|  | /* | 
|  | * Copyright (c) 2000-2005 Silicon Graphics, Inc. | 
|  | * All Rights Reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or | 
|  | * modify it under the terms of the GNU General Public License as | 
|  | * published by the Free Software Foundation. | 
|  | * | 
|  | * This program is distributed in the hope that it would be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, write the Free Software Foundation, | 
|  | * Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA | 
|  | */ | 
|  | #include "xfs.h" | 
|  | #include "xfs_fs.h" | 
|  | #include "xfs_bit.h" | 
|  | #include "xfs_log.h" | 
|  | #include "xfs_inum.h" | 
|  | #include "xfs_sb.h" | 
|  | #include "xfs_ag.h" | 
|  | #include "xfs_trans.h" | 
|  | #include "xfs_mount.h" | 
|  | #include "xfs_bmap_btree.h" | 
|  | #include "xfs_alloc.h" | 
|  | #include "xfs_dinode.h" | 
|  | #include "xfs_inode.h" | 
|  | #include "xfs_inode_item.h" | 
|  | #include "xfs_bmap.h" | 
|  | #include "xfs_error.h" | 
|  | #include "xfs_vnodeops.h" | 
|  | #include "xfs_da_btree.h" | 
|  | #include "xfs_ioctl.h" | 
|  | #include "xfs_trace.h" | 
|  |  | 
|  | #include <linux/dcache.h> | 
|  | #include <linux/falloc.h> | 
|  |  | 
|  | static const struct vm_operations_struct xfs_file_vm_ops; | 
|  |  | 
|  | /* | 
|  | * Locking primitives for read and write IO paths to ensure we consistently use | 
|  | * and order the inode->i_mutex, ip->i_lock and ip->i_iolock. | 
|  | */ | 
|  | static inline void | 
|  | xfs_rw_ilock( | 
|  | struct xfs_inode	*ip, | 
|  | int			type) | 
|  | { | 
|  | if (type & XFS_IOLOCK_EXCL) | 
|  | mutex_lock(&VFS_I(ip)->i_mutex); | 
|  | xfs_ilock(ip, type); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | xfs_rw_iunlock( | 
|  | struct xfs_inode	*ip, | 
|  | int			type) | 
|  | { | 
|  | xfs_iunlock(ip, type); | 
|  | if (type & XFS_IOLOCK_EXCL) | 
|  | mutex_unlock(&VFS_I(ip)->i_mutex); | 
|  | } | 
|  |  | 
|  | static inline void | 
|  | xfs_rw_ilock_demote( | 
|  | struct xfs_inode	*ip, | 
|  | int			type) | 
|  | { | 
|  | xfs_ilock_demote(ip, type); | 
|  | if (type & XFS_IOLOCK_EXCL) | 
|  | mutex_unlock(&VFS_I(ip)->i_mutex); | 
|  | } | 
|  |  | 
|  | /* | 
|  | *	xfs_iozero | 
|  | * | 
|  | *	xfs_iozero clears the specified range of buffer supplied, | 
|  | *	and marks all the affected blocks as valid and modified.  If | 
|  | *	an affected block is not allocated, it will be allocated.  If | 
|  | *	an affected block is not completely overwritten, and is not | 
|  | *	valid before the operation, it will be read from disk before | 
|  | *	being partially zeroed. | 
|  | */ | 
|  | STATIC int | 
|  | xfs_iozero( | 
|  | struct xfs_inode	*ip,	/* inode			*/ | 
|  | loff_t			pos,	/* offset in file		*/ | 
|  | size_t			count)	/* size of data to zero		*/ | 
|  | { | 
|  | struct page		*page; | 
|  | struct address_space	*mapping; | 
|  | int			status; | 
|  |  | 
|  | mapping = VFS_I(ip)->i_mapping; | 
|  | do { | 
|  | unsigned offset, bytes; | 
|  | void *fsdata; | 
|  |  | 
|  | offset = (pos & (PAGE_CACHE_SIZE -1)); /* Within page */ | 
|  | bytes = PAGE_CACHE_SIZE - offset; | 
|  | if (bytes > count) | 
|  | bytes = count; | 
|  |  | 
|  | status = pagecache_write_begin(NULL, mapping, pos, bytes, | 
|  | AOP_FLAG_UNINTERRUPTIBLE, | 
|  | &page, &fsdata); | 
|  | if (status) | 
|  | break; | 
|  |  | 
|  | zero_user(page, offset, bytes); | 
|  |  | 
|  | status = pagecache_write_end(NULL, mapping, pos, bytes, bytes, | 
|  | page, fsdata); | 
|  | WARN_ON(status <= 0); /* can't return less than zero! */ | 
|  | pos += bytes; | 
|  | count -= bytes; | 
|  | status = 0; | 
|  | } while (count); | 
|  |  | 
|  | return (-status); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Fsync operations on directories are much simpler than on regular files, | 
|  | * as there is no file data to flush, and thus also no need for explicit | 
|  | * cache flush operations, and there are no non-transaction metadata updates | 
|  | * on directories either. | 
|  | */ | 
|  | STATIC int | 
|  | xfs_dir_fsync( | 
|  | struct file		*file, | 
|  | loff_t			start, | 
|  | loff_t			end, | 
|  | int			datasync) | 
|  | { | 
|  | struct xfs_inode	*ip = XFS_I(file->f_mapping->host); | 
|  | struct xfs_mount	*mp = ip->i_mount; | 
|  | xfs_lsn_t		lsn = 0; | 
