| /* | 
 |  * Xilinx Test Pattern Generator | 
 |  * | 
 |  * Copyright (C) 2013-2015 Ideas on Board | 
 |  * Copyright (C) 2013-2015 Xilinx, Inc. | 
 |  * | 
 |  * Contacts: Hyun Kwon <hyun.kwon@xilinx.com> | 
 |  *           Laurent Pinchart <laurent.pinchart@ideasonboard.com> | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License version 2 as | 
 |  * published by the Free Software Foundation. | 
 |  */ | 
 |  | 
 | #include <linux/device.h> | 
 | #include <linux/gpio/consumer.h> | 
 | #include <linux/module.h> | 
 | #include <linux/of.h> | 
 | #include <linux/platform_device.h> | 
 | #include <linux/xilinx-v4l2-controls.h> | 
 |  | 
 | #include <media/v4l2-async.h> | 
 | #include <media/v4l2-ctrls.h> | 
 | #include <media/v4l2-subdev.h> | 
 |  | 
 | #include "xilinx-vip.h" | 
 | #include "xilinx-vtc.h" | 
 |  | 
 | #define XTPG_CTRL_STATUS_SLAVE_ERROR		(1 << 16) | 
 | #define XTPG_CTRL_IRQ_SLAVE_ERROR		(1 << 16) | 
 |  | 
 | #define XTPG_PATTERN_CONTROL			0x0100 | 
 | #define XTPG_PATTERN_MASK			(0xf << 0) | 
 | #define XTPG_PATTERN_CONTROL_CROSS_HAIRS	(1 << 4) | 
 | #define XTPG_PATTERN_CONTROL_MOVING_BOX		(1 << 5) | 
 | #define XTPG_PATTERN_CONTROL_COLOR_MASK_SHIFT	6 | 
 | #define XTPG_PATTERN_CONTROL_COLOR_MASK_MASK	(0xf << 6) | 
 | #define XTPG_PATTERN_CONTROL_STUCK_PIXEL	(1 << 9) | 
 | #define XTPG_PATTERN_CONTROL_NOISE		(1 << 10) | 
 | #define XTPG_PATTERN_CONTROL_MOTION		(1 << 12) | 
 | #define XTPG_MOTION_SPEED			0x0104 | 
 | #define XTPG_CROSS_HAIRS			0x0108 | 
 | #define XTPG_CROSS_HAIRS_ROW_SHIFT		0 | 
 | #define XTPG_CROSS_HAIRS_ROW_MASK		(0xfff << 0) | 
 | #define XTPG_CROSS_HAIRS_COLUMN_SHIFT		16 | 
 | #define XTPG_CROSS_HAIRS_COLUMN_MASK		(0xfff << 16) | 
 | #define XTPG_ZPLATE_HOR_CONTROL			0x010c | 
 | #define XTPG_ZPLATE_VER_CONTROL			0x0110 | 
 | #define XTPG_ZPLATE_START_SHIFT			0 | 
 | #define XTPG_ZPLATE_START_MASK			(0xffff << 0) | 
 | #define XTPG_ZPLATE_SPEED_SHIFT			16 | 
 | #define XTPG_ZPLATE_SPEED_MASK			(0xffff << 16) | 
 | #define XTPG_BOX_SIZE				0x0114 | 
 | #define XTPG_BOX_COLOR				0x0118 | 
 | #define XTPG_STUCK_PIXEL_THRESH			0x011c | 
 | #define XTPG_NOISE_GAIN				0x0120 | 
 | #define XTPG_BAYER_PHASE			0x0124 | 
 | #define XTPG_BAYER_PHASE_RGGB			0 | 
 | #define XTPG_BAYER_PHASE_GRBG			1 | 
 | #define XTPG_BAYER_PHASE_GBRG			2 | 
 | #define XTPG_BAYER_PHASE_BGGR			3 | 
 | #define XTPG_BAYER_PHASE_OFF			4 | 
 |  | 
 | /* | 
 |  * The minimum blanking value is one clock cycle for the front porch, one clock | 
 |  * cycle for the sync pulse and one clock cycle for the back porch. | 
 |  */ | 
 | #define XTPG_MIN_HBLANK			3 | 
 | #define XTPG_MAX_HBLANK			(XVTC_MAX_HSIZE - XVIP_MIN_WIDTH) | 
 | #define XTPG_MIN_VBLANK			3 | 
 | #define XTPG_MAX_VBLANK			(XVTC_MAX_VSIZE - XVIP_MIN_HEIGHT) | 
 |  | 
 | /** | 
 |  * struct xtpg_device - Xilinx Test Pattern Generator device structure | 
 |  * @xvip: Xilinx Video IP device | 
 |  * @pads: media pads | 
 |  * @npads: number of pads (1 or 2) | 
 |  * @has_input: whether an input is connected to the sink pad | 
 |  * @formats: active V4L2 media bus format for each pad | 
 |  * @default_format: default V4L2 media bus format | 
 |  * @vip_format: format information corresponding to the active format | 
 |  * @bayer: boolean flag if TPG is set to any bayer format | 
 |  * @ctrl_handler: control handler | 
 |  * @hblank: horizontal blanking control | 
 |  * @vblank: vertical blanking control | 
 |  * @pattern: test pattern control | 
 |  * @streaming: is the video stream active | 
 |  * @vtc: video timing controller | 
 |  * @vtmux_gpio: video timing mux GPIO | 
