drivers/usb/dwc3/dwc3-omap.c - third_party/linux - Git at Google

 /**
  * dwc3-omap.c - OMAP Specific Glue layer
  *
  * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
  *
  * Authors: Felipe Balbi <balbi@ti.com>,
  *	    Sebastian Andrzej Siewior <bigeasy@linutronix.de>
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  * 1. Redistributions of source code must retain the above copyright
  *    notice, this list of conditions, and the following disclaimer,
  *    without modification.
  * 2. Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in the
  *    documentation and/or other materials provided with the distribution.
  * 3. The names of the above-listed copyright holders may not be used
  *    to endorse or promote products derived from this software without
  *    specific prior written permission.
  *
  * ALTERNATIVELY, this software may be distributed under the terms of the
  * GNU General Public License ("GPL") version 2, as published by the Free
  * Software Foundation.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
  * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
  * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */

 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/dwc3-omap.h>
 #include <linux/usb/dwc3-omap.h>
 #include <linux/pm_runtime.h>
 #include <linux/dma-mapping.h>
 #include <linux/ioport.h>
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>

 #include <linux/usb/otg.h>
 #include <linux/usb/nop-usb-xceiv.h>

 /*
  * All these registers belong to OMAP's Wrapper around the
  * DesignWare USB3 Core.
  */

 #define USBOTGSS_REVISION			0x0000
 #define USBOTGSS_SYSCONFIG			0x0010
 #define USBOTGSS_IRQ_EOI			0x0020
 #define USBOTGSS_IRQSTATUS_RAW_0		0x0024
 #define USBOTGSS_IRQSTATUS_0			0x0028
 #define USBOTGSS_IRQENABLE_SET_0		0x002c
 #define USBOTGSS_IRQENABLE_CLR_0		0x0030
 #define USBOTGSS_IRQSTATUS_RAW_1		0x0034
 #define USBOTGSS_IRQSTATUS_1			0x0038
 #define USBOTGSS_IRQENABLE_SET_1		0x003c
 #define USBOTGSS_IRQENABLE_CLR_1		0x0040
 #define USBOTGSS_UTMI_OTG_CTRL			0x0080
 #define USBOTGSS_UTMI_OTG_STATUS		0x0084
 #define USBOTGSS_MMRAM_OFFSET			0x0100
 #define USBOTGSS_FLADJ				0x0104
 #define USBOTGSS_DEBUG_CFG			0x0108
 #define USBOTGSS_DEBUG_DATA			0x010c

 /* SYSCONFIG REGISTER */
 #define USBOTGSS_SYSCONFIG_DMADISABLE		(1 << 16)

 /* IRQ_EOI REGISTER */
 #define USBOTGSS_IRQ_EOI_LINE_NUMBER		(1 << 0)

 /* IRQS0 BITS */
 #define USBOTGSS_IRQO_COREIRQ_ST		(1 << 0)

 /* IRQ1 BITS */
 #define USBOTGSS_IRQ1_DMADISABLECLR		(1 << 17)
 #define USBOTGSS_IRQ1_OEVT			(1 << 16)
 #define USBOTGSS_IRQ1_DRVVBUS_RISE		(1 << 13)
 #define USBOTGSS_IRQ1_CHRGVBUS_RISE		(1 << 12)
 #define USBOTGSS_IRQ1_DISCHRGVBUS_RISE		(1 << 11)
 #define USBOTGSS_IRQ1_IDPULLUP_RISE		(1 << 8)
 #define USBOTGSS_IRQ1_DRVVBUS_FALL		(1 << 5)
 #define USBOTGSS_IRQ1_CHRGVBUS_FALL		(1 << 4)
 #define USBOTGSS_IRQ1_DISCHRGVBUS_FALL		(1 << 3)
 #define USBOTGSS_IRQ1_IDPULLUP_FALL		(1 << 0)

