| // SPDX-License-Identifier: GPL-2.0+ OR MIT |
| /* |
| * Device Tree Source for Sierra Wireless WP8548 Module |
| * |
| * Copyright (C) 2016 BayLibre, SAS. |
| * Author : Neil Armstrong <narmstrong@baylibre.com> |
| */ |
| |
| #include "qcom-mdm9615.dtsi" |
| #include "pm8018.dtsi" |
| |
| / { |
| model = "Sierra Wireless WP8548 Module"; |
| compatible = "swir,wp8548", "qcom,mdm9615"; |
| |
| memory@48000000 { |
| device_type = "memory"; |
| reg = <0x48000000 0x7F00000>; |
| }; |
| }; |
| |
| &msmgpio { |
| pinctrl-0 = <&reset_out_pins>; |
| pinctrl-names = "default"; |
| |
| gsbi3_pins: gsbi3-state { |
| gsbi3-pins { |
| pins = "gpio8", "gpio9", "gpio10", "gpio11"; |
| function = "gsbi3"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| }; |
| |
| gsbi4_pins: gsbi4-state { |
| gsbi4-pins { |
| pins = "gpio12", "gpio13", "gpio14", "gpio15"; |
| function = "gsbi4"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| }; |
| |
| gsbi5_i2c_pins: gsbi5-i2c-state { |
| sda-pins { |
| pins = "gpio16"; |
| function = "gsbi5_i2c"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| |
| scl-pins { |
| pins = "gpio17"; |
| function = "gsbi5_i2c"; |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| }; |
| |
| gsbi5_uart_pins: gsbi5-uart-state { |
| gsbi5-uart-pins { |
| pins = "gpio18", "gpio19"; |
| function = "gsbi5_uart"; |
| drive-strength = <8>; |
| bias-disable; |
| }; |
| }; |
| |
| reset_out_pins: reset-out-state { |
| reset-out-pins { |
| pins = "gpio66"; |
| function = "gpio"; |
| drive-strength = <2>; |
| bias-pull-up; |
| output-high; |
| }; |
| }; |
| }; |
| |
| &pm8018 { |
| interrupts-extended = <&intc GIC_PPI 226 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| &pm8018_gpio { |
| usb_vbus_5v_pins: usb-vbus-5v-state { |
| pins = "gpio4"; |
| function = "normal"; |
| output-high; |
| bias-disable; |
| qcom,drive-strength = <1>; |
| power-source = <2>; |
| }; |
| }; |
| |
| &gsbi3 { |
| status = "okay"; |
| qcom,mode = <GSBI_PROT_SPI>; |
| }; |
| |
| &gsbi3_spi { |
| status = "okay"; |
| pinctrl-0 = <&gsbi3_pins>; |
| pinctrl-names = "default"; |
| assigned-clocks = <&gcc GSBI3_QUP_CLK>; |
| assigned-clock-rates = <24000000>; |
| }; |
| |
| &gsbi4 { |
| status = "okay"; |
| qcom,mode = <GSBI_PROT_UART_W_FC>; |
| }; |
| |
| &gsbi4_serial { |
| status = "okay"; |
| pinctrl-0 = <&gsbi4_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &gsbi5 { |
| status = "okay"; |
| qcom,mode = <GSBI_PROT_I2C_UART>; |
| }; |
| |
| &gsbi5_i2c { |
| status = "okay"; |
| clock-frequency = <200000>; |
| pinctrl-0 = <&gsbi5_i2c_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &gsbi5_serial { |
| status = "okay"; |
| pinctrl-0 = <&gsbi5_uart_pins>; |
| pinctrl-names = "default"; |
| }; |
| |
| &rpm { |
| regulators { |
| compatible = "qcom,rpm-pm8018-regulators"; |
| |
| vin_lvs1-supply = <&pm8018_s3>; |
| |
| vdd_l7-supply = <&pm8018_s4>; |
| vdd_l8-supply = <&pm8018_s3>; |
| vdd_l9_l10_l11_l12-supply = <&pm8018_s5>; |
| |
| /* Buck SMPS */ |
| pm8018_s1: s1 { |
| regulator-min-microvolt = <500000>; |
| regulator-max-microvolt = <1150000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_s2: s2 { |
| regulator-min-microvolt = <1225000>; |
| regulator-max-microvolt = <1300000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_s3: s3 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_s4: s4 { |
| regulator-min-microvolt = <2100000>; |
| regulator-max-microvolt = <2200000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_s5: s5 { |
| regulator-always-on; |
| regulator-min-microvolt = <1350000>; |
| regulator-max-microvolt = <1350000>; |
| qcom,switch-mode-frequency = <1600000>; |
| bias-pull-down; |
| }; |
| |
| /* PMOS LDO */ |
| pm8018_l2: l2 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l3: l3 { |
| regulator-always-on; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l4: l4 { |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l5: l5 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l6: l6 { |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <2850000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l7: l7 { |
| regulator-min-microvolt = <1850000>; |
| regulator-max-microvolt = <1900000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l8: l8 { |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l9: l9 { |
| regulator-min-microvolt = <750000>; |
| regulator-max-microvolt = <1150000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l10: l10 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l11: l11 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l12: l12 { |
| regulator-min-microvolt = <1050000>; |
| regulator-max-microvolt = <1050000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l13: l13 { |
| regulator-min-microvolt = <1850000>; |
| regulator-max-microvolt = <2950000>; |
| bias-pull-down; |
| }; |
| |
| pm8018_l14: l14 { |
| regulator-min-microvolt = <2850000>; |
| regulator-max-microvolt = <2850000>; |
| bias-pull-down; |
| }; |
| |
| /* Low Voltage Switch */ |
| pm8018_lvs1: lvs1 { |
| bias-pull-down; |
| }; |
| }; |
| }; |
| |
| &sdcc1 { |
| status = "okay"; |
| }; |