|  | /* | 
|  | * CIPSO - Commercial IP Security Option | 
|  | * | 
|  | * This is an implementation of the CIPSO 2.2 protocol as specified in | 
|  | * draft-ietf-cipso-ipsecurity-01.txt with additional tag types as found in | 
|  | * FIPS-188, copies of both documents can be found in the Documentation | 
|  | * directory.  While CIPSO never became a full IETF RFC standard many vendors | 
|  | * have chosen to adopt the protocol and over the years it has become a | 
|  | * de-facto standard for labeled networking. | 
|  | * | 
|  | * Author: Paul Moore <paul.moore@hp.com> | 
|  | * | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * (c) Copyright Hewlett-Packard Development Company, L.P., 2006, 2008 | 
|  | * | 
|  | * This program is free software;  you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY;  without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See | 
|  | * the GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program;  if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/rcupdate.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/string.h> | 
|  | #include <linux/jhash.h> | 
|  | #include <linux/audit.h> | 
|  | #include <net/ip.h> | 
|  | #include <net/icmp.h> | 
|  | #include <net/tcp.h> | 
|  | #include <net/netlabel.h> | 
|  | #include <net/cipso_ipv4.h> | 
|  | #include <asm/atomic.h> | 
|  | #include <asm/bug.h> | 
|  | #include <asm/unaligned.h> | 
|  |  | 
|  | /* List of available DOI definitions */ | 
|  | /* XXX - This currently assumes a minimal number of different DOIs in use, | 
|  | * if in practice there are a lot of different DOIs this list should | 
|  | * probably be turned into a hash table or something similar so we | 
|  | * can do quick lookups. */ | 
|  | static DEFINE_SPINLOCK(cipso_v4_doi_list_lock); | 
|  | static LIST_HEAD(cipso_v4_doi_list); | 
|  |  | 
|  | /* Label mapping cache */ | 
|  | int cipso_v4_cache_enabled = 1; | 
|  | int cipso_v4_cache_bucketsize = 10; | 
|  | #define CIPSO_V4_CACHE_BUCKETBITS     7 | 
|  | #define CIPSO_V4_CACHE_BUCKETS        (1 << CIPSO_V4_CACHE_BUCKETBITS) | 
|  | #define CIPSO_V4_CACHE_REORDERLIMIT   10 | 
|  | struct cipso_v4_map_cache_bkt { | 
|  | spinlock_t lock; | 
|  | u32 size; | 
|  | struct list_head list; | 
|  | }; | 
|  | struct cipso_v4_map_cache_entry { | 
|  | u32 hash; | 
|  | unsigned char *key; | 
|  | size_t key_len; | 
|  |  | 
|  | struct netlbl_lsm_cache *lsm_data; | 
|  |  | 
|  | u32 activity; | 
|  | struct list_head list; | 
|  | }; | 
|  | static struct cipso_v4_map_cache_bkt *cipso_v4_cache = NULL; | 
|  |  | 
|  | /* Restricted bitmap (tag #1) flags */ | 
|  | int cipso_v4_rbm_optfmt = 0; | 
|  | int cipso_v4_rbm_strictvalid = 1; | 
|  |  | 
|  | /* | 
|  | * Protocol Constants | 
|  | */ | 
|  |  | 
|  | /* Maximum size of the CIPSO IP option, derived from the fact that the maximum | 
|  | * IPv4 header size is 60 bytes and the base IPv4 header is 20 bytes long. */ | 
|  | #define CIPSO_V4_OPT_LEN_MAX          40 | 
|  |  | 
|  | /* Length of the base CIPSO option, this includes the option type (1 byte), the | 
|  | * option length (1 byte), and the DOI (4 bytes). */ | 
|  | #define CIPSO_V4_HDR_LEN              6 | 
|  |  | 
|  | /* Base length of the restrictive category bitmap tag (tag #1). */ | 
|  | #define CIPSO_V4_TAG_RBM_BLEN         4 | 
|  |  | 
|  | /* Base length of the enumerated category tag (tag #2). */ | 
|  | #define CIPSO_V4_TAG_ENUM_BLEN        4 | 
|  |  | 
|  | /* Base length of the ranged categories bitmap tag (tag #5). */ | 
|  | #define CIPSO_V4_TAG_RNG_BLEN         4 | 
|  | /* The maximum number of category ranges permitted in the ranged category tag | 
|  | * (tag #5).  You may note that the IETF draft states that the maximum number | 
|  | * of category ranges is 7, but if the low end of the last category range is | 
|  | * zero then it is possibile to fit 8 category ranges because the zero should | 
|  | * be omitted. */ | 
|  | #define CIPSO_V4_TAG_RNG_CAT_MAX      8 | 
|  |  | 
|  | /* Base length of the local tag (non-standard tag). | 
|  | *  Tag definition (may change between kernel versions) | 
|  | * | 
|  | * 0          8          16         24         32 | 
|  | * +----------+----------+----------+----------+ | 
|  | * | 10000000 | 00000110 | 32-bit secid value  | | 
|  | * +----------+----------+----------+----------+ | 
|  | * | in (host byte order)| | 
|  | * +----------+----------+ | 
|  | * | 
|  | */ | 
|  | #define CIPSO_V4_TAG_LOC_BLEN         6 | 
|  |  | 
|  | /* | 
|  | * Helper Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_bitmap_walk - Walk a bitmap looking for a bit | 
|  | * @bitmap: the bitmap | 
|  | * @bitmap_len: length in bits | 
|  | * @offset: starting offset | 
|  | * @state: if non-zero, look for a set (1) bit else look for a cleared (0) bit | 
|  | * | 
|  | * Description: | 
|  | * Starting at @offset, walk the bitmap from left to right until either the | 
|  | * desired bit is found or we reach the end.  Return the bit offset, -1 if | 
|  | * not found, or -2 if error. | 
|  | */ | 
|  | static int cipso_v4_bitmap_walk(const unsigned char *bitmap, | 
|  | u32 bitmap_len, | 
|  | u32 offset, | 
|  | u8 state) | 
|  | { | 
|  | u32 bit_spot; | 
|  | u32 byte_offset; | 
|  | unsigned char bitmask; | 
|  | unsigned char byte; | 
|  |  | 
|  | /* gcc always rounds to zero when doing integer division */ | 
|  | byte_offset = offset / 8; | 
|  | byte = bitmap[byte_offset]; | 
|  | bit_spot = offset; | 
|  | bitmask = 0x80 >> (offset % 8); | 
|  |  | 
|  | while (bit_spot < bitmap_len) { | 
|  | if ((state && (byte & bitmask) == bitmask) || | 
|  | (state == 0 && (byte & bitmask) == 0)) | 
|  | return bit_spot; | 
|  |  | 
|  | bit_spot++; | 
|  | bitmask >>= 1; | 
|  | if (bitmask == 0) { | 
|  | byte = bitmap[++byte_offset]; | 
|  | bitmask = 0x80; | 
|  | } | 
|  | } | 
|  |  | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_bitmap_setbit - Sets a single bit in a bitmap | 
|  | * @bitmap: the bitmap | 
|  | * @bit: the bit | 
|  | * @state: if non-zero, set the bit (1) else clear the bit (0) | 
|  | * | 
|  | * Description: | 
|  | * Set a single bit in the bitmask.  Returns zero on success, negative values | 
|  | * on error. | 
|  | */ | 
|  | static void cipso_v4_bitmap_setbit(unsigned char *bitmap, | 
|  | u32 bit, | 
|  | u8 state) | 
|  | { | 
|  | u32 byte_spot; | 
|  | u8 bitmask; | 
|  |  | 
|  | /* gcc always rounds to zero when doing integer division */ | 
|  | byte_spot = bit / 8; | 
|  | bitmask = 0x80 >> (bit % 8); | 
|  | if (state) | 
|  | bitmap[byte_spot] |= bitmask; | 
|  | else | 
|  | bitmap[byte_spot] &= ~bitmask; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_entry_free - Frees a cache entry | 
|  | * @entry: the entry to free | 
|  | * | 
|  | * Description: | 
|  | * This function frees the memory associated with a cache entry including the | 
|  | * LSM cache data if there are no longer any users, i.e. reference count == 0. | 
|  | * | 
|  | */ | 
|  | static void cipso_v4_cache_entry_free(struct cipso_v4_map_cache_entry *entry) | 
|  | { | 
|  | if (entry->lsm_data) | 
|  | netlbl_secattr_cache_free(entry->lsm_data); | 
|  | kfree(entry->key); | 
|  | kfree(entry); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cache_hash - Hashing function for the CIPSO cache | 
|  | * @key: the hash key | 
|  | * @key_len: the length of the key in bytes | 
|  | * | 
|  | * Description: | 
|  | * The CIPSO tag hashing function.  Returns a 32-bit hash value. | 
|  | * | 
|  | */ | 
|  | static u32 cipso_v4_map_cache_hash(const unsigned char *key, u32 key_len) | 
|  | { | 
|  | return jhash(key, key_len, 0); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Label Mapping Cache Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_init - Initialize the CIPSO cache | 
|  | * | 
|  | * Description: | 
|  | * Initializes the CIPSO label mapping cache, this function should be called | 
|  | * before any of the other functions defined in this file.  Returns zero on | 
|  | * success, negative values on error. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_cache_init(void) | 
|  | { | 
|  | u32 iter; | 
|  |  | 
|  | cipso_v4_cache = kcalloc(CIPSO_V4_CACHE_BUCKETS, | 
|  | sizeof(struct cipso_v4_map_cache_bkt), | 
|  | GFP_KERNEL); | 
|  | if (cipso_v4_cache == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | for (iter = 0; iter < CIPSO_V4_CACHE_BUCKETS; iter++) { | 
|  | spin_lock_init(&cipso_v4_cache[iter].lock); | 
|  | cipso_v4_cache[iter].size = 0; | 
|  | INIT_LIST_HEAD(&cipso_v4_cache[iter].list); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_invalidate - Invalidates the current CIPSO cache | 
|  | * | 
|  | * Description: | 
|  | * Invalidates and frees any entries in the CIPSO cache.  Returns zero on | 
|  | * success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | void cipso_v4_cache_invalidate(void) | 
|  | { | 
|  | struct cipso_v4_map_cache_entry *entry, *tmp_entry; | 
|  | u32 iter; | 
|  |  | 
