|  | /* | 
|  | * HID driver for Nintendo Wiimote extension devices | 
|  | * Copyright (c) 2011 David Herrmann | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This program is free software; you can redistribute it and/or modify it | 
|  | * under the terms of the GNU General Public License as published by the Free | 
|  | * Software Foundation; either version 2 of the License, or (at your option) | 
|  | * any later version. | 
|  | */ | 
|  |  | 
|  | #include <linux/atomic.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/spinlock.h> | 
|  | #include <linux/workqueue.h> | 
|  | #include "hid-wiimote.h" | 
|  |  | 
|  | struct wiimote_ext { | 
|  | struct wiimote_data *wdata; | 
|  | struct work_struct worker; | 
|  | struct input_dev *input; | 
|  | struct input_dev *mp_input; | 
|  |  | 
|  | atomic_t opened; | 
|  | atomic_t mp_opened; | 
|  | bool plugged; | 
|  | bool mp_plugged; | 
|  | bool motionp; | 
|  | __u8 ext_type; | 
|  | __u16 calib[4][3]; | 
|  | }; | 
|  |  | 
|  | enum wiiext_type { | 
|  | WIIEXT_NONE,		/* placeholder */ | 
|  | WIIEXT_CLASSIC,		/* Nintendo classic controller */ | 
|  | WIIEXT_NUNCHUCK,	/* Nintendo nunchuck controller */ | 
|  | WIIEXT_BALANCE_BOARD,	/* Nintendo balance board controller */ | 
|  | }; | 
|  |  | 
|  | enum wiiext_keys { | 
|  | WIIEXT_KEY_C, | 
|  | WIIEXT_KEY_Z, | 
|  | WIIEXT_KEY_A, | 
|  | WIIEXT_KEY_B, | 
|  | WIIEXT_KEY_X, | 
|  | WIIEXT_KEY_Y, | 
|  | WIIEXT_KEY_ZL, | 
|  | WIIEXT_KEY_ZR, | 
|  | WIIEXT_KEY_PLUS, | 
|  | WIIEXT_KEY_MINUS, | 
|  | WIIEXT_KEY_HOME, | 
|  | WIIEXT_KEY_LEFT, | 
|  | WIIEXT_KEY_RIGHT, | 
|  | WIIEXT_KEY_UP, | 
|  | WIIEXT_KEY_DOWN, | 
|  | WIIEXT_KEY_LT, | 
|  | WIIEXT_KEY_RT, | 
|  | WIIEXT_KEY_COUNT | 
|  | }; | 
|  |  | 
|  | static __u16 wiiext_keymap[] = { | 
|  | BTN_C,		/* WIIEXT_KEY_C */ | 
|  | BTN_Z,		/* WIIEXT_KEY_Z */ | 
|  | BTN_A,		/* WIIEXT_KEY_A */ | 
|  | BTN_B,		/* WIIEXT_KEY_B */ | 
|  | BTN_X,		/* WIIEXT_KEY_X */ | 
|  | BTN_Y,		/* WIIEXT_KEY_Y */ | 
|  | BTN_TL2,	/* WIIEXT_KEY_ZL */ | 
|  | BTN_TR2,	/* WIIEXT_KEY_ZR */ | 
|  | KEY_NEXT,	/* WIIEXT_KEY_PLUS */ | 
|  | KEY_PREVIOUS,	/* WIIEXT_KEY_MINUS */ | 
|  | BTN_MODE,	/* WIIEXT_KEY_HOME */ | 
|  | KEY_LEFT,	/* WIIEXT_KEY_LEFT */ | 
|  | KEY_RIGHT,	/* WIIEXT_KEY_RIGHT */ | 
|  | KEY_UP,		/* WIIEXT_KEY_UP */ | 
|  | KEY_DOWN,	/* WIIEXT_KEY_DOWN */ | 
|  | BTN_TL,		/* WIIEXT_KEY_LT */ | 
|  | BTN_TR,		/* WIIEXT_KEY_RT */ | 
|  | }; | 
|  |  | 
|  | /* disable all extensions */ | 
|  | static void ext_disable(struct wiimote_ext *ext) | 
|  | { | 
|  | unsigned long flags; | 
|  | __u8 wmem = 0x55; | 
|  |  | 
|  | if (!wiimote_cmd_acquire(ext->wdata)) { | 
|  | wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem)); | 
|  | wiimote_cmd_release(ext->wdata); | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&ext->wdata->state.lock, flags); | 
|  | ext->motionp = false; | 
|  | ext->ext_type = WIIEXT_NONE; | 
|  | wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&ext->wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static bool motionp_read(struct wiimote_ext *ext) | 
|  | { | 
|  | __u8 rmem[2], wmem; | 
|  | ssize_t ret; | 
|  | bool avail = false; | 
|  |  | 
|  | if (!atomic_read(&ext->mp_opened)) | 
|  | return false; | 
|  |  | 
|  | if (wiimote_cmd_acquire(ext->wdata)) | 
|  | return false; | 
|  |  | 
|  | /* initialize motion plus */ | 
|  | wmem = 0x55; | 
|  | ret = wiimote_cmd_write(ext->wdata, 0xa600f0, &wmem, sizeof(wmem)); | 
|  | if (ret) | 
|  | goto error; | 
|  |  | 
|  | /* read motion plus ID */ | 
|  | ret = wiimote_cmd_read(ext->wdata, 0xa600fe, rmem, 2); | 
|  | if (ret == 2 || rmem[1] == 0x5) | 
