| /* | 
 | net-3-driver for the IBM LAN Adapter/A | 
 |  | 
 | This is an extension to the Linux operating system, and is covered by the | 
 | same GNU General Public License that covers that work. | 
 |  | 
 | Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de, | 
 |                                  alfred.arnold@lancom.de) | 
 |  | 
 | This driver is based both on the SK_MCA driver, which is itself based on the | 
 | SK_G16 and 3C523 driver. | 
 |  | 
 | paper sources: | 
 |   'PC Hardware: Aufbau, Funktionsweise, Programmierung' by | 
 |   Hans-Peter Messmer for the basic Microchannel stuff | 
 |  | 
 |   'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer | 
 |   for help on Ethernet driver programming | 
 |  | 
 |   'DP83934CVUL-20/25 MHz SONIC-T Ethernet Controller Datasheet' by National | 
 |   Semiconductor for info on the MAC chip | 
 |  | 
 |   'LAN Technical Reference Ethernet Adapter Interface Version 1 Release 1.0 | 
 |    Document Number SC30-3661-00' by IBM for info on the adapter itself | 
 |  | 
 |   Also see http://www.natsemi.com/ | 
 |  | 
 | special acknowledgements to: | 
 |   - Bob Eager for helping me out with documentation from IBM | 
 |   - Jim Shorney for his endless patience with me while I was using | 
 |     him as a beta tester to trace down the address filter bug ;-) | 
 |  | 
 |   Missing things: | 
 |  | 
 |   -> set debug level via ioctl instead of compile-time switches | 
 |   -> I didn't follow the development of the 2.1.x kernels, so my | 
 |      assumptions about which things changed with which kernel version | 
 |      are probably nonsense | 
 |  | 
 | History: | 
 |   Nov 6th, 1999 | 
 |   	startup from SK_MCA driver | 
 |   Dec 6th, 1999 | 
 | 	finally got docs about the card.  A big thank you to Bob Eager! | 
 |   Dec 12th, 1999 | 
 | 	first packet received | 
 |   Dec 13th, 1999 | 
 | 	recv queue done, tcpdump works | 
 |   Dec 15th, 1999 | 
 | 	transmission part works | 
 |   Dec 28th, 1999 | 
 | 	added usage of the isa_functions for Linux 2.3 .  Things should | 
 | 	still work with 2.0.x.... | 
 |   Jan 28th, 2000 | 
 | 	in Linux 2.2.13, the version.h file mysteriously didn't get | 
 | 	included.  Added a workaround for this.  Futhermore, it now | 
 | 	not only compiles as a modules ;-) | 
 |   Jan 30th, 2000 | 
 | 	newer kernels automatically probe more than one board, so the | 
 | 	'startslot' as a variable is also needed here | 
 |   Apr 12th, 2000 | 
 | 	the interrupt mask register is not set 'hard' instead of individually | 
 | 	setting registers, since this seems to set bits that shouldn't be | 
 | 	set | 
 |   May 21st, 2000 | 
 | 	reset interrupt status immediately after CAM load | 
 | 	add a recovery delay after releasing the chip's reset line | 
 |   May 24th, 2000 | 
 | 	finally found the bug in the address filter setup - damned signed | 
 |         chars! | 
 |   June 1st, 2000 | 
 | 	corrected version codes, added support for the latest 2.3 changes | 
 |   Oct 28th, 2002 | 
 |   	cleaned up for the 2.5 tree <alan@redhat.com> | 
 |  | 
 |  *************************************************************************/ | 
 |  | 
 | #include <linux/kernel.h> | 
 | #include <linux/string.h> | 
 | #include <linux/errno.h> | 
 | #include <linux/ioport.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/interrupt.h> | 
 | #include <linux/delay.h> | 
 | #include <linux/time.h> | 
 | #include <linux/mca.h> | 
 | #include <linux/module.h> | 
 | #include <linux/netdevice.h> | 
 | #include <linux/etherdevice.h> | 
 | #include <linux/skbuff.h> | 
 | #include <linux/bitops.h> | 
 |  | 
 | #include <asm/processor.h> | 
 | #include <asm/io.h> | 
 |  | 
 | #define _IBM_LANA_DRIVER_ | 
 | #include "ibmlana.h" | 
 |  | 
 | #undef DEBUG | 
 |  | 
 | #define DRV_NAME "ibmlana" | 
 |  | 
 | /* ------------------------------------------------------------------------ | 
 |  * global static data - not more since we can handle multiple boards and | 
 |  * have to pack all state info into the device struct! | 
 |  * ------------------------------------------------------------------------ */ | 
 |  | 
 | static char *MediaNames[Media_Count] = { | 
 | 	"10BaseT", "10Base5", "Unknown", "10Base2" | 
