|  | /* | 
|  | * ipr.c -- driver for IBM Power Linux RAID adapters | 
|  | * | 
|  | * Written By: Brian King <brking@us.ibm.com>, IBM Corporation | 
|  | * | 
|  | * Copyright (C) 2003, 2004 IBM Corporation | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write to the Free Software | 
|  | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA | 
|  | * | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * Notes: | 
|  | * | 
|  | * This driver is used to control the following SCSI adapters: | 
|  | * | 
|  | * IBM iSeries: 5702, 5703, 2780, 5709, 570A, 570B | 
|  | * | 
|  | * IBM pSeries: PCI-X Dual Channel Ultra 320 SCSI RAID Adapter | 
|  | *              PCI-X Dual Channel Ultra 320 SCSI Adapter | 
|  | *              PCI-X Dual Channel Ultra 320 SCSI RAID Enablement Card | 
|  | *              Embedded SCSI adapter on p615 and p655 systems | 
|  | * | 
|  | * Supported Hardware Features: | 
|  | *	- Ultra 320 SCSI controller | 
|  | *	- PCI-X host interface | 
|  | *	- Embedded PowerPC RISC Processor and Hardware XOR DMA Engine | 
|  | *	- Non-Volatile Write Cache | 
|  | *	- Supports attachment of non-RAID disks, tape, and optical devices | 
|  | *	- RAID Levels 0, 5, 10 | 
|  | *	- Hot spare | 
|  | *	- Background Parity Checking | 
|  | *	- Background Data Scrubbing | 
|  | *	- Ability to increase the capacity of an existing RAID 5 disk array | 
|  | *		by adding disks | 
|  | * | 
|  | * Driver Features: | 
|  | *	- Tagged command queuing | 
|  | *	- Adapter microcode download | 
|  | *	- PCI hot plug | 
|  | *	- SCSI device hot plug | 
|  | * | 
|  | */ | 
|  |  | 
|  | #include <linux/fs.h> | 
|  | #include <linux/init.h> | 
|  | #include <linux/types.h> | 
|  | #include <linux/errno.h> | 
|  | #include <linux/kernel.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/ioport.h> | 
|  | #include <linux/delay.h> | 
|  | #include <linux/pci.h> | 
|  | #include <linux/wait.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/sched.h> | 
|  | #include <linux/interrupt.h> | 
|  | #include <linux/blkdev.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/moduleparam.h> | 
|  | #include <linux/libata.h> | 
|  | #include <linux/hdreg.h> | 
|  | #include <linux/reboot.h> | 
|  | #include <linux/stringify.h> | 
|  | #include <asm/io.h> | 
|  | #include <asm/irq.h> | 
|  | #include <asm/processor.h> | 
|  | #include <scsi/scsi.h> | 
|  | #include <scsi/scsi_host.h> | 
|  | #include <scsi/scsi_tcq.h> | 
|  | #include <scsi/scsi_eh.h> | 
|  | #include <scsi/scsi_cmnd.h> | 
|  | #include "ipr.h" | 
|  |  | 
|  | /* | 
|  | *   Global Data | 
|  | */ | 
|  | static LIST_HEAD(ipr_ioa_head); | 
|  | static unsigned int ipr_log_level = IPR_DEFAULT_LOG_LEVEL; | 
|  | static unsigned int ipr_max_speed = 1; | 
|  | static int ipr_testmode = 0; | 
|  | static unsigned int ipr_fastfail = 0; | 
|  | static unsigned int ipr_transop_timeout = 0; | 
|  | static unsigned int ipr_debug = 0; | 
|  | static unsigned int ipr_max_devs = IPR_DEFAULT_SIS64_DEVS; | 
|  | static unsigned int ipr_dual_ioa_raid = 1; | 
|  | static unsigned int ipr_number_of_msix = 2; | 
|  | static DEFINE_SPINLOCK(ipr_driver_lock); | 
|  |  | 
|  | /* This table describes the differences between DMA controller chips */ | 
|  | static const struct ipr_chip_cfg_t ipr_chip_cfg[] = { | 
|  | { /* Gemstone, Citrine, Obsidian, and Obsidian-E */ | 
|  | .mailbox = 0x0042C, | 
|  | .max_cmds = 100, | 
|  | .cache_line_size = 0x20, | 
|  | .clear_isr = 1, | 
|  | .iopoll_weight = 0, | 
|  | { | 
|  | .set_interrupt_mask_reg = 0x0022C, | 
|  | .clr_interrupt_mask_reg = 0x00230, | 
|  | .clr_interrupt_mask_reg32 = 0x00230, | 
|  | .sense_interrupt_mask_reg = 0x0022C, | 
|  | .sense_interrupt_mask_reg32 = 0x0022C, | 
|  | .clr_interrupt_reg = 0x00228, | 
|  | .clr_interrupt_reg32 = 0x00228, | 
|  | .sense_interrupt_reg = 0x00224, | 
|  | .sense_interrupt_reg32 = 0x00224, | 
|  | .ioarrin_reg = 0x00404, | 
|  | .sense_uproc_interrupt_reg = 0x00214, | 
|  | .sense_uproc_interrupt_reg32 = 0x00214, | 
|  | .set_uproc_interrupt_reg = 0x00214, | 
|  | .set_uproc_interrupt_reg32 = 0x00214, | 
|  | .clr_uproc_interrupt_reg = 0x00218, | 
|  | .clr_uproc_interrupt_reg32 = 0x00218 | 
|  | } | 
|  | }, | 
|  | { /* Snipe and Scamp */ | 
|  | .mailbox = 0x0052C, | 
|  | .max_cmds = 100, | 
|  | .cache_line_size = 0x20, | 
|  | .clear_isr = 1, | 
|  | .iopoll_weight = 0, | 
|  | { | 
|  | .set_interrupt_mask_reg = 0x00288, | 
|  | .clr_interrupt_mask_reg = 0x0028C, | 
|  | .clr_interrupt_mask_reg32 = 0x0028C, | 
|  | .sense_interrupt_mask_reg = 0x00288, | 
|  | .sense_interrupt_mask_reg32 = 0x00288, | 
|  | .clr_interrupt_reg = 0x00284, | 
|  | .clr_interrupt_reg32 = 0x00284, | 
|  | .sense_interrupt_reg = 0x00280, | 
|  | .sense_interrupt_reg32 = 0x00280, | 
|  | .ioarrin_reg = 0x00504, | 
|  | .sense_uproc_interrupt_reg = 0x00290, | 
|  | .sense_uproc_interrupt_reg32 = 0x00290, | 
|  | .set_uproc_interrupt_reg = 0x00290, | 
|  | .set_uproc_interrupt_reg32 = 0x00290, | 
|  | .clr_uproc_interrupt_reg = 0x00294, | 
|  | .clr_uproc_interrupt_reg32 = 0x00294 | 
|  | } | 
|  | }, | 
|  | { /* CRoC */ | 
|  | .mailbox = 0x00044, | 
|  | .max_cmds = 1000, | 
|  | .cache_line_size = 0x20, | 
|  | .clear_isr = 0, | 
|  | .iopoll_weight = 64, | 
|  | { | 
|  | .set_interrupt_mask_reg = 0x00010, | 
|  | .clr_interrupt_mask_reg = 0x00018, | 
|  | .clr_interrupt_mask_reg32 = 0x0001C, | 
|  | .sense_interrupt_mask_reg = 0x00010, | 
|  | .sense_interrupt_mask_reg32 = 0x00014, | 
|  | .clr_interrupt_reg = 0x00008, | 
|  | .clr_interrupt_reg32 = 0x0000C, | 
|  | .sense_interrupt_reg = 0x00000, | 
|  | .sense_interrupt_reg32 = 0x00004, | 
|  | .ioarrin_reg = 0x00070, | 
|  | .sense_uproc_interrupt_reg = 0x00020, | 
|  | .sense_uproc_interrupt_reg32 = 0x00024, | 
|  | .set_uproc_interrupt_reg = 0x00020, | 
|  | .set_uproc_interrupt_reg32 = 0x00024, | 
|  | .clr_uproc_interrupt_reg = 0x00028, | 
|  | .clr_uproc_interrupt_reg32 = 0x0002C, | 
|  | .init_feedback_reg = 0x0005C, | 
|  | .dump_addr_reg = 0x00064, | 
|  | .dump_data_reg = 0x00068, | 
|  | .endian_swap_reg = 0x00084 | 
|  | } | 
|  | }, | 
|  | }; | 
|  |  | 
|  | static const struct ipr_chip_t ipr_chip[] = { | 
|  | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] }, | 
|  | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, IPR_USE_MSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[0] }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[1] }, | 
|  | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, IPR_USE_LSI, IPR_SIS32, IPR_PCI_CFG, &ipr_chip_cfg[1] }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, IPR_USE_MSI, IPR_SIS64, IPR_MMIO, &ipr_chip_cfg[2] }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, IPR_USE_MSI, IPR_SIS64, IPR_MMIO, &ipr_chip_cfg[2] } | 
|  | }; | 
|  |  | 
|  | static int ipr_max_bus_speeds[] = { | 
|  | IPR_80MBs_SCSI_RATE, IPR_U160_SCSI_RATE, IPR_U320_SCSI_RATE | 
|  | }; | 
|  |  | 
|  | MODULE_AUTHOR("Brian King <brking@us.ibm.com>"); | 
|  | MODULE_DESCRIPTION("IBM Power RAID SCSI Adapter Driver"); | 
|  | module_param_named(max_speed, ipr_max_speed, uint, 0); | 
|  | MODULE_PARM_DESC(max_speed, "Maximum bus speed (0-2). Default: 1=U160. Speeds: 0=80 MB/s, 1=U160, 2=U320"); | 
|  | module_param_named(log_level, ipr_log_level, uint, 0); | 
|  | MODULE_PARM_DESC(log_level, "Set to 0 - 4 for increasing verbosity of device driver"); | 
|  | module_param_named(testmode, ipr_testmode, int, 0); | 
|  | MODULE_PARM_DESC(testmode, "DANGEROUS!!! Allows unsupported configurations"); | 
|  | module_param_named(fastfail, ipr_fastfail, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(fastfail, "Reduce timeouts and retries"); | 
|  | module_param_named(transop_timeout, ipr_transop_timeout, int, 0); | 
|  | MODULE_PARM_DESC(transop_timeout, "Time in seconds to wait for adapter to come operational (default: 300)"); | 
|  | module_param_named(debug, ipr_debug, int, S_IRUGO | S_IWUSR); | 
|  | MODULE_PARM_DESC(debug, "Enable device driver debugging logging. Set to 1 to enable. (default: 0)"); | 
|  | module_param_named(dual_ioa_raid, ipr_dual_ioa_raid, int, 0); | 
|  | MODULE_PARM_DESC(dual_ioa_raid, "Enable dual adapter RAID support. Set to 1 to enable. (default: 1)"); | 
|  | module_param_named(max_devs, ipr_max_devs, int, 0); | 
|  | MODULE_PARM_DESC(max_devs, "Specify the maximum number of physical devices. " | 
|  | "[Default=" __stringify(IPR_DEFAULT_SIS64_DEVS) "]"); | 
|  | module_param_named(number_of_msix, ipr_number_of_msix, int, 0); | 
|  | MODULE_PARM_DESC(number_of_msix, "Specify the number of MSIX interrupts to use on capable adapters (1 - 16).  (default:2)"); | 
|  | MODULE_LICENSE("GPL"); | 
|  | MODULE_VERSION(IPR_DRIVER_VERSION); | 
|  |  | 
|  | /*  A constant array of IOASCs/URCs/Error Messages */ | 
|  | static const | 
|  | struct ipr_error_table_t ipr_error_table[] = { | 
|  | {0x00000000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "8155: An unknown error was received"}, | 
|  | {0x00330000, 0, 0, | 
|  | "Soft underlength error"}, | 
|  | {0x005A0000, 0, 0, | 
|  | "Command to be cancelled not found"}, | 
|  | {0x00808000, 0, 0, | 
|  | "Qualified success"}, | 
|  | {0x01080000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFFE: Soft device bus error recovered by the IOA"}, | 
|  | {0x01088100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4101: Soft device bus fabric error"}, | 
|  | {0x01100100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFFC: Logical block guard error recovered by the device"}, | 
|  | {0x01100300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFFC: Logical block reference tag error recovered by the device"}, | 
|  | {0x01108300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4171: Recovered scatter list tag / sequence number error"}, | 
|  | {0x01109000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FF3D: Recovered logical block CRC error on IOA to Host transfer"}, | 
|  | {0x01109200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4171: Recovered logical block sequence number error on IOA to Host transfer"}, | 
|  | {0x0110A000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFFD: Recovered logical block reference tag error detected by the IOA"}, | 
|  | {0x0110A100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFFD: Logical block guard error recovered by the IOA"}, | 
|  | {0x01170600, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF9: Device sector reassign successful"}, | 
|  | {0x01170900, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF7: Media error recovered by device rewrite procedures"}, | 
|  | {0x01180200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "7001: IOA sector reassignment successful"}, | 
|  | {0x01180500, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF9: Soft media error. Sector reassignment recommended"}, | 
|  | {0x01180600, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF7: Media error recovered by IOA rewrite procedures"}, | 
|  | {0x01418000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FF3D: Soft PCI bus error recovered by the IOA"}, | 
|  | {0x01440000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF6: Device hardware error recovered by the IOA"}, | 
|  | {0x01448100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF6: Device hardware error recovered by the device"}, | 
|  | {0x01448200, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FF3D: Soft IOA error recovered by the IOA"}, | 
|  | {0x01448300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFFA: Undefined device response recovered by the IOA"}, | 
|  | {0x014A0000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF6: Device bus error, message or command phase"}, | 
|  | {0x014A8000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFFE: Task Management Function failed"}, | 
|  | {0x015D0000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF6: Failure prediction threshold exceeded"}, | 
|  | {0x015D9200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "8009: Impending cache battery pack failure"}, | 
|  | {0x02040100, 0, 0, | 
|  | "Logical Unit in process of becoming ready"}, | 
|  | {0x02040200, 0, 0, | 
|  | "Initializing command required"}, | 
|  | {0x02040400, 0, 0, | 
|  | "34FF: Disk device format in progress"}, | 
|  | {0x02040C00, 0, 0, | 
|  | "Logical unit not accessible, target port in unavailable state"}, | 
|  | {0x02048000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9070: IOA requested reset"}, | 
|  | {0x023F0000, 0, 0, | 
|  | "Synchronization required"}, | 
|  | {0x02408500, 0, 0, | 
|  | "IOA microcode download required"}, | 
|  | {0x02408600, 0, 0, | 
|  | "Device bus connection is prohibited by host"}, | 
|  | {0x024E0000, 0, 0, | 
|  | "No ready, IOA shutdown"}, | 
|  | {0x025A0000, 0, 0, | 
|  | "Not ready, IOA has been shutdown"}, | 
|  | {0x02670100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3020: Storage subsystem configuration error"}, | 
|  | {0x03110B00, 0, 0, | 
|  | "FFF5: Medium error, data unreadable, recommend reassign"}, | 
|  | {0x03110C00, 0, 0, | 
|  | "7000: Medium error, data unreadable, do not reassign"}, | 
|  | {0x03310000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF3: Disk media format bad"}, | 
|  | {0x04050000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3002: Addressed device failed to respond to selection"}, | 
|  | {0x04080000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3100: Device bus error"}, | 
|  | {0x04080100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3109: IOA timed out a device command"}, | 
|  | {0x04088000, 0, 0, | 
|  | "3120: SCSI bus is not operational"}, | 
|  | {0x04088100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4100: Hard device bus fabric error"}, | 
|  | {0x04100100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "310C: Logical block guard error detected by the device"}, | 
|  | {0x04100300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "310C: Logical block reference tag error detected by the device"}, | 
|  | {0x04108300, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4170: Scatter list tag / sequence number error"}, | 
|  | {0x04109000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "8150: Logical block CRC error on IOA to Host transfer"}, | 
|  | {0x04109200, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4170: Logical block sequence number error on IOA to Host transfer"}, | 
|  | {0x0410A000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "310D: Logical block reference tag error detected by the IOA"}, | 
|  | {0x0410A100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "310D: Logical block guard error detected by the IOA"}, | 
|  | {0x04118000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9000: IOA reserved area data check"}, | 
|  | {0x04118100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9001: IOA reserved area invalid data pattern"}, | 
|  | {0x04118200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9002: IOA reserved area LRC error"}, | 
|  | {0x04118300, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "Hardware Error, IOA metadata access error"}, | 
|  | {0x04320000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "102E: Out of alternate sectors for disk storage"}, | 
|  | {0x04330000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF4: Data transfer underlength error"}, | 
|  | {0x04338000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF4: Data transfer overlength error"}, | 
|  | {0x043E0100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3400: Logical unit failure"}, | 
|  | {0x04408500, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF4: Device microcode is corrupt"}, | 
|  | {0x04418000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "8150: PCI bus error"}, | 
|  | {0x04430000, 1, 0, | 
|  | "Unsupported device bus message received"}, | 
|  | {0x04440000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF4: Disk device problem"}, | 
|  | {0x04448200, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "8150: Permanent IOA failure"}, | 
|  | {0x04448300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3010: Disk device returned wrong response to IOA"}, | 
|  | {0x04448400, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "8151: IOA microcode error"}, | 
|  | {0x04448500, 0, 0, | 
|  | "Device bus status error"}, | 
|  | {0x04448600, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "8157: IOA error requiring IOA reset to recover"}, | 
|  | {0x04448700, 0, 0, | 
|  | "ATA device status error"}, | 
|  | {0x04490000, 0, 0, | 
|  | "Message reject received from the device"}, | 
|  | {0x04449200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "8008: A permanent cache battery pack failure occurred"}, | 
|  | {0x0444A000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9090: Disk unit has been modified after the last known status"}, | 
|  | {0x0444A200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9081: IOA detected device error"}, | 
|  | {0x0444A300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9082: IOA detected device error"}, | 
|  | {0x044A0000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3110: Device bus error, message or command phase"}, | 
|  | {0x044A8000, 1, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3110: SAS Command / Task Management Function failed"}, | 
|  | {0x04670400, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9091: Incorrect hardware configuration change has been detected"}, | 
|  | {0x04678000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9073: Invalid multi-adapter configuration"}, | 
|  | {0x04678100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4010: Incorrect connection between cascaded expanders"}, | 
|  | {0x04678200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4020: Connections exceed IOA design limits"}, | 
|  | {0x04678300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4030: Incorrect multipath connection"}, | 
|  | {0x04679000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4110: Unsupported enclosure function"}, | 
|  | {0x04679800, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4120: SAS cable VPD cannot be read"}, | 
|  | {0x046E0000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFF4: Command to logical unit failed"}, | 
|  | {0x05240000, 1, 0, | 
|  | "Illegal request, invalid request type or request packet"}, | 
|  | {0x05250000, 0, 0, | 
|  | "Illegal request, invalid resource handle"}, | 
|  | {0x05258000, 0, 0, | 
|  | "Illegal request, commands not allowed to this device"}, | 
|  | {0x05258100, 0, 0, | 
|  | "Illegal request, command not allowed to a secondary adapter"}, | 
|  | {0x05258200, 0, 0, | 
|  | "Illegal request, command not allowed to a non-optimized resource"}, | 
|  | {0x05260000, 0, 0, | 
|  | "Illegal request, invalid field in parameter list"}, | 
|  | {0x05260100, 0, 0, | 
|  | "Illegal request, parameter not supported"}, | 
|  | {0x05260200, 0, 0, | 
|  | "Illegal request, parameter value invalid"}, | 
|  | {0x052C0000, 0, 0, | 
|  | "Illegal request, command sequence error"}, | 
|  | {0x052C8000, 1, 0, | 
|  | "Illegal request, dual adapter support not enabled"}, | 
|  | {0x052C8100, 1, 0, | 
|  | "Illegal request, another cable connector was physically disabled"}, | 
|  | {0x054E8000, 1, 0, | 
|  | "Illegal request, inconsistent group id/group count"}, | 
|  | {0x06040500, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9031: Array protection temporarily suspended, protection resuming"}, | 
|  | {0x06040600, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9040: Array protection temporarily suspended, protection resuming"}, | 
|  | {0x060B0100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4080: IOA exceeded maximum operating temperature"}, | 
|  | {0x060B8000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4085: Service required"}, | 
|  | {0x06288000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3140: Device bus not ready to ready transition"}, | 
|  | {0x06290000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFFB: SCSI bus was reset"}, | 
|  | {0x06290500, 0, 0, | 
|  | "FFFE: SCSI bus transition to single ended"}, | 
|  | {0x06290600, 0, 0, | 
|  | "FFFE: SCSI bus transition to LVD"}, | 
|  | {0x06298000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "FFFB: SCSI bus was reset by another initiator"}, | 
|  | {0x063F0300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3029: A device replacement has occurred"}, | 
|  | {0x063F8300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4102: Device bus fabric performance degradation"}, | 
|  | {0x064C8000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9051: IOA cache data exists for a missing or failed device"}, | 
|  | {0x064C8100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9055: Auxiliary cache IOA contains cache data needed by the primary IOA"}, | 
|  | {0x06670100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9025: Disk unit is not supported at its physical location"}, | 
|  | {0x06670600, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3020: IOA detected a SCSI bus configuration error"}, | 
|  | {0x06678000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "3150: SCSI bus configuration error"}, | 
|  | {0x06678100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9074: Asymmetric advanced function disk configuration"}, | 
|  | {0x06678300, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4040: Incomplete multipath connection between IOA and enclosure"}, | 
|  | {0x06678400, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4041: Incomplete multipath connection between enclosure and device"}, | 
|  | {0x06678500, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9075: Incomplete multipath connection between IOA and remote IOA"}, | 
|  | {0x06678600, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9076: Configuration error, missing remote IOA"}, | 
|  | {0x06679100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4050: Enclosure does not support a required multipath function"}, | 
|  | {0x06679800, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4121: Configuration error, required cable is missing"}, | 
|  | {0x06679900, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4122: Cable is not plugged into the correct location on remote IOA"}, | 
|  | {0x06679A00, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4123: Configuration error, invalid cable vital product data"}, | 
|  | {0x06679B00, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4124: Configuration error, both cable ends are plugged into the same IOA"}, | 
|  | {0x06690000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4070: Logically bad block written on device"}, | 
|  | {0x06690200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9041: Array protection temporarily suspended"}, | 
|  | {0x06698200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9042: Corrupt array parity detected on specified device"}, | 
|  | {0x066B0200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9030: Array no longer protected due to missing or failed disk unit"}, | 
|  | {0x066B8000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9071: Link operational transition"}, | 
|  | {0x066B8100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9072: Link not operational transition"}, | 
|  | {0x066B8200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9032: Array exposed but still protected"}, | 
|  | {0x066B8300, 0, IPR_DEFAULT_LOG_LEVEL + 1, | 
|  | "70DD: Device forced failed by disrupt device command"}, | 
|  | {0x066B9100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4061: Multipath redundancy level got better"}, | 
|  | {0x066B9200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "4060: Multipath redundancy level got worse"}, | 
|  | {0x07270000, 0, 0, | 
|  | "Failure due to other device"}, | 
|  | {0x07278000, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9008: IOA does not support functions expected by devices"}, | 
|  | {0x07278100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9010: Cache data associated with attached devices cannot be found"}, | 
|  | {0x07278200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9011: Cache data belongs to devices other than those attached"}, | 
|  | {0x07278400, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9020: Array missing 2 or more devices with only 1 device present"}, | 
|  | {0x07278500, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9021: Array missing 2 or more devices with 2 or more devices present"}, | 
|  | {0x07278600, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9022: Exposed array is missing a required device"}, | 
|  | {0x07278700, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9023: Array member(s) not at required physical locations"}, | 
|  | {0x07278800, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9024: Array not functional due to present hardware configuration"}, | 
|  | {0x07278900, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9026: Array not functional due to present hardware configuration"}, | 
|  | {0x07278A00, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9027: Array is missing a device and parity is out of sync"}, | 
|  | {0x07278B00, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9028: Maximum number of arrays already exist"}, | 
|  | {0x07278C00, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9050: Required cache data cannot be located for a disk unit"}, | 
|  | {0x07278D00, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9052: Cache data exists for a device that has been modified"}, | 
|  | {0x07278F00, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9054: IOA resources not available due to previous problems"}, | 
|  | {0x07279100, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9092: Disk unit requires initialization before use"}, | 
|  | {0x07279200, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9029: Incorrect hardware configuration change has been detected"}, | 
|  | {0x07279600, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9060: One or more disk pairs are missing from an array"}, | 
|  | {0x07279700, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9061: One or more disks are missing from an array"}, | 
|  | {0x07279800, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9062: One or more disks are missing from an array"}, | 
|  | {0x07279900, 0, IPR_DEFAULT_LOG_LEVEL, | 
|  | "9063: Maximum number of functional arrays has been exceeded"}, | 
|  | {0x07279A00, 0, 0, | 
|  | "Data protect, other volume set problem"}, | 
|  | {0x0B260000, 0, 0, | 
|  | "Aborted command, invalid descriptor"}, | 
|  | {0x0B3F9000, 0, 0, | 
|  | "Target operating conditions have changed, dual adapter takeover"}, | 
|  | {0x0B530200, 0, 0, | 
|  | "Aborted command, medium removal prevented"}, | 
|  | {0x0B5A0000, 0, 0, | 
|  | "Command terminated by host"}, | 
|  | {0x0B5B8000, 0, 0, | 
|  | "Aborted command, command terminated by host"} | 
|  | }; | 
|  |  | 
|  | static const struct ipr_ses_table_entry ipr_ses_table[] = { | 
|  | { "2104-DL1        ", "XXXXXXXXXXXXXXXX", 80 }, | 
|  | { "2104-TL1        ", "XXXXXXXXXXXXXXXX", 80 }, | 
|  | { "HSBP07M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 7 slot */ | 
|  | { "HSBP05M P U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Hidive 5 slot */ | 
|  | { "HSBP05M S U2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* Bowtie */ | 
|  | { "HSBP06E ASU2SCSI", "XXXXXXXXXXXXXXXX", 80 }, /* MartinFenning */ | 
|  | { "2104-DU3        ", "XXXXXXXXXXXXXXXX", 160 }, | 
|  | { "2104-TU3        ", "XXXXXXXXXXXXXXXX", 160 }, | 
|  | { "HSBP04C RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 }, | 
|  | { "HSBP06E RSU2SCSI", "XXXXXXX*XXXXXXXX", 160 }, | 
|  | { "St  V1S2        ", "XXXXXXXXXXXXXXXX", 160 }, | 
|  | { "HSBPD4M  PU3SCSI", "XXXXXXX*XXXXXXXX", 160 }, | 
|  | { "VSBPD1H   U3SCSI", "XXXXXXX*XXXXXXXX", 160 } | 
|  | }; | 
|  |  | 
|  | /* | 
|  | *  Function Prototypes | 
|  | */ | 
|  | static int ipr_reset_alert(struct ipr_cmnd *); | 
|  | static void ipr_process_ccn(struct ipr_cmnd *); | 
|  | static void ipr_process_error(struct ipr_cmnd *); | 
|  | static void ipr_reset_ioa_job(struct ipr_cmnd *); | 
|  | static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *, | 
|  | enum ipr_shutdown_type); | 
|  |  | 
|  | #ifdef CONFIG_SCSI_IPR_TRACE | 
|  | /** | 
|  | * ipr_trc_hook - Add a trace entry to the driver trace | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @type:		trace type | 
|  | * @add_data:	additional data | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_trc_hook(struct ipr_cmnd *ipr_cmd, | 
|  | u8 type, u32 add_data) | 
|  | { | 
|  | struct ipr_trace_entry *trace_entry; | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | trace_entry = &ioa_cfg->trace[atomic_add_return | 
|  | (1, &ioa_cfg->trace_index)%IPR_NUM_TRACE_ENTRIES]; | 
|  | trace_entry->time = jiffies; | 
|  | trace_entry->op_code = ipr_cmd->ioarcb.cmd_pkt.cdb[0]; | 
|  | trace_entry->type = type; | 
|  | if (ipr_cmd->ioa_cfg->sis64) | 
|  | trace_entry->ata_op_code = ipr_cmd->i.ata_ioadl.regs.command; | 
|  | else | 
|  | trace_entry->ata_op_code = ipr_cmd->ioarcb.u.add_data.u.regs.command; | 
|  | trace_entry->cmd_index = ipr_cmd->cmd_index & 0xff; | 
|  | trace_entry->res_handle = ipr_cmd->ioarcb.res_handle; | 
|  | trace_entry->u.add_data = add_data; | 
|  | wmb(); | 
|  | } | 
|  | #else | 
|  | #define ipr_trc_hook(ipr_cmd, type, add_data) do { } while (0) | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * ipr_lock_and_done - Acquire lock and complete command | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Return value: | 
|  | *	none | 
|  | **/ | 
|  | static void ipr_lock_and_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | unsigned long lock_flags; | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | ipr_cmd->done(ipr_cmd); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reinit_ipr_cmnd - Re-initialize an IPR Cmnd block for reuse | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_reinit_ipr_cmnd(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa; | 
|  | struct ipr_ioasa64 *ioasa64 = &ipr_cmd->s.ioasa64; | 
|  | dma_addr_t dma_addr = ipr_cmd->dma_addr; | 
|  | int hrrq_id; | 
|  |  | 
|  | hrrq_id = ioarcb->cmd_pkt.hrrq_id; | 
|  | memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt)); | 
|  | ioarcb->cmd_pkt.hrrq_id = hrrq_id; | 
|  | ioarcb->data_transfer_length = 0; | 
|  | ioarcb->read_data_transfer_length = 0; | 
|  | ioarcb->ioadl_len = 0; | 
|  | ioarcb->read_ioadl_len = 0; | 
|  |  | 
|  | if (ipr_cmd->ioa_cfg->sis64) { | 
|  | ioarcb->u.sis64_addr_data.data_ioadl_addr = | 
|  | cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64)); | 
|  | ioasa64->u.gata.status = 0; | 
|  | } else { | 
|  | ioarcb->write_ioadl_addr = | 
|  | cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl)); | 
|  | ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr; | 
|  | ioasa->u.gata.status = 0; | 
|  | } | 
|  |  | 
|  | ioasa->hdr.ioasc = 0; | 
|  | ioasa->hdr.residual_data_len = 0; | 
|  | ipr_cmd->scsi_cmd = NULL; | 
|  | ipr_cmd->qc = NULL; | 
|  | ipr_cmd->sense_buffer[0] = 0; | 
|  | ipr_cmd->dma_use_sg = 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_init_ipr_cmnd - Initialize an IPR Cmnd block | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_init_ipr_cmnd(struct ipr_cmnd *ipr_cmd, | 
|  | void (*fast_done) (struct ipr_cmnd *)) | 
|  | { | 
|  | ipr_reinit_ipr_cmnd(ipr_cmd); | 
|  | ipr_cmd->u.scratch = 0; | 
|  | ipr_cmd->sibling = NULL; | 
|  | ipr_cmd->fast_done = fast_done; | 
|  | init_timer(&ipr_cmd->timer); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * __ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	pointer to ipr command struct | 
|  | **/ | 
|  | static | 
|  | struct ipr_cmnd *__ipr_get_free_ipr_cmnd(struct ipr_hrr_queue *hrrq) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd = NULL; | 
|  |  | 
|  | if (likely(!list_empty(&hrrq->hrrq_free_q))) { | 
|  | ipr_cmd = list_entry(hrrq->hrrq_free_q.next, | 
|  | struct ipr_cmnd, queue); | 
|  | list_del(&ipr_cmd->queue); | 
|  | } | 
|  |  | 
|  |  | 
|  | return ipr_cmd; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_free_ipr_cmnd - Get a free IPR Cmnd block and initialize it | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | *	pointer to ipr command struct | 
|  | **/ | 
|  | static | 
|  | struct ipr_cmnd *ipr_get_free_ipr_cmnd(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd = | 
|  | __ipr_get_free_ipr_cmnd(&ioa_cfg->hrrq[IPR_INIT_HRRQ]); | 
|  | ipr_init_ipr_cmnd(ipr_cmd, ipr_lock_and_done); | 
|  | return ipr_cmd; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_mask_and_clear_interrupts - Mask all and clear specified interrupts | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @clr_ints:     interrupts to clear | 
|  | * | 
|  | * This function masks all interrupts on the adapter, then clears the | 
|  | * interrupts specified in the mask | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_mask_and_clear_interrupts(struct ipr_ioa_cfg *ioa_cfg, | 
|  | u32 clr_ints) | 
|  | { | 
|  | volatile u32 int_reg; | 
|  | int i; | 
|  |  | 
|  | /* Stop new interrupts */ | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | spin_lock(&ioa_cfg->hrrq[i]._lock); | 
|  | ioa_cfg->hrrq[i].allow_interrupts = 0; | 
|  | spin_unlock(&ioa_cfg->hrrq[i]._lock); | 
|  | } | 
|  | wmb(); | 
|  |  | 
|  | /* Set interrupt mask to stop all new interrupts */ | 
|  | if (ioa_cfg->sis64) | 
|  | writeq(~0, ioa_cfg->regs.set_interrupt_mask_reg); | 
|  | else | 
|  | writel(~0, ioa_cfg->regs.set_interrupt_mask_reg); | 
|  |  | 
|  | /* Clear any pending interrupts */ | 
|  | if (ioa_cfg->sis64) | 
|  | writel(~0, ioa_cfg->regs.clr_interrupt_reg); | 
|  | writel(clr_ints, ioa_cfg->regs.clr_interrupt_reg32); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_save_pcix_cmd_reg - Save PCI-X command register | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / -EIO on failure | 
|  | **/ | 
|  | static int ipr_save_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX); | 
|  |  | 
|  | if (pcix_cmd_reg == 0) | 
|  | return 0; | 
|  |  | 
|  | if (pci_read_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD, | 
|  | &ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) { | 
|  | dev_err(&ioa_cfg->pdev->dev, "Failed to save PCI-X command register\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | ioa_cfg->saved_pcix_cmd_reg |= PCI_X_CMD_DPERR_E | PCI_X_CMD_ERO; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_set_pcix_cmd_reg - Setup PCI-X command register | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / -EIO on failure | 
|  | **/ | 
|  | static int ipr_set_pcix_cmd_reg(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int pcix_cmd_reg = pci_find_capability(ioa_cfg->pdev, PCI_CAP_ID_PCIX); | 
|  |  | 
|  | if (pcix_cmd_reg) { | 
|  | if (pci_write_config_word(ioa_cfg->pdev, pcix_cmd_reg + PCI_X_CMD, | 
|  | ioa_cfg->saved_pcix_cmd_reg) != PCIBIOS_SUCCESSFUL) { | 
|  | dev_err(&ioa_cfg->pdev->dev, "Failed to setup PCI-X command register\n"); | 
|  | return -EIO; | 
|  | } | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_sata_eh_done - done function for aborted SATA commands | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function is invoked for ops generated to SATA | 
|  | * devices which are being aborted. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_sata_eh_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ata_queued_cmd *qc = ipr_cmd->qc; | 
|  | struct ipr_sata_port *sata_port = qc->ap->private_data; | 
|  |  | 
|  | qc->err_mask |= AC_ERR_OTHER; | 
|  | sata_port->ioasa.status |= ATA_BUSY; | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | ata_qc_complete(qc); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_scsi_eh_done - mid-layer done function for aborted ops | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function is invoked by the interrupt handler for | 
|  | * ops generated by the SCSI mid-layer which are being aborted. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_scsi_eh_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | 
|  |  | 
|  | scsi_cmd->result |= (DID_ERROR << 16); | 
|  |  | 
|  | scsi_dma_unmap(ipr_cmd->scsi_cmd); | 
|  | scsi_cmd->scsi_done(scsi_cmd); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_fail_all_ops - Fails all outstanding ops. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * This function fails all outstanding ops. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_fail_all_ops(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd, *temp; | 
|  | struct ipr_hrr_queue *hrrq; | 
|  |  | 
|  | ENTER; | 
|  | for_each_hrrq(hrrq, ioa_cfg) { | 
|  | spin_lock(&hrrq->_lock); | 
|  | list_for_each_entry_safe(ipr_cmd, | 
|  | temp, &hrrq->hrrq_pending_q, queue) { | 
|  | list_del(&ipr_cmd->queue); | 
|  |  | 
|  | ipr_cmd->s.ioasa.hdr.ioasc = | 
|  | cpu_to_be32(IPR_IOASC_IOA_WAS_RESET); | 
|  | ipr_cmd->s.ioasa.hdr.ilid = | 
|  | cpu_to_be32(IPR_DRIVER_ILID); | 
|  |  | 
|  | if (ipr_cmd->scsi_cmd) | 
|  | ipr_cmd->done = ipr_scsi_eh_done; | 
|  | else if (ipr_cmd->qc) | 
|  | ipr_cmd->done = ipr_sata_eh_done; | 
|  |  | 
|  | ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, | 
|  | IPR_IOASC_IOA_WAS_RESET); | 
|  | del_timer(&ipr_cmd->timer); | 
|  | ipr_cmd->done(ipr_cmd); | 
|  | } | 
|  | spin_unlock(&hrrq->_lock); | 
|  | } | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_send_command -  Send driver initiated requests. | 
|  | * @ipr_cmd:		ipr command struct | 
|  | * | 
|  | * This function sends a command to the adapter using the correct write call. | 
|  | * In the case of sis64, calculate the ioarcb size required. Then or in the | 
|  | * appropriate bits. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_send_command(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | dma_addr_t send_dma_addr = ipr_cmd->dma_addr; | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | /* The default size is 256 bytes */ | 
|  | send_dma_addr |= 0x1; | 
|  |  | 
|  | /* If the number of ioadls * size of ioadl > 128 bytes, | 
|  | then use a 512 byte ioarcb */ | 
|  | if (ipr_cmd->dma_use_sg * sizeof(struct ipr_ioadl64_desc) > 128 ) | 
|  | send_dma_addr |= 0x4; | 
|  | writeq(send_dma_addr, ioa_cfg->regs.ioarrin_reg); | 
|  | } else | 
|  | writel(send_dma_addr, ioa_cfg->regs.ioarrin_reg); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_do_req -  Send driver initiated requests. | 
|  | * @ipr_cmd:		ipr command struct | 
|  | * @done:			done function | 
|  | * @timeout_func:	timeout function | 
|  | * @timeout:		timeout value | 
|  | * | 
|  | * This function sends the specified command to the adapter with the | 
|  | * timeout given. The done function is invoked on command completion. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_do_req(struct ipr_cmnd *ipr_cmd, | 
|  | void (*done) (struct ipr_cmnd *), | 
|  | void (*timeout_func) (struct ipr_cmnd *), u32 timeout) | 
|  | { | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_pending_q); | 
|  |  | 
|  | ipr_cmd->done = done; | 
|  |  | 
|  | ipr_cmd->timer.data = (unsigned long) ipr_cmd; | 
|  | ipr_cmd->timer.expires = jiffies + timeout; | 
|  | ipr_cmd->timer.function = (void (*)(unsigned long))timeout_func; | 
|  |  | 
|  | add_timer(&ipr_cmd->timer); | 
|  |  | 
|  | ipr_trc_hook(ipr_cmd, IPR_TRACE_START, 0); | 
|  |  | 
|  | ipr_send_command(ipr_cmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_internal_cmd_done - Op done function for an internally generated op. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function is the op done function for an internally generated, | 
|  | * blocking op. It simply wakes the sleeping thread. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_internal_cmd_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | if (ipr_cmd->sibling) | 
|  | ipr_cmd->sibling = NULL; | 
|  | else | 
|  | complete(&ipr_cmd->completion); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_init_ioadl - initialize the ioadl for the correct SIS type | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @dma_addr:	dma address | 
|  | * @len:	transfer length | 
|  | * @flags:	ioadl flag value | 
|  | * | 
|  | * This function initializes an ioadl in the case where there is only a single | 
|  | * descriptor. | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_init_ioadl(struct ipr_cmnd *ipr_cmd, dma_addr_t dma_addr, | 
|  | u32 len, int flags) | 
|  | { | 
|  | struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl; | 
|  | struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64; | 
|  |  | 
|  | ipr_cmd->dma_use_sg = 1; | 
|  |  | 
|  | if (ipr_cmd->ioa_cfg->sis64) { | 
|  | ioadl64->flags = cpu_to_be32(flags); | 
|  | ioadl64->data_len = cpu_to_be32(len); | 
|  | ioadl64->address = cpu_to_be64(dma_addr); | 
|  |  | 
|  | ipr_cmd->ioarcb.ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl64_desc)); | 
|  | ipr_cmd->ioarcb.data_transfer_length = cpu_to_be32(len); | 
|  | } else { | 
|  | ioadl->flags_and_data_len = cpu_to_be32(flags | len); | 
