| /* |
| * Marvell Wireless LAN device driver: USB specific handling |
| * |
| * Copyright (C) 2012-2014, Marvell International Ltd. |
| * |
| * This software file (the "File") is distributed by Marvell International |
| * Ltd. under the terms of the GNU General Public License Version 2, June 1991 |
| * (the "License"). You may use, redistribute and/or modify this File in |
| * accordance with the terms and conditions of the License, a copy of which |
| * is available by writing to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the |
| * worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt. |
| * |
| * THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE |
| * ARE EXPRESSLY DISCLAIMED. The License provides additional details about |
| * this warranty disclaimer. |
| */ |
| |
| #include "main.h" |
| #include "usb.h" |
| |
| #define USB_VERSION "1.0" |
| |
| static struct mwifiex_if_ops usb_ops; |
| |
| static const struct usb_device_id mwifiex_usb_table[] = { |
| /* 8766 */ |
| {USB_DEVICE(USB8XXX_VID, USB8766_PID_1)}, |
| {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8766_PID_2, |
| USB_CLASS_VENDOR_SPEC, |
| USB_SUBCLASS_VENDOR_SPEC, 0xff)}, |
| /* 8797 */ |
| {USB_DEVICE(USB8XXX_VID, USB8797_PID_1)}, |
| {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8797_PID_2, |
| USB_CLASS_VENDOR_SPEC, |
| USB_SUBCLASS_VENDOR_SPEC, 0xff)}, |
| /* 8801 */ |
| {USB_DEVICE(USB8XXX_VID, USB8801_PID_1)}, |
| {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8801_PID_2, |
| USB_CLASS_VENDOR_SPEC, |
| USB_SUBCLASS_VENDOR_SPEC, 0xff)}, |
| /* 8997 */ |
| {USB_DEVICE(USB8XXX_VID, USB8997_PID_1)}, |
| {USB_DEVICE_AND_INTERFACE_INFO(USB8XXX_VID, USB8997_PID_2, |
| USB_CLASS_VENDOR_SPEC, |
| USB_SUBCLASS_VENDOR_SPEC, 0xff)}, |
| { } /* Terminating entry */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, mwifiex_usb_table); |
| |
| static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size); |
| |
| /* This function handles received packet. Necessary action is taken based on |
| * cmd/event/data. |
| */ |
| static int mwifiex_usb_recv(struct mwifiex_adapter *adapter, |
| struct sk_buff *skb, u8 ep) |
| { |
| u32 recv_type; |
| __le32 tmp; |
| int ret; |
| |
| if (adapter->hs_activated) |
| mwifiex_process_hs_config(adapter); |
| |
| if (skb->len < INTF_HEADER_LEN) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: invalid skb->len\n", __func__); |
| return -1; |
| } |
| |
| switch (ep) { |
| case MWIFIEX_USB_EP_CMD_EVENT: |
| mwifiex_dbg(adapter, EVENT, |
| "%s: EP_CMD_EVENT\n", __func__); |
| skb_copy_from_linear_data(skb, &tmp, INTF_HEADER_LEN); |
| recv_type = le32_to_cpu(tmp); |
| skb_pull(skb, INTF_HEADER_LEN); |
| |
| switch (recv_type) { |
| case MWIFIEX_USB_TYPE_CMD: |
| if (skb->len > MWIFIEX_SIZE_OF_CMD_BUFFER) { |
| mwifiex_dbg(adapter, ERROR, |
| "CMD: skb->len too large\n"); |
| ret = -1; |
| goto exit_restore_skb; |
| } else if (!adapter->curr_cmd) { |
| mwifiex_dbg(adapter, WARN, "CMD: no curr_cmd\n"); |
| if (adapter->ps_state == PS_STATE_SLEEP_CFM) { |
| mwifiex_process_sleep_confirm_resp( |
| adapter, skb->data, |
| skb->len); |
| ret = 0; |
| goto exit_restore_skb; |
| } |
| ret = -1; |
| goto exit_restore_skb; |
| } |
| |
| adapter->curr_cmd->resp_skb = skb; |
| adapter->cmd_resp_received = true; |
| break; |
| case MWIFIEX_USB_TYPE_EVENT: |
| if (skb->len < sizeof(u32)) { |
| mwifiex_dbg(adapter, ERROR, |
| "EVENT: skb->len too small\n"); |
| ret = -1; |
| goto exit_restore_skb; |
| } |
| skb_copy_from_linear_data(skb, &tmp, sizeof(u32)); |
| adapter->event_cause = le32_to_cpu(tmp); |
| mwifiex_dbg(adapter, EVENT, |
| "event_cause %#x\n", adapter->event_cause); |
| |
| if (skb->len > MAX_EVENT_SIZE) { |
| mwifiex_dbg(adapter, ERROR, |
| "EVENT: event body too large\n"); |
| ret = -1; |
| goto exit_restore_skb; |
| } |
| |
| memcpy(adapter->event_body, skb->data + |
| MWIFIEX_EVENT_HEADER_LEN, skb->len); |
| |
| adapter->event_received = true; |
| adapter->event_skb = skb; |
| break; |
| default: |
| mwifiex_dbg(adapter, ERROR, |
| "unknown recv_type %#x\n", recv_type); |
| return -1; |
| } |
| break; |
| case MWIFIEX_USB_EP_DATA: |
| mwifiex_dbg(adapter, DATA, "%s: EP_DATA\n", __func__); |
| if (skb->len > MWIFIEX_RX_DATA_BUF_SIZE) { |
| mwifiex_dbg(adapter, ERROR, |
| "DATA: skb->len too large\n"); |
| return -1; |
| } |
| |
| skb_queue_tail(&adapter->rx_data_q, skb); |
| adapter->data_received = true; |
| atomic_inc(&adapter->rx_pending); |
| break; |
| default: |
| mwifiex_dbg(adapter, ERROR, |
| "%s: unknown endport %#x\n", __func__, ep); |
| return -1; |
| } |
| |
| return -EINPROGRESS; |
| |
| exit_restore_skb: |
| /* The buffer will be reused for further cmds/events */ |
| skb_push(skb, INTF_HEADER_LEN); |
| |
| return ret; |
| } |
| |
| static void mwifiex_usb_rx_complete(struct urb *urb) |
| { |
| struct urb_context *context = (struct urb_context *)urb->context; |
| struct mwifiex_adapter *adapter = context->adapter; |
| struct sk_buff *skb = context->skb; |
| struct usb_card_rec *card; |
| int recv_length = urb->actual_length; |
| int size, status; |
| |
| if (!adapter || !adapter->card) { |
| pr_err("mwifiex adapter or card structure is not valid\n"); |
| return; |
| } |
| |
| card = (struct usb_card_rec *)adapter->card; |
| if (card->rx_cmd_ep == context->ep) |
| atomic_dec(&card->rx_cmd_urb_pending); |
| else |
| atomic_dec(&card->rx_data_urb_pending); |
| |
| if (recv_length) { |
| if (urb->status || (adapter->surprise_removed)) { |
| mwifiex_dbg(adapter, ERROR, |
| "URB status is failed: %d\n", urb->status); |
| /* Do not free skb in case of command ep */ |
| if (card->rx_cmd_ep != context->ep) |
| dev_kfree_skb_any(skb); |
| goto setup_for_next; |
| } |
| if (skb->len > recv_length) |
| skb_trim(skb, recv_length); |
| else |
| skb_put(skb, recv_length - skb->len); |
| |
| status = mwifiex_usb_recv(adapter, skb, context->ep); |
| |