 | }; | 
 |  | 
 | /* ------------------------------------------------------------------------ | 
 |  * private subfunctions | 
 |  * ------------------------------------------------------------------------ */ | 
 |  | 
 | #ifdef DEBUG | 
 |   /* dump all registers */ | 
 |  | 
 | static void dumpregs(struct net_device *dev) | 
 | { | 
 | 	int z; | 
 |  | 
 | 	for (z = 0; z < 160; z += 2) { | 
 | 		if (!(z & 15)) | 
 | 			printk("REGS: %04x:", z); | 
 | 		printk(" %04x", inw(dev->base_addr + z)); | 
 | 		if ((z & 15) == 14) | 
 | 			printk("\n"); | 
 | 	} | 
 | } | 
 |  | 
 | /* dump parts of shared memory - only needed during debugging */ | 
 |  | 
 | static void dumpmem(struct net_device *dev, u32 start, u32 len) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 | 	int z; | 
 |  | 
 | 	printk("Address %04x:\n", start); | 
 | 	for (z = 0; z < len; z++) { | 
 | 		if ((z & 15) == 0) | 
 | 			printk("%04x:", z); | 
 | 		printk(" %02x", readb(priv->base + start + z)); | 
 | 		if ((z & 15) == 15) | 
 | 			printk("\n"); | 
 | 	} | 
 | 	if ((z & 15) != 0) | 
 | 		printk("\n"); | 
 | } | 
 |  | 
 | /* print exact time - ditto */ | 
 |  | 
 | static void PrTime(void) | 
 | { | 
 | 	struct timeval tv; | 
 |  | 
 | 	do_gettimeofday(&tv); | 
 | 	printk("%9d:%06d: ", (int) tv.tv_sec, (int) tv.tv_usec); | 
 | } | 
 | #endif				/* DEBUG */ | 
 |  | 
 | /* deduce resources out of POS registers */ | 
 |  | 
 | static void getaddrs(struct mca_device *mdev, int *base, int *memlen, | 
 | 		     int *iobase, int *irq, ibmlana_medium *medium) | 
 | { | 
 | 	u_char pos0, pos1; | 
 |  | 
 | 	pos0 = mca_device_read_stored_pos(mdev, 2); | 
 | 	pos1 = mca_device_read_stored_pos(mdev, 3); | 
 |  | 
 | 	*base = 0xc0000 + ((pos1 & 0xf0) << 9); | 
 | 	*memlen = (pos1 & 0x01) ? 0x8000 : 0x4000; | 
 | 	*iobase = (pos0 & 0xe0) << 7; | 
 | 	switch (pos0 & 0x06) { | 
 | 	case 0: | 
 | 		*irq = 5; | 
 | 		break; | 
 | 	case 2: | 
 | 		*irq = 15; | 
 | 		break; | 
 | 	case 4: | 
 | 		*irq = 10; | 
 | 		break; | 
 | 	case 6: | 
 | 		*irq = 11; | 
 | 		break; | 
 | 	} | 
 | 	*medium = (pos0 & 0x18) >> 3; | 
 | } | 
 |  | 
 | /* wait on register value with mask and timeout */ | 
 |  | 
 | static int wait_timeout(struct net_device *dev, int regoffs, u16 mask, | 
 | 			u16 value, int timeout) | 
 | { | 
 | 	unsigned long fin = jiffies + timeout; | 
 |  | 
 | 	while (time_before(jiffies,fin)) | 
 | 		if ((inw(dev->base_addr + regoffs) & mask) == value) | 
 | 			return 1; | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 |  | 
 | /* reset the whole board */ | 
 |  | 
 | static void ResetBoard(struct net_device *dev) | 
 | { | 
 | 	unsigned char bcmval; | 
 |  | 
 | 	/* read original board control value */ | 
 |  | 
 | 	bcmval = inb(dev->base_addr + BCMREG); | 
 |  | 
 | 	/* set reset bit for a while */ | 
 |  | 
 | 	bcmval |= BCMREG_RESET; | 
 | 	outb(bcmval, dev->base_addr + BCMREG); | 
 | 	udelay(10); | 
 | 	bcmval &= ~BCMREG_RESET; | 
 | 	outb(bcmval, dev->base_addr + BCMREG); | 
 |  | 
 | 	/* switch over to RAM again */ | 
 |  | 
 | 	bcmval |= BCMREG_RAMEN | BCMREG_RAMWIN; | 
 | 	outb(bcmval, dev->base_addr + BCMREG); | 
 | } | 
 |  | 
 | /* calculate RAM layout & set up descriptors in RAM */ | 
 |  | 
 | static void InitDscrs(struct net_device *dev) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 | 	u32 addr, baddr, raddr; | 
 | 	int z; | 
 | 	tda_t tda; | 
 | 	rda_t rda; | 
 | 	rra_t rra; | 
 |  | 
 | 	/* initialize RAM */ | 
 |  | 
 | 	memset_io(priv->base, 0xaa, | 
 | 		      dev->mem_start - dev->mem_start);	/* XXX: typo? */ | 
 |  | 
 | 	/* setup n TX descriptors - independent of RAM size */ | 
 |  | 
 | 	priv->tdastart = addr = 0; | 
 | 	priv->txbufstart = baddr = sizeof(tda_t) * TXBUFCNT; | 
 | 	for (z = 0; z < TXBUFCNT; z++) { | 
 | 		tda.status = 0; | 
 | 		tda.config = 0; | 
 | 		tda.length = 0; | 
 | 		tda.fragcount = 1; | 
 | 		tda.startlo = baddr; | 
 | 		tda.starthi = 0; | 
 | 		tda.fraglength = 0; | 
 | 		if (z == TXBUFCNT - 1) | 
 | 			tda.link = priv->tdastart; | 
 | 		else | 
 | 			tda.link = addr + sizeof(tda_t); | 
 | 		tda.link |= 1; | 
 | 		memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); | 
 | 		addr += sizeof(tda_t); | 
