.many rp=start_kernel |
| .ret2: addl r3=@ltoff(halt_msg),gp |
| ;; |
| alloc r2=ar.pfs,8,0,2,0 |
| ;; |
| ld8 out0=[r3] |
| br.call.sptk.many b0=console_print |
| |
| self: hint @pause |
| br.sptk.many self // endless loop |
| END(_start) |
| |
| .text |
| |
| GLOBAL_ENTRY(ia64_save_debug_regs) |
| alloc r16=ar.pfs,1,0,0,0 |
| mov r20=ar.lc // preserve ar.lc |
| mov ar.lc=IA64_NUM_DBG_REGS-1 |
| mov r18=0 |
| add r19=IA64_NUM_DBG_REGS*8,in0 |
| ;; |
| 1: mov r16=dbr[r18] |
| #ifdef CONFIG_ITANIUM |
| ;; |
| srlz.d |
| #endif |
| mov r17=ibr[r18] |
| add r18=1,r18 |
| ;; |
| st8.nta [in0]=r16,8 |
| st8.nta [r19]=r17,8 |
| br.cloop.sptk.many 1b |
| ;; |
| mov ar.lc=r20 // restore ar.lc |
| br.ret.sptk.many rp |
| END(ia64_save_debug_regs) |
| |
| GLOBAL_ENTRY(ia64_load_debug_regs) |
| alloc r16=ar.pfs,1,0,0,0 |
| lfetch.nta [in0] |
| mov r20=ar.lc // preserve ar.lc |
| add r19=IA64_NUM_DBG_REGS*8,in0 |
| mov ar.lc=IA64_NUM_DBG_REGS-1 |
| mov r18=-1 |
| ;; |
| 1: ld8.nta r16=[in0],8 |
| ld8.nta r17=[r19],8 |
| add r18=1,r18 |
| ;; |
| mov dbr[r18]=r16 |
| #ifdef CONFIG_ITANIUM |
| ;; |
| srlz.d // Errata 132 (NoFix status) |
| #endif |
| mov ibr[r18]=r17 |
| br.cloop.sptk.many 1b |
| ;; |
| mov ar.lc=r20 // restore ar.lc |
| br.ret.sptk.many rp |
| END(ia64_load_debug_regs) |
| |
| GLOBAL_ENTRY(__ia64_save_fpu) |
| alloc r2=ar.pfs,1,4,0,0 |
| adds loc0=96*16-16,in0 |
| adds loc1=96*16-16-128,in0 |
| ;; |
| stf.spill.nta [loc0]=f127,-256 |
| stf.spill.nta [loc1]=f119,-256 |
| ;; |
| stf.spill.nta [loc0]=f111,-256 |
| stf.spill.nta [loc1]=f103,-256 |
| ;; |
| stf.spill.nta [loc0]=f95,-256 |
| stf.spill.nta [loc1]=f87,-256 |
| ;; |
| stf.spill.nta [loc0]=f79,-256 |
| stf.spill.nta [loc1]=f71,-256 |
| ;; |
| stf.spill.nta [loc0]=f63,-256 |
| stf.spill.nta [loc1]=f55,-256 |
| adds loc2=96*16-32,in0 |
| ;; |
| stf.spill.nta [loc0]=f47,-256 |
| stf.spill.nta [loc1]=f39,-256 |
| adds loc3=96*16-32-128,in0 |
| ;; |
| stf.spill.nta [loc2]=f126,-256 |
| stf.spill.nta [loc3]=f118,-256 |
| ;; |
| stf.spill.nta [loc2]=f110,-256 |
| stf.spill.nta [loc3]=f102,-256 |
| ;; |
| stf.spill.nta [loc2]=f94,-256 |
| stf.spill.nta [loc3]=f86,-256 |
| ;; |
| stf.spill.nta [loc2]=f78,-256 |
| stf.spill.nta [loc3]=f70,-256 |
| ;; |
| stf.spill.nta [loc2]=f62,-256 |
| stf.spill.nta [loc3]=f54,-256 |
| adds loc0=96*16-48,in0 |
| ;; |
| stf.spill.nta [loc2]=f46,-256 |
| stf.spill.nta [loc3]=f38,-256 |
| adds loc1=96*16-48-128,in0 |
| ;; |
| stf.spill.nta [loc0]=f125,-256 |