|  | avail = true; | 
|  |  | 
|  | error: | 
|  | wiimote_cmd_release(ext->wdata); | 
|  | return avail; | 
|  | } | 
|  |  | 
|  | static __u8 ext_read(struct wiimote_ext *ext) | 
|  | { | 
|  | ssize_t ret; | 
|  | __u8 buf[24], i, j, offs = 0; | 
|  | __u8 rmem[2], wmem; | 
|  | __u8 type = WIIEXT_NONE; | 
|  |  | 
|  | if (!ext->plugged || !atomic_read(&ext->opened)) | 
|  | return WIIEXT_NONE; | 
|  |  | 
|  | if (wiimote_cmd_acquire(ext->wdata)) | 
|  | return WIIEXT_NONE; | 
|  |  | 
|  | /* initialize extension */ | 
|  | wmem = 0x55; | 
|  | ret = wiimote_cmd_write(ext->wdata, 0xa400f0, &wmem, sizeof(wmem)); | 
|  | if (!ret) { | 
|  | /* disable encryption */ | 
|  | wmem = 0x0; | 
|  | wiimote_cmd_write(ext->wdata, 0xa400fb, &wmem, sizeof(wmem)); | 
|  | } | 
|  |  | 
|  | /* read extension ID */ | 
|  | ret = wiimote_cmd_read(ext->wdata, 0xa400fe, rmem, 2); | 
|  | if (ret == 2) { | 
|  | if (rmem[0] == 0 && rmem[1] == 0) | 
|  | type = WIIEXT_NUNCHUCK; | 
|  | else if (rmem[0] == 0x01 && rmem[1] == 0x01) | 
|  | type = WIIEXT_CLASSIC; | 
|  | else if (rmem[0] == 0x04 && rmem[1] == 0x02) | 
|  | type = WIIEXT_BALANCE_BOARD; | 
|  | } | 
|  |  | 
|  | /* get balance board calibration data */ | 
|  | if (type == WIIEXT_BALANCE_BOARD) { | 
|  | ret = wiimote_cmd_read(ext->wdata, 0xa40024, buf, 12); | 
|  | ret += wiimote_cmd_read(ext->wdata, 0xa40024 + 12, | 
|  | buf + 12, 12); | 
|  |  | 
|  | if (ret != 24) { | 
|  | type = WIIEXT_NONE; | 
|  | } else { | 
|  | for (i = 0; i < 3; i++) { | 
|  | for (j = 0; j < 4; j++) { | 
|  | ext->calib[j][i] = buf[offs]; | 
|  | ext->calib[j][i] <<= 8; | 
|  | ext->calib[j][i] |= buf[offs + 1]; | 
|  | offs += 2; | 
|  | } | 
|  | } | 
|  | } | 
|  | } | 
|  |  | 
|  | wiimote_cmd_release(ext->wdata); | 
|  |  | 
|  | return type; | 
|  | } | 
|  |  | 
|  | static void ext_enable(struct wiimote_ext *ext, bool motionp, __u8 ext_type) | 
|  | { | 
|  | unsigned long flags; | 
|  | __u8 wmem; | 
|  | int ret; | 
|  |  | 
|  | if (motionp) { | 
|  | if (wiimote_cmd_acquire(ext->wdata)) | 
|  | return; | 
|  |  | 
|  | if (ext_type == WIIEXT_CLASSIC) | 
|  | wmem = 0x07; | 
|  | else if (ext_type == WIIEXT_NUNCHUCK) | 
|  | wmem = 0x05; | 
|  | else | 
|  | wmem = 0x04; | 
|  |  | 
|  | ret = wiimote_cmd_write(ext->wdata, 0xa600fe, &wmem, sizeof(wmem)); | 
|  | wiimote_cmd_release(ext->wdata); | 
|  | if (ret) | 
|  | return; | 
|  | } | 
|  |  | 
|  | spin_lock_irqsave(&ext->wdata->state.lock, flags); | 
|  | ext->motionp = motionp; | 
|  | ext->ext_type = ext_type; | 
|  | wiiproto_req_drm(ext->wdata, WIIPROTO_REQ_NULL); | 
|  | spin_unlock_irqrestore(&ext->wdata->state.lock, flags); | 
|  | } | 
|  |  | 
|  | static void wiiext_worker(struct work_struct *work) | 
|  | { | 
|  | struct wiimote_ext *ext = container_of(work, struct wiimote_ext, | 
|  | worker); | 
|  | bool motionp; | 
|  | __u8 ext_type; | 
|  |  | 
|  | ext_disable(ext); | 
|  | motionp = motionp_read(ext); | 
|  | ext_type = ext_read(ext); | 
|  | ext_enable(ext, motionp, ext_type); | 
|  | } | 
|  |  | 
|  | /* schedule work only once, otherwise mark for reschedule */ | 
|  | static void wiiext_schedule(struct wiimote_ext *ext) | 
|  | { | 
|  | schedule_work(&ext->worker); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Reacts on extension port events | 
|  | * Whenever the driver gets an event from the wiimote that an extension has been | 
|  | * plugged or unplugged, this funtion shall be called. It checks what extensions | 
|  | * are connected and initializes and activates them. | 
|  | * This can be called in atomic context. The initialization is done in a | 