 | 		baddr += PKTSIZE; | 
 | 	} | 
 |  | 
 | 	/* calculate how many receive buffers fit into remaining memory */ | 
 |  | 
 | 	priv->rxbufcnt = (dev->mem_end - dev->mem_start - baddr) / (sizeof(rra_t) + sizeof(rda_t) + PKTSIZE); | 
 |  | 
 | 	/* calculate receive addresses */ | 
 |  | 
 | 	priv->rrastart = raddr = priv->txbufstart + (TXBUFCNT * PKTSIZE); | 
 | 	priv->rdastart = addr = priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)); | 
 | 	priv->rxbufstart = baddr = priv->rdastart + (priv->rxbufcnt * sizeof(rda_t)); | 
 |  | 
 | 	for (z = 0; z < priv->rxbufcnt; z++) { | 
 | 		rra.startlo = baddr; | 
 | 		rra.starthi = 0; | 
 | 		rra.cntlo = PKTSIZE >> 1; | 
 | 		rra.cnthi = 0; | 
 | 		memcpy_toio(priv->base + raddr, &rra, sizeof(rra_t)); | 
 |  | 
 | 		rda.status = 0; | 
 | 		rda.length = 0; | 
 | 		rda.startlo = 0; | 
 | 		rda.starthi = 0; | 
 | 		rda.seqno = 0; | 
 | 		if (z < priv->rxbufcnt - 1) | 
 | 			rda.link = addr + sizeof(rda_t); | 
 | 		else | 
 | 			rda.link = 1; | 
 | 		rda.inuse = 1; | 
 | 		memcpy_toio(priv->base + addr, &rda, sizeof(rda_t)); | 
 |  | 
 | 		baddr += PKTSIZE; | 
 | 		raddr += sizeof(rra_t); | 
 | 		addr += sizeof(rda_t); | 
 | 	} | 
 |  | 
 | 	/* initialize current pointers */ | 
 |  | 
 | 	priv->nextrxdescr = 0; | 
 | 	priv->lastrxdescr = priv->rxbufcnt - 1; | 
 | 	priv->nexttxdescr = 0; | 
 | 	priv->currtxdescr = 0; | 
 | 	priv->txusedcnt = 0; | 
 | 	memset(priv->txused, 0, sizeof(priv->txused)); | 
 | } | 
 |  | 
 | /* set up Rx + Tx descriptors in SONIC */ | 
 |  | 
 | static int InitSONIC(struct net_device *dev) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 |  | 
 | 	/* set up start & end of resource area */ | 
 |  | 
 | 	outw(0, SONIC_URRA); | 
 | 	outw(priv->rrastart, dev->base_addr + SONIC_RSA); | 
 | 	outw(priv->rrastart + (priv->rxbufcnt * sizeof(rra_t)), dev->base_addr + SONIC_REA); | 
 | 	outw(priv->rrastart, dev->base_addr + SONIC_RRP); | 
 | 	outw(priv->rrastart, dev->base_addr + SONIC_RWP); | 
 |  | 
 | 	/* set EOBC so that only one packet goes into one buffer */ | 
 |  | 
 | 	outw((PKTSIZE - 4) >> 1, dev->base_addr + SONIC_EOBC); | 
 |  | 
 | 	/* let SONIC read the first RRA descriptor */ | 
 |  | 
 | 	outw(CMDREG_RRRA, dev->base_addr + SONIC_CMDREG); | 
 | 	if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_RRRA, 0, 2)) { | 
 | 		printk(KERN_ERR "%s: SONIC did not respond on RRRA command - giving up.", dev->name); | 
 | 		return 0; | 
 | 	} | 
 |  | 
 | 	/* point SONIC to the first RDA */ | 
 |  | 
 | 	outw(0, dev->base_addr + SONIC_URDA); | 
 | 	outw(priv->rdastart, dev->base_addr + SONIC_CRDA); | 
 |  | 
 | 	/* set upper half of TDA address */ | 
 |  | 
 | 	outw(0, dev->base_addr + SONIC_UTDA); | 
 |  | 
 | 	return 1; | 
 | } | 
 |  | 
 | /* stop SONIC so we can reinitialize it */ | 
 |  | 
 | static void StopSONIC(struct net_device *dev) | 
 | { | 
 | 	/* disable interrupts */ | 
 |  | 
 | 	outb(inb(dev->base_addr + BCMREG) & (~BCMREG_IEN), dev->base_addr + BCMREG); | 
 | 	outb(0, dev->base_addr + SONIC_IMREG); | 
 |  | 
 | 	/* reset the SONIC */ | 
 |  | 
 | 	outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); | 
 | 	udelay(10); | 
 | 	outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); | 
 | } | 
 |  | 
 | /* initialize card and SONIC for proper operation */ | 
 |  | 
 | static void putcam(camentry_t * cams, int *camcnt, char *addr) | 
 | { | 
 | 	camentry_t *pcam = cams + (*camcnt); | 
 | 	u8 *uaddr = (u8 *) addr; | 
 |  | 
 | 	pcam->index = *camcnt; | 
 | 	pcam->addr0 = (((u16) uaddr[1]) << 8) | uaddr[0]; | 
 | 	pcam->addr1 = (((u16) uaddr[3]) << 8) | uaddr[2]; | 
 | 	pcam->addr2 = (((u16) uaddr[5]) << 8) | uaddr[4]; | 
 | 	(*camcnt)++; | 
 | } | 
 |  | 
 | static void InitBoard(struct net_device *dev) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 | 	int camcnt; | 
 | 	camentry_t cams[16]; | 
 | 	u32 cammask; | 
 | 	struct dev_mc_list *mcptr; | 
 | 	u16 rcrval; | 
 |  | 
 | 	/* reset the SONIC */ | 
 |  | 
 | 	outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); | 
 | 	udelay(10); | 
 |  | 
 | 	/* clear all spurious interrupts */ | 
 |  | 
 | 	outw(inw(dev->base_addr + SONIC_ISREG), dev->base_addr + SONIC_ISREG); | 
 |  | 
