Google Git
Sign in
zircon-guest / third_party / linux / a37025b5c702aaf87191cd75fcc42c54454f16f5 / . / drivers / net / wireless / rt2x00 / rt2500pci.c
blob: 77e45b223d158348b958a7b5a88b84cecfc6f3a2 [file] [log] [blame]
/*
Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
<http://rt2x00.serialmonkey.com>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the
Free Software Foundation, Inc.,
59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
Module: rt2500pci
Abstract: rt2500pci device specific routines.
Supported chipsets: RT2560.
*/
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/eeprom_93cx6.h>
#include <linux/slab.h>
#include "rt2x00.h"
#include "rt2x00mmio.h"
#include "rt2x00pci.h"
#include "rt2500pci.h"
/*
* Register access.
* All access to the CSR registers will go through the methods
* rt2x00mmio_register_read and rt2x00mmio_register_write.
* BBP and RF register require indirect register access,
* and use the CSR registers BBPCSR and RFCSR to achieve this.
* These indirect registers work with busy bits,
* and we will try maximal REGISTER_BUSY_COUNT times to access
* the register while taking a REGISTER_BUSY_DELAY us delay
* between each attampt. When the busy bit is still set at that time,
* the access attempt is considered to have failed,
* and we will print an error.
*/
#define WAIT_FOR_BBP(__dev, __reg) \
rt2x00mmio_regbusy_read((__dev), BBPCSR, BBPCSR_BUSY, (__reg))
#define WAIT_FOR_RF(__dev, __reg) \
rt2x00mmio_regbusy_read((__dev), RFCSR, RFCSR_BUSY, (__reg))
static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u8 value)
{
u32 reg;
mutex_lock(&rt2x00dev->csr_mutex);
/*
* Wait until the BBP becomes available, afterwards we
* can safely write the new data into the register.
*/
if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
reg = 0;
rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg);
}
mutex_unlock(&rt2x00dev->csr_mutex);
}
static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev,
const unsigned int word, u8 *value)
{
u32 reg;
mutex_lock(&rt2x00dev->csr_mutex);
/*
* Wait until the BBP becomes available, afterwards we
* can safely write the read request into the register.
* After the data has been written, we wait until hardware
* returns the correct value, if at any time the register
* doesn't become available in time, reg will be 0xffffffff
* which means we return 0xff to the caller.
*/
if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
reg = 0;
rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
rt2x00mmio_register_write(rt2x00dev, BBPCSR, reg);
WAIT_FOR_BBP(rt2x00dev, &reg);
}
*value = rt2x00_get_field32(reg, BBPCSR_VALUE);
mutex_unlock(&rt2x00dev->csr_mutex);
}
static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev,
const unsigned int word, const u32 value)
{
u32 reg;
mutex_lock(&rt2x00dev->csr_mutex);
/*
* Wait until the RF becomes available, afterwards we
* can safely write the new data into the register.
*/
if (WAIT_FOR_RF(rt2x00dev, &reg)) {
reg = 0;
rt2x00_set_field32(&reg, RFCSR_VALUE, value);
rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
rt2x00mmio_register_write(rt2x00dev, RFCSR, reg);
rt2x00_rf_write(rt2x00dev, word, value);
}
mutex_unlock(&rt2x00dev->csr_mutex);
}
static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
{
struct rt2x00_dev *rt2x00dev = eeprom->data;
u32 reg;
rt2x00mmio_register_read(rt2x00dev, CSR21, &reg);
eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
eeprom->reg_data_clock =
!!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
eeprom->reg_chip_select =
!!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
}
static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
{
struct rt2x00_dev *rt2x00dev = eeprom->data;
u32 reg = 0;
rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
!!eeprom->reg_data_clock);
rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
!!eeprom->reg_chip_select);
rt2x00mmio_register_write(rt2x00dev, CSR21, reg);
}
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
static const struct rt2x00debug rt2500pci_rt2x00debug = {
.owner = THIS_MODULE,
.csr = {
.read = rt2x00mmio_register_read,
.write = rt2x00mmio_register_write,
.flags = RT2X00DEBUGFS_OFFSET,
.word_base = CSR_REG_BASE,
.word_size = sizeof(u32),
.word_count = CSR_REG_SIZE / sizeof(u32),
},
.eeprom = {
.read = rt2x00_eeprom_read,
.write = rt2x00_eeprom_write,
.word_base = EEPROM_BASE,
.word_size = sizeof(u16),
.word_count = EEPROM_SIZE / sizeof(u16),
},
.bbp = {
.read = rt2500pci_bbp_read,
.write = rt2500pci_bbp_write,
.word_base = BBP_BASE,
.word_size = sizeof(u8),
.word_count = BBP_SIZE / sizeof(u8),
},
.rf = {
.read = rt2x00_rf_read,
.write = rt2500pci_rf_write,
.word_base = RF_BASE,
.word_size = sizeof(u32),
.word_count = RF_SIZE / sizeof(u32),
},
};
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
rt2x00mmio_register_read(rt2x00dev, GPIOCSR, &reg);
return rt2x00_get_field32(reg, GPIOCSR_VAL0);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
enum led_brightness brightness)
{
struct rt2x00_led *led =
container_of(led_cdev, struct rt2x00_led, led_dev);
unsigned int enabled = brightness != LED_OFF;
u32 reg;
rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, &reg);
if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
rt2x00_set_field32(&reg, LEDCSR_LINK, enabled);
else if (led->type == LED_TYPE_ACTIVITY)
rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, enabled);
rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg);
}
static int rt2500pci_blink_set(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
struct rt2x00_led *led =
container_of(led_cdev, struct rt2x00_led, led_dev);
u32 reg;
rt2x00mmio_register_read(led->rt2x00dev, LEDCSR, &reg);
rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, *delay_on);
rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, *delay_off);
rt2x00mmio_register_write(led->rt2x00dev, LEDCSR, reg);
return 0;
}
static void rt2500pci_init_led(struct rt2x00_dev *rt2x00dev,
struct rt2x00_led *led,
enum led_type type)
{
led->rt2x00dev = rt2x00dev;
led->type = type;
led->led_dev.brightness_set = rt2500pci_brightness_set;
led->led_dev.blink_set = rt2500pci_blink_set;
led->flags = LED_INITIALIZED;
}
#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Configuration handlers.
*/
static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev,
const unsigned int filter_flags)
{
u32 reg;
/*
* Start configuration steps.
* Note that the version error will always be dropped
* and broadcast frames will always be accepted since
* there is no filter for it at this time.
*/
rt2x00mmio_register_read(rt2x00dev, RXCSR0, &reg);
rt2x00_set_field32(&reg, RXCSR0_DROP_CRC,
!(filter_flags & FIF_FCSFAIL));
rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL,
!(filter_flags & FIF_PLCPFAIL));
rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
!(filter_flags & FIF_CONTROL));
rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
!(filter_flags & FIF_PROMISC_IN_BSS));
rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
!(filter_flags & FIF_PROMISC_IN_BSS) &&
!rt2x00dev->intf_ap_count);
rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST,
!(filter_flags & FIF_ALLMULTI));
rt2x00_set_field32(&reg, RXCSR0_DROP_BCAST, 0);
rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg);
}
static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev,
struct rt2x00_intf *intf,
struct rt2x00intf_conf *conf,
const unsigned int flags)
{
struct data_queue *queue = rt2x00dev->bcn;
unsigned int bcn_preload;
u32 reg;
if (flags & CONFIG_UPDATE_TYPE) {
/*
* Enable beacon config
*/
bcn_preload = PREAMBLE + GET_DURATION(IEEE80211_HEADER, 20);
rt2x00mmio_register_read(rt2x00dev, BCNCSR1, &reg);
rt2x00_set_field32(&reg, BCNCSR1_PRELOAD, bcn_preload);
rt2x00_set_field32(&reg, BCNCSR1_BEACON_CWMIN, queue->cw_min);
rt2x00mmio_register_write(rt2x00dev, BCNCSR1, reg);
/*
* Enable synchronisation.