|  |  | 
|  | trace_xfs_dir_fsync(ip); | 
|  |  | 
|  | xfs_ilock(ip, XFS_ILOCK_SHARED); | 
|  | if (xfs_ipincount(ip)) | 
|  | lsn = ip->i_itemp->ili_last_lsn; | 
|  | xfs_iunlock(ip, XFS_ILOCK_SHARED); | 
|  |  | 
|  | if (!lsn) | 
|  | return 0; | 
|  | return _xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, NULL); | 
|  | } | 
|  |  | 
|  | STATIC int | 
|  | xfs_file_fsync( | 
|  | struct file		*file, | 
|  | loff_t			start, | 
|  | loff_t			end, | 
|  | int			datasync) | 
|  | { | 
|  | struct inode		*inode = file->f_mapping->host; | 
|  | struct xfs_inode	*ip = XFS_I(inode); | 
|  | struct xfs_mount	*mp = ip->i_mount; | 
|  | int			error = 0; | 
|  | int			log_flushed = 0; | 
|  | xfs_lsn_t		lsn = 0; | 
|  |  | 
|  | trace_xfs_file_fsync(ip); | 
|  |  | 
|  | error = filemap_write_and_wait_range(inode->i_mapping, start, end); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | if (XFS_FORCED_SHUTDOWN(mp)) | 
|  | return -XFS_ERROR(EIO); | 
|  |  | 
|  | xfs_iflags_clear(ip, XFS_ITRUNCATED); | 
|  |  | 
|  | if (mp->m_flags & XFS_MOUNT_BARRIER) { | 
|  | /* | 
|  | * If we have an RT and/or log subvolume we need to make sure | 
|  | * to flush the write cache the device used for file data | 
|  | * first.  This is to ensure newly written file data make | 
|  | * it to disk before logging the new inode size in case of | 
|  | * an extending write. | 
|  | */ | 
|  | if (XFS_IS_REALTIME_INODE(ip)) | 
|  | xfs_blkdev_issue_flush(mp->m_rtdev_targp); | 
|  | else if (mp->m_logdev_targp != mp->m_ddev_targp) | 
|  | xfs_blkdev_issue_flush(mp->m_ddev_targp); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * All metadata updates are logged, which means that we just have | 
|  | * to flush the log up to the latest LSN that touched the inode. | 
|  | */ | 
|  | xfs_ilock(ip, XFS_ILOCK_SHARED); | 
|  | if (xfs_ipincount(ip)) { | 
|  | if (!datasync || | 
|  | (ip->i_itemp->ili_fields & ~XFS_ILOG_TIMESTAMP)) | 
|  | lsn = ip->i_itemp->ili_last_lsn; | 
|  | } | 
|  | xfs_iunlock(ip, XFS_ILOCK_SHARED); | 
|  |  | 
|  | if (lsn) | 
|  | error = _xfs_log_force_lsn(mp, lsn, XFS_LOG_SYNC, &log_flushed); | 
|  |  | 
|  | /* | 
|  | * If we only have a single device, and the log force about was | 
|  | * a no-op we might have to flush the data device cache here. | 
|  | * This can only happen for fdatasync/O_DSYNC if we were overwriting | 
|  | * an already allocated file and thus do not have any metadata to | 
|  | * commit. | 
|  | */ | 
|  | if ((mp->m_flags & XFS_MOUNT_BARRIER) && | 
|  | mp->m_logdev_targp == mp->m_ddev_targp && | 
|  | !XFS_IS_REALTIME_INODE(ip) && | 
|  | !log_flushed) | 
|  | xfs_blkdev_issue_flush(mp->m_ddev_targp); | 
|  |  | 
|  | return -error; | 
|  | } | 
|  |  | 
|  | STATIC ssize_t | 
|  | xfs_file_aio_read( | 
|  | struct kiocb		*iocb, | 
|  | const struct iovec	*iovp, | 
|  | unsigned long		nr_segs, | 
|  | loff_t			pos) | 
|  | { | 
|  | struct file		*file = iocb->ki_filp; | 
|  | struct inode		*inode = file->f_mapping->host; | 
|  | struct xfs_inode	*ip = XFS_I(inode); | 
|  | struct xfs_mount	*mp = ip->i_mount; | 
|  | size_t			size = 0; | 
|  | ssize_t			ret = 0; | 
|  | int			ioflags = 0; | 
|  | xfs_fsize_t		n; | 
|  | unsigned long		seg; | 
|  |  | 
|  | XFS_STATS_INC(xs_read_calls); | 
|  |  | 
|  | BUG_ON(iocb->ki_pos != pos); | 
|  |  | 
|  | if (unlikely(file->f_flags & O_DIRECT)) | 
|  | ioflags |= IO_ISDIRECT; | 
|  | if (file->f_mode & FMODE_NOCMTIME) | 
|  | ioflags |= IO_INVIS; | 
|  |  | 
|  | /* START copy & waste from filemap.c */ | 
|  | for (seg = 0; seg < nr_segs; seg++) { | 
|  | const struct iovec *iv = &iovp[seg]; | 
|  |  | 
|  | /* | 
|  | * If any segment has a negative length, or the cumulative | 
|  | * length ever wraps negative then return -EINVAL. | 
|  | */ | 
|  | size += iv->iov_len; | 
|  | if (unlikely((ssize_t)(size|iv->iov_len) < 0)) | 
|  | return XFS_ERROR(-EINVAL); | 
|  | } | 
|  | /* END copy & waste from filemap.c */ | 
|  |  | 
|  | if (unlikely(ioflags & IO_ISDIRECT)) { | 
|  | xfs_buftarg_t	*target = | 
|  | XFS_IS_REALTIME_INODE(ip) ? | 
|  | mp->m_rtdev_targp : mp->m_ddev_targp; | 
|  | if ((iocb->ki_pos & target->bt_smask) || | 
|  | (size & target->bt_smask)) { | 
|  | if (iocb->ki_pos == i_size_read(inode)) | 
|  | return 0; | 