 | 	/* set up the SONIC's bus interface - constant for this adapter - | 
 | 	   must be done while the SONIC is in reset */ | 
 |  | 
 | 	outw(DCREG_USR1 | DCREG_USR0 | DCREG_WC1 | DCREG_DW32, dev->base_addr + SONIC_DCREG); | 
 | 	outw(0, dev->base_addr + SONIC_DCREG2); | 
 |  | 
 | 	/* remove reset form the SONIC */ | 
 |  | 
 | 	outw(0, dev->base_addr + SONIC_CMDREG); | 
 | 	udelay(10); | 
 |  | 
 | 	/* data sheet requires URRA to be programmed before setting up the CAM contents */ | 
 |  | 
 | 	outw(0, dev->base_addr + SONIC_URRA); | 
 |  | 
 | 	/* program the CAM entry 0 to the device address */ | 
 |  | 
 | 	camcnt = 0; | 
 | 	putcam(cams, &camcnt, dev->dev_addr); | 
 |  | 
 | 	/* start putting the multicast addresses into the CAM list.  Stop if | 
 | 	   it is full. */ | 
 |  | 
 | 	for (mcptr = dev->mc_list; mcptr != NULL; mcptr = mcptr->next) { | 
 | 		putcam(cams, &camcnt, mcptr->dmi_addr); | 
 | 		if (camcnt == 16) | 
 | 			break; | 
 | 	} | 
 |  | 
 | 	/* calculate CAM mask */ | 
 |  | 
 | 	cammask = (1 << camcnt) - 1; | 
 |  | 
 | 	/* feed CDA into SONIC, initialize RCR value (always get broadcasts) */ | 
 |  | 
 | 	memcpy_toio(priv->base, cams, sizeof(camentry_t) * camcnt); | 
 | 	memcpy_toio(priv->base + (sizeof(camentry_t) * camcnt), &cammask, sizeof(cammask)); | 
 |  | 
 | #ifdef DEBUG | 
 | 	printk("CAM setup:\n"); | 
 | 	dumpmem(dev, 0, sizeof(camentry_t) * camcnt + sizeof(cammask)); | 
 | #endif | 
 |  | 
 | 	outw(0, dev->base_addr + SONIC_CAMPTR); | 
 | 	outw(camcnt, dev->base_addr + SONIC_CAMCNT); | 
 | 	outw(CMDREG_LCAM, dev->base_addr + SONIC_CMDREG); | 
 | 	if (!wait_timeout(dev, SONIC_CMDREG, CMDREG_LCAM, 0, 2)) { | 
 | 		printk(KERN_ERR "%s:SONIC did not respond on LCAM command - giving up.", dev->name); | 
 | 		return; | 
 | 	} else { | 
 | 		/* clear interrupt condition */ | 
 |  | 
 | 		outw(ISREG_LCD, dev->base_addr + SONIC_ISREG); | 
 |  | 
 | #ifdef DEBUG | 
 | 		printk("Loading CAM done, address pointers %04x:%04x\n", | 
 | 		       inw(dev->base_addr + SONIC_URRA), | 
 | 		       inw(dev->base_addr + SONIC_CAMPTR)); | 
 | 		{ | 
 | 			int z; | 
 |  | 
 | 			printk("\n-->CAM: PTR %04x CNT %04x\n", | 
 | 			       inw(dev->base_addr + SONIC_CAMPTR), | 
 | 			       inw(dev->base_addr + SONIC_CAMCNT)); | 
 | 			outw(CMDREG_RST, dev->base_addr + SONIC_CMDREG); | 
 | 			for (z = 0; z < camcnt; z++) { | 
 | 				outw(z, dev->base_addr + SONIC_CAMEPTR); | 
 | 				printk("Entry %d: %04x %04x %04x\n", z, | 
 | 				       inw(dev->base_addr + SONIC_CAMADDR0), | 
 | 				       inw(dev->base_addr + SONIC_CAMADDR1), | 
 | 				       inw(dev->base_addr + SONIC_CAMADDR2)); | 
 | 			} | 
 | 			outw(0, dev->base_addr + SONIC_CMDREG); | 
 | 		} | 
 | #endif | 
 | 	} | 
 |  | 
 | 	rcrval = RCREG_BRD | RCREG_LB_NONE; | 
 |  | 
 | 	/* if still multicast addresses left or ALLMULTI is set, set the multicast | 
 | 	   enable bit */ | 
 |  | 
 | 	if ((dev->flags & IFF_ALLMULTI) || (mcptr != NULL)) | 
 | 		rcrval |= RCREG_AMC; | 
 |  | 
 | 	/* promiscous mode ? */ | 
 |  | 
 | 	if (dev->flags & IFF_PROMISC) | 
 | 		rcrval |= RCREG_PRO; | 
 |  | 
 | 	/* program receive mode */ | 
 |  | 
 | 	outw(rcrval, dev->base_addr + SONIC_RCREG); | 
 | #ifdef DEBUG | 
 | 	printk("\nRCRVAL: %04x\n", rcrval); | 
 | #endif | 
 |  | 
 | 	/* set up descriptors in shared memory + feed them into SONIC registers */ | 
 |  | 
 | 	InitDscrs(dev); | 
 | 	if (!InitSONIC(dev)) | 
 | 		return; | 
 |  | 
 | 	/* reset all pending interrupts */ | 
 |  | 
 | 	outw(0xffff, dev->base_addr + SONIC_ISREG); | 
 |  | 
 | 	/* enable transmitter + receiver interrupts */ | 
 |  | 
 | 	outw(CMDREG_RXEN, dev->base_addr + SONIC_CMDREG); | 
 | 	outw(IMREG_PRXEN | IMREG_RBEEN | IMREG_PTXEN | IMREG_TXEREN, dev->base_addr + SONIC_IMREG); | 
 |  | 
 | 	/* turn on card interrupts */ | 
 |  | 
 | 	outb(inb(dev->base_addr + BCMREG) | BCMREG_IEN, dev->base_addr + BCMREG); | 
 |  | 
 | #ifdef DEBUG | 
 | 	printk("Register dump after initialization:\n"); | 
 | 	dumpregs(dev); | 
 | #endif | 
 | } | 
 |  | 
 | /* start transmission of a descriptor */ | 
 |  | 
 | static void StartTx(struct net_device *dev, int descr) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 | 	int addr; | 
 |  | 