|  | * separate worker thread. The state.lock spinlock must be held by the caller. | 
|  | */ | 
|  | void wiiext_event(struct wiimote_data *wdata, bool plugged) | 
|  | { | 
|  | if (!wdata->ext) | 
|  | return; | 
|  |  | 
|  | if (wdata->ext->plugged == plugged) | 
|  | return; | 
|  |  | 
|  | wdata->ext->plugged = plugged; | 
|  |  | 
|  | if (!plugged) | 
|  | wdata->ext->mp_plugged = false; | 
|  |  | 
|  | /* | 
|  | * We need to call wiiext_schedule(wdata->ext) here, however, the | 
|  | * extension initialization logic is not fully understood and so | 
|  | * automatic initialization is not supported, yet. | 
|  | */ | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Returns true if the current DRM mode should contain extension data and false | 
|  | * if there is no interest in extension data. | 
|  | * All supported extensions send 6 byte extension data so any DRM that contains | 
|  | * extension bytes is fine. | 
|  | * The caller must hold the state.lock spinlock. | 
|  | */ | 
|  | bool wiiext_active(struct wiimote_data *wdata) | 
|  | { | 
|  | if (!wdata->ext) | 
|  | return false; | 
|  |  | 
|  | return wdata->ext->motionp || wdata->ext->ext_type; | 
|  | } | 
|  |  | 
|  | static void handler_motionp(struct wiimote_ext *ext, const __u8 *payload) | 
|  | { | 
|  | __s32 x, y, z; | 
|  | bool plugged; | 
|  |  | 
|  | /*        |   8    7    6    5    4    3 |  2  |  1  | | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | *    1   |               Yaw Speed <7:0>            | | 
|  | *    2   |              Roll Speed <7:0>            | | 
|  | *    3   |             Pitch Speed <7:0>            | | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | *    4   |       Yaw Speed <13:8>       | Yaw |Pitch| | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | *    5   |      Roll Speed <13:8>       |Roll | Ext | | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | *    6   |     Pitch Speed <13:8>       |  1  |  0  | | 
|  | *   -----+------------------------------+-----+-----+ | 
|  | * The single bits Yaw, Roll, Pitch in the lower right corner specify | 
|  | * whether the wiimote is rotating fast (0) or slow (1). Speed for slow | 
|  | * roation is 440 deg/s and for fast rotation 2000 deg/s. To get a | 
|  | * linear scale we multiply by 2000/440 = ~4.5454 which is 18 for fast | 
|  | * and 9 for slow. | 
|  | * If the wiimote is not rotating the sensor reports 2^13 = 8192. | 
|  | * Ext specifies whether an extension is connected to the motionp. | 
|  | */ | 
|  |  | 
|  | x = payload[0]; | 
|  | y = payload[1]; | 
|  | z = payload[2]; | 
|  |  | 
|  | x |= (((__u16)payload[3]) << 6) & 0xff00; | 
|  | y |= (((__u16)payload[4]) << 6) & 0xff00; | 
|  | z |= (((__u16)payload[5]) << 6) & 0xff00; | 
|  |  | 
|  | x -= 8192; | 
|  | y -= 8192; | 
|  | z -= 8192; | 
|  |  | 
|  | if (!(payload[3] & 0x02)) | 
|  | x *= 18; | 
|  | else | 
|  | x *= 9; | 
|  | if (!(payload[4] & 0x02)) | 
|  | y *= 18; | 
|  | else | 
|  | y *= 9; | 
|  | if (!(payload[3] & 0x01)) | 
|  | z *= 18; | 
|  | else | 
|  | z *= 9; | 
|  |  | 
|  | input_report_abs(ext->mp_input, ABS_RX, x); | 
|  | input_report_abs(ext->mp_input, ABS_RY, y); | 
|  | input_report_abs(ext->mp_input, ABS_RZ, z); | 
|  | input_sync(ext->mp_input); | 
|  |  | 
|  | plugged = payload[5] & 0x01; | 
|  | if (plugged != ext->mp_plugged) | 
|  | ext->mp_plugged = plugged; | 
|  | } | 
|  |  | 
|  | static void handler_nunchuck(struct wiimote_ext *ext, const __u8 *payload) | 
|  | { | 
|  | __s16 x, y, z, bx, by; | 
|  |  | 
|  | /*   Byte |   8    7 |  6    5 |  4    3 |  2 |  1  | | 
|  | *   -----+----------+---------+---------+----+-----+ | 