 |  */ | 
 | struct xtpg_device { | 
 | 	struct xvip_device xvip; | 
 |  | 
 | 	struct media_pad pads[2]; | 
 | 	unsigned int npads; | 
 | 	bool has_input; | 
 |  | 
 | 	struct v4l2_mbus_framefmt formats[2]; | 
 | 	struct v4l2_mbus_framefmt default_format; | 
 | 	const struct xvip_video_format *vip_format; | 
 | 	bool bayer; | 
 |  | 
 | 	struct v4l2_ctrl_handler ctrl_handler; | 
 | 	struct v4l2_ctrl *hblank; | 
 | 	struct v4l2_ctrl *vblank; | 
 | 	struct v4l2_ctrl *pattern; | 
 | 	bool streaming; | 
 |  | 
 | 	struct xvtc_device *vtc; | 
 | 	struct gpio_desc *vtmux_gpio; | 
 | }; | 
 |  | 
 | static inline struct xtpg_device *to_tpg(struct v4l2_subdev *subdev) | 
 | { | 
 | 	return container_of(subdev, struct xtpg_device, xvip.subdev); | 
 | } | 
 |  | 
 | static u32 xtpg_get_bayer_phase(unsigned int code) | 
 | { | 
 | 	switch (code) { | 
 | 	case MEDIA_BUS_FMT_SRGGB8_1X8: | 
 | 		return XTPG_BAYER_PHASE_RGGB; | 
 | 	case MEDIA_BUS_FMT_SGRBG8_1X8: | 
 | 		return XTPG_BAYER_PHASE_GRBG; | 
 | 	case MEDIA_BUS_FMT_SGBRG8_1X8: | 
 | 		return XTPG_BAYER_PHASE_GBRG; | 
 | 	case MEDIA_BUS_FMT_SBGGR8_1X8: | 
 | 		return XTPG_BAYER_PHASE_BGGR; | 
 | 	default: | 
 | 		return XTPG_BAYER_PHASE_OFF; | 
 | 	} | 
 | } | 
 |  | 
 | static void __xtpg_update_pattern_control(struct xtpg_device *xtpg, | 
 | 					  bool passthrough, bool pattern) | 
 | { | 
 | 	u32 pattern_mask = (1 << (xtpg->pattern->maximum + 1)) - 1; | 
 |  | 
 | 	/* | 
 | 	 * If the TPG has no sink pad or no input connected to its sink pad | 
 | 	 * passthrough mode can't be enabled. | 
 | 	 */ | 
 | 	if (xtpg->npads == 1 || !xtpg->has_input) | 
 | 		passthrough = false; | 
 |  | 
 | 	/* If passthrough mode is allowed unmask bit 0. */ | 
 | 	if (passthrough) | 
 | 		pattern_mask &= ~1; | 
 |  | 
 | 	/* If test pattern mode is allowed unmask all other bits. */ | 
 | 	if (pattern) | 
 | 		pattern_mask &= 1; | 
 |  | 
 | 	__v4l2_ctrl_modify_range(xtpg->pattern, 0, xtpg->pattern->maximum, | 
 | 				 pattern_mask, pattern ? 9 : 0); | 
 | } | 
 |  | 
 | static void xtpg_update_pattern_control(struct xtpg_device *xtpg, | 
 | 					bool passthrough, bool pattern) | 
 | { | 
 | 	mutex_lock(xtpg->ctrl_handler.lock); | 
 | 	__xtpg_update_pattern_control(xtpg, passthrough, pattern); | 
 | 	mutex_unlock(xtpg->ctrl_handler.lock); | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * V4L2 Subdevice Video Operations | 
 |  */ | 
 |  | 
 | static int xtpg_s_stream(struct v4l2_subdev *subdev, int enable) | 
 | { | 
 | 	struct xtpg_device *xtpg = to_tpg(subdev); | 
 | 	unsigned int width = xtpg->formats[0].width; | 
 | 	unsigned int height = xtpg->formats[0].height; | 
 | 	bool passthrough; | 
 | 	u32 bayer_phase; | 
 |  | 
 | 	if (!enable) { | 
 | 		xvip_stop(&xtpg->xvip); | 
 | 		if (xtpg->vtc) | 
 | 			xvtc_generator_stop(xtpg->vtc); | 
 |  | 
 | 		xtpg_update_pattern_control(xtpg, true, true); | 
 | 		xtpg->streaming = false; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	xvip_set_frame_size(&xtpg->xvip, &xtpg->formats[0]); | 
 |  | 
 | 	if (xtpg->vtc) { | 
 | 		struct xvtc_config config = { | 
 | 			.hblank_start = width, | 
 | 			.hsync_start = width + 1, | 
 | 			.vblank_start = height, | 
 | 			.vsync_start = height + 1, | 
 | 		}; | 
 | 		unsigned int htotal; | 
 | 		unsigned int vtotal; | 
 |  | 
 | 		htotal = min_t(unsigned int, XVTC_MAX_HSIZE, | 
 | 			       v4l2_ctrl_g_ctrl(xtpg->hblank) + width); | 
 | 		vtotal = min_t(unsigned int, XVTC_MAX_VSIZE, | 
 | 			       v4l2_ctrl_g_ctrl(xtpg->vblank) + height); | 
 |  | 
 | 		config.hsync_end = htotal - 1; | 
 | 		config.hsize = htotal; | 