| mwifiex_dbg(adapter, INFO, |
| "info: recv_length=%d, status=%d\n", |
| recv_length, status); |
| if (status == -EINPROGRESS) { |
| mwifiex_queue_main_work(adapter); |
| |
| /* urb for data_ep is re-submitted now; |
| * urb for cmd_ep will be re-submitted in callback |
| * mwifiex_usb_recv_complete |
| */ |
| if (card->rx_cmd_ep == context->ep) |
| return; |
| } else { |
| if (status == -1) |
| mwifiex_dbg(adapter, ERROR, |
| "received data processing failed!\n"); |
| |
| /* Do not free skb in case of command ep */ |
| if (card->rx_cmd_ep != context->ep) |
| dev_kfree_skb_any(skb); |
| } |
| } else if (urb->status) { |
| if (!adapter->is_suspended) { |
| mwifiex_dbg(adapter, FATAL, |
| "Card is removed: %d\n", urb->status); |
| adapter->surprise_removed = true; |
| } |
| dev_kfree_skb_any(skb); |
| return; |
| } else { |
| /* Do not free skb in case of command ep */ |
| if (card->rx_cmd_ep != context->ep) |
| dev_kfree_skb_any(skb); |
| |
| /* fall through setup_for_next */ |
| } |
| |
| setup_for_next: |
| if (card->rx_cmd_ep == context->ep) |
| size = MWIFIEX_RX_CMD_BUF_SIZE; |
| else |
| size = MWIFIEX_RX_DATA_BUF_SIZE; |
| |
| if (card->rx_cmd_ep == context->ep) { |
| mwifiex_usb_submit_rx_urb(context, size); |
| } else { |
| if (atomic_read(&adapter->rx_pending) <= HIGH_RX_PENDING) { |
| mwifiex_usb_submit_rx_urb(context, size); |
| } else { |
| context->skb = NULL; |
| } |
| } |
| |
| return; |
| } |
| |
| static void mwifiex_usb_tx_complete(struct urb *urb) |
| { |
| struct urb_context *context = (struct urb_context *)(urb->context); |
| struct mwifiex_adapter *adapter = context->adapter; |
| struct usb_card_rec *card = adapter->card; |
| struct usb_tx_data_port *port; |
| int i; |
| |
| mwifiex_dbg(adapter, INFO, |
| "%s: status: %d\n", __func__, urb->status); |
| |
| if (context->ep == card->tx_cmd_ep) { |
| mwifiex_dbg(adapter, CMD, |
| "%s: CMD\n", __func__); |
| atomic_dec(&card->tx_cmd_urb_pending); |
| adapter->cmd_sent = false; |
| } else { |
| mwifiex_dbg(adapter, DATA, |
| "%s: DATA\n", __func__); |
| mwifiex_write_data_complete(adapter, context->skb, 0, |
| urb->status ? -1 : 0); |
| for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| port = &card->port[i]; |
| if (context->ep == port->tx_data_ep) { |
| atomic_dec(&port->tx_data_urb_pending); |
| port->block_status = false; |
| break; |
| } |
| } |
| adapter->data_sent = false; |
| } |
| |
| if (card->mc_resync_flag) |
| mwifiex_multi_chan_resync(adapter); |
| |
| mwifiex_queue_main_work(adapter); |
| |
| return; |
| } |
| |
| static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size) |
| { |
| struct mwifiex_adapter *adapter = ctx->adapter; |
| struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| |
| if (card->rx_cmd_ep != ctx->ep) { |
| ctx->skb = dev_alloc_skb(size); |
| if (!ctx->skb) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: dev_alloc_skb failed\n", __func__); |
| return -ENOMEM; |
| } |
| } |
| |
| if (card->rx_cmd_ep == ctx->ep && |
| card->rx_cmd_ep_type == USB_ENDPOINT_XFER_INT) |
| usb_fill_int_urb(ctx->urb, card->udev, |
| usb_rcvintpipe(card->udev, ctx->ep), |
| ctx->skb->data, size, mwifiex_usb_rx_complete, |
| (void *)ctx, card->rx_cmd_interval); |
| else |
| usb_fill_bulk_urb(ctx->urb, card->udev, |
| usb_rcvbulkpipe(card->udev, ctx->ep), |
| ctx->skb->data, size, mwifiex_usb_rx_complete, |
| (void *)ctx); |
| |
| if (card->rx_cmd_ep == ctx->ep) |
| atomic_inc(&card->rx_cmd_urb_pending); |
| else |
| atomic_inc(&card->rx_data_urb_pending); |
| |
| if (usb_submit_urb(ctx->urb, GFP_ATOMIC)) { |
| mwifiex_dbg(adapter, ERROR, "usb_submit_urb failed\n"); |
| dev_kfree_skb_any(ctx->skb); |
| ctx->skb = NULL; |
| |
| if (card->rx_cmd_ep == ctx->ep) |
| atomic_dec(&card->rx_cmd_urb_pending); |
| else |
| atomic_dec(&card->rx_data_urb_pending); |
| |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static void mwifiex_usb_free(struct usb_card_rec *card) |
| { |
| struct usb_tx_data_port *port; |
| int i, j; |
| |
| if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb) |
| usb_kill_urb(card->rx_cmd.urb); |
| |
| usb_free_urb(card->rx_cmd.urb); |
| card->rx_cmd.urb = NULL; |
| |
| if (atomic_read(&card->rx_data_urb_pending)) |
| for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) |
| if (card->rx_data_list[i].urb) |
| usb_kill_urb(card->rx_data_list[i].urb); |
| |
| for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) { |
| usb_free_urb(card->rx_data_list[i].urb); |
| card->rx_data_list[i].urb = NULL; |
| } |
| |
| for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| port = &card->port[i]; |
| for (j = 0; j < MWIFIEX_TX_DATA_URB; j++) { |
| usb_kill_urb(port->tx_data_list[j].urb); |
| usb_free_urb(port->tx_data_list[j].urb); |
| port->tx_data_list[j].urb = NULL; |
| } |
| } |
| |
| usb_free_urb(card->tx_cmd.urb); |
| card->tx_cmd.urb = NULL; |
| |
| return; |
| } |
| |
| /* This function probes an mwifiex device and registers it. It allocates |
| * the card structure, initiates the device registration and initialization |
| * procedure by adding a logical interface. |
| */ |
| static int mwifiex_usb_probe(struct usb_interface *intf, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *udev = interface_to_usbdev(intf); |
| struct usb_host_interface *iface_desc = intf->cur_altsetting; |
| struct usb_endpoint_descriptor *epd; |
| int ret, i; |
| struct usb_card_rec *card; |
| u16 id_vendor, id_product, bcd_device; |
| |
| card = devm_kzalloc(&intf->dev, sizeof(*card), GFP_KERNEL); |
| if (!card) |
| return -ENOMEM; |
| |
| init_completion(&card->fw_done); |
| |
| id_vendor = le16_to_cpu(udev->descriptor.idVendor); |
| id_product = le16_to_cpu(udev->descriptor.idProduct); |
| bcd_device = le16_to_cpu(udev->descriptor.bcdDevice); |
| pr_debug("info: VID/PID = %X/%X, Boot2 version = %X\n", |
| id_vendor, id_product, bcd_device); |
| |
| /* PID_1 is used for firmware downloading only */ |