|  | *    1   |              Button X <7:0>             | | 
|  | *    2   |              Button Y <7:0>             | | 
|  | *   -----+----------+---------+---------+----+-----+ | 
|  | *    3   |               Speed X <9:2>             | | 
|  | *    4   |               Speed Y <9:2>             | | 
|  | *    5   |               Speed Z <9:2>             | | 
|  | *   -----+----------+---------+---------+----+-----+ | 
|  | *    6   | Z <1:0>  | Y <1:0> | X <1:0> | BC | BZ  | | 
|  | *   -----+----------+---------+---------+----+-----+ | 
|  | * Button X/Y is the analog stick. Speed X, Y and Z are the | 
|  | * accelerometer data in the same format as the wiimote's accelerometer. | 
|  | * The 6th byte contains the LSBs of the accelerometer data. | 
|  | * BC and BZ are the C and Z buttons: 0 means pressed | 
|  | * | 
|  | * If reported interleaved with motionp, then the layout changes. The | 
|  | * 5th and 6th byte changes to: | 
|  | *   -----+-----------------------------------+-----+ | 
|  | *    5   |            Speed Z <9:3>          | EXT | | 
|  | *   -----+--------+-----+-----+----+----+----+-----+ | 
|  | *    6   |Z <2:1> |Y <1>|X <1>| BC | BZ | 0  |  0  | | 
|  | *   -----+--------+-----+-----+----+----+----+-----+ | 
|  | * All three accelerometer values lose their LSB. The other data is | 
|  | * still available but slightly moved. | 
|  | * | 
|  | * Center data for button values is 128. Center value for accelerometer | 
|  | * values it 512 / 0x200 | 
|  | */ | 
|  |  | 
|  | bx = payload[0]; | 
|  | by = payload[1]; | 
|  | bx -= 128; | 
|  | by -= 128; | 
|  |  | 
|  | x = payload[2] << 2; | 
|  | y = payload[3] << 2; | 
|  | z = payload[4] << 2; | 
|  |  | 
|  | if (ext->motionp) { | 
|  | x |= (payload[5] >> 3) & 0x02; | 
|  | y |= (payload[5] >> 4) & 0x02; | 
|  | z &= ~0x4; | 
|  | z |= (payload[5] >> 5) & 0x06; | 
|  | } else { | 
|  | x |= (payload[5] >> 2) & 0x03; | 
|  | y |= (payload[5] >> 4) & 0x03; | 
|  | z |= (payload[5] >> 6) & 0x03; | 
|  | } | 
|  |  | 
|  | x -= 0x200; | 
|  | y -= 0x200; | 
|  | z -= 0x200; | 
|  |  | 
|  | input_report_abs(ext->input, ABS_HAT0X, bx); | 
|  | input_report_abs(ext->input, ABS_HAT0Y, by); | 
|  |  | 
|  | input_report_abs(ext->input, ABS_RX, x); | 
|  | input_report_abs(ext->input, ABS_RY, y); | 
|  | input_report_abs(ext->input, ABS_RZ, z); | 
|  |  | 
|  | if (ext->motionp) { | 
|  | input_report_key(ext->input, | 
|  | wiiext_keymap[WIIEXT_KEY_Z], !(payload[5] & 0x04)); | 
|  | input_report_key(ext->input, | 
|  | wiiext_keymap[WIIEXT_KEY_C], !(payload[5] & 0x08)); | 
|  | } else { | 
|  | input_report_key(ext->input, | 
|  | wiiext_keymap[WIIEXT_KEY_Z], !(payload[5] & 0x01)); | 
|  | input_report_key(ext->input, | 
|  | wiiext_keymap[WIIEXT_KEY_C], !(payload[5] & 0x02)); | 
|  | } | 
|  |  | 
|  | input_sync(ext->input); | 
|  | } | 
|  |  | 
|  | static void handler_classic(struct wiimote_ext *ext, const __u8 *payload) | 
|  | { | 
|  | __s8 rx, ry, lx, ly, lt, rt; | 
|  |  | 
|  | /*   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    1   | RX <5:4>  |              LX <5:0>             | | 
|  | *    2   | RX <3:2>  |              LY <5:0>             | | 
|  | *   -----+-----+-----+-----+-----------------------------+ | 
|  | *    3   |RX<1>| LT <5:4>  |         RY <5:1>            | | 
|  | *   -----+-----+-----------+-----------------------------+ | 
|  | *    4   |     LT <3:1>    |         RT <5:1>            | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    5   | BDR | BDD | BLT | B-  | BH  | B+  | BRT |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    6   | BZL | BB  | BY  | BA  | BX  | BZR | BDL | BDU | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | * All buttons are 0 if pressed | 
