|  | /** | 
|  | * drivers/usb/class/usbtmc.c - USB Test & Measurement class driver | 
|  | * | 
|  | * Copyright (C) 2007 Stefan Kopp, Gechingen, Germany | 
|  | * Copyright (C) 2008 Novell, Inc. | 
|  | * Copyright (C) 2008 Greg Kroah-Hartman <gregkh@suse.de> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License | 
|  | * as published by the Free Software Foundation; either version 2 | 
|  | * of the License, or (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * The GNU General Public License is available at | 
|  | * http://www.gnu.org/copyleft/gpl.html. | 
|  | */ | 
|  |  | 
|  | #include <linux/init.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/fs.h> | 
|  | #include <linux/uaccess.h> | 
|  | #include <linux/kref.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/tmc.h> | 
|  |  | 
|  |  | 
|  | #define RIGOL			1 | 
|  | #define USBTMC_HEADER_SIZE	12 | 
|  | #define USBTMC_MINOR_BASE	176 | 
|  |  | 
|  | /* | 
|  | * Size of driver internal IO buffer. Must be multiple of 4 and at least as | 
|  | * large as wMaxPacketSize (which is usually 512 bytes). | 
|  | */ | 
|  | #define USBTMC_SIZE_IOBUFFER	2048 | 
|  |  | 
|  | /* Default USB timeout (in milliseconds) */ | 
|  | #define USBTMC_TIMEOUT		5000 | 
|  |  | 
|  | /* | 
|  | * Maximum number of read cycles to empty bulk in endpoint during CLEAR and | 
|  | * ABORT_BULK_IN requests. Ends the loop if (for whatever reason) a short | 
|  | * packet is never read. | 
|  | */ | 
|  | #define USBTMC_MAX_READS_TO_CLEAR_BULK_IN	100 | 
|  |  | 
|  | static const struct usb_device_id usbtmc_devices[] = { | 
|  | { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, | 
|  | { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), }, | 
|  | { 0, } /* terminating entry */ | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(usb, usbtmc_devices); | 
|  |  | 
|  | /* | 
|  | * This structure is the capabilities for the device | 
|  | * See section 4.2.1.8 of the USBTMC specification, | 
|  | * and section 4.2.2 of the USBTMC usb488 subclass | 
|  | * specification for details. | 
|  | */ | 
|  | struct usbtmc_dev_capabilities { | 
|  | __u8 interface_capabilities; | 
|  | __u8 device_capabilities; | 
|  | __u8 usb488_interface_capabilities; | 
|  | __u8 usb488_device_capabilities; | 
|  | }; | 
|  |  | 
|  | /* This structure holds private data for each USBTMC device. One copy is | 
|  | * allocated for each USBTMC device in the driver's probe function. | 
|  | */ | 
|  | struct usbtmc_device_data { | 
|  | const struct usb_device_id *id; | 
|  | struct usb_device *usb_dev; | 
|  | struct usb_interface *intf; | 
|  |  | 
|  | unsigned int bulk_in; | 
|  | unsigned int bulk_out; | 
|  |  | 
|  | u8 bTag; | 
|  | u8 bTag_last_write;	/* needed for abort */ | 
|  | u8 bTag_last_read;	/* needed for abort */ | 
|  |  | 
|  | u8 rigol_quirk; | 
|  |  | 
|  | /* attributes from the USB TMC spec for this device */ | 
|  | u8 TermChar; | 
|  | bool TermCharEnabled; | 
|  | bool auto_abort; | 
|  |  | 
|  | bool zombie; /* fd of disconnected device */ | 
|  |  | 
|  | struct usbtmc_dev_capabilities	capabilities; | 
|  | struct kref kref; | 
|  | struct mutex io_mutex;	/* only one i/o function running at a time */ | 
|  | }; | 
|  | #define to_usbtmc_data(d) container_of(d, struct usbtmc_device_data, kref) | 
|  |  | 
|  | struct usbtmc_ID_rigol_quirk { | 
|  | __u16 idVendor; | 
|  | __u16 idProduct; | 
|  | }; | 
|  |  | 
|  | static const struct usbtmc_ID_rigol_quirk usbtmc_id_quirk[] = { | 
|  | { 0x1ab1, 0x0588 }, | 
|  | { 0, 0 } | 
|  | }; | 
|  |  | 
|  | /* Forward declarations */ | 
|  | static struct usb_driver usbtmc_driver; | 
|  |  | 
|  | static void usbtmc_delete(struct kref *kref) | 
|  | { | 
|  | struct usbtmc_device_data *data = to_usbtmc_data(kref); | 
|  |  | 
|  | usb_put_dev(data->usb_dev); | 
|  | kfree(data); | 
|  | } | 
|  |  | 
|  | static int usbtmc_open(struct inode *inode, struct file *filp) | 
|  | { | 
|  | struct usb_interface *intf; | 
|  | struct usbtmc_device_data *data; | 
|  | int retval = 0; | 
|  |  | 
|  | intf = usb_find_interface(&usbtmc_driver, iminor(inode)); | 
|  | if (!intf) { | 
|  | printk(KERN_ERR KBUILD_MODNAME | 
|  | ": can not find device for minor %d", iminor(inode)); | 
|  | retval = -ENODEV; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | data = usb_get_intfdata(intf); | 
|  | kref_get(&data->kref); | 
|  |  | 
|  | /* Store pointer in file structure's private data field */ | 
|  | filp->private_data = data; | 
|  |  | 
|  | exit: | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int usbtmc_release(struct inode *inode, struct file *file) | 