|  | for (iter = 0; iter < CIPSO_V4_CACHE_BUCKETS; iter++) { | 
|  | spin_lock_bh(&cipso_v4_cache[iter].lock); | 
|  | list_for_each_entry_safe(entry, | 
|  | tmp_entry, | 
|  | &cipso_v4_cache[iter].list, list) { | 
|  | list_del(&entry->list); | 
|  | cipso_v4_cache_entry_free(entry); | 
|  | } | 
|  | cipso_v4_cache[iter].size = 0; | 
|  | spin_unlock_bh(&cipso_v4_cache[iter].lock); | 
|  | } | 
|  |  | 
|  | return; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_check - Check the CIPSO cache for a label mapping | 
|  | * @key: the buffer to check | 
|  | * @key_len: buffer length in bytes | 
|  | * @secattr: the security attribute struct to use | 
|  | * | 
|  | * Description: | 
|  | * This function checks the cache to see if a label mapping already exists for | 
|  | * the given key.  If there is a match then the cache is adjusted and the | 
|  | * @secattr struct is populated with the correct LSM security attributes.  The | 
|  | * cache is adjusted in the following manner if the entry is not already the | 
|  | * first in the cache bucket: | 
|  | * | 
|  | *  1. The cache entry's activity counter is incremented | 
|  | *  2. The previous (higher ranking) entry's activity counter is decremented | 
|  | *  3. If the difference between the two activity counters is geater than | 
|  | *     CIPSO_V4_CACHE_REORDERLIMIT the two entries are swapped | 
|  | * | 
|  | * Returns zero on success, -ENOENT for a cache miss, and other negative values | 
|  | * on error. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_cache_check(const unsigned char *key, | 
|  | u32 key_len, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | u32 bkt; | 
|  | struct cipso_v4_map_cache_entry *entry; | 
|  | struct cipso_v4_map_cache_entry *prev_entry = NULL; | 
|  | u32 hash; | 
|  |  | 
|  | if (!cipso_v4_cache_enabled) | 
|  | return -ENOENT; | 
|  |  | 
|  | hash = cipso_v4_map_cache_hash(key, key_len); | 
|  | bkt = hash & (CIPSO_V4_CACHE_BUCKETS - 1); | 
|  | spin_lock_bh(&cipso_v4_cache[bkt].lock); | 
|  | list_for_each_entry(entry, &cipso_v4_cache[bkt].list, list) { | 
|  | if (entry->hash == hash && | 
|  | entry->key_len == key_len && | 
|  | memcmp(entry->key, key, key_len) == 0) { | 
|  | entry->activity += 1; | 
|  | atomic_inc(&entry->lsm_data->refcount); | 
|  | secattr->cache = entry->lsm_data; | 
|  | secattr->flags |= NETLBL_SECATTR_CACHE; | 
|  | secattr->type = NETLBL_NLTYPE_CIPSOV4; | 
|  | if (prev_entry == NULL) { | 
|  | spin_unlock_bh(&cipso_v4_cache[bkt].lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (prev_entry->activity > 0) | 
|  | prev_entry->activity -= 1; | 
|  | if (entry->activity > prev_entry->activity && | 
|  | entry->activity - prev_entry->activity > | 
|  | CIPSO_V4_CACHE_REORDERLIMIT) { | 
|  | __list_del(entry->list.prev, entry->list.next); | 
|  | __list_add(&entry->list, | 
|  | prev_entry->list.prev, | 
|  | &prev_entry->list); | 
|  | } | 
|  |  | 
|  | spin_unlock_bh(&cipso_v4_cache[bkt].lock); | 
|  | return 0; | 
|  | } | 
|  | prev_entry = entry; | 
|  | } | 
|  | spin_unlock_bh(&cipso_v4_cache[bkt].lock); | 
|  |  | 
|  | return -ENOENT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_cache_add - Add an entry to the CIPSO cache | 
|  | * @skb: the packet | 
|  | * @secattr: the packet's security attributes | 
|  | * | 
|  | * Description: | 
|  | * Add a new entry into the CIPSO label mapping cache.  Add the new entry to | 
|  | * head of the cache bucket's list, if the cache bucket is out of room remove | 
|  | * the last entry in the list first.  It is important to note that there is | 
|  | * currently no checking for duplicate keys.  Returns zero on success, | 
|  | * negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_cache_add(const struct sk_buff *skb, | 
|  | const struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val = -EPERM; | 
|  | u32 bkt; | 
|  | struct cipso_v4_map_cache_entry *entry = NULL; | 
|  | struct cipso_v4_map_cache_entry *old_entry = NULL; | 
|  | unsigned char *cipso_ptr; | 
|  | u32 cipso_ptr_len; | 
|  |  | 
|  | if (!cipso_v4_cache_enabled || cipso_v4_cache_bucketsize <= 0) | 
|  | return 0; | 
|  |  | 
|  | cipso_ptr = CIPSO_V4_OPTPTR(skb); | 
|  | cipso_ptr_len = cipso_ptr[1]; | 
|  |  | 
|  | entry = kzalloc(sizeof(*entry), GFP_ATOMIC); | 
|  | if (entry == NULL) | 
|  | return -ENOMEM; | 
|  | entry->key = kmemdup(cipso_ptr, cipso_ptr_len, GFP_ATOMIC); | 
|  | if (entry->key == NULL) { | 
|  | ret_val = -ENOMEM; | 
|  | goto cache_add_failure; | 
|  | } | 
|  | entry->key_len = cipso_ptr_len; | 
|  | entry->hash = cipso_v4_map_cache_hash(cipso_ptr, cipso_ptr_len); | 
|  | atomic_inc(&secattr->cache->refcount); | 
|  | entry->lsm_data = secattr->cache; | 
|  |  | 
|  | bkt = entry->hash & (CIPSO_V4_CACHE_BUCKETS - 1); | 
|  | spin_lock_bh(&cipso_v4_cache[bkt].lock); | 
|  | if (cipso_v4_cache[bkt].size < cipso_v4_cache_bucketsize) { | 
|  | list_add(&entry->list, &cipso_v4_cache[bkt].list); | 
|  | cipso_v4_cache[bkt].size += 1; | 
|  | } else { | 
|  | old_entry = list_entry(cipso_v4_cache[bkt].list.prev, | 
|  | struct cipso_v4_map_cache_entry, list); | 
|  | list_del(&old_entry->list); | 
|  | list_add(&entry->list, &cipso_v4_cache[bkt].list); | 
|  | cipso_v4_cache_entry_free(old_entry); | 
|  | } | 
|  | spin_unlock_bh(&cipso_v4_cache[bkt].lock); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | cache_add_failure: | 
|  | if (entry) | 
|  | cipso_v4_cache_entry_free(entry); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * DOI List Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_search - Searches for a DOI definition | 
|  | * @doi: the DOI to search for | 
|  | * | 
|  | * Description: | 
|  | * Search the DOI definition list for a DOI definition with a DOI value that | 
|  | * matches @doi.  The caller is responsibile for calling rcu_read_[un]lock(). | 
|  | * Returns a pointer to the DOI definition on success and NULL on failure. | 
|  | */ | 
|  | static struct cipso_v4_doi *cipso_v4_doi_search(u32 doi) | 
|  | { | 
|  | struct cipso_v4_doi *iter; | 
|  |  | 
|  | list_for_each_entry_rcu(iter, &cipso_v4_doi_list, list) | 
|  | if (iter->doi == doi && atomic_read(&iter->refcount)) | 
|  | return iter; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_add - Add a new DOI to the CIPSO protocol engine | 
|  | * @doi_def: the DOI structure | 
|  | * @audit_info: NetLabel audit information | 
|  | * | 
|  | * Description: | 
|  | * The caller defines a new DOI for use by the CIPSO engine and calls this | 
|  | * function to add it to the list of acceptable domains.  The caller must | 
|  | * ensure that the mapping table specified in @doi_def->map meets all of the | 
|  | * requirements of the mapping type (see cipso_ipv4.h for details).  Returns | 
|  | * zero on success and non-zero on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_doi_add(struct cipso_v4_doi *doi_def, | 
|  | struct netlbl_audit *audit_info) | 
|  | { | 
|  | int ret_val = -EINVAL; | 
|  | u32 iter; | 
|  | u32 doi; | 
|  | u32 doi_type; | 
|  | struct audit_buffer *audit_buf; | 
|  |  | 
|  | doi = doi_def->doi; | 
|  | doi_type = doi_def->type; | 
|  |  | 
|  | if (doi_def == NULL || doi_def->doi == CIPSO_V4_DOI_UNKNOWN) | 
|  | goto doi_add_return; | 
|  | for (iter = 0; iter < CIPSO_V4_TAG_MAXCNT; iter++) { | 
|  | switch (doi_def->tags[iter]) { | 
|  | case CIPSO_V4_TAG_RBITMAP: | 
|  | break; | 
|  | case CIPSO_V4_TAG_RANGE: | 
|  | case CIPSO_V4_TAG_ENUM: | 
|  | if (doi_def->type != CIPSO_V4_MAP_PASS) | 
|  | goto doi_add_return; | 
|  | break; | 
|  | case CIPSO_V4_TAG_LOCAL: | 
|  | if (doi_def->type != CIPSO_V4_MAP_LOCAL) | 
|  | goto doi_add_return; | 
|  | break; | 
|  | case CIPSO_V4_TAG_INVALID: | 
|  | if (iter == 0) | 
|  | goto doi_add_return; | 
|  | break; | 
|  | default: | 
|  | goto doi_add_return; | 
|  | } | 
|  | } | 
|  |  | 
|  | atomic_set(&doi_def->refcount, 1); | 
|  |  | 
|  | spin_lock(&cipso_v4_doi_list_lock); | 
|  | if (cipso_v4_doi_search(doi_def->doi) != NULL) { | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | ret_val = -EEXIST; | 
|  | goto doi_add_return; | 
|  | } | 
|  | list_add_tail_rcu(&doi_def->list, &cipso_v4_doi_list); | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | ret_val = 0; | 
|  |  | 
|  | doi_add_return: | 
|  | audit_buf = netlbl_audit_start(AUDIT_MAC_CIPSOV4_ADD, audit_info); | 
|  | if (audit_buf != NULL) { | 
|  | const char *type_str; | 
|  | switch (doi_type) { | 
|  | case CIPSO_V4_MAP_TRANS: | 
|  | type_str = "trans"; | 
|  | break; | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | type_str = "pass"; | 
|  | break; | 
|  | case CIPSO_V4_MAP_LOCAL: | 
|  | type_str = "local"; | 
|  | break; | 
|  | default: | 
|  | type_str = "(unknown)"; | 
|  | } | 
|  | audit_log_format(audit_buf, | 
|  | " cipso_doi=%u cipso_type=%s res=%u", | 
|  | doi, type_str, ret_val == 0 ? 1 : 0); | 
|  | audit_log_end(audit_buf); | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_free - Frees a DOI definition | 
|  | * @entry: the entry's RCU field | 
|  | * | 
