Documentation/media/uapi/v4l/crop.rst - third_party/linux - Git at Google

 .. -*- coding: utf-8; mode: rst -*-

 .. _crop:

 *****************************************************
 Image Cropping, Insertion and Scaling -- the CROP API
 *****************************************************

 .. note::

    The CROP API is mostly superseded by the newer :ref:`SELECTION API
    <selection-api>`. The new API should be preferred in most cases,
    with the exception of pixel aspect ratio detection, which is
    implemented by :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` and has no
    equivalent in the SELECTION API. See :ref:`selection-vs-crop` for a
    comparison of the two APIs.

 Some video capture devices can sample a subsection of the picture and
 shrink or enlarge it to an image of arbitrary size. We call these
 abilities cropping and scaling. Some video output devices can scale an
 image up or down and insert it at an arbitrary scan line and horizontal
 offset into a video signal.

 Applications can use the following API to select an area in the video
 signal, query the default area and the hardware limits.

 .. note::

    Despite their name, the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>`,
    :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_S_CROP
    <VIDIOC_G_CROP>` ioctls apply to input as well as output devices.

 Scaling requires a source and a target. On a video capture or overlay
 device the source is the video signal, and the cropping ioctls determine
 the area actually sampled. The target are images read by the application
 or overlaid onto the graphics screen. Their size (and position for an
 overlay) is negotiated with the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
 and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctls.

 On a video output device the source are the images passed in by the
 application, and their size is again negotiated with the
 :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
 ioctls, or may be encoded in a compressed video stream. The target is
 the video signal, and the cropping ioctls determine the area where the
 images are inserted.

 Source and target rectangles are defined even if the device does not
 support scaling or the :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and
 :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` ioctls. Their size (and position
 where applicable) will be fixed in this case.

 .. note::

    All capture and output devices that support the CROP or SELECTION
    API will also support the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>`
    ioctl.

 Cropping Structures
 ===================


 .. _crop-scale:

 .. kernel-figure:: crop.svg
     :alt:    crop.svg
     :align:  center

     Image Cropping, Insertion and Scaling

     The cropping, insertion and scaling process


 For capture devices the coordinates of the top left corner, width and
 height of the area which can be sampled is given by the ``bounds``
 substructure of the struct :c:type:`v4l2_cropcap` returned
 by the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` ioctl. To support a wide
 range of hardware this specification does not define an origin or units.
 However by convention drivers should horizontally count unscaled samples
 relative to 0H (the leading edge of the horizontal sync pulse, see
 :ref:`vbi-hsync`). Vertically ITU-R line numbers of the first field
 (see ITU R-525 line numbering for :ref:`525 lines <vbi-525>` and for
 :ref:`625 lines <vbi-625>`), multiplied by two if the driver
 can capture both fields.

 The top left corner, width and height of the source rectangle, that is
 the area actually sampled, is given by struct
 :c:type:`v4l2_crop` using the same coordinate system as
 struct :c:type:`v4l2_cropcap`. Applications can use the
 :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>`
 ioctls to get and set this rectangle. It must lie completely within the
 capture boundaries and the driver may further adjust the requested size
 and/or position according to hardware limitations.

 Each capture device has a default source rectangle, given by the
 ``defrect`` substructure of struct
 :c:type:`v4l2_cropcap`. The center of this rectangle
 shall align with the center of the active picture area of the video
 signal, and cover what the driver writer considers the complete picture.
 Drivers shall reset the source rectangle to the default when the driver
 is first loaded, but not later.

 For output devices these structures and ioctls are used accordingly,
 defining the *target* rectangle where the images will be inserted into
 the video signal.


 Scaling Adjustments
 ===================

 Video hardware can have various cropping, insertion and scaling
 limitations. It may only scale up or down, support only discrete scaling
 factors, or have different scaling abilities in horizontal and vertical
 direction. Also it may not support scaling at all. At the same time the
 struct :c:type:`v4l2_crop` rectangle may have to be aligned,
 and both the source and target rectangles may have arbitrary upper and
 lower size limits. In particular the maximum ``width`` and ``height`` in
 struct :c:type:`v4l2_crop` may be smaller than the struct
 :c:type:`v4l2_cropcap`. ``bounds`` area. Therefore, as
 usual, drivers are expected to adjust the requested parameters and
 return the actual values selected.