|  | { | 
|  | struct usbtmc_device_data *data = file->private_data; | 
|  |  | 
|  | kref_put(&data->kref, usbtmc_delete); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbtmc_ioctl_abort_bulk_in(struct usbtmc_device_data *data) | 
|  | { | 
|  | u8 *buffer; | 
|  | struct device *dev; | 
|  | int rv; | 
|  | int n; | 
|  | int actual; | 
|  | struct usb_host_interface *current_setting; | 
|  | int max_size; | 
|  |  | 
|  | dev = &data->intf->dev; | 
|  | buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rv = usb_control_msg(data->usb_dev, | 
|  | usb_rcvctrlpipe(data->usb_dev, 0), | 
|  | USBTMC_REQUEST_INITIATE_ABORT_BULK_IN, | 
|  | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, | 
|  | data->bTag_last_read, data->bulk_in, | 
|  | buffer, 2, USBTMC_TIMEOUT); | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]); | 
|  |  | 
|  | if (buffer[0] == USBTMC_STATUS_FAILED) { | 
|  | rv = 0; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (buffer[0] != USBTMC_STATUS_SUCCESS) { | 
|  | dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n", | 
|  | buffer[0]); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | max_size = 0; | 
|  | current_setting = data->intf->cur_altsetting; | 
|  | for (n = 0; n < current_setting->desc.bNumEndpoints; n++) | 
|  | if (current_setting->endpoint[n].desc.bEndpointAddress == | 
|  | data->bulk_in) | 
|  | max_size = usb_endpoint_maxp(¤t_setting->endpoint[n].desc); | 
|  |  | 
|  | if (max_size == 0) { | 
|  | dev_err(dev, "Couldn't get wMaxPacketSize\n"); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | dev_dbg(&data->intf->dev, "wMaxPacketSize is %d\n", max_size); | 
|  |  | 
|  | n = 0; | 
|  |  | 
|  | do { | 
|  | dev_dbg(dev, "Reading from bulk in EP\n"); | 
|  |  | 
|  | rv = usb_bulk_msg(data->usb_dev, | 
|  | usb_rcvbulkpipe(data->usb_dev, | 
|  | data->bulk_in), | 
|  | buffer, USBTMC_SIZE_IOBUFFER, | 
|  | &actual, USBTMC_TIMEOUT); | 
|  |  | 
|  | n++; | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_bulk_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  | } while ((actual == max_size) && | 
|  | (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); | 
|  |  | 
|  | if (actual == max_size) { | 
|  | dev_err(dev, "Couldn't clear device buffer within %d cycles\n", | 
|  | USBTMC_MAX_READS_TO_CLEAR_BULK_IN); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | n = 0; | 
|  |  | 
|  | usbtmc_abort_bulk_in_status: | 
|  | rv = usb_control_msg(data->usb_dev, | 
|  | usb_rcvctrlpipe(data->usb_dev, 0), | 
|  | USBTMC_REQUEST_CHECK_ABORT_BULK_IN_STATUS, | 
|  | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, | 
|  | 0, data->bulk_in, buffer, 0x08, | 
|  | USBTMC_TIMEOUT); | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]); | 
|  |  | 
|  | if (buffer[0] == USBTMC_STATUS_SUCCESS) { | 
|  | rv = 0; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (buffer[0] != USBTMC_STATUS_PENDING) { | 
|  | dev_err(dev, "INITIATE_ABORT_BULK_IN returned %x\n", buffer[0]); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (buffer[1] == 1) | 
|  | do { | 
|  | dev_dbg(dev, "Reading from bulk in EP\n"); | 
|  |  | 
|  | rv = usb_bulk_msg(data->usb_dev, | 
|  | usb_rcvbulkpipe(data->usb_dev, | 
|  | data->bulk_in), | 
|  | buffer, USBTMC_SIZE_IOBUFFER, | 
|  | &actual, USBTMC_TIMEOUT); | 
|  |  | 
|  | n++; | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_bulk_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  | } while ((actual == max_size) && | 
|  | (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); | 
|  |  | 
|  | if (actual == max_size) { | 
|  | dev_err(dev, "Couldn't clear device buffer within %d cycles\n", | 
|  | USBTMC_MAX_READS_TO_CLEAR_BULK_IN); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | goto usbtmc_abort_bulk_in_status; | 
|  |  | 
|  | exit: | 
|  | kfree(buffer); | 
|  | return rv; | 
|  |  | 
|  | } | 
|  |  | 
|  | static int usbtmc_ioctl_abort_bulk_out(struct usbtmc_device_data *data) | 
|  | { | 
|  | struct device *dev; | 
|  | u8 *buffer; | 
|  | int rv; | 
|  | int n; | 
|  |  | 
|  | dev = &data->intf->dev; | 
|  |  | 
|  | buffer = kmalloc(8, GFP_KERNEL); | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rv = usb_control_msg(data->usb_dev, | 
|  | usb_rcvctrlpipe(data->usb_dev, 0), | 
|  | USBTMC_REQUEST_INITIATE_ABORT_BULK_OUT, | 
|  | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, | 
|  | data->bTag_last_write, data->bulk_out, | 
|  | buffer, 2, USBTMC_TIMEOUT); | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "INITIATE_ABORT_BULK_OUT returned %x\n", buffer[0]); | 