 /* UTMI_OTG_CTRL REGISTER */
 #define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS		(1 << 5)
 #define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS		(1 << 4)
 #define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS	(1 << 3)
 #define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP		(1 << 0)

 /* UTMI_OTG_STATUS REGISTER */
 #define USBOTGSS_UTMI_OTG_STATUS_SW_MODE	(1 << 31)
 #define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT	(1 << 9)
 #define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8)
 #define USBOTGSS_UTMI_OTG_STATUS_IDDIG		(1 << 4)
 #define USBOTGSS_UTMI_OTG_STATUS_SESSEND	(1 << 3)
 #define USBOTGSS_UTMI_OTG_STATUS_SESSVALID	(1 << 2)
 #define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID	(1 << 1)

 struct dwc3_omap {
 	/* device lock */
 	spinlock_t		lock;

 	struct platform_device	*usb2_phy;
 	struct platform_device	*usb3_phy;
 	struct device		*dev;

 	int			irq;
 	void __iomem		*base;

 	void			*context;
 	u32			resource_size;

 	u32			dma_status:1;
 };

 struct dwc3_omap		*_omap;

 static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
 {
 	return readl(base + offset);
 }

 static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
 {
 	writel(value, base + offset);
 }

 void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
 {
 	u32			val;
 	struct dwc3_omap	*omap = _omap;

 	switch (status) {
 	case OMAP_DWC3_ID_GROUND:
 		dev_dbg(omap->dev, "ID GND\n");

 		val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 		val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG
 				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
 				| USBOTGSS_UTMI_OTG_STATUS_SESSEND);
 		val |= USBOTGSS_UTMI_OTG_STATUS_SESSVALID
 				| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
 		dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
 		break;

 	case OMAP_DWC3_VBUS_VALID:
 		dev_dbg(omap->dev, "VBUS Connect\n");

 		val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 		val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND;
 		val |= USBOTGSS_UTMI_OTG_STATUS_IDDIG
 				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
 				| USBOTGSS_UTMI_OTG_STATUS_SESSVALID
 				| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
 		dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
 		break;

 	case OMAP_DWC3_ID_FLOAT:
 	case OMAP_DWC3_VBUS_OFF:
 		dev_dbg(omap->dev, "VBUS Disconnect\n");

 		val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
 		val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID
 				| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
 				| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT);
 		val |= USBOTGSS_UTMI_OTG_STATUS_SESSEND
 				| USBOTGSS_UTMI_OTG_STATUS_IDDIG;
 		dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
 		break;

 	default:
 		dev_dbg(omap->dev, "ID float\n");
 	}

 	return;
 }
 EXPORT_SYMBOL_GPL(dwc3_omap_mailbox);

 static int dwc3_omap_register_phys(struct dwc3_omap *omap)
 {
 	struct nop_usb_xceiv_platform_data pdata;
 	struct platform_device	*pdev;
 	int			ret;

 	memset(&pdata, 0x00, sizeof(pdata));

 	pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO);
 	if (!pdev)
 		return -ENOMEM;

 	omap->usb2_phy = pdev;
 	pdata.type = USB_PHY_TYPE_USB2;

 	ret = platform_device_add_data(omap->usb2_phy, &pdata, sizeof(pdata));
 	if (ret)
 		goto err1;

 	pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO);
 	if (!pdev) {
 		ret = -ENOMEM;
 		goto err1;
 	}

 	omap->usb3_phy = pdev;
 	pdata.type = USB_PHY_TYPE_USB3;

 	ret = platform_device_add_data(omap->usb3_phy, &pdata, sizeof(pdata));
 	if (ret)
 		goto err2;

 	ret = platform_device_add(omap->usb2_phy);
 	if (ret)
 		goto err2;

 	ret = platform_device_add(omap->usb3_phy);
 	if (ret)
 		goto err3;

 	return 0;

 err3:
 	platform_device_del(omap->usb2_phy);

 err2:
 	platform_device_put(omap->usb3_phy);