|  | * Description: | 
|  | * This function frees all of the memory associated with a DOI definition. | 
|  | * | 
|  | */ | 
|  | void cipso_v4_doi_free(struct cipso_v4_doi *doi_def) | 
|  | { | 
|  | if (doi_def == NULL) | 
|  | return; | 
|  |  | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_TRANS: | 
|  | kfree(doi_def->map.std->lvl.cipso); | 
|  | kfree(doi_def->map.std->lvl.local); | 
|  | kfree(doi_def->map.std->cat.cipso); | 
|  | kfree(doi_def->map.std->cat.local); | 
|  | break; | 
|  | } | 
|  | kfree(doi_def); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_free_rcu - Frees a DOI definition via the RCU pointer | 
|  | * @entry: the entry's RCU field | 
|  | * | 
|  | * Description: | 
|  | * This function is designed to be used as a callback to the call_rcu() | 
|  | * function so that the memory allocated to the DOI definition can be released | 
|  | * safely. | 
|  | * | 
|  | */ | 
|  | static void cipso_v4_doi_free_rcu(struct rcu_head *entry) | 
|  | { | 
|  | struct cipso_v4_doi *doi_def; | 
|  |  | 
|  | doi_def = container_of(entry, struct cipso_v4_doi, rcu); | 
|  | cipso_v4_doi_free(doi_def); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_remove - Remove an existing DOI from the CIPSO protocol engine | 
|  | * @doi: the DOI value | 
|  | * @audit_secid: the LSM secid to use in the audit message | 
|  | * | 
|  | * Description: | 
|  | * Removes a DOI definition from the CIPSO engine.  The NetLabel routines will | 
|  | * be called to release their own LSM domain mappings as well as our own | 
|  | * domain list.  Returns zero on success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_doi_remove(u32 doi, struct netlbl_audit *audit_info) | 
|  | { | 
|  | int ret_val; | 
|  | struct cipso_v4_doi *doi_def; | 
|  | struct audit_buffer *audit_buf; | 
|  |  | 
|  | spin_lock(&cipso_v4_doi_list_lock); | 
|  | doi_def = cipso_v4_doi_search(doi); | 
|  | if (doi_def == NULL) { | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | ret_val = -ENOENT; | 
|  | goto doi_remove_return; | 
|  | } | 
|  | if (!atomic_dec_and_test(&doi_def->refcount)) { | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  | ret_val = -EBUSY; | 
|  | goto doi_remove_return; | 
|  | } | 
|  | list_del_rcu(&doi_def->list); | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  |  | 
|  | cipso_v4_cache_invalidate(); | 
|  | call_rcu(&doi_def->rcu, cipso_v4_doi_free_rcu); | 
|  | ret_val = 0; | 
|  |  | 
|  | doi_remove_return: | 
|  | audit_buf = netlbl_audit_start(AUDIT_MAC_CIPSOV4_DEL, audit_info); | 
|  | if (audit_buf != NULL) { | 
|  | audit_log_format(audit_buf, | 
|  | " cipso_doi=%u res=%u", | 
|  | doi, ret_val == 0 ? 1 : 0); | 
|  | audit_log_end(audit_buf); | 
|  | } | 
|  |  | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_getdef - Returns a reference to a valid DOI definition | 
|  | * @doi: the DOI value | 
|  | * | 
|  | * Description: | 
|  | * Searches for a valid DOI definition and if one is found it is returned to | 
|  | * the caller.  Otherwise NULL is returned.  The caller must ensure that | 
|  | * rcu_read_lock() is held while accessing the returned definition and the DOI | 
|  | * definition reference count is decremented when the caller is done. | 
|  | * | 
|  | */ | 
|  | struct cipso_v4_doi *cipso_v4_doi_getdef(u32 doi) | 
|  | { | 
|  | struct cipso_v4_doi *doi_def; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | doi_def = cipso_v4_doi_search(doi); | 
|  | if (doi_def == NULL) | 
|  | goto doi_getdef_return; | 
|  | if (!atomic_inc_not_zero(&doi_def->refcount)) | 
|  | doi_def = NULL; | 
|  |  | 
|  | doi_getdef_return: | 
|  | rcu_read_unlock(); | 
|  | return doi_def; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_putdef - Releases a reference for the given DOI definition | 
|  | * @doi_def: the DOI definition | 
|  | * | 
|  | * Description: | 
|  | * Releases a DOI definition reference obtained from cipso_v4_doi_getdef(). | 
|  | * | 
|  | */ | 
|  | void cipso_v4_doi_putdef(struct cipso_v4_doi *doi_def) | 
|  | { | 
|  | if (doi_def == NULL) | 
|  | return; | 
|  |  | 
|  | if (!atomic_dec_and_test(&doi_def->refcount)) | 
|  | return; | 
|  | spin_lock(&cipso_v4_doi_list_lock); | 
|  | list_del_rcu(&doi_def->list); | 
|  | spin_unlock(&cipso_v4_doi_list_lock); | 
|  |  | 
|  | cipso_v4_cache_invalidate(); | 
|  | call_rcu(&doi_def->rcu, cipso_v4_doi_free_rcu); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_doi_walk - Iterate through the DOI definitions | 
|  | * @skip_cnt: skip past this number of DOI definitions, updated | 
|  | * @callback: callback for each DOI definition | 
|  | * @cb_arg: argument for the callback function | 
|  | * | 
|  | * Description: | 
|  | * Iterate over the DOI definition list, skipping the first @skip_cnt entries. | 
|  | * For each entry call @callback, if @callback returns a negative value stop | 
|  | * 'walking' through the list and return.  Updates the value in @skip_cnt upon | 
|  | * return.  Returns zero on success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_doi_walk(u32 *skip_cnt, | 
|  | int (*callback) (struct cipso_v4_doi *doi_def, void *arg), | 
|  | void *cb_arg) | 
|  | { | 
|  | int ret_val = -ENOENT; | 
|  | u32 doi_cnt = 0; | 
|  | struct cipso_v4_doi *iter_doi; | 
|  |  | 
|  | rcu_read_lock(); | 
|  | list_for_each_entry_rcu(iter_doi, &cipso_v4_doi_list, list) | 
|  | if (atomic_read(&iter_doi->refcount) > 0) { | 
|  | if (doi_cnt++ < *skip_cnt) | 
|  | continue; | 
|  | ret_val = callback(iter_doi, cb_arg); | 
|  | if (ret_val < 0) { | 
|  | doi_cnt--; | 
|  | goto doi_walk_return; | 
|  | } | 
|  | } | 
|  |  | 
|  | doi_walk_return: | 
|  | rcu_read_unlock(); | 
|  | *skip_cnt = doi_cnt; | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Label Mapping Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_lvl_valid - Checks to see if the given level is understood | 
|  | * @doi_def: the DOI definition | 
|  | * @level: the level to check | 
|  | * | 
|  | * Description: | 
|  | * Checks the given level against the given DOI definition and returns a | 
|  | * negative value if the level does not have a valid mapping and a zero value | 
|  | * if the level is defined by the DOI. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_lvl_valid(const struct cipso_v4_doi *doi_def, u8 level) | 
|  | { | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | return 0; | 
|  | case CIPSO_V4_MAP_TRANS: | 
|  | if (doi_def->map.std->lvl.cipso[level] < CIPSO_V4_INV_LVL) | 
|  | return 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_lvl_hton - Perform a level mapping from the host to the network | 
|  | * @doi_def: the DOI definition | 
|  | * @host_lvl: the host MLS level | 
|  | * @net_lvl: the network/CIPSO MLS level | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a local MLS level to the correct | 
|  | * CIPSO level using the given DOI definition.  Returns zero on success, | 
|  | * negative values otherwise. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_lvl_hton(const struct cipso_v4_doi *doi_def, | 
|  | u32 host_lvl, | 
|  | u32 *net_lvl) | 
|  | { | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | *net_lvl = host_lvl; | 
|  | return 0; | 
|  | case CIPSO_V4_MAP_TRANS: | 
|  | if (host_lvl < doi_def->map.std->lvl.local_size && | 
|  | doi_def->map.std->lvl.local[host_lvl] < CIPSO_V4_INV_LVL) { | 
|  | *net_lvl = doi_def->map.std->lvl.local[host_lvl]; | 
|  | return 0; | 
|  | } | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_lvl_ntoh - Perform a level mapping from the network to the host | 
|  | * @doi_def: the DOI definition | 
|  | * @net_lvl: the network/CIPSO MLS level | 
|  | * @host_lvl: the host MLS level | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a CIPSO level to the correct local MLS | 
|  | * level using the given DOI definition.  Returns zero on success, negative | 
|  | * values otherwise. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_lvl_ntoh(const struct cipso_v4_doi *doi_def, | 
|  | u32 net_lvl, | 
|  | u32 *host_lvl) | 
|  | { | 
|  | struct cipso_v4_std_map_tbl *map_tbl; | 
|  |  | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | *host_lvl = net_lvl; | 
|  | return 0; | 
|  | case CIPSO_V4_MAP_TRANS: | 
|  | map_tbl = doi_def->map.std; | 
|  | if (net_lvl < map_tbl->lvl.cipso_size && | 
|  | map_tbl->lvl.cipso[net_lvl] < CIPSO_V4_INV_LVL) { | 
|  | *host_lvl = doi_def->map.std->lvl.cipso[net_lvl]; | 
|  | return 0; | 
|  | } | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_rbm_valid - Checks to see if the category bitmap is valid | 
|  | * @doi_def: the DOI definition | 
|  | * @bitmap: category bitmap | 
|  | * @bitmap_len: bitmap length in bytes | 
|  | * | 
|  | * Description: | 
|  | * Checks the given category bitmap against the given DOI definition and | 
|  | * returns a negative value if any of the categories in the bitmap do not have | 
|  | * a valid mapping and a zero value if all of the categories are valid. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_rbm_valid(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *bitmap, | 
