|  | /* NXP PCF50633 Power Management Unit (PMU) driver | 
|  | * | 
|  | * (C) 2006-2008 by Openmoko, Inc. | 
|  | * Author: Harald Welte <laforge@openmoko.org> | 
|  | * 	   Balaji Rao <balajirrao@openmoko.org> | 
|  | * All rights reserved. | 
|  | * | 
|  | *  This program is free software; you can redistribute  it and/or modify it | 
|  | *  under  the terms of  the GNU General  Public License as published by the | 
|  | *  Free Software Foundation;  either version 2 of the  License, or (at your | 
|  | *  option) any later version. | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/device.h> | 
|  | #include <linux/sysfs.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include <linux/platform_device.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/irq.h> | 
|  |  | 
|  | #include <linux/mfd/pcf50633/core.h> | 
|  |  | 
|  | /* Two MBCS registers used during cold start */ | 
|  | #define PCF50633_REG_MBCS1		0x4b | 
|  | #define PCF50633_REG_MBCS2		0x4c | 
|  | #define PCF50633_MBCS1_USBPRES 		0x01 | 
|  | #define PCF50633_MBCS1_ADAPTPRES	0x01 | 
|  |  | 
|  | static int __pcf50633_read(struct pcf50633 *pcf, u8 reg, int num, u8 *data) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_smbus_read_i2c_block_data(pcf->i2c_client, reg, | 
|  | num, data); | 
|  | if (ret < 0) | 
|  | dev_err(pcf->dev, "Error reading %d regs at %d\n", num, reg); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | ret = i2c_smbus_write_i2c_block_data(pcf->i2c_client, reg, | 
|  | num, data); | 
|  | if (ret < 0) | 
|  | dev_err(pcf->dev, "Error writing %d regs at %d\n", num, reg); | 
|  |  | 
|  | return ret; | 
|  |  | 
|  | } | 
|  |  | 
|  | /* Read a block of upto 32 regs  */ | 
|  | int pcf50633_read_block(struct pcf50633 *pcf, u8 reg, | 
|  | int nr_regs, u8 *data) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&pcf->lock); | 
|  | ret = __pcf50633_read(pcf, reg, nr_regs, data); | 
|  | mutex_unlock(&pcf->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_read_block); | 
|  |  | 
|  | /* Write a block of upto 32 regs  */ | 
|  | int pcf50633_write_block(struct pcf50633 *pcf , u8 reg, | 
|  | int nr_regs, u8 *data) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&pcf->lock); | 
|  | ret = __pcf50633_write(pcf, reg, nr_regs, data); | 
|  | mutex_unlock(&pcf->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_write_block); | 
|  |  | 
|  | u8 pcf50633_reg_read(struct pcf50633 *pcf, u8 reg) | 
|  | { | 
|  | u8 val; | 
|  |  | 
|  | mutex_lock(&pcf->lock); | 
|  | __pcf50633_read(pcf, reg, 1, &val); | 
|  | mutex_unlock(&pcf->lock); | 
|  |  | 
|  | return val; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_reg_read); | 
|  |  | 
|  | int pcf50633_reg_write(struct pcf50633 *pcf, u8 reg, u8 val) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&pcf->lock); | 
|  | ret = __pcf50633_write(pcf, reg, 1, &val); | 
|  | mutex_unlock(&pcf->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_reg_write); | 
|  |  | 
|  | int pcf50633_reg_set_bit_mask(struct pcf50633 *pcf, u8 reg, u8 mask, u8 val) | 
|  | { | 
|  | int ret; | 
|  | u8 tmp; | 
|  |  | 
|  | val &= mask; | 
|  |  | 
|  | mutex_lock(&pcf->lock); | 
|  | ret = __pcf50633_read(pcf, reg, 1, &tmp); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | tmp &= ~mask; | 
|  | tmp |= val; | 
|  | ret = __pcf50633_write(pcf, reg, 1, &tmp); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&pcf->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_reg_set_bit_mask); | 