|  | ioadl->address = cpu_to_be32(dma_addr); | 
|  |  | 
|  | if (flags == IPR_IOADL_FLAGS_READ_LAST) { | 
|  | ipr_cmd->ioarcb.read_ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | 
|  | ipr_cmd->ioarcb.read_data_transfer_length = cpu_to_be32(len); | 
|  | } else { | 
|  | ipr_cmd->ioarcb.ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl_desc)); | 
|  | ipr_cmd->ioarcb.data_transfer_length = cpu_to_be32(len); | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_send_blocking_cmd - Send command and sleep on its completion. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @timeout_func:	function to invoke if command times out | 
|  | * @timeout:	timeout | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_send_blocking_cmd(struct ipr_cmnd *ipr_cmd, | 
|  | void (*timeout_func) (struct ipr_cmnd *ipr_cmd), | 
|  | u32 timeout) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | init_completion(&ipr_cmd->completion); | 
|  | ipr_do_req(ipr_cmd, ipr_internal_cmd_done, timeout_func, timeout); | 
|  |  | 
|  | spin_unlock_irq(ioa_cfg->host->host_lock); | 
|  | wait_for_completion(&ipr_cmd->completion); | 
|  | spin_lock_irq(ioa_cfg->host->host_lock); | 
|  | } | 
|  |  | 
|  | static int ipr_get_hrrq_index(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | if (ioa_cfg->hrrq_num == 1) | 
|  | return 0; | 
|  | else | 
|  | return (atomic_add_return(1, &ioa_cfg->hrrq_index) % (ioa_cfg->hrrq_num - 1)) + 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_send_hcam - Send an HCAM to the adapter. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @type:		HCAM type | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * This function will send a Host Controlled Async command to the adapter. | 
|  | * If HCAMs are currently not allowed to be issued to the adapter, it will | 
|  | * place the hostrcb on the free queue. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_send_hcam(struct ipr_ioa_cfg *ioa_cfg, u8 type, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_ioarcb *ioarcb; | 
|  |  | 
|  | if (ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) { | 
|  | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_pending_q); | 
|  | list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_pending_q); | 
|  |  | 
|  | ipr_cmd->u.hostrcb = hostrcb; | 
|  | ioarcb = &ipr_cmd->ioarcb; | 
|  |  | 
|  | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | 
|  | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_HCAM; | 
|  | ioarcb->cmd_pkt.cdb[0] = IPR_HOST_CONTROLLED_ASYNC; | 
|  | ioarcb->cmd_pkt.cdb[1] = type; | 
|  | ioarcb->cmd_pkt.cdb[7] = (sizeof(hostrcb->hcam) >> 8) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[8] = sizeof(hostrcb->hcam) & 0xff; | 
|  |  | 
|  | ipr_init_ioadl(ipr_cmd, hostrcb->hostrcb_dma, | 
|  | sizeof(hostrcb->hcam), IPR_IOADL_FLAGS_READ_LAST); | 
|  |  | 
|  | if (type == IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE) | 
|  | ipr_cmd->done = ipr_process_ccn; | 
|  | else | 
|  | ipr_cmd->done = ipr_process_error; | 
|  |  | 
|  | ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_IOA_RES_ADDR); | 
|  |  | 
|  | ipr_send_command(ipr_cmd); | 
|  | } else { | 
|  | list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_update_ata_class - Update the ata class in the resource entry | 
|  | * @res:	resource entry struct | 
|  | * @proto:	cfgte device bus protocol value | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_update_ata_class(struct ipr_resource_entry *res, unsigned int proto) | 
|  | { | 
|  | switch (proto) { | 
|  | case IPR_PROTO_SATA: | 
|  | case IPR_PROTO_SAS_STP: | 
|  | res->ata_class = ATA_DEV_ATA; | 
|  | break; | 
|  | case IPR_PROTO_SATA_ATAPI: | 
|  | case IPR_PROTO_SAS_STP_ATAPI: | 
|  | res->ata_class = ATA_DEV_ATAPI; | 
|  | break; | 
|  | default: | 
|  | res->ata_class = ATA_DEV_UNKNOWN; | 
|  | break; | 
|  | }; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_init_res_entry - Initialize a resource entry struct. | 
|  | * @res:	resource entry struct | 
|  | * @cfgtew:	config table entry wrapper struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_init_res_entry(struct ipr_resource_entry *res, | 
|  | struct ipr_config_table_entry_wrapper *cfgtew) | 
|  | { | 
|  | int found = 0; | 
|  | unsigned int proto; | 
|  | struct ipr_ioa_cfg *ioa_cfg = res->ioa_cfg; | 
|  | struct ipr_resource_entry *gscsi_res = NULL; | 
|  |  | 
|  | res->needs_sync_complete = 0; | 
|  | res->in_erp = 0; | 
|  | res->add_to_ml = 0; | 
|  | res->del_from_ml = 0; | 
|  | res->resetting_device = 0; | 
|  | res->reset_occurred = 0; | 
|  | res->sdev = NULL; | 
|  | res->sata_port = NULL; | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | proto = cfgtew->u.cfgte64->proto; | 
|  | res->res_flags = cfgtew->u.cfgte64->res_flags; | 
|  | res->qmodel = IPR_QUEUEING_MODEL64(res); | 
|  | res->type = cfgtew->u.cfgte64->res_type; | 
|  |  | 
|  | memcpy(res->res_path, &cfgtew->u.cfgte64->res_path, | 
|  | sizeof(res->res_path)); | 
|  |  | 
|  | res->bus = 0; | 
|  | memcpy(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun, | 
|  | sizeof(res->dev_lun.scsi_lun)); | 
|  | res->lun = scsilun_to_int(&res->dev_lun); | 
|  |  | 
|  | if (res->type == IPR_RES_TYPE_GENERIC_SCSI) { | 
|  | list_for_each_entry(gscsi_res, &ioa_cfg->used_res_q, queue) { | 
|  | if (gscsi_res->dev_id == cfgtew->u.cfgte64->dev_id) { | 
|  | found = 1; | 
|  | res->target = gscsi_res->target; | 
|  | break; | 
|  | } | 
|  | } | 
|  | if (!found) { | 
|  | res->target = find_first_zero_bit(ioa_cfg->target_ids, | 
|  | ioa_cfg->max_devs_supported); | 
|  | set_bit(res->target, ioa_cfg->target_ids); | 
|  | } | 
|  | } else if (res->type == IPR_RES_TYPE_IOAFP) { | 
|  | res->bus = IPR_IOAFP_VIRTUAL_BUS; | 
|  | res->target = 0; | 
|  | } else if (res->type == IPR_RES_TYPE_ARRAY) { | 
|  | res->bus = IPR_ARRAY_VIRTUAL_BUS; | 
|  | res->target = find_first_zero_bit(ioa_cfg->array_ids, | 
|  | ioa_cfg->max_devs_supported); | 
|  | set_bit(res->target, ioa_cfg->array_ids); | 
|  | } else if (res->type == IPR_RES_TYPE_VOLUME_SET) { | 
|  | res->bus = IPR_VSET_VIRTUAL_BUS; | 
|  | res->target = find_first_zero_bit(ioa_cfg->vset_ids, | 
|  | ioa_cfg->max_devs_supported); | 
|  | set_bit(res->target, ioa_cfg->vset_ids); | 
|  | } else { | 
|  | res->target = find_first_zero_bit(ioa_cfg->target_ids, | 
|  | ioa_cfg->max_devs_supported); | 
|  | set_bit(res->target, ioa_cfg->target_ids); | 
|  | } | 
|  | } else { | 
|  | proto = cfgtew->u.cfgte->proto; | 
|  | res->qmodel = IPR_QUEUEING_MODEL(res); | 
|  | res->flags = cfgtew->u.cfgte->flags; | 
|  | if (res->flags & IPR_IS_IOA_RESOURCE) | 
|  | res->type = IPR_RES_TYPE_IOAFP; | 
|  | else | 
|  | res->type = cfgtew->u.cfgte->rsvd_subtype & 0x0f; | 
|  |  | 
|  | res->bus = cfgtew->u.cfgte->res_addr.bus; | 
|  | res->target = cfgtew->u.cfgte->res_addr.target; | 
|  | res->lun = cfgtew->u.cfgte->res_addr.lun; | 
|  | res->lun_wwn = get_unaligned_be64(cfgtew->u.cfgte->lun_wwn); | 
|  | } | 
|  |  | 
|  | ipr_update_ata_class(res, proto); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_is_same_device - Determine if two devices are the same. | 
|  | * @res:	resource entry struct | 
|  | * @cfgtew:	config table entry wrapper struct | 
|  | * | 
|  | * Return value: | 
|  | * 	1 if the devices are the same / 0 otherwise | 
|  | **/ | 
|  | static int ipr_is_same_device(struct ipr_resource_entry *res, | 
|  | struct ipr_config_table_entry_wrapper *cfgtew) | 
|  | { | 
|  | if (res->ioa_cfg->sis64) { | 
|  | if (!memcmp(&res->dev_id, &cfgtew->u.cfgte64->dev_id, | 
|  | sizeof(cfgtew->u.cfgte64->dev_id)) && | 
|  | !memcmp(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun, | 
|  | sizeof(cfgtew->u.cfgte64->lun))) { | 
|  | return 1; | 
|  | } | 
|  | } else { | 
|  | if (res->bus == cfgtew->u.cfgte->res_addr.bus && | 
|  | res->target == cfgtew->u.cfgte->res_addr.target && | 
|  | res->lun == cfgtew->u.cfgte->res_addr.lun) | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * __ipr_format_res_path - Format the resource path for printing. | 
|  | * @res_path:	resource path | 
|  | * @buf:	buffer | 
|  | * @len:	length of buffer provided | 
|  | * | 
|  | * Return value: | 
|  | * 	pointer to buffer | 
|  | **/ | 
|  | static char *__ipr_format_res_path(u8 *res_path, char *buffer, int len) | 
|  | { | 
|  | int i; | 
|  | char *p = buffer; | 
|  |  | 
|  | *p = '\0'; | 
|  | p += snprintf(p, buffer + len - p, "%02X", res_path[0]); | 
|  | for (i = 1; res_path[i] != 0xff && ((i * 3) < len); i++) | 
|  | p += snprintf(p, buffer + len - p, "-%02X", res_path[i]); | 
|  |  | 
|  | return buffer; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_format_res_path - Format the resource path for printing. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @res_path:	resource path | 
|  | * @buf:	buffer | 
|  | * @len:	length of buffer provided | 
|  | * | 
|  | * Return value: | 
|  | *	pointer to buffer | 
|  | **/ | 
|  | static char *ipr_format_res_path(struct ipr_ioa_cfg *ioa_cfg, | 
|  | u8 *res_path, char *buffer, int len) | 
|  | { | 
|  | char *p = buffer; | 
|  |  | 
|  | *p = '\0'; | 
|  | p += snprintf(p, buffer + len - p, "%d/", ioa_cfg->host->host_no); | 
|  | __ipr_format_res_path(res_path, p, len - (buffer - p)); | 
|  | return buffer; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_update_res_entry - Update the resource entry. | 
|  | * @res:	resource entry struct | 
|  | * @cfgtew:	config table entry wrapper struct | 
|  | * | 
|  | * Return value: | 
|  | *      none | 
|  | **/ | 
|  | static void ipr_update_res_entry(struct ipr_resource_entry *res, | 
|  | struct ipr_config_table_entry_wrapper *cfgtew) | 
|  | { | 
|  | char buffer[IPR_MAX_RES_PATH_LENGTH]; | 
|  | unsigned int proto; | 
|  | int new_path = 0; | 
|  |  | 
|  | if (res->ioa_cfg->sis64) { | 
|  | res->flags = cfgtew->u.cfgte64->flags; | 
|  | res->res_flags = cfgtew->u.cfgte64->res_flags; | 
|  | res->type = cfgtew->u.cfgte64->res_type; | 
|  |  | 
|  | memcpy(&res->std_inq_data, &cfgtew->u.cfgte64->std_inq_data, | 
|  | sizeof(struct ipr_std_inq_data)); | 
|  |  | 
|  | res->qmodel = IPR_QUEUEING_MODEL64(res); | 
|  | proto = cfgtew->u.cfgte64->proto; | 
|  | res->res_handle = cfgtew->u.cfgte64->res_handle; | 
|  | res->dev_id = cfgtew->u.cfgte64->dev_id; | 
|  |  | 
|  | memcpy(&res->dev_lun.scsi_lun, &cfgtew->u.cfgte64->lun, | 
|  | sizeof(res->dev_lun.scsi_lun)); | 
|  |  | 
|  | if (memcmp(res->res_path, &cfgtew->u.cfgte64->res_path, | 
|  | sizeof(res->res_path))) { | 
|  | memcpy(res->res_path, &cfgtew->u.cfgte64->res_path, | 
|  | sizeof(res->res_path)); | 
|  | new_path = 1; | 
|  | } | 
|  |  | 
|  | if (res->sdev && new_path) | 
|  | sdev_printk(KERN_INFO, res->sdev, "Resource path: %s\n", | 
|  | ipr_format_res_path(res->ioa_cfg, | 
|  | res->res_path, buffer, sizeof(buffer))); | 
|  | } else { | 
|  | res->flags = cfgtew->u.cfgte->flags; | 
|  | if (res->flags & IPR_IS_IOA_RESOURCE) | 
|  | res->type = IPR_RES_TYPE_IOAFP; | 
|  | else | 
|  | res->type = cfgtew->u.cfgte->rsvd_subtype & 0x0f; | 
|  |  | 
|  | memcpy(&res->std_inq_data, &cfgtew->u.cfgte->std_inq_data, | 
|  | sizeof(struct ipr_std_inq_data)); | 
|  |  | 
|  | res->qmodel = IPR_QUEUEING_MODEL(res); | 
|  | proto = cfgtew->u.cfgte->proto; | 
|  | res->res_handle = cfgtew->u.cfgte->res_handle; | 
|  | } | 
|  |  | 
|  | ipr_update_ata_class(res, proto); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_clear_res_target - Clear the bit in the bit map representing the target | 
|  | * 			  for the resource. | 
|  | * @res:	resource entry struct | 
|  | * @cfgtew:	config table entry wrapper struct | 
|  | * | 
|  | * Return value: | 
|  | *      none | 
|  | **/ | 
|  | static void ipr_clear_res_target(struct ipr_resource_entry *res) | 
|  | { | 
|  | struct ipr_resource_entry *gscsi_res = NULL; | 
|  | struct ipr_ioa_cfg *ioa_cfg = res->ioa_cfg; | 
|  |  | 
|  | if (!ioa_cfg->sis64) | 
|  | return; | 
|  |  | 
|  | if (res->bus == IPR_ARRAY_VIRTUAL_BUS) | 
|  | clear_bit(res->target, ioa_cfg->array_ids); | 
|  | else if (res->bus == IPR_VSET_VIRTUAL_BUS) | 
|  | clear_bit(res->target, ioa_cfg->vset_ids); | 
|  | else if (res->bus == 0 && res->type == IPR_RES_TYPE_GENERIC_SCSI) { | 
|  | list_for_each_entry(gscsi_res, &ioa_cfg->used_res_q, queue) | 
|  | if (gscsi_res->dev_id == res->dev_id && gscsi_res != res) | 
|  | return; | 
|  | clear_bit(res->target, ioa_cfg->target_ids); | 
|  |  | 
|  | } else if (res->bus == 0) | 
|  | clear_bit(res->target, ioa_cfg->target_ids); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_handle_config_change - Handle a config change from the adapter | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | struct ipr_resource_entry *res = NULL; | 
|  | struct ipr_config_table_entry_wrapper cfgtew; | 
|  | __be32 cc_res_handle; | 
|  |  | 
|  | u32 is_ndn = 1; | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | cfgtew.u.cfgte64 = &hostrcb->hcam.u.ccn.u.cfgte64; | 
|  | cc_res_handle = cfgtew.u.cfgte64->res_handle; | 
|  | } else { | 
|  | cfgtew.u.cfgte = &hostrcb->hcam.u.ccn.u.cfgte; | 
|  | cc_res_handle = cfgtew.u.cfgte->res_handle; | 
|  | } | 
|  |  | 
|  | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | 
|  | if (res->res_handle == cc_res_handle) { | 
|  | is_ndn = 0; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (is_ndn) { | 
|  | if (list_empty(&ioa_cfg->free_res_q)) { | 
|  | ipr_send_hcam(ioa_cfg, | 
|  | IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, | 
|  | hostrcb); | 
|  | return; | 
|  | } | 
|  |  | 
|  | res = list_entry(ioa_cfg->free_res_q.next, | 
|  | struct ipr_resource_entry, queue); | 
|  |  | 
|  | list_del(&res->queue); | 
|  | ipr_init_res_entry(res, &cfgtew); | 
|  | list_add_tail(&res->queue, &ioa_cfg->used_res_q); | 
|  | } | 
|  |  | 
|  | ipr_update_res_entry(res, &cfgtew); | 
|  |  | 
|  | if (hostrcb->hcam.notify_type == IPR_HOST_RCB_NOTIF_TYPE_REM_ENTRY) { | 
|  | if (res->sdev) { | 
|  | res->del_from_ml = 1; | 
|  | res->res_handle = IPR_INVALID_RES_HANDLE; | 
|  | if (ioa_cfg->allow_ml_add_del) | 
|  | schedule_work(&ioa_cfg->work_q); | 
|  | } else { | 
|  | ipr_clear_res_target(res); | 
|  | list_move_tail(&res->queue, &ioa_cfg->free_res_q); | 
|  | } | 
|  | } else if (!res->sdev || res->del_from_ml) { | 
|  | res->add_to_ml = 1; | 
|  | if (ioa_cfg->allow_ml_add_del) | 
|  | schedule_work(&ioa_cfg->work_q); | 
|  | } | 
|  |  | 
|  | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_process_ccn - Op done function for a CCN. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function is the op done function for a configuration | 
|  | * change notification host controlled async from the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_process_ccn(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb; | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | list_del(&hostrcb->queue); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  |  | 
|  | if (ioasc) { | 
|  | if (ioasc != IPR_IOASC_IOA_WAS_RESET) | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Host RCB failed with IOASC: 0x%08X\n", ioasc); | 
|  |  | 
|  | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb); | 
|  | } else { | 
|  | ipr_handle_config_change(ioa_cfg, hostrcb); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * strip_and_pad_whitespace - Strip and pad trailing whitespace. | 
|  | * @i:		index into buffer | 
|  | * @buf:		string to modify | 
|  | * | 
|  | * This function will strip all trailing whitespace, pad the end | 
|  | * of the string with a single space, and NULL terminate the string. | 
|  | * | 
|  | * Return value: | 
|  | * 	new length of string | 
|  | **/ | 
|  | static int strip_and_pad_whitespace(int i, char *buf) | 
|  | { | 
|  | while (i && buf[i] == ' ') | 
|  | i--; | 
|  | buf[i+1] = ' '; | 
|  | buf[i+2] = '\0'; | 
|  | return i + 2; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_vpd_compact - Log the passed extended VPD compactly. | 
|  | * @prefix:		string to print at start of printk | 
|  | * @hostrcb:	hostrcb pointer | 
|  | * @vpd:		vendor/product id/sn struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_vpd_compact(char *prefix, struct ipr_hostrcb *hostrcb, | 
|  | struct ipr_vpd *vpd) | 
|  | { | 
|  | char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN + IPR_SERIAL_NUM_LEN + 3]; | 
|  | int i = 0; | 
|  |  | 
|  | memcpy(buffer, vpd->vpids.vendor_id, IPR_VENDOR_ID_LEN); | 
|  | i = strip_and_pad_whitespace(IPR_VENDOR_ID_LEN - 1, buffer); | 
|  |  | 
|  | memcpy(&buffer[i], vpd->vpids.product_id, IPR_PROD_ID_LEN); | 
|  | i = strip_and_pad_whitespace(i + IPR_PROD_ID_LEN - 1, buffer); | 
|  |  | 
|  | memcpy(&buffer[i], vpd->sn, IPR_SERIAL_NUM_LEN); | 
|  | buffer[IPR_SERIAL_NUM_LEN + i] = '\0'; | 
|  |  | 
|  | ipr_hcam_err(hostrcb, "%s VPID/SN: %s\n", prefix, buffer); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_vpd - Log the passed VPD to the error log. | 
|  | * @vpd:		vendor/product id/sn struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_vpd(struct ipr_vpd *vpd) | 
|  | { | 
|  | char buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN | 
|  | + IPR_SERIAL_NUM_LEN]; | 
|  |  | 
|  | memcpy(buffer, vpd->vpids.vendor_id, IPR_VENDOR_ID_LEN); | 
|  | memcpy(buffer + IPR_VENDOR_ID_LEN, vpd->vpids.product_id, | 
|  | IPR_PROD_ID_LEN); | 
|  | buffer[IPR_VENDOR_ID_LEN + IPR_PROD_ID_LEN] = '\0'; | 
|  | ipr_err("Vendor/Product ID: %s\n", buffer); | 
|  |  | 
|  | memcpy(buffer, vpd->sn, IPR_SERIAL_NUM_LEN); | 
|  | buffer[IPR_SERIAL_NUM_LEN] = '\0'; | 
|  | ipr_err("    Serial Number: %s\n", buffer); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_ext_vpd_compact - Log the passed extended VPD compactly. | 
|  | * @prefix:		string to print at start of printk | 
|  | * @hostrcb:	hostrcb pointer | 
|  | * @vpd:		vendor/product id/sn/wwn struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_ext_vpd_compact(char *prefix, struct ipr_hostrcb *hostrcb, | 
|  | struct ipr_ext_vpd *vpd) | 
|  | { | 
|  | ipr_log_vpd_compact(prefix, hostrcb, &vpd->vpd); | 
|  | ipr_hcam_err(hostrcb, "%s WWN: %08X%08X\n", prefix, | 
|  | be32_to_cpu(vpd->wwid[0]), be32_to_cpu(vpd->wwid[1])); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_ext_vpd - Log the passed extended VPD to the error log. | 
|  | * @vpd:		vendor/product id/sn/wwn struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_ext_vpd(struct ipr_ext_vpd *vpd) | 
|  | { | 
|  | ipr_log_vpd(&vpd->vpd); | 
|  | ipr_err("    WWN: %08X%08X\n", be32_to_cpu(vpd->wwid[0]), | 
|  | be32_to_cpu(vpd->wwid[1])); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_enhanced_cache_error - Log a cache error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_enhanced_cache_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | struct ipr_hostrcb_type_12_error *error; | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | error = &hostrcb->hcam.u.error64.u.type_12_error; | 
|  | else | 
|  | error = &hostrcb->hcam.u.error.u.type_12_error; | 
|  |  | 
|  | ipr_err("-----Current Configuration-----\n"); | 
|  | ipr_err("Cache Directory Card Information:\n"); | 
|  | ipr_log_ext_vpd(&error->ioa_vpd); | 
|  | ipr_err("Adapter Card Information:\n"); | 
|  | ipr_log_ext_vpd(&error->cfc_vpd); | 
|  |  | 
|  | ipr_err("-----Expected Configuration-----\n"); | 
|  | ipr_err("Cache Directory Card Information:\n"); | 
|  | ipr_log_ext_vpd(&error->ioa_last_attached_to_cfc_vpd); | 
|  | ipr_err("Adapter Card Information:\n"); | 
|  | ipr_log_ext_vpd(&error->cfc_last_attached_to_ioa_vpd); | 
|  |  | 
|  | ipr_err("Additional IOA Data: %08X %08X %08X\n", | 
|  | be32_to_cpu(error->ioa_data[0]), | 
|  | be32_to_cpu(error->ioa_data[1]), | 
|  | be32_to_cpu(error->ioa_data[2])); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_cache_error - Log a cache error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_cache_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | struct ipr_hostrcb_type_02_error *error = | 
|  | &hostrcb->hcam.u.error.u.type_02_error; | 
|  |  | 
|  | ipr_err("-----Current Configuration-----\n"); | 
|  | ipr_err("Cache Directory Card Information:\n"); | 
|  | ipr_log_vpd(&error->ioa_vpd); | 
|  | ipr_err("Adapter Card Information:\n"); | 
|  | ipr_log_vpd(&error->cfc_vpd); | 
|  |  | 
|  | ipr_err("-----Expected Configuration-----\n"); | 
|  | ipr_err("Cache Directory Card Information:\n"); | 
|  | ipr_log_vpd(&error->ioa_last_attached_to_cfc_vpd); | 
|  | ipr_err("Adapter Card Information:\n"); | 
|  | ipr_log_vpd(&error->cfc_last_attached_to_ioa_vpd); | 
|  |  | 
|  | ipr_err("Additional IOA Data: %08X %08X %08X\n", | 
|  | be32_to_cpu(error->ioa_data[0]), | 
|  | be32_to_cpu(error->ioa_data[1]), | 
|  | be32_to_cpu(error->ioa_data[2])); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_enhanced_config_error - Log a configuration error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_enhanced_config_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | int errors_logged, i; | 
|  | struct ipr_hostrcb_device_data_entry_enhanced *dev_entry; | 
|  | struct ipr_hostrcb_type_13_error *error; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error.u.type_13_error; | 
|  | errors_logged = be32_to_cpu(error->errors_logged); | 
|  |  | 
|  | ipr_err("Device Errors Detected/Logged: %d/%d\n", | 
|  | be32_to_cpu(error->errors_detected), errors_logged); | 
|  |  | 
|  | dev_entry = error->dev; | 
|  |  | 
|  | for (i = 0; i < errors_logged; i++, dev_entry++) { | 
|  | ipr_err_separator; | 
|  |  | 
|  | ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1); | 
|  | ipr_log_ext_vpd(&dev_entry->vpd); | 
|  |  | 
|  | ipr_err("-----New Device Information-----\n"); | 
|  | ipr_log_ext_vpd(&dev_entry->new_vpd); | 
|  |  | 
|  | ipr_err("Cache Directory Card Information:\n"); | 
|  | ipr_log_ext_vpd(&dev_entry->ioa_last_with_dev_vpd); | 
|  |  | 
|  | ipr_err("Adapter Card Information:\n"); | 
|  | ipr_log_ext_vpd(&dev_entry->cfc_last_with_dev_vpd); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_sis64_config_error - Log a device error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_sis64_config_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | int errors_logged, i; | 
|  | struct ipr_hostrcb64_device_data_entry_enhanced *dev_entry; | 
|  | struct ipr_hostrcb_type_23_error *error; | 
|  | char buffer[IPR_MAX_RES_PATH_LENGTH]; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error64.u.type_23_error; | 
|  | errors_logged = be32_to_cpu(error->errors_logged); | 
|  |  | 
|  | ipr_err("Device Errors Detected/Logged: %d/%d\n", | 
|  | be32_to_cpu(error->errors_detected), errors_logged); | 
|  |  | 
|  | dev_entry = error->dev; | 
|  |  | 
|  | for (i = 0; i < errors_logged; i++, dev_entry++) { | 
|  | ipr_err_separator; | 
|  |  | 
|  | ipr_err("Device %d : %s", i + 1, | 
|  | __ipr_format_res_path(dev_entry->res_path, | 
|  | buffer, sizeof(buffer))); | 
|  | ipr_log_ext_vpd(&dev_entry->vpd); | 
|  |  | 
|  | ipr_err("-----New Device Information-----\n"); | 
|  | ipr_log_ext_vpd(&dev_entry->new_vpd); | 
|  |  | 
|  | ipr_err("Cache Directory Card Information:\n"); | 
|  | ipr_log_ext_vpd(&dev_entry->ioa_last_with_dev_vpd); | 
|  |  | 
|  | ipr_err("Adapter Card Information:\n"); | 
|  | ipr_log_ext_vpd(&dev_entry->cfc_last_with_dev_vpd); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_config_error - Log a configuration error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_config_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | int errors_logged, i; | 
|  | struct ipr_hostrcb_device_data_entry *dev_entry; | 
|  | struct ipr_hostrcb_type_03_error *error; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error.u.type_03_error; | 
|  | errors_logged = be32_to_cpu(error->errors_logged); | 
|  |  | 
|  | ipr_err("Device Errors Detected/Logged: %d/%d\n", | 
|  | be32_to_cpu(error->errors_detected), errors_logged); | 
|  |  | 
|  | dev_entry = error->dev; | 
|  |  | 
|  | for (i = 0; i < errors_logged; i++, dev_entry++) { | 
|  | ipr_err_separator; | 
|  |  | 
|  | ipr_phys_res_err(ioa_cfg, dev_entry->dev_res_addr, "Device %d", i + 1); | 
|  | ipr_log_vpd(&dev_entry->vpd); | 
|  |  | 
|  | ipr_err("-----New Device Information-----\n"); | 
|  | ipr_log_vpd(&dev_entry->new_vpd); | 
|  |  | 
|  | ipr_err("Cache Directory Card Information:\n"); | 
|  | ipr_log_vpd(&dev_entry->ioa_last_with_dev_vpd); | 
|  |  | 
|  | ipr_err("Adapter Card Information:\n"); | 
|  | ipr_log_vpd(&dev_entry->cfc_last_with_dev_vpd); | 
|  |  | 
|  | ipr_err("Additional IOA Data: %08X %08X %08X %08X %08X\n", | 
|  | be32_to_cpu(dev_entry->ioa_data[0]), | 
|  | be32_to_cpu(dev_entry->ioa_data[1]), | 
|  | be32_to_cpu(dev_entry->ioa_data[2]), | 
|  | be32_to_cpu(dev_entry->ioa_data[3]), | 
|  | be32_to_cpu(dev_entry->ioa_data[4])); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_enhanced_array_error - Log an array configuration error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_enhanced_array_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | int i, num_entries; | 
|  | struct ipr_hostrcb_type_14_error *error; | 
|  | struct ipr_hostrcb_array_data_entry_enhanced *array_entry; | 
|  | const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' }; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error.u.type_14_error; | 
|  |  | 
|  | ipr_err_separator; | 
|  |  | 
|  | ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n", | 
|  | error->protection_level, | 
|  | ioa_cfg->host->host_no, | 
|  | error->last_func_vset_res_addr.bus, | 
|  | error->last_func_vset_res_addr.target, | 
|  | error->last_func_vset_res_addr.lun); | 
|  |  | 
|  | ipr_err_separator; | 
|  |  | 
|  | array_entry = error->array_member; | 
|  | num_entries = min_t(u32, be32_to_cpu(error->num_entries), | 
|  | ARRAY_SIZE(error->array_member)); | 
|  |  | 
|  | for (i = 0; i < num_entries; i++, array_entry++) { | 
|  | if (!memcmp(array_entry->vpd.vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN)) | 
|  | continue; | 
|  |  | 
|  | if (be32_to_cpu(error->exposed_mode_adn) == i) | 
|  | ipr_err("Exposed Array Member %d:\n", i); | 
|  | else | 
|  | ipr_err("Array Member %d:\n", i); | 
|  |  | 
|  | ipr_log_ext_vpd(&array_entry->vpd); | 
|  | ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location"); | 
|  | ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr, | 
|  | "Expected Location"); | 
|  |  | 
|  | ipr_err_separator; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_array_error - Log an array configuration error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_array_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | int i; | 
|  | struct ipr_hostrcb_type_04_error *error; | 
|  | struct ipr_hostrcb_array_data_entry *array_entry; | 
|  | const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' }; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error.u.type_04_error; | 
|  |  | 
|  | ipr_err_separator; | 
|  |  | 
|  | ipr_err("RAID %s Array Configuration: %d:%d:%d:%d\n", | 
|  | error->protection_level, | 
|  | ioa_cfg->host->host_no, | 
|  | error->last_func_vset_res_addr.bus, | 
|  | error->last_func_vset_res_addr.target, | 
|  | error->last_func_vset_res_addr.lun); | 
|  |  | 
|  | ipr_err_separator; | 
|  |  | 
|  | array_entry = error->array_member; | 
|  |  | 
|  | for (i = 0; i < 18; i++) { | 
|  | if (!memcmp(array_entry->vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN)) | 
|  | continue; | 
|  |  | 
|  | if (be32_to_cpu(error->exposed_mode_adn) == i) | 
|  | ipr_err("Exposed Array Member %d:\n", i); | 
|  | else | 
|  | ipr_err("Array Member %d:\n", i); | 
|  |  | 
|  | ipr_log_vpd(&array_entry->vpd); | 
|  |  | 
|  | ipr_phys_res_err(ioa_cfg, array_entry->dev_res_addr, "Current Location"); | 
|  | ipr_phys_res_err(ioa_cfg, array_entry->expected_dev_res_addr, | 
|  | "Expected Location"); | 
|  |  | 
|  | ipr_err_separator; | 
|  |  | 
|  | if (i == 9) | 
|  | array_entry = error->array_member2; | 
|  | else | 
|  | array_entry++; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_hex_data - Log additional hex IOA error data. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @data:		IOA error data | 
|  | * @len:		data length | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_hex_data(struct ipr_ioa_cfg *ioa_cfg, u32 *data, int len) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (len == 0) | 
|  | return; | 
|  |  | 
|  | if (ioa_cfg->log_level <= IPR_DEFAULT_LOG_LEVEL) | 
|  | len = min_t(int, len, IPR_DEFAULT_MAX_ERROR_DUMP); | 
|  |  | 
|  | for (i = 0; i < len / 4; i += 4) { | 
|  | ipr_err("%08X: %08X %08X %08X %08X\n", i*4, | 
|  | be32_to_cpu(data[i]), | 
|  | be32_to_cpu(data[i+1]), | 
|  | be32_to_cpu(data[i+2]), | 
|  | be32_to_cpu(data[i+3])); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_enhanced_dual_ioa_error - Log an enhanced dual adapter error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_enhanced_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | struct ipr_hostrcb_type_17_error *error; | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | error = &hostrcb->hcam.u.error64.u.type_17_error; | 
|  | else | 
|  | error = &hostrcb->hcam.u.error.u.type_17_error; | 
|  |  | 
|  | error->failure_reason[sizeof(error->failure_reason) - 1] = '\0'; | 
|  | strim(error->failure_reason); | 
|  |  | 
|  | ipr_hcam_err(hostrcb, "%s [PRC: %08X]\n", error->failure_reason, | 
|  | be32_to_cpu(hostrcb->hcam.u.error.prc)); | 
|  | ipr_log_ext_vpd_compact("Remote IOA", hostrcb, &error->vpd); | 
|  | ipr_log_hex_data(ioa_cfg, error->data, | 
|  | be32_to_cpu(hostrcb->hcam.length) - | 
|  | (offsetof(struct ipr_hostrcb_error, u) + | 
|  | offsetof(struct ipr_hostrcb_type_17_error, data))); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_dual_ioa_error - Log a dual adapter error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_dual_ioa_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | struct ipr_hostrcb_type_07_error *error; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error.u.type_07_error; | 
|  | error->failure_reason[sizeof(error->failure_reason) - 1] = '\0'; | 
|  | strim(error->failure_reason); | 
|  |  | 
|  | ipr_hcam_err(hostrcb, "%s [PRC: %08X]\n", error->failure_reason, | 
|  | be32_to_cpu(hostrcb->hcam.u.error.prc)); | 
|  | ipr_log_vpd_compact("Remote IOA", hostrcb, &error->vpd); | 
|  | ipr_log_hex_data(ioa_cfg, error->data, | 
|  | be32_to_cpu(hostrcb->hcam.length) - | 
|  | (offsetof(struct ipr_hostrcb_error, u) + | 
|  | offsetof(struct ipr_hostrcb_type_07_error, data))); | 
|  | } | 
|  |  | 
|  | static const struct { | 
|  | u8 active; | 
|  | char *desc; | 
|  | } path_active_desc[] = { | 
|  | { IPR_PATH_NO_INFO, "Path" }, | 
|  | { IPR_PATH_ACTIVE, "Active path" }, | 
|  | { IPR_PATH_NOT_ACTIVE, "Inactive path" } | 
|  | }; | 
|  |  | 
|  | static const struct { | 
|  | u8 state; | 
|  | char *desc; | 
|  | } path_state_desc[] = { | 
|  | { IPR_PATH_STATE_NO_INFO, "has no path state information available" }, | 
|  | { IPR_PATH_HEALTHY, "is healthy" }, | 
|  | { IPR_PATH_DEGRADED, "is degraded" }, | 
|  | { IPR_PATH_FAILED, "is failed" } | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_log_fabric_path - Log a fabric path error | 
|  | * @hostrcb:	hostrcb struct | 
|  | * @fabric:		fabric descriptor | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_fabric_path(struct ipr_hostrcb *hostrcb, | 
|  | struct ipr_hostrcb_fabric_desc *fabric) | 
|  | { | 
|  | int i, j; | 
|  | u8 path_state = fabric->path_state; | 
|  | u8 active = path_state & IPR_PATH_ACTIVE_MASK; | 
|  | u8 state = path_state & IPR_PATH_STATE_MASK; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(path_active_desc); i++) { | 
|  | if (path_active_desc[i].active != active) | 
|  | continue; | 
|  |  | 
|  | for (j = 0; j < ARRAY_SIZE(path_state_desc); j++) { | 
|  | if (path_state_desc[j].state != state) | 
|  | continue; | 
|  |  | 
|  | if (fabric->cascaded_expander == 0xff && fabric->phy == 0xff) { | 
|  | ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d\n", | 
|  | path_active_desc[i].desc, path_state_desc[j].desc, | 
|  | fabric->ioa_port); | 
|  | } else if (fabric->cascaded_expander == 0xff) { | 
|  | ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Phy=%d\n", | 
|  | path_active_desc[i].desc, path_state_desc[j].desc, | 
|  | fabric->ioa_port, fabric->phy); | 
|  | } else if (fabric->phy == 0xff) { | 
|  | ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Cascade=%d\n", | 
|  | path_active_desc[i].desc, path_state_desc[j].desc, | 
|  | fabric->ioa_port, fabric->cascaded_expander); | 
|  | } else { | 
|  | ipr_hcam_err(hostrcb, "%s %s: IOA Port=%d, Cascade=%d, Phy=%d\n", | 
|  | path_active_desc[i].desc, path_state_desc[j].desc, | 
|  | fabric->ioa_port, fabric->cascaded_expander, fabric->phy); | 
|  | } | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | ipr_err("Path state=%02X IOA Port=%d Cascade=%d Phy=%d\n", path_state, | 
|  | fabric->ioa_port, fabric->cascaded_expander, fabric->phy); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log64_fabric_path - Log a fabric path error | 
|  | * @hostrcb:	hostrcb struct | 
|  | * @fabric:		fabric descriptor | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log64_fabric_path(struct ipr_hostrcb *hostrcb, | 
|  | struct ipr_hostrcb64_fabric_desc *fabric) | 
|  | { | 
|  | int i, j; | 
|  | u8 path_state = fabric->path_state; | 
|  | u8 active = path_state & IPR_PATH_ACTIVE_MASK; | 
|  | u8 state = path_state & IPR_PATH_STATE_MASK; | 
|  | char buffer[IPR_MAX_RES_PATH_LENGTH]; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(path_active_desc); i++) { | 
|  | if (path_active_desc[i].active != active) | 
|  | continue; | 
|  |  | 
|  | for (j = 0; j < ARRAY_SIZE(path_state_desc); j++) { | 
|  | if (path_state_desc[j].state != state) | 
|  | continue; | 
|  |  | 
|  | ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s\n", | 
|  | path_active_desc[i].desc, path_state_desc[j].desc, | 
|  | ipr_format_res_path(hostrcb->ioa_cfg, | 
|  | fabric->res_path, | 
|  | buffer, sizeof(buffer))); | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | ipr_err("Path state=%02X Resource Path=%s\n", path_state, | 
|  | ipr_format_res_path(hostrcb->ioa_cfg, fabric->res_path, | 
|  | buffer, sizeof(buffer))); | 
|  | } | 
|  |  | 
|  | static const struct { | 
|  | u8 type; | 
|  | char *desc; | 
|  | } path_type_desc[] = { | 
|  | { IPR_PATH_CFG_IOA_PORT, "IOA port" }, | 
|  | { IPR_PATH_CFG_EXP_PORT, "Expander port" }, | 
|  | { IPR_PATH_CFG_DEVICE_PORT, "Device port" }, | 
|  | { IPR_PATH_CFG_DEVICE_LUN, "Device LUN" } | 
|  | }; | 
|  |  | 
|  | static const struct { | 
|  | u8 status; | 
|  | char *desc; | 
|  | } path_status_desc[] = { | 
|  | { IPR_PATH_CFG_NO_PROB, "Functional" }, | 
|  | { IPR_PATH_CFG_DEGRADED, "Degraded" }, | 
|  | { IPR_PATH_CFG_FAILED, "Failed" }, | 
|  | { IPR_PATH_CFG_SUSPECT, "Suspect" }, | 
|  | { IPR_PATH_NOT_DETECTED, "Missing" }, | 
|  | { IPR_PATH_INCORRECT_CONN, "Incorrectly connected" } | 
|  | }; | 
|  |  | 
|  | static const char *link_rate[] = { | 
|  | "unknown", | 
|  | "disabled", | 
|  | "phy reset problem", | 
|  | "spinup hold", | 
|  | "port selector", | 
|  | "unknown", | 
|  | "unknown", | 
|  | "unknown", | 
|  | "1.5Gbps", | 
|  | "3.0Gbps", | 
|  | "unknown", | 
|  | "unknown", | 
|  | "unknown", | 
|  | "unknown", | 
|  | "unknown", | 
|  | "unknown" | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_log_path_elem - Log a fabric path element. | 
|  | * @hostrcb:	hostrcb struct | 
|  | * @cfg:		fabric path element struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_path_elem(struct ipr_hostrcb *hostrcb, | 
|  | struct ipr_hostrcb_config_element *cfg) | 
|  | { | 
|  | int i, j; | 
|  | u8 type = cfg->type_status & IPR_PATH_CFG_TYPE_MASK; | 
|  | u8 status = cfg->type_status & IPR_PATH_CFG_STATUS_MASK; | 
|  |  | 
|  | if (type == IPR_PATH_CFG_NOT_EXIST) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(path_type_desc); i++) { | 
|  | if (path_type_desc[i].type != type) | 
|  | continue; | 
|  |  | 
|  | for (j = 0; j < ARRAY_SIZE(path_status_desc); j++) { | 
|  | if (path_status_desc[j].status != status) | 
|  | continue; | 
|  |  | 
|  | if (type == IPR_PATH_CFG_IOA_PORT) { | 
|  | ipr_hcam_err(hostrcb, "%s %s: Phy=%d, Link rate=%s, WWN=%08X%08X\n", | 
|  | path_status_desc[j].desc, path_type_desc[i].desc, | 
|  | cfg->phy, link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], | 
|  | be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); | 
|  | } else { | 
|  | if (cfg->cascaded_expander == 0xff && cfg->phy == 0xff) { | 
|  | ipr_hcam_err(hostrcb, "%s %s: Link rate=%s, WWN=%08X%08X\n", | 
|  | path_status_desc[j].desc, path_type_desc[i].desc, | 
|  | link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], | 
|  | be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); | 
|  | } else if (cfg->cascaded_expander == 0xff) { | 
|  | ipr_hcam_err(hostrcb, "%s %s: Phy=%d, Link rate=%s, " | 
|  | "WWN=%08X%08X\n", path_status_desc[j].desc, | 
|  | path_type_desc[i].desc, cfg->phy, | 
|  | link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], | 
|  | be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); | 
|  | } else if (cfg->phy == 0xff) { | 
|  | ipr_hcam_err(hostrcb, "%s %s: Cascade=%d, Link rate=%s, " | 
|  | "WWN=%08X%08X\n", path_status_desc[j].desc, | 
|  | path_type_desc[i].desc, cfg->cascaded_expander, | 
|  | link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], | 
|  | be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); | 
|  | } else { | 
|  | ipr_hcam_err(hostrcb, "%s %s: Cascade=%d, Phy=%d, Link rate=%s " | 
|  | "WWN=%08X%08X\n", path_status_desc[j].desc, | 
|  | path_type_desc[i].desc, cfg->cascaded_expander, cfg->phy, | 
|  | link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], | 
|  | be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); | 
|  | } | 
|  | } | 
|  | return; | 
|  | } | 
|  | } | 
|  |  | 
|  | ipr_hcam_err(hostrcb, "Path element=%02X: Cascade=%d Phy=%d Link rate=%s " | 
|  | "WWN=%08X%08X\n", cfg->type_status, cfg->cascaded_expander, cfg->phy, | 
|  | link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], | 
|  | be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log64_path_elem - Log a fabric path element. | 
|  | * @hostrcb:	hostrcb struct | 
|  | * @cfg:		fabric path element struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log64_path_elem(struct ipr_hostrcb *hostrcb, | 
|  | struct ipr_hostrcb64_config_element *cfg) | 
|  | { | 
|  | int i, j; | 
|  | u8 desc_id = cfg->descriptor_id & IPR_DESCRIPTOR_MASK; | 
|  | u8 type = cfg->type_status & IPR_PATH_CFG_TYPE_MASK; | 
|  | u8 status = cfg->type_status & IPR_PATH_CFG_STATUS_MASK; | 
|  | char buffer[IPR_MAX_RES_PATH_LENGTH]; | 
|  |  | 
|  | if (type == IPR_PATH_CFG_NOT_EXIST || desc_id != IPR_DESCRIPTOR_SIS64) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(path_type_desc); i++) { | 
|  | if (path_type_desc[i].type != type) | 
|  | continue; | 
|  |  | 
|  | for (j = 0; j < ARRAY_SIZE(path_status_desc); j++) { | 
|  | if (path_status_desc[j].status != status) | 
|  | continue; | 
|  |  | 
|  | ipr_hcam_err(hostrcb, "%s %s: Resource Path=%s, Link rate=%s, WWN=%08X%08X\n", | 
|  | path_status_desc[j].desc, path_type_desc[i].desc, | 
|  | ipr_format_res_path(hostrcb->ioa_cfg, | 
|  | cfg->res_path, buffer, sizeof(buffer)), | 
|  | link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], | 
|  | be32_to_cpu(cfg->wwid[0]), | 
|  | be32_to_cpu(cfg->wwid[1])); | 
|  | return; | 
|  | } | 
|  | } | 
|  | ipr_hcam_err(hostrcb, "Path element=%02X: Resource Path=%s, Link rate=%s " | 
|  | "WWN=%08X%08X\n", cfg->type_status, | 
|  | ipr_format_res_path(hostrcb->ioa_cfg, | 
|  | cfg->res_path, buffer, sizeof(buffer)), | 
|  | link_rate[cfg->link_rate & IPR_PHY_LINK_RATE_MASK], | 
|  | be32_to_cpu(cfg->wwid[0]), be32_to_cpu(cfg->wwid[1])); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_fabric_error - Log a fabric error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_fabric_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | struct ipr_hostrcb_type_20_error *error; | 
|  | struct ipr_hostrcb_fabric_desc *fabric; | 
|  | struct ipr_hostrcb_config_element *cfg; | 
|  | int i, add_len; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error.u.type_20_error; | 
|  | error->failure_reason[sizeof(error->failure_reason) - 1] = '\0'; | 
|  | ipr_hcam_err(hostrcb, "%s\n", error->failure_reason); | 
|  |  | 
|  | add_len = be32_to_cpu(hostrcb->hcam.length) - | 
|  | (offsetof(struct ipr_hostrcb_error, u) + | 
|  | offsetof(struct ipr_hostrcb_type_20_error, desc)); | 
|  |  | 
|  | for (i = 0, fabric = error->desc; i < error->num_entries; i++) { | 
|  | ipr_log_fabric_path(hostrcb, fabric); | 
|  | for_each_fabric_cfg(fabric, cfg) | 
|  | ipr_log_path_elem(hostrcb, cfg); | 
|  |  | 
|  | add_len -= be16_to_cpu(fabric->length); | 
|  | fabric = (struct ipr_hostrcb_fabric_desc *) | 
|  | ((unsigned long)fabric + be16_to_cpu(fabric->length)); | 
|  | } | 
|  |  | 
|  | ipr_log_hex_data(ioa_cfg, (u32 *)fabric, add_len); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_sis64_array_error - Log a sis64 array error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_sis64_array_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | int i, num_entries; | 