*/
rt2x00mmio_register_read(rt2x00dev, CSR14, &reg);
rt2x00_set_field32(&reg, CSR14_TSF_SYNC, conf->sync);
rt2x00mmio_register_write(rt2x00dev, CSR14, reg);
}
if (flags & CONFIG_UPDATE_MAC)
rt2x00mmio_register_multiwrite(rt2x00dev, CSR3,
conf->mac, sizeof(conf->mac));
if (flags & CONFIG_UPDATE_BSSID)
rt2x00mmio_register_multiwrite(rt2x00dev, CSR5,
conf->bssid, sizeof(conf->bssid));
}
static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_erp *erp,
u32 changed)
{
int preamble_mask;
u32 reg;
/*
* When short preamble is enabled, we should set bit 0x08
*/
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
preamble_mask = erp->short_preamble << 3;
rt2x00mmio_register_read(rt2x00dev, TXCSR1, &reg);
rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT, 0x162);
rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME, 0xa2);
rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
rt2x00mmio_register_write(rt2x00dev, TXCSR1, reg);
rt2x00mmio_register_read(rt2x00dev, ARCSR2, &reg);
rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00);
rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
rt2x00_set_field32(&reg, ARCSR2_LENGTH,
GET_DURATION(ACK_SIZE, 10));
rt2x00mmio_register_write(rt2x00dev, ARCSR2, reg);
rt2x00mmio_register_read(rt2x00dev, ARCSR3, &reg);
rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble_mask);
rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
rt2x00_set_field32(&reg, ARCSR2_LENGTH,
GET_DURATION(ACK_SIZE, 20));
rt2x00mmio_register_write(rt2x00dev, ARCSR3, reg);
rt2x00mmio_register_read(rt2x00dev, ARCSR4, &reg);
rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble_mask);
rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
rt2x00_set_field32(&reg, ARCSR2_LENGTH,
GET_DURATION(ACK_SIZE, 55));
rt2x00mmio_register_write(rt2x00dev, ARCSR4, reg);
rt2x00mmio_register_read(rt2x00dev, ARCSR5, &reg);
rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble_mask);
rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
rt2x00_set_field32(&reg, ARCSR2_LENGTH,
GET_DURATION(ACK_SIZE, 110));
rt2x00mmio_register_write(rt2x00dev, ARCSR5, reg);
}
if (changed & BSS_CHANGED_BASIC_RATES)
rt2x00mmio_register_write(rt2x00dev, ARCSR1, erp->basic_rates);
if (changed & BSS_CHANGED_ERP_SLOT) {
rt2x00mmio_register_read(rt2x00dev, CSR11, &reg);
rt2x00_set_field32(&reg, CSR11_SLOT_TIME, erp->slot_time);
rt2x00mmio_register_write(rt2x00dev, CSR11, reg);
rt2x00mmio_register_read(rt2x00dev, CSR18, &reg);
rt2x00_set_field32(&reg, CSR18_SIFS, erp->sifs);
rt2x00_set_field32(&reg, CSR18_PIFS, erp->pifs);
rt2x00mmio_register_write(rt2x00dev, CSR18, reg);
rt2x00mmio_register_read(rt2x00dev, CSR19, &reg);
rt2x00_set_field32(&reg, CSR19_DIFS, erp->difs);
rt2x00_set_field32(&reg, CSR19_EIFS, erp->eifs);
rt2x00mmio_register_write(rt2x00dev, CSR19, reg);
}
if (changed & BSS_CHANGED_BEACON_INT) {
rt2x00mmio_register_read(rt2x00dev, CSR12, &reg);
rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
erp->beacon_int * 16);
rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
erp->beacon_int * 16);
rt2x00mmio_register_write(rt2x00dev, CSR12, reg);
}
}
static void rt2500pci_config_ant(struct rt2x00_dev *rt2x00dev,
struct antenna_setup *ant)
{
u32 reg;
u8 r14;
u8 r2;
/*
* We should never come here because rt2x00lib is supposed
* to catch this and send us the correct antenna explicitely.
*/
BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
ant->tx == ANTENNA_SW_DIVERSITY);
rt2x00mmio_register_read(rt2x00dev, BBPCSR1, &reg);
rt2500pci_bbp_read(rt2x00dev, 14, &r14);
rt2500pci_bbp_read(rt2x00dev, 2, &r2);
/*
* Configure the TX antenna.
*/
switch (ant->tx) {
case ANTENNA_A:
rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
rt2x00_set_field32(&reg, BBPCSR1_CCK, 0);
rt2x00_set_field32(&reg, BBPCSR1_OFDM, 0);
break;
case ANTENNA_B:
default:
rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
break;
}
/*
* Configure the RX antenna.
*/
switch (ant->rx) {
case ANTENNA_A:
rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
break;
case ANTENNA_B:
default:
rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
break;
}
/*
* RT2525E and RT5222 need to flip TX I/Q
*/
if (rt2x00_rf(rt2x00dev, RF2525E) || rt2x00_rf(rt2x00dev, RF5222)) {
rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
/*
* RT2525E does not need RX I/Q Flip.
*/
if (rt2x00_rf(rt2x00dev, RF2525E))
rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
} else {
rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 0);
}
rt2x00mmio_register_write(rt2x00dev, BBPCSR1, reg);
rt2500pci_bbp_write(rt2x00dev, 14, r14);
rt2500pci_bbp_write(rt2x00dev, 2, r2);
}
static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
struct rf_channel *rf, const int txpower)
{
u8 r70;
/*
* Set TXpower.
*/
rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
/*
* Switch on tuning bits.
* For RT2523 devices we do not need to update the R1 register.
*/
if (!rt2x00_rf(rt2x00dev, RF2523))
rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
/*
* For RT2525 we should first set the channel to half band higher.
*/
if (rt2x00_rf(rt2x00dev, RF2525)) {
static const u32 vals[] = {
0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a,
0x00080d2e, 0x00080d3a
};
rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
rt2500pci_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
if (rf->rf4)
rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
}
rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
rt2500pci_rf_write(rt2x00dev, 2, rf->rf2);
rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
if (rf->rf4)
rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
/*
* Channel 14 requires the Japan filter bit to be set.
*/
r70 = 0x46;
rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, rf->channel == 14);
rt2500pci_bbp_write(rt2x00dev, 70, r70);
msleep(1);
/*
* Switch off tuning bits.
* For RT2523 devices we do not need to update the R1 register.
*/
if (!rt2x00_rf(rt2x00dev, RF2523)) {
rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
}
rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0);
rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
/*
* Clear false CRC during channel switch.
*/
rt2x00mmio_register_read(rt2x00dev, CNT0, &rf->rf1);
}
static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev,
const int txpower)
{
u32 rf3;
rt2x00_rf_read(rt2x00dev, 3, &rf3);
rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
rt2500pci_rf_write(rt2x00dev, 3, rf3);
}
static void rt2500pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf)
{
u32 reg;
rt2x00mmio_register_read(rt2x00dev, CSR11, &reg);
rt2x00_set_field32(&reg, CSR11_LONG_RETRY,
libconf->conf->long_frame_max_tx_count);
rt2x00_set_field32(&reg, CSR11_SHORT_RETRY,
libconf->conf->short_frame_max_tx_count);
rt2x00mmio_register_write(rt2x00dev, CSR11, reg);
}
static void rt2500pci_config_ps(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf)
{
enum dev_state state =
(libconf->conf->flags & IEEE80211_CONF_PS) ?