| switch (id_product) { |
| case USB8766_PID_1: |
| case USB8797_PID_1: |
| case USB8801_PID_1: |
| case USB8997_PID_1: |
| card->usb_boot_state = USB8XXX_FW_DNLD; |
| break; |
| case USB8766_PID_2: |
| case USB8797_PID_2: |
| case USB8801_PID_2: |
| case USB8997_PID_2: |
| card->usb_boot_state = USB8XXX_FW_READY; |
| break; |
| default: |
| pr_warn("unknown id_product %#x\n", id_product); |
| card->usb_boot_state = USB8XXX_FW_DNLD; |
| break; |
| } |
| |
| card->udev = udev; |
| card->intf = intf; |
| |
| pr_debug("info: bcdUSB=%#x Device Class=%#x SubClass=%#x Protocol=%#x\n", |
| le16_to_cpu(udev->descriptor.bcdUSB), |
| udev->descriptor.bDeviceClass, |
| udev->descriptor.bDeviceSubClass, |
| udev->descriptor.bDeviceProtocol); |
| |
| for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { |
| epd = &iface_desc->endpoint[i].desc; |
| if (usb_endpoint_dir_in(epd) && |
| usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT && |
| (usb_endpoint_xfer_bulk(epd) || |
| usb_endpoint_xfer_int(epd))) { |
| card->rx_cmd_ep_type = usb_endpoint_type(epd); |
| card->rx_cmd_interval = epd->bInterval; |
| pr_debug("info: Rx CMD/EVT:: max pkt size: %d, addr: %d, ep_type: %d\n", |
| le16_to_cpu(epd->wMaxPacketSize), |
| epd->bEndpointAddress, card->rx_cmd_ep_type); |
| card->rx_cmd_ep = usb_endpoint_num(epd); |
| atomic_set(&card->rx_cmd_urb_pending, 0); |
| } |
| if (usb_endpoint_dir_in(epd) && |
| usb_endpoint_num(epd) == MWIFIEX_USB_EP_DATA && |
| usb_endpoint_xfer_bulk(epd)) { |
| pr_debug("info: bulk IN: max pkt size: %d, addr: %d\n", |
| le16_to_cpu(epd->wMaxPacketSize), |
| epd->bEndpointAddress); |
| card->rx_data_ep = usb_endpoint_num(epd); |
| atomic_set(&card->rx_data_urb_pending, 0); |
| } |
| if (usb_endpoint_dir_out(epd) && |
| usb_endpoint_num(epd) == MWIFIEX_USB_EP_DATA && |
| usb_endpoint_xfer_bulk(epd)) { |
| pr_debug("info: bulk OUT: max pkt size: %d, addr: %d\n", |
| le16_to_cpu(epd->wMaxPacketSize), |
| epd->bEndpointAddress); |
| card->port[0].tx_data_ep = usb_endpoint_num(epd); |
| atomic_set(&card->port[0].tx_data_urb_pending, 0); |
| } |
| if (usb_endpoint_dir_out(epd) && |
| usb_endpoint_num(epd) == MWIFIEX_USB_EP_DATA_CH2 && |
| usb_endpoint_xfer_bulk(epd)) { |
| pr_debug("info: bulk OUT chan2:\t" |
| "max pkt size: %d, addr: %d\n", |
| le16_to_cpu(epd->wMaxPacketSize), |
| epd->bEndpointAddress); |
| card->port[1].tx_data_ep = usb_endpoint_num(epd); |
| atomic_set(&card->port[1].tx_data_urb_pending, 0); |
| } |
| if (usb_endpoint_dir_out(epd) && |
| usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT && |
| (usb_endpoint_xfer_bulk(epd) || |
| usb_endpoint_xfer_int(epd))) { |
| card->tx_cmd_ep_type = usb_endpoint_type(epd); |
| card->tx_cmd_interval = epd->bInterval; |
| pr_debug("info: bulk OUT: max pkt size: %d, addr: %d\n", |
| le16_to_cpu(epd->wMaxPacketSize), |
| epd->bEndpointAddress); |
| pr_debug("info: Tx CMD:: max pkt size: %d, addr: %d, ep_type: %d\n", |
| le16_to_cpu(epd->wMaxPacketSize), |
| epd->bEndpointAddress, card->tx_cmd_ep_type); |
| card->tx_cmd_ep = usb_endpoint_num(epd); |
| atomic_set(&card->tx_cmd_urb_pending, 0); |
| card->bulk_out_maxpktsize = |
| le16_to_cpu(epd->wMaxPacketSize); |
| } |
| } |
| |
| usb_set_intfdata(intf, card); |
| |
| ret = mwifiex_add_card(card, &card->fw_done, &usb_ops, |
| MWIFIEX_USB, &card->udev->dev); |
| if (ret) { |
| pr_err("%s: mwifiex_add_card failed: %d\n", __func__, ret); |
| usb_reset_device(udev); |
| return ret; |
| } |
| |
| usb_get_dev(udev); |
| |
| return 0; |
| } |
| |
| /* Kernel needs to suspend all functions separately. Therefore all |
| * registered functions must have drivers with suspend and resume |
| * methods. Failing that the kernel simply removes the whole card. |
| * |
| * If already not suspended, this function allocates and sends a |
| * 'host sleep activate' request to the firmware and turns off the traffic. |
| */ |
| static int mwifiex_usb_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct usb_card_rec *card = usb_get_intfdata(intf); |
| struct mwifiex_adapter *adapter; |
| struct usb_tx_data_port *port; |
| int i, j; |
| |
| /* Might still be loading firmware */ |
| wait_for_completion(&card->fw_done); |
| |
| adapter = card->adapter; |
| if (!adapter) { |
| dev_err(&intf->dev, "card is not valid\n"); |
| return 0; |
| } |
| |
| if (unlikely(adapter->is_suspended)) |
| mwifiex_dbg(adapter, WARN, |
| "Device already suspended\n"); |
| |
| /* Enable the Host Sleep */ |
| if (!mwifiex_enable_hs(adapter)) { |
| mwifiex_dbg(adapter, ERROR, |
| "cmd: failed to suspend\n"); |
| adapter->hs_enabling = false; |
| return -EFAULT; |
| } |
| |
| |
| /* 'is_suspended' flag indicates device is suspended. |
| * It must be set here before the usb_kill_urb() calls. Reason |
| * is in the complete handlers, urb->status(= -ENOENT) and |
| * this flag is used in combination to distinguish between a |
| * 'suspended' state and a 'disconnect' one. |
| */ |
| adapter->is_suspended = true; |
| adapter->hs_enabling = false; |
| |
| if (atomic_read(&card->rx_cmd_urb_pending) && card->rx_cmd.urb) |
| usb_kill_urb(card->rx_cmd.urb); |
| |
| if (atomic_read(&card->rx_data_urb_pending)) |
| for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) |
| if (card->rx_data_list[i].urb) |
| usb_kill_urb(card->rx_data_list[i].urb); |
| |
| for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| port = &card->port[i]; |
| for (j = 0; j < MWIFIEX_TX_DATA_URB; j++) { |
| if (port->tx_data_list[j].urb) |
| usb_kill_urb(port->tx_data_list[j].urb); |
| } |
| } |
| |
| if (card->tx_cmd.urb) |
| usb_kill_urb(card->tx_cmd.urb); |
| |
| return 0; |
| } |
| |
| /* Kernel needs to suspend all functions separately. Therefore all |
| * registered functions must have drivers with suspend and resume |
| * methods. Failing that the kernel simply removes the whole card. |
| * |
| * If already not resumed, this function turns on the traffic and |