|  |  | 
|  | int pcf50633_reg_clear_bits(struct pcf50633 *pcf, u8 reg, u8 val) | 
|  | { | 
|  | int ret; | 
|  | u8 tmp; | 
|  |  | 
|  | mutex_lock(&pcf->lock); | 
|  | ret = __pcf50633_read(pcf, reg, 1, &tmp); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | tmp &= ~val; | 
|  | ret = __pcf50633_write(pcf, reg, 1, &tmp); | 
|  |  | 
|  | out: | 
|  | mutex_unlock(&pcf->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_reg_clear_bits); | 
|  |  | 
|  | /* sysfs attributes */ | 
|  | static ssize_t show_dump_regs(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct pcf50633 *pcf = dev_get_drvdata(dev); | 
|  | u8 dump[16]; | 
|  | int n, n1, idx = 0; | 
|  | char *buf1 = buf; | 
|  | static u8 address_no_read[] = { /* must be ascending */ | 
|  | PCF50633_REG_INT1, | 
|  | PCF50633_REG_INT2, | 
|  | PCF50633_REG_INT3, | 
|  | PCF50633_REG_INT4, | 
|  | PCF50633_REG_INT5, | 
|  | 0 /* terminator */ | 
|  | }; | 
|  |  | 
|  | for (n = 0; n < 256; n += sizeof(dump)) { | 
|  | for (n1 = 0; n1 < sizeof(dump); n1++) | 
|  | if (n == address_no_read[idx]) { | 
|  | idx++; | 
|  | dump[n1] = 0x00; | 
|  | } else | 
|  | dump[n1] = pcf50633_reg_read(pcf, n + n1); | 
|  |  | 
|  | hex_dump_to_buffer(dump, sizeof(dump), 16, 1, buf1, 128, 0); | 
|  | buf1 += strlen(buf1); | 
|  | *buf1++ = '\n'; | 
|  | *buf1 = '\0'; | 
|  | } | 
|  |  | 
|  | return buf1 - buf; | 
|  | } | 
|  | static DEVICE_ATTR(dump_regs, 0400, show_dump_regs, NULL); | 
|  |  | 
|  | static ssize_t show_resume_reason(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct pcf50633 *pcf = dev_get_drvdata(dev); | 
|  | int n; | 
|  |  | 
|  | n = sprintf(buf, "%02x%02x%02x%02x%02x\n", | 
|  | pcf->resume_reason[0], | 
|  | pcf->resume_reason[1], | 
|  | pcf->resume_reason[2], | 
|  | pcf->resume_reason[3], | 
|  | pcf->resume_reason[4]); | 
|  |  | 
|  | return n; | 
|  | } | 
|  | static DEVICE_ATTR(resume_reason, 0400, show_resume_reason, NULL); | 
|  |  | 
|  | static struct attribute *pcf_sysfs_entries[] = { | 
|  | &dev_attr_dump_regs.attr, | 
|  | &dev_attr_resume_reason.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group pcf_attr_group = { | 
|  | .name	= NULL,			/* put in device directory */ | 
|  | .attrs	= pcf_sysfs_entries, | 
|  | }; | 
|  |  | 
|  | int pcf50633_register_irq(struct pcf50633 *pcf, int irq, | 
|  | void (*handler) (int, void *), void *data) | 
|  | { | 
|  | if (irq < 0 || irq > PCF50633_NUM_IRQ || !handler) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (WARN_ON(pcf->irq_handler[irq].handler)) | 
|  | return -EBUSY; | 
|  |  | 
|  | mutex_lock(&pcf->lock); | 
|  | pcf->irq_handler[irq].handler = handler; | 
|  | pcf->irq_handler[irq].data = data; | 
|  | mutex_unlock(&pcf->lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_register_irq); | 
|  |  | 
|  | int pcf50633_free_irq(struct pcf50633 *pcf, int irq) | 
|  | { | 
|  | if (irq < 0 || irq > PCF50633_NUM_IRQ) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&pcf->lock); | 
|  | pcf->irq_handler[irq].handler = NULL; | 
|  | mutex_unlock(&pcf->lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_free_irq); | 
|  |  | 
|  | static int __pcf50633_irq_mask_set(struct pcf50633 *pcf, int irq, u8 mask) | 
|  | { | 
|  | u8 reg, bits, tmp; | 
|  | int ret = 0, idx; | 
|  |  | 
|  | idx = irq >> 3; | 
|  | reg =  PCF50633_REG_INT1M + idx; | 
|  | bits = 1 << (irq & 0x07); | 
|  |  | 
|  | mutex_lock(&pcf->lock); | 
|  |  | 
|  | if (mask) { | 