| stf.spill.nta [loc1]=f117,-256 |
| ;; |
| stf.spill.nta [loc0]=f109,-256 |
| stf.spill.nta [loc1]=f101,-256 |
| ;; |
| stf.spill.nta [loc0]=f93,-256 |
| stf.spill.nta [loc1]=f85,-256 |
| ;; |
| stf.spill.nta [loc0]=f77,-256 |
| stf.spill.nta [loc1]=f69,-256 |
| ;; |
| stf.spill.nta [loc0]=f61,-256 |
| stf.spill.nta [loc1]=f53,-256 |
| adds loc2=96*16-64,in0 |
| ;; |
| stf.spill.nta [loc0]=f45,-256 |
| stf.spill.nta [loc1]=f37,-256 |
| adds loc3=96*16-64-128,in0 |
| ;; |
| stf.spill.nta [loc2]=f124,-256 |
| stf.spill.nta [loc3]=f116,-256 |
| ;; |
| stf.spill.nta [loc2]=f108,-256 |
| stf.spill.nta [loc3]=f100,-256 |
| ;; |
| stf.spill.nta [loc2]=f92,-256 |
| stf.spill.nta [loc3]=f84,-256 |
| ;; |
| stf.spill.nta [loc2]=f76,-256 |
| stf.spill.nta [loc3]=f68,-256 |
| ;; |
| stf.spill.nta [loc2]=f60,-256 |
| stf.spill.nta [loc3]=f52,-256 |
| adds loc0=96*16-80,in0 |
| ;; |
| stf.spill.nta [loc2]=f44,-256 |
| stf.spill.nta [loc3]=f36,-256 |
| adds loc1=96*16-80-128,in0 |
| ;; |
| stf.spill.nta [loc0]=f123,-256 |
| stf.spill.nta [loc1]=f115,-256 |
| ;; |
| stf.spill.nta [loc0]=f107,-256 |
| stf.spill.nta [loc1]=f99,-256 |
| ;; |
| stf.spill.nta [loc0]=f91,-256 |
| stf.spill.nta [loc1]=f83,-256 |
| ;; |
| stf.spill.nta [loc0]=f75,-256 |
| stf.spill.nta [loc1]=f67,-256 |
| ;; |
| stf.spill.nta [loc0]=f59,-256 |
| stf.spill.nta [loc1]=f51,-256 |
| adds loc2=96*16-96,in0 |
| ;; |
| stf.spill.nta [loc0]=f43,-256 |
| stf.spill.nta [loc1]=f35,-256 |
| adds loc3=96*16-96-128,in0 |
| ;; |
| stf.spill.nta [loc2]=f122,-256 |
| stf.spill.nta [loc3]=f114,-256 |
| ;; |
| stf.spill.nta [loc2]=f106,-256 |
| stf.spill.nta [loc3]=f98,-256 |
| ;; |
| stf.spill.nta [loc2]=f90,-256 |
| stf.spill.nta [loc3]=f82,-256 |
| ;; |
| stf.spill.nta [loc2]=f74,-256 |
| stf.spill.nta [loc3]=f66,-256 |
| ;; |
| stf.spill.nta [loc2]=f58,-256 |
| stf.spill.nta [loc3]=f50,-256 |
| adds loc0=96*16-112,in0 |
| ;; |
| stf.spill.nta [loc2]=f42,-256 |
| stf.spill.nta [loc3]=f34,-256 |
| adds loc1=96*16-112-128,in0 |
| ;; |
| stf.spill.nta [loc0]=f121,-256 |
| stf.spill.nta [loc1]=f113,-256 |
| ;; |
| stf.spill.nta [loc0]=f105,-256 |
| stf.spill.nta [loc1]=f97,-256 |
| ;; |
| stf.spill.nta [loc0]=f89,-256 |
| stf.spill.nta [loc1]=f81,-256 |
| ;; |
| stf.spill.nta [loc0]=f73,-256 |
| stf.spill.nta [loc1]=f65,-256 |
| ;; |
| stf.spill.nta [loc0]=f57,-256 |
| stf.spill.nta [loc1]=f49,-256 |
| adds loc2=96*16-128,in0 |
| ;; |
| stf.spill.nta [loc0]=f41,-256 |
| stf.spill.nta [loc1]=f33,-256 |