|  | u32 bitmap_len) | 
|  | { | 
|  | int cat = -1; | 
|  | u32 bitmap_len_bits = bitmap_len * 8; | 
|  | u32 cipso_cat_size; | 
|  | u32 *cipso_array; | 
|  |  | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | return 0; | 
|  | case CIPSO_V4_MAP_TRANS: | 
|  | cipso_cat_size = doi_def->map.std->cat.cipso_size; | 
|  | cipso_array = doi_def->map.std->cat.cipso; | 
|  | for (;;) { | 
|  | cat = cipso_v4_bitmap_walk(bitmap, | 
|  | bitmap_len_bits, | 
|  | cat + 1, | 
|  | 1); | 
|  | if (cat < 0) | 
|  | break; | 
|  | if (cat >= cipso_cat_size || | 
|  | cipso_array[cat] >= CIPSO_V4_INV_CAT) | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | if (cat == -1) | 
|  | return 0; | 
|  | break; | 
|  | } | 
|  |  | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_rbm_hton - Perform a category mapping from host to network | 
|  | * @doi_def: the DOI definition | 
|  | * @secattr: the security attributes | 
|  | * @net_cat: the zero'd out category bitmap in network/CIPSO format | 
|  | * @net_cat_len: the length of the CIPSO bitmap in bytes | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a local MLS category bitmap to the | 
|  | * correct CIPSO bitmap using the given DOI definition.  Returns the minimum | 
|  | * size in bytes of the network bitmap on success, negative values otherwise. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_rbm_hton(const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr, | 
|  | unsigned char *net_cat, | 
|  | u32 net_cat_len) | 
|  | { | 
|  | int host_spot = -1; | 
|  | u32 net_spot = CIPSO_V4_INV_CAT; | 
|  | u32 net_spot_max = 0; | 
|  | u32 net_clen_bits = net_cat_len * 8; | 
|  | u32 host_cat_size = 0; | 
|  | u32 *host_cat_array = NULL; | 
|  |  | 
|  | if (doi_def->type == CIPSO_V4_MAP_TRANS) { | 
|  | host_cat_size = doi_def->map.std->cat.local_size; | 
|  | host_cat_array = doi_def->map.std->cat.local; | 
|  | } | 
|  |  | 
|  | for (;;) { | 
|  | host_spot = netlbl_secattr_catmap_walk(secattr->attr.mls.cat, | 
|  | host_spot + 1); | 
|  | if (host_spot < 0) | 
|  | break; | 
|  |  | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | net_spot = host_spot; | 
|  | break; | 
|  | case CIPSO_V4_MAP_TRANS: | 
|  | if (host_spot >= host_cat_size) | 
|  | return -EPERM; | 
|  | net_spot = host_cat_array[host_spot]; | 
|  | if (net_spot >= CIPSO_V4_INV_CAT) | 
|  | return -EPERM; | 
|  | break; | 
|  | } | 
|  | if (net_spot >= net_clen_bits) | 
|  | return -ENOSPC; | 
|  | cipso_v4_bitmap_setbit(net_cat, net_spot, 1); | 
|  |  | 
|  | if (net_spot > net_spot_max) | 
|  | net_spot_max = net_spot; | 
|  | } | 
|  |  | 
|  | if (++net_spot_max % 8) | 
|  | return net_spot_max / 8 + 1; | 
|  | return net_spot_max / 8; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_rbm_ntoh - Perform a category mapping from network to host | 
|  | * @doi_def: the DOI definition | 
|  | * @net_cat: the category bitmap in network/CIPSO format | 
|  | * @net_cat_len: the length of the CIPSO bitmap in bytes | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a CIPSO bitmap to the correct local | 
|  | * MLS category bitmap using the given DOI definition.  Returns zero on | 
|  | * success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_rbm_ntoh(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *net_cat, | 
|  | u32 net_cat_len, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  | int net_spot = -1; | 
|  | u32 host_spot = CIPSO_V4_INV_CAT; | 
|  | u32 net_clen_bits = net_cat_len * 8; | 
|  | u32 net_cat_size = 0; | 
|  | u32 *net_cat_array = NULL; | 
|  |  | 
|  | if (doi_def->type == CIPSO_V4_MAP_TRANS) { | 
|  | net_cat_size = doi_def->map.std->cat.cipso_size; | 
|  | net_cat_array = doi_def->map.std->cat.cipso; | 
|  | } | 
|  |  | 
|  | for (;;) { | 
|  | net_spot = cipso_v4_bitmap_walk(net_cat, | 
|  | net_clen_bits, | 
|  | net_spot + 1, | 
|  | 1); | 
|  | if (net_spot < 0) { | 
|  | if (net_spot == -2) | 
|  | return -EFAULT; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | switch (doi_def->type) { | 
|  | case CIPSO_V4_MAP_PASS: | 
|  | host_spot = net_spot; | 
|  | break; | 
|  | case CIPSO_V4_MAP_TRANS: | 
|  | if (net_spot >= net_cat_size) | 
|  | return -EPERM; | 
|  | host_spot = net_cat_array[net_spot]; | 
|  | if (host_spot >= CIPSO_V4_INV_CAT) | 
|  | return -EPERM; | 
|  | break; | 
|  | } | 
|  | ret_val = netlbl_secattr_catmap_setbit(secattr->attr.mls.cat, | 
|  | host_spot, | 
|  | GFP_ATOMIC); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_enum_valid - Checks to see if the categories are valid | 
|  | * @doi_def: the DOI definition | 
|  | * @enumcat: category list | 
|  | * @enumcat_len: length of the category list in bytes | 
|  | * | 
|  | * Description: | 
|  | * Checks the given categories against the given DOI definition and returns a | 
|  | * negative value if any of the categories do not have a valid mapping and a | 
|  | * zero value if all of the categories are valid. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_enum_valid(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *enumcat, | 
|  | u32 enumcat_len) | 
|  | { | 
|  | u16 cat; | 
|  | int cat_prev = -1; | 
|  | u32 iter; | 
|  |  | 
|  | if (doi_def->type != CIPSO_V4_MAP_PASS || enumcat_len & 0x01) | 
|  | return -EFAULT; | 
|  |  | 
|  | for (iter = 0; iter < enumcat_len; iter += 2) { | 
|  | cat = get_unaligned_be16(&enumcat[iter]); | 
|  | if (cat <= cat_prev) | 
|  | return -EFAULT; | 
|  | cat_prev = cat; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_enum_hton - Perform a category mapping from host to network | 
|  | * @doi_def: the DOI definition | 
|  | * @secattr: the security attributes | 
|  | * @net_cat: the zero'd out category list in network/CIPSO format | 
|  | * @net_cat_len: the length of the CIPSO category list in bytes | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a local MLS category bitmap to the | 
|  | * correct CIPSO category list using the given DOI definition.   Returns the | 
|  | * size in bytes of the network category bitmap on success, negative values | 
|  | * otherwise. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_enum_hton(const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr, | 
|  | unsigned char *net_cat, | 
|  | u32 net_cat_len) | 
|  | { | 
|  | int cat = -1; | 
|  | u32 cat_iter = 0; | 
|  |  | 
|  | for (;;) { | 
|  | cat = netlbl_secattr_catmap_walk(secattr->attr.mls.cat, | 
|  | cat + 1); | 
|  | if (cat < 0) | 
|  | break; | 
|  | if ((cat_iter + 2) > net_cat_len) | 
|  | return -ENOSPC; | 
|  |  | 
|  | *((__be16 *)&net_cat[cat_iter]) = htons(cat); | 
|  | cat_iter += 2; | 
|  | } | 
|  |  | 
|  | return cat_iter; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_enum_ntoh - Perform a category mapping from network to host | 
|  | * @doi_def: the DOI definition | 
|  | * @net_cat: the category list in network/CIPSO format | 
|  | * @net_cat_len: the length of the CIPSO bitmap in bytes | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a CIPSO category list to the correct | 
|  | * local MLS category bitmap using the given DOI definition.  Returns zero on | 
|  | * success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_enum_ntoh(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *net_cat, | 
|  | u32 net_cat_len, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  | u32 iter; | 
|  |  | 
|  | for (iter = 0; iter < net_cat_len; iter += 2) { | 
|  | ret_val = netlbl_secattr_catmap_setbit(secattr->attr.mls.cat, | 
|  | get_unaligned_be16(&net_cat[iter]), | 
|  | GFP_ATOMIC); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_rng_valid - Checks to see if the categories are valid | 
|  | * @doi_def: the DOI definition | 
|  | * @rngcat: category list | 
|  | * @rngcat_len: length of the category list in bytes | 
|  | * | 
|  | * Description: | 
|  | * Checks the given categories against the given DOI definition and returns a | 
|  | * negative value if any of the categories do not have a valid mapping and a | 
|  | * zero value if all of the categories are valid. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_rng_valid(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *rngcat, | 
|  | u32 rngcat_len) | 
|  | { | 
|  | u16 cat_high; | 
|  | u16 cat_low; | 
|  | u32 cat_prev = CIPSO_V4_MAX_REM_CATS + 1; | 
|  | u32 iter; | 
|  |  | 
|  | if (doi_def->type != CIPSO_V4_MAP_PASS || rngcat_len & 0x01) | 
|  | return -EFAULT; | 
|  |  | 
|  | for (iter = 0; iter < rngcat_len; iter += 4) { | 
|  | cat_high = get_unaligned_be16(&rngcat[iter]); | 
|  | if ((iter + 4) <= rngcat_len) | 
|  | cat_low = get_unaligned_be16(&rngcat[iter + 2]); | 
|  | else | 
|  | cat_low = 0; | 
|  |  | 
|  | if (cat_high > cat_prev) | 
|  | return -EFAULT; | 
|  |  | 
|  | cat_prev = cat_low; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_rng_hton - Perform a category mapping from host to network | 
|  | * @doi_def: the DOI definition | 
|  | * @secattr: the security attributes | 