|  | return -XFS_ERROR(EINVAL); | 
|  | } | 
|  | } | 
|  |  | 
|  | n = XFS_MAXIOFFSET(mp) - iocb->ki_pos; | 
|  | if (n <= 0 || size == 0) | 
|  | return 0; | 
|  |  | 
|  | if (n < size) | 
|  | size = n; | 
|  |  | 
|  | if (XFS_FORCED_SHUTDOWN(mp)) | 
|  | return -EIO; | 
|  |  | 
|  | /* | 
|  | * Locking is a bit tricky here. If we take an exclusive lock | 
|  | * for direct IO, we effectively serialise all new concurrent | 
|  | * read IO to this file and block it behind IO that is currently in | 
|  | * progress because IO in progress holds the IO lock shared. We only | 
|  | * need to hold the lock exclusive to blow away the page cache, so | 
|  | * only take lock exclusively if the page cache needs invalidation. | 
|  | * This allows the normal direct IO case of no page cache pages to | 
|  | * proceeed concurrently without serialisation. | 
|  | */ | 
|  | xfs_rw_ilock(ip, XFS_IOLOCK_SHARED); | 
|  | if ((ioflags & IO_ISDIRECT) && inode->i_mapping->nrpages) { | 
|  | xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED); | 
|  | xfs_rw_ilock(ip, XFS_IOLOCK_EXCL); | 
|  |  | 
|  | if (inode->i_mapping->nrpages) { | 
|  | ret = -xfs_flushinval_pages(ip, | 
|  | (iocb->ki_pos & PAGE_CACHE_MASK), | 
|  | -1, FI_REMAPF_LOCKED); | 
|  | if (ret) { | 
|  | xfs_rw_iunlock(ip, XFS_IOLOCK_EXCL); | 
|  | return ret; | 
|  | } | 
|  | } | 
|  | xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL); | 
|  | } | 
|  |  | 
|  | trace_xfs_file_read(ip, size, iocb->ki_pos, ioflags); | 
|  |  | 
|  | ret = generic_file_aio_read(iocb, iovp, nr_segs, iocb->ki_pos); | 
|  | if (ret > 0) | 
|  | XFS_STATS_ADD(xs_read_bytes, ret); | 
|  |  | 
|  | xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | STATIC ssize_t | 
|  | xfs_file_splice_read( | 
|  | struct file		*infilp, | 
|  | loff_t			*ppos, | 
|  | struct pipe_inode_info	*pipe, | 
|  | size_t			count, | 
|  | unsigned int		flags) | 
|  | { | 
|  | struct xfs_inode	*ip = XFS_I(infilp->f_mapping->host); | 
|  | int			ioflags = 0; | 
|  | ssize_t			ret; | 
|  |  | 
|  | XFS_STATS_INC(xs_read_calls); | 
|  |  | 
|  | if (infilp->f_mode & FMODE_NOCMTIME) | 
|  | ioflags |= IO_INVIS; | 
|  |  | 
|  | if (XFS_FORCED_SHUTDOWN(ip->i_mount)) | 
|  | return -EIO; | 
|  |  | 
|  | xfs_rw_ilock(ip, XFS_IOLOCK_SHARED); | 
|  |  | 
|  | trace_xfs_file_splice_read(ip, count, *ppos, ioflags); | 
|  |  | 
|  | ret = generic_file_splice_read(infilp, ppos, pipe, count, flags); | 
|  | if (ret > 0) | 
|  | XFS_STATS_ADD(xs_read_bytes, ret); | 
|  |  | 
|  | xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * xfs_file_splice_write() does not use xfs_rw_ilock() because | 
|  | * generic_file_splice_write() takes the i_mutex itself. This, in theory, | 
|  | * couuld cause lock inversions between the aio_write path and the splice path | 
|  | * if someone is doing concurrent splice(2) based writes and write(2) based | 
|  | * writes to the same inode. The only real way to fix this is to re-implement | 
|  | * the generic code here with correct locking orders. | 
|  | */ | 
|  | STATIC ssize_t | 
|  | xfs_file_splice_write( | 
|  | struct pipe_inode_info	*pipe, | 
|  | struct file		*outfilp, | 
|  | loff_t			*ppos, | 
|  | size_t			count, | 
|  | unsigned int		flags) | 
|  | { | 
|  | struct inode		*inode = outfilp->f_mapping->host; | 
|  | struct xfs_inode	*ip = XFS_I(inode); | 
|  | int			ioflags = 0; | 
|  | ssize_t			ret; | 
|  |  | 
|  | XFS_STATS_INC(xs_write_calls); | 
|  |  | 
|  | if (outfilp->f_mode & FMODE_NOCMTIME) | 
|  | ioflags |= IO_INVIS; | 
|  |  | 
|  | if (XFS_FORCED_SHUTDOWN(ip->i_mount)) | 
|  | return -EIO; | 
|  |  | 
|  | xfs_ilock(ip, XFS_IOLOCK_EXCL); | 
|  |  | 
|  | trace_xfs_file_splice_write(ip, count, *ppos, ioflags); | 
|  |  | 
|  | ret = generic_file_splice_write(pipe, outfilp, ppos, count, flags); | 
|  | if (ret > 0) | 
|  | XFS_STATS_ADD(xs_write_bytes, ret); | 
|  |  | 
|  | xfs_iunlock(ip, XFS_IOLOCK_EXCL); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * This routine is called to handle zeroing any space in the last | 
|  | * block of the file that is beyond the EOF.  We do this since the | 
|  | * size is being increased without writing anything to that block | 
|  | * and we don't want anyone to read the garbage on the disk. | 
|  | */ | 
|  | STATIC int				/* error (positive) */ | 