| adds loc3=96*16-128-128,in0 |
| ;; |
| stf.spill.nta [loc2]=f120,-256 |
| stf.spill.nta [loc3]=f112,-256 |
| ;; |
| stf.spill.nta [loc2]=f104,-256 |
| stf.spill.nta [loc3]=f96,-256 |
| ;; |
| stf.spill.nta [loc2]=f88,-256 |
| stf.spill.nta [loc3]=f80,-256 |
| ;; |
| stf.spill.nta [loc2]=f72,-256 |
| stf.spill.nta [loc3]=f64,-256 |
| ;; |
| stf.spill.nta [loc2]=f56,-256 |
| stf.spill.nta [loc3]=f48,-256 |
| ;; |
| stf.spill.nta [loc2]=f40 |
| stf.spill.nta [loc3]=f32 |
| br.ret.sptk.many rp |
| END(__ia64_save_fpu) |
| |
| GLOBAL_ENTRY(__ia64_load_fpu) |
| alloc r2=ar.pfs,1,2,0,0 |
| adds r3=128,in0 |
| adds r14=256,in0 |
| adds r15=384,in0 |
| mov loc0=512 |
| mov loc1=-1024+16 |
| ;; |
| ldf.fill.nta f32=[in0],loc0 |
| ldf.fill.nta f40=[ r3],loc0 |
| ldf.fill.nta f48=[r14],loc0 |
| ldf.fill.nta f56=[r15],loc0 |
| ;; |
| ldf.fill.nta f64=[in0],loc0 |
| ldf.fill.nta f72=[ r3],loc0 |
| ldf.fill.nta f80=[r14],loc0 |
| ldf.fill.nta f88=[r15],loc0 |
| ;; |
| ldf.fill.nta f96=[in0],loc1 |
| ldf.fill.nta f104=[ r3],loc1 |
| ldf.fill.nta f112=[r14],loc1 |
| ldf.fill.nta f120=[r15],loc1 |
| ;; |
| ldf.fill.nta f33=[in0],loc0 |
| ldf.fill.nta f41=[ r3],loc0 |
| ldf.fill.nta f49=[r14],loc0 |
| ldf.fill.nta f57=[r15],loc0 |
| ;; |
| ldf.fill.nta f65=[in0],loc0 |
| ldf.fill.nta f73=[ r3],loc0 |
| ldf.fill.nta f81=[r14],loc0 |
| ldf.fill.nta f89=[r15],loc0 |
| ;; |
| ldf.fill.nta f97=[in0],loc1 |
| ldf.fill.nta f105=[ r3],loc1 |
| ldf.fill.nta f113=[r14],loc1 |
| ldf.fill.nta f121=[r15],loc1 |
| ;; |
| ldf.fill.nta f34=[in0],loc0 |
| ldf.fill.nta f42=[ r3],loc0 |
| ldf.fill.nta f50=[r14],loc0 |
| ldf.fill.nta f58=[r15],loc0 |
| ;; |
| ldf.fill.nta f66=[in0],loc0 |
| ldf.fill.nta f74=[ r3],loc0 |
| ldf.fill.nta f82=[r14],loc0 |
| ldf.fill.nta f90=[r15],loc0 |
| ;; |
| ldf.fill.nta f98=[in0],loc1 |
| ldf.fill.nta f106=[ r3],loc1 |
| ldf.fill.nta f114=[r14],loc1 |
| ldf.fill.nta f122=[r15],loc1 |
| ;; |
| ldf.fill.nta f35=[in0],loc0 |
| ldf.fill.nta f43=[ r3],loc0 |
| ldf.fill.nta f51=[r14],loc0 |
| ldf.fill.nta f59=[r15],loc0 |
| ;; |
| ldf.fill.nta f67=[in0],loc0 |
| ldf.fill.nta f75=[ r3],loc0 |
| ldf.fill.nta f83=[r14],loc0 |
| ldf.fill.nta f91=[r15],loc0 |
| ;; |
| ldf.fill.nta f99=[in0],loc1 |
| ldf.fill.nta f107=[ r3],loc1 |
| ldf.fill.nta f115=[r14],loc1 |
| ldf.fill.nta f123=[r15],loc1 |
| ;; |
| ldf.fill.nta f36=[in0],loc0 |
| ldf.fill.nta f44=[ r3],loc0 |
| ldf.fill.nta f52=[r14],loc0 |
| ldf.fill.nta f60=[r15],loc0 |
| ;; |
| ldf.fill.nta f68=[in0],loc0 |