|  | struct ipr_hostrcb_type_24_error *error; | 
|  | struct ipr_hostrcb64_array_data_entry *array_entry; | 
|  | char buffer[IPR_MAX_RES_PATH_LENGTH]; | 
|  | const u8 zero_sn[IPR_SERIAL_NUM_LEN] = { [0 ... IPR_SERIAL_NUM_LEN-1] = '0' }; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error64.u.type_24_error; | 
|  |  | 
|  | ipr_err_separator; | 
|  |  | 
|  | ipr_err("RAID %s Array Configuration: %s\n", | 
|  | error->protection_level, | 
|  | ipr_format_res_path(ioa_cfg, error->last_res_path, | 
|  | buffer, sizeof(buffer))); | 
|  |  | 
|  | ipr_err_separator; | 
|  |  | 
|  | array_entry = error->array_member; | 
|  | num_entries = min_t(u32, error->num_entries, | 
|  | ARRAY_SIZE(error->array_member)); | 
|  |  | 
|  | for (i = 0; i < num_entries; i++, array_entry++) { | 
|  |  | 
|  | if (!memcmp(array_entry->vpd.vpd.sn, zero_sn, IPR_SERIAL_NUM_LEN)) | 
|  | continue; | 
|  |  | 
|  | if (error->exposed_mode_adn == i) | 
|  | ipr_err("Exposed Array Member %d:\n", i); | 
|  | else | 
|  | ipr_err("Array Member %d:\n", i); | 
|  |  | 
|  | ipr_err("Array Member %d:\n", i); | 
|  | ipr_log_ext_vpd(&array_entry->vpd); | 
|  | ipr_err("Current Location: %s\n", | 
|  | ipr_format_res_path(ioa_cfg, array_entry->res_path, | 
|  | buffer, sizeof(buffer))); | 
|  | ipr_err("Expected Location: %s\n", | 
|  | ipr_format_res_path(ioa_cfg, | 
|  | array_entry->expected_res_path, | 
|  | buffer, sizeof(buffer))); | 
|  |  | 
|  | ipr_err_separator; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_sis64_fabric_error - Log a sis64 fabric error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_sis64_fabric_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | struct ipr_hostrcb_type_30_error *error; | 
|  | struct ipr_hostrcb64_fabric_desc *fabric; | 
|  | struct ipr_hostrcb64_config_element *cfg; | 
|  | int i, add_len; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error64.u.type_30_error; | 
|  |  | 
|  | error->failure_reason[sizeof(error->failure_reason) - 1] = '\0'; | 
|  | ipr_hcam_err(hostrcb, "%s\n", error->failure_reason); | 
|  |  | 
|  | add_len = be32_to_cpu(hostrcb->hcam.length) - | 
|  | (offsetof(struct ipr_hostrcb64_error, u) + | 
|  | offsetof(struct ipr_hostrcb_type_30_error, desc)); | 
|  |  | 
|  | for (i = 0, fabric = error->desc; i < error->num_entries; i++) { | 
|  | ipr_log64_fabric_path(hostrcb, fabric); | 
|  | for_each_fabric_cfg(fabric, cfg) | 
|  | ipr_log64_path_elem(hostrcb, cfg); | 
|  |  | 
|  | add_len -= be16_to_cpu(fabric->length); | 
|  | fabric = (struct ipr_hostrcb64_fabric_desc *) | 
|  | ((unsigned long)fabric + be16_to_cpu(fabric->length)); | 
|  | } | 
|  |  | 
|  | ipr_log_hex_data(ioa_cfg, (u32 *)fabric, add_len); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_generic_error - Log an adapter error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_generic_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | ipr_log_hex_data(ioa_cfg, hostrcb->hcam.u.raw.data, | 
|  | be32_to_cpu(hostrcb->hcam.length)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_log_sis64_device_error - Log a cache error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_log_sis64_device_error(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | struct ipr_hostrcb_type_21_error *error; | 
|  | char buffer[IPR_MAX_RES_PATH_LENGTH]; | 
|  |  | 
|  | error = &hostrcb->hcam.u.error64.u.type_21_error; | 
|  |  | 
|  | ipr_err("-----Failing Device Information-----\n"); | 
|  | ipr_err("World Wide Unique ID: %08X%08X%08X%08X\n", | 
|  | be32_to_cpu(error->wwn[0]), be32_to_cpu(error->wwn[1]), | 
|  | be32_to_cpu(error->wwn[2]), be32_to_cpu(error->wwn[3])); | 
|  | ipr_err("Device Resource Path: %s\n", | 
|  | __ipr_format_res_path(error->res_path, | 
|  | buffer, sizeof(buffer))); | 
|  | error->primary_problem_desc[sizeof(error->primary_problem_desc) - 1] = '\0'; | 
|  | error->second_problem_desc[sizeof(error->second_problem_desc) - 1] = '\0'; | 
|  | ipr_err("Primary Problem Description: %s\n", error->primary_problem_desc); | 
|  | ipr_err("Secondary Problem Description:  %s\n", error->second_problem_desc); | 
|  | ipr_err("SCSI Sense Data:\n"); | 
|  | ipr_log_hex_data(ioa_cfg, error->sense_data, sizeof(error->sense_data)); | 
|  | ipr_err("SCSI Command Descriptor Block: \n"); | 
|  | ipr_log_hex_data(ioa_cfg, error->cdb, sizeof(error->cdb)); | 
|  |  | 
|  | ipr_err("Additional IOA Data:\n"); | 
|  | ipr_log_hex_data(ioa_cfg, error->ioa_data, be32_to_cpu(error->length_of_error)); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_error - Find the specfied IOASC in the ipr_error_table. | 
|  | * @ioasc:	IOASC | 
|  | * | 
|  | * This function will return the index of into the ipr_error_table | 
|  | * for the specified IOASC. If the IOASC is not in the table, | 
|  | * 0 will be returned, which points to the entry used for unknown errors. | 
|  | * | 
|  | * Return value: | 
|  | * 	index into the ipr_error_table | 
|  | **/ | 
|  | static u32 ipr_get_error(u32 ioasc) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ipr_error_table); i++) | 
|  | if (ipr_error_table[i].ioasc == (ioasc & IPR_IOASC_IOASC_MASK)) | 
|  | return i; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_handle_log_data - Log an adapter error. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @hostrcb:	hostrcb struct | 
|  | * | 
|  | * This function logs an adapter error to the system. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_handle_log_data(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_hostrcb *hostrcb) | 
|  | { | 
|  | u32 ioasc; | 
|  | int error_index; | 
|  |  | 
|  | if (hostrcb->hcam.notify_type != IPR_HOST_RCB_NOTIF_TYPE_ERROR_LOG_ENTRY) | 
|  | return; | 
|  |  | 
|  | if (hostrcb->hcam.notifications_lost == IPR_HOST_RCB_NOTIFICATIONS_LOST) | 
|  | dev_err(&ioa_cfg->pdev->dev, "Error notifications lost\n"); | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | ioasc = be32_to_cpu(hostrcb->hcam.u.error64.fd_ioasc); | 
|  | else | 
|  | ioasc = be32_to_cpu(hostrcb->hcam.u.error.fd_ioasc); | 
|  |  | 
|  | if (!ioa_cfg->sis64 && (ioasc == IPR_IOASC_BUS_WAS_RESET || | 
|  | ioasc == IPR_IOASC_BUS_WAS_RESET_BY_OTHER)) { | 
|  | /* Tell the midlayer we had a bus reset so it will handle the UA properly */ | 
|  | scsi_report_bus_reset(ioa_cfg->host, | 
|  | hostrcb->hcam.u.error.fd_res_addr.bus); | 
|  | } | 
|  |  | 
|  | error_index = ipr_get_error(ioasc); | 
|  |  | 
|  | if (!ipr_error_table[error_index].log_hcam) | 
|  | return; | 
|  |  | 
|  | ipr_hcam_err(hostrcb, "%s\n", ipr_error_table[error_index].error); | 
|  |  | 
|  | /* Set indication we have logged an error */ | 
|  | ioa_cfg->errors_logged++; | 
|  |  | 
|  | if (ioa_cfg->log_level < ipr_error_table[error_index].log_hcam) | 
|  | return; | 
|  | if (be32_to_cpu(hostrcb->hcam.length) > sizeof(hostrcb->hcam.u.raw)) | 
|  | hostrcb->hcam.length = cpu_to_be32(sizeof(hostrcb->hcam.u.raw)); | 
|  |  | 
|  | switch (hostrcb->hcam.overlay_id) { | 
|  | case IPR_HOST_RCB_OVERLAY_ID_2: | 
|  | ipr_log_cache_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_3: | 
|  | ipr_log_config_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_4: | 
|  | case IPR_HOST_RCB_OVERLAY_ID_6: | 
|  | ipr_log_array_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_7: | 
|  | ipr_log_dual_ioa_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_12: | 
|  | ipr_log_enhanced_cache_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_13: | 
|  | ipr_log_enhanced_config_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_14: | 
|  | case IPR_HOST_RCB_OVERLAY_ID_16: | 
|  | ipr_log_enhanced_array_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_17: | 
|  | ipr_log_enhanced_dual_ioa_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_20: | 
|  | ipr_log_fabric_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_21: | 
|  | ipr_log_sis64_device_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_23: | 
|  | ipr_log_sis64_config_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_24: | 
|  | case IPR_HOST_RCB_OVERLAY_ID_26: | 
|  | ipr_log_sis64_array_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_30: | 
|  | ipr_log_sis64_fabric_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | case IPR_HOST_RCB_OVERLAY_ID_1: | 
|  | case IPR_HOST_RCB_OVERLAY_ID_DEFAULT: | 
|  | default: | 
|  | ipr_log_generic_error(ioa_cfg, hostrcb); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_process_error - Op done function for an adapter error log. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function is the op done function for an error log host | 
|  | * controlled async from the adapter. It will log the error and | 
|  | * send the HCAM back to the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_process_error(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_hostrcb *hostrcb = ipr_cmd->u.hostrcb; | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  | u32 fd_ioasc; | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | fd_ioasc = be32_to_cpu(hostrcb->hcam.u.error64.fd_ioasc); | 
|  | else | 
|  | fd_ioasc = be32_to_cpu(hostrcb->hcam.u.error.fd_ioasc); | 
|  |  | 
|  | list_del(&hostrcb->queue); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  |  | 
|  | if (!ioasc) { | 
|  | ipr_handle_log_data(ioa_cfg, hostrcb); | 
|  | if (fd_ioasc == IPR_IOASC_NR_IOA_RESET_REQUIRED) | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_ABBREV); | 
|  | } else if (ioasc != IPR_IOASC_IOA_WAS_RESET) { | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Host RCB failed with IOASC: 0x%08X\n", ioasc); | 
|  | } | 
|  |  | 
|  | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_timeout -  An internally generated op has timed out. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function blocks host requests and initiates an | 
|  | * adapter reset. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_timeout(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | unsigned long lock_flags = 0; | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | ENTER; | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | ioa_cfg->errors_logged++; | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Adapter being reset due to command timeout.\n"); | 
|  |  | 
|  | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | 
|  | ioa_cfg->sdt_state = GET_DUMP; | 
|  |  | 
|  | if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_oper_timeout -  Adapter timed out transitioning to operational | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function blocks host requests and initiates an | 
|  | * adapter reset. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_oper_timeout(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | unsigned long lock_flags = 0; | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | ENTER; | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | ioa_cfg->errors_logged++; | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Adapter timed out transitioning to operational.\n"); | 
|  |  | 
|  | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | 
|  | ioa_cfg->sdt_state = GET_DUMP; | 
|  |  | 
|  | if (!ioa_cfg->in_reset_reload || ioa_cfg->reset_cmd == ipr_cmd) { | 
|  | if (ipr_fastfail) | 
|  | ioa_cfg->reset_retries += IPR_NUM_RESET_RELOAD_RETRIES; | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_find_ses_entry - Find matching SES in SES table | 
|  | * @res:	resource entry struct of SES | 
|  | * | 
|  | * Return value: | 
|  | * 	pointer to SES table entry / NULL on failure | 
|  | **/ | 
|  | static const struct ipr_ses_table_entry * | 
|  | ipr_find_ses_entry(struct ipr_resource_entry *res) | 
|  | { | 
|  | int i, j, matches; | 
|  | struct ipr_std_inq_vpids *vpids; | 
|  | const struct ipr_ses_table_entry *ste = ipr_ses_table; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ipr_ses_table); i++, ste++) { | 
|  | for (j = 0, matches = 0; j < IPR_PROD_ID_LEN; j++) { | 
|  | if (ste->compare_product_id_byte[j] == 'X') { | 
|  | vpids = &res->std_inq_data.vpids; | 
|  | if (vpids->product_id[j] == ste->product_id[j]) | 
|  | matches++; | 
|  | else | 
|  | break; | 
|  | } else | 
|  | matches++; | 
|  | } | 
|  |  | 
|  | if (matches == IPR_PROD_ID_LEN) | 
|  | return ste; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_max_scsi_speed - Determine max SCSI speed for a given bus | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @bus:		SCSI bus | 
|  | * @bus_width:	bus width | 
|  | * | 
|  | * Return value: | 
|  | *	SCSI bus speed in units of 100KHz, 1600 is 160 MHz | 
|  | *	For a 2-byte wide SCSI bus, the maximum transfer speed is | 
|  | *	twice the maximum transfer rate (e.g. for a wide enabled bus, | 
|  | *	max 160MHz = max 320MB/sec). | 
|  | **/ | 
|  | static u32 ipr_get_max_scsi_speed(struct ipr_ioa_cfg *ioa_cfg, u8 bus, u8 bus_width) | 
|  | { | 
|  | struct ipr_resource_entry *res; | 
|  | const struct ipr_ses_table_entry *ste; | 
|  | u32 max_xfer_rate = IPR_MAX_SCSI_RATE(bus_width); | 
|  |  | 
|  | /* Loop through each config table entry in the config table buffer */ | 
|  | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | 
|  | if (!(IPR_IS_SES_DEVICE(res->std_inq_data))) | 
|  | continue; | 
|  |  | 
|  | if (bus != res->bus) | 
|  | continue; | 
|  |  | 
|  | if (!(ste = ipr_find_ses_entry(res))) | 
|  | continue; | 
|  |  | 
|  | max_xfer_rate = (ste->max_bus_speed_limit * 10) / (bus_width / 8); | 
|  | } | 
|  |  | 
|  | return max_xfer_rate; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_wait_iodbg_ack - Wait for an IODEBUG ACK from the IOA | 
|  | * @ioa_cfg:		ioa config struct | 
|  | * @max_delay:		max delay in micro-seconds to wait | 
|  | * | 
|  | * Waits for an IODEBUG ACK from the IOA, doing busy looping. | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / other on failure | 
|  | **/ | 
|  | static int ipr_wait_iodbg_ack(struct ipr_ioa_cfg *ioa_cfg, int max_delay) | 
|  | { | 
|  | volatile u32 pcii_reg; | 
|  | int delay = 1; | 
|  |  | 
|  | /* Read interrupt reg until IOA signals IO Debug Acknowledge */ | 
|  | while (delay < max_delay) { | 
|  | pcii_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | 
|  |  | 
|  | if (pcii_reg & IPR_PCII_IO_DEBUG_ACKNOWLEDGE) | 
|  | return 0; | 
|  |  | 
|  | /* udelay cannot be used if delay is more than a few milliseconds */ | 
|  | if ((delay / 1000) > MAX_UDELAY_MS) | 
|  | mdelay(delay / 1000); | 
|  | else | 
|  | udelay(delay); | 
|  |  | 
|  | delay += delay; | 
|  | } | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_sis64_dump_data_section - Dump IOA memory | 
|  | * @ioa_cfg:			ioa config struct | 
|  | * @start_addr:			adapter address to dump | 
|  | * @dest:			destination kernel buffer | 
|  | * @length_in_words:		length to dump in 4 byte words | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success | 
|  | **/ | 
|  | static int ipr_get_sis64_dump_data_section(struct ipr_ioa_cfg *ioa_cfg, | 
|  | u32 start_addr, | 
|  | __be32 *dest, u32 length_in_words) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < length_in_words; i++) { | 
|  | writel(start_addr+(i*4), ioa_cfg->regs.dump_addr_reg); | 
|  | *dest = cpu_to_be32(readl(ioa_cfg->regs.dump_data_reg)); | 
|  | dest++; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_ldump_data_section - Dump IOA memory | 
|  | * @ioa_cfg:			ioa config struct | 
|  | * @start_addr:			adapter address to dump | 
|  | * @dest:				destination kernel buffer | 
|  | * @length_in_words:	length to dump in 4 byte words | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / -EIO on failure | 
|  | **/ | 
|  | static int ipr_get_ldump_data_section(struct ipr_ioa_cfg *ioa_cfg, | 
|  | u32 start_addr, | 
|  | __be32 *dest, u32 length_in_words) | 
|  | { | 
|  | volatile u32 temp_pcii_reg; | 
|  | int i, delay = 0; | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | return ipr_get_sis64_dump_data_section(ioa_cfg, start_addr, | 
|  | dest, length_in_words); | 
|  |  | 
|  | /* Write IOA interrupt reg starting LDUMP state  */ | 
|  | writel((IPR_UPROCI_RESET_ALERT | IPR_UPROCI_IO_DEBUG_ALERT), | 
|  | ioa_cfg->regs.set_uproc_interrupt_reg32); | 
|  |  | 
|  | /* Wait for IO debug acknowledge */ | 
|  | if (ipr_wait_iodbg_ack(ioa_cfg, | 
|  | IPR_LDUMP_MAX_LONG_ACK_DELAY_IN_USEC)) { | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "IOA dump long data transfer timeout\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* Signal LDUMP interlocked - clear IO debug ack */ | 
|  | writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, | 
|  | ioa_cfg->regs.clr_interrupt_reg); | 
|  |  | 
|  | /* Write Mailbox with starting address */ | 
|  | writel(start_addr, ioa_cfg->ioa_mailbox); | 
|  |  | 
|  | /* Signal address valid - clear IOA Reset alert */ | 
|  | writel(IPR_UPROCI_RESET_ALERT, | 
|  | ioa_cfg->regs.clr_uproc_interrupt_reg32); | 
|  |  | 
|  | for (i = 0; i < length_in_words; i++) { | 
|  | /* Wait for IO debug acknowledge */ | 
|  | if (ipr_wait_iodbg_ack(ioa_cfg, | 
|  | IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC)) { | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "IOA dump short data transfer timeout\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | /* Read data from mailbox and increment destination pointer */ | 
|  | *dest = cpu_to_be32(readl(ioa_cfg->ioa_mailbox)); | 
|  | dest++; | 
|  |  | 
|  | /* For all but the last word of data, signal data received */ | 
|  | if (i < (length_in_words - 1)) { | 
|  | /* Signal dump data received - Clear IO debug Ack */ | 
|  | writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, | 
|  | ioa_cfg->regs.clr_interrupt_reg); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* Signal end of block transfer. Set reset alert then clear IO debug ack */ | 
|  | writel(IPR_UPROCI_RESET_ALERT, | 
|  | ioa_cfg->regs.set_uproc_interrupt_reg32); | 
|  |  | 
|  | writel(IPR_UPROCI_IO_DEBUG_ALERT, | 
|  | ioa_cfg->regs.clr_uproc_interrupt_reg32); | 
|  |  | 
|  | /* Signal dump data received - Clear IO debug Ack */ | 
|  | writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, | 
|  | ioa_cfg->regs.clr_interrupt_reg); | 
|  |  | 
|  | /* Wait for IOA to signal LDUMP exit - IOA reset alert will be cleared */ | 
|  | while (delay < IPR_LDUMP_MAX_SHORT_ACK_DELAY_IN_USEC) { | 
|  | temp_pcii_reg = | 
|  | readl(ioa_cfg->regs.sense_uproc_interrupt_reg32); | 
|  |  | 
|  | if (!(temp_pcii_reg & IPR_UPROCI_RESET_ALERT)) | 
|  | return 0; | 
|  |  | 
|  | udelay(10); | 
|  | delay += 10; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SCSI_IPR_DUMP | 
|  | /** | 
|  | * ipr_sdt_copy - Copy Smart Dump Table to kernel buffer | 
|  | * @ioa_cfg:		ioa config struct | 
|  | * @pci_address:	adapter address | 
|  | * @length:			length of data to copy | 
|  | * | 
|  | * Copy data from PCI adapter to kernel buffer. | 
|  | * Note: length MUST be a 4 byte multiple | 
|  | * Return value: | 
|  | * 	0 on success / other on failure | 
|  | **/ | 
|  | static int ipr_sdt_copy(struct ipr_ioa_cfg *ioa_cfg, | 
|  | unsigned long pci_address, u32 length) | 
|  | { | 
|  | int bytes_copied = 0; | 
|  | int cur_len, rc, rem_len, rem_page_len, max_dump_size; | 
|  | __be32 *page; | 
|  | unsigned long lock_flags = 0; | 
|  | struct ipr_ioa_dump *ioa_dump = &ioa_cfg->dump->ioa_dump; | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | max_dump_size = IPR_FMT3_MAX_IOA_DUMP_SIZE; | 
|  | else | 
|  | max_dump_size = IPR_FMT2_MAX_IOA_DUMP_SIZE; | 
|  |  | 
|  | while (bytes_copied < length && | 
|  | (ioa_dump->hdr.len + bytes_copied) < max_dump_size) { | 
|  | if (ioa_dump->page_offset >= PAGE_SIZE || | 
|  | ioa_dump->page_offset == 0) { | 
|  | page = (__be32 *)__get_free_page(GFP_ATOMIC); | 
|  |  | 
|  | if (!page) { | 
|  | ipr_trace; | 
|  | return bytes_copied; | 
|  | } | 
|  |  | 
|  | ioa_dump->page_offset = 0; | 
|  | ioa_dump->ioa_data[ioa_dump->next_page_index] = page; | 
|  | ioa_dump->next_page_index++; | 
|  | } else | 
|  | page = ioa_dump->ioa_data[ioa_dump->next_page_index - 1]; | 
|  |  | 
|  | rem_len = length - bytes_copied; | 
|  | rem_page_len = PAGE_SIZE - ioa_dump->page_offset; | 
|  | cur_len = min(rem_len, rem_page_len); | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | if (ioa_cfg->sdt_state == ABORT_DUMP) { | 
|  | rc = -EIO; | 
|  | } else { | 
|  | rc = ipr_get_ldump_data_section(ioa_cfg, | 
|  | pci_address + bytes_copied, | 
|  | &page[ioa_dump->page_offset / 4], | 
|  | (cur_len / sizeof(u32))); | 
|  | } | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (!rc) { | 
|  | ioa_dump->page_offset += cur_len; | 
|  | bytes_copied += cur_len; | 
|  | } else { | 
|  | ipr_trace; | 
|  | break; | 
|  | } | 
|  | schedule(); | 
|  | } | 
|  |  | 
|  | return bytes_copied; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_init_dump_entry_hdr - Initialize a dump entry header. | 
|  | * @hdr:	dump entry header struct | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_init_dump_entry_hdr(struct ipr_dump_entry_header *hdr) | 
|  | { | 
|  | hdr->eye_catcher = IPR_DUMP_EYE_CATCHER; | 
|  | hdr->num_elems = 1; | 
|  | hdr->offset = sizeof(*hdr); | 
|  | hdr->status = IPR_DUMP_STATUS_SUCCESS; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_dump_ioa_type_data - Fill in the adapter type in the dump. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @driver_dump:	driver dump struct | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_dump_ioa_type_data(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_driver_dump *driver_dump) | 
|  | { | 
|  | struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data; | 
|  |  | 
|  | ipr_init_dump_entry_hdr(&driver_dump->ioa_type_entry.hdr); | 
|  | driver_dump->ioa_type_entry.hdr.len = | 
|  | sizeof(struct ipr_dump_ioa_type_entry) - | 
|  | sizeof(struct ipr_dump_entry_header); | 
|  | driver_dump->ioa_type_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY; | 
|  | driver_dump->ioa_type_entry.hdr.id = IPR_DUMP_DRIVER_TYPE_ID; | 
|  | driver_dump->ioa_type_entry.type = ioa_cfg->type; | 
|  | driver_dump->ioa_type_entry.fw_version = (ucode_vpd->major_release << 24) | | 
|  | (ucode_vpd->card_type << 16) | (ucode_vpd->minor_release[0] << 8) | | 
|  | ucode_vpd->minor_release[1]; | 
|  | driver_dump->hdr.num_entries++; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_dump_version_data - Fill in the driver version in the dump. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @driver_dump:	driver dump struct | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_dump_version_data(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_driver_dump *driver_dump) | 
|  | { | 
|  | ipr_init_dump_entry_hdr(&driver_dump->version_entry.hdr); | 
|  | driver_dump->version_entry.hdr.len = | 
|  | sizeof(struct ipr_dump_version_entry) - | 
|  | sizeof(struct ipr_dump_entry_header); | 
|  | driver_dump->version_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII; | 
|  | driver_dump->version_entry.hdr.id = IPR_DUMP_DRIVER_VERSION_ID; | 
|  | strcpy(driver_dump->version_entry.version, IPR_DRIVER_VERSION); | 
|  | driver_dump->hdr.num_entries++; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_dump_trace_data - Fill in the IOA trace in the dump. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @driver_dump:	driver dump struct | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_dump_trace_data(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_driver_dump *driver_dump) | 
|  | { | 
|  | ipr_init_dump_entry_hdr(&driver_dump->trace_entry.hdr); | 
|  | driver_dump->trace_entry.hdr.len = | 
|  | sizeof(struct ipr_dump_trace_entry) - | 
|  | sizeof(struct ipr_dump_entry_header); | 
|  | driver_dump->trace_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY; | 
|  | driver_dump->trace_entry.hdr.id = IPR_DUMP_TRACE_ID; | 
|  | memcpy(driver_dump->trace_entry.trace, ioa_cfg->trace, IPR_TRACE_SIZE); | 
|  | driver_dump->hdr.num_entries++; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_dump_location_data - Fill in the IOA location in the dump. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @driver_dump:	driver dump struct | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_dump_location_data(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_driver_dump *driver_dump) | 
|  | { | 
|  | ipr_init_dump_entry_hdr(&driver_dump->location_entry.hdr); | 
|  | driver_dump->location_entry.hdr.len = | 
|  | sizeof(struct ipr_dump_location_entry) - | 
|  | sizeof(struct ipr_dump_entry_header); | 
|  | driver_dump->location_entry.hdr.data_type = IPR_DUMP_DATA_TYPE_ASCII; | 
|  | driver_dump->location_entry.hdr.id = IPR_DUMP_LOCATION_ID; | 
|  | strcpy(driver_dump->location_entry.location, dev_name(&ioa_cfg->pdev->dev)); | 
|  | driver_dump->hdr.num_entries++; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_ioa_dump - Perform a dump of the driver and adapter. | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @dump:		dump struct | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_get_ioa_dump(struct ipr_ioa_cfg *ioa_cfg, struct ipr_dump *dump) | 
|  | { | 
|  | unsigned long start_addr, sdt_word; | 
|  | unsigned long lock_flags = 0; | 
|  | struct ipr_driver_dump *driver_dump = &dump->driver_dump; | 
|  | struct ipr_ioa_dump *ioa_dump = &dump->ioa_dump; | 
|  | u32 num_entries, max_num_entries, start_off, end_off; | 
|  | u32 max_dump_size, bytes_to_copy, bytes_copied, rc; | 
|  | struct ipr_sdt *sdt; | 
|  | int valid = 1; | 
|  | int i; | 
|  |  | 
|  | ENTER; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (ioa_cfg->sdt_state != READ_DUMP) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | ssleep(IPR_DUMP_DELAY_SECONDS); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | } | 
|  |  | 
|  | start_addr = readl(ioa_cfg->ioa_mailbox); | 
|  |  | 
|  | if (!ioa_cfg->sis64 && !ipr_sdt_is_fmt2(start_addr)) { | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Invalid dump table format: %lx\n", start_addr); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | dev_err(&ioa_cfg->pdev->dev, "Dump of IOA initiated\n"); | 
|  |  | 
|  | driver_dump->hdr.eye_catcher = IPR_DUMP_EYE_CATCHER; | 
|  |  | 
|  | /* Initialize the overall dump header */ | 
|  | driver_dump->hdr.len = sizeof(struct ipr_driver_dump); | 
|  | driver_dump->hdr.num_entries = 1; | 
|  | driver_dump->hdr.first_entry_offset = sizeof(struct ipr_dump_header); | 
|  | driver_dump->hdr.status = IPR_DUMP_STATUS_SUCCESS; | 
|  | driver_dump->hdr.os = IPR_DUMP_OS_LINUX; | 
|  | driver_dump->hdr.driver_name = IPR_DUMP_DRIVER_NAME; | 
|  |  | 
|  | ipr_dump_version_data(ioa_cfg, driver_dump); | 
|  | ipr_dump_location_data(ioa_cfg, driver_dump); | 
|  | ipr_dump_ioa_type_data(ioa_cfg, driver_dump); | 
|  | ipr_dump_trace_data(ioa_cfg, driver_dump); | 
|  |  | 
|  | /* Update dump_header */ | 
|  | driver_dump->hdr.len += sizeof(struct ipr_dump_entry_header); | 
|  |  | 
|  | /* IOA Dump entry */ | 
|  | ipr_init_dump_entry_hdr(&ioa_dump->hdr); | 
|  | ioa_dump->hdr.len = 0; | 
|  | ioa_dump->hdr.data_type = IPR_DUMP_DATA_TYPE_BINARY; | 
|  | ioa_dump->hdr.id = IPR_DUMP_IOA_DUMP_ID; | 
|  |  | 
|  | /* First entries in sdt are actually a list of dump addresses and | 
|  | lengths to gather the real dump data.  sdt represents the pointer | 
|  | to the ioa generated dump table.  Dump data will be extracted based | 
|  | on entries in this table */ | 
|  | sdt = &ioa_dump->sdt; | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | max_num_entries = IPR_FMT3_NUM_SDT_ENTRIES; | 
|  | max_dump_size = IPR_FMT3_MAX_IOA_DUMP_SIZE; | 
|  | } else { | 
|  | max_num_entries = IPR_FMT2_NUM_SDT_ENTRIES; | 
|  | max_dump_size = IPR_FMT2_MAX_IOA_DUMP_SIZE; | 
|  | } | 
|  |  | 
|  | bytes_to_copy = offsetof(struct ipr_sdt, entry) + | 
|  | (max_num_entries * sizeof(struct ipr_sdt_entry)); | 
|  | rc = ipr_get_ldump_data_section(ioa_cfg, start_addr, (__be32 *)sdt, | 
|  | bytes_to_copy / sizeof(__be32)); | 
|  |  | 
|  | /* Smart Dump table is ready to use and the first entry is valid */ | 
|  | if (rc || ((be32_to_cpu(sdt->hdr.state) != IPR_FMT3_SDT_READY_TO_USE) && | 
|  | (be32_to_cpu(sdt->hdr.state) != IPR_FMT2_SDT_READY_TO_USE))) { | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Dump of IOA failed. Dump table not valid: %d, %X.\n", | 
|  | rc, be32_to_cpu(sdt->hdr.state)); | 
|  | driver_dump->hdr.status = IPR_DUMP_STATUS_FAILED; | 
|  | ioa_cfg->sdt_state = DUMP_OBTAINED; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | num_entries = be32_to_cpu(sdt->hdr.num_entries_used); | 
|  |  | 
|  | if (num_entries > max_num_entries) | 
|  | num_entries = max_num_entries; | 
|  |  | 
|  | /* Update dump length to the actual data to be copied */ | 
|  | dump->driver_dump.hdr.len += sizeof(struct ipr_sdt_header); | 
|  | if (ioa_cfg->sis64) | 
|  | dump->driver_dump.hdr.len += num_entries * sizeof(struct ipr_sdt_entry); | 
|  | else | 
|  | dump->driver_dump.hdr.len += max_num_entries * sizeof(struct ipr_sdt_entry); | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | for (i = 0; i < num_entries; i++) { | 
|  | if (ioa_dump->hdr.len > max_dump_size) { | 
|  | driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS; | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (sdt->entry[i].flags & IPR_SDT_VALID_ENTRY) { | 
|  | sdt_word = be32_to_cpu(sdt->entry[i].start_token); | 
|  | if (ioa_cfg->sis64) | 
|  | bytes_to_copy = be32_to_cpu(sdt->entry[i].end_token); | 
|  | else { | 
|  | start_off = sdt_word & IPR_FMT2_MBX_ADDR_MASK; | 
|  | end_off = be32_to_cpu(sdt->entry[i].end_token); | 
|  |  | 
|  | if (ipr_sdt_is_fmt2(sdt_word) && sdt_word) | 
|  | bytes_to_copy = end_off - start_off; | 
|  | else | 
|  | valid = 0; | 
|  | } | 
|  | if (valid) { | 
|  | if (bytes_to_copy > max_dump_size) { | 
|  | sdt->entry[i].flags &= ~IPR_SDT_VALID_ENTRY; | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* Copy data from adapter to driver buffers */ | 
|  | bytes_copied = ipr_sdt_copy(ioa_cfg, sdt_word, | 
|  | bytes_to_copy); | 
|  |  | 
|  | ioa_dump->hdr.len += bytes_copied; | 
|  |  | 
|  | if (bytes_copied != bytes_to_copy) { | 
|  | driver_dump->hdr.status = IPR_DUMP_STATUS_QUAL_SUCCESS; | 
|  | break; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | dev_err(&ioa_cfg->pdev->dev, "Dump of IOA completed.\n"); | 
|  |  | 
|  | /* Update dump_header */ | 
|  | driver_dump->hdr.len += ioa_dump->hdr.len; | 
|  | wmb(); | 
|  | ioa_cfg->sdt_state = DUMP_OBTAINED; | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | #else | 
|  | #define ipr_get_ioa_dump(ioa_cfg, dump) do { } while (0) | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * ipr_release_dump - Free adapter dump memory | 
|  | * @kref:	kref struct | 
|  | * | 
|  | * Return value: | 
|  | *	nothing | 
|  | **/ | 
|  | static void ipr_release_dump(struct kref *kref) | 
|  | { | 
|  | struct ipr_dump *dump = container_of(kref, struct ipr_dump, kref); | 
|  | struct ipr_ioa_cfg *ioa_cfg = dump->ioa_cfg; | 
|  | unsigned long lock_flags = 0; | 
|  | int i; | 
|  |  | 
|  | ENTER; | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | ioa_cfg->dump = NULL; | 
|  | ioa_cfg->sdt_state = INACTIVE; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | for (i = 0; i < dump->ioa_dump.next_page_index; i++) | 
|  | free_page((unsigned long) dump->ioa_dump.ioa_data[i]); | 
|  |  | 
|  | vfree(dump->ioa_dump.ioa_data); | 
|  | kfree(dump); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_worker_thread - Worker thread | 
|  | * @work:		ioa config struct | 
|  | * | 
|  | * Called at task level from a work thread. This function takes care | 
|  | * of adding and removing device from the mid-layer as configuration | 
|  | * changes are detected by the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_worker_thread(struct work_struct *work) | 
|  | { | 
|  | unsigned long lock_flags; | 
|  | struct ipr_resource_entry *res; | 
|  | struct scsi_device *sdev; | 
|  | struct ipr_dump *dump; | 
|  | struct ipr_ioa_cfg *ioa_cfg = | 
|  | container_of(work, struct ipr_ioa_cfg, work_q); | 
|  | u8 bus, target, lun; | 
|  | int did_work; | 
|  |  | 
|  | ENTER; | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (ioa_cfg->sdt_state == READ_DUMP) { | 
|  | dump = ioa_cfg->dump; | 
|  | if (!dump) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return; | 
|  | } | 
|  | kref_get(&dump->kref); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | ipr_get_ioa_dump(ioa_cfg, dump); | 
|  | kref_put(&dump->kref, ipr_release_dump); | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | if (ioa_cfg->sdt_state == DUMP_OBTAINED && !ioa_cfg->dump_timeout) | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | restart: | 
|  | do { | 
|  | did_work = 0; | 
|  | if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds || | 
|  | !ioa_cfg->allow_ml_add_del) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | 
|  | if (res->del_from_ml && res->sdev) { | 
|  | did_work = 1; | 
|  | sdev = res->sdev; | 
|  | if (!scsi_device_get(sdev)) { | 
|  | if (!res->add_to_ml) | 
|  | list_move_tail(&res->queue, &ioa_cfg->free_res_q); | 
|  | else | 
|  | res->del_from_ml = 0; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | scsi_remove_device(sdev); | 
|  | scsi_device_put(sdev); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | } | 
|  | break; | 
|  | } | 
|  | } | 
|  | } while (did_work); | 
|  |  | 
|  | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | 
|  | if (res->add_to_ml) { | 
|  | bus = res->bus; | 
|  | target = res->target; | 
|  | lun = res->lun; | 
|  | res->add_to_ml = 0; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | scsi_add_device(ioa_cfg->host, bus, target, lun); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | goto restart; | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | kobject_uevent(&ioa_cfg->host->shost_dev.kobj, KOBJ_CHANGE); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_SCSI_IPR_TRACE | 
|  | /** | 
|  | * ipr_read_trace - Dump the adapter trace | 
|  | * @filp:		open sysfs file | 
|  | * @kobj:		kobject struct | 
|  | * @bin_attr:		bin_attribute struct | 
|  | * @buf:		buffer | 
|  | * @off:		offset | 
|  | * @count:		buffer size | 
|  | * | 
|  | * Return value: | 
|  | *	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_read_trace(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *bin_attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct device *dev = container_of(kobj, struct device, kobj); | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long lock_flags = 0; | 
|  | ssize_t ret; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | ret = memory_read_from_buffer(buf, count, &off, ioa_cfg->trace, | 
|  | IPR_TRACE_SIZE); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static struct bin_attribute ipr_trace_attr = { | 
|  | .attr =	{ | 
|  | .name = "trace", | 
|  | .mode = S_IRUGO, | 
|  | }, | 
|  | .size = 0, | 
|  | .read = ipr_read_trace, | 
|  | }; | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * ipr_show_fw_version - Show the firmware version | 
|  | * @dev:	class device struct | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | *	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_show_fw_version(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data; | 
|  | unsigned long lock_flags = 0; | 
|  | int len; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | len = snprintf(buf, PAGE_SIZE, "%02X%02X%02X%02X\n", | 
|  | ucode_vpd->major_release, ucode_vpd->card_type, | 
|  | ucode_vpd->minor_release[0], | 
|  | ucode_vpd->minor_release[1]); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_fw_version_attr = { | 
|  | .attr = { | 
|  | .name =		"fw_version", | 
|  | .mode =		S_IRUGO, | 
|  | }, | 
|  | .show = ipr_show_fw_version, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_show_log_level - Show the adapter's error logging level | 
|  | * @dev:	class device struct | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | * 	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_show_log_level(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long lock_flags = 0; | 
|  | int len; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->log_level); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_store_log_level - Change the adapter's error logging level | 
|  | * @dev:	class device struct | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | * 	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_store_log_level(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | ioa_cfg->log_level = simple_strtoul(buf, NULL, 10); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_log_level_attr = { | 
|  | .attr = { | 
|  | .name =		"log_level", | 
|  | .mode =		S_IRUGO | S_IWUSR, | 
|  | }, | 
|  | .show = ipr_show_log_level, | 
|  | .store = ipr_store_log_level | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_store_diagnostics - IOA Diagnostics interface | 
|  | * @dev:	device struct | 
|  | * @buf:	buffer | 
|  | * @count:	buffer size | 
|  | * | 
|  | * This function will reset the adapter and wait a reasonable | 
|  | * amount of time for any errors that the adapter might log. | 
|  | * | 
|  | * Return value: | 
|  | * 	count on success / other on failure | 
|  | **/ | 
|  | static ssize_t ipr_store_diagnostics(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long lock_flags = 0; | 
|  | int rc = count; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | while (ioa_cfg->in_reset_reload) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | } | 
|  |  | 
|  | ioa_cfg->errors_logged = 0; | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); | 
|  |  | 
|  | if (ioa_cfg->in_reset_reload) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  |  | 
|  | /* Wait for a second for any errors to be logged */ | 
|  | msleep(1000); | 
|  | } else { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | if (ioa_cfg->in_reset_reload || ioa_cfg->errors_logged) | 
|  | rc = -EIO; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_diagnostics_attr = { | 
|  | .attr = { | 
|  | .name =		"run_diagnostics", | 
|  | .mode =		S_IWUSR, | 
|  | }, | 
|  | .store = ipr_store_diagnostics | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_show_adapter_state - Show the adapter's state | 
|  | * @class_dev:	device struct | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | * 	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_show_adapter_state(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long lock_flags = 0; | 
|  | int len; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) | 
|  | len = snprintf(buf, PAGE_SIZE, "offline\n"); | 
|  | else | 
|  | len = snprintf(buf, PAGE_SIZE, "online\n"); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_store_adapter_state - Change adapter state | 
|  | * @dev:	device struct | 
|  | * @buf:	buffer | 
|  | * @count:	buffer size | 
|  | * | 
|  | * This function will change the adapter's state. | 
|  | * | 
|  | * Return value: | 
|  | * 	count on success / other on failure | 
|  | **/ | 
|  | static ssize_t ipr_store_adapter_state(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long lock_flags; | 
|  | int result = count, i; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead && | 
|  | !strncmp(buf, "online", 6)) { | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | spin_lock(&ioa_cfg->hrrq[i]._lock); | 
|  | ioa_cfg->hrrq[i].ioa_is_dead = 0; | 
|  | spin_unlock(&ioa_cfg->hrrq[i]._lock); | 
|  | } | 
|  | wmb(); | 
|  | ioa_cfg->reset_retries = 0; | 
|  | ioa_cfg->in_ioa_bringdown = 0; | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  | } | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_ioa_state_attr = { | 
|  | .attr = { | 
|  | .name =		"online_state", | 
|  | .mode =		S_IRUGO | S_IWUSR, | 
|  | }, | 
|  | .show = ipr_show_adapter_state, | 
|  | .store = ipr_store_adapter_state | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_store_reset_adapter - Reset the adapter | 
|  | * @dev:	device struct | 
|  | * @buf:	buffer | 
|  | * @count:	buffer size | 
|  | * | 
|  | * This function will reset the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	count on success / other on failure | 
|  | **/ | 
|  | static ssize_t ipr_store_reset_adapter(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long lock_flags; | 
|  | int result = count; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | if (!ioa_cfg->in_reset_reload) | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_ioa_reset_attr = { | 
|  | .attr = { | 
|  | .name =		"reset_host", | 
|  | .mode =		S_IWUSR, | 
|  | }, | 
|  | .store = ipr_store_reset_adapter | 
|  | }; | 
|  |  | 
|  | static int ipr_iopoll(struct blk_iopoll *iop, int budget); | 
|  | /** | 
|  | * ipr_show_iopoll_weight - Show ipr polling mode | 
|  | * @dev:	class device struct | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | *	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_show_iopoll_weight(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long lock_flags = 0; | 
|  | int len; | 
|  |  | 
|  | spin_lock_irqsave(shost->host_lock, lock_flags); | 
|  | len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->iopoll_weight); | 
|  | spin_unlock_irqrestore(shost->host_lock, lock_flags); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_store_iopoll_weight - Change the adapter's polling mode | 