STATE_SLEEP : STATE_AWAKE;
u32 reg;
if (state == STATE_SLEEP) {
rt2x00mmio_register_read(rt2x00dev, CSR20, &reg);
rt2x00_set_field32(&reg, CSR20_DELAY_AFTER_TBCN,
(rt2x00dev->beacon_int - 20) * 16);
rt2x00_set_field32(&reg, CSR20_TBCN_BEFORE_WAKEUP,
libconf->conf->listen_interval - 1);
/* We must first disable autowake before it can be enabled */
rt2x00_set_field32(&reg, CSR20_AUTOWAKE, 0);
rt2x00mmio_register_write(rt2x00dev, CSR20, reg);
rt2x00_set_field32(&reg, CSR20_AUTOWAKE, 1);
rt2x00mmio_register_write(rt2x00dev, CSR20, reg);
} else {
rt2x00mmio_register_read(rt2x00dev, CSR20, &reg);
rt2x00_set_field32(&reg, CSR20_AUTOWAKE, 0);
rt2x00mmio_register_write(rt2x00dev, CSR20, reg);
}
rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
}
static void rt2500pci_config(struct rt2x00_dev *rt2x00dev,
struct rt2x00lib_conf *libconf,
const unsigned int flags)
{
if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
rt2500pci_config_channel(rt2x00dev, &libconf->rf,
libconf->conf->power_level);
if ((flags & IEEE80211_CONF_CHANGE_POWER) &&
!(flags & IEEE80211_CONF_CHANGE_CHANNEL))
rt2500pci_config_txpower(rt2x00dev,
libconf->conf->power_level);
if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
rt2500pci_config_retry_limit(rt2x00dev, libconf);
if (flags & IEEE80211_CONF_CHANGE_PS)
rt2500pci_config_ps(rt2x00dev, libconf);
}
/*
* Link tuning
*/
static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev,
struct link_qual *qual)
{
u32 reg;
/*
* Update FCS error count from register.
*/
rt2x00mmio_register_read(rt2x00dev, CNT0, &reg);
qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
/*
* Update False CCA count from register.
*/
rt2x00mmio_register_read(rt2x00dev, CNT3, &reg);
qual->false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA);
}
static inline void rt2500pci_set_vgc(struct rt2x00_dev *rt2x00dev,
struct link_qual *qual, u8 vgc_level)
{
if (qual->vgc_level_reg != vgc_level) {
rt2500pci_bbp_write(rt2x00dev, 17, vgc_level);
qual->vgc_level = vgc_level;
qual->vgc_level_reg = vgc_level;
}
}
static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
struct link_qual *qual)
{
rt2500pci_set_vgc(rt2x00dev, qual, 0x48);
}
static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev,
struct link_qual *qual, const u32 count)
{
/*
* To prevent collisions with MAC ASIC on chipsets
* up to version C the link tuning should halt after 20
* seconds while being associated.
*/
if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D &&
rt2x00dev->intf_associated && count > 20)
return;
/*
* Chipset versions C and lower should directly continue
* to the dynamic CCA tuning. Chipset version D and higher
* should go straight to dynamic CCA tuning when they
* are not associated.
*/
if (rt2x00_rev(rt2x00dev) < RT2560_VERSION_D ||
!rt2x00dev->intf_associated)
goto dynamic_cca_tune;
/*
* A too low RSSI will cause too much false CCA which will
* then corrupt the R17 tuning. To remidy this the tuning should
* be stopped (While making sure the R17 value will not exceed limits)
*/
if (qual->rssi < -80 && count > 20) {
if (qual->vgc_level_reg >= 0x41)
rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level);
return;
}
/*
* Special big-R17 for short distance
*/
if (qual->rssi >= -58) {
rt2500pci_set_vgc(rt2x00dev, qual, 0x50);
return;
}
/*
* Special mid-R17 for middle distance
*/
if (qual->rssi >= -74) {
rt2500pci_set_vgc(rt2x00dev, qual, 0x41);
return;
}
/*
* Leave short or middle distance condition, restore r17
* to the dynamic tuning range.
*/
if (qual->vgc_level_reg >= 0x41) {
rt2500pci_set_vgc(rt2x00dev, qual, qual->vgc_level);
return;
}
dynamic_cca_tune:
/*
* R17 is inside the dynamic tuning range,
* start tuning the link based on the false cca counter.
*/
if (qual->false_cca > 512 && qual->vgc_level_reg < 0x40)
rt2500pci_set_vgc(rt2x00dev, qual, ++qual->vgc_level_reg);
else if (qual->false_cca < 100 && qual->vgc_level_reg > 0x32)
rt2500pci_set_vgc(rt2x00dev, qual, --qual->vgc_level_reg);
}
/*
* Queue handlers.
*/
static void rt2500pci_start_queue(struct data_queue *queue)
{
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
u32 reg;
switch (queue->qid) {
case QID_RX:
rt2x00mmio_register_read(rt2x00dev, RXCSR0, &reg);
rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX, 0);
rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg);
break;
case QID_BEACON:
rt2x00mmio_register_read(rt2x00dev, CSR14, &reg);
rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
rt2x00_set_field32(&reg, CSR14_TBCN, 1);
rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
rt2x00mmio_register_write(rt2x00dev, CSR14, reg);
break;
default:
break;
}
}
static void rt2500pci_kick_queue(struct data_queue *queue)
{
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
u32 reg;
switch (queue->qid) {
case QID_AC_VO:
rt2x00mmio_register_read(rt2x00dev, TXCSR0, &reg);
rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO, 1);
rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg);
break;
case QID_AC_VI:
rt2x00mmio_register_read(rt2x00dev, TXCSR0, &reg);
rt2x00_set_field32(&reg, TXCSR0_KICK_TX, 1);
rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg);
break;
case QID_ATIM:
rt2x00mmio_register_read(rt2x00dev, TXCSR0, &reg);
rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM, 1);
rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg);
break;
default:
break;
}
}
static void rt2500pci_stop_queue(struct data_queue *queue)
{
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
u32 reg;
switch (queue->qid) {
case QID_AC_VO:
case QID_AC_VI:
case QID_ATIM:
rt2x00mmio_register_read(rt2x00dev, TXCSR0, &reg);
rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
rt2x00mmio_register_write(rt2x00dev, TXCSR0, reg);
break;
case QID_RX:
rt2x00mmio_register_read(rt2x00dev, RXCSR0, &reg);
rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX, 1);
rt2x00mmio_register_write(rt2x00dev, RXCSR0, reg);
break;
case QID_BEACON:
rt2x00mmio_register_read(rt2x00dev, CSR14, &reg);
rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
rt2x00_set_field32(&reg, CSR14_TBCN, 0);
rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
rt2x00mmio_register_write(rt2x00dev, CSR14, reg);
/*
* Wait for possibly running tbtt tasklets.
*/
tasklet_kill(&rt2x00dev->tbtt_tasklet);
break;
default:
break;
}
}
/*
* Initialization functions.
*/
static bool rt2500pci_get_entry_state(struct queue_entry *entry)
{
struct queue_entry_priv_mmio *entry_priv = entry->priv_data;
u32 word;
if (entry->queue->qid == QID_RX) {
rt2x00_desc_read(entry_priv->desc, 0, &word);
return rt2x00_get_field32(word, RXD_W0_OWNER_NIC);
} else {
rt2x00_desc_read(entry_priv->desc, 0, &word);
return (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
rt2x00_get_field32(word, TXD_W0_VALID));
}
}
static void rt2500pci_clear_entry(struct queue_entry *entry)
{
struct queue_entry_priv_mmio *entry_priv = entry->priv_data;
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
u32 word;
if (entry->queue->qid == QID_RX) {
rt2x00_desc_read(entry_priv->desc, 1, &word);
rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
rt2x00_desc_write(entry_priv->desc, 1, word);
rt2x00_desc_read(entry_priv->desc, 0, &word);
rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
rt2x00_desc_write(entry_priv->desc, 0, word);
} else {
rt2x00_desc_read(entry_priv->desc, 0, &word);
rt2x00_set_field32(&word, TXD_W0_VALID, 0);
rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
rt2x00_desc_write(entry_priv->desc, 0, word);
}
}
static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev)
{
struct queue_entry_priv_mmio *entry_priv;
u32 reg;
/*
* Initialize registers.