 | 		config.vsync_end = vtotal - 1; | 
 | 		config.vsize = vtotal; | 
 |  | 
 | 		xvtc_generator_start(xtpg->vtc, &config); | 
 | 	} | 
 |  | 
 | 	/* | 
 | 	 * Configure the bayer phase and video timing mux based on the | 
 | 	 * operation mode (passthrough or test pattern generation). The test | 
 | 	 * pattern can be modified by the control set handler, we thus need to | 
 | 	 * take the control lock here to avoid races. | 
 | 	 */ | 
 | 	mutex_lock(xtpg->ctrl_handler.lock); | 
 |  | 
 | 	xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, | 
 | 			 XTPG_PATTERN_MASK, xtpg->pattern->cur.val); | 
 |  | 
 | 	/* | 
 | 	 * Switching between passthrough and test pattern generation modes isn't | 
 | 	 * allowed during streaming, update the control range accordingly. | 
 | 	 */ | 
 | 	passthrough = xtpg->pattern->cur.val == 0; | 
 | 	__xtpg_update_pattern_control(xtpg, passthrough, !passthrough); | 
 |  | 
 | 	xtpg->streaming = true; | 
 |  | 
 | 	mutex_unlock(xtpg->ctrl_handler.lock); | 
 |  | 
 | 	/* | 
 | 	 * For TPG v5.0, the bayer phase needs to be off for the pass through | 
 | 	 * mode, otherwise the external input would be subsampled. | 
 | 	 */ | 
 | 	bayer_phase = passthrough ? XTPG_BAYER_PHASE_OFF | 
 | 		    : xtpg_get_bayer_phase(xtpg->formats[0].code); | 
 | 	xvip_write(&xtpg->xvip, XTPG_BAYER_PHASE, bayer_phase); | 
 |  | 
 | 	if (xtpg->vtmux_gpio) | 
 | 		gpiod_set_value_cansleep(xtpg->vtmux_gpio, !passthrough); | 
 |  | 
 | 	xvip_start(&xtpg->xvip); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * V4L2 Subdevice Pad Operations | 
 |  */ | 
 |  | 
 | static struct v4l2_mbus_framefmt * | 
 | __xtpg_get_pad_format(struct xtpg_device *xtpg, | 
 | 		      struct v4l2_subdev_pad_config *cfg, | 
 | 		      unsigned int pad, u32 which) | 
 | { | 
 | 	switch (which) { | 
 | 	case V4L2_SUBDEV_FORMAT_TRY: | 
 | 		return v4l2_subdev_get_try_format(&xtpg->xvip.subdev, cfg, pad); | 
 | 	case V4L2_SUBDEV_FORMAT_ACTIVE: | 
 | 		return &xtpg->formats[pad]; | 
 | 	default: | 
 | 		return NULL; | 
 | 	} | 
 | } | 
 |  | 
 | static int xtpg_get_format(struct v4l2_subdev *subdev, | 
 | 			   struct v4l2_subdev_pad_config *cfg, | 
 | 			   struct v4l2_subdev_format *fmt) | 
 | { | 
 | 	struct xtpg_device *xtpg = to_tpg(subdev); | 
 |  | 
 | 	fmt->format = *__xtpg_get_pad_format(xtpg, cfg, fmt->pad, fmt->which); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int xtpg_set_format(struct v4l2_subdev *subdev, | 
 | 			   struct v4l2_subdev_pad_config *cfg, | 
 | 			   struct v4l2_subdev_format *fmt) | 
 | { | 
 | 	struct xtpg_device *xtpg = to_tpg(subdev); | 
 | 	struct v4l2_mbus_framefmt *__format; | 
 | 	u32 bayer_phase; | 
 |  | 
 | 	__format = __xtpg_get_pad_format(xtpg, cfg, fmt->pad, fmt->which); | 
 |  | 
 | 	/* In two pads mode the source pad format is always identical to the | 
 | 	 * sink pad format. | 
 | 	 */ | 
 | 	if (xtpg->npads == 2 && fmt->pad == 1) { | 
 | 		fmt->format = *__format; | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* Bayer phase is configurable at runtime */ | 
 | 	if (xtpg->bayer) { | 
 | 		bayer_phase = xtpg_get_bayer_phase(fmt->format.code); | 
 | 		if (bayer_phase != XTPG_BAYER_PHASE_OFF) | 
 | 			__format->code = fmt->format.code; | 
 | 	} | 
 |  | 
 | 	xvip_set_format_size(__format, fmt); | 
 |  | 
 | 	fmt->format = *__format; | 
 |  | 
 | 	/* Propagate the format to the source pad. */ | 
 | 	if (xtpg->npads == 2) { | 
 | 		__format = __xtpg_get_pad_format(xtpg, cfg, 1, fmt->which); | 
 | 		*__format = fmt->format; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * V4L2 Subdevice Operations | 