|  | ret = __pcf50633_read(pcf, reg, 1, &tmp); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | tmp |= bits; | 
|  |  | 
|  | ret = __pcf50633_write(pcf, reg, 1, &tmp); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | pcf->mask_regs[idx] &= ~bits; | 
|  | pcf->mask_regs[idx] |= bits; | 
|  | } else { | 
|  | ret = __pcf50633_read(pcf, reg, 1, &tmp); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | tmp &= ~bits; | 
|  |  | 
|  | ret = __pcf50633_write(pcf, reg, 1, &tmp); | 
|  | if (ret < 0) | 
|  | goto out; | 
|  |  | 
|  | pcf->mask_regs[idx] &= ~bits; | 
|  | } | 
|  | out: | 
|  | mutex_unlock(&pcf->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int pcf50633_irq_mask(struct pcf50633 *pcf, int irq) | 
|  | { | 
|  | dev_info(pcf->dev, "Masking IRQ %d\n", irq); | 
|  |  | 
|  | return __pcf50633_irq_mask_set(pcf, irq, 1); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_irq_mask); | 
|  |  | 
|  | int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq) | 
|  | { | 
|  | dev_info(pcf->dev, "Unmasking IRQ %d\n", irq); | 
|  |  | 
|  | return __pcf50633_irq_mask_set(pcf, irq, 0); | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_irq_unmask); | 
|  |  | 
|  | int pcf50633_irq_mask_get(struct pcf50633 *pcf, int irq) | 
|  | { | 
|  | u8 reg, bits; | 
|  |  | 
|  | reg =  irq >> 3; | 
|  | bits = 1 << (irq & 0x07); | 
|  |  | 
|  | return pcf->mask_regs[reg] & bits; | 
|  | } | 
|  | EXPORT_SYMBOL_GPL(pcf50633_irq_mask_get); | 
|  |  | 
|  | static void pcf50633_irq_call_handler(struct pcf50633 *pcf, int irq) | 
|  | { | 
|  | if (pcf->irq_handler[irq].handler) | 
|  | pcf->irq_handler[irq].handler(irq, pcf->irq_handler[irq].data); | 
|  | } | 
|  |  | 
|  | /* Maximum amount of time ONKEY is held before emergency action is taken */ | 
|  | #define PCF50633_ONKEY1S_TIMEOUT 8 | 
|  |  | 
|  | static void pcf50633_irq_worker(struct work_struct *work) | 
|  | { | 
|  | struct pcf50633 *pcf; | 
|  | int ret, i, j; | 
|  | u8 pcf_int[5], chgstat; | 
|  |  | 
|  | pcf = container_of(work, struct pcf50633, irq_work); | 
|  |  | 
|  | /* Read the 5 INT regs in one transaction */ | 
|  | ret = pcf50633_read_block(pcf, PCF50633_REG_INT1, | 
|  | ARRAY_SIZE(pcf_int), pcf_int); | 
|  | if (ret != ARRAY_SIZE(pcf_int)) { | 
|  | dev_err(pcf->dev, "Error reading INT registers\n"); | 
|  |  | 
|  | /* | 
|  | * If this doesn't ACK the interrupt to the chip, we'll be | 
|  | * called once again as we're level triggered. | 
|  | */ | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* We immediately read the usb and adapter status. We thus make sure | 
|  | * only of USBINS/USBREM IRQ handlers are called */ | 
|  | if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) { | 
|  | chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); | 
|  | if (chgstat & (0x3 << 4)) | 
|  | pcf_int[0] &= ~(1 << PCF50633_INT1_USBREM); | 
|  | else | 
|  | pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS); | 
|  | } | 
|  |  | 
|  | /* Make sure only one of ADPINS or ADPREM is set */ | 
|  | if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) { | 
|  | chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2); | 
|  | if (chgstat & (0x3 << 4)) | 
|  | pcf_int[0] &= ~(1 << PCF50633_INT1_ADPREM); | 
|  | else | 
|  | pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS); | 
|  | } | 
|  |  | 
|  | dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x " | 
|  | "INT4=0x%02x INT5=0x%02x\n", pcf_int[0], | 