*/
rt2x00mmio_register_read(rt2x00dev, TXCSR2, &reg);
rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size);
rt2x00_set_field32(&reg, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit);
rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM, rt2x00dev->atim->limit);
rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit);
rt2x00mmio_register_write(rt2x00dev, TXCSR2, reg);
entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
rt2x00mmio_register_read(rt2x00dev, TXCSR3, &reg);
rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
entry_priv->desc_dma);
rt2x00mmio_register_write(rt2x00dev, TXCSR3, reg);
entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
rt2x00mmio_register_read(rt2x00dev, TXCSR5, &reg);
rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
entry_priv->desc_dma);
rt2x00mmio_register_write(rt2x00dev, TXCSR5, reg);
entry_priv = rt2x00dev->atim->entries[0].priv_data;
rt2x00mmio_register_read(rt2x00dev, TXCSR4, &reg);
rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
entry_priv->desc_dma);
rt2x00mmio_register_write(rt2x00dev, TXCSR4, reg);
entry_priv = rt2x00dev->bcn->entries[0].priv_data;
rt2x00mmio_register_read(rt2x00dev, TXCSR6, &reg);
rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
entry_priv->desc_dma);
rt2x00mmio_register_write(rt2x00dev, TXCSR6, reg);
rt2x00mmio_register_read(rt2x00dev, RXCSR1, &reg);
rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->limit);
rt2x00mmio_register_write(rt2x00dev, RXCSR1, reg);
entry_priv = rt2x00dev->rx->entries[0].priv_data;
rt2x00mmio_register_read(rt2x00dev, RXCSR2, &reg);
rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER,
entry_priv->desc_dma);
rt2x00mmio_register_write(rt2x00dev, RXCSR2, reg);
return 0;
}
static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
rt2x00mmio_register_write(rt2x00dev, PSCSR0, 0x00020002);
rt2x00mmio_register_write(rt2x00dev, PSCSR1, 0x00000002);
rt2x00mmio_register_write(rt2x00dev, PSCSR2, 0x00020002);
rt2x00mmio_register_write(rt2x00dev, PSCSR3, 0x00000002);
rt2x00mmio_register_read(rt2x00dev, TIMECSR, &reg);
rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
rt2x00mmio_register_write(rt2x00dev, TIMECSR, reg);
rt2x00mmio_register_read(rt2x00dev, CSR9, &reg);
rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
rt2x00dev->rx->data_size / 128);
rt2x00mmio_register_write(rt2x00dev, CSR9, reg);
/*
* Always use CWmin and CWmax set in descriptor.
*/
rt2x00mmio_register_read(rt2x00dev, CSR11, &reg);
rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
rt2x00mmio_register_write(rt2x00dev, CSR11, reg);
rt2x00mmio_register_read(rt2x00dev, CSR14, &reg);
rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
rt2x00_set_field32(&reg, CSR14_TBCN, 0);
rt2x00_set_field32(&reg, CSR14_TCFP, 0);
rt2x00_set_field32(&reg, CSR14_TATIMW, 0);
rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
rt2x00_set_field32(&reg, CSR14_CFP_COUNT_PRELOAD, 0);
rt2x00_set_field32(&reg, CSR14_TBCM_PRELOAD, 0);
rt2x00mmio_register_write(rt2x00dev, CSR14, reg);
rt2x00mmio_register_write(rt2x00dev, CNT3, 0);
rt2x00mmio_register_read(rt2x00dev, TXCSR8, &reg);
rt2x00_set_field32(&reg, TXCSR8_BBP_ID0, 10);
rt2x00_set_field32(&reg, TXCSR8_BBP_ID0_VALID, 1);
rt2x00_set_field32(&reg, TXCSR8_BBP_ID1, 11);
rt2x00_set_field32(&reg, TXCSR8_BBP_ID1_VALID, 1);
rt2x00_set_field32(&reg, TXCSR8_BBP_ID2, 13);
rt2x00_set_field32(&reg, TXCSR8_BBP_ID2_VALID, 1);
rt2x00_set_field32(&reg, TXCSR8_BBP_ID3, 12);
rt2x00_set_field32(&reg, TXCSR8_BBP_ID3_VALID, 1);
rt2x00mmio_register_write(rt2x00dev, TXCSR8, reg);
rt2x00mmio_register_read(rt2x00dev, ARTCSR0, &reg);
rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_1MBS, 112);
rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_2MBS, 56);
rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_5_5MBS, 20);
rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_11MBS, 10);
rt2x00mmio_register_write(rt2x00dev, ARTCSR0, reg);
rt2x00mmio_register_read(rt2x00dev, ARTCSR1, &reg);
rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_6MBS, 45);
rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_9MBS, 37);
rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_12MBS, 33);
rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_18MBS, 29);
rt2x00mmio_register_write(rt2x00dev, ARTCSR1, reg);
rt2x00mmio_register_read(rt2x00dev, ARTCSR2, &reg);
rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_24MBS, 29);
rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_36MBS, 25);
rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_48MBS, 25);
rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_54MBS, 25);
rt2x00mmio_register_write(rt2x00dev, ARTCSR2, reg);
rt2x00mmio_register_read(rt2x00dev, RXCSR3, &reg);
rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 47); /* CCK Signal */
rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 51); /* Rssi */
rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 42); /* OFDM Rate */
rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
rt2x00_set_field32(&reg, RXCSR3_BBP_ID3, 51); /* RSSI */
rt2x00_set_field32(&reg, RXCSR3_BBP_ID3_VALID, 1);
rt2x00mmio_register_write(rt2x00dev, RXCSR3, reg);
rt2x00mmio_register_read(rt2x00dev, PCICSR, &reg);
rt2x00_set_field32(&reg, PCICSR_BIG_ENDIAN, 0);
rt2x00_set_field32(&reg, PCICSR_RX_TRESHOLD, 0);
rt2x00_set_field32(&reg, PCICSR_TX_TRESHOLD, 3);
rt2x00_set_field32(&reg, PCICSR_BURST_LENTH, 1);
rt2x00_set_field32(&reg, PCICSR_ENABLE_CLK, 1);
rt2x00_set_field32(&reg, PCICSR_READ_MULTIPLE, 1);
rt2x00_set_field32(&reg, PCICSR_WRITE_INVALID, 1);
rt2x00mmio_register_write(rt2x00dev, PCICSR, reg);
rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
rt2x00mmio_register_write(rt2x00dev, GPIOCSR, 0x0000ff00);
rt2x00mmio_register_write(rt2x00dev, TESTCSR, 0x000000f0);
if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
return -EBUSY;
rt2x00mmio_register_write(rt2x00dev, MACCSR0, 0x00213223);
rt2x00mmio_register_write(rt2x00dev, MACCSR1, 0x00235518);
rt2x00mmio_register_read(rt2x00dev, MACCSR2, &reg);
rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
rt2x00mmio_register_write(rt2x00dev, MACCSR2, reg);
rt2x00mmio_register_read(rt2x00dev, RALINKCSR, &reg);
rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 26);
rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID0, 1);
rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 26);
rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID1, 1);
rt2x00mmio_register_write(rt2x00dev, RALINKCSR, reg);
rt2x00mmio_register_write(rt2x00dev, BBPCSR1, 0x82188200);
rt2x00mmio_register_write(rt2x00dev, TXACKCSR0, 0x00000020);
rt2x00mmio_register_read(rt2x00dev, CSR1, &reg);
rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
rt2x00mmio_register_write(rt2x00dev, CSR1, reg);
rt2x00mmio_register_read(rt2x00dev, CSR1, &reg);
rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
rt2x00mmio_register_write(rt2x00dev, CSR1, reg);
/*
* We must clear the FCS and FIFO error count.