 |  */ | 
 |  | 
 | static int xtpg_enum_frame_size(struct v4l2_subdev *subdev, | 
 | 				struct v4l2_subdev_pad_config *cfg, | 
 | 				struct v4l2_subdev_frame_size_enum *fse) | 
 | { | 
 | 	struct v4l2_mbus_framefmt *format; | 
 |  | 
 | 	format = v4l2_subdev_get_try_format(subdev, cfg, fse->pad); | 
 |  | 
 | 	if (fse->index || fse->code != format->code) | 
 | 		return -EINVAL; | 
 |  | 
 | 	/* Min / max values for pad 0 is always fixed in both one and two pads | 
 | 	 * modes. In two pads mode, the source pad(= 1) size is identical to | 
 | 	 * the sink pad size */ | 
 | 	if (fse->pad == 0) { | 
 | 		fse->min_width = XVIP_MIN_WIDTH; | 
 | 		fse->max_width = XVIP_MAX_WIDTH; | 
 | 		fse->min_height = XVIP_MIN_HEIGHT; | 
 | 		fse->max_height = XVIP_MAX_HEIGHT; | 
 | 	} else { | 
 | 		fse->min_width = format->width; | 
 | 		fse->max_width = format->width; | 
 | 		fse->min_height = format->height; | 
 | 		fse->max_height = format->height; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int xtpg_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) | 
 | { | 
 | 	struct xtpg_device *xtpg = to_tpg(subdev); | 
 | 	struct v4l2_mbus_framefmt *format; | 
 |  | 
 | 	format = v4l2_subdev_get_try_format(subdev, fh->pad, 0); | 
 | 	*format = xtpg->default_format; | 
 |  | 
 | 	if (xtpg->npads == 2) { | 
 | 		format = v4l2_subdev_get_try_format(subdev, fh->pad, 1); | 
 | 		*format = xtpg->default_format; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int xtpg_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh) | 
 | { | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int xtpg_s_ctrl(struct v4l2_ctrl *ctrl) | 
 | { | 
 | 	struct xtpg_device *xtpg = container_of(ctrl->handler, | 
 | 						struct xtpg_device, | 
 | 						ctrl_handler); | 
 | 	switch (ctrl->id) { | 
 | 	case V4L2_CID_TEST_PATTERN: | 
 | 		xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, | 
 | 				 XTPG_PATTERN_MASK, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_CROSS_HAIRS: | 
 | 		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, | 
 | 				XTPG_PATTERN_CONTROL_CROSS_HAIRS, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_MOVING_BOX: | 
 | 		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, | 
 | 				XTPG_PATTERN_CONTROL_MOVING_BOX, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_COLOR_MASK: | 
 | 		xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, | 
 | 				 XTPG_PATTERN_CONTROL_COLOR_MASK_MASK, | 
 | 				 ctrl->val << | 
 | 				 XTPG_PATTERN_CONTROL_COLOR_MASK_SHIFT); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_STUCK_PIXEL: | 
 | 		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, | 
 | 				XTPG_PATTERN_CONTROL_STUCK_PIXEL, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_NOISE: | 
 | 		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, | 
 | 				XTPG_PATTERN_CONTROL_NOISE, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_MOTION: | 
 | 		xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL, | 
 | 				XTPG_PATTERN_CONTROL_MOTION, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_MOTION_SPEED: | 
 | 		xvip_write(&xtpg->xvip, XTPG_MOTION_SPEED, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_CROSS_HAIR_ROW: | 
 | 		xvip_clr_and_set(&xtpg->xvip, XTPG_CROSS_HAIRS, | 
 | 				 XTPG_CROSS_HAIRS_ROW_MASK, | 
 | 				 ctrl->val << XTPG_CROSS_HAIRS_ROW_SHIFT); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_CROSS_HAIR_COLUMN: | 
 | 		xvip_clr_and_set(&xtpg->xvip, XTPG_CROSS_HAIRS, | 
 | 				 XTPG_CROSS_HAIRS_COLUMN_MASK, | 
 | 				 ctrl->val << XTPG_CROSS_HAIRS_COLUMN_SHIFT); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_ZPLATE_HOR_START: | 