 Applications can change the source or the target rectangle first, as
 they may prefer a particular image size or a certain area in the video
 signal. If the driver has to adjust both to satisfy hardware
 limitations, the last requested rectangle shall take priority, and the
 driver should preferably adjust the opposite one. The
 :ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl however shall not change
 the driver state and therefore only adjust the requested rectangle.

 Suppose scaling on a video capture device is restricted to a factor 1:1
 or 2:1 in either direction and the target image size must be a multiple
 of 16 × 16 pixels. The source cropping rectangle is set to defaults,
 which are also the upper limit in this example, of 640 × 400 pixels at
 offset 0, 0. An application requests an image size of 300 × 225 pixels,
 assuming video will be scaled down from the "full picture" accordingly.
 The driver sets the image size to the closest possible values 304 × 224,
 then chooses the cropping rectangle closest to the requested size, that
 is 608 × 224 (224 × 2:1 would exceed the limit 400). The offset 0, 0 is
 still valid, thus unmodified. Given the default cropping rectangle
 reported by :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` the application can
 easily propose another offset to center the cropping rectangle.

 Now the application may insist on covering an area using a picture
 aspect ratio closer to the original request, so it asks for a cropping
 rectangle of 608 × 456 pixels. The present scaling factors limit
 cropping to 640 × 384, so the driver returns the cropping size 608 × 384
 and adjusts the image size to closest possible 304 × 192.


 Examples
 ========

 Source and target rectangles shall remain unchanged across closing and
 reopening a device, such that piping data into or out of a device will
 work without special preparations. More advanced applications should
 ensure the parameters are suitable before starting I/O.

 .. note::

    On the next two examples, a video capture device is assumed;
    change ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` for other types of device.

 Example: Resetting the cropping parameters
 ==========================================

 .. code-block:: c

     struct v4l2_cropcap cropcap;
     struct v4l2_crop crop;

     memset (&cropcap, 0, sizeof (cropcap));
     cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

     if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
 	perror ("VIDIOC_CROPCAP");
 	exit (EXIT_FAILURE);
     }

     memset (&crop, 0, sizeof (crop));
     crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
     crop.c = cropcap.defrect;

     /* Ignore if cropping is not supported (EINVAL). */

     if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
 	&& errno != EINVAL) {
 	perror ("VIDIOC_S_CROP");
 	exit (EXIT_FAILURE);
     }


 Example: Simple downscaling
 ===========================

 .. code-block:: c

     struct v4l2_cropcap cropcap;
     struct v4l2_format format;

     reset_cropping_parameters ();

     /* Scale down to 1/4 size of full picture. */

     memset (&format, 0, sizeof (format)); /* defaults */

     format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

     format.fmt.pix.width = cropcap.defrect.width >> 1;
     format.fmt.pix.height = cropcap.defrect.height >> 1;
     format.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;

     if (-1 == ioctl (fd, VIDIOC_S_FMT, &format)) {
 	perror ("VIDIOC_S_FORMAT");
 	exit (EXIT_FAILURE);
     }

     /* We could check the actual image size now, the actual scaling factor
        or if the driver can scale at all. */

 Example: Selecting an output area
 =================================

 .. note:: This example assumes an output device.

 .. code-block:: c

     struct v4l2_cropcap cropcap;
     struct v4l2_crop crop;

     memset (&cropcap, 0, sizeof (cropcap));
     cropcap.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;

     if (-1 == ioctl (fd, VIDIOC_CROPCAP;, &cropcap)) {
 	perror ("VIDIOC_CROPCAP");
 	exit (EXIT_FAILURE);
     }

     memset (&crop, 0, sizeof (crop));

     crop.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
     crop.c = cropcap.defrect;

     /* Scale the width and height to 50 % of their original size
        and center the output. */

     crop.c.width /= 2;
     crop.c.height /= 2;
     crop.c.left += crop.c.width / 2;
     crop.c.top += crop.c.height / 2;

     /* Ignore if cropping is not supported (EINVAL). */

     if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
 	&& errno != EINVAL) {
 	perror ("VIDIOC_S_CROP");
 	exit (EXIT_FAILURE);
     }

 Example: Current scaling factor and pixel aspect
 ================================================

 .. note:: This example assumes a video capture device.

