|  | /* | 
|  | * Copyright (c) 2009 Peter Holik | 
|  | * | 
|  | * Intellon usb PLC (Powerline Communications) usb net driver | 
|  | * | 
|  | * http://www.tandel.be/downloads/INT51X1_Datasheet.pdf | 
|  | * | 
|  | * Based on the work of Jan 'RedBully' Seiffert | 
|  | */ | 
|  |  | 
|  | /* | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License as published by | 
|  | * the Free Software Foundation; either version 2 of the License, or. | 
|  | * (at your option) any later version. | 
|  | * | 
|  | * This program is distributed in the hope that it will be useful, | 
|  | * but WITHOUT ANY WARRANTY; without even the implied warranty of | 
|  | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the | 
|  | * GNU General Public License for more details. | 
|  | * | 
|  | * You should have received a copy of the GNU General Public License | 
|  | * along with this program; if not, see <http://www.gnu.org/licenses/>. | 
|  | */ | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/ctype.h> | 
|  | #include <linux/netdevice.h> | 
|  | #include <linux/etherdevice.h> | 
|  | #include <linux/ethtool.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/mii.h> | 
|  | #include <linux/usb.h> | 
|  | #include <linux/usb/usbnet.h> | 
|  |  | 
|  | #define INT51X1_VENDOR_ID	0x09e1 | 
|  | #define INT51X1_PRODUCT_ID	0x5121 | 
|  |  | 
|  | #define INT51X1_HEADER_SIZE	2	/* 2 byte header */ | 
|  |  | 
|  | #define PACKET_TYPE_PROMISCUOUS		(1 << 0) | 
|  | #define PACKET_TYPE_ALL_MULTICAST	(1 << 1) /* no filter */ | 
|  | #define PACKET_TYPE_DIRECTED		(1 << 2) | 
|  | #define PACKET_TYPE_BROADCAST		(1 << 3) | 
|  | #define PACKET_TYPE_MULTICAST		(1 << 4) /* filtered */ | 
|  |  | 
|  | #define SET_ETHERNET_PACKET_FILTER	0x43 | 
|  |  | 
|  | static int int51x1_rx_fixup(struct usbnet *dev, struct sk_buff *skb) | 
|  | { | 
|  | int len; | 
|  |  | 
|  | if (!(pskb_may_pull(skb, INT51X1_HEADER_SIZE))) { | 
|  | netdev_err(dev->net, "unexpected tiny rx frame\n"); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | len = le16_to_cpu(*(__le16 *)&skb->data[skb->len - 2]); | 
|  |  | 
|  | skb_trim(skb, len); | 
|  |  | 
|  | return 1; | 
|  | } | 
|  |  | 
|  | static struct sk_buff *int51x1_tx_fixup(struct usbnet *dev, | 
|  | struct sk_buff *skb, gfp_t flags) | 
|  | { | 
|  | int pack_len = skb->len; | 
|  | int pack_with_header_len = pack_len + INT51X1_HEADER_SIZE; | 
|  | int headroom = skb_headroom(skb); | 
|  | int tailroom = skb_tailroom(skb); | 
|  | int need_tail = 0; | 
|  | __le16 *len; | 
|  |  | 
|  | /* if packet and our header is smaler than 64 pad to 64 (+ ZLP) */ | 
|  | if ((pack_with_header_len) < dev->maxpacket) | 
|  | need_tail = dev->maxpacket - pack_with_header_len + 1; | 
|  | /* | 
|  | * usbnet would send a ZLP if packetlength mod urbsize == 0 for us, | 
|  | * but we need to know ourself, because this would add to the length | 
|  | * we send down to the device... | 
|  | */ | 
|  | else if (!(pack_with_header_len % dev->maxpacket)) | 
|  | need_tail = 1; | 
|  |  | 
|  | if (!skb_cloned(skb) && | 
|  | (headroom + tailroom >= need_tail + INT51X1_HEADER_SIZE)) { | 
|  | if (headroom < INT51X1_HEADER_SIZE || tailroom < need_tail) { | 
|  | skb->data = memmove(skb->head + INT51X1_HEADER_SIZE, | 
|  | skb->data, skb->len); | 
|  | skb_set_tail_pointer(skb, skb->len); | 
|  | } | 
|  | } else { | 
|  | struct sk_buff *skb2; | 
|  |  | 
|  | skb2 = skb_copy_expand(skb, | 