|  | pcf_int[1], pcf_int[2], pcf_int[3], pcf_int[4]); | 
|  |  | 
|  | /* Some revisions of the chip don't have a 8s standby mode on | 
|  | * ONKEY1S press. We try to manually do it in such cases. */ | 
|  | if ((pcf_int[0] & PCF50633_INT1_SECOND) && pcf->onkey1s_held) { | 
|  | dev_info(pcf->dev, "ONKEY1S held for %d secs\n", | 
|  | pcf->onkey1s_held); | 
|  | if (pcf->onkey1s_held++ == PCF50633_ONKEY1S_TIMEOUT) | 
|  | if (pcf->pdata->force_shutdown) | 
|  | pcf->pdata->force_shutdown(pcf); | 
|  | } | 
|  |  | 
|  | if (pcf_int[2] & PCF50633_INT3_ONKEY1S) { | 
|  | dev_info(pcf->dev, "ONKEY1S held\n"); | 
|  | pcf->onkey1s_held = 1 ; | 
|  |  | 
|  | /* Unmask IRQ_SECOND */ | 
|  | pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT1M, | 
|  | PCF50633_INT1_SECOND); | 
|  |  | 
|  | /* Unmask IRQ_ONKEYR */ | 
|  | pcf50633_reg_clear_bits(pcf, PCF50633_REG_INT2M, | 
|  | PCF50633_INT2_ONKEYR); | 
|  | } | 
|  |  | 
|  | if ((pcf_int[1] & PCF50633_INT2_ONKEYR) && pcf->onkey1s_held) { | 
|  | pcf->onkey1s_held = 0; | 
|  |  | 
|  | /* Mask SECOND and ONKEYR interrupts */ | 
|  | if (pcf->mask_regs[0] & PCF50633_INT1_SECOND) | 
|  | pcf50633_reg_set_bit_mask(pcf, | 
|  | PCF50633_REG_INT1M, | 
|  | PCF50633_INT1_SECOND, | 
|  | PCF50633_INT1_SECOND); | 
|  |  | 
|  | if (pcf->mask_regs[1] & PCF50633_INT2_ONKEYR) | 
|  | pcf50633_reg_set_bit_mask(pcf, | 
|  | PCF50633_REG_INT2M, | 
|  | PCF50633_INT2_ONKEYR, | 
|  | PCF50633_INT2_ONKEYR); | 
|  | } | 
|  |  | 
|  | /* Have we just resumed ? */ | 
|  | if (pcf->is_suspended) { | 
|  | pcf->is_suspended = 0; | 
|  |  | 
|  | /* Set the resume reason filtering out non resumers */ | 
|  | for (i = 0; i < ARRAY_SIZE(pcf_int); i++) | 
|  | pcf->resume_reason[i] = pcf_int[i] & | 
|  | pcf->pdata->resumers[i]; | 
|  |  | 
|  | /* Make sure we don't pass on any ONKEY events to | 
|  | * userspace now */ | 
|  | pcf_int[1] &= ~(PCF50633_INT2_ONKEYR | PCF50633_INT2_ONKEYF); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(pcf_int); i++) { | 
|  | /* Unset masked interrupts */ | 
|  | pcf_int[i] &= ~pcf->mask_regs[i]; | 
|  |  | 
|  | for (j = 0; j < 8 ; j++) | 
|  | if (pcf_int[i] & (1 << j)) | 
|  | pcf50633_irq_call_handler(pcf, (i * 8) + j); | 
|  | } | 
|  |  | 
|  | out: | 
|  | put_device(pcf->dev); | 
|  | enable_irq(pcf->irq); | 
|  | } | 
|  |  | 
|  | static irqreturn_t pcf50633_irq(int irq, void *data) | 
|  | { | 
|  | struct pcf50633 *pcf = data; | 
|  |  | 
|  | dev_dbg(pcf->dev, "pcf50633_irq\n"); | 
|  |  | 
|  | get_device(pcf->dev); | 
|  | disable_irq(pcf->irq); | 
|  | schedule_work(&pcf->irq_work); | 
|  |  | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | static void | 
|  | pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name, | 
|  | struct platform_device **pdev) | 
|  | { | 
|  | struct pcf50633_subdev_pdata *subdev_pdata; | 
|  | int ret; | 
|  |  | 
|  | *pdev = platform_device_alloc(name, -1); | 
|  | if (!*pdev) { | 
|  | dev_err(pcf->dev, "Falied to allocate %s\n", name); | 
|  | return; | 
|  | } | 
|  |  | 
|  | subdev_pdata = kmalloc(sizeof(*subdev_pdata), GFP_KERNEL); | 
|  | if (!subdev_pdata) { | 
|  | dev_err(pcf->dev, "Error allocating subdev pdata\n"); | 
|  | platform_device_put(*pdev); | 
|  | } | 
|  |  | 
|  | subdev_pdata->pcf = pcf; | 
|  | platform_device_add_data(*pdev, subdev_pdata, sizeof(*subdev_pdata)); | 
|  |  | 
|  | (*pdev)->dev.parent = pcf->dev; | 
|  |  | 
|  | ret = platform_device_add(*pdev); | 
|  | if (ret) { | 