|  | * @dev:	class device struct | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | *	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_store_iopoll_weight(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long user_iopoll_weight; | 
|  | unsigned long lock_flags = 0; | 
|  | int i; | 
|  |  | 
|  | if (!ioa_cfg->sis64) { | 
|  | dev_info(&ioa_cfg->pdev->dev, "blk-iopoll not supported on this adapter\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | if (kstrtoul(buf, 10, &user_iopoll_weight)) | 
|  | return -EINVAL; | 
|  |  | 
|  | if (user_iopoll_weight > 256) { | 
|  | dev_info(&ioa_cfg->pdev->dev, "Invalid blk-iopoll weight. It must be less than 256\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | if (user_iopoll_weight == ioa_cfg->iopoll_weight) { | 
|  | dev_info(&ioa_cfg->pdev->dev, "Current blk-iopoll weight has the same weight\n"); | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->iopoll_weight && ioa_cfg->sis64 && ioa_cfg->nvectors > 1) { | 
|  | for (i = 1; i < ioa_cfg->hrrq_num; i++) | 
|  | blk_iopoll_disable(&ioa_cfg->hrrq[i].iopoll); | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(shost->host_lock, lock_flags); | 
|  | ioa_cfg->iopoll_weight = user_iopoll_weight; | 
|  | if (ioa_cfg->iopoll_weight && ioa_cfg->sis64 && ioa_cfg->nvectors > 1) { | 
|  | for (i = 1; i < ioa_cfg->hrrq_num; i++) { | 
|  | blk_iopoll_init(&ioa_cfg->hrrq[i].iopoll, | 
|  | ioa_cfg->iopoll_weight, ipr_iopoll); | 
|  | blk_iopoll_enable(&ioa_cfg->hrrq[i].iopoll); | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(shost->host_lock, lock_flags); | 
|  |  | 
|  | return strlen(buf); | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_iopoll_weight_attr = { | 
|  | .attr = { | 
|  | .name =		"iopoll_weight", | 
|  | .mode =		S_IRUGO | S_IWUSR, | 
|  | }, | 
|  | .show = ipr_show_iopoll_weight, | 
|  | .store = ipr_store_iopoll_weight | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_alloc_ucode_buffer - Allocates a microcode download buffer | 
|  | * @buf_len:		buffer length | 
|  | * | 
|  | * Allocates a DMA'able buffer in chunks and assembles a scatter/gather | 
|  | * list to use for microcode download | 
|  | * | 
|  | * Return value: | 
|  | * 	pointer to sglist / NULL on failure | 
|  | **/ | 
|  | static struct ipr_sglist *ipr_alloc_ucode_buffer(int buf_len) | 
|  | { | 
|  | int sg_size, order, bsize_elem, num_elem, i, j; | 
|  | struct ipr_sglist *sglist; | 
|  | struct scatterlist *scatterlist; | 
|  | struct page *page; | 
|  |  | 
|  | /* Get the minimum size per scatter/gather element */ | 
|  | sg_size = buf_len / (IPR_MAX_SGLIST - 1); | 
|  |  | 
|  | /* Get the actual size per element */ | 
|  | order = get_order(sg_size); | 
|  |  | 
|  | /* Determine the actual number of bytes per element */ | 
|  | bsize_elem = PAGE_SIZE * (1 << order); | 
|  |  | 
|  | /* Determine the actual number of sg entries needed */ | 
|  | if (buf_len % bsize_elem) | 
|  | num_elem = (buf_len / bsize_elem) + 1; | 
|  | else | 
|  | num_elem = buf_len / bsize_elem; | 
|  |  | 
|  | /* Allocate a scatter/gather list for the DMA */ | 
|  | sglist = kzalloc(sizeof(struct ipr_sglist) + | 
|  | (sizeof(struct scatterlist) * (num_elem - 1)), | 
|  | GFP_KERNEL); | 
|  |  | 
|  | if (sglist == NULL) { | 
|  | ipr_trace; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | scatterlist = sglist->scatterlist; | 
|  | sg_init_table(scatterlist, num_elem); | 
|  |  | 
|  | sglist->order = order; | 
|  | sglist->num_sg = num_elem; | 
|  |  | 
|  | /* Allocate a bunch of sg elements */ | 
|  | for (i = 0; i < num_elem; i++) { | 
|  | page = alloc_pages(GFP_KERNEL, order); | 
|  | if (!page) { | 
|  | ipr_trace; | 
|  |  | 
|  | /* Free up what we already allocated */ | 
|  | for (j = i - 1; j >= 0; j--) | 
|  | __free_pages(sg_page(&scatterlist[j]), order); | 
|  | kfree(sglist); | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | sg_set_page(&scatterlist[i], page, 0, 0); | 
|  | } | 
|  |  | 
|  | return sglist; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_free_ucode_buffer - Frees a microcode download buffer | 
|  | * @p_dnld:		scatter/gather list pointer | 
|  | * | 
|  | * Free a DMA'able ucode download buffer previously allocated with | 
|  | * ipr_alloc_ucode_buffer | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_free_ucode_buffer(struct ipr_sglist *sglist) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < sglist->num_sg; i++) | 
|  | __free_pages(sg_page(&sglist->scatterlist[i]), sglist->order); | 
|  |  | 
|  | kfree(sglist); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_copy_ucode_buffer - Copy user buffer to kernel buffer | 
|  | * @sglist:		scatter/gather list pointer | 
|  | * @buffer:		buffer pointer | 
|  | * @len:		buffer length | 
|  | * | 
|  | * Copy a microcode image from a user buffer into a buffer allocated by | 
|  | * ipr_alloc_ucode_buffer | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / other on failure | 
|  | **/ | 
|  | static int ipr_copy_ucode_buffer(struct ipr_sglist *sglist, | 
|  | u8 *buffer, u32 len) | 
|  | { | 
|  | int bsize_elem, i, result = 0; | 
|  | struct scatterlist *scatterlist; | 
|  | void *kaddr; | 
|  |  | 
|  | /* Determine the actual number of bytes per element */ | 
|  | bsize_elem = PAGE_SIZE * (1 << sglist->order); | 
|  |  | 
|  | scatterlist = sglist->scatterlist; | 
|  |  | 
|  | for (i = 0; i < (len / bsize_elem); i++, buffer += bsize_elem) { | 
|  | struct page *page = sg_page(&scatterlist[i]); | 
|  |  | 
|  | kaddr = kmap(page); | 
|  | memcpy(kaddr, buffer, bsize_elem); | 
|  | kunmap(page); | 
|  |  | 
|  | scatterlist[i].length = bsize_elem; | 
|  |  | 
|  | if (result != 0) { | 
|  | ipr_trace; | 
|  | return result; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (len % bsize_elem) { | 
|  | struct page *page = sg_page(&scatterlist[i]); | 
|  |  | 
|  | kaddr = kmap(page); | 
|  | memcpy(kaddr, buffer, len % bsize_elem); | 
|  | kunmap(page); | 
|  |  | 
|  | scatterlist[i].length = len % bsize_elem; | 
|  | } | 
|  |  | 
|  | sglist->buffer_len = len; | 
|  | return result; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_build_ucode_ioadl64 - Build a microcode download IOADL | 
|  | * @ipr_cmd:		ipr command struct | 
|  | * @sglist:		scatter/gather list | 
|  | * | 
|  | * Builds a microcode download IOA data list (IOADL). | 
|  | * | 
|  | **/ | 
|  | static void ipr_build_ucode_ioadl64(struct ipr_cmnd *ipr_cmd, | 
|  | struct ipr_sglist *sglist) | 
|  | { | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64; | 
|  | struct scatterlist *scatterlist = sglist->scatterlist; | 
|  | int i; | 
|  |  | 
|  | ipr_cmd->dma_use_sg = sglist->num_dma_sg; | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | 
|  | ioarcb->data_transfer_length = cpu_to_be32(sglist->buffer_len); | 
|  |  | 
|  | ioarcb->ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl64_desc) * ipr_cmd->dma_use_sg); | 
|  | for (i = 0; i < ipr_cmd->dma_use_sg; i++) { | 
|  | ioadl64[i].flags = cpu_to_be32(IPR_IOADL_FLAGS_WRITE); | 
|  | ioadl64[i].data_len = cpu_to_be32(sg_dma_len(&scatterlist[i])); | 
|  | ioadl64[i].address = cpu_to_be64(sg_dma_address(&scatterlist[i])); | 
|  | } | 
|  |  | 
|  | ioadl64[i-1].flags |= cpu_to_be32(IPR_IOADL_FLAGS_LAST); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_build_ucode_ioadl - Build a microcode download IOADL | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @sglist:		scatter/gather list | 
|  | * | 
|  | * Builds a microcode download IOA data list (IOADL). | 
|  | * | 
|  | **/ | 
|  | static void ipr_build_ucode_ioadl(struct ipr_cmnd *ipr_cmd, | 
|  | struct ipr_sglist *sglist) | 
|  | { | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl; | 
|  | struct scatterlist *scatterlist = sglist->scatterlist; | 
|  | int i; | 
|  |  | 
|  | ipr_cmd->dma_use_sg = sglist->num_dma_sg; | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | 
|  | ioarcb->data_transfer_length = cpu_to_be32(sglist->buffer_len); | 
|  |  | 
|  | ioarcb->ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); | 
|  |  | 
|  | for (i = 0; i < ipr_cmd->dma_use_sg; i++) { | 
|  | ioadl[i].flags_and_data_len = | 
|  | cpu_to_be32(IPR_IOADL_FLAGS_WRITE | sg_dma_len(&scatterlist[i])); | 
|  | ioadl[i].address = | 
|  | cpu_to_be32(sg_dma_address(&scatterlist[i])); | 
|  | } | 
|  |  | 
|  | ioadl[i-1].flags_and_data_len |= | 
|  | cpu_to_be32(IPR_IOADL_FLAGS_LAST); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_update_ioa_ucode - Update IOA's microcode | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @sglist:		scatter/gather list | 
|  | * | 
|  | * Initiate an adapter reset to update the IOA's microcode | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / -EIO on failure | 
|  | **/ | 
|  | static int ipr_update_ioa_ucode(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_sglist *sglist) | 
|  | { | 
|  | unsigned long lock_flags; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | while (ioa_cfg->in_reset_reload) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->ucode_sglist) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Microcode download already in progress\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | sglist->num_dma_sg = pci_map_sg(ioa_cfg->pdev, sglist->scatterlist, | 
|  | sglist->num_sg, DMA_TO_DEVICE); | 
|  |  | 
|  | if (!sglist->num_dma_sg) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Failed to map microcode download buffer!\n"); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | ioa_cfg->ucode_sglist = sglist; | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NORMAL); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | ioa_cfg->ucode_sglist = NULL; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_store_update_fw - Update the firmware on the adapter | 
|  | * @class_dev:	device struct | 
|  | * @buf:	buffer | 
|  | * @count:	buffer size | 
|  | * | 
|  | * This function will update the firmware on the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	count on success / other on failure | 
|  | **/ | 
|  | static ssize_t ipr_store_update_fw(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t count) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | struct ipr_ucode_image_header *image_hdr; | 
|  | const struct firmware *fw_entry; | 
|  | struct ipr_sglist *sglist; | 
|  | char fname[100]; | 
|  | char *src; | 
|  | int len, result, dnld_size; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | len = snprintf(fname, 99, "%s", buf); | 
|  | fname[len-1] = '\0'; | 
|  |  | 
|  | if (request_firmware(&fw_entry, fname, &ioa_cfg->pdev->dev)) { | 
|  | dev_err(&ioa_cfg->pdev->dev, "Firmware file %s not found\n", fname); | 
|  | return -EIO; | 
|  | } | 
|  |  | 
|  | image_hdr = (struct ipr_ucode_image_header *)fw_entry->data; | 
|  |  | 
|  | src = (u8 *)image_hdr + be32_to_cpu(image_hdr->header_length); | 
|  | dnld_size = fw_entry->size - be32_to_cpu(image_hdr->header_length); | 
|  | sglist = ipr_alloc_ucode_buffer(dnld_size); | 
|  |  | 
|  | if (!sglist) { | 
|  | dev_err(&ioa_cfg->pdev->dev, "Microcode buffer allocation failed\n"); | 
|  | release_firmware(fw_entry); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | result = ipr_copy_ucode_buffer(sglist, src, dnld_size); | 
|  |  | 
|  | if (result) { | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Microcode buffer copy to DMA buffer failed\n"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ipr_info("Updating microcode, please be patient.  This may take up to 30 minutes.\n"); | 
|  |  | 
|  | result = ipr_update_ioa_ucode(ioa_cfg, sglist); | 
|  |  | 
|  | if (!result) | 
|  | result = count; | 
|  | out: | 
|  | ipr_free_ucode_buffer(sglist); | 
|  | release_firmware(fw_entry); | 
|  | return result; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_update_fw_attr = { | 
|  | .attr = { | 
|  | .name =		"update_fw", | 
|  | .mode =		S_IWUSR, | 
|  | }, | 
|  | .store = ipr_store_update_fw | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_show_fw_type - Show the adapter's firmware type. | 
|  | * @dev:	class device struct | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | *	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_show_fw_type(struct device *dev, | 
|  | struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct Scsi_Host *shost = class_to_shost(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | unsigned long lock_flags = 0; | 
|  | int len; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | len = snprintf(buf, PAGE_SIZE, "%d\n", ioa_cfg->sis64); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_ioa_fw_type_attr = { | 
|  | .attr = { | 
|  | .name =		"fw_type", | 
|  | .mode =		S_IRUGO, | 
|  | }, | 
|  | .show = ipr_show_fw_type | 
|  | }; | 
|  |  | 
|  | static struct device_attribute *ipr_ioa_attrs[] = { | 
|  | &ipr_fw_version_attr, | 
|  | &ipr_log_level_attr, | 
|  | &ipr_diagnostics_attr, | 
|  | &ipr_ioa_state_attr, | 
|  | &ipr_ioa_reset_attr, | 
|  | &ipr_update_fw_attr, | 
|  | &ipr_ioa_fw_type_attr, | 
|  | &ipr_iopoll_weight_attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_SCSI_IPR_DUMP | 
|  | /** | 
|  | * ipr_read_dump - Dump the adapter | 
|  | * @filp:		open sysfs file | 
|  | * @kobj:		kobject struct | 
|  | * @bin_attr:		bin_attribute struct | 
|  | * @buf:		buffer | 
|  | * @off:		offset | 
|  | * @count:		buffer size | 
|  | * | 
|  | * Return value: | 
|  | *	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_read_dump(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *bin_attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct device *cdev = container_of(kobj, struct device, kobj); | 
|  | struct Scsi_Host *shost = class_to_shost(cdev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | struct ipr_dump *dump; | 
|  | unsigned long lock_flags = 0; | 
|  | char *src; | 
|  | int len, sdt_end; | 
|  | size_t rc = count; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | dump = ioa_cfg->dump; | 
|  |  | 
|  | if (ioa_cfg->sdt_state != DUMP_OBTAINED || !dump) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return 0; | 
|  | } | 
|  | kref_get(&dump->kref); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (off > dump->driver_dump.hdr.len) { | 
|  | kref_put(&dump->kref, ipr_release_dump); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (off + count > dump->driver_dump.hdr.len) { | 
|  | count = dump->driver_dump.hdr.len - off; | 
|  | rc = count; | 
|  | } | 
|  |  | 
|  | if (count && off < sizeof(dump->driver_dump)) { | 
|  | if (off + count > sizeof(dump->driver_dump)) | 
|  | len = sizeof(dump->driver_dump) - off; | 
|  | else | 
|  | len = count; | 
|  | src = (u8 *)&dump->driver_dump + off; | 
|  | memcpy(buf, src, len); | 
|  | buf += len; | 
|  | off += len; | 
|  | count -= len; | 
|  | } | 
|  |  | 
|  | off -= sizeof(dump->driver_dump); | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | sdt_end = offsetof(struct ipr_ioa_dump, sdt.entry) + | 
|  | (be32_to_cpu(dump->ioa_dump.sdt.hdr.num_entries_used) * | 
|  | sizeof(struct ipr_sdt_entry)); | 
|  | else | 
|  | sdt_end = offsetof(struct ipr_ioa_dump, sdt.entry) + | 
|  | (IPR_FMT2_NUM_SDT_ENTRIES * sizeof(struct ipr_sdt_entry)); | 
|  |  | 
|  | if (count && off < sdt_end) { | 
|  | if (off + count > sdt_end) | 
|  | len = sdt_end - off; | 
|  | else | 
|  | len = count; | 
|  | src = (u8 *)&dump->ioa_dump + off; | 
|  | memcpy(buf, src, len); | 
|  | buf += len; | 
|  | off += len; | 
|  | count -= len; | 
|  | } | 
|  |  | 
|  | off -= sdt_end; | 
|  |  | 
|  | while (count) { | 
|  | if ((off & PAGE_MASK) != ((off + count) & PAGE_MASK)) | 
|  | len = PAGE_ALIGN(off) - off; | 
|  | else | 
|  | len = count; | 
|  | src = (u8 *)dump->ioa_dump.ioa_data[(off & PAGE_MASK) >> PAGE_SHIFT]; | 
|  | src += off & ~PAGE_MASK; | 
|  | memcpy(buf, src, len); | 
|  | buf += len; | 
|  | off += len; | 
|  | count -= len; | 
|  | } | 
|  |  | 
|  | kref_put(&dump->kref, ipr_release_dump); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_alloc_dump - Prepare for adapter dump | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | *	0 on success / other on failure | 
|  | **/ | 
|  | static int ipr_alloc_dump(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct ipr_dump *dump; | 
|  | __be32 **ioa_data; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | dump = kzalloc(sizeof(struct ipr_dump), GFP_KERNEL); | 
|  |  | 
|  | if (!dump) { | 
|  | ipr_err("Dump memory allocation failed\n"); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | ioa_data = vmalloc(IPR_FMT3_MAX_NUM_DUMP_PAGES * sizeof(__be32 *)); | 
|  | else | 
|  | ioa_data = vmalloc(IPR_FMT2_MAX_NUM_DUMP_PAGES * sizeof(__be32 *)); | 
|  |  | 
|  | if (!ioa_data) { | 
|  | ipr_err("Dump memory allocation failed\n"); | 
|  | kfree(dump); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | dump->ioa_dump.ioa_data = ioa_data; | 
|  |  | 
|  | kref_init(&dump->kref); | 
|  | dump->ioa_cfg = ioa_cfg; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (INACTIVE != ioa_cfg->sdt_state) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | vfree(dump->ioa_dump.ioa_data); | 
|  | kfree(dump); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ioa_cfg->dump = dump; | 
|  | ioa_cfg->sdt_state = WAIT_FOR_DUMP; | 
|  | if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead && !ioa_cfg->dump_taken) { | 
|  | ioa_cfg->dump_taken = 1; | 
|  | schedule_work(&ioa_cfg->work_q); | 
|  | } | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_free_dump - Free adapter dump memory | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | *	0 on success / other on failure | 
|  | **/ | 
|  | static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct ipr_dump *dump; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | ENTER; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | dump = ioa_cfg->dump; | 
|  | if (!dump) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ioa_cfg->dump = NULL; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | kref_put(&dump->kref, ipr_release_dump); | 
|  |  | 
|  | LEAVE; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_write_dump - Setup dump state of adapter | 
|  | * @filp:		open sysfs file | 
|  | * @kobj:		kobject struct | 
|  | * @bin_attr:		bin_attribute struct | 
|  | * @buf:		buffer | 
|  | * @off:		offset | 
|  | * @count:		buffer size | 
|  | * | 
|  | * Return value: | 
|  | *	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_write_dump(struct file *filp, struct kobject *kobj, | 
|  | struct bin_attribute *bin_attr, | 
|  | char *buf, loff_t off, size_t count) | 
|  | { | 
|  | struct device *cdev = container_of(kobj, struct device, kobj); | 
|  | struct Scsi_Host *shost = class_to_shost(cdev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  | int rc; | 
|  |  | 
|  | if (!capable(CAP_SYS_ADMIN)) | 
|  | return -EACCES; | 
|  |  | 
|  | if (buf[0] == '1') | 
|  | rc = ipr_alloc_dump(ioa_cfg); | 
|  | else if (buf[0] == '0') | 
|  | rc = ipr_free_dump(ioa_cfg); | 
|  | else | 
|  | return -EINVAL; | 
|  |  | 
|  | if (rc) | 
|  | return rc; | 
|  | else | 
|  | return count; | 
|  | } | 
|  |  | 
|  | static struct bin_attribute ipr_dump_attr = { | 
|  | .attr =	{ | 
|  | .name = "dump", | 
|  | .mode = S_IRUSR | S_IWUSR, | 
|  | }, | 
|  | .size = 0, | 
|  | .read = ipr_read_dump, | 
|  | .write = ipr_write_dump | 
|  | }; | 
|  | #else | 
|  | static int ipr_free_dump(struct ipr_ioa_cfg *ioa_cfg) { return 0; }; | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * ipr_change_queue_depth - Change the device's queue depth | 
|  | * @sdev:	scsi device struct | 
|  | * @qdepth:	depth to set | 
|  | * @reason:	calling context | 
|  | * | 
|  | * Return value: | 
|  | * 	actual depth set | 
|  | **/ | 
|  | static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth, | 
|  | int reason) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | if (reason != SCSI_QDEPTH_DEFAULT) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | res = (struct ipr_resource_entry *)sdev->hostdata; | 
|  |  | 
|  | if (res && ipr_is_gata(res) && qdepth > IPR_MAX_CMD_PER_ATA_LUN) | 
|  | qdepth = IPR_MAX_CMD_PER_ATA_LUN; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth); | 
|  | return sdev->queue_depth; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_change_queue_type - Change the device's queue type | 
|  | * @dsev:		scsi device struct | 
|  | * @tag_type:	type of tags to use | 
|  | * | 
|  | * Return value: | 
|  | * 	actual queue type set | 
|  | **/ | 
|  | static int ipr_change_queue_type(struct scsi_device *sdev, int tag_type) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | res = (struct ipr_resource_entry *)sdev->hostdata; | 
|  |  | 
|  | if (res) { | 
|  | if (ipr_is_gscsi(res) && sdev->tagged_supported) { | 
|  | /* | 
|  | * We don't bother quiescing the device here since the | 
|  | * adapter firmware does it for us. | 
|  | */ | 
|  | scsi_set_tag_type(sdev, tag_type); | 
|  |  | 
|  | if (tag_type) | 
|  | scsi_activate_tcq(sdev, sdev->queue_depth); | 
|  | else | 
|  | scsi_deactivate_tcq(sdev, sdev->queue_depth); | 
|  | } else | 
|  | tag_type = 0; | 
|  | } else | 
|  | tag_type = 0; | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return tag_type; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_show_adapter_handle - Show the adapter's resource handle for this device | 
|  | * @dev:	device struct | 
|  | * @attr:	device attribute structure | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | * 	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_show_adapter_handle(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct scsi_device *sdev = to_scsi_device(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  | unsigned long lock_flags = 0; | 
|  | ssize_t len = -ENXIO; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | res = (struct ipr_resource_entry *)sdev->hostdata; | 
|  | if (res) | 
|  | len = snprintf(buf, PAGE_SIZE, "%08X\n", res->res_handle); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_adapter_handle_attr = { | 
|  | .attr = { | 
|  | .name = 	"adapter_handle", | 
|  | .mode =		S_IRUSR, | 
|  | }, | 
|  | .show = ipr_show_adapter_handle | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_show_resource_path - Show the resource path or the resource address for | 
|  | *			    this device. | 
|  | * @dev:	device struct | 
|  | * @attr:	device attribute structure | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | * 	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_show_resource_path(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct scsi_device *sdev = to_scsi_device(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  | unsigned long lock_flags = 0; | 
|  | ssize_t len = -ENXIO; | 
|  | char buffer[IPR_MAX_RES_PATH_LENGTH]; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | res = (struct ipr_resource_entry *)sdev->hostdata; | 
|  | if (res && ioa_cfg->sis64) | 
|  | len = snprintf(buf, PAGE_SIZE, "%s\n", | 
|  | __ipr_format_res_path(res->res_path, buffer, | 
|  | sizeof(buffer))); | 
|  | else if (res) | 
|  | len = snprintf(buf, PAGE_SIZE, "%d:%d:%d:%d\n", ioa_cfg->host->host_no, | 
|  | res->bus, res->target, res->lun); | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_resource_path_attr = { | 
|  | .attr = { | 
|  | .name = 	"resource_path", | 
|  | .mode =		S_IRUGO, | 
|  | }, | 
|  | .show = ipr_show_resource_path | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_show_device_id - Show the device_id for this device. | 
|  | * @dev:	device struct | 
|  | * @attr:	device attribute structure | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | *	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_show_device_id(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct scsi_device *sdev = to_scsi_device(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  | unsigned long lock_flags = 0; | 
|  | ssize_t len = -ENXIO; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | res = (struct ipr_resource_entry *)sdev->hostdata; | 
|  | if (res && ioa_cfg->sis64) | 
|  | len = snprintf(buf, PAGE_SIZE, "0x%llx\n", res->dev_id); | 
|  | else if (res) | 
|  | len = snprintf(buf, PAGE_SIZE, "0x%llx\n", res->lun_wwn); | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_device_id_attr = { | 
|  | .attr = { | 
|  | .name =		"device_id", | 
|  | .mode =		S_IRUGO, | 
|  | }, | 
|  | .show = ipr_show_device_id | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_show_resource_type - Show the resource type for this device. | 
|  | * @dev:	device struct | 
|  | * @attr:	device attribute structure | 
|  | * @buf:	buffer | 
|  | * | 
|  | * Return value: | 
|  | *	number of bytes printed to buffer | 
|  | **/ | 
|  | static ssize_t ipr_show_resource_type(struct device *dev, struct device_attribute *attr, char *buf) | 
|  | { | 
|  | struct scsi_device *sdev = to_scsi_device(dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  | unsigned long lock_flags = 0; | 
|  | ssize_t len = -ENXIO; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | res = (struct ipr_resource_entry *)sdev->hostdata; | 
|  |  | 
|  | if (res) | 
|  | len = snprintf(buf, PAGE_SIZE, "%x\n", res->type); | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static struct device_attribute ipr_resource_type_attr = { | 
|  | .attr = { | 
|  | .name =		"resource_type", | 
|  | .mode =		S_IRUGO, | 
|  | }, | 
|  | .show = ipr_show_resource_type | 
|  | }; | 
|  |  | 
|  | static struct device_attribute *ipr_dev_attrs[] = { | 
|  | &ipr_adapter_handle_attr, | 
|  | &ipr_resource_path_attr, | 
|  | &ipr_device_id_attr, | 
|  | &ipr_resource_type_attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_biosparam - Return the HSC mapping | 
|  | * @sdev:			scsi device struct | 
|  | * @block_device:	block device pointer | 
|  | * @capacity:		capacity of the device | 
|  | * @parm:			Array containing returned HSC values. | 
|  | * | 
|  | * This function generates the HSC parms that fdisk uses. | 
|  | * We want to make sure we return something that places partitions | 
|  | * on 4k boundaries for best performance with the IOA. | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success | 
|  | **/ | 
|  | static int ipr_biosparam(struct scsi_device *sdev, | 
|  | struct block_device *block_device, | 
|  | sector_t capacity, int *parm) | 
|  | { | 
|  | int heads, sectors; | 
|  | sector_t cylinders; | 
|  |  | 
|  | heads = 128; | 
|  | sectors = 32; | 
|  |  | 
|  | cylinders = capacity; | 
|  | sector_div(cylinders, (128 * 32)); | 
|  |  | 
|  | /* return result */ | 
|  | parm[0] = heads; | 
|  | parm[1] = sectors; | 
|  | parm[2] = cylinders; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_find_starget - Find target based on bus/target. | 
|  | * @starget:	scsi target struct | 
|  | * | 
|  | * Return value: | 
|  | * 	resource entry pointer if found / NULL if not found | 
|  | **/ | 
|  | static struct ipr_resource_entry *ipr_find_starget(struct scsi_target *starget) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  |  | 
|  | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | 
|  | if ((res->bus == starget->channel) && | 
|  | (res->target == starget->id)) { | 
|  | return res; | 
|  | } | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | static struct ata_port_info sata_port_info; | 
|  |  | 
|  | /** | 
|  | * ipr_target_alloc - Prepare for commands to a SCSI target | 
|  | * @starget:	scsi target struct | 
|  | * | 
|  | * If the device is a SATA device, this function allocates an | 
|  | * ATA port with libata, else it does nothing. | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / non-0 on failure | 
|  | **/ | 
|  | static int ipr_target_alloc(struct scsi_target *starget) | 
|  | { | 
|  | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata; | 
|  | struct ipr_sata_port *sata_port; | 
|  | struct ata_port *ap; | 
|  | struct ipr_resource_entry *res; | 
|  | unsigned long lock_flags; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | res = ipr_find_starget(starget); | 
|  | starget->hostdata = NULL; | 
|  |  | 
|  | if (res && ipr_is_gata(res)) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | sata_port = kzalloc(sizeof(*sata_port), GFP_KERNEL); | 
|  | if (!sata_port) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ap = ata_sas_port_alloc(&ioa_cfg->ata_host, &sata_port_info, shost); | 
|  | if (ap) { | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | sata_port->ioa_cfg = ioa_cfg; | 
|  | sata_port->ap = ap; | 
|  | sata_port->res = res; | 
|  |  | 
|  | res->sata_port = sata_port; | 
|  | ap->private_data = sata_port; | 
|  | starget->hostdata = sata_port; | 
|  | } else { | 
|  | kfree(sata_port); | 
|  | return -ENOMEM; | 
|  | } | 
|  | } | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_target_destroy - Destroy a SCSI target | 
|  | * @starget:	scsi target struct | 
|  | * | 
|  | * If the device was a SATA device, this function frees the libata | 
|  | * ATA port, else it does nothing. | 
|  | * | 
|  | **/ | 
|  | static void ipr_target_destroy(struct scsi_target *starget) | 
|  | { | 
|  | struct ipr_sata_port *sata_port = starget->hostdata; | 
|  | struct Scsi_Host *shost = dev_to_shost(&starget->dev); | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) shost->hostdata; | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | if (!ipr_find_starget(starget)) { | 
|  | if (starget->channel == IPR_ARRAY_VIRTUAL_BUS) | 
|  | clear_bit(starget->id, ioa_cfg->array_ids); | 
|  | else if (starget->channel == IPR_VSET_VIRTUAL_BUS) | 
|  | clear_bit(starget->id, ioa_cfg->vset_ids); | 
|  | else if (starget->channel == 0) | 
|  | clear_bit(starget->id, ioa_cfg->target_ids); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (sata_port) { | 
|  | starget->hostdata = NULL; | 
|  | ata_sas_port_destroy(sata_port->ap); | 
|  | kfree(sata_port); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_find_sdev - Find device based on bus/target/lun. | 
|  | * @sdev:	scsi device struct | 
|  | * | 
|  | * Return value: | 
|  | * 	resource entry pointer if found / NULL if not found | 
|  | **/ | 
|  | static struct ipr_resource_entry *ipr_find_sdev(struct scsi_device *sdev) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  |  | 
|  | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | 
|  | if ((res->bus == sdev->channel) && | 
|  | (res->target == sdev->id) && | 
|  | (res->lun == sdev->lun)) | 
|  | return res; | 
|  | } | 
|  |  | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_slave_destroy - Unconfigure a SCSI device | 
|  | * @sdev:	scsi device struct | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_slave_destroy(struct scsi_device *sdev) | 
|  | { | 
|  | struct ipr_resource_entry *res; | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | res = (struct ipr_resource_entry *) sdev->hostdata; | 
|  | if (res) { | 
|  | if (res->sata_port) | 
|  | res->sata_port->ap->link.device[0].class = ATA_DEV_NONE; | 
|  | sdev->hostdata = NULL; | 
|  | res->sdev = NULL; | 
|  | res->sata_port = NULL; | 
|  | } | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_slave_configure - Configure a SCSI device | 
|  | * @sdev:	scsi device struct | 
|  | * | 
|  | * This function configures the specified scsi device. | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success | 
|  | **/ | 
|  | static int ipr_slave_configure(struct scsi_device *sdev) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  | struct ata_port *ap = NULL; | 
|  | unsigned long lock_flags = 0; | 
|  | char buffer[IPR_MAX_RES_PATH_LENGTH]; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | res = sdev->hostdata; | 
|  | if (res) { | 
|  | if (ipr_is_af_dasd_device(res)) | 
|  | sdev->type = TYPE_RAID; | 
|  | if (ipr_is_af_dasd_device(res) || ipr_is_ioa_resource(res)) { | 
|  | sdev->scsi_level = 4; | 
|  | sdev->no_uld_attach = 1; | 
|  | } | 
|  | if (ipr_is_vset_device(res)) { | 
|  | blk_queue_rq_timeout(sdev->request_queue, | 
|  | IPR_VSET_RW_TIMEOUT); | 
|  | blk_queue_max_hw_sectors(sdev->request_queue, IPR_VSET_MAX_SECTORS); | 
|  | } | 
|  | if (ipr_is_gata(res) && res->sata_port) | 
|  | ap = res->sata_port->ap; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (ap) { | 
|  | scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN); | 
|  | ata_sas_slave_configure(sdev, ap); | 
|  | } else | 
|  | scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun); | 
|  | if (ioa_cfg->sis64) | 
|  | sdev_printk(KERN_INFO, sdev, "Resource path: %s\n", | 
|  | ipr_format_res_path(ioa_cfg, | 
|  | res->res_path, buffer, sizeof(buffer))); | 
|  | return 0; | 
|  | } | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ata_slave_alloc - Prepare for commands to a SATA device | 
|  | * @sdev:	scsi device struct | 
|  | * | 
|  | * This function initializes an ATA port so that future commands | 
|  | * sent through queuecommand will work. | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success | 
|  | **/ | 
|  | static int ipr_ata_slave_alloc(struct scsi_device *sdev) | 
|  | { | 
|  | struct ipr_sata_port *sata_port = NULL; | 
|  | int rc = -ENXIO; | 
|  |  | 
|  | ENTER; | 
|  | if (sdev->sdev_target) | 
|  | sata_port = sdev->sdev_target->hostdata; | 
|  | if (sata_port) { | 
|  | rc = ata_sas_port_init(sata_port->ap); | 
|  | if (rc == 0) | 
|  | rc = ata_sas_sync_probe(sata_port->ap); | 
|  | } | 
|  |  | 
|  | if (rc) | 
|  | ipr_slave_destroy(sdev); | 
|  |  | 
|  | LEAVE; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_slave_alloc - Prepare for commands to a device. | 
|  | * @sdev:	scsi device struct | 
|  | * | 
|  | * This function saves a pointer to the resource entry | 
|  | * in the scsi device struct if the device exists. We | 
|  | * can then use this pointer in ipr_queuecommand when | 
|  | * handling new commands. | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / -ENXIO if device does not exist | 
|  | **/ | 
|  | static int ipr_slave_alloc(struct scsi_device *sdev) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata; | 
|  | struct ipr_resource_entry *res; | 
|  | unsigned long lock_flags; | 
|  | int rc = -ENXIO; | 
|  |  | 
|  | sdev->hostdata = NULL; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | res = ipr_find_sdev(sdev); | 
|  | if (res) { | 
|  | res->sdev = sdev; | 
|  | res->add_to_ml = 0; | 
|  | res->in_erp = 0; | 
|  | sdev->hostdata = res; | 
|  | if (!ipr_is_naca_model(res)) | 
|  | res->needs_sync_complete = 1; | 
|  | rc = 0; | 
|  | if (ipr_is_gata(res)) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return ipr_ata_slave_alloc(sdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | static int ipr_eh_host_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | unsigned long lock_flags = 0; | 
|  | int rc = SUCCESS; | 
|  |  | 
|  | ENTER; | 
|  | ioa_cfg = (struct ipr_ioa_cfg *) cmd->device->host->hostdata; | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (!ioa_cfg->in_reset_reload && !ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) { | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_ABBREV); | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Adapter being reset as a result of error recovery.\n"); | 
|  |  | 
|  | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | 
|  | ioa_cfg->sdt_state = GET_DUMP; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | /* If we got hit with a host reset while we were already resetting | 
|  | the adapter for some reason, and the reset failed. */ | 
|  | if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) { | 
|  | ipr_trace; | 
|  | rc = FAILED; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | LEAVE; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_device_reset - Reset the device | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @res:		resource entry struct | 
|  | * | 
|  | * This function issues a device reset to the affected device. | 
|  | * If the device is a SCSI device, a LUN reset will be sent | 
|  | * to the device first. If that does not work, a target reset | 
|  | * will be sent. If the device is a SATA device, a PHY reset will | 
|  | * be sent. | 
|  | * | 
|  | * Return value: | 
|  | *	0 on success / non-zero on failure | 
|  | **/ | 
|  | static int ipr_device_reset(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_resource_entry *res) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_ioarcb *ioarcb; | 
|  | struct ipr_cmd_pkt *cmd_pkt; | 
|  | struct ipr_ioarcb_ata_regs *regs; | 
|  | u32 ioasc; | 
|  |  | 
|  | ENTER; | 
|  | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | 
|  | ioarcb = &ipr_cmd->ioarcb; | 
|  | cmd_pkt = &ioarcb->cmd_pkt; | 
|  |  | 
|  | if (ipr_cmd->ioa_cfg->sis64) { | 
|  | regs = &ipr_cmd->i.ata_ioadl.regs; | 
|  | ioarcb->add_cmd_parms_offset = cpu_to_be16(sizeof(*ioarcb)); | 
|  | } else | 
|  | regs = &ioarcb->u.add_data.u.regs; | 
|  |  | 
|  | ioarcb->res_handle = res->res_handle; | 
|  | cmd_pkt->request_type = IPR_RQTYPE_IOACMD; | 
|  | cmd_pkt->cdb[0] = IPR_RESET_DEVICE; | 
|  | if (ipr_is_gata(res)) { | 
|  | cmd_pkt->cdb[2] = IPR_ATA_PHY_RESET; | 
|  | ioarcb->add_cmd_parms_len = cpu_to_be16(sizeof(regs->flags)); | 
|  | regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION; | 
|  | } | 
|  |  | 
|  | ipr_send_blocking_cmd(ipr_cmd, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT); | 
|  | ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | if (ipr_is_gata(res) && res->sata_port && ioasc != IPR_IOASC_IOA_WAS_RESET) { | 
|  | if (ipr_cmd->ioa_cfg->sis64) | 
|  | memcpy(&res->sata_port->ioasa, &ipr_cmd->s.ioasa64.u.gata, | 
|  | sizeof(struct ipr_ioasa_gata)); | 
|  | else | 
|  | memcpy(&res->sata_port->ioasa, &ipr_cmd->s.ioasa.u.gata, | 
|  | sizeof(struct ipr_ioasa_gata)); | 
|  | } | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_IOASC_SENSE_KEY(ioasc) ? -EIO : 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_sata_reset - Reset the SATA port | 
|  | * @link:	SATA link to reset | 
|  | * @classes:	class of the attached device | 
|  | * | 
|  | * This function issues a SATA phy reset to the affected ATA link. | 
|  | * | 
|  | * Return value: | 
|  | *	0 on success / non-zero on failure | 
|  | **/ | 
|  | static int ipr_sata_reset(struct ata_link *link, unsigned int *classes, | 
|  | unsigned long deadline) | 
|  | { | 
|  | struct ipr_sata_port *sata_port = link->ap->private_data; | 
|  | struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg; | 
|  | struct ipr_resource_entry *res; | 
|  | unsigned long lock_flags = 0; | 
|  | int rc = -ENXIO; | 
|  |  | 
|  | ENTER; | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | while (ioa_cfg->in_reset_reload) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | } | 
|  |  | 
|  | res = sata_port->res; | 
|  | if (res) { | 
|  | rc = ipr_device_reset(ioa_cfg, res); | 
|  | *classes = res->ata_class; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | LEAVE; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_eh_dev_reset - Reset the device | 
|  | * @scsi_cmd:	scsi command struct | 
|  | * | 
|  | * This function issues a device reset to the affected device. | 
|  | * A LUN reset will be sent to the device first. If that does | 
|  | * not work, a target reset will be sent. | 
|  | * | 
|  | * Return value: | 
|  | *	SUCCESS / FAILED | 
|  | **/ | 
|  | static int __ipr_eh_dev_reset(struct scsi_cmnd *scsi_cmd) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | struct ipr_resource_entry *res; | 
|  | struct ata_port *ap; | 
|  | int rc = 0; | 
|  | struct ipr_hrr_queue *hrrq; | 
|  |  | 
|  | ENTER; | 
|  | ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata; | 
|  | res = scsi_cmd->device->hostdata; | 
|  |  | 
|  | if (!res) | 
|  | return FAILED; | 
|  |  | 
|  | /* | 
|  | * If we are currently going through reset/reload, return failed. This will force the | 
|  | * mid-layer to call ipr_eh_host_reset, which will then go to sleep and wait for the | 
|  | * reset to complete | 
|  | */ | 
|  | if (ioa_cfg->in_reset_reload) | 
|  | return FAILED; | 
|  | if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) | 
|  | return FAILED; | 
|  |  | 
|  | for_each_hrrq(hrrq, ioa_cfg) { | 
|  | spin_lock(&hrrq->_lock); | 
|  | list_for_each_entry(ipr_cmd, &hrrq->hrrq_pending_q, queue) { | 
|  | if (ipr_cmd->ioarcb.res_handle == res->res_handle) { | 
|  | if (ipr_cmd->scsi_cmd) | 
|  | ipr_cmd->done = ipr_scsi_eh_done; | 
|  | if (ipr_cmd->qc) | 
|  | ipr_cmd->done = ipr_sata_eh_done; | 
|  | if (ipr_cmd->qc && | 
|  | !(ipr_cmd->qc->flags & ATA_QCFLAG_FAILED)) { | 
|  | ipr_cmd->qc->err_mask |= AC_ERR_TIMEOUT; | 
|  | ipr_cmd->qc->flags |= ATA_QCFLAG_FAILED; | 
|  | } | 
|  | } | 
|  | } | 
|  | spin_unlock(&hrrq->_lock); | 
|  | } | 
|  | res->resetting_device = 1; | 
|  | scmd_printk(KERN_ERR, scsi_cmd, "Resetting device\n"); | 
|  |  | 
|  | if (ipr_is_gata(res) && res->sata_port) { | 
|  | ap = res->sata_port->ap; | 
|  | spin_unlock_irq(scsi_cmd->device->host->host_lock); | 
|  | ata_std_error_handler(ap); | 
|  | spin_lock_irq(scsi_cmd->device->host->host_lock); | 
|  |  | 
|  | for_each_hrrq(hrrq, ioa_cfg) { | 
|  | spin_lock(&hrrq->_lock); | 
|  | list_for_each_entry(ipr_cmd, | 
|  | &hrrq->hrrq_pending_q, queue) { | 
|  | if (ipr_cmd->ioarcb.res_handle == | 