 | 	addr = priv->tdastart + (descr * sizeof(tda_t)); | 
 |  | 
 | 	/* put descriptor address into SONIC */ | 
 |  | 
 | 	outw(addr, dev->base_addr + SONIC_CTDA); | 
 |  | 
 | 	/* trigger transmitter */ | 
 |  | 
 | 	priv->currtxdescr = descr; | 
 | 	outw(CMDREG_TXP, dev->base_addr + SONIC_CMDREG); | 
 | } | 
 |  | 
 | /* ------------------------------------------------------------------------ | 
 |  * interrupt handler(s) | 
 |  * ------------------------------------------------------------------------ */ | 
 |  | 
 | /* receive buffer area exhausted */ | 
 |  | 
 | static void irqrbe_handler(struct net_device *dev) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 |  | 
 | 	/* point the SONIC back to the RRA start */ | 
 |  | 
 | 	outw(priv->rrastart, dev->base_addr + SONIC_RRP); | 
 | 	outw(priv->rrastart, dev->base_addr + SONIC_RWP); | 
 | } | 
 |  | 
 | /* receive interrupt */ | 
 |  | 
 | static void irqrx_handler(struct net_device *dev) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 | 	rda_t rda; | 
 | 	u32 rdaaddr, lrdaaddr; | 
 |  | 
 | 	/* loop until ... */ | 
 |  | 
 | 	while (1) { | 
 | 		/* read descriptor that was next to be filled by SONIC */ | 
 |  | 
 | 		rdaaddr = priv->rdastart + (priv->nextrxdescr * sizeof(rda_t)); | 
 | 		lrdaaddr = priv->rdastart + (priv->lastrxdescr * sizeof(rda_t)); | 
 | 		memcpy_fromio(&rda, priv->base + rdaaddr, sizeof(rda_t)); | 
 |  | 
 | 		/* iron out upper word halves of fields we use - SONIC will duplicate | 
 | 		   bits 0..15 to 16..31 */ | 
 |  | 
 | 		rda.status &= 0xffff; | 
 | 		rda.length &= 0xffff; | 
 | 		rda.startlo &= 0xffff; | 
 |  | 
 | 		/* stop if the SONIC still owns it, i.e. there is no data for us */ | 
 |  | 
 | 		if (rda.inuse) | 
 | 			break; | 
 |  | 
 | 		/* good packet? */ | 
 |  | 
 | 		else if (rda.status & RCREG_PRX) { | 
 | 			struct sk_buff *skb; | 
 |  | 
 | 			/* fetch buffer */ | 
 |  | 
 | 			skb = dev_alloc_skb(rda.length + 2); | 
 | 			if (skb == NULL) | 
 | 				dev->stats.rx_dropped++; | 
 | 			else { | 
 | 				/* copy out data */ | 
 |  | 
 | 				memcpy_fromio(skb_put(skb, rda.length), | 
 | 					       priv->base + | 
 | 					       rda.startlo, rda.length); | 
 |  | 
 | 				/* set up skb fields */ | 
 |  | 
 | 				skb->protocol = eth_type_trans(skb, dev); | 
 | 				skb->ip_summed = CHECKSUM_NONE; | 
 |  | 
 | 				/* bookkeeping */ | 
 | 				dev->last_rx = jiffies; | 
 | 				dev->stats.rx_packets++; | 
 | 				dev->stats.rx_bytes += rda.length; | 
 |  | 
 | 				/* pass to the upper layers */ | 
 | 				netif_rx(skb); | 
 | 			} | 
 | 		} | 
 |  | 
 | 		/* otherwise check error status bits and increase statistics */ | 
 |  | 
 | 		else { | 
 | 			dev->stats.rx_errors++; | 
 | 			if (rda.status & RCREG_FAER) | 
 | 				dev->stats.rx_frame_errors++; | 
 | 			if (rda.status & RCREG_CRCR) | 
 | 				dev->stats.rx_crc_errors++; | 
 | 		} | 
 |  | 
 | 		/* descriptor processed, will become new last descriptor in queue */ | 
 |  | 
 | 		rda.link = 1; | 
 | 		rda.inuse = 1; | 
 | 		memcpy_toio(priv->base + rdaaddr, &rda, | 
 | 			     sizeof(rda_t)); | 
 |  | 
 | 		/* set up link and EOL = 0 in currently last descriptor. Only write | 
 | 		   the link field since the SONIC may currently already access the | 
 | 		   other fields. */ | 
 |  | 
 | 		memcpy_toio(priv->base + lrdaaddr + 20, &rdaaddr, 4); | 
 |  | 
 | 		/* advance indices */ | 
 |  | 
 | 		priv->lastrxdescr = priv->nextrxdescr; | 
 | 		if ((++priv->nextrxdescr) >= priv->rxbufcnt) | 
 | 			priv->nextrxdescr = 0; | 
 | 	} | 
 | } | 
 |  | 
 | /* transmit interrupt */ | 
 |  | 
 | static void irqtx_handler(struct net_device *dev) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 | 	tda_t tda; | 
 |  | 
 | 	/* fetch descriptor (we forgot the size ;-) */ | 
 | 	memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); | 
 |  | 
 | 	/* update statistics */ | 
 | 	dev->stats.tx_packets++; | 
 | 	dev->stats.tx_bytes += tda.length; | 
 |  | 
 | 	/* update our pointers */ | 
 | 	priv->txused[priv->currtxdescr] = 0; | 
 | 	priv->txusedcnt--; | 
 |  | 
 | 	/* if there are more descriptors present in RAM, start them */ | 
 | 	if (priv->txusedcnt > 0) | 
 | 		StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); | 
 |  | 