 | 		xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_HOR_CONTROL, | 
 | 				 XTPG_ZPLATE_START_MASK, | 
 | 				 ctrl->val << XTPG_ZPLATE_START_SHIFT); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_ZPLATE_HOR_SPEED: | 
 | 		xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_HOR_CONTROL, | 
 | 				 XTPG_ZPLATE_SPEED_MASK, | 
 | 				 ctrl->val << XTPG_ZPLATE_SPEED_SHIFT); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_ZPLATE_VER_START: | 
 | 		xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_VER_CONTROL, | 
 | 				 XTPG_ZPLATE_START_MASK, | 
 | 				 ctrl->val << XTPG_ZPLATE_START_SHIFT); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_ZPLATE_VER_SPEED: | 
 | 		xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_VER_CONTROL, | 
 | 				 XTPG_ZPLATE_SPEED_MASK, | 
 | 				 ctrl->val << XTPG_ZPLATE_SPEED_SHIFT); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_BOX_SIZE: | 
 | 		xvip_write(&xtpg->xvip, XTPG_BOX_SIZE, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_BOX_COLOR: | 
 | 		xvip_write(&xtpg->xvip, XTPG_BOX_COLOR, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_STUCK_PIXEL_THRESH: | 
 | 		xvip_write(&xtpg->xvip, XTPG_STUCK_PIXEL_THRESH, ctrl->val); | 
 | 		return 0; | 
 | 	case V4L2_CID_XILINX_TPG_NOISE_GAIN: | 
 | 		xvip_write(&xtpg->xvip, XTPG_NOISE_GAIN, ctrl->val); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct v4l2_ctrl_ops xtpg_ctrl_ops = { | 
 | 	.s_ctrl	= xtpg_s_ctrl, | 
 | }; | 
 |  | 
 | static struct v4l2_subdev_core_ops xtpg_core_ops = { | 
 | }; | 
 |  | 
 | static struct v4l2_subdev_video_ops xtpg_video_ops = { | 
 | 	.s_stream = xtpg_s_stream, | 
 | }; | 
 |  | 
 | static struct v4l2_subdev_pad_ops xtpg_pad_ops = { | 
 | 	.enum_mbus_code		= xvip_enum_mbus_code, | 
 | 	.enum_frame_size	= xtpg_enum_frame_size, | 
 | 	.get_fmt		= xtpg_get_format, | 
 | 	.set_fmt		= xtpg_set_format, | 
 | }; | 
 |  | 
 | static struct v4l2_subdev_ops xtpg_ops = { | 
 | 	.core   = &xtpg_core_ops, | 
 | 	.video  = &xtpg_video_ops, | 
 | 	.pad    = &xtpg_pad_ops, | 
 | }; | 
 |  | 
 | static const struct v4l2_subdev_internal_ops xtpg_internal_ops = { | 
 | 	.open	= xtpg_open, | 
 | 	.close	= xtpg_close, | 
 | }; | 
 |  | 
 | /* | 
 |  * Control Config | 
 |  */ | 
 |  | 
 | static const char *const xtpg_pattern_strings[] = { | 
 | 	"Passthrough", | 
 | 	"Horizontal Ramp", | 
 | 	"Vertical Ramp", | 
 | 	"Temporal Ramp", | 
 | 	"Solid Red", | 
 | 	"Solid Green", | 
 | 	"Solid Blue", | 
 | 	"Solid Black", | 
 | 	"Solid White", | 
 | 	"Color Bars", | 
 | 	"Zone Plate", | 
 | 	"Tartan Color Bars", | 
 | 	"Cross Hatch", | 
 | 	"None", | 
 | 	"Vertical/Horizontal Ramps", | 
 | 	"Black/White Checker Board", | 
 | }; | 
 |  | 
 | static struct v4l2_ctrl_config xtpg_ctrls[] = { | 
 | 	{ | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_CROSS_HAIRS, | 
 | 		.name	= "Test Pattern: Cross Hairs", | 
 | 		.type	= V4L2_CTRL_TYPE_BOOLEAN, | 
 | 		.min	= false, | 
 | 		.max	= true, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_MOVING_BOX, | 
 | 		.name	= "Test Pattern: Moving Box", | 
 | 		.type	= V4L2_CTRL_TYPE_BOOLEAN, | 
 | 		.min	= false, | 
 | 		.max	= true, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_COLOR_MASK, | 
 | 		.name	= "Test Pattern: Color Mask", | 
 | 		.type	= V4L2_CTRL_TYPE_BITMASK, | 
 | 		.min	= 0, | 
 | 		.max	= 0xf, | 
 | 		.def	= 0, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_STUCK_PIXEL, | 
 | 		.name	= "Test Pattern: Stuck Pixel", | 
 | 		.type	= V4L2_CTRL_TYPE_BOOLEAN, | 
 | 		.min	= false, | 