| ldf.fill.nta f76=[ r3],loc0 |
| ldf.fill.nta f84=[r14],loc0 |
| ldf.fill.nta f92=[r15],loc0 |
| ;; |
| ldf.fill.nta f100=[in0],loc1 |
| ldf.fill.nta f108=[ r3],loc1 |
| ldf.fill.nta f116=[r14],loc1 |
| ldf.fill.nta f124=[r15],loc1 |
| ;; |
| ldf.fill.nta f37=[in0],loc0 |
| ldf.fill.nta f45=[ r3],loc0 |
| ldf.fill.nta f53=[r14],loc0 |
| ldf.fill.nta f61=[r15],loc0 |
| ;; |
| ldf.fill.nta f69=[in0],loc0 |
| ldf.fill.nta f77=[ r3],loc0 |
| ldf.fill.nta f85=[r14],loc0 |
| ldf.fill.nta f93=[r15],loc0 |
| ;; |
| ldf.fill.nta f101=[in0],loc1 |
| ldf.fill.nta f109=[ r3],loc1 |
| ldf.fill.nta f117=[r14],loc1 |
| ldf.fill.nta f125=[r15],loc1 |
| ;; |
| ldf.fill.nta f38 =[in0],loc0 |
| ldf.fill.nta f46 =[ r3],loc0 |
| ldf.fill.nta f54 =[r14],loc0 |
| ldf.fill.nta f62 =[r15],loc0 |
| ;; |
| ldf.fill.nta f70 =[in0],loc0 |
| ldf.fill.nta f78 =[ r3],loc0 |
| ldf.fill.nta f86 =[r14],loc0 |
| ldf.fill.nta f94 =[r15],loc0 |
| ;; |
| ldf.fill.nta f102=[in0],loc1 |
| ldf.fill.nta f110=[ r3],loc1 |
| ldf.fill.nta f118=[r14],loc1 |
| ldf.fill.nta f126=[r15],loc1 |
| ;; |
| ldf.fill.nta f39 =[in0],loc0 |
| ldf.fill.nta f47 =[ r3],loc0 |
| ldf.fill.nta f55 =[r14],loc0 |
| ldf.fill.nta f63 =[r15],loc0 |
| ;; |
| ldf.fill.nta f71 =[in0],loc0 |
| ldf.fill.nta f79 =[ r3],loc0 |
| ldf.fill.nta f87 =[r14],loc0 |
| ldf.fill.nta f95 =[r15],loc0 |
| ;; |
| ldf.fill.nta f103=[in0] |
| ldf.fill.nta f111=[ r3] |
| ldf.fill.nta f119=[r14] |
| ldf.fill.nta f127=[r15] |
| br.ret.sptk.many rp |
| END(__ia64_load_fpu) |
| |
| GLOBAL_ENTRY(__ia64_init_fpu) |
| stf.spill [sp]=f0 // M3 |
| mov f32=f0 // F |
| nop.b 0 |
| |
| ldfps f33,f34=[sp] // M0 |
| ldfps f35,f36=[sp] // M1 |
| mov f37=f0 // F |
| ;; |
| |
| setf.s f38=r0 // M2 |
| setf.s f39=r0 // M3 |
| mov f40=f0 // F |
| |
| ldfps f41,f42=[sp] // M0 |
| ldfps f43,f44=[sp] // M1 |
| mov f45=f0 // F |
| |
| setf.s f46=r0 // M2 |
| setf.s f47=r0 // M3 |
| mov f48=f0 // F |
| |
| ldfps f49,f50=[sp] // M0 |
| ldfps f51,f52=[sp] // M1 |
| mov f53=f0 // F |
| |
| setf.s f54=r0 // M2 |
| setf.s f55=r0 // M3 |
| mov f56=f0 // F |
| |
| ldfps f57,f58=[sp] // M0 |
| ldfps f59,f60=[sp] // M1 |
| mov f61=f0 // F |
| |
| setf.s f62=r0 // M2 |
| setf.s f63=r0 // M3 |
| mov f64=f0 // F |
| |
| ldfps f65,f66=[sp] // M0 |
| ldfps f67,f68=[sp] // M1 |
| mov f69=f0 // F |
| |
| setf.s f70=r0 // M2 |
| setf.s f71=r0 // M3 |
| mov f72=f0 // F |
| |
| ldfps f73,f74=[sp] // M0 |
| ldfps f75,f76=[sp] // M1 |
| mov f77=f0 // F |
| |