* These registers are cleared on read,
* so we may pass a useless variable to store the value.
*/
rt2x00mmio_register_read(rt2x00dev, CNT0, &reg);
rt2x00mmio_register_read(rt2x00dev, CNT4, &reg);
return 0;
}
static int rt2500pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
{
unsigned int i;
u8 value;
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2500pci_bbp_read(rt2x00dev, 0, &value);
if ((value != 0xff) && (value != 0x00))
return 0;
udelay(REGISTER_BUSY_DELAY);
}
rt2x00_err(rt2x00dev, "BBP register access failed, aborting\n");
return -EACCES;
}
static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev)
{
unsigned int i;
u16 eeprom;
u8 reg_id;
u8 value;
if (unlikely(rt2500pci_wait_bbp_ready(rt2x00dev)))
return -EACCES;
rt2500pci_bbp_write(rt2x00dev, 3, 0x02);
rt2500pci_bbp_write(rt2x00dev, 4, 0x19);
rt2500pci_bbp_write(rt2x00dev, 14, 0x1c);
rt2500pci_bbp_write(rt2x00dev, 15, 0x30);
rt2500pci_bbp_write(rt2x00dev, 16, 0xac);
rt2500pci_bbp_write(rt2x00dev, 18, 0x18);
rt2500pci_bbp_write(rt2x00dev, 19, 0xff);
rt2500pci_bbp_write(rt2x00dev, 20, 0x1e);
rt2500pci_bbp_write(rt2x00dev, 21, 0x08);
rt2500pci_bbp_write(rt2x00dev, 22, 0x08);
rt2500pci_bbp_write(rt2x00dev, 23, 0x08);
rt2500pci_bbp_write(rt2x00dev, 24, 0x70);
rt2500pci_bbp_write(rt2x00dev, 25, 0x40);
rt2500pci_bbp_write(rt2x00dev, 26, 0x08);
rt2500pci_bbp_write(rt2x00dev, 27, 0x23);
rt2500pci_bbp_write(rt2x00dev, 30, 0x10);
rt2500pci_bbp_write(rt2x00dev, 31, 0x2b);
rt2500pci_bbp_write(rt2x00dev, 32, 0xb9);
rt2500pci_bbp_write(rt2x00dev, 34, 0x12);
rt2500pci_bbp_write(rt2x00dev, 35, 0x50);
rt2500pci_bbp_write(rt2x00dev, 39, 0xc4);
rt2500pci_bbp_write(rt2x00dev, 40, 0x02);
rt2500pci_bbp_write(rt2x00dev, 41, 0x60);
rt2500pci_bbp_write(rt2x00dev, 53, 0x10);
rt2500pci_bbp_write(rt2x00dev, 54, 0x18);
rt2500pci_bbp_write(rt2x00dev, 56, 0x08);
rt2500pci_bbp_write(rt2x00dev, 57, 0x10);
rt2500pci_bbp_write(rt2x00dev, 58, 0x08);
rt2500pci_bbp_write(rt2x00dev, 61, 0x6d);
rt2500pci_bbp_write(rt2x00dev, 62, 0x10);
for (i = 0; i < EEPROM_BBP_SIZE; i++) {
rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
if (eeprom != 0xffff && eeprom != 0x0000) {
reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
rt2500pci_bbp_write(rt2x00dev, reg_id, value);
}
}
return 0;
}
/*
* Device state switch handlers.
*/
static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
int mask = (state == STATE_RADIO_IRQ_OFF);
u32 reg;
unsigned long flags;
/*
* When interrupts are being enabled, the interrupt registers
* should clear the register to assure a clean state.
*/
if (state == STATE_RADIO_IRQ_ON) {
rt2x00mmio_register_read(rt2x00dev, CSR7, &reg);
rt2x00mmio_register_write(rt2x00dev, CSR7, reg);
}
/*
* Only toggle the interrupts bits we are going to use.
* Non-checked interrupt bits are disabled by default.
*/
spin_lock_irqsave(&rt2x00dev->irqmask_lock, flags);
rt2x00mmio_register_read(rt2x00dev, CSR8, &reg);
rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
rt2x00mmio_register_write(rt2x00dev, CSR8, reg);
spin_unlock_irqrestore(&rt2x00dev->irqmask_lock, flags);
if (state == STATE_RADIO_IRQ_OFF) {
/*
* Ensure that all tasklets are finished.
*/
tasklet_kill(&rt2x00dev->txstatus_tasklet);
tasklet_kill(&rt2x00dev->rxdone_tasklet);
tasklet_kill(&rt2x00dev->tbtt_tasklet);
}
}
static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
{
/*
* Initialize all registers.
*/
if (unlikely(rt2500pci_init_queues(rt2x00dev) ||
rt2500pci_init_registers(rt2x00dev) ||
rt2500pci_init_bbp(rt2x00dev)))
return -EIO;
return 0;
}
static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
{
/*
* Disable power
*/
rt2x00mmio_register_write(rt2x00dev, PWRCSR0, 0);
}
static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
u32 reg, reg2;
unsigned int i;
char put_to_sleep;
char bbp_state;
char rf_state;
put_to_sleep = (state != STATE_AWAKE);
rt2x00mmio_register_read(rt2x00dev, PWRCSR1, &reg);
rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg);
/*
* Device is not guaranteed to be in the requested state yet.
* We must wait until the register indicates that the
* device has entered the correct state.
*/
for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
rt2x00mmio_register_read(rt2x00dev, PWRCSR1, &reg2);
bbp_state = rt2x00_get_field32(reg2, PWRCSR1_BBP_CURR_STATE);
rf_state = rt2x00_get_field32(reg2, PWRCSR1_RF_CURR_STATE);
if (bbp_state == state && rf_state == state)
return 0;
rt2x00mmio_register_write(rt2x00dev, PWRCSR1, reg);
msleep(10);
}
return -EBUSY;
}
static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
int retval = 0;
switch (state) {
case STATE_RADIO_ON:
retval = rt2500pci_enable_radio(rt2x00dev);
break;
case STATE_RADIO_OFF:
rt2500pci_disable_radio(rt2x00dev);
break;
case STATE_RADIO_IRQ_ON:
case STATE_RADIO_IRQ_OFF:
rt2500pci_toggle_irq(rt2x00dev, state);
break;
case STATE_DEEP_SLEEP:
case STATE_SLEEP:
case STATE_STANDBY:
case STATE_AWAKE:
retval = rt2500pci_set_state(rt2x00dev, state);
break;
default:
retval = -ENOTSUPP;
break;
}
if (unlikely(retval))
rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
state, retval);
return retval;
}
/*
* TX descriptor initialization
*/
static void rt2500pci_write_tx_desc(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
struct queue_entry_priv_mmio *entry_priv = entry->priv_data;
__le32 *txd = entry_priv->desc;
u32 word;
/*
* Start writing the descriptor words.
*/
rt2x00_desc_read(txd, 1, &word);
rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, skbdesc->skb_dma);
rt2x00_desc_write(txd, 1, word);
rt2x00_desc_read(txd, 2, &word);
rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
rt2x00_set_field32(&word, TXD_W2_AIFS, entry->queue->aifs);
rt2x00_set_field32(&word, TXD_W2_CWMIN, entry->queue->cw_min);
rt2x00_set_field32(&word, TXD_W2_CWMAX, entry->queue->cw_max);
rt2x00_desc_write(txd, 2, word);
rt2x00_desc_read(txd, 3, &word);
rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->u.plcp.signal);
rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->u.plcp.service);
rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW,
txdesc->u.plcp.length_low);
rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH,
txdesc->u.plcp.length_high);
rt2x00_desc_write(txd, 3, word);
rt2x00_desc_read(txd, 10, &word);
rt2x00_set_field32(&word, TXD_W10_RTS,
test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags));
rt2x00_desc_write(txd, 10, word);
/*
* Writing TXD word 0 must the last to prevent a race condition with
* the device, whereby the device may take hold of the TXD before we
* finished updating it.