 | 	/* tell the upper layer we can go on transmitting */ | 
 | 	netif_wake_queue(dev); | 
 | } | 
 |  | 
 | static void irqtxerr_handler(struct net_device *dev) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 | 	tda_t tda; | 
 |  | 
 | 	/* fetch descriptor to check status */ | 
 | 	memcpy_fromio(&tda, priv->base + priv->tdastart + (priv->currtxdescr * sizeof(tda_t)), sizeof(tda_t)); | 
 |  | 
 | 	/* update statistics */ | 
 | 	dev->stats.tx_errors++; | 
 | 	if (tda.status & (TCREG_NCRS | TCREG_CRSL)) | 
 | 		dev->stats.tx_carrier_errors++; | 
 | 	if (tda.status & TCREG_EXC) | 
 | 		dev->stats.tx_aborted_errors++; | 
 | 	if (tda.status & TCREG_OWC) | 
 | 		dev->stats.tx_window_errors++; | 
 | 	if (tda.status & TCREG_FU) | 
 | 		dev->stats.tx_fifo_errors++; | 
 |  | 
 | 	/* update our pointers */ | 
 | 	priv->txused[priv->currtxdescr] = 0; | 
 | 	priv->txusedcnt--; | 
 |  | 
 | 	/* if there are more descriptors present in RAM, start them */ | 
 | 	if (priv->txusedcnt > 0) | 
 | 		StartTx(dev, (priv->currtxdescr + 1) % TXBUFCNT); | 
 |  | 
 | 	/* tell the upper layer we can go on transmitting */ | 
 | 	netif_wake_queue(dev); | 
 | } | 
 |  | 
 | /* general interrupt entry */ | 
 |  | 
 | static irqreturn_t irq_handler(int dummy, void *device) | 
 | { | 
 | 	struct net_device *dev = device; | 
 | 	u16 ival; | 
 |  | 
 | 	/* in case we're not meant... */ | 
 | 	if (!(inb(dev->base_addr + BCMREG) & BCMREG_IPEND)) | 
 | 		return IRQ_NONE; | 
 |  | 
 | 	/* loop through the interrupt bits until everything is clear */ | 
 | 	while (1) { | 
 | 		ival = inw(dev->base_addr + SONIC_ISREG); | 
 |  | 
 | 		if (ival & ISREG_RBE) { | 
 | 			irqrbe_handler(dev); | 
 | 			outw(ISREG_RBE, dev->base_addr + SONIC_ISREG); | 
 | 		} | 
 | 		if (ival & ISREG_PKTRX) { | 
 | 			irqrx_handler(dev); | 
 | 			outw(ISREG_PKTRX, dev->base_addr + SONIC_ISREG); | 
 | 		} | 
 | 		if (ival & ISREG_TXDN) { | 
 | 			irqtx_handler(dev); | 
 | 			outw(ISREG_TXDN, dev->base_addr + SONIC_ISREG); | 
 | 		} | 
 | 		if (ival & ISREG_TXER) { | 
 | 			irqtxerr_handler(dev); | 
 | 			outw(ISREG_TXER, dev->base_addr + SONIC_ISREG); | 
 | 		} | 
 | 		break; | 
 | 	} | 
 | 	return IRQ_HANDLED; | 
 | } | 
 |  | 
 | /* ------------------------------------------------------------------------ | 
 |  * driver methods | 
 |  * ------------------------------------------------------------------------ */ | 
 |  | 
 | /* MCA info */ | 
 |  | 
 | #if 0 /* info available elsewhere, but this is kept for reference */ | 
 | static int ibmlana_getinfo(char *buf, int slot, void *d) | 
 | { | 
 | 	int len = 0, i; | 
 | 	struct net_device *dev = (struct net_device *) d; | 
 | 	ibmlana_priv *priv; | 
 |  | 
 | 	/* can't say anything about an uninitialized device... */ | 
 |  | 
 | 	if (dev == NULL) | 
 | 		return len; | 
 | 	priv = netdev_priv(dev); | 
 |  | 
 | 	/* print info */ | 
 |  | 
 | 	len += sprintf(buf + len, "IRQ: %d\n", priv->realirq); | 
 | 	len += sprintf(buf + len, "I/O: %#lx\n", dev->base_addr); | 
 | 	len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start, dev->mem_end - 1); | 
 | 	len += sprintf(buf + len, "Transceiver: %s\n", MediaNames[priv->medium]); | 
 | 	len += sprintf(buf + len, "Device: %s\n", dev->name); | 
 | 	len += sprintf(buf + len, "MAC address:"); | 
 | 	for (i = 0; i < 6; i++) | 
 | 		len += sprintf(buf + len, " %02x", dev->dev_addr[i]); | 
 | 	buf[len++] = '\n'; | 
 | 	buf[len] = 0; | 
 |  | 
 | 	return len; | 
 | } | 
 | #endif | 
 |  | 
 | /* open driver.  Means also initialization and start of LANCE */ | 
 |  | 
 | static int ibmlana_open(struct net_device *dev) | 
 | { | 
 | 	int result; | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 |  | 
 | 	/* register resources - only necessary for IRQ */ | 
 |  | 
 | 	result = request_irq(priv->realirq, irq_handler, IRQF_SHARED | IRQF_SAMPLE_RANDOM, dev->name, dev); | 
 | 	if (result != 0) { | 
 | 		printk(KERN_ERR "%s: failed to register irq %d\n", dev->name, dev->irq); | 
 | 		return result; | 
 | 	} | 
 | 	dev->irq = priv->realirq; | 
 |  | 
 | 	/* set up the card and SONIC */ | 
 | 	InitBoard(dev); | 
 |  | 
 | 	/* initialize operational flags */ | 