| setf.s f78=r0 // M2 |
| setf.s f79=r0 // M3 |
| mov f80=f0 // F |
| |
| ldfps f81,f82=[sp] // M0 |
| ldfps f83,f84=[sp] // M1 |
| mov f85=f0 // F |
| |
| setf.s f86=r0 // M2 |
| setf.s f87=r0 // M3 |
| mov f88=f0 // F |
| |
| /* |
| * When the instructions are cached, it would be faster to initialize |
| * the remaining registers with simply mov instructions (F-unit). |
| * This gets the time down to ~29 cycles. However, this would use up |
| * 33 bundles, whereas continuing with the above pattern yields |
| * 10 bundles and ~30 cycles. |
| */ |
| |
| ldfps f89,f90=[sp] // M0 |
| ldfps f91,f92=[sp] // M1 |
| mov f93=f0 // F |
| |
| setf.s f94=r0 // M2 |
| setf.s f95=r0 // M3 |
| mov f96=f0 // F |
| |
| ldfps f97,f98=[sp] // M0 |
| ldfps f99,f100=[sp] // M1 |
| mov f101=f0 // F |
| |
| setf.s f102=r0 // M2 |
| setf.s f103=r0 // M3 |
| mov f104=f0 // F |
| |
| ldfps f105,f106=[sp] // M0 |
| ldfps f107,f108=[sp] // M1 |
| mov f109=f0 // F |
| |
| setf.s f110=r0 // M2 |
| setf.s f111=r0 // M3 |
| mov f112=f0 // F |
| |
| ldfps f113,f114=[sp] // M0 |
| ldfps f115,f116=[sp] // M1 |
| mov f117=f0 // F |
| |
| setf.s f118=r0 // M2 |
| setf.s f119=r0 // M3 |
| mov f120=f0 // F |
| |
| ldfps f121,f122=[sp] // M0 |
| ldfps f123,f124=[sp] // M1 |
| mov f125=f0 // F |
| |
| setf.s f126=r0 // M2 |
| setf.s f127=r0 // M3 |
| br.ret.sptk.many rp // F |
| END(__ia64_init_fpu) |
| |
| /* |
| * Switch execution mode from virtual to physical |
| * |
| * Inputs: |
| * r16 = new psr to establish |
| * Output: |
| * r19 = old virtual address of ar.bsp |
| * r20 = old virtual address of sp |
| * |
| * Note: RSE must already be in enforced lazy mode |
| */ |
| GLOBAL_ENTRY(ia64_switch_mode_phys) |
| { |
| rsm psr.i | psr.ic // disable interrupts and interrupt collection |
| mov r15=ip |
| } |
| ;; |
| { |
| flushrs // must be first insn in group |
| srlz.i |
| } |
| ;; |
| mov cr.ipsr=r16 // set new PSR |
| add r3=1f-ia64_switch_mode_phys,r15 |
| |
| mov r19=ar.bsp |
| mov r20=sp |
| mov r14=rp // get return address into a general register |
| ;; |
| |
| // going to physical mode, use tpa to translate virt->phys |
| tpa r17=r19 |
| tpa r3=r3 |
| tpa sp=sp |
| tpa r14=r14 |
| ;; |
| |
| mov r18=ar.rnat // save ar.rnat |
| mov ar.bspstore=r17 // this steps on ar.rnat |
| mov cr.iip=r3 |
| mov cr.ifs=r0 |
| ;; |
| mov ar.rnat=r18 // restore ar.rnat |
| rfi // must be last insn in group |
| ;; |
| 1: mov rp=r14 |
| br.ret.sptk.many rp |
| END(ia64_switch_mode_phys) |
| |
| /* |