*/
rt2x00_desc_read(txd, 0, &word);
rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
rt2x00_set_field32(&word, TXD_W0_VALID, 1);
rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_ACK,
test_bit(ENTRY_TXD_ACK, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_OFDM,
(txdesc->rate_mode == RATE_MODE_OFDM));
rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1);
rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->u.plcp.ifs);
rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags));
rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length);
rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
rt2x00_desc_write(txd, 0, word);
/*
* Register descriptor details in skb frame descriptor.
*/
skbdesc->desc = txd;
skbdesc->desc_len = TXD_DESC_SIZE;
}
/*
* TX data initialization
*/
static void rt2500pci_write_beacon(struct queue_entry *entry,
struct txentry_desc *txdesc)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
u32 reg;
/*
* Disable beaconing while we are reloading the beacon data,
* otherwise we might be sending out invalid data.
*/
rt2x00mmio_register_read(rt2x00dev, CSR14, &reg);
rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
rt2x00mmio_register_write(rt2x00dev, CSR14, reg);
if (rt2x00queue_map_txskb(entry)) {
rt2x00_err(rt2x00dev, "Fail to map beacon, aborting\n");
goto out;
}
/*
* Write the TX descriptor for the beacon.
*/
rt2500pci_write_tx_desc(entry, txdesc);
/*
* Dump beacon to userspace through debugfs.
*/
rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb);
out:
/*
* Enable beaconing again.
*/
rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
rt2x00mmio_register_write(rt2x00dev, CSR14, reg);
}
/*
* RX control handlers
*/
static void rt2500pci_fill_rxdone(struct queue_entry *entry,
struct rxdone_entry_desc *rxdesc)
{
struct queue_entry_priv_mmio *entry_priv = entry->priv_data;
u32 word0;
u32 word2;
rt2x00_desc_read(entry_priv->desc, 0, &word0);
rt2x00_desc_read(entry_priv->desc, 2, &word2);
if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
/*
* Obtain the status about this packet.
* When frame was received with an OFDM bitrate,
* the signal is the PLCP value. If it was received with
* a CCK bitrate the signal is the rate in 100kbit/s.
*/
rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
entry->queue->rt2x00dev->rssi_offset;
rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
if (rt2x00_get_field32(word0, RXD_W0_OFDM))
rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
else
rxdesc->dev_flags |= RXDONE_SIGNAL_BITRATE;
if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
rxdesc->dev_flags |= RXDONE_MY_BSS;
}
/*
* Interrupt functions.
*/
static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
const enum data_queue_qid queue_idx)
{
struct data_queue *queue = rt2x00queue_get_tx_queue(rt2x00dev, queue_idx);
struct queue_entry_priv_mmio *entry_priv;
struct queue_entry *entry;
struct txdone_entry_desc txdesc;
u32 word;
while (!rt2x00queue_empty(queue)) {
entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
entry_priv = entry->priv_data;
rt2x00_desc_read(entry_priv->desc, 0, &word);
if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
!rt2x00_get_field32(word, TXD_W0_VALID))
break;
/*
* Obtain the status about this packet.
*/
txdesc.flags = 0;
switch (rt2x00_get_field32(word, TXD_W0_RESULT)) {
case 0: /* Success */
case 1: /* Success with retry */
__set_bit(TXDONE_SUCCESS, &txdesc.flags);
break;
case 2: /* Failure, excessive retries */
__set_bit(TXDONE_EXCESSIVE_RETRY, &txdesc.flags);
/* Don't break, this is a failed frame! */
default: /* Failure */
__set_bit(TXDONE_FAILURE, &txdesc.flags);
}
txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
rt2x00lib_txdone(entry, &txdesc);
}
}
static inline void rt2500pci_enable_interrupt(struct rt2x00_dev *rt2x00dev,
struct rt2x00_field32 irq_field)
{
u32 reg;
/*
* Enable a single interrupt. The interrupt mask register
* access needs locking.
*/
spin_lock_irq(&rt2x00dev->irqmask_lock);
rt2x00mmio_register_read(rt2x00dev, CSR8, &reg);
rt2x00_set_field32(&reg, irq_field, 0);
rt2x00mmio_register_write(rt2x00dev, CSR8, reg);
spin_unlock_irq(&rt2x00dev->irqmask_lock);
}
static void rt2500pci_txstatus_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
u32 reg;
/*
* Handle all tx queues.
*/
rt2500pci_txdone(rt2x00dev, QID_ATIM);
rt2500pci_txdone(rt2x00dev, QID_AC_VO);
rt2500pci_txdone(rt2x00dev, QID_AC_VI);
/*
* Enable all TXDONE interrupts again.
*/
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags)) {
spin_lock_irq(&rt2x00dev->irqmask_lock);
rt2x00mmio_register_read(rt2x00dev, CSR8, &reg);
rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, 0);
rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, 0);
rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, 0);
rt2x00mmio_register_write(rt2x00dev, CSR8, reg);
spin_unlock_irq(&rt2x00dev->irqmask_lock);
}
}
static void rt2500pci_tbtt_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
rt2x00lib_beacondone(rt2x00dev);
if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2500pci_enable_interrupt(rt2x00dev, CSR8_TBCN_EXPIRE);
}
static void rt2500pci_rxdone_tasklet(unsigned long data)
{
struct rt2x00_dev *rt2x00dev = (struct rt2x00_dev *)data;
if (rt2x00mmio_rxdone(rt2x00dev))
tasklet_schedule(&rt2x00dev->rxdone_tasklet);
else if (test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
rt2500pci_enable_interrupt(rt2x00dev, CSR8_RXDONE);
}
static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
{
struct rt2x00_dev *rt2x00dev = dev_instance;
u32 reg, mask;
/*
* Get the interrupt sources & saved to local variable.
* Write register value back to clear pending interrupts.
*/
rt2x00mmio_register_read(rt2x00dev, CSR7, &reg);
rt2x00mmio_register_write(rt2x00dev, CSR7, reg);
if (!reg)
return IRQ_NONE;
if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
return IRQ_HANDLED;
mask = reg;
/*
* Schedule tasklets for interrupt handling.
*/
if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
tasklet_hi_schedule(&rt2x00dev->tbtt_tasklet);
if (rt2x00_get_field32(reg, CSR7_RXDONE))
tasklet_schedule(&rt2x00dev->rxdone_tasklet);
if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING) ||
rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING) ||
rt2x00_get_field32(reg, CSR7_TXDONE_TXRING)) {
tasklet_schedule(&rt2x00dev->txstatus_tasklet);
/*
* Mask out all txdone interrupts.
*/
rt2x00_set_field32(&mask, CSR8_TXDONE_TXRING, 1);
rt2x00_set_field32(&mask, CSR8_TXDONE_ATIMRING, 1);
rt2x00_set_field32(&mask, CSR8_TXDONE_PRIORING, 1);
}
/*
* Disable all interrupts for which a tasklet was scheduled right now,
* the tasklet will reenable the appropriate interrupts.
*/
spin_lock(&rt2x00dev->irqmask_lock);
rt2x00mmio_register_read(rt2x00dev, CSR8, &reg);
reg |= mask;
rt2x00mmio_register_write(rt2x00dev, CSR8, reg);
spin_unlock(&rt2x00dev->irqmask_lock);
return IRQ_HANDLED;
}
/*
* Device probe functions.