|  | res->res_handle) { | 
|  | rc = -EIO; | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&hrrq->_lock); | 
|  | } | 
|  | } else | 
|  | rc = ipr_device_reset(ioa_cfg, res); | 
|  | res->resetting_device = 0; | 
|  | res->reset_occurred = 1; | 
|  |  | 
|  | LEAVE; | 
|  | return rc ? FAILED : SUCCESS; | 
|  | } | 
|  |  | 
|  | static int ipr_eh_dev_reset(struct scsi_cmnd *cmd) | 
|  | { | 
|  | int rc; | 
|  |  | 
|  | spin_lock_irq(cmd->device->host->host_lock); | 
|  | rc = __ipr_eh_dev_reset(cmd); | 
|  | spin_unlock_irq(cmd->device->host->host_lock); | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_bus_reset_done - Op done function for bus reset. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function is the op done function for a bus reset | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_bus_reset_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_resource_entry *res; | 
|  |  | 
|  | ENTER; | 
|  | if (!ioa_cfg->sis64) | 
|  | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | 
|  | if (res->res_handle == ipr_cmd->ioarcb.res_handle) { | 
|  | scsi_report_bus_reset(ioa_cfg->host, res->bus); | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If abort has not completed, indicate the reset has, else call the | 
|  | * abort's done function to wake the sleeping eh thread | 
|  | */ | 
|  | if (ipr_cmd->sibling->sibling) | 
|  | ipr_cmd->sibling->sibling = NULL; | 
|  | else | 
|  | ipr_cmd->sibling->done(ipr_cmd->sibling); | 
|  |  | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_abort_timeout - An abort task has timed out | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function handles when an abort task times out. If this | 
|  | * happens we issue a bus reset since we have resources tied | 
|  | * up that must be freed before returning to the midlayer. | 
|  | * | 
|  | * Return value: | 
|  | *	none | 
|  | **/ | 
|  | static void ipr_abort_timeout(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_cmnd *reset_cmd; | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_cmd_pkt *cmd_pkt; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | ENTER; | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | if (ipr_cmd->completion.done || ioa_cfg->in_reset_reload) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return; | 
|  | } | 
|  |  | 
|  | sdev_printk(KERN_ERR, ipr_cmd->u.sdev, "Abort timed out. Resetting bus.\n"); | 
|  | reset_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | 
|  | ipr_cmd->sibling = reset_cmd; | 
|  | reset_cmd->sibling = ipr_cmd; | 
|  | reset_cmd->ioarcb.res_handle = ipr_cmd->ioarcb.res_handle; | 
|  | cmd_pkt = &reset_cmd->ioarcb.cmd_pkt; | 
|  | cmd_pkt->request_type = IPR_RQTYPE_IOACMD; | 
|  | cmd_pkt->cdb[0] = IPR_RESET_DEVICE; | 
|  | cmd_pkt->cdb[2] = IPR_RESET_TYPE_SELECT | IPR_BUS_RESET; | 
|  |  | 
|  | ipr_do_req(reset_cmd, ipr_bus_reset_done, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_cancel_op - Cancel specified op | 
|  | * @scsi_cmd:	scsi command struct | 
|  | * | 
|  | * This function cancels specified op. | 
|  | * | 
|  | * Return value: | 
|  | *	SUCCESS / FAILED | 
|  | **/ | 
|  | static int ipr_cancel_op(struct scsi_cmnd *scsi_cmd) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | struct ipr_resource_entry *res; | 
|  | struct ipr_cmd_pkt *cmd_pkt; | 
|  | u32 ioasc, int_reg; | 
|  | int op_found = 0; | 
|  | struct ipr_hrr_queue *hrrq; | 
|  |  | 
|  | ENTER; | 
|  | ioa_cfg = (struct ipr_ioa_cfg *)scsi_cmd->device->host->hostdata; | 
|  | res = scsi_cmd->device->hostdata; | 
|  |  | 
|  | /* If we are currently going through reset/reload, return failed. | 
|  | * This will force the mid-layer to call ipr_eh_host_reset, | 
|  | * which will then go to sleep and wait for the reset to complete | 
|  | */ | 
|  | if (ioa_cfg->in_reset_reload || | 
|  | ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) | 
|  | return FAILED; | 
|  | if (!res) | 
|  | return FAILED; | 
|  |  | 
|  | /* | 
|  | * If we are aborting a timed out op, chances are that the timeout was caused | 
|  | * by a still not detected EEH error. In such cases, reading a register will | 
|  | * trigger the EEH recovery infrastructure. | 
|  | */ | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | 
|  |  | 
|  | if (!ipr_is_gscsi(res)) | 
|  | return FAILED; | 
|  |  | 
|  | for_each_hrrq(hrrq, ioa_cfg) { | 
|  | spin_lock(&hrrq->_lock); | 
|  | list_for_each_entry(ipr_cmd, &hrrq->hrrq_pending_q, queue) { | 
|  | if (ipr_cmd->scsi_cmd == scsi_cmd) { | 
|  | ipr_cmd->done = ipr_scsi_eh_done; | 
|  | op_found = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&hrrq->_lock); | 
|  | } | 
|  |  | 
|  | if (!op_found) | 
|  | return SUCCESS; | 
|  |  | 
|  | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | 
|  | ipr_cmd->ioarcb.res_handle = res->res_handle; | 
|  | cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt; | 
|  | cmd_pkt->request_type = IPR_RQTYPE_IOACMD; | 
|  | cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS; | 
|  | ipr_cmd->u.sdev = scsi_cmd->device; | 
|  |  | 
|  | scmd_printk(KERN_ERR, scsi_cmd, "Aborting command: %02X\n", | 
|  | scsi_cmd->cmnd[0]); | 
|  | ipr_send_blocking_cmd(ipr_cmd, ipr_abort_timeout, IPR_CANCEL_ALL_TIMEOUT); | 
|  | ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | /* | 
|  | * If the abort task timed out and we sent a bus reset, we will get | 
|  | * one the following responses to the abort | 
|  | */ | 
|  | if (ioasc == IPR_IOASC_BUS_WAS_RESET || ioasc == IPR_IOASC_SYNC_REQUIRED) { | 
|  | ioasc = 0; | 
|  | ipr_trace; | 
|  | } | 
|  |  | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | if (!ipr_is_naca_model(res)) | 
|  | res->needs_sync_complete = 1; | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_IOASC_SENSE_KEY(ioasc) ? FAILED : SUCCESS; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_eh_abort - Abort a single op | 
|  | * @scsi_cmd:	scsi command struct | 
|  | * | 
|  | * Return value: | 
|  | * 	SUCCESS / FAILED | 
|  | **/ | 
|  | static int ipr_eh_abort(struct scsi_cmnd *scsi_cmd) | 
|  | { | 
|  | unsigned long flags; | 
|  | int rc; | 
|  |  | 
|  | ENTER; | 
|  |  | 
|  | spin_lock_irqsave(scsi_cmd->device->host->host_lock, flags); | 
|  | rc = ipr_cancel_op(scsi_cmd); | 
|  | spin_unlock_irqrestore(scsi_cmd->device->host->host_lock, flags); | 
|  |  | 
|  | LEAVE; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_handle_other_interrupt - Handle "other" interrupts | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @int_reg:	interrupt register | 
|  | * | 
|  | * Return value: | 
|  | * 	IRQ_NONE / IRQ_HANDLED | 
|  | **/ | 
|  | static irqreturn_t ipr_handle_other_interrupt(struct ipr_ioa_cfg *ioa_cfg, | 
|  | u32 int_reg) | 
|  | { | 
|  | irqreturn_t rc = IRQ_HANDLED; | 
|  | u32 int_mask_reg; | 
|  |  | 
|  | int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg32); | 
|  | int_reg &= ~int_mask_reg; | 
|  |  | 
|  | /* If an interrupt on the adapter did not occur, ignore it. | 
|  | * Or in the case of SIS 64, check for a stage change interrupt. | 
|  | */ | 
|  | if ((int_reg & IPR_PCII_OPER_INTERRUPTS) == 0) { | 
|  | if (ioa_cfg->sis64) { | 
|  | int_mask_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg; | 
|  | if (int_reg & IPR_PCII_IPL_STAGE_CHANGE) { | 
|  |  | 
|  | /* clear stage change */ | 
|  | writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.clr_interrupt_reg); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg) & ~int_mask_reg; | 
|  | list_del(&ioa_cfg->reset_cmd->queue); | 
|  | del_timer(&ioa_cfg->reset_cmd->timer); | 
|  | ipr_reset_ioa_job(ioa_cfg->reset_cmd); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  | } | 
|  |  | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) { | 
|  | /* Mask the interrupt */ | 
|  | writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.set_interrupt_mask_reg); | 
|  |  | 
|  | /* Clear the interrupt */ | 
|  | writel(IPR_PCII_IOA_TRANS_TO_OPER, ioa_cfg->regs.clr_interrupt_reg); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | 
|  |  | 
|  | list_del(&ioa_cfg->reset_cmd->queue); | 
|  | del_timer(&ioa_cfg->reset_cmd->timer); | 
|  | ipr_reset_ioa_job(ioa_cfg->reset_cmd); | 
|  | } else if ((int_reg & IPR_PCII_HRRQ_UPDATED) == int_reg) { | 
|  | if (ioa_cfg->clear_isr) { | 
|  | if (ipr_debug && printk_ratelimit()) | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Spurious interrupt detected. 0x%08X\n", int_reg); | 
|  | writel(IPR_PCII_HRRQ_UPDATED, ioa_cfg->regs.clr_interrupt_reg32); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); | 
|  | return IRQ_NONE; | 
|  | } | 
|  | } else { | 
|  | if (int_reg & IPR_PCII_IOA_UNIT_CHECKED) | 
|  | ioa_cfg->ioa_unit_checked = 1; | 
|  | else if (int_reg & IPR_PCII_NO_HOST_RRQ) | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "No Host RRQ. 0x%08X\n", int_reg); | 
|  | else | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Permanent IOA failure. 0x%08X\n", int_reg); | 
|  |  | 
|  | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | 
|  | ioa_cfg->sdt_state = GET_DUMP; | 
|  |  | 
|  | ipr_mask_and_clear_interrupts(ioa_cfg, ~0); | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_isr_eh - Interrupt service routine error handler | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @msg:	message to log | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_isr_eh(struct ipr_ioa_cfg *ioa_cfg, char *msg, u16 number) | 
|  | { | 
|  | ioa_cfg->errors_logged++; | 
|  | dev_err(&ioa_cfg->pdev->dev, "%s %d\n", msg, number); | 
|  |  | 
|  | if (WAIT_FOR_DUMP == ioa_cfg->sdt_state) | 
|  | ioa_cfg->sdt_state = GET_DUMP; | 
|  |  | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  | } | 
|  |  | 
|  | static int ipr_process_hrrq(struct ipr_hrr_queue *hrr_queue, int budget, | 
|  | struct list_head *doneq) | 
|  | { | 
|  | u32 ioasc; | 
|  | u16 cmd_index; | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_ioa_cfg *ioa_cfg = hrr_queue->ioa_cfg; | 
|  | int num_hrrq = 0; | 
|  |  | 
|  | /* If interrupts are disabled, ignore the interrupt */ | 
|  | if (!hrr_queue->allow_interrupts) | 
|  | return 0; | 
|  |  | 
|  | while ((be32_to_cpu(*hrr_queue->hrrq_curr) & IPR_HRRQ_TOGGLE_BIT) == | 
|  | hrr_queue->toggle_bit) { | 
|  |  | 
|  | cmd_index = (be32_to_cpu(*hrr_queue->hrrq_curr) & | 
|  | IPR_HRRQ_REQ_RESP_HANDLE_MASK) >> | 
|  | IPR_HRRQ_REQ_RESP_HANDLE_SHIFT; | 
|  |  | 
|  | if (unlikely(cmd_index > hrr_queue->max_cmd_id || | 
|  | cmd_index < hrr_queue->min_cmd_id)) { | 
|  | ipr_isr_eh(ioa_cfg, | 
|  | "Invalid response handle from IOA: ", | 
|  | cmd_index); | 
|  | break; | 
|  | } | 
|  |  | 
|  | ipr_cmd = ioa_cfg->ipr_cmnd_list[cmd_index]; | 
|  | ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | ipr_trc_hook(ipr_cmd, IPR_TRACE_FINISH, ioasc); | 
|  |  | 
|  | list_move_tail(&ipr_cmd->queue, doneq); | 
|  |  | 
|  | if (hrr_queue->hrrq_curr < hrr_queue->hrrq_end) { | 
|  | hrr_queue->hrrq_curr++; | 
|  | } else { | 
|  | hrr_queue->hrrq_curr = hrr_queue->hrrq_start; | 
|  | hrr_queue->toggle_bit ^= 1u; | 
|  | } | 
|  | num_hrrq++; | 
|  | if (budget > 0 && num_hrrq >= budget) | 
|  | break; | 
|  | } | 
|  |  | 
|  | return num_hrrq; | 
|  | } | 
|  |  | 
|  | static int ipr_iopoll(struct blk_iopoll *iop, int budget) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | struct ipr_hrr_queue *hrrq; | 
|  | struct ipr_cmnd *ipr_cmd, *temp; | 
|  | unsigned long hrrq_flags; | 
|  | int completed_ops; | 
|  | LIST_HEAD(doneq); | 
|  |  | 
|  | hrrq = container_of(iop, struct ipr_hrr_queue, iopoll); | 
|  | ioa_cfg = hrrq->ioa_cfg; | 
|  |  | 
|  | spin_lock_irqsave(hrrq->lock, hrrq_flags); | 
|  | completed_ops = ipr_process_hrrq(hrrq, budget, &doneq); | 
|  |  | 
|  | if (completed_ops < budget) | 
|  | blk_iopoll_complete(iop); | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  |  | 
|  | list_for_each_entry_safe(ipr_cmd, temp, &doneq, queue) { | 
|  | list_del(&ipr_cmd->queue); | 
|  | del_timer(&ipr_cmd->timer); | 
|  | ipr_cmd->fast_done(ipr_cmd); | 
|  | } | 
|  |  | 
|  | return completed_ops; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_isr - Interrupt service routine | 
|  | * @irq:	irq number | 
|  | * @devp:	pointer to ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	IRQ_NONE / IRQ_HANDLED | 
|  | **/ | 
|  | static irqreturn_t ipr_isr(int irq, void *devp) | 
|  | { | 
|  | struct ipr_hrr_queue *hrrq = (struct ipr_hrr_queue *)devp; | 
|  | struct ipr_ioa_cfg *ioa_cfg = hrrq->ioa_cfg; | 
|  | unsigned long hrrq_flags = 0; | 
|  | u32 int_reg = 0; | 
|  | int num_hrrq = 0; | 
|  | int irq_none = 0; | 
|  | struct ipr_cmnd *ipr_cmd, *temp; | 
|  | irqreturn_t rc = IRQ_NONE; | 
|  | LIST_HEAD(doneq); | 
|  |  | 
|  | spin_lock_irqsave(hrrq->lock, hrrq_flags); | 
|  | /* If interrupts are disabled, ignore the interrupt */ | 
|  | if (!hrrq->allow_interrupts) { | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | while (1) { | 
|  | if (ipr_process_hrrq(hrrq, -1, &doneq)) { | 
|  | rc =  IRQ_HANDLED; | 
|  |  | 
|  | if (!ioa_cfg->clear_isr) | 
|  | break; | 
|  |  | 
|  | /* Clear the PCI interrupt */ | 
|  | num_hrrq = 0; | 
|  | do { | 
|  | writel(IPR_PCII_HRRQ_UPDATED, | 
|  | ioa_cfg->regs.clr_interrupt_reg32); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); | 
|  | } while (int_reg & IPR_PCII_HRRQ_UPDATED && | 
|  | num_hrrq++ < IPR_MAX_HRRQ_RETRIES); | 
|  |  | 
|  | } else if (rc == IRQ_NONE && irq_none == 0) { | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); | 
|  | irq_none++; | 
|  | } else if (num_hrrq == IPR_MAX_HRRQ_RETRIES && | 
|  | int_reg & IPR_PCII_HRRQ_UPDATED) { | 
|  | ipr_isr_eh(ioa_cfg, | 
|  | "Error clearing HRRQ: ", num_hrrq); | 
|  | rc = IRQ_HANDLED; | 
|  | break; | 
|  | } else | 
|  | break; | 
|  | } | 
|  |  | 
|  | if (unlikely(rc == IRQ_NONE)) | 
|  | rc = ipr_handle_other_interrupt(ioa_cfg, int_reg); | 
|  |  | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | list_for_each_entry_safe(ipr_cmd, temp, &doneq, queue) { | 
|  | list_del(&ipr_cmd->queue); | 
|  | del_timer(&ipr_cmd->timer); | 
|  | ipr_cmd->fast_done(ipr_cmd); | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_isr_mhrrq - Interrupt service routine | 
|  | * @irq:	irq number | 
|  | * @devp:	pointer to ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | *	IRQ_NONE / IRQ_HANDLED | 
|  | **/ | 
|  | static irqreturn_t ipr_isr_mhrrq(int irq, void *devp) | 
|  | { | 
|  | struct ipr_hrr_queue *hrrq = (struct ipr_hrr_queue *)devp; | 
|  | struct ipr_ioa_cfg *ioa_cfg = hrrq->ioa_cfg; | 
|  | unsigned long hrrq_flags = 0; | 
|  | struct ipr_cmnd *ipr_cmd, *temp; | 
|  | irqreturn_t rc = IRQ_NONE; | 
|  | LIST_HEAD(doneq); | 
|  |  | 
|  | spin_lock_irqsave(hrrq->lock, hrrq_flags); | 
|  |  | 
|  | /* If interrupts are disabled, ignore the interrupt */ | 
|  | if (!hrrq->allow_interrupts) { | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | return IRQ_NONE; | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->iopoll_weight && ioa_cfg->sis64 && ioa_cfg->nvectors > 1) { | 
|  | if ((be32_to_cpu(*hrrq->hrrq_curr) & IPR_HRRQ_TOGGLE_BIT) == | 
|  | hrrq->toggle_bit) { | 
|  | if (!blk_iopoll_sched_prep(&hrrq->iopoll)) | 
|  | blk_iopoll_sched(&hrrq->iopoll); | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | return IRQ_HANDLED; | 
|  | } | 
|  | } else { | 
|  | if ((be32_to_cpu(*hrrq->hrrq_curr) & IPR_HRRQ_TOGGLE_BIT) == | 
|  | hrrq->toggle_bit) | 
|  |  | 
|  | if (ipr_process_hrrq(hrrq, -1, &doneq)) | 
|  | rc =  IRQ_HANDLED; | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  |  | 
|  | list_for_each_entry_safe(ipr_cmd, temp, &doneq, queue) { | 
|  | list_del(&ipr_cmd->queue); | 
|  | del_timer(&ipr_cmd->timer); | 
|  | ipr_cmd->fast_done(ipr_cmd); | 
|  | } | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_build_ioadl64 - Build a scatter/gather list and map the buffer | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / -1 on failure | 
|  | **/ | 
|  | static int ipr_build_ioadl64(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | int i, nseg; | 
|  | struct scatterlist *sg; | 
|  | u32 length; | 
|  | u32 ioadl_flags = 0; | 
|  | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ioadl64; | 
|  |  | 
|  | length = scsi_bufflen(scsi_cmd); | 
|  | if (!length) | 
|  | return 0; | 
|  |  | 
|  | nseg = scsi_dma_map(scsi_cmd); | 
|  | if (nseg < 0) { | 
|  | if (printk_ratelimit()) | 
|  | dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | ipr_cmd->dma_use_sg = nseg; | 
|  |  | 
|  | ioarcb->data_transfer_length = cpu_to_be32(length); | 
|  | ioarcb->ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl64_desc) * ipr_cmd->dma_use_sg); | 
|  |  | 
|  | if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) { | 
|  | ioadl_flags = IPR_IOADL_FLAGS_WRITE; | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | 
|  | } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) | 
|  | ioadl_flags = IPR_IOADL_FLAGS_READ; | 
|  |  | 
|  | scsi_for_each_sg(scsi_cmd, sg, ipr_cmd->dma_use_sg, i) { | 
|  | ioadl64[i].flags = cpu_to_be32(ioadl_flags); | 
|  | ioadl64[i].data_len = cpu_to_be32(sg_dma_len(sg)); | 
|  | ioadl64[i].address = cpu_to_be64(sg_dma_address(sg)); | 
|  | } | 
|  |  | 
|  | ioadl64[i-1].flags |= cpu_to_be32(IPR_IOADL_FLAGS_LAST); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_build_ioadl - Build a scatter/gather list and map the buffer | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / -1 on failure | 
|  | **/ | 
|  | static int ipr_build_ioadl(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | int i, nseg; | 
|  | struct scatterlist *sg; | 
|  | u32 length; | 
|  | u32 ioadl_flags = 0; | 
|  | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl; | 
|  |  | 
|  | length = scsi_bufflen(scsi_cmd); | 
|  | if (!length) | 
|  | return 0; | 
|  |  | 
|  | nseg = scsi_dma_map(scsi_cmd); | 
|  | if (nseg < 0) { | 
|  | dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n"); | 
|  | return -1; | 
|  | } | 
|  |  | 
|  | ipr_cmd->dma_use_sg = nseg; | 
|  |  | 
|  | if (scsi_cmd->sc_data_direction == DMA_TO_DEVICE) { | 
|  | ioadl_flags = IPR_IOADL_FLAGS_WRITE; | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | 
|  | ioarcb->data_transfer_length = cpu_to_be32(length); | 
|  | ioarcb->ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); | 
|  | } else if (scsi_cmd->sc_data_direction == DMA_FROM_DEVICE) { | 
|  | ioadl_flags = IPR_IOADL_FLAGS_READ; | 
|  | ioarcb->read_data_transfer_length = cpu_to_be32(length); | 
|  | ioarcb->read_ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); | 
|  | } | 
|  |  | 
|  | if (ipr_cmd->dma_use_sg <= ARRAY_SIZE(ioarcb->u.add_data.u.ioadl)) { | 
|  | ioadl = ioarcb->u.add_data.u.ioadl; | 
|  | ioarcb->write_ioadl_addr = cpu_to_be32((ipr_cmd->dma_addr) + | 
|  | offsetof(struct ipr_ioarcb, u.add_data)); | 
|  | ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr; | 
|  | } | 
|  |  | 
|  | scsi_for_each_sg(scsi_cmd, sg, ipr_cmd->dma_use_sg, i) { | 
|  | ioadl[i].flags_and_data_len = | 
|  | cpu_to_be32(ioadl_flags | sg_dma_len(sg)); | 
|  | ioadl[i].address = cpu_to_be32(sg_dma_address(sg)); | 
|  | } | 
|  |  | 
|  | ioadl[i-1].flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_task_attributes - Translate SPI Q-Tag to task attributes | 
|  | * @scsi_cmd:	scsi command struct | 
|  | * | 
|  | * Return value: | 
|  | * 	task attributes | 
|  | **/ | 
|  | static u8 ipr_get_task_attributes(struct scsi_cmnd *scsi_cmd) | 
|  | { | 
|  | u8 tag[2]; | 
|  | u8 rc = IPR_FLAGS_LO_UNTAGGED_TASK; | 
|  |  | 
|  | if (scsi_populate_tag_msg(scsi_cmd, tag)) { | 
|  | switch (tag[0]) { | 
|  | case MSG_SIMPLE_TAG: | 
|  | rc = IPR_FLAGS_LO_SIMPLE_TASK; | 
|  | break; | 
|  | case MSG_HEAD_TAG: | 
|  | rc = IPR_FLAGS_LO_HEAD_OF_Q_TASK; | 
|  | break; | 
|  | case MSG_ORDERED_TAG: | 
|  | rc = IPR_FLAGS_LO_ORDERED_TASK; | 
|  | break; | 
|  | }; | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_erp_done - Process completion of ERP for a device | 
|  | * @ipr_cmd:		ipr command struct | 
|  | * | 
|  | * This function copies the sense buffer into the scsi_cmd | 
|  | * struct and pushes the scsi_done function. | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_erp_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | 
|  | struct ipr_resource_entry *res = scsi_cmd->device->hostdata; | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | if (IPR_IOASC_SENSE_KEY(ioasc) > 0) { | 
|  | scsi_cmd->result |= (DID_ERROR << 16); | 
|  | scmd_printk(KERN_ERR, scsi_cmd, | 
|  | "Request Sense failed with IOASC: 0x%08X\n", ioasc); | 
|  | } else { | 
|  | memcpy(scsi_cmd->sense_buffer, ipr_cmd->sense_buffer, | 
|  | SCSI_SENSE_BUFFERSIZE); | 
|  | } | 
|  |  | 
|  | if (res) { | 
|  | if (!ipr_is_naca_model(res)) | 
|  | res->needs_sync_complete = 1; | 
|  | res->in_erp = 0; | 
|  | } | 
|  | scsi_dma_unmap(ipr_cmd->scsi_cmd); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | scsi_cmd->scsi_done(scsi_cmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reinit_ipr_cmnd_for_erp - Re-initialize a cmnd block to be used for ERP | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_reinit_ipr_cmnd_for_erp(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa; | 
|  | dma_addr_t dma_addr = ipr_cmd->dma_addr; | 
|  |  | 
|  | memset(&ioarcb->cmd_pkt, 0, sizeof(struct ipr_cmd_pkt)); | 
|  | ioarcb->data_transfer_length = 0; | 
|  | ioarcb->read_data_transfer_length = 0; | 
|  | ioarcb->ioadl_len = 0; | 
|  | ioarcb->read_ioadl_len = 0; | 
|  | ioasa->hdr.ioasc = 0; | 
|  | ioasa->hdr.residual_data_len = 0; | 
|  |  | 
|  | if (ipr_cmd->ioa_cfg->sis64) | 
|  | ioarcb->u.sis64_addr_data.data_ioadl_addr = | 
|  | cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64)); | 
|  | else { | 
|  | ioarcb->write_ioadl_addr = | 
|  | cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl)); | 
|  | ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_erp_request_sense - Send request sense to a device | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function sends a request sense to a device as a result | 
|  | * of a check condition. | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_erp_request_sense(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_cmd_pkt *cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt; | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | if (IPR_IOASC_SENSE_KEY(ioasc) > 0) { | 
|  | ipr_erp_done(ipr_cmd); | 
|  | return; | 
|  | } | 
|  |  | 
|  | ipr_reinit_ipr_cmnd_for_erp(ipr_cmd); | 
|  |  | 
|  | cmd_pkt->request_type = IPR_RQTYPE_SCSICDB; | 
|  | cmd_pkt->cdb[0] = REQUEST_SENSE; | 
|  | cmd_pkt->cdb[4] = SCSI_SENSE_BUFFERSIZE; | 
|  | cmd_pkt->flags_hi |= IPR_FLAGS_HI_SYNC_OVERRIDE; | 
|  | cmd_pkt->flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK; | 
|  | cmd_pkt->timeout = cpu_to_be16(IPR_REQUEST_SENSE_TIMEOUT / HZ); | 
|  |  | 
|  | ipr_init_ioadl(ipr_cmd, ipr_cmd->sense_buffer_dma, | 
|  | SCSI_SENSE_BUFFERSIZE, IPR_IOADL_FLAGS_READ_LAST); | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_erp_done, ipr_timeout, | 
|  | IPR_REQUEST_SENSE_TIMEOUT * 2); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_erp_cancel_all - Send cancel all to a device | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function sends a cancel all to a device to clear the | 
|  | * queue. If we are running TCQ on the device, QERR is set to 1, | 
|  | * which means all outstanding ops have been dropped on the floor. | 
|  | * Cancel all will return them to us. | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_erp_cancel_all(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | 
|  | struct ipr_resource_entry *res = scsi_cmd->device->hostdata; | 
|  | struct ipr_cmd_pkt *cmd_pkt; | 
|  |  | 
|  | res->in_erp = 1; | 
|  |  | 
|  | ipr_reinit_ipr_cmnd_for_erp(ipr_cmd); | 
|  |  | 
|  | if (!scsi_get_tag_type(scsi_cmd->device)) { | 
|  | ipr_erp_request_sense(ipr_cmd); | 
|  | return; | 
|  | } | 
|  |  | 
|  | cmd_pkt = &ipr_cmd->ioarcb.cmd_pkt; | 
|  | cmd_pkt->request_type = IPR_RQTYPE_IOACMD; | 
|  | cmd_pkt->cdb[0] = IPR_CANCEL_ALL_REQUESTS; | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_erp_request_sense, ipr_timeout, | 
|  | IPR_CANCEL_ALL_TIMEOUT); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_dump_ioasa - Dump contents of IOASA | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @res:		resource entry struct | 
|  | * | 
|  | * This function is invoked by the interrupt handler when ops | 
|  | * fail. It will log the IOASA if appropriate. Only called | 
|  | * for GPDD ops. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_dump_ioasa(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_cmnd *ipr_cmd, struct ipr_resource_entry *res) | 
|  | { | 
|  | int i; | 
|  | u16 data_len; | 
|  | u32 ioasc, fd_ioasc; | 
|  | struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa; | 
|  | __be32 *ioasa_data = (__be32 *)ioasa; | 
|  | int error_index; | 
|  |  | 
|  | ioasc = be32_to_cpu(ioasa->hdr.ioasc) & IPR_IOASC_IOASC_MASK; | 
|  | fd_ioasc = be32_to_cpu(ioasa->hdr.fd_ioasc) & IPR_IOASC_IOASC_MASK; | 
|  |  | 
|  | if (0 == ioasc) | 
|  | return; | 
|  |  | 
|  | if (ioa_cfg->log_level < IPR_DEFAULT_LOG_LEVEL) | 
|  | return; | 
|  |  | 
|  | if (ioasc == IPR_IOASC_BUS_WAS_RESET && fd_ioasc) | 
|  | error_index = ipr_get_error(fd_ioasc); | 
|  | else | 
|  | error_index = ipr_get_error(ioasc); | 
|  |  | 
|  | if (ioa_cfg->log_level < IPR_MAX_LOG_LEVEL) { | 
|  | /* Don't log an error if the IOA already logged one */ | 
|  | if (ioasa->hdr.ilid != 0) | 
|  | return; | 
|  |  | 
|  | if (!ipr_is_gscsi(res)) | 
|  | return; | 
|  |  | 
|  | if (ipr_error_table[error_index].log_ioasa == 0) | 
|  | return; | 
|  | } | 
|  |  | 
|  | ipr_res_err(ioa_cfg, res, "%s\n", ipr_error_table[error_index].error); | 
|  |  | 
|  | data_len = be16_to_cpu(ioasa->hdr.ret_stat_len); | 
|  | if (ioa_cfg->sis64 && sizeof(struct ipr_ioasa64) < data_len) | 
|  | data_len = sizeof(struct ipr_ioasa64); | 
|  | else if (!ioa_cfg->sis64 && sizeof(struct ipr_ioasa) < data_len) | 
|  | data_len = sizeof(struct ipr_ioasa); | 
|  |  | 
|  | ipr_err("IOASA Dump:\n"); | 
|  |  | 
|  | for (i = 0; i < data_len / 4; i += 4) { | 
|  | ipr_err("%08X: %08X %08X %08X %08X\n", i*4, | 
|  | be32_to_cpu(ioasa_data[i]), | 
|  | be32_to_cpu(ioasa_data[i+1]), | 
|  | be32_to_cpu(ioasa_data[i+2]), | 
|  | be32_to_cpu(ioasa_data[i+3])); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_gen_sense - Generate SCSI sense data from an IOASA | 
|  | * @ioasa:		IOASA | 
|  | * @sense_buf:	sense data buffer | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_gen_sense(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | u32 failing_lba; | 
|  | u8 *sense_buf = ipr_cmd->scsi_cmd->sense_buffer; | 
|  | struct ipr_resource_entry *res = ipr_cmd->scsi_cmd->device->hostdata; | 
|  | struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa; | 
|  | u32 ioasc = be32_to_cpu(ioasa->hdr.ioasc); | 
|  |  | 
|  | memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE); | 
|  |  | 
|  | if (ioasc >= IPR_FIRST_DRIVER_IOASC) | 
|  | return; | 
|  |  | 
|  | ipr_cmd->scsi_cmd->result = SAM_STAT_CHECK_CONDITION; | 
|  |  | 
|  | if (ipr_is_vset_device(res) && | 
|  | ioasc == IPR_IOASC_MED_DO_NOT_REALLOC && | 
|  | ioasa->u.vset.failing_lba_hi != 0) { | 
|  | sense_buf[0] = 0x72; | 
|  | sense_buf[1] = IPR_IOASC_SENSE_KEY(ioasc); | 
|  | sense_buf[2] = IPR_IOASC_SENSE_CODE(ioasc); | 
|  | sense_buf[3] = IPR_IOASC_SENSE_QUAL(ioasc); | 
|  |  | 
|  | sense_buf[7] = 12; | 
|  | sense_buf[8] = 0; | 
|  | sense_buf[9] = 0x0A; | 
|  | sense_buf[10] = 0x80; | 
|  |  | 
|  | failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_hi); | 
|  |  | 
|  | sense_buf[12] = (failing_lba & 0xff000000) >> 24; | 
|  | sense_buf[13] = (failing_lba & 0x00ff0000) >> 16; | 
|  | sense_buf[14] = (failing_lba & 0x0000ff00) >> 8; | 
|  | sense_buf[15] = failing_lba & 0x000000ff; | 
|  |  | 
|  | failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo); | 
|  |  | 
|  | sense_buf[16] = (failing_lba & 0xff000000) >> 24; | 
|  | sense_buf[17] = (failing_lba & 0x00ff0000) >> 16; | 
|  | sense_buf[18] = (failing_lba & 0x0000ff00) >> 8; | 
|  | sense_buf[19] = failing_lba & 0x000000ff; | 
|  | } else { | 
|  | sense_buf[0] = 0x70; | 
|  | sense_buf[2] = IPR_IOASC_SENSE_KEY(ioasc); | 
|  | sense_buf[12] = IPR_IOASC_SENSE_CODE(ioasc); | 
|  | sense_buf[13] = IPR_IOASC_SENSE_QUAL(ioasc); | 
|  |  | 
|  | /* Illegal request */ | 
|  | if ((IPR_IOASC_SENSE_KEY(ioasc) == 0x05) && | 
|  | (be32_to_cpu(ioasa->hdr.ioasc_specific) & IPR_FIELD_POINTER_VALID)) { | 
|  | sense_buf[7] = 10;	/* additional length */ | 
|  |  | 
|  | /* IOARCB was in error */ | 
|  | if (IPR_IOASC_SENSE_CODE(ioasc) == 0x24) | 
|  | sense_buf[15] = 0xC0; | 
|  | else	/* Parameter data was invalid */ | 
|  | sense_buf[15] = 0x80; | 
|  |  | 
|  | sense_buf[16] = | 
|  | ((IPR_FIELD_POINTER_MASK & | 
|  | be32_to_cpu(ioasa->hdr.ioasc_specific)) >> 8) & 0xff; | 
|  | sense_buf[17] = | 
|  | (IPR_FIELD_POINTER_MASK & | 
|  | be32_to_cpu(ioasa->hdr.ioasc_specific)) & 0xff; | 
|  | } else { | 
|  | if (ioasc == IPR_IOASC_MED_DO_NOT_REALLOC) { | 
|  | if (ipr_is_vset_device(res)) | 
|  | failing_lba = be32_to_cpu(ioasa->u.vset.failing_lba_lo); | 
|  | else | 
|  | failing_lba = be32_to_cpu(ioasa->u.dasd.failing_lba); | 
|  |  | 
|  | sense_buf[0] |= 0x80;	/* Or in the Valid bit */ | 
|  | sense_buf[3] = (failing_lba & 0xff000000) >> 24; | 
|  | sense_buf[4] = (failing_lba & 0x00ff0000) >> 16; | 
|  | sense_buf[5] = (failing_lba & 0x0000ff00) >> 8; | 
|  | sense_buf[6] = failing_lba & 0x000000ff; | 
|  | } | 
|  |  | 
|  | sense_buf[7] = 6;	/* additional length */ | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_autosense - Copy autosense data to sense buffer | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function copies the autosense buffer to the buffer | 
|  | * in the scsi_cmd, if there is autosense available. | 
|  | * | 
|  | * Return value: | 
|  | *	1 if autosense was available / 0 if not | 
|  | **/ | 
|  | static int ipr_get_autosense(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioasa *ioasa = &ipr_cmd->s.ioasa; | 
|  | struct ipr_ioasa64 *ioasa64 = &ipr_cmd->s.ioasa64; | 
|  |  | 
|  | if ((be32_to_cpu(ioasa->hdr.ioasc_specific) & IPR_AUTOSENSE_VALID) == 0) | 
|  | return 0; | 
|  |  | 
|  | if (ipr_cmd->ioa_cfg->sis64) | 
|  | memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa64->auto_sense.data, | 
|  | min_t(u16, be16_to_cpu(ioasa64->auto_sense.auto_sense_len), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | else | 
|  | memcpy(ipr_cmd->scsi_cmd->sense_buffer, ioasa->auto_sense.data, | 
|  | min_t(u16, be16_to_cpu(ioasa->auto_sense.auto_sense_len), | 
|  | SCSI_SENSE_BUFFERSIZE)); | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_erp_start - Process an error response for a SCSI op | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function determines whether or not to initiate ERP | 
|  | * on the affected device. | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_erp_start(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | 
|  | struct ipr_resource_entry *res = scsi_cmd->device->hostdata; | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  | u32 masked_ioasc = ioasc & IPR_IOASC_IOASC_MASK; | 
|  |  | 
|  | if (!res) { | 
|  | ipr_scsi_eh_done(ipr_cmd); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (!ipr_is_gscsi(res) && masked_ioasc != IPR_IOASC_HW_DEV_BUS_STATUS) | 
|  | ipr_gen_sense(ipr_cmd); | 
|  |  | 
|  | ipr_dump_ioasa(ioa_cfg, ipr_cmd, res); | 
|  |  | 
|  | switch (masked_ioasc) { | 
|  | case IPR_IOASC_ABORTED_CMD_TERM_BY_HOST: | 
|  | if (ipr_is_naca_model(res)) | 
|  | scsi_cmd->result |= (DID_ABORT << 16); | 
|  | else | 
|  | scsi_cmd->result |= (DID_IMM_RETRY << 16); | 
|  | break; | 
|  | case IPR_IOASC_IR_RESOURCE_HANDLE: | 
|  | case IPR_IOASC_IR_NO_CMDS_TO_2ND_IOA: | 
|  | scsi_cmd->result |= (DID_NO_CONNECT << 16); | 
|  | break; | 
|  | case IPR_IOASC_HW_SEL_TIMEOUT: | 
|  | scsi_cmd->result |= (DID_NO_CONNECT << 16); | 
|  | if (!ipr_is_naca_model(res)) | 
|  | res->needs_sync_complete = 1; | 
|  | break; | 
|  | case IPR_IOASC_SYNC_REQUIRED: | 
|  | if (!res->in_erp) | 
|  | res->needs_sync_complete = 1; | 
|  | scsi_cmd->result |= (DID_IMM_RETRY << 16); | 
|  | break; | 
|  | case IPR_IOASC_MED_DO_NOT_REALLOC: /* prevent retries */ | 
|  | case IPR_IOASA_IR_DUAL_IOA_DISABLED: | 
|  | scsi_cmd->result |= (DID_PASSTHROUGH << 16); | 
|  | break; | 
|  | case IPR_IOASC_BUS_WAS_RESET: | 
|  | case IPR_IOASC_BUS_WAS_RESET_BY_OTHER: | 
|  | /* | 
|  | * Report the bus reset and ask for a retry. The device | 
|  | * will give CC/UA the next command. | 
|  | */ | 
|  | if (!res->resetting_device) | 
|  | scsi_report_bus_reset(ioa_cfg->host, scsi_cmd->device->channel); | 
|  | scsi_cmd->result |= (DID_ERROR << 16); | 
|  | if (!ipr_is_naca_model(res)) | 
|  | res->needs_sync_complete = 1; | 
|  | break; | 
|  | case IPR_IOASC_HW_DEV_BUS_STATUS: | 
|  | scsi_cmd->result |= IPR_IOASC_SENSE_STATUS(ioasc); | 
|  | if (IPR_IOASC_SENSE_STATUS(ioasc) == SAM_STAT_CHECK_CONDITION) { | 
|  | if (!ipr_get_autosense(ipr_cmd)) { | 
|  | if (!ipr_is_naca_model(res)) { | 
|  | ipr_erp_cancel_all(ipr_cmd); | 
|  | return; | 
|  | } | 
|  | } | 
|  | } | 
|  | if (!ipr_is_naca_model(res)) | 
|  | res->needs_sync_complete = 1; | 
|  | break; | 
|  | case IPR_IOASC_NR_INIT_CMD_REQUIRED: | 
|  | break; | 
|  | default: | 
|  | if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR) | 
|  | scsi_cmd->result |= (DID_ERROR << 16); | 
|  | if (!ipr_is_vset_device(res) && !ipr_is_naca_model(res)) | 
|  | res->needs_sync_complete = 1; | 
|  | break; | 
|  | } | 
|  |  | 
|  | scsi_dma_unmap(ipr_cmd->scsi_cmd); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | scsi_cmd->scsi_done(scsi_cmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_scsi_done - mid-layer done function | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function is invoked by the interrupt handler for | 
|  | * ops generated by the SCSI mid-layer | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_scsi_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct scsi_cmnd *scsi_cmd = ipr_cmd->scsi_cmd; | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  | unsigned long hrrq_flags; | 
|  |  | 
|  | scsi_set_resid(scsi_cmd, be32_to_cpu(ipr_cmd->s.ioasa.hdr.residual_data_len)); | 
|  |  | 
|  | if (likely(IPR_IOASC_SENSE_KEY(ioasc) == 0)) { | 
|  | scsi_dma_unmap(scsi_cmd); | 
|  |  | 
|  | spin_lock_irqsave(ipr_cmd->hrrq->lock, hrrq_flags); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | scsi_cmd->scsi_done(scsi_cmd); | 
|  | spin_unlock_irqrestore(ipr_cmd->hrrq->lock, hrrq_flags); | 
|  | } else { | 
|  | spin_lock_irqsave(ipr_cmd->hrrq->lock, hrrq_flags); | 
|  | ipr_erp_start(ioa_cfg, ipr_cmd); | 
|  | spin_unlock_irqrestore(ipr_cmd->hrrq->lock, hrrq_flags); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_queuecommand - Queue a mid-layer request | 
|  | * @shost:		scsi host struct | 
|  | * @scsi_cmd:	scsi command struct | 
|  | * | 
|  | * This function queues a request generated by the mid-layer. | 
|  | * | 
|  | * Return value: | 
|  | *	0 on success | 
|  | *	SCSI_MLQUEUE_DEVICE_BUSY if device is busy | 
|  | *	SCSI_MLQUEUE_HOST_BUSY if host is busy | 
|  | **/ | 
|  | static int ipr_queuecommand(struct Scsi_Host *shost, | 
|  | struct scsi_cmnd *scsi_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | struct ipr_resource_entry *res; | 
|  | struct ipr_ioarcb *ioarcb; | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | unsigned long hrrq_flags, lock_flags; | 
|  | int rc; | 
|  | struct ipr_hrr_queue *hrrq; | 
|  | int hrrq_id; | 
|  |  | 
|  | ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; | 
|  |  | 
|  | scsi_cmd->result = (DID_OK << 16); | 
|  | res = scsi_cmd->device->hostdata; | 
|  |  | 
|  | if (ipr_is_gata(res) && res->sata_port) { | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | rc = ata_sas_queuecmd(scsi_cmd, res->sata_port->ap); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | hrrq_id = ipr_get_hrrq_index(ioa_cfg); | 
|  | hrrq = &ioa_cfg->hrrq[hrrq_id]; | 
|  |  | 
|  | spin_lock_irqsave(hrrq->lock, hrrq_flags); | 
|  | /* | 
|  | * We are currently blocking all devices due to a host reset | 
|  | * We have told the host to stop giving us new requests, but | 
|  | * ERP ops don't count. FIXME | 
|  | */ | 
|  | if (unlikely(!hrrq->allow_cmds && !hrrq->ioa_is_dead && !hrrq->removing_ioa)) { | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * FIXME - Create scsi_set_host_offline interface | 
|  | *  and the ioa_is_dead check can be removed | 
|  | */ | 
|  | if (unlikely(hrrq->ioa_is_dead || hrrq->removing_ioa || !res)) { | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | goto err_nodev; | 
|  | } | 
|  |  | 
|  | ipr_cmd = __ipr_get_free_ipr_cmnd(hrrq); | 
|  | if (ipr_cmd == NULL) { | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  |  | 
|  | ipr_init_ipr_cmnd(ipr_cmd, ipr_scsi_done); | 
|  | ioarcb = &ipr_cmd->ioarcb; | 
|  |  | 
|  | memcpy(ioarcb->cmd_pkt.cdb, scsi_cmd->cmnd, scsi_cmd->cmd_len); | 
|  | ipr_cmd->scsi_cmd = scsi_cmd; | 
|  | ipr_cmd->done = ipr_scsi_eh_done; | 
|  |  | 
|  | if (ipr_is_gscsi(res) || ipr_is_vset_device(res)) { | 
|  | if (scsi_cmd->underflow == 0) | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK; | 
|  |  | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC; | 
|  | if (ipr_is_gscsi(res) && res->reset_occurred) { | 
|  | res->reset_occurred = 0; | 
|  | ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST; | 
|  | } | 
|  | ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR; | 
|  | ioarcb->cmd_pkt.flags_lo |= ipr_get_task_attributes(scsi_cmd); | 
|  | } | 
|  |  | 
|  | if (scsi_cmd->cmnd[0] >= 0xC0 && | 
|  | (!ipr_is_gscsi(res) || scsi_cmd->cmnd[0] == IPR_QUERY_RSRC_STATE)) { | 
|  | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | rc = ipr_build_ioadl64(ioa_cfg, ipr_cmd); | 
|  | else | 
|  | rc = ipr_build_ioadl(ioa_cfg, ipr_cmd); | 
|  |  | 
|  | spin_lock_irqsave(hrrq->lock, hrrq_flags); | 
|  | if (unlikely(rc || (!hrrq->allow_cmds && !hrrq->ioa_is_dead))) { | 
|  | list_add_tail(&ipr_cmd->queue, &hrrq->hrrq_free_q); | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | if (!rc) | 
|  | scsi_dma_unmap(scsi_cmd); | 
|  | return SCSI_MLQUEUE_HOST_BUSY; | 
|  | } | 
|  |  | 
|  | if (unlikely(hrrq->ioa_is_dead)) { | 
|  | list_add_tail(&ipr_cmd->queue, &hrrq->hrrq_free_q); | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | scsi_dma_unmap(scsi_cmd); | 
|  | goto err_nodev; | 
|  | } | 
|  |  | 
|  | ioarcb->res_handle = res->res_handle; | 
|  | if (res->needs_sync_complete) { | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_SYNC_COMPLETE; | 
|  | res->needs_sync_complete = 0; | 
|  | } | 
|  | list_add_tail(&ipr_cmd->queue, &hrrq->hrrq_pending_q); | 
|  | ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_RES_PHYS_LOC(res)); | 
|  | ipr_send_command(ipr_cmd); | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | return 0; | 
|  |  | 
|  | err_nodev: | 
|  | spin_lock_irqsave(hrrq->lock, hrrq_flags); | 
|  | memset(scsi_cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); | 
|  | scsi_cmd->result = (DID_NO_CONNECT << 16); | 
|  | scsi_cmd->scsi_done(scsi_cmd); | 
|  | spin_unlock_irqrestore(hrrq->lock, hrrq_flags); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioctl - IOCTL handler | 
|  | * @sdev:	scsi device struct | 
|  | * @cmd:	IOCTL cmd | 
|  | * @arg:	IOCTL arg | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / other on failure | 
|  | **/ | 
|  | static int ipr_ioctl(struct scsi_device *sdev, int cmd, void __user *arg) | 
|  | { | 
|  | struct ipr_resource_entry *res; | 
|  |  | 
|  | res = (struct ipr_resource_entry *)sdev->hostdata; | 
|  | if (res && ipr_is_gata(res)) { | 
|  | if (cmd == HDIO_GET_IDENTITY) | 
|  | return -ENOTTY; | 
|  | return ata_sas_scsi_ioctl(res->sata_port->ap, sdev, cmd, arg); | 
|  | } | 
|  |  | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_info - Get information about the card/driver | 
|  | * @scsi_host:	scsi host struct | 
|  | * | 
|  | * Return value: | 
|  | * 	pointer to buffer with description string | 
|  | **/ | 
|  | static const char *ipr_ioa_info(struct Scsi_Host *host) | 
|  | { | 
|  | static char buffer[512]; | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | ioa_cfg = (struct ipr_ioa_cfg *) host->hostdata; | 
|  |  | 
|  | spin_lock_irqsave(host->host_lock, lock_flags); | 
|  | sprintf(buffer, "IBM %X Storage Adapter", ioa_cfg->type); | 
|  | spin_unlock_irqrestore(host->host_lock, lock_flags); | 
|  |  | 
|  | return buffer; | 
|  | } | 
|  |  | 
|  | static struct scsi_host_template driver_template = { | 
|  | .module = THIS_MODULE, | 
|  | .name = "IPR", | 
|  | .info = ipr_ioa_info, | 
|  | .ioctl = ipr_ioctl, | 
|  | .queuecommand = ipr_queuecommand, | 
|  | .eh_abort_handler = ipr_eh_abort, | 
|  | .eh_device_reset_handler = ipr_eh_dev_reset, | 
|  | .eh_host_reset_handler = ipr_eh_host_reset, | 
|  | .slave_alloc = ipr_slave_alloc, | 
|  | .slave_configure = ipr_slave_configure, | 
|  | .slave_destroy = ipr_slave_destroy, | 
|  | .target_alloc = ipr_target_alloc, | 
