| /* |
| * Copyright 2011, Netlogic Microsystems Inc. |
| * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/ioport.h> |
| #include <linux/delay.h> |
| #include <linux/errno.h> |
| #include <linux/i2c.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/of_device.h> |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| #include <linux/wait.h> |
| |
| /* XLR I2C REGISTERS */ |
| #define XLR_I2C_CFG 0x00 |
| #define XLR_I2C_CLKDIV 0x01 |
| #define XLR_I2C_DEVADDR 0x02 |
| #define XLR_I2C_ADDR 0x03 |
| #define XLR_I2C_DATAOUT 0x04 |
| #define XLR_I2C_DATAIN 0x05 |
| #define XLR_I2C_STATUS 0x06 |
| #define XLR_I2C_STARTXFR 0x07 |
| #define XLR_I2C_BYTECNT 0x08 |
| #define XLR_I2C_HDSTATIM 0x09 |
| |
| /* Sigma Designs additional registers */ |
| #define XLR_I2C_INT_EN 0x09 |
| #define XLR_I2C_INT_STAT 0x0a |
| |
| /* XLR I2C REGISTERS FLAGS */ |
| #define XLR_I2C_BUS_BUSY 0x01 |
| #define XLR_I2C_SDOEMPTY 0x02 |
| #define XLR_I2C_RXRDY 0x04 |
| #define XLR_I2C_ACK_ERR 0x08 |
| #define XLR_I2C_ARB_STARTERR 0x30 |
| |
| /* Register Values */ |
| #define XLR_I2C_CFG_ADDR 0xF8 |
| #define XLR_I2C_CFG_NOADDR 0xFA |
| #define XLR_I2C_STARTXFR_ND 0x02 /* No Data */ |
| #define XLR_I2C_STARTXFR_RD 0x01 /* Read */ |
| #define XLR_I2C_STARTXFR_WR 0x00 /* Write */ |
| |
| #define XLR_I2C_TIMEOUT 10 /* timeout per byte in msec */ |
| |
| /* |
| * On XLR/XLS, we need to use __raw_ IO to read the I2C registers |
| * because they are in the big-endian MMIO area on the SoC. |
| * |
| * The readl/writel implementation on XLR/XLS byteswaps, because |
| * those are for its little-endian PCI space (see arch/mips/Kconfig). |
| */ |
| static inline void xlr_i2c_wreg(u32 __iomem *base, unsigned int reg, u32 val) |
| { |
| __raw_writel(val, base + reg); |
| } |
| |
| static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg) |
| { |
| return __raw_readl(base + reg); |
| } |
| |
| #define XLR_I2C_FLAG_IRQ 1 |
| |
| struct xlr_i2c_config { |
| u32 flags; /* optional feature support */ |
| u32 status_busy; /* value of STATUS[0] when busy */ |
| u32 cfg_extra; /* extra CFG bits to set */ |
| }; |
| |
| struct xlr_i2c_private { |
| struct i2c_adapter adap; |
| u32 __iomem *iobase; |
| int irq; |
| int pos; |
| struct i2c_msg *msg; |
| const struct xlr_i2c_config *cfg; |
| wait_queue_head_t wait; |
| struct clk *clk; |
| }; |
| |
| static int xlr_i2c_busy(struct xlr_i2c_private *priv, u32 status) |
| { |
| return (status & XLR_I2C_BUS_BUSY) == priv->cfg->status_busy; |
| } |
| |
| static int xlr_i2c_idle(struct xlr_i2c_private *priv) |
| { |
| return !xlr_i2c_busy(priv, xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS)); |
| } |
| |
| static int xlr_i2c_wait(struct xlr_i2c_private *priv, unsigned long timeout) |
| { |
| int status; |
| int t; |
| |
| t = wait_event_timeout(priv->wait, xlr_i2c_idle(priv), |
| msecs_to_jiffies(timeout)); |
| if (!t) |
| return -ETIMEDOUT; |
| |
| status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); |
| |
| return status & XLR_I2C_ACK_ERR ? -EIO : 0; |
| } |
| |
| static void xlr_i2c_tx_irq(struct xlr_i2c_private *priv, u32 status) |
| { |
| struct i2c_msg *msg = priv->msg; |
| |
| if (status & XLR_I2C_SDOEMPTY) |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, |
| msg->buf[priv->pos++]); |
| } |
| |
| static void xlr_i2c_rx_irq(struct xlr_i2c_private *priv, u32 status) |
| { |
| struct i2c_msg *msg = priv->msg; |
| |
| if (status & XLR_I2C_RXRDY) |
| msg->buf[priv->pos++] = |
| xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN); |
| } |
| |
| static irqreturn_t xlr_i2c_irq(int irq, void *dev_id) |
| { |
| struct xlr_i2c_private *priv = dev_id; |
| struct i2c_msg *msg = priv->msg; |
| u32 int_stat, status; |
| |
| int_stat = xlr_i2c_rdreg(priv->iobase, XLR_I2C_INT_STAT); |
| if (!int_stat) |
| return IRQ_NONE; |
| |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, int_stat); |
| |
| if (!msg) |
| return IRQ_HANDLED; |
| |
| status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); |
| |
| if (priv->pos < msg->len) { |
| if (msg->flags & I2C_M_RD) |