| * sends a 'host sleep cancel' request to the firmware. |
| */ |
| static int mwifiex_usb_resume(struct usb_interface *intf) |
| { |
| struct usb_card_rec *card = usb_get_intfdata(intf); |
| struct mwifiex_adapter *adapter; |
| int i; |
| |
| if (!card->adapter) { |
| dev_err(&intf->dev, "%s: card->adapter is NULL\n", |
| __func__); |
| return 0; |
| } |
| adapter = card->adapter; |
| |
| if (unlikely(!adapter->is_suspended)) { |
| mwifiex_dbg(adapter, WARN, |
| "Device already resumed\n"); |
| return 0; |
| } |
| |
| /* Indicate device resumed. The netdev queue will be resumed only |
| * after the urbs have been re-submitted |
| */ |
| adapter->is_suspended = false; |
| |
| if (!atomic_read(&card->rx_data_urb_pending)) |
| for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) |
| mwifiex_usb_submit_rx_urb(&card->rx_data_list[i], |
| MWIFIEX_RX_DATA_BUF_SIZE); |
| |
| if (!atomic_read(&card->rx_cmd_urb_pending)) { |
| card->rx_cmd.skb = dev_alloc_skb(MWIFIEX_RX_CMD_BUF_SIZE); |
| if (card->rx_cmd.skb) |
| mwifiex_usb_submit_rx_urb(&card->rx_cmd, |
| MWIFIEX_RX_CMD_BUF_SIZE); |
| } |
| |
| /* Disable Host Sleep */ |
| if (adapter->hs_activated) |
| mwifiex_cancel_hs(mwifiex_get_priv(adapter, |
| MWIFIEX_BSS_ROLE_ANY), |
| MWIFIEX_ASYNC_CMD); |
| |
| return 0; |
| } |
| |
| static void mwifiex_usb_disconnect(struct usb_interface *intf) |
| { |
| struct usb_card_rec *card = usb_get_intfdata(intf); |
| struct mwifiex_adapter *adapter; |
| |
| wait_for_completion(&card->fw_done); |
| |
| adapter = card->adapter; |
| if (!adapter || !adapter->priv_num) |
| return; |
| |
| if (card->udev->state != USB_STATE_NOTATTACHED && !adapter->mfg_mode) { |
| mwifiex_deauthenticate_all(adapter); |
| |
| mwifiex_init_shutdown_fw(mwifiex_get_priv(adapter, |
| MWIFIEX_BSS_ROLE_ANY), |
| MWIFIEX_FUNC_SHUTDOWN); |
| } |
| |
| mwifiex_dbg(adapter, FATAL, |
| "%s: removing card\n", __func__); |
| mwifiex_remove_card(adapter); |
| |
| usb_put_dev(interface_to_usbdev(intf)); |
| } |
| |
| static void mwifiex_usb_coredump(struct device *dev) |
| { |
| struct usb_interface *intf = to_usb_interface(dev); |
| struct usb_card_rec *card = usb_get_intfdata(intf); |
| |
| mwifiex_fw_dump_event(mwifiex_get_priv(card->adapter, |
| MWIFIEX_BSS_ROLE_ANY)); |
| } |
| |
| static struct usb_driver mwifiex_usb_driver = { |
| .name = "mwifiex_usb", |
| .probe = mwifiex_usb_probe, |
| .disconnect = mwifiex_usb_disconnect, |
| .id_table = mwifiex_usb_table, |
| .suspend = mwifiex_usb_suspend, |
| .resume = mwifiex_usb_resume, |
| .soft_unbind = 1, |
| .drvwrap.driver = { |
| .coredump = mwifiex_usb_coredump, |
| }, |
| }; |
| |
| static int mwifiex_write_data_sync(struct mwifiex_adapter *adapter, u8 *pbuf, |
| u32 *len, u8 ep, u32 timeout) |
| { |
| struct usb_card_rec *card = adapter->card; |
| int actual_length, ret; |
| |
| if (!(*len % card->bulk_out_maxpktsize)) |
| (*len)++; |
| |
| /* Send the data block */ |
| ret = usb_bulk_msg(card->udev, usb_sndbulkpipe(card->udev, ep), pbuf, |
| *len, &actual_length, timeout); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "usb_bulk_msg for tx failed: %d\n", ret); |
| return ret; |
| } |
| |
| *len = actual_length; |
| |
| return ret; |
| } |
| |
| static int mwifiex_read_data_sync(struct mwifiex_adapter *adapter, u8 *pbuf, |
| u32 *len, u8 ep, u32 timeout) |
| { |
| struct usb_card_rec *card = adapter->card; |
| int actual_length, ret; |
| |
| /* Receive the data response */ |
| ret = usb_bulk_msg(card->udev, usb_rcvbulkpipe(card->udev, ep), pbuf, |
| *len, &actual_length, timeout); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "usb_bulk_msg for rx failed: %d\n", ret); |
| return ret; |
| } |
| |
| *len = actual_length; |
| |
| return ret; |
| } |
| |
| static void mwifiex_usb_port_resync(struct mwifiex_adapter *adapter) |
| { |
| struct usb_card_rec *card = adapter->card; |
| u8 active_port = MWIFIEX_USB_EP_DATA; |
| struct mwifiex_private *priv = NULL; |
| int i; |
| |
| if (adapter->usb_mc_status) { |
| for (i = 0; i < adapter->priv_num; i++) { |
| priv = adapter->priv[i]; |
| if (!priv) |
| continue; |
| if ((priv->bss_role == MWIFIEX_BSS_ROLE_UAP && |
| !priv->bss_started) || |
| (priv->bss_role == MWIFIEX_BSS_ROLE_STA && |
| !priv->media_connected)) |
| priv->usb_port = MWIFIEX_USB_EP_DATA; |
| } |
| for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) |
| card->port[i].block_status = false; |
| } else { |
| for (i = 0; i < adapter->priv_num; i++) { |
| priv = adapter->priv[i]; |
| if (!priv) |
| continue; |
| if ((priv->bss_role == MWIFIEX_BSS_ROLE_UAP && |
| priv->bss_started) || |
| (priv->bss_role == MWIFIEX_BSS_ROLE_STA && |
| priv->media_connected)) { |
| active_port = priv->usb_port; |
| break; |
| } |
| } |
| for (i = 0; i < adapter->priv_num; i++) { |
| priv = adapter->priv[i]; |
| if (priv) |
| priv->usb_port = active_port; |
| } |
| for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| if (active_port == card->port[i].tx_data_ep) |
| card->port[i].block_status = false; |
| else |
| card->port[i].block_status = true; |
| } |
| } |
| } |
| |
| static bool mwifiex_usb_is_port_ready(struct mwifiex_private *priv) |
| { |
| struct usb_card_rec *card = priv->adapter->card; |
| int idx; |
| |
| for (idx = 0; idx < MWIFIEX_TX_DATA_PORT; idx++) { |
| if (priv->usb_port == card->port[idx].tx_data_ep) |
| return !card->port[idx].block_status; |
| } |
| |
| return false; |
| } |
| |
| static inline u8 mwifiex_usb_data_sent(struct mwifiex_adapter *adapter) |
| { |
| struct usb_card_rec *card = adapter->card; |
| int i; |
| |
| for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) |
| if (!card->port[i].block_status) |
| return false; |
| |
| return true; |
| } |
| |
| static int mwifiex_usb_construct_send_urb(struct mwifiex_adapter *adapter, |
| struct usb_tx_data_port *port, u8 ep, |
| struct urb_context *context, |
| struct sk_buff *skb_send) |
| { |