|  |  | 
|  | if (buffer[0] != USBTMC_STATUS_SUCCESS) { | 
|  | dev_err(dev, "INITIATE_ABORT_BULK_OUT returned %x\n", | 
|  | buffer[0]); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | n = 0; | 
|  |  | 
|  | usbtmc_abort_bulk_out_check_status: | 
|  | rv = usb_control_msg(data->usb_dev, | 
|  | usb_rcvctrlpipe(data->usb_dev, 0), | 
|  | USBTMC_REQUEST_CHECK_ABORT_BULK_OUT_STATUS, | 
|  | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_ENDPOINT, | 
|  | 0, data->bulk_out, buffer, 0x08, | 
|  | USBTMC_TIMEOUT); | 
|  | n++; | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "CHECK_ABORT_BULK_OUT returned %x\n", buffer[0]); | 
|  |  | 
|  | if (buffer[0] == USBTMC_STATUS_SUCCESS) | 
|  | goto usbtmc_abort_bulk_out_clear_halt; | 
|  |  | 
|  | if ((buffer[0] == USBTMC_STATUS_PENDING) && | 
|  | (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)) | 
|  | goto usbtmc_abort_bulk_out_check_status; | 
|  |  | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  |  | 
|  | usbtmc_abort_bulk_out_clear_halt: | 
|  | rv = usb_clear_halt(data->usb_dev, | 
|  | usb_sndbulkpipe(data->usb_dev, data->bulk_out)); | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  | rv = 0; | 
|  |  | 
|  | exit: | 
|  | kfree(buffer); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sends a REQUEST_DEV_DEP_MSG_IN message on the Bulk-IN endpoint. | 
|  | * @transfer_size: number of bytes to request from the device. | 
|  | * | 
|  | * See the USBTMC specification, Table 4. | 
|  | * | 
|  | * Also updates bTag_last_write. | 
|  | */ | 
|  | static int send_request_dev_dep_msg_in(struct usbtmc_device_data *data, size_t transfer_size) | 
|  | { | 
|  | int retval; | 
|  | u8 buffer[USBTMC_HEADER_SIZE]; | 
|  | int actual; | 
|  |  | 
|  | /* Setup IO buffer for REQUEST_DEV_DEP_MSG_IN message | 
|  | * Refer to class specs for details | 
|  | */ | 
|  | buffer[0] = 2; | 
|  | buffer[1] = data->bTag; | 
|  | buffer[2] = ~(data->bTag); | 
|  | buffer[3] = 0; /* Reserved */ | 
|  | buffer[4] = (transfer_size) & 255; | 
|  | buffer[5] = ((transfer_size) >> 8) & 255; | 
|  | buffer[6] = ((transfer_size) >> 16) & 255; | 
|  | buffer[7] = ((transfer_size) >> 24) & 255; | 
|  | buffer[8] = data->TermCharEnabled * 2; | 
|  | /* Use term character? */ | 
|  | buffer[9] = data->TermChar; | 
|  | buffer[10] = 0; /* Reserved */ | 
|  | buffer[11] = 0; /* Reserved */ | 
|  |  | 
|  | /* Send bulk URB */ | 
|  | retval = usb_bulk_msg(data->usb_dev, | 
|  | usb_sndbulkpipe(data->usb_dev, | 
|  | data->bulk_out), | 
|  | buffer, USBTMC_HEADER_SIZE, &actual, USBTMC_TIMEOUT); | 
|  |  | 
|  | /* Store bTag (in case we need to abort) */ | 
|  | data->bTag_last_write = data->bTag; | 
|  |  | 
|  | /* Increment bTag -- and increment again if zero */ | 
|  | data->bTag++; | 
|  | if (!data->bTag) | 
|  | (data->bTag)++; | 
|  |  | 
|  | if (retval < 0) { | 
|  | dev_err(&data->intf->dev, "usb_bulk_msg in send_request_dev_dep_msg_in() returned %d\n", retval); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t usbtmc_read(struct file *filp, char __user *buf, | 
|  | size_t count, loff_t *f_pos) | 
|  | { | 
|  | struct usbtmc_device_data *data; | 
|  | struct device *dev; | 
|  | u32 n_characters; | 
|  | u8 *buffer; | 
|  | int actual; | 
|  | size_t done; | 
|  | size_t remaining; | 
|  | int retval; | 
|  | size_t this_part; | 
|  |  | 
|  | /* Get pointer to private data structure */ | 
|  | data = filp->private_data; | 
|  | dev = &data->intf->dev; | 
|  |  | 
|  | buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_lock(&data->io_mutex); | 
|  | if (data->zombie) { | 
|  | retval = -ENODEV; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (data->rigol_quirk) { | 
|  | dev_dbg(dev, "usb_bulk_msg_in: count(%zu)\n", count); | 
|  |  | 
|  | retval = send_request_dev_dep_msg_in(data, count); | 
|  |  | 
|  | if (retval < 0) { | 
|  | if (data->auto_abort) | 
|  | usbtmc_ioctl_abort_bulk_out(data); | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Loop until we have fetched everything we requested */ | 
|  | remaining = count; | 
|  | this_part = remaining; | 
|  | done = 0; | 
|  |  | 
|  | while (remaining > 0) { | 
|  | if (!(data->rigol_quirk)) { | 
|  | dev_dbg(dev, "usb_bulk_msg_in: remaining(%zu), count(%zu)\n", remaining, count); | 
|  |  | 
|  | if (remaining > USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE - 3) | 
|  | this_part = USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE - 3; | 
|  | else | 
|  | this_part = remaining; | 
|  |  | 
|  | retval = send_request_dev_dep_msg_in(data, this_part); | 