|  | dev_err(pcf->dev, "Failed to register %s: %d\n", name, ret); | 
|  | platform_device_put(*pdev); | 
|  | *pdev = NULL; | 
|  | } | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_PM | 
|  | static int pcf50633_suspend(struct device *dev, pm_message_t state) | 
|  | { | 
|  | struct pcf50633 *pcf; | 
|  | int ret = 0, i; | 
|  | u8 res[5]; | 
|  |  | 
|  | pcf = dev_get_drvdata(dev); | 
|  |  | 
|  | /* Make sure our interrupt handlers are not called | 
|  | * henceforth */ | 
|  | disable_irq(pcf->irq); | 
|  |  | 
|  | /* Make sure that any running IRQ worker has quit */ | 
|  | cancel_work_sync(&pcf->irq_work); | 
|  |  | 
|  | /* Save the masks */ | 
|  | ret = pcf50633_read_block(pcf, PCF50633_REG_INT1M, | 
|  | ARRAY_SIZE(pcf->suspend_irq_masks), | 
|  | pcf->suspend_irq_masks); | 
|  | if (ret < 0) { | 
|  | dev_err(pcf->dev, "error saving irq masks\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Write wakeup irq masks */ | 
|  | for (i = 0; i < ARRAY_SIZE(res); i++) | 
|  | res[i] = ~pcf->pdata->resumers[i]; | 
|  |  | 
|  | ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M, | 
|  | ARRAY_SIZE(res), &res[0]); | 
|  | if (ret < 0) { | 
|  | dev_err(pcf->dev, "error writing wakeup irq masks\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | pcf->is_suspended = 1; | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int pcf50633_resume(struct device *dev) | 
|  | { | 
|  | struct pcf50633 *pcf; | 
|  | int ret; | 
|  |  | 
|  | pcf = dev_get_drvdata(dev); | 
|  |  | 
|  | /* Write the saved mask registers */ | 
|  | ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M, | 
|  | ARRAY_SIZE(pcf->suspend_irq_masks), | 
|  | pcf->suspend_irq_masks); | 
|  | if (ret < 0) | 
|  | dev_err(pcf->dev, "Error restoring saved suspend masks\n"); | 
|  |  | 
|  | /* Restore regulators' state */ | 
|  |  | 
|  |  | 
|  | get_device(pcf->dev); | 
|  |  | 
|  | /* | 
|  | * Clear any pending interrupts and set resume reason if any. | 
|  | * This will leave with enable_irq() | 
|  | */ | 
|  | pcf50633_irq_worker(&pcf->irq_work); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define pcf50633_suspend NULL | 
|  | #define pcf50633_resume NULL | 
|  | #endif | 
|  |  | 
|  | static int __devinit pcf50633_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *ids) | 
|  | { | 
|  | struct pcf50633 *pcf; | 
|  | struct pcf50633_platform_data *pdata = client->dev.platform_data; | 
|  | int i, ret = 0; | 
|  | int version, variant; | 
|  |  | 
|  | pcf = kzalloc(sizeof(*pcf), GFP_KERNEL); | 
|  | if (!pcf) | 
|  | return -ENOMEM; | 
|  |  | 
|  | pcf->pdata = pdata; | 
|  |  | 
|  | mutex_init(&pcf->lock); | 
|  |  | 
|  | i2c_set_clientdata(client, pcf); | 
|  | pcf->dev = &client->dev; | 
|  | pcf->i2c_client = client; | 
|  | pcf->irq = client->irq; | 
|  |  | 
|  | INIT_WORK(&pcf->irq_work, pcf50633_irq_worker); | 
|  |  | 
|  | version = pcf50633_reg_read(pcf, 0); | 
|  | variant = pcf50633_reg_read(pcf, 1); | 
|  | if (version < 0 || variant < 0) { | 
|  | dev_err(pcf->dev, "Unable to probe pcf50633\n"); | 
|  | ret = -ENODEV; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | dev_info(pcf->dev, "Probed device version %d variant %d\n", | 
|  | version, variant); | 
|  |  | 
|  | /* Enable all interrupts except RTC SECOND */ | 
|  | pcf->mask_regs[0] = 0x80; | 
|  | pcf50633_reg_write(pcf, PCF50633_REG_INT1M, pcf->mask_regs[0]); | 
|  | pcf50633_reg_write(pcf, PCF50633_REG_INT2M, 0x00); | 