 err1:
 	platform_device_put(omap->usb2_phy);

 	return ret;
 }

 static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
 {
 	struct dwc3_omap	*omap = _omap;
 	u32			reg;

 	spin_lock(&omap->lock);

 	reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_1);

 	if (reg & USBOTGSS_IRQ1_DMADISABLECLR) {
 		dev_dbg(omap->dev, "DMA Disable was Cleared\n");
 		omap->dma_status = false;
 	}

 	if (reg & USBOTGSS_IRQ1_OEVT)
 		dev_dbg(omap->dev, "OTG Event\n");

 	if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE)
 		dev_dbg(omap->dev, "DRVVBUS Rise\n");

 	if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE)
 		dev_dbg(omap->dev, "CHRGVBUS Rise\n");

 	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE)
 		dev_dbg(omap->dev, "DISCHRGVBUS Rise\n");

 	if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE)
 		dev_dbg(omap->dev, "IDPULLUP Rise\n");

 	if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL)
 		dev_dbg(omap->dev, "DRVVBUS Fall\n");

 	if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL)
 		dev_dbg(omap->dev, "CHRGVBUS Fall\n");

 	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL)
 		dev_dbg(omap->dev, "DISCHRGVBUS Fall\n");

 	if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL)
 		dev_dbg(omap->dev, "IDPULLUP Fall\n");

 	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg);

 	reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0);
 	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg);

 	spin_unlock(&omap->lock);

 	return IRQ_HANDLED;
 }

 static int dwc3_omap_remove_core(struct device *dev, void *c)
 {
 	struct platform_device *pdev = to_platform_device(dev);

 	platform_device_unregister(pdev);

 	return 0;
 }

 static int dwc3_omap_probe(struct platform_device *pdev)
 {
 	struct dwc3_omap_data	*pdata = pdev->dev.platform_data;
 	struct device_node	*node = pdev->dev.of_node;

 	struct dwc3_omap	*omap;
 	struct resource		*res;
 	struct device		*dev = &pdev->dev;

 	int			size;
 	int			ret = -ENOMEM;
 	int			irq;

 	const u32		*utmi_mode;
 	u32			reg;

 	void __iomem		*base;
 	void			*context;

 	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
 	if (!omap) {
 		dev_err(dev, "not enough memory\n");
 		return -ENOMEM;
 	}

 	platform_set_drvdata(pdev, omap);

 	irq = platform_get_irq(pdev, 1);
 	if (irq < 0) {
 		dev_err(dev, "missing IRQ resource\n");
 		return -EINVAL;
 	}

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 	if (!res) {
 		dev_err(dev, "missing memory base resource\n");
 		return -EINVAL;
 	}

 	base = devm_ioremap_nocache(dev, res->start, resource_size(res));
 	if (!base) {
 		dev_err(dev, "ioremap failed\n");
 		return -ENOMEM;
 	}

 	ret = dwc3_omap_register_phys(omap);
 	if (ret) {
 		dev_err(dev, "couldn't register PHYs\n");
 		return ret;
 	}

 	context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL);
 	if (!context) {
 		dev_err(dev, "couldn't allocate dwc3 context memory\n");
 		return -ENOMEM;
 	}

 	spin_lock_init(&omap->lock);

 	omap->resource_size = resource_size(res);
 	omap->context	= context;
 	omap->dev	= dev;
 	omap->irq	= irq;
 	omap->base	= base;