|  | if (retval < 0) { | 
|  | dev_err(dev, "usb_bulk_msg returned %d\n", retval); | 
|  | if (data->auto_abort) | 
|  | usbtmc_ioctl_abort_bulk_out(data); | 
|  | goto exit; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Send bulk URB */ | 
|  | retval = usb_bulk_msg(data->usb_dev, | 
|  | usb_rcvbulkpipe(data->usb_dev, | 
|  | data->bulk_in), | 
|  | buffer, USBTMC_SIZE_IOBUFFER, &actual, | 
|  | USBTMC_TIMEOUT); | 
|  |  | 
|  | dev_dbg(dev, "usb_bulk_msg: retval(%u), done(%zu), remaining(%zu), actual(%d)\n", retval, done, remaining, actual); | 
|  |  | 
|  | /* Store bTag (in case we need to abort) */ | 
|  | data->bTag_last_read = data->bTag; | 
|  |  | 
|  | if (retval < 0) { | 
|  | dev_dbg(dev, "Unable to read data, error %d\n", retval); | 
|  | if (data->auto_abort) | 
|  | usbtmc_ioctl_abort_bulk_in(data); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* Parse header in first packet */ | 
|  | if ((done == 0) || (!(data->rigol_quirk))) { | 
|  | /* Sanity checks for the header */ | 
|  | if (actual < USBTMC_HEADER_SIZE) { | 
|  | dev_err(dev, "Device sent too small first packet: %u < %u\n", actual, USBTMC_HEADER_SIZE); | 
|  | if (data->auto_abort) | 
|  | usbtmc_ioctl_abort_bulk_in(data); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (buffer[0] != 2) { | 
|  | dev_err(dev, "Device sent reply with wrong MsgID: %u != 2\n", buffer[0]); | 
|  | if (data->auto_abort) | 
|  | usbtmc_ioctl_abort_bulk_in(data); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (buffer[1] != data->bTag_last_write) { | 
|  | dev_err(dev, "Device sent reply with wrong bTag: %u != %u\n", buffer[1], data->bTag_last_write); | 
|  | if (data->auto_abort) | 
|  | usbtmc_ioctl_abort_bulk_in(data); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* How many characters did the instrument send? */ | 
|  | n_characters = buffer[4] + | 
|  | (buffer[5] << 8) + | 
|  | (buffer[6] << 16) + | 
|  | (buffer[7] << 24); | 
|  |  | 
|  | if (n_characters > this_part) { | 
|  | dev_err(dev, "Device wants to return more data than requested: %u > %zu\n", n_characters, count); | 
|  | if (data->auto_abort) | 
|  | usbtmc_ioctl_abort_bulk_in(data); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | /* Remove the USBTMC header */ | 
|  | actual -= USBTMC_HEADER_SIZE; | 
|  |  | 
|  | /* Check if the message is smaller than requested */ | 
|  | if (data->rigol_quirk) { | 
|  | if (remaining > n_characters) | 
|  | remaining = n_characters; | 
|  | /* Remove padding if it exists */ | 
|  | if (actual > remaining) | 
|  | actual = remaining; | 
|  | } | 
|  | else { | 
|  | if (this_part > n_characters) | 
|  | this_part = n_characters; | 
|  | /* Remove padding if it exists */ | 
|  | if (actual > this_part) | 
|  | actual = this_part; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "Bulk-IN header: N_characters(%u), bTransAttr(%u)\n", n_characters, buffer[8]); | 
|  |  | 
|  | remaining -= actual; | 
|  |  | 
|  | /* Terminate if end-of-message bit received from device */ | 
|  | if ((buffer[8] &  0x01) && (actual >= n_characters)) | 
|  | remaining = 0; | 
|  |  | 
|  | dev_dbg(dev, "Bulk-IN header: remaining(%zu), buf(%p), buffer(%p) done(%zu)\n", remaining,buf,buffer,done); | 
|  |  | 
|  |  | 
|  | /* Copy buffer to user space */ | 
|  | if (copy_to_user(buf + done, &buffer[USBTMC_HEADER_SIZE], actual)) { | 
|  | /* There must have been an addressing problem */ | 
|  | retval = -EFAULT; | 
|  | goto exit; | 
|  | } | 
|  | done += actual; | 
|  | } | 
|  | else  { | 
|  | if (actual > remaining) | 
|  | actual = remaining; | 
|  |  | 
|  | remaining -= actual; | 
|  |  | 
|  | dev_dbg(dev, "Bulk-IN header cont: actual(%u), done(%zu), remaining(%zu), buf(%p), buffer(%p)\n", actual, done, remaining,buf,buffer); | 
|  |  | 
|  | /* Copy buffer to user space */ | 
|  | if (copy_to_user(buf + done, buffer, actual)) { | 
|  | /* There must have been an addressing problem */ | 
|  | retval = -EFAULT; | 
|  | goto exit; | 
|  | } | 
|  | done += actual; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Update file position value */ | 
|  | *f_pos = *f_pos + done; | 
|  | retval = done; | 
|  |  | 
|  | exit: | 
|  | mutex_unlock(&data->io_mutex); | 
|  | kfree(buffer); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static ssize_t usbtmc_write(struct file *filp, const char __user *buf, | 
|  | size_t count, loff_t *f_pos) | 
|  | { | 
|  | struct usbtmc_device_data *data; | 
|  | u8 *buffer; | 
|  | int retval; | 
|  | int actual; | 
|  | unsigned long int n_bytes; | 
|  | int remaining; | 
|  | int done; | 