 | 	netif_start_queue(dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* close driver.  Shut down board and free allocated resources */ | 
 |  | 
 | static int ibmlana_close(struct net_device *dev) | 
 | { | 
 | 	/* turn off board */ | 
 |  | 
 | 	/* release resources */ | 
 | 	if (dev->irq != 0) | 
 | 		free_irq(dev->irq, dev); | 
 | 	dev->irq = 0; | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* transmit a block. */ | 
 |  | 
 | static int ibmlana_tx(struct sk_buff *skb, struct net_device *dev) | 
 | { | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 | 	int retval = 0, tmplen, addr; | 
 | 	unsigned long flags; | 
 | 	tda_t tda; | 
 | 	int baddr; | 
 |  | 
 | 	/* find out if there are free slots for a frame to transmit. If not, | 
 | 	   the upper layer is in deep desperation and we simply ignore the frame. */ | 
 |  | 
 | 	if (priv->txusedcnt >= TXBUFCNT) { | 
 | 		retval = -EIO; | 
 | 		dev->stats.tx_dropped++; | 
 | 		goto tx_done; | 
 | 	} | 
 |  | 
 | 	/* copy the frame data into the next free transmit buffer - fillup missing */ | 
 | 	tmplen = skb->len; | 
 | 	if (tmplen < 60) | 
 | 		tmplen = 60; | 
 | 	baddr = priv->txbufstart + (priv->nexttxdescr * PKTSIZE); | 
 | 	memcpy_toio(priv->base + baddr, skb->data, skb->len); | 
 |  | 
 | 	/* copy filler into RAM - in case we're filling up... | 
 | 	   we're filling a bit more than necessary, but that doesn't harm | 
 | 	   since the buffer is far larger... | 
 | 	   Sorry Linus for the filler string but I couldn't resist ;-) */ | 
 |  | 
 | 	if (tmplen > skb->len) { | 
 | 		char *fill = "NetBSD is a nice OS too! "; | 
 | 		unsigned int destoffs = skb->len, l = strlen(fill); | 
 |  | 
 | 		while (destoffs < tmplen) { | 
 | 			memcpy_toio(priv->base + baddr + destoffs, fill, l); | 
 | 			destoffs += l; | 
 | 		} | 
 | 	} | 
 |  | 
 | 	/* set up the new frame descriptor */ | 
 | 	addr = priv->tdastart + (priv->nexttxdescr * sizeof(tda_t)); | 
 | 	memcpy_fromio(&tda, priv->base + addr, sizeof(tda_t)); | 
 | 	tda.length = tda.fraglength = tmplen; | 
 | 	memcpy_toio(priv->base + addr, &tda, sizeof(tda_t)); | 
 |  | 
 | 	/* if there were no active descriptors, trigger the SONIC */ | 
 | 	spin_lock_irqsave(&priv->lock, flags); | 
 |  | 
 | 	priv->txusedcnt++; | 
 | 	priv->txused[priv->nexttxdescr] = 1; | 
 |  | 
 | 	/* are all transmission slots used up ? */ | 
 | 	if (priv->txusedcnt >= TXBUFCNT) | 
 | 		netif_stop_queue(dev); | 
 |  | 
 | 	if (priv->txusedcnt == 1) | 
 | 		StartTx(dev, priv->nexttxdescr); | 
 | 	priv->nexttxdescr = (priv->nexttxdescr + 1) % TXBUFCNT; | 
 |  | 
 | 	spin_unlock_irqrestore(&priv->lock, flags); | 
 | tx_done: | 
 | 	dev_kfree_skb(skb); | 
 | 	return retval; | 
 | } | 
 |  | 
 | /* switch receiver mode. */ | 
 |  | 
 | static void ibmlana_set_multicast_list(struct net_device *dev) | 
 | { | 
 | 	/* first stop the SONIC... */ | 
 | 	StopSONIC(dev); | 
 | 	/* ...then reinit it with the new flags */ | 
 | 	InitBoard(dev); | 
 | } | 
 |  | 
 | /* ------------------------------------------------------------------------ | 
 |  * hardware check | 
 |  * ------------------------------------------------------------------------ */ | 
 |  | 
 | static int ibmlana_irq; | 
 | static int ibmlana_io; | 
 | static int startslot;		/* counts through slots when probing multiple devices */ | 
 |  | 
 | static short ibmlana_adapter_ids[] __initdata = { | 
 | 	IBM_LANA_ID, | 
 | 	0x0000 | 
 | }; | 
 |  | 
 | static char *ibmlana_adapter_names[] __devinitdata = { | 
 | 	"IBM LAN Adapter/A", | 
 | 	NULL | 
 | }; | 
 |  | 
 | static int __devinit ibmlana_init_one(struct device *kdev) | 
 | { | 
 | 	struct mca_device *mdev = to_mca_device(kdev); | 
 | 	struct net_device *dev; | 
 | 	int slot = mdev->slot, z, rc; | 
 | 	int base = 0, irq = 0, iobase = 0, memlen = 0; | 
 | 	ibmlana_priv *priv; | 
 | 	ibmlana_medium medium; | 
 | 	DECLARE_MAC_BUF(mac); | 
 |  | 
 | 	dev = alloc_etherdev(sizeof(ibmlana_priv)); | 
 | 	if (!dev) | 
 | 		return -ENOMEM; | 
 |  | 
 | 	dev->irq = ibmlana_irq; | 
 | 	dev->base_addr = ibmlana_io; | 
 |  | 
 | 	base = dev->mem_start; | 
 | 	irq = dev->irq; | 
 |  | 
 | 	/* deduce card addresses */ | 
 | 	getaddrs(mdev, &base, &memlen, &iobase, &irq, &medium); | 
 |  | 
 | 	/* were we looking for something different ? */ | 