|  | * RX and RY are right analog stick | 
|  | * LX and LY are left analog stick | 
|  | * LT is left trigger, RT is right trigger | 
|  | * BLT is 0 if left trigger is fully pressed | 
|  | * BRT is 0 if right trigger is fully pressed | 
|  | * BDR, BDD, BDL, BDU form the D-Pad with right, down, left, up buttons | 
|  | * BZL is left Z button and BZR is right Z button | 
|  | * B-, BH, B+ are +, HOME and - buttons | 
|  | * BB, BY, BA, BX are A, B, X, Y buttons | 
|  | * LSB of RX, RY, LT, and RT are not transmitted and always 0. | 
|  | * | 
|  | * With motionp enabled it changes slightly to this: | 
|  | *   Byte |  8  |  7  |  6  |  5  |  4  |  3  |  2  |  1  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    1   | RX <4:3>  |          LX <5:1>           | BDU | | 
|  | *    2   | RX <2:1>  |          LY <5:1>           | BDL | | 
|  | *   -----+-----+-----+-----+-----------------------+-----+ | 
|  | *    3   |RX<0>| LT <4:3>  |         RY <4:0>            | | 
|  | *   -----+-----+-----------+-----------------------------+ | 
|  | *    4   |     LT <2:0>    |         RT <4:0>            | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    5   | BDR | BDD | BLT | B-  | BH  | B+  | BRT | EXT | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | *    6   | BZL | BB  | BY  | BA  | BX  | BZR |  0  |  0  | | 
|  | *   -----+-----+-----+-----+-----+-----+-----+-----+-----+ | 
|  | * Only the LSBs of LX and LY are lost. BDU and BDL are moved, the rest | 
|  | * is the same as before. | 
|  | */ | 
|  |  | 
|  | if (ext->motionp) { | 
|  | lx = payload[0] & 0x3e; | 
|  | ly = payload[0] & 0x3e; | 
|  | } else { | 
|  | lx = payload[0] & 0x3f; | 
|  | ly = payload[0] & 0x3f; | 
|  | } | 
|  |  | 
|  | rx = (payload[0] >> 3) & 0x14; | 
|  | rx |= (payload[1] >> 5) & 0x06; | 
|  | rx |= (payload[2] >> 7) & 0x01; | 
|  | ry = payload[2] & 0x1f; | 
|  |  | 
|  | rt = payload[3] & 0x1f; | 
|  | lt = (payload[2] >> 2) & 0x18; | 
|  | lt |= (payload[3] >> 5) & 0x07; | 
|  |  | 
|  | rx <<= 1; | 
|  | ry <<= 1; | 
|  | rt <<= 1; | 
|  | lt <<= 1; | 
|  |  | 
|  | input_report_abs(ext->input, ABS_HAT1X, lx - 0x20); | 
|  | input_report_abs(ext->input, ABS_HAT1Y, ly - 0x20); | 
|  | input_report_abs(ext->input, ABS_HAT2X, rx - 0x20); | 
|  | input_report_abs(ext->input, ABS_HAT2Y, ry - 0x20); | 
|  | input_report_abs(ext->input, ABS_HAT3X, rt - 0x20); | 
|  | input_report_abs(ext->input, ABS_HAT3Y, lt - 0x20); | 
|  |  | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RIGHT], | 
|  | !!(payload[4] & 0x80)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_DOWN], | 
|  | !!(payload[4] & 0x40)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LT], | 
|  | !!(payload[4] & 0x20)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_MINUS], | 
|  | !!(payload[4] & 0x10)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_HOME], | 
|  | !!(payload[4] & 0x08)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_PLUS], | 
|  | !!(payload[4] & 0x04)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_RT], | 
|  | !!(payload[4] & 0x02)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZL], | 
|  | !!(payload[5] & 0x80)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_B], | 
|  | !!(payload[5] & 0x40)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_Y], | 
|  | !!(payload[5] & 0x20)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_A], | 
|  | !!(payload[5] & 0x10)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_X], | 