|  | * @net_cat: the zero'd out category list in network/CIPSO format | 
|  | * @net_cat_len: the length of the CIPSO category list in bytes | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a local MLS category bitmap to the | 
|  | * correct CIPSO category list using the given DOI definition.   Returns the | 
|  | * size in bytes of the network category bitmap on success, negative values | 
|  | * otherwise. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_rng_hton(const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr, | 
|  | unsigned char *net_cat, | 
|  | u32 net_cat_len) | 
|  | { | 
|  | int iter = -1; | 
|  | u16 array[CIPSO_V4_TAG_RNG_CAT_MAX * 2]; | 
|  | u32 array_cnt = 0; | 
|  | u32 cat_size = 0; | 
|  |  | 
|  | /* make sure we don't overflow the 'array[]' variable */ | 
|  | if (net_cat_len > | 
|  | (CIPSO_V4_OPT_LEN_MAX - CIPSO_V4_HDR_LEN - CIPSO_V4_TAG_RNG_BLEN)) | 
|  | return -ENOSPC; | 
|  |  | 
|  | for (;;) { | 
|  | iter = netlbl_secattr_catmap_walk(secattr->attr.mls.cat, | 
|  | iter + 1); | 
|  | if (iter < 0) | 
|  | break; | 
|  | cat_size += (iter == 0 ? 0 : sizeof(u16)); | 
|  | if (cat_size > net_cat_len) | 
|  | return -ENOSPC; | 
|  | array[array_cnt++] = iter; | 
|  |  | 
|  | iter = netlbl_secattr_catmap_walk_rng(secattr->attr.mls.cat, | 
|  | iter); | 
|  | if (iter < 0) | 
|  | return -EFAULT; | 
|  | cat_size += sizeof(u16); | 
|  | if (cat_size > net_cat_len) | 
|  | return -ENOSPC; | 
|  | array[array_cnt++] = iter; | 
|  | } | 
|  |  | 
|  | for (iter = 0; array_cnt > 0;) { | 
|  | *((__be16 *)&net_cat[iter]) = htons(array[--array_cnt]); | 
|  | iter += 2; | 
|  | array_cnt--; | 
|  | if (array[array_cnt] != 0) { | 
|  | *((__be16 *)&net_cat[iter]) = htons(array[array_cnt]); | 
|  | iter += 2; | 
|  | } | 
|  | } | 
|  |  | 
|  | return cat_size; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_map_cat_rng_ntoh - Perform a category mapping from network to host | 
|  | * @doi_def: the DOI definition | 
|  | * @net_cat: the category list in network/CIPSO format | 
|  | * @net_cat_len: the length of the CIPSO bitmap in bytes | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Perform a label mapping to translate a CIPSO category list to the correct | 
|  | * local MLS category bitmap using the given DOI definition.  Returns zero on | 
|  | * success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_map_cat_rng_ntoh(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *net_cat, | 
|  | u32 net_cat_len, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  | u32 net_iter; | 
|  | u16 cat_low; | 
|  | u16 cat_high; | 
|  |  | 
|  | for (net_iter = 0; net_iter < net_cat_len; net_iter += 4) { | 
|  | cat_high = get_unaligned_be16(&net_cat[net_iter]); | 
|  | if ((net_iter + 4) <= net_cat_len) | 
|  | cat_low = get_unaligned_be16(&net_cat[net_iter + 2]); | 
|  | else | 
|  | cat_low = 0; | 
|  |  | 
|  | ret_val = netlbl_secattr_catmap_setrng(secattr->attr.mls.cat, | 
|  | cat_low, | 
|  | cat_high, | 
|  | GFP_ATOMIC); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Protocol Handling Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_gentag_hdr - Generate a CIPSO option header | 
|  | * @doi_def: the DOI definition | 
|  | * @len: the total tag length in bytes, not including this header | 
|  | * @buf: the CIPSO option buffer | 
|  | * | 
|  | * Description: | 
|  | * Write a CIPSO header into the beginning of @buffer. | 
|  | * | 
|  | */ | 
|  | static void cipso_v4_gentag_hdr(const struct cipso_v4_doi *doi_def, | 
|  | unsigned char *buf, | 
|  | u32 len) | 
|  | { | 
|  | buf[0] = IPOPT_CIPSO; | 
|  | buf[1] = CIPSO_V4_HDR_LEN + len; | 
|  | *(__be32 *)&buf[2] = htonl(doi_def->doi); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_gentag_rbm - Generate a CIPSO restricted bitmap tag (type #1) | 
|  | * @doi_def: the DOI definition | 
|  | * @secattr: the security attributes | 
|  | * @buffer: the option buffer | 
|  | * @buffer_len: length of buffer in bytes | 
|  | * | 
|  | * Description: | 
|  | * Generate a CIPSO option using the restricted bitmap tag, tag type #1.  The | 
|  | * actual buffer length may be larger than the indicated size due to | 
|  | * translation between host and network category bitmaps.  Returns the size of | 
|  | * the tag on success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_gentag_rbm(const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr, | 
|  | unsigned char *buffer, | 
|  | u32 buffer_len) | 
|  | { | 
|  | int ret_val; | 
|  | u32 tag_len; | 
|  | u32 level; | 
|  |  | 
|  | if ((secattr->flags & NETLBL_SECATTR_MLS_LVL) == 0) | 
|  | return -EPERM; | 
|  |  | 
|  | ret_val = cipso_v4_map_lvl_hton(doi_def, | 
|  | secattr->attr.mls.lvl, | 
|  | &level); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  |  | 
|  | if (secattr->flags & NETLBL_SECATTR_MLS_CAT) { | 
|  | ret_val = cipso_v4_map_cat_rbm_hton(doi_def, | 
|  | secattr, | 
|  | &buffer[4], | 
|  | buffer_len - 4); | 
|  | if (ret_val < 0) | 
|  | return ret_val; | 
|  |  | 
|  | /* This will send packets using the "optimized" format when | 
|  | * possibile as specified in  section 3.4.2.6 of the | 
|  | * CIPSO draft. */ | 
|  | if (cipso_v4_rbm_optfmt && ret_val > 0 && ret_val <= 10) | 
|  | tag_len = 14; | 
|  | else | 
|  | tag_len = 4 + ret_val; | 
|  | } else | 
|  | tag_len = 4; | 
|  |  | 
|  | buffer[0] = CIPSO_V4_TAG_RBITMAP; | 
|  | buffer[1] = tag_len; | 
|  | buffer[3] = level; | 
|  |  | 
|  | return tag_len; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_parsetag_rbm - Parse a CIPSO restricted bitmap tag | 
|  | * @doi_def: the DOI definition | 
|  | * @tag: the CIPSO tag | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Parse a CIPSO restricted bitmap tag (tag type #1) and return the security | 
|  | * attributes in @secattr.  Return zero on success, negatives values on | 
|  | * failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_parsetag_rbm(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *tag, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  | u8 tag_len = tag[1]; | 
|  | u32 level; | 
|  |  | 
|  | ret_val = cipso_v4_map_lvl_ntoh(doi_def, tag[3], &level); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  | secattr->attr.mls.lvl = level; | 
|  | secattr->flags |= NETLBL_SECATTR_MLS_LVL; | 
|  |  | 
|  | if (tag_len > 4) { | 
|  | secattr->attr.mls.cat = | 
|  | netlbl_secattr_catmap_alloc(GFP_ATOMIC); | 
|  | if (secattr->attr.mls.cat == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret_val = cipso_v4_map_cat_rbm_ntoh(doi_def, | 
|  | &tag[4], | 
|  | tag_len - 4, | 
|  | secattr); | 
|  | if (ret_val != 0) { | 
|  | netlbl_secattr_catmap_free(secattr->attr.mls.cat); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | secattr->flags |= NETLBL_SECATTR_MLS_CAT; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_gentag_enum - Generate a CIPSO enumerated tag (type #2) | 
|  | * @doi_def: the DOI definition | 
|  | * @secattr: the security attributes | 
|  | * @buffer: the option buffer | 
|  | * @buffer_len: length of buffer in bytes | 
|  | * | 
|  | * Description: | 
|  | * Generate a CIPSO option using the enumerated tag, tag type #2.  Returns the | 
|  | * size of the tag on success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_gentag_enum(const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr, | 
|  | unsigned char *buffer, | 
|  | u32 buffer_len) | 
|  | { | 
|  | int ret_val; | 
|  | u32 tag_len; | 
|  | u32 level; | 
|  |  | 
|  | if (!(secattr->flags & NETLBL_SECATTR_MLS_LVL)) | 
|  | return -EPERM; | 
|  |  | 
|  | ret_val = cipso_v4_map_lvl_hton(doi_def, | 
|  | secattr->attr.mls.lvl, | 
|  | &level); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  |  | 
|  | if (secattr->flags & NETLBL_SECATTR_MLS_CAT) { | 
|  | ret_val = cipso_v4_map_cat_enum_hton(doi_def, | 
|  | secattr, | 
|  | &buffer[4], | 
|  | buffer_len - 4); | 
|  | if (ret_val < 0) | 
|  | return ret_val; | 
|  |  | 
|  | tag_len = 4 + ret_val; | 
|  | } else | 
|  | tag_len = 4; | 
|  |  | 
|  | buffer[0] = CIPSO_V4_TAG_ENUM; | 
|  | buffer[1] = tag_len; | 
|  | buffer[3] = level; | 
|  |  | 
|  | return tag_len; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_parsetag_enum - Parse a CIPSO enumerated tag | 
|  | * @doi_def: the DOI definition | 
|  | * @tag: the CIPSO tag | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Parse a CIPSO enumerated tag (tag type #2) and return the security | 
|  | * attributes in @secattr.  Return zero on success, negatives values on | 
|  | * failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_parsetag_enum(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *tag, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  | u8 tag_len = tag[1]; | 
|  | u32 level; | 
|  |  | 
|  | ret_val = cipso_v4_map_lvl_ntoh(doi_def, tag[3], &level); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  | secattr->attr.mls.lvl = level; | 
|  | secattr->flags |= NETLBL_SECATTR_MLS_LVL; | 
|  |  | 
|  | if (tag_len > 4) { | 