|  | xfs_zero_last_block( | 
|  | xfs_inode_t	*ip, | 
|  | xfs_fsize_t	offset, | 
|  | xfs_fsize_t	isize) | 
|  | { | 
|  | xfs_fileoff_t	last_fsb; | 
|  | xfs_mount_t	*mp = ip->i_mount; | 
|  | int		nimaps; | 
|  | int		zero_offset; | 
|  | int		zero_len; | 
|  | int		error = 0; | 
|  | xfs_bmbt_irec_t	imap; | 
|  |  | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL)); | 
|  |  | 
|  | zero_offset = XFS_B_FSB_OFFSET(mp, isize); | 
|  | if (zero_offset == 0) { | 
|  | /* | 
|  | * There are no extra bytes in the last block on disk to | 
|  | * zero, so return. | 
|  | */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | last_fsb = XFS_B_TO_FSBT(mp, isize); | 
|  | nimaps = 1; | 
|  | error = xfs_bmapi_read(ip, last_fsb, 1, &imap, &nimaps, 0); | 
|  | if (error) | 
|  | return error; | 
|  | ASSERT(nimaps > 0); | 
|  | /* | 
|  | * If the block underlying isize is just a hole, then there | 
|  | * is nothing to zero. | 
|  | */ | 
|  | if (imap.br_startblock == HOLESTARTBLOCK) { | 
|  | return 0; | 
|  | } | 
|  | /* | 
|  | * Zero the part of the last block beyond the EOF, and write it | 
|  | * out sync.  We need to drop the ilock while we do this so we | 
|  | * don't deadlock when the buffer cache calls back to us. | 
|  | */ | 
|  | xfs_iunlock(ip, XFS_ILOCK_EXCL); | 
|  |  | 
|  | zero_len = mp->m_sb.sb_blocksize - zero_offset; | 
|  | if (isize + zero_len > offset) | 
|  | zero_len = offset - isize; | 
|  | error = xfs_iozero(ip, isize, zero_len); | 
|  |  | 
|  | xfs_ilock(ip, XFS_ILOCK_EXCL); | 
|  | ASSERT(error >= 0); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Zero any on disk space between the current EOF and the new, | 
|  | * larger EOF.  This handles the normal case of zeroing the remainder | 
|  | * of the last block in the file and the unusual case of zeroing blocks | 
|  | * out beyond the size of the file.  This second case only happens | 
|  | * with fixed size extents and when the system crashes before the inode | 
|  | * size was updated but after blocks were allocated.  If fill is set, | 
|  | * then any holes in the range are filled and zeroed.  If not, the holes | 
|  | * are left alone as holes. | 
|  | */ | 
|  |  | 
|  | int					/* error (positive) */ | 
|  | xfs_zero_eof( | 
|  | xfs_inode_t	*ip, | 
|  | xfs_off_t	offset,		/* starting I/O offset */ | 
|  | xfs_fsize_t	isize)		/* current inode size */ | 
|  | { | 
|  | xfs_mount_t	*mp = ip->i_mount; | 
|  | xfs_fileoff_t	start_zero_fsb; | 
|  | xfs_fileoff_t	end_zero_fsb; | 
|  | xfs_fileoff_t	zero_count_fsb; | 
|  | xfs_fileoff_t	last_fsb; | 
|  | xfs_fileoff_t	zero_off; | 
|  | xfs_fsize_t	zero_len; | 
|  | int		nimaps; | 
|  | int		error = 0; | 
|  | xfs_bmbt_irec_t	imap; | 
|  |  | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL)); | 
|  | ASSERT(offset > isize); | 
|  |  | 
|  | /* | 
|  | * First handle zeroing the block on which isize resides. | 
|  | * We only zero a part of that block so it is handled specially. | 
|  | */ | 
|  | error = xfs_zero_last_block(ip, offset, isize); | 
|  | if (error) { | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL)); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Calculate the range between the new size and the old | 
|  | * where blocks needing to be zeroed may exist.  To get the | 
|  | * block where the last byte in the file currently resides, | 
|  | * we need to subtract one from the size and truncate back | 
|  | * to a block boundary.  We subtract 1 in case the size is | 
|  | * exactly on a block boundary. | 
|  | */ | 
|  | last_fsb = isize ? XFS_B_TO_FSBT(mp, isize - 1) : (xfs_fileoff_t)-1; | 
|  | start_zero_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)isize); | 
|  | end_zero_fsb = XFS_B_TO_FSBT(mp, offset - 1); | 
|  | ASSERT((xfs_sfiloff_t)last_fsb < (xfs_sfiloff_t)start_zero_fsb); | 
|  | if (last_fsb == end_zero_fsb) { | 
|  | /* | 
|  | * The size was only incremented on its last block. | 
|  | * We took care of that above, so just return. | 
|  | */ | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ASSERT(start_zero_fsb <= end_zero_fsb); | 
|  | while (start_zero_fsb <= end_zero_fsb) { | 
|  | nimaps = 1; | 
|  | zero_count_fsb = end_zero_fsb - start_zero_fsb + 1; | 
|  | error = xfs_bmapi_read(ip, start_zero_fsb, zero_count_fsb, | 