*/
static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
{
struct eeprom_93cx6 eeprom;
u32 reg;
u16 word;
u8 *mac;
rt2x00mmio_register_read(rt2x00dev, CSR21, &reg);
eeprom.data = rt2x00dev;
eeprom.register_read = rt2500pci_eepromregister_read;
eeprom.register_write = rt2500pci_eepromregister_write;
eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
eeprom.reg_data_in = 0;
eeprom.reg_data_out = 0;
eeprom.reg_data_clock = 0;
eeprom.reg_chip_select = 0;
eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
EEPROM_SIZE / sizeof(u16));
/*
* Start validation of the data that has been read.
*/
mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
if (!is_valid_ether_addr(mac)) {
eth_random_addr(mac);
rt2x00_eeprom_dbg(rt2x00dev, "MAC: %pM\n", mac);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
ANTENNA_SW_DIVERSITY);
rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
ANTENNA_SW_DIVERSITY);
rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
LED_MODE_DEFAULT);
rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
rt2x00_eeprom_dbg(rt2x00dev, "Antenna: 0x%04x\n", word);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
rt2x00_eeprom_dbg(rt2x00dev, "NIC: 0x%04x\n", word);
}
rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
if (word == 0xffff) {
rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
DEFAULT_RSSI_OFFSET);
rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
rt2x00_eeprom_dbg(rt2x00dev, "Calibrate offset: 0x%04x\n",
word);
}
return 0;
}
static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
{
u32 reg;
u16 value;
u16 eeprom;
/*
* Read EEPROM word for configuration.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
/*
* Identify RF chipset.
*/
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
rt2x00mmio_register_read(rt2x00dev, CSR0, &reg);
rt2x00_set_chip(rt2x00dev, RT2560, value,
rt2x00_get_field32(reg, CSR0_REVISION));
if (!rt2x00_rf(rt2x00dev, RF2522) &&
!rt2x00_rf(rt2x00dev, RF2523) &&
!rt2x00_rf(rt2x00dev, RF2524) &&
!rt2x00_rf(rt2x00dev, RF2525) &&
!rt2x00_rf(rt2x00dev, RF2525E) &&
!rt2x00_rf(rt2x00dev, RF5222)) {
rt2x00_err(rt2x00dev, "Invalid RF chipset detected\n");
return -ENODEV;
}
/*
* Identify default antenna configuration.
*/
rt2x00dev->default_ant.tx =
rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
rt2x00dev->default_ant.rx =
rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
/*
* Store led mode, for correct led behaviour.
*/
#ifdef CONFIG_RT2X00_LIB_LEDS
value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
if (value == LED_MODE_TXRX_ACTIVITY ||
value == LED_MODE_DEFAULT ||
value == LED_MODE_ASUS)
rt2500pci_init_led(rt2x00dev, &rt2x00dev->led_qual,
LED_TYPE_ACTIVITY);
#endif /* CONFIG_RT2X00_LIB_LEDS */
/*
* Detect if this device has an hardware controlled radio.
*/
if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
__set_bit(CAPABILITY_HW_BUTTON, &rt2x00dev->cap_flags);
/*
* Check if the BBP tuning should be enabled.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
if (!rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
/*
* Read the RSSI <-> dBm offset information.
*/
rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
rt2x00dev->rssi_offset =
rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
return 0;
}
/*
* RF value list for RF2522
* Supports: 2.4 GHz
*/
static const struct rf_channel rf_vals_bg_2522[] = {
{ 1, 0x00002050, 0x000c1fda, 0x00000101, 0 },
{ 2, 0x00002050, 0x000c1fee, 0x00000101, 0 },
{ 3, 0x00002050, 0x000c2002, 0x00000101, 0 },
{ 4, 0x00002050, 0x000c2016, 0x00000101, 0 },
{ 5, 0x00002050, 0x000c202a, 0x00000101, 0 },
{ 6, 0x00002050, 0x000c203e, 0x00000101, 0 },
{ 7, 0x00002050, 0x000c2052, 0x00000101, 0 },
{ 8, 0x00002050, 0x000c2066, 0x00000101, 0 },
{ 9, 0x00002050, 0x000c207a, 0x00000101, 0 },
{ 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
{ 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
{ 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
{ 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
{ 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
};
/*
* RF value list for RF2523
* Supports: 2.4 GHz
*/
static const struct rf_channel rf_vals_bg_2523[] = {
{ 1, 0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
{ 2, 0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
{ 3, 0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
{ 4, 0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
{ 5, 0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
{ 6, 0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
{ 7, 0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
{ 8, 0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
{ 9, 0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
{ 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
{ 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
{ 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
{ 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
{ 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
};
/*
* RF value list for RF2524
* Supports: 2.4 GHz
*/
static const struct rf_channel rf_vals_bg_2524[] = {
{ 1, 0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
{ 2, 0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
{ 3, 0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
{ 4, 0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
{ 5, 0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
{ 6, 0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
{ 7, 0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
{ 8, 0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
{ 9, 0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
{ 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
{ 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
{ 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
{ 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
{ 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
};
/*
* RF value list for RF2525
* Supports: 2.4 GHz
*/
static const struct rf_channel rf_vals_bg_2525[] = {
{ 1, 0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
{ 2, 0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
{ 3, 0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
{ 4, 0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
{ 5, 0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
{ 6, 0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
{ 7, 0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
{ 8, 0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
{ 9, 0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
{ 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
{ 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
{ 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
{ 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
{ 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
};
/*
* RF value list for RF2525e
* Supports: 2.4 GHz
*/
static const struct rf_channel rf_vals_bg_2525e[] = {
{ 1, 0x00022020, 0x00081136, 0x00060111, 0x00000a0b },
{ 2, 0x00022020, 0x0008113a, 0x00060111, 0x00000a0b },
{ 3, 0x00022020, 0x0008113e, 0x00060111, 0x00000a0b },
{ 4, 0x00022020, 0x00081182, 0x00060111, 0x00000a0b },
{ 5, 0x00022020, 0x00081186, 0x00060111, 0x00000a0b },
{ 6, 0x00022020, 0x0008118a, 0x00060111, 0x00000a0b },
{ 7, 0x00022020, 0x0008118e, 0x00060111, 0x00000a0b },
{ 8, 0x00022020, 0x00081192, 0x00060111, 0x00000a0b },
{ 9, 0x00022020, 0x00081196, 0x00060111, 0x00000a0b },
{ 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b },
{ 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b },
{ 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b },
{ 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b },
{ 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b },
};
/*
* RF value list for RF5222
* Supports: 2.4 GHz & 5.2 GHz
*/
static const struct rf_channel rf_vals_5222[] = {
{ 1, 0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
{ 2, 0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
{ 3, 0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
{ 4, 0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
{ 5, 0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
{ 6, 0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
{ 7, 0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
{ 8, 0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
{ 9, 0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
{ 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
{ 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
{ 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
{ 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
{ 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
/* 802.11 UNI / HyperLan 2 */
{ 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
{ 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
{ 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
{ 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
{ 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
{ 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
{ 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
{ 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
/* 802.11 HyperLan 2 */
{ 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
{ 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
{ 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
{ 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
{ 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
{ 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
{ 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
{ 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
{ 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
{ 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
/* 802.11 UNII */
{ 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
{ 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
{ 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
{ 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
{ 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
};
static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
struct channel_info *info;
char *tx_power;
unsigned int i;
/*
* Initialize all hw fields.
*/
rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
IEEE80211_HW_SIGNAL_DBM |
IEEE80211_HW_SUPPORTS_PS |
IEEE80211_HW_PS_NULLFUNC_STACK;
SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
rt2x00_eeprom_addr(rt2x00dev,
EEPROM_MAC_ADDR_0));
/*
* Initialize hw_mode information.