 | 		.max	= true, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_NOISE, | 
 | 		.name	= "Test Pattern: Noise", | 
 | 		.type	= V4L2_CTRL_TYPE_BOOLEAN, | 
 | 		.min	= false, | 
 | 		.max	= true, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_MOTION, | 
 | 		.name	= "Test Pattern: Motion", | 
 | 		.type	= V4L2_CTRL_TYPE_BOOLEAN, | 
 | 		.min	= false, | 
 | 		.max	= true, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_MOTION_SPEED, | 
 | 		.name	= "Test Pattern: Motion Speed", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 8) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 4, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_CROSS_HAIR_ROW, | 
 | 		.name	= "Test Pattern: Cross Hairs Row", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 12) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 0x64, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_CROSS_HAIR_COLUMN, | 
 | 		.name	= "Test Pattern: Cross Hairs Column", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 12) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 0x64, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_ZPLATE_HOR_START, | 
 | 		.name	= "Test Pattern: Zplate Horizontal Start Pos", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 16) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 0x1e, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_ZPLATE_HOR_SPEED, | 
 | 		.name	= "Test Pattern: Zplate Horizontal Speed", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 16) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_ZPLATE_VER_START, | 
 | 		.name	= "Test Pattern: Zplate Vertical Start Pos", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 16) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 1, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_ZPLATE_VER_SPEED, | 
 | 		.name	= "Test Pattern: Zplate Vertical Speed", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 16) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_BOX_SIZE, | 
 | 		.name	= "Test Pattern: Box Size", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 12) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 0x32, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_BOX_COLOR, | 
 | 		.name	= "Test Pattern: Box Color(RGB)", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 24) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_STUCK_PIXEL_THRESH, | 
 | 		.name	= "Test Pattern: Stuck Pixel threshold", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 16) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, { | 
 | 		.ops	= &xtpg_ctrl_ops, | 
 | 		.id	= V4L2_CID_XILINX_TPG_NOISE_GAIN, | 
 | 		.name	= "Test Pattern: Noise Gain", | 
 | 		.type	= V4L2_CTRL_TYPE_INTEGER, | 
 | 		.min	= 0, | 
 | 		.max	= (1 << 8) - 1, | 
 | 		.step	= 1, | 
 | 		.def	= 0, | 
 | 		.flags	= V4L2_CTRL_FLAG_SLIDER, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * Media Operations | 
 |  */ | 
 |  | 
 | static const struct media_entity_operations xtpg_media_ops = { | 
 | 	.link_validate = v4l2_subdev_link_validate, | 
 | }; | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * Power Management | 
 |  */ | 
 |  | 
 | static int __maybe_unused xtpg_pm_suspend(struct device *dev) | 
 | { | 
 | 	struct xtpg_device *xtpg = dev_get_drvdata(dev); | 
 |  | 
 | 	xvip_suspend(&xtpg->xvip); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int __maybe_unused xtpg_pm_resume(struct device *dev) | 
 | { | 
 | 	struct xtpg_device *xtpg = dev_get_drvdata(dev); | 
 |  | 