|  | &imap, &nimaps, 0); | 
|  | if (error) { | 
|  | ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL|XFS_IOLOCK_EXCL)); | 
|  | return error; | 
|  | } | 
|  | ASSERT(nimaps > 0); | 
|  |  | 
|  | if (imap.br_state == XFS_EXT_UNWRITTEN || | 
|  | imap.br_startblock == HOLESTARTBLOCK) { | 
|  | /* | 
|  | * This loop handles initializing pages that were | 
|  | * partially initialized by the code below this | 
|  | * loop. It basically zeroes the part of the page | 
|  | * that sits on a hole and sets the page as P_HOLE | 
|  | * and calls remapf if it is a mapped file. | 
|  | */ | 
|  | start_zero_fsb = imap.br_startoff + imap.br_blockcount; | 
|  | ASSERT(start_zero_fsb <= (end_zero_fsb + 1)); | 
|  | continue; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * There are blocks we need to zero. | 
|  | * Drop the inode lock while we're doing the I/O. | 
|  | * We'll still have the iolock to protect us. | 
|  | */ | 
|  | xfs_iunlock(ip, XFS_ILOCK_EXCL); | 
|  |  | 
|  | zero_off = XFS_FSB_TO_B(mp, start_zero_fsb); | 
|  | zero_len = XFS_FSB_TO_B(mp, imap.br_blockcount); | 
|  |  | 
|  | if ((zero_off + zero_len) > offset) | 
|  | zero_len = offset - zero_off; | 
|  |  | 
|  | error = xfs_iozero(ip, zero_off, zero_len); | 
|  | if (error) { | 
|  | goto out_lock; | 
|  | } | 
|  |  | 
|  | start_zero_fsb = imap.br_startoff + imap.br_blockcount; | 
|  | ASSERT(start_zero_fsb <= (end_zero_fsb + 1)); | 
|  |  | 
|  | xfs_ilock(ip, XFS_ILOCK_EXCL); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | out_lock: | 
|  | xfs_ilock(ip, XFS_ILOCK_EXCL); | 
|  | ASSERT(error >= 0); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Common pre-write limit and setup checks. | 
|  | * | 
|  | * Called with the iolocked held either shared and exclusive according to | 
|  | * @iolock, and returns with it held.  Might upgrade the iolock to exclusive | 
|  | * if called for a direct write beyond i_size. | 
|  | */ | 
|  | STATIC ssize_t | 
|  | xfs_file_aio_write_checks( | 
|  | struct file		*file, | 
|  | loff_t			*pos, | 
|  | size_t			*count, | 
|  | int			*iolock) | 
|  | { | 
|  | struct inode		*inode = file->f_mapping->host; | 
|  | struct xfs_inode	*ip = XFS_I(inode); | 
|  | int			error = 0; | 
|  |  | 
|  | xfs_rw_ilock(ip, XFS_ILOCK_EXCL); | 
|  | restart: | 
|  | error = generic_write_checks(file, pos, count, S_ISBLK(inode->i_mode)); | 
|  | if (error) { | 
|  | xfs_rw_iunlock(ip, XFS_ILOCK_EXCL); | 
|  | return error; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If the offset is beyond the size of the file, we need to zero any | 
|  | * blocks that fall between the existing EOF and the start of this | 
|  | * write.  If zeroing is needed and we are currently holding the | 
|  | * iolock shared, we need to update it to exclusive which involves | 
|  | * dropping all locks and relocking to maintain correct locking order. | 
|  | * If we do this, restart the function to ensure all checks and values | 
|  | * are still valid. | 
|  | */ | 
|  | if (*pos > i_size_read(inode)) { | 
|  | if (*iolock == XFS_IOLOCK_SHARED) { | 
|  | xfs_rw_iunlock(ip, XFS_ILOCK_EXCL | *iolock); | 
|  | *iolock = XFS_IOLOCK_EXCL; | 
|  | xfs_rw_ilock(ip, XFS_ILOCK_EXCL | *iolock); | 
|  | goto restart; | 
|  | } | 
|  | error = -xfs_zero_eof(ip, *pos, i_size_read(inode)); | 
|  | } | 
|  | xfs_rw_iunlock(ip, XFS_ILOCK_EXCL); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | /* | 
|  | * Updating the timestamps will grab the ilock again from | 
|  | * xfs_fs_dirty_inode, so we have to call it after dropping the | 
|  | * lock above.  Eventually we should look into a way to avoid | 
|  | * the pointless lock roundtrip. | 
|  | */ | 
|  | if (likely(!(file->f_mode & FMODE_NOCMTIME))) | 
|  | file_update_time(file); | 
|  |  | 
|  | /* | 
|  | * If we're writing the file then make sure to clear the setuid and | 
|  | * setgid bits if the process is not being run by root.  This keeps | 
|  | * people from modifying setuid and setgid binaries. | 
|  | */ | 
|  | return file_remove_suid(file); | 
|  |  | 
|  | } | 
|  |  | 
|  | /* | 
|  | * xfs_file_dio_aio_write - handle direct IO writes | 
|  | * | 
|  | * Lock the inode appropriately to prepare for and issue a direct IO write. | 
|  | * By separating it from the buffered write path we remove all the tricky to | 