|  | secattr->attr.mls.cat = | 
|  | netlbl_secattr_catmap_alloc(GFP_ATOMIC); | 
|  | if (secattr->attr.mls.cat == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret_val = cipso_v4_map_cat_enum_ntoh(doi_def, | 
|  | &tag[4], | 
|  | tag_len - 4, | 
|  | secattr); | 
|  | if (ret_val != 0) { | 
|  | netlbl_secattr_catmap_free(secattr->attr.mls.cat); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | secattr->flags |= NETLBL_SECATTR_MLS_CAT; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_gentag_rng - Generate a CIPSO ranged tag (type #5) | 
|  | * @doi_def: the DOI definition | 
|  | * @secattr: the security attributes | 
|  | * @buffer: the option buffer | 
|  | * @buffer_len: length of buffer in bytes | 
|  | * | 
|  | * Description: | 
|  | * Generate a CIPSO option using the ranged tag, tag type #5.  Returns the | 
|  | * size of the tag on success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_gentag_rng(const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr, | 
|  | unsigned char *buffer, | 
|  | u32 buffer_len) | 
|  | { | 
|  | int ret_val; | 
|  | u32 tag_len; | 
|  | u32 level; | 
|  |  | 
|  | if (!(secattr->flags & NETLBL_SECATTR_MLS_LVL)) | 
|  | return -EPERM; | 
|  |  | 
|  | ret_val = cipso_v4_map_lvl_hton(doi_def, | 
|  | secattr->attr.mls.lvl, | 
|  | &level); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  |  | 
|  | if (secattr->flags & NETLBL_SECATTR_MLS_CAT) { | 
|  | ret_val = cipso_v4_map_cat_rng_hton(doi_def, | 
|  | secattr, | 
|  | &buffer[4], | 
|  | buffer_len - 4); | 
|  | if (ret_val < 0) | 
|  | return ret_val; | 
|  |  | 
|  | tag_len = 4 + ret_val; | 
|  | } else | 
|  | tag_len = 4; | 
|  |  | 
|  | buffer[0] = CIPSO_V4_TAG_RANGE; | 
|  | buffer[1] = tag_len; | 
|  | buffer[3] = level; | 
|  |  | 
|  | return tag_len; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_parsetag_rng - Parse a CIPSO ranged tag | 
|  | * @doi_def: the DOI definition | 
|  | * @tag: the CIPSO tag | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Parse a CIPSO ranged tag (tag type #5) and return the security attributes | 
|  | * in @secattr.  Return zero on success, negatives values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_parsetag_rng(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *tag, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  | u8 tag_len = tag[1]; | 
|  | u32 level; | 
|  |  | 
|  | ret_val = cipso_v4_map_lvl_ntoh(doi_def, tag[3], &level); | 
|  | if (ret_val != 0) | 
|  | return ret_val; | 
|  | secattr->attr.mls.lvl = level; | 
|  | secattr->flags |= NETLBL_SECATTR_MLS_LVL; | 
|  |  | 
|  | if (tag_len > 4) { | 
|  | secattr->attr.mls.cat = | 
|  | netlbl_secattr_catmap_alloc(GFP_ATOMIC); | 
|  | if (secattr->attr.mls.cat == NULL) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ret_val = cipso_v4_map_cat_rng_ntoh(doi_def, | 
|  | &tag[4], | 
|  | tag_len - 4, | 
|  | secattr); | 
|  | if (ret_val != 0) { | 
|  | netlbl_secattr_catmap_free(secattr->attr.mls.cat); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | secattr->flags |= NETLBL_SECATTR_MLS_CAT; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_gentag_loc - Generate a CIPSO local tag (non-standard) | 
|  | * @doi_def: the DOI definition | 
|  | * @secattr: the security attributes | 
|  | * @buffer: the option buffer | 
|  | * @buffer_len: length of buffer in bytes | 
|  | * | 
|  | * Description: | 
|  | * Generate a CIPSO option using the local tag.  Returns the size of the tag | 
|  | * on success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_gentag_loc(const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr, | 
|  | unsigned char *buffer, | 
|  | u32 buffer_len) | 
|  | { | 
|  | if (!(secattr->flags & NETLBL_SECATTR_SECID)) | 
|  | return -EPERM; | 
|  |  | 
|  | buffer[0] = CIPSO_V4_TAG_LOCAL; | 
|  | buffer[1] = CIPSO_V4_TAG_LOC_BLEN; | 
|  | *(u32 *)&buffer[2] = secattr->attr.secid; | 
|  |  | 
|  | return CIPSO_V4_TAG_LOC_BLEN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_parsetag_loc - Parse a CIPSO local tag | 
|  | * @doi_def: the DOI definition | 
|  | * @tag: the CIPSO tag | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Parse a CIPSO local tag and return the security attributes in @secattr. | 
|  | * Return zero on success, negatives values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_parsetag_loc(const struct cipso_v4_doi *doi_def, | 
|  | const unsigned char *tag, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | secattr->attr.secid = *(u32 *)&tag[2]; | 
|  | secattr->flags |= NETLBL_SECATTR_SECID; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_validate - Validate a CIPSO option | 
|  | * @option: the start of the option, on error it is set to point to the error | 
|  | * | 
|  | * Description: | 
|  | * This routine is called to validate a CIPSO option, it checks all of the | 
|  | * fields to ensure that they are at least valid, see the draft snippet below | 
|  | * for details.  If the option is valid then a zero value is returned and | 
|  | * the value of @option is unchanged.  If the option is invalid then a | 
|  | * non-zero value is returned and @option is adjusted to point to the | 
|  | * offending portion of the option.  From the IETF draft ... | 
|  | * | 
|  | *  "If any field within the CIPSO options, such as the DOI identifier, is not | 
|  | *   recognized the IP datagram is discarded and an ICMP 'parameter problem' | 
|  | *   (type 12) is generated and returned.  The ICMP code field is set to 'bad | 
|  | *   parameter' (code 0) and the pointer is set to the start of the CIPSO field | 
|  | *   that is unrecognized." | 
|  | * | 
|  | */ | 
|  | int cipso_v4_validate(const struct sk_buff *skb, unsigned char **option) | 
|  | { | 
|  | unsigned char *opt = *option; | 
|  | unsigned char *tag; | 
|  | unsigned char opt_iter; | 
|  | unsigned char err_offset = 0; | 
|  | u8 opt_len; | 
|  | u8 tag_len; | 
|  | struct cipso_v4_doi *doi_def = NULL; | 
|  | u32 tag_iter; | 
|  |  | 
|  | /* caller already checks for length values that are too large */ | 
|  | opt_len = opt[1]; | 
|  | if (opt_len < 8) { | 
|  | err_offset = 1; | 
|  | goto validate_return; | 
|  | } | 
|  |  | 
|  | rcu_read_lock(); | 
|  | doi_def = cipso_v4_doi_search(get_unaligned_be32(&opt[2])); | 
|  | if (doi_def == NULL) { | 
|  | err_offset = 2; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | opt_iter = CIPSO_V4_HDR_LEN; | 
|  | tag = opt + opt_iter; | 
|  | while (opt_iter < opt_len) { | 
|  | for (tag_iter = 0; doi_def->tags[tag_iter] != tag[0];) | 
|  | if (doi_def->tags[tag_iter] == CIPSO_V4_TAG_INVALID || | 
|  | ++tag_iter == CIPSO_V4_TAG_MAXCNT) { | 
|  | err_offset = opt_iter; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | tag_len = tag[1]; | 
|  | if (tag_len > (opt_len - opt_iter)) { | 
|  | err_offset = opt_iter + 1; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | switch (tag[0]) { | 
|  | case CIPSO_V4_TAG_RBITMAP: | 
|  | if (tag_len < CIPSO_V4_TAG_RBM_BLEN) { | 
|  | err_offset = opt_iter + 1; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | /* We are already going to do all the verification | 
|  | * necessary at the socket layer so from our point of | 
|  | * view it is safe to turn these checks off (and less | 
|  | * work), however, the CIPSO draft says we should do | 
|  | * all the CIPSO validations here but it doesn't | 
|  | * really specify _exactly_ what we need to validate | 
|  | * ... so, just make it a sysctl tunable. */ | 
|  | if (cipso_v4_rbm_strictvalid) { | 
|  | if (cipso_v4_map_lvl_valid(doi_def, | 
|  | tag[3]) < 0) { | 
|  | err_offset = opt_iter + 3; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | if (tag_len > CIPSO_V4_TAG_RBM_BLEN && | 
|  | cipso_v4_map_cat_rbm_valid(doi_def, | 
|  | &tag[4], | 
|  | tag_len - 4) < 0) { | 
|  | err_offset = opt_iter + 4; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | } | 
|  | break; | 
|  | case CIPSO_V4_TAG_ENUM: | 
|  | if (tag_len < CIPSO_V4_TAG_ENUM_BLEN) { | 
|  | err_offset = opt_iter + 1; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | if (cipso_v4_map_lvl_valid(doi_def, | 
|  | tag[3]) < 0) { | 
|  | err_offset = opt_iter + 3; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | if (tag_len > CIPSO_V4_TAG_ENUM_BLEN && | 
|  | cipso_v4_map_cat_enum_valid(doi_def, | 
|  | &tag[4], | 
|  | tag_len - 4) < 0) { | 
|  | err_offset = opt_iter + 4; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | break; | 
|  | case CIPSO_V4_TAG_RANGE: | 
|  | if (tag_len < CIPSO_V4_TAG_RNG_BLEN) { | 
|  | err_offset = opt_iter + 1; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | if (cipso_v4_map_lvl_valid(doi_def, | 
|  | tag[3]) < 0) { | 
|  | err_offset = opt_iter + 3; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | if (tag_len > CIPSO_V4_TAG_RNG_BLEN && | 
|  | cipso_v4_map_cat_rng_valid(doi_def, | 
|  | &tag[4], | 
|  | tag_len - 4) < 0) { | 
|  | err_offset = opt_iter + 4; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | break; | 
|  | case CIPSO_V4_TAG_LOCAL: | 