 	/*
 	 * REVISIT if we ever have two instances of the wrapper, we will be
 	 * in big trouble
 	 */
 	_omap	= omap;

 	pm_runtime_enable(dev);
 	ret = pm_runtime_get_sync(dev);
 	if (ret < 0) {
 		dev_err(dev, "get_sync failed with err %d\n", ret);
 		return ret;
 	}

 	reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);

 	utmi_mode = of_get_property(node, "utmi-mode", &size);
 	if (utmi_mode && size == sizeof(*utmi_mode)) {
 		reg |= *utmi_mode;
 	} else {
 		if (!pdata) {
 			dev_dbg(dev, "missing platform data\n");
 		} else {
 			switch (pdata->utmi_mode) {
 			case DWC3_OMAP_UTMI_MODE_SW:
 				reg |= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
 				break;
 			case DWC3_OMAP_UTMI_MODE_HW:
 				reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
 				break;
 			default:
 				dev_dbg(dev, "UNKNOWN utmi mode %d\n",
 						pdata->utmi_mode);
 			}
 		}
 	}

 	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);

 	/* check the DMA Status */
 	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
 	omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);

 	ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
 			"dwc3-omap", omap);
 	if (ret) {
 		dev_err(dev, "failed to request IRQ #%d --> %d\n",
 				omap->irq, ret);
 		return ret;
 	}

 	/* enable all IRQs */
 	reg = USBOTGSS_IRQO_COREIRQ_ST;
 	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);

 	reg = (USBOTGSS_IRQ1_OEVT |
 			USBOTGSS_IRQ1_DRVVBUS_RISE |
 			USBOTGSS_IRQ1_CHRGVBUS_RISE |
 			USBOTGSS_IRQ1_DISCHRGVBUS_RISE |
 			USBOTGSS_IRQ1_IDPULLUP_RISE |
 			USBOTGSS_IRQ1_DRVVBUS_FALL |
 			USBOTGSS_IRQ1_CHRGVBUS_FALL |
 			USBOTGSS_IRQ1_DISCHRGVBUS_FALL |
 			USBOTGSS_IRQ1_IDPULLUP_FALL);

 	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);

 	if (node) {
 		ret = of_platform_populate(node, NULL, NULL, dev);
 		if (ret) {
 			dev_err(&pdev->dev,
 				"failed to add create dwc3 core\n");
 			return ret;
 		}
 	}

 	return 0;
 }

 static int dwc3_omap_remove(struct platform_device *pdev)
 {
 	struct dwc3_omap	*omap = platform_get_drvdata(pdev);

 	platform_device_unregister(omap->usb2_phy);
 	platform_device_unregister(omap->usb3_phy);
 	pm_runtime_put_sync(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);

 	return 0;
 }

 static const struct of_device_id of_dwc3_match[] = {
 	{
 		"ti,dwc3",
 	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, of_dwc3_match);

 static struct platform_driver dwc3_omap_driver = {
 	.probe		= dwc3_omap_probe,
 	.remove		= dwc3_omap_remove,
 	.driver		= {
 		.name	= "omap-dwc3",
 		.of_match_table	= of_dwc3_match,
 	},
 };

 module_platform_driver(dwc3_omap_driver);

 MODULE_ALIAS("platform:omap-dwc3");
 MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");
	/**
	* dwc3-omap.c - OMAP Specific Glue layer
	*
	* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
	*
	* Authors: Felipe Balbi <balbi@ti.com>,
	* Sebastian Andrzej Siewior <bigeasy@linutronix.de>
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	* 1. Redistributions of source code must retain the above copyright
	* notice, this list of conditions, and the following disclaimer,
	* without modification.
	* 2. Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in the
	* documentation and/or other materials provided with the distribution.
	* 3. The names of the above-listed copyright holders may not be used
	* to endorse or promote products derived from this software without
	* specific prior written permission.
	*
	* ALTERNATIVELY, this software may be distributed under the terms of the
	* GNU General Public License ("GPL") version 2, as published by the Free
	* Software Foundation.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
	* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
	* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
	* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
	* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
	* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
	* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
	* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
	* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
	* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
	* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*/