 | 	xvip_resume(&xtpg->xvip); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ----------------------------------------------------------------------------- | 
 |  * Platform Device Driver | 
 |  */ | 
 |  | 
 | static int xtpg_parse_of(struct xtpg_device *xtpg) | 
 | { | 
 | 	struct device *dev = xtpg->xvip.dev; | 
 | 	struct device_node *node = xtpg->xvip.dev->of_node; | 
 | 	struct device_node *ports; | 
 | 	struct device_node *port; | 
 | 	unsigned int nports = 0; | 
 | 	bool has_endpoint = false; | 
 |  | 
 | 	ports = of_get_child_by_name(node, "ports"); | 
 | 	if (ports == NULL) | 
 | 		ports = node; | 
 |  | 
 | 	for_each_child_of_node(ports, port) { | 
 | 		const struct xvip_video_format *format; | 
 | 		struct device_node *endpoint; | 
 |  | 
 | 		if (!port->name || of_node_cmp(port->name, "port")) | 
 | 			continue; | 
 |  | 
 | 		format = xvip_of_get_format(port); | 
 | 		if (IS_ERR(format)) { | 
 | 			dev_err(dev, "invalid format in DT"); | 
 | 			return PTR_ERR(format); | 
 | 		} | 
 |  | 
 | 		/* Get and check the format description */ | 
 | 		if (!xtpg->vip_format) { | 
 | 			xtpg->vip_format = format; | 
 | 		} else if (xtpg->vip_format != format) { | 
 | 			dev_err(dev, "in/out format mismatch in DT"); | 
 | 			return -EINVAL; | 
 | 		} | 
 |  | 
 | 		if (nports == 0) { | 
 | 			endpoint = of_get_next_child(port, NULL); | 
 | 			if (endpoint) | 
 | 				has_endpoint = true; | 
 | 			of_node_put(endpoint); | 
 | 		} | 
 |  | 
 | 		/* Count the number of ports. */ | 
 | 		nports++; | 
 | 	} | 
 |  | 
 | 	if (nports != 1 && nports != 2) { | 
 | 		dev_err(dev, "invalid number of ports %u\n", nports); | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	xtpg->npads = nports; | 
 | 	if (nports == 2 && has_endpoint) | 
 | 		xtpg->has_input = true; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int xtpg_probe(struct platform_device *pdev) | 
 | { | 
 | 	struct v4l2_subdev *subdev; | 
 | 	struct xtpg_device *xtpg; | 
 | 	u32 i, bayer_phase; | 
 | 	int ret; | 
 |  | 
 | 	xtpg = devm_kzalloc(&pdev->dev, sizeof(*xtpg), GFP_KERNEL); | 
 | 	if (!xtpg) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	xtpg->xvip.dev = &pdev->dev; | 
 |  | 
 | 	ret = xtpg_parse_of(xtpg); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = xvip_init_resources(&xtpg->xvip); | 
 | 	if (ret < 0) | 
 | 		return ret; | 
 |  | 
 | 	xtpg->vtmux_gpio = devm_gpiod_get_optional(&pdev->dev, "timing", | 
 | 						   GPIOD_OUT_HIGH); | 
 | 	if (IS_ERR(xtpg->vtmux_gpio)) { | 
 | 		ret = PTR_ERR(xtpg->vtmux_gpio); | 
 | 		goto error_resource; | 
 | 	} | 
 |  | 
 | 	xtpg->vtc = xvtc_of_get(pdev->dev.of_node); | 
 | 	if (IS_ERR(xtpg->vtc)) { | 
 | 		ret = PTR_ERR(xtpg->vtc); | 
 | 		goto error_resource; | 
 | 	} | 
 |  | 
 | 	/* Reset and initialize the core */ | 
 | 	xvip_reset(&xtpg->xvip); | 
 |  | 
 | 	/* Initialize V4L2 subdevice and media entity. Pad numbers depend on the | 
 | 	 * number of pads. | 
 | 	 */ | 
 | 	if (xtpg->npads == 2) { | 
 | 		xtpg->pads[0].flags = MEDIA_PAD_FL_SINK; | 
 | 		xtpg->pads[1].flags = MEDIA_PAD_FL_SOURCE; | 
 | 	} else { | 
 | 		xtpg->pads[0].flags = MEDIA_PAD_FL_SOURCE; | 
 | 	} | 
 |  | 
 | 	/* Initialize the default format */ | 
 | 	xtpg->default_format.code = xtpg->vip_format->code; | 
 | 	xtpg->default_format.field = V4L2_FIELD_NONE; | 
 | 	xtpg->default_format.colorspace = V4L2_COLORSPACE_SRGB; | 
 | 	xvip_get_frame_size(&xtpg->xvip, &xtpg->default_format); | 
 |  | 
 | 	bayer_phase = xtpg_get_bayer_phase(xtpg->vip_format->code); | 
 | 	if (bayer_phase != XTPG_BAYER_PHASE_OFF) | 
 | 		xtpg->bayer = true; | 
 |  | 
 | 	xtpg->formats[0] = xtpg->default_format; | 
 | 	if (xtpg->npads == 2) | 