 .. code-block:: c

     struct v4l2_cropcap cropcap;
     struct v4l2_crop crop;
     struct v4l2_format format;
     double hscale, vscale;
     double aspect;
     int dwidth, dheight;

     memset (&cropcap, 0, sizeof (cropcap));
     cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

     if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
 	perror ("VIDIOC_CROPCAP");
 	exit (EXIT_FAILURE);
     }

     memset (&crop, 0, sizeof (crop));
     crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

     if (-1 == ioctl (fd, VIDIOC_G_CROP, &crop)) {
 	if (errno != EINVAL) {
 	    perror ("VIDIOC_G_CROP");
 	    exit (EXIT_FAILURE);
 	}

 	/* Cropping not supported. */
 	crop.c = cropcap.defrect;
     }

     memset (&format, 0, sizeof (format));
     format.fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

     if (-1 == ioctl (fd, VIDIOC_G_FMT, &format)) {
 	perror ("VIDIOC_G_FMT");
 	exit (EXIT_FAILURE);
     }

     /* The scaling applied by the driver. */

     hscale = format.fmt.pix.width / (double) crop.c.width;
     vscale = format.fmt.pix.height / (double) crop.c.height;

     aspect = cropcap.pixelaspect.numerator /
 	 (double) cropcap.pixelaspect.denominator;
     aspect = aspect * hscale / vscale;

     /* Devices following ITU-R BT.601 do not capture
        square pixels. For playback on a computer monitor
        we should scale the images to this size. */

     dwidth = format.fmt.pix.width / aspect;
     dheight = format.fmt.pix.height;
	.. -- coding: utf-8; mode: rst --

	.. _crop:

	*****************************************************
	Image Cropping, Insertion and Scaling -- the CROP API
	*****************************************************

	.. note::

	The CROP API is mostly superseded by the newer :ref:`SELECTION API
	<selection-api>`. The new API should be preferred in most cases,
	with the exception of pixel aspect ratio detection, which is
	implemented by :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` and has no
	equivalent in the SELECTION API. See :ref:`selection-vs-crop` for a
	comparison of the two APIs.

	Some video capture devices can sample a subsection of the picture and
	shrink or enlarge it to an image of arbitrary size. We call these
	abilities cropping and scaling. Some video output devices can scale an
	image up or down and insert it at an arbitrary scan line and horizontal
	offset into a video signal.

	Applications can use the following API to select an area in the video
	signal, query the default area and the hardware limits.

	.. note::

	Despite their name, the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>`,
	:ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_S_CROP
	<VIDIOC_G_CROP>` ioctls apply to input as well as output devices.

	Scaling requires a source and a target. On a video capture or overlay
	device the source is the video signal, and the cropping ioctls determine
	the area actually sampled. The target are images read by the application
	or overlaid onto the graphics screen. Their size (and position for an
	overlay) is negotiated with the :ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>`
	and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>` ioctls.

	On a video output device the source are the images passed in by the
	application, and their size is again negotiated with the
	:ref:`VIDIOC_G_FMT <VIDIOC_G_FMT>` and :ref:`VIDIOC_S_FMT <VIDIOC_G_FMT>`
	ioctls, or may be encoded in a compressed video stream. The target is
	the video signal, and the cropping ioctls determine the area where the
	images are inserted.

	Source and target rectangles are defined even if the device does not
	support scaling or the :ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and
	:ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>` ioctls. Their size (and position
	where applicable) will be fixed in this case.

	.. note::

	All capture and output devices that support the CROP or SELECTION
	API will also support the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>`
	ioctl.