	#include <linux/module.h>
	#include <linux/kernel.h>
	#include <linux/slab.h>
	#include <linux/interrupt.h>
	#include <linux/spinlock.h>
	#include <linux/platform_device.h>
	#include <linux/platform_data/dwc3-omap.h>
	#include <linux/usb/dwc3-omap.h>
	#include <linux/pm_runtime.h>
	#include <linux/dma-mapping.h>
	#include <linux/ioport.h>
	#include <linux/io.h>
	#include <linux/of.h>
	#include <linux/of_platform.h>

	#include <linux/usb/otg.h>
	#include <linux/usb/nop-usb-xceiv.h>

	/*
	* All these registers belong to OMAP's Wrapper around the
	* DesignWare USB3 Core.
	*/

	#define USBOTGSS_REVISION 0x0000
	#define USBOTGSS_SYSCONFIG 0x0010
	#define USBOTGSS_IRQ_EOI 0x0020
	#define USBOTGSS_IRQSTATUS_RAW_0 0x0024
	#define USBOTGSS_IRQSTATUS_0 0x0028
	#define USBOTGSS_IRQENABLE_SET_0 0x002c
	#define USBOTGSS_IRQENABLE_CLR_0 0x0030
	#define USBOTGSS_IRQSTATUS_RAW_1 0x0034
	#define USBOTGSS_IRQSTATUS_1 0x0038
	#define USBOTGSS_IRQENABLE_SET_1 0x003c
	#define USBOTGSS_IRQENABLE_CLR_1 0x0040
	#define USBOTGSS_UTMI_OTG_CTRL 0x0080
	#define USBOTGSS_UTMI_OTG_STATUS 0x0084
	#define USBOTGSS_MMRAM_OFFSET 0x0100
	#define USBOTGSS_FLADJ 0x0104
	#define USBOTGSS_DEBUG_CFG 0x0108
	#define USBOTGSS_DEBUG_DATA 0x010c

	/* SYSCONFIG REGISTER */
	#define USBOTGSS_SYSCONFIG_DMADISABLE (1 << 16)

	/* IRQ_EOI REGISTER */
	#define USBOTGSS_IRQ_EOI_LINE_NUMBER (1 << 0)

	/* IRQS0 BITS */
	#define USBOTGSS_IRQO_COREIRQ_ST (1 << 0)

	/* IRQ1 BITS */
	#define USBOTGSS_IRQ1_DMADISABLECLR (1 << 17)
	#define USBOTGSS_IRQ1_OEVT (1 << 16)
	#define USBOTGSS_IRQ1_DRVVBUS_RISE (1 << 13)
	#define USBOTGSS_IRQ1_CHRGVBUS_RISE (1 << 12)
	#define USBOTGSS_IRQ1_DISCHRGVBUS_RISE (1 << 11)
	#define USBOTGSS_IRQ1_IDPULLUP_RISE (1 << 8)
	#define USBOTGSS_IRQ1_DRVVBUS_FALL (1 << 5)
	#define USBOTGSS_IRQ1_CHRGVBUS_FALL (1 << 4)
	#define USBOTGSS_IRQ1_DISCHRGVBUS_FALL (1 << 3)
	#define USBOTGSS_IRQ1_IDPULLUP_FALL (1 << 0)

	/* UTMI_OTG_CTRL REGISTER */
	#define USBOTGSS_UTMI_OTG_CTRL_DRVVBUS (1 << 5)
	#define USBOTGSS_UTMI_OTG_CTRL_CHRGVBUS (1 << 4)
	#define USBOTGSS_UTMI_OTG_CTRL_DISCHRGVBUS (1 << 3)
	#define USBOTGSS_UTMI_OTG_CTRL_IDPULLUP (1 << 0)