|  | int this_part; | 
|  |  | 
|  | data = filp->private_data; | 
|  |  | 
|  | buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | mutex_lock(&data->io_mutex); | 
|  | if (data->zombie) { | 
|  | retval = -ENODEV; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | remaining = count; | 
|  | done = 0; | 
|  |  | 
|  | while (remaining > 0) { | 
|  | if (remaining > USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE) { | 
|  | this_part = USBTMC_SIZE_IOBUFFER - USBTMC_HEADER_SIZE; | 
|  | buffer[8] = 0; | 
|  | } else { | 
|  | this_part = remaining; | 
|  | buffer[8] = 1; | 
|  | } | 
|  |  | 
|  | /* Setup IO buffer for DEV_DEP_MSG_OUT message */ | 
|  | buffer[0] = 1; | 
|  | buffer[1] = data->bTag; | 
|  | buffer[2] = ~(data->bTag); | 
|  | buffer[3] = 0; /* Reserved */ | 
|  | buffer[4] = this_part & 255; | 
|  | buffer[5] = (this_part >> 8) & 255; | 
|  | buffer[6] = (this_part >> 16) & 255; | 
|  | buffer[7] = (this_part >> 24) & 255; | 
|  | /* buffer[8] is set above... */ | 
|  | buffer[9] = 0; /* Reserved */ | 
|  | buffer[10] = 0; /* Reserved */ | 
|  | buffer[11] = 0; /* Reserved */ | 
|  |  | 
|  | if (copy_from_user(&buffer[USBTMC_HEADER_SIZE], buf + done, this_part)) { | 
|  | retval = -EFAULT; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | n_bytes = roundup(USBTMC_HEADER_SIZE + this_part, 4); | 
|  | memset(buffer + USBTMC_HEADER_SIZE + this_part, 0, n_bytes - (USBTMC_HEADER_SIZE + this_part)); | 
|  |  | 
|  | do { | 
|  | retval = usb_bulk_msg(data->usb_dev, | 
|  | usb_sndbulkpipe(data->usb_dev, | 
|  | data->bulk_out), | 
|  | buffer, n_bytes, | 
|  | &actual, USBTMC_TIMEOUT); | 
|  | if (retval != 0) | 
|  | break; | 
|  | n_bytes -= actual; | 
|  | } while (n_bytes); | 
|  |  | 
|  | data->bTag_last_write = data->bTag; | 
|  | data->bTag++; | 
|  |  | 
|  | if (!data->bTag) | 
|  | data->bTag++; | 
|  |  | 
|  | if (retval < 0) { | 
|  | dev_err(&data->intf->dev, | 
|  | "Unable to send data, error %d\n", retval); | 
|  | if (data->auto_abort) | 
|  | usbtmc_ioctl_abort_bulk_out(data); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | remaining -= this_part; | 
|  | done += this_part; | 
|  | } | 
|  |  | 
|  | retval = count; | 
|  | exit: | 
|  | mutex_unlock(&data->io_mutex); | 
|  | kfree(buffer); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static int usbtmc_ioctl_clear(struct usbtmc_device_data *data) | 
|  | { | 
|  | struct usb_host_interface *current_setting; | 
|  | struct usb_endpoint_descriptor *desc; | 
|  | struct device *dev; | 
|  | u8 *buffer; | 
|  | int rv; | 
|  | int n; | 
|  | int actual; | 
|  | int max_size; | 
|  |  | 
|  | dev = &data->intf->dev; | 
|  |  | 
|  | dev_dbg(dev, "Sending INITIATE_CLEAR request\n"); | 
|  |  | 
|  | buffer = kmalloc(USBTMC_SIZE_IOBUFFER, GFP_KERNEL); | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rv = usb_control_msg(data->usb_dev, | 
|  | usb_rcvctrlpipe(data->usb_dev, 0), | 
|  | USBTMC_REQUEST_INITIATE_CLEAR, | 
|  | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | 
|  | 0, 0, buffer, 1, USBTMC_TIMEOUT); | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "INITIATE_CLEAR returned %x\n", buffer[0]); | 
|  |  | 
|  | if (buffer[0] != USBTMC_STATUS_SUCCESS) { | 
|  | dev_err(dev, "INITIATE_CLEAR returned %x\n", buffer[0]); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | max_size = 0; | 
|  | current_setting = data->intf->cur_altsetting; | 
|  | for (n = 0; n < current_setting->desc.bNumEndpoints; n++) { | 
|  | desc = ¤t_setting->endpoint[n].desc; | 
|  | if (desc->bEndpointAddress == data->bulk_in) | 
|  | max_size = usb_endpoint_maxp(desc); | 
|  | } | 
|  |  | 
|  | if (max_size == 0) { | 
|  | dev_err(dev, "Couldn't get wMaxPacketSize\n"); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "wMaxPacketSize is %d\n", max_size); | 
|  |  | 
|  | n = 0; | 
|  |  | 
|  | usbtmc_clear_check_status: | 
|  |  | 
|  | dev_dbg(dev, "Sending CHECK_CLEAR_STATUS request\n"); | 
|  |  | 
|  | rv = usb_control_msg(data->usb_dev, | 
|  | usb_rcvctrlpipe(data->usb_dev, 0), | 
|  | USBTMC_REQUEST_CHECK_CLEAR_STATUS, | 
|  | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | 
|  | 0, 0, buffer, 2, USBTMC_TIMEOUT); | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]); | 
|  |  | 
|  | if (buffer[0] == USBTMC_STATUS_SUCCESS) | 
|  | goto usbtmc_clear_bulk_out_halt; | 
|  |  | 
|  | if (buffer[0] != USBTMC_STATUS_PENDING) { | 
|  | dev_err(dev, "CHECK_CLEAR_STATUS returned %x\n", buffer[0]); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | if (buffer[1] == 1) | 
|  | do { | 
|  | dev_dbg(dev, "Reading from bulk in EP\n"); | 
