| if ARCH_SHMOBILE |
| |
| comment "SH-Mobile System Type" |
| |
| config ARCH_SH7367 |
| bool "SH-Mobile G3 (SH7367)" |
| select CPU_V6 |
| select SH_CLK_CPG |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| |
| config ARCH_SH7377 |
| bool "SH-Mobile G4 (SH7377)" |
| select CPU_V7 |
| select SH_CLK_CPG |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| |
| config ARCH_SH7372 |
| bool "SH-Mobile AP4 (SH7372)" |
| select CPU_V7 |
| select SH_CLK_CPG |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| |
| config ARCH_SH73A0 |
| bool "SH-Mobile AG5 (R8A73A00)" |
| select CPU_V7 |
| select SH_CLK_CPG |
| select ARCH_WANT_OPTIONAL_GPIOLIB |
| select ARM_GIC |
| select I2C |
| |
| comment "SH-Mobile Board Type" |
| |
| config MACH_G3EVM |
| bool "G3EVM board" |
| depends on ARCH_SH7367 |
| select ARCH_REQUIRE_GPIOLIB |
| |
| config MACH_G4EVM |
| bool "G4EVM board" |
| depends on ARCH_SH7377 |
| select ARCH_REQUIRE_GPIOLIB |
| |
| config MACH_AP4EVB |
| bool "AP4EVB board" |
| depends on ARCH_SH7372 |
| select ARCH_REQUIRE_GPIOLIB |
| select SH_LCD_MIPI_DSI |
| |
| choice |
| prompt "AP4EVB LCD panel selection" |
| default AP4EVB_QHD |
| depends on MACH_AP4EVB |
| |
| config AP4EVB_QHD |
| bool "MIPI-DSI QHD (960x540)" |
| |
| config AP4EVB_WVGA |
| bool "Parallel WVGA (800x480)" |
| |
| endchoice |
| |
| config MACH_AG5EVM |
| bool "AG5EVM board" |
| select ARCH_REQUIRE_GPIOLIB |
| select SH_LCD_MIPI_DSI |
| depends on ARCH_SH73A0 |
| |
| config MACH_MACKEREL |
| bool "mackerel board" |
| depends on ARCH_SH7372 |
| select ARCH_REQUIRE_GPIOLIB |
| |
| config MACH_KOTA2 |
| bool "KOTA2 board" |
| select ARCH_REQUIRE_GPIOLIB |
| depends on ARCH_SH73A0 |
| |
| comment "SH-Mobile System Configuration" |
| |
| menu "Memory configuration" |
| |
| config MEMORY_START |
| hex "Physical memory start address" |
| default "0x50000000" if MACH_G3EVM |
| default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \ |
| MACH_MACKEREL |
| default "0x41000000" if MACH_KOTA2 |
| default "0x00000000" |
| ---help--- |
| Tweak this only when porting to a new machine which does not |
| already have a defconfig. Changing it from the known correct |
| value on any of the known systems will only lead to disaster. |
| |
| config MEMORY_SIZE |
| hex "Physical memory size" |
| default "0x08000000" if MACH_G3EVM |
| default "0x08000000" if MACH_G4EVM |
| default "0x20000000" if MACH_AG5EVM |
| default "0x1e000000" if MACH_KOTA2 |
| default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL |
| default "0x04000000" |
| help |
| This sets the default memory size assumed by your kernel. It can |
| be overridden as normal by the 'mem=' argument on the kernel command |
| line. |
| |
| endmenu |
| |
| menu "Timer and clock configuration" |
| |
| config SHMOBILE_TIMER_HZ |
| int "Kernel HZ (jiffies per second)" |
| range 32 1024 |
| default "128" |
| help |
| Allows the configuration of the timer frequency. It is customary |
| to have the timer interrupt run at 1000 Hz or 100 Hz, but in the |
| case of low timer frequencies other values may be more suitable. |
| SH-Mobile systems using a 32768 Hz RCLK for clock events may want |
| to select a HZ value such as 128 that can evenly divide RCLK. |
| A HZ value that does not divide evenly may cause timer drift. |
| |
| config SH_TIMER_CMT |
| bool "CMT timer driver" |
| default y |
| help |
| This enables build of the CMT timer driver. |
| |
| config SH_TIMER_TMU |
| bool "TMU timer driver" |
| default y |
| help |
| This enables build of the TMU timer driver. |
| |
| endmenu |
| |
| config SH_CLK_CPG |
| bool |
| |
| source "drivers/sh/Kconfig" |
| |
| endif |