	/* UTMI_OTG_STATUS REGISTER */
	#define USBOTGSS_UTMI_OTG_STATUS_SW_MODE (1 << 31)
	#define USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT (1 << 9)
	#define USBOTGSS_UTMI_OTG_STATUS_TXBITSTUFFENABLE (1 << 8)
	#define USBOTGSS_UTMI_OTG_STATUS_IDDIG (1 << 4)
	#define USBOTGSS_UTMI_OTG_STATUS_SESSEND (1 << 3)
	#define USBOTGSS_UTMI_OTG_STATUS_SESSVALID (1 << 2)
	#define USBOTGSS_UTMI_OTG_STATUS_VBUSVALID (1 << 1)

	struct dwc3_omap {
	/* device lock */
	spinlock_t lock;

	struct platform_device *usb2_phy;
	struct platform_device *usb3_phy;
	struct device *dev;

	int irq;
	void __iomem *base;

	void *context;
	u32 resource_size;

	u32 dma_status:1;
	};

	struct dwc3_omap *_omap;

	static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset)
	{
	return readl(base + offset);
	}

	static inline void dwc3_omap_writel(void __iomem *base, u32 offset, u32 value)
	{
	writel(value, base + offset);
	}

	void dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status)
	{
	u32 val;
	struct dwc3_omap *omap = _omap;

	switch (status) {
	case OMAP_DWC3_ID_GROUND:
	dev_dbg(omap->dev, "ID GND\n");

	val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
	val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG
	\| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
	\| USBOTGSS_UTMI_OTG_STATUS_SESSEND);
	val \|= USBOTGSS_UTMI_OTG_STATUS_SESSVALID
	\| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
	break;

	case OMAP_DWC3_VBUS_VALID:
	dev_dbg(omap->dev, "VBUS Connect\n");

	val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
	val &= ~USBOTGSS_UTMI_OTG_STATUS_SESSEND;
	val \|= USBOTGSS_UTMI_OTG_STATUS_IDDIG
	\| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
	\| USBOTGSS_UTMI_OTG_STATUS_SESSVALID
	\| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT;
	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
	break;

	case OMAP_DWC3_ID_FLOAT:
	case OMAP_DWC3_VBUS_OFF:
	dev_dbg(omap->dev, "VBUS Disconnect\n");

	val = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
	val &= ~(USBOTGSS_UTMI_OTG_STATUS_SESSVALID
	\| USBOTGSS_UTMI_OTG_STATUS_VBUSVALID
	\| USBOTGSS_UTMI_OTG_STATUS_POWERPRESENT);
	val \|= USBOTGSS_UTMI_OTG_STATUS_SESSEND
	\| USBOTGSS_UTMI_OTG_STATUS_IDDIG;
	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, val);
	break;

	default:
	dev_dbg(omap->dev, "ID float\n");
	}

	return;
	}
	EXPORT_SYMBOL_GPL(dwc3_omap_mailbox);

	static int dwc3_omap_register_phys(struct dwc3_omap *omap)
	{
	struct nop_usb_xceiv_platform_data pdata;
	struct platform_device *pdev;
	int ret;

	memset(&pdata, 0x00, sizeof(pdata));

	pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO);
	if (!pdev)
	return -ENOMEM;

	omap->usb2_phy = pdev;
	pdata.type = USB_PHY_TYPE_USB2;

	ret = platform_device_add_data(omap->usb2_phy, &pdata, sizeof(pdata));
	if (ret)
	goto err1;

	pdev = platform_device_alloc("nop_usb_xceiv", PLATFORM_DEVID_AUTO);
	if (!pdev) {
	ret = -ENOMEM;
	goto err1;
	}

	omap->usb3_phy = pdev;
	pdata.type = USB_PHY_TYPE_USB3;

	ret = platform_device_add_data(omap->usb3_phy, &pdata, sizeof(pdata));
	if (ret)
	goto err2;

	ret = platform_device_add(omap->usb2_phy);
	if (ret)
	goto err2;

	ret = platform_device_add(omap->usb3_phy);
	if (ret)
	goto err3;

	return 0;

	err3:
	platform_device_del(omap->usb2_phy);

	err2:
	platform_device_put(omap->usb3_phy);

	err1:
	platform_device_put(omap->usb2_phy);