| * Switch execution mode from physical to virtual |
| * |
| * Inputs: |
| * r16 = new psr to establish |
| * r19 = new bspstore to establish |
| * r20 = new sp to establish |
| * |
| * Note: RSE must already be in enforced lazy mode |
| */ |
| GLOBAL_ENTRY(ia64_switch_mode_virt) |
| { |
| rsm psr.i | psr.ic // disable interrupts and interrupt collection |
| mov r15=ip |
| } |
| ;; |
| { |
| flushrs // must be first insn in group |
| srlz.i |
| } |
| ;; |
| mov cr.ipsr=r16 // set new PSR |
| add r3=1f-ia64_switch_mode_virt,r15 |
| |
| mov r14=rp // get return address into a general register |
| ;; |
| |
| // going to virtual |
| // - for code addresses, set upper bits of addr to KERNEL_START |
| // - for stack addresses, copy from input argument |
| movl r18=KERNEL_START |
| dep r3=0,r3,KERNEL_TR_PAGE_SHIFT,64-KERNEL_TR_PAGE_SHIFT |
| dep r14=0,r14,KERNEL_TR_PAGE_SHIFT,64-KERNEL_TR_PAGE_SHIFT |
| mov sp=r20 |
| ;; |
| or r3=r3,r18 |
| or r14=r14,r18 |
| ;; |
| |
| mov r18=ar.rnat // save ar.rnat |
| mov ar.bspstore=r19 // this steps on ar.rnat |
| mov cr.iip=r3 |
| mov cr.ifs=r0 |
| ;; |
| mov ar.rnat=r18 // restore ar.rnat |
| rfi // must be last insn in group |
| ;; |
| 1: mov rp=r14 |
| br.ret.sptk.many rp |
| END(ia64_switch_mode_virt) |
| |
| GLOBAL_ENTRY(ia64_delay_loop) |
| .prologue |
| { nop 0 // work around GAS unwind info generation bug... |
| .save ar.lc,r2 |
| mov r2=ar.lc |
| .body |
| ;; |
| mov ar.lc=r32 |
| } |
| ;; |
| // force loop to be 32-byte aligned (GAS bug means we cannot use .align |
| // inside function body without corrupting unwind info). |
| { nop 0 } |
| 1: br.cloop.sptk.few 1b |
| ;; |
| mov ar.lc=r2 |
| br.ret.sptk.many rp |
| END(ia64_delay_loop) |
| |
| /* |
| * Return a CPU-local timestamp in nano-seconds. This timestamp is |
| * NOT synchronized across CPUs its return value must never be |
| * compared against the values returned on another CPU. The usage in |
| * kernel/sched.c ensures that. |
| * |
| * The return-value of sched_clock() is NOT supposed to wrap-around. |
| * If it did, it would cause some scheduling hiccups (at the worst). |
| * Fortunately, with a 64-bit cycle-counter ticking at 100GHz, even |
| * that would happen only once every 5+ years. |
| * |
| * The code below basically calculates: |
| * |
| * (ia64_get_itc() * local_cpu_data->nsec_per_cyc) >> IA64_NSEC_PER_CYC_SHIFT |
| * |
| * except that the multiplication and the shift are done with 128-bit |