|  | .target_destroy = ipr_target_destroy, | 
|  | .change_queue_depth = ipr_change_queue_depth, | 
|  | .change_queue_type = ipr_change_queue_type, | 
|  | .bios_param = ipr_biosparam, | 
|  | .can_queue = IPR_MAX_COMMANDS, | 
|  | .this_id = -1, | 
|  | .sg_tablesize = IPR_MAX_SGLIST, | 
|  | .max_sectors = IPR_IOA_MAX_SECTORS, | 
|  | .cmd_per_lun = IPR_MAX_CMD_PER_LUN, | 
|  | .use_clustering = ENABLE_CLUSTERING, | 
|  | .shost_attrs = ipr_ioa_attrs, | 
|  | .sdev_attrs = ipr_dev_attrs, | 
|  | .proc_name = IPR_NAME, | 
|  | .no_write_same = 1, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_ata_phy_reset - libata phy_reset handler | 
|  | * @ap:		ata port to reset | 
|  | * | 
|  | **/ | 
|  | static void ipr_ata_phy_reset(struct ata_port *ap) | 
|  | { | 
|  | unsigned long flags; | 
|  | struct ipr_sata_port *sata_port = ap->private_data; | 
|  | struct ipr_resource_entry *res = sata_port->res; | 
|  | struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg; | 
|  | int rc; | 
|  |  | 
|  | ENTER; | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, flags); | 
|  | while (ioa_cfg->in_reset_reload) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, flags); | 
|  | } | 
|  |  | 
|  | if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) | 
|  | goto out_unlock; | 
|  |  | 
|  | rc = ipr_device_reset(ioa_cfg, res); | 
|  |  | 
|  | if (rc) { | 
|  | ap->link.device[0].class = ATA_DEV_NONE; | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | ap->link.device[0].class = res->ata_class; | 
|  | if (ap->link.device[0].class == ATA_DEV_UNKNOWN) | 
|  | ap->link.device[0].class = ATA_DEV_NONE; | 
|  |  | 
|  | out_unlock: | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ata_post_internal - Cleanup after an internal command | 
|  | * @qc:	ATA queued command | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_ata_post_internal(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ipr_sata_port *sata_port = qc->ap->private_data; | 
|  | struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg; | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_hrr_queue *hrrq; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, flags); | 
|  | while (ioa_cfg->in_reset_reload) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, flags); | 
|  | } | 
|  |  | 
|  | for_each_hrrq(hrrq, ioa_cfg) { | 
|  | spin_lock(&hrrq->_lock); | 
|  | list_for_each_entry(ipr_cmd, &hrrq->hrrq_pending_q, queue) { | 
|  | if (ipr_cmd->qc == qc) { | 
|  | ipr_device_reset(ioa_cfg, sata_port->res); | 
|  | break; | 
|  | } | 
|  | } | 
|  | spin_unlock(&hrrq->_lock); | 
|  | } | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_copy_sata_tf - Copy a SATA taskfile to an IOA data structure | 
|  | * @regs:	destination | 
|  | * @tf:	source ATA taskfile | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_copy_sata_tf(struct ipr_ioarcb_ata_regs *regs, | 
|  | struct ata_taskfile *tf) | 
|  | { | 
|  | regs->feature = tf->feature; | 
|  | regs->nsect = tf->nsect; | 
|  | regs->lbal = tf->lbal; | 
|  | regs->lbam = tf->lbam; | 
|  | regs->lbah = tf->lbah; | 
|  | regs->device = tf->device; | 
|  | regs->command = tf->command; | 
|  | regs->hob_feature = tf->hob_feature; | 
|  | regs->hob_nsect = tf->hob_nsect; | 
|  | regs->hob_lbal = tf->hob_lbal; | 
|  | regs->hob_lbam = tf->hob_lbam; | 
|  | regs->hob_lbah = tf->hob_lbah; | 
|  | regs->ctl = tf->ctl; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_sata_done - done function for SATA commands | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function is invoked by the interrupt handler for | 
|  | * ops generated by the SCSI mid-layer to SATA devices | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_sata_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ata_queued_cmd *qc = ipr_cmd->qc; | 
|  | struct ipr_sata_port *sata_port = qc->ap->private_data; | 
|  | struct ipr_resource_entry *res = sata_port->res; | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | spin_lock(&ipr_cmd->hrrq->_lock); | 
|  | if (ipr_cmd->ioa_cfg->sis64) | 
|  | memcpy(&sata_port->ioasa, &ipr_cmd->s.ioasa64.u.gata, | 
|  | sizeof(struct ipr_ioasa_gata)); | 
|  | else | 
|  | memcpy(&sata_port->ioasa, &ipr_cmd->s.ioasa.u.gata, | 
|  | sizeof(struct ipr_ioasa_gata)); | 
|  | ipr_dump_ioasa(ioa_cfg, ipr_cmd, res); | 
|  |  | 
|  | if (be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc_specific) & IPR_ATA_DEVICE_WAS_RESET) | 
|  | scsi_report_device_reset(ioa_cfg->host, res->bus, res->target); | 
|  |  | 
|  | if (IPR_IOASC_SENSE_KEY(ioasc) > RECOVERED_ERROR) | 
|  | qc->err_mask |= __ac_err_mask(sata_port->ioasa.status); | 
|  | else | 
|  | qc->err_mask |= ac_err_mask(sata_port->ioasa.status); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | spin_unlock(&ipr_cmd->hrrq->_lock); | 
|  | ata_qc_complete(qc); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_build_ata_ioadl64 - Build an ATA scatter/gather list | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @qc:		ATA queued command | 
|  | * | 
|  | **/ | 
|  | static void ipr_build_ata_ioadl64(struct ipr_cmnd *ipr_cmd, | 
|  | struct ata_queued_cmd *qc) | 
|  | { | 
|  | u32 ioadl_flags = 0; | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_ioadl64_desc *ioadl64 = ipr_cmd->i.ata_ioadl.ioadl64; | 
|  | struct ipr_ioadl64_desc *last_ioadl64 = NULL; | 
|  | int len = qc->nbytes; | 
|  | struct scatterlist *sg; | 
|  | unsigned int si; | 
|  | dma_addr_t dma_addr = ipr_cmd->dma_addr; | 
|  |  | 
|  | if (len == 0) | 
|  | return; | 
|  |  | 
|  | if (qc->dma_dir == DMA_TO_DEVICE) { | 
|  | ioadl_flags = IPR_IOADL_FLAGS_WRITE; | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | 
|  | } else if (qc->dma_dir == DMA_FROM_DEVICE) | 
|  | ioadl_flags = IPR_IOADL_FLAGS_READ; | 
|  |  | 
|  | ioarcb->data_transfer_length = cpu_to_be32(len); | 
|  | ioarcb->ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl64_desc) * ipr_cmd->dma_use_sg); | 
|  | ioarcb->u.sis64_addr_data.data_ioadl_addr = | 
|  | cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ata_ioadl.ioadl64)); | 
|  |  | 
|  | for_each_sg(qc->sg, sg, qc->n_elem, si) { | 
|  | ioadl64->flags = cpu_to_be32(ioadl_flags); | 
|  | ioadl64->data_len = cpu_to_be32(sg_dma_len(sg)); | 
|  | ioadl64->address = cpu_to_be64(sg_dma_address(sg)); | 
|  |  | 
|  | last_ioadl64 = ioadl64; | 
|  | ioadl64++; | 
|  | } | 
|  |  | 
|  | if (likely(last_ioadl64)) | 
|  | last_ioadl64->flags |= cpu_to_be32(IPR_IOADL_FLAGS_LAST); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_build_ata_ioadl - Build an ATA scatter/gather list | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @qc:		ATA queued command | 
|  | * | 
|  | **/ | 
|  | static void ipr_build_ata_ioadl(struct ipr_cmnd *ipr_cmd, | 
|  | struct ata_queued_cmd *qc) | 
|  | { | 
|  | u32 ioadl_flags = 0; | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_ioadl_desc *ioadl = ipr_cmd->i.ioadl; | 
|  | struct ipr_ioadl_desc *last_ioadl = NULL; | 
|  | int len = qc->nbytes; | 
|  | struct scatterlist *sg; | 
|  | unsigned int si; | 
|  |  | 
|  | if (len == 0) | 
|  | return; | 
|  |  | 
|  | if (qc->dma_dir == DMA_TO_DEVICE) { | 
|  | ioadl_flags = IPR_IOADL_FLAGS_WRITE; | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | 
|  | ioarcb->data_transfer_length = cpu_to_be32(len); | 
|  | ioarcb->ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); | 
|  | } else if (qc->dma_dir == DMA_FROM_DEVICE) { | 
|  | ioadl_flags = IPR_IOADL_FLAGS_READ; | 
|  | ioarcb->read_data_transfer_length = cpu_to_be32(len); | 
|  | ioarcb->read_ioadl_len = | 
|  | cpu_to_be32(sizeof(struct ipr_ioadl_desc) * ipr_cmd->dma_use_sg); | 
|  | } | 
|  |  | 
|  | for_each_sg(qc->sg, sg, qc->n_elem, si) { | 
|  | ioadl->flags_and_data_len = cpu_to_be32(ioadl_flags | sg_dma_len(sg)); | 
|  | ioadl->address = cpu_to_be32(sg_dma_address(sg)); | 
|  |  | 
|  | last_ioadl = ioadl; | 
|  | ioadl++; | 
|  | } | 
|  |  | 
|  | if (likely(last_ioadl)) | 
|  | last_ioadl->flags_and_data_len |= cpu_to_be32(IPR_IOADL_FLAGS_LAST); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_qc_defer - Get a free ipr_cmd | 
|  | * @qc:	queued command | 
|  | * | 
|  | * Return value: | 
|  | *	0 if success | 
|  | **/ | 
|  | static int ipr_qc_defer(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ata_port *ap = qc->ap; | 
|  | struct ipr_sata_port *sata_port = ap->private_data; | 
|  | struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg; | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_hrr_queue *hrrq; | 
|  | int hrrq_id; | 
|  |  | 
|  | hrrq_id = ipr_get_hrrq_index(ioa_cfg); | 
|  | hrrq = &ioa_cfg->hrrq[hrrq_id]; | 
|  |  | 
|  | qc->lldd_task = NULL; | 
|  | spin_lock(&hrrq->_lock); | 
|  | if (unlikely(hrrq->ioa_is_dead)) { | 
|  | spin_unlock(&hrrq->_lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | if (unlikely(!hrrq->allow_cmds)) { | 
|  | spin_unlock(&hrrq->_lock); | 
|  | return ATA_DEFER_LINK; | 
|  | } | 
|  |  | 
|  | ipr_cmd = __ipr_get_free_ipr_cmnd(hrrq); | 
|  | if (ipr_cmd == NULL) { | 
|  | spin_unlock(&hrrq->_lock); | 
|  | return ATA_DEFER_LINK; | 
|  | } | 
|  |  | 
|  | qc->lldd_task = ipr_cmd; | 
|  | spin_unlock(&hrrq->_lock); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_qc_issue - Issue a SATA qc to a device | 
|  | * @qc:	queued command | 
|  | * | 
|  | * Return value: | 
|  | * 	0 if success | 
|  | **/ | 
|  | static unsigned int ipr_qc_issue(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ata_port *ap = qc->ap; | 
|  | struct ipr_sata_port *sata_port = ap->private_data; | 
|  | struct ipr_resource_entry *res = sata_port->res; | 
|  | struct ipr_ioa_cfg *ioa_cfg = sata_port->ioa_cfg; | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_ioarcb *ioarcb; | 
|  | struct ipr_ioarcb_ata_regs *regs; | 
|  |  | 
|  | if (qc->lldd_task == NULL) | 
|  | ipr_qc_defer(qc); | 
|  |  | 
|  | ipr_cmd = qc->lldd_task; | 
|  | if (ipr_cmd == NULL) | 
|  | return AC_ERR_SYSTEM; | 
|  |  | 
|  | qc->lldd_task = NULL; | 
|  | spin_lock(&ipr_cmd->hrrq->_lock); | 
|  | if (unlikely(!ipr_cmd->hrrq->allow_cmds || | 
|  | ipr_cmd->hrrq->ioa_is_dead)) { | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | spin_unlock(&ipr_cmd->hrrq->_lock); | 
|  | return AC_ERR_SYSTEM; | 
|  | } | 
|  |  | 
|  | ipr_init_ipr_cmnd(ipr_cmd, ipr_lock_and_done); | 
|  | ioarcb = &ipr_cmd->ioarcb; | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | regs = &ipr_cmd->i.ata_ioadl.regs; | 
|  | ioarcb->add_cmd_parms_offset = cpu_to_be16(sizeof(*ioarcb)); | 
|  | } else | 
|  | regs = &ioarcb->u.add_data.u.regs; | 
|  |  | 
|  | memset(regs, 0, sizeof(*regs)); | 
|  | ioarcb->add_cmd_parms_len = cpu_to_be16(sizeof(*regs)); | 
|  |  | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_pending_q); | 
|  | ipr_cmd->qc = qc; | 
|  | ipr_cmd->done = ipr_sata_done; | 
|  | ipr_cmd->ioarcb.res_handle = res->res_handle; | 
|  | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_ATA_PASSTHRU; | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_LINK_DESC; | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_NO_ULEN_CHK; | 
|  | ipr_cmd->dma_use_sg = qc->n_elem; | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | ipr_build_ata_ioadl64(ipr_cmd, qc); | 
|  | else | 
|  | ipr_build_ata_ioadl(ipr_cmd, qc); | 
|  |  | 
|  | regs->flags |= IPR_ATA_FLAG_STATUS_ON_GOOD_COMPLETION; | 
|  | ipr_copy_sata_tf(regs, &qc->tf); | 
|  | memcpy(ioarcb->cmd_pkt.cdb, qc->cdb, IPR_MAX_CDB_LEN); | 
|  | ipr_trc_hook(ipr_cmd, IPR_TRACE_START, IPR_GET_RES_PHYS_LOC(res)); | 
|  |  | 
|  | switch (qc->tf.protocol) { | 
|  | case ATA_PROT_NODATA: | 
|  | case ATA_PROT_PIO: | 
|  | break; | 
|  |  | 
|  | case ATA_PROT_DMA: | 
|  | regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA; | 
|  | break; | 
|  |  | 
|  | case ATAPI_PROT_PIO: | 
|  | case ATAPI_PROT_NODATA: | 
|  | regs->flags |= IPR_ATA_FLAG_PACKET_CMD; | 
|  | break; | 
|  |  | 
|  | case ATAPI_PROT_DMA: | 
|  | regs->flags |= IPR_ATA_FLAG_PACKET_CMD; | 
|  | regs->flags |= IPR_ATA_FLAG_XFER_TYPE_DMA; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | WARN_ON(1); | 
|  | spin_unlock(&ipr_cmd->hrrq->_lock); | 
|  | return AC_ERR_INVALID; | 
|  | } | 
|  |  | 
|  | ipr_send_command(ipr_cmd); | 
|  | spin_unlock(&ipr_cmd->hrrq->_lock); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_qc_fill_rtf - Read result TF | 
|  | * @qc: ATA queued command | 
|  | * | 
|  | * Return value: | 
|  | * 	true | 
|  | **/ | 
|  | static bool ipr_qc_fill_rtf(struct ata_queued_cmd *qc) | 
|  | { | 
|  | struct ipr_sata_port *sata_port = qc->ap->private_data; | 
|  | struct ipr_ioasa_gata *g = &sata_port->ioasa; | 
|  | struct ata_taskfile *tf = &qc->result_tf; | 
|  |  | 
|  | tf->feature = g->error; | 
|  | tf->nsect = g->nsect; | 
|  | tf->lbal = g->lbal; | 
|  | tf->lbam = g->lbam; | 
|  | tf->lbah = g->lbah; | 
|  | tf->device = g->device; | 
|  | tf->command = g->status; | 
|  | tf->hob_nsect = g->hob_nsect; | 
|  | tf->hob_lbal = g->hob_lbal; | 
|  | tf->hob_lbam = g->hob_lbam; | 
|  | tf->hob_lbah = g->hob_lbah; | 
|  |  | 
|  | return true; | 
|  | } | 
|  |  | 
|  | static struct ata_port_operations ipr_sata_ops = { | 
|  | .phy_reset = ipr_ata_phy_reset, | 
|  | .hardreset = ipr_sata_reset, | 
|  | .post_internal_cmd = ipr_ata_post_internal, | 
|  | .qc_prep = ata_noop_qc_prep, | 
|  | .qc_defer = ipr_qc_defer, | 
|  | .qc_issue = ipr_qc_issue, | 
|  | .qc_fill_rtf = ipr_qc_fill_rtf, | 
|  | .port_start = ata_sas_port_start, | 
|  | .port_stop = ata_sas_port_stop | 
|  | }; | 
|  |  | 
|  | static struct ata_port_info sata_port_info = { | 
|  | .flags		= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA, | 
|  | .pio_mask	= ATA_PIO4_ONLY, | 
|  | .mwdma_mask	= ATA_MWDMA2, | 
|  | .udma_mask	= ATA_UDMA6, | 
|  | .port_ops	= &ipr_sata_ops | 
|  | }; | 
|  |  | 
|  | #ifdef CONFIG_PPC_PSERIES | 
|  | static const u16 ipr_blocked_processors[] = { | 
|  | PVR_NORTHSTAR, | 
|  | PVR_PULSAR, | 
|  | PVR_POWER4, | 
|  | PVR_ICESTAR, | 
|  | PVR_SSTAR, | 
|  | PVR_POWER4p, | 
|  | PVR_630, | 
|  | PVR_630p | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_invalid_adapter - Determine if this adapter is supported on this hardware | 
|  | * @ioa_cfg:	ioa cfg struct | 
|  | * | 
|  | * Adapters that use Gemstone revision < 3.1 do not work reliably on | 
|  | * certain pSeries hardware. This function determines if the given | 
|  | * adapter is in one of these confgurations or not. | 
|  | * | 
|  | * Return value: | 
|  | * 	1 if adapter is not supported / 0 if adapter is supported | 
|  | **/ | 
|  | static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if ((ioa_cfg->type == 0x5702) && (ioa_cfg->pdev->revision < 4)) { | 
|  | for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++) { | 
|  | if (pvr_version_is(ipr_blocked_processors[i])) | 
|  | return 1; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  | #else | 
|  | #define ipr_invalid_adapter(ioa_cfg) 0 | 
|  | #endif | 
|  |  | 
|  | /** | 
|  | * ipr_ioa_bringdown_done - IOA bring down completion. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function processes the completion of an adapter bring down. | 
|  | * It wakes any reset sleepers. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioa_bringdown_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | int i; | 
|  |  | 
|  | ENTER; | 
|  | if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) { | 
|  | ipr_trace; | 
|  | spin_unlock_irq(ioa_cfg->host->host_lock); | 
|  | scsi_unblock_requests(ioa_cfg->host); | 
|  | spin_lock_irq(ioa_cfg->host->host_lock); | 
|  | } | 
|  |  | 
|  | ioa_cfg->in_reset_reload = 0; | 
|  | ioa_cfg->reset_retries = 0; | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | spin_lock(&ioa_cfg->hrrq[i]._lock); | 
|  | ioa_cfg->hrrq[i].ioa_is_dead = 1; | 
|  | spin_unlock(&ioa_cfg->hrrq[i]._lock); | 
|  | } | 
|  | wmb(); | 
|  |  | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | wake_up_all(&ioa_cfg->reset_wait_q); | 
|  | LEAVE; | 
|  |  | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioa_reset_done - IOA reset completion. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function processes the completion of an adapter reset. | 
|  | * It schedules any necessary mid-layer add/removes and | 
|  | * wakes any reset sleepers. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioa_reset_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_resource_entry *res; | 
|  | struct ipr_hostrcb *hostrcb, *temp; | 
|  | int i = 0, j; | 
|  |  | 
|  | ENTER; | 
|  | ioa_cfg->in_reset_reload = 0; | 
|  | for (j = 0; j < ioa_cfg->hrrq_num; j++) { | 
|  | spin_lock(&ioa_cfg->hrrq[j]._lock); | 
|  | ioa_cfg->hrrq[j].allow_cmds = 1; | 
|  | spin_unlock(&ioa_cfg->hrrq[j]._lock); | 
|  | } | 
|  | wmb(); | 
|  | ioa_cfg->reset_cmd = NULL; | 
|  | ioa_cfg->doorbell |= IPR_RUNTIME_RESET; | 
|  |  | 
|  | list_for_each_entry(res, &ioa_cfg->used_res_q, queue) { | 
|  | if (ioa_cfg->allow_ml_add_del && (res->add_to_ml || res->del_from_ml)) { | 
|  | ipr_trace; | 
|  | break; | 
|  | } | 
|  | } | 
|  | schedule_work(&ioa_cfg->work_q); | 
|  |  | 
|  | list_for_each_entry_safe(hostrcb, temp, &ioa_cfg->hostrcb_free_q, queue) { | 
|  | list_del(&hostrcb->queue); | 
|  | if (i++ < IPR_NUM_LOG_HCAMS) | 
|  | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_LOG_DATA, hostrcb); | 
|  | else | 
|  | ipr_send_hcam(ioa_cfg, IPR_HCAM_CDB_OP_CODE_CONFIG_CHANGE, hostrcb); | 
|  | } | 
|  |  | 
|  | scsi_report_bus_reset(ioa_cfg->host, IPR_VSET_BUS); | 
|  | dev_info(&ioa_cfg->pdev->dev, "IOA initialized.\n"); | 
|  |  | 
|  | ioa_cfg->reset_retries = 0; | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | wake_up_all(&ioa_cfg->reset_wait_q); | 
|  |  | 
|  | spin_unlock(ioa_cfg->host->host_lock); | 
|  | scsi_unblock_requests(ioa_cfg->host); | 
|  | spin_lock(ioa_cfg->host->host_lock); | 
|  |  | 
|  | if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) | 
|  | scsi_block_requests(ioa_cfg->host); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_set_sup_dev_dflt - Initialize a Set Supported Device buffer | 
|  | * @supported_dev:	supported device struct | 
|  | * @vpids:			vendor product id struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_set_sup_dev_dflt(struct ipr_supported_device *supported_dev, | 
|  | struct ipr_std_inq_vpids *vpids) | 
|  | { | 
|  | memset(supported_dev, 0, sizeof(struct ipr_supported_device)); | 
|  | memcpy(&supported_dev->vpids, vpids, sizeof(struct ipr_std_inq_vpids)); | 
|  | supported_dev->num_records = 1; | 
|  | supported_dev->data_length = | 
|  | cpu_to_be16(sizeof(struct ipr_supported_device)); | 
|  | supported_dev->reserved = 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_set_supported_devs - Send Set Supported Devices for a device | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function sends a Set Supported Devices to the adapter | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_set_supported_devs(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_supported_device *supp_dev = &ioa_cfg->vpd_cbs->supp_dev; | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_resource_entry *res = ipr_cmd->u.res; | 
|  |  | 
|  | ipr_cmd->job_step = ipr_ioa_reset_done; | 
|  |  | 
|  | list_for_each_entry_continue(res, &ioa_cfg->used_res_q, queue) { | 
|  | if (!ipr_is_scsi_disk(res)) | 
|  | continue; | 
|  |  | 
|  | ipr_cmd->u.res = res; | 
|  | ipr_set_sup_dev_dflt(supp_dev, &res->std_inq_data.vpids); | 
|  |  | 
|  | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | 
|  | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | 
|  |  | 
|  | ioarcb->cmd_pkt.cdb[0] = IPR_SET_SUPPORTED_DEVICES; | 
|  | ioarcb->cmd_pkt.cdb[1] = IPR_SET_ALL_SUPPORTED_DEVICES; | 
|  | ioarcb->cmd_pkt.cdb[7] = (sizeof(struct ipr_supported_device) >> 8) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[8] = sizeof(struct ipr_supported_device) & 0xff; | 
|  |  | 
|  | ipr_init_ioadl(ipr_cmd, | 
|  | ioa_cfg->vpd_cbs_dma + | 
|  | offsetof(struct ipr_misc_cbs, supp_dev), | 
|  | sizeof(struct ipr_supported_device), | 
|  | IPR_IOADL_FLAGS_WRITE_LAST); | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, | 
|  | IPR_SET_SUP_DEVICE_TIMEOUT); | 
|  |  | 
|  | if (!ioa_cfg->sis64) | 
|  | ipr_cmd->job_step = ipr_set_supported_devs; | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_mode_page - Locate specified mode page | 
|  | * @mode_pages:	mode page buffer | 
|  | * @page_code:	page code to find | 
|  | * @len:		minimum required length for mode page | 
|  | * | 
|  | * Return value: | 
|  | * 	pointer to mode page / NULL on failure | 
|  | **/ | 
|  | static void *ipr_get_mode_page(struct ipr_mode_pages *mode_pages, | 
|  | u32 page_code, u32 len) | 
|  | { | 
|  | struct ipr_mode_page_hdr *mode_hdr; | 
|  | u32 page_length; | 
|  | u32 length; | 
|  |  | 
|  | if (!mode_pages || (mode_pages->hdr.length == 0)) | 
|  | return NULL; | 
|  |  | 
|  | length = (mode_pages->hdr.length + 1) - 4 - mode_pages->hdr.block_desc_len; | 
|  | mode_hdr = (struct ipr_mode_page_hdr *) | 
|  | (mode_pages->data + mode_pages->hdr.block_desc_len); | 
|  |  | 
|  | while (length) { | 
|  | if (IPR_GET_MODE_PAGE_CODE(mode_hdr) == page_code) { | 
|  | if (mode_hdr->page_length >= (len - sizeof(struct ipr_mode_page_hdr))) | 
|  | return mode_hdr; | 
|  | break; | 
|  | } else { | 
|  | page_length = (sizeof(struct ipr_mode_page_hdr) + | 
|  | mode_hdr->page_length); | 
|  | length -= page_length; | 
|  | mode_hdr = (struct ipr_mode_page_hdr *) | 
|  | ((unsigned long)mode_hdr + page_length); | 
|  | } | 
|  | } | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_check_term_power - Check for term power errors | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @mode_pages:	IOAFP mode pages buffer | 
|  | * | 
|  | * Check the IOAFP's mode page 28 for term power errors | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_check_term_power(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_mode_pages *mode_pages) | 
|  | { | 
|  | int i; | 
|  | int entry_length; | 
|  | struct ipr_dev_bus_entry *bus; | 
|  | struct ipr_mode_page28 *mode_page; | 
|  |  | 
|  | mode_page = ipr_get_mode_page(mode_pages, 0x28, | 
|  | sizeof(struct ipr_mode_page28)); | 
|  |  | 
|  | entry_length = mode_page->entry_length; | 
|  |  | 
|  | bus = mode_page->bus; | 
|  |  | 
|  | for (i = 0; i < mode_page->num_entries; i++) { | 
|  | if (bus->flags & IPR_SCSI_ATTR_NO_TERM_PWR) { | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Term power is absent on scsi bus %d\n", | 
|  | bus->res_addr.bus); | 
|  | } | 
|  |  | 
|  | bus = (struct ipr_dev_bus_entry *)((char *)bus + entry_length); | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_scsi_bus_speed_limit - Limit the SCSI speed based on SES table | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Looks through the config table checking for SES devices. If | 
|  | * the SES device is in the SES table indicating a maximum SCSI | 
|  | * bus speed, the speed is limited for the bus. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_scsi_bus_speed_limit(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | u32 max_xfer_rate; | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < IPR_MAX_NUM_BUSES; i++) { | 
|  | max_xfer_rate = ipr_get_max_scsi_speed(ioa_cfg, i, | 
|  | ioa_cfg->bus_attr[i].bus_width); | 
|  |  | 
|  | if (max_xfer_rate < ioa_cfg->bus_attr[i].max_xfer_rate) | 
|  | ioa_cfg->bus_attr[i].max_xfer_rate = max_xfer_rate; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_modify_ioafp_mode_page_28 - Modify IOAFP Mode Page 28 | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @mode_pages:	mode page 28 buffer | 
|  | * | 
|  | * Updates mode page 28 based on driver configuration | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_modify_ioafp_mode_page_28(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct ipr_mode_pages *mode_pages) | 
|  | { | 
|  | int i, entry_length; | 
|  | struct ipr_dev_bus_entry *bus; | 
|  | struct ipr_bus_attributes *bus_attr; | 
|  | struct ipr_mode_page28 *mode_page; | 
|  |  | 
|  | mode_page = ipr_get_mode_page(mode_pages, 0x28, | 
|  | sizeof(struct ipr_mode_page28)); | 
|  |  | 
|  | entry_length = mode_page->entry_length; | 
|  |  | 
|  | /* Loop for each device bus entry */ | 
|  | for (i = 0, bus = mode_page->bus; | 
|  | i < mode_page->num_entries; | 
|  | i++, bus = (struct ipr_dev_bus_entry *)((u8 *)bus + entry_length)) { | 
|  | if (bus->res_addr.bus > IPR_MAX_NUM_BUSES) { | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Invalid resource address reported: 0x%08X\n", | 
|  | IPR_GET_PHYS_LOC(bus->res_addr)); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | bus_attr = &ioa_cfg->bus_attr[i]; | 
|  | bus->extended_reset_delay = IPR_EXTENDED_RESET_DELAY; | 
|  | bus->bus_width = bus_attr->bus_width; | 
|  | bus->max_xfer_rate = cpu_to_be32(bus_attr->max_xfer_rate); | 
|  | bus->flags &= ~IPR_SCSI_ATTR_QAS_MASK; | 
|  | if (bus_attr->qas_enabled) | 
|  | bus->flags |= IPR_SCSI_ATTR_ENABLE_QAS; | 
|  | else | 
|  | bus->flags |= IPR_SCSI_ATTR_DISABLE_QAS; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_build_mode_select - Build a mode select command | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @res_handle:	resource handle to send command to | 
|  | * @parm:		Byte 2 of Mode Sense command | 
|  | * @dma_addr:	DMA buffer address | 
|  | * @xfer_len:	data transfer length | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_build_mode_select(struct ipr_cmnd *ipr_cmd, | 
|  | __be32 res_handle, u8 parm, | 
|  | dma_addr_t dma_addr, u8 xfer_len) | 
|  | { | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  |  | 
|  | ioarcb->res_handle = res_handle; | 
|  | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB; | 
|  | ioarcb->cmd_pkt.flags_hi |= IPR_FLAGS_HI_WRITE_NOT_READ; | 
|  | ioarcb->cmd_pkt.cdb[0] = MODE_SELECT; | 
|  | ioarcb->cmd_pkt.cdb[1] = parm; | 
|  | ioarcb->cmd_pkt.cdb[4] = xfer_len; | 
|  |  | 
|  | ipr_init_ioadl(ipr_cmd, dma_addr, xfer_len, IPR_IOADL_FLAGS_WRITE_LAST); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_mode_select_page28 - Issue Mode Select Page 28 to IOA | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function sets up the SCSI bus attributes and sends | 
|  | * a Mode Select for Page 28 to activate them. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_mode_select_page28(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_mode_pages *mode_pages = &ioa_cfg->vpd_cbs->mode_pages; | 
|  | int length; | 
|  |  | 
|  | ENTER; | 
|  | ipr_scsi_bus_speed_limit(ioa_cfg); | 
|  | ipr_check_term_power(ioa_cfg, mode_pages); | 
|  | ipr_modify_ioafp_mode_page_28(ioa_cfg, mode_pages); | 
|  | length = mode_pages->hdr.length + 1; | 
|  | mode_pages->hdr.length = 0; | 
|  |  | 
|  | ipr_build_mode_select(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), 0x11, | 
|  | ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages), | 
|  | length); | 
|  |  | 
|  | ipr_cmd->job_step = ipr_set_supported_devs; | 
|  | ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next, | 
|  | struct ipr_resource_entry, queue); | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_build_mode_sense - Builds a mode sense command | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @res:		resource entry struct | 
|  | * @parm:		Byte 2 of mode sense command | 
|  | * @dma_addr:	DMA address of mode sense buffer | 
|  | * @xfer_len:	Size of DMA buffer | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_build_mode_sense(struct ipr_cmnd *ipr_cmd, | 
|  | __be32 res_handle, | 
|  | u8 parm, dma_addr_t dma_addr, u8 xfer_len) | 
|  | { | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  |  | 
|  | ioarcb->res_handle = res_handle; | 
|  | ioarcb->cmd_pkt.cdb[0] = MODE_SENSE; | 
|  | ioarcb->cmd_pkt.cdb[2] = parm; | 
|  | ioarcb->cmd_pkt.cdb[4] = xfer_len; | 
|  | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB; | 
|  |  | 
|  | ipr_init_ioadl(ipr_cmd, dma_addr, xfer_len, IPR_IOADL_FLAGS_READ_LAST); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_cmd_failed - Handle failure of IOA reset command | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function handles the failure of an IOA bringup command. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_cmd_failed(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "0x%02X failed with IOASC: 0x%08X\n", | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[0], ioasc); | 
|  |  | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_mode_sense_failed - Handle failure of IOAFP mode sense | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function handles the failure of a Mode Sense to the IOAFP. | 
|  | * Some adapters do not handle all mode pages. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_mode_sense_failed(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT) { | 
|  | ipr_cmd->job_step = ipr_set_supported_devs; | 
|  | ipr_cmd->u.res = list_entry(ioa_cfg->used_res_q.next, | 
|  | struct ipr_resource_entry, queue); | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | return ipr_reset_cmd_failed(ipr_cmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_mode_sense_page28 - Issue Mode Sense Page 28 to IOA | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function send a Page 28 mode sense to the IOA to | 
|  | * retrieve SCSI bus attributes. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_mode_sense_page28(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | ENTER; | 
|  | ipr_build_mode_sense(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), | 
|  | 0x28, ioa_cfg->vpd_cbs_dma + | 
|  | offsetof(struct ipr_misc_cbs, mode_pages), | 
|  | sizeof(struct ipr_mode_pages)); | 
|  |  | 
|  | ipr_cmd->job_step = ipr_ioafp_mode_select_page28; | 
|  | ipr_cmd->job_step_failed = ipr_reset_mode_sense_failed; | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_mode_select_page24 - Issue Mode Select to IOA | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function enables dual IOA RAID support if possible. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_mode_select_page24(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_mode_pages *mode_pages = &ioa_cfg->vpd_cbs->mode_pages; | 
|  | struct ipr_mode_page24 *mode_page; | 
|  | int length; | 
|  |  | 
|  | ENTER; | 
|  | mode_page = ipr_get_mode_page(mode_pages, 0x24, | 
|  | sizeof(struct ipr_mode_page24)); | 
|  |  | 
|  | if (mode_page) | 
|  | mode_page->flags |= IPR_ENABLE_DUAL_IOA_AF; | 
|  |  | 
|  | length = mode_pages->hdr.length + 1; | 
|  | mode_pages->hdr.length = 0; | 
|  |  | 
|  | ipr_build_mode_select(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), 0x11, | 
|  | ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, mode_pages), | 
|  | length); | 
|  |  | 
|  | ipr_cmd->job_step = ipr_ioafp_mode_sense_page28; | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_mode_sense_page24_failed - Handle failure of IOAFP mode sense | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function handles the failure of a Mode Sense to the IOAFP. | 
|  | * Some adapters do not handle all mode pages. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_mode_sense_page24_failed(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | u32 ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | if (ioasc == IPR_IOASC_IR_INVALID_REQ_TYPE_OR_PKT) { | 
|  | ipr_cmd->job_step = ipr_ioafp_mode_sense_page28; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | return ipr_reset_cmd_failed(ipr_cmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_mode_sense_page24 - Issue Page 24 Mode Sense to IOA | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function send a mode sense to the IOA to retrieve | 
|  | * the IOA Advanced Function Control mode page. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_mode_sense_page24(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | ENTER; | 
|  | ipr_build_mode_sense(ipr_cmd, cpu_to_be32(IPR_IOA_RES_HANDLE), | 
|  | 0x24, ioa_cfg->vpd_cbs_dma + | 
|  | offsetof(struct ipr_misc_cbs, mode_pages), | 
|  | sizeof(struct ipr_mode_pages)); | 
|  |  | 
|  | ipr_cmd->job_step = ipr_ioafp_mode_select_page24; | 
|  | ipr_cmd->job_step_failed = ipr_reset_mode_sense_page24_failed; | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_init_res_table - Initialize the resource table | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function looks through the existing resource table, comparing | 
|  | * it with the config table. This function will take care of old/new | 
|  | * devices and schedule adding/removing them from the mid-layer | 
|  | * as appropriate. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE | 
|  | **/ | 
|  | static int ipr_init_res_table(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_resource_entry *res, *temp; | 
|  | struct ipr_config_table_entry_wrapper cfgtew; | 
|  | int entries, found, flag, i; | 
|  | LIST_HEAD(old_res); | 
|  |  | 
|  | ENTER; | 
|  | if (ioa_cfg->sis64) | 
|  | flag = ioa_cfg->u.cfg_table64->hdr64.flags; | 
|  | else | 
|  | flag = ioa_cfg->u.cfg_table->hdr.flags; | 
|  |  | 
|  | if (flag & IPR_UCODE_DOWNLOAD_REQ) | 
|  | dev_err(&ioa_cfg->pdev->dev, "Microcode download required\n"); | 
|  |  | 
|  | list_for_each_entry_safe(res, temp, &ioa_cfg->used_res_q, queue) | 
|  | list_move_tail(&res->queue, &old_res); | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | entries = be16_to_cpu(ioa_cfg->u.cfg_table64->hdr64.num_entries); | 
|  | else | 
|  | entries = ioa_cfg->u.cfg_table->hdr.num_entries; | 
|  |  | 
|  | for (i = 0; i < entries; i++) { | 
|  | if (ioa_cfg->sis64) | 
|  | cfgtew.u.cfgte64 = &ioa_cfg->u.cfg_table64->dev[i]; | 
|  | else | 
|  | cfgtew.u.cfgte = &ioa_cfg->u.cfg_table->dev[i]; | 
|  | found = 0; | 
|  |  | 
|  | list_for_each_entry_safe(res, temp, &old_res, queue) { | 
|  | if (ipr_is_same_device(res, &cfgtew)) { | 
|  | list_move_tail(&res->queue, &ioa_cfg->used_res_q); | 
|  | found = 1; | 
|  | break; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!found) { | 
|  | if (list_empty(&ioa_cfg->free_res_q)) { | 
|  | dev_err(&ioa_cfg->pdev->dev, "Too many devices attached\n"); | 
|  | break; | 
|  | } | 
|  |  | 
|  | found = 1; | 
|  | res = list_entry(ioa_cfg->free_res_q.next, | 
|  | struct ipr_resource_entry, queue); | 
|  | list_move_tail(&res->queue, &ioa_cfg->used_res_q); | 
|  | ipr_init_res_entry(res, &cfgtew); | 
|  | res->add_to_ml = 1; | 
|  | } else if (res->sdev && (ipr_is_vset_device(res) || ipr_is_scsi_disk(res))) | 
|  | res->sdev->allow_restart = 1; | 
|  |  | 
|  | if (found) | 
|  | ipr_update_res_entry(res, &cfgtew); | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(res, temp, &old_res, queue) { | 
|  | if (res->sdev) { | 
|  | res->del_from_ml = 1; | 
|  | res->res_handle = IPR_INVALID_RES_HANDLE; | 
|  | list_move_tail(&res->queue, &ioa_cfg->used_res_q); | 
|  | } | 
|  | } | 
|  |  | 
|  | list_for_each_entry_safe(res, temp, &old_res, queue) { | 
|  | ipr_clear_res_target(res); | 
|  | list_move_tail(&res->queue, &ioa_cfg->free_res_q); | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->dual_raid && ipr_dual_ioa_raid) | 
|  | ipr_cmd->job_step = ipr_ioafp_mode_sense_page24; | 
|  | else | 
|  | ipr_cmd->job_step = ipr_ioafp_mode_sense_page28; | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_query_ioa_cfg - Send a Query IOA Config to the adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function sends a Query IOA Configuration command | 
|  | * to the adapter to retrieve the IOA configuration table. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_query_ioa_cfg(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_inquiry_page3 *ucode_vpd = &ioa_cfg->vpd_cbs->page3_data; | 
|  | struct ipr_inquiry_cap *cap = &ioa_cfg->vpd_cbs->cap; | 
|  |  | 
|  | ENTER; | 
|  | if (cap->cap & IPR_CAP_DUAL_IOA_RAID) | 
|  | ioa_cfg->dual_raid = 1; | 
|  | dev_info(&ioa_cfg->pdev->dev, "Adapter firmware version: %02X%02X%02X%02X\n", | 
|  | ucode_vpd->major_release, ucode_vpd->card_type, | 
|  | ucode_vpd->minor_release[0], ucode_vpd->minor_release[1]); | 
|  | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | 
|  | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | 
|  |  | 
|  | ioarcb->cmd_pkt.cdb[0] = IPR_QUERY_IOA_CONFIG; | 
|  | ioarcb->cmd_pkt.cdb[6] = (ioa_cfg->cfg_table_size >> 16) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[7] = (ioa_cfg->cfg_table_size >> 8) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[8] = ioa_cfg->cfg_table_size & 0xff; | 
|  |  | 
|  | ipr_init_ioadl(ipr_cmd, ioa_cfg->cfg_table_dma, ioa_cfg->cfg_table_size, | 
|  | IPR_IOADL_FLAGS_READ_LAST); | 
|  |  | 
|  | ipr_cmd->job_step = ipr_init_res_table; | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_inquiry - Send an Inquiry to the adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This utility function sends an inquiry to the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_ioafp_inquiry(struct ipr_cmnd *ipr_cmd, u8 flags, u8 page, | 
|  | dma_addr_t dma_addr, u8 xfer_len) | 
|  | { | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  |  | 
|  | ENTER; | 
|  | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_SCSICDB; | 
|  | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | 
|  |  | 
|  | ioarcb->cmd_pkt.cdb[0] = INQUIRY; | 
|  | ioarcb->cmd_pkt.cdb[1] = flags; | 
|  | ioarcb->cmd_pkt.cdb[2] = page; | 
|  | ioarcb->cmd_pkt.cdb[4] = xfer_len; | 
|  |  | 
|  | ipr_init_ioadl(ipr_cmd, dma_addr, xfer_len, IPR_IOADL_FLAGS_READ_LAST); | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, IPR_INTERNAL_TIMEOUT); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_inquiry_page_supported - Is the given inquiry page supported | 
|  | * @page0:		inquiry page 0 buffer | 
|  | * @page:		page code. | 
|  | * | 
|  | * This function determines if the specified inquiry page is supported. | 
|  | * | 
|  | * Return value: | 
|  | *	1 if page is supported / 0 if not | 
|  | **/ | 
|  | static int ipr_inquiry_page_supported(struct ipr_inquiry_page0 *page0, u8 page) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < min_t(u8, page0->len, IPR_INQUIRY_PAGE0_ENTRIES); i++) | 
|  | if (page0->page[i] == page) | 
|  | return 1; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_cap_inquiry - Send a Page 0xD0 Inquiry to the adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function sends a Page 0xD0 inquiry to the adapter | 
|  | * to retrieve adapter capabilities. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_cap_inquiry(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_inquiry_page0 *page0 = &ioa_cfg->vpd_cbs->page0_data; | 
|  | struct ipr_inquiry_cap *cap = &ioa_cfg->vpd_cbs->cap; | 
|  |  | 
|  | ENTER; | 
|  | ipr_cmd->job_step = ipr_ioafp_query_ioa_cfg; | 
|  | memset(cap, 0, sizeof(*cap)); | 
|  |  | 
|  | if (ipr_inquiry_page_supported(page0, 0xD0)) { | 
|  | ipr_ioafp_inquiry(ipr_cmd, 1, 0xD0, | 
|  | ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, cap), | 
|  | sizeof(struct ipr_inquiry_cap)); | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_page3_inquiry - Send a Page 3 Inquiry to the adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function sends a Page 3 inquiry to the adapter | 
|  | * to retrieve software VPD information. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_page3_inquiry(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | ENTER; | 
|  |  | 
|  | ipr_cmd->job_step = ipr_ioafp_cap_inquiry; | 
|  |  | 
|  | ipr_ioafp_inquiry(ipr_cmd, 1, 3, | 
|  | ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page3_data), | 
|  | sizeof(struct ipr_inquiry_page3)); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_page0_inquiry - Send a Page 0 Inquiry to the adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function sends a Page 0 inquiry to the adapter | 
|  | * to retrieve supported inquiry pages. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_page0_inquiry(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | char type[5]; | 
|  |  | 
|  | ENTER; | 
|  |  | 
|  | /* Grab the type out of the VPD and store it away */ | 
|  | memcpy(type, ioa_cfg->vpd_cbs->ioa_vpd.std_inq_data.vpids.product_id, 4); | 
|  | type[4] = '\0'; | 
|  | ioa_cfg->type = simple_strtoul((char *)type, NULL, 16); | 
|  |  | 
|  | ipr_cmd->job_step = ipr_ioafp_page3_inquiry; | 
|  |  | 
|  | ipr_ioafp_inquiry(ipr_cmd, 1, 0, | 
|  | ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, page0_data), | 
|  | sizeof(struct ipr_inquiry_page0)); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_std_inquiry - Send a Standard Inquiry to the adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function sends a standard inquiry to the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_std_inquiry(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | ENTER; | 
|  | ipr_cmd->job_step = ipr_ioafp_page0_inquiry; | 
|  |  | 
|  | ipr_ioafp_inquiry(ipr_cmd, 0, 0, | 
|  | ioa_cfg->vpd_cbs_dma + offsetof(struct ipr_misc_cbs, ioa_vpd), | 
|  | sizeof(struct ipr_ioa_vpd)); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_ioafp_identify_hrrq - Send Identify Host RRQ. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function send an Identify Host Request Response Queue | 