	return ret;
	}

	static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap)
	{
	struct dwc3_omap *omap = _omap;
	u32 reg;

	spin_lock(&omap->lock);

	reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_1);

	if (reg & USBOTGSS_IRQ1_DMADISABLECLR) {
	dev_dbg(omap->dev, "DMA Disable was Cleared\n");
	omap->dma_status = false;
	}

	if (reg & USBOTGSS_IRQ1_OEVT)
	dev_dbg(omap->dev, "OTG Event\n");

	if (reg & USBOTGSS_IRQ1_DRVVBUS_RISE)
	dev_dbg(omap->dev, "DRVVBUS Rise\n");

	if (reg & USBOTGSS_IRQ1_CHRGVBUS_RISE)
	dev_dbg(omap->dev, "CHRGVBUS Rise\n");

	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_RISE)
	dev_dbg(omap->dev, "DISCHRGVBUS Rise\n");

	if (reg & USBOTGSS_IRQ1_IDPULLUP_RISE)
	dev_dbg(omap->dev, "IDPULLUP Rise\n");

	if (reg & USBOTGSS_IRQ1_DRVVBUS_FALL)
	dev_dbg(omap->dev, "DRVVBUS Fall\n");

	if (reg & USBOTGSS_IRQ1_CHRGVBUS_FALL)
	dev_dbg(omap->dev, "CHRGVBUS Fall\n");

	if (reg & USBOTGSS_IRQ1_DISCHRGVBUS_FALL)
	dev_dbg(omap->dev, "DISCHRGVBUS Fall\n");

	if (reg & USBOTGSS_IRQ1_IDPULLUP_FALL)
	dev_dbg(omap->dev, "IDPULLUP Fall\n");

	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_1, reg);

	reg = dwc3_omap_readl(omap->base, USBOTGSS_IRQSTATUS_0);
	dwc3_omap_writel(omap->base, USBOTGSS_IRQSTATUS_0, reg);

	spin_unlock(&omap->lock);

	return IRQ_HANDLED;
	}

	static int dwc3_omap_remove_core(struct device dev, void c)
	{
	struct platform_device *pdev = to_platform_device(dev);

	platform_device_unregister(pdev);

	return 0;
	}

	static int dwc3_omap_probe(struct platform_device *pdev)
	{
	struct dwc3_omap_data *pdata = pdev->dev.platform_data;
	struct device_node *node = pdev->dev.of_node;

	struct dwc3_omap *omap;
	struct resource *res;
	struct device *dev = &pdev->dev;

	int size;
	int ret = -ENOMEM;
	int irq;

	const u32 *utmi_mode;
	u32 reg;

	void __iomem *base;
	void *context;

	omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
	if (!omap) {
	dev_err(dev, "not enough memory\n");
	return -ENOMEM;
	}

	platform_set_drvdata(pdev, omap);

	irq = platform_get_irq(pdev, 1);
	if (irq < 0) {
	dev_err(dev, "missing IRQ resource\n");
	return -EINVAL;
	}

	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
	if (!res) {
	dev_err(dev, "missing memory base resource\n");
	return -EINVAL;
	}

	base = devm_ioremap_nocache(dev, res->start, resource_size(res));
	if (!base) {
	dev_err(dev, "ioremap failed\n");
	return -ENOMEM;
	}

	ret = dwc3_omap_register_phys(omap);
	if (ret) {
	dev_err(dev, "couldn't register PHYs\n");
	return ret;
	}

	context = devm_kzalloc(dev, resource_size(res), GFP_KERNEL);
	if (!context) {
	dev_err(dev, "couldn't allocate dwc3 context memory\n");
	return -ENOMEM;
	}

	spin_lock_init(&omap->lock);

	omap->resource_size = resource_size(res);
	omap->context = context;
	omap->dev = dev;
	omap->irq = irq;
	omap->base = base;