|  | * follow locking changes and looping. | 
|  | * | 
|  | * If there are cached pages or we're extending the file, we need IOLOCK_EXCL | 
|  | * until we're sure the bytes at the new EOF have been zeroed and/or the cached | 
|  | * pages are flushed out. | 
|  | * | 
|  | * In most cases the direct IO writes will be done holding IOLOCK_SHARED | 
|  | * allowing them to be done in parallel with reads and other direct IO writes. | 
|  | * However, if the IO is not aligned to filesystem blocks, the direct IO layer | 
|  | * needs to do sub-block zeroing and that requires serialisation against other | 
|  | * direct IOs to the same block. In this case we need to serialise the | 
|  | * submission of the unaligned IOs so that we don't get racing block zeroing in | 
|  | * the dio layer.  To avoid the problem with aio, we also need to wait for | 
|  | * outstanding IOs to complete so that unwritten extent conversion is completed | 
|  | * before we try to map the overlapping block. This is currently implemented by | 
|  | * hitting it with a big hammer (i.e. inode_dio_wait()). | 
|  | * | 
|  | * Returns with locks held indicated by @iolock and errors indicated by | 
|  | * negative return values. | 
|  | */ | 
|  | STATIC ssize_t | 
|  | xfs_file_dio_aio_write( | 
|  | struct kiocb		*iocb, | 
|  | const struct iovec	*iovp, | 
|  | unsigned long		nr_segs, | 
|  | loff_t			pos, | 
|  | size_t			ocount) | 
|  | { | 
|  | struct file		*file = iocb->ki_filp; | 
|  | struct address_space	*mapping = file->f_mapping; | 
|  | struct inode		*inode = mapping->host; | 
|  | struct xfs_inode	*ip = XFS_I(inode); | 
|  | struct xfs_mount	*mp = ip->i_mount; | 
|  | ssize_t			ret = 0; | 
|  | size_t			count = ocount; | 
|  | int			unaligned_io = 0; | 
|  | int			iolock; | 
|  | struct xfs_buftarg	*target = XFS_IS_REALTIME_INODE(ip) ? | 
|  | mp->m_rtdev_targp : mp->m_ddev_targp; | 
|  |  | 
|  | if ((pos & target->bt_smask) || (count & target->bt_smask)) | 
|  | return -XFS_ERROR(EINVAL); | 
|  |  | 
|  | if ((pos & mp->m_blockmask) || ((pos + count) & mp->m_blockmask)) | 
|  | unaligned_io = 1; | 
|  |  | 
|  | /* | 
|  | * We don't need to take an exclusive lock unless there page cache needs | 
|  | * to be invalidated or unaligned IO is being executed. We don't need to | 
|  | * consider the EOF extension case here because | 
|  | * xfs_file_aio_write_checks() will relock the inode as necessary for | 
|  | * EOF zeroing cases and fill out the new inode size as appropriate. | 
|  | */ | 
|  | if (unaligned_io || mapping->nrpages) | 
|  | iolock = XFS_IOLOCK_EXCL; | 
|  | else | 
|  | iolock = XFS_IOLOCK_SHARED; | 
|  | xfs_rw_ilock(ip, iolock); | 
|  |  | 
|  | /* | 
|  | * Recheck if there are cached pages that need invalidate after we got | 
|  | * the iolock to protect against other threads adding new pages while | 
|  | * we were waiting for the iolock. | 
|  | */ | 
|  | if (mapping->nrpages && iolock == XFS_IOLOCK_SHARED) { | 
|  | xfs_rw_iunlock(ip, iolock); | 
|  | iolock = XFS_IOLOCK_EXCL; | 
|  | xfs_rw_ilock(ip, iolock); | 
|  | } | 
|  |  | 
|  | ret = xfs_file_aio_write_checks(file, &pos, &count, &iolock); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | if (mapping->nrpages) { | 
|  | ret = -xfs_flushinval_pages(ip, (pos & PAGE_CACHE_MASK), -1, | 
|  | FI_REMAPF_LOCKED); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * If we are doing unaligned IO, wait for all other IO to drain, | 
|  | * otherwise demote the lock if we had to flush cached pages | 
|  | */ | 
|  | if (unaligned_io) | 
|  | inode_dio_wait(inode); | 
|  | else if (iolock == XFS_IOLOCK_EXCL) { | 
|  | xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL); | 
|  | iolock = XFS_IOLOCK_SHARED; | 
|  | } | 
|  |  | 
|  | trace_xfs_file_direct_write(ip, count, iocb->ki_pos, 0); | 
|  | ret = generic_file_direct_write(iocb, iovp, | 
|  | &nr_segs, pos, &iocb->ki_pos, count, ocount); | 
|  |  | 
|  | out: | 
|  | xfs_rw_iunlock(ip, iolock); | 
|  |  | 
|  | /* No fallback to buffered IO on errors for XFS. */ | 
|  | ASSERT(ret < 0 || ret == count); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | STATIC ssize_t | 
|  | xfs_file_buffered_aio_write( | 
|  | struct kiocb		*iocb, | 
|  | const struct iovec	*iovp, | 
|  | unsigned long		nr_segs, | 