| struct usb_card_rec *card = adapter->card; |
| int ret = -EINPROGRESS; |
| struct urb *tx_urb; |
| |
| context->adapter = adapter; |
| context->ep = ep; |
| context->skb = skb_send; |
| tx_urb = context->urb; |
| |
| if (ep == card->tx_cmd_ep && |
| card->tx_cmd_ep_type == USB_ENDPOINT_XFER_INT) |
| usb_fill_int_urb(tx_urb, card->udev, |
| usb_sndintpipe(card->udev, ep), skb_send->data, |
| skb_send->len, mwifiex_usb_tx_complete, |
| (void *)context, card->tx_cmd_interval); |
| else |
| usb_fill_bulk_urb(tx_urb, card->udev, |
| usb_sndbulkpipe(card->udev, ep), |
| skb_send->data, skb_send->len, |
| mwifiex_usb_tx_complete, (void *)context); |
| |
| tx_urb->transfer_flags |= URB_ZERO_PACKET; |
| |
| if (ep == card->tx_cmd_ep) |
| atomic_inc(&card->tx_cmd_urb_pending); |
| else |
| atomic_inc(&port->tx_data_urb_pending); |
| |
| if (ep != card->tx_cmd_ep && |
| atomic_read(&port->tx_data_urb_pending) == |
| MWIFIEX_TX_DATA_URB) { |
| port->block_status = true; |
| adapter->data_sent = mwifiex_usb_data_sent(adapter); |
| ret = -ENOSR; |
| } |
| |
| if (usb_submit_urb(tx_urb, GFP_ATOMIC)) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: usb_submit_urb failed\n", __func__); |
| if (ep == card->tx_cmd_ep) { |
| atomic_dec(&card->tx_cmd_urb_pending); |
| } else { |
| atomic_dec(&port->tx_data_urb_pending); |
| port->block_status = false; |
| adapter->data_sent = false; |
| if (port->tx_data_ix) |
| port->tx_data_ix--; |
| else |
| port->tx_data_ix = MWIFIEX_TX_DATA_URB; |
| } |
| ret = -1; |
| } |
| |
| return ret; |
| } |
| |
| static int mwifiex_usb_prepare_tx_aggr_skb(struct mwifiex_adapter *adapter, |
| struct usb_tx_data_port *port, |
| struct sk_buff **skb_send) |
| { |
| struct sk_buff *skb_aggr, *skb_tmp; |
| u8 *payload, pad; |
| u16 align = adapter->bus_aggr.tx_aggr_align; |
| struct mwifiex_txinfo *tx_info = NULL; |
| bool is_txinfo_set = false; |
| |
| /* Packets in aggr_list will be send in either skb_aggr or |
| * write complete, delete the tx_aggr timer |
| */ |
| if (port->tx_aggr.timer_cnxt.is_hold_timer_set) { |
| del_timer(&port->tx_aggr.timer_cnxt.hold_timer); |
| port->tx_aggr.timer_cnxt.is_hold_timer_set = false; |
| port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0; |
| } |
| |
| skb_aggr = mwifiex_alloc_dma_align_buf(port->tx_aggr.aggr_len, |
| GFP_ATOMIC); |
| if (!skb_aggr) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: alloc skb_aggr failed\n", __func__); |
| |
| while ((skb_tmp = skb_dequeue(&port->tx_aggr.aggr_list))) |
| mwifiex_write_data_complete(adapter, skb_tmp, 0, -1); |
| |
| port->tx_aggr.aggr_num = 0; |
| port->tx_aggr.aggr_len = 0; |
| return -EBUSY; |
| } |
| |
| tx_info = MWIFIEX_SKB_TXCB(skb_aggr); |
| memset(tx_info, 0, sizeof(*tx_info)); |
| |
| while ((skb_tmp = skb_dequeue(&port->tx_aggr.aggr_list))) { |
| /* padding for aligning next packet header*/ |
| pad = (align - (skb_tmp->len & (align - 1))) % align; |
| payload = skb_put(skb_aggr, skb_tmp->len + pad); |
| memcpy(payload, skb_tmp->data, skb_tmp->len); |
| if (skb_queue_empty(&port->tx_aggr.aggr_list)) { |
| /* do not padding for last packet*/ |
| *(u16 *)payload = cpu_to_le16(skb_tmp->len); |
| *(u16 *)&payload[2] = |
| cpu_to_le16(MWIFIEX_TYPE_AGGR_DATA_V2 | 0x80); |
| skb_trim(skb_aggr, skb_aggr->len - pad); |
| } else { |
| /* add aggregation interface header */ |
| *(u16 *)payload = cpu_to_le16(skb_tmp->len + pad); |
| *(u16 *)&payload[2] = |
| cpu_to_le16(MWIFIEX_TYPE_AGGR_DATA_V2); |
| } |
| |
| if (!is_txinfo_set) { |
| tx_info->bss_num = MWIFIEX_SKB_TXCB(skb_tmp)->bss_num; |
| tx_info->bss_type = MWIFIEX_SKB_TXCB(skb_tmp)->bss_type; |
| is_txinfo_set = true; |
| } |
| |
| port->tx_aggr.aggr_num--; |
| port->tx_aggr.aggr_len -= (skb_tmp->len + pad); |
| mwifiex_write_data_complete(adapter, skb_tmp, 0, 0); |
| } |
| |
| tx_info->pkt_len = skb_aggr->len - |
| (sizeof(struct txpd) + adapter->intf_hdr_len); |
| tx_info->flags |= MWIFIEX_BUF_FLAG_AGGR_PKT; |
| |
| port->tx_aggr.aggr_num = 0; |
| port->tx_aggr.aggr_len = 0; |
| *skb_send = skb_aggr; |
| |
| return 0; |
| } |
| |
| /* This function prepare data packet to be send under usb tx aggregation |
| * protocol, check current usb aggregation status, link packet to aggrgation |
| * list if possible, work flow as below: |
| * (1) if only 1 packet available, add usb tx aggregation header and send. |
| * (2) if packet is able to aggregated, link it to current aggregation list. |
| * (3) if packet is not able to aggregated, aggregate and send exist packets |
| * in aggrgation list. Then, link packet in the list if there is more |
| * packet in transmit queue, otherwise try to transmit single packet. |
| */ |
| static int mwifiex_usb_aggr_tx_data(struct mwifiex_adapter *adapter, u8 ep, |
| struct sk_buff *skb, |
| struct mwifiex_tx_param *tx_param, |
| struct usb_tx_data_port *port) |
| { |
| u8 *payload, pad; |
| u16 align = adapter->bus_aggr.tx_aggr_align; |
| struct sk_buff *skb_send = NULL; |
| struct urb_context *context = NULL; |
| struct txpd *local_tx_pd = |
| (struct txpd *)((u8 *)skb->data + adapter->intf_hdr_len); |
| u8 f_send_aggr_buf = 0; |
| u8 f_send_cur_buf = 0; |
| u8 f_precopy_cur_buf = 0; |
| u8 f_postcopy_cur_buf = 0; |
| u32 timeout; |
| int ret; |
| |
| /* padding to ensure each packet alginment */ |
| pad = (align - (skb->len & (align - 1))) % align; |
| |
| if (tx_param && tx_param->next_pkt_len) { |
| /* next packet available in tx queue*/ |
| if (port->tx_aggr.aggr_len + skb->len + pad > |
| adapter->bus_aggr.tx_aggr_max_size) { |
| f_send_aggr_buf = 1; |
| f_postcopy_cur_buf = 1; |
| } else { |
| /* current packet could be aggregated*/ |
| f_precopy_cur_buf = 1; |
| |
| if (port->tx_aggr.aggr_len + skb->len + pad + |
| tx_param->next_pkt_len > |
| adapter->bus_aggr.tx_aggr_max_size || |
| port->tx_aggr.aggr_num + 2 > |
| adapter->bus_aggr.tx_aggr_max_num) { |
| /* next packet could not be aggregated |