	Cropping Structures
	===================


	.. _crop-scale:

	.. kernel-figure:: crop.svg
	:alt: crop.svg
	:align: center

	Image Cropping, Insertion and Scaling

	The cropping, insertion and scaling process



	For capture devices the coordinates of the top left corner, width and
	height of the area which can be sampled is given by the ``bounds``
	substructure of the struct :c:type:`v4l2_cropcap` returned
	by the :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` ioctl. To support a wide
	range of hardware this specification does not define an origin or units.
	However by convention drivers should horizontally count unscaled samples
	relative to 0H (the leading edge of the horizontal sync pulse, see
	:ref:`vbi-hsync`). Vertically ITU-R line numbers of the first field
	(see ITU R-525 line numbering for :ref:`525 lines <vbi-525>` and for
	:ref:`625 lines <vbi-625>`), multiplied by two if the driver
	can capture both fields.

	The top left corner, width and height of the source rectangle, that is
	the area actually sampled, is given by struct
	:c:type:`v4l2_crop` using the same coordinate system as
	struct :c:type:`v4l2_cropcap`. Applications can use the
	:ref:`VIDIOC_G_CROP <VIDIOC_G_CROP>` and :ref:`VIDIOC_S_CROP <VIDIOC_G_CROP>`
	ioctls to get and set this rectangle. It must lie completely within the
	capture boundaries and the driver may further adjust the requested size
	and/or position according to hardware limitations.

	Each capture device has a default source rectangle, given by the
	``defrect`` substructure of struct
	:c:type:`v4l2_cropcap`. The center of this rectangle
	shall align with the center of the active picture area of the video
	signal, and cover what the driver writer considers the complete picture.
	Drivers shall reset the source rectangle to the default when the driver
	is first loaded, but not later.

	For output devices these structures and ioctls are used accordingly,
	defining the target rectangle where the images will be inserted into
	the video signal.


	Scaling Adjustments
	===================

	Video hardware can have various cropping, insertion and scaling
	limitations. It may only scale up or down, support only discrete scaling
	factors, or have different scaling abilities in horizontal and vertical
	direction. Also it may not support scaling at all. At the same time the
	struct :c:type:`v4l2_crop` rectangle may have to be aligned,
	and both the source and target rectangles may have arbitrary upper and
	lower size limits. In particular the maximum ``width`` and ``height`` in
	struct :c:type:`v4l2_crop` may be smaller than the struct
	:c:type:`v4l2_cropcap`. ``bounds`` area. Therefore, as
	usual, drivers are expected to adjust the requested parameters and
	return the actual values selected.

	Applications can change the source or the target rectangle first, as
	they may prefer a particular image size or a certain area in the video
	signal. If the driver has to adjust both to satisfy hardware
	limitations, the last requested rectangle shall take priority, and the
	driver should preferably adjust the opposite one. The
	:ref:`VIDIOC_TRY_FMT <VIDIOC_G_FMT>` ioctl however shall not change
	the driver state and therefore only adjust the requested rectangle.

	Suppose scaling on a video capture device is restricted to a factor 1:1
	or 2:1 in either direction and the target image size must be a multiple
	of 16 × 16 pixels. The source cropping rectangle is set to defaults,
	which are also the upper limit in this example, of 640 × 400 pixels at
	offset 0, 0. An application requests an image size of 300 × 225 pixels,
	assuming video will be scaled down from the "full picture" accordingly.
	The driver sets the image size to the closest possible values 304 × 224,
	then chooses the cropping rectangle closest to the requested size, that
	is 608 × 224 (224 × 2:1 would exceed the limit 400). The offset 0, 0 is
	still valid, thus unmodified. Given the default cropping rectangle
	reported by :ref:`VIDIOC_CROPCAP <VIDIOC_CROPCAP>` the application can
	easily propose another offset to center the cropping rectangle.

	Now the application may insist on covering an area using a picture
	aspect ratio closer to the original request, so it asks for a cropping
	rectangle of 608 × 456 pixels. The present scaling factors limit
	cropping to 640 × 384, so the driver returns the cropping size 608 × 384
	and adjusts the image size to closest possible 304 × 192.


	Examples
	========

	Source and target rectangles shall remain unchanged across closing and
	reopening a device, such that piping data into or out of a device will
	work without special preparations. More advanced applications should
	ensure the parameters are suitable before starting I/O.

	.. note::

	On the next two examples, a video capture device is assumed;
	change ``V4L2_BUF_TYPE_VIDEO_CAPTURE`` for other types of device.