|  | loff_t			pos, | 
|  | size_t			ocount) | 
|  | { | 
|  | struct file		*file = iocb->ki_filp; | 
|  | struct address_space	*mapping = file->f_mapping; | 
|  | struct inode		*inode = mapping->host; | 
|  | struct xfs_inode	*ip = XFS_I(inode); | 
|  | ssize_t			ret; | 
|  | int			enospc = 0; | 
|  | int			iolock = XFS_IOLOCK_EXCL; | 
|  | size_t			count = ocount; | 
|  |  | 
|  | xfs_rw_ilock(ip, iolock); | 
|  |  | 
|  | ret = xfs_file_aio_write_checks(file, &pos, &count, &iolock); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | /* We can write back this queue in page reclaim */ | 
|  | current->backing_dev_info = mapping->backing_dev_info; | 
|  |  | 
|  | write_retry: | 
|  | trace_xfs_file_buffered_write(ip, count, iocb->ki_pos, 0); | 
|  | ret = generic_file_buffered_write(iocb, iovp, nr_segs, | 
|  | pos, &iocb->ki_pos, count, ret); | 
|  | /* | 
|  | * if we just got an ENOSPC, flush the inode now we aren't holding any | 
|  | * page locks and retry *once* | 
|  | */ | 
|  | if (ret == -ENOSPC && !enospc) { | 
|  | enospc = 1; | 
|  | ret = -xfs_flush_pages(ip, 0, -1, 0, FI_NONE); | 
|  | if (!ret) | 
|  | goto write_retry; | 
|  | } | 
|  |  | 
|  | current->backing_dev_info = NULL; | 
|  | out: | 
|  | xfs_rw_iunlock(ip, iolock); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | STATIC ssize_t | 
|  | xfs_file_aio_write( | 
|  | struct kiocb		*iocb, | 
|  | const struct iovec	*iovp, | 
|  | unsigned long		nr_segs, | 
|  | loff_t			pos) | 
|  | { | 
|  | struct file		*file = iocb->ki_filp; | 
|  | struct address_space	*mapping = file->f_mapping; | 
|  | struct inode		*inode = mapping->host; | 
|  | struct xfs_inode	*ip = XFS_I(inode); | 
|  | ssize_t			ret; | 
|  | size_t			ocount = 0; | 
|  |  | 
|  | XFS_STATS_INC(xs_write_calls); | 
|  |  | 
|  | BUG_ON(iocb->ki_pos != pos); | 
|  |  | 
|  | ret = generic_segment_checks(iovp, &nr_segs, &ocount, VERIFY_READ); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (ocount == 0) | 
|  | return 0; | 
|  |  | 
|  | xfs_wait_for_freeze(ip->i_mount, SB_FREEZE_WRITE); | 
|  |  | 
|  | if (XFS_FORCED_SHUTDOWN(ip->i_mount)) | 
|  | return -EIO; | 
|  |  | 
|  | if (unlikely(file->f_flags & O_DIRECT)) | 
|  | ret = xfs_file_dio_aio_write(iocb, iovp, nr_segs, pos, ocount); | 
|  | else | 
|  | ret = xfs_file_buffered_aio_write(iocb, iovp, nr_segs, pos, | 
|  | ocount); | 
|  |  | 
|  | if (ret > 0) { | 
|  | ssize_t err; | 
|  |  | 
|  | XFS_STATS_ADD(xs_write_bytes, ret); | 
|  |  | 
|  | /* Handle various SYNC-type writes */ | 
|  | err = generic_write_sync(file, pos, ret); | 
|  | if (err < 0) | 
|  | ret = err; | 
|  | } | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | STATIC long | 
|  | xfs_file_fallocate( | 
|  | struct file	*file, | 
|  | int		mode, | 
|  | loff_t		offset, | 
|  | loff_t		len) | 
|  | { | 
|  | struct inode	*inode = file->f_path.dentry->d_inode; | 
|  | long		error; | 
|  | loff_t		new_size = 0; | 
|  | xfs_flock64_t	bf; | 
|  | xfs_inode_t	*ip = XFS_I(inode); | 
|  | int		cmd = XFS_IOC_RESVSP; | 
|  | int		attr_flags = XFS_ATTR_NOLOCK; | 
|  |  | 
|  | if (mode & ~(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE)) | 
|  | return -EOPNOTSUPP; | 
|  |  | 
|  | bf.l_whence = 0; | 
|  | bf.l_start = offset; | 
|  | bf.l_len = len; | 
|  |  | 
|  | xfs_ilock(ip, XFS_IOLOCK_EXCL); | 
|  |  | 
|  | if (mode & FALLOC_FL_PUNCH_HOLE) | 
|  | cmd = XFS_IOC_UNRESVSP; | 
|  |  | 
|  | /* check the new inode size is valid before allocating */ | 
|  | if (!(mode & FALLOC_FL_KEEP_SIZE) && | 
|  | offset + len > i_size_read(inode)) { | 
|  | new_size = offset + len; | 
|  | error = inode_newsize_ok(inode, new_size); | 
|  | if (error) | 
|  | goto out_unlock; | 
|  | } | 
|  |  | 
|  | if (file->f_flags & O_DSYNC) | 
|  | attr_flags |= XFS_ATTR_SYNC; | 
|  |  | 
|  | error = -xfs_change_file_space(ip, cmd, &bf, 0, attr_flags); | 
|  | if (error) | 
|  | goto out_unlock; | 
|  |  | 
|  | /* Change file size if needed */ | 
|  | if (new_size) { | 
|  | struct iattr iattr; | 
|  |  | 
|  | iattr.ia_valid = ATTR_SIZE; | 
|  | iattr.ia_size = new_size; | 
|  | error = -xfs_setattr_size(ip, &iattr, XFS_ATTR_NOLOCK); | 
|  | } | 
|  |  | 
|  | out_unlock: | 
|  | xfs_iunlock(ip, XFS_IOLOCK_EXCL); | 
|  | return error; | 
|  | } | 
|  |  | 
|  |  | 