|  |  | 
|  | rv = usb_bulk_msg(data->usb_dev, | 
|  | usb_rcvbulkpipe(data->usb_dev, | 
|  | data->bulk_in), | 
|  | buffer, USBTMC_SIZE_IOBUFFER, | 
|  | &actual, USBTMC_TIMEOUT); | 
|  | n++; | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", | 
|  | rv); | 
|  | goto exit; | 
|  | } | 
|  | } while ((actual == max_size) && | 
|  | (n < USBTMC_MAX_READS_TO_CLEAR_BULK_IN)); | 
|  |  | 
|  | if (actual == max_size) { | 
|  | dev_err(dev, "Couldn't clear device buffer within %d cycles\n", | 
|  | USBTMC_MAX_READS_TO_CLEAR_BULK_IN); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | goto usbtmc_clear_check_status; | 
|  |  | 
|  | usbtmc_clear_bulk_out_halt: | 
|  |  | 
|  | rv = usb_clear_halt(data->usb_dev, | 
|  | usb_sndbulkpipe(data->usb_dev, data->bulk_out)); | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  | rv = 0; | 
|  |  | 
|  | exit: | 
|  | kfree(buffer); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static int usbtmc_ioctl_clear_out_halt(struct usbtmc_device_data *data) | 
|  | { | 
|  | int rv; | 
|  |  | 
|  | rv = usb_clear_halt(data->usb_dev, | 
|  | usb_sndbulkpipe(data->usb_dev, data->bulk_out)); | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", | 
|  | rv); | 
|  | return rv; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbtmc_ioctl_clear_in_halt(struct usbtmc_device_data *data) | 
|  | { | 
|  | int rv; | 
|  |  | 
|  | rv = usb_clear_halt(data->usb_dev, | 
|  | usb_rcvbulkpipe(data->usb_dev, data->bulk_in)); | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(&data->usb_dev->dev, "usb_control_msg returned %d\n", | 
|  | rv); | 
|  | return rv; | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int get_capabilities(struct usbtmc_device_data *data) | 
|  | { | 
|  | struct device *dev = &data->usb_dev->dev; | 
|  | char *buffer; | 
|  | int rv = 0; | 
|  |  | 
|  | buffer = kmalloc(0x18, GFP_KERNEL); | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rv = usb_control_msg(data->usb_dev, usb_rcvctrlpipe(data->usb_dev, 0), | 
|  | USBTMC_REQUEST_GET_CAPABILITIES, | 
|  | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | 
|  | 0, 0, buffer, 0x18, USBTMC_TIMEOUT); | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto err_out; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); | 
|  | if (buffer[0] != USBTMC_STATUS_SUCCESS) { | 
|  | dev_err(dev, "GET_CAPABILITIES returned %x\n", buffer[0]); | 
|  | rv = -EPERM; | 
|  | goto err_out; | 
|  | } | 
|  | dev_dbg(dev, "Interface capabilities are %x\n", buffer[4]); | 
|  | dev_dbg(dev, "Device capabilities are %x\n", buffer[5]); | 
|  | dev_dbg(dev, "USB488 interface capabilities are %x\n", buffer[14]); | 
|  | dev_dbg(dev, "USB488 device capabilities are %x\n", buffer[15]); | 
|  |  | 
|  | data->capabilities.interface_capabilities = buffer[4]; | 
|  | data->capabilities.device_capabilities = buffer[5]; | 
|  | data->capabilities.usb488_interface_capabilities = buffer[14]; | 
|  | data->capabilities.usb488_device_capabilities = buffer[15]; | 
|  | rv = 0; | 
|  |  | 
|  | err_out: | 
|  | kfree(buffer); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | #define capability_attribute(name)					\ | 
|  | static ssize_t show_##name(struct device *dev,				\ | 
|  | struct device_attribute *attr, char *buf)	\ | 
|  | {									\ | 
|  | struct usb_interface *intf = to_usb_interface(dev);		\ | 
|  | struct usbtmc_device_data *data = usb_get_intfdata(intf);	\ | 
|  | \ | 
|  | return sprintf(buf, "%d\n", data->capabilities.name);		\ | 
|  | }									\ | 
|  | static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL) | 
|  |  | 
|  | capability_attribute(interface_capabilities); | 
|  | capability_attribute(device_capabilities); | 
|  | capability_attribute(usb488_interface_capabilities); | 
|  | capability_attribute(usb488_device_capabilities); | 
|  |  | 
|  | static struct attribute *capability_attrs[] = { | 
|  | &dev_attr_interface_capabilities.attr, | 
|  | &dev_attr_device_capabilities.attr, | 
|  | &dev_attr_usb488_interface_capabilities.attr, | 
|  | &dev_attr_usb488_device_capabilities.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group capability_attr_grp = { | 
|  | .attrs = capability_attrs, | 
|  | }; | 
|  |  | 
|  | static ssize_t show_TermChar(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct usb_interface *intf = to_usb_interface(dev); | 
|  | struct usbtmc_device_data *data = usb_get_intfdata(intf); | 
|  |  | 
|  | return sprintf(buf, "%c\n", data->TermChar); | 
|  | } | 
|  |  | 
|  | static ssize_t store_TermChar(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct usb_interface *intf = to_usb_interface(dev); | 
