blob: 389f5f83bef90a67a1506a785087e1851c809309 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/dts-v1/;
#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
/ {
model = "Romulus BMC";
compatible = "ibm,romulus-bmc", "aspeed,ast2500";
chosen {
stdout-path = &uart5;
bootargs = "console=ttyS4,115200 earlyprintk";
};
memory@80000000 {
reg = <0x80000000 0x20000000>;
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
vga_memory: framebuffer@bf000000 {
no-map;
reg = <0xbf000000 0x01000000>; /* 16M */
};
flash_memory: region@98000000 {
no-map;
reg = <0x98000000 0x04000000>; /* 64M */
};
};
leds {
compatible = "gpio-leds";
fault {
gpios = <&gpio ASPEED_GPIO(N, 2) GPIO_ACTIVE_LOW>;
};
identify {
gpios = <&gpio ASPEED_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
};
power {
gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_LOW>;
};
};
fsi: gpio-fsi {
compatible = "fsi-master-gpio", "fsi-master";
#address-cells = <2>;
#size-cells = <0>;
clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
};
gpio-keys {
compatible = "gpio-keys";
checkstop {
label = "checkstop";
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(J, 2)>;
};
id-button {
label = "id-button";
gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
linux,code = <ASPEED_GPIO(Q, 7)>;
};
};
};
&fmc {
status = "okay";
flash@0 {
status = "okay";
m25p,fast-read;
label = "bmc";
#include "openbmc-flash-layout.dtsi"
};
};
&spi1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1_default>;
flash@0 {
status = "okay";
m25p,fast-read;
label = "pnor";
};
};
&lpc_ctrl {
status = "okay";
memory-region = <&flash_memory>;
flash = <&spi1>;
};
&uart1 {
/* Rear RS-232 connector */
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_txd1_default
&pinctrl_rxd1_default
&pinctrl_nrts1_default
&pinctrl_ndtr1_default
&pinctrl_ndsr1_default
&pinctrl_ncts1_default
&pinctrl_ndcd1_default
&pinctrl_nri1_default>;
};
&uart5 {
status = "okay";
};
&mac0 {
status = "okay";
use-ncsi;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_rmii1_default>;
};
&i2c1 {
status = "okay";
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
/* PCIe slot 1 (x8) */
status = "okay";
};
&i2c7 {
/* PCIe slot 2 (x16) */
status = "okay";
};
&i2c8 {
/* PCIe slot 3 (x16) */
status = "okay";
};
&i2c9 {
/* PCIe slot 4 (x16) */
status = "okay";
};
&i2c10 {
/* PCIe slot 5 (x8) */
status = "okay";
};
&i2c11 {
status = "okay";
rtc@32 {
compatible = "epson,rx8900";
reg = <0x32>;
};
};
&i2c12 {
status = "okay";
w83773g@4c {
compatible = "nuvoton,w83773g";
reg = <0x4c>;
};
};
&gpio {
nic_func_mode0 {
gpio-hog;
gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "nic_func_mode0";
};
nic_func_mode1 {
gpio-hog;
gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "nic_func_mode1";
};
seq_cont {
gpio-hog;
gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
output-low;
line-name = "seq_cont";
};
};
&vuart {
status = "okay";
};
&gfx {
status = "okay";
};
&pinctrl {
aspeed,external-nodes = <&gfx &lhc>;
};
&pwm_tacho {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
fan@0 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x08>;
};
fan@1 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x09>;
};
fan@2 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x0a>;
};
fan@3 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x0b>;
};
fan@4 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x0c>;
};
fan@5 {
reg = <0x00>;
aspeed,fan-tach-ch = /bits/ 8 <0x0d>;
};
fan@6 {
reg = <0x01>;
aspeed,fan-tach-ch = /bits/ 8 <0x0e>;
};
};
&ibt {
status = "okay";
};