|  | pcf50633_reg_write(pcf, PCF50633_REG_INT3M, 0x00); | 
|  | pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00); | 
|  | pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00); | 
|  |  | 
|  | /* Create sub devices */ | 
|  | pcf50633_client_dev_register(pcf, "pcf50633-input", | 
|  | &pcf->input_pdev); | 
|  | pcf50633_client_dev_register(pcf, "pcf50633-rtc", | 
|  | &pcf->rtc_pdev); | 
|  | pcf50633_client_dev_register(pcf, "pcf50633-mbc", | 
|  | &pcf->mbc_pdev); | 
|  | pcf50633_client_dev_register(pcf, "pcf50633-adc", | 
|  | &pcf->adc_pdev); | 
|  |  | 
|  | for (i = 0; i < PCF50633_NUM_REGULATORS; i++) { | 
|  | struct platform_device *pdev; | 
|  |  | 
|  | pdev = platform_device_alloc("pcf50633-regltr", i); | 
|  | if (!pdev) { | 
|  | dev_err(pcf->dev, "Cannot create regulator\n"); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | pdev->dev.parent = pcf->dev; | 
|  | pdev->dev.platform_data = &pdata->reg_init_data[i]; | 
|  | pdev->dev.driver_data = pcf; | 
|  | pcf->regulator_pdev[i] = pdev; | 
|  |  | 
|  | platform_device_add(pdev); | 
|  | } | 
|  |  | 
|  | if (client->irq) { | 
|  | ret = request_irq(client->irq, pcf50633_irq, | 
|  | IRQF_TRIGGER_LOW, "pcf50633", pcf); | 
|  |  | 
|  | if (ret) { | 
|  | dev_err(pcf->dev, "Failed to request IRQ %d\n", ret); | 
|  | goto err; | 
|  | } | 
|  | } else { | 
|  | dev_err(pcf->dev, "No IRQ configured\n"); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | if (enable_irq_wake(client->irq) < 0) | 
|  | dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source" | 
|  | "in this hardware revision", client->irq); | 
|  |  | 
|  | ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group); | 
|  | if (ret) | 
|  | dev_err(pcf->dev, "error creating sysfs entries\n"); | 
|  |  | 
|  | if (pdata->probe_done) | 
|  | pdata->probe_done(pcf); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | kfree(pcf); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int __devexit pcf50633_remove(struct i2c_client *client) | 
|  | { | 
|  | struct pcf50633 *pcf = i2c_get_clientdata(client); | 
|  | int i; | 
|  |  | 
|  | free_irq(pcf->irq, pcf); | 
|  |  | 
|  | platform_device_unregister(pcf->input_pdev); | 
|  | platform_device_unregister(pcf->rtc_pdev); | 
|  | platform_device_unregister(pcf->mbc_pdev); | 
|  | platform_device_unregister(pcf->adc_pdev); | 
|  |  | 
|  | for (i = 0; i < PCF50633_NUM_REGULATORS; i++) | 
|  | platform_device_unregister(pcf->regulator_pdev[i]); | 
|  |  | 
|  | kfree(pcf); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct i2c_device_id pcf50633_id_table[] = { | 
|  | {"pcf50633", 0x73}, | 
|  | {/* end of list */} | 
|  | }; | 
|  |  | 
|  | static struct i2c_driver pcf50633_driver = { | 
|  | .driver = { | 
|  | .name	= "pcf50633", | 
|  | .suspend = pcf50633_suspend, | 
|  | .resume	= pcf50633_resume, | 
|  | }, | 
|  | .id_table = pcf50633_id_table, | 
|  | .probe = pcf50633_probe, | 
|  | .remove = __devexit_p(pcf50633_remove), | 
|  | }; | 
|  |  | 
|  | static int __init pcf50633_init(void) | 
|  | { | 
|  | return i2c_add_driver(&pcf50633_driver); | 
|  | } | 
|  |  | 
|  | static void __exit pcf50633_exit(void) | 
|  | { | 
|  | i2c_del_driver(&pcf50633_driver); | 
|  | } | 
|  |  | 
|  | MODULE_DESCRIPTION("I2C chip driver for NXP PCF50633 PMU"); | 
|  | MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>"); | 
|  | MODULE_LICENSE("GPL"); | 
|  |  | 
|  | module_init(pcf50633_init); | 
|  | module_exit(pcf50633_exit); |