|  | * command to establish the HRRQ with the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_ioafp_identify_hrrq(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_ioarcb *ioarcb = &ipr_cmd->ioarcb; | 
|  | struct ipr_hrr_queue *hrrq; | 
|  |  | 
|  | ENTER; | 
|  | ipr_cmd->job_step = ipr_ioafp_std_inquiry; | 
|  | dev_info(&ioa_cfg->pdev->dev, "Starting IOA initialization sequence.\n"); | 
|  |  | 
|  | if (ioa_cfg->identify_hrrq_index < ioa_cfg->hrrq_num) { | 
|  | hrrq = &ioa_cfg->hrrq[ioa_cfg->identify_hrrq_index]; | 
|  |  | 
|  | ioarcb->cmd_pkt.cdb[0] = IPR_ID_HOST_RR_Q; | 
|  | ioarcb->res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | 
|  |  | 
|  | ioarcb->cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | 
|  | if (ioa_cfg->sis64) | 
|  | ioarcb->cmd_pkt.cdb[1] = 0x1; | 
|  |  | 
|  | if (ioa_cfg->nvectors == 1) | 
|  | ioarcb->cmd_pkt.cdb[1] &= ~IPR_ID_HRRQ_SELE_ENABLE; | 
|  | else | 
|  | ioarcb->cmd_pkt.cdb[1] |= IPR_ID_HRRQ_SELE_ENABLE; | 
|  |  | 
|  | ioarcb->cmd_pkt.cdb[2] = | 
|  | ((u64) hrrq->host_rrq_dma >> 24) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[3] = | 
|  | ((u64) hrrq->host_rrq_dma >> 16) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[4] = | 
|  | ((u64) hrrq->host_rrq_dma >> 8) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[5] = | 
|  | ((u64) hrrq->host_rrq_dma) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[7] = | 
|  | ((sizeof(u32) * hrrq->size) >> 8) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[8] = | 
|  | (sizeof(u32) * hrrq->size) & 0xff; | 
|  |  | 
|  | if (ioarcb->cmd_pkt.cdb[1] & IPR_ID_HRRQ_SELE_ENABLE) | 
|  | ioarcb->cmd_pkt.cdb[9] = | 
|  | ioa_cfg->identify_hrrq_index; | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | ioarcb->cmd_pkt.cdb[10] = | 
|  | ((u64) hrrq->host_rrq_dma >> 56) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[11] = | 
|  | ((u64) hrrq->host_rrq_dma >> 48) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[12] = | 
|  | ((u64) hrrq->host_rrq_dma >> 40) & 0xff; | 
|  | ioarcb->cmd_pkt.cdb[13] = | 
|  | ((u64) hrrq->host_rrq_dma >> 32) & 0xff; | 
|  | } | 
|  |  | 
|  | if (ioarcb->cmd_pkt.cdb[1] & IPR_ID_HRRQ_SELE_ENABLE) | 
|  | ioarcb->cmd_pkt.cdb[14] = | 
|  | ioa_cfg->identify_hrrq_index; | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, | 
|  | IPR_INTERNAL_TIMEOUT); | 
|  |  | 
|  | if (++ioa_cfg->identify_hrrq_index < ioa_cfg->hrrq_num) | 
|  | ipr_cmd->job_step = ipr_ioafp_identify_hrrq; | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_timer_done - Adapter reset timer function | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function is used in adapter reset processing | 
|  | * for timing events. If the reset_cmd pointer in the IOA | 
|  | * config struct is not this adapter's we are doing nested | 
|  | * resets and fail_all_ops will take care of freeing the | 
|  | * command block. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_reset_timer_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (ioa_cfg->reset_cmd == ipr_cmd) { | 
|  | list_del(&ipr_cmd->queue); | 
|  | ipr_cmd->done(ipr_cmd); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_start_timer - Start a timer for adapter reset job | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * @timeout:	timeout value | 
|  | * | 
|  | * Description: This function is used in adapter reset processing | 
|  | * for timing events. If the reset_cmd pointer in the IOA | 
|  | * config struct is not this adapter's we are doing nested | 
|  | * resets and fail_all_ops will take care of freeing the | 
|  | * command block. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_reset_start_timer(struct ipr_cmnd *ipr_cmd, | 
|  | unsigned long timeout) | 
|  | { | 
|  |  | 
|  | ENTER; | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_pending_q); | 
|  | ipr_cmd->done = ipr_reset_ioa_job; | 
|  |  | 
|  | ipr_cmd->timer.data = (unsigned long) ipr_cmd; | 
|  | ipr_cmd->timer.expires = jiffies + timeout; | 
|  | ipr_cmd->timer.function = (void (*)(unsigned long))ipr_reset_timer_done; | 
|  | add_timer(&ipr_cmd->timer); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_init_ioa_mem - Initialize ioa_cfg control block | 
|  | * @ioa_cfg:	ioa cfg struct | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_init_ioa_mem(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct ipr_hrr_queue *hrrq; | 
|  |  | 
|  | for_each_hrrq(hrrq, ioa_cfg) { | 
|  | spin_lock(&hrrq->_lock); | 
|  | memset(hrrq->host_rrq, 0, sizeof(u32) * hrrq->size); | 
|  |  | 
|  | /* Initialize Host RRQ pointers */ | 
|  | hrrq->hrrq_start = hrrq->host_rrq; | 
|  | hrrq->hrrq_end = &hrrq->host_rrq[hrrq->size - 1]; | 
|  | hrrq->hrrq_curr = hrrq->hrrq_start; | 
|  | hrrq->toggle_bit = 1; | 
|  | spin_unlock(&hrrq->_lock); | 
|  | } | 
|  | wmb(); | 
|  |  | 
|  | ioa_cfg->identify_hrrq_index = 0; | 
|  | if (ioa_cfg->hrrq_num == 1) | 
|  | atomic_set(&ioa_cfg->hrrq_index, 0); | 
|  | else | 
|  | atomic_set(&ioa_cfg->hrrq_index, 1); | 
|  |  | 
|  | /* Zero out config table */ | 
|  | memset(ioa_cfg->u.cfg_table, 0, ioa_cfg->cfg_table_size); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_next_stage - Process IPL stage change based on feedback register. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_next_stage(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | unsigned long stage, stage_time; | 
|  | u32 feedback; | 
|  | volatile u32 int_reg; | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | u64 maskval = 0; | 
|  |  | 
|  | feedback = readl(ioa_cfg->regs.init_feedback_reg); | 
|  | stage = feedback & IPR_IPL_INIT_STAGE_MASK; | 
|  | stage_time = feedback & IPR_IPL_INIT_STAGE_TIME_MASK; | 
|  |  | 
|  | ipr_dbg("IPL stage = 0x%lx, IPL stage time = %ld\n", stage, stage_time); | 
|  |  | 
|  | /* sanity check the stage_time value */ | 
|  | if (stage_time == 0) | 
|  | stage_time = IPR_IPL_INIT_DEFAULT_STAGE_TIME; | 
|  | else if (stage_time < IPR_IPL_INIT_MIN_STAGE_TIME) | 
|  | stage_time = IPR_IPL_INIT_MIN_STAGE_TIME; | 
|  | else if (stage_time > IPR_LONG_OPERATIONAL_TIMEOUT) | 
|  | stage_time = IPR_LONG_OPERATIONAL_TIMEOUT; | 
|  |  | 
|  | if (stage == IPR_IPL_INIT_STAGE_UNKNOWN) { | 
|  | writel(IPR_PCII_IPL_STAGE_CHANGE, ioa_cfg->regs.set_interrupt_mask_reg); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); | 
|  | stage_time = ioa_cfg->transop_timeout; | 
|  | ipr_cmd->job_step = ipr_ioafp_identify_hrrq; | 
|  | } else if (stage == IPR_IPL_INIT_STAGE_TRANSOP) { | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); | 
|  | if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) { | 
|  | ipr_cmd->job_step = ipr_ioafp_identify_hrrq; | 
|  | maskval = IPR_PCII_IPL_STAGE_CHANGE; | 
|  | maskval = (maskval << 32) | IPR_PCII_IOA_TRANS_TO_OPER; | 
|  | writeq(maskval, ioa_cfg->regs.set_interrupt_mask_reg); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  | } | 
|  |  | 
|  | ipr_cmd->timer.data = (unsigned long) ipr_cmd; | 
|  | ipr_cmd->timer.expires = jiffies + stage_time * HZ; | 
|  | ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout; | 
|  | ipr_cmd->done = ipr_reset_ioa_job; | 
|  | add_timer(&ipr_cmd->timer); | 
|  |  | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_pending_q); | 
|  |  | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_enable_ioa - Enable the IOA following a reset. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function reinitializes some control blocks and | 
|  | * enables destructive diagnostics on the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_enable_ioa(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | volatile u32 int_reg; | 
|  | volatile u64 maskval; | 
|  | int i; | 
|  |  | 
|  | ENTER; | 
|  | ipr_cmd->job_step = ipr_ioafp_identify_hrrq; | 
|  | ipr_init_ioa_mem(ioa_cfg); | 
|  |  | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | spin_lock(&ioa_cfg->hrrq[i]._lock); | 
|  | ioa_cfg->hrrq[i].allow_interrupts = 1; | 
|  | spin_unlock(&ioa_cfg->hrrq[i]._lock); | 
|  | } | 
|  | wmb(); | 
|  | if (ioa_cfg->sis64) { | 
|  | /* Set the adapter to the correct endian mode. */ | 
|  | writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg); | 
|  | int_reg = readl(ioa_cfg->regs.endian_swap_reg); | 
|  | } | 
|  |  | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg32); | 
|  |  | 
|  | if (int_reg & IPR_PCII_IOA_TRANS_TO_OPER) { | 
|  | writel((IPR_PCII_ERROR_INTERRUPTS | IPR_PCII_HRRQ_UPDATED), | 
|  | ioa_cfg->regs.clr_interrupt_mask_reg32); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /* Enable destructive diagnostics on IOA */ | 
|  | writel(ioa_cfg->doorbell, ioa_cfg->regs.set_uproc_interrupt_reg32); | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | maskval = IPR_PCII_IPL_STAGE_CHANGE; | 
|  | maskval = (maskval << 32) | IPR_PCII_OPER_INTERRUPTS; | 
|  | writeq(maskval, ioa_cfg->regs.clr_interrupt_mask_reg); | 
|  | } else | 
|  | writel(IPR_PCII_OPER_INTERRUPTS, ioa_cfg->regs.clr_interrupt_mask_reg32); | 
|  |  | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); | 
|  |  | 
|  | dev_info(&ioa_cfg->pdev->dev, "Initializing IOA.\n"); | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | ipr_cmd->job_step = ipr_reset_next_stage; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | ipr_cmd->timer.data = (unsigned long) ipr_cmd; | 
|  | ipr_cmd->timer.expires = jiffies + (ioa_cfg->transop_timeout * HZ); | 
|  | ipr_cmd->timer.function = (void (*)(unsigned long))ipr_oper_timeout; | 
|  | ipr_cmd->done = ipr_reset_ioa_job; | 
|  | add_timer(&ipr_cmd->timer); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_pending_q); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_wait_for_dump - Wait for a dump to timeout. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function is invoked when an adapter dump has run out | 
|  | * of processing time. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE | 
|  | **/ | 
|  | static int ipr_reset_wait_for_dump(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | if (ioa_cfg->sdt_state == GET_DUMP) | 
|  | ioa_cfg->sdt_state = WAIT_FOR_DUMP; | 
|  | else if (ioa_cfg->sdt_state == READ_DUMP) | 
|  | ioa_cfg->sdt_state = ABORT_DUMP; | 
|  |  | 
|  | ioa_cfg->dump_timeout = 1; | 
|  | ipr_cmd->job_step = ipr_reset_alert; | 
|  |  | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_unit_check_no_data - Log a unit check/no data error log | 
|  | * @ioa_cfg:		ioa config struct | 
|  | * | 
|  | * Logs an error indicating the adapter unit checked, but for some | 
|  | * reason, we were unable to fetch the unit check buffer. | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_unit_check_no_data(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | ioa_cfg->errors_logged++; | 
|  | dev_err(&ioa_cfg->pdev->dev, "IOA unit check with no data\n"); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_unit_check_buffer - Get the unit check buffer from the IOA | 
|  | * @ioa_cfg:		ioa config struct | 
|  | * | 
|  | * Fetches the unit check buffer from the adapter by clocking the data | 
|  | * through the mailbox register. | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_get_unit_check_buffer(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | unsigned long mailbox; | 
|  | struct ipr_hostrcb *hostrcb; | 
|  | struct ipr_uc_sdt sdt; | 
|  | int rc, length; | 
|  | u32 ioasc; | 
|  |  | 
|  | mailbox = readl(ioa_cfg->ioa_mailbox); | 
|  |  | 
|  | if (!ioa_cfg->sis64 && !ipr_sdt_is_fmt2(mailbox)) { | 
|  | ipr_unit_check_no_data(ioa_cfg); | 
|  | return; | 
|  | } | 
|  |  | 
|  | memset(&sdt, 0, sizeof(struct ipr_uc_sdt)); | 
|  | rc = ipr_get_ldump_data_section(ioa_cfg, mailbox, (__be32 *) &sdt, | 
|  | (sizeof(struct ipr_uc_sdt)) / sizeof(__be32)); | 
|  |  | 
|  | if (rc || !(sdt.entry[0].flags & IPR_SDT_VALID_ENTRY) || | 
|  | ((be32_to_cpu(sdt.hdr.state) != IPR_FMT3_SDT_READY_TO_USE) && | 
|  | (be32_to_cpu(sdt.hdr.state) != IPR_FMT2_SDT_READY_TO_USE))) { | 
|  | ipr_unit_check_no_data(ioa_cfg); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* Find length of the first sdt entry (UC buffer) */ | 
|  | if (be32_to_cpu(sdt.hdr.state) == IPR_FMT3_SDT_READY_TO_USE) | 
|  | length = be32_to_cpu(sdt.entry[0].end_token); | 
|  | else | 
|  | length = (be32_to_cpu(sdt.entry[0].end_token) - | 
|  | be32_to_cpu(sdt.entry[0].start_token)) & | 
|  | IPR_FMT2_MBX_ADDR_MASK; | 
|  |  | 
|  | hostrcb = list_entry(ioa_cfg->hostrcb_free_q.next, | 
|  | struct ipr_hostrcb, queue); | 
|  | list_del(&hostrcb->queue); | 
|  | memset(&hostrcb->hcam, 0, sizeof(hostrcb->hcam)); | 
|  |  | 
|  | rc = ipr_get_ldump_data_section(ioa_cfg, | 
|  | be32_to_cpu(sdt.entry[0].start_token), | 
|  | (__be32 *)&hostrcb->hcam, | 
|  | min(length, (int)sizeof(hostrcb->hcam)) / sizeof(__be32)); | 
|  |  | 
|  | if (!rc) { | 
|  | ipr_handle_log_data(ioa_cfg, hostrcb); | 
|  | ioasc = be32_to_cpu(hostrcb->hcam.u.error.fd_ioasc); | 
|  | if (ioasc == IPR_IOASC_NR_IOA_RESET_REQUIRED && | 
|  | ioa_cfg->sdt_state == GET_DUMP) | 
|  | ioa_cfg->sdt_state = WAIT_FOR_DUMP; | 
|  | } else | 
|  | ipr_unit_check_no_data(ioa_cfg); | 
|  |  | 
|  | list_add_tail(&hostrcb->queue, &ioa_cfg->hostrcb_free_q); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_get_unit_check_job - Call to get the unit check buffer. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function will call to get the unit check buffer. | 
|  | * | 
|  | * Return value: | 
|  | *	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_get_unit_check_job(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | ENTER; | 
|  | ioa_cfg->ioa_unit_checked = 0; | 
|  | ipr_get_unit_check_buffer(ioa_cfg); | 
|  | ipr_cmd->job_step = ipr_reset_alert; | 
|  | ipr_reset_start_timer(ipr_cmd, 0); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_restore_cfg_space - Restore PCI config space. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function restores the saved PCI config space of | 
|  | * the adapter, fails all outstanding ops back to the callers, and | 
|  | * fetches the dump/unit check if applicable to this reset. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_restore_cfg_space(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | u32 int_reg; | 
|  |  | 
|  | ENTER; | 
|  | ioa_cfg->pdev->state_saved = true; | 
|  | pci_restore_state(ioa_cfg->pdev); | 
|  |  | 
|  | if (ipr_set_pcix_cmd_reg(ioa_cfg)) { | 
|  | ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR); | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | ipr_fail_all_ops(ioa_cfg); | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | /* Set the adapter to the correct endian mode. */ | 
|  | writel(IPR_ENDIAN_SWAP_KEY, ioa_cfg->regs.endian_swap_reg); | 
|  | int_reg = readl(ioa_cfg->regs.endian_swap_reg); | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->ioa_unit_checked) { | 
|  | if (ioa_cfg->sis64) { | 
|  | ipr_cmd->job_step = ipr_reset_get_unit_check_job; | 
|  | ipr_reset_start_timer(ipr_cmd, IPR_DUMP_DELAY_TIMEOUT); | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } else { | 
|  | ioa_cfg->ioa_unit_checked = 0; | 
|  | ipr_get_unit_check_buffer(ioa_cfg); | 
|  | ipr_cmd->job_step = ipr_reset_alert; | 
|  | ipr_reset_start_timer(ipr_cmd, 0); | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->in_ioa_bringdown) { | 
|  | ipr_cmd->job_step = ipr_ioa_bringdown_done; | 
|  | } else { | 
|  | ipr_cmd->job_step = ipr_reset_enable_ioa; | 
|  |  | 
|  | if (GET_DUMP == ioa_cfg->sdt_state) { | 
|  | ioa_cfg->sdt_state = READ_DUMP; | 
|  | ioa_cfg->dump_timeout = 0; | 
|  | if (ioa_cfg->sis64) | 
|  | ipr_reset_start_timer(ipr_cmd, IPR_SIS64_DUMP_TIMEOUT); | 
|  | else | 
|  | ipr_reset_start_timer(ipr_cmd, IPR_SIS32_DUMP_TIMEOUT); | 
|  | ipr_cmd->job_step = ipr_reset_wait_for_dump; | 
|  | schedule_work(&ioa_cfg->work_q); | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  | } | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_bist_done - BIST has completed on the adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: Unblock config space and resume the reset process. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE | 
|  | **/ | 
|  | static int ipr_reset_bist_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | ENTER; | 
|  | if (ioa_cfg->cfg_locked) | 
|  | pci_cfg_access_unlock(ioa_cfg->pdev); | 
|  | ioa_cfg->cfg_locked = 0; | 
|  | ipr_cmd->job_step = ipr_reset_restore_cfg_space; | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_start_bist - Run BIST on the adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function runs BIST on the adapter, then delays 2 seconds. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_start_bist(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | int rc = PCIBIOS_SUCCESSFUL; | 
|  |  | 
|  | ENTER; | 
|  | if (ioa_cfg->ipr_chip->bist_method == IPR_MMIO) | 
|  | writel(IPR_UPROCI_SIS64_START_BIST, | 
|  | ioa_cfg->regs.set_uproc_interrupt_reg32); | 
|  | else | 
|  | rc = pci_write_config_byte(ioa_cfg->pdev, PCI_BIST, PCI_BIST_START); | 
|  |  | 
|  | if (rc == PCIBIOS_SUCCESSFUL) { | 
|  | ipr_cmd->job_step = ipr_reset_bist_done; | 
|  | ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT); | 
|  | rc = IPR_RC_JOB_RETURN; | 
|  | } else { | 
|  | if (ioa_cfg->cfg_locked) | 
|  | pci_cfg_access_unlock(ipr_cmd->ioa_cfg->pdev); | 
|  | ioa_cfg->cfg_locked = 0; | 
|  | ipr_cmd->s.ioasa.hdr.ioasc = cpu_to_be32(IPR_IOASC_PCI_ACCESS_ERROR); | 
|  | rc = IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | LEAVE; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_slot_reset_done - Clear PCI reset to the adapter | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This clears PCI reset to the adapter and delays two seconds. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_slot_reset_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | ENTER; | 
|  | pci_set_pcie_reset_state(ipr_cmd->ioa_cfg->pdev, pcie_deassert_reset); | 
|  | ipr_cmd->job_step = ipr_reset_bist_done; | 
|  | ipr_reset_start_timer(ipr_cmd, IPR_WAIT_FOR_BIST_TIMEOUT); | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_slot_reset - Reset the PCI slot of the adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This asserts PCI reset to the adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_slot_reset(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct pci_dev *pdev = ioa_cfg->pdev; | 
|  |  | 
|  | ENTER; | 
|  | pci_set_pcie_reset_state(pdev, pcie_warm_reset); | 
|  | ipr_cmd->job_step = ipr_reset_slot_reset_done; | 
|  | ipr_reset_start_timer(ipr_cmd, IPR_PCI_RESET_TIMEOUT); | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_block_config_access_wait - Wait for permission to block config access | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This attempts to block config access to the IOA. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_block_config_access_wait(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | int rc = IPR_RC_JOB_CONTINUE; | 
|  |  | 
|  | if (pci_cfg_access_trylock(ioa_cfg->pdev)) { | 
|  | ioa_cfg->cfg_locked = 1; | 
|  | ipr_cmd->job_step = ioa_cfg->reset; | 
|  | } else { | 
|  | if (ipr_cmd->u.time_left) { | 
|  | rc = IPR_RC_JOB_RETURN; | 
|  | ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT; | 
|  | ipr_reset_start_timer(ipr_cmd, | 
|  | IPR_CHECK_FOR_RESET_TIMEOUT); | 
|  | } else { | 
|  | ipr_cmd->job_step = ioa_cfg->reset; | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Timed out waiting to lock config access. Resetting anyway.\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_block_config_access - Block config access to the IOA | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This attempts to block config access to the IOA | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE | 
|  | **/ | 
|  | static int ipr_reset_block_config_access(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | ipr_cmd->ioa_cfg->cfg_locked = 0; | 
|  | ipr_cmd->job_step = ipr_reset_block_config_access_wait; | 
|  | ipr_cmd->u.time_left = IPR_WAIT_FOR_RESET_TIMEOUT; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_allowed - Query whether or not IOA can be reset | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	0 if reset not allowed / non-zero if reset is allowed | 
|  | **/ | 
|  | static int ipr_reset_allowed(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | volatile u32 temp_reg; | 
|  |  | 
|  | temp_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | 
|  | return ((temp_reg & IPR_PCII_CRITICAL_OPERATION) == 0); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_wait_to_start_bist - Wait for permission to reset IOA. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function waits for adapter permission to run BIST, | 
|  | * then runs BIST. If the adapter does not give permission after a | 
|  | * reasonable time, we will reset the adapter anyway. The impact of | 
|  | * resetting the adapter without warning the adapter is the risk of | 
|  | * losing the persistent error log on the adapter. If the adapter is | 
|  | * reset while it is writing to the flash on the adapter, the flash | 
|  | * segment will have bad ECC and be zeroed. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_wait_to_start_bist(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | int rc = IPR_RC_JOB_RETURN; | 
|  |  | 
|  | if (!ipr_reset_allowed(ioa_cfg) && ipr_cmd->u.time_left) { | 
|  | ipr_cmd->u.time_left -= IPR_CHECK_FOR_RESET_TIMEOUT; | 
|  | ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT); | 
|  | } else { | 
|  | ipr_cmd->job_step = ipr_reset_block_config_access; | 
|  | rc = IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_alert - Alert the adapter of a pending reset | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function alerts the adapter that it will be reset. | 
|  | * If memory space is not currently enabled, proceed directly | 
|  | * to running BIST on the adapter. The timer must always be started | 
|  | * so we guarantee we do not run BIST from ipr_isr. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_alert(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | u16 cmd_reg; | 
|  | int rc; | 
|  |  | 
|  | ENTER; | 
|  | rc = pci_read_config_word(ioa_cfg->pdev, PCI_COMMAND, &cmd_reg); | 
|  |  | 
|  | if ((rc == PCIBIOS_SUCCESSFUL) && (cmd_reg & PCI_COMMAND_MEMORY)) { | 
|  | ipr_mask_and_clear_interrupts(ioa_cfg, ~0); | 
|  | writel(IPR_UPROCI_RESET_ALERT, ioa_cfg->regs.set_uproc_interrupt_reg32); | 
|  | ipr_cmd->job_step = ipr_reset_wait_to_start_bist; | 
|  | } else { | 
|  | ipr_cmd->job_step = ipr_reset_block_config_access; | 
|  | } | 
|  |  | 
|  | ipr_cmd->u.time_left = IPR_WAIT_FOR_RESET_TIMEOUT; | 
|  | ipr_reset_start_timer(ipr_cmd, IPR_CHECK_FOR_RESET_TIMEOUT); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_ucode_download_done - Microcode download completion | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function unmaps the microcode download buffer. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE | 
|  | **/ | 
|  | static int ipr_reset_ucode_download_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_sglist *sglist = ioa_cfg->ucode_sglist; | 
|  |  | 
|  | pci_unmap_sg(ioa_cfg->pdev, sglist->scatterlist, | 
|  | sglist->num_sg, DMA_TO_DEVICE); | 
|  |  | 
|  | ipr_cmd->job_step = ipr_reset_alert; | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_ucode_download - Download microcode to the adapter | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function checks to see if it there is microcode | 
|  | * to download to the adapter. If there is, a download is performed. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_ucode_download(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | struct ipr_sglist *sglist = ioa_cfg->ucode_sglist; | 
|  |  | 
|  | ENTER; | 
|  | ipr_cmd->job_step = ipr_reset_alert; | 
|  |  | 
|  | if (!sglist) | 
|  | return IPR_RC_JOB_CONTINUE; | 
|  |  | 
|  | ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | 
|  | ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_SCSICDB; | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[0] = WRITE_BUFFER; | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_WR_BUF_DOWNLOAD_AND_SAVE; | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[6] = (sglist->buffer_len & 0xff0000) >> 16; | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[7] = (sglist->buffer_len & 0x00ff00) >> 8; | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[8] = sglist->buffer_len & 0x0000ff; | 
|  |  | 
|  | if (ioa_cfg->sis64) | 
|  | ipr_build_ucode_ioadl64(ipr_cmd, sglist); | 
|  | else | 
|  | ipr_build_ucode_ioadl(ipr_cmd, sglist); | 
|  | ipr_cmd->job_step = ipr_reset_ucode_download_done; | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, | 
|  | IPR_WRITE_BUFFER_TIMEOUT); | 
|  |  | 
|  | LEAVE; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_shutdown_ioa - Shutdown the adapter | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function issues an adapter shutdown of the | 
|  | * specified type to the specified adapter as part of the | 
|  | * adapter reset job. | 
|  | * | 
|  | * Return value: | 
|  | * 	IPR_RC_JOB_CONTINUE / IPR_RC_JOB_RETURN | 
|  | **/ | 
|  | static int ipr_reset_shutdown_ioa(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | enum ipr_shutdown_type shutdown_type = ipr_cmd->u.shutdown_type; | 
|  | unsigned long timeout; | 
|  | int rc = IPR_RC_JOB_CONTINUE; | 
|  |  | 
|  | ENTER; | 
|  | if (shutdown_type != IPR_SHUTDOWN_NONE && | 
|  | !ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) { | 
|  | ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | 
|  | ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN; | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[1] = shutdown_type; | 
|  |  | 
|  | if (shutdown_type == IPR_SHUTDOWN_NORMAL) | 
|  | timeout = IPR_SHUTDOWN_TIMEOUT; | 
|  | else if (shutdown_type == IPR_SHUTDOWN_PREPARE_FOR_NORMAL) | 
|  | timeout = IPR_INTERNAL_TIMEOUT; | 
|  | else if (ioa_cfg->dual_raid && ipr_dual_ioa_raid) | 
|  | timeout = IPR_DUAL_IOA_ABBR_SHUTDOWN_TO; | 
|  | else | 
|  | timeout = IPR_ABBREV_SHUTDOWN_TIMEOUT; | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_reset_ioa_job, ipr_timeout, timeout); | 
|  |  | 
|  | rc = IPR_RC_JOB_RETURN; | 
|  | ipr_cmd->job_step = ipr_reset_ucode_download; | 
|  | } else | 
|  | ipr_cmd->job_step = ipr_reset_alert; | 
|  |  | 
|  | LEAVE; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_ioa_job - Adapter reset job | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: This function is the job router for the adapter reset job. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_reset_ioa_job(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | u32 rc, ioasc; | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  |  | 
|  | do { | 
|  | ioasc = be32_to_cpu(ipr_cmd->s.ioasa.hdr.ioasc); | 
|  |  | 
|  | if (ioa_cfg->reset_cmd != ipr_cmd) { | 
|  | /* | 
|  | * We are doing nested adapter resets and this is | 
|  | * not the current reset job. | 
|  | */ | 
|  | list_add_tail(&ipr_cmd->queue, | 
|  | &ipr_cmd->hrrq->hrrq_free_q); | 
|  | return; | 
|  | } | 
|  |  | 
|  | if (IPR_IOASC_SENSE_KEY(ioasc)) { | 
|  | rc = ipr_cmd->job_step_failed(ipr_cmd); | 
|  | if (rc == IPR_RC_JOB_RETURN) | 
|  | return; | 
|  | } | 
|  |  | 
|  | ipr_reinit_ipr_cmnd(ipr_cmd); | 
|  | ipr_cmd->job_step_failed = ipr_reset_cmd_failed; | 
|  | rc = ipr_cmd->job_step(ipr_cmd); | 
|  | } while (rc == IPR_RC_JOB_CONTINUE); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * _ipr_initiate_ioa_reset - Initiate an adapter reset | 
|  | * @ioa_cfg:		ioa config struct | 
|  | * @job_step:		first job step of reset job | 
|  | * @shutdown_type:	shutdown type | 
|  | * | 
|  | * Description: This function will initiate the reset of the given adapter | 
|  | * starting at the selected job step. | 
|  | * If the caller needs to wait on the completion of the reset, | 
|  | * the caller must sleep on the reset_wait_q. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void _ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg, | 
|  | int (*job_step) (struct ipr_cmnd *), | 
|  | enum ipr_shutdown_type shutdown_type) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | int i; | 
|  |  | 
|  | ioa_cfg->in_reset_reload = 1; | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | spin_lock(&ioa_cfg->hrrq[i]._lock); | 
|  | ioa_cfg->hrrq[i].allow_cmds = 0; | 
|  | spin_unlock(&ioa_cfg->hrrq[i]._lock); | 
|  | } | 
|  | wmb(); | 
|  | if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) | 
|  | scsi_block_requests(ioa_cfg->host); | 
|  |  | 
|  | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | 
|  | ioa_cfg->reset_cmd = ipr_cmd; | 
|  | ipr_cmd->job_step = job_step; | 
|  | ipr_cmd->u.shutdown_type = shutdown_type; | 
|  |  | 
|  | ipr_reset_ioa_job(ipr_cmd); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_initiate_ioa_reset - Initiate an adapter reset | 
|  | * @ioa_cfg:		ioa config struct | 
|  | * @shutdown_type:	shutdown type | 
|  | * | 
|  | * Description: This function will initiate the reset of the given adapter. | 
|  | * If the caller needs to wait on the completion of the reset, | 
|  | * the caller must sleep on the reset_wait_q. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_initiate_ioa_reset(struct ipr_ioa_cfg *ioa_cfg, | 
|  | enum ipr_shutdown_type shutdown_type) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) | 
|  | return; | 
|  |  | 
|  | if (ioa_cfg->in_reset_reload) { | 
|  | if (ioa_cfg->sdt_state == GET_DUMP) | 
|  | ioa_cfg->sdt_state = WAIT_FOR_DUMP; | 
|  | else if (ioa_cfg->sdt_state == READ_DUMP) | 
|  | ioa_cfg->sdt_state = ABORT_DUMP; | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->reset_retries++ >= IPR_NUM_RESET_RELOAD_RETRIES) { | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "IOA taken offline - error recovery failed\n"); | 
|  |  | 
|  | ioa_cfg->reset_retries = 0; | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | spin_lock(&ioa_cfg->hrrq[i]._lock); | 
|  | ioa_cfg->hrrq[i].ioa_is_dead = 1; | 
|  | spin_unlock(&ioa_cfg->hrrq[i]._lock); | 
|  | } | 
|  | wmb(); | 
|  |  | 
|  | if (ioa_cfg->in_ioa_bringdown) { | 
|  | ioa_cfg->reset_cmd = NULL; | 
|  | ioa_cfg->in_reset_reload = 0; | 
|  | ipr_fail_all_ops(ioa_cfg); | 
|  | wake_up_all(&ioa_cfg->reset_wait_q); | 
|  |  | 
|  | if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].removing_ioa) { | 
|  | spin_unlock_irq(ioa_cfg->host->host_lock); | 
|  | scsi_unblock_requests(ioa_cfg->host); | 
|  | spin_lock_irq(ioa_cfg->host->host_lock); | 
|  | } | 
|  | return; | 
|  | } else { | 
|  | ioa_cfg->in_ioa_bringdown = 1; | 
|  | shutdown_type = IPR_SHUTDOWN_NONE; | 
|  | } | 
|  | } | 
|  |  | 
|  | _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_shutdown_ioa, | 
|  | shutdown_type); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_reset_freeze - Hold off all I/O activity | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * Description: If the PCI slot is frozen, hold off all I/O | 
|  | * activity; then, as soon as the slot is available again, | 
|  | * initiate an adapter reset. | 
|  | */ | 
|  | static int ipr_reset_freeze(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg; | 
|  | int i; | 
|  |  | 
|  | /* Disallow new interrupts, avoid loop */ | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | spin_lock(&ioa_cfg->hrrq[i]._lock); | 
|  | ioa_cfg->hrrq[i].allow_interrupts = 0; | 
|  | spin_unlock(&ioa_cfg->hrrq[i]._lock); | 
|  | } | 
|  | wmb(); | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_pending_q); | 
|  | ipr_cmd->done = ipr_reset_ioa_job; | 
|  | return IPR_RC_JOB_RETURN; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_pci_mmio_enabled - Called when MMIO has been re-enabled | 
|  | * @pdev:	PCI device struct | 
|  | * | 
|  | * Description: This routine is called to tell us that the MMIO | 
|  | * access to the IOA has been restored | 
|  | */ | 
|  | static pci_ers_result_t ipr_pci_mmio_enabled(struct pci_dev *pdev) | 
|  | { | 
|  | unsigned long flags = 0; | 
|  | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, flags); | 
|  | if (!ioa_cfg->probe_done) | 
|  | pci_save_state(pdev); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | return PCI_ERS_RESULT_NEED_RESET; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_pci_frozen - Called when slot has experienced a PCI bus error. | 
|  | * @pdev:	PCI device struct | 
|  | * | 
|  | * Description: This routine is called to tell us that the PCI bus | 
|  | * is down. Can't do anything here, except put the device driver | 
|  | * into a holding pattern, waiting for the PCI bus to come back. | 
|  | */ | 
|  | static void ipr_pci_frozen(struct pci_dev *pdev) | 
|  | { | 
|  | unsigned long flags = 0; | 
|  | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, flags); | 
|  | if (ioa_cfg->probe_done) | 
|  | _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_freeze, IPR_SHUTDOWN_NONE); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_pci_slot_reset - Called when PCI slot has been reset. | 
|  | * @pdev:	PCI device struct | 
|  | * | 
|  | * Description: This routine is called by the pci error recovery | 
|  | * code after the PCI slot has been reset, just before we | 
|  | * should resume normal operations. | 
|  | */ | 
|  | static pci_ers_result_t ipr_pci_slot_reset(struct pci_dev *pdev) | 
|  | { | 
|  | unsigned long flags = 0; | 
|  | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, flags); | 
|  | if (ioa_cfg->probe_done) { | 
|  | if (ioa_cfg->needs_warm_reset) | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  | else | 
|  | _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_restore_cfg_space, | 
|  | IPR_SHUTDOWN_NONE); | 
|  | } else | 
|  | wake_up_all(&ioa_cfg->eeh_wait_q); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | return PCI_ERS_RESULT_RECOVERED; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_pci_perm_failure - Called when PCI slot is dead for good. | 
|  | * @pdev:	PCI device struct | 
|  | * | 
|  | * Description: This routine is called when the PCI bus has | 
|  | * permanently failed. | 
|  | */ | 
|  | static void ipr_pci_perm_failure(struct pci_dev *pdev) | 
|  | { | 
|  | unsigned long flags = 0; | 
|  | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); | 
|  | int i; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, flags); | 
|  | if (ioa_cfg->probe_done) { | 
|  | if (ioa_cfg->sdt_state == WAIT_FOR_DUMP) | 
|  | ioa_cfg->sdt_state = ABORT_DUMP; | 
|  | ioa_cfg->reset_retries = IPR_NUM_RESET_RELOAD_RETRIES - 1; | 
|  | ioa_cfg->in_ioa_bringdown = 1; | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | spin_lock(&ioa_cfg->hrrq[i]._lock); | 
|  | ioa_cfg->hrrq[i].allow_cmds = 0; | 
|  | spin_unlock(&ioa_cfg->hrrq[i]._lock); | 
|  | } | 
|  | wmb(); | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  | } else | 
|  | wake_up_all(&ioa_cfg->eeh_wait_q); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_pci_error_detected - Called when a PCI error is detected. | 
|  | * @pdev:	PCI device struct | 
|  | * @state:	PCI channel state | 
|  | * | 
|  | * Description: Called when a PCI error is detected. | 
|  | * | 
|  | * Return value: | 
|  | * 	PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT | 
|  | */ | 
|  | static pci_ers_result_t ipr_pci_error_detected(struct pci_dev *pdev, | 
|  | pci_channel_state_t state) | 
|  | { | 
|  | switch (state) { | 
|  | case pci_channel_io_frozen: | 
|  | ipr_pci_frozen(pdev); | 
|  | return PCI_ERS_RESULT_CAN_RECOVER; | 
|  | case pci_channel_io_perm_failure: | 
|  | ipr_pci_perm_failure(pdev); | 
|  | return PCI_ERS_RESULT_DISCONNECT; | 
|  | break; | 
|  | default: | 
|  | break; | 
|  | } | 
|  | return PCI_ERS_RESULT_NEED_RESET; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_probe_ioa_part2 - Initializes IOAs found in ipr_probe_ioa(..) | 
|  | * @ioa_cfg:	ioa cfg struct | 
|  | * | 
|  | * Description: This is the second phase of adapter intialization | 
|  | * This function takes care of initilizing the adapter to the point | 
|  | * where it can accept new commands. | 
|  |  | 
|  | * Return value: | 
|  | * 	0 on success / -EIO on failure | 
|  | **/ | 
|  | static int ipr_probe_ioa_part2(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int rc = 0; | 
|  | unsigned long host_lock_flags = 0; | 
|  |  | 
|  | ENTER; | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); | 
|  | dev_dbg(&ioa_cfg->pdev->dev, "ioa_cfg adx: 0x%p\n", ioa_cfg); | 
|  | ioa_cfg->probe_done = 1; | 
|  | if (ioa_cfg->needs_hard_reset) { | 
|  | ioa_cfg->needs_hard_reset = 0; | 
|  | ipr_initiate_ioa_reset(ioa_cfg, IPR_SHUTDOWN_NONE); | 
|  | } else | 
|  | _ipr_initiate_ioa_reset(ioa_cfg, ipr_reset_enable_ioa, | 
|  | IPR_SHUTDOWN_NONE); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); | 
|  |  | 
|  | if (ioa_cfg->hrrq[IPR_INIT_HRRQ].ioa_is_dead) { | 
|  | rc = -EIO; | 
|  | } else if (ipr_invalid_adapter(ioa_cfg)) { | 
|  | if (!ipr_testmode) | 
|  | rc = -EIO; | 
|  |  | 
|  | dev_err(&ioa_cfg->pdev->dev, | 
|  | "Adapter not supported in this hardware configuration.\n"); | 
|  | } | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); | 
|  |  | 
|  | LEAVE; | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_free_cmd_blks - Frees command blocks allocated for an adapter | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_free_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < IPR_NUM_CMD_BLKS; i++) { | 
|  | if (ioa_cfg->ipr_cmnd_list[i]) | 
|  | pci_pool_free(ioa_cfg->ipr_cmd_pool, | 
|  | ioa_cfg->ipr_cmnd_list[i], | 
|  | ioa_cfg->ipr_cmnd_list_dma[i]); | 
|  |  | 
|  | ioa_cfg->ipr_cmnd_list[i] = NULL; | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->ipr_cmd_pool) | 
|  | pci_pool_destroy(ioa_cfg->ipr_cmd_pool); | 
|  |  | 
|  | kfree(ioa_cfg->ipr_cmnd_list); | 
|  | kfree(ioa_cfg->ipr_cmnd_list_dma); | 
|  | ioa_cfg->ipr_cmnd_list = NULL; | 
|  | ioa_cfg->ipr_cmnd_list_dma = NULL; | 
|  | ioa_cfg->ipr_cmd_pool = NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_free_mem - Frees memory allocated for an adapter | 
|  | * @ioa_cfg:	ioa cfg struct | 
|  | * | 
|  | * Return value: | 
|  | * 	nothing | 
|  | **/ | 
|  | static void ipr_free_mem(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | kfree(ioa_cfg->res_entries); | 
|  | pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_misc_cbs), | 
|  | ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma); | 
|  | ipr_free_cmd_blks(ioa_cfg); | 
|  |  | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) | 
|  | pci_free_consistent(ioa_cfg->pdev, | 
|  | sizeof(u32) * ioa_cfg->hrrq[i].size, | 
|  | ioa_cfg->hrrq[i].host_rrq, | 
|  | ioa_cfg->hrrq[i].host_rrq_dma); | 
|  |  | 
|  | pci_free_consistent(ioa_cfg->pdev, ioa_cfg->cfg_table_size, | 
|  | ioa_cfg->u.cfg_table, | 
|  | ioa_cfg->cfg_table_dma); | 
|  |  | 
|  | for (i = 0; i < IPR_NUM_HCAMS; i++) { | 
|  | pci_free_consistent(ioa_cfg->pdev, | 
|  | sizeof(struct ipr_hostrcb), | 
|  | ioa_cfg->hostrcb[i], | 
|  | ioa_cfg->hostrcb_dma[i]); | 
|  | } | 
|  |  | 
|  | ipr_free_dump(ioa_cfg); | 
|  | kfree(ioa_cfg->trace); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_free_all_resources - Free all allocated resources for an adapter. | 
|  | * @ipr_cmd:	ipr command struct | 
|  | * | 
|  | * This function frees all allocated resources for the | 
|  | * specified adapter. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_free_all_resources(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct pci_dev *pdev = ioa_cfg->pdev; | 
|  |  | 
|  | ENTER; | 
|  | if (ioa_cfg->intr_flag == IPR_USE_MSI || | 
|  | ioa_cfg->intr_flag == IPR_USE_MSIX) { | 
|  | int i; | 
|  | for (i = 0; i < ioa_cfg->nvectors; i++) | 
|  | free_irq(ioa_cfg->vectors_info[i].vec, | 
|  | &ioa_cfg->hrrq[i]); | 
|  | } else | 
|  | free_irq(pdev->irq, &ioa_cfg->hrrq[0]); | 
|  |  | 
|  | if (ioa_cfg->intr_flag == IPR_USE_MSI) { | 
|  | pci_disable_msi(pdev); | 
|  | ioa_cfg->intr_flag &= ~IPR_USE_MSI; | 
|  | } else if (ioa_cfg->intr_flag == IPR_USE_MSIX) { | 
|  | pci_disable_msix(pdev); | 
|  | ioa_cfg->intr_flag &= ~IPR_USE_MSIX; | 
|  | } | 
|  |  | 
|  | iounmap(ioa_cfg->hdw_dma_regs); | 
|  | pci_release_regions(pdev); | 
|  | ipr_free_mem(ioa_cfg); | 
|  | scsi_host_put(ioa_cfg->host); | 
|  | pci_disable_device(pdev); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_alloc_cmd_blks - Allocate command blocks for an adapter | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / -ENOMEM on allocation failure | 
|  | **/ | 
|  | static int ipr_alloc_cmd_blks(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_ioarcb *ioarcb; | 
|  | dma_addr_t dma_addr; | 
|  | int i, entries_each_hrrq, hrrq_id = 0; | 
|  |  | 
|  | ioa_cfg->ipr_cmd_pool = pci_pool_create(IPR_NAME, ioa_cfg->pdev, | 
|  | sizeof(struct ipr_cmnd), 512, 0); | 
|  |  | 
|  | if (!ioa_cfg->ipr_cmd_pool) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ioa_cfg->ipr_cmnd_list = kcalloc(IPR_NUM_CMD_BLKS, sizeof(struct ipr_cmnd *), GFP_KERNEL); | 
|  | ioa_cfg->ipr_cmnd_list_dma = kcalloc(IPR_NUM_CMD_BLKS, sizeof(dma_addr_t), GFP_KERNEL); | 
|  |  | 
|  | if (!ioa_cfg->ipr_cmnd_list || !ioa_cfg->ipr_cmnd_list_dma) { | 
|  | ipr_free_cmd_blks(ioa_cfg); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | if (ioa_cfg->hrrq_num > 1) { | 