|  | !!(payload[5] & 0x08)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_ZR], | 
|  | !!(payload[5] & 0x04)); | 
|  |  | 
|  | if (ext->motionp) { | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP], | 
|  | !!(payload[0] & 0x01)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT], | 
|  | !!(payload[1] & 0x01)); | 
|  | } else { | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_UP], | 
|  | !!(payload[5] & 0x01)); | 
|  | input_report_key(ext->input, wiiext_keymap[WIIEXT_KEY_LEFT], | 
|  | !!(payload[5] & 0x02)); | 
|  | } | 
|  |  | 
|  | input_sync(ext->input); | 
|  | } | 
|  |  | 
|  | static void handler_balance_board(struct wiimote_ext *ext, const __u8 *payload) | 
|  | { | 
|  | __s32 val[4], tmp; | 
|  | unsigned int i; | 
|  |  | 
|  | /*   Byte |  8  7  6  5  4  3  2  1  | | 
|  | *   -----+--------------------------+ | 
|  | *    1   |    Top Right <15:8>      | | 
|  | *    2   |    Top Right  <7:0>      | | 
|  | *   -----+--------------------------+ | 
|  | *    3   | Bottom Right <15:8>      | | 
|  | *    4   | Bottom Right  <7:0>      | | 
|  | *   -----+--------------------------+ | 
|  | *    5   |     Top Left <15:8>      | | 
|  | *    6   |     Top Left  <7:0>      | | 
|  | *   -----+--------------------------+ | 
|  | *    7   |  Bottom Left <15:8>      | | 
|  | *    8   |  Bottom Left  <7:0>      | | 
|  | *   -----+--------------------------+ | 
|  | * | 
|  | * These values represent the weight-measurements of the Wii-balance | 
|  | * board with 16bit precision. | 
|  | * | 
|  | * The balance-board is never reported interleaved with motionp. | 
|  | */ | 
|  |  | 
|  | val[0] = payload[0]; | 
|  | val[0] <<= 8; | 
|  | val[0] |= payload[1]; | 
|  |  | 
|  | val[1] = payload[2]; | 
|  | val[1] <<= 8; | 
|  | val[1] |= payload[3]; | 
|  |  | 
|  | val[2] = payload[4]; | 
|  | val[2] <<= 8; | 
|  | val[2] |= payload[5]; | 
|  |  | 
|  | val[3] = payload[6]; | 
|  | val[3] <<= 8; | 
|  | val[3] |= payload[7]; | 
|  |  | 
|  | /* apply calibration data */ | 
|  | for (i = 0; i < 4; i++) { | 
|  | if (val[i] < ext->calib[i][1]) { | 
|  | tmp = val[i] - ext->calib[i][0]; | 
|  | tmp *= 1700; | 
|  | tmp /= ext->calib[i][1] - ext->calib[i][0]; | 
|  | } else { | 
|  | tmp = val[i] - ext->calib[i][1]; | 
|  | tmp *= 1700; | 
|  | tmp /= ext->calib[i][2] - ext->calib[i][1]; | 
|  | tmp += 1700; | 
|  | } | 
|  | val[i] = tmp; | 
|  | } | 
|  |  | 
|  | input_report_abs(ext->input, ABS_HAT0X, val[0]); | 
|  | input_report_abs(ext->input, ABS_HAT0Y, val[1]); | 
|  | input_report_abs(ext->input, ABS_HAT1X, val[2]); | 
|  | input_report_abs(ext->input, ABS_HAT1Y, val[3]); | 
|  |  | 
|  | input_sync(ext->input); | 
|  | } | 
|  |  | 
|  | /* call this with state.lock spinlock held */ | 
|  | void wiiext_handle(struct wiimote_data *wdata, const __u8 *payload) | 
|  | { | 
|  | struct wiimote_ext *ext = wdata->ext; | 
|  |  | 
|  | if (!ext) | 
|  | return; | 
|  |  | 
|  | if (ext->motionp && (payload[5] & 0x02)) { | 
|  | handler_motionp(ext, payload); | 
|  | } else if (ext->ext_type == WIIEXT_NUNCHUCK) { | 
|  | handler_nunchuck(ext, payload); | 
|  | } else if (ext->ext_type == WIIEXT_CLASSIC) { | 
|  | handler_classic(ext, payload); | 
|  | } else if (ext->ext_type == WIIEXT_BALANCE_BOARD) { | 
|  | handler_balance_board(ext, payload); | 
|  | } | 
|  | } | 
|  |  | 
|  | static ssize_t wiiext_show(struct device *dev, struct device_attribute *attr, | 
|  | char *buf) | 
|  | { | 
|  | struct wiimote_data *wdata = dev_to_wii(dev); | 
|  | __u8 type = WIIEXT_NONE; | 
|  | bool motionp = false; | 
|  | unsigned long flags; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | if (wdata->ext) { | 