|  | INT51X1_HEADER_SIZE, | 
|  | need_tail, | 
|  | flags); | 
|  | dev_kfree_skb_any(skb); | 
|  | if (!skb2) | 
|  | return NULL; | 
|  | skb = skb2; | 
|  | } | 
|  |  | 
|  | pack_len += need_tail; | 
|  | pack_len &= 0x07ff; | 
|  |  | 
|  | len = (__le16 *) __skb_push(skb, INT51X1_HEADER_SIZE); | 
|  | *len = cpu_to_le16(pack_len); | 
|  |  | 
|  | if(need_tail) | 
|  | memset(__skb_put(skb, need_tail), 0, need_tail); | 
|  |  | 
|  | return skb; | 
|  | } | 
|  |  | 
|  | static void int51x1_set_multicast(struct net_device *netdev) | 
|  | { | 
|  | struct usbnet *dev = netdev_priv(netdev); | 
|  | u16 filter = PACKET_TYPE_DIRECTED | PACKET_TYPE_BROADCAST; | 
|  |  | 
|  | if (netdev->flags & IFF_PROMISC) { | 
|  | /* do not expect to see traffic of other PLCs */ | 
|  | filter |= PACKET_TYPE_PROMISCUOUS; | 
|  | netdev_info(dev->net, "promiscuous mode enabled\n"); | 
|  | } else if (!netdev_mc_empty(netdev) || | 
|  | (netdev->flags & IFF_ALLMULTI)) { | 
|  | filter |= PACKET_TYPE_ALL_MULTICAST; | 
|  | netdev_dbg(dev->net, "receive all multicast enabled\n"); | 
|  | } else { | 
|  | /* ~PROMISCUOUS, ~MULTICAST */ | 
|  | netdev_dbg(dev->net, "receive own packets only\n"); | 
|  | } | 
|  |  | 
|  | usbnet_write_cmd_async(dev, SET_ETHERNET_PACKET_FILTER, | 
|  | USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, | 
|  | filter, 0, NULL, 0); | 
|  | } | 
|  |  | 
|  | static const struct net_device_ops int51x1_netdev_ops = { | 
|  | .ndo_open		= usbnet_open, | 
|  | .ndo_stop		= usbnet_stop, | 
|  | .ndo_start_xmit		= usbnet_start_xmit, | 
|  | .ndo_tx_timeout		= usbnet_tx_timeout, | 
|  | .ndo_change_mtu		= usbnet_change_mtu, | 
|  | .ndo_set_mac_address	= eth_mac_addr, | 
|  | .ndo_validate_addr	= eth_validate_addr, | 
|  | .ndo_set_rx_mode	= int51x1_set_multicast, | 
|  | }; | 
|  |  | 
|  | static int int51x1_bind(struct usbnet *dev, struct usb_interface *intf) | 
|  | { | 
|  | int status = usbnet_get_ethernet_addr(dev, 3); | 
|  |  | 
|  | if (status) | 
|  | return status; | 
|  |  | 
|  | dev->net->hard_header_len += INT51X1_HEADER_SIZE; | 
|  | dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; | 
|  | dev->net->netdev_ops = &int51x1_netdev_ops; | 
|  |  | 
|  | return usbnet_get_endpoints(dev, intf); | 
|  | } | 
|  |  | 
|  | static const struct driver_info int51x1_info = { | 
|  | .description = "Intellon usb powerline adapter", | 
|  | .bind        = int51x1_bind, | 
|  | .rx_fixup    = int51x1_rx_fixup, | 
|  | .tx_fixup    = int51x1_tx_fixup, | 
|  | .in          = 1, | 
|  | .out         = 2, | 
|  | .flags       = FLAG_ETHER, | 
|  | }; | 
|  |  | 
|  | static const struct usb_device_id products[] = { | 
|  | { | 
|  | USB_DEVICE(INT51X1_VENDOR_ID, INT51X1_PRODUCT_ID), | 
|  | .driver_info = (unsigned long) &int51x1_info, | 
|  | }, | 
|  | {}, | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(usb, products); | 
|  |  | 
|  | static struct usb_driver int51x1_driver = { | 
|  | .name       = "int51x1", | 
|  | .id_table   = products, | 
|  | .probe      = usbnet_probe, | 
|  | .disconnect = usbnet_disconnect, | 
|  | .suspend    = usbnet_suspend, | 
|  | .resume     = usbnet_resume, | 
|  | .disable_hub_initiated_lpm = 1, | 
|  | }; | 
|  |  | 
|  | module_usb_driver(int51x1_driver); | 
|  |  | 
|  | MODULE_AUTHOR("Peter Holik"); | 
|  | MODULE_DESCRIPTION("Intellon usb powerline adapter"); | 
|  | MODULE_LICENSE("GPL"); |