| xlr_i2c_rx_irq(priv, status); |
| else |
| xlr_i2c_tx_irq(priv, status); |
| } |
| |
| if (!xlr_i2c_busy(priv, status)) |
| wake_up(&priv->wait); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len, |
| u8 *buf, u16 addr) |
| { |
| struct i2c_adapter *adap = &priv->adap; |
| unsigned long timeout, stoptime, checktime; |
| u32 i2c_status; |
| int pos, timedout; |
| u8 offset; |
| u32 xfer; |
| |
| offset = buf[0]; |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset); |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, |
| XLR_I2C_CFG_ADDR | priv->cfg->cfg_extra); |
| |
| timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); |
| stoptime = jiffies + timeout; |
| timedout = 0; |
| |
| if (len == 1) { |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1); |
| xfer = XLR_I2C_STARTXFR_ND; |
| pos = 1; |
| } else { |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 2); |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[1]); |
| xfer = XLR_I2C_STARTXFR_WR; |
| pos = 2; |
| } |
| |
| priv->pos = pos; |
| |
| retry: |
| /* retry can only happen on the first byte */ |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, xfer); |
| |
| if (priv->irq > 0) |
| return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len); |
| |
| while (!timedout) { |
| checktime = jiffies; |
| i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); |
| |
| if ((i2c_status & XLR_I2C_SDOEMPTY) && pos < len) { |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos++]); |
| |
| /* reset timeout on successful xmit */ |
| stoptime = jiffies + timeout; |
| } |
| timedout = time_after(checktime, stoptime); |
| |
| if (i2c_status & XLR_I2C_ARB_STARTERR) { |
| if (timedout) |
| break; |
| goto retry; |
| } |
| |
| if (i2c_status & XLR_I2C_ACK_ERR) |
| return -EIO; |
| |
| if (!xlr_i2c_busy(priv, i2c_status) && pos >= len) |
| return 0; |
| } |
| dev_err(&adap->dev, "I2C transmit timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr) |
| { |
| struct i2c_adapter *adap = &priv->adap; |
| u32 i2c_status; |
| unsigned long timeout, stoptime, checktime; |
| int nbytes, timedout; |
| |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, |
| XLR_I2C_CFG_NOADDR | priv->cfg->cfg_extra); |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1); |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); |
| |
| priv->pos = 0; |
| |
| timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); |
| stoptime = jiffies + timeout; |
| timedout = 0; |
| nbytes = 0; |
| retry: |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD); |
| |
| if (priv->irq > 0) |
| return xlr_i2c_wait(priv, XLR_I2C_TIMEOUT * len); |
| |
| while (!timedout) { |
| checktime = jiffies; |
| i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); |
| if (i2c_status & XLR_I2C_RXRDY) { |
| if (nbytes >= len) |
| return -EIO; /* should not happen */ |
| |
| buf[nbytes++] = |
| xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN); |
| |
| /* reset timeout on successful read */ |
| stoptime = jiffies + timeout; |
| } |
| |
| timedout = time_after(checktime, stoptime); |
| if (i2c_status & XLR_I2C_ARB_STARTERR) { |
| if (timedout) |
| break; |
| goto retry; |
| } |
| |
| if (i2c_status & XLR_I2C_ACK_ERR) |
| return -EIO; |
| |
| if (!xlr_i2c_busy(priv, i2c_status)) |
| return 0; |
| } |
| |
| dev_err(&adap->dev, "I2C receive timeout\n"); |
| return -ETIMEDOUT; |
| } |
| |
| static int xlr_i2c_xfer(struct i2c_adapter *adap, |
| struct i2c_msg *msgs, int num) |
| { |
| struct i2c_msg *msg; |
| int i; |
| int ret = 0; |
| struct xlr_i2c_private *priv = i2c_get_adapdata(adap); |
| |
| ret = clk_enable(priv->clk); |
| if (ret) |
| return ret; |
| |
| if (priv->irq) |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0xf); |
| |
| |
| for (i = 0; ret == 0 && i < num; i++) { |
| msg = &msgs[i]; |
| priv->msg = msg; |
| if (msg->flags & I2C_M_RD) |
| ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0], |
| msg->addr); |
| else |
| ret = xlr_i2c_tx(priv, msg->len, &msg->buf[0], |
| msg->addr); |
| } |
| |