| * send current aggregation buffer |
| */ |
| f_send_aggr_buf = 1; |
| } |
| } |
| } else { |
| /* last packet in tx queue */ |
| if (port->tx_aggr.aggr_num > 0) { |
| /* pending packets in aggregation buffer*/ |
| if (port->tx_aggr.aggr_len + skb->len + pad > |
| adapter->bus_aggr.tx_aggr_max_size) { |
| /* current packet not be able to aggregated, |
| * send aggr buffer first, then send packet. |
| */ |
| f_send_cur_buf = 1; |
| } else { |
| /* last packet, Aggregation and send */ |
| f_precopy_cur_buf = 1; |
| } |
| |
| f_send_aggr_buf = 1; |
| } else { |
| /* no pending packets in aggregation buffer, |
| * send current packet immediately |
| */ |
| f_send_cur_buf = 1; |
| } |
| } |
| |
| if (local_tx_pd->flags & MWIFIEX_TxPD_POWER_MGMT_NULL_PACKET) { |
| /* Send NULL packet immediately*/ |
| if (f_precopy_cur_buf) { |
| if (skb_queue_empty(&port->tx_aggr.aggr_list)) { |
| f_precopy_cur_buf = 0; |
| f_send_aggr_buf = 0; |
| f_send_cur_buf = 1; |
| } else { |
| f_send_aggr_buf = 1; |
| } |
| } else if (f_postcopy_cur_buf) { |
| f_send_cur_buf = 1; |
| f_postcopy_cur_buf = 0; |
| } |
| } |
| |
| if (f_precopy_cur_buf) { |
| skb_queue_tail(&port->tx_aggr.aggr_list, skb); |
| port->tx_aggr.aggr_len += (skb->len + pad); |
| port->tx_aggr.aggr_num++; |
| if (f_send_aggr_buf) |
| goto send_aggr_buf; |
| |
| /* packet will not been send immediately, |
| * set a timer to make sure it will be sent under |
| * strict time limit. Dynamically fit the timeout |
| * value, according to packets number in aggr_list |
| */ |
| if (!port->tx_aggr.timer_cnxt.is_hold_timer_set) { |
| port->tx_aggr.timer_cnxt.hold_tmo_msecs = |
| MWIFIEX_USB_TX_AGGR_TMO_MIN; |
| timeout = |
| port->tx_aggr.timer_cnxt.hold_tmo_msecs; |
| mod_timer(&port->tx_aggr.timer_cnxt.hold_timer, |
| jiffies + msecs_to_jiffies(timeout)); |
| port->tx_aggr.timer_cnxt.is_hold_timer_set = true; |
| } else { |
| if (port->tx_aggr.timer_cnxt.hold_tmo_msecs < |
| MWIFIEX_USB_TX_AGGR_TMO_MAX) { |
| /* Dyanmic fit timeout */ |
| timeout = |
| ++port->tx_aggr.timer_cnxt.hold_tmo_msecs; |
| mod_timer(&port->tx_aggr.timer_cnxt.hold_timer, |
| jiffies + msecs_to_jiffies(timeout)); |
| } |
| } |
| } |
| |
| send_aggr_buf: |
| if (f_send_aggr_buf) { |
| ret = mwifiex_usb_prepare_tx_aggr_skb(adapter, port, &skb_send); |
| if (!ret) { |
| context = &port->tx_data_list[port->tx_data_ix++]; |
| ret = mwifiex_usb_construct_send_urb(adapter, port, ep, |
| context, skb_send); |
| if (ret == -1) |
| mwifiex_write_data_complete(adapter, skb_send, |
| 0, -1); |
| } |
| } |
| |
| if (f_send_cur_buf) { |
| if (f_send_aggr_buf) { |
| if (atomic_read(&port->tx_data_urb_pending) >= |
| MWIFIEX_TX_DATA_URB) { |
| port->block_status = true; |
| adapter->data_sent = |
| mwifiex_usb_data_sent(adapter); |
| /* no available urb, postcopy packet*/ |
| f_postcopy_cur_buf = 1; |
| goto postcopy_cur_buf; |
| } |
| |
| if (port->tx_data_ix >= MWIFIEX_TX_DATA_URB) |
| port->tx_data_ix = 0; |
| } |
| |
| payload = skb->data; |
| *(u16 *)&payload[2] = |
| cpu_to_le16(MWIFIEX_TYPE_AGGR_DATA_V2 | 0x80); |
| *(u16 *)payload = cpu_to_le16(skb->len); |
| skb_send = skb; |
| context = &port->tx_data_list[port->tx_data_ix++]; |
| return mwifiex_usb_construct_send_urb(adapter, port, ep, |
| context, skb_send); |
| } |
| |
| postcopy_cur_buf: |
| if (f_postcopy_cur_buf) { |
| skb_queue_tail(&port->tx_aggr.aggr_list, skb); |
| port->tx_aggr.aggr_len += (skb->len + pad); |
| port->tx_aggr.aggr_num++; |
| /* New aggregation begin, start timer */ |
| if (!port->tx_aggr.timer_cnxt.is_hold_timer_set) { |
| port->tx_aggr.timer_cnxt.hold_tmo_msecs = |
| MWIFIEX_USB_TX_AGGR_TMO_MIN; |
| timeout = port->tx_aggr.timer_cnxt.hold_tmo_msecs; |
| mod_timer(&port->tx_aggr.timer_cnxt.hold_timer, |
| jiffies + msecs_to_jiffies(timeout)); |
| port->tx_aggr.timer_cnxt.is_hold_timer_set = true; |
| } |
| } |
| |
| return -EINPROGRESS; |
| } |
| |
| static void mwifiex_usb_tx_aggr_tmo(struct timer_list *t) |
| { |
| struct urb_context *urb_cnxt = NULL; |
| struct sk_buff *skb_send = NULL; |
| struct tx_aggr_tmr_cnxt *timer_context = |
| from_timer(timer_context, t, hold_timer); |
| struct mwifiex_adapter *adapter = timer_context->adapter; |
| struct usb_tx_data_port *port = timer_context->port; |
| unsigned long flags; |
| int err = 0; |
| |
| spin_lock_irqsave(&port->tx_aggr_lock, flags); |
| err = mwifiex_usb_prepare_tx_aggr_skb(adapter, port, &skb_send); |
| if (err) { |
| mwifiex_dbg(adapter, ERROR, |
| "prepare tx aggr skb failed, err=%d\n", err); |
| goto unlock; |
| } |
| |
| if (atomic_read(&port->tx_data_urb_pending) >= |
| MWIFIEX_TX_DATA_URB) { |
| port->block_status = true; |
| adapter->data_sent = |
| mwifiex_usb_data_sent(adapter); |
| err = -1; |
| goto done; |
| } |
| |
| if (port->tx_data_ix >= MWIFIEX_TX_DATA_URB) |
| port->tx_data_ix = 0; |
| |
| urb_cnxt = &port->tx_data_list[port->tx_data_ix++]; |
| err = mwifiex_usb_construct_send_urb(adapter, port, port->tx_data_ep, |
| urb_cnxt, skb_send); |
| done: |
| if (err == -1) |
| mwifiex_write_data_complete(adapter, skb_send, 0, -1); |
| unlock: |
| spin_unlock_irqrestore(&port->tx_aggr_lock, flags); |
| } |
| |
| /* This function write a command/data packet to card. */ |
| static int mwifiex_usb_host_to_card(struct mwifiex_adapter *adapter, u8 ep, |
| struct sk_buff *skb, |
| struct mwifiex_tx_param *tx_param) |
| { |
| struct usb_card_rec *card = adapter->card; |
| struct urb_context *context = NULL; |
| struct usb_tx_data_port *port = NULL; |
| unsigned long flags; |
| int idx, ret; |
| |
| if (adapter->is_suspended) { |
| mwifiex_dbg(adapter, ERROR, |
| "%s: not allowed while suspended\n", __func__); |
| return -1; |
| } |
| |
| if (adapter->surprise_removed) { |
| mwifiex_dbg(adapter, ERROR, "%s: device removed\n", __func__); |
| return -1; |
| } |
| |
| mwifiex_dbg(adapter, INFO, "%s: ep=%d\n", __func__, ep); |
| |
| if (ep == card->tx_cmd_ep) { |