|  | /* This is a non-standard tag that we only allow for | 
|  | * local connections, so if the incoming interface is | 
|  | * not the loopback device drop the packet. */ | 
|  | if (!(skb->dev->flags & IFF_LOOPBACK)) { | 
|  | err_offset = opt_iter; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | if (tag_len != CIPSO_V4_TAG_LOC_BLEN) { | 
|  | err_offset = opt_iter + 1; | 
|  | goto validate_return_locked; | 
|  | } | 
|  | break; | 
|  | default: | 
|  | err_offset = opt_iter; | 
|  | goto validate_return_locked; | 
|  | } | 
|  |  | 
|  | tag += tag_len; | 
|  | opt_iter += tag_len; | 
|  | } | 
|  |  | 
|  | validate_return_locked: | 
|  | rcu_read_unlock(); | 
|  | validate_return: | 
|  | *option = opt + err_offset; | 
|  | return err_offset; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_error - Send the correct reponse for a bad packet | 
|  | * @skb: the packet | 
|  | * @error: the error code | 
|  | * @gateway: CIPSO gateway flag | 
|  | * | 
|  | * Description: | 
|  | * Based on the error code given in @error, send an ICMP error message back to | 
|  | * the originating host.  From the IETF draft ... | 
|  | * | 
|  | *  "If the contents of the CIPSO [option] are valid but the security label is | 
|  | *   outside of the configured host or port label range, the datagram is | 
|  | *   discarded and an ICMP 'destination unreachable' (type 3) is generated and | 
|  | *   returned.  The code field of the ICMP is set to 'communication with | 
|  | *   destination network administratively prohibited' (code 9) or to | 
|  | *   'communication with destination host administratively prohibited' | 
|  | *   (code 10).  The value of the code is dependent on whether the originator | 
|  | *   of the ICMP message is acting as a CIPSO host or a CIPSO gateway.  The | 
|  | *   recipient of the ICMP message MUST be able to handle either value.  The | 
|  | *   same procedure is performed if a CIPSO [option] can not be added to an | 
|  | *   IP packet because it is too large to fit in the IP options area." | 
|  | * | 
|  | *  "If the error is triggered by receipt of an ICMP message, the message is | 
|  | *   discarded and no response is permitted (consistent with general ICMP | 
|  | *   processing rules)." | 
|  | * | 
|  | */ | 
|  | void cipso_v4_error(struct sk_buff *skb, int error, u32 gateway) | 
|  | { | 
|  | if (ip_hdr(skb)->protocol == IPPROTO_ICMP || error != -EACCES) | 
|  | return; | 
|  |  | 
|  | if (gateway) | 
|  | icmp_send(skb, ICMP_DEST_UNREACH, ICMP_NET_ANO, 0); | 
|  | else | 
|  | icmp_send(skb, ICMP_DEST_UNREACH, ICMP_HOST_ANO, 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_genopt - Generate a CIPSO option | 
|  | * @buf: the option buffer | 
|  | * @buf_len: the size of opt_buf | 
|  | * @doi_def: the CIPSO DOI to use | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Generate a CIPSO option using the DOI definition and security attributes | 
|  | * passed to the function.  Returns the length of the option on success and | 
|  | * negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_genopt(unsigned char *buf, u32 buf_len, | 
|  | const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  | u32 iter; | 
|  |  | 
|  | if (buf_len <= CIPSO_V4_HDR_LEN) | 
|  | return -ENOSPC; | 
|  |  | 
|  | /* XXX - This code assumes only one tag per CIPSO option which isn't | 
|  | * really a good assumption to make but since we only support the MAC | 
|  | * tags right now it is a safe assumption. */ | 
|  | iter = 0; | 
|  | do { | 
|  | memset(buf, 0, buf_len); | 
|  | switch (doi_def->tags[iter]) { | 
|  | case CIPSO_V4_TAG_RBITMAP: | 
|  | ret_val = cipso_v4_gentag_rbm(doi_def, | 
|  | secattr, | 
|  | &buf[CIPSO_V4_HDR_LEN], | 
|  | buf_len - CIPSO_V4_HDR_LEN); | 
|  | break; | 
|  | case CIPSO_V4_TAG_ENUM: | 
|  | ret_val = cipso_v4_gentag_enum(doi_def, | 
|  | secattr, | 
|  | &buf[CIPSO_V4_HDR_LEN], | 
|  | buf_len - CIPSO_V4_HDR_LEN); | 
|  | break; | 
|  | case CIPSO_V4_TAG_RANGE: | 
|  | ret_val = cipso_v4_gentag_rng(doi_def, | 
|  | secattr, | 
|  | &buf[CIPSO_V4_HDR_LEN], | 
|  | buf_len - CIPSO_V4_HDR_LEN); | 
|  | break; | 
|  | case CIPSO_V4_TAG_LOCAL: | 
|  | ret_val = cipso_v4_gentag_loc(doi_def, | 
|  | secattr, | 
|  | &buf[CIPSO_V4_HDR_LEN], | 
|  | buf_len - CIPSO_V4_HDR_LEN); | 
|  | break; | 
|  | default: | 
|  | return -EPERM; | 
|  | } | 
|  |  | 
|  | iter++; | 
|  | } while (ret_val < 0 && | 
|  | iter < CIPSO_V4_TAG_MAXCNT && | 
|  | doi_def->tags[iter] != CIPSO_V4_TAG_INVALID); | 
|  | if (ret_val < 0) | 
|  | return ret_val; | 
|  | cipso_v4_gentag_hdr(doi_def, buf, ret_val); | 
|  | return CIPSO_V4_HDR_LEN + ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_sock_setattr - Add a CIPSO option to a socket | 
|  | * @sk: the socket | 
|  | * @doi_def: the CIPSO DOI to use | 
|  | * @secattr: the specific security attributes of the socket | 
|  | * | 
|  | * Description: | 
|  | * Set the CIPSO option on the given socket using the DOI definition and | 
|  | * security attributes passed to the function.  This function requires | 
|  | * exclusive access to @sk, which means it either needs to be in the | 
|  | * process of being created or locked.  Returns zero on success and negative | 
|  | * values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_sock_setattr(struct sock *sk, | 
|  | const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val = -EPERM; | 
|  | unsigned char *buf = NULL; | 
|  | u32 buf_len; | 
|  | u32 opt_len; | 
|  | struct ip_options *opt = NULL; | 
|  | struct inet_sock *sk_inet; | 
|  | struct inet_connection_sock *sk_conn; | 
|  |  | 
|  | /* In the case of sock_create_lite(), the sock->sk field is not | 
|  | * defined yet but it is not a problem as the only users of these | 
|  | * "lite" PF_INET sockets are functions which do an accept() call | 
|  | * afterwards so we will label the socket as part of the accept(). */ | 
|  | if (sk == NULL) | 
|  | return 0; | 
|  |  | 
|  | /* We allocate the maximum CIPSO option size here so we are probably | 
|  | * being a little wasteful, but it makes our life _much_ easier later | 
|  | * on and after all we are only talking about 40 bytes. */ | 
|  | buf_len = CIPSO_V4_OPT_LEN_MAX; | 
|  | buf = kmalloc(buf_len, GFP_ATOMIC); | 
|  | if (buf == NULL) { | 
|  | ret_val = -ENOMEM; | 
|  | goto socket_setattr_failure; | 
|  | } | 
|  |  | 
|  | ret_val = cipso_v4_genopt(buf, buf_len, doi_def, secattr); | 
|  | if (ret_val < 0) | 
|  | goto socket_setattr_failure; | 
|  | buf_len = ret_val; | 
|  |  | 
|  | /* We can't use ip_options_get() directly because it makes a call to | 
|  | * ip_options_get_alloc() which allocates memory with GFP_KERNEL and | 
|  | * we won't always have CAP_NET_RAW even though we _always_ want to | 
|  | * set the IPOPT_CIPSO option. */ | 
|  | opt_len = (buf_len + 3) & ~3; | 
|  | opt = kzalloc(sizeof(*opt) + opt_len, GFP_ATOMIC); | 
|  | if (opt == NULL) { | 
|  | ret_val = -ENOMEM; | 
|  | goto socket_setattr_failure; | 
|  | } | 
|  | memcpy(opt->__data, buf, buf_len); | 
|  | opt->optlen = opt_len; | 
|  | opt->cipso = sizeof(struct iphdr); | 
|  | kfree(buf); | 
|  | buf = NULL; | 
|  |  | 
|  | sk_inet = inet_sk(sk); | 
|  | if (sk_inet->is_icsk) { | 
|  | sk_conn = inet_csk(sk); | 
|  | if (sk_inet->opt) | 
|  | sk_conn->icsk_ext_hdr_len -= sk_inet->opt->optlen; | 
|  | sk_conn->icsk_ext_hdr_len += opt->optlen; | 
|  | sk_conn->icsk_sync_mss(sk, sk_conn->icsk_pmtu_cookie); | 
|  | } | 
|  | opt = xchg(&sk_inet->opt, opt); | 
|  | kfree(opt); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | socket_setattr_failure: | 
|  | kfree(buf); | 
|  | kfree(opt); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_sock_delattr - Delete the CIPSO option from a socket | 
|  | * @sk: the socket | 
|  | * | 
|  | * Description: | 
|  | * Removes the CIPSO option from a socket, if present. | 
|  | * | 
|  | */ | 
|  | void cipso_v4_sock_delattr(struct sock *sk) | 
|  | { | 
|  | u8 hdr_delta; | 
|  | struct ip_options *opt; | 
|  | struct inet_sock *sk_inet; | 
|  |  | 
|  | sk_inet = inet_sk(sk); | 
|  | opt = sk_inet->opt; | 
|  | if (opt == NULL || opt->cipso == 0) | 
|  | return; | 
|  |  | 
|  | if (opt->srr || opt->rr || opt->ts || opt->router_alert) { | 
|  | u8 cipso_len; | 
|  | u8 cipso_off; | 
|  | unsigned char *cipso_ptr; | 
|  | int iter; | 
|  | int optlen_new; | 
|  |  | 
|  | cipso_off = opt->cipso - sizeof(struct iphdr); | 
|  | cipso_ptr = &opt->__data[cipso_off]; | 
|  | cipso_len = cipso_ptr[1]; | 
|  |  | 
|  | if (opt->srr > opt->cipso) | 
|  | opt->srr -= cipso_len; | 
|  | if (opt->rr > opt->cipso) | 
|  | opt->rr -= cipso_len; | 
|  | if (opt->ts > opt->cipso) | 
|  | opt->ts -= cipso_len; | 
|  | if (opt->router_alert > opt->cipso) | 
|  | opt->router_alert -= cipso_len; | 
|  | opt->cipso = 0; | 
|  |  | 
|  | memmove(cipso_ptr, cipso_ptr + cipso_len, | 
|  | opt->optlen - cipso_off - cipso_len); | 
|  |  | 
|  | /* determining the new total option length is tricky because of | 