| if (priv->irq) |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0); |
| |
| clk_disable(priv->clk); |
| priv->msg = NULL; |
| |
| return (ret != 0) ? ret : num; |
| } |
| |
| static u32 xlr_func(struct i2c_adapter *adap) |
| { |
| /* Emulate SMBUS over I2C */ |
| return (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK) | I2C_FUNC_I2C; |
| } |
| |
| static const struct i2c_algorithm xlr_i2c_algo = { |
| .master_xfer = xlr_i2c_xfer, |
| .functionality = xlr_func, |
| }; |
| |
| static const struct i2c_adapter_quirks xlr_i2c_quirks = { |
| .flags = I2C_AQ_NO_ZERO_LEN, |
| }; |
| |
| static const struct xlr_i2c_config xlr_i2c_config_default = { |
| .status_busy = XLR_I2C_BUS_BUSY, |
| .cfg_extra = 0, |
| }; |
| |
| static const struct xlr_i2c_config xlr_i2c_config_tangox = { |
| .flags = XLR_I2C_FLAG_IRQ, |
| .status_busy = 0, |
| .cfg_extra = 1 << 8, |
| }; |
| |
| static const struct of_device_id xlr_i2c_dt_ids[] = { |
| { |
| .compatible = "sigma,smp8642-i2c", |
| .data = &xlr_i2c_config_tangox, |
| }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, xlr_i2c_dt_ids); |
| |
| static int xlr_i2c_probe(struct platform_device *pdev) |
| { |
| const struct of_device_id *match; |
| struct xlr_i2c_private *priv; |
| struct resource *res; |
| struct clk *clk; |
| unsigned long clk_rate; |
| unsigned long clk_div; |
| u32 busfreq; |
| int irq; |
| int ret; |
| |
| priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| match = of_match_device(xlr_i2c_dt_ids, &pdev->dev); |
| if (match) |
| priv->cfg = match->data; |
| else |
| priv->cfg = &xlr_i2c_config_default; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| priv->iobase = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(priv->iobase)) |
| return PTR_ERR(priv->iobase); |
| |
| irq = platform_get_irq(pdev, 0); |
| |
| if (irq > 0 && (priv->cfg->flags & XLR_I2C_FLAG_IRQ)) { |
| priv->irq = irq; |
| |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_EN, 0); |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_INT_STAT, 0xf); |
| |
| ret = devm_request_irq(&pdev->dev, priv->irq, xlr_i2c_irq, |
| IRQF_SHARED, dev_name(&pdev->dev), |
| priv); |
| if (ret) |
| return ret; |
| |
| init_waitqueue_head(&priv->wait); |
| } |
| |
| if (of_property_read_u32(pdev->dev.of_node, "clock-frequency", |
| &busfreq)) |
| busfreq = 100000; |
| |
| clk = devm_clk_get(&pdev->dev, NULL); |
| if (!IS_ERR(clk)) { |
| ret = clk_prepare_enable(clk); |
| if (ret) |
| return ret; |
| |
| clk_rate = clk_get_rate(clk); |
| clk_div = DIV_ROUND_UP(clk_rate, 2 * busfreq); |
| xlr_i2c_wreg(priv->iobase, XLR_I2C_CLKDIV, clk_div); |
| |
| clk_disable(clk); |
| priv->clk = clk; |
| } |
| |
| priv->adap.dev.parent = &pdev->dev; |
| priv->adap.dev.of_node = pdev->dev.of_node; |
| priv->adap.owner = THIS_MODULE; |
| priv->adap.algo_data = priv; |
| priv->adap.algo = &xlr_i2c_algo; |
| priv->adap.quirks = &xlr_i2c_quirks; |
| priv->adap.nr = pdev->id; |
| priv->adap.class = I2C_CLASS_HWMON; |
| snprintf(priv->adap.name, sizeof(priv->adap.name), "xlr-i2c"); |
| |
| i2c_set_adapdata(&priv->adap, priv); |
| ret = i2c_add_numbered_adapter(&priv->adap); |
| if (ret < 0) |
| goto err_unprepare_clk; |
| |
| platform_set_drvdata(pdev, priv); |
| dev_info(&priv->adap.dev, "Added I2C Bus.\n"); |
| return 0; |
| |
| err_unprepare_clk: |
| clk_unprepare(clk); |
| return ret; |
| } |
| |
| static int xlr_i2c_remove(struct platform_device *pdev) |
| { |
| struct xlr_i2c_private *priv; |
| |
| priv = platform_get_drvdata(pdev); |
| i2c_del_adapter(&priv->adap); |
| clk_unprepare(priv->clk); |
| |
| return 0; |
| } |
| |
| static struct platform_driver xlr_i2c_driver = { |
| .probe = xlr_i2c_probe, |
| .remove = xlr_i2c_remove, |
| .driver = { |
| .name = "xlr-i2cbus", |
| .of_match_table = xlr_i2c_dt_ids, |
| }, |
| }; |
| |
| module_platform_driver(xlr_i2c_driver); |
| |
| MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@netlogicmicro.com>"); |
| MODULE_DESCRIPTION("XLR/XLS SoC I2C Controller driver"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:xlr-i2cbus"); |