	/*
	* REVISIT if we ever have two instances of the wrapper, we will be
	* in big trouble
	*/
	_omap = omap;

	pm_runtime_enable(dev);
	ret = pm_runtime_get_sync(dev);
	if (ret < 0) {
	dev_err(dev, "get_sync failed with err %d\n", ret);
	return ret;
	}

	reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);

	utmi_mode = of_get_property(node, "utmi-mode", &size);
	if (utmi_mode && size == sizeof(*utmi_mode)) {
	reg \|= *utmi_mode;
	} else {
	if (!pdata) {
	dev_dbg(dev, "missing platform data\n");
	} else {
	switch (pdata->utmi_mode) {
	case DWC3_OMAP_UTMI_MODE_SW:
	reg \|= USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
	break;
	case DWC3_OMAP_UTMI_MODE_HW:
	reg &= ~USBOTGSS_UTMI_OTG_STATUS_SW_MODE;
	break;
	default:
	dev_dbg(dev, "UNKNOWN utmi mode %d\n",
	pdata->utmi_mode);
	}
	}
	}

	dwc3_omap_writel(omap->base, USBOTGSS_UTMI_OTG_STATUS, reg);

	/* check the DMA Status */
	reg = dwc3_omap_readl(omap->base, USBOTGSS_SYSCONFIG);
	omap->dma_status = !!(reg & USBOTGSS_SYSCONFIG_DMADISABLE);

	ret = devm_request_irq(dev, omap->irq, dwc3_omap_interrupt, 0,
	"dwc3-omap", omap);
	if (ret) {
	dev_err(dev, "failed to request IRQ #%d --> %d\n",
	omap->irq, ret);
	return ret;
	}

	/* enable all IRQs */
	reg = USBOTGSS_IRQO_COREIRQ_ST;
	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_0, reg);

	reg = (USBOTGSS_IRQ1_OEVT \|
	USBOTGSS_IRQ1_DRVVBUS_RISE \|
	USBOTGSS_IRQ1_CHRGVBUS_RISE \|
	USBOTGSS_IRQ1_DISCHRGVBUS_RISE \|
	USBOTGSS_IRQ1_IDPULLUP_RISE \|
	USBOTGSS_IRQ1_DRVVBUS_FALL \|
	USBOTGSS_IRQ1_CHRGVBUS_FALL \|
	USBOTGSS_IRQ1_DISCHRGVBUS_FALL \|
	USBOTGSS_IRQ1_IDPULLUP_FALL);

	dwc3_omap_writel(omap->base, USBOTGSS_IRQENABLE_SET_1, reg);

	if (node) {
	ret = of_platform_populate(node, NULL, NULL, dev);
	if (ret) {
	dev_err(&pdev->dev,
	"failed to add create dwc3 core\n");
	return ret;
	}
	}

	return 0;
	}

	static int dwc3_omap_remove(struct platform_device *pdev)
	{
	struct dwc3_omap *omap = platform_get_drvdata(pdev);

	platform_device_unregister(omap->usb2_phy);
	platform_device_unregister(omap->usb3_phy);
	pm_runtime_put_sync(&pdev->dev);
	pm_runtime_disable(&pdev->dev);
	device_for_each_child(&pdev->dev, NULL, dwc3_omap_remove_core);

	return 0;
	}

	static const struct of_device_id of_dwc3_match[] = {
	{
	"ti,dwc3",
	},
	{ },
	};
	MODULE_DEVICE_TABLE(of, of_dwc3_match);

	static struct platform_driver dwc3_omap_driver = {
	.probe = dwc3_omap_probe,
	.remove = dwc3_omap_remove,
	.driver = {
	.name = "omap-dwc3",
	.of_match_table = of_dwc3_match,
	},
	};

	module_platform_driver(dwc3_omap_driver);

	MODULE_ALIAS("platform:omap-dwc3");
	MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
	MODULE_LICENSE("Dual BSD/GPL");
	MODULE_DESCRIPTION("DesignWare USB3 OMAP Glue Layer");