|  | STATIC int | 
|  | xfs_file_open( | 
|  | struct inode	*inode, | 
|  | struct file	*file) | 
|  | { | 
|  | if (!(file->f_flags & O_LARGEFILE) && i_size_read(inode) > MAX_NON_LFS) | 
|  | return -EFBIG; | 
|  | if (XFS_FORCED_SHUTDOWN(XFS_M(inode->i_sb))) | 
|  | return -EIO; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | STATIC int | 
|  | xfs_dir_open( | 
|  | struct inode	*inode, | 
|  | struct file	*file) | 
|  | { | 
|  | struct xfs_inode *ip = XFS_I(inode); | 
|  | int		mode; | 
|  | int		error; | 
|  |  | 
|  | error = xfs_file_open(inode, file); | 
|  | if (error) | 
|  | return error; | 
|  |  | 
|  | /* | 
|  | * If there are any blocks, read-ahead block 0 as we're almost | 
|  | * certain to have the next operation be a read there. | 
|  | */ | 
|  | mode = xfs_ilock_map_shared(ip); | 
|  | if (ip->i_d.di_nextents > 0) | 
|  | xfs_da_reada_buf(NULL, ip, 0, XFS_DATA_FORK); | 
|  | xfs_iunlock(ip, mode); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | STATIC int | 
|  | xfs_file_release( | 
|  | struct inode	*inode, | 
|  | struct file	*filp) | 
|  | { | 
|  | return -xfs_release(XFS_I(inode)); | 
|  | } | 
|  |  | 
|  | STATIC int | 
|  | xfs_file_readdir( | 
|  | struct file	*filp, | 
|  | void		*dirent, | 
|  | filldir_t	filldir) | 
|  | { | 
|  | struct inode	*inode = filp->f_path.dentry->d_inode; | 
|  | xfs_inode_t	*ip = XFS_I(inode); | 
|  | int		error; | 
|  | size_t		bufsize; | 
|  |  | 
|  | /* | 
|  | * The Linux API doesn't pass down the total size of the buffer | 
|  | * we read into down to the filesystem.  With the filldir concept | 
|  | * it's not needed for correct information, but the XFS dir2 leaf | 
|  | * code wants an estimate of the buffer size to calculate it's | 
|  | * readahead window and size the buffers used for mapping to | 
|  | * physical blocks. | 
|  | * | 
|  | * Try to give it an estimate that's good enough, maybe at some | 
|  | * point we can change the ->readdir prototype to include the | 
|  | * buffer size.  For now we use the current glibc buffer size. | 
|  | */ | 
|  | bufsize = (size_t)min_t(loff_t, 32768, ip->i_d.di_size); | 
|  |  | 
|  | error = xfs_readdir(ip, dirent, bufsize, | 
|  | (xfs_off_t *)&filp->f_pos, filldir); | 
|  | if (error) | 
|  | return -error; | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | STATIC int | 
|  | xfs_file_mmap( | 
|  | struct file	*filp, | 
|  | struct vm_area_struct *vma) | 
|  | { | 
|  | vma->vm_ops = &xfs_file_vm_ops; | 
|  | vma->vm_flags |= VM_CAN_NONLINEAR; | 
|  |  | 
|  | file_accessed(filp); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * mmap()d file has taken write protection fault and is being made | 
|  | * writable. We can set the page state up correctly for a writable | 
|  | * page, which means we can do correct delalloc accounting (ENOSPC | 
|  | * checking!) and unwritten extent mapping. | 
|  | */ | 
|  | STATIC int | 
|  | xfs_vm_page_mkwrite( | 
|  | struct vm_area_struct	*vma, | 
|  | struct vm_fault		*vmf) | 
|  | { | 
|  | return block_page_mkwrite(vma, vmf, xfs_get_blocks); | 
|  | } | 
|  |  | 
|  | const struct file_operations xfs_file_operations = { | 
|  | .llseek		= generic_file_llseek, | 
|  | .read		= do_sync_read, | 
|  | .write		= do_sync_write, | 
|  | .aio_read	= xfs_file_aio_read, | 
|  | .aio_write	= xfs_file_aio_write, | 
|  | .splice_read	= xfs_file_splice_read, | 
|  | .splice_write	= xfs_file_splice_write, | 
|  | .unlocked_ioctl	= xfs_file_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl	= xfs_file_compat_ioctl, | 
|  | #endif | 
|  | .mmap		= xfs_file_mmap, | 
|  | .open		= xfs_file_open, | 
|  | .release	= xfs_file_release, | 
|  | .fsync		= xfs_file_fsync, | 
|  | .fallocate	= xfs_file_fallocate, | 
|  | }; | 
|  |  | 
|  | const struct file_operations xfs_dir_file_operations = { | 
|  | .open		= xfs_dir_open, | 
|  | .read		= generic_read_dir, | 
|  | .readdir	= xfs_file_readdir, | 
|  | .llseek		= generic_file_llseek, | 
|  | .unlocked_ioctl	= xfs_file_ioctl, | 
|  | #ifdef CONFIG_COMPAT | 
|  | .compat_ioctl	= xfs_file_compat_ioctl, | 
|  | #endif | 
|  | .fsync		= xfs_dir_fsync, | 
|  | }; | 
|  |  | 
|  | static const struct vm_operations_struct xfs_file_vm_ops = { | 
|  | .fault		= filemap_fault, | 
|  | .page_mkwrite	= xfs_vm_page_mkwrite, | 
|  | }; |