|  | motionp = wdata->ext->motionp; | 
|  | type = wdata->ext->ext_type; | 
|  | } | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | if (type == WIIEXT_NUNCHUCK) { | 
|  | if (motionp) | 
|  | return sprintf(buf, "motionp+nunchuck\n"); | 
|  | else | 
|  | return sprintf(buf, "nunchuck\n"); | 
|  | } else if (type == WIIEXT_CLASSIC) { | 
|  | if (motionp) | 
|  | return sprintf(buf, "motionp+classic\n"); | 
|  | else | 
|  | return sprintf(buf, "classic\n"); | 
|  | } else if (type == WIIEXT_BALANCE_BOARD) { | 
|  | if (motionp) | 
|  | return sprintf(buf, "motionp+balanceboard\n"); | 
|  | else | 
|  | return sprintf(buf, "balanceboard\n"); | 
|  | } else { | 
|  | if (motionp) | 
|  | return sprintf(buf, "motionp\n"); | 
|  | else | 
|  | return sprintf(buf, "none\n"); | 
|  | } | 
|  | } | 
|  |  | 
|  | static DEVICE_ATTR(extension, S_IRUGO, wiiext_show, NULL); | 
|  |  | 
|  | static int wiiext_input_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_ext *ext = input_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = hid_hw_open(ext->wdata->hdev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | atomic_inc(&ext->opened); | 
|  | wiiext_schedule(ext); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiiext_input_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_ext *ext = input_get_drvdata(dev); | 
|  |  | 
|  | atomic_dec(&ext->opened); | 
|  | wiiext_schedule(ext); | 
|  | hid_hw_close(ext->wdata->hdev); | 
|  | } | 
|  |  | 
|  | static int wiiext_mp_open(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_ext *ext = input_get_drvdata(dev); | 
|  | int ret; | 
|  |  | 
|  | ret = hid_hw_open(ext->wdata->hdev); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | atomic_inc(&ext->mp_opened); | 
|  | wiiext_schedule(ext); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static void wiiext_mp_close(struct input_dev *dev) | 
|  | { | 
|  | struct wiimote_ext *ext = input_get_drvdata(dev); | 
|  |  | 
|  | atomic_dec(&ext->mp_opened); | 
|  | wiiext_schedule(ext); | 
|  | hid_hw_close(ext->wdata->hdev); | 
|  | } | 
|  |  | 
|  | /* Initializes the extension driver of a wiimote */ | 
|  | int wiiext_init(struct wiimote_data *wdata) | 
|  | { | 
|  | struct wiimote_ext *ext; | 
|  | unsigned long flags; | 
|  | int ret, i; | 
|  |  | 
|  | ext = kzalloc(sizeof(*ext), GFP_KERNEL); | 
|  | if (!ext) | 
|  | return -ENOMEM; | 
|  |  | 
|  | ext->wdata = wdata; | 
|  | INIT_WORK(&ext->worker, wiiext_worker); | 
|  |  | 
|  | ext->input = input_allocate_device(); | 
|  | if (!ext->input) { | 
|  | ret = -ENOMEM; | 
|  | goto err_input; | 
|  | } | 
|  |  | 
|  | input_set_drvdata(ext->input, ext); | 
|  | ext->input->open = wiiext_input_open; | 
|  | ext->input->close = wiiext_input_close; | 
|  | ext->input->dev.parent = &wdata->hdev->dev; | 
|  | ext->input->id.bustype = wdata->hdev->bus; | 
|  | ext->input->id.vendor = wdata->hdev->vendor; | 
|  | ext->input->id.product = wdata->hdev->product; | 
|  | ext->input->id.version = wdata->hdev->version; | 
|  | ext->input->name = WIIMOTE_NAME " Extension"; | 
|  |  | 
|  | set_bit(EV_KEY, ext->input->evbit); | 
|  | for (i = 0; i < WIIEXT_KEY_COUNT; ++i) | 
|  | set_bit(wiiext_keymap[i], ext->input->keybit); | 
|  |  | 
|  | set_bit(EV_ABS, ext->input->evbit); | 
|  | set_bit(ABS_HAT0X, ext->input->absbit); | 
|  | set_bit(ABS_HAT0Y, ext->input->absbit); | 
|  | set_bit(ABS_HAT1X, ext->input->absbit); | 
|  | set_bit(ABS_HAT1Y, ext->input->absbit); | 
|  | set_bit(ABS_HAT2X, ext->input->absbit); | 
|  | set_bit(ABS_HAT2Y, ext->input->absbit); | 
|  | set_bit(ABS_HAT3X, ext->input->absbit); | 
|  | set_bit(ABS_HAT3Y, ext->input->absbit); | 