| context = &card->tx_cmd; |
| } else { |
| /* get the data port structure for endpoint */ |
| for (idx = 0; idx < MWIFIEX_TX_DATA_PORT; idx++) { |
| if (ep == card->port[idx].tx_data_ep) { |
| port = &card->port[idx]; |
| if (atomic_read(&port->tx_data_urb_pending) |
| >= MWIFIEX_TX_DATA_URB) { |
| port->block_status = true; |
| adapter->data_sent = |
| mwifiex_usb_data_sent(adapter); |
| return -EBUSY; |
| } |
| if (port->tx_data_ix >= MWIFIEX_TX_DATA_URB) |
| port->tx_data_ix = 0; |
| break; |
| } |
| } |
| |
| if (!port) { |
| mwifiex_dbg(adapter, ERROR, "Wrong usb tx data port\n"); |
| return -1; |
| } |
| |
| if (adapter->bus_aggr.enable) { |
| spin_lock_irqsave(&port->tx_aggr_lock, flags); |
| ret = mwifiex_usb_aggr_tx_data(adapter, ep, skb, |
| tx_param, port); |
| spin_unlock_irqrestore(&port->tx_aggr_lock, flags); |
| return ret; |
| } |
| |
| context = &port->tx_data_list[port->tx_data_ix++]; |
| } |
| |
| return mwifiex_usb_construct_send_urb(adapter, port, ep, context, skb); |
| } |
| |
| static int mwifiex_usb_tx_init(struct mwifiex_adapter *adapter) |
| { |
| struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| struct usb_tx_data_port *port; |
| int i, j; |
| |
| card->tx_cmd.adapter = adapter; |
| card->tx_cmd.ep = card->tx_cmd_ep; |
| |
| card->tx_cmd.urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!card->tx_cmd.urb) |
| return -ENOMEM; |
| |
| for (i = 0; i < MWIFIEX_TX_DATA_PORT; i++) { |
| port = &card->port[i]; |
| if (!port->tx_data_ep) |
| continue; |
| port->tx_data_ix = 0; |
| skb_queue_head_init(&port->tx_aggr.aggr_list); |
| if (port->tx_data_ep == MWIFIEX_USB_EP_DATA) |
| port->block_status = false; |
| else |
| port->block_status = true; |
| for (j = 0; j < MWIFIEX_TX_DATA_URB; j++) { |
| port->tx_data_list[j].adapter = adapter; |
| port->tx_data_list[j].ep = port->tx_data_ep; |
| port->tx_data_list[j].urb = |
| usb_alloc_urb(0, GFP_KERNEL); |
| if (!port->tx_data_list[j].urb) |
| return -ENOMEM; |
| } |
| |
| port->tx_aggr.timer_cnxt.adapter = adapter; |
| port->tx_aggr.timer_cnxt.port = port; |
| port->tx_aggr.timer_cnxt.is_hold_timer_set = false; |
| port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0; |
| timer_setup(&port->tx_aggr.timer_cnxt.hold_timer, |
| mwifiex_usb_tx_aggr_tmo, 0); |
| } |
| |
| return 0; |
| } |
| |
| static int mwifiex_usb_rx_init(struct mwifiex_adapter *adapter) |
| { |
| struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| int i; |
| |
| card->rx_cmd.adapter = adapter; |
| card->rx_cmd.ep = card->rx_cmd_ep; |
| |
| card->rx_cmd.urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!card->rx_cmd.urb) |
| return -ENOMEM; |
| |
| card->rx_cmd.skb = dev_alloc_skb(MWIFIEX_RX_CMD_BUF_SIZE); |
| if (!card->rx_cmd.skb) |
| return -ENOMEM; |
| |
| if (mwifiex_usb_submit_rx_urb(&card->rx_cmd, MWIFIEX_RX_CMD_BUF_SIZE)) |
| return -1; |
| |
| for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) { |
| card->rx_data_list[i].adapter = adapter; |
| card->rx_data_list[i].ep = card->rx_data_ep; |
| |
| card->rx_data_list[i].urb = usb_alloc_urb(0, GFP_KERNEL); |
| if (!card->rx_data_list[i].urb) |
| return -1; |
| if (mwifiex_usb_submit_rx_urb(&card->rx_data_list[i], |
| MWIFIEX_RX_DATA_BUF_SIZE)) |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* This function register usb device and initialize parameter. */ |
| static int mwifiex_register_dev(struct mwifiex_adapter *adapter) |
| { |
| struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| |
| card->adapter = adapter; |
| |
| switch (le16_to_cpu(card->udev->descriptor.idProduct)) { |
| case USB8997_PID_1: |
| case USB8997_PID_2: |
| adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K; |
| strcpy(adapter->fw_name, USB8997_DEFAULT_FW_NAME); |
| adapter->ext_scan = true; |
| break; |
| case USB8766_PID_1: |
| case USB8766_PID_2: |
| adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; |
| strcpy(adapter->fw_name, USB8766_DEFAULT_FW_NAME); |
| adapter->ext_scan = true; |
| break; |
| case USB8801_PID_1: |
| case USB8801_PID_2: |
| adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; |
| strcpy(adapter->fw_name, USB8801_DEFAULT_FW_NAME); |
| adapter->ext_scan = false; |
| break; |
| case USB8797_PID_1: |
| case USB8797_PID_2: |
| default: |
| adapter->tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_2K; |
| strcpy(adapter->fw_name, USB8797_DEFAULT_FW_NAME); |
| break; |
| } |
| |
| adapter->usb_mc_status = false; |
| adapter->usb_mc_setup = false; |
| |
| return 0; |
| } |
| |
| static void mwifiex_usb_cleanup_tx_aggr(struct mwifiex_adapter *adapter) |
| { |
| struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| struct usb_tx_data_port *port; |
| struct sk_buff *skb_tmp; |
| int idx; |
| |
| for (idx = 0; idx < MWIFIEX_TX_DATA_PORT; idx++) { |
| port = &card->port[idx]; |
| if (adapter->bus_aggr.enable) |
| while ((skb_tmp = |
| skb_dequeue(&port->tx_aggr.aggr_list))) |
| mwifiex_write_data_complete(adapter, skb_tmp, |
| 0, -1); |
| del_timer_sync(&port->tx_aggr.timer_cnxt.hold_timer); |
| port->tx_aggr.timer_cnxt.is_hold_timer_set = false; |
| port->tx_aggr.timer_cnxt.hold_tmo_msecs = 0; |
| } |
| } |
| |
| static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) |
| { |
| struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| |
| mwifiex_usb_free(card); |
| |
| mwifiex_usb_cleanup_tx_aggr(adapter); |
| |
| card->adapter = NULL; |
| } |
| |
| static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, |
| struct mwifiex_fw_image *fw) |
| { |
| int ret = 0; |
| u8 *firmware = fw->fw_buf, *recv_buff; |
| u32 retries = USB8XXX_FW_MAX_RETRY + 1; |
| u32 dlen; |
| u32 fw_seqnum = 0, tlen = 0, dnld_cmd = 0; |
| struct fw_data *fwdata; |
| struct fw_sync_header sync_fw; |
| u8 check_winner = 1; |
| |
| if (!firmware) { |
| mwifiex_dbg(adapter, ERROR, |
| "No firmware image found! Terminating download\n"); |
| ret = -1; |
| goto fw_exit; |
| } |
| |