	Example: Resetting the cropping parameters
	==========================================

	.. code-block:: c

	struct v4l2_cropcap cropcap;
	struct v4l2_crop crop;

	memset (&cropcap, 0, sizeof (cropcap));
	cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

	if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
	perror ("VIDIOC_CROPCAP");
	exit (EXIT_FAILURE);
	}

	memset (&crop, 0, sizeof (crop));
	crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
	crop.c = cropcap.defrect;

	/* Ignore if cropping is not supported (EINVAL). */

	if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
	&& errno != EINVAL) {
	perror ("VIDIOC_S_CROP");
	exit (EXIT_FAILURE);
	}


	Example: Simple downscaling
	===========================

	.. code-block:: c

	struct v4l2_cropcap cropcap;
	struct v4l2_format format;

	reset_cropping_parameters ();

	/* Scale down to 1/4 size of full picture. */

	memset (&format, 0, sizeof (format)); /* defaults */

	format.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

	format.fmt.pix.width = cropcap.defrect.width >> 1;
	format.fmt.pix.height = cropcap.defrect.height >> 1;
	format.fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;

	if (-1 == ioctl (fd, VIDIOC_S_FMT, &format)) {
	perror ("VIDIOC_S_FORMAT");
	exit (EXIT_FAILURE);
	}

	/* We could check the actual image size now, the actual scaling factor
	or if the driver can scale at all. */

	Example: Selecting an output area
	=================================

	.. note:: This example assumes an output device.

	.. code-block:: c

	struct v4l2_cropcap cropcap;
	struct v4l2_crop crop;

	memset (&cropcap, 0, sizeof (cropcap));
	cropcap.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;

	if (-1 == ioctl (fd, VIDIOC_CROPCAP;, &cropcap)) {
	perror ("VIDIOC_CROPCAP");
	exit (EXIT_FAILURE);
	}

	memset (&crop, 0, sizeof (crop));

	crop.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
	crop.c = cropcap.defrect;

	/* Scale the width and height to 50 % of their original size
	and center the output. */

	crop.c.width /= 2;
	crop.c.height /= 2;
	crop.c.left += crop.c.width / 2;
	crop.c.top += crop.c.height / 2;

	/* Ignore if cropping is not supported (EINVAL). */

	if (-1 == ioctl (fd, VIDIOC_S_CROP, &crop)
	&& errno != EINVAL) {
	perror ("VIDIOC_S_CROP");
	exit (EXIT_FAILURE);
	}

	Example: Current scaling factor and pixel aspect
	================================================

	.. note:: This example assumes a video capture device.

	.. code-block:: c

	struct v4l2_cropcap cropcap;
	struct v4l2_crop crop;
	struct v4l2_format format;
	double hscale, vscale;
	double aspect;
	int dwidth, dheight;

	memset (&cropcap, 0, sizeof (cropcap));
	cropcap.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

	if (-1 == ioctl (fd, VIDIOC_CROPCAP, &cropcap)) {
	perror ("VIDIOC_CROPCAP");
	exit (EXIT_FAILURE);
	}

	memset (&crop, 0, sizeof (crop));
	crop.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

	if (-1 == ioctl (fd, VIDIOC_G_CROP, &crop)) {
	if (errno != EINVAL) {
	perror ("VIDIOC_G_CROP");
	exit (EXIT_FAILURE);
	}

	/* Cropping not supported. */
	crop.c = cropcap.defrect;
	}

	memset (&format, 0, sizeof (format));
	format.fmt.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;

	if (-1 == ioctl (fd, VIDIOC_G_FMT, &format)) {
	perror ("VIDIOC_G_FMT");
	exit (EXIT_FAILURE);
	}

	/* The scaling applied by the driver. */

	hscale = format.fmt.pix.width / (double) crop.c.width;
	vscale = format.fmt.pix.height / (double) crop.c.height;

	aspect = cropcap.pixelaspect.numerator /
	(double) cropcap.pixelaspect.denominator;
	aspect = aspect * hscale / vscale;

	/* Devices following ITU-R BT.601 do not capture
	square pixels. For playback on a computer monitor
	we should scale the images to this size. */

	dwidth = format.fmt.pix.width / aspect;
	dheight = format.fmt.pix.height;