|  | input_set_abs_params(ext->input, ABS_HAT0X, -120, 120, 2, 4); | 
|  | input_set_abs_params(ext->input, ABS_HAT0Y, -120, 120, 2, 4); | 
|  | input_set_abs_params(ext->input, ABS_HAT1X, -30, 30, 1, 1); | 
|  | input_set_abs_params(ext->input, ABS_HAT1Y, -30, 30, 1, 1); | 
|  | input_set_abs_params(ext->input, ABS_HAT2X, -30, 30, 1, 1); | 
|  | input_set_abs_params(ext->input, ABS_HAT2Y, -30, 30, 1, 1); | 
|  | input_set_abs_params(ext->input, ABS_HAT3X, -30, 30, 1, 1); | 
|  | input_set_abs_params(ext->input, ABS_HAT3Y, -30, 30, 1, 1); | 
|  | set_bit(ABS_RX, ext->input->absbit); | 
|  | set_bit(ABS_RY, ext->input->absbit); | 
|  | set_bit(ABS_RZ, ext->input->absbit); | 
|  | input_set_abs_params(ext->input, ABS_RX, -500, 500, 2, 4); | 
|  | input_set_abs_params(ext->input, ABS_RY, -500, 500, 2, 4); | 
|  | input_set_abs_params(ext->input, ABS_RZ, -500, 500, 2, 4); | 
|  |  | 
|  | ret = input_register_device(ext->input); | 
|  | if (ret) { | 
|  | input_free_device(ext->input); | 
|  | goto err_input; | 
|  | } | 
|  |  | 
|  | ext->mp_input = input_allocate_device(); | 
|  | if (!ext->mp_input) { | 
|  | ret = -ENOMEM; | 
|  | goto err_mp; | 
|  | } | 
|  |  | 
|  | input_set_drvdata(ext->mp_input, ext); | 
|  | ext->mp_input->open = wiiext_mp_open; | 
|  | ext->mp_input->close = wiiext_mp_close; | 
|  | ext->mp_input->dev.parent = &wdata->hdev->dev; | 
|  | ext->mp_input->id.bustype = wdata->hdev->bus; | 
|  | ext->mp_input->id.vendor = wdata->hdev->vendor; | 
|  | ext->mp_input->id.product = wdata->hdev->product; | 
|  | ext->mp_input->id.version = wdata->hdev->version; | 
|  | ext->mp_input->name = WIIMOTE_NAME " Motion+"; | 
|  |  | 
|  | set_bit(EV_ABS, ext->mp_input->evbit); | 
|  | set_bit(ABS_RX, ext->mp_input->absbit); | 
|  | set_bit(ABS_RY, ext->mp_input->absbit); | 
|  | set_bit(ABS_RZ, ext->mp_input->absbit); | 
|  | input_set_abs_params(ext->mp_input, ABS_RX, -160000, 160000, 4, 8); | 
|  | input_set_abs_params(ext->mp_input, ABS_RY, -160000, 160000, 4, 8); | 
|  | input_set_abs_params(ext->mp_input, ABS_RZ, -160000, 160000, 4, 8); | 
|  |  | 
|  | ret = input_register_device(ext->mp_input); | 
|  | if (ret) { | 
|  | input_free_device(ext->mp_input); | 
|  | goto err_mp; | 
|  | } | 
|  |  | 
|  | ret = device_create_file(&wdata->hdev->dev, &dev_attr_extension); | 
|  | if (ret) | 
|  | goto err_dev; | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->ext = ext; | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_dev: | 
|  | input_unregister_device(ext->mp_input); | 
|  | err_mp: | 
|  | input_unregister_device(ext->input); | 
|  | err_input: | 
|  | kfree(ext); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* Deinitializes the extension driver of a wiimote */ | 
|  | void wiiext_deinit(struct wiimote_data *wdata) | 
|  | { | 
|  | struct wiimote_ext *ext = wdata->ext; | 
|  | unsigned long flags; | 
|  |  | 
|  | if (!ext) | 
|  | return; | 
|  |  | 
|  | /* | 
|  | * We first unset wdata->ext to avoid further input from the wiimote | 
|  | * core. The worker thread does not access this pointer so it is not | 
|  | * affected by this. | 
|  | * We kill the worker after this so it does not get respawned during | 
|  | * deinitialization. | 
|  | */ | 
|  |  | 
|  | spin_lock_irqsave(&wdata->state.lock, flags); | 
|  | wdata->ext = NULL; | 
|  | spin_unlock_irqrestore(&wdata->state.lock, flags); | 
|  |  | 
|  | device_remove_file(&wdata->hdev->dev, &dev_attr_extension); | 
|  | input_unregister_device(ext->mp_input); | 
|  | input_unregister_device(ext->input); | 
|  |  | 
|  | cancel_work_sync(&ext->worker); | 
|  | kfree(ext); | 
|  | } |