 | 		xtpg->formats[1] = xtpg->default_format; | 
 |  | 
 | 	/* Initialize V4L2 subdevice and media entity */ | 
 | 	subdev = &xtpg->xvip.subdev; | 
 | 	v4l2_subdev_init(subdev, &xtpg_ops); | 
 | 	subdev->dev = &pdev->dev; | 
 | 	subdev->internal_ops = &xtpg_internal_ops; | 
 | 	strlcpy(subdev->name, dev_name(&pdev->dev), sizeof(subdev->name)); | 
 | 	v4l2_set_subdevdata(subdev, xtpg); | 
 | 	subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; | 
 | 	subdev->entity.ops = &xtpg_media_ops; | 
 |  | 
 | 	ret = media_entity_init(&subdev->entity, xtpg->npads, xtpg->pads, 0); | 
 | 	if (ret < 0) | 
 | 		goto error; | 
 |  | 
 | 	v4l2_ctrl_handler_init(&xtpg->ctrl_handler, 3 + ARRAY_SIZE(xtpg_ctrls)); | 
 |  | 
 | 	xtpg->vblank = v4l2_ctrl_new_std(&xtpg->ctrl_handler, &xtpg_ctrl_ops, | 
 | 					 V4L2_CID_VBLANK, XTPG_MIN_VBLANK, | 
 | 					 XTPG_MAX_VBLANK, 1, 100); | 
 | 	xtpg->hblank = v4l2_ctrl_new_std(&xtpg->ctrl_handler, &xtpg_ctrl_ops, | 
 | 					 V4L2_CID_HBLANK, XTPG_MIN_HBLANK, | 
 | 					 XTPG_MAX_HBLANK, 1, 100); | 
 | 	xtpg->pattern = v4l2_ctrl_new_std_menu_items(&xtpg->ctrl_handler, | 
 | 					&xtpg_ctrl_ops, V4L2_CID_TEST_PATTERN, | 
 | 					ARRAY_SIZE(xtpg_pattern_strings) - 1, | 
 | 					1, 9, xtpg_pattern_strings); | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(xtpg_ctrls); i++) | 
 | 		v4l2_ctrl_new_custom(&xtpg->ctrl_handler, &xtpg_ctrls[i], NULL); | 
 |  | 
 | 	if (xtpg->ctrl_handler.error) { | 
 | 		dev_err(&pdev->dev, "failed to add controls\n"); | 
 | 		ret = xtpg->ctrl_handler.error; | 
 | 		goto error; | 
 | 	} | 
 | 	subdev->ctrl_handler = &xtpg->ctrl_handler; | 
 |  | 
 | 	xtpg_update_pattern_control(xtpg, true, true); | 
 |  | 
 | 	ret = v4l2_ctrl_handler_setup(&xtpg->ctrl_handler); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&pdev->dev, "failed to set controls\n"); | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	platform_set_drvdata(pdev, xtpg); | 
 |  | 
 | 	xvip_print_version(&xtpg->xvip); | 
 |  | 
 | 	ret = v4l2_async_register_subdev(subdev); | 
 | 	if (ret < 0) { | 
 | 		dev_err(&pdev->dev, "failed to register subdev\n"); | 
 | 		goto error; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 |  | 
 | error: | 
 | 	v4l2_ctrl_handler_free(&xtpg->ctrl_handler); | 
 | 	media_entity_cleanup(&subdev->entity); | 
 | 	xvtc_put(xtpg->vtc); | 
 | error_resource: | 
 | 	xvip_cleanup_resources(&xtpg->xvip); | 
 | 	return ret; | 
 | } | 
 |  | 
 | static int xtpg_remove(struct platform_device *pdev) | 
 | { | 
 | 	struct xtpg_device *xtpg = platform_get_drvdata(pdev); | 
 | 	struct v4l2_subdev *subdev = &xtpg->xvip.subdev; | 
 |  | 
 | 	v4l2_async_unregister_subdev(subdev); | 
 | 	v4l2_ctrl_handler_free(&xtpg->ctrl_handler); | 
 | 	media_entity_cleanup(&subdev->entity); | 
 |  | 
 | 	xvip_cleanup_resources(&xtpg->xvip); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static SIMPLE_DEV_PM_OPS(xtpg_pm_ops, xtpg_pm_suspend, xtpg_pm_resume); | 
 |  | 
 | static const struct of_device_id xtpg_of_id_table[] = { | 
 | 	{ .compatible = "xlnx,v-tpg-5.0" }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(of, xtpg_of_id_table); | 
 |  | 
 | static struct platform_driver xtpg_driver = { | 
 | 	.driver = { | 
 | 		.name		= "xilinx-tpg", | 
 | 		.pm		= &xtpg_pm_ops, | 
 | 		.of_match_table	= xtpg_of_id_table, | 
 | 	}, | 
 | 	.probe			= xtpg_probe, | 
 | 	.remove			= xtpg_remove, | 
 | }; | 
 |  | 
 | module_platform_driver(xtpg_driver); | 
 |  | 
 | MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); | 
 | MODULE_DESCRIPTION("Xilinx Test Pattern Generator Driver"); | 
 | MODULE_LICENSE("GPL v2"); |