|  | struct usbtmc_device_data *data = usb_get_intfdata(intf); | 
|  |  | 
|  | if (count < 1) | 
|  | return -EINVAL; | 
|  | data->TermChar = buf[0]; | 
|  | return count; | 
|  | } | 
|  | static DEVICE_ATTR(TermChar, S_IRUGO, show_TermChar, store_TermChar); | 
|  |  | 
|  | #define data_attribute(name)						\ | 
|  | static ssize_t show_##name(struct device *dev,				\ | 
|  | struct device_attribute *attr, char *buf)	\ | 
|  | {									\ | 
|  | struct usb_interface *intf = to_usb_interface(dev);		\ | 
|  | struct usbtmc_device_data *data = usb_get_intfdata(intf);	\ | 
|  | \ | 
|  | return sprintf(buf, "%d\n", data->name);			\ | 
|  | }									\ | 
|  | static ssize_t store_##name(struct device *dev,				\ | 
|  | struct device_attribute *attr,		\ | 
|  | const char *buf, size_t count)		\ | 
|  | {									\ | 
|  | struct usb_interface *intf = to_usb_interface(dev);		\ | 
|  | struct usbtmc_device_data *data = usb_get_intfdata(intf);	\ | 
|  | ssize_t result;							\ | 
|  | unsigned val;							\ | 
|  | \ | 
|  | result = sscanf(buf, "%u\n", &val);				\ | 
|  | if (result != 1)						\ | 
|  | result = -EINVAL;					\ | 
|  | data->name = val;						\ | 
|  | if (result < 0)							\ | 
|  | return result;						\ | 
|  | else								\ | 
|  | return count;						\ | 
|  | }									\ | 
|  | static DEVICE_ATTR(name, S_IRUGO, show_##name, store_##name) | 
|  |  | 
|  | data_attribute(TermCharEnabled); | 
|  | data_attribute(auto_abort); | 
|  |  | 
|  | static struct attribute *data_attrs[] = { | 
|  | &dev_attr_TermChar.attr, | 
|  | &dev_attr_TermCharEnabled.attr, | 
|  | &dev_attr_auto_abort.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group data_attr_grp = { | 
|  | .attrs = data_attrs, | 
|  | }; | 
|  |  | 
|  | static int usbtmc_ioctl_indicator_pulse(struct usbtmc_device_data *data) | 
|  | { | 
|  | struct device *dev; | 
|  | u8 *buffer; | 
|  | int rv; | 
|  |  | 
|  | dev = &data->intf->dev; | 
|  |  | 
|  | buffer = kmalloc(2, GFP_KERNEL); | 
|  | if (!buffer) | 
|  | return -ENOMEM; | 
|  |  | 
|  | rv = usb_control_msg(data->usb_dev, | 
|  | usb_rcvctrlpipe(data->usb_dev, 0), | 
|  | USBTMC_REQUEST_INDICATOR_PULSE, | 
|  | USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | 
|  | 0, 0, buffer, 0x01, USBTMC_TIMEOUT); | 
|  |  | 
|  | if (rv < 0) { | 
|  | dev_err(dev, "usb_control_msg returned %d\n", rv); | 
|  | goto exit; | 
|  | } | 
|  |  | 
|  | dev_dbg(dev, "INDICATOR_PULSE returned %x\n", buffer[0]); | 
|  |  | 
|  | if (buffer[0] != USBTMC_STATUS_SUCCESS) { | 
|  | dev_err(dev, "INDICATOR_PULSE returned %x\n", buffer[0]); | 
|  | rv = -EPERM; | 
|  | goto exit; | 
|  | } | 
|  | rv = 0; | 
|  |  | 
|  | exit: | 
|  | kfree(buffer); | 
|  | return rv; | 
|  | } | 
|  |  | 
|  | static long usbtmc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) | 
|  | { | 
|  | struct usbtmc_device_data *data; | 
|  | int retval = -EBADRQC; | 
|  |  | 
|  | data = file->private_data; | 
|  | mutex_lock(&data->io_mutex); | 
|  | if (data->zombie) { | 
|  | retval = -ENODEV; | 
|  | goto skip_io_on_zombie; | 
|  | } | 
|  |  | 
|  | switch (cmd) { | 
|  | case USBTMC_IOCTL_CLEAR_OUT_HALT: | 
|  | retval = usbtmc_ioctl_clear_out_halt(data); | 
|  | break; | 
|  |  | 
|  | case USBTMC_IOCTL_CLEAR_IN_HALT: | 
|  | retval = usbtmc_ioctl_clear_in_halt(data); | 
|  | break; | 
|  |  | 
|  | case USBTMC_IOCTL_INDICATOR_PULSE: | 
|  | retval = usbtmc_ioctl_indicator_pulse(data); | 
|  | break; | 
|  |  | 
|  | case USBTMC_IOCTL_CLEAR: | 
|  | retval = usbtmc_ioctl_clear(data); | 
|  | break; | 
|  |  | 
|  | case USBTMC_IOCTL_ABORT_BULK_OUT: | 
|  | retval = usbtmc_ioctl_abort_bulk_out(data); | 
|  | break; | 
|  |  | 
|  | case USBTMC_IOCTL_ABORT_BULK_IN: | 
|  | retval = usbtmc_ioctl_abort_bulk_in(data); | 
|  | break; | 
|  | } | 
|  |  | 
|  | skip_io_on_zombie: | 
|  | mutex_unlock(&data->io_mutex); | 
|  | return retval; | 
|  | } | 
|  |  | 
|  | static const struct file_operations fops = { | 
|  | .owner		= THIS_MODULE, | 
|  | .read		= usbtmc_read, | 
|  | .write		= usbtmc_write, | 
|  | .open		= usbtmc_open, | 
|  | .release	= usbtmc_release, | 
|  | .unlocked_ioctl	= usbtmc_ioctl, | 
|  | .llseek		= default_llseek, | 
|  | }; | 
|  |  | 
|  | static struct usb_class_driver usbtmc_class = { | 
|  | .name =		"usbtmc%d", | 
|  | .fops =		&fops, | 
|  | .minor_base =	USBTMC_MINOR_BASE, | 
|  | }; | 
|  |  | 
|  |  | 
|  | static int usbtmc_probe(struct usb_interface *intf, | 
|  | const struct usb_device_id *id) | 
|  | { | 