| * intermediate precision so that we can produce a full 64-bit result. |
| */ |
| GLOBAL_ENTRY(ia64_native_sched_clock) |
| addl r8=THIS_CPU(ia64_cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0 |
| mov.m r9=ar.itc // fetch cycle-counter (35 cyc) |
| ;; |
| ldf8 f8=[r8] |
| ;; |
| setf.sig f9=r9 // certain to stall, so issue it _after_ ldf8... |
| ;; |
| xmpy.lu f10=f9,f8 // calculate low 64 bits of 128-bit product (4 cyc) |
| xmpy.hu f11=f9,f8 // calculate high 64 bits of 128-bit product |
| ;; |
| getf.sig r8=f10 // (5 cyc) |
| getf.sig r9=f11 |
| ;; |
| shrp r8=r9,r8,IA64_NSEC_PER_CYC_SHIFT |
| br.ret.sptk.many rp |
| END(ia64_native_sched_clock) |
| #ifndef CONFIG_PARAVIRT |
| //unsigned long long |
| //sched_clock(void) __attribute__((alias("ia64_native_sched_clock"))); |
| .global sched_clock |
| sched_clock = ia64_native_sched_clock |
| #endif |
| |
| #ifdef CONFIG_VIRT_CPU_ACCOUNTING |
| GLOBAL_ENTRY(cycle_to_cputime) |
| alloc r16=ar.pfs,1,0,0,0 |
| addl r8=THIS_CPU(ia64_cpu_info) + IA64_CPUINFO_NSEC_PER_CYC_OFFSET,r0 |
| ;; |
| ldf8 f8=[r8] |
| ;; |
| setf.sig f9=r32 |
| ;; |
| xmpy.lu f10=f9,f8 // calculate low 64 bits of 128-bit product (4 cyc) |
| xmpy.hu f11=f9,f8 // calculate high 64 bits of 128-bit product |
| ;; |
| getf.sig r8=f10 // (5 cyc) |
| getf.sig r9=f11 |
| ;; |
| shrp r8=r9,r8,IA64_NSEC_PER_CYC_SHIFT |
| br.ret.sptk.many rp |
| END(cycle_to_cputime) |
| #endif /* CONFIG_VIRT_CPU_ACCOUNTING */ |
| |
| GLOBAL_ENTRY(start_kernel_thread) |
| .prologue |
| .save rp, r0 // this is the end of the call-chain |
| .body |
| alloc r2 = ar.pfs, 0, 0, 2, 0 |
| mov out0 = r9 |
| mov out1 = r11;; |
| br.call.sptk.many rp = kernel_thread_helper;; |
| mov out0 = r8 |
| br.call.sptk.many rp = sys_exit;; |
| 1: br.sptk.few 1b // not reached |
| END(start_kernel_thread) |
| |
| #ifdef CONFIG_IA64_BRL_EMU |
| |
| /* |
| * Assembly routines used by brl_emu.c to set preserved register state. |
| */ |
| |
| #define SET_REG(reg) \ |
| GLOBAL_ENTRY(ia64_set_##reg); \ |
| alloc r16=ar.pfs,1,0,0,0; \ |
| mov reg=r32; \ |
| ;; \ |
| br.ret.sptk.many rp; \ |
| END(ia64_set_##reg) |
| |
| SET_REG(b1); |
| SET_REG(b2); |
| SET_REG(b3); |
| SET_REG(b4); |
| SET_REG(b5); |
| |
| #endif /* CONFIG_IA64_BRL_EMU */ |
| |
| #ifdef CONFIG_SMP |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| GLOBAL_ENTRY(ia64_jump_to_sal) |
| alloc r16=ar.pfs,1,0,0,0;; |
| rsm psr.i | psr.ic |
| { |
| flushrs |
| srlz.i |
| } |
| tpa r25=in0 |
| movl r18=tlb_purge_done;; |
| DATA_VA_TO_PA(r18);; |