| /* Allocate memory for transmit */ |
| fwdata = kzalloc(FW_DNLD_TX_BUF_SIZE, GFP_KERNEL); |
| if (!fwdata) { |
| ret = -ENOMEM; |
| goto fw_exit; |
| } |
| |
| /* Allocate memory for receive */ |
| recv_buff = kzalloc(FW_DNLD_RX_BUF_SIZE, GFP_KERNEL); |
| if (!recv_buff) { |
| ret = -ENOMEM; |
| goto cleanup; |
| } |
| |
| do { |
| /* Send pseudo data to check winner status first */ |
| if (check_winner) { |
| memset(&fwdata->fw_hdr, 0, sizeof(struct fw_header)); |
| dlen = 0; |
| } else { |
| /* copy the header of the fw_data to get the length */ |
| memcpy(&fwdata->fw_hdr, &firmware[tlen], |
| sizeof(struct fw_header)); |
| |
| dlen = le32_to_cpu(fwdata->fw_hdr.data_len); |
| dnld_cmd = le32_to_cpu(fwdata->fw_hdr.dnld_cmd); |
| tlen += sizeof(struct fw_header); |
| |
| /* Command 7 doesn't have data length field */ |
| if (dnld_cmd == FW_CMD_7) |
| dlen = 0; |
| |
| memcpy(fwdata->data, &firmware[tlen], dlen); |
| |
| fwdata->seq_num = cpu_to_le32(fw_seqnum); |
| tlen += dlen; |
| } |
| |
| /* If the send/receive fails or CRC occurs then retry */ |
| while (--retries) { |
| u8 *buf = (u8 *)fwdata; |
| u32 len = FW_DATA_XMIT_SIZE; |
| |
| /* send the firmware block */ |
| ret = mwifiex_write_data_sync(adapter, buf, &len, |
| MWIFIEX_USB_EP_CMD_EVENT, |
| MWIFIEX_USB_TIMEOUT); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "write_data_sync: failed: %d\n", |
| ret); |
| continue; |
| } |
| |
| buf = recv_buff; |
| len = FW_DNLD_RX_BUF_SIZE; |
| |
| /* Receive the firmware block response */ |
| ret = mwifiex_read_data_sync(adapter, buf, &len, |
| MWIFIEX_USB_EP_CMD_EVENT, |
| MWIFIEX_USB_TIMEOUT); |
| if (ret) { |
| mwifiex_dbg(adapter, ERROR, |
| "read_data_sync: failed: %d\n", |
| ret); |
| continue; |
| } |
| |
| memcpy(&sync_fw, recv_buff, |
| sizeof(struct fw_sync_header)); |
| |
| /* check 1st firmware block resp for highest bit set */ |
| if (check_winner) { |
| if (le32_to_cpu(sync_fw.cmd) & 0x80000000) { |
| mwifiex_dbg(adapter, WARN, |
| "USB is not the winner %#x\n", |
| sync_fw.cmd); |
| |
| /* returning success */ |
| ret = 0; |
| goto cleanup; |
| } |
| |
| mwifiex_dbg(adapter, MSG, |
| "start to download FW...\n"); |
| |
| check_winner = 0; |
| break; |
| } |
| |
| /* check the firmware block response for CRC errors */ |
| if (sync_fw.cmd) { |
| mwifiex_dbg(adapter, ERROR, |
| "FW received block with CRC %#x\n", |
| sync_fw.cmd); |
| ret = -1; |
| continue; |
| } |
| |
| retries = USB8XXX_FW_MAX_RETRY + 1; |
| break; |
| } |
| fw_seqnum++; |
| } while ((dnld_cmd != FW_HAS_LAST_BLOCK) && retries); |
| |
| cleanup: |
| mwifiex_dbg(adapter, MSG, |
| "info: FW download over, size %d bytes\n", tlen); |
| |
| kfree(recv_buff); |
| kfree(fwdata); |
| |
| if (retries) |
| ret = 0; |
| fw_exit: |
| return ret; |
| } |
| |
| static int mwifiex_usb_dnld_fw(struct mwifiex_adapter *adapter, |
| struct mwifiex_fw_image *fw) |
| { |
| int ret; |
| struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| |
| if (card->usb_boot_state == USB8XXX_FW_DNLD) { |
| ret = mwifiex_prog_fw_w_helper(adapter, fw); |
| if (ret) |
| return -1; |
| |
| /* Boot state changes after successful firmware download */ |
| if (card->usb_boot_state == USB8XXX_FW_DNLD) |
| return -1; |
| } |
| |
| ret = mwifiex_usb_rx_init(adapter); |
| if (!ret) |
| ret = mwifiex_usb_tx_init(adapter); |
| |
| return ret; |
| } |
| |
| static void mwifiex_submit_rx_urb(struct mwifiex_adapter *adapter, u8 ep) |
| { |
| struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| |
| skb_push(card->rx_cmd.skb, INTF_HEADER_LEN); |
| if ((ep == card->rx_cmd_ep) && |
| (!atomic_read(&card->rx_cmd_urb_pending))) |
| mwifiex_usb_submit_rx_urb(&card->rx_cmd, |
| MWIFIEX_RX_CMD_BUF_SIZE); |
| |
| return; |
| } |
| |
| static int mwifiex_usb_cmd_event_complete(struct mwifiex_adapter *adapter, |
| struct sk_buff *skb) |
| { |
| mwifiex_submit_rx_urb(adapter, MWIFIEX_USB_EP_CMD_EVENT); |
| |
| return 0; |
| } |
| |
| /* This function wakes up the card. */ |
| static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter) |
| { |
| /* Simulation of HS_AWAKE event */ |
| adapter->pm_wakeup_fw_try = false; |
| del_timer(&adapter->wakeup_timer); |
| adapter->pm_wakeup_card_req = false; |
| adapter->ps_state = PS_STATE_AWAKE; |
| |
| return 0; |
| } |
| |
| static void mwifiex_usb_submit_rem_rx_urbs(struct mwifiex_adapter *adapter) |
| { |
| struct usb_card_rec *card = (struct usb_card_rec *)adapter->card; |
| int i; |
| struct urb_context *ctx; |
| |
| for (i = 0; i < MWIFIEX_RX_DATA_URB; i++) { |
| if (card->rx_data_list[i].skb) |
| continue; |
| ctx = &card->rx_data_list[i]; |
| mwifiex_usb_submit_rx_urb(ctx, MWIFIEX_RX_DATA_BUF_SIZE); |
| } |
| } |
| |
| /* This function is called after the card has woken up. */ |
| static inline int |
| mwifiex_pm_wakeup_card_complete(struct mwifiex_adapter *adapter) |
| { |
| return 0; |
| } |
| |
| static struct mwifiex_if_ops usb_ops = { |
| .register_dev = mwifiex_register_dev, |
| .unregister_dev = mwifiex_unregister_dev, |
| .wakeup = mwifiex_pm_wakeup_card, |
| .wakeup_complete = mwifiex_pm_wakeup_card_complete, |
| |
| /* USB specific */ |
| .dnld_fw = mwifiex_usb_dnld_fw, |
| .cmdrsp_complete = mwifiex_usb_cmd_event_complete, |
| .event_complete = mwifiex_usb_cmd_event_complete, |
| .host_to_card = mwifiex_usb_host_to_card, |
| .submit_rem_rx_urbs = mwifiex_usb_submit_rem_rx_urbs, |
| .multi_port_resync = mwifiex_usb_port_resync, |
| .is_port_ready = mwifiex_usb_is_port_ready, |
| }; |
| |
| module_usb_driver(mwifiex_usb_driver); |
| |
| MODULE_AUTHOR("Marvell International Ltd."); |
| MODULE_DESCRIPTION("Marvell WiFi-Ex USB Driver version" USB_VERSION); |
| MODULE_VERSION(USB_VERSION); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_FIRMWARE(USB8766_DEFAULT_FW_NAME); |
| MODULE_FIRMWARE(USB8797_DEFAULT_FW_NAME); |
| MODULE_FIRMWARE(USB8801_DEFAULT_FW_NAME); |
| MODULE_FIRMWARE(USB8997_DEFAULT_FW_NAME); |