|  | struct usbtmc_device_data *data; | 
|  | struct usb_host_interface *iface_desc; | 
|  | struct usb_endpoint_descriptor *endpoint; | 
|  | int n; | 
|  | int retcode; | 
|  |  | 
|  | dev_dbg(&intf->dev, "%s called\n", __func__); | 
|  |  | 
|  | data = kmalloc(sizeof(struct usbtmc_device_data), GFP_KERNEL); | 
|  | if (!data) { | 
|  | dev_err(&intf->dev, "Unable to allocate kernel memory\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | data->intf = intf; | 
|  | data->id = id; | 
|  | data->usb_dev = usb_get_dev(interface_to_usbdev(intf)); | 
|  | usb_set_intfdata(intf, data); | 
|  | kref_init(&data->kref); | 
|  | mutex_init(&data->io_mutex); | 
|  | data->zombie = 0; | 
|  |  | 
|  | /* Determine if it is a Rigol or not */ | 
|  | data->rigol_quirk = 0; | 
|  | dev_dbg(&intf->dev, "Trying to find if device Vendor 0x%04X Product 0x%04X has the RIGOL quirk\n", | 
|  | le16_to_cpu(data->usb_dev->descriptor.idVendor), | 
|  | le16_to_cpu(data->usb_dev->descriptor.idProduct)); | 
|  | for(n = 0; usbtmc_id_quirk[n].idVendor > 0; n++) { | 
|  | if ((usbtmc_id_quirk[n].idVendor == le16_to_cpu(data->usb_dev->descriptor.idVendor)) && | 
|  | (usbtmc_id_quirk[n].idProduct == le16_to_cpu(data->usb_dev->descriptor.idProduct))) { | 
|  | dev_dbg(&intf->dev, "Setting this device as having the RIGOL quirk\n"); | 
|  | data->rigol_quirk = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Initialize USBTMC bTag and other fields */ | 
|  | data->bTag	= 1; | 
|  | data->TermCharEnabled = 0; | 
|  | data->TermChar = '\n'; | 
|  |  | 
|  | /* USBTMC devices have only one setting, so use that */ | 
|  | iface_desc = data->intf->cur_altsetting; | 
|  |  | 
|  | /* Find bulk in endpoint */ | 
|  | for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) { | 
|  | endpoint = &iface_desc->endpoint[n].desc; | 
|  |  | 
|  | if (usb_endpoint_is_bulk_in(endpoint)) { | 
|  | data->bulk_in = endpoint->bEndpointAddress; | 
|  | dev_dbg(&intf->dev, "Found bulk in endpoint at %u\n", | 
|  | data->bulk_in); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Find bulk out endpoint */ | 
|  | for (n = 0; n < iface_desc->desc.bNumEndpoints; n++) { | 
|  | endpoint = &iface_desc->endpoint[n].desc; | 
|  |  | 
|  | if (usb_endpoint_is_bulk_out(endpoint)) { | 
|  | data->bulk_out = endpoint->bEndpointAddress; | 
|  | dev_dbg(&intf->dev, "Found Bulk out endpoint at %u\n", | 
|  | data->bulk_out); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | retcode = get_capabilities(data); | 
|  | if (retcode) | 
|  | dev_err(&intf->dev, "can't read capabilities\n"); | 
|  | else | 
|  | retcode = sysfs_create_group(&intf->dev.kobj, | 
|  | &capability_attr_grp); | 
|  |  | 
|  | retcode = sysfs_create_group(&intf->dev.kobj, &data_attr_grp); | 
|  |  | 
|  | retcode = usb_register_dev(intf, &usbtmc_class); | 
|  | if (retcode) { | 
|  | dev_err(&intf->dev, "Not able to get a minor" | 
|  | " (base %u, slice default): %d\n", USBTMC_MINOR_BASE, | 
|  | retcode); | 
|  | goto error_register; | 
|  | } | 
|  | dev_dbg(&intf->dev, "Using minor number %d\n", intf->minor); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | error_register: | 
|  | sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp); | 
|  | sysfs_remove_group(&intf->dev.kobj, &data_attr_grp); | 
|  | kref_put(&data->kref, usbtmc_delete); | 
|  | return retcode; | 
|  | } | 
|  |  | 
|  | static void usbtmc_disconnect(struct usb_interface *intf) | 
|  | { | 
|  | struct usbtmc_device_data *data; | 
|  |  | 
|  | dev_dbg(&intf->dev, "usbtmc_disconnect called\n"); | 
|  |  | 
|  | data = usb_get_intfdata(intf); | 
|  | usb_deregister_dev(intf, &usbtmc_class); | 
|  | sysfs_remove_group(&intf->dev.kobj, &capability_attr_grp); | 
|  | sysfs_remove_group(&intf->dev.kobj, &data_attr_grp); | 
|  | mutex_lock(&data->io_mutex); | 
|  | data->zombie = 1; | 
|  | mutex_unlock(&data->io_mutex); | 
|  | kref_put(&data->kref, usbtmc_delete); | 
|  | } | 
|  |  | 
|  | static int usbtmc_suspend(struct usb_interface *intf, pm_message_t message) | 
|  | { | 
|  | /* this driver does not have pending URBs */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int usbtmc_resume(struct usb_interface *intf) | 
|  | { | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static struct usb_driver usbtmc_driver = { | 
|  | .name		= "usbtmc", | 
|  | .id_table	= usbtmc_devices, | 
|  | .probe		= usbtmc_probe, | 
|  | .disconnect	= usbtmc_disconnect, | 
|  | .suspend	= usbtmc_suspend, | 
|  | .resume		= usbtmc_resume, | 
|  | }; | 
|  |  | 
|  | module_usb_driver(usbtmc_driver); | 
|  |  | 
|  | MODULE_LICENSE("GPL"); |