 | 	if (dev->irq && dev->irq != irq) { | 
 | 		rc = -ENODEV; | 
 | 		goto err_out; | 
 | 	} | 
 | 	if (dev->mem_start && dev->mem_start != base) { | 
 | 		rc = -ENODEV; | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 | 	/* announce success */ | 
 | 	printk(KERN_INFO "%s: IBM LAN Adapter/A found in slot %d\n", dev->name, slot + 1); | 
 |  | 
 | 	/* try to obtain I/O range */ | 
 | 	if (!request_region(iobase, IBM_LANA_IORANGE, DRV_NAME)) { | 
 | 		printk(KERN_ERR "%s: cannot allocate I/O range at %#x!\n", DRV_NAME, iobase); | 
 | 		startslot = slot + 1; | 
 | 		rc = -EBUSY; | 
 | 		goto err_out; | 
 | 	} | 
 |  | 
 | 	priv = netdev_priv(dev); | 
 | 	priv->slot = slot; | 
 | 	priv->realirq = mca_device_transform_irq(mdev, irq); | 
 | 	priv->medium = medium; | 
 | 	spin_lock_init(&priv->lock); | 
 |  | 
 | 	/* set base + irq for this device (irq not allocated so far) */ | 
 |  | 
 | 	dev->irq = 0; | 
 | 	dev->mem_start = base; | 
 | 	dev->mem_end = base + memlen; | 
 | 	dev->base_addr = iobase; | 
 |  | 
 | 	priv->base = ioremap(base, memlen); | 
 | 	if (!priv->base) { | 
 | 		printk(KERN_ERR "%s: cannot remap memory!\n", DRV_NAME); | 
 | 		startslot = slot + 1; | 
 | 		rc = -EBUSY; | 
 | 		goto err_out_reg; | 
 | 	} | 
 |  | 
 | 	mca_device_set_name(mdev, ibmlana_adapter_names[mdev->index]); | 
 | 	mca_device_set_claim(mdev, 1); | 
 |  | 
 | 	/* set methods */ | 
 |  | 
 | 	dev->open = ibmlana_open; | 
 | 	dev->stop = ibmlana_close; | 
 | 	dev->hard_start_xmit = ibmlana_tx; | 
 | 	dev->set_multicast_list = ibmlana_set_multicast_list; | 
 | 	dev->flags |= IFF_MULTICAST; | 
 |  | 
 | 	/* copy out MAC address */ | 
 |  | 
 | 	for (z = 0; z < sizeof(dev->dev_addr); z++) | 
 | 		dev->dev_addr[z] = inb(dev->base_addr + MACADDRPROM + z); | 
 |  | 
 | 	/* print config */ | 
 |  | 
 | 	printk(KERN_INFO "%s: IRQ %d, I/O %#lx, memory %#lx-%#lx, " | 
 | 	       "MAC address %s.\n", | 
 | 	       dev->name, priv->realirq, dev->base_addr, | 
 | 	       dev->mem_start, dev->mem_end - 1, | 
 | 	       print_mac(mac, dev->dev_addr)); | 
 | 	printk(KERN_INFO "%s: %s medium\n", dev->name, MediaNames[priv->medium]); | 
 |  | 
 | 	/* reset board */ | 
 |  | 
 | 	ResetBoard(dev); | 
 |  | 
 | 	/* next probe will start at next slot */ | 
 |  | 
 | 	startslot = slot + 1; | 
 |  | 
 | 	rc = register_netdev(dev); | 
 | 	if (rc) | 
 | 		goto err_out_claimed; | 
 |  | 
 | 	dev_set_drvdata(kdev, dev); | 
 | 	return 0; | 
 |  | 
 | err_out_claimed: | 
 | 	mca_device_set_claim(mdev, 0); | 
 | 	iounmap(priv->base); | 
 | err_out_reg: | 
 | 	release_region(iobase, IBM_LANA_IORANGE); | 
 | err_out: | 
 | 	free_netdev(dev); | 
 | 	return rc; | 
 | } | 
 |  | 
 | static int ibmlana_remove_one(struct device *kdev) | 
 | { | 
 | 	struct mca_device *mdev = to_mca_device(kdev); | 
 | 	struct net_device *dev = dev_get_drvdata(kdev); | 
 | 	ibmlana_priv *priv = netdev_priv(dev); | 
 |  | 
 | 	unregister_netdev(dev); | 
 | 	/*DeinitBoard(dev); */ | 
 | 	release_region(dev->base_addr, IBM_LANA_IORANGE); | 
 | 	mca_device_set_claim(mdev, 0); | 
 | 	iounmap(priv->base); | 
 | 	free_netdev(dev); | 
 | 	return 0; | 
 | } | 
 |  | 
 | /* ------------------------------------------------------------------------ | 
 |  * modularization support | 
 |  * ------------------------------------------------------------------------ */ | 
 |  | 
 | module_param_named(irq, ibmlana_irq, int, 0); | 
 | module_param_named(io, ibmlana_io, int, 0); | 
 | MODULE_PARM_DESC(irq, "IBM LAN/A IRQ number"); | 
 | MODULE_PARM_DESC(io, "IBM LAN/A I/O base address"); | 
 | MODULE_LICENSE("GPL"); | 
 |  | 
 | static struct mca_driver ibmlana_driver = { | 
 | 	.id_table = ibmlana_adapter_ids, | 
 | 	.driver = { | 
 | 		.name	= "ibmlana", | 
 | 		.bus	= &mca_bus_type, | 
 | 		.probe	= ibmlana_init_one, | 
 | 		.remove	= ibmlana_remove_one, | 
 | 	}, | 
 | }; | 
 |  | 
 | static int __init ibmlana_init_module(void) | 
 | { | 
 | 	return mca_register_driver(&ibmlana_driver); | 
 | } | 
 |  | 
 | static void __exit ibmlana_cleanup_module(void) | 
 | { | 
 | 	mca_unregister_driver(&ibmlana_driver); | 
 | } | 
 |  | 
 | module_init(ibmlana_init_module); | 
 | module_exit(ibmlana_cleanup_module); |