|  | if (i == 0) { | 
|  | entries_each_hrrq = IPR_NUM_INTERNAL_CMD_BLKS; | 
|  | ioa_cfg->hrrq[i].min_cmd_id = 0; | 
|  | ioa_cfg->hrrq[i].max_cmd_id = | 
|  | (entries_each_hrrq - 1); | 
|  | } else { | 
|  | entries_each_hrrq = | 
|  | IPR_NUM_BASE_CMD_BLKS/ | 
|  | (ioa_cfg->hrrq_num - 1); | 
|  | ioa_cfg->hrrq[i].min_cmd_id = | 
|  | IPR_NUM_INTERNAL_CMD_BLKS + | 
|  | (i - 1) * entries_each_hrrq; | 
|  | ioa_cfg->hrrq[i].max_cmd_id = | 
|  | (IPR_NUM_INTERNAL_CMD_BLKS + | 
|  | i * entries_each_hrrq - 1); | 
|  | } | 
|  | } else { | 
|  | entries_each_hrrq = IPR_NUM_CMD_BLKS; | 
|  | ioa_cfg->hrrq[i].min_cmd_id = 0; | 
|  | ioa_cfg->hrrq[i].max_cmd_id = (entries_each_hrrq - 1); | 
|  | } | 
|  | ioa_cfg->hrrq[i].size = entries_each_hrrq; | 
|  | } | 
|  |  | 
|  | BUG_ON(ioa_cfg->hrrq_num == 0); | 
|  |  | 
|  | i = IPR_NUM_CMD_BLKS - | 
|  | ioa_cfg->hrrq[ioa_cfg->hrrq_num - 1].max_cmd_id - 1; | 
|  | if (i > 0) { | 
|  | ioa_cfg->hrrq[ioa_cfg->hrrq_num - 1].size += i; | 
|  | ioa_cfg->hrrq[ioa_cfg->hrrq_num - 1].max_cmd_id += i; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < IPR_NUM_CMD_BLKS; i++) { | 
|  | ipr_cmd = pci_pool_alloc(ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr); | 
|  |  | 
|  | if (!ipr_cmd) { | 
|  | ipr_free_cmd_blks(ioa_cfg); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | memset(ipr_cmd, 0, sizeof(*ipr_cmd)); | 
|  | ioa_cfg->ipr_cmnd_list[i] = ipr_cmd; | 
|  | ioa_cfg->ipr_cmnd_list_dma[i] = dma_addr; | 
|  |  | 
|  | ioarcb = &ipr_cmd->ioarcb; | 
|  | ipr_cmd->dma_addr = dma_addr; | 
|  | if (ioa_cfg->sis64) | 
|  | ioarcb->a.ioarcb_host_pci_addr64 = cpu_to_be64(dma_addr); | 
|  | else | 
|  | ioarcb->a.ioarcb_host_pci_addr = cpu_to_be32(dma_addr); | 
|  |  | 
|  | ioarcb->host_response_handle = cpu_to_be32(i << 2); | 
|  | if (ioa_cfg->sis64) { | 
|  | ioarcb->u.sis64_addr_data.data_ioadl_addr = | 
|  | cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, i.ioadl64)); | 
|  | ioarcb->u.sis64_addr_data.ioasa_host_pci_addr = | 
|  | cpu_to_be64(dma_addr + offsetof(struct ipr_cmnd, s.ioasa64)); | 
|  | } else { | 
|  | ioarcb->write_ioadl_addr = | 
|  | cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, i.ioadl)); | 
|  | ioarcb->read_ioadl_addr = ioarcb->write_ioadl_addr; | 
|  | ioarcb->ioasa_host_pci_addr = | 
|  | cpu_to_be32(dma_addr + offsetof(struct ipr_cmnd, s.ioasa)); | 
|  | } | 
|  | ioarcb->ioasa_len = cpu_to_be16(sizeof(struct ipr_ioasa)); | 
|  | ipr_cmd->cmd_index = i; | 
|  | ipr_cmd->ioa_cfg = ioa_cfg; | 
|  | ipr_cmd->sense_buffer_dma = dma_addr + | 
|  | offsetof(struct ipr_cmnd, sense_buffer); | 
|  |  | 
|  | ipr_cmd->ioarcb.cmd_pkt.hrrq_id = hrrq_id; | 
|  | ipr_cmd->hrrq = &ioa_cfg->hrrq[hrrq_id]; | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | if (i >= ioa_cfg->hrrq[hrrq_id].max_cmd_id) | 
|  | hrrq_id++; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_alloc_mem - Allocate memory for an adapter | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / non-zero for error | 
|  | **/ | 
|  | static int ipr_alloc_mem(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct pci_dev *pdev = ioa_cfg->pdev; | 
|  | int i, rc = -ENOMEM; | 
|  |  | 
|  | ENTER; | 
|  | ioa_cfg->res_entries = kzalloc(sizeof(struct ipr_resource_entry) * | 
|  | ioa_cfg->max_devs_supported, GFP_KERNEL); | 
|  |  | 
|  | if (!ioa_cfg->res_entries) | 
|  | goto out; | 
|  |  | 
|  | for (i = 0; i < ioa_cfg->max_devs_supported; i++) { | 
|  | list_add_tail(&ioa_cfg->res_entries[i].queue, &ioa_cfg->free_res_q); | 
|  | ioa_cfg->res_entries[i].ioa_cfg = ioa_cfg; | 
|  | } | 
|  |  | 
|  | ioa_cfg->vpd_cbs = pci_alloc_consistent(ioa_cfg->pdev, | 
|  | sizeof(struct ipr_misc_cbs), | 
|  | &ioa_cfg->vpd_cbs_dma); | 
|  |  | 
|  | if (!ioa_cfg->vpd_cbs) | 
|  | goto out_free_res_entries; | 
|  |  | 
|  | if (ipr_alloc_cmd_blks(ioa_cfg)) | 
|  | goto out_free_vpd_cbs; | 
|  |  | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | ioa_cfg->hrrq[i].host_rrq = pci_alloc_consistent(ioa_cfg->pdev, | 
|  | sizeof(u32) * ioa_cfg->hrrq[i].size, | 
|  | &ioa_cfg->hrrq[i].host_rrq_dma); | 
|  |  | 
|  | if (!ioa_cfg->hrrq[i].host_rrq)  { | 
|  | while (--i > 0) | 
|  | pci_free_consistent(pdev, | 
|  | sizeof(u32) * ioa_cfg->hrrq[i].size, | 
|  | ioa_cfg->hrrq[i].host_rrq, | 
|  | ioa_cfg->hrrq[i].host_rrq_dma); | 
|  | goto out_ipr_free_cmd_blocks; | 
|  | } | 
|  | ioa_cfg->hrrq[i].ioa_cfg = ioa_cfg; | 
|  | } | 
|  |  | 
|  | ioa_cfg->u.cfg_table = pci_alloc_consistent(ioa_cfg->pdev, | 
|  | ioa_cfg->cfg_table_size, | 
|  | &ioa_cfg->cfg_table_dma); | 
|  |  | 
|  | if (!ioa_cfg->u.cfg_table) | 
|  | goto out_free_host_rrq; | 
|  |  | 
|  | for (i = 0; i < IPR_NUM_HCAMS; i++) { | 
|  | ioa_cfg->hostrcb[i] = pci_alloc_consistent(ioa_cfg->pdev, | 
|  | sizeof(struct ipr_hostrcb), | 
|  | &ioa_cfg->hostrcb_dma[i]); | 
|  |  | 
|  | if (!ioa_cfg->hostrcb[i]) | 
|  | goto out_free_hostrcb_dma; | 
|  |  | 
|  | ioa_cfg->hostrcb[i]->hostrcb_dma = | 
|  | ioa_cfg->hostrcb_dma[i] + offsetof(struct ipr_hostrcb, hcam); | 
|  | ioa_cfg->hostrcb[i]->ioa_cfg = ioa_cfg; | 
|  | list_add_tail(&ioa_cfg->hostrcb[i]->queue, &ioa_cfg->hostrcb_free_q); | 
|  | } | 
|  |  | 
|  | ioa_cfg->trace = kzalloc(sizeof(struct ipr_trace_entry) * | 
|  | IPR_NUM_TRACE_ENTRIES, GFP_KERNEL); | 
|  |  | 
|  | if (!ioa_cfg->trace) | 
|  | goto out_free_hostrcb_dma; | 
|  |  | 
|  | rc = 0; | 
|  | out: | 
|  | LEAVE; | 
|  | return rc; | 
|  |  | 
|  | out_free_hostrcb_dma: | 
|  | while (i-- > 0) { | 
|  | pci_free_consistent(pdev, sizeof(struct ipr_hostrcb), | 
|  | ioa_cfg->hostrcb[i], | 
|  | ioa_cfg->hostrcb_dma[i]); | 
|  | } | 
|  | pci_free_consistent(pdev, ioa_cfg->cfg_table_size, | 
|  | ioa_cfg->u.cfg_table, | 
|  | ioa_cfg->cfg_table_dma); | 
|  | out_free_host_rrq: | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | pci_free_consistent(pdev, | 
|  | sizeof(u32) * ioa_cfg->hrrq[i].size, | 
|  | ioa_cfg->hrrq[i].host_rrq, | 
|  | ioa_cfg->hrrq[i].host_rrq_dma); | 
|  | } | 
|  | out_ipr_free_cmd_blocks: | 
|  | ipr_free_cmd_blks(ioa_cfg); | 
|  | out_free_vpd_cbs: | 
|  | pci_free_consistent(pdev, sizeof(struct ipr_misc_cbs), | 
|  | ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma); | 
|  | out_free_res_entries: | 
|  | kfree(ioa_cfg->res_entries); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_initialize_bus_attr - Initialize SCSI bus attributes to default values | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_initialize_bus_attr(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < IPR_MAX_NUM_BUSES; i++) { | 
|  | ioa_cfg->bus_attr[i].bus = i; | 
|  | ioa_cfg->bus_attr[i].qas_enabled = 0; | 
|  | ioa_cfg->bus_attr[i].bus_width = IPR_DEFAULT_BUS_WIDTH; | 
|  | if (ipr_max_speed < ARRAY_SIZE(ipr_max_bus_speeds)) | 
|  | ioa_cfg->bus_attr[i].max_xfer_rate = ipr_max_bus_speeds[ipr_max_speed]; | 
|  | else | 
|  | ioa_cfg->bus_attr[i].max_xfer_rate = IPR_U160_SCSI_RATE; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_init_regs - Initialize IOA registers | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | *	none | 
|  | **/ | 
|  | static void ipr_init_regs(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | const struct ipr_interrupt_offsets *p; | 
|  | struct ipr_interrupts *t; | 
|  | void __iomem *base; | 
|  |  | 
|  | p = &ioa_cfg->chip_cfg->regs; | 
|  | t = &ioa_cfg->regs; | 
|  | base = ioa_cfg->hdw_dma_regs; | 
|  |  | 
|  | t->set_interrupt_mask_reg = base + p->set_interrupt_mask_reg; | 
|  | t->clr_interrupt_mask_reg = base + p->clr_interrupt_mask_reg; | 
|  | t->clr_interrupt_mask_reg32 = base + p->clr_interrupt_mask_reg32; | 
|  | t->sense_interrupt_mask_reg = base + p->sense_interrupt_mask_reg; | 
|  | t->sense_interrupt_mask_reg32 = base + p->sense_interrupt_mask_reg32; | 
|  | t->clr_interrupt_reg = base + p->clr_interrupt_reg; | 
|  | t->clr_interrupt_reg32 = base + p->clr_interrupt_reg32; | 
|  | t->sense_interrupt_reg = base + p->sense_interrupt_reg; | 
|  | t->sense_interrupt_reg32 = base + p->sense_interrupt_reg32; | 
|  | t->ioarrin_reg = base + p->ioarrin_reg; | 
|  | t->sense_uproc_interrupt_reg = base + p->sense_uproc_interrupt_reg; | 
|  | t->sense_uproc_interrupt_reg32 = base + p->sense_uproc_interrupt_reg32; | 
|  | t->set_uproc_interrupt_reg = base + p->set_uproc_interrupt_reg; | 
|  | t->set_uproc_interrupt_reg32 = base + p->set_uproc_interrupt_reg32; | 
|  | t->clr_uproc_interrupt_reg = base + p->clr_uproc_interrupt_reg; | 
|  | t->clr_uproc_interrupt_reg32 = base + p->clr_uproc_interrupt_reg32; | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | t->init_feedback_reg = base + p->init_feedback_reg; | 
|  | t->dump_addr_reg = base + p->dump_addr_reg; | 
|  | t->dump_data_reg = base + p->dump_data_reg; | 
|  | t->endian_swap_reg = base + p->endian_swap_reg; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_init_ioa_cfg - Initialize IOA config struct | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * @host:		scsi host struct | 
|  | * @pdev:		PCI dev struct | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_init_ioa_cfg(struct ipr_ioa_cfg *ioa_cfg, | 
|  | struct Scsi_Host *host, struct pci_dev *pdev) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | ioa_cfg->host = host; | 
|  | ioa_cfg->pdev = pdev; | 
|  | ioa_cfg->log_level = ipr_log_level; | 
|  | ioa_cfg->doorbell = IPR_DOORBELL; | 
|  | sprintf(ioa_cfg->eye_catcher, IPR_EYECATCHER); | 
|  | sprintf(ioa_cfg->trace_start, IPR_TRACE_START_LABEL); | 
|  | sprintf(ioa_cfg->cfg_table_start, IPR_CFG_TBL_START); | 
|  | sprintf(ioa_cfg->resource_table_label, IPR_RES_TABLE_LABEL); | 
|  | sprintf(ioa_cfg->ipr_hcam_label, IPR_HCAM_LABEL); | 
|  | sprintf(ioa_cfg->ipr_cmd_label, IPR_CMD_LABEL); | 
|  |  | 
|  | INIT_LIST_HEAD(&ioa_cfg->hostrcb_free_q); | 
|  | INIT_LIST_HEAD(&ioa_cfg->hostrcb_pending_q); | 
|  | INIT_LIST_HEAD(&ioa_cfg->free_res_q); | 
|  | INIT_LIST_HEAD(&ioa_cfg->used_res_q); | 
|  | INIT_WORK(&ioa_cfg->work_q, ipr_worker_thread); | 
|  | init_waitqueue_head(&ioa_cfg->reset_wait_q); | 
|  | init_waitqueue_head(&ioa_cfg->msi_wait_q); | 
|  | init_waitqueue_head(&ioa_cfg->eeh_wait_q); | 
|  | ioa_cfg->sdt_state = INACTIVE; | 
|  |  | 
|  | ipr_initialize_bus_attr(ioa_cfg); | 
|  | ioa_cfg->max_devs_supported = ipr_max_devs; | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | host->max_id = IPR_MAX_SIS64_TARGETS_PER_BUS; | 
|  | host->max_lun = IPR_MAX_SIS64_LUNS_PER_TARGET; | 
|  | if (ipr_max_devs > IPR_MAX_SIS64_DEVS) | 
|  | ioa_cfg->max_devs_supported = IPR_MAX_SIS64_DEVS; | 
|  | ioa_cfg->cfg_table_size = (sizeof(struct ipr_config_table_hdr64) | 
|  | + ((sizeof(struct ipr_config_table_entry64) | 
|  | * ioa_cfg->max_devs_supported))); | 
|  | } else { | 
|  | host->max_id = IPR_MAX_NUM_TARGETS_PER_BUS; | 
|  | host->max_lun = IPR_MAX_NUM_LUNS_PER_TARGET; | 
|  | if (ipr_max_devs > IPR_MAX_PHYSICAL_DEVS) | 
|  | ioa_cfg->max_devs_supported = IPR_MAX_PHYSICAL_DEVS; | 
|  | ioa_cfg->cfg_table_size = (sizeof(struct ipr_config_table_hdr) | 
|  | + ((sizeof(struct ipr_config_table_entry) | 
|  | * ioa_cfg->max_devs_supported))); | 
|  | } | 
|  |  | 
|  | host->max_channel = IPR_MAX_BUS_TO_SCAN; | 
|  | host->unique_id = host->host_no; | 
|  | host->max_cmd_len = IPR_MAX_CDB_LEN; | 
|  | host->can_queue = ioa_cfg->max_cmds; | 
|  | pci_set_drvdata(pdev, ioa_cfg); | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ioa_cfg->hrrq); i++) { | 
|  | INIT_LIST_HEAD(&ioa_cfg->hrrq[i].hrrq_free_q); | 
|  | INIT_LIST_HEAD(&ioa_cfg->hrrq[i].hrrq_pending_q); | 
|  | spin_lock_init(&ioa_cfg->hrrq[i]._lock); | 
|  | if (i == 0) | 
|  | ioa_cfg->hrrq[i].lock = ioa_cfg->host->host_lock; | 
|  | else | 
|  | ioa_cfg->hrrq[i].lock = &ioa_cfg->hrrq[i]._lock; | 
|  | } | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_get_chip_info - Find adapter chip information | 
|  | * @dev_id:		PCI device id struct | 
|  | * | 
|  | * Return value: | 
|  | * 	ptr to chip information on success / NULL on failure | 
|  | **/ | 
|  | static const struct ipr_chip_t * | 
|  | ipr_get_chip_info(const struct pci_device_id *dev_id) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(ipr_chip); i++) | 
|  | if (ipr_chip[i].vendor == dev_id->vendor && | 
|  | ipr_chip[i].device == dev_id->device) | 
|  | return &ipr_chip[i]; | 
|  | return NULL; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_wait_for_pci_err_recovery - Wait for any PCI error recovery to complete | 
|  | *						during probe time | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Return value: | 
|  | * 	None | 
|  | **/ | 
|  | static void ipr_wait_for_pci_err_recovery(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct pci_dev *pdev = ioa_cfg->pdev; | 
|  |  | 
|  | if (pci_channel_offline(pdev)) { | 
|  | wait_event_timeout(ioa_cfg->eeh_wait_q, | 
|  | !pci_channel_offline(pdev), | 
|  | IPR_PCI_ERROR_RECOVERY_TIMEOUT); | 
|  | pci_restore_state(pdev); | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ipr_enable_msix(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | struct msix_entry entries[IPR_MAX_MSIX_VECTORS]; | 
|  | int i, vectors; | 
|  |  | 
|  | for (i = 0; i < ARRAY_SIZE(entries); ++i) | 
|  | entries[i].entry = i; | 
|  |  | 
|  | vectors = pci_enable_msix_range(ioa_cfg->pdev, | 
|  | entries, 1, ipr_number_of_msix); | 
|  | if (vectors < 0) { | 
|  | ipr_wait_for_pci_err_recovery(ioa_cfg); | 
|  | return vectors; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < vectors; i++) | 
|  | ioa_cfg->vectors_info[i].vec = entries[i].vector; | 
|  | ioa_cfg->nvectors = vectors; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int ipr_enable_msi(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int i, vectors; | 
|  |  | 
|  | vectors = pci_enable_msi_range(ioa_cfg->pdev, 1, ipr_number_of_msix); | 
|  | if (vectors < 0) { | 
|  | ipr_wait_for_pci_err_recovery(ioa_cfg); | 
|  | return vectors; | 
|  | } | 
|  |  | 
|  | for (i = 0; i < vectors; i++) | 
|  | ioa_cfg->vectors_info[i].vec = ioa_cfg->pdev->irq + i; | 
|  | ioa_cfg->nvectors = vectors; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void name_msi_vectors(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int vec_idx, n = sizeof(ioa_cfg->vectors_info[0].desc) - 1; | 
|  |  | 
|  | for (vec_idx = 0; vec_idx < ioa_cfg->nvectors; vec_idx++) { | 
|  | snprintf(ioa_cfg->vectors_info[vec_idx].desc, n, | 
|  | "host%d-%d", ioa_cfg->host->host_no, vec_idx); | 
|  | ioa_cfg->vectors_info[vec_idx]. | 
|  | desc[strlen(ioa_cfg->vectors_info[vec_idx].desc)] = 0; | 
|  | } | 
|  | } | 
|  |  | 
|  | static int ipr_request_other_msi_irqs(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int i, rc; | 
|  |  | 
|  | for (i = 1; i < ioa_cfg->nvectors; i++) { | 
|  | rc = request_irq(ioa_cfg->vectors_info[i].vec, | 
|  | ipr_isr_mhrrq, | 
|  | 0, | 
|  | ioa_cfg->vectors_info[i].desc, | 
|  | &ioa_cfg->hrrq[i]); | 
|  | if (rc) { | 
|  | while (--i >= 0) | 
|  | free_irq(ioa_cfg->vectors_info[i].vec, | 
|  | &ioa_cfg->hrrq[i]); | 
|  | return rc; | 
|  | } | 
|  | } | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_test_intr - Handle the interrupt generated in ipr_test_msi(). | 
|  | * @pdev:		PCI device struct | 
|  | * | 
|  | * Description: Simply set the msi_received flag to 1 indicating that | 
|  | * Message Signaled Interrupts are supported. | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / non-zero on failure | 
|  | **/ | 
|  | static irqreturn_t ipr_test_intr(int irq, void *devp) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)devp; | 
|  | unsigned long lock_flags = 0; | 
|  | irqreturn_t rc = IRQ_HANDLED; | 
|  |  | 
|  | dev_info(&ioa_cfg->pdev->dev, "Received IRQ : %d\n", irq); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | ioa_cfg->msi_received = 1; | 
|  | wake_up(&ioa_cfg->msi_wait_q); | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_test_msi - Test for Message Signaled Interrupt (MSI) support. | 
|  | * @pdev:		PCI device struct | 
|  | * | 
|  | * Description: The return value from pci_enable_msi_range() can not always be | 
|  | * trusted.  This routine sets up and initiates a test interrupt to determine | 
|  | * if the interrupt is received via the ipr_test_intr() service routine. | 
|  | * If the tests fails, the driver will fall back to LSI. | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / non-zero on failure | 
|  | **/ | 
|  | static int ipr_test_msi(struct ipr_ioa_cfg *ioa_cfg, struct pci_dev *pdev) | 
|  | { | 
|  | int rc; | 
|  | volatile u32 int_reg; | 
|  | unsigned long lock_flags = 0; | 
|  |  | 
|  | ENTER; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | init_waitqueue_head(&ioa_cfg->msi_wait_q); | 
|  | ioa_cfg->msi_received = 0; | 
|  | ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER); | 
|  | writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.clr_interrupt_mask_reg32); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_mask_reg); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (ioa_cfg->intr_flag == IPR_USE_MSIX) | 
|  | rc = request_irq(ioa_cfg->vectors_info[0].vec, ipr_test_intr, 0, IPR_NAME, ioa_cfg); | 
|  | else | 
|  | rc = request_irq(pdev->irq, ipr_test_intr, 0, IPR_NAME, ioa_cfg); | 
|  | if (rc) { | 
|  | dev_err(&pdev->dev, "Can not assign irq %d\n", pdev->irq); | 
|  | return rc; | 
|  | } else if (ipr_debug) | 
|  | dev_info(&pdev->dev, "IRQ assigned: %d\n", pdev->irq); | 
|  |  | 
|  | writel(IPR_PCII_IO_DEBUG_ACKNOWLEDGE, ioa_cfg->regs.sense_interrupt_reg32); | 
|  | int_reg = readl(ioa_cfg->regs.sense_interrupt_reg); | 
|  | wait_event_timeout(ioa_cfg->msi_wait_q, ioa_cfg->msi_received, HZ); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER); | 
|  |  | 
|  | if (!ioa_cfg->msi_received) { | 
|  | /* MSI test failed */ | 
|  | dev_info(&pdev->dev, "MSI test failed.  Falling back to LSI.\n"); | 
|  | rc = -EOPNOTSUPP; | 
|  | } else if (ipr_debug) | 
|  | dev_info(&pdev->dev, "MSI test succeeded.\n"); | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (ioa_cfg->intr_flag == IPR_USE_MSIX) | 
|  | free_irq(ioa_cfg->vectors_info[0].vec, ioa_cfg); | 
|  | else | 
|  | free_irq(pdev->irq, ioa_cfg); | 
|  |  | 
|  | LEAVE; | 
|  |  | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | /* ipr_probe_ioa - Allocates memory and does first stage of initialization | 
|  | * @pdev:		PCI device struct | 
|  | * @dev_id:		PCI device id struct | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / non-zero on failure | 
|  | **/ | 
|  | static int ipr_probe_ioa(struct pci_dev *pdev, | 
|  | const struct pci_device_id *dev_id) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | struct Scsi_Host *host; | 
|  | unsigned long ipr_regs_pci; | 
|  | void __iomem *ipr_regs; | 
|  | int rc = PCIBIOS_SUCCESSFUL; | 
|  | volatile u32 mask, uproc, interrupts; | 
|  | unsigned long lock_flags, driver_lock_flags; | 
|  |  | 
|  | ENTER; | 
|  |  | 
|  | dev_info(&pdev->dev, "Found IOA with IRQ: %d\n", pdev->irq); | 
|  | host = scsi_host_alloc(&driver_template, sizeof(*ioa_cfg)); | 
|  |  | 
|  | if (!host) { | 
|  | dev_err(&pdev->dev, "call to scsi_host_alloc failed!\n"); | 
|  | rc = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ioa_cfg = (struct ipr_ioa_cfg *)host->hostdata; | 
|  | memset(ioa_cfg, 0, sizeof(struct ipr_ioa_cfg)); | 
|  | ata_host_init(&ioa_cfg->ata_host, &pdev->dev, &ipr_sata_ops); | 
|  |  | 
|  | ioa_cfg->ipr_chip = ipr_get_chip_info(dev_id); | 
|  |  | 
|  | if (!ioa_cfg->ipr_chip) { | 
|  | dev_err(&pdev->dev, "Unknown adapter chipset 0x%04X 0x%04X\n", | 
|  | dev_id->vendor, dev_id->device); | 
|  | goto out_scsi_host_put; | 
|  | } | 
|  |  | 
|  | /* set SIS 32 or SIS 64 */ | 
|  | ioa_cfg->sis64 = ioa_cfg->ipr_chip->sis_type == IPR_SIS64 ? 1 : 0; | 
|  | ioa_cfg->chip_cfg = ioa_cfg->ipr_chip->cfg; | 
|  | ioa_cfg->clear_isr = ioa_cfg->chip_cfg->clear_isr; | 
|  | ioa_cfg->max_cmds = ioa_cfg->chip_cfg->max_cmds; | 
|  |  | 
|  | if (ipr_transop_timeout) | 
|  | ioa_cfg->transop_timeout = ipr_transop_timeout; | 
|  | else if (dev_id->driver_data & IPR_USE_LONG_TRANSOP_TIMEOUT) | 
|  | ioa_cfg->transop_timeout = IPR_LONG_OPERATIONAL_TIMEOUT; | 
|  | else | 
|  | ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT; | 
|  |  | 
|  | ioa_cfg->revid = pdev->revision; | 
|  |  | 
|  | ipr_init_ioa_cfg(ioa_cfg, host, pdev); | 
|  |  | 
|  | ipr_regs_pci = pci_resource_start(pdev, 0); | 
|  |  | 
|  | rc = pci_request_regions(pdev, IPR_NAME); | 
|  | if (rc < 0) { | 
|  | dev_err(&pdev->dev, | 
|  | "Couldn't register memory range of registers\n"); | 
|  | goto out_scsi_host_put; | 
|  | } | 
|  |  | 
|  | rc = pci_enable_device(pdev); | 
|  |  | 
|  | if (rc || pci_channel_offline(pdev)) { | 
|  | if (pci_channel_offline(pdev)) { | 
|  | ipr_wait_for_pci_err_recovery(ioa_cfg); | 
|  | rc = pci_enable_device(pdev); | 
|  | } | 
|  |  | 
|  | if (rc) { | 
|  | dev_err(&pdev->dev, "Cannot enable adapter\n"); | 
|  | ipr_wait_for_pci_err_recovery(ioa_cfg); | 
|  | goto out_release_regions; | 
|  | } | 
|  | } | 
|  |  | 
|  | ipr_regs = pci_ioremap_bar(pdev, 0); | 
|  |  | 
|  | if (!ipr_regs) { | 
|  | dev_err(&pdev->dev, | 
|  | "Couldn't map memory range of registers\n"); | 
|  | rc = -ENOMEM; | 
|  | goto out_disable; | 
|  | } | 
|  |  | 
|  | ioa_cfg->hdw_dma_regs = ipr_regs; | 
|  | ioa_cfg->hdw_dma_regs_pci = ipr_regs_pci; | 
|  | ioa_cfg->ioa_mailbox = ioa_cfg->chip_cfg->mailbox + ipr_regs; | 
|  |  | 
|  | ipr_init_regs(ioa_cfg); | 
|  |  | 
|  | if (ioa_cfg->sis64) { | 
|  | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); | 
|  | if (rc < 0) { | 
|  | dev_dbg(&pdev->dev, "Failed to set 64 bit PCI DMA mask\n"); | 
|  | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | 
|  | } | 
|  | } else | 
|  | rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); | 
|  |  | 
|  | if (rc < 0) { | 
|  | dev_err(&pdev->dev, "Failed to set PCI DMA mask\n"); | 
|  | goto cleanup_nomem; | 
|  | } | 
|  |  | 
|  | rc = pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, | 
|  | ioa_cfg->chip_cfg->cache_line_size); | 
|  |  | 
|  | if (rc != PCIBIOS_SUCCESSFUL) { | 
|  | dev_err(&pdev->dev, "Write of cache line size failed\n"); | 
|  | ipr_wait_for_pci_err_recovery(ioa_cfg); | 
|  | rc = -EIO; | 
|  | goto cleanup_nomem; | 
|  | } | 
|  |  | 
|  | /* Issue MMIO read to ensure card is not in EEH */ | 
|  | interrupts = readl(ioa_cfg->regs.sense_interrupt_reg); | 
|  | ipr_wait_for_pci_err_recovery(ioa_cfg); | 
|  |  | 
|  | if (ipr_number_of_msix > IPR_MAX_MSIX_VECTORS) { | 
|  | dev_err(&pdev->dev, "The max number of MSIX is %d\n", | 
|  | IPR_MAX_MSIX_VECTORS); | 
|  | ipr_number_of_msix = IPR_MAX_MSIX_VECTORS; | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI && | 
|  | ipr_enable_msix(ioa_cfg) == 0) | 
|  | ioa_cfg->intr_flag = IPR_USE_MSIX; | 
|  | else if (ioa_cfg->ipr_chip->intr_type == IPR_USE_MSI && | 
|  | ipr_enable_msi(ioa_cfg) == 0) | 
|  | ioa_cfg->intr_flag = IPR_USE_MSI; | 
|  | else { | 
|  | ioa_cfg->intr_flag = IPR_USE_LSI; | 
|  | ioa_cfg->nvectors = 1; | 
|  | dev_info(&pdev->dev, "Cannot enable MSI.\n"); | 
|  | } | 
|  |  | 
|  | pci_set_master(pdev); | 
|  |  | 
|  | if (pci_channel_offline(pdev)) { | 
|  | ipr_wait_for_pci_err_recovery(ioa_cfg); | 
|  | pci_set_master(pdev); | 
|  | if (pci_channel_offline(pdev)) { | 
|  | rc = -EIO; | 
|  | goto out_msi_disable; | 
|  | } | 
|  | } | 
|  |  | 
|  | if (ioa_cfg->intr_flag == IPR_USE_MSI || | 
|  | ioa_cfg->intr_flag == IPR_USE_MSIX) { | 
|  | rc = ipr_test_msi(ioa_cfg, pdev); | 
|  | if (rc == -EOPNOTSUPP) { | 
|  | ipr_wait_for_pci_err_recovery(ioa_cfg); | 
|  | if (ioa_cfg->intr_flag == IPR_USE_MSI) { | 
|  | ioa_cfg->intr_flag &= ~IPR_USE_MSI; | 
|  | pci_disable_msi(pdev); | 
|  | } else if (ioa_cfg->intr_flag == IPR_USE_MSIX) { | 
|  | ioa_cfg->intr_flag &= ~IPR_USE_MSIX; | 
|  | pci_disable_msix(pdev); | 
|  | } | 
|  |  | 
|  | ioa_cfg->intr_flag = IPR_USE_LSI; | 
|  | ioa_cfg->nvectors = 1; | 
|  | } | 
|  | else if (rc) | 
|  | goto out_msi_disable; | 
|  | else { | 
|  | if (ioa_cfg->intr_flag == IPR_USE_MSI) | 
|  | dev_info(&pdev->dev, | 
|  | "Request for %d MSIs succeeded with starting IRQ: %d\n", | 
|  | ioa_cfg->nvectors, pdev->irq); | 
|  | else if (ioa_cfg->intr_flag == IPR_USE_MSIX) | 
|  | dev_info(&pdev->dev, | 
|  | "Request for %d MSIXs succeeded.", | 
|  | ioa_cfg->nvectors); | 
|  | } | 
|  | } | 
|  |  | 
|  | ioa_cfg->hrrq_num = min3(ioa_cfg->nvectors, | 
|  | (unsigned int)num_online_cpus(), | 
|  | (unsigned int)IPR_MAX_HRRQ_NUM); | 
|  |  | 
|  | if ((rc = ipr_save_pcix_cmd_reg(ioa_cfg))) | 
|  | goto out_msi_disable; | 
|  |  | 
|  | if ((rc = ipr_set_pcix_cmd_reg(ioa_cfg))) | 
|  | goto out_msi_disable; | 
|  |  | 
|  | rc = ipr_alloc_mem(ioa_cfg); | 
|  | if (rc < 0) { | 
|  | dev_err(&pdev->dev, | 
|  | "Couldn't allocate enough memory for device driver!\n"); | 
|  | goto out_msi_disable; | 
|  | } | 
|  |  | 
|  | /* Save away PCI config space for use following IOA reset */ | 
|  | rc = pci_save_state(pdev); | 
|  |  | 
|  | if (rc != PCIBIOS_SUCCESSFUL) { | 
|  | dev_err(&pdev->dev, "Failed to save PCI config space\n"); | 
|  | rc = -EIO; | 
|  | goto cleanup_nolog; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If HRRQ updated interrupt is not masked, or reset alert is set, | 
|  | * the card is in an unknown state and needs a hard reset | 
|  | */ | 
|  | mask = readl(ioa_cfg->regs.sense_interrupt_mask_reg32); | 
|  | interrupts = readl(ioa_cfg->regs.sense_interrupt_reg32); | 
|  | uproc = readl(ioa_cfg->regs.sense_uproc_interrupt_reg32); | 
|  | if ((mask & IPR_PCII_HRRQ_UPDATED) == 0 || (uproc & IPR_UPROCI_RESET_ALERT)) | 
|  | ioa_cfg->needs_hard_reset = 1; | 
|  | if ((interrupts & IPR_PCII_ERROR_INTERRUPTS) || reset_devices) | 
|  | ioa_cfg->needs_hard_reset = 1; | 
|  | if (interrupts & IPR_PCII_IOA_UNIT_CHECKED) | 
|  | ioa_cfg->ioa_unit_checked = 1; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | ipr_mask_and_clear_interrupts(ioa_cfg, ~IPR_PCII_IOA_TRANS_TO_OPER); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  |  | 
|  | if (ioa_cfg->intr_flag == IPR_USE_MSI | 
|  | || ioa_cfg->intr_flag == IPR_USE_MSIX) { | 
|  | name_msi_vectors(ioa_cfg); | 
|  | rc = request_irq(ioa_cfg->vectors_info[0].vec, ipr_isr, | 
|  | 0, | 
|  | ioa_cfg->vectors_info[0].desc, | 
|  | &ioa_cfg->hrrq[0]); | 
|  | if (!rc) | 
|  | rc = ipr_request_other_msi_irqs(ioa_cfg); | 
|  | } else { | 
|  | rc = request_irq(pdev->irq, ipr_isr, | 
|  | IRQF_SHARED, | 
|  | IPR_NAME, &ioa_cfg->hrrq[0]); | 
|  | } | 
|  | if (rc) { | 
|  | dev_err(&pdev->dev, "Couldn't register IRQ %d! rc=%d\n", | 
|  | pdev->irq, rc); | 
|  | goto cleanup_nolog; | 
|  | } | 
|  |  | 
|  | if ((dev_id->driver_data & IPR_USE_PCI_WARM_RESET) || | 
|  | (dev_id->device == PCI_DEVICE_ID_IBM_OBSIDIAN_E && !ioa_cfg->revid)) { | 
|  | ioa_cfg->needs_warm_reset = 1; | 
|  | ioa_cfg->reset = ipr_reset_slot_reset; | 
|  | } else | 
|  | ioa_cfg->reset = ipr_reset_start_bist; | 
|  |  | 
|  | spin_lock_irqsave(&ipr_driver_lock, driver_lock_flags); | 
|  | list_add_tail(&ioa_cfg->queue, &ipr_ioa_head); | 
|  | spin_unlock_irqrestore(&ipr_driver_lock, driver_lock_flags); | 
|  |  | 
|  | LEAVE; | 
|  | out: | 
|  | return rc; | 
|  |  | 
|  | cleanup_nolog: | 
|  | ipr_free_mem(ioa_cfg); | 
|  | out_msi_disable: | 
|  | ipr_wait_for_pci_err_recovery(ioa_cfg); | 
|  | if (ioa_cfg->intr_flag == IPR_USE_MSI) | 
|  | pci_disable_msi(pdev); | 
|  | else if (ioa_cfg->intr_flag == IPR_USE_MSIX) | 
|  | pci_disable_msix(pdev); | 
|  | cleanup_nomem: | 
|  | iounmap(ipr_regs); | 
|  | out_disable: | 
|  | pci_disable_device(pdev); | 
|  | out_release_regions: | 
|  | pci_release_regions(pdev); | 
|  | out_scsi_host_put: | 
|  | scsi_host_put(host); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_scan_vsets - Scans for VSET devices | 
|  | * @ioa_cfg:	ioa config struct | 
|  | * | 
|  | * Description: Since the VSET resources do not follow SAM in that we can have | 
|  | * sparse LUNs with no LUN 0, we have to scan for these ourselves. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_scan_vsets(struct ipr_ioa_cfg *ioa_cfg) | 
|  | { | 
|  | int target, lun; | 
|  |  | 
|  | for (target = 0; target < IPR_MAX_NUM_TARGETS_PER_BUS; target++) | 
|  | for (lun = 0; lun < IPR_MAX_NUM_VSET_LUNS_PER_TARGET; lun++) | 
|  | scsi_add_device(ioa_cfg->host, IPR_VSET_BUS, target, lun); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_initiate_ioa_bringdown - Bring down an adapter | 
|  | * @ioa_cfg:		ioa config struct | 
|  | * @shutdown_type:	shutdown type | 
|  | * | 
|  | * Description: This function will initiate bringing down the adapter. | 
|  | * This consists of issuing an IOA shutdown to the adapter | 
|  | * to flush the cache, and running BIST. | 
|  | * If the caller needs to wait on the completion of the reset, | 
|  | * the caller must sleep on the reset_wait_q. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_initiate_ioa_bringdown(struct ipr_ioa_cfg *ioa_cfg, | 
|  | enum ipr_shutdown_type shutdown_type) | 
|  | { | 
|  | ENTER; | 
|  | if (ioa_cfg->sdt_state == WAIT_FOR_DUMP) | 
|  | ioa_cfg->sdt_state = ABORT_DUMP; | 
|  | ioa_cfg->reset_retries = 0; | 
|  | ioa_cfg->in_ioa_bringdown = 1; | 
|  | ipr_initiate_ioa_reset(ioa_cfg, shutdown_type); | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * __ipr_remove - Remove a single adapter | 
|  | * @pdev:	pci device struct | 
|  | * | 
|  | * Adapter hot plug remove entry point. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void __ipr_remove(struct pci_dev *pdev) | 
|  | { | 
|  | unsigned long host_lock_flags = 0; | 
|  | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); | 
|  | int i; | 
|  | unsigned long driver_lock_flags; | 
|  | ENTER; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); | 
|  | while (ioa_cfg->in_reset_reload) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); | 
|  | } | 
|  |  | 
|  | for (i = 0; i < ioa_cfg->hrrq_num; i++) { | 
|  | spin_lock(&ioa_cfg->hrrq[i]._lock); | 
|  | ioa_cfg->hrrq[i].removing_ioa = 1; | 
|  | spin_unlock(&ioa_cfg->hrrq[i]._lock); | 
|  | } | 
|  | wmb(); | 
|  | ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL); | 
|  |  | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | flush_work(&ioa_cfg->work_q); | 
|  | INIT_LIST_HEAD(&ioa_cfg->used_res_q); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags); | 
|  |  | 
|  | spin_lock_irqsave(&ipr_driver_lock, driver_lock_flags); | 
|  | list_del(&ioa_cfg->queue); | 
|  | spin_unlock_irqrestore(&ipr_driver_lock, driver_lock_flags); | 
|  |  | 
|  | if (ioa_cfg->sdt_state == ABORT_DUMP) | 
|  | ioa_cfg->sdt_state = WAIT_FOR_DUMP; | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags); | 
|  |  | 
|  | ipr_free_all_resources(ioa_cfg); | 
|  |  | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_remove - IOA hot plug remove entry point | 
|  | * @pdev:	pci device struct | 
|  | * | 
|  | * Adapter hot plug remove entry point. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_remove(struct pci_dev *pdev) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); | 
|  |  | 
|  | ENTER; | 
|  |  | 
|  | ipr_remove_trace_file(&ioa_cfg->host->shost_dev.kobj, | 
|  | &ipr_trace_attr); | 
|  | ipr_remove_dump_file(&ioa_cfg->host->shost_dev.kobj, | 
|  | &ipr_dump_attr); | 
|  | scsi_remove_host(ioa_cfg->host); | 
|  |  | 
|  | __ipr_remove(pdev); | 
|  |  | 
|  | LEAVE; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_probe - Adapter hot plug add entry point | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / non-zero on failure | 
|  | **/ | 
|  | static int ipr_probe(struct pci_dev *pdev, const struct pci_device_id *dev_id) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | int rc, i; | 
|  |  | 
|  | rc = ipr_probe_ioa(pdev, dev_id); | 
|  |  | 
|  | if (rc) | 
|  | return rc; | 
|  |  | 
|  | ioa_cfg = pci_get_drvdata(pdev); | 
|  | rc = ipr_probe_ioa_part2(ioa_cfg); | 
|  |  | 
|  | if (rc) { | 
|  | __ipr_remove(pdev); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | rc = scsi_add_host(ioa_cfg->host, &pdev->dev); | 
|  |  | 
|  | if (rc) { | 
|  | __ipr_remove(pdev); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | rc = ipr_create_trace_file(&ioa_cfg->host->shost_dev.kobj, | 
|  | &ipr_trace_attr); | 
|  |  | 
|  | if (rc) { | 
|  | scsi_remove_host(ioa_cfg->host); | 
|  | __ipr_remove(pdev); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | rc = ipr_create_dump_file(&ioa_cfg->host->shost_dev.kobj, | 
|  | &ipr_dump_attr); | 
|  |  | 
|  | if (rc) { | 
|  | ipr_remove_trace_file(&ioa_cfg->host->shost_dev.kobj, | 
|  | &ipr_trace_attr); | 
|  | scsi_remove_host(ioa_cfg->host); | 
|  | __ipr_remove(pdev); | 
|  | return rc; | 
|  | } | 
|  |  | 
|  | scsi_scan_host(ioa_cfg->host); | 
|  | ipr_scan_vsets(ioa_cfg); | 
|  | scsi_add_device(ioa_cfg->host, IPR_IOA_BUS, IPR_IOA_TARGET, IPR_IOA_LUN); | 
|  | ioa_cfg->allow_ml_add_del = 1; | 
|  | ioa_cfg->host->max_channel = IPR_VSET_BUS; | 
|  | ioa_cfg->iopoll_weight = ioa_cfg->chip_cfg->iopoll_weight; | 
|  |  | 
|  | if (ioa_cfg->iopoll_weight && ioa_cfg->sis64 && ioa_cfg->nvectors > 1) { | 
|  | for (i = 1; i < ioa_cfg->hrrq_num; i++) { | 
|  | blk_iopoll_init(&ioa_cfg->hrrq[i].iopoll, | 
|  | ioa_cfg->iopoll_weight, ipr_iopoll); | 
|  | blk_iopoll_enable(&ioa_cfg->hrrq[i].iopoll); | 
|  | } | 
|  | } | 
|  |  | 
|  | schedule_work(&ioa_cfg->work_q); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_shutdown - Shutdown handler. | 
|  | * @pdev:	pci device struct | 
|  | * | 
|  | * This function is invoked upon system shutdown/reboot. It will issue | 
|  | * an adapter shutdown to the adapter to flush the write cache. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_shutdown(struct pci_dev *pdev) | 
|  | { | 
|  | struct ipr_ioa_cfg *ioa_cfg = pci_get_drvdata(pdev); | 
|  | unsigned long lock_flags = 0; | 
|  | int i; | 
|  |  | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | if (ioa_cfg->iopoll_weight && ioa_cfg->sis64 && ioa_cfg->nvectors > 1) { | 
|  | ioa_cfg->iopoll_weight = 0; | 
|  | for (i = 1; i < ioa_cfg->hrrq_num; i++) | 
|  | blk_iopoll_disable(&ioa_cfg->hrrq[i].iopoll); | 
|  | } | 
|  |  | 
|  | while (ioa_cfg->in_reset_reload) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); | 
|  | } | 
|  |  | 
|  | ipr_initiate_ioa_bringdown(ioa_cfg, IPR_SHUTDOWN_NORMAL); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); | 
|  | wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload); | 
|  | } | 
|  |  | 
|  | static struct pci_device_id ipr_pci_table[] = { | 
|  | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5702, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_5703, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573D, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_MYLEX, PCI_DEVICE_ID_IBM_GEMSTONE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_573E, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571B, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572E, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571A, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CITRINE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575B, 0, 0, | 
|  | IPR_USE_LONG_TRANSOP_TIMEOUT }, | 
|  | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0, | 
|  | IPR_USE_LONG_TRANSOP_TIMEOUT }, | 
|  | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0, | 
|  | IPR_USE_LONG_TRANSOP_TIMEOUT }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572A, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572B, 0, 0, | 
|  | IPR_USE_LONG_TRANSOP_TIMEOUT}, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C, 0, 0, | 
|  | IPR_USE_LONG_TRANSOP_TIMEOUT }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574E, 0, 0, | 
|  | IPR_USE_LONG_TRANSOP_TIMEOUT }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B3, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57CC, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7, 0, 0, | 
|  | IPR_USE_LONG_TRANSOP_TIMEOUT | IPR_USE_PCI_WARM_RESET }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_SNIPE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2780, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571E, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_571F, 0, 0, | 
|  | IPR_USE_LONG_TRANSOP_TIMEOUT }, | 
|  | { PCI_VENDOR_ID_ADAPTEC2, PCI_DEVICE_ID_ADAPTEC2_SCAMP, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_572F, 0, 0, | 
|  | IPR_USE_LONG_TRANSOP_TIMEOUT }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B5, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_574D, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B2, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C0, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C3, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROC_FPGA_E2, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C4, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B4, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B1, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C6, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57C8, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57CE, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57D5, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57D6, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57D7, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57D8, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57D9, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57DA, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57EB, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57EC, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57ED, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57EE, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57EF, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57F0, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2CCA, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2CD2, 0, 0, 0 }, | 
|  | { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CROCODILE, | 
|  | PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_2CCD, 0, 0, 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(pci, ipr_pci_table); | 
|  |  | 
|  | static const struct pci_error_handlers ipr_err_handler = { | 
|  | .error_detected = ipr_pci_error_detected, | 
|  | .mmio_enabled = ipr_pci_mmio_enabled, | 
|  | .slot_reset = ipr_pci_slot_reset, | 
|  | }; | 
|  |  | 
|  | static struct pci_driver ipr_driver = { | 
|  | .name = IPR_NAME, | 
|  | .id_table = ipr_pci_table, | 
|  | .probe = ipr_probe, | 
|  | .remove = ipr_remove, | 
|  | .shutdown = ipr_shutdown, | 
|  | .err_handler = &ipr_err_handler, | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_halt_done - Shutdown prepare completion | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void ipr_halt_done(struct ipr_cmnd *ipr_cmd) | 
|  | { | 
|  | list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_halt - Issue shutdown prepare to all adapters | 
|  | * | 
|  | * Return value: | 
|  | * 	NOTIFY_OK on success / NOTIFY_DONE on failure | 
|  | **/ | 
|  | static int ipr_halt(struct notifier_block *nb, ulong event, void *buf) | 
|  | { | 
|  | struct ipr_cmnd *ipr_cmd; | 
|  | struct ipr_ioa_cfg *ioa_cfg; | 
|  | unsigned long flags = 0, driver_lock_flags; | 
|  |  | 
|  | if (event != SYS_RESTART && event != SYS_HALT && event != SYS_POWER_OFF) | 
|  | return NOTIFY_DONE; | 
|  |  | 
|  | spin_lock_irqsave(&ipr_driver_lock, driver_lock_flags); | 
|  |  | 
|  | list_for_each_entry(ioa_cfg, &ipr_ioa_head, queue) { | 
|  | spin_lock_irqsave(ioa_cfg->host->host_lock, flags); | 
|  | if (!ioa_cfg->hrrq[IPR_INIT_HRRQ].allow_cmds) { | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | ipr_cmd = ipr_get_free_ipr_cmnd(ioa_cfg); | 
|  | ipr_cmd->ioarcb.res_handle = cpu_to_be32(IPR_IOA_RES_HANDLE); | 
|  | ipr_cmd->ioarcb.cmd_pkt.request_type = IPR_RQTYPE_IOACMD; | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[0] = IPR_IOA_SHUTDOWN; | 
|  | ipr_cmd->ioarcb.cmd_pkt.cdb[1] = IPR_SHUTDOWN_PREPARE_FOR_NORMAL; | 
|  |  | 
|  | ipr_do_req(ipr_cmd, ipr_halt_done, ipr_timeout, IPR_DEVICE_RESET_TIMEOUT); | 
|  | spin_unlock_irqrestore(ioa_cfg->host->host_lock, flags); | 
|  | } | 
|  | spin_unlock_irqrestore(&ipr_driver_lock, driver_lock_flags); | 
|  |  | 
|  | return NOTIFY_OK; | 
|  | } | 
|  |  | 
|  | static struct notifier_block ipr_notifier = { | 
|  | ipr_halt, NULL, 0 | 
|  | }; | 
|  |  | 
|  | /** | 
|  | * ipr_init - Module entry point | 
|  | * | 
|  | * Return value: | 
|  | * 	0 on success / negative value on failure | 
|  | **/ | 
|  | static int __init ipr_init(void) | 
|  | { | 
|  | ipr_info("IBM Power RAID SCSI Device Driver version: %s %s\n", | 
|  | IPR_DRIVER_VERSION, IPR_DRIVER_DATE); | 
|  |  | 
|  | register_reboot_notifier(&ipr_notifier); | 
|  | return pci_register_driver(&ipr_driver); | 
|  | } | 
|  |  | 
|  | /** | 
|  | * ipr_exit - Module unload | 
|  | * | 
|  | * Module unload entry point. | 
|  | * | 
|  | * Return value: | 
|  | * 	none | 
|  | **/ | 
|  | static void __exit ipr_exit(void) | 
|  | { | 
|  | unregister_reboot_notifier(&ipr_notifier); | 
|  | pci_unregister_driver(&ipr_driver); | 
|  | } | 
|  |  | 
|  | module_init(ipr_init); | 
|  | module_exit(ipr_exit); |