|  | * the padding necessary, the only thing i can think to do at | 
|  | * this point is walk the options one-by-one, skipping the | 
|  | * padding at the end to determine the actual option size and | 
|  | * from there we can determine the new total option length */ | 
|  | iter = 0; | 
|  | optlen_new = 0; | 
|  | while (iter < opt->optlen) | 
|  | if (opt->__data[iter] != IPOPT_NOP) { | 
|  | iter += opt->__data[iter + 1]; | 
|  | optlen_new = iter; | 
|  | } else | 
|  | iter++; | 
|  | hdr_delta = opt->optlen; | 
|  | opt->optlen = (optlen_new + 3) & ~3; | 
|  | hdr_delta -= opt->optlen; | 
|  | } else { | 
|  | /* only the cipso option was present on the socket so we can | 
|  | * remove the entire option struct */ | 
|  | sk_inet->opt = NULL; | 
|  | hdr_delta = opt->optlen; | 
|  | kfree(opt); | 
|  | } | 
|  |  | 
|  | if (sk_inet->is_icsk && hdr_delta > 0) { | 
|  | struct inet_connection_sock *sk_conn = inet_csk(sk); | 
|  | sk_conn->icsk_ext_hdr_len -= hdr_delta; | 
|  | sk_conn->icsk_sync_mss(sk, sk_conn->icsk_pmtu_cookie); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_getattr - Helper function for the cipso_v4_*_getattr functions | 
|  | * @cipso: the CIPSO v4 option | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Inspect @cipso and return the security attributes in @secattr.  Returns zero | 
|  | * on success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int cipso_v4_getattr(const unsigned char *cipso, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val = -ENOMSG; | 
|  | u32 doi; | 
|  | struct cipso_v4_doi *doi_def; | 
|  |  | 
|  | if (cipso_v4_cache_check(cipso, cipso[1], secattr) == 0) | 
|  | return 0; | 
|  |  | 
|  | doi = get_unaligned_be32(&cipso[2]); | 
|  | rcu_read_lock(); | 
|  | doi_def = cipso_v4_doi_search(doi); | 
|  | if (doi_def == NULL) | 
|  | goto getattr_return; | 
|  | /* XXX - This code assumes only one tag per CIPSO option which isn't | 
|  | * really a good assumption to make but since we only support the MAC | 
|  | * tags right now it is a safe assumption. */ | 
|  | switch (cipso[6]) { | 
|  | case CIPSO_V4_TAG_RBITMAP: | 
|  | ret_val = cipso_v4_parsetag_rbm(doi_def, &cipso[6], secattr); | 
|  | break; | 
|  | case CIPSO_V4_TAG_ENUM: | 
|  | ret_val = cipso_v4_parsetag_enum(doi_def, &cipso[6], secattr); | 
|  | break; | 
|  | case CIPSO_V4_TAG_RANGE: | 
|  | ret_val = cipso_v4_parsetag_rng(doi_def, &cipso[6], secattr); | 
|  | break; | 
|  | case CIPSO_V4_TAG_LOCAL: | 
|  | ret_val = cipso_v4_parsetag_loc(doi_def, &cipso[6], secattr); | 
|  | break; | 
|  | } | 
|  | if (ret_val == 0) | 
|  | secattr->type = NETLBL_NLTYPE_CIPSOV4; | 
|  |  | 
|  | getattr_return: | 
|  | rcu_read_unlock(); | 
|  | return ret_val; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_sock_getattr - Get the security attributes from a sock | 
|  | * @sk: the sock | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Query @sk to see if there is a CIPSO option attached to the sock and if | 
|  | * there is return the CIPSO security attributes in @secattr.  This function | 
|  | * requires that @sk be locked, or privately held, but it does not do any | 
|  | * locking itself.  Returns zero on success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_sock_getattr(struct sock *sk, struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | struct ip_options *opt; | 
|  |  | 
|  | opt = inet_sk(sk)->opt; | 
|  | if (opt == NULL || opt->cipso == 0) | 
|  | return -ENOMSG; | 
|  |  | 
|  | return cipso_v4_getattr(opt->__data + opt->cipso - sizeof(struct iphdr), | 
|  | secattr); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_skbuff_setattr - Set the CIPSO option on a packet | 
|  | * @skb: the packet | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Set the CIPSO option on the given packet based on the security attributes. | 
|  | * Returns a pointer to the IP header on success and NULL on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_skbuff_setattr(struct sk_buff *skb, | 
|  | const struct cipso_v4_doi *doi_def, | 
|  | const struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | int ret_val; | 
|  | struct iphdr *iph; | 
|  | struct ip_options *opt = &IPCB(skb)->opt; | 
|  | unsigned char buf[CIPSO_V4_OPT_LEN_MAX]; | 
|  | u32 buf_len = CIPSO_V4_OPT_LEN_MAX; | 
|  | u32 opt_len; | 
|  | int len_delta; | 
|  |  | 
|  | ret_val = cipso_v4_genopt(buf, buf_len, doi_def, secattr); | 
|  | if (ret_val < 0) | 
|  | return ret_val; | 
|  | buf_len = ret_val; | 
|  | opt_len = (buf_len + 3) & ~3; | 
|  |  | 
|  | /* we overwrite any existing options to ensure that we have enough | 
|  | * room for the CIPSO option, the reason is that we _need_ to guarantee | 
|  | * that the security label is applied to the packet - we do the same | 
|  | * thing when using the socket options and it hasn't caused a problem, | 
|  | * if we need to we can always revisit this choice later */ | 
|  |  | 
|  | len_delta = opt_len - opt->optlen; | 
|  | /* if we don't ensure enough headroom we could panic on the skb_push() | 
|  | * call below so make sure we have enough, we are also "mangling" the | 
|  | * packet so we should probably do a copy-on-write call anyway */ | 
|  | ret_val = skb_cow(skb, skb_headroom(skb) + len_delta); | 
|  | if (ret_val < 0) | 
|  | return ret_val; | 
|  |  | 
|  | if (len_delta > 0) { | 
|  | /* we assume that the header + opt->optlen have already been | 
|  | * "pushed" in ip_options_build() or similar */ | 
|  | iph = ip_hdr(skb); | 
|  | skb_push(skb, len_delta); | 
|  | memmove((char *)iph - len_delta, iph, iph->ihl << 2); | 
|  | skb_reset_network_header(skb); | 
|  | iph = ip_hdr(skb); | 
|  | } else if (len_delta < 0) { | 
|  | iph = ip_hdr(skb); | 
|  | memset(iph + 1, IPOPT_NOP, opt->optlen); | 
|  | } else | 
|  | iph = ip_hdr(skb); | 
|  |  | 
|  | if (opt->optlen > 0) | 
|  | memset(opt, 0, sizeof(*opt)); | 
|  | opt->optlen = opt_len; | 
|  | opt->cipso = sizeof(struct iphdr); | 
|  | opt->is_changed = 1; | 
|  |  | 
|  | /* we have to do the following because we are being called from a | 
|  | * netfilter hook which means the packet already has had the header | 
|  | * fields populated and the checksum calculated - yes this means we | 
|  | * are doing more work than needed but we do it to keep the core | 
|  | * stack clean and tidy */ | 
|  | memcpy(iph + 1, buf, buf_len); | 
|  | if (opt_len > buf_len) | 
|  | memset((char *)(iph + 1) + buf_len, 0, opt_len - buf_len); | 
|  | if (len_delta != 0) { | 
|  | iph->ihl = 5 + (opt_len >> 2); | 
|  | iph->tot_len = htons(skb->len); | 
|  | } | 
|  | ip_send_check(iph); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_skbuff_delattr - Delete any CIPSO options from a packet | 
|  | * @skb: the packet | 
|  | * | 
|  | * Description: | 
|  | * Removes any and all CIPSO options from the given packet.  Returns zero on | 
|  | * success, negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_skbuff_delattr(struct sk_buff *skb) | 
|  | { | 
|  | int ret_val; | 
|  | struct iphdr *iph; | 
|  | struct ip_options *opt = &IPCB(skb)->opt; | 
|  | unsigned char *cipso_ptr; | 
|  |  | 
|  | if (opt->cipso == 0) | 
|  | return 0; | 
|  |  | 
|  | /* since we are changing the packet we should make a copy */ | 
|  | ret_val = skb_cow(skb, skb_headroom(skb)); | 
|  | if (ret_val < 0) | 
|  | return ret_val; | 
|  |  | 
|  | /* the easiest thing to do is just replace the cipso option with noop | 
|  | * options since we don't change the size of the packet, although we | 
|  | * still need to recalculate the checksum */ | 
|  |  | 
|  | iph = ip_hdr(skb); | 
|  | cipso_ptr = (unsigned char *)iph + opt->cipso; | 
|  | memset(cipso_ptr, IPOPT_NOOP, cipso_ptr[1]); | 
|  | opt->cipso = 0; | 
|  | opt->is_changed = 1; | 
|  |  | 
|  | ip_send_check(iph); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * cipso_v4_skbuff_getattr - Get the security attributes from the CIPSO option | 
|  | * @skb: the packet | 
|  | * @secattr: the security attributes | 
|  | * | 
|  | * Description: | 
|  | * Parse the given packet's CIPSO option and return the security attributes. | 
|  | * Returns zero on success and negative values on failure. | 
|  | * | 
|  | */ | 
|  | int cipso_v4_skbuff_getattr(const struct sk_buff *skb, | 
|  | struct netlbl_lsm_secattr *secattr) | 
|  | { | 
|  | return cipso_v4_getattr(CIPSO_V4_OPTPTR(skb), secattr); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Setup Functions | 
|  | */ | 
|  |  | 
|  | /** | 
|  | * cipso_v4_init - Initialize the CIPSO module | 
|  | * | 
|  | * Description: | 
|  | * Initialize the CIPSO module and prepare it for use.  Returns zero on success | 
|  | * and negative values on failure. | 
|  | * | 
|  | */ | 
|  | static int __init cipso_v4_init(void) | 
|  | { | 
|  | int ret_val; | 
|  |  | 
|  | ret_val = cipso_v4_cache_init(); | 
|  | if (ret_val != 0) | 
|  | panic("Failed to initialize the CIPSO/IPv4 cache (%d)\n", | 
|  | ret_val); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | subsys_initcall(cipso_v4_init); |