*/
spec->supported_bands = SUPPORT_BAND_2GHZ;
spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
if (rt2x00_rf(rt2x00dev, RF2522)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
spec->channels = rf_vals_bg_2522;
} else if (rt2x00_rf(rt2x00dev, RF2523)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
spec->channels = rf_vals_bg_2523;
} else if (rt2x00_rf(rt2x00dev, RF2524)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
spec->channels = rf_vals_bg_2524;
} else if (rt2x00_rf(rt2x00dev, RF2525)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
spec->channels = rf_vals_bg_2525;
} else if (rt2x00_rf(rt2x00dev, RF2525E)) {
spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
spec->channels = rf_vals_bg_2525e;
} else if (rt2x00_rf(rt2x00dev, RF5222)) {
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_5222);
spec->channels = rf_vals_5222;
}
/*
* Create channel information array
*/
info = kcalloc(spec->num_channels, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
spec->channels_info = info;
tx_power = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
for (i = 0; i < 14; i++) {
info[i].max_power = MAX_TXPOWER;
info[i].default_power1 = TXPOWER_FROM_DEV(tx_power[i]);
}
if (spec->num_channels > 14) {
for (i = 14; i < spec->num_channels; i++) {
info[i].max_power = MAX_TXPOWER;
info[i].default_power1 = DEFAULT_TXPOWER;
}
}
return 0;
}
static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
{
int retval;
u32 reg;
/*
* Allocate eeprom data.
*/
retval = rt2500pci_validate_eeprom(rt2x00dev);
if (retval)
return retval;
retval = rt2500pci_init_eeprom(rt2x00dev);
if (retval)
return retval;
/*
* Enable rfkill polling by setting GPIO direction of the
* rfkill switch GPIO pin correctly.
*/
rt2x00mmio_register_read(rt2x00dev, GPIOCSR, &reg);
rt2x00_set_field32(&reg, GPIOCSR_DIR0, 1);
rt2x00mmio_register_write(rt2x00dev, GPIOCSR, reg);
/*
* Initialize hw specifications.
*/
retval = rt2500pci_probe_hw_mode(rt2x00dev);
if (retval)
return retval;
/*
* This device requires the atim queue and DMA-mapped skbs.
*/
__set_bit(REQUIRE_ATIM_QUEUE, &rt2x00dev->cap_flags);
__set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
__set_bit(REQUIRE_SW_SEQNO, &rt2x00dev->cap_flags);
/*
* Set the rssi offset.
*/
rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
return 0;
}
/*
* IEEE80211 stack callback functions.
*/
static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
u64 tsf;
u32 reg;
rt2x00mmio_register_read(rt2x00dev, CSR17, &reg);
tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
rt2x00mmio_register_read(rt2x00dev, CSR16, &reg);
tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
return tsf;
}
static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
{
struct rt2x00_dev *rt2x00dev = hw->priv;
u32 reg;
rt2x00mmio_register_read(rt2x00dev, CSR15, &reg);
return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
}
static const struct ieee80211_ops rt2500pci_mac80211_ops = {
.tx = rt2x00mac_tx,
.start = rt2x00mac_start,
.stop = rt2x00mac_stop,
.add_interface = rt2x00mac_add_interface,
.remove_interface = rt2x00mac_remove_interface,
.config = rt2x00mac_config,
.configure_filter = rt2x00mac_configure_filter,
.sw_scan_start = rt2x00mac_sw_scan_start,
.sw_scan_complete = rt2x00mac_sw_scan_complete,
.get_stats = rt2x00mac_get_stats,
.bss_info_changed = rt2x00mac_bss_info_changed,
.conf_tx = rt2x00mac_conf_tx,
.get_tsf = rt2500pci_get_tsf,
.tx_last_beacon = rt2500pci_tx_last_beacon,
.rfkill_poll = rt2x00mac_rfkill_poll,
.flush = rt2x00mac_flush,
.set_antenna = rt2x00mac_set_antenna,
.get_antenna = rt2x00mac_get_antenna,
.get_ringparam = rt2x00mac_get_ringparam,
.tx_frames_pending = rt2x00mac_tx_frames_pending,
};
static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
.irq_handler = rt2500pci_interrupt,
.txstatus_tasklet = rt2500pci_txstatus_tasklet,
.tbtt_tasklet = rt2500pci_tbtt_tasklet,
.rxdone_tasklet = rt2500pci_rxdone_tasklet,
.probe_hw = rt2500pci_probe_hw,
.initialize = rt2x00mmio_initialize,
.uninitialize = rt2x00mmio_uninitialize,
.get_entry_state = rt2500pci_get_entry_state,
.clear_entry = rt2500pci_clear_entry,
.set_device_state = rt2500pci_set_device_state,
.rfkill_poll = rt2500pci_rfkill_poll,
.link_stats = rt2500pci_link_stats,
.reset_tuner = rt2500pci_reset_tuner,
.link_tuner = rt2500pci_link_tuner,
.start_queue = rt2500pci_start_queue,
.kick_queue = rt2500pci_kick_queue,
.stop_queue = rt2500pci_stop_queue,
.flush_queue = rt2x00mmio_flush_queue,
.write_tx_desc = rt2500pci_write_tx_desc,
.write_beacon = rt2500pci_write_beacon,
.fill_rxdone = rt2500pci_fill_rxdone,
.config_filter = rt2500pci_config_filter,
.config_intf = rt2500pci_config_intf,
.config_erp = rt2500pci_config_erp,
.config_ant = rt2500pci_config_ant,
.config = rt2500pci_config,
};
static const struct data_queue_desc rt2500pci_queue_rx = {
.entry_num = 32,
.data_size = DATA_FRAME_SIZE,
.desc_size = RXD_DESC_SIZE,
.priv_size = sizeof(struct queue_entry_priv_mmio),
};
static const struct data_queue_desc rt2500pci_queue_tx = {
.entry_num = 32,
.data_size = DATA_FRAME_SIZE,
.desc_size = TXD_DESC_SIZE,
.priv_size = sizeof(struct queue_entry_priv_mmio),
};
static const struct data_queue_desc rt2500pci_queue_bcn = {
.entry_num = 1,
.data_size = MGMT_FRAME_SIZE,
.desc_size = TXD_DESC_SIZE,
.priv_size = sizeof(struct queue_entry_priv_mmio),
};
static const struct data_queue_desc rt2500pci_queue_atim = {
.entry_num = 8,
.data_size = DATA_FRAME_SIZE,
.desc_size = TXD_DESC_SIZE,
.priv_size = sizeof(struct queue_entry_priv_mmio),
};
static const struct rt2x00_ops rt2500pci_ops = {
.name = KBUILD_MODNAME,
.max_ap_intf = 1,
.eeprom_size = EEPROM_SIZE,
.rf_size = RF_SIZE,
.tx_queues = NUM_TX_QUEUES,
.extra_tx_headroom = 0,
.rx = &rt2500pci_queue_rx,
.tx = &rt2500pci_queue_tx,
.bcn = &rt2500pci_queue_bcn,
.atim = &rt2500pci_queue_atim,
.lib = &rt2500pci_rt2x00_ops,
.hw = &rt2500pci_mac80211_ops,
#ifdef CONFIG_RT2X00_LIB_DEBUGFS
.debugfs = &rt2500pci_rt2x00debug,
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
/*
* RT2500pci module information.
*/
static DEFINE_PCI_DEVICE_TABLE(rt2500pci_device_table) = {
{ PCI_DEVICE(0x1814, 0x0201) },
{ 0, }
};
MODULE_AUTHOR(DRV_PROJECT);
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver.");
MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
MODULE_LICENSE("GPL");
static int rt2500pci_probe(struct pci_dev *pci_dev,
const struct pci_device_id *id)
{
return rt2x00pci_probe(pci_dev, &rt2500pci_ops);
}
static struct pci_driver rt2500pci_driver = {
.name = KBUILD_MODNAME,
.id_table = rt2500pci_device_table,
.probe = rt2500pci_probe,
.remove = rt2x00pci_remove,
.suspend = rt2x00pci_suspend,
.resume = rt2x00pci_resume,
};
module_pci_driver(rt2500pci_driver);