| /* |
| * linux/include/asm-sh/microdev.h |
| * |
| * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) |
| * |
| * Definitions for the SuperH SH4-202 MicroDev board. |
| * |
| * May be copied or modified under the terms of the GNU General Public |
| * License. See linux/COPYING for more information. |
| */ |
| #ifndef __ASM_SH_MICRODEV_H |
| #define __ASM_SH_MICRODEV_H |
| |
| extern void init_microdev_irq(void); |
| extern void microdev_print_fpga_intc_status(void); |
| |
| /* |
| * The following are useful macros for manipulating the interrupt |
| * controller (INTC) on the CPU-board FPGA. should be noted that there |
| * is an INTC on the FPGA, and a separate INTC on the SH4-202 core - |
| * these are two different things, both of which need to be prorammed to |
| * correctly route - unfortunately, they have the same name and |
| * abbreviations! |
| */ |
| #define MICRODEV_FPGA_INTC_BASE 0xa6110000ul /* INTC base address on CPU-board FPGA */ |
| #define MICRODEV_FPGA_INTENB_REG (MICRODEV_FPGA_INTC_BASE+0ul) /* Interrupt Enable Register on INTC on CPU-board FPGA */ |
| #define MICRODEV_FPGA_INTDSB_REG (MICRODEV_FPGA_INTC_BASE+8ul) /* Interrupt Disable Register on INTC on CPU-board FPGA */ |
| #define MICRODEV_FPGA_INTC_MASK(n) (1ul<<(n)) /* Interrupt mask to enable/disable INTC in CPU-board FPGA */ |
| #define MICRODEV_FPGA_INTPRI_REG(n) (MICRODEV_FPGA_INTC_BASE+0x10+((n)/8)*8)/* Interrupt Priority Register on INTC on CPU-board FPGA */ |
| #define MICRODEV_FPGA_INTPRI_LEVEL(n,x) ((x)<<(((n)%8)*4)) /* MICRODEV_FPGA_INTPRI_LEVEL(int_number, int_level) */ |
| #define MICRODEV_FPGA_INTPRI_MASK(n) (MICRODEV_FPGA_INTPRI_LEVEL((n),0xful)) /* Interrupt Priority Mask on INTC on CPU-board FPGA */ |
| #define MICRODEV_FPGA_INTSRC_REG (MICRODEV_FPGA_INTC_BASE+0x30ul) /* Interrupt Source Register on INTC on CPU-board FPGA */ |
| #define MICRODEV_FPGA_INTREQ_REG (MICRODEV_FPGA_INTC_BASE+0x38ul) /* Interrupt Request Register on INTC on CPU-board FPGA */ |
| |
| |
| /* |
| * The following are the IRQ numbers for the Linux Kernel for external |
| * interrupts. i.e. the numbers seen by 'cat /proc/interrupt'. |
| */ |
| #define MICRODEV_LINUX_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ |
| #define MICRODEV_LINUX_IRQ_SERIAL1 2 /* SuperIO Serial #1 */ |
| #define MICRODEV_LINUX_IRQ_ETHERNET 3 /* on-board Ethnernet */ |
| #define MICRODEV_LINUX_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ |
| #define MICRODEV_LINUX_IRQ_USB_HC 7 /* on-board USB HC */ |
| #define MICRODEV_LINUX_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ |
| #define MICRODEV_LINUX_IRQ_IDE2 13 /* SuperIO IDE #2 */ |
| #define MICRODEV_LINUX_IRQ_IDE1 14 /* SuperIO IDE #1 */ |
| |
| /* |
| * The following are the IRQ numbers for the INTC on the FPGA for |
| * external interrupts. i.e. the bits in the INTC registers in the |
| * FPGA. |
| */ |
| #define MICRODEV_FPGA_IRQ_KEYBOARD 1 /* SuperIO Keyboard */ |
| #define MICRODEV_FPGA_IRQ_SERIAL1 3 /* SuperIO Serial #1 */ |
| #define MICRODEV_FPGA_IRQ_SERIAL2 4 /* SuperIO Serial #2 */ |
| #define MICRODEV_FPGA_IRQ_MOUSE 12 /* SuperIO PS/2 Mouse */ |
| #define MICRODEV_FPGA_IRQ_IDE1 14 /* SuperIO IDE #1 */ |
| #define MICRODEV_FPGA_IRQ_IDE2 15 /* SuperIO IDE #2 */ |
| #define MICRODEV_FPGA_IRQ_USB_HC 16 /* on-board USB HC */ |
| #define MICRODEV_FPGA_IRQ_ETHERNET 18 /* on-board Ethnernet */ |
| |
| #define MICRODEV_IRQ_PCI_INTA 8 |
| #define MICRODEV_IRQ_PCI_INTB 9 |
| #define MICRODEV_IRQ_PCI_INTC 10 |
| #define MICRODEV_IRQ_PCI_INTD 11 |
| |
| #define __IO_PREFIX microdev |
| #include <asm/io_generic.h> |
| |
| #endif /* __ASM_SH_MICRODEV_H */ |