| mov b1=r18 // Return location |
| movl r18=ia64_do_tlb_purge;; |
| DATA_VA_TO_PA(r18);; |
| mov b2=r18 // doing tlb_flush work |
| mov ar.rsc=0 // Put RSE in enforced lazy, LE mode |
| movl r17=1f;; |
| DATA_VA_TO_PA(r17);; |
| mov cr.iip=r17 |
| movl r16=SAL_PSR_BITS_TO_SET;; |
| mov cr.ipsr=r16 |
| mov cr.ifs=r0;; |
| rfi;; // note: this unmask MCA/INIT (psr.mc) |
| 1: |
| /* |
| * Invalidate all TLB data/inst |
| */ |
| br.sptk.many b2;; // jump to tlb purge code |
| |
| tlb_purge_done: |
| RESTORE_REGION_REGS(r25, r17,r18,r19);; |
| RESTORE_REG(b0, r25, r17);; |
| RESTORE_REG(b1, r25, r17);; |
| RESTORE_REG(b2, r25, r17);; |
| RESTORE_REG(b3, r25, r17);; |
| RESTORE_REG(b4, r25, r17);; |
| RESTORE_REG(b5, r25, r17);; |
| ld8 r1=[r25],0x08;; |
| ld8 r12=[r25],0x08;; |
| ld8 r13=[r25],0x08;; |
| RESTORE_REG(ar.fpsr, r25, r17);; |
| RESTORE_REG(ar.pfs, r25, r17);; |
| RESTORE_REG(ar.rnat, r25, r17);; |
| RESTORE_REG(ar.unat, r25, r17);; |
| RESTORE_REG(ar.bspstore, r25, r17);; |
| RESTORE_REG(cr.dcr, r25, r17);; |
| RESTORE_REG(cr.iva, r25, r17);; |
| RESTORE_REG(cr.pta, r25, r17);; |
| srlz.d;; // required not to violate RAW dependency |
| RESTORE_REG(cr.itv, r25, r17);; |
| RESTORE_REG(cr.pmv, r25, r17);; |
| RESTORE_REG(cr.cmcv, r25, r17);; |
| RESTORE_REG(cr.lrr0, r25, r17);; |
| RESTORE_REG(cr.lrr1, r25, r17);; |
| ld8 r4=[r25],0x08;; |
| ld8 r5=[r25],0x08;; |
| ld8 r6=[r25],0x08;; |
| ld8 r7=[r25],0x08;; |
| ld8 r17=[r25],0x08;; |
| mov pr=r17,-1;; |
| RESTORE_REG(ar.lc, r25, r17);; |
| /* |
| * Now Restore floating point regs |
| */ |
| ldf.fill.nta f2=[r25],16;; |
| ldf.fill.nta f3=[r25],16;; |
| ldf.fill.nta f4=[r25],16;; |
| ldf.fill.nta f5=[r25],16;; |
| ldf.fill.nta f16=[r25],16;; |
| ldf.fill.nta f17=[r25],16;; |
| ldf.fill.nta f18=[r25],16;; |
| ldf.fill.nta f19=[r25],16;; |
| ldf.fill.nta f20=[r25],16;; |
| ldf.fill.nta f21=[r25],16;; |
| ldf.fill.nta f22=[r25],16;; |
| ldf.fill.nta f23=[r25],16;; |
| ldf.fill.nta f24=[r25],16;; |
| ldf.fill.nta f25=[r25],16;; |
| ldf.fill.nta f26=[r25],16;; |
| ldf.fill.nta f27=[r25],16;; |
| ldf.fill.nta f28=[r25],16;; |
| ldf.fill.nta f29=[r25],16;; |
| ldf.fill.nta f30=[r25],16;; |
| ldf.fill.nta f31=[r25],16;; |
| |
| /* |
| * Now that we have done all the register restores |
| * we are now ready for the big DIVE to SAL Land |
| */ |
| ssm psr.ic;; |
| srlz.d;; |
| br.ret.sptk.many b0;; |
| END(ia64_jump_to_sal) |
| #endif /* CONFIG_HOTPLUG_CPU */ |
| |
| #endif /